Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 101 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts
new file mode 100644
index 000000000..2bc92ef3a
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
+	compatible = "st,stm32mp157c-dk2", "st,stm32mp157";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &uart7;
+		serial3 = &usart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cryp1 {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+	phy-dsi-supply = <&reg18>;
+
+	ports {
+		port@0 {
+			reg = <0>;
+			dsi_in: endpoint {
+				remote-endpoint = <&ltdc_ep1_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "orisetech,otm8009a";
+		reg = <0>;
+		reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
+		power-supply = <&v3v3>;
+		status = "okay";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	touchscreen@38 {
+		compatible = "focaltech,ft6236";
+		reg = <0x38>;
+		interrupts = <2 2>;
+		interrupt-parent = <&gpiof>;
+		interrupt-controller;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <800>;
+		status = "okay";
+	};
+};
+
+&ltdc {
+	status = "okay";
+
+	port {
+		ltdc_ep1_out: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
+&usart2 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart2_pins_c>;
+	pinctrl-1 = <&usart2_sleep_pins_c>;
+	pinctrl-2 = <&usart2_idle_pins_c>;
+	status = "disabled";
+};