Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 462 insertions, 0 deletions

diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
new file mode 100644
index 000000000..14c33ed05
--- /dev/null
+++ b/arch/arm/mach-sa1100/collie.c
@@ -0,0 +1,462 @@
+/*
+ * linux/arch/arm/mach-sa1100/collie.c
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * This file contains all Collie-specific tweaks.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ChangeLog:
+ *  2006 Pavel Machek <pavel@ucw.cz>
+ *  03-06-2004 John Lenz <lenz@cs.wisc.edu>
+ *  06-04-2002 Chris Larson <kergoth@digitalnemesis.net>
+ *  04-16-2001 Lineo Japan,Inc. ...
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/delay.h>
+#include <linux/platform_data/sa11x0-serial.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/ucb1x00.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/timer.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/power/gpio-charger.h>
+
+#include <video/sa1100fb.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <mach/collie.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+#include <linux/platform_data/irda-sa11x0.h>
+
+#include <asm/hardware/scoop.h>
+#include <asm/mach/sharpsl_param.h>
+#include <asm/hardware/locomo.h>
+#include <linux/platform_data/mfd-mcp-sa11x0.h>
+#include <mach/irqs.h>
+
+#include "generic.h"
+
+static struct resource collie_scoop_resources[] = {
+	[0] = DEFINE_RES_MEM(0x40800000, SZ_4K),
+};
+
+static struct scoop_config collie_scoop_setup = {
+	.io_dir 	= COLLIE_SCOOP_IO_DIR,
+	.io_out		= COLLIE_SCOOP_IO_OUT,
+	.gpio_base	= COLLIE_SCOOP_GPIO_BASE,
+};
+
+struct platform_device colliescoop_device = {
+	.name		= "sharp-scoop",
+	.id		= -1,
+	.dev		= {
+ 		.platform_data	= &collie_scoop_setup,
+	},
+	.num_resources	= ARRAY_SIZE(collie_scoop_resources),
+	.resource	= collie_scoop_resources,
+};
+
+static struct scoop_pcmcia_dev collie_pcmcia_scoop[] = {
+	{
+	.dev		= &colliescoop_device.dev,
+	.irq		= COLLIE_IRQ_GPIO_CF_IRQ,
+	.cd_irq		= COLLIE_IRQ_GPIO_CF_CD,
+	.cd_irq_str	= "PCMCIA0 CD",
+	},
+};
+
+static struct scoop_pcmcia_config collie_pcmcia_config = {
+	.devs		= &collie_pcmcia_scoop[0],
+	.num_devs	= 1,
+};
+
+static struct ucb1x00_plat_data collie_ucb1x00_data = {
+	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
+};
+
+static struct mcp_plat_data collie_mcp_data = {
+	.mccr0		= MCCR0_ADM | MCCR0_ExtClk,
+	.sclk_rate	= 9216000,
+	.codec_pdata	= &collie_ucb1x00_data,
+};
+
+/* Battery management GPIOs */
+static struct gpiod_lookup_table collie_battery_gpiod_table = {
+	/* the MCP codec mcp0 has the ucb1x00 as attached device */
+	.dev_id = "ucb1x00",
+	.table = {
+		/* This is found on the main GPIO on the SA1100 */
+		GPIO_LOOKUP("gpio", COLLIE_GPIO_CO,
+			    "main battery full", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio", COLLIE_GPIO_MAIN_BAT_LOW,
+			    "main battery low", GPIO_ACTIVE_HIGH),
+		/*
+		 * This is GPIO 0 on the Scoop expander, which is registered
+		 * from common/scoop.c with this gpio chip label.
+		 */
+		GPIO_LOOKUP("sharp-scoop", 0,
+			    "main charge on", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static int collie_ir_startup(struct device *dev)
+{
+	int rc = gpio_request(COLLIE_GPIO_IR_ON, "IrDA");
+	if (rc)
+		return rc;
+	rc = gpio_direction_output(COLLIE_GPIO_IR_ON, 1);
+
+	if (!rc)
+		return 0;
+
+	gpio_free(COLLIE_GPIO_IR_ON);
+	return rc;
+}
+
+static void collie_ir_shutdown(struct device *dev)
+{
+	gpio_free(COLLIE_GPIO_IR_ON);
+}
+
+static int collie_ir_set_power(struct device *dev, unsigned int state)
+{
+	gpio_set_value(COLLIE_GPIO_IR_ON, !state);
+	return 0;
+}
+
+static struct irda_platform_data collie_ir_data = {
+	.startup = collie_ir_startup,
+	.shutdown = collie_ir_shutdown,
+	.set_power = collie_ir_set_power,
+};
+
+/*
+ * Collie AC IN
+ */
+static struct gpiod_lookup_table collie_power_gpiod_table = {
+	.dev_id = "gpio-charger",
+	.table = {
+		GPIO_LOOKUP("gpio", COLLIE_GPIO_AC_IN,
+			    NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static char *collie_ac_supplied_to[] = {
+	"main-battery",
+	"backup-battery",
+};
+
+static struct gpio_charger_platform_data collie_power_data = {
+	.name			= "charger",
+	.type			= POWER_SUPPLY_TYPE_MAINS,
+	.supplied_to		= collie_ac_supplied_to,
+	.num_supplicants	= ARRAY_SIZE(collie_ac_supplied_to),
+};
+
+static struct platform_device collie_power_device = {
+	.name			= "gpio-charger",
+	.id			= -1,
+	.dev.platform_data	= &collie_power_data,
+};
+
+#ifdef CONFIG_SHARP_LOCOMO
+/*
+ * low-level UART features.
+ */
+struct platform_device collie_locomo_device;
+
+static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+	if (mctrl & TIOCM_RTS)
+		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0);
+	else
+		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1);
+
+	if (mctrl & TIOCM_DTR)
+		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0);
+	else
+		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1);
+}
+
+static u_int collie_uart_get_mctrl(struct uart_port *port)
+{
+	int ret = TIOCM_CD;
+	unsigned int r;
+
+	r = locomo_gpio_read_output(&collie_locomo_device.dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR);
+	if (r == -ENODEV)
+		return ret;
+	if (r & LOCOMO_GPIO_CTS)
+		ret |= TIOCM_CTS;
+	if (r & LOCOMO_GPIO_DSR)
+		ret |= TIOCM_DSR;
+
+	return ret;
+}
+
+static struct sa1100_port_fns collie_port_fns __initdata = {
+	.set_mctrl	= collie_uart_set_mctrl,
+	.get_mctrl	= collie_uart_get_mctrl,
+};
+
+static int collie_uart_probe(struct locomo_dev *dev)
+{
+	return 0;
+}
+
+static struct locomo_driver collie_uart_driver = {
+	.drv = {
+		.name = "collie_uart",
+	},
+	.devid	= LOCOMO_DEVID_UART,
+	.probe	= collie_uart_probe,
+};
+
+static int __init collie_uart_init(void)
+{
+	return locomo_driver_register(&collie_uart_driver);
+}
+device_initcall(collie_uart_init);
+
+#endif
+
+
+static struct resource locomo_resources[] = {
+	[0] = DEFINE_RES_MEM(0x40000000, SZ_8K),
+	[1] = DEFINE_RES_IRQ(IRQ_GPIO25),
+};
+
+static struct locomo_platform_data locomo_info = {
+	.irq_base	= IRQ_BOARD_START,
+};
+
+struct platform_device collie_locomo_device = {
+	.name		= "locomo",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &locomo_info,
+	},
+	.num_resources	= ARRAY_SIZE(locomo_resources),
+	.resource	= locomo_resources,
+};
+
+static struct gpio_keys_button collie_gpio_keys[] = {
+	{
+		.type	= EV_PWR,
+		.code	= KEY_RESERVED,
+		.gpio	= COLLIE_GPIO_ON_KEY,
+		.desc	= "On key",
+		.wakeup	= 1,
+		.active_low = 1,
+	},
+	{
+		.type	= EV_PWR,
+		.code	= KEY_WAKEUP,
+		.gpio	= COLLIE_GPIO_WAKEUP,
+		.desc	= "Sync",
+		.wakeup = 1,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_keys_platform_data collie_gpio_keys_data = {
+	.buttons	= collie_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(collie_gpio_keys),
+};
+
+static struct platform_device collie_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &collie_gpio_keys_data,
+	},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&collie_locomo_device,
+	&colliescoop_device,
+	&collie_power_device,
+	&collie_gpio_keys_device,
+};
+
+static struct mtd_partition collie_partitions[] = {
+	{
+		.name		= "bootloader",
+		.offset 	= 0,
+		.size		= 0x000C0000,
+		.mask_flags	= MTD_WRITEABLE
+	}, {
+		.name		= "kernel",
+		.offset 	= MTDPART_OFS_APPEND,
+		.size		= 0x00100000,
+	}, {
+		.name		= "rootfs",
+		.offset 	= MTDPART_OFS_APPEND,
+		.size		= 0x00e20000,
+	}, {
+		.name		= "bootblock",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 0x00020000,
+		.mask_flags	= MTD_WRITEABLE
+	}
+};
+
+static int collie_flash_init(void)
+{
+	int rc = gpio_request(COLLIE_GPIO_VPEN, "flash Vpp enable");
+	if (rc)
+		return rc;
+
+	rc = gpio_direction_output(COLLIE_GPIO_VPEN, 1);
+	if (rc)
+		gpio_free(COLLIE_GPIO_VPEN);
+
+	return rc;
+}
+
+static void collie_set_vpp(int vpp)
+{
+	gpio_set_value(COLLIE_GPIO_VPEN, vpp);
+}
+
+static void collie_flash_exit(void)
+{
+	gpio_free(COLLIE_GPIO_VPEN);
+}
+
+static struct flash_platform_data collie_flash_data = {
+	.map_name	= "cfi_probe",
+	.init		= collie_flash_init,
+	.set_vpp	= collie_set_vpp,
+	.exit		= collie_flash_exit,
+	.parts		= collie_partitions,
+	.nr_parts	= ARRAY_SIZE(collie_partitions),
+};
+
+static struct resource collie_flash_resources[] = {
+	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
+};
+
+static struct sa1100fb_mach_info collie_lcd_info = {
+	.pixclock	= 171521,	.bpp		= 16,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 5,		.vsync_len	= 1,
+	.left_margin	= 11,		.upper_margin	= 2,
+	.right_margin	= 30,		.lower_margin	= 0,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+
+#ifdef CONFIG_BACKLIGHT_LOCOMO
+	.lcd_power	= locomolcd_power
+#endif
+};
+
+static void __init collie_init(void)
+{
+	int ret = 0;
+
+	/* cpu initialize */
+	GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK |
+		GPIO_MCP_CLK | GPIO_32_768kHz;
+
+	GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
+		GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
+		GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
+		_COLLIE_GPIO_UCB1x00_RESET | _COLLIE_GPIO_nMIC_ON |
+		_COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
+
+	PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
+		PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
+		PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+
+	PWER = 0;
+
+	PGSR = _COLLIE_GPIO_nREMOCON_ON;
+
+	PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
+
+	PCFR = PCFR_OPDE;
+
+	GPSR |= _COLLIE_GPIO_UCB1x00_RESET;
+
+	sa11x0_ppc_configure_mcp();
+
+
+	platform_scoop_config = &collie_pcmcia_config;
+
+	gpiod_add_lookup_table(&collie_power_gpiod_table);
+	gpiod_add_lookup_table(&collie_battery_gpiod_table);
+
+	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+	if (ret) {
+		printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
+	}
+
+	sa11x0_register_lcd(&collie_lcd_info);
+	sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
+			    ARRAY_SIZE(collie_flash_resources));
+	sa11x0_register_mcp(&collie_mcp_data);
+	sa11x0_register_irda(&collie_ir_data);
+
+	sharpsl_save_param();
+}
+
+static struct map_desc collie_io_desc[] __initdata = {
+	{	/* 32M main flash (cs0) */
+		.virtual	= 0xe8000000,
+		.pfn		= __phys_to_pfn(0x00000000),
+		.length		= 0x02000000,
+		.type		= MT_DEVICE
+	}, {	/* 32M boot flash (cs1) */
+		.virtual	= 0xea000000,
+		.pfn		= __phys_to_pfn(0x08000000),
+		.length		= 0x02000000,
+		.type		= MT_DEVICE
+	}
+};
+
+static void __init collie_map_io(void)
+{
+	sa1100_map_io();
+	iotable_init(collie_io_desc, ARRAY_SIZE(collie_io_desc));
+
+#ifdef CONFIG_SHARP_LOCOMO
+	sa1100_register_uart_fns(&collie_port_fns);
+#endif
+	sa1100_register_uart(0, 3);
+	sa1100_register_uart(1, 1);
+}
+
+MACHINE_START(COLLIE, "Sharp-Collie")
+	.map_io		= collie_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
+	.init_irq	= sa1100_init_irq,
+	.init_time	= sa1100_timer_init,
+	.init_machine	= collie_init,
+	.init_late	= sa11x0_init_late,
+	.restart	= sa11x0_restart,
+MACHINE_END