Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 400 insertions, 0 deletions

diff --git a/drivers/acpi/acpica/exfield.c b/drivers/acpi/acpica/exfield.c
new file mode 100644
index 000000000..2b89a496d
--- /dev/null
+++ b/drivers/acpi/acpica/exfield.c
@@ -0,0 +1,400 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+/******************************************************************************
+ *
+ * Module Name: exfield - AML execution - field_unit read/write
+ *
+ * Copyright (C) 2000 - 2022, Intel Corp.
+ *
+ *****************************************************************************/
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acdispat.h"
+#include "acinterp.h"
+#include "amlcode.h"
+
+#define _COMPONENT          ACPI_EXECUTER
+ACPI_MODULE_NAME("exfield")
+
+/*
+ * This table maps the various Attrib protocols to the byte transfer
+ * length. Used for the generic serial bus.
+ */
+#define ACPI_INVALID_PROTOCOL_ID        0x80
+#define ACPI_MAX_PROTOCOL_ID            0x0F
+static const u8 acpi_protocol_lengths[] = {
+	ACPI_INVALID_PROTOCOL_ID,	/* 0 - reserved */
+	ACPI_INVALID_PROTOCOL_ID,	/* 1 - reserved */
+	0x00,			/* 2 - ATTRIB_QUICK */
+	ACPI_INVALID_PROTOCOL_ID,	/* 3 - reserved */
+	0x01,			/* 4 - ATTRIB_SEND_RECEIVE */
+	ACPI_INVALID_PROTOCOL_ID,	/* 5 - reserved */
+	0x01,			/* 6 - ATTRIB_BYTE */
+	ACPI_INVALID_PROTOCOL_ID,	/* 7 - reserved */
+	0x02,			/* 8 - ATTRIB_WORD */
+	ACPI_INVALID_PROTOCOL_ID,	/* 9 - reserved */
+	0xFF,			/* A - ATTRIB_BLOCK  */
+	0xFF,			/* B - ATTRIB_BYTES */
+	0x02,			/* C - ATTRIB_PROCESS_CALL */
+	0xFF,			/* D - ATTRIB_BLOCK_PROCESS_CALL */
+	0xFF,			/* E - ATTRIB_RAW_BYTES */
+	0xFF			/* F - ATTRIB_RAW_PROCESS_BYTES */
+};
+
+#define PCC_MASTER_SUBSPACE     3
+
+/*
+ * The following macros determine a given offset is a COMD field.
+ * According to the specification, generic subspaces (types 0-2) contains a
+ * 2-byte COMD field at offset 4 and master subspaces (type 3) contains a 4-byte
+ * COMD field starting at offset 12.
+ */
+#define GENERIC_SUBSPACE_COMMAND(a)     (4 == a || a == 5)
+#define MASTER_SUBSPACE_COMMAND(a)      (12 <= a && a <= 15)
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_get_protocol_buffer_length
+ *
+ * PARAMETERS:  protocol_id     - The type of the protocol indicated by region
+ *                                field access attributes
+ *              return_length   - Where the protocol byte transfer length is
+ *                                returned
+ *
+ * RETURN:      Status and decoded byte transfer length
+ *
+ * DESCRIPTION: This routine returns the length of the generic_serial_bus
+ *              protocol bytes
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_get_protocol_buffer_length(u32 protocol_id, u32 *return_length)
+{
+
+	if ((protocol_id > ACPI_MAX_PROTOCOL_ID) ||
+	    (acpi_protocol_lengths[protocol_id] == ACPI_INVALID_PROTOCOL_ID)) {
+		ACPI_ERROR((AE_INFO,
+			    "Invalid Field/AccessAs protocol ID: 0x%4.4X",
+			    protocol_id));
+
+		return (AE_AML_PROTOCOL);
+	}
+
+	*return_length = acpi_protocol_lengths[protocol_id];
+	return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_read_data_from_field
+ *
+ * PARAMETERS:  walk_state          - Current execution state
+ *              obj_desc            - The named field
+ *              ret_buffer_desc     - Where the return data object is stored
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Read from a named field. Returns either an Integer or a
+ *              Buffer, depending on the size of the field and whether if a
+ *              field is created by the create_field() operator.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_read_data_from_field(struct acpi_walk_state *walk_state,
+			     union acpi_operand_object *obj_desc,
+			     union acpi_operand_object **ret_buffer_desc)
+{
+	acpi_status status;
+	union acpi_operand_object *buffer_desc;
+	void *buffer;
+	u32 buffer_length;
+
+	ACPI_FUNCTION_TRACE_PTR(ex_read_data_from_field, obj_desc);
+
+	/* Parameter validation */
+
+	if (!obj_desc) {
+		return_ACPI_STATUS(AE_AML_NO_OPERAND);
+	}
+	if (!ret_buffer_desc) {
+		return_ACPI_STATUS(AE_BAD_PARAMETER);
+	}
+
+	if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) {
+		/*
+		 * If the buffer_field arguments have not been previously evaluated,
+		 * evaluate them now and save the results.
+		 */
+		if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) {
+			status = acpi_ds_get_buffer_field_arguments(obj_desc);
+			if (ACPI_FAILURE(status)) {
+				return_ACPI_STATUS(status);
+			}
+		}
+	} else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
+		   (obj_desc->field.region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_SMBUS
+		    || obj_desc->field.region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_GSBUS
+		    || obj_desc->field.region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_IPMI
+		    || obj_desc->field.region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_PLATFORM_RT)) {
+
+		/* SMBus, GSBus, IPMI serial */
+
+		status = acpi_ex_read_serial_bus(obj_desc, ret_buffer_desc);
+		return_ACPI_STATUS(status);
+	}
+
+	/*
+	 * Allocate a buffer for the contents of the field.
+	 *
+	 * If the field is larger than the current integer width, create
+	 * a BUFFER to hold it. Otherwise, use an INTEGER. This allows
+	 * the use of arithmetic operators on the returned value if the
+	 * field size is equal or smaller than an Integer.
+	 *
+	 * However, all buffer fields created by create_field operator needs to
+	 * remain as a buffer to match other AML interpreter implementations.
+	 *
+	 * Note: Field.length is in bits.
+	 */
+	buffer_length =
+	    (acpi_size)ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->field.bit_length);
+
+	if (buffer_length > acpi_gbl_integer_byte_width ||
+	    (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD &&
+	     obj_desc->buffer_field.is_create_field)) {
+
+		/* Field is too large for an Integer, create a Buffer instead */
+
+		buffer_desc = acpi_ut_create_buffer_object(buffer_length);
+		if (!buffer_desc) {
+			return_ACPI_STATUS(AE_NO_MEMORY);
+		}
+		buffer = buffer_desc->buffer.pointer;
+	} else {
+		/* Field will fit within an Integer (normal case) */
+
+		buffer_desc = acpi_ut_create_integer_object((u64) 0);
+		if (!buffer_desc) {
+			return_ACPI_STATUS(AE_NO_MEMORY);
+		}
+
+		buffer_length = acpi_gbl_integer_byte_width;
+		buffer = &buffer_desc->integer.value;
+	}
+
+	if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
+	    (obj_desc->field.region_obj->region.space_id ==
+	     ACPI_ADR_SPACE_GPIO)) {
+
+		/* General Purpose I/O */
+
+		status = acpi_ex_read_gpio(obj_desc, buffer);
+		goto exit;
+	} else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
+		   (obj_desc->field.region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_PLATFORM_COMM)) {
+		/*
+		 * Reading from a PCC field unit does not require the handler because
+		 * it only requires reading from the internal_pcc_buffer.
+		 */
+		ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+				  "PCC FieldRead bits %u\n",
+				  obj_desc->field.bit_length));
+
+		memcpy(buffer,
+		       obj_desc->field.region_obj->field.internal_pcc_buffer +
+		       obj_desc->field.base_byte_offset,
+		       (acpi_size)ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->field.
+							      bit_length));
+
+		*ret_buffer_desc = buffer_desc;
+		return AE_OK;
+	}
+
+	ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+			  "FieldRead [TO]:   Obj %p, Type %X, Buf %p, ByteLen %X\n",
+			  obj_desc, obj_desc->common.type, buffer,
+			  buffer_length));
+	ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+			  "FieldRead [FROM]: BitLen %X, BitOff %X, ByteOff %X\n",
+			  obj_desc->common_field.bit_length,
+			  obj_desc->common_field.start_field_bit_offset,
+			  obj_desc->common_field.base_byte_offset));
+
+	/* Lock entire transaction if requested */
+
+	acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
+
+	/* Read from the field */
+
+	status = acpi_ex_extract_from_field(obj_desc, buffer, buffer_length);
+	acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
+
+exit:
+	if (ACPI_FAILURE(status)) {
+		acpi_ut_remove_reference(buffer_desc);
+	} else {
+		*ret_buffer_desc = buffer_desc;
+	}
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_write_data_to_field
+ *
+ * PARAMETERS:  source_desc         - Contains data to write
+ *              obj_desc            - The named field
+ *              result_desc         - Where the return value is returned, if any
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Write to a named field
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_write_data_to_field(union acpi_operand_object *source_desc,
+			    union acpi_operand_object *obj_desc,
+			    union acpi_operand_object **result_desc)
+{
+	acpi_status status;
+	u32 buffer_length;
+	u32 data_length;
+	void *buffer;
+
+	ACPI_FUNCTION_TRACE_PTR(ex_write_data_to_field, obj_desc);
+
+	/* Parameter validation */
+
+	if (!source_desc || !obj_desc) {
+		return_ACPI_STATUS(AE_AML_NO_OPERAND);
+	}
+
+	if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) {
+		/*
+		 * If the buffer_field arguments have not been previously evaluated,
+		 * evaluate them now and save the results.
+		 */
+		if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) {
+			status = acpi_ds_get_buffer_field_arguments(obj_desc);
+			if (ACPI_FAILURE(status)) {
+				return_ACPI_STATUS(status);
+			}
+		}
+	} else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
+		   (obj_desc->field.region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_GPIO)) {
+
+		/* General Purpose I/O */
+
+		status = acpi_ex_write_gpio(source_desc, obj_desc, result_desc);
+		return_ACPI_STATUS(status);
+	} else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
+		   (obj_desc->field.region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_SMBUS
+		    || obj_desc->field.region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_GSBUS
+		    || obj_desc->field.region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_IPMI
+		    || obj_desc->field.region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_PLATFORM_RT)) {
+
+		/* SMBus, GSBus, IPMI serial */
+
+		status =
+		    acpi_ex_write_serial_bus(source_desc, obj_desc,
+					     result_desc);
+		return_ACPI_STATUS(status);
+	} else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
+		   (obj_desc->field.region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_PLATFORM_COMM)) {
+		/*
+		 * According to the spec a write to the COMD field will invoke the
+		 * region handler. Otherwise, write to the pcc_internal buffer. This
+		 * implementation will use the offsets specified rather than the name
+		 * of the field. This is considered safer because some firmware tools
+		 * are known to obfiscate named objects.
+		 */
+		data_length =
+		    (acpi_size)ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->field.
+							   bit_length);
+		memcpy(obj_desc->field.region_obj->field.internal_pcc_buffer +
+		       obj_desc->field.base_byte_offset,
+		       source_desc->buffer.pointer, data_length);
+
+		if (MASTER_SUBSPACE_COMMAND(obj_desc->field.base_byte_offset)) {
+
+			/* Perform the write */
+
+			ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+					  "PCC COMD field has been written. Invoking PCC handler now.\n"));
+
+			status =
+			    acpi_ex_access_region(obj_desc, 0,
+						  (u64 *)obj_desc->field.
+						  region_obj->field.
+						  internal_pcc_buffer,
+						  ACPI_WRITE);
+			return_ACPI_STATUS(status);
+		}
+		return (AE_OK);
+	}
+
+	/* Get a pointer to the data to be written */
+
+	switch (source_desc->common.type) {
+	case ACPI_TYPE_INTEGER:
+
+		buffer = &source_desc->integer.value;
+		buffer_length = sizeof(source_desc->integer.value);
+		break;
+
+	case ACPI_TYPE_BUFFER:
+
+		buffer = source_desc->buffer.pointer;
+		buffer_length = source_desc->buffer.length;
+		break;
+
+	case ACPI_TYPE_STRING:
+
+		buffer = source_desc->string.pointer;
+		buffer_length = source_desc->string.length;
+		break;
+
+	default:
+		return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+	}
+
+	ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+			  "FieldWrite [FROM]: Obj %p (%s:%X), Buf %p, ByteLen %X\n",
+			  source_desc,
+			  acpi_ut_get_type_name(source_desc->common.type),
+			  source_desc->common.type, buffer, buffer_length));
+
+	ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+			  "FieldWrite [TO]:   Obj %p (%s:%X), BitLen %X, BitOff %X, ByteOff %X\n",
+			  obj_desc,
+			  acpi_ut_get_type_name(obj_desc->common.type),
+			  obj_desc->common.type,
+			  obj_desc->common_field.bit_length,
+			  obj_desc->common_field.start_field_bit_offset,
+			  obj_desc->common_field.base_byte_offset));
+
+	/* Lock entire transaction if requested */
+
+	acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
+
+	/* Write to the field */
+
+	status = acpi_ex_insert_into_field(obj_desc, buffer, buffer_length);
+	acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
+	return_ACPI_STATUS(status);
+}