Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1397 insertions, 0 deletions

diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h
new file mode 100644
index 000000000..ef3a8214d
--- /dev/null
+++ b/drivers/firmware/ti_sci.h
@@ -0,0 +1,1397 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Texas Instruments System Control Interface (TISCI) Protocol
+ *
+ * Communication protocol with TI SCI hardware
+ * The system works in a message response protocol
+ * See: http://processors.wiki.ti.com/index.php/TISCI for details
+ *
+ * Copyright (C)  2015-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#ifndef __TI_SCI_H
+#define __TI_SCI_H
+
+/* Generic Messages */
+#define TI_SCI_MSG_ENABLE_WDT	0x0000
+#define TI_SCI_MSG_WAKE_RESET	0x0001
+#define TI_SCI_MSG_VERSION	0x0002
+#define TI_SCI_MSG_WAKE_REASON	0x0003
+#define TI_SCI_MSG_GOODBYE	0x0004
+#define TI_SCI_MSG_SYS_RESET	0x0005
+
+/* Device requests */
+#define TI_SCI_MSG_SET_DEVICE_STATE	0x0200
+#define TI_SCI_MSG_GET_DEVICE_STATE	0x0201
+#define TI_SCI_MSG_SET_DEVICE_RESETS	0x0202
+
+/* Clock requests */
+#define TI_SCI_MSG_SET_CLOCK_STATE	0x0100
+#define TI_SCI_MSG_GET_CLOCK_STATE	0x0101
+#define TI_SCI_MSG_SET_CLOCK_PARENT	0x0102
+#define TI_SCI_MSG_GET_CLOCK_PARENT	0x0103
+#define TI_SCI_MSG_GET_NUM_CLOCK_PARENTS 0x0104
+#define TI_SCI_MSG_SET_CLOCK_FREQ	0x010c
+#define TI_SCI_MSG_QUERY_CLOCK_FREQ	0x010d
+#define TI_SCI_MSG_GET_CLOCK_FREQ	0x010e
+
+/* Resource Management Requests */
+#define TI_SCI_MSG_GET_RESOURCE_RANGE	0x1500
+
+/* IRQ requests */
+#define TI_SCI_MSG_SET_IRQ		0x1000
+#define TI_SCI_MSG_FREE_IRQ		0x1001
+
+/* NAVSS resource management */
+/* Ringacc requests */
+#define TI_SCI_MSG_RM_RING_ALLOCATE		0x1100
+#define TI_SCI_MSG_RM_RING_FREE			0x1101
+#define TI_SCI_MSG_RM_RING_RECONFIG		0x1102
+#define TI_SCI_MSG_RM_RING_RESET		0x1103
+#define TI_SCI_MSG_RM_RING_CFG			0x1110
+
+/* PSI-L requests */
+#define TI_SCI_MSG_RM_PSIL_PAIR			0x1280
+#define TI_SCI_MSG_RM_PSIL_UNPAIR		0x1281
+
+#define TI_SCI_MSG_RM_UDMAP_TX_ALLOC		0x1200
+#define TI_SCI_MSG_RM_UDMAP_TX_FREE		0x1201
+#define TI_SCI_MSG_RM_UDMAP_RX_ALLOC		0x1210
+#define TI_SCI_MSG_RM_UDMAP_RX_FREE		0x1211
+#define TI_SCI_MSG_RM_UDMAP_FLOW_CFG		0x1220
+#define TI_SCI_MSG_RM_UDMAP_OPT_FLOW_CFG	0x1221
+
+#define TISCI_MSG_RM_UDMAP_TX_CH_CFG		0x1205
+#define TISCI_MSG_RM_UDMAP_TX_CH_GET_CFG	0x1206
+#define TISCI_MSG_RM_UDMAP_RX_CH_CFG		0x1215
+#define TISCI_MSG_RM_UDMAP_RX_CH_GET_CFG	0x1216
+#define TISCI_MSG_RM_UDMAP_FLOW_CFG		0x1230
+#define TISCI_MSG_RM_UDMAP_FLOW_SIZE_THRESH_CFG	0x1231
+#define TISCI_MSG_RM_UDMAP_FLOW_GET_CFG		0x1232
+#define TISCI_MSG_RM_UDMAP_FLOW_SIZE_THRESH_GET_CFG	0x1233
+
+/* Processor Control requests */
+#define TI_SCI_MSG_PROC_REQUEST		0xc000
+#define TI_SCI_MSG_PROC_RELEASE		0xc001
+#define TI_SCI_MSG_PROC_HANDOVER	0xc005
+#define TI_SCI_MSG_SET_CONFIG		0xc100
+#define TI_SCI_MSG_SET_CTRL		0xc101
+#define TI_SCI_MSG_GET_STATUS		0xc400
+
+/**
+ * struct ti_sci_msg_hdr - Generic Message Header for All messages and responses
+ * @type:	Type of messages: One of TI_SCI_MSG* values
+ * @host:	Host of the message
+ * @seq:	Message identifier indicating a transfer sequence
+ * @flags:	Flag for the message
+ */
+struct ti_sci_msg_hdr {
+	u16 type;
+	u8 host;
+	u8 seq;
+#define TI_SCI_MSG_FLAG(val)			(1 << (val))
+#define TI_SCI_FLAG_REQ_GENERIC_NORESPONSE	0x0
+#define TI_SCI_FLAG_REQ_ACK_ON_RECEIVED		TI_SCI_MSG_FLAG(0)
+#define TI_SCI_FLAG_REQ_ACK_ON_PROCESSED	TI_SCI_MSG_FLAG(1)
+#define TI_SCI_FLAG_RESP_GENERIC_NACK		0x0
+#define TI_SCI_FLAG_RESP_GENERIC_ACK		TI_SCI_MSG_FLAG(1)
+	/* Additional Flags */
+	u32 flags;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_version - Response for a message
+ * @hdr:		Generic header
+ * @firmware_description: String describing the firmware
+ * @firmware_revision:	Firmware revision
+ * @abi_major:		Major version of the ABI that firmware supports
+ * @abi_minor:		Minor version of the ABI that firmware supports
+ *
+ * In general, ABI version changes follow the rule that minor version increments
+ * are backward compatible. Major revision changes in ABI may not be
+ * backward compatible.
+ *
+ * Response to a generic message with message type TI_SCI_MSG_VERSION
+ */
+struct ti_sci_msg_resp_version {
+	struct ti_sci_msg_hdr hdr;
+	char firmware_description[32];
+	u16 firmware_revision;
+	u8 abi_major;
+	u8 abi_minor;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_reboot - Reboot the SoC
+ * @hdr:	Generic Header
+ *
+ * Request type is TI_SCI_MSG_SYS_RESET, responded with a generic
+ * ACK/NACK message.
+ */
+struct ti_sci_msg_req_reboot {
+	struct ti_sci_msg_hdr hdr;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_device_state - Set the desired state of the device
+ * @hdr:		Generic header
+ * @id:	Indicates which device to modify
+ * @reserved: Reserved space in message, must be 0 for backward compatibility
+ * @state: The desired state of the device.
+ *
+ * Certain flags can also be set to alter the device state:
+ * + MSG_FLAG_DEVICE_WAKE_ENABLED - Configure the device to be a wake source.
+ * The meaning of this flag will vary slightly from device to device and from
+ * SoC to SoC but it generally allows the device to wake the SoC out of deep
+ * suspend states.
+ * + MSG_FLAG_DEVICE_RESET_ISO - Enable reset isolation for this device.
+ * + MSG_FLAG_DEVICE_EXCLUSIVE - Claim this device exclusively. When passed
+ * with STATE_RETENTION or STATE_ON, it will claim the device exclusively.
+ * If another host already has this device set to STATE_RETENTION or STATE_ON,
+ * the message will fail. Once successful, other hosts attempting to set
+ * STATE_RETENTION or STATE_ON will fail.
+ *
+ * Request type is TI_SCI_MSG_SET_DEVICE_STATE, responded with a generic
+ * ACK/NACK message.
+ */
+struct ti_sci_msg_req_set_device_state {
+	/* Additional hdr->flags options */
+#define MSG_FLAG_DEVICE_WAKE_ENABLED	TI_SCI_MSG_FLAG(8)
+#define MSG_FLAG_DEVICE_RESET_ISO	TI_SCI_MSG_FLAG(9)
+#define MSG_FLAG_DEVICE_EXCLUSIVE	TI_SCI_MSG_FLAG(10)
+	struct ti_sci_msg_hdr hdr;
+	u32 id;
+	u32 reserved;
+
+#define MSG_DEVICE_SW_STATE_AUTO_OFF	0
+#define MSG_DEVICE_SW_STATE_RETENTION	1
+#define MSG_DEVICE_SW_STATE_ON		2
+	u8 state;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_device_state - Request to get device.
+ * @hdr:		Generic header
+ * @id:		Device Identifier
+ *
+ * Request type is TI_SCI_MSG_GET_DEVICE_STATE, responded device state
+ * information
+ */
+struct ti_sci_msg_req_get_device_state {
+	struct ti_sci_msg_hdr hdr;
+	u32 id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_device_state - Response to get device request.
+ * @hdr:		Generic header
+ * @context_loss_count: Indicates how many times the device has lost context. A
+ *	driver can use this monotonic counter to determine if the device has
+ *	lost context since the last time this message was exchanged.
+ * @resets: Programmed state of the reset lines.
+ * @programmed_state:	The state as programmed by set_device.
+ *			- Uses the MSG_DEVICE_SW_* macros
+ * @current_state:	The actual state of the hardware.
+ *
+ * Response to request TI_SCI_MSG_GET_DEVICE_STATE.
+ */
+struct ti_sci_msg_resp_get_device_state {
+	struct ti_sci_msg_hdr hdr;
+	u32 context_loss_count;
+	u32 resets;
+	u8 programmed_state;
+#define MSG_DEVICE_HW_STATE_OFF		0
+#define MSG_DEVICE_HW_STATE_ON		1
+#define MSG_DEVICE_HW_STATE_TRANS	2
+	u8 current_state;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_device_resets - Set the desired resets
+ *				configuration of the device
+ * @hdr:		Generic header
+ * @id:	Indicates which device to modify
+ * @resets: A bit field of resets for the device. The meaning, behavior,
+ *	and usage of the reset flags are device specific. 0 for a bit
+ *	indicates releasing the reset represented by that bit while 1
+ *	indicates keeping it held.
+ *
+ * Request type is TI_SCI_MSG_SET_DEVICE_RESETS, responded with a generic
+ * ACK/NACK message.
+ */
+struct ti_sci_msg_req_set_device_resets {
+	struct ti_sci_msg_hdr hdr;
+	u32 id;
+	u32 resets;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_clock_state - Request to setup a Clock state
+ * @hdr:	Generic Header, Certain flags can be set specific to the clocks:
+ *		MSG_FLAG_CLOCK_ALLOW_SSC: Allow this clock to be modified
+ *		via spread spectrum clocking.
+ *		MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE: Allow this clock's
+ *		frequency to be changed while it is running so long as it
+ *		is within the min/max limits.
+ *		MSG_FLAG_CLOCK_INPUT_TERM: Enable input termination, this
+ *		is only applicable to clock inputs on the SoC pseudo-device.
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to modify. Set to 255 if clock ID is
+ *		greater than or equal to 255.
+ * @request_state: Request the state for the clock to be set to.
+ *		MSG_CLOCK_SW_STATE_UNREQ: The IP does not require this clock,
+ *		it can be disabled, regardless of the state of the device
+ *		MSG_CLOCK_SW_STATE_AUTO: Allow the System Controller to
+ *		automatically manage the state of this clock. If the device
+ *		is enabled, then the clock is enabled. If the device is set
+ *		to off or retention, then the clock is internally set as not
+ *		being required by the device.(default)
+ *		MSG_CLOCK_SW_STATE_REQ:  Configure the clock to be enabled,
+ *		regardless of the state of the device.
+ * @clk_id_32:	Clock identifier for the device for this request.
+ *		Only to be used if the clock ID is greater than or equal to
+ *		255.
+ *
+ * Normally, all required clocks are managed by TISCI entity, this is used
+ * only for specific control *IF* required. Auto managed state is
+ * MSG_CLOCK_SW_STATE_AUTO, in other states, TISCI entity assume remote
+ * will explicitly control.
+ *
+ * Request type is TI_SCI_MSG_SET_CLOCK_STATE, response is a generic
+ * ACK or NACK message.
+ */
+struct ti_sci_msg_req_set_clock_state {
+	/* Additional hdr->flags options */
+#define MSG_FLAG_CLOCK_ALLOW_SSC		TI_SCI_MSG_FLAG(8)
+#define MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE	TI_SCI_MSG_FLAG(9)
+#define MSG_FLAG_CLOCK_INPUT_TERM		TI_SCI_MSG_FLAG(10)
+	struct ti_sci_msg_hdr hdr;
+	u32 dev_id;
+	u8 clk_id;
+#define MSG_CLOCK_SW_STATE_UNREQ	0
+#define MSG_CLOCK_SW_STATE_AUTO		1
+#define MSG_CLOCK_SW_STATE_REQ		2
+	u8 request_state;
+	u32 clk_id_32;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_clock_state - Request for clock state
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to get state of. Set to 255 if the clock
+ *		ID is greater than or equal to 255.
+ * @clk_id_32:	Clock identifier for the device for the request.
+ *		Only to be used if the clock ID is greater than or equal to
+ *		255.
+ *
+ * Request type is TI_SCI_MSG_GET_CLOCK_STATE, response is state
+ * of the clock
+ */
+struct ti_sci_msg_req_get_clock_state {
+	struct ti_sci_msg_hdr hdr;
+	u32 dev_id;
+	u8 clk_id;
+	u32 clk_id_32;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_clock_state - Response to get clock state
+ * @hdr:	Generic Header
+ * @programmed_state: Any programmed state of the clock. This is one of
+ *		MSG_CLOCK_SW_STATE* values.
+ * @current_state: Current state of the clock. This is one of:
+ *		MSG_CLOCK_HW_STATE_NOT_READY: Clock is not ready
+ *		MSG_CLOCK_HW_STATE_READY: Clock is ready
+ *
+ * Response to TI_SCI_MSG_GET_CLOCK_STATE.
+ */
+struct ti_sci_msg_resp_get_clock_state {
+	struct ti_sci_msg_hdr hdr;
+	u8 programmed_state;
+#define MSG_CLOCK_HW_STATE_NOT_READY	0
+#define MSG_CLOCK_HW_STATE_READY	1
+	u8 current_state;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_clock_parent - Set the clock parent
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to modify. Set to 255 if clock ID is
+ *		greater than or equal to 255.
+ * @parent_id:	The new clock parent is selectable by an index via this
+ *		parameter. Set to 255 if clock ID is greater than or
+ *		equal to 255.
+ * @clk_id_32:	Clock identifier if @clk_id field is 255.
+ * @parent_id_32:	Parent identifier if @parent_id is 255.
+ *
+ * Request type is TI_SCI_MSG_SET_CLOCK_PARENT, response is generic
+ * ACK / NACK message.
+ */
+struct ti_sci_msg_req_set_clock_parent {
+	struct ti_sci_msg_hdr hdr;
+	u32 dev_id;
+	u8 clk_id;
+	u8 parent_id;
+	u32 clk_id_32;
+	u32 parent_id_32;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_clock_parent - Get the clock parent
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to get the parent for. If this field
+ *		contains 255, the actual clock identifier is stored in
+ *		@clk_id_32.
+ * @clk_id_32:	Clock identifier if the @clk_id field contains 255.
+ *
+ * Request type is TI_SCI_MSG_GET_CLOCK_PARENT, response is parent information
+ */
+struct ti_sci_msg_req_get_clock_parent {
+	struct ti_sci_msg_hdr hdr;
+	u32 dev_id;
+	u8 clk_id;
+	u32 clk_id_32;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_clock_parent - Response with clock parent
+ * @hdr:	Generic Header
+ * @parent_id:	The current clock parent. If set to 255, the current parent
+ *		ID can be found from the @parent_id_32 field.
+ * @parent_id_32:	Current clock parent if @parent_id field is set to
+ *			255.
+ *
+ * Response to TI_SCI_MSG_GET_CLOCK_PARENT.
+ */
+struct ti_sci_msg_resp_get_clock_parent {
+	struct ti_sci_msg_hdr hdr;
+	u8 parent_id;
+	u32 parent_id_32;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_clock_num_parents - Request to get clock parents
+ * @hdr:	Generic header
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request. Set to
+ *		255 if clock ID is greater than or equal to 255.
+ * @clk_id_32:	Clock identifier if the @clk_id field contains 255.
+ *
+ * This request provides information about how many clock parent options
+ * are available for a given clock to a device. This is typically used
+ * for input clocks.
+ *
+ * Request type is TI_SCI_MSG_GET_NUM_CLOCK_PARENTS, response is appropriate
+ * message, or NACK in case of inability to satisfy request.
+ */
+struct ti_sci_msg_req_get_clock_num_parents {
+	struct ti_sci_msg_hdr hdr;
+	u32 dev_id;
+	u8 clk_id;
+	u32 clk_id_32;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_clock_num_parents - Response for get clk parents
+ * @hdr:		Generic header
+ * @num_parents:	Number of clock parents. If set to 255, the actual
+ *			number of parents is stored into @num_parents_32
+ *			field instead.
+ * @num_parents_32:	Number of clock parents if @num_parents field is
+ *			set to 255.
+ *
+ * Response to TI_SCI_MSG_GET_NUM_CLOCK_PARENTS
+ */
+struct ti_sci_msg_resp_get_clock_num_parents {
+	struct ti_sci_msg_hdr hdr;
+	u8 num_parents;
+	u32 num_parents_32;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_query_clock_freq - Request to query a frequency
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @min_freq_hz: The minimum allowable frequency in Hz. This is the minimum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @target_freq_hz: The target clock frequency. A frequency will be found
+ *		as close to this target frequency as possible.
+ * @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @clk_id:	Clock identifier for the device for this request. Set to
+ *		255 if clock identifier is greater than or equal to 255.
+ * @clk_id_32:	Clock identifier if @clk_id is set to 255.
+ *
+ * NOTE: Normally clock frequency management is automatically done by TISCI
+ * entity. In case of specific requests, TISCI evaluates capability to achieve
+ * requested frequency within provided range and responds with
+ * result message.
+ *
+ * Request type is TI_SCI_MSG_QUERY_CLOCK_FREQ, response is appropriate message,
+ * or NACK in case of inability to satisfy request.
+ */
+struct ti_sci_msg_req_query_clock_freq {
+	struct ti_sci_msg_hdr hdr;
+	u32 dev_id;
+	u64 min_freq_hz;
+	u64 target_freq_hz;
+	u64 max_freq_hz;
+	u8 clk_id;
+	u32 clk_id_32;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_query_clock_freq - Response to a clock frequency query
+ * @hdr:	Generic Header
+ * @freq_hz:	Frequency that is the best match in Hz.
+ *
+ * Response to request type TI_SCI_MSG_QUERY_CLOCK_FREQ. NOTE: if the request
+ * cannot be satisfied, the message will be of type NACK.
+ */
+struct ti_sci_msg_resp_query_clock_freq {
+	struct ti_sci_msg_hdr hdr;
+	u64 freq_hz;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_clock_freq - Request to setup a clock frequency
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @min_freq_hz: The minimum allowable frequency in Hz. This is the minimum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @target_freq_hz: The target clock frequency. The clock will be programmed
+ *		at a rate as close to this target frequency as possible.
+ * @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @clk_id:	Clock identifier for the device for this request. Set to
+ *		255 if clock ID is greater than or equal to 255.
+ * @clk_id_32:	Clock identifier if @clk_id field is set to 255.
+ *
+ * NOTE: Normally clock frequency management is automatically done by TISCI
+ * entity. In case of specific requests, TISCI evaluates capability to achieve
+ * requested range and responds with success/failure message.
+ *
+ * This sets the desired frequency for a clock within an allowable
+ * range. This message will fail on an enabled clock unless
+ * MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE is set for the clock. Additionally,
+ * if other clocks have their frequency modified due to this message,
+ * they also must have the MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE or be disabled.
+ *
+ * Calling set frequency on a clock input to the SoC pseudo-device will
+ * inform the PMMC of that clock's frequency. Setting a frequency of
+ * zero will indicate the clock is disabled.
+ *
+ * Calling set frequency on clock outputs from the SoC pseudo-device will
+ * function similarly to setting the clock frequency on a device.
+ *
+ * Request type is TI_SCI_MSG_SET_CLOCK_FREQ, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_set_clock_freq {
+	struct ti_sci_msg_hdr hdr;
+	u32 dev_id;
+	u64 min_freq_hz;
+	u64 target_freq_hz;
+	u64 max_freq_hz;
+	u8 clk_id;
+	u32 clk_id_32;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_clock_freq - Request to get the clock frequency
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request. Set to
+ *		255 if clock ID is greater than or equal to 255.
+ * @clk_id_32:	Clock identifier if @clk_id field is set to 255.
+ *
+ * NOTE: Normally clock frequency management is automatically done by TISCI
+ * entity. In some cases, clock frequencies are configured by host.
+ *
+ * Request type is TI_SCI_MSG_GET_CLOCK_FREQ, responded with clock frequency
+ * that the clock is currently at.
+ */
+struct ti_sci_msg_req_get_clock_freq {
+	struct ti_sci_msg_hdr hdr;
+	u32 dev_id;
+	u8 clk_id;
+	u32 clk_id_32;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_clock_freq - Response of clock frequency request
+ * @hdr:	Generic Header
+ * @freq_hz:	Frequency that the clock is currently on, in Hz.
+ *
+ * Response to request type TI_SCI_MSG_GET_CLOCK_FREQ.
+ */
+struct ti_sci_msg_resp_get_clock_freq {
+	struct ti_sci_msg_hdr hdr;
+	u64 freq_hz;
+} __packed;
+
+#define TI_SCI_IRQ_SECONDARY_HOST_INVALID	0xff
+
+/**
+ * struct ti_sci_msg_req_get_resource_range - Request to get a host's assigned
+ *					      range of resources.
+ * @hdr:		Generic Header
+ * @type:		Unique resource assignment type
+ * @subtype:		Resource assignment subtype within the resource type.
+ * @secondary_host:	Host processing entity to which the resources are
+ *			allocated. This is required only when the destination
+ *			host id id different from ti sci interface host id,
+ *			else TI_SCI_IRQ_SECONDARY_HOST_INVALID can be passed.
+ *
+ * Request type is TI_SCI_MSG_GET_RESOURCE_RANGE. Responded with requested
+ * resource range which is of type TI_SCI_MSG_GET_RESOURCE_RANGE.
+ */
+struct ti_sci_msg_req_get_resource_range {
+	struct ti_sci_msg_hdr hdr;
+#define MSG_RM_RESOURCE_TYPE_MASK	GENMASK(9, 0)
+#define MSG_RM_RESOURCE_SUBTYPE_MASK	GENMASK(5, 0)
+	u16 type;
+	u8 subtype;
+	u8 secondary_host;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_resource_range - Response to resource get range.
+ * @hdr:		Generic Header
+ * @range_start:	Start index of the first resource range.
+ * @range_num:		Number of resources in the first range.
+ * @range_start_sec:	Start index of the second resource range.
+ * @range_num_sec:	Number of resources in the second range.
+ *
+ * Response to request TI_SCI_MSG_GET_RESOURCE_RANGE.
+ */
+struct ti_sci_msg_resp_get_resource_range {
+	struct ti_sci_msg_hdr hdr;
+	u16 range_start;
+	u16 range_num;
+	u16 range_start_sec;
+	u16 range_num_sec;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_manage_irq - Request to configure/release the route
+ *					between the dev and the host.
+ * @hdr:		Generic Header
+ * @valid_params:	Bit fields defining the validity of interrupt source
+ *			parameters. If a bit is not set, then corresponding
+ *			field is not valid and will not be used for route set.
+ *			Bit field definitions:
+ *			0 - Valid bit for @dst_id
+ *			1 - Valid bit for @dst_host_irq
+ *			2 - Valid bit for @ia_id
+ *			3 - Valid bit for @vint
+ *			4 - Valid bit for @global_event
+ *			5 - Valid bit for @vint_status_bit_index
+ *			31 - Valid bit for @secondary_host
+ * @src_id:		IRQ source peripheral ID.
+ * @src_index:		IRQ source index within the peripheral
+ * @dst_id:		IRQ Destination ID. Based on the architecture it can be
+ *			IRQ controller or host processor ID.
+ * @dst_host_irq:	IRQ number of the destination host IRQ controller
+ * @ia_id:		Device ID of the interrupt aggregator in which the
+ *			vint resides.
+ * @vint:		Virtual interrupt number if the interrupt route
+ *			is through an interrupt aggregator.
+ * @global_event:	Global event that is to be mapped to interrupt
+ *			aggregator virtual interrupt status bit.
+ * @vint_status_bit:	Virtual interrupt status bit if the interrupt route
+ *			utilizes an interrupt aggregator status bit.
+ * @secondary_host:	Host ID of the IRQ destination computing entity. This is
+ *			required only when destination host id is different
+ *			from ti sci interface host id.
+ *
+ * Request type is TI_SCI_MSG_SET/RELEASE_IRQ.
+ * Response is generic ACK / NACK message.
+ */
+struct ti_sci_msg_req_manage_irq {
+	struct ti_sci_msg_hdr hdr;
+#define MSG_FLAG_DST_ID_VALID			TI_SCI_MSG_FLAG(0)
+#define MSG_FLAG_DST_HOST_IRQ_VALID		TI_SCI_MSG_FLAG(1)
+#define MSG_FLAG_IA_ID_VALID			TI_SCI_MSG_FLAG(2)
+#define MSG_FLAG_VINT_VALID			TI_SCI_MSG_FLAG(3)
+#define MSG_FLAG_GLB_EVNT_VALID			TI_SCI_MSG_FLAG(4)
+#define MSG_FLAG_VINT_STS_BIT_VALID		TI_SCI_MSG_FLAG(5)
+#define MSG_FLAG_SHOST_VALID			TI_SCI_MSG_FLAG(31)
+	u32 valid_params;
+	u16 src_id;
+	u16 src_index;
+	u16 dst_id;
+	u16 dst_host_irq;
+	u16 ia_id;
+	u16 vint;
+	u16 global_event;
+	u8 vint_status_bit;
+	u8 secondary_host;
+} __packed;
+
+/**
+ * struct ti_sci_msg_rm_ring_cfg_req - Configure a Navigator Subsystem ring
+ *
+ * Configures the non-real-time registers of a Navigator Subsystem ring.
+ * @hdr:	Generic Header
+ * @valid_params: Bitfield defining validity of ring configuration parameters.
+ *	The ring configuration fields are not valid, and will not be used for
+ *	ring configuration, if their corresponding valid bit is zero.
+ *	Valid bit usage:
+ *	0 - Valid bit for @tisci_msg_rm_ring_cfg_req addr_lo
+ *	1 - Valid bit for @tisci_msg_rm_ring_cfg_req addr_hi
+ *	2 - Valid bit for @tisci_msg_rm_ring_cfg_req count
+ *	3 - Valid bit for @tisci_msg_rm_ring_cfg_req mode
+ *	4 - Valid bit for @tisci_msg_rm_ring_cfg_req size
+ *	5 - Valid bit for @tisci_msg_rm_ring_cfg_req order_id
+ *	6 - Valid bit for @tisci_msg_rm_ring_cfg_req virtid
+ *	7 - Valid bit for @tisci_msg_rm_ring_cfg_req ASEL
+ * @nav_id: Device ID of Navigator Subsystem from which the ring is allocated
+ * @index: ring index to be configured.
+ * @addr_lo: 32 LSBs of ring base address to be programmed into the ring's
+ *	RING_BA_LO register
+ * @addr_hi: 16 MSBs of ring base address to be programmed into the ring's
+ *	RING_BA_HI register.
+ * @count: Number of ring elements. Must be even if mode is CREDENTIALS or QM
+ *	modes.
+ * @mode: Specifies the mode the ring is to be configured.
+ * @size: Specifies encoded ring element size. To calculate the encoded size use
+ *	the formula (log2(size_bytes) - 2), where size_bytes cannot be
+ *	greater than 256.
+ * @order_id: Specifies the ring's bus order ID.
+ * @virtid: Ring virt ID value
+ * @asel: Ring ASEL (address select) value to be set into the ASEL field of the
+ *	ring's RING_BA_HI register.
+ */
+struct ti_sci_msg_rm_ring_cfg_req {
+	struct ti_sci_msg_hdr hdr;
+	u32 valid_params;
+	u16 nav_id;
+	u16 index;
+	u32 addr_lo;
+	u32 addr_hi;
+	u32 count;
+	u8 mode;
+	u8 size;
+	u8 order_id;
+	u16 virtid;
+	u8 asel;
+} __packed;
+
+/**
+ * struct ti_sci_msg_psil_pair - Pairs a PSI-L source thread to a destination
+ *				 thread
+ * @hdr:	Generic Header
+ * @nav_id:	SoC Navigator Subsystem device ID whose PSI-L config proxy is
+ *		used to pair the source and destination threads.
+ * @src_thread:	PSI-L source thread ID within the PSI-L System thread map.
+ *
+ * UDMAP transmit channels mapped to source threads will have their
+ * TCHAN_THRD_ID register programmed with the destination thread if the pairing
+ * is successful.
+
+ * @dst_thread: PSI-L destination thread ID within the PSI-L System thread map.
+ * PSI-L destination threads start at index 0x8000.  The request is NACK'd if
+ * the destination thread is not greater than or equal to 0x8000.
+ *
+ * UDMAP receive channels mapped to destination threads will have their
+ * RCHAN_THRD_ID register programmed with the source thread if the pairing
+ * is successful.
+ *
+ * Request type is TI_SCI_MSG_RM_PSIL_PAIR, response is a generic ACK or NACK
+ * message.
+ */
+struct ti_sci_msg_psil_pair {
+	struct ti_sci_msg_hdr hdr;
+	u32 nav_id;
+	u32 src_thread;
+	u32 dst_thread;
+} __packed;
+
+/**
+ * struct ti_sci_msg_psil_unpair - Unpairs a PSI-L source thread from a
+ *				   destination thread
+ * @hdr:	Generic Header
+ * @nav_id:	SoC Navigator Subsystem device ID whose PSI-L config proxy is
+ *		used to unpair the source and destination threads.
+ * @src_thread:	PSI-L source thread ID within the PSI-L System thread map.
+ *
+ * UDMAP transmit channels mapped to source threads will have their
+ * TCHAN_THRD_ID register cleared if the unpairing is successful.
+ *
+ * @dst_thread: PSI-L destination thread ID within the PSI-L System thread map.
+ * PSI-L destination threads start at index 0x8000.  The request is NACK'd if
+ * the destination thread is not greater than or equal to 0x8000.
+ *
+ * UDMAP receive channels mapped to destination threads will have their
+ * RCHAN_THRD_ID register cleared if the unpairing is successful.
+ *
+ * Request type is TI_SCI_MSG_RM_PSIL_UNPAIR, response is a generic ACK or NACK
+ * message.
+ */
+struct ti_sci_msg_psil_unpair {
+	struct ti_sci_msg_hdr hdr;
+	u32 nav_id;
+	u32 src_thread;
+	u32 dst_thread;
+} __packed;
+
+/**
+ * struct ti_sci_msg_udmap_rx_flow_cfg -  UDMAP receive flow configuration
+ *					  message
+ * @hdr: Generic Header
+ * @nav_id: SoC Navigator Subsystem device ID from which the receive flow is
+ *	allocated
+ * @flow_index: UDMAP receive flow index for non-optional configuration.
+ * @rx_ch_index: Specifies the index of the receive channel using the flow_index
+ * @rx_einfo_present: UDMAP receive flow extended packet info present.
+ * @rx_psinfo_present: UDMAP receive flow PS words present.
+ * @rx_error_handling: UDMAP receive flow error handling configuration. Valid
+ *	values are TI_SCI_RM_UDMAP_RX_FLOW_ERR_DROP/RETRY.
+ * @rx_desc_type: UDMAP receive flow descriptor type. It can be one of
+ *	TI_SCI_RM_UDMAP_RX_FLOW_DESC_HOST/MONO.
+ * @rx_sop_offset: UDMAP receive flow start of packet offset.
+ * @rx_dest_qnum: UDMAP receive flow destination queue number.
+ * @rx_ps_location: UDMAP receive flow PS words location.
+ *	0 - end of packet descriptor
+ *	1 - Beginning of the data buffer
+ * @rx_src_tag_hi: UDMAP receive flow source tag high byte constant
+ * @rx_src_tag_lo: UDMAP receive flow source tag low byte constant
+ * @rx_dest_tag_hi: UDMAP receive flow destination tag high byte constant
+ * @rx_dest_tag_lo: UDMAP receive flow destination tag low byte constant
+ * @rx_src_tag_hi_sel: UDMAP receive flow source tag high byte selector
+ * @rx_src_tag_lo_sel: UDMAP receive flow source tag low byte selector
+ * @rx_dest_tag_hi_sel: UDMAP receive flow destination tag high byte selector
+ * @rx_dest_tag_lo_sel: UDMAP receive flow destination tag low byte selector
+ * @rx_size_thresh_en: UDMAP receive flow packet size based free buffer queue
+ *	enable. If enabled, the ti_sci_rm_udmap_rx_flow_opt_cfg also need to be
+ *	configured and sent.
+ * @rx_fdq0_sz0_qnum: UDMAP receive flow free descriptor queue 0.
+ * @rx_fdq1_qnum: UDMAP receive flow free descriptor queue 1.
+ * @rx_fdq2_qnum: UDMAP receive flow free descriptor queue 2.
+ * @rx_fdq3_qnum: UDMAP receive flow free descriptor queue 3.
+ *
+ * For detailed information on the settings, see the UDMAP section of the TRM.
+ */
+struct ti_sci_msg_udmap_rx_flow_cfg {
+	struct ti_sci_msg_hdr hdr;
+	u32 nav_id;
+	u32 flow_index;
+	u32 rx_ch_index;
+	u8 rx_einfo_present;
+	u8 rx_psinfo_present;
+	u8 rx_error_handling;
+	u8 rx_desc_type;
+	u16 rx_sop_offset;
+	u16 rx_dest_qnum;
+	u8 rx_ps_location;
+	u8 rx_src_tag_hi;
+	u8 rx_src_tag_lo;
+	u8 rx_dest_tag_hi;
+	u8 rx_dest_tag_lo;
+	u8 rx_src_tag_hi_sel;
+	u8 rx_src_tag_lo_sel;
+	u8 rx_dest_tag_hi_sel;
+	u8 rx_dest_tag_lo_sel;
+	u8 rx_size_thresh_en;
+	u16 rx_fdq0_sz0_qnum;
+	u16 rx_fdq1_qnum;
+	u16 rx_fdq2_qnum;
+	u16 rx_fdq3_qnum;
+} __packed;
+
+/**
+ * struct rm_ti_sci_msg_udmap_rx_flow_opt_cfg - parameters for UDMAP receive
+ *						flow optional configuration
+ * @hdr: Generic Header
+ * @nav_id: SoC Navigator Subsystem device ID from which the receive flow is
+ *	allocated
+ * @flow_index: UDMAP receive flow index for optional configuration.
+ * @rx_ch_index: Specifies the index of the receive channel using the flow_index
+ * @rx_size_thresh0: UDMAP receive flow packet size threshold 0.
+ * @rx_size_thresh1: UDMAP receive flow packet size threshold 1.
+ * @rx_size_thresh2: UDMAP receive flow packet size threshold 2.
+ * @rx_fdq0_sz1_qnum: UDMAP receive flow free descriptor queue for size
+ *	threshold 1.
+ * @rx_fdq0_sz2_qnum: UDMAP receive flow free descriptor queue for size
+ *	threshold 2.
+ * @rx_fdq0_sz3_qnum: UDMAP receive flow free descriptor queue for size
+ *	threshold 3.
+ *
+ * For detailed information on the settings, see the UDMAP section of the TRM.
+ */
+struct rm_ti_sci_msg_udmap_rx_flow_opt_cfg {
+	struct ti_sci_msg_hdr hdr;
+	u32 nav_id;
+	u32 flow_index;
+	u32 rx_ch_index;
+	u16 rx_size_thresh0;
+	u16 rx_size_thresh1;
+	u16 rx_size_thresh2;
+	u16 rx_fdq0_sz1_qnum;
+	u16 rx_fdq0_sz2_qnum;
+	u16 rx_fdq0_sz3_qnum;
+} __packed;
+
+/**
+ * Configures a Navigator Subsystem UDMAP transmit channel
+ *
+ * Configures the non-real-time registers of a Navigator Subsystem UDMAP
+ * transmit channel.  The channel index must be assigned to the host defined
+ * in the TISCI header via the RM board configuration resource assignment
+ * range list.
+ *
+ * @hdr: Generic Header
+ *
+ * @valid_params: Bitfield defining validity of tx channel configuration
+ * parameters. The tx channel configuration fields are not valid, and will not
+ * be used for ch configuration, if their corresponding valid bit is zero.
+ * Valid bit usage:
+ *    0 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_pause_on_err
+ *    1 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_atype
+ *    2 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_chan_type
+ *    3 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_fetch_size
+ *    4 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::txcq_qnum
+ *    5 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_priority
+ *    6 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_qos
+ *    7 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_orderid
+ *    8 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_sched_priority
+ *    9 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_filt_einfo
+ *   10 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_filt_pswords
+ *   11 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_supr_tdpkt
+ *   12 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_credit_count
+ *   13 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::fdepth
+ *   14 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_burst_size
+ *   15 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_tdtype
+ *   16 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::extended_ch_type
+ *
+ * @nav_id: SoC device ID of Navigator Subsystem where tx channel is located
+ *
+ * @index: UDMAP transmit channel index.
+ *
+ * @tx_pause_on_err: UDMAP transmit channel pause on error configuration to
+ * be programmed into the tx_pause_on_err field of the channel's TCHAN_TCFG
+ * register.
+ *
+ * @tx_filt_einfo: UDMAP transmit channel extended packet information passing
+ * configuration to be programmed into the tx_filt_einfo field of the
+ * channel's TCHAN_TCFG register.
+ *
+ * @tx_filt_pswords: UDMAP transmit channel protocol specific word passing
+ * configuration to be programmed into the tx_filt_pswords field of the
+ * channel's TCHAN_TCFG register.
+ *
+ * @tx_atype: UDMAP transmit channel non Ring Accelerator access pointer
+ * interpretation configuration to be programmed into the tx_atype field of
+ * the channel's TCHAN_TCFG register.
+ *
+ * @tx_chan_type: UDMAP transmit channel functional channel type and work
+ * passing mechanism configuration to be programmed into the tx_chan_type
+ * field of the channel's TCHAN_TCFG register.
+ *
+ * @tx_supr_tdpkt: UDMAP transmit channel teardown packet generation suppression
+ * configuration to be programmed into the tx_supr_tdpkt field of the channel's
+ * TCHAN_TCFG register.
+ *
+ * @tx_fetch_size: UDMAP transmit channel number of 32-bit descriptor words to
+ * fetch configuration to be programmed into the tx_fetch_size field of the
+ * channel's TCHAN_TCFG register.  The user must make sure to set the maximum
+ * word count that can pass through the channel for any allowed descriptor type.
+ *
+ * @tx_credit_count: UDMAP transmit channel transfer request credit count
+ * configuration to be programmed into the count field of the TCHAN_TCREDIT
+ * register.  Specifies how many credits for complete TRs are available.
+ *
+ * @txcq_qnum: UDMAP transmit channel completion queue configuration to be
+ * programmed into the txcq_qnum field of the TCHAN_TCQ register. The specified
+ * completion queue must be assigned to the host, or a subordinate of the host,
+ * requesting configuration of the transmit channel.
+ *
+ * @tx_priority: UDMAP transmit channel transmit priority value to be programmed
+ * into the priority field of the channel's TCHAN_TPRI_CTRL register.
+ *
+ * @tx_qos: UDMAP transmit channel transmit qos value to be programmed into the
+ * qos field of the channel's TCHAN_TPRI_CTRL register.
+ *
+ * @tx_orderid: UDMAP transmit channel bus order id value to be programmed into
+ * the orderid field of the channel's TCHAN_TPRI_CTRL register.
+ *
+ * @fdepth: UDMAP transmit channel FIFO depth configuration to be programmed
+ * into the fdepth field of the TCHAN_TFIFO_DEPTH register. Sets the number of
+ * Tx FIFO bytes which are allowed to be stored for the channel. Check the UDMAP
+ * section of the TRM for restrictions regarding this parameter.
+ *
+ * @tx_sched_priority: UDMAP transmit channel tx scheduling priority
+ * configuration to be programmed into the priority field of the channel's
+ * TCHAN_TST_SCHED register.
+ *
+ * @tx_burst_size: UDMAP transmit channel burst size configuration to be
+ * programmed into the tx_burst_size field of the TCHAN_TCFG register.
+ *
+ * @tx_tdtype: UDMAP transmit channel teardown type configuration to be
+ * programmed into the tdtype field of the TCHAN_TCFG register:
+ * 0 - Return immediately
+ * 1 - Wait for completion message from remote peer
+ *
+ * @extended_ch_type: Valid for BCDMA.
+ * 0 - the channel is split tx channel (tchan)
+ * 1 - the channel is block copy channel (bchan)
+ */
+struct ti_sci_msg_rm_udmap_tx_ch_cfg_req {
+	struct ti_sci_msg_hdr hdr;
+	u32 valid_params;
+	u16 nav_id;
+	u16 index;
+	u8 tx_pause_on_err;
+	u8 tx_filt_einfo;
+	u8 tx_filt_pswords;
+	u8 tx_atype;
+	u8 tx_chan_type;
+	u8 tx_supr_tdpkt;
+	u16 tx_fetch_size;
+	u8 tx_credit_count;
+	u16 txcq_qnum;
+	u8 tx_priority;
+	u8 tx_qos;
+	u8 tx_orderid;
+	u16 fdepth;
+	u8 tx_sched_priority;
+	u8 tx_burst_size;
+	u8 tx_tdtype;
+	u8 extended_ch_type;
+} __packed;
+
+/**
+ * Configures a Navigator Subsystem UDMAP receive channel
+ *
+ * Configures the non-real-time registers of a Navigator Subsystem UDMAP
+ * receive channel.  The channel index must be assigned to the host defined
+ * in the TISCI header via the RM board configuration resource assignment
+ * range list.
+ *
+ * @hdr: Generic Header
+ *
+ * @valid_params: Bitfield defining validity of rx channel configuration
+ * parameters.
+ * The rx channel configuration fields are not valid, and will not be used for
+ * ch configuration, if their corresponding valid bit is zero.
+ * Valid bit usage:
+ *    0 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_pause_on_err
+ *    1 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_atype
+ *    2 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_chan_type
+ *    3 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_fetch_size
+ *    4 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rxcq_qnum
+ *    5 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_priority
+ *    6 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_qos
+ *    7 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_orderid
+ *    8 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_sched_priority
+ *    9 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::flowid_start
+ *   10 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::flowid_cnt
+ *   11 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_ignore_short
+ *   12 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_ignore_long
+ *   14 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_burst_size
+ *
+ * @nav_id: SoC device ID of Navigator Subsystem where rx channel is located
+ *
+ * @index: UDMAP receive channel index.
+ *
+ * @rx_fetch_size: UDMAP receive channel number of 32-bit descriptor words to
+ * fetch configuration to be programmed into the rx_fetch_size field of the
+ * channel's RCHAN_RCFG register.
+ *
+ * @rxcq_qnum: UDMAP receive channel completion queue configuration to be
+ * programmed into the rxcq_qnum field of the RCHAN_RCQ register.
+ * The specified completion queue must be assigned to the host, or a subordinate
+ * of the host, requesting configuration of the receive channel.
+ *
+ * @rx_priority: UDMAP receive channel receive priority value to be programmed
+ * into the priority field of the channel's RCHAN_RPRI_CTRL register.
+ *
+ * @rx_qos: UDMAP receive channel receive qos value to be programmed into the
+ * qos field of the channel's RCHAN_RPRI_CTRL register.
+ *
+ * @rx_orderid: UDMAP receive channel bus order id value to be programmed into
+ * the orderid field of the channel's RCHAN_RPRI_CTRL register.
+ *
+ * @rx_sched_priority: UDMAP receive channel rx scheduling priority
+ * configuration to be programmed into the priority field of the channel's
+ * RCHAN_RST_SCHED register.
+ *
+ * @flowid_start: UDMAP receive channel additional flows starting index
+ * configuration to program into the flow_start field of the RCHAN_RFLOW_RNG
+ * register. Specifies the starting index for flow IDs the receive channel is to
+ * make use of beyond the default flow. flowid_start and @ref flowid_cnt must be
+ * set as valid and configured together. The starting flow ID set by
+ * @ref flowid_cnt must be a flow index within the Navigator Subsystem's subset
+ * of flows beyond the default flows statically mapped to receive channels.
+ * The additional flows must be assigned to the host, or a subordinate of the
+ * host, requesting configuration of the receive channel.
+ *
+ * @flowid_cnt: UDMAP receive channel additional flows count configuration to
+ * program into the flowid_cnt field of the RCHAN_RFLOW_RNG register.
+ * This field specifies how many flow IDs are in the additional contiguous range
+ * of legal flow IDs for the channel.  @ref flowid_start and flowid_cnt must be
+ * set as valid and configured together. Disabling the valid_params field bit
+ * for flowid_cnt indicates no flow IDs other than the default are to be
+ * allocated and used by the receive channel. @ref flowid_start plus flowid_cnt
+ * cannot be greater than the number of receive flows in the receive channel's
+ * Navigator Subsystem.  The additional flows must be assigned to the host, or a
+ * subordinate of the host, requesting configuration of the receive channel.
+ *
+ * @rx_pause_on_err: UDMAP receive channel pause on error configuration to be
+ * programmed into the rx_pause_on_err field of the channel's RCHAN_RCFG
+ * register.
+ *
+ * @rx_atype: UDMAP receive channel non Ring Accelerator access pointer
+ * interpretation configuration to be programmed into the rx_atype field of the
+ * channel's RCHAN_RCFG register.
+ *
+ * @rx_chan_type: UDMAP receive channel functional channel type and work passing
+ * mechanism configuration to be programmed into the rx_chan_type field of the
+ * channel's RCHAN_RCFG register.
+ *
+ * @rx_ignore_short: UDMAP receive channel short packet treatment configuration
+ * to be programmed into the rx_ignore_short field of the RCHAN_RCFG register.
+ *
+ * @rx_ignore_long: UDMAP receive channel long packet treatment configuration to
+ * be programmed into the rx_ignore_long field of the RCHAN_RCFG register.
+ *
+ * @rx_burst_size: UDMAP receive channel burst size configuration to be
+ * programmed into the rx_burst_size field of the RCHAN_RCFG register.
+ */
+struct ti_sci_msg_rm_udmap_rx_ch_cfg_req {
+	struct ti_sci_msg_hdr hdr;
+	u32 valid_params;
+	u16 nav_id;
+	u16 index;
+	u16 rx_fetch_size;
+	u16 rxcq_qnum;
+	u8 rx_priority;
+	u8 rx_qos;
+	u8 rx_orderid;
+	u8 rx_sched_priority;
+	u16 flowid_start;
+	u16 flowid_cnt;
+	u8 rx_pause_on_err;
+	u8 rx_atype;
+	u8 rx_chan_type;
+	u8 rx_ignore_short;
+	u8 rx_ignore_long;
+	u8 rx_burst_size;
+} __packed;
+
+/**
+ * Configures a Navigator Subsystem UDMAP receive flow
+ *
+ * Configures a Navigator Subsystem UDMAP receive flow's registers.
+ * Configuration does not include the flow registers which handle size-based
+ * free descriptor queue routing.
+ *
+ * The flow index must be assigned to the host defined in the TISCI header via
+ * the RM board configuration resource assignment range list.
+ *
+ * @hdr: Standard TISCI header
+ *
+ * @valid_params
+ * Bitfield defining validity of rx flow configuration parameters.  The
+ * rx flow configuration fields are not valid, and will not be used for flow
+ * configuration, if their corresponding valid bit is zero.  Valid bit usage:
+ *     0 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_einfo_present
+ *     1 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_psinfo_present
+ *     2 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_error_handling
+ *     3 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_desc_type
+ *     4 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_sop_offset
+ *     5 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_qnum
+ *     6 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_hi
+ *     7 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_lo
+ *     8 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_hi
+ *     9 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_lo
+ *    10 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_hi_sel
+ *    11 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_lo_sel
+ *    12 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_hi_sel
+ *    13 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_lo_sel
+ *    14 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq0_sz0_qnum
+ *    15 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq1_sz0_qnum
+ *    16 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq2_sz0_qnum
+ *    17 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq3_sz0_qnum
+ *    18 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_ps_location
+ *
+ * @nav_id: SoC device ID of Navigator Subsystem from which the receive flow is
+ * allocated
+ *
+ * @flow_index: UDMAP receive flow index for non-optional configuration.
+ *
+ * @rx_einfo_present:
+ * UDMAP receive flow extended packet info present configuration to be
+ * programmed into the rx_einfo_present field of the flow's RFLOW_RFA register.
+ *
+ * @rx_psinfo_present:
+ * UDMAP receive flow PS words present configuration to be programmed into the
+ * rx_psinfo_present field of the flow's RFLOW_RFA register.
+ *
+ * @rx_error_handling:
+ * UDMAP receive flow error handling configuration to be programmed into the
+ * rx_error_handling field of the flow's RFLOW_RFA register.
+ *
+ * @rx_desc_type:
+ * UDMAP receive flow descriptor type configuration to be programmed into the
+ * rx_desc_type field field of the flow's RFLOW_RFA register.
+ *
+ * @rx_sop_offset:
+ * UDMAP receive flow start of packet offset configuration to be programmed
+ * into the rx_sop_offset field of the RFLOW_RFA register.  See the UDMAP
+ * section of the TRM for more information on this setting.  Valid values for
+ * this field are 0-255 bytes.
+ *
+ * @rx_dest_qnum:
+ * UDMAP receive flow destination queue configuration to be programmed into the
+ * rx_dest_qnum field of the flow's RFLOW_RFA register.  The specified
+ * destination queue must be valid within the Navigator Subsystem and must be
+ * owned by the host, or a subordinate of the host, requesting allocation and
+ * configuration of the receive flow.
+ *
+ * @rx_src_tag_hi:
+ * UDMAP receive flow source tag high byte constant configuration to be
+ * programmed into the rx_src_tag_hi field of the flow's RFLOW_RFB register.
+ * See the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_src_tag_lo:
+ * UDMAP receive flow source tag low byte constant configuration to be
+ * programmed into the rx_src_tag_lo field of the flow's RFLOW_RFB register.
+ * See the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_dest_tag_hi:
+ * UDMAP receive flow destination tag high byte constant configuration to be
+ * programmed into the rx_dest_tag_hi field of the flow's RFLOW_RFB register.
+ * See the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_dest_tag_lo:
+ * UDMAP receive flow destination tag low byte constant configuration to be
+ * programmed into the rx_dest_tag_lo field of the flow's RFLOW_RFB register.
+ * See the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_src_tag_hi_sel:
+ * UDMAP receive flow source tag high byte selector configuration to be
+ * programmed into the rx_src_tag_hi_sel field of the RFLOW_RFC register.  See
+ * the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_src_tag_lo_sel:
+ * UDMAP receive flow source tag low byte selector configuration to be
+ * programmed into the rx_src_tag_lo_sel field of the RFLOW_RFC register.  See
+ * the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_dest_tag_hi_sel:
+ * UDMAP receive flow destination tag high byte selector configuration to be
+ * programmed into the rx_dest_tag_hi_sel field of the RFLOW_RFC register.  See
+ * the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_dest_tag_lo_sel:
+ * UDMAP receive flow destination tag low byte selector configuration to be
+ * programmed into the rx_dest_tag_lo_sel field of the RFLOW_RFC register.  See
+ * the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_fdq0_sz0_qnum:
+ * UDMAP receive flow free descriptor queue 0 configuration to be programmed
+ * into the rx_fdq0_sz0_qnum field of the flow's RFLOW_RFD register.  See the
+ * UDMAP section of the TRM for more information on this setting. The specified
+ * free queue must be valid within the Navigator Subsystem and must be owned
+ * by the host, or a subordinate of the host, requesting allocation and
+ * configuration of the receive flow.
+ *
+ * @rx_fdq1_qnum:
+ * UDMAP receive flow free descriptor queue 1 configuration to be programmed
+ * into the rx_fdq1_qnum field of the flow's RFLOW_RFD register.  See the
+ * UDMAP section of the TRM for more information on this setting.  The specified
+ * free queue must be valid within the Navigator Subsystem and must be owned
+ * by the host, or a subordinate of the host, requesting allocation and
+ * configuration of the receive flow.
+ *
+ * @rx_fdq2_qnum:
+ * UDMAP receive flow free descriptor queue 2 configuration to be programmed
+ * into the rx_fdq2_qnum field of the flow's RFLOW_RFE register.  See the
+ * UDMAP section of the TRM for more information on this setting.  The specified
+ * free queue must be valid within the Navigator Subsystem and must be owned
+ * by the host, or a subordinate of the host, requesting allocation and
+ * configuration of the receive flow.
+ *
+ * @rx_fdq3_qnum:
+ * UDMAP receive flow free descriptor queue 3 configuration to be programmed
+ * into the rx_fdq3_qnum field of the flow's RFLOW_RFE register.  See the
+ * UDMAP section of the TRM for more information on this setting.  The specified
+ * free queue must be valid within the Navigator Subsystem and must be owned
+ * by the host, or a subordinate of the host, requesting allocation and
+ * configuration of the receive flow.
+ *
+ * @rx_ps_location:
+ * UDMAP receive flow PS words location configuration to be programmed into the
+ * rx_ps_location field of the flow's RFLOW_RFA register.
+ */
+struct ti_sci_msg_rm_udmap_flow_cfg_req {
+	struct ti_sci_msg_hdr hdr;
+	u32 valid_params;
+	u16 nav_id;
+	u16 flow_index;
+	u8 rx_einfo_present;
+	u8 rx_psinfo_present;
+	u8 rx_error_handling;
+	u8 rx_desc_type;
+	u16 rx_sop_offset;
+	u16 rx_dest_qnum;
+	u8 rx_src_tag_hi;
+	u8 rx_src_tag_lo;
+	u8 rx_dest_tag_hi;
+	u8 rx_dest_tag_lo;
+	u8 rx_src_tag_hi_sel;
+	u8 rx_src_tag_lo_sel;
+	u8 rx_dest_tag_hi_sel;
+	u8 rx_dest_tag_lo_sel;
+	u16 rx_fdq0_sz0_qnum;
+	u16 rx_fdq1_qnum;
+	u16 rx_fdq2_qnum;
+	u16 rx_fdq3_qnum;
+	u8 rx_ps_location;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_proc_request - Request a processor
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor being requested
+ *
+ * Request type is TI_SCI_MSG_PROC_REQUEST, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_proc_request {
+	struct ti_sci_msg_hdr hdr;
+	u8 processor_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_proc_release - Release a processor
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor being released
+ *
+ * Request type is TI_SCI_MSG_PROC_RELEASE, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_proc_release {
+	struct ti_sci_msg_hdr hdr;
+	u8 processor_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_proc_handover - Handover a processor to a host
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor being handed over
+ * @host_id:		Host ID the control needs to be transferred to
+ *
+ * Request type is TI_SCI_MSG_PROC_HANDOVER, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_proc_handover {
+	struct ti_sci_msg_hdr hdr;
+	u8 processor_id;
+	u8 host_id;
+} __packed;
+
+/* Boot Vector masks */
+#define TI_SCI_ADDR_LOW_MASK			GENMASK_ULL(31, 0)
+#define TI_SCI_ADDR_HIGH_MASK			GENMASK_ULL(63, 32)
+#define TI_SCI_ADDR_HIGH_SHIFT			32
+
+/**
+ * struct ti_sci_msg_req_set_config - Set Processor boot configuration
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor being configured
+ * @bootvector_low:	Lower 32 bit address (Little Endian) of boot vector
+ * @bootvector_high:	Higher 32 bit address (Little Endian) of boot vector
+ * @config_flags_set:	Optional Processor specific Config Flags to set.
+ *			Setting a bit here implies the corresponding mode
+ *			will be set
+ * @config_flags_clear:	Optional Processor specific Config Flags to clear.
+ *			Setting a bit here implies the corresponding mode
+ *			will be cleared
+ *
+ * Request type is TI_SCI_MSG_PROC_HANDOVER, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_set_config {
+	struct ti_sci_msg_hdr hdr;
+	u8 processor_id;
+	u32 bootvector_low;
+	u32 bootvector_high;
+	u32 config_flags_set;
+	u32 config_flags_clear;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_ctrl - Set Processor boot control flags
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor being configured
+ * @control_flags_set:	Optional Processor specific Control Flags to set.
+ *			Setting a bit here implies the corresponding mode
+ *			will be set
+ * @control_flags_clear:Optional Processor specific Control Flags to clear.
+ *			Setting a bit here implies the corresponding mode
+ *			will be cleared
+ *
+ * Request type is TI_SCI_MSG_SET_CTRL, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_set_ctrl {
+	struct ti_sci_msg_hdr hdr;
+	u8 processor_id;
+	u32 control_flags_set;
+	u32 control_flags_clear;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_status - Processor boot status request
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor whose status is being requested
+ *
+ * Request type is TI_SCI_MSG_GET_STATUS, response is an appropriate
+ * message, or NACK in case of inability to satisfy request.
+ */
+struct ti_sci_msg_req_get_status {
+	struct ti_sci_msg_hdr hdr;
+	u8 processor_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_status - Processor boot status response
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor whose status is returned
+ * @bootvector_low:	Lower 32 bit address (Little Endian) of boot vector
+ * @bootvector_high:	Higher 32 bit address (Little Endian) of boot vector
+ * @config_flags:	Optional Processor specific Config Flags set currently
+ * @control_flags:	Optional Processor specific Control Flags set currently
+ * @status_flags:	Optional Processor specific Status Flags set currently
+ *
+ * Response structure to a TI_SCI_MSG_GET_STATUS request.
+ */
+struct ti_sci_msg_resp_get_status {
+	struct ti_sci_msg_hdr hdr;
+	u8 processor_id;
+	u32 bootvector_low;
+	u32 bootvector_high;
+	u32 config_flags;
+	u32 control_flags;
+	u32 status_flags;
+} __packed;
+
+#endif /* __TI_SCI_H */