Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 422 insertions, 0 deletions

diff --git a/arch/arm/mach-s3c/mach-anubis.c b/arch/arm/mach-s3c/mach-anubis.c
new file mode 100644
index 000000000..4536f3e66
--- /dev/null
+++ b/arch/arm/mach-s3c/mach-anubis.c
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2003-2009 Simtec Electronics
+//	http://armlinux.simtec.co.uk/
+//	Ben Dooks <ben@simtec.co.uk>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand-ecc-sw-hamming.h>
+#include <linux/mtd/partitions.h>
+
+#include <net/ax88796.h>
+
+#include "devs.h"
+#include "cpu.h"
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+
+#include "anubis.h"
+#include "s3c24xx.h"
+#include "simtec.h"
+
+#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
+
+static struct map_desc anubis_iodesc[] __initdata = {
+  /* ISA IO areas */
+
+  {
+	.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+	.pfn		= __phys_to_pfn(0x0),
+	.length		= SZ_4M,
+	.type		= MT_DEVICE,
+  },
+
+  /* we could possibly compress the next set down into a set of smaller tables
+   * pagetables, but that would mean using an L2 section, and it still means
+   * we cannot actually feed the same register to an LDR due to 16K spacing
+   */
+
+  /* CPLD control registers */
+
+  {
+	.virtual	= (u32)ANUBIS_VA_CTRL1,
+	.pfn		= __phys_to_pfn(ANUBIS_PA_CTRL1),
+	.length		= SZ_4K,
+	.type		= MT_DEVICE,
+  }, {
+	.virtual	= (u32)ANUBIS_VA_IDREG,
+	.pfn		= __phys_to_pfn(ANUBIS_PA_IDREG),
+	.length		= SZ_4K,
+	.type		= MT_DEVICE,
+  },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+	},
+	[1] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+	},
+};
+
+/* NAND Flash on Anubis board */
+
+static int external_map[]   = { 2 };
+static int chip0_map[]      = { 0 };
+static int chip1_map[]      = { 1 };
+
+static struct mtd_partition __initdata anubis_default_nand_part[] = {
+	[0] = {
+		.name	= "Boot Agent",
+		.size	= SZ_16K,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "/boot",
+		.size	= SZ_4M - SZ_16K,
+		.offset	= SZ_16K,
+	},
+	[2] = {
+		.name	= "user1",
+		.offset	= SZ_4M,
+		.size	= SZ_32M - SZ_4M,
+	},
+	[3] = {
+		.name	= "user2",
+		.offset	= SZ_32M,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct mtd_partition __initdata anubis_default_nand_part_large[] = {
+	[0] = {
+		.name	= "Boot Agent",
+		.size	= SZ_128K,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "/boot",
+		.size	= SZ_4M - SZ_128K,
+		.offset	= SZ_128K,
+	},
+	[2] = {
+		.name	= "user1",
+		.offset	= SZ_4M,
+		.size	= SZ_32M - SZ_4M,
+	},
+	[3] = {
+		.name	= "user2",
+		.offset	= SZ_32M,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+/* the Anubis has 3 selectable slots for nand-flash, the two
+ * on-board chip areas, as well as the external slot.
+ *
+ * Note, there is no current hot-plug support for the External
+ * socket.
+*/
+
+static struct s3c2410_nand_set __initdata anubis_nand_sets[] = {
+	[1] = {
+		.name		= "External",
+		.nr_chips	= 1,
+		.nr_map		= external_map,
+		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
+		.partitions	= anubis_default_nand_part,
+	},
+	[0] = {
+		.name		= "chip0",
+		.nr_chips	= 1,
+		.nr_map		= chip0_map,
+		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
+		.partitions	= anubis_default_nand_part,
+	},
+	[2] = {
+		.name		= "chip1",
+		.nr_chips	= 1,
+		.nr_map		= chip1_map,
+		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
+		.partitions	= anubis_default_nand_part,
+	},
+};
+
+static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
+{
+	unsigned int tmp;
+
+	slot = set->nr_map[slot] & 3;
+
+	pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
+		 slot, set, set->nr_map);
+
+	tmp = __raw_readb(ANUBIS_VA_CTRL1);
+	tmp &= ~ANUBIS_CTRL1_NANDSEL;
+	tmp |= slot;
+
+	pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
+
+	__raw_writeb(tmp, ANUBIS_VA_CTRL1);
+}
+
+static struct s3c2410_platform_nand __initdata anubis_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 55,
+	.twrph1		= 40,
+	.nr_sets	= ARRAY_SIZE(anubis_nand_sets),
+	.sets		= anubis_nand_sets,
+	.select_chip	= anubis_nand_select,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
+};
+
+/* IDE channels */
+
+static struct pata_platform_info anubis_ide_platdata = {
+	.ioport_shift	= 5,
+};
+
+static struct resource anubis_ide0_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_CS3, 8 * 32),
+	[2] = DEFINE_RES_MEM(S3C2410_CS3 + (1 << 26) + (6 * 32), 32),
+	[3] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
+};
+
+static struct platform_device anubis_device_ide0 = {
+	.name		= "pata_platform",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(anubis_ide0_resource),
+	.resource	= anubis_ide0_resource,
+	.dev	= {
+		.platform_data = &anubis_ide_platdata,
+		.coherent_dma_mask = ~0,
+	},
+};
+
+static struct resource anubis_ide1_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_CS4, 8 * 32),
+	[1] = DEFINE_RES_MEM(S3C2410_CS4 + (1 << 26) + (6 * 32), 32),
+	[2] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
+};
+
+static struct platform_device anubis_device_ide1 = {
+	.name		= "pata_platform",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(anubis_ide1_resource),
+	.resource	= anubis_ide1_resource,
+	.dev	= {
+		.platform_data = &anubis_ide_platdata,
+		.coherent_dma_mask = ~0,
+	},
+};
+
+/* Asix AX88796 10/100 ethernet controller */
+
+static struct ax_plat_data anubis_asix_platdata = {
+	.flags		= AXFLG_MAC_FROMDEV,
+	.wordlength	= 2,
+	.dcr_val	= 0x48,
+	.rcr_val	= 0x40,
+};
+
+static struct resource anubis_asix_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_CS5, 0x20 * 0x20),
+	[1] = DEFINE_RES_IRQ(ANUBIS_IRQ_ASIX),
+};
+
+static struct platform_device anubis_device_asix = {
+	.name		= "ax88796",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(anubis_asix_resource),
+	.resource	= anubis_asix_resource,
+	.dev		= {
+		.platform_data = &anubis_asix_platdata,
+	}
+};
+
+/* SM501 */
+
+static struct resource anubis_sm501_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_CS2, SZ_8M),
+	[1] = DEFINE_RES_MEM(S3C2410_CS2 + SZ_64M - SZ_2M, SZ_2M),
+	[2] = DEFINE_RES_IRQ(IRQ_EINT0),
+};
+
+static struct sm501_initdata anubis_sm501_initdata = {
+	.gpio_high	= {
+		.set	= 0x3F000000,		/* 24bit panel */
+		.mask	= 0x0,
+	},
+	.misc_timing	= {
+		.set	= 0x010100,		/* SDRAM timing */
+		.mask	= 0x1F1F00,
+	},
+	.misc_control	= {
+		.set	= SM501_MISC_PNL_24BIT,
+		.mask	= 0,
+	},
+
+	.devices	= SM501_USE_GPIO,
+
+	/* set the SDRAM and bus clocks */
+	.mclk		= 72 * MHZ,
+	.m1xclk		= 144 * MHZ,
+};
+
+static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
+	[0] = {
+		.bus_num	= 1,
+		.pin_scl	= 44,
+		.pin_sda	= 45,
+	},
+	[1] = {
+		.bus_num	= 2,
+		.pin_scl	= 40,
+		.pin_sda	= 41,
+	},
+};
+
+static struct sm501_platdata anubis_sm501_platdata = {
+	.init		= &anubis_sm501_initdata,
+	.gpio_base	= -1,
+	.gpio_i2c	= anubis_sm501_gpio_i2c,
+	.gpio_i2c_nr	= ARRAY_SIZE(anubis_sm501_gpio_i2c),
+};
+
+static struct platform_device anubis_device_sm501 = {
+	.name		= "sm501",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(anubis_sm501_resource),
+	.resource	= anubis_sm501_resource,
+	.dev		= {
+		.platform_data = &anubis_sm501_platdata,
+	},
+};
+
+/* Standard Anubis devices */
+
+static struct platform_device *anubis_devices[] __initdata = {
+	&s3c2410_device_dclk,
+	&s3c_device_ohci,
+	&s3c_device_wdt,
+	&s3c_device_adc,
+	&s3c_device_i2c0,
+ 	&s3c_device_rtc,
+	&s3c_device_nand,
+	&anubis_device_ide0,
+	&anubis_device_ide1,
+	&anubis_device_asix,
+	&anubis_device_sm501,
+};
+
+/* I2C devices. */
+
+static struct i2c_board_info anubis_i2c_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("tps65011", 0x48),
+		.irq	= IRQ_EINT20,
+	}
+};
+
+/* Audio setup */
+static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
+	.have_mic	= 1,
+	.have_lout	= 1,
+	.output_cdclk	= 1,
+	.use_mpllin	= 1,
+	.amp_gpio	= S3C2410_GPB(2),
+	.amp_gain[0]	= S3C2410_GPD(10),
+	.amp_gain[1]	= S3C2410_GPD(11),
+};
+
+static void __init anubis_map_io(void)
+{
+	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
+	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
+	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
+
+	/* check for the newer revision boards with large page nand */
+
+	if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) {
+		printk(KERN_INFO "ANUBIS-B detected (revision %d)\n",
+		       __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK);
+		anubis_nand_sets[0].partitions = anubis_default_nand_part_large;
+		anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
+	} else {
+		/* ensure that the GPIO is setup */
+		gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
+		gpio_free(S3C2410_GPA(0));
+	}
+}
+
+static void __init anubis_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	s3c24xx_timer_init();
+}
+
+static void __init anubis_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	s3c_nand_set_platdata(&anubis_nand_info);
+	simtec_audio_add(NULL, false, &anubis_audio);
+
+	platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
+
+	i2c_register_board_info(0, anubis_i2c_devs,
+				ARRAY_SIZE(anubis_i2c_devs));
+}
+
+
+MACHINE_START(ANUBIS, "Simtec-Anubis")
+	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2440,
+	.map_io		= anubis_map_io,
+	.init_machine	= anubis_init,
+	.init_irq	= s3c2440_init_irq,
+	.init_time	= anubis_init_time,
+MACHINE_END