Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 908 insertions, 0 deletions

diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
new file mode 100644
index 000000000..b0b05fd12
--- /dev/null
+++ b/drivers/hwmon/sis5595.c
@@ -0,0 +1,908 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sis5595.c - Part of lm_sensors, Linux kernel modules
+ *	       for hardware monitoring
+ *
+ * Copyright (C) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>,
+ *			     Kyösti Mälkki <kmalkki@cc.hut.fi>, and
+ *			     Mark D. Studebaker <mdsxyz123@yahoo.com>
+ * Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with
+ * the help of Jean Delvare <jdelvare@suse.de>
+ */
+
+/*
+ * SiS southbridge has a LM78-like chip integrated on the same IC.
+ * This driver is a customized copy of lm78.c
+ *
+ * Supports following revisions:
+ *	Version		PCI ID		PCI Revision
+ *	1		1039/0008	AF or less
+ *	2		1039/0008	B0 or greater
+ *
+ *  Note: these chips contain a 0008 device which is incompatible with the
+ *	 5595. We recognize these by the presence of the listed
+ *	 "blacklist" PCI ID and refuse to load.
+ *
+ * NOT SUPPORTED	PCI ID		BLACKLIST PCI ID
+ *	 540		0008		0540
+ *	 550		0008		0550
+ *	5513		0008		5511
+ *	5581		0008		5597
+ *	5582		0008		5597
+ *	5597		0008		5597
+ *	5598		0008		5597/5598
+ *	 630		0008		0630
+ *	 645		0008		0645
+ *	 730		0008		0730
+ *	 735		0008		0735
+ */
+
+#define DRIVER_NAME "sis5595"
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+
+/*
+ * If force_addr is set to anything different from 0, we forcibly enable
+ * the device at the given address.
+ */
+static u16 force_addr;
+module_param(force_addr, ushort, 0);
+MODULE_PARM_DESC(force_addr,
+		 "Initialize the base address of the sensors");
+
+static struct platform_device *pdev;
+
+/* Many SIS5595 constants specified below */
+
+/* Length of ISA address segment */
+#define SIS5595_EXTENT 8
+/* PCI Config Registers */
+#define SIS5595_BASE_REG 0x68
+#define SIS5595_PIN_REG 0x7A
+#define SIS5595_ENABLE_REG 0x7B
+
+/* Where are the ISA address/data registers relative to the base address */
+#define SIS5595_ADDR_REG_OFFSET 5
+#define SIS5595_DATA_REG_OFFSET 6
+
+/* The SIS5595 registers */
+#define SIS5595_REG_IN_MAX(nr) (0x2b + (nr) * 2)
+#define SIS5595_REG_IN_MIN(nr) (0x2c + (nr) * 2)
+#define SIS5595_REG_IN(nr) (0x20 + (nr))
+
+#define SIS5595_REG_FAN_MIN(nr) (0x3b + (nr))
+#define SIS5595_REG_FAN(nr) (0x28 + (nr))
+
+/*
+ * On the first version of the chip, the temp registers are separate.
+ * On the second version,
+ * TEMP pin is shared with IN4, configured in PCI register 0x7A.
+ * The registers are the same as well.
+ * OVER and HYST are really MAX and MIN.
+ */
+
+#define REV2MIN	0xb0
+#define SIS5595_REG_TEMP	(((data->revision) >= REV2MIN) ? \
+					SIS5595_REG_IN(4) : 0x27)
+#define SIS5595_REG_TEMP_OVER	(((data->revision) >= REV2MIN) ? \
+					SIS5595_REG_IN_MAX(4) : 0x39)
+#define SIS5595_REG_TEMP_HYST	(((data->revision) >= REV2MIN) ? \
+					SIS5595_REG_IN_MIN(4) : 0x3a)
+
+#define SIS5595_REG_CONFIG 0x40
+#define SIS5595_REG_ALARM1 0x41
+#define SIS5595_REG_ALARM2 0x42
+#define SIS5595_REG_FANDIV 0x47
+
+/*
+ * Conversions. Limit checking is only done on the TO_REG
+ * variants.
+ */
+
+/*
+ * IN: mV, (0V to 4.08V)
+ * REG: 16mV/bit
+ */
+static inline u8 IN_TO_REG(unsigned long val)
+{
+	unsigned long nval = clamp_val(val, 0, 4080);
+	return (nval + 8) / 16;
+}
+#define IN_FROM_REG(val) ((val) *  16)
+
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+	if (rpm <= 0)
+		return 255;
+	if (rpm > 1350000)
+		return 1;
+	return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+}
+
+static inline int FAN_FROM_REG(u8 val, int div)
+{
+	return val == 0 ? -1 : val == 255 ? 0 : 1350000 / (val * div);
+}
+
+/*
+ * TEMP: mC (-54.12C to +157.53C)
+ * REG: 0.83C/bit + 52.12, two's complement
+ */
+static inline int TEMP_FROM_REG(s8 val)
+{
+	return val * 830 + 52120;
+}
+static inline s8 TEMP_TO_REG(long val)
+{
+	int nval = clamp_val(val, -54120, 157530) ;
+	return nval < 0 ? (nval - 5212 - 415) / 830 : (nval - 5212 + 415) / 830;
+}
+
+/*
+ * FAN DIV: 1, 2, 4, or 8 (defaults to 2)
+ * REG: 0, 1, 2, or 3 (respectively) (defaults to 1)
+ */
+static inline u8 DIV_TO_REG(int val)
+{
+	return val == 8 ? 3 : val == 4 ? 2 : val == 1 ? 0 : 1;
+}
+#define DIV_FROM_REG(val) (1 << (val))
+
+/*
+ * For each registered chip, we need to keep some data in memory.
+ * The structure is dynamically allocated.
+ */
+struct sis5595_data {
+	unsigned short addr;
+	const char *name;
+	struct device *hwmon_dev;
+	struct mutex lock;
+
+	struct mutex update_lock;
+	bool valid;		/* true if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+	char maxins;		/* == 3 if temp enabled, otherwise == 4 */
+	u8 revision;		/* Reg. value */
+
+	u8 in[5];		/* Register value */
+	u8 in_max[5];		/* Register value */
+	u8 in_min[5];		/* Register value */
+	u8 fan[2];		/* Register value */
+	u8 fan_min[2];		/* Register value */
+	s8 temp;		/* Register value */
+	s8 temp_over;		/* Register value */
+	s8 temp_hyst;		/* Register value */
+	u8 fan_div[2];		/* Register encoding, shifted right */
+	u16 alarms;		/* Register encoding, combined */
+};
+
+static struct pci_dev *s_bridge;	/* pointer to the (only) sis5595 */
+
+/* ISA access must be locked explicitly. */
+static int sis5595_read_value(struct sis5595_data *data, u8 reg)
+{
+	int res;
+
+	mutex_lock(&data->lock);
+	outb_p(reg, data->addr + SIS5595_ADDR_REG_OFFSET);
+	res = inb_p(data->addr + SIS5595_DATA_REG_OFFSET);
+	mutex_unlock(&data->lock);
+	return res;
+}
+
+static void sis5595_write_value(struct sis5595_data *data, u8 reg, u8 value)
+{
+	mutex_lock(&data->lock);
+	outb_p(reg, data->addr + SIS5595_ADDR_REG_OFFSET);
+	outb_p(value, data->addr + SIS5595_DATA_REG_OFFSET);
+	mutex_unlock(&data->lock);
+}
+
+static struct sis5595_data *sis5595_update_device(struct device *dev)
+{
+	struct sis5595_data *data = dev_get_drvdata(dev);
+	int i;
+
+	mutex_lock(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+
+		for (i = 0; i <= data->maxins; i++) {
+			data->in[i] =
+			    sis5595_read_value(data, SIS5595_REG_IN(i));
+			data->in_min[i] =
+			    sis5595_read_value(data,
+					       SIS5595_REG_IN_MIN(i));
+			data->in_max[i] =
+			    sis5595_read_value(data,
+					       SIS5595_REG_IN_MAX(i));
+		}
+		for (i = 0; i < 2; i++) {
+			data->fan[i] =
+			    sis5595_read_value(data, SIS5595_REG_FAN(i));
+			data->fan_min[i] =
+			    sis5595_read_value(data,
+					       SIS5595_REG_FAN_MIN(i));
+		}
+		if (data->maxins == 3) {
+			data->temp =
+			    sis5595_read_value(data, SIS5595_REG_TEMP);
+			data->temp_over =
+			    sis5595_read_value(data, SIS5595_REG_TEMP_OVER);
+			data->temp_hyst =
+			    sis5595_read_value(data, SIS5595_REG_TEMP_HYST);
+		}
+		i = sis5595_read_value(data, SIS5595_REG_FANDIV);
+		data->fan_div[0] = (i >> 4) & 0x03;
+		data->fan_div[1] = i >> 6;
+		data->alarms =
+		    sis5595_read_value(data, SIS5595_REG_ALARM1) |
+		    (sis5595_read_value(data, SIS5595_REG_ALARM2) << 8);
+		data->last_updated = jiffies;
+		data->valid = true;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
+
+/* 4 Voltages */
+static ssize_t in_show(struct device *dev, struct device_attribute *da,
+		       char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	int nr = attr->index;
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr]));
+}
+
+static ssize_t in_min_show(struct device *dev, struct device_attribute *da,
+			   char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	int nr = attr->index;
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr]));
+}
+
+static ssize_t in_max_show(struct device *dev, struct device_attribute *da,
+			   char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	int nr = attr->index;
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr]));
+}
+
+static ssize_t in_min_store(struct device *dev, struct device_attribute *da,
+			    const char *buf, size_t count)
+{
+	struct sis5595_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	int nr = attr->index;
+	unsigned long val;
+	int err;
+
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	data->in_min[nr] = IN_TO_REG(val);
+	sis5595_write_value(data, SIS5595_REG_IN_MIN(nr), data->in_min[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t in_max_store(struct device *dev, struct device_attribute *da,
+			    const char *buf, size_t count)
+{
+	struct sis5595_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	int nr = attr->index;
+	unsigned long val;
+	int err;
+
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	data->in_max[nr] = IN_TO_REG(val);
+	sis5595_write_value(data, SIS5595_REG_IN_MAX(nr), data->in_max[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR_RO(in0_input, in, 0);
+static SENSOR_DEVICE_ATTR_RW(in0_min, in_min, 0);
+static SENSOR_DEVICE_ATTR_RW(in0_max, in_max, 0);
+static SENSOR_DEVICE_ATTR_RO(in1_input, in, 1);
+static SENSOR_DEVICE_ATTR_RW(in1_min, in_min, 1);
+static SENSOR_DEVICE_ATTR_RW(in1_max, in_max, 1);
+static SENSOR_DEVICE_ATTR_RO(in2_input, in, 2);
+static SENSOR_DEVICE_ATTR_RW(in2_min, in_min, 2);
+static SENSOR_DEVICE_ATTR_RW(in2_max, in_max, 2);
+static SENSOR_DEVICE_ATTR_RO(in3_input, in, 3);
+static SENSOR_DEVICE_ATTR_RW(in3_min, in_min, 3);
+static SENSOR_DEVICE_ATTR_RW(in3_max, in_max, 3);
+static SENSOR_DEVICE_ATTR_RO(in4_input, in, 4);
+static SENSOR_DEVICE_ATTR_RW(in4_min, in_min, 4);
+static SENSOR_DEVICE_ATTR_RW(in4_max, in_max, 4);
+
+/* Temperature */
+static ssize_t temp1_input_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp));
+}
+
+static ssize_t temp1_max_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over));
+}
+
+static ssize_t temp1_max_store(struct device *dev,
+			       struct device_attribute *attr, const char *buf,
+			       size_t count)
+{
+	struct sis5595_data *data = dev_get_drvdata(dev);
+	long val;
+	int err;
+
+	err = kstrtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	data->temp_over = TEMP_TO_REG(val);
+	sis5595_write_value(data, SIS5595_REG_TEMP_OVER, data->temp_over);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t temp1_max_hyst_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_hyst));
+}
+
+static ssize_t temp1_max_hyst_store(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	struct sis5595_data *data = dev_get_drvdata(dev);
+	long val;
+	int err;
+
+	err = kstrtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	data->temp_hyst = TEMP_TO_REG(val);
+	sis5595_write_value(data, SIS5595_REG_TEMP_HYST, data->temp_hyst);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR_RO(temp1_input);
+static DEVICE_ATTR_RW(temp1_max);
+static DEVICE_ATTR_RW(temp1_max_hyst);
+
+/* 2 Fans */
+static ssize_t fan_show(struct device *dev, struct device_attribute *da,
+			char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	int nr = attr->index;
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
+		DIV_FROM_REG(data->fan_div[nr])));
+}
+
+static ssize_t fan_min_show(struct device *dev, struct device_attribute *da,
+			    char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	int nr = attr->index;
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
+		DIV_FROM_REG(data->fan_div[nr])));
+}
+
+static ssize_t fan_min_store(struct device *dev, struct device_attribute *da,
+			     const char *buf, size_t count)
+{
+	struct sis5595_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	int nr = attr->index;
+	unsigned long val;
+	int err;
+
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+	sis5595_write_value(data, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t fan_div_show(struct device *dev, struct device_attribute *da,
+			    char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	int nr = attr->index;
+	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
+}
+
+/*
+ * Note: we save and restore the fan minimum here, because its value is
+ * determined in part by the fan divisor.  This follows the principle of
+ * least surprise; the user doesn't expect the fan minimum to change just
+ * because the divisor changed.
+ */
+static ssize_t fan_div_store(struct device *dev, struct device_attribute *da,
+			     const char *buf, size_t count)
+{
+	struct sis5595_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	int nr = attr->index;
+	unsigned long min;
+	int reg;
+	unsigned long val;
+	int err;
+
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	min = FAN_FROM_REG(data->fan_min[nr],
+			DIV_FROM_REG(data->fan_div[nr]));
+	reg = sis5595_read_value(data, SIS5595_REG_FANDIV);
+
+	switch (val) {
+	case 1:
+		data->fan_div[nr] = 0;
+		break;
+	case 2:
+		data->fan_div[nr] = 1;
+		break;
+	case 4:
+		data->fan_div[nr] = 2;
+		break;
+	case 8:
+		data->fan_div[nr] = 3;
+		break;
+	default:
+		dev_err(dev,
+			"fan_div value %ld not supported. Choose one of 1, 2, 4 or 8!\n",
+			val);
+		mutex_unlock(&data->update_lock);
+		return -EINVAL;
+	}
+
+	switch (nr) {
+	case 0:
+		reg = (reg & 0xcf) | (data->fan_div[nr] << 4);
+		break;
+	case 1:
+		reg = (reg & 0x3f) | (data->fan_div[nr] << 6);
+		break;
+	}
+	sis5595_write_value(data, SIS5595_REG_FANDIV, reg);
+	data->fan_min[nr] =
+		FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+	sis5595_write_value(data, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0);
+static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0);
+static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0);
+static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1);
+static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1);
+static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1);
+
+/* Alarms */
+static ssize_t alarms_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	return sprintf(buf, "%d\n", data->alarms);
+}
+static DEVICE_ATTR_RO(alarms);
+
+static ssize_t alarm_show(struct device *dev, struct device_attribute *da,
+			  char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	int nr = to_sensor_dev_attr(da)->index;
+	return sprintf(buf, "%u\n", (data->alarms >> nr) & 1);
+}
+static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 0);
+static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 1);
+static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 2);
+static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 3);
+static SENSOR_DEVICE_ATTR_RO(in4_alarm, alarm, 15);
+static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 6);
+static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 7);
+static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 15);
+
+static ssize_t name_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct sis5595_data *data = dev_get_drvdata(dev);
+	return sprintf(buf, "%s\n", data->name);
+}
+static DEVICE_ATTR_RO(name);
+
+static struct attribute *sis5595_attributes[] = {
+	&sensor_dev_attr_in0_input.dev_attr.attr,
+	&sensor_dev_attr_in0_min.dev_attr.attr,
+	&sensor_dev_attr_in0_max.dev_attr.attr,
+	&sensor_dev_attr_in0_alarm.dev_attr.attr,
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in1_min.dev_attr.attr,
+	&sensor_dev_attr_in1_max.dev_attr.attr,
+	&sensor_dev_attr_in1_alarm.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_min.dev_attr.attr,
+	&sensor_dev_attr_in2_max.dev_attr.attr,
+	&sensor_dev_attr_in2_alarm.dev_attr.attr,
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+	&sensor_dev_attr_in3_min.dev_attr.attr,
+	&sensor_dev_attr_in3_max.dev_attr.attr,
+	&sensor_dev_attr_in3_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_fan1_min.dev_attr.attr,
+	&sensor_dev_attr_fan1_div.dev_attr.attr,
+	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan2_input.dev_attr.attr,
+	&sensor_dev_attr_fan2_min.dev_attr.attr,
+	&sensor_dev_attr_fan2_div.dev_attr.attr,
+	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
+
+	&dev_attr_alarms.attr,
+	&dev_attr_name.attr,
+	NULL
+};
+
+static const struct attribute_group sis5595_group = {
+	.attrs = sis5595_attributes,
+};
+
+static struct attribute *sis5595_attributes_in4[] = {
+	&sensor_dev_attr_in4_input.dev_attr.attr,
+	&sensor_dev_attr_in4_min.dev_attr.attr,
+	&sensor_dev_attr_in4_max.dev_attr.attr,
+	&sensor_dev_attr_in4_alarm.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group sis5595_group_in4 = {
+	.attrs = sis5595_attributes_in4,
+};
+
+static struct attribute *sis5595_attributes_temp1[] = {
+	&dev_attr_temp1_input.attr,
+	&dev_attr_temp1_max.attr,
+	&dev_attr_temp1_max_hyst.attr,
+	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group sis5595_group_temp1 = {
+	.attrs = sis5595_attributes_temp1,
+};
+
+/* Called when we have found a new SIS5595. */
+static void sis5595_init_device(struct sis5595_data *data)
+{
+	u8 config = sis5595_read_value(data, SIS5595_REG_CONFIG);
+	if (!(config & 0x01))
+		sis5595_write_value(data, SIS5595_REG_CONFIG,
+				(config & 0xf7) | 0x01);
+}
+
+/* This is called when the module is loaded */
+static int sis5595_probe(struct platform_device *pdev)
+{
+	int err = 0;
+	int i;
+	struct sis5595_data *data;
+	struct resource *res;
+	char val;
+
+	/* Reserve the ISA region */
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!devm_request_region(&pdev->dev, res->start, SIS5595_EXTENT,
+				 DRIVER_NAME))
+		return -EBUSY;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(struct sis5595_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	mutex_init(&data->lock);
+	mutex_init(&data->update_lock);
+	data->addr = res->start;
+	data->name = DRIVER_NAME;
+	platform_set_drvdata(pdev, data);
+
+	/*
+	 * Check revision and pin registers to determine whether 4 or 5 voltages
+	 */
+	data->revision = s_bridge->revision;
+	/* 4 voltages, 1 temp */
+	data->maxins = 3;
+	if (data->revision >= REV2MIN) {
+		pci_read_config_byte(s_bridge, SIS5595_PIN_REG, &val);
+		if (!(val & 0x80))
+			/* 5 voltages, no temps */
+			data->maxins = 4;
+	}
+
+	/* Initialize the SIS5595 chip */
+	sis5595_init_device(data);
+
+	/* A few vars need to be filled upon startup */
+	for (i = 0; i < 2; i++) {
+		data->fan_min[i] = sis5595_read_value(data,
+					SIS5595_REG_FAN_MIN(i));
+	}
+
+	/* Register sysfs hooks */
+	err = sysfs_create_group(&pdev->dev.kobj, &sis5595_group);
+	if (err)
+		return err;
+	if (data->maxins == 4) {
+		err = sysfs_create_group(&pdev->dev.kobj, &sis5595_group_in4);
+		if (err)
+			goto exit_remove_files;
+	} else {
+		err = sysfs_create_group(&pdev->dev.kobj, &sis5595_group_temp1);
+		if (err)
+			goto exit_remove_files;
+	}
+
+	data->hwmon_dev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		goto exit_remove_files;
+	}
+
+	return 0;
+
+exit_remove_files:
+	sysfs_remove_group(&pdev->dev.kobj, &sis5595_group);
+	sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_in4);
+	sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_temp1);
+	return err;
+}
+
+static int sis5595_remove(struct platform_device *pdev)
+{
+	struct sis5595_data *data = platform_get_drvdata(pdev);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&pdev->dev.kobj, &sis5595_group);
+	sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_in4);
+	sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_temp1);
+
+	return 0;
+}
+
+static const struct pci_device_id sis5595_pci_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, sis5595_pci_ids);
+
+static int blacklist[] = {
+	PCI_DEVICE_ID_SI_540,
+	PCI_DEVICE_ID_SI_550,
+	PCI_DEVICE_ID_SI_630,
+	PCI_DEVICE_ID_SI_645,
+	PCI_DEVICE_ID_SI_730,
+	PCI_DEVICE_ID_SI_735,
+	PCI_DEVICE_ID_SI_5511, /*
+				* 5513 chip has the 0008 device but
+				* that ID shows up in other chips so we
+				* use the 5511 ID for recognition
+				*/
+	PCI_DEVICE_ID_SI_5597,
+	PCI_DEVICE_ID_SI_5598,
+	0 };
+
+static int sis5595_device_add(unsigned short address)
+{
+	struct resource res = {
+		.start	= address,
+		.end	= address + SIS5595_EXTENT - 1,
+		.name	= DRIVER_NAME,
+		.flags	= IORESOURCE_IO,
+	};
+	int err;
+
+	err = acpi_check_resource_conflict(&res);
+	if (err)
+		goto exit;
+
+	pdev = platform_device_alloc(DRIVER_NAME, address);
+	if (!pdev) {
+		err = -ENOMEM;
+		pr_err("Device allocation failed\n");
+		goto exit;
+	}
+
+	err = platform_device_add_resources(pdev, &res, 1);
+	if (err) {
+		pr_err("Device resource addition failed (%d)\n", err);
+		goto exit_device_put;
+	}
+
+	err = platform_device_add(pdev);
+	if (err) {
+		pr_err("Device addition failed (%d)\n", err);
+		goto exit_device_put;
+	}
+
+	return 0;
+
+exit_device_put:
+	platform_device_put(pdev);
+exit:
+	return err;
+}
+
+static struct platform_driver sis5595_driver = {
+	.driver = {
+		.name	= DRIVER_NAME,
+	},
+	.probe		= sis5595_probe,
+	.remove		= sis5595_remove,
+};
+
+static int sis5595_pci_probe(struct pci_dev *dev,
+				       const struct pci_device_id *id)
+{
+	u16 address;
+	u8 enable;
+	int *i;
+
+	for (i = blacklist; *i != 0; i++) {
+		struct pci_dev *d;
+		d = pci_get_device(PCI_VENDOR_ID_SI, *i, NULL);
+		if (d) {
+			dev_err(&d->dev,
+				"Looked for SIS5595 but found unsupported device %.4x\n",
+				*i);
+			pci_dev_put(d);
+			return -ENODEV;
+		}
+	}
+
+	force_addr &= ~(SIS5595_EXTENT - 1);
+	if (force_addr) {
+		dev_warn(&dev->dev, "Forcing ISA address 0x%x\n", force_addr);
+		pci_write_config_word(dev, SIS5595_BASE_REG, force_addr);
+	}
+
+	if (PCIBIOS_SUCCESSFUL !=
+	    pci_read_config_word(dev, SIS5595_BASE_REG, &address)) {
+		dev_err(&dev->dev, "Failed to read ISA address\n");
+		return -ENODEV;
+	}
+
+	address &= ~(SIS5595_EXTENT - 1);
+	if (!address) {
+		dev_err(&dev->dev,
+			"Base address not set - upgrade BIOS or use force_addr=0xaddr\n");
+		return -ENODEV;
+	}
+	if (force_addr && address != force_addr) {
+		/* doesn't work for some chips? */
+		dev_err(&dev->dev, "Failed to force ISA address\n");
+		return -ENODEV;
+	}
+
+	if (PCIBIOS_SUCCESSFUL !=
+	    pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable)) {
+		dev_err(&dev->dev, "Failed to read enable register\n");
+		return -ENODEV;
+	}
+	if (!(enable & 0x80)) {
+		if ((PCIBIOS_SUCCESSFUL !=
+		     pci_write_config_byte(dev, SIS5595_ENABLE_REG,
+					   enable | 0x80))
+		 || (PCIBIOS_SUCCESSFUL !=
+		     pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable))
+		 || (!(enable & 0x80))) {
+			/* doesn't work for some chips! */
+			dev_err(&dev->dev, "Failed to enable HWM device\n");
+			return -ENODEV;
+		}
+	}
+
+	if (platform_driver_register(&sis5595_driver)) {
+		dev_dbg(&dev->dev, "Failed to register sis5595 driver\n");
+		goto exit;
+	}
+
+	s_bridge = pci_dev_get(dev);
+	/* Sets global pdev as a side effect */
+	if (sis5595_device_add(address))
+		goto exit_unregister;
+
+	/*
+	 * Always return failure here.  This is to allow other drivers to bind
+	 * to this pci device.  We don't really want to have control over the
+	 * pci device, we only wanted to read as few register values from it.
+	 */
+	return -ENODEV;
+
+exit_unregister:
+	pci_dev_put(dev);
+	platform_driver_unregister(&sis5595_driver);
+exit:
+	return -ENODEV;
+}
+
+static struct pci_driver sis5595_pci_driver = {
+	.name            = DRIVER_NAME,
+	.id_table        = sis5595_pci_ids,
+	.probe           = sis5595_pci_probe,
+};
+
+static int __init sm_sis5595_init(void)
+{
+	return pci_register_driver(&sis5595_pci_driver);
+}
+
+static void __exit sm_sis5595_exit(void)
+{
+	pci_unregister_driver(&sis5595_pci_driver);
+	if (s_bridge != NULL) {
+		platform_device_unregister(pdev);
+		platform_driver_unregister(&sis5595_driver);
+		pci_dev_put(s_bridge);
+		s_bridge = NULL;
+	}
+}
+
+MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>");
+MODULE_DESCRIPTION("SiS 5595 Sensor device");
+MODULE_LICENSE("GPL");
+
+module_init(sm_sis5595_init);
+module_exit(sm_sis5595_exit);