Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

5 files changed, 780 insertions, 0 deletions

diff --git a/drivers/gpu/drm/tve200/Kconfig b/drivers/gpu/drm/tve200/Kconfig
new file mode 100644
index 000000000..11e865be8
--- /dev/null
+++ b/drivers/gpu/drm/tve200/Kconfig
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config DRM_TVE200
+	tristate "DRM Support for Faraday TV Encoder TVE200"
+	depends on DRM
+	depends on CMA
+	depends on ARM || COMPILE_TEST
+	depends on OF
+	select DRM_BRIDGE
+	select DRM_PANEL_BRIDGE
+	select DRM_KMS_HELPER
+	select DRM_GEM_DMA_HELPER
+	select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
+	help
+	  Choose this option for DRM support for the Faraday TV Encoder
+	  TVE200 Controller.
+	  If M is selected the module will be called tve200_drm.
diff --git a/drivers/gpu/drm/tve200/Makefile b/drivers/gpu/drm/tve200/Makefile
new file mode 100644
index 000000000..69948ed26
--- /dev/null
+++ b/drivers/gpu/drm/tve200/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-only
+tve200_drm-y +=	tve200_display.o \
+		tve200_drv.o
+
+obj-$(CONFIG_DRM_TVE200) += tve200_drm.o
diff --git a/drivers/gpu/drm/tve200/tve200_display.c b/drivers/gpu/drm/tve200/tve200_display.c
new file mode 100644
index 000000000..37bdd976a
--- /dev/null
+++ b/drivers/gpu/drm/tve200/tve200_display.c
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Parts of this file were based on sources as follows:
+ *
+ * Copyright (C) 2006-2008 Intel Corporation
+ * Copyright (C) 2007 Amos Lee <amos_lee@storlinksemi.com>
+ * Copyright (C) 2007 Dave Airlie <airlied@linux.ie>
+ * Copyright (C) 2011 Texas Instruments
+ * Copyright (C) 2017 Eric Anholt
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-buf.h>
+#include <linux/of_graph.h>
+#include <linux/delay.h>
+
+#include <drm/drm_fb_dma_helper.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_framebuffer.h>
+#include <drm/drm_gem_atomic_helper.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_vblank.h>
+
+#include "tve200_drm.h"
+
+irqreturn_t tve200_irq(int irq, void *data)
+{
+	struct tve200_drm_dev_private *priv = data;
+	u32 stat;
+	u32 val;
+
+	stat = readl(priv->regs + TVE200_INT_STAT);
+
+	if (!stat)
+		return IRQ_NONE;
+
+	/*
+	 * Vblank IRQ
+	 *
+	 * The hardware is a bit tilted: the line stays high after clearing
+	 * the vblank IRQ, firing many more interrupts. We counter this
+	 * by toggling the IRQ back and forth from firing at vblank and
+	 * firing at start of active image, which works around the problem
+	 * since those occur strictly in sequence, and we get two IRQs for each
+	 * frame, one at start of Vblank (that we make call into the CRTC) and
+	 * another one at the start of the image (that we discard).
+	 */
+	if (stat & TVE200_INT_V_STATUS) {
+		val = readl(priv->regs + TVE200_CTRL);
+		/* We have an actual start of vsync */
+		if (!(val & TVE200_VSTSTYPE_BITS)) {
+			drm_crtc_handle_vblank(&priv->pipe.crtc);
+			/* Toggle trigger to start of active image */
+			val |= TVE200_VSTSTYPE_VAI;
+		} else {
+			/* Toggle trigger back to start of vsync */
+			val &= ~TVE200_VSTSTYPE_BITS;
+		}
+		writel(val, priv->regs + TVE200_CTRL);
+	} else
+		dev_err(priv->drm->dev, "stray IRQ %08x\n", stat);
+
+	/* Clear the interrupt once done */
+	writel(stat, priv->regs + TVE200_INT_CLR);
+
+	return IRQ_HANDLED;
+}
+
+static int tve200_display_check(struct drm_simple_display_pipe *pipe,
+			       struct drm_plane_state *pstate,
+			       struct drm_crtc_state *cstate)
+{
+	const struct drm_display_mode *mode = &cstate->mode;
+	struct drm_framebuffer *old_fb = pipe->plane.state->fb;
+	struct drm_framebuffer *fb = pstate->fb;
+
+	/*
+	 * We support these specific resolutions and nothing else.
+	 */
+	if (!(mode->hdisplay == 352 && mode->vdisplay == 240) && /* SIF(525) */
+	    !(mode->hdisplay == 352 && mode->vdisplay == 288) && /* CIF(625) */
+	    !(mode->hdisplay == 640 && mode->vdisplay == 480) && /* VGA */
+	    !(mode->hdisplay == 720 && mode->vdisplay == 480) && /* D1 */
+	    !(mode->hdisplay == 720 && mode->vdisplay == 576)) { /* D1 */
+		DRM_DEBUG_KMS("unsupported display mode (%u x %u)\n",
+			mode->hdisplay, mode->vdisplay);
+		return -EINVAL;
+	}
+
+	if (fb) {
+		u32 offset = drm_fb_dma_get_gem_addr(fb, pstate, 0);
+
+		/* FB base address must be dword aligned. */
+		if (offset & 3) {
+			DRM_DEBUG_KMS("FB not 32-bit aligned\n");
+			return -EINVAL;
+		}
+
+		/*
+		 * There's no pitch register, the mode's hdisplay
+		 * controls this.
+		 */
+		if (fb->pitches[0] != mode->hdisplay * fb->format->cpp[0]) {
+			DRM_DEBUG_KMS("can't handle pitches\n");
+			return -EINVAL;
+		}
+
+		/*
+		 * We can't change the FB format in a flicker-free
+		 * manner (and only update it during CRTC enable).
+		 */
+		if (old_fb && old_fb->format != fb->format)
+			cstate->mode_changed = true;
+	}
+
+	return 0;
+}
+
+static void tve200_display_enable(struct drm_simple_display_pipe *pipe,
+				 struct drm_crtc_state *cstate,
+				 struct drm_plane_state *plane_state)
+{
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_plane *plane = &pipe->plane;
+	struct drm_device *drm = crtc->dev;
+	struct tve200_drm_dev_private *priv = drm->dev_private;
+	const struct drm_display_mode *mode = &cstate->mode;
+	struct drm_framebuffer *fb = plane->state->fb;
+	struct drm_connector *connector = priv->connector;
+	u32 format = fb->format->format;
+	u32 ctrl1 = 0;
+	int retries;
+
+	clk_prepare_enable(priv->clk);
+
+	/* Reset the TVE200 and wait for it to come back online */
+	writel(TVE200_CTRL_4_RESET, priv->regs + TVE200_CTRL_4);
+	for (retries = 0; retries < 5; retries++) {
+		usleep_range(30000, 50000);
+		if (readl(priv->regs + TVE200_CTRL_4) & TVE200_CTRL_4_RESET)
+			continue;
+		else
+			break;
+	}
+	if (retries == 5 &&
+	    readl(priv->regs + TVE200_CTRL_4) & TVE200_CTRL_4_RESET) {
+		dev_err(drm->dev, "can't get hardware out of reset\n");
+		return;
+	}
+
+	/* Function 1 */
+	ctrl1 |= TVE200_CTRL_CSMODE;
+	/* Interlace mode for CCIR656: parameterize? */
+	ctrl1 |= TVE200_CTRL_NONINTERLACE;
+	/* 32 words per burst */
+	ctrl1 |= TVE200_CTRL_BURST_32_WORDS;
+	/* 16 retries */
+	ctrl1 |= TVE200_CTRL_RETRYCNT_16;
+	/* NTSC mode: parametrize? */
+	ctrl1 |= TVE200_CTRL_NTSC;
+
+	/* Vsync IRQ at start of Vsync at first */
+	ctrl1 |= TVE200_VSTSTYPE_VSYNC;
+
+	if (connector->display_info.bus_flags &
+	    DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
+		ctrl1 |= TVE200_CTRL_TVCLKP;
+
+	if ((mode->hdisplay == 352 && mode->vdisplay == 240) || /* SIF(525) */
+	    (mode->hdisplay == 352 && mode->vdisplay == 288)) { /* CIF(625) */
+		ctrl1 |= TVE200_CTRL_IPRESOL_CIF;
+		dev_info(drm->dev, "CIF mode\n");
+	} else if (mode->hdisplay == 640 && mode->vdisplay == 480) {
+		ctrl1 |= TVE200_CTRL_IPRESOL_VGA;
+		dev_info(drm->dev, "VGA mode\n");
+	} else if ((mode->hdisplay == 720 && mode->vdisplay == 480) ||
+		   (mode->hdisplay == 720 && mode->vdisplay == 576)) {
+		ctrl1 |= TVE200_CTRL_IPRESOL_D1;
+		dev_info(drm->dev, "D1 mode\n");
+	}
+
+	if (format & DRM_FORMAT_BIG_ENDIAN) {
+		ctrl1 |= TVE200_CTRL_BBBP;
+		format &= ~DRM_FORMAT_BIG_ENDIAN;
+	}
+
+	switch (format) {
+	case DRM_FORMAT_XRGB8888:
+		ctrl1 |= TVE200_IPDMOD_RGB888;
+		break;
+	case DRM_FORMAT_RGB565:
+		ctrl1 |= TVE200_IPDMOD_RGB565;
+		break;
+	case DRM_FORMAT_XRGB1555:
+		ctrl1 |= TVE200_IPDMOD_RGB555;
+		break;
+	case DRM_FORMAT_XBGR8888:
+		ctrl1 |= TVE200_IPDMOD_RGB888 | TVE200_BGR;
+		break;
+	case DRM_FORMAT_BGR565:
+		ctrl1 |= TVE200_IPDMOD_RGB565 | TVE200_BGR;
+		break;
+	case DRM_FORMAT_XBGR1555:
+		ctrl1 |= TVE200_IPDMOD_RGB555 | TVE200_BGR;
+		break;
+	case DRM_FORMAT_YUYV:
+		ctrl1 |= TVE200_IPDMOD_YUV422;
+		ctrl1 |= TVE200_CTRL_YCBCRODR_CR0Y1CB0Y0;
+		break;
+	case DRM_FORMAT_YVYU:
+		ctrl1 |= TVE200_IPDMOD_YUV422;
+		ctrl1 |= TVE200_CTRL_YCBCRODR_CB0Y1CR0Y0;
+		break;
+	case DRM_FORMAT_UYVY:
+		ctrl1 |= TVE200_IPDMOD_YUV422;
+		ctrl1 |= TVE200_CTRL_YCBCRODR_Y1CR0Y0CB0;
+		break;
+	case DRM_FORMAT_VYUY:
+		ctrl1 |= TVE200_IPDMOD_YUV422;
+		ctrl1 |= TVE200_CTRL_YCBCRODR_Y1CB0Y0CR0;
+		break;
+	case DRM_FORMAT_YUV420:
+		ctrl1 |= TVE200_CTRL_YUV420;
+		ctrl1 |= TVE200_IPDMOD_YUV420;
+		break;
+	default:
+		dev_err(drm->dev, "Unknown FB format 0x%08x\n",
+			fb->format->format);
+		break;
+	}
+
+	ctrl1 |= TVE200_TVEEN;
+
+	/* Turn it on */
+	writel(ctrl1, priv->regs + TVE200_CTRL);
+
+	drm_crtc_vblank_on(crtc);
+}
+
+static void tve200_display_disable(struct drm_simple_display_pipe *pipe)
+{
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_device *drm = crtc->dev;
+	struct tve200_drm_dev_private *priv = drm->dev_private;
+
+	drm_crtc_vblank_off(crtc);
+
+	/* Disable put into reset and Power Down */
+	writel(0, priv->regs + TVE200_CTRL);
+	writel(TVE200_CTRL_4_RESET, priv->regs + TVE200_CTRL_4);
+
+	clk_disable_unprepare(priv->clk);
+}
+
+static void tve200_display_update(struct drm_simple_display_pipe *pipe,
+				 struct drm_plane_state *old_pstate)
+{
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_device *drm = crtc->dev;
+	struct tve200_drm_dev_private *priv = drm->dev_private;
+	struct drm_pending_vblank_event *event = crtc->state->event;
+	struct drm_plane *plane = &pipe->plane;
+	struct drm_plane_state *pstate = plane->state;
+	struct drm_framebuffer *fb = pstate->fb;
+
+	if (fb) {
+		/* For RGB, the Y component is used as base address */
+		writel(drm_fb_dma_get_gem_addr(fb, pstate, 0),
+		       priv->regs + TVE200_Y_FRAME_BASE_ADDR);
+
+		/* For three plane YUV we need two more addresses */
+		if (fb->format->format == DRM_FORMAT_YUV420) {
+			writel(drm_fb_dma_get_gem_addr(fb, pstate, 1),
+			       priv->regs + TVE200_U_FRAME_BASE_ADDR);
+			writel(drm_fb_dma_get_gem_addr(fb, pstate, 2),
+			       priv->regs + TVE200_V_FRAME_BASE_ADDR);
+		}
+	}
+
+	if (event) {
+		crtc->state->event = NULL;
+
+		spin_lock_irq(&crtc->dev->event_lock);
+		if (crtc->state->active && drm_crtc_vblank_get(crtc) == 0)
+			drm_crtc_arm_vblank_event(crtc, event);
+		else
+			drm_crtc_send_vblank_event(crtc, event);
+		spin_unlock_irq(&crtc->dev->event_lock);
+	}
+}
+
+static int tve200_display_enable_vblank(struct drm_simple_display_pipe *pipe)
+{
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_device *drm = crtc->dev;
+	struct tve200_drm_dev_private *priv = drm->dev_private;
+
+	/* Clear any IRQs and enable */
+	writel(0xFF, priv->regs + TVE200_INT_CLR);
+	writel(TVE200_INT_V_STATUS, priv->regs + TVE200_INT_EN);
+	return 0;
+}
+
+static void tve200_display_disable_vblank(struct drm_simple_display_pipe *pipe)
+{
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_device *drm = crtc->dev;
+	struct tve200_drm_dev_private *priv = drm->dev_private;
+
+	writel(0, priv->regs + TVE200_INT_EN);
+}
+
+static const struct drm_simple_display_pipe_funcs tve200_display_funcs = {
+	.check = tve200_display_check,
+	.enable = tve200_display_enable,
+	.disable = tve200_display_disable,
+	.update = tve200_display_update,
+	.enable_vblank = tve200_display_enable_vblank,
+	.disable_vblank = tve200_display_disable_vblank,
+};
+
+int tve200_display_init(struct drm_device *drm)
+{
+	struct tve200_drm_dev_private *priv = drm->dev_private;
+	int ret;
+	static const u32 formats[] = {
+		DRM_FORMAT_XRGB8888,
+		DRM_FORMAT_XBGR8888,
+		DRM_FORMAT_RGB565,
+		DRM_FORMAT_BGR565,
+		DRM_FORMAT_XRGB1555,
+		DRM_FORMAT_XBGR1555,
+		/*
+		 * The controller actually supports any YCbCr ordering,
+		 * for packed YCbCr. This just lists the orderings that
+		 * DRM supports.
+		 */
+		DRM_FORMAT_YUYV,
+		DRM_FORMAT_YVYU,
+		DRM_FORMAT_UYVY,
+		DRM_FORMAT_VYUY,
+		/* This uses three planes */
+		DRM_FORMAT_YUV420,
+	};
+
+	ret = drm_simple_display_pipe_init(drm, &priv->pipe,
+					   &tve200_display_funcs,
+					   formats, ARRAY_SIZE(formats),
+					   NULL,
+					   priv->connector);
+	if (ret)
+		return ret;
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/tve200/tve200_drm.h b/drivers/gpu/drm/tve200/tve200_drm.h
new file mode 100644
index 000000000..5420b52ea
--- /dev/null
+++ b/drivers/gpu/drm/tve200/tve200_drm.h
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Parts of this file were based on sources as follows:
+ *
+ * Copyright (C) 2006-2008 Intel Corporation
+ * Copyright (C) 2007 Amos Lee <amos_lee@storlinksemi.com>
+ * Copyright (C) 2007 Dave Airlie <airlied@linux.ie>
+ * Copyright (C) 2011 Texas Instruments
+ * Copyright (C) 2017 Eric Anholt
+ */
+
+#ifndef _TVE200_DRM_H_
+#define _TVE200_DRM_H_
+
+#include <linux/irqreturn.h>
+
+#include <drm/drm_simple_kms_helper.h>
+
+struct clk;
+struct drm_bridge;
+struct drm_connector;
+struct drm_device;
+struct drm_file;
+struct drm_mode_create_dumb;
+struct drm_panel;
+
+/* Bits 2-31 are valid physical base addresses */
+#define TVE200_Y_FRAME_BASE_ADDR	0x00
+#define TVE200_U_FRAME_BASE_ADDR	0x04
+#define TVE200_V_FRAME_BASE_ADDR	0x08
+
+#define TVE200_INT_EN			0x0C
+#define TVE200_INT_CLR			0x10
+#define TVE200_INT_STAT			0x14
+#define TVE200_INT_BUS_ERR		BIT(7)
+#define TVE200_INT_V_STATUS		BIT(6) /* vertical blank */
+#define TVE200_INT_V_NEXT_FRAME		BIT(5)
+#define TVE200_INT_U_NEXT_FRAME		BIT(4)
+#define TVE200_INT_Y_NEXT_FRAME		BIT(3)
+#define TVE200_INT_V_FIFO_UNDERRUN	BIT(2)
+#define TVE200_INT_U_FIFO_UNDERRUN	BIT(1)
+#define TVE200_INT_Y_FIFO_UNDERRUN	BIT(0)
+#define TVE200_FIFO_UNDERRUNS		(TVE200_INT_V_FIFO_UNDERRUN | \
+					 TVE200_INT_U_FIFO_UNDERRUN | \
+					 TVE200_INT_Y_FIFO_UNDERRUN)
+
+#define TVE200_CTRL			0x18
+#define TVE200_CTRL_YUV420		BIT(31)
+#define TVE200_CTRL_CSMODE		BIT(30)
+#define TVE200_CTRL_NONINTERLACE	BIT(28) /* 0 = non-interlace CCIR656 */
+#define TVE200_CTRL_TVCLKP		BIT(27) /* Inverted clock phase */
+/* Bits 24..26 define the burst size after arbitration on the bus */
+#define TVE200_CTRL_BURST_4_WORDS	(0 << 24)
+#define TVE200_CTRL_BURST_8_WORDS	(1 << 24)
+#define TVE200_CTRL_BURST_16_WORDS	(2 << 24)
+#define TVE200_CTRL_BURST_32_WORDS	(3 << 24)
+#define TVE200_CTRL_BURST_64_WORDS	(4 << 24)
+#define TVE200_CTRL_BURST_128_WORDS	(5 << 24)
+#define TVE200_CTRL_BURST_256_WORDS	(6 << 24)
+#define TVE200_CTRL_BURST_0_WORDS	(7 << 24) /* ? */
+/*
+ * Bits 16..23 is the retry count*16 before issueing a new AHB transfer
+ * on the AHB bus.
+ */
+#define TVE200_CTRL_RETRYCNT_MASK	GENMASK(23, 16)
+#define TVE200_CTRL_RETRYCNT_16		(1 << 16)
+#define TVE200_CTRL_BBBP		BIT(15) /* 0 = little-endian */
+/* Bits 12..14 define the YCbCr ordering */
+#define TVE200_CTRL_YCBCRODR_CB0Y0CR0Y1	(0 << 12)
+#define TVE200_CTRL_YCBCRODR_Y0CB0Y1CR0	(1 << 12)
+#define TVE200_CTRL_YCBCRODR_CR0Y0CB0Y1	(2 << 12)
+#define TVE200_CTRL_YCBCRODR_Y1CB0Y0CR0	(3 << 12)
+#define TVE200_CTRL_YCBCRODR_CR0Y1CB0Y0	(4 << 12)
+#define TVE200_CTRL_YCBCRODR_Y1CR0Y0CB0	(5 << 12)
+#define TVE200_CTRL_YCBCRODR_CB0Y1CR0Y0	(6 << 12)
+#define TVE200_CTRL_YCBCRODR_Y0CR0Y1CB0	(7 << 12)
+/* Bits 10..11 define the input resolution (framebuffer size) */
+#define TVE200_CTRL_IPRESOL_CIF		(0 << 10)
+#define TVE200_CTRL_IPRESOL_VGA		(1 << 10)
+#define TVE200_CTRL_IPRESOL_D1		(2 << 10)
+#define TVE200_CTRL_NTSC		BIT(9) /* 0 = PAL, 1 = NTSC */
+#define TVE200_CTRL_INTERLACE		BIT(8) /* 1 = interlace, only for D1 */
+#define TVE200_IPDMOD_RGB555		(0 << 6) /* TVE200_CTRL_YUV420 = 0 */
+#define TVE200_IPDMOD_RGB565		(1 << 6)
+#define TVE200_IPDMOD_RGB888		(2 << 6)
+#define TVE200_IPDMOD_YUV420		(2 << 6) /* TVE200_CTRL_YUV420 = 1 */
+#define TVE200_IPDMOD_YUV422		(3 << 6)
+/* Bits 4 & 5 define when to fire the vblank IRQ */
+#define TVE200_VSTSTYPE_VSYNC		(0 << 4) /* start of vsync */
+#define TVE200_VSTSTYPE_VBP		(1 << 4) /* start of v back porch */
+#define TVE200_VSTSTYPE_VAI		(2 << 4) /* start of v active image */
+#define TVE200_VSTSTYPE_VFP		(3 << 4) /* start of v front porch */
+#define TVE200_VSTSTYPE_BITS		(BIT(4) | BIT(5))
+#define TVE200_BGR			BIT(1) /* 0 = RGB, 1 = BGR */
+#define TVE200_TVEEN			BIT(0) /* Enable TVE block */
+
+#define TVE200_CTRL_2			0x1c
+#define TVE200_CTRL_3			0x20
+
+#define TVE200_CTRL_4			0x24
+#define TVE200_CTRL_4_RESET		BIT(0) /* triggers reset of TVE200 */
+
+struct tve200_drm_dev_private {
+	struct drm_device *drm;
+
+	struct drm_connector *connector;
+	struct drm_panel *panel;
+	struct drm_bridge *bridge;
+	struct drm_simple_display_pipe pipe;
+
+	void *regs;
+	struct clk *pclk;
+	struct clk *clk;
+};
+
+#define to_tve200_connector(x) \
+	container_of(x, struct tve200_drm_connector, connector)
+
+int tve200_display_init(struct drm_device *dev);
+irqreturn_t tve200_irq(int irq, void *data);
+int tve200_connector_init(struct drm_device *dev);
+int tve200_encoder_init(struct drm_device *dev);
+int tve200_dumb_create(struct drm_file *file_priv,
+		      struct drm_device *dev,
+		      struct drm_mode_create_dumb *args);
+
+#endif /* _TVE200_DRM_H_ */
diff --git a/drivers/gpu/drm/tve200/tve200_drv.c b/drivers/gpu/drm/tve200/tve200_drv.c
new file mode 100644
index 000000000..04db72e3f
--- /dev/null
+++ b/drivers/gpu/drm/tve200/tve200_drv.c
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Parts of this file were based on sources as follows:
+ *
+ * Copyright (C) 2006-2008 Intel Corporation
+ * Copyright (C) 2007 Amos Lee <amos_lee@storlinksemi.com>
+ * Copyright (C) 2007 Dave Airlie <airlied@linux.ie>
+ * Copyright (C) 2011 Texas Instruments
+ * Copyright (C) 2017 Eric Anholt
+ */
+
+/**
+ * DOC: Faraday TV Encoder TVE200 DRM Driver
+ *
+ * The Faraday TV Encoder TVE200 is also known as the Gemini TV Interface
+ * Controller (TVC) and is found in the Gemini Chipset from Storlink
+ * Semiconductor (later Storm Semiconductor, later Cortina Systems)
+ * but also in the Grain Media GM8180 chipset. On the Gemini the module
+ * is connected to 8 data lines and a single clock line, comprising an
+ * 8-bit BT.656 interface.
+ *
+ * This is a very basic YUV display driver. The datasheet specifies that
+ * it supports the ITU BT.656 standard. It requires a 27 MHz clock which is
+ * the hallmark of any TV encoder supporting both PAL and NTSC.
+ *
+ * This driver exposes a standard KMS interface for this TV encoder.
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-buf.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/shmem_fs.h>
+#include <linux/slab.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_module.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_vblank.h>
+
+#include "tve200_drm.h"
+
+#define DRIVER_DESC      "DRM module for Faraday TVE200"
+
+static const struct drm_mode_config_funcs mode_config_funcs = {
+	.fb_create = drm_gem_fb_create,
+	.atomic_check = drm_atomic_helper_check,
+	.atomic_commit = drm_atomic_helper_commit,
+};
+
+static int tve200_modeset_init(struct drm_device *dev)
+{
+	struct drm_mode_config *mode_config;
+	struct tve200_drm_dev_private *priv = dev->dev_private;
+	struct drm_panel *panel;
+	struct drm_bridge *bridge;
+	int ret;
+
+	drm_mode_config_init(dev);
+	mode_config = &dev->mode_config;
+	mode_config->funcs = &mode_config_funcs;
+	mode_config->min_width = 352;
+	mode_config->max_width = 720;
+	mode_config->min_height = 240;
+	mode_config->max_height = 576;
+
+	ret = drm_of_find_panel_or_bridge(dev->dev->of_node,
+					  0, 0, &panel, &bridge);
+	if (ret && ret != -ENODEV)
+		return ret;
+	if (panel) {
+		bridge = drm_panel_bridge_add_typed(panel,
+						    DRM_MODE_CONNECTOR_Unknown);
+		if (IS_ERR(bridge)) {
+			ret = PTR_ERR(bridge);
+			goto out_bridge;
+		}
+	} else {
+		/*
+		 * TODO: when we are using a different bridge than a panel
+		 * (such as a dumb VGA connector) we need to devise a different
+		 * method to get the connector out of the bridge.
+		 */
+		dev_err(dev->dev, "the bridge is not a panel\n");
+		ret = -EINVAL;
+		goto out_bridge;
+	}
+
+	ret = tve200_display_init(dev);
+	if (ret) {
+		dev_err(dev->dev, "failed to init display\n");
+		goto out_bridge;
+	}
+
+	ret = drm_simple_display_pipe_attach_bridge(&priv->pipe,
+						    bridge);
+	if (ret) {
+		dev_err(dev->dev, "failed to attach bridge\n");
+		goto out_bridge;
+	}
+
+	priv->panel = panel;
+	priv->connector = drm_panel_bridge_connector(bridge);
+	priv->bridge = bridge;
+
+	dev_info(dev->dev, "attached to panel %s\n",
+		 dev_name(panel->dev));
+
+	ret = drm_vblank_init(dev, 1);
+	if (ret) {
+		dev_err(dev->dev, "failed to init vblank\n");
+		goto out_bridge;
+	}
+
+	drm_mode_config_reset(dev);
+	drm_kms_helper_poll_init(dev);
+
+	goto finish;
+
+out_bridge:
+	if (panel)
+		drm_panel_bridge_remove(bridge);
+	drm_mode_config_cleanup(dev);
+finish:
+	return ret;
+}
+
+DEFINE_DRM_GEM_DMA_FOPS(drm_fops);
+
+static const struct drm_driver tve200_drm_driver = {
+	.driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC,
+	.ioctls = NULL,
+	.fops = &drm_fops,
+	.name = "tve200",
+	.desc = DRIVER_DESC,
+	.date = "20170703",
+	.major = 1,
+	.minor = 0,
+	.patchlevel = 0,
+	DRM_GEM_DMA_DRIVER_OPS,
+};
+
+static int tve200_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct tve200_drm_dev_private *priv;
+	struct drm_device *drm;
+	struct resource *res;
+	int irq;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	drm = drm_dev_alloc(&tve200_drm_driver, dev);
+	if (IS_ERR(drm))
+		return PTR_ERR(drm);
+	platform_set_drvdata(pdev, drm);
+	priv->drm = drm;
+	drm->dev_private = priv;
+
+	/* Clock the silicon so we can access the registers */
+	priv->pclk = devm_clk_get(dev, "PCLK");
+	if (IS_ERR(priv->pclk)) {
+		dev_err(dev, "unable to get PCLK\n");
+		ret = PTR_ERR(priv->pclk);
+		goto dev_unref;
+	}
+	ret = clk_prepare_enable(priv->pclk);
+	if (ret) {
+		dev_err(dev, "failed to enable PCLK\n");
+		goto dev_unref;
+	}
+
+	/* This clock is for the pixels (27MHz) */
+	priv->clk = devm_clk_get(dev, "TVE");
+	if (IS_ERR(priv->clk)) {
+		dev_err(dev, "unable to get TVE clock\n");
+		ret = PTR_ERR(priv->clk);
+		goto clk_disable;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->regs)) {
+		dev_err(dev, "%s failed mmio\n", __func__);
+		ret = -EINVAL;
+		goto clk_disable;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto clk_disable;
+	}
+
+	/* turn off interrupts before requesting the irq */
+	writel(0, priv->regs + TVE200_INT_EN);
+
+	ret = devm_request_irq(dev, irq, tve200_irq, 0, "tve200", priv);
+	if (ret) {
+		dev_err(dev, "failed to request irq %d\n", ret);
+		goto clk_disable;
+	}
+
+	ret = tve200_modeset_init(drm);
+	if (ret)
+		goto clk_disable;
+
+	ret = drm_dev_register(drm, 0);
+	if (ret < 0)
+		goto clk_disable;
+
+	/*
+	 * Passing in 16 here will make the RGB565 mode the default
+	 * Passing in 32 will use XRGB8888 mode
+	 */
+	drm_fbdev_generic_setup(drm, 16);
+
+	return 0;
+
+clk_disable:
+	clk_disable_unprepare(priv->pclk);
+dev_unref:
+	drm_dev_put(drm);
+	return ret;
+}
+
+static int tve200_remove(struct platform_device *pdev)
+{
+	struct drm_device *drm = platform_get_drvdata(pdev);
+	struct tve200_drm_dev_private *priv = drm->dev_private;
+
+	drm_dev_unregister(drm);
+	if (priv->panel)
+		drm_panel_bridge_remove(priv->bridge);
+	drm_mode_config_cleanup(drm);
+	clk_disable_unprepare(priv->pclk);
+	drm_dev_put(drm);
+
+	return 0;
+}
+
+static const struct of_device_id tve200_of_match[] = {
+	{
+		.compatible = "faraday,tve200",
+	},
+	{},
+};
+
+static struct platform_driver tve200_driver = {
+	.driver = {
+		.name           = "tve200",
+		.of_match_table = of_match_ptr(tve200_of_match),
+	},
+	.probe = tve200_probe,
+	.remove = tve200_remove,
+};
+drm_module_platform_driver(tve200_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_LICENSE("GPL");