Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 90 insertions, 0 deletions

diff --git a/arch/arm/mach-artpec/Kconfig b/arch/arm/mach-artpec/Kconfig
new file mode 100644
index 000000000..b9a6452d6
--- /dev/null
+++ b/arch/arm/mach-artpec/Kconfig
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig ARCH_ARTPEC
+	bool "Axis Communications ARM based ARTPEC SoCs"
+	depends on ARCH_MULTI_V7
+
+if ARCH_ARTPEC
+
+config MACH_ARTPEC6
+	bool "Axis ARTPEC-6 ARM Cortex A9 Platform"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GLOBAL_TIMER
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD if SMP
+	select MFD_SYSCON
+	help
+	  Support for Axis ARTPEC-6 ARM Cortex A9 Platform
+
+endif
diff --git a/arch/arm/mach-artpec/Makefile b/arch/arm/mach-artpec/Makefile
new file mode 100644
index 000000000..fac519012
--- /dev/null
+++ b/arch/arm/mach-artpec/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_MACH_ARTPEC6)		:= board-artpec6.o
diff --git a/arch/arm/mach-artpec/board-artpec6.c b/arch/arm/mach-artpec/board-artpec6.c
new file mode 100644
index 000000000..d3cf3e860
--- /dev/null
+++ b/arch/arm/mach-artpec/board-artpec6.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ARTPEC-6 device support.
+ */
+
+#include <linux/amba/bus.h>
+#include <linux/clocksource.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+#include <linux/smp.h>
+#include <asm/smp_scu.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/psci.h>
+#include <linux/arm-smccc.h>
+
+
+#define ARTPEC6_DMACFG_REGNUM 0x10
+#define ARTPEC6_DMACFG_UARTS_BURST 0xff
+
+#define SECURE_OP_L2C_WRITEREG 0xb4000001
+
+static void __init artpec6_init_machine(void)
+{
+	struct regmap *regmap;
+
+	regmap = syscon_regmap_lookup_by_compatible("axis,artpec6-syscon");
+
+	if (!IS_ERR(regmap)) {
+		/* Use PL011 DMA Burst Request signal instead of DMA
+		 *  Single Request
+		 */
+		regmap_write(regmap, ARTPEC6_DMACFG_REGNUM,
+			     ARTPEC6_DMACFG_UARTS_BURST);
+	};
+}
+
+static void artpec6_l2c310_write_sec(unsigned long val, unsigned reg)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(SECURE_OP_L2C_WRITEREG, reg, val, 0,
+		      0, 0, 0, 0, &res);
+
+	WARN_ON(res.a0);
+}
+
+static const char * const artpec6_dt_match[] = {
+	"axis,artpec6",
+	NULL
+};
+
+DT_MACHINE_START(ARTPEC6, "Axis ARTPEC-6 Platform")
+	.l2c_aux_val	= 0x0C000000,
+	.l2c_aux_mask	= 0xF3FFFFFF,
+	.l2c_write_sec  = artpec6_l2c310_write_sec,
+	.init_machine	= artpec6_init_machine,
+	.dt_compat	= artpec6_dt_match,
+MACHINE_END