Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 212 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi
new file mode 100644
index 000000000..e32d0c36f
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href-stuib.dtsi
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 ST-Ericsson AB
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&ab8500_ldo_aux1_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&prox_stuib_mode>, <&hall_stuib_mode>;
+
+		button@139 {
+			/* Proximity sensor */
+			gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>;
+			linux,code = <11>; /* SW_FRONT_PROXIMITY */
+			label = "SFH7741 Proximity Sensor";
+		};
+		button@145 {
+			/* Hall sensor */
+			gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+			linux,code = <0>; /* SW_LID */
+			label = "HED54XXU11 Hall Effect Sensor";
+		};
+	};
+
+	soc {
+		i2c@80004000 {
+			stmpe1601: stmpe1601@40 {
+				compatible = "st,stmpe1601";
+				reg = <0x40>;
+				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-parent = <&gpio6>;
+				interrupt-controller;
+				vcc-supply = <&db8500_vsmps2_reg>;
+				vio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&stmpe_stuib_mode>;
+
+				wakeup-source;
+				st,autosleep-timeout = <1024>;
+
+				stmpe_keypad {
+					compatible = "st,stmpe-keypad";
+
+					debounce-interval = <64>;
+					st,scan-count = <8>;
+					st,no-autorepeat;
+
+					linux,keymap = <0x205006b
+							0x4010074
+							0x3050072
+							0x1030004
+							0x502006a
+							0x500000a
+							0x5008b
+							0x706001c
+							0x405000b
+							0x6070003
+							0x3040067
+							0x303006c
+							0x60400e7
+							0x602009e
+							0x4020073
+							0x5050002
+							0x4030069
+							0x3020008>;
+				};
+			};
+		};
+
+		/* Sensors mounted on this board variant */
+		i2c@80128000 {
+			lis331dl@1c {
+				/* Accelerometer */
+				compatible = "st,lis331dl-accel";
+				st,drdy-int-pin = <1>;
+				reg = <0x1c>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&accel_stuib_mode>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+					     <19 IRQ_TYPE_EDGE_RISING>;
+			};
+			ak8974@f {
+				/* Magnetometer */
+				compatible = "asahi-kasei,ak8974";
+				reg = <0x0f>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&magneto_stuib_mode>;
+				interrupt-parent = <&gpio1>;
+				interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		i2c@80110000 {
+			bu21013_tp@5c {
+				compatible = "rohm,bu21013_tp";
+				reg = <0x5c>;
+				avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+				rohm,touch-max-x = <384>;
+				rohm,touch-max-y = <704>;
+				rohm,flip-y;
+				pinctrl-names = "default";
+				pinctrl-0 = <&touch_rohm_mode>;
+			};
+
+			bu21013_tp@5d {
+				compatible = "rohm,bu21013_tp";
+				reg = <0x5d>;
+				avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+				rohm,touch-max-x = <384>;
+				rohm,touch-max-y = <704>;
+				rohm,flip-y;
+				pinctrl-names = "default";
+				pinctrl-0 = <&touch_rohm_mode>;
+			};
+		};
+
+		pinctrl {
+			/* Pull up this GPIO pin */
+			stmpe {
+				stmpe_stuib_mode: stmpe_stuib {
+					stuib_cfg {
+						ste,pins = "GPIO218_AH11";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			prox {
+				prox_stuib_mode: prox_stuib {
+					stuib_cfg {
+						pins = "GPIO217_AH12";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			hall {
+				hall_stuib_mode: stuib_tvk {
+					stuib_cfg {
+						pins = "GPIO145_C13";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			accelerometer {
+				accel_stuib_mode: accel_stuib {
+					/* Accelerometer interrupt lines 1 & 2 */
+					stuib_cfg {
+						pins = "GPIO82_C1", "GPIO83_D3";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			magnetometer {
+				magneto_stuib_mode: magneto_stuib {
+					/* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
+					stuib_cfg1 {
+						pins = "GPIO31_V3";
+						ste,config = <&gpio_in_pu>;
+					};
+					stuib_cfg2 {
+						pins = "GPIO32_V2";
+						ste,config = <&gpio_in_pd>;
+					};
+				};
+			};
+			touch {
+				touch_rohm_mode: touch_rohm {
+					/*
+					 * ROHM touch screen uses GPIO 143 for
+					 * RST1, GPIO 146 for RST2 and
+					 * GPIO 67 for interrupts. Pull-up
+					 * the IRQ line and drive both
+					 * reset signals low.
+					 */
+					stuib_cfg1 {
+						pins = "GPIO143_D12", "GPIO146_D13";
+						ste,config = <&gpio_out_lo>;
+					};
+					stuib_cfg2 {
+						pins = "GPIO67_G2";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+		};
+
+		mcde@a0350000 {
+			status = "okay";
+
+			dsi@a0351000 {
+				panel {
+					compatible = "samsung,s6d16d0";
+					reg = <0>;
+					vdd1-supply = <&ab8500_ldo_aux1_reg>;
+					reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+				};
+			};
+		};
+	};
+};