Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 396 insertions, 0 deletions

diff --git a/arch/m68k/ifpsp060/os.S b/arch/m68k/ifpsp060/os.S
new file mode 100644
index 000000000..89e2ec224
--- /dev/null
+++ b/arch/m68k/ifpsp060/os.S
@@ -0,0 +1,396 @@
+|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+|MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
+|M68000 Hi-Performance Microprocessor Division
+|M68060 Software Package
+|Production Release P1.00 -- October 10, 1994
+|
+|M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.
+|
+|THE SOFTWARE is provided on an "AS IS" basis and without warranty.
+|To the maximum extent permitted by applicable law,
+|MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
+|INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+|and any warranty against infringement with regard to the SOFTWARE
+|(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
+|
+|To the maximum extent permitted by applicable law,
+|IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
+|(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
+|BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
+|ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
+|Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
+|
+|You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
+|so long as this entire notice is retained without alteration in any modified and/or
+|redistributed versions, and that such modified versions are clearly identified as such.
+|No licenses are granted by implication, estoppel or otherwise under any patents
+|or trademarks of Motorola, Inc.
+|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+| os.s
+|
+| This file contains:
+|	- example "Call-Out"s required by both the ISP and FPSP.
+|
+
+#include <linux/linkage.h>
+
+|################################
+| EXAMPLE CALL-OUTS		#
+|				#
+| _060_dmem_write()		#
+| _060_dmem_read()		#
+| _060_imem_read()		#
+| _060_dmem_read_byte()		#
+| _060_dmem_read_word()		#
+| _060_dmem_read_long()		#
+| _060_imem_read_word()		#
+| _060_imem_read_long()		#
+| _060_dmem_write_byte()	#
+| _060_dmem_write_word()	#
+| _060_dmem_write_long()	#
+|				#
+| _060_real_trace()		#
+| _060_real_access()		#
+|################################
+
+|
+| Each IO routine checks to see if the memory write/read is to/from user
+| or supervisor application space. The examples below use simple "move"
+| instructions for supervisor mode applications and call _copyin()/_copyout()
+| for user mode applications.
+| When installing the 060SP, the _copyin()/_copyout() equivalents for a
+| given operating system should be substituted.
+|
+| The addresses within the 060SP are guaranteed to be on the stack.
+| The result is that Unix processes are allowed to sleep as a consequence
+| of a page fault during a _copyout.
+|
+| Linux/68k: The _060_[id]mem_{read,write}_{byte,word,long} functions
+| (i.e. all the known length <= 4) are implemented by single moves
+| statements instead of (more expensive) copy{in,out} calls, if
+| working in user space
+
+|
+| _060_dmem_write():
+|
+| Writes to data memory while in supervisor mode.
+|
+| INPUTS:
+|	a0 - supervisor source address
+|	a1 - user destination address
+|	d0 - number of bytes to write
+|	0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
+| OUTPUTS:
+|	d1 - 0 = success, !0 = failure
+|
+	.global		_060_dmem_write
+_060_dmem_write:
+	subq.l		#1,%d0
+	btst		#0x5,0x4(%a6)		| check for supervisor state
+	beqs		user_write
+super_write:
+	move.b		(%a0)+,(%a1)+		| copy 1 byte
+	dbra		%d0,super_write		| quit if --ctr < 0
+	clr.l		%d1			| return success
+	rts
+user_write:
+	move.b		(%a0)+,%d1		| copy 1 byte
+copyoutae:
+	movs.b		%d1,(%a1)+
+	dbra		%d0,user_write		| quit if --ctr < 0
+	clr.l		%d1			| return success
+	rts
+
+|
+| _060_imem_read(), _060_dmem_read():
+|
+| Reads from data/instruction memory while in supervisor mode.
+|
+| INPUTS:
+|	a0 - user source address
+|	a1 - supervisor destination address
+|	d0 - number of bytes to read
+|	0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
+| OUTPUTS:
+|	d1 - 0 = success, !0 = failure
+|
+	.global		_060_imem_read
+	.global		_060_dmem_read
+_060_imem_read:
+_060_dmem_read:
+	subq.l		#1,%d0
+	btst		#0x5,0x4(%a6)		| check for supervisor state
+	beqs		user_read
+super_read:
+	move.b		(%a0)+,(%a1)+		| copy 1 byte
+	dbra		%d0,super_read		| quit if --ctr < 0
+	clr.l		%d1			| return success
+	rts
+user_read:
+copyinae:
+	movs.b		(%a0)+,%d1
+	move.b		%d1,(%a1)+		| copy 1 byte
+	dbra		%d0,user_read		| quit if --ctr < 0
+	clr.l		%d1			| return success
+	rts
+
+|
+| _060_dmem_read_byte():
+|
+| Read a data byte from user memory.
+|
+| INPUTS:
+|	a0 - user source address
+|	0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
+| OUTPUTS:
+|	d0 - data byte in d0
+|	d1 - 0 = success, !0 = failure
+|
+	.global		_060_dmem_read_byte
+_060_dmem_read_byte:
+	clr.l		%d0			| clear whole longword
+	clr.l		%d1			| assume success
+	btst		#0x5,0x4(%a6)		| check for supervisor state
+	bnes		dmrbs			| supervisor
+dmrbuae:movs.b		(%a0),%d0		| fetch user byte
+	rts
+dmrbs:	move.b		(%a0),%d0		| fetch super byte
+	rts
+
+|
+| _060_dmem_read_word():
+|
+| Read a data word from user memory.
+|
+| INPUTS:
+|	a0 - user source address
+|	0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
+| OUTPUTS:
+|	d0 - data word in d0
+|	d1 - 0 = success, !0 = failure
+|
+| _060_imem_read_word():
+|
+| Read an instruction word from user memory.
+|
+| INPUTS:
+|	a0 - user source address
+|	0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
+| OUTPUTS:
+|	d0 - instruction word in d0
+|	d1 - 0 = success, !0 = failure
+|
+	.global		_060_dmem_read_word
+	.global		_060_imem_read_word
+_060_dmem_read_word:
+_060_imem_read_word:
+	clr.l		%d1			| assume success
+	clr.l		%d0			| clear whole longword
+	btst		#0x5,0x4(%a6)		| check for supervisor state
+	bnes		dmrws			| supervisor
+dmrwuae:movs.w		(%a0), %d0		| fetch user word
+	rts
+dmrws:	move.w		(%a0), %d0		| fetch super word
+	rts
+
+|
+| _060_dmem_read_long():
+|
+
+|
+| INPUTS:
+|	a0 - user source address
+|	0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
+| OUTPUTS:
+|	d0 - data longword in d0
+|	d1 - 0 = success, !0 = failure
+|
+| _060_imem_read_long():
+|
+| Read an instruction longword from user memory.
+|
+| INPUTS:
+|	a0 - user source address
+|	0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
+| OUTPUTS:
+|	d0 - instruction longword in d0
+|	d1 - 0 = success, !0 = failure
+|
+	.global		_060_dmem_read_long
+	.global		_060_imem_read_long
+_060_dmem_read_long:
+_060_imem_read_long:
+	clr.l		%d1			| assume success
+	btst		#0x5,0x4(%a6)		| check for supervisor state
+	bnes		dmrls			| supervisor
+dmrluae:movs.l		(%a0),%d0		| fetch user longword
+	rts
+dmrls:	move.l		(%a0),%d0		| fetch super longword
+	rts
+
+|
+| _060_dmem_write_byte():
+|
+| Write a data byte to user memory.
+|
+| INPUTS:
+|	a0 - user destination address
+|	d0 - data byte in d0
+|	0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
+| OUTPUTS:
+|	d1 - 0 = success, !0 = failure
+|
+	.global		_060_dmem_write_byte
+_060_dmem_write_byte:
+	clr.l		%d1			| assume success
+	btst		#0x5,0x4(%a6)		| check for supervisor state
+	bnes		dmwbs			| supervisor
+dmwbuae:movs.b		%d0,(%a0)		| store user byte
+	rts
+dmwbs:	move.b		%d0,(%a0)		| store super byte
+	rts
+
+|
+| _060_dmem_write_word():
+|
+| Write a data word to user memory.
+|
+| INPUTS:
+|	a0 - user destination address
+|	d0 - data word in d0
+|	0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
+| OUTPUTS:
+|	d1 - 0 = success, !0 = failure
+|
+	.global		_060_dmem_write_word
+_060_dmem_write_word:
+	clr.l		%d1			| assume success
+	btst		#0x5,0x4(%a6)		| check for supervisor state
+	bnes		dmwws			| supervisor
+dmwwu:
+dmwwuae:movs.w		%d0,(%a0)		| store user word
+	bras		dmwwr
+dmwws:	move.w		%d0,(%a0)		| store super word
+dmwwr:	clr.l		%d1			| return success
+	rts
+
+|
+| _060_dmem_write_long():
+|
+| Write a data longword to user memory.
+|
+| INPUTS:
+|	a0 - user destination address
+|	d0 - data longword in d0
+|	0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
+| OUTPUTS:
+|	d1 - 0 = success, !0 = failure
+|
+	.global		_060_dmem_write_long
+_060_dmem_write_long:
+	clr.l		%d1			| assume success
+	btst		#0x5,0x4(%a6)		| check for supervisor state
+	bnes		dmwls			| supervisor
+dmwluae:movs.l		%d0,(%a0)		| store user longword
+	rts
+dmwls:	move.l		%d0,(%a0)		| store super longword
+	rts
+
+
+#if 0
+|###############################################
+
+|
+| Use these routines if your kernel doesn't have _copyout/_copyin equivalents.
+| Assumes that D0/D1/A0/A1 are scratch registers. The _copyin/_copyout
+| below assume that the SFC/DFC have been set previously.
+|
+| Linux/68k: These are basically non-inlined versions of
+| memcpy_{to,from}fs, but without long-transfer optimization
+| Note: Assumed that SFC/DFC are pointing correctly to user data
+| space... Should be right, or are there any exceptions?
+
+|
+| int _copyout(supervisor_addr, user_addr, nbytes)
+|
+	.global		_copyout
+_copyout:
+	move.l		4(%sp),%a0		| source
+	move.l		8(%sp),%a1		| destination
+	move.l		12(%sp),%d0		| count
+	subq.l		#1,%d0
+moreout:
+	move.b		(%a0)+,%d1		| fetch supervisor byte
+copyoutae:
+	movs.b		%d1,(%a1)+		| store user byte
+	dbra		%d0,moreout		| are we through yet?
+	moveq		#0,%d0			| return success
+	rts
+
+|
+| int _copyin(user_addr, supervisor_addr, nbytes)
+|
+	.global		_copyin
+_copyin:
+	move.l		4(%sp),%a0		| source
+	move.l		8(%sp),%a1		| destination
+	move.l		12(%sp),%d0		| count
+    subq.l      #1,%d0
+morein:
+copyinae:
+	movs.b		(%a0)+,%d1		| fetch user byte
+	move.b		%d1,(%a1)+		| write supervisor byte
+	dbra		%d0,morein		| are we through yet?
+	moveq		#0,%d0			| return success
+	rts
+#endif
+
+|###########################################################################
+
+|
+| _060_real_trace():
+|
+| This is the exit point for the 060FPSP when an instruction is being traced
+| and there are no other higher priority exceptions pending for this instruction
+| or they have already been processed.
+|
+| The sample code below simply executes an "rte".
+|
+	.global		_060_real_trace
+_060_real_trace:
+	bral	trap
+
+|
+| _060_real_access():
+|
+| This is the exit point for the 060FPSP when an access error exception
+| is encountered. The routine below should point to the operating system
+| handler for access error exceptions. The exception stack frame is an
+| 8-word access error frame.
+|
+| The sample routine below simply executes an "rte" instruction which
+| is most likely the incorrect thing to do and could put the system
+| into an infinite loop.
+|
+	.global		_060_real_access
+_060_real_access:
+	bral	buserr
+
+
+
+| Execption handling for movs access to illegal memory
+	.section .fixup,"ax"
+	.even
+1:	moveq		#-1,%d1
+	rts
+.section __ex_table,"a"
+	.align 4
+	.long	dmrbuae,1b
+	.long	dmrwuae,1b
+	.long	dmrluae,1b
+	.long	dmwbuae,1b
+	.long	dmwwuae,1b
+	.long	dmwluae,1b
+	.long	copyoutae,1b
+	.long	copyinae,1b
+	.text