Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 74 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
new file mode 100644
index 000000000..52c56ed17
--- /dev/null
+++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * Device Tree for the HREF version 60 or later with the ST UIB
+ */
+
+/dts-v1/;
+#include "ste-db8500.dtsi"
+#include "ste-hrefv60plus.dtsi"
+#include "ste-href-stuib.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (v60+) and ST UIB";
+	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+
+	/* ST6G3244ME level translator for 1.8/2.9 V */
+	vmmci: regulator-gpio {
+		compatible = "regulator-gpio";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-name = "mmci-reg";
+		regulator-type = "voltage";
+
+		startup-delay-us = <100>;
+
+		states = <1800000 0x1
+			  2900000 0x0>;
+
+		gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmci_default_mode>;
+	};
+
+	soc {
+		/* Reset line for the BU21013 touchscreen */
+		i2c@80110000 {
+			/* Only one of these will be used */
+			bu21013_tp@5c {
+				interrupt-parent = <&gpio2>;
+				interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+				touch-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+				reset-gpios = <&gpio4 17 GPIO_LINE_OPEN_DRAIN>;
+			};
+			bu21013_tp@5d {
+				interrupt-parent = <&gpio2>;
+				interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+				touch-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+				reset-gpios = <&gpio4 17 GPIO_LINE_OPEN_DRAIN>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	vmmci {
+		vmmci_default_mode: vmmc_default {
+			/* VMMCI level-shifter enable */
+			default_hrefv60_cfg2 {
+				pins = "GPIO169_D22";
+				ste,config = <&gpio_out_hi>;
+			};
+			/* VMMCI level-shifter voltage select */
+			default_hrefv60_cfg3 {
+				pins = "GPIO5_AG6";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+};