Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 172 insertions, 0 deletions

diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
new file mode 100644
index 000000000..432fc8357
--- /dev/null
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+ *
+ * Marvell Orion-VoIP FXO Reference Design Setup
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/platform_data/dsa.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include "common.h"
+#include "mpp.h"
+#include "orion5x.h"
+
+/*****************************************************************************
+ * RD-88F5181L FXO Info
+ ****************************************************************************/
+/*
+ * 8M NOR flash Device bus boot chip select
+ */
+#define RD88F5181L_FXO_NOR_BOOT_BASE		0xff800000
+#define RD88F5181L_FXO_NOR_BOOT_SIZE		SZ_8M
+
+
+/*****************************************************************************
+ * 8M NOR Flash on Device bus Boot chip select
+ ****************************************************************************/
+static struct physmap_flash_data rd88f5181l_fxo_nor_boot_flash_data = {
+	.width		= 1,
+};
+
+static struct resource rd88f5181l_fxo_nor_boot_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= RD88F5181L_FXO_NOR_BOOT_BASE,
+	.end		= RD88F5181L_FXO_NOR_BOOT_BASE +
+			  RD88F5181L_FXO_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device rd88f5181l_fxo_nor_boot_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &rd88f5181l_fxo_nor_boot_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &rd88f5181l_fxo_nor_boot_flash_resource,
+};
+
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static unsigned int rd88f5181l_fxo_mpp_modes[] __initdata = {
+	MPP0_GPIO,		/* LED1 CardBus LED (front panel) */
+	MPP1_GPIO,		/* PCI_intA */
+	MPP2_GPIO,		/* Hard Reset / Factory Init*/
+	MPP3_GPIO,		/* FXS or DAA select */
+	MPP4_GPIO,		/* LED6 - phone LED (front panel) */
+	MPP5_GPIO,		/* LED5 - phone LED (front panel) */
+	MPP6_PCI_CLK,		/* CPU PCI refclk */
+	MPP7_PCI_CLK,		/* PCI/PCIe refclk */
+	MPP8_GPIO,		/* CardBus reset */
+	MPP9_GPIO,		/* GE_RXERR */
+	MPP10_GPIO,		/* LED2 MiniPCI LED (front panel) */
+	MPP11_GPIO,		/* Lifeline control */
+	MPP12_GIGE,		/* GE_TXD[4] */
+	MPP13_GIGE,		/* GE_TXD[5] */
+	MPP14_GIGE,		/* GE_TXD[6] */
+	MPP15_GIGE,		/* GE_TXD[7] */
+	MPP16_GIGE,		/* GE_RXD[4] */
+	MPP17_GIGE,		/* GE_RXD[5] */
+	MPP18_GIGE,		/* GE_RXD[6] */
+	MPP19_GIGE,		/* GE_RXD[7] */
+	0,
+};
+
+static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_NONE,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
+};
+
+static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = {
+	.port_names[0]	= "lan2",
+	.port_names[1]	= "lan1",
+	.port_names[2]	= "wan",
+	.port_names[3]	= "cpu",
+	.port_names[5]	= "lan4",
+	.port_names[7]	= "lan3",
+};
+
+static void __init rd88f5181l_fxo_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(rd88f5181l_fxo_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_eth_init(&rd88f5181l_fxo_eth_data);
+	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_chip_data);
+	orion5x_uart0_init();
+
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    RD88F5181L_FXO_NOR_BOOT_BASE,
+				    RD88F5181L_FXO_NOR_BOOT_SIZE);
+	platform_device_register(&rd88f5181l_fxo_nor_boot_flash);
+}
+
+static int __init
+rd88f5181l_fxo_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	/*
+	 * Mini-PCI / Cardbus slot.
+	 */
+	return gpio_to_irq(1);
+}
+
+static struct hw_pci rd88f5181l_fxo_pci __initdata = {
+	.nr_controllers	= 2,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= rd88f5181l_fxo_pci_map_irq,
+};
+
+static int __init rd88f5181l_fxo_pci_init(void)
+{
+	if (machine_is_rd88f5181l_fxo()) {
+		orion5x_pci_set_cardbus_mode();
+		pci_common_init(&rd88f5181l_fxo_pci);
+	}
+
+	return 0;
+}
+subsys_initcall(rd88f5181l_fxo_pci_init);
+
+MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
+	/* Maintainer: Nicolas Pitre <nico@marvell.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
+	.init_machine	= rd88f5181l_fxo_init,
+	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
+	.init_irq	= orion5x_init_irq,
+	.init_time	= orion5x_timer_init,
+	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
+MACHINE_END