Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 805 insertions, 0 deletions

diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
new file mode 100644
index 000000000..c8f044d62
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -0,0 +1,805 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Freescale MPC85xx/MPC86xx RapidIO support
+ *
+ * Copyright 2009 Sysgo AG
+ * Thomas Moll <thomas.moll@sysgo.com>
+ * - fixed maintenance access routines, check for aligned access
+ *
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@idt.com>
+ * - Added Port-Write message handling
+ * - Added Machine Check exception handling
+ *
+ * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc.
+ * Zhang Wei <wei.zhang@freescale.com>
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ */
+
+#include <linux/init.h>
+#include <linux/extable.h>
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <asm/machdep.h>
+
+#include "fsl_rio.h"
+
+#undef DEBUG_PW	/* Port-Write debugging */
+
+#define RIO_PORT1_EDCSR		0x0640
+#define RIO_PORT2_EDCSR		0x0680
+#define RIO_PORT1_IECSR		0x10130
+#define RIO_PORT2_IECSR		0x101B0
+
+#define RIO_GCCSR		0x13c
+#define RIO_ESCSR		0x158
+#define ESCSR_CLEAR		0x07120204
+#define RIO_PORT2_ESCSR		0x178
+#define RIO_CCSR		0x15c
+#define RIO_LTLEDCSR_IER	0x80000000
+#define RIO_LTLEDCSR_PRT	0x01000000
+#define IECSR_CLEAR		0x80000000
+#define RIO_ISR_AACR		0x10120
+#define RIO_ISR_AACR_AA		0x1	/* Accept All ID */
+
+#define RIWTAR_TRAD_VAL_SHIFT	12
+#define RIWTAR_TRAD_MASK	0x00FFFFFF
+#define RIWBAR_BADD_VAL_SHIFT	12
+#define RIWBAR_BADD_MASK	0x003FFFFF
+#define RIWAR_ENABLE		0x80000000
+#define RIWAR_TGINT_LOCAL	0x00F00000
+#define RIWAR_RDTYP_NO_SNOOP	0x00040000
+#define RIWAR_RDTYP_SNOOP	0x00050000
+#define RIWAR_WRTYP_NO_SNOOP	0x00004000
+#define RIWAR_WRTYP_SNOOP	0x00005000
+#define RIWAR_WRTYP_ALLOC	0x00006000
+#define RIWAR_SIZE_MASK		0x0000003F
+
+static DEFINE_SPINLOCK(fsl_rio_config_lock);
+
+#define ___fsl_read_rio_config(x, addr, err, op, barrier)	\
+	__asm__ __volatile__(				\
+		"1:	"op" %1,0(%2)\n"		\
+		"	"barrier"\n"			\
+		"2:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"3:	li %1,-1\n"			\
+		"	li %0,%3\n"			\
+		"	b 2b\n"				\
+		".previous\n"				\
+		EX_TABLE(1b, 3b)			\
+		: "=r" (err), "=r" (x)			\
+		: "b" (addr), "i" (-EFAULT), "0" (err))
+
+#ifdef CONFIG_BOOKE
+#define __fsl_read_rio_config(x, addr, err, op)	\
+	___fsl_read_rio_config(x, addr, err, op, "mbar")
+#else
+#define __fsl_read_rio_config(x, addr, err, op)	\
+	___fsl_read_rio_config(x, addr, err, op, "eieio")
+#endif
+
+void __iomem *rio_regs_win;
+void __iomem *rmu_regs_win;
+resource_size_t rio_law_start;
+
+struct fsl_rio_dbell *dbell;
+struct fsl_rio_pw *pw;
+
+#ifdef CONFIG_PPC_E500
+int fsl_rio_mcheck_exception(struct pt_regs *regs)
+{
+	const struct exception_table_entry *entry;
+	unsigned long reason;
+
+	if (!rio_regs_win)
+		return 0;
+
+	reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR));
+	if (reason & (RIO_LTLEDCSR_IER | RIO_LTLEDCSR_PRT)) {
+		/* Check if we are prepared to handle this fault */
+		entry = search_exception_tables(regs->nip);
+		if (entry) {
+			pr_debug("RIO: %s - MC Exception handled\n",
+				 __func__);
+			out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR),
+				 0);
+			regs_set_recoverable(regs);
+			regs_set_return_ip(regs, extable_fixup(entry));
+			return 1;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fsl_rio_mcheck_exception);
+#endif
+
+/**
+ * fsl_local_config_read - Generate a MPC85xx local config space read
+ * @mport: RapidIO master port info
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be read into
+ *
+ * Generates a MPC85xx local configuration space read. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int fsl_local_config_read(struct rio_mport *mport,
+				int index, u32 offset, int len, u32 *data)
+{
+	struct rio_priv *priv = mport->priv;
+	pr_debug("fsl_local_config_read: index %d offset %8.8x\n", index,
+		 offset);
+	*data = in_be32(priv->regs_win + offset);
+
+	return 0;
+}
+
+/**
+ * fsl_local_config_write - Generate a MPC85xx local config space write
+ * @mport: RapidIO master port info
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be written
+ *
+ * Generates a MPC85xx local configuration space write. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int fsl_local_config_write(struct rio_mport *mport,
+				int index, u32 offset, int len, u32 data)
+{
+	struct rio_priv *priv = mport->priv;
+	pr_debug
+		("fsl_local_config_write: index %d offset %8.8x data %8.8x\n",
+		index, offset, data);
+	out_be32(priv->regs_win + offset, data);
+
+	return 0;
+}
+
+/**
+ * fsl_rio_config_read - Generate a MPC85xx read maintenance transaction
+ * @mport: RapidIO master port info
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Location to be read into
+ *
+ * Generates a MPC85xx read maintenance transaction. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int
+fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid,
+			u8 hopcount, u32 offset, int len, u32 *val)
+{
+	struct rio_priv *priv = mport->priv;
+	unsigned long flags;
+	u8 *data;
+	u32 rval, err = 0;
+
+	pr_debug
+		("fsl_rio_config_read:"
+		" index %d destid %d hopcount %d offset %8.8x len %d\n",
+		index, destid, hopcount, offset, len);
+
+	/* 16MB maintenance window possible */
+	/* allow only aligned access to maintenance registers */
+	if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len))
+		return -EINVAL;
+
+	spin_lock_irqsave(&fsl_rio_config_lock, flags);
+
+	out_be32(&priv->maint_atmu_regs->rowtar,
+		 (destid << 22) | (hopcount << 12) | (offset >> 12));
+	out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
+
+	data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
+	switch (len) {
+	case 1:
+		__fsl_read_rio_config(rval, data, err, "lbz");
+		break;
+	case 2:
+		__fsl_read_rio_config(rval, data, err, "lhz");
+		break;
+	case 4:
+		__fsl_read_rio_config(rval, data, err, "lwz");
+		break;
+	default:
+		spin_unlock_irqrestore(&fsl_rio_config_lock, flags);
+		return -EINVAL;
+	}
+
+	if (err) {
+		pr_debug("RIO: cfg_read error %d for %x:%x:%x\n",
+			 err, destid, hopcount, offset);
+	}
+
+	spin_unlock_irqrestore(&fsl_rio_config_lock, flags);
+	*val = rval;
+
+	return err;
+}
+
+/**
+ * fsl_rio_config_write - Generate a MPC85xx write maintenance transaction
+ * @mport: RapidIO master port info
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Value to be written
+ *
+ * Generates an MPC85xx write maintenance transaction. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int
+fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
+			u8 hopcount, u32 offset, int len, u32 val)
+{
+	struct rio_priv *priv = mport->priv;
+	unsigned long flags;
+	u8 *data;
+	int ret = 0;
+
+	pr_debug
+		("fsl_rio_config_write:"
+		" index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
+		index, destid, hopcount, offset, len, val);
+
+	/* 16MB maintenance windows possible */
+	/* allow only aligned access to maintenance registers */
+	if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len))
+		return -EINVAL;
+
+	spin_lock_irqsave(&fsl_rio_config_lock, flags);
+
+	out_be32(&priv->maint_atmu_regs->rowtar,
+		 (destid << 22) | (hopcount << 12) | (offset >> 12));
+	out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
+
+	data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
+	switch (len) {
+	case 1:
+		out_8((u8 *) data, val);
+		break;
+	case 2:
+		out_be16((u16 *) data, val);
+		break;
+	case 4:
+		out_be32((u32 *) data, val);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	spin_unlock_irqrestore(&fsl_rio_config_lock, flags);
+
+	return ret;
+}
+
+static void fsl_rio_inbound_mem_init(struct rio_priv *priv)
+{
+	int i;
+
+	/* close inbound windows */
+	for (i = 0; i < RIO_INB_ATMU_COUNT; i++)
+		out_be32(&priv->inb_atmu_regs[i].riwar, 0);
+}
+
+int fsl_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart,
+	u64 rstart, u64 size, u32 flags)
+{
+	struct rio_priv *priv = mport->priv;
+	u32 base_size;
+	unsigned int base_size_log;
+	u64 win_start, win_end;
+	u32 riwar;
+	int i;
+
+	if ((size & (size - 1)) != 0 || size > 0x400000000ULL)
+		return -EINVAL;
+
+	base_size_log = ilog2(size);
+	base_size = 1 << base_size_log;
+
+	/* check if addresses are aligned with the window size */
+	if (lstart & (base_size - 1))
+		return -EINVAL;
+	if (rstart & (base_size - 1))
+		return -EINVAL;
+
+	/* check for conflicting ranges */
+	for (i = 0; i < RIO_INB_ATMU_COUNT; i++) {
+		riwar = in_be32(&priv->inb_atmu_regs[i].riwar);
+		if ((riwar & RIWAR_ENABLE) == 0)
+			continue;
+		win_start = ((u64)(in_be32(&priv->inb_atmu_regs[i].riwbar) & RIWBAR_BADD_MASK))
+			<< RIWBAR_BADD_VAL_SHIFT;
+		win_end = win_start + ((1 << ((riwar & RIWAR_SIZE_MASK) + 1)) - 1);
+		if (rstart < win_end && (rstart + size) > win_start)
+			return -EINVAL;
+	}
+
+	/* find unused atmu */
+	for (i = 0; i < RIO_INB_ATMU_COUNT; i++) {
+		riwar = in_be32(&priv->inb_atmu_regs[i].riwar);
+		if ((riwar & RIWAR_ENABLE) == 0)
+			break;
+	}
+	if (i >= RIO_INB_ATMU_COUNT)
+		return -ENOMEM;
+
+	out_be32(&priv->inb_atmu_regs[i].riwtar, lstart >> RIWTAR_TRAD_VAL_SHIFT);
+	out_be32(&priv->inb_atmu_regs[i].riwbar, rstart >> RIWBAR_BADD_VAL_SHIFT);
+	out_be32(&priv->inb_atmu_regs[i].riwar, RIWAR_ENABLE | RIWAR_TGINT_LOCAL |
+		RIWAR_RDTYP_SNOOP | RIWAR_WRTYP_SNOOP | (base_size_log - 1));
+
+	return 0;
+}
+
+void fsl_unmap_inb_mem(struct rio_mport *mport, dma_addr_t lstart)
+{
+	u32 win_start_shift, base_start_shift;
+	struct rio_priv *priv = mport->priv;
+	u32 riwar, riwtar;
+	int i;
+
+	/* skip default window */
+	base_start_shift = lstart >> RIWTAR_TRAD_VAL_SHIFT;
+	for (i = 0; i < RIO_INB_ATMU_COUNT; i++) {
+		riwar = in_be32(&priv->inb_atmu_regs[i].riwar);
+		if ((riwar & RIWAR_ENABLE) == 0)
+			continue;
+
+		riwtar = in_be32(&priv->inb_atmu_regs[i].riwtar);
+		win_start_shift = riwtar & RIWTAR_TRAD_MASK;
+		if (win_start_shift == base_start_shift) {
+			out_be32(&priv->inb_atmu_regs[i].riwar, riwar & ~RIWAR_ENABLE);
+			return;
+		}
+	}
+}
+
+void fsl_rio_port_error_handler(int offset)
+{
+	/*XXX: Error recovery is not implemented, we just clear errors */
+	out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
+
+	if (offset == 0) {
+		out_be32((u32 *)(rio_regs_win + RIO_PORT1_EDCSR), 0);
+		out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), IECSR_CLEAR);
+		out_be32((u32 *)(rio_regs_win + RIO_ESCSR), ESCSR_CLEAR);
+	} else {
+		out_be32((u32 *)(rio_regs_win + RIO_PORT2_EDCSR), 0);
+		out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), IECSR_CLEAR);
+		out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR);
+	}
+}
+static inline void fsl_rio_info(struct device *dev, u32 ccsr)
+{
+	const char *str;
+	if (ccsr & 1) {
+		/* Serial phy */
+		switch (ccsr >> 30) {
+		case 0:
+			str = "1";
+			break;
+		case 1:
+			str = "4";
+			break;
+		default:
+			str = "Unknown";
+			break;
+		}
+		dev_info(dev, "Hardware port width: %s\n", str);
+
+		switch ((ccsr >> 27) & 7) {
+		case 0:
+			str = "Single-lane 0";
+			break;
+		case 1:
+			str = "Single-lane 2";
+			break;
+		case 2:
+			str = "Four-lane";
+			break;
+		default:
+			str = "Unknown";
+			break;
+		}
+		dev_info(dev, "Training connection status: %s\n", str);
+	} else {
+		/* Parallel phy */
+		if (!(ccsr & 0x80000000))
+			dev_info(dev, "Output port operating in 8-bit mode\n");
+		if (!(ccsr & 0x08000000))
+			dev_info(dev, "Input port operating in 8-bit mode\n");
+	}
+}
+
+/**
+ * fsl_rio_setup - Setup Freescale PowerPC RapidIO interface
+ * @dev: platform_device pointer
+ *
+ * Initializes MPC85xx RapidIO hardware interface, configures
+ * master port with system-specific info, and registers the
+ * master port with the RapidIO subsystem.
+ */
+int fsl_rio_setup(struct platform_device *dev)
+{
+	struct rio_ops *ops;
+	struct rio_mport *port;
+	struct rio_priv *priv;
+	int rc = 0;
+	const u32 *dt_range, *cell, *port_index;
+	u32 active_ports = 0;
+	struct resource regs, rmu_regs;
+	struct device_node *np, *rmu_node;
+	int rlen;
+	u32 ccsr;
+	u64 range_start, range_size;
+	int paw, aw, sw;
+	u32 i;
+	static int tmp;
+	struct device_node *rmu_np[MAX_MSG_UNIT_NUM] = {NULL};
+
+	if (!dev->dev.of_node) {
+		dev_err(&dev->dev, "Device OF-Node is NULL");
+		return -ENODEV;
+	}
+
+	rc = of_address_to_resource(dev->dev.of_node, 0, &regs);
+	if (rc) {
+		dev_err(&dev->dev, "Can't get %pOF property 'reg'\n",
+				dev->dev.of_node);
+		return -EFAULT;
+	}
+	dev_info(&dev->dev, "Of-device full name %pOF\n",
+			dev->dev.of_node);
+	dev_info(&dev->dev, "Regs: %pR\n", &regs);
+
+	rio_regs_win = ioremap(regs.start, resource_size(&regs));
+	if (!rio_regs_win) {
+		dev_err(&dev->dev, "Unable to map rio register window\n");
+		rc = -ENOMEM;
+		goto err_rio_regs;
+	}
+
+	ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL);
+	if (!ops) {
+		rc = -ENOMEM;
+		goto err_ops;
+	}
+	ops->lcread = fsl_local_config_read;
+	ops->lcwrite = fsl_local_config_write;
+	ops->cread = fsl_rio_config_read;
+	ops->cwrite = fsl_rio_config_write;
+	ops->dsend = fsl_rio_doorbell_send;
+	ops->pwenable = fsl_rio_pw_enable;
+	ops->open_outb_mbox = fsl_open_outb_mbox;
+	ops->open_inb_mbox = fsl_open_inb_mbox;
+	ops->close_outb_mbox = fsl_close_outb_mbox;
+	ops->close_inb_mbox = fsl_close_inb_mbox;
+	ops->add_outb_message = fsl_add_outb_message;
+	ops->add_inb_buffer = fsl_add_inb_buffer;
+	ops->get_inb_message = fsl_get_inb_message;
+	ops->map_inb = fsl_map_inb_mem;
+	ops->unmap_inb = fsl_unmap_inb_mem;
+
+	rmu_node = of_parse_phandle(dev->dev.of_node, "fsl,srio-rmu-handle", 0);
+	if (!rmu_node) {
+		dev_err(&dev->dev, "No valid fsl,srio-rmu-handle property\n");
+		rc = -ENOENT;
+		goto err_rmu;
+	}
+	rc = of_address_to_resource(rmu_node, 0, &rmu_regs);
+	if (rc) {
+		dev_err(&dev->dev, "Can't get %pOF property 'reg'\n",
+				rmu_node);
+		of_node_put(rmu_node);
+		goto err_rmu;
+	}
+	of_node_put(rmu_node);
+	rmu_regs_win = ioremap(rmu_regs.start, resource_size(&rmu_regs));
+	if (!rmu_regs_win) {
+		dev_err(&dev->dev, "Unable to map rmu register window\n");
+		rc = -ENOMEM;
+		goto err_rmu;
+	}
+	for_each_compatible_node(np, NULL, "fsl,srio-msg-unit") {
+		rmu_np[tmp] = np;
+		tmp++;
+	}
+
+	/*set up doobell node*/
+	np = of_find_compatible_node(NULL, NULL, "fsl,srio-dbell-unit");
+	if (!np) {
+		dev_err(&dev->dev, "No fsl,srio-dbell-unit node\n");
+		rc = -ENODEV;
+		goto err_dbell;
+	}
+	dbell = kzalloc(sizeof(struct fsl_rio_dbell), GFP_KERNEL);
+	if (!(dbell)) {
+		dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_dbell'\n");
+		rc = -ENOMEM;
+		goto err_dbell;
+	}
+	dbell->dev = &dev->dev;
+	dbell->bellirq = irq_of_parse_and_map(np, 1);
+	dev_info(&dev->dev, "bellirq: %d\n", dbell->bellirq);
+
+	aw = of_n_addr_cells(np);
+	dt_range = of_get_property(np, "reg", &rlen);
+	if (!dt_range) {
+		pr_err("%pOF: unable to find 'reg' property\n",
+			np);
+		rc = -ENOMEM;
+		goto err_pw;
+	}
+	range_start = of_read_number(dt_range, aw);
+	dbell->dbell_regs = (struct rio_dbell_regs *)(rmu_regs_win +
+				(u32)range_start);
+
+	/*set up port write node*/
+	np = of_find_compatible_node(NULL, NULL, "fsl,srio-port-write-unit");
+	if (!np) {
+		dev_err(&dev->dev, "No fsl,srio-port-write-unit node\n");
+		rc = -ENODEV;
+		goto err_pw;
+	}
+	pw = kzalloc(sizeof(struct fsl_rio_pw), GFP_KERNEL);
+	if (!(pw)) {
+		dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_pw'\n");
+		rc = -ENOMEM;
+		goto err_pw;
+	}
+	pw->dev = &dev->dev;
+	pw->pwirq = irq_of_parse_and_map(np, 0);
+	dev_info(&dev->dev, "pwirq: %d\n", pw->pwirq);
+	aw = of_n_addr_cells(np);
+	dt_range = of_get_property(np, "reg", &rlen);
+	if (!dt_range) {
+		pr_err("%pOF: unable to find 'reg' property\n",
+			np);
+		rc = -ENOMEM;
+		goto err;
+	}
+	range_start = of_read_number(dt_range, aw);
+	pw->pw_regs = (struct rio_pw_regs *)(rmu_regs_win + (u32)range_start);
+
+	/*set up ports node*/
+	for_each_child_of_node(dev->dev.of_node, np) {
+		port_index = of_get_property(np, "cell-index", NULL);
+		if (!port_index) {
+			dev_err(&dev->dev, "Can't get %pOF property 'cell-index'\n",
+					np);
+			continue;
+		}
+
+		dt_range = of_get_property(np, "ranges", &rlen);
+		if (!dt_range) {
+			dev_err(&dev->dev, "Can't get %pOF property 'ranges'\n",
+					np);
+			continue;
+		}
+
+		/* Get node address wide */
+		cell = of_get_property(np, "#address-cells", NULL);
+		if (cell)
+			aw = *cell;
+		else
+			aw = of_n_addr_cells(np);
+		/* Get node size wide */
+		cell = of_get_property(np, "#size-cells", NULL);
+		if (cell)
+			sw = *cell;
+		else
+			sw = of_n_size_cells(np);
+		/* Get parent address wide wide */
+		paw = of_n_addr_cells(np);
+		range_start = of_read_number(dt_range + aw, paw);
+		range_size = of_read_number(dt_range + aw + paw, sw);
+
+		dev_info(&dev->dev, "%pOF: LAW start 0x%016llx, size 0x%016llx.\n",
+				np, range_start, range_size);
+
+		port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
+		if (!port)
+			continue;
+
+		rc = rio_mport_initialize(port);
+		if (rc) {
+			kfree(port);
+			continue;
+		}
+
+		i = *port_index - 1;
+		port->index = (unsigned char)i;
+
+		priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL);
+		if (!priv) {
+			dev_err(&dev->dev, "Can't alloc memory for 'priv'\n");
+			kfree(port);
+			continue;
+		}
+
+		INIT_LIST_HEAD(&port->dbells);
+		port->iores.start = range_start;
+		port->iores.end = port->iores.start + range_size - 1;
+		port->iores.flags = IORESOURCE_MEM;
+		port->iores.name = "rio_io_win";
+
+		if (request_resource(&iomem_resource, &port->iores) < 0) {
+			dev_err(&dev->dev, "RIO: Error requesting master port region"
+				" 0x%016llx-0x%016llx\n",
+				(u64)port->iores.start, (u64)port->iores.end);
+				kfree(priv);
+				kfree(port);
+				continue;
+		}
+		sprintf(port->name, "RIO mport %d", i);
+
+		priv->dev = &dev->dev;
+		port->dev.parent = &dev->dev;
+		port->ops = ops;
+		port->priv = priv;
+		port->phys_efptr = 0x100;
+		port->phys_rmap = 1;
+		priv->regs_win = rio_regs_win;
+
+		ccsr = in_be32(priv->regs_win + RIO_CCSR + i*0x20);
+
+		/* Checking the port training status */
+		if (in_be32((priv->regs_win + RIO_ESCSR + i*0x20)) & 1) {
+			dev_err(&dev->dev, "Port %d is not ready. "
+			"Try to restart connection...\n", i);
+			/* Disable ports */
+			out_be32(priv->regs_win
+				+ RIO_CCSR + i*0x20, 0);
+			/* Set 1x lane */
+			setbits32(priv->regs_win
+				+ RIO_CCSR + i*0x20, 0x02000000);
+			/* Enable ports */
+			setbits32(priv->regs_win
+				+ RIO_CCSR + i*0x20, 0x00600000);
+			msleep(100);
+			if (in_be32((priv->regs_win
+					+ RIO_ESCSR + i*0x20)) & 1) {
+				dev_err(&dev->dev,
+					"Port %d restart failed.\n", i);
+				release_resource(&port->iores);
+				kfree(priv);
+				kfree(port);
+				continue;
+			}
+			dev_info(&dev->dev, "Port %d restart success!\n", i);
+		}
+		fsl_rio_info(&dev->dev, ccsr);
+
+		port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
+					& RIO_PEF_CTLS) >> 4;
+		dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
+				port->sys_size ? 65536 : 256);
+
+		if (port->host_deviceid >= 0)
+			out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST |
+				RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED);
+		else
+			out_be32(priv->regs_win + RIO_GCCSR,
+				RIO_PORT_GEN_MASTER);
+
+		priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
+			+ ((i == 0) ? RIO_ATMU_REGS_PORT1_OFFSET :
+			RIO_ATMU_REGS_PORT2_OFFSET));
+
+		priv->maint_atmu_regs = priv->atmu_regs + 1;
+		priv->inb_atmu_regs = (struct rio_inb_atmu_regs __iomem *)
+			(priv->regs_win +
+			((i == 0) ? RIO_INB_ATMU_REGS_PORT1_OFFSET :
+			RIO_INB_ATMU_REGS_PORT2_OFFSET));
+
+		/* Set to receive packets with any dest ID */
+		out_be32((priv->regs_win + RIO_ISR_AACR + i*0x80),
+			 RIO_ISR_AACR_AA);
+
+		/* Configure maintenance transaction window */
+		out_be32(&priv->maint_atmu_regs->rowbar,
+			port->iores.start >> 12);
+		out_be32(&priv->maint_atmu_regs->rowar,
+			 0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1));
+
+		priv->maint_win = ioremap(port->iores.start,
+				RIO_MAINT_WIN_SIZE);
+
+		rio_law_start = range_start;
+
+		fsl_rio_setup_rmu(port, rmu_np[i]);
+		fsl_rio_inbound_mem_init(priv);
+
+		dbell->mport[i] = port;
+		pw->mport[i] = port;
+
+		if (rio_register_mport(port)) {
+			release_resource(&port->iores);
+			kfree(priv);
+			kfree(port);
+			continue;
+		}
+		active_ports++;
+	}
+
+	if (!active_ports) {
+		rc = -ENOLINK;
+		goto err;
+	}
+
+	fsl_rio_doorbell_init(dbell);
+	fsl_rio_port_write_init(pw);
+
+	return 0;
+err:
+	kfree(pw);
+	pw = NULL;
+err_pw:
+	kfree(dbell);
+	dbell = NULL;
+err_dbell:
+	iounmap(rmu_regs_win);
+	rmu_regs_win = NULL;
+err_rmu:
+	kfree(ops);
+err_ops:
+	iounmap(rio_regs_win);
+	rio_regs_win = NULL;
+err_rio_regs:
+	return rc;
+}
+
+/* The probe function for RapidIO peer-to-peer network.
+ */
+static int fsl_of_rio_rpn_probe(struct platform_device *dev)
+{
+	printk(KERN_INFO "Setting up RapidIO peer-to-peer network %pOF\n",
+			dev->dev.of_node);
+
+	return fsl_rio_setup(dev);
+};
+
+static const struct of_device_id fsl_of_rio_rpn_ids[] = {
+	{
+		.compatible = "fsl,srio",
+	},
+	{},
+};
+
+static struct platform_driver fsl_of_rio_rpn_driver = {
+	.driver = {
+		.name = "fsl-of-rio",
+		.of_match_table = fsl_of_rio_rpn_ids,
+	},
+	.probe = fsl_of_rio_rpn_probe,
+};
+
+static __init int fsl_of_rio_rpn_init(void)
+{
+	return platform_driver_register(&fsl_of_rio_rpn_driver);
+}
+
+subsys_initcall(fsl_of_rio_rpn_init);