Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 399 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c
new file mode 100644
index 000000000..0827acb60
--- /dev/null
+++ b/arch/arm/mach-omap2/cm2xxx.c
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * OMAP2xxx CM module functions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2008-2010, 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include "prm2xxx.h"
+#include "cm.h"
+#include "cm2xxx.h"
+#include "cm-regbits-24xx.h"
+#include "clockdomain.h"
+
+/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */
+#define DPLL_AUTOIDLE_DISABLE				0x0
+#define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP		0x3
+
+/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */
+#define OMAP2XXX_APLL_AUTOIDLE_DISABLE			0x0
+#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP		0x3
+
+/* CM_IDLEST_PLL bit value offset for APLLs (OMAP2xxx only) */
+#define EN_APLL_LOCKED					3
+
+static const u8 omap2xxx_cm_idlest_offs[] = {
+	CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4
+};
+
+/*
+ *
+ */
+
+static void _write_clktrctrl(u8 c, s16 module, u32 mask)
+{
+	u32 v;
+
+	v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
+	v &= ~mask;
+	v |= c << __ffs(mask);
+	omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
+}
+
+static bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
+{
+	u32 v;
+
+	v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
+	v &= mask;
+	v >>= __ffs(mask);
+
+	return (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
+}
+
+static void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
+{
+	_write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
+}
+
+static void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
+{
+	_write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
+}
+
+/*
+ * DPLL autoidle control
+ */
+
+static void _omap2xxx_set_dpll_autoidle(u8 m)
+{
+	u32 v;
+
+	v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
+	v &= ~OMAP24XX_AUTO_DPLL_MASK;
+	v |= m << OMAP24XX_AUTO_DPLL_SHIFT;
+	omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
+}
+
+void omap2xxx_cm_set_dpll_disable_autoidle(void)
+{
+	_omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP);
+}
+
+void omap2xxx_cm_set_dpll_auto_low_power_stop(void)
+{
+	_omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE);
+}
+
+/*
+ * APLL control
+ */
+
+static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask)
+{
+	u32 v;
+
+	v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
+	v &= ~mask;
+	v |= m << __ffs(mask);
+	omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
+}
+
+void omap2xxx_cm_set_apll54_disable_autoidle(void)
+{
+	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
+				    OMAP24XX_AUTO_54M_MASK);
+}
+
+void omap2xxx_cm_set_apll54_auto_low_power_stop(void)
+{
+	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
+				    OMAP24XX_AUTO_54M_MASK);
+}
+
+void omap2xxx_cm_set_apll96_disable_autoidle(void)
+{
+	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
+				    OMAP24XX_AUTO_96M_MASK);
+}
+
+void omap2xxx_cm_set_apll96_auto_low_power_stop(void)
+{
+	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
+				    OMAP24XX_AUTO_96M_MASK);
+}
+
+/* Enable an APLL if off */
+static int _omap2xxx_apll_enable(u8 enable_bit, u8 status_bit)
+{
+	u32 v, m;
+
+	m = EN_APLL_LOCKED << enable_bit;
+
+	v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	if (v & m)
+		return 0;   /* apll already enabled */
+
+	v |= m;
+	omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN);
+
+	omap2xxx_cm_wait_module_ready(0, PLL_MOD, 1, status_bit);
+
+	/*
+	 * REVISIT: Should we return an error code if
+	 * omap2xxx_cm_wait_module_ready() fails?
+	 */
+	return 0;
+}
+
+/* Stop APLL */
+static void _omap2xxx_apll_disable(u8 enable_bit)
+{
+	u32 v;
+
+	v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	v &= ~(EN_APLL_LOCKED << enable_bit);
+	omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN);
+}
+
+/* Enable an APLL if off */
+int omap2xxx_cm_apll54_enable(void)
+{
+	return _omap2xxx_apll_enable(OMAP24XX_EN_54M_PLL_SHIFT,
+				     OMAP24XX_ST_54M_APLL_SHIFT);
+}
+
+/* Enable an APLL if off */
+int omap2xxx_cm_apll96_enable(void)
+{
+	return _omap2xxx_apll_enable(OMAP24XX_EN_96M_PLL_SHIFT,
+				     OMAP24XX_ST_96M_APLL_SHIFT);
+}
+
+/* Stop APLL */
+void omap2xxx_cm_apll54_disable(void)
+{
+	_omap2xxx_apll_disable(OMAP24XX_EN_54M_PLL_SHIFT);
+}
+
+/* Stop APLL */
+void omap2xxx_cm_apll96_disable(void)
+{
+	_omap2xxx_apll_disable(OMAP24XX_EN_96M_PLL_SHIFT);
+}
+
+/**
+ * omap2xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components
+ * @idlest_reg: CM_IDLEST* virtual address
+ * @prcm_inst: pointer to an s16 to return the PRCM instance offset
+ * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID
+ *
+ * XXX This function is only needed until absolute register addresses are
+ * removed from the OMAP struct clk records.
+ */
+static int omap2xxx_cm_split_idlest_reg(struct clk_omap_reg *idlest_reg,
+					s16 *prcm_inst,
+					u8 *idlest_reg_id)
+{
+	unsigned long offs;
+	u8 idlest_offs;
+	int i;
+
+	idlest_offs = idlest_reg->offset & 0xff;
+	for (i = 0; i < ARRAY_SIZE(omap2xxx_cm_idlest_offs); i++) {
+		if (idlest_offs == omap2xxx_cm_idlest_offs[i]) {
+			*idlest_reg_id = i + 1;
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(omap2xxx_cm_idlest_offs))
+		return -EINVAL;
+
+	offs = idlest_reg->offset;
+	offs &= 0xff00;
+	*prcm_inst = offs;
+
+	return 0;
+}
+
+/*
+ *
+ */
+
+/**
+ * omap2xxx_cm_wait_module_ready - wait for a module to leave idle or standby
+ * @part: PRCM partition, ignored for OMAP2
+ * @prcm_mod: PRCM module offset
+ * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
+ * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
+ *
+ * Wait for the PRCM to indicate that the module identified by
+ * (@prcm_mod, @idlest_id, @idlest_shift) is clocked.  Return 0 upon
+ * success or -EBUSY if the module doesn't enable in time.
+ */
+int omap2xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id,
+				  u8 idlest_shift)
+{
+	int ena = 0, i = 0;
+	u8 cm_idlest_reg;
+	u32 mask;
+
+	if (!idlest_id || (idlest_id > ARRAY_SIZE(omap2xxx_cm_idlest_offs)))
+		return -EINVAL;
+
+	cm_idlest_reg = omap2xxx_cm_idlest_offs[idlest_id - 1];
+
+	mask = 1 << idlest_shift;
+	ena = mask;
+
+	omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) &
+			    mask) == ena), MAX_MODULE_READY_TIME, i);
+
+	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+
+/* Clockdomain low-level functions */
+
+static void omap2xxx_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+	omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+				       clkdm->clktrctrl_mask);
+}
+
+static void omap2xxx_clkdm_deny_idle(struct clockdomain *clkdm)
+{
+	omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+					clkdm->clktrctrl_mask);
+}
+
+static int omap2xxx_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+	bool hwsup = false;
+
+	if (!clkdm->clktrctrl_mask)
+		return 0;
+
+	hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+					      clkdm->clktrctrl_mask);
+	if (!hwsup && clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+		omap2xxx_clkdm_wakeup(clkdm);
+
+	return 0;
+}
+
+static int omap2xxx_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+	bool hwsup = false;
+
+	if (!clkdm->clktrctrl_mask)
+		return 0;
+
+	hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+					      clkdm->clktrctrl_mask);
+
+	if (!hwsup && clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
+		omap2xxx_clkdm_sleep(clkdm);
+
+	return 0;
+}
+
+struct clkdm_ops omap2_clkdm_operations = {
+	.clkdm_add_wkdep	= omap2_clkdm_add_wkdep,
+	.clkdm_del_wkdep	= omap2_clkdm_del_wkdep,
+	.clkdm_read_wkdep	= omap2_clkdm_read_wkdep,
+	.clkdm_clear_all_wkdeps	= omap2_clkdm_clear_all_wkdeps,
+	.clkdm_sleep		= omap2xxx_clkdm_sleep,
+	.clkdm_wakeup		= omap2xxx_clkdm_wakeup,
+	.clkdm_allow_idle	= omap2xxx_clkdm_allow_idle,
+	.clkdm_deny_idle	= omap2xxx_clkdm_deny_idle,
+	.clkdm_clk_enable	= omap2xxx_clkdm_clk_enable,
+	.clkdm_clk_disable	= omap2xxx_clkdm_clk_disable,
+};
+
+int omap2xxx_cm_fclks_active(void)
+{
+	u32 f1, f2;
+
+	f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+
+	return (f1 | f2) ? 1 : 0;
+}
+
+int omap2xxx_cm_mpu_retention_allowed(void)
+{
+	u32 l;
+
+	/* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
+	l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK |
+		 OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK |
+		 OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK))
+		return 0;
+	/* Check for UART3. */
+	l = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+	if (l & OMAP24XX_EN_UART3_MASK)
+		return 0;
+
+	return 1;
+}
+
+u32 omap2xxx_cm_get_core_clk_src(void)
+{
+	u32 v;
+
+	v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	v &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	return v;
+}
+
+u32 omap2xxx_cm_get_core_pll_config(void)
+{
+	return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+}
+
+void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm)
+{
+	u32 tmp;
+
+	omap2_cm_write_mod_reg(mpu, MPU_MOD, CM_CLKSEL);
+	omap2_cm_write_mod_reg(dsp, OMAP24XX_DSP_MOD, CM_CLKSEL);
+	omap2_cm_write_mod_reg(gfx, GFX_MOD, CM_CLKSEL);
+	tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) &
+		OMAP24XX_CLKSEL_DSS2_MASK;
+	omap2_cm_write_mod_reg(core | tmp, CORE_MOD, CM_CLKSEL1);
+	if (mdm)
+		omap2_cm_write_mod_reg(mdm, OMAP2430_MDM_MOD, CM_CLKSEL);
+}
+
+/*
+ *
+ */
+
+static const struct cm_ll_data omap2xxx_cm_ll_data = {
+	.split_idlest_reg	= &omap2xxx_cm_split_idlest_reg,
+	.wait_module_ready	= &omap2xxx_cm_wait_module_ready,
+};
+
+int __init omap2xxx_cm_init(const struct omap_prcm_init_data *data)
+{
+	return cm_register(&omap2xxx_cm_ll_data);
+}
+
+static void __exit omap2xxx_cm_exit(void)
+{
+	cm_unregister(&omap2xxx_cm_ll_data);
+}
+__exitcall(omap2xxx_cm_exit);