Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 672 insertions, 0 deletions

diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
new file mode 100644
index 000000000..95fd7f948
--- /dev/null
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -0,0 +1,672 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_POWERPC_HVCALL_H
+#define _ASM_POWERPC_HVCALL_H
+#ifdef __KERNEL__
+
+#define HVSC			.long 0x44000022
+
+#define H_SUCCESS	0
+#define H_BUSY		1	/* Hardware busy -- retry later */
+#define H_CLOSED	2	/* Resource closed */
+#define H_NOT_AVAILABLE 3
+#define H_CONSTRAINED	4	/* Resource request constrained to max allowed */
+#define H_PARTIAL       5
+#define H_IN_PROGRESS	14	/* Kind of like busy */
+#define H_PAGE_REGISTERED 15
+#define H_PARTIAL_STORE   16
+#define H_PENDING	17	/* returned from H_POLL_PENDING */
+#define H_CONTINUE	18	/* Returned from H_Join on success */
+#define H_LONG_BUSY_START_RANGE		9900  /* Start of long busy range */
+#define H_LONG_BUSY_ORDER_1_MSEC	9900  /* Long busy, hint that 1msec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_MSEC	9901  /* Long busy, hint that 10msec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_MSEC 	9902  /* Long busy, hint that 100msec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_1_SEC		9903  /* Long busy, hint that 1sec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_SEC	9904  /* Long busy, hint that 10sec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_SEC	9905  /* Long busy, hint that 100sec \
+						 is a good time to retry */
+#define H_LONG_BUSY_END_RANGE		9905  /* End of long busy range */
+
+/* Internal value used in book3s_hv kvm support; not returned to guests */
+#define H_TOO_HARD	9999
+
+#define H_HARDWARE	-1	/* Hardware error */
+#define H_FUNCTION	-2	/* Function not supported */
+#define H_PRIVILEGE	-3	/* Caller not privileged */
+#define H_PARAMETER	-4	/* Parameter invalid, out-of-range or conflicting */
+#define H_BAD_MODE	-5	/* Illegal msr value */
+#define H_PTEG_FULL	-6	/* PTEG is full */
+#define H_NOT_FOUND	-7	/* PTE was not found" */
+#define H_RESERVED_DABR	-8	/* DABR address is reserved by the hypervisor on this processor" */
+#define H_NO_MEM	-9
+#define H_AUTHORITY	-10
+#define H_PERMISSION	-11
+#define H_DROPPED	-12
+#define H_SOURCE_PARM	-13
+#define H_DEST_PARM	-14
+#define H_REMOTE_PARM	-15
+#define H_RESOURCE	-16
+#define H_ADAPTER_PARM  -17
+#define H_RH_PARM       -18
+#define H_RCQ_PARM      -19
+#define H_SCQ_PARM      -20
+#define H_EQ_PARM       -21
+#define H_RT_PARM       -22
+#define H_ST_PARM       -23
+#define H_SIGT_PARM     -24
+#define H_TOKEN_PARM    -25
+#define H_MLENGTH_PARM  -27
+#define H_MEM_PARM      -28
+#define H_MEM_ACCESS_PARM -29
+#define H_ATTR_PARM     -30
+#define H_PORT_PARM     -31
+#define H_MCG_PARM      -32
+#define H_VL_PARM       -33
+#define H_TSIZE_PARM    -34
+#define H_TRACE_PARM    -35
+
+#define H_MASK_PARM     -37
+#define H_MCG_FULL      -38
+#define H_ALIAS_EXIST   -39
+#define H_P_COUNTER     -40
+#define H_TABLE_FULL    -41
+#define H_ALT_TABLE     -42
+#define H_MR_CONDITION  -43
+#define H_NOT_ENOUGH_RESOURCES -44
+#define H_R_STATE       -45
+#define H_RESCINDED     -46
+#define H_ABORTED	-54
+#define H_P2		-55
+#define H_P3		-56
+#define H_P4		-57
+#define H_P5		-58
+#define H_P6		-59
+#define H_P7		-60
+#define H_P8		-61
+#define H_P9		-62
+#define H_NOOP		-63
+#define H_TOO_BIG	-64
+#define H_UNSUPPORTED	-67
+#define H_OVERLAP	-68
+#define H_INTERRUPT	-69
+#define H_BAD_DATA	-70
+#define H_NOT_ACTIVE	-71
+#define H_SG_LIST	-72
+#define H_OP_MODE	-73
+#define H_COP_HW	-74
+#define H_STATE		-75
+#define H_IN_USE	-77
+#define H_UNSUPPORTED_FLAG_START	-256
+#define H_UNSUPPORTED_FLAG_END		-511
+#define H_MULTI_THREADS_ACTIVE	-9005
+#define H_OUTSTANDING_COP_OPS	-9006
+
+
+/* Long Busy is a condition that can be returned by the firmware
+ * when a call cannot be completed now, but the identical call
+ * should be retried later.  This prevents calls blocking in the
+ * firmware for long periods of time.  Annoyingly the firmware can return
+ * a range of return codes, hinting at how long we should wait before
+ * retrying.  If you don't care for the hint, the macro below is a good
+ * way to check for the long_busy return codes
+ */
+#define H_IS_LONG_BUSY(x)  ((x >= H_LONG_BUSY_START_RANGE) \
+			     && (x <= H_LONG_BUSY_END_RANGE))
+
+/* Flags */
+#define H_LARGE_PAGE		(1UL<<(63-16))
+#define H_EXACT			(1UL<<(63-24))	/* Use exact PTE or return H_PTEG_FULL */
+#define H_R_XLATE		(1UL<<(63-25))	/* include a valid logical page num in the pte if the valid bit is set */
+#define H_READ_4		(1UL<<(63-26))	/* Return 4 PTEs */
+#define H_PAGE_STATE_CHANGE	(1UL<<(63-28))
+#define H_PAGE_UNUSED		((1UL<<(63-29)) | (1UL<<(63-30)))
+#define H_PAGE_SET_UNUSED	(H_PAGE_STATE_CHANGE | H_PAGE_UNUSED)
+#define H_PAGE_SET_LOANED	(H_PAGE_SET_UNUSED | (1UL<<(63-31)))
+#define H_PAGE_SET_ACTIVE	H_PAGE_STATE_CHANGE
+#define H_AVPN			(1UL<<(63-32))	/* An avpn is provided as a sanity test */
+#define H_ANDCOND		(1UL<<(63-33))
+#define H_LOCAL			(1UL<<(63-35))
+#define H_ICACHE_INVALIDATE	(1UL<<(63-40))	/* icbi, etc.  (ignored for IO pages) */
+#define H_ICACHE_SYNCHRONIZE	(1UL<<(63-41))	/* dcbst, icbi, etc (ignored for IO pages */
+#define H_COALESCE_CAND	(1UL<<(63-42))	/* page is a good candidate for coalescing */
+#define H_ZERO_PAGE		(1UL<<(63-48))	/* zero the page before mapping (ignored for IO pages) */
+#define H_COPY_PAGE		(1UL<<(63-49))
+#define H_N			(1UL<<(63-61))
+#define H_PP1			(1UL<<(63-62))
+#define H_PP2			(1UL<<(63-63))
+
+/* Flags for H_REGISTER_VPA subfunction field */
+#define H_VPA_FUNC_SHIFT	(63-18)	/* Bit posn of subfunction code */
+#define H_VPA_FUNC_MASK		7UL
+#define H_VPA_REG_VPA		1UL	/* Register Virtual Processor Area */
+#define H_VPA_REG_DTL		2UL	/* Register Dispatch Trace Log */
+#define H_VPA_REG_SLB		3UL	/* Register SLB shadow buffer */
+#define H_VPA_DEREG_VPA		5UL	/* Deregister Virtual Processor Area */
+#define H_VPA_DEREG_DTL		6UL	/* Deregister Dispatch Trace Log */
+#define H_VPA_DEREG_SLB		7UL	/* Deregister SLB shadow buffer */
+
+/* VASI States */
+#define H_VASI_INVALID          0
+#define H_VASI_ENABLED          1
+#define H_VASI_ABORTED          2
+#define H_VASI_SUSPENDING       3
+#define H_VASI_SUSPENDED        4
+#define H_VASI_RESUMED          5
+#define H_VASI_COMPLETED        6
+
+/* VASI signal codes. Only the Cancel code is valid for H_VASI_SIGNAL. */
+#define H_VASI_SIGNAL_CANCEL    1
+#define H_VASI_SIGNAL_ABORT     2
+#define H_VASI_SIGNAL_SUSPEND   3
+#define H_VASI_SIGNAL_COMPLETE  4
+#define H_VASI_SIGNAL_ENABLE    5
+#define H_VASI_SIGNAL_FAILOVER  6
+
+/* Each control block has to be on a 4K boundary */
+#define H_CB_ALIGNMENT          4096
+
+/* pSeries hypervisor opcodes */
+#define H_REMOVE		0x04
+#define H_ENTER			0x08
+#define H_READ			0x0c
+#define H_CLEAR_MOD		0x10
+#define H_CLEAR_REF		0x14
+#define H_PROTECT		0x18
+#define H_GET_TCE		0x1c
+#define H_PUT_TCE		0x20
+#define H_SET_SPRG0		0x24
+#define H_SET_DABR		0x28
+#define H_PAGE_INIT		0x2c
+#define H_SET_ASR		0x30
+#define H_ASR_ON		0x34
+#define H_ASR_OFF		0x38
+#define H_LOGICAL_CI_LOAD	0x3c
+#define H_LOGICAL_CI_STORE	0x40
+#define H_LOGICAL_CACHE_LOAD	0x44
+#define H_LOGICAL_CACHE_STORE	0x48
+#define H_LOGICAL_ICBI		0x4c
+#define H_LOGICAL_DCBF		0x50
+#define H_GET_TERM_CHAR		0x54
+#define H_PUT_TERM_CHAR		0x58
+#define H_REAL_TO_LOGICAL	0x5c
+#define H_HYPERVISOR_DATA	0x60
+#define H_EOI			0x64
+#define H_CPPR			0x68
+#define H_IPI			0x6c
+#define H_IPOLL			0x70
+#define H_XIRR			0x74
+#define H_PERFMON		0x7c
+#define H_MIGRATE_DMA		0x78
+#define H_REGISTER_VPA		0xDC
+#define H_CEDE			0xE0
+#define H_CONFER		0xE4
+#define H_PROD			0xE8
+#define H_GET_PPP		0xEC
+#define H_SET_PPP		0xF0
+#define H_PURR			0xF4
+#define H_PIC			0xF8
+#define H_REG_CRQ		0xFC
+#define H_FREE_CRQ		0x100
+#define H_VIO_SIGNAL		0x104
+#define H_SEND_CRQ		0x108
+#define H_COPY_RDMA		0x110
+#define H_REGISTER_LOGICAL_LAN	0x114
+#define H_FREE_LOGICAL_LAN	0x118
+#define H_ADD_LOGICAL_LAN_BUFFER 0x11C
+#define H_SEND_LOGICAL_LAN	0x120
+#define H_BULK_REMOVE		0x124
+#define H_MULTICAST_CTRL	0x130
+#define H_SET_XDABR		0x134
+#define H_STUFF_TCE		0x138
+#define H_PUT_TCE_INDIRECT	0x13C
+#define H_CHANGE_LOGICAL_LAN_MAC 0x14C
+#define H_VTERM_PARTNER_INFO	0x150
+#define H_REGISTER_VTERM	0x154
+#define H_FREE_VTERM		0x158
+#define H_RESET_EVENTS          0x15C
+#define H_ALLOC_RESOURCE        0x160
+#define H_FREE_RESOURCE         0x164
+#define H_MODIFY_QP             0x168
+#define H_QUERY_QP              0x16C
+#define H_REREGISTER_PMR        0x170
+#define H_REGISTER_SMR          0x174
+#define H_QUERY_MR              0x178
+#define H_QUERY_MW              0x17C
+#define H_QUERY_HCA             0x180
+#define H_QUERY_PORT            0x184
+#define H_MODIFY_PORT           0x188
+#define H_DEFINE_AQP1           0x18C
+#define H_GET_TRACE_BUFFER      0x190
+#define H_DEFINE_AQP0           0x194
+#define H_RESIZE_MR             0x198
+#define H_ATTACH_MCQP           0x19C
+#define H_DETACH_MCQP           0x1A0
+#define H_CREATE_RPT            0x1A4
+#define H_REMOVE_RPT            0x1A8
+#define H_REGISTER_RPAGES       0x1AC
+#define H_DISABLE_AND_GET       0x1B0
+#define H_ERROR_DATA            0x1B4
+#define H_GET_HCA_INFO          0x1B8
+#define H_GET_PERF_COUNT        0x1BC
+#define H_MANAGE_TRACE          0x1C0
+#define H_GET_CPU_CHARACTERISTICS 0x1C8
+#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
+#define H_QUERY_INT_STATE       0x1E4
+#define H_POLL_PENDING		0x1D8
+#define H_ILLAN_ATTRIBUTES	0x244
+#define H_MODIFY_HEA_QP		0x250
+#define H_QUERY_HEA_QP		0x254
+#define H_QUERY_HEA		0x258
+#define H_QUERY_HEA_PORT	0x25C
+#define H_MODIFY_HEA_PORT	0x260
+#define H_REG_BCMC		0x264
+#define H_DEREG_BCMC		0x268
+#define H_REGISTER_HEA_RPAGES	0x26C
+#define H_DISABLE_AND_GET_HEA	0x270
+#define H_GET_HEA_INFO		0x274
+#define H_ALLOC_HEA_RESOURCE	0x278
+#define H_ADD_CONN		0x284
+#define H_DEL_CONN		0x288
+#define H_JOIN			0x298
+#define H_VASI_SIGNAL           0x2A0
+#define H_VASI_STATE            0x2A4
+#define H_VIOCTL		0x2A8
+#define H_ENABLE_CRQ		0x2B0
+#define H_GET_EM_PARMS		0x2B8
+#define H_SET_MPP		0x2D0
+#define H_GET_MPP		0x2D4
+#define H_REG_SUB_CRQ		0x2DC
+#define H_HOME_NODE_ASSOCIATIVITY 0x2EC
+#define H_FREE_SUB_CRQ		0x2E0
+#define H_SEND_SUB_CRQ		0x2E4
+#define H_SEND_SUB_CRQ_INDIRECT	0x2E8
+#define H_BEST_ENERGY		0x2F4
+#define H_XIRR_X		0x2FC
+#define H_RANDOM		0x300
+#define H_COP			0x304
+#define H_GET_MPP_X		0x314
+#define H_SET_MODE		0x31C
+#define H_BLOCK_REMOVE		0x328
+#define H_CLEAR_HPT		0x358
+#define H_REQUEST_VMC		0x360
+#define H_RESIZE_HPT_PREPARE	0x36C
+#define H_RESIZE_HPT_COMMIT	0x370
+#define H_REGISTER_PROC_TBL	0x37C
+#define H_SIGNAL_SYS_RESET	0x380
+#define H_ALLOCATE_VAS_WINDOW	0x388
+#define H_MODIFY_VAS_WINDOW	0x38C
+#define H_DEALLOCATE_VAS_WINDOW	0x390
+#define H_QUERY_VAS_WINDOW	0x394
+#define H_QUERY_VAS_CAPABILITIES	0x398
+#define H_QUERY_NX_CAPABILITIES	0x39C
+#define H_GET_NX_FAULT		0x3A0
+#define H_INT_GET_SOURCE_INFO   0x3A8
+#define H_INT_SET_SOURCE_CONFIG 0x3AC
+#define H_INT_GET_SOURCE_CONFIG 0x3B0
+#define H_INT_GET_QUEUE_INFO    0x3B4
+#define H_INT_SET_QUEUE_CONFIG  0x3B8
+#define H_INT_GET_QUEUE_CONFIG  0x3BC
+#define H_INT_SET_OS_REPORTING_LINE 0x3C0
+#define H_INT_GET_OS_REPORTING_LINE 0x3C4
+#define H_INT_ESB               0x3C8
+#define H_INT_SYNC              0x3CC
+#define H_INT_RESET             0x3D0
+#define H_SCM_READ_METADATA     0x3E4
+#define H_SCM_WRITE_METADATA    0x3E8
+#define H_SCM_BIND_MEM          0x3EC
+#define H_SCM_UNBIND_MEM        0x3F0
+#define H_SCM_QUERY_BLOCK_MEM_BINDING 0x3F4
+#define H_SCM_QUERY_LOGICAL_MEM_BINDING 0x3F8
+#define H_SCM_UNBIND_ALL        0x3FC
+#define H_SCM_HEALTH            0x400
+#define H_SCM_PERFORMANCE_STATS 0x418
+#define H_PKS_GET_CONFIG	0x41C
+#define H_PKS_SET_PASSWORD	0x420
+#define H_PKS_GEN_PASSWORD	0x424
+#define H_PKS_WRITE_OBJECT	0x42C
+#define H_PKS_GEN_KEY		0x430
+#define H_PKS_READ_OBJECT	0x434
+#define H_PKS_REMOVE_OBJECT	0x438
+#define H_PKS_CONFIRM_OBJECT_FLUSHED	0x43C
+#define H_RPT_INVALIDATE	0x448
+#define H_SCM_FLUSH		0x44C
+#define H_GET_ENERGY_SCALE_INFO	0x450
+#define H_WATCHDOG		0x45C
+#define MAX_HCALL_OPCODE	H_WATCHDOG
+
+/* Scope args for H_SCM_UNBIND_ALL */
+#define H_UNBIND_SCOPE_ALL (0x1)
+#define H_UNBIND_SCOPE_DRC (0x2)
+
+/* H_VIOCTL functions */
+#define H_GET_VIOA_DUMP_SIZE	0x01
+#define H_GET_VIOA_DUMP		0x02
+#define H_GET_ILLAN_NUM_VLAN_IDS 0x03
+#define H_GET_ILLAN_VLAN_ID_LIST 0x04
+#define H_GET_ILLAN_SWITCH_ID	0x05
+#define H_DISABLE_MIGRATION	0x06
+#define H_ENABLE_MIGRATION	0x07
+#define H_GET_PARTNER_INFO	0x08
+#define H_GET_PARTNER_WWPN_LIST	0x09
+#define H_DISABLE_ALL_VIO_INTS	0x0A
+#define H_DISABLE_VIO_INTERRUPT	0x0B
+#define H_ENABLE_VIO_INTERRUPT	0x0C
+#define H_GET_SESSION_TOKEN	0x19
+#define H_SESSION_ERR_DETECTED	0x1A
+
+
+/* Platform specific hcalls, used by KVM */
+#define H_RTAS			0xf000
+
+/*
+ * Platform specific hcalls, used by QEMU/SLOF. These are ignored by
+ * KVM and only kept here so we can identify them during tracing.
+ */
+#define H_LOGICAL_MEMOP  0xF001
+#define H_CAS            0XF002
+#define H_UPDATE_DT      0XF003
+
+/* "Platform specific hcalls", provided by PHYP */
+#define H_GET_24X7_CATALOG_PAGE	0xF078
+#define H_GET_24X7_DATA		0xF07C
+#define H_GET_PERF_COUNTER_INFO	0xF080
+
+/* Platform-specific hcalls used for nested HV KVM */
+#define H_SET_PARTITION_TABLE	0xF800
+#define H_ENTER_NESTED		0xF804
+#define H_TLB_INVALIDATE	0xF808
+#define H_COPY_TOFROM_GUEST	0xF80C
+
+/* Flags for H_SVM_PAGE_IN */
+#define H_PAGE_IN_SHARED        0x1
+
+/* Platform-specific hcalls used by the Ultravisor */
+#define H_SVM_PAGE_IN		0xEF00
+#define H_SVM_PAGE_OUT		0xEF04
+#define H_SVM_INIT_START	0xEF08
+#define H_SVM_INIT_DONE		0xEF0C
+#define H_SVM_INIT_ABORT	0xEF14
+
+/* Values for 2nd argument to H_SET_MODE */
+#define H_SET_MODE_RESOURCE_SET_CIABR		1
+#define H_SET_MODE_RESOURCE_SET_DAWR0		2
+#define H_SET_MODE_RESOURCE_ADDR_TRANS_MODE	3
+#define H_SET_MODE_RESOURCE_LE			4
+#define H_SET_MODE_RESOURCE_SET_DAWR1		5
+
+/* Values for argument to H_SIGNAL_SYS_RESET */
+#define H_SIGNAL_SYS_RESET_ALL			-1
+#define H_SIGNAL_SYS_RESET_ALL_OTHERS		-2
+/* >= 0 values are CPU number */
+
+/* H_GET_CPU_CHARACTERISTICS return values */
+#define H_CPU_CHAR_SPEC_BAR_ORI31	(1ull << 63) // IBM bit 0
+#define H_CPU_CHAR_BCCTRL_SERIALISED	(1ull << 62) // IBM bit 1
+#define H_CPU_CHAR_L1D_FLUSH_ORI30	(1ull << 61) // IBM bit 2
+#define H_CPU_CHAR_L1D_FLUSH_TRIG2	(1ull << 60) // IBM bit 3
+#define H_CPU_CHAR_L1D_THREAD_PRIV	(1ull << 59) // IBM bit 4
+#define H_CPU_CHAR_BRANCH_HINTS_HONORED	(1ull << 58) // IBM bit 5
+#define H_CPU_CHAR_THREAD_RECONFIG_CTRL	(1ull << 57) // IBM bit 6
+#define H_CPU_CHAR_COUNT_CACHE_DISABLED	(1ull << 56) // IBM bit 7
+#define H_CPU_CHAR_BCCTR_FLUSH_ASSIST	(1ull << 54) // IBM bit 9
+#define H_CPU_CHAR_BCCTR_LINK_FLUSH_ASSIST (1ull << 52) // IBM bit 11
+
+#define H_CPU_BEHAV_FAVOUR_SECURITY	(1ull << 63) // IBM bit 0
+#define H_CPU_BEHAV_L1D_FLUSH_PR	(1ull << 62) // IBM bit 1
+#define H_CPU_BEHAV_BNDS_CHK_SPEC_BAR	(1ull << 61) // IBM bit 2
+#define H_CPU_BEHAV_FAVOUR_SECURITY_H	(1ull << 60) // IBM bit 3
+#define H_CPU_BEHAV_FLUSH_COUNT_CACHE	(1ull << 58) // IBM bit 5
+#define H_CPU_BEHAV_FLUSH_LINK_STACK	(1ull << 57) // IBM bit 6
+#define H_CPU_BEHAV_NO_L1D_FLUSH_ENTRY	(1ull << 56) // IBM bit 7
+#define H_CPU_BEHAV_NO_L1D_FLUSH_UACCESS (1ull << 55) // IBM bit 8
+#define H_CPU_BEHAV_NO_STF_BARRIER	(1ull << 54) // IBM bit 9
+
+/* Flag values used in H_REGISTER_PROC_TBL hcall */
+#define PROC_TABLE_OP_MASK	0x18
+#define PROC_TABLE_DEREG	0x10
+#define PROC_TABLE_NEW		0x18
+#define PROC_TABLE_TYPE_MASK	0x06
+#define PROC_TABLE_HPT_SLB	0x00
+#define PROC_TABLE_HPT_PT	0x02
+#define PROC_TABLE_RADIX	0x04
+#define PROC_TABLE_GTSE		0x01
+
+/*
+ * Defines for
+ * H_RPT_INVALIDATE - Invalidate RPT translation lookaside information.
+ */
+
+/* Type of translation to invalidate (type) */
+#define H_RPTI_TYPE_NESTED	0x0001	/* Invalidate nested guest partition-scope */
+#define H_RPTI_TYPE_TLB		0x0002	/* Invalidate TLB */
+#define H_RPTI_TYPE_PWC		0x0004	/* Invalidate Page Walk Cache */
+/* Invalidate caching of Process Table Entries if H_RPTI_TYPE_NESTED is clear */
+#define H_RPTI_TYPE_PRT		0x0008
+/* Invalidate caching of Partition Table Entries if H_RPTI_TYPE_NESTED is set */
+#define H_RPTI_TYPE_PAT		0x0008
+#define H_RPTI_TYPE_ALL		(H_RPTI_TYPE_TLB | H_RPTI_TYPE_PWC | \
+				 H_RPTI_TYPE_PRT)
+#define H_RPTI_TYPE_NESTED_ALL	(H_RPTI_TYPE_TLB | H_RPTI_TYPE_PWC | \
+				 H_RPTI_TYPE_PAT)
+
+/* Invalidation targets (target) */
+#define H_RPTI_TARGET_CMMU		0x01 /* All virtual processors in the partition */
+#define H_RPTI_TARGET_CMMU_LOCAL	0x02 /* Current virtual processor */
+/* All nest/accelerator agents in use by the partition */
+#define H_RPTI_TARGET_NMMU		0x04
+
+/* Page size mask (page sizes) */
+#define H_RPTI_PAGE_4K	0x01
+#define H_RPTI_PAGE_64K	0x02
+#define H_RPTI_PAGE_2M	0x04
+#define H_RPTI_PAGE_1G	0x08
+#define H_RPTI_PAGE_ALL (-1UL)
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
+/**
+ * plpar_hcall_norets: - Make a pseries hypervisor call with no return arguments
+ * @opcode: The hypervisor call to make.
+ *
+ * This call supports up to 7 arguments and only returns the status of
+ * the hcall. Use this version where possible, its slightly faster than
+ * the other plpar_hcalls.
+ */
+long plpar_hcall_norets(unsigned long opcode, ...);
+
+/* Variant which does not do hcall tracing */
+long plpar_hcall_norets_notrace(unsigned long opcode, ...);
+
+/**
+ * plpar_hcall: - Make a pseries hypervisor call
+ * @opcode: The hypervisor call to make.
+ * @retbuf: Buffer to store up to 4 return arguments in.
+ *
+ * This call supports up to 6 arguments and 4 return arguments. Use
+ * PLPAR_HCALL_BUFSIZE to size the return argument buffer.
+ *
+ * Used for all but the craziest of phyp interfaces (see plpar_hcall9)
+ */
+#define PLPAR_HCALL_BUFSIZE 4
+long plpar_hcall(unsigned long opcode, unsigned long *retbuf, ...);
+
+/**
+ * plpar_hcall_raw: - Make a hypervisor call without calculating hcall stats
+ * @opcode: The hypervisor call to make.
+ * @retbuf: Buffer to store up to 4 return arguments in.
+ *
+ * This call supports up to 6 arguments and 4 return arguments. Use
+ * PLPAR_HCALL_BUFSIZE to size the return argument buffer.
+ *
+ * Used when phyp interface needs to be called in real mode. Similar to
+ * plpar_hcall, but plpar_hcall_raw works in real mode and does not
+ * calculate hypervisor call statistics.
+ */
+long plpar_hcall_raw(unsigned long opcode, unsigned long *retbuf, ...);
+
+/**
+ * plpar_hcall9: - Make a pseries hypervisor call with up to 9 return arguments
+ * @opcode: The hypervisor call to make.
+ * @retbuf: Buffer to store up to 9 return arguments in.
+ *
+ * This call supports up to 9 arguments and 9 return arguments. Use
+ * PLPAR_HCALL9_BUFSIZE to size the return argument buffer.
+ */
+#define PLPAR_HCALL9_BUFSIZE 9
+long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...);
+long plpar_hcall9_raw(unsigned long opcode, unsigned long *retbuf, ...);
+
+/* pseries hcall tracing */
+extern struct static_key hcall_tracepoint_key;
+void __trace_hcall_entry(unsigned long opcode, unsigned long *args);
+void __trace_hcall_exit(long opcode, long retval, unsigned long *retbuf);
+
+struct hvcall_mpp_data {
+	unsigned long entitled_mem;
+	unsigned long mapped_mem;
+	unsigned short group_num;
+	unsigned short pool_num;
+	unsigned char mem_weight;
+	unsigned char unallocated_mem_weight;
+	unsigned long unallocated_entitlement;  /* value in bytes */
+	unsigned long pool_size;
+	signed long loan_request;
+	unsigned long backing_mem;
+};
+
+int h_get_mpp(struct hvcall_mpp_data *);
+
+struct hvcall_mpp_x_data {
+	unsigned long coalesced_bytes;
+	unsigned long pool_coalesced_bytes;
+	unsigned long pool_purr_cycles;
+	unsigned long pool_spurr_cycles;
+	unsigned long reserved[3];
+};
+
+int h_get_mpp_x(struct hvcall_mpp_x_data *mpp_x_data);
+
+static inline unsigned int get_longbusy_msecs(int longbusy_rc)
+{
+	switch (longbusy_rc) {
+	case H_LONG_BUSY_ORDER_1_MSEC:
+		return 1;
+	case H_LONG_BUSY_ORDER_10_MSEC:
+		return 10;
+	case H_LONG_BUSY_ORDER_100_MSEC:
+		return 100;
+	case H_LONG_BUSY_ORDER_1_SEC:
+		return 1000;
+	case H_LONG_BUSY_ORDER_10_SEC:
+		return 10000;
+	case H_LONG_BUSY_ORDER_100_SEC:
+		return 100000;
+	default:
+		return 1;
+	}
+}
+
+struct h_cpu_char_result {
+	u64 character;
+	u64 behaviour;
+};
+
+/*
+ * Register state for entering a nested guest with H_ENTER_NESTED.
+ * New member must be added at the end.
+ */
+struct hv_guest_state {
+	u64 version;		/* version of this structure layout, must be first */
+	u32 lpid;
+	u32 vcpu_token;
+	/* These registers are hypervisor privileged (at least for writing) */
+	u64 lpcr;
+	u64 pcr;
+	u64 amor;
+	u64 dpdes;
+	u64 hfscr;
+	s64 tb_offset;
+	u64 dawr0;
+	u64 dawrx0;
+	u64 ciabr;
+	u64 hdec_expiry;
+	u64 purr;
+	u64 spurr;
+	u64 ic;
+	u64 vtb;
+	u64 hdar;
+	u64 hdsisr;
+	u64 heir;
+	u64 asdr;
+	/* These are OS privileged but need to be set late in guest entry */
+	u64 srr0;
+	u64 srr1;
+	u64 sprg[4];
+	u64 pidr;
+	u64 cfar;
+	u64 ppr;
+	/* Version 1 ends here */
+	u64 dawr1;
+	u64 dawrx1;
+	/* Version 2 ends here */
+};
+
+/* Latest version of hv_guest_state structure */
+#define HV_GUEST_STATE_VERSION	2
+
+static inline int hv_guest_state_size(unsigned int version)
+{
+	switch (version) {
+	case 1:
+		return offsetofend(struct hv_guest_state, ppr);
+	case 2:
+		return offsetofend(struct hv_guest_state, dawrx1);
+	default:
+		return -1;
+	}
+}
+
+/*
+ * From the document "H_GetPerformanceCounterInfo Interface" v1.07
+ *
+ * H_GET_PERF_COUNTER_INFO argument
+ */
+struct hv_get_perf_counter_info_params {
+	__be32 counter_request; /* I */
+	__be32 starting_index;  /* IO */
+	__be16 secondary_index; /* IO */
+	__be16 returned_values; /* O */
+	__be32 detail_rc; /* O, only needed when called via *_norets() */
+
+	/*
+	 * O, size each of counter_value element in bytes, only set for version
+	 * >= 0x3
+	 */
+	__be16 cv_element_size;
+
+	/* I, 0 (zero) for versions < 0x3 */
+	__u8 counter_info_version_in;
+
+	/* O, 0 (zero) if version < 0x3. Must be set to 0 when making hcall */
+	__u8 counter_info_version_out;
+	__u8 reserved[0xC];
+	__u8 counter_value[];
+} __packed;
+
+#define HGPCI_REQ_BUFFER_SIZE	4096
+#define HGPCI_MAX_DATA_BYTES \
+	(HGPCI_REQ_BUFFER_SIZE - sizeof(struct hv_get_perf_counter_info_params))
+
+struct hv_gpci_request_buffer {
+	struct hv_get_perf_counter_info_params params;
+	uint8_t bytes[HGPCI_MAX_DATA_BYTES];
+} __packed;
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_HVCALL_H */