Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 514 insertions, 0 deletions

diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
new file mode 100644
index 000000000..1ac2b2f4c
--- /dev/null
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -0,0 +1,514 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ADM1266 - Cascadable Super Sequencer with Margin
+ * Control and Fault Recording
+ *
+ * Copyright 2020 Analog Devices Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/crc8.h>
+#include <linux/debugfs.h>
+#include <linux/gpio/driver.h>
+#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
+#include "pmbus.h"
+#include <linux/slab.h>
+#include <linux/timekeeping.h>
+
+#define ADM1266_BLACKBOX_CONFIG	0xD3
+#define ADM1266_PDIO_CONFIG	0xD4
+#define ADM1266_READ_STATE	0xD9
+#define ADM1266_READ_BLACKBOX	0xDE
+#define ADM1266_SET_RTC		0xDF
+#define ADM1266_GPIO_CONFIG	0xE1
+#define ADM1266_BLACKBOX_INFO	0xE6
+#define ADM1266_PDIO_STATUS	0xE9
+#define ADM1266_GPIO_STATUS	0xEA
+
+/* ADM1266 GPIO defines */
+#define ADM1266_GPIO_NR			9
+#define ADM1266_GPIO_FUNCTIONS(x)	FIELD_GET(BIT(0), x)
+#define ADM1266_GPIO_INPUT_EN(x)	FIELD_GET(BIT(2), x)
+#define ADM1266_GPIO_OUTPUT_EN(x)	FIELD_GET(BIT(3), x)
+#define ADM1266_GPIO_OPEN_DRAIN(x)	FIELD_GET(BIT(4), x)
+
+/* ADM1266 PDIO defines */
+#define ADM1266_PDIO_NR			16
+#define ADM1266_PDIO_PIN_CFG(x)		FIELD_GET(GENMASK(15, 13), x)
+#define ADM1266_PDIO_GLITCH_FILT(x)	FIELD_GET(GENMASK(12, 9), x)
+#define ADM1266_PDIO_OUT_CFG(x)		FIELD_GET(GENMASK(2, 0), x)
+
+#define ADM1266_BLACKBOX_OFFSET		0
+#define ADM1266_BLACKBOX_SIZE		64
+
+#define ADM1266_PMBUS_BLOCK_MAX		255
+
+struct adm1266_data {
+	struct pmbus_driver_info info;
+	struct gpio_chip gc;
+	const char *gpio_names[ADM1266_GPIO_NR + ADM1266_PDIO_NR];
+	struct i2c_client *client;
+	struct dentry *debugfs_dir;
+	struct nvmem_config nvmem_config;
+	struct nvmem_device *nvmem;
+	u8 *dev_mem;
+	struct mutex buf_mutex;
+	u8 write_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned;
+	u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned;
+};
+
+static const struct nvmem_cell_info adm1266_nvmem_cells[] = {
+	{
+		.name           = "blackbox",
+		.offset         = ADM1266_BLACKBOX_OFFSET,
+		.bytes          = 2048,
+	},
+};
+
+DECLARE_CRC8_TABLE(pmbus_crc_table);
+
+/*
+ * Different from Block Read as it sends data and waits for the slave to
+ * return a value dependent on that data. The protocol is simply a Write Block
+ * followed by a Read Block without the Read-Block command field and the
+ * Write-Block STOP bit.
+ */
+static int adm1266_pmbus_block_xfer(struct adm1266_data *data, u8 cmd, u8 w_len, u8 *data_w,
+				    u8 *data_r)
+{
+	struct i2c_client *client = data->client;
+	struct i2c_msg msgs[2] = {
+		{
+			.addr = client->addr,
+			.flags = I2C_M_DMA_SAFE,
+			.buf = data->write_buf,
+			.len = w_len + 2,
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD | I2C_M_DMA_SAFE,
+			.buf = data->read_buf,
+			.len = ADM1266_PMBUS_BLOCK_MAX + 2,
+		}
+	};
+	u8 addr;
+	u8 crc;
+	int ret;
+
+	mutex_lock(&data->buf_mutex);
+
+	msgs[0].buf[0] = cmd;
+	msgs[0].buf[1] = w_len;
+	memcpy(&msgs[0].buf[2], data_w, w_len);
+
+	ret = i2c_transfer(client->adapter, msgs, 2);
+	if (ret != 2) {
+		if (ret >= 0)
+			ret = -EPROTO;
+
+		mutex_unlock(&data->buf_mutex);
+
+		return ret;
+	}
+
+	if (client->flags & I2C_CLIENT_PEC) {
+		addr = i2c_8bit_addr_from_msg(&msgs[0]);
+		crc = crc8(pmbus_crc_table, &addr, 1, 0);
+		crc = crc8(pmbus_crc_table, msgs[0].buf,  msgs[0].len, crc);
+
+		addr = i2c_8bit_addr_from_msg(&msgs[1]);
+		crc = crc8(pmbus_crc_table, &addr, 1, crc);
+		crc = crc8(pmbus_crc_table, msgs[1].buf,  msgs[1].buf[0] + 1, crc);
+
+		if (crc != msgs[1].buf[msgs[1].buf[0] + 1]) {
+			mutex_unlock(&data->buf_mutex);
+			return -EBADMSG;
+		}
+	}
+
+	memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]);
+
+	ret = msgs[1].buf[0];
+	mutex_unlock(&data->buf_mutex);
+
+	return ret;
+}
+
+static const unsigned int adm1266_gpio_mapping[ADM1266_GPIO_NR][2] = {
+	{1, 0},
+	{2, 1},
+	{3, 2},
+	{4, 8},
+	{5, 9},
+	{6, 10},
+	{7, 11},
+	{8, 6},
+	{9, 7},
+};
+
+static const char *adm1266_names[ADM1266_GPIO_NR + ADM1266_PDIO_NR] = {
+	"GPIO1", "GPIO2", "GPIO3", "GPIO4", "GPIO5", "GPIO6", "GPIO7", "GPIO8",
+	"GPIO9", "PDIO1", "PDIO2", "PDIO3", "PDIO4", "PDIO5", "PDIO6",
+	"PDIO7", "PDIO8", "PDIO9", "PDIO10", "PDIO11", "PDIO12", "PDIO13",
+	"PDIO14", "PDIO15", "PDIO16",
+};
+
+static int adm1266_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct adm1266_data *data = gpiochip_get_data(chip);
+	u8 read_buf[I2C_SMBUS_BLOCK_MAX + 1];
+	unsigned long pins_status;
+	unsigned int pmbus_cmd;
+	int ret;
+
+	if (offset < ADM1266_GPIO_NR)
+		pmbus_cmd = ADM1266_GPIO_STATUS;
+	else
+		pmbus_cmd = ADM1266_PDIO_STATUS;
+
+	ret = i2c_smbus_read_block_data(data->client, pmbus_cmd, read_buf);
+	if (ret < 0)
+		return ret;
+
+	pins_status = read_buf[0] + (read_buf[1] << 8);
+	if (offset < ADM1266_GPIO_NR)
+		return test_bit(adm1266_gpio_mapping[offset][1], &pins_status);
+
+	return test_bit(offset - ADM1266_GPIO_NR, &pins_status);
+}
+
+static int adm1266_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+				     unsigned long *bits)
+{
+	struct adm1266_data *data = gpiochip_get_data(chip);
+	u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1];
+	unsigned long status;
+	unsigned int gpio_nr;
+	int ret;
+
+	ret = i2c_smbus_read_block_data(data->client, ADM1266_GPIO_STATUS, read_buf);
+	if (ret < 0)
+		return ret;
+
+	status = read_buf[0] + (read_buf[1] << 8);
+
+	*bits = 0;
+	for_each_set_bit(gpio_nr, mask, ADM1266_GPIO_NR) {
+		if (test_bit(adm1266_gpio_mapping[gpio_nr][1], &status))
+			set_bit(gpio_nr, bits);
+	}
+
+	ret = i2c_smbus_read_block_data(data->client, ADM1266_PDIO_STATUS, read_buf);
+	if (ret < 0)
+		return ret;
+
+	status = read_buf[0] + (read_buf[1] << 8);
+
+	*bits = 0;
+	for_each_set_bit_from(gpio_nr, mask, ADM1266_GPIO_NR + ADM1266_PDIO_STATUS) {
+		if (test_bit(gpio_nr - ADM1266_GPIO_NR, &status))
+			set_bit(gpio_nr, bits);
+	}
+
+	return 0;
+}
+
+static void adm1266_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	struct adm1266_data *data = gpiochip_get_data(chip);
+	u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1];
+	unsigned long gpio_config;
+	unsigned long pdio_config;
+	unsigned long pin_cfg;
+	u8 write_cmd;
+	int ret;
+	int i;
+
+	for (i = 0; i < ADM1266_GPIO_NR; i++) {
+		write_cmd = adm1266_gpio_mapping[i][1];
+		ret = adm1266_pmbus_block_xfer(data, ADM1266_GPIO_CONFIG, 1, &write_cmd, read_buf);
+		if (ret != 2)
+			return;
+
+		gpio_config = read_buf[0];
+		seq_puts(s, adm1266_names[i]);
+
+		seq_puts(s, " ( ");
+		if (!ADM1266_GPIO_FUNCTIONS(gpio_config)) {
+			seq_puts(s, "high-Z )\n");
+			continue;
+		}
+		if (ADM1266_GPIO_INPUT_EN(gpio_config))
+			seq_puts(s, "input ");
+		if (ADM1266_GPIO_OUTPUT_EN(gpio_config))
+			seq_puts(s, "output ");
+		if (ADM1266_GPIO_OPEN_DRAIN(gpio_config))
+			seq_puts(s, "open-drain )\n");
+		else
+			seq_puts(s, "push-pull )\n");
+	}
+
+	write_cmd = 0xFF;
+	ret = adm1266_pmbus_block_xfer(data, ADM1266_PDIO_CONFIG, 1, &write_cmd, read_buf);
+	if (ret != 32)
+		return;
+
+	for (i = 0; i < ADM1266_PDIO_NR; i++) {
+		seq_puts(s, adm1266_names[ADM1266_GPIO_NR + i]);
+
+		pdio_config = read_buf[2 * i];
+		pdio_config += (read_buf[2 * i + 1] << 8);
+		pin_cfg = ADM1266_PDIO_PIN_CFG(pdio_config);
+
+		seq_puts(s, " ( ");
+		if (!pin_cfg || pin_cfg > 5) {
+			seq_puts(s, "high-Z )\n");
+			continue;
+		}
+
+		if (pin_cfg & BIT(0))
+			seq_puts(s, "output ");
+
+		if (pin_cfg & BIT(1))
+			seq_puts(s, "input ");
+
+		seq_puts(s, ")\n");
+	}
+}
+
+static int adm1266_config_gpio(struct adm1266_data *data)
+{
+	const char *name = dev_name(&data->client->dev);
+	char *gpio_name;
+	int ret;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(data->gpio_names); i++) {
+		gpio_name = devm_kasprintf(&data->client->dev, GFP_KERNEL, "adm1266-%x-%s",
+					   data->client->addr, adm1266_names[i]);
+		if (!gpio_name)
+			return -ENOMEM;
+
+		data->gpio_names[i] = gpio_name;
+	}
+
+	data->gc.label = name;
+	data->gc.parent = &data->client->dev;
+	data->gc.owner = THIS_MODULE;
+	data->gc.can_sleep = true;
+	data->gc.base = -1;
+	data->gc.names = data->gpio_names;
+	data->gc.ngpio = ARRAY_SIZE(data->gpio_names);
+	data->gc.get = adm1266_gpio_get;
+	data->gc.get_multiple = adm1266_gpio_get_multiple;
+	data->gc.dbg_show = adm1266_gpio_dbg_show;
+
+	ret = devm_gpiochip_add_data(&data->client->dev, &data->gc, data);
+	if (ret)
+		dev_err(&data->client->dev, "GPIO registering failed (%d)\n", ret);
+
+	return ret;
+}
+
+static int adm1266_state_read(struct seq_file *s, void *pdata)
+{
+	struct device *dev = s->private;
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+
+	ret = i2c_smbus_read_word_data(client, ADM1266_READ_STATE);
+	if (ret < 0)
+		return ret;
+
+	seq_printf(s, "%d\n", ret);
+
+	return 0;
+}
+
+static void adm1266_init_debugfs(struct adm1266_data *data)
+{
+	struct dentry *root;
+
+	root = pmbus_get_debugfs_dir(data->client);
+	if (!root)
+		return;
+
+	data->debugfs_dir = debugfs_create_dir(data->client->name, root);
+	if (!data->debugfs_dir)
+		return;
+
+	debugfs_create_devm_seqfile(&data->client->dev, "sequencer_state", data->debugfs_dir,
+				    adm1266_state_read);
+}
+
+static int adm1266_nvmem_read_blackbox(struct adm1266_data *data, u8 *read_buff)
+{
+	int record_count;
+	char index;
+	u8 buf[5];
+	int ret;
+
+	ret = i2c_smbus_read_block_data(data->client, ADM1266_BLACKBOX_INFO, buf);
+	if (ret < 0)
+		return ret;
+
+	if (ret != 4)
+		return -EIO;
+
+	record_count = buf[3];
+
+	for (index = 0; index < record_count; index++) {
+		ret = adm1266_pmbus_block_xfer(data, ADM1266_READ_BLACKBOX, 1, &index, read_buff);
+		if (ret < 0)
+			return ret;
+
+		if (ret != ADM1266_BLACKBOX_SIZE)
+			return -EIO;
+
+		read_buff += ADM1266_BLACKBOX_SIZE;
+	}
+
+	return 0;
+}
+
+static int adm1266_nvmem_read(void *priv, unsigned int offset, void *val, size_t bytes)
+{
+	struct adm1266_data *data = priv;
+	int ret;
+
+	if (offset + bytes > data->nvmem_config.size)
+		return -EINVAL;
+
+	if (offset == 0) {
+		memset(data->dev_mem, 0, data->nvmem_config.size);
+
+		ret = adm1266_nvmem_read_blackbox(data, data->dev_mem);
+		if (ret) {
+			dev_err(&data->client->dev, "Could not read blackbox!");
+			return ret;
+		}
+	}
+
+	memcpy(val, data->dev_mem + offset, bytes);
+
+	return 0;
+}
+
+static int adm1266_config_nvmem(struct adm1266_data *data)
+{
+	data->nvmem_config.name = dev_name(&data->client->dev);
+	data->nvmem_config.dev = &data->client->dev;
+	data->nvmem_config.root_only = true;
+	data->nvmem_config.read_only = true;
+	data->nvmem_config.owner = THIS_MODULE;
+	data->nvmem_config.reg_read = adm1266_nvmem_read;
+	data->nvmem_config.cells = adm1266_nvmem_cells;
+	data->nvmem_config.ncells = ARRAY_SIZE(adm1266_nvmem_cells);
+	data->nvmem_config.priv = data;
+	data->nvmem_config.stride = 1;
+	data->nvmem_config.word_size = 1;
+	data->nvmem_config.size = adm1266_nvmem_cells[0].bytes;
+
+	data->dev_mem = devm_kzalloc(&data->client->dev, data->nvmem_config.size, GFP_KERNEL);
+	if (!data->dev_mem)
+		return -ENOMEM;
+
+	data->nvmem = devm_nvmem_register(&data->client->dev, &data->nvmem_config);
+	if (IS_ERR(data->nvmem)) {
+		dev_err(&data->client->dev, "Could not register nvmem!");
+		return PTR_ERR(data->nvmem);
+	}
+
+	return 0;
+}
+
+static int adm1266_set_rtc(struct adm1266_data *data)
+{
+	time64_t kt;
+	char write_buf[6];
+	int i;
+
+	kt = ktime_get_seconds();
+
+	memset(write_buf, 0, sizeof(write_buf));
+
+	for (i = 0; i < 4; i++)
+		write_buf[2 + i] = (kt >> (i * 8)) & 0xFF;
+
+	return i2c_smbus_write_block_data(data->client, ADM1266_SET_RTC, sizeof(write_buf),
+					  write_buf);
+}
+
+static int adm1266_probe(struct i2c_client *client)
+{
+	struct adm1266_data *data;
+	int ret;
+	int i;
+
+	data = devm_kzalloc(&client->dev, sizeof(struct adm1266_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->client = client;
+	data->info.pages = 17;
+	data->info.format[PSC_VOLTAGE_OUT] = linear;
+	for (i = 0; i < data->info.pages; i++)
+		data->info.func[i] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+
+	crc8_populate_msb(pmbus_crc_table, 0x7);
+	mutex_init(&data->buf_mutex);
+
+	ret = adm1266_config_gpio(data);
+	if (ret < 0)
+		return ret;
+
+	ret = adm1266_set_rtc(data);
+	if (ret < 0)
+		return ret;
+
+	ret = adm1266_config_nvmem(data);
+	if (ret < 0)
+		return ret;
+
+	ret = pmbus_do_probe(client, &data->info);
+	if (ret)
+		return ret;
+
+	adm1266_init_debugfs(data);
+
+	return 0;
+}
+
+static const struct of_device_id adm1266_of_match[] = {
+	{ .compatible = "adi,adm1266" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adm1266_of_match);
+
+static const struct i2c_device_id adm1266_id[] = {
+	{ "adm1266", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adm1266_id);
+
+static struct i2c_driver adm1266_driver = {
+	.driver = {
+		   .name = "adm1266",
+		   .of_match_table = adm1266_of_match,
+		  },
+	.probe_new = adm1266_probe,
+	.id_table = adm1266_id,
+};
+
+module_i2c_driver(adm1266_driver);
+
+MODULE_AUTHOR("Alexandru Tachici <alexandru.tachici@analog.com>");
+MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1266");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(PMBUS);