Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 223 insertions, 0 deletions

diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
new file mode 100644
index 000000000..ceab14b61
--- /dev/null
+++ b/arch/x86/kernel/process_32.c
@@ -0,0 +1,223 @@
+/*
+ *  Copyright (C) 1995  Linus Torvalds
+ *
+ *  Pentium III FXSR, SSE support
+ *	Gareth Hughes <gareth@valinux.com>, May 2000
+ */
+
+/*
+ * This file handles the architecture-dependent parts of process handling..
+ */
+
+#include <linux/cpu.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/sched/task.h>
+#include <linux/sched/task_stack.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/elfcore.h>
+#include <linux/smp.h>
+#include <linux/stddef.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/user.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <linux/mc146818rtc.h>
+#include <linux/export.h>
+#include <linux/kallsyms.h>
+#include <linux/ptrace.h>
+#include <linux/personality.h>
+#include <linux/percpu.h>
+#include <linux/prctl.h>
+#include <linux/ftrace.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/kdebug.h>
+#include <linux/syscalls.h>
+
+#include <asm/ldt.h>
+#include <asm/processor.h>
+#include <asm/fpu/sched.h>
+#include <asm/desc.h>
+
+#include <linux/err.h>
+
+#include <asm/tlbflush.h>
+#include <asm/cpu.h>
+#include <asm/debugreg.h>
+#include <asm/switch_to.h>
+#include <asm/vm86.h>
+#include <asm/resctrl.h>
+#include <asm/proto.h>
+
+#include "process.h"
+
+void __show_regs(struct pt_regs *regs, enum show_regs_mode mode,
+		 const char *log_lvl)
+{
+	unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L;
+	unsigned long d0, d1, d2, d3, d6, d7;
+	unsigned short gs;
+
+	savesegment(gs, gs);
+
+	show_ip(regs, log_lvl);
+
+	printk("%sEAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
+		log_lvl, regs->ax, regs->bx, regs->cx, regs->dx);
+	printk("%sESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n",
+		log_lvl, regs->si, regs->di, regs->bp, regs->sp);
+	printk("%sDS: %04x ES: %04x FS: %04x GS: %04x SS: %04x EFLAGS: %08lx\n",
+	       log_lvl, (u16)regs->ds, (u16)regs->es, (u16)regs->fs, gs, regs->ss, regs->flags);
+
+	if (mode != SHOW_REGS_ALL)
+		return;
+
+	cr0 = read_cr0();
+	cr2 = read_cr2();
+	cr3 = __read_cr3();
+	cr4 = __read_cr4();
+	printk("%sCR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n",
+		log_lvl, cr0, cr2, cr3, cr4);
+
+	get_debugreg(d0, 0);
+	get_debugreg(d1, 1);
+	get_debugreg(d2, 2);
+	get_debugreg(d3, 3);
+	get_debugreg(d6, 6);
+	get_debugreg(d7, 7);
+
+	/* Only print out debug registers if they are in their non-default state. */
+	if ((d0 == 0) && (d1 == 0) && (d2 == 0) && (d3 == 0) &&
+	    (d6 == DR6_RESERVED) && (d7 == 0x400))
+		return;
+
+	printk("%sDR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n",
+		log_lvl, d0, d1, d2, d3);
+	printk("%sDR6: %08lx DR7: %08lx\n",
+		log_lvl, d6, d7);
+}
+
+void release_thread(struct task_struct *dead_task)
+{
+	BUG_ON(dead_task->mm);
+	release_vm86_irqs(dead_task);
+}
+
+void
+start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
+{
+	loadsegment(gs, 0);
+	regs->fs		= 0;
+	regs->ds		= __USER_DS;
+	regs->es		= __USER_DS;
+	regs->ss		= __USER_DS;
+	regs->cs		= __USER_CS;
+	regs->ip		= new_ip;
+	regs->sp		= new_sp;
+	regs->flags		= X86_EFLAGS_IF;
+}
+EXPORT_SYMBOL_GPL(start_thread);
+
+
+/*
+ *	switch_to(x,y) should switch tasks from x to y.
+ *
+ * We fsave/fwait so that an exception goes off at the right time
+ * (as a call from the fsave or fwait in effect) rather than to
+ * the wrong process. Lazy FP saving no longer makes any sense
+ * with modern CPU's, and this simplifies a lot of things (SMP
+ * and UP become the same).
+ *
+ * NOTE! We used to use the x86 hardware context switching. The
+ * reason for not using it any more becomes apparent when you
+ * try to recover gracefully from saved state that is no longer
+ * valid (stale segment register values in particular). With the
+ * hardware task-switch, there is no way to fix up bad state in
+ * a reasonable manner.
+ *
+ * The fact that Intel documents the hardware task-switching to
+ * be slow is a fairly red herring - this code is not noticeably
+ * faster. However, there _is_ some room for improvement here,
+ * so the performance issues may eventually be a valid point.
+ * More important, however, is the fact that this allows us much
+ * more flexibility.
+ *
+ * The return value (in %ax) will be the "prev" task after
+ * the task-switch, and shows up in ret_from_fork in entry.S,
+ * for example.
+ */
+__visible __notrace_funcgraph struct task_struct *
+__switch_to(struct task_struct *prev_p, struct task_struct *next_p)
+{
+	struct thread_struct *prev = &prev_p->thread,
+			     *next = &next_p->thread;
+	struct fpu *prev_fpu = &prev->fpu;
+	int cpu = smp_processor_id();
+
+	/* never put a printk in __switch_to... printk() calls wake_up*() indirectly */
+
+	if (!test_thread_flag(TIF_NEED_FPU_LOAD))
+		switch_fpu_prepare(prev_fpu, cpu);
+
+	/*
+	 * Save away %gs. No need to save %fs, as it was saved on the
+	 * stack on entry.  No need to save %es and %ds, as those are
+	 * always kernel segments while inside the kernel.  Doing this
+	 * before setting the new TLS descriptors avoids the situation
+	 * where we temporarily have non-reloadable segments in %fs
+	 * and %gs.  This could be an issue if the NMI handler ever
+	 * used %fs or %gs (it does not today), or if the kernel is
+	 * running inside of a hypervisor layer.
+	 */
+	savesegment(gs, prev->gs);
+
+	/*
+	 * Load the per-thread Thread-Local Storage descriptor.
+	 */
+	load_TLS(next, cpu);
+
+	switch_to_extra(prev_p, next_p);
+
+	/*
+	 * Leave lazy mode, flushing any hypercalls made here.
+	 * This must be done before restoring TLS segments so
+	 * the GDT and LDT are properly updated.
+	 */
+	arch_end_context_switch(next_p);
+
+	/*
+	 * Reload esp0 and cpu_current_top_of_stack.  This changes
+	 * current_thread_info().  Refresh the SYSENTER configuration in
+	 * case prev or next is vm86.
+	 */
+	update_task_stack(next_p);
+	refresh_sysenter_cs(next);
+	this_cpu_write(cpu_current_top_of_stack,
+		       (unsigned long)task_stack_page(next_p) +
+		       THREAD_SIZE);
+
+	/*
+	 * Restore %gs if needed (which is common)
+	 */
+	if (prev->gs | next->gs)
+		loadsegment(gs, next->gs);
+
+	this_cpu_write(current_task, next_p);
+
+	switch_fpu_finish();
+
+	/* Load the Intel cache allocation PQR MSR. */
+	resctrl_sched_in(next_p);
+
+	return prev_p;
+}
+
+SYSCALL_DEFINE2(arch_prctl, int, option, unsigned long, arg2)
+{
+	return do_arch_prctl_common(option, arg2);
+}