Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

10 files changed, 1065 insertions, 0 deletions

diff --git a/drivers/clk/mxs/Makefile b/drivers/clk/mxs/Makefile
new file mode 100644
index 000000000..15a112fde
--- /dev/null
+++ b/drivers/clk/mxs/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for mxs specific clk
+#
+
+obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o clk-ssp.o
+
+obj-$(CONFIG_SOC_IMX23) += clk-imx23.o
+obj-$(CONFIG_SOC_IMX28) += clk-imx28.o
diff --git a/drivers/clk/mxs/clk-div.c b/drivers/clk/mxs/clk-div.c
new file mode 100644
index 000000000..928e8b1c4
--- /dev/null
+++ b/drivers/clk/mxs/clk-div.c
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+/**
+ * struct clk_div - mxs integer divider clock
+ * @divider: the parent class
+ * @ops: pointer to clk_ops of parent class
+ * @reg: register address
+ * @busy: busy bit shift
+ *
+ * The mxs divider clock is a subclass of basic clk_divider with an
+ * addtional busy bit.
+ */
+struct clk_div {
+	struct clk_divider divider;
+	const struct clk_ops *ops;
+	void __iomem *reg;
+	u8 busy;
+};
+
+static inline struct clk_div *to_clk_div(struct clk_hw *hw)
+{
+	struct clk_divider *divider = to_clk_divider(hw);
+
+	return container_of(divider, struct clk_div, divider);
+}
+
+static unsigned long clk_div_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct clk_div *div = to_clk_div(hw);
+
+	return div->ops->recalc_rate(&div->divider.hw, parent_rate);
+}
+
+static long clk_div_round_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *prate)
+{
+	struct clk_div *div = to_clk_div(hw);
+
+	return div->ops->round_rate(&div->divider.hw, rate, prate);
+}
+
+static int clk_div_set_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	struct clk_div *div = to_clk_div(hw);
+	int ret;
+
+	ret = div->ops->set_rate(&div->divider.hw, rate, parent_rate);
+	if (!ret)
+		ret = mxs_clk_wait(div->reg, div->busy);
+
+	return ret;
+}
+
+static const struct clk_ops clk_div_ops = {
+	.recalc_rate = clk_div_recalc_rate,
+	.round_rate = clk_div_round_rate,
+	.set_rate = clk_div_set_rate,
+};
+
+struct clk *mxs_clk_div(const char *name, const char *parent_name,
+			void __iomem *reg, u8 shift, u8 width, u8 busy)
+{
+	struct clk_div *div;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	div = kzalloc(sizeof(*div), GFP_KERNEL);
+	if (!div)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_div_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	init.parent_names = (parent_name ? &parent_name: NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
+	div->reg = reg;
+	div->busy = busy;
+
+	div->divider.reg = reg;
+	div->divider.shift = shift;
+	div->divider.width = width;
+	div->divider.flags = CLK_DIVIDER_ONE_BASED;
+	div->divider.lock = &mxs_lock;
+	div->divider.hw.init = &init;
+	div->ops = &clk_divider_ops;
+
+	clk = clk_register(NULL, &div->divider.hw);
+	if (IS_ERR(clk))
+		kfree(div);
+
+	return clk;
+}
diff --git a/drivers/clk/mxs/clk-frac.c b/drivers/clk/mxs/clk-frac.c
new file mode 100644
index 000000000..bba0d840d
--- /dev/null
+++ b/drivers/clk/mxs/clk-frac.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+/**
+ * struct clk_frac - mxs fractional divider clock
+ * @hw: clk_hw for the fractional divider clock
+ * @reg: register address
+ * @shift: the divider bit shift
+ * @width: the divider bit width
+ * @busy: busy bit shift
+ *
+ * The clock is an adjustable fractional divider with a busy bit to wait
+ * when the divider is adjusted.
+ */
+struct clk_frac {
+	struct clk_hw hw;
+	void __iomem *reg;
+	u8 shift;
+	u8 width;
+	u8 busy;
+};
+
+#define to_clk_frac(_hw) container_of(_hw, struct clk_frac, hw)
+
+static unsigned long clk_frac_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	struct clk_frac *frac = to_clk_frac(hw);
+	u32 div;
+	u64 tmp_rate;
+
+	div = readl_relaxed(frac->reg) >> frac->shift;
+	div &= (1 << frac->width) - 1;
+
+	tmp_rate = (u64)parent_rate * div;
+	return tmp_rate >> frac->width;
+}
+
+static long clk_frac_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	struct clk_frac *frac = to_clk_frac(hw);
+	unsigned long parent_rate = *prate;
+	u32 div;
+	u64 tmp, tmp_rate, result;
+
+	if (rate > parent_rate)
+		return -EINVAL;
+
+	tmp = rate;
+	tmp <<= frac->width;
+	do_div(tmp, parent_rate);
+	div = tmp;
+
+	if (!div)
+		return -EINVAL;
+
+	tmp_rate = (u64)parent_rate * div;
+	result = tmp_rate >> frac->width;
+	if ((result << frac->width) < tmp_rate)
+		result += 1;
+	return result;
+}
+
+static int clk_frac_set_rate(struct clk_hw *hw, unsigned long rate,
+			     unsigned long parent_rate)
+{
+	struct clk_frac *frac = to_clk_frac(hw);
+	unsigned long flags;
+	u32 div, val;
+	u64 tmp;
+
+	if (rate > parent_rate)
+		return -EINVAL;
+
+	tmp = rate;
+	tmp <<= frac->width;
+	do_div(tmp, parent_rate);
+	div = tmp;
+
+	if (!div)
+		return -EINVAL;
+
+	spin_lock_irqsave(&mxs_lock, flags);
+
+	val = readl_relaxed(frac->reg);
+	val &= ~(((1 << frac->width) - 1) << frac->shift);
+	val |= div << frac->shift;
+	writel_relaxed(val, frac->reg);
+
+	spin_unlock_irqrestore(&mxs_lock, flags);
+
+	return mxs_clk_wait(frac->reg, frac->busy);
+}
+
+static const struct clk_ops clk_frac_ops = {
+	.recalc_rate = clk_frac_recalc_rate,
+	.round_rate = clk_frac_round_rate,
+	.set_rate = clk_frac_set_rate,
+};
+
+struct clk *mxs_clk_frac(const char *name, const char *parent_name,
+			 void __iomem *reg, u8 shift, u8 width, u8 busy)
+{
+	struct clk_frac *frac;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	frac = kzalloc(sizeof(*frac), GFP_KERNEL);
+	if (!frac)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_frac_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	init.parent_names = (parent_name ? &parent_name: NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
+	frac->reg = reg;
+	frac->shift = shift;
+	frac->width = width;
+	frac->busy = busy;
+	frac->hw.init = &init;
+
+	clk = clk_register(NULL, &frac->hw);
+	if (IS_ERR(clk))
+		kfree(frac);
+
+	return clk;
+}
diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c
new file mode 100644
index 000000000..8affada39
--- /dev/null
+++ b/drivers/clk/mxs/clk-imx23.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/clk/mxs.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include "clk.h"
+
+static void __iomem *clkctrl;
+static void __iomem *digctrl;
+
+#define CLKCTRL clkctrl
+#define DIGCTRL digctrl
+
+#define PLLCTRL0		(CLKCTRL + 0x0000)
+#define CPU			(CLKCTRL + 0x0020)
+#define HBUS			(CLKCTRL + 0x0030)
+#define XBUS			(CLKCTRL + 0x0040)
+#define XTAL			(CLKCTRL + 0x0050)
+#define PIX			(CLKCTRL + 0x0060)
+#define SSP			(CLKCTRL + 0x0070)
+#define GPMI			(CLKCTRL + 0x0080)
+#define SPDIF			(CLKCTRL + 0x0090)
+#define EMI			(CLKCTRL + 0x00a0)
+#define SAIF			(CLKCTRL + 0x00c0)
+#define TV			(CLKCTRL + 0x00d0)
+#define ETM			(CLKCTRL + 0x00e0)
+#define FRAC			(CLKCTRL + 0x00f0)
+#define CLKSEQ			(CLKCTRL + 0x0110)
+
+#define BP_CPU_INTERRUPT_WAIT	12
+#define BP_CLKSEQ_BYPASS_SAIF	0
+#define BP_CLKSEQ_BYPASS_SSP	5
+#define BP_SAIF_DIV_FRAC_EN	16
+#define BP_FRAC_IOFRAC		24
+
+static void __init clk_misc_init(void)
+{
+	u32 val;
+
+	/* Gate off cpu clock in WFI for power saving */
+	writel_relaxed(1 << BP_CPU_INTERRUPT_WAIT, CPU + SET);
+
+	/* Clear BYPASS for SAIF */
+	writel_relaxed(1 << BP_CLKSEQ_BYPASS_SAIF, CLKSEQ + CLR);
+
+	/* SAIF has to use frac div for functional operation */
+	val = readl_relaxed(SAIF);
+	val |= 1 << BP_SAIF_DIV_FRAC_EN;
+	writel_relaxed(val, SAIF);
+
+	/*
+	 * Source ssp clock from ref_io than ref_xtal,
+	 * as ref_xtal only provides 24 MHz as maximum.
+	 */
+	writel_relaxed(1 << BP_CLKSEQ_BYPASS_SSP, CLKSEQ + CLR);
+
+	/*
+	 * 480 MHz seems too high to be ssp clock source directly,
+	 * so set frac to get a 288 MHz ref_io.
+	 */
+	writel_relaxed(0x3f << BP_FRAC_IOFRAC, FRAC + CLR);
+	writel_relaxed(30 << BP_FRAC_IOFRAC, FRAC + SET);
+}
+
+static const char *const sel_pll[]  __initconst = { "pll", "ref_xtal", };
+static const char *const sel_cpu[]  __initconst = { "ref_cpu", "ref_xtal", };
+static const char *const sel_pix[]  __initconst = { "ref_pix", "ref_xtal", };
+static const char *const sel_io[]   __initconst = { "ref_io", "ref_xtal", };
+static const char *const cpu_sels[] __initconst = { "cpu_pll", "cpu_xtal", };
+static const char *const emi_sels[] __initconst = { "emi_pll", "emi_xtal", };
+
+enum imx23_clk {
+	ref_xtal, pll, ref_cpu, ref_emi, ref_pix, ref_io, saif_sel,
+	lcdif_sel, gpmi_sel, ssp_sel, emi_sel, cpu, etm_sel, cpu_pll,
+	cpu_xtal, hbus, xbus, lcdif_div, ssp_div, gpmi_div, emi_pll,
+	emi_xtal, etm_div, saif_div, clk32k_div, rtc, adc, spdif_div,
+	clk32k, dri, pwm, filt, uart, ssp, gpmi, spdif, emi, saif,
+	lcdif, etm, usb, usb_phy,
+	clk_max
+};
+
+static struct clk *clks[clk_max];
+static struct clk_onecell_data clk_data;
+
+static enum imx23_clk clks_init_on[] __initdata = {
+	cpu, hbus, xbus, emi, uart,
+};
+
+static void __init mx23_clocks_init(struct device_node *np)
+{
+	struct device_node *dcnp;
+	u32 i;
+
+	dcnp = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl");
+	digctrl = of_iomap(dcnp, 0);
+	WARN_ON(!digctrl);
+	of_node_put(dcnp);
+
+	clkctrl = of_iomap(np, 0);
+	WARN_ON(!clkctrl);
+
+	clk_misc_init();
+
+	clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000);
+	clks[pll] = mxs_clk_pll("pll", "ref_xtal", PLLCTRL0, 16, 480000000);
+	clks[ref_cpu] = mxs_clk_ref("ref_cpu", "pll", FRAC, 0);
+	clks[ref_emi] = mxs_clk_ref("ref_emi", "pll", FRAC, 1);
+	clks[ref_pix] = mxs_clk_ref("ref_pix", "pll", FRAC, 2);
+	clks[ref_io] = mxs_clk_ref("ref_io", "pll", FRAC, 3);
+	clks[saif_sel] = mxs_clk_mux("saif_sel", CLKSEQ, 0, 1, sel_pll, ARRAY_SIZE(sel_pll));
+	clks[lcdif_sel] = mxs_clk_mux("lcdif_sel", CLKSEQ, 1, 1, sel_pix, ARRAY_SIZE(sel_pix));
+	clks[gpmi_sel] = mxs_clk_mux("gpmi_sel", CLKSEQ, 4, 1, sel_io, ARRAY_SIZE(sel_io));
+	clks[ssp_sel] = mxs_clk_mux("ssp_sel", CLKSEQ, 5, 1, sel_io, ARRAY_SIZE(sel_io));
+	clks[emi_sel] = mxs_clk_mux("emi_sel", CLKSEQ, 6, 1, emi_sels, ARRAY_SIZE(emi_sels));
+	clks[cpu] = mxs_clk_mux("cpu", CLKSEQ, 7, 1, cpu_sels, ARRAY_SIZE(cpu_sels));
+	clks[etm_sel] = mxs_clk_mux("etm_sel", CLKSEQ, 8, 1, sel_cpu, ARRAY_SIZE(sel_cpu));
+	clks[cpu_pll] = mxs_clk_div("cpu_pll", "ref_cpu", CPU, 0, 6, 28);
+	clks[cpu_xtal] = mxs_clk_div("cpu_xtal", "ref_xtal", CPU, 16, 10, 29);
+	clks[hbus] = mxs_clk_div("hbus", "cpu", HBUS, 0, 5, 29);
+	clks[xbus] = mxs_clk_div("xbus", "ref_xtal", XBUS, 0, 10, 31);
+	clks[lcdif_div] = mxs_clk_div("lcdif_div", "lcdif_sel", PIX, 0, 12, 29);
+	clks[ssp_div] = mxs_clk_div("ssp_div", "ssp_sel", SSP, 0, 9, 29);
+	clks[gpmi_div] = mxs_clk_div("gpmi_div", "gpmi_sel", GPMI, 0, 10, 29);
+	clks[emi_pll] = mxs_clk_div("emi_pll", "ref_emi", EMI, 0, 6, 28);
+	clks[emi_xtal] = mxs_clk_div("emi_xtal", "ref_xtal", EMI, 8, 4, 29);
+	clks[etm_div] = mxs_clk_div("etm_div", "etm_sel", ETM, 0, 6, 29);
+	clks[saif_div] = mxs_clk_frac("saif_div", "saif_sel", SAIF, 0, 16, 29);
+	clks[clk32k_div] = mxs_clk_fixed_factor("clk32k_div", "ref_xtal", 1, 750);
+	clks[rtc] = mxs_clk_fixed_factor("rtc", "ref_xtal", 1, 768);
+	clks[adc] = mxs_clk_fixed_factor("adc", "clk32k", 1, 16);
+	clks[spdif_div] = mxs_clk_fixed_factor("spdif_div", "pll", 1, 4);
+	clks[clk32k] = mxs_clk_gate("clk32k", "clk32k_div", XTAL, 26);
+	clks[dri] = mxs_clk_gate("dri", "ref_xtal", XTAL, 28);
+	clks[pwm] = mxs_clk_gate("pwm", "ref_xtal", XTAL, 29);
+	clks[filt] = mxs_clk_gate("filt", "ref_xtal", XTAL, 30);
+	clks[uart] = mxs_clk_gate("uart", "ref_xtal", XTAL, 31);
+	clks[ssp] = mxs_clk_gate("ssp", "ssp_div", SSP, 31);
+	clks[gpmi] = mxs_clk_gate("gpmi", "gpmi_div", GPMI, 31);
+	clks[spdif] = mxs_clk_gate("spdif", "spdif_div", SPDIF, 31);
+	clks[emi] = mxs_clk_gate("emi", "emi_sel", EMI, 31);
+	clks[saif] = mxs_clk_gate("saif", "saif_div", SAIF, 31);
+	clks[lcdif] = mxs_clk_gate("lcdif", "lcdif_div", PIX, 31);
+	clks[etm] = mxs_clk_gate("etm", "etm_div", ETM, 31);
+	clks[usb] = mxs_clk_gate("usb", "usb_phy", DIGCTRL, 2);
+	clks[usb_phy] = clk_register_gate(NULL, "usb_phy", "pll", 0, PLLCTRL0, 18, 0, &mxs_lock);
+
+	for (i = 0; i < ARRAY_SIZE(clks); i++)
+		if (IS_ERR(clks[i])) {
+			pr_err("i.MX23 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clks[i]));
+			return;
+		}
+
+	clk_data.clks = clks;
+	clk_data.clk_num = ARRAY_SIZE(clks);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+		clk_prepare_enable(clks[clks_init_on[i]]);
+
+}
+CLK_OF_DECLARE(imx23_clkctrl, "fsl,imx23-clkctrl", mx23_clocks_init);
diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
new file mode 100644
index 000000000..62146ea4d
--- /dev/null
+++ b/drivers/clk/mxs/clk-imx28.c
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/clk/mxs.h>
+#include <linux/clkdev.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include "clk.h"
+
+static void __iomem *clkctrl;
+#define CLKCTRL clkctrl
+
+#define PLL0CTRL0		(CLKCTRL + 0x0000)
+#define PLL1CTRL0		(CLKCTRL + 0x0020)
+#define PLL2CTRL0		(CLKCTRL + 0x0040)
+#define CPU			(CLKCTRL + 0x0050)
+#define HBUS			(CLKCTRL + 0x0060)
+#define XBUS			(CLKCTRL + 0x0070)
+#define XTAL			(CLKCTRL + 0x0080)
+#define SSP0			(CLKCTRL + 0x0090)
+#define SSP1			(CLKCTRL + 0x00a0)
+#define SSP2			(CLKCTRL + 0x00b0)
+#define SSP3			(CLKCTRL + 0x00c0)
+#define GPMI			(CLKCTRL + 0x00d0)
+#define SPDIF			(CLKCTRL + 0x00e0)
+#define EMI			(CLKCTRL + 0x00f0)
+#define SAIF0			(CLKCTRL + 0x0100)
+#define SAIF1			(CLKCTRL + 0x0110)
+#define LCDIF			(CLKCTRL + 0x0120)
+#define ETM			(CLKCTRL + 0x0130)
+#define ENET			(CLKCTRL + 0x0140)
+#define FLEXCAN			(CLKCTRL + 0x0160)
+#define FRAC0			(CLKCTRL + 0x01b0)
+#define FRAC1			(CLKCTRL + 0x01c0)
+#define CLKSEQ			(CLKCTRL + 0x01d0)
+
+#define BP_CPU_INTERRUPT_WAIT	12
+#define BP_SAIF_DIV_FRAC_EN	16
+#define BP_ENET_DIV_TIME	21
+#define BP_ENET_SLEEP		31
+#define BP_CLKSEQ_BYPASS_SAIF0	0
+#define BP_CLKSEQ_BYPASS_SSP0	3
+#define BP_FRAC0_IO1FRAC	16
+#define BP_FRAC0_IO0FRAC	24
+
+static void __iomem *digctrl;
+#define DIGCTRL digctrl
+#define BP_SAIF_CLKMUX		10
+
+/*
+ * HW_SAIF_CLKMUX_SEL:
+ *  DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks, and SAIF1
+ *		clock pins selected for SAIF1 input clocks.
+ *  CROSSINPUT(0x1): SAIF1 clock inputs selected for SAIF0 input clocks, and
+ *		SAIF0 clock inputs selected for SAIF1 input clocks.
+ *  EXTMSTR0(0x2): SAIF0 clock pin selected for both SAIF0 and SAIF1 input
+ *		clocks.
+ *  EXTMSTR1(0x3): SAIF1 clock pin selected for both SAIF0 and SAIF1 input
+ *		clocks.
+ */
+int mxs_saif_clkmux_select(unsigned int clkmux)
+{
+	if (clkmux > 0x3)
+		return -EINVAL;
+
+	writel_relaxed(0x3 << BP_SAIF_CLKMUX, DIGCTRL + CLR);
+	writel_relaxed(clkmux << BP_SAIF_CLKMUX, DIGCTRL + SET);
+
+	return 0;
+}
+
+static void __init clk_misc_init(void)
+{
+	u32 val;
+
+	/* Gate off cpu clock in WFI for power saving */
+	writel_relaxed(1 << BP_CPU_INTERRUPT_WAIT, CPU + SET);
+
+	/* 0 is a bad default value for a divider */
+	writel_relaxed(1 << BP_ENET_DIV_TIME, ENET + SET);
+
+	/* Clear BYPASS for SAIF */
+	writel_relaxed(0x3 << BP_CLKSEQ_BYPASS_SAIF0, CLKSEQ + CLR);
+
+	/* SAIF has to use frac div for functional operation */
+	val = readl_relaxed(SAIF0);
+	val |= 1 << BP_SAIF_DIV_FRAC_EN;
+	writel_relaxed(val, SAIF0);
+
+	val = readl_relaxed(SAIF1);
+	val |= 1 << BP_SAIF_DIV_FRAC_EN;
+	writel_relaxed(val, SAIF1);
+
+	/* Extra fec clock setting */
+	val = readl_relaxed(ENET);
+	val &= ~(1 << BP_ENET_SLEEP);
+	writel_relaxed(val, ENET);
+
+	/*
+	 * Source ssp clock from ref_io than ref_xtal,
+	 * as ref_xtal only provides 24 MHz as maximum.
+	 */
+	writel_relaxed(0xf << BP_CLKSEQ_BYPASS_SSP0, CLKSEQ + CLR);
+
+	/*
+	 * 480 MHz seems too high to be ssp clock source directly,
+	 * so set frac0 to get a 288 MHz ref_io0 and ref_io1.
+	 */
+	val = readl_relaxed(FRAC0);
+	val &= ~((0x3f << BP_FRAC0_IO0FRAC) | (0x3f << BP_FRAC0_IO1FRAC));
+	val |= (30 << BP_FRAC0_IO0FRAC) | (30 << BP_FRAC0_IO1FRAC);
+	writel_relaxed(val, FRAC0);
+}
+
+static const char *const sel_cpu[]  __initconst = { "ref_cpu", "ref_xtal", };
+static const char *const sel_io0[]  __initconst = { "ref_io0", "ref_xtal", };
+static const char *const sel_io1[]  __initconst = { "ref_io1", "ref_xtal", };
+static const char *const sel_pix[]  __initconst = { "ref_pix", "ref_xtal", };
+static const char *const sel_gpmi[] __initconst = { "ref_gpmi", "ref_xtal", };
+static const char *const sel_pll0[] __initconst = { "pll0", "ref_xtal", };
+static const char *const cpu_sels[] __initconst = { "cpu_pll", "cpu_xtal", };
+static const char *const emi_sels[] __initconst = { "emi_pll", "emi_xtal", };
+static const char *const ptp_sels[] __initconst = { "ref_xtal", "pll0", };
+
+enum imx28_clk {
+	ref_xtal, pll0, pll1, pll2, ref_cpu, ref_emi, ref_io0, ref_io1,
+	ref_pix, ref_hsadc, ref_gpmi, saif0_sel, saif1_sel, gpmi_sel,
+	ssp0_sel, ssp1_sel, ssp2_sel, ssp3_sel, emi_sel, etm_sel,
+	lcdif_sel, cpu, ptp_sel, cpu_pll, cpu_xtal, hbus, xbus,
+	ssp0_div, ssp1_div, ssp2_div, ssp3_div, gpmi_div, emi_pll,
+	emi_xtal, lcdif_div, etm_div, ptp, saif0_div, saif1_div,
+	clk32k_div, rtc, lradc, spdif_div, clk32k, pwm, uart, ssp0,
+	ssp1, ssp2, ssp3, gpmi, spdif, emi, saif0, saif1, lcdif, etm,
+	fec, can0, can1, usb0, usb1, usb0_phy, usb1_phy, enet_out,
+	clk_max
+};
+
+static struct clk *clks[clk_max];
+static struct clk_onecell_data clk_data;
+
+static enum imx28_clk clks_init_on[] __initdata = {
+	cpu, hbus, xbus, emi, uart,
+};
+
+static void __init mx28_clocks_init(struct device_node *np)
+{
+	struct device_node *dcnp;
+	u32 i;
+
+	dcnp = of_find_compatible_node(NULL, NULL, "fsl,imx28-digctl");
+	digctrl = of_iomap(dcnp, 0);
+	WARN_ON(!digctrl);
+	of_node_put(dcnp);
+
+	clkctrl = of_iomap(np, 0);
+	WARN_ON(!clkctrl);
+
+	clk_misc_init();
+
+	clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000);
+	clks[pll0] = mxs_clk_pll("pll0", "ref_xtal", PLL0CTRL0, 17, 480000000);
+	clks[pll1] = mxs_clk_pll("pll1", "ref_xtal", PLL1CTRL0, 17, 480000000);
+	clks[pll2] = mxs_clk_pll("pll2", "ref_xtal", PLL2CTRL0, 23, 50000000);
+	clks[ref_cpu] = mxs_clk_ref("ref_cpu", "pll0", FRAC0, 0);
+	clks[ref_emi] = mxs_clk_ref("ref_emi", "pll0", FRAC0, 1);
+	clks[ref_io1] = mxs_clk_ref("ref_io1", "pll0", FRAC0, 2);
+	clks[ref_io0] = mxs_clk_ref("ref_io0", "pll0", FRAC0, 3);
+	clks[ref_pix] = mxs_clk_ref("ref_pix", "pll0", FRAC1, 0);
+	clks[ref_hsadc] = mxs_clk_ref("ref_hsadc", "pll0", FRAC1, 1);
+	clks[ref_gpmi] = mxs_clk_ref("ref_gpmi", "pll0", FRAC1, 2);
+	clks[saif0_sel] = mxs_clk_mux("saif0_sel", CLKSEQ, 0, 1, sel_pll0, ARRAY_SIZE(sel_pll0));
+	clks[saif1_sel] = mxs_clk_mux("saif1_sel", CLKSEQ, 1, 1, sel_pll0, ARRAY_SIZE(sel_pll0));
+	clks[gpmi_sel] = mxs_clk_mux("gpmi_sel", CLKSEQ, 2, 1, sel_gpmi, ARRAY_SIZE(sel_gpmi));
+	clks[ssp0_sel] = mxs_clk_mux("ssp0_sel", CLKSEQ, 3, 1, sel_io0, ARRAY_SIZE(sel_io0));
+	clks[ssp1_sel] = mxs_clk_mux("ssp1_sel", CLKSEQ, 4, 1, sel_io0, ARRAY_SIZE(sel_io0));
+	clks[ssp2_sel] = mxs_clk_mux("ssp2_sel", CLKSEQ, 5, 1, sel_io1, ARRAY_SIZE(sel_io1));
+	clks[ssp3_sel] = mxs_clk_mux("ssp3_sel", CLKSEQ, 6, 1, sel_io1, ARRAY_SIZE(sel_io1));
+	clks[emi_sel] = mxs_clk_mux("emi_sel", CLKSEQ, 7, 1, emi_sels, ARRAY_SIZE(emi_sels));
+	clks[etm_sel] = mxs_clk_mux("etm_sel", CLKSEQ, 8, 1, sel_cpu, ARRAY_SIZE(sel_cpu));
+	clks[lcdif_sel] = mxs_clk_mux("lcdif_sel", CLKSEQ, 14, 1, sel_pix, ARRAY_SIZE(sel_pix));
+	clks[cpu] = mxs_clk_mux("cpu", CLKSEQ, 18, 1, cpu_sels, ARRAY_SIZE(cpu_sels));
+	clks[ptp_sel] = mxs_clk_mux("ptp_sel", ENET, 19, 1, ptp_sels, ARRAY_SIZE(ptp_sels));
+	clks[cpu_pll] = mxs_clk_div("cpu_pll", "ref_cpu", CPU, 0, 6, 28);
+	clks[cpu_xtal] = mxs_clk_div("cpu_xtal", "ref_xtal", CPU, 16, 10, 29);
+	clks[hbus] = mxs_clk_div("hbus", "cpu", HBUS, 0, 5, 31);
+	clks[xbus] = mxs_clk_div("xbus", "ref_xtal", XBUS, 0, 10, 31);
+	clks[ssp0_div] = mxs_clk_div("ssp0_div", "ssp0_sel", SSP0, 0, 9, 29);
+	clks[ssp1_div] = mxs_clk_div("ssp1_div", "ssp1_sel", SSP1, 0, 9, 29);
+	clks[ssp2_div] = mxs_clk_div("ssp2_div", "ssp2_sel", SSP2, 0, 9, 29);
+	clks[ssp3_div] = mxs_clk_div("ssp3_div", "ssp3_sel", SSP3, 0, 9, 29);
+	clks[gpmi_div] = mxs_clk_div("gpmi_div", "gpmi_sel", GPMI, 0, 10, 29);
+	clks[emi_pll] = mxs_clk_div("emi_pll", "ref_emi", EMI, 0, 6, 28);
+	clks[emi_xtal] = mxs_clk_div("emi_xtal", "ref_xtal", EMI, 8, 4, 29);
+	clks[lcdif_div] = mxs_clk_div("lcdif_div", "lcdif_sel", LCDIF, 0, 13, 29);
+	clks[etm_div] = mxs_clk_div("etm_div", "etm_sel", ETM, 0, 7, 29);
+	clks[ptp] = mxs_clk_div("ptp", "ptp_sel", ENET, 21, 6, 27);
+	clks[saif0_div] = mxs_clk_frac("saif0_div", "saif0_sel", SAIF0, 0, 16, 29);
+	clks[saif1_div] = mxs_clk_frac("saif1_div", "saif1_sel", SAIF1, 0, 16, 29);
+	clks[clk32k_div] = mxs_clk_fixed_factor("clk32k_div", "ref_xtal", 1, 750);
+	clks[rtc] = mxs_clk_fixed_factor("rtc", "ref_xtal", 1, 768);
+	clks[lradc] = mxs_clk_fixed_factor("lradc", "clk32k", 1, 16);
+	clks[spdif_div] = mxs_clk_fixed_factor("spdif_div", "pll0", 1, 4);
+	clks[clk32k] = mxs_clk_gate("clk32k", "clk32k_div", XTAL, 26);
+	clks[pwm] = mxs_clk_gate("pwm", "ref_xtal", XTAL, 29);
+	clks[uart] = mxs_clk_gate("uart", "ref_xtal", XTAL, 31);
+	clks[ssp0] = mxs_clk_gate("ssp0", "ssp0_div", SSP0, 31);
+	clks[ssp1] = mxs_clk_gate("ssp1", "ssp1_div", SSP1, 31);
+	clks[ssp2] = mxs_clk_gate("ssp2", "ssp2_div", SSP2, 31);
+	clks[ssp3] = mxs_clk_gate("ssp3", "ssp3_div", SSP3, 31);
+	clks[gpmi] = mxs_clk_gate("gpmi", "gpmi_div", GPMI, 31);
+	clks[spdif] = mxs_clk_gate("spdif", "spdif_div", SPDIF, 31);
+	clks[emi] = mxs_clk_gate("emi", "emi_sel", EMI, 31);
+	clks[saif0] = mxs_clk_gate("saif0", "saif0_div", SAIF0, 31);
+	clks[saif1] = mxs_clk_gate("saif1", "saif1_div", SAIF1, 31);
+	clks[lcdif] = mxs_clk_gate("lcdif", "lcdif_div", LCDIF, 31);
+	clks[etm] = mxs_clk_gate("etm", "etm_div", ETM, 31);
+	clks[fec] = mxs_clk_gate("fec", "hbus", ENET, 30);
+	clks[can0] = mxs_clk_gate("can0", "ref_xtal", FLEXCAN, 30);
+	clks[can1] = mxs_clk_gate("can1", "ref_xtal", FLEXCAN, 28);
+	clks[usb0] = mxs_clk_gate("usb0", "usb0_phy", DIGCTRL, 2);
+	clks[usb1] = mxs_clk_gate("usb1", "usb1_phy", DIGCTRL, 16);
+	clks[usb0_phy] = clk_register_gate(NULL, "usb0_phy", "pll0", 0, PLL0CTRL0, 18, 0, &mxs_lock);
+	clks[usb1_phy] = clk_register_gate(NULL, "usb1_phy", "pll1", 0, PLL1CTRL0, 18, 0, &mxs_lock);
+	clks[enet_out] = clk_register_gate(NULL, "enet_out", "pll2", 0, ENET, 18, 0, &mxs_lock);
+
+	for (i = 0; i < ARRAY_SIZE(clks); i++)
+		if (IS_ERR(clks[i])) {
+			pr_err("i.MX28 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clks[i]));
+			return;
+		}
+
+	clk_data.clks = clks;
+	clk_data.clk_num = ARRAY_SIZE(clks);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+	clk_register_clkdev(clks[enet_out], NULL, "enet_out");
+
+	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+		clk_prepare_enable(clks[clks_init_on[i]]);
+}
+CLK_OF_DECLARE(imx28_clkctrl, "fsl,imx28-clkctrl", mx28_clocks_init);
diff --git a/drivers/clk/mxs/clk-pll.c b/drivers/clk/mxs/clk-pll.c
new file mode 100644
index 000000000..431cf6f2c
--- /dev/null
+++ b/drivers/clk/mxs/clk-pll.c
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+/**
+ * struct clk_pll - mxs pll clock
+ * @hw: clk_hw for the pll
+ * @base: base address of the pll
+ * @power: the shift of power bit
+ * @rate: the clock rate of the pll
+ *
+ * The mxs pll is a fixed rate clock with power and gate control,
+ * and the shift of gate bit is always 31.
+ */
+struct clk_pll {
+	struct clk_hw hw;
+	void __iomem *base;
+	u8 power;
+	unsigned long rate;
+};
+
+#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw)
+
+static int clk_pll_prepare(struct clk_hw *hw)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+
+	writel_relaxed(1 << pll->power, pll->base + SET);
+
+	udelay(10);
+
+	return 0;
+}
+
+static void clk_pll_unprepare(struct clk_hw *hw)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+
+	writel_relaxed(1 << pll->power, pll->base + CLR);
+}
+
+static int clk_pll_enable(struct clk_hw *hw)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+
+	writel_relaxed(1 << 31, pll->base + CLR);
+
+	return 0;
+}
+
+static void clk_pll_disable(struct clk_hw *hw)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+
+	writel_relaxed(1 << 31, pll->base + SET);
+}
+
+static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+
+	return pll->rate;
+}
+
+static const struct clk_ops clk_pll_ops = {
+	.prepare = clk_pll_prepare,
+	.unprepare = clk_pll_unprepare,
+	.enable = clk_pll_enable,
+	.disable = clk_pll_disable,
+	.recalc_rate = clk_pll_recalc_rate,
+};
+
+struct clk *mxs_clk_pll(const char *name, const char *parent_name,
+			void __iomem *base, u8 power, unsigned long rate)
+{
+	struct clk_pll *pll;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_pll_ops;
+	init.flags = 0;
+	init.parent_names = (parent_name ? &parent_name: NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
+	pll->base = base;
+	pll->rate = rate;
+	pll->power = power;
+	pll->hw.init = &init;
+
+	clk = clk_register(NULL, &pll->hw);
+	if (IS_ERR(clk))
+		kfree(pll);
+
+	return clk;
+}
diff --git a/drivers/clk/mxs/clk-ref.c b/drivers/clk/mxs/clk-ref.c
new file mode 100644
index 000000000..3161a0b02
--- /dev/null
+++ b/drivers/clk/mxs/clk-ref.c
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+/**
+ * struct clk_ref - mxs reference clock
+ * @hw: clk_hw for the reference clock
+ * @reg: register address
+ * @idx: the index of the reference clock within the same register
+ *
+ * The mxs reference clock sources from pll.  Every 4 reference clocks share
+ * one register space, and @idx is used to identify them.  Each reference
+ * clock has a gate control and a fractional * divider.  The rate is calculated
+ * as pll rate  * (18 / FRAC), where FRAC = 18 ~ 35.
+ */
+struct clk_ref {
+	struct clk_hw hw;
+	void __iomem *reg;
+	u8 idx;
+};
+
+#define to_clk_ref(_hw) container_of(_hw, struct clk_ref, hw)
+
+static int clk_ref_enable(struct clk_hw *hw)
+{
+	struct clk_ref *ref = to_clk_ref(hw);
+
+	writel_relaxed(1 << ((ref->idx + 1) * 8 - 1), ref->reg + CLR);
+
+	return 0;
+}
+
+static void clk_ref_disable(struct clk_hw *hw)
+{
+	struct clk_ref *ref = to_clk_ref(hw);
+
+	writel_relaxed(1 << ((ref->idx + 1) * 8 - 1), ref->reg + SET);
+}
+
+static unsigned long clk_ref_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct clk_ref *ref = to_clk_ref(hw);
+	u64 tmp = parent_rate;
+	u8 frac = (readl_relaxed(ref->reg) >> (ref->idx * 8)) & 0x3f;
+
+	tmp *= 18;
+	do_div(tmp, frac);
+
+	return tmp;
+}
+
+static long clk_ref_round_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *prate)
+{
+	unsigned long parent_rate = *prate;
+	u64 tmp = parent_rate;
+	u8 frac;
+
+	tmp = tmp * 18 + rate / 2;
+	do_div(tmp, rate);
+	frac = tmp;
+
+	if (frac < 18)
+		frac = 18;
+	else if (frac > 35)
+		frac = 35;
+
+	tmp = parent_rate;
+	tmp *= 18;
+	do_div(tmp, frac);
+
+	return tmp;
+}
+
+static int clk_ref_set_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	struct clk_ref *ref = to_clk_ref(hw);
+	unsigned long flags;
+	u64 tmp = parent_rate;
+	u32 val;
+	u8 frac, shift = ref->idx * 8;
+
+	tmp = tmp * 18 + rate / 2;
+	do_div(tmp, rate);
+	frac = tmp;
+
+	if (frac < 18)
+		frac = 18;
+	else if (frac > 35)
+		frac = 35;
+
+	spin_lock_irqsave(&mxs_lock, flags);
+
+	val = readl_relaxed(ref->reg);
+	val &= ~(0x3f << shift);
+	val |= frac << shift;
+	writel_relaxed(val, ref->reg);
+
+	spin_unlock_irqrestore(&mxs_lock, flags);
+
+	return 0;
+}
+
+static const struct clk_ops clk_ref_ops = {
+	.enable		= clk_ref_enable,
+	.disable	= clk_ref_disable,
+	.recalc_rate	= clk_ref_recalc_rate,
+	.round_rate	= clk_ref_round_rate,
+	.set_rate	= clk_ref_set_rate,
+};
+
+struct clk *mxs_clk_ref(const char *name, const char *parent_name,
+			void __iomem *reg, u8 idx)
+{
+	struct clk_ref *ref;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	ref = kzalloc(sizeof(*ref), GFP_KERNEL);
+	if (!ref)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_ref_ops;
+	init.flags = 0;
+	init.parent_names = (parent_name ? &parent_name: NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
+	ref->reg = reg;
+	ref->idx = idx;
+	ref->hw.init = &init;
+
+	clk = clk_register(NULL, &ref->hw);
+	if (IS_ERR(clk))
+		kfree(ref);
+
+	return clk;
+}
diff --git a/drivers/clk/mxs/clk-ssp.c b/drivers/clk/mxs/clk-ssp.c
new file mode 100644
index 000000000..0a1330607
--- /dev/null
+++ b/drivers/clk/mxs/clk-ssp.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 DENX Software Engineering, GmbH
+ *
+ * Pulled from code:
+ * Portions copyright (C) 2003 Russell King, PXA MMCI Driver
+ * Portions copyright (C) 2004-2005 Pierre Ossman, W83L51xD SD/MMC driver
+ *
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/spi/mxs-spi.h>
+
+void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate)
+{
+	unsigned int ssp_clk, ssp_sck;
+	u32 clock_divide, clock_rate;
+	u32 val;
+
+	ssp_clk = clk_get_rate(ssp->clk);
+
+	for (clock_divide = 2; clock_divide <= 254; clock_divide += 2) {
+		clock_rate = DIV_ROUND_UP(ssp_clk, rate * clock_divide);
+		clock_rate = (clock_rate > 0) ? clock_rate - 1 : 0;
+		if (clock_rate <= 255)
+			break;
+	}
+
+	if (clock_divide > 254) {
+		dev_err(ssp->dev,
+			"%s: cannot set clock to %d\n", __func__, rate);
+		return;
+	}
+
+	ssp_sck = ssp_clk / clock_divide / (1 + clock_rate);
+
+	val = readl(ssp->base + HW_SSP_TIMING(ssp));
+	val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE);
+	val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE);
+	val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE);
+	writel(val, ssp->base + HW_SSP_TIMING(ssp));
+
+	ssp->clk_rate = ssp_sck;
+
+	dev_dbg(ssp->dev,
+		"%s: clock_divide %d, clock_rate %d, ssp_clk %d, rate_actual %d, rate_requested %d\n",
+		__func__, clock_divide, clock_rate, ssp_clk, ssp_sck, rate);
+}
+EXPORT_SYMBOL_GPL(mxs_ssp_set_clk_rate);
diff --git a/drivers/clk/mxs/clk.c b/drivers/clk/mxs/clk.c
new file mode 100644
index 000000000..2fe78ba99
--- /dev/null
+++ b/drivers/clk/mxs/clk.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/spinlock.h>
+#include "clk.h"
+
+DEFINE_SPINLOCK(mxs_lock);
+
+int mxs_clk_wait(void __iomem *reg, u8 shift)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(10);
+
+	while (readl_relaxed(reg) & (1 << shift))
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+
+	return 0;
+}
diff --git a/drivers/clk/mxs/clk.h b/drivers/clk/mxs/clk.h
new file mode 100644
index 000000000..75729a7df
--- /dev/null
+++ b/drivers/clk/mxs/clk.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __MXS_CLK_H
+#define __MXS_CLK_H
+
+struct clk;
+
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+
+#define SET	0x4
+#define CLR	0x8
+
+extern spinlock_t mxs_lock;
+
+int mxs_clk_wait(void __iomem *reg, u8 shift);
+
+struct clk *mxs_clk_pll(const char *name, const char *parent_name,
+			void __iomem *base, u8 power, unsigned long rate);
+
+struct clk *mxs_clk_ref(const char *name, const char *parent_name,
+			void __iomem *reg, u8 idx);
+
+struct clk *mxs_clk_div(const char *name, const char *parent_name,
+			void __iomem *reg, u8 shift, u8 width, u8 busy);
+
+struct clk *mxs_clk_frac(const char *name, const char *parent_name,
+			 void __iomem *reg, u8 shift, u8 width, u8 busy);
+
+static inline struct clk *mxs_clk_fixed(const char *name, int rate)
+{
+	return clk_register_fixed_rate(NULL, name, NULL, 0, rate);
+}
+
+static inline struct clk *mxs_clk_gate(const char *name,
+			const char *parent_name, void __iomem *reg, u8 shift)
+{
+	return clk_register_gate(NULL, name, parent_name, CLK_SET_RATE_PARENT,
+				 reg, shift, CLK_GATE_SET_TO_DISABLE,
+				 &mxs_lock);
+}
+
+static inline struct clk *mxs_clk_mux(const char *name, void __iomem *reg,
+		u8 shift, u8 width, const char *const *parent_names, int num_parents)
+{
+	return clk_register_mux(NULL, name, parent_names, num_parents,
+				CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
+				reg, shift, width, 0, &mxs_lock);
+}
+
+static inline struct clk *mxs_clk_fixed_factor(const char *name,
+		const char *parent_name, unsigned int mult, unsigned int div)
+{
+	return clk_register_fixed_factor(NULL, name, parent_name,
+					 CLK_SET_RATE_PARENT, mult, div);
+}
+
+#endif /* __MXS_CLK_H */