Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 245 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
new file mode 100644
index 000000000..3d803f718
--- /dev/null
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -0,0 +1,245 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * OMAP2xxx/3xxx-common Power/Reset Management (PRM) register definitions
+ *
+ * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * The PRM hardware modules on the OMAP2/3 are quite similar to each
+ * other.  The PRM on OMAP4 has a new register layout, and is handled
+ * in a separate file.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM2XXX_3XXX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM2XXX_3XXX_H
+
+#include "prcm-common.h"
+#include "prm.h"
+
+/*
+ * Module specific PRM register offsets from PRM_BASE + domain offset
+ *
+ * Use prm_{read,write}_mod_reg() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * {PM,RM}_* on both OMAP2/3 SoC families..  (The exceptions are the
+ * IRQSTATUS and IRQENABLE bits.)
+ */
+
+/* Register offsets appearing on both OMAP2 and OMAP3 */
+
+#define OMAP2_RM_RSTCTRL				0x0050
+#define OMAP2_RM_RSTTIME				0x0054
+#define OMAP2_RM_RSTST					0x0058
+#define OMAP2_PM_PWSTCTRL				0x00e0
+#define OMAP2_PM_PWSTST					0x00e4
+
+#define PM_WKEN						0x00a0
+#define PM_WKEN1					PM_WKEN
+#define PM_WKST						0x00b0
+#define PM_WKST1					PM_WKST
+#define PM_WKDEP					0x00c8
+#define PM_EVGENCTRL					0x00d4
+#define PM_EVGENONTIM					0x00d8
+#define PM_EVGENOFFTIM					0x00dc
+
+
+#ifndef __ASSEMBLER__
+
+#include <linux/io.h>
+#include "powerdomain.h"
+
+/* Power/reset management domain register get/set */
+static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
+{
+	return readl_relaxed(prm_base.va + module + idx);
+}
+
+static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+	writel_relaxed(val, prm_base.va + module + idx);
+}
+
+/* Read-modify-write a register in a PRM module. Caller must lock */
+static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module,
+					     s16 idx)
+{
+	u32 v;
+
+	v = omap2_prm_read_mod_reg(module, idx);
+	v &= ~mask;
+	v |= bits;
+	omap2_prm_write_mod_reg(v, module, idx);
+
+	return v;
+}
+
+/* Read a PRM register, AND it, and shift the result down to bit 0 */
+static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+	u32 v;
+
+	v = omap2_prm_read_mod_reg(domain, idx);
+	v &= mask;
+	v >>= __ffs(mask);
+
+	return v;
+}
+
+static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+	return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx);
+}
+
+static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+	return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
+}
+
+/* These omap2_ PRM functions apply to both OMAP2 and 3 */
+int omap2_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset);
+int omap2_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod,
+			       u16 offset);
+int omap2_prm_deassert_hardreset(u8 rst_shift, u8 st_shift, u8 part,
+				 s16 prm_mod, u16 reset_offset,
+				 u16 st_offset);
+
+extern int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
+extern int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
+extern int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm);
+extern int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+				    u8 pwrst);
+extern int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+				     u8 pwrst);
+extern int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
+extern int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank);
+extern int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst);
+extern int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm);
+
+extern int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1,
+				 struct clockdomain *clkdm2);
+extern int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1,
+				 struct clockdomain *clkdm2);
+extern int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1,
+				  struct clockdomain *clkdm2);
+extern int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm);
+
+#endif /* __ASSEMBLER */
+
+/*
+ * Bits common to specific registers
+ *
+ * The 3430 register and bit names are generally used,
+ * since they tend to make more sense
+ */
+
+/* PM_EVGENONTIM_MPU */
+/* Named PM_EVEGENONTIM_MPU on the 24XX */
+#define OMAP_ONTIMEVAL_SHIFT				0
+#define OMAP_ONTIMEVAL_MASK				(0xffffffff << 0)
+
+/* PM_EVGENOFFTIM_MPU */
+/* Named PM_EVEGENOFFTIM_MPU on the 24XX */
+#define OMAP_OFFTIMEVAL_SHIFT				0
+#define OMAP_OFFTIMEVAL_MASK				(0xffffffff << 0)
+
+/* PRM_CLKSETUP and PRCM_VOLTSETUP */
+/* Named PRCM_CLKSSETUP on the 24XX */
+#define OMAP_SETUP_TIME_SHIFT				0
+#define OMAP_SETUP_TIME_MASK				(0xffff << 0)
+
+/* PRM_CLKSRC_CTRL */
+/* Named PRCM_CLKSRC_CTRL on the 24XX */
+#define OMAP_SYSCLKDIV_SHIFT				6
+#define OMAP_SYSCLKDIV_MASK				(0x3 << 6)
+#define OMAP_SYSCLKDIV_WIDTH				2
+#define OMAP_AUTOEXTCLKMODE_SHIFT			3
+#define OMAP_AUTOEXTCLKMODE_MASK			(0x3 << 3)
+#define OMAP_SYSCLKSEL_SHIFT				0
+#define OMAP_SYSCLKSEL_MASK				(0x3 << 0)
+
+/* PM_EVGENCTRL_MPU */
+#define OMAP_OFFLOADMODE_SHIFT				3
+#define OMAP_OFFLOADMODE_MASK				(0x3 << 3)
+#define OMAP_ONLOADMODE_SHIFT				1
+#define OMAP_ONLOADMODE_MASK				(0x3 << 1)
+#define OMAP_ENABLE_MASK				(1 << 0)
+
+/* PRM_RSTTIME */
+/* Named RM_RSTTIME_WKUP on the 24xx */
+#define OMAP_RSTTIME2_SHIFT				8
+#define OMAP_RSTTIME2_MASK				(0x1f << 8)
+#define OMAP_RSTTIME1_SHIFT				0
+#define OMAP_RSTTIME1_MASK				(0xff << 0)
+
+/* PRM_RSTCTRL */
+/* Named RM_RSTCTRL_WKUP on the 24xx */
+/* 2420 calls RST_DPLL3 'RST_DPLL' */
+#define OMAP_RST_DPLL3_MASK				(1 << 2)
+#define OMAP_RST_GS_MASK				(1 << 1)
+
+
+/*
+ * Bits common to module-shared registers
+ *
+ * Not all registers of a particular type support all of these bits -
+ * check TRM if you are unsure
+ */
+
+/*
+ * 24XX: RM_RSTST_MPU and RM_RSTST_DSP - on 24XX, 'COREDOMAINWKUP_RST' is
+ *	 called 'COREWKUP_RST'
+ *
+ * 3430: RM_RSTST_IVA2, RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSS,
+ *	 RM_RSTST_CAM, RM_RSTST_PER, RM_RSTST_NEON
+ */
+#define OMAP_COREDOMAINWKUP_RST_MASK			(1 << 3)
+
+/*
+ * 24XX: RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSP
+ *
+ * 2430: RM_RSTST_MDM
+ *
+ * 3430: RM_RSTST_CORE, RM_RSTST_EMU
+ */
+#define OMAP_DOMAINWKUP_RST_MASK			(1 << 2)
+
+/*
+ * 24XX: RM_RSTST_MPU, RM_RSTST_WKUP, RM_RSTST_DSP
+ *	 On 24XX, 'GLOBALWARM_RST' is called 'GLOBALWMPU_RST'.
+ *
+ * 2430: RM_RSTST_MDM
+ *
+ * 3430: RM_RSTST_CORE, RM_RSTST_EMU
+ */
+#define OMAP_GLOBALWARM_RST_SHIFT			1
+#define OMAP_GLOBALWARM_RST_MASK			(1 << 1)
+#define OMAP_GLOBALCOLD_RST_SHIFT			0
+#define OMAP_GLOBALCOLD_RST_MASK			(1 << 0)
+
+/*
+ * 24XX: PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_CORE, PM_WKDEP_DSP
+ *	 2420 TRM sometimes uses "EN_WAKEUP" instead of "EN_WKUP"
+ *
+ * 2430: PM_WKDEP_MDM
+ *
+ * 3430: PM_WKDEP_IVA2, PM_WKDEP_GFX, PM_WKDEP_DSS, PM_WKDEP_CAM,
+ *	 PM_WKDEP_PER
+ */
+#define OMAP_EN_WKUP_SHIFT				4
+#define OMAP_EN_WKUP_MASK				(1 << 4)
+
+/*
+ * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
+ *	 PM_PWSTCTRL_DSP
+ *
+ * 2430: PM_PWSTCTRL_MDM
+ *
+ * 3430: PM_PWSTCTRL_IVA2, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
+ *	 PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER,
+ *	 PM_PWSTCTRL_NEON
+ */
+#define OMAP_LOGICRETSTATE_MASK				(1 << 2)
+
+
+#endif