Adding upstream version 6.1.82.upstream/6.1.82

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 139 insertions, 13 deletions

diff --git a/arch/x86/boot/compressed/mem_encrypt.S b/arch/x86/boot/compressed/mem_encrypt.S
index a73e4d783..32f7cc8a8 100644
--- a/arch/x86/boot/compressed/mem_encrypt.S
+++ b/arch/x86/boot/compressed/mem_encrypt.S
@@ -12,16 +12,13 @@
 #include <asm/processor-flags.h>
 #include <asm/msr.h>
 #include <asm/asm-offsets.h>
+#include <asm/segment.h>
+#include <asm/trapnr.h>
 
 	.text
 	.code32
 SYM_FUNC_START(get_sev_encryption_bit)
-	xor	%eax, %eax
-
-#ifdef CONFIG_AMD_MEM_ENCRYPT
 	push	%ebx
-	push	%ecx
-	push	%edx
 
 	movl	$0x80000000, %eax	/* CPUID to check the highest leaf */
 	cpuid
@@ -52,12 +49,7 @@ SYM_FUNC_START(get_sev_encryption_bit)
 	xor	%eax, %eax
 
 .Lsev_exit:
-	pop	%edx
-	pop	%ecx
 	pop	%ebx
-
-#endif	/* CONFIG_AMD_MEM_ENCRYPT */
-
 	RET
 SYM_FUNC_END(get_sev_encryption_bit)
 
@@ -98,7 +90,7 @@ SYM_CODE_START_LOCAL(sev_es_req_cpuid)
 	jmp	1b
 SYM_CODE_END(sev_es_req_cpuid)
 
-SYM_CODE_START(startup32_vc_handler)
+SYM_CODE_START_LOCAL(startup32_vc_handler)
 	pushl	%eax
 	pushl	%ebx
 	pushl	%ecx
@@ -184,15 +176,149 @@ SYM_CODE_START(startup32_vc_handler)
 	jmp .Lfail
 SYM_CODE_END(startup32_vc_handler)
 
+/*
+ * Write an IDT entry into boot32_idt
+ *
+ * Parameters:
+ *
+ * %eax:	Handler address
+ * %edx:	Vector number
+ * %ecx:	IDT address
+ */
+SYM_FUNC_START_LOCAL(startup32_set_idt_entry)
+	/* IDT entry address to %ecx */
+	leal	(%ecx, %edx, 8), %ecx
+
+	/* Build IDT entry, lower 4 bytes */
+	movl    %eax, %edx
+	andl    $0x0000ffff, %edx		# Target code segment offset [15:0]
+	orl	$(__KERNEL32_CS << 16), %edx	# Target code segment selector
+
+	/* Store lower 4 bytes to IDT */
+	movl    %edx, (%ecx)
+
+	/* Build IDT entry, upper 4 bytes */
+	movl    %eax, %edx
+	andl    $0xffff0000, %edx	# Target code segment offset [31:16]
+	orl     $0x00008e00, %edx	# Present, Type 32-bit Interrupt Gate
+
+	/* Store upper 4 bytes to IDT */
+	movl    %edx, 4(%ecx)
+
+	RET
+SYM_FUNC_END(startup32_set_idt_entry)
+
+SYM_FUNC_START(startup32_load_idt)
+	push	%ebp
+	push	%ebx
+
+	call	1f
+1:	pop	%ebp
+
+	leal    (boot32_idt - 1b)(%ebp), %ebx
+
+	/* #VC handler */
+	leal    (startup32_vc_handler - 1b)(%ebp), %eax
+	movl    $X86_TRAP_VC, %edx
+	movl	%ebx, %ecx
+	call    startup32_set_idt_entry
+
+	/* Load IDT */
+	leal	(boot32_idt_desc - 1b)(%ebp), %ecx
+	movl	%ebx, 2(%ecx)
+	lidt    (%ecx)
+
+	pop	%ebx
+	pop	%ebp
+	RET
+SYM_FUNC_END(startup32_load_idt)
+
+/*
+ * Check for the correct C-bit position when the startup_32 boot-path is used.
+ *
+ * The check makes use of the fact that all memory is encrypted when paging is
+ * disabled. The function creates 64 bits of random data using the RDRAND
+ * instruction. RDRAND is mandatory for SEV guests, so always available. If the
+ * hypervisor violates that the kernel will crash right here.
+ *
+ * The 64 bits of random data are stored to a memory location and at the same
+ * time kept in the %eax and %ebx registers. Since encryption is always active
+ * when paging is off the random data will be stored encrypted in main memory.
+ *
+ * Then paging is enabled. When the C-bit position is correct all memory is
+ * still mapped encrypted and comparing the register values with memory will
+ * succeed. An incorrect C-bit position will map all memory unencrypted, so that
+ * the compare will use the encrypted random data and fail.
+ */
+SYM_FUNC_START(startup32_check_sev_cbit)
+	pushl	%ebx
+	pushl	%ebp
+
+	call	0f
+0:	popl	%ebp
+
+	/* Check for non-zero sev_status */
+	movl	(sev_status - 0b)(%ebp), %eax
+	testl	%eax, %eax
+	jz	4f
+
+	/*
+	 * Get two 32-bit random values - Don't bail out if RDRAND fails
+	 * because it is better to prevent forward progress if no random value
+	 * can be gathered.
+	 */
+1:	rdrand	%eax
+	jnc	1b
+2:	rdrand	%ebx
+	jnc	2b
+
+	/* Store to memory and keep it in the registers */
+	leal	(sev_check_data - 0b)(%ebp), %ebp
+	movl	%eax, 0(%ebp)
+	movl	%ebx, 4(%ebp)
+
+	/* Enable paging to see if encryption is active */
+	movl	%cr0, %edx			 /* Backup %cr0 in %edx */
+	movl	$(X86_CR0_PG | X86_CR0_PE), %ecx /* Enable Paging and Protected mode */
+	movl	%ecx, %cr0
+
+	cmpl	%eax, 0(%ebp)
+	jne	3f
+	cmpl	%ebx, 4(%ebp)
+	jne	3f
+
+	movl	%edx, %cr0	/* Restore previous %cr0 */
+
+	jmp	4f
+
+3:	/* Check failed - hlt the machine */
+	hlt
+	jmp	3b
+
+4:
+	popl	%ebp
+	popl	%ebx
+	RET
+SYM_FUNC_END(startup32_check_sev_cbit)
+
 	.code64
 
 #include "../../kernel/sev_verify_cbit.S"
 
 	.data
 
-#ifdef CONFIG_AMD_MEM_ENCRYPT
 	.balign	8
 SYM_DATA(sme_me_mask,		.quad 0)
 SYM_DATA(sev_status,		.quad 0)
 SYM_DATA(sev_check_data,	.quad 0)
-#endif
+
+SYM_DATA_START_LOCAL(boot32_idt)
+	.rept	32
+	.quad	0
+	.endr
+SYM_DATA_END(boot32_idt)
+
+SYM_DATA_START_LOCAL(boot32_idt_desc)
+	.word	. - boot32_idt - 1
+	.long	0
+SYM_DATA_END(boot32_idt_desc)