Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1864 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
new file mode 100644
index 000000000..3159ffbb7
--- /dev/null
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -0,0 +1,1864 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+    Copyright (c) 1998 - 2002  Frodo Looijaard <frodol@dds.nl>,
+    Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
+    <mdsxyz123@yahoo.com>
+    Copyright (C) 2007 - 2014  Jean Delvare <jdelvare@suse.de>
+    Copyright (C) 2010         Intel Corporation,
+                               David Woodhouse <dwmw2@infradead.org>
+
+*/
+
+/*
+ * Supports the following Intel I/O Controller Hubs (ICH):
+ *
+ *					I/O			Block	I2C
+ *					region	SMBus	Block	proc.	block
+ * Chip name			PCI ID	size	PEC	buffer	call	read
+ * ---------------------------------------------------------------------------
+ * 82801AA (ICH)		0x2413	16	no	no	no	no
+ * 82801AB (ICH0)		0x2423	16	no	no	no	no
+ * 82801BA (ICH2)		0x2443	16	no	no	no	no
+ * 82801CA (ICH3)		0x2483	32	soft	no	no	no
+ * 82801DB (ICH4)		0x24c3	32	hard	yes	no	no
+ * 82801E (ICH5)		0x24d3	32	hard	yes	yes	yes
+ * 6300ESB			0x25a4	32	hard	yes	yes	yes
+ * 82801F (ICH6)		0x266a	32	hard	yes	yes	yes
+ * 6310ESB/6320ESB		0x269b	32	hard	yes	yes	yes
+ * 82801G (ICH7)		0x27da	32	hard	yes	yes	yes
+ * 82801H (ICH8)		0x283e	32	hard	yes	yes	yes
+ * 82801I (ICH9)		0x2930	32	hard	yes	yes	yes
+ * EP80579 (Tolapai)		0x5032	32	hard	yes	yes	yes
+ * ICH10			0x3a30	32	hard	yes	yes	yes
+ * ICH10			0x3a60	32	hard	yes	yes	yes
+ * 5/3400 Series (PCH)		0x3b30	32	hard	yes	yes	yes
+ * 6 Series (PCH)		0x1c22	32	hard	yes	yes	yes
+ * Patsburg (PCH)		0x1d22	32	hard	yes	yes	yes
+ * Patsburg (PCH) IDF		0x1d70	32	hard	yes	yes	yes
+ * Patsburg (PCH) IDF		0x1d71	32	hard	yes	yes	yes
+ * Patsburg (PCH) IDF		0x1d72	32	hard	yes	yes	yes
+ * DH89xxCC (PCH)		0x2330	32	hard	yes	yes	yes
+ * Panther Point (PCH)		0x1e22	32	hard	yes	yes	yes
+ * Lynx Point (PCH)		0x8c22	32	hard	yes	yes	yes
+ * Lynx Point-LP (PCH)		0x9c22	32	hard	yes	yes	yes
+ * Avoton (SOC)			0x1f3c	32	hard	yes	yes	yes
+ * Wellsburg (PCH)		0x8d22	32	hard	yes	yes	yes
+ * Wellsburg (PCH) MS		0x8d7d	32	hard	yes	yes	yes
+ * Wellsburg (PCH) MS		0x8d7e	32	hard	yes	yes	yes
+ * Wellsburg (PCH) MS		0x8d7f	32	hard	yes	yes	yes
+ * Coleto Creek (PCH)		0x23b0	32	hard	yes	yes	yes
+ * Wildcat Point (PCH)		0x8ca2	32	hard	yes	yes	yes
+ * Wildcat Point-LP (PCH)	0x9ca2	32	hard	yes	yes	yes
+ * BayTrail (SOC)		0x0f12	32	hard	yes	yes	yes
+ * Braswell (SOC)		0x2292	32	hard	yes	yes	yes
+ * Sunrise Point-H (PCH) 	0xa123  32	hard	yes	yes	yes
+ * Sunrise Point-LP (PCH)	0x9d23	32	hard	yes	yes	yes
+ * DNV (SOC)			0x19df	32	hard	yes	yes	yes
+ * Emmitsburg (PCH)		0x1bc9	32	hard	yes	yes	yes
+ * Broxton (SOC)		0x5ad4	32	hard	yes	yes	yes
+ * Lewisburg (PCH)		0xa1a3	32	hard	yes	yes	yes
+ * Lewisburg Supersku (PCH)	0xa223	32	hard	yes	yes	yes
+ * Kaby Lake PCH-H (PCH)	0xa2a3	32	hard	yes	yes	yes
+ * Gemini Lake (SOC)		0x31d4	32	hard	yes	yes	yes
+ * Cannon Lake-H (PCH)		0xa323	32	hard	yes	yes	yes
+ * Cannon Lake-LP (PCH)		0x9da3	32	hard	yes	yes	yes
+ * Cedar Fork (PCH)		0x18df	32	hard	yes	yes	yes
+ * Ice Lake-LP (PCH)		0x34a3	32	hard	yes	yes	yes
+ * Ice Lake-N (PCH)		0x38a3	32	hard	yes	yes	yes
+ * Comet Lake (PCH)		0x02a3	32	hard	yes	yes	yes
+ * Comet Lake-H (PCH)		0x06a3	32	hard	yes	yes	yes
+ * Elkhart Lake (PCH)		0x4b23	32	hard	yes	yes	yes
+ * Tiger Lake-LP (PCH)		0xa0a3	32	hard	yes	yes	yes
+ * Tiger Lake-H (PCH)		0x43a3	32	hard	yes	yes	yes
+ * Jasper Lake (SOC)		0x4da3	32	hard	yes	yes	yes
+ * Comet Lake-V (PCH)		0xa3a3	32	hard	yes	yes	yes
+ * Alder Lake-S (PCH)		0x7aa3	32	hard	yes	yes	yes
+ * Alder Lake-P (PCH)		0x51a3	32	hard	yes	yes	yes
+ * Alder Lake-M (PCH)		0x54a3	32	hard	yes	yes	yes
+ * Raptor Lake-S (PCH)		0x7a23	32	hard	yes	yes	yes
+ * Meteor Lake-P (SOC)		0x7e22	32	hard	yes	yes	yes
+ *
+ * Features supported by this driver:
+ * Software PEC				no
+ * Hardware PEC				yes
+ * Block buffer				yes
+ * Block process call transaction	yes
+ * I2C block read transaction		yes (doesn't use the block buffer)
+ * Slave mode				no
+ * SMBus Host Notify			yes
+ * Interrupt processing			yes
+ *
+ * See the file Documentation/i2c/busses/i2c-i801.rst for details.
+ */
+
+#define DRV_NAME	"i801_smbus"
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/dmi.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/itco_wdt.h>
+#include <linux/platform_data/x86/p2sb.h>
+#include <linux/pm_runtime.h>
+#include <linux/mutex.h>
+
+#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
+#include <linux/gpio/machine.h>
+#include <linux/platform_data/i2c-mux-gpio.h>
+#endif
+
+/* I801 SMBus address offsets */
+#define SMBHSTSTS(p)	(0 + (p)->smba)
+#define SMBHSTCNT(p)	(2 + (p)->smba)
+#define SMBHSTCMD(p)	(3 + (p)->smba)
+#define SMBHSTADD(p)	(4 + (p)->smba)
+#define SMBHSTDAT0(p)	(5 + (p)->smba)
+#define SMBHSTDAT1(p)	(6 + (p)->smba)
+#define SMBBLKDAT(p)	(7 + (p)->smba)
+#define SMBPEC(p)	(8 + (p)->smba)		/* ICH3 and later */
+#define SMBAUXSTS(p)	(12 + (p)->smba)	/* ICH4 and later */
+#define SMBAUXCTL(p)	(13 + (p)->smba)	/* ICH4 and later */
+#define SMBSLVSTS(p)	(16 + (p)->smba)	/* ICH3 and later */
+#define SMBSLVCMD(p)	(17 + (p)->smba)	/* ICH3 and later */
+#define SMBNTFDADD(p)	(20 + (p)->smba)	/* ICH3 and later */
+
+/* PCI Address Constants */
+#define SMBBAR		4
+#define SMBHSTCFG	0x040
+#define TCOBASE		0x050
+#define TCOCTL		0x054
+
+#define SBREG_SMBCTRL		0xc6000c
+#define SBREG_SMBCTRL_DNV	0xcf000c
+
+/* Host configuration bits for SMBHSTCFG */
+#define SMBHSTCFG_HST_EN	BIT(0)
+#define SMBHSTCFG_SMB_SMI_EN	BIT(1)
+#define SMBHSTCFG_I2C_EN	BIT(2)
+#define SMBHSTCFG_SPD_WD	BIT(4)
+
+/* TCO configuration bits for TCOCTL */
+#define TCOCTL_EN		BIT(8)
+
+/* Auxiliary status register bits, ICH4+ only */
+#define SMBAUXSTS_CRCE		BIT(0)
+#define SMBAUXSTS_STCO		BIT(1)
+
+/* Auxiliary control register bits, ICH4+ only */
+#define SMBAUXCTL_CRC		BIT(0)
+#define SMBAUXCTL_E32B		BIT(1)
+
+/* I801 command constants */
+#define I801_QUICK		0x00
+#define I801_BYTE		0x04
+#define I801_BYTE_DATA		0x08
+#define I801_WORD_DATA		0x0C
+#define I801_PROC_CALL		0x10
+#define I801_BLOCK_DATA		0x14
+#define I801_I2C_BLOCK_DATA	0x18	/* ICH5 and later */
+#define I801_BLOCK_PROC_CALL	0x1C
+
+/* I801 Host Control register bits */
+#define SMBHSTCNT_INTREN	BIT(0)
+#define SMBHSTCNT_KILL		BIT(1)
+#define SMBHSTCNT_LAST_BYTE	BIT(5)
+#define SMBHSTCNT_START		BIT(6)
+#define SMBHSTCNT_PEC_EN	BIT(7)	/* ICH3 and later */
+
+/* I801 Hosts Status register bits */
+#define SMBHSTSTS_BYTE_DONE	BIT(7)
+#define SMBHSTSTS_INUSE_STS	BIT(6)
+#define SMBHSTSTS_SMBALERT_STS	BIT(5)
+#define SMBHSTSTS_FAILED	BIT(4)
+#define SMBHSTSTS_BUS_ERR	BIT(3)
+#define SMBHSTSTS_DEV_ERR	BIT(2)
+#define SMBHSTSTS_INTR		BIT(1)
+#define SMBHSTSTS_HOST_BUSY	BIT(0)
+
+/* Host Notify Status register bits */
+#define SMBSLVSTS_HST_NTFY_STS	BIT(0)
+
+/* Host Notify Command register bits */
+#define SMBSLVCMD_SMBALERT_DISABLE	BIT(2)
+#define SMBSLVCMD_HST_NTFY_INTREN	BIT(0)
+
+#define STATUS_ERROR_FLAGS	(SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \
+				 SMBHSTSTS_DEV_ERR)
+
+#define STATUS_FLAGS		(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \
+				 STATUS_ERROR_FLAGS)
+
+/* Older devices have their ID defined in <linux/pci_ids.h> */
+#define PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS		0x02a3
+#define PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS		0x06a3
+#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS		0x0f12
+#define PCI_DEVICE_ID_INTEL_CDF_SMBUS			0x18df
+#define PCI_DEVICE_ID_INTEL_DNV_SMBUS			0x19df
+#define PCI_DEVICE_ID_INTEL_EBG_SMBUS			0x1bc9
+#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS		0x1c22
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS		0x1d22
+/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0		0x1d70
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1		0x1d71
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2		0x1d72
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS		0x1e22
+#define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS		0x1f3c
+#define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS		0x2292
+#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS		0x2330
+#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS		0x23b0
+#define PCI_DEVICE_ID_INTEL_GEMINILAKE_SMBUS		0x31d4
+#define PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS		0x34a3
+#define PCI_DEVICE_ID_INTEL_ICELAKE_N_SMBUS		0x38a3
+#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS		0x3b30
+#define PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS		0x43a3
+#define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS		0x4b23
+#define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS		0x4da3
+#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS		0x51a3
+#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_M_SMBUS		0x54a3
+#define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS		0x5ad4
+#define PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_S_SMBUS		0x7a23
+#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS		0x7aa3
+#define PCI_DEVICE_ID_INTEL_METEOR_LAKE_P_SMBUS		0x7e22
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS		0x8c22
+#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS		0x8ca2
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS		0x8d22
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0		0x8d7d
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1		0x8d7e
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2		0x8d7f
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS		0x9c22
+#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS	0x9ca2
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS	0x9d23
+#define PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS		0x9da3
+#define PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS		0xa0a3
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS	0xa123
+#define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS		0xa1a3
+#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS	0xa223
+#define PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS	0xa2a3
+#define PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS		0xa323
+#define PCI_DEVICE_ID_INTEL_COMETLAKE_V_SMBUS		0xa3a3
+
+struct i801_mux_config {
+	char *gpio_chip;
+	unsigned values[3];
+	int n_values;
+	unsigned classes[3];
+	unsigned gpios[2];		/* Relative to gpio_chip->base */
+	int n_gpios;
+};
+
+struct i801_priv {
+	struct i2c_adapter adapter;
+	unsigned long smba;
+	unsigned char original_hstcfg;
+	unsigned char original_hstcnt;
+	unsigned char original_slvcmd;
+	struct pci_dev *pci_dev;
+	unsigned int features;
+
+	/* isr processing */
+	struct completion done;
+	u8 status;
+
+	/* Command state used by isr for byte-by-byte block transactions */
+	u8 cmd;
+	bool is_read;
+	int count;
+	int len;
+	u8 *data;
+
+#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
+	const struct i801_mux_config *mux_drvdata;
+	struct platform_device *mux_pdev;
+	struct gpiod_lookup_table *lookup;
+#endif
+	struct platform_device *tco_pdev;
+
+	/*
+	 * If set to true the host controller registers are reserved for
+	 * ACPI AML use. Protected by acpi_lock.
+	 */
+	bool acpi_reserved;
+	struct mutex acpi_lock;
+};
+
+#define FEATURE_SMBUS_PEC	BIT(0)
+#define FEATURE_BLOCK_BUFFER	BIT(1)
+#define FEATURE_BLOCK_PROC	BIT(2)
+#define FEATURE_I2C_BLOCK_READ	BIT(3)
+#define FEATURE_IRQ		BIT(4)
+#define FEATURE_HOST_NOTIFY	BIT(5)
+/* Not really a feature, but it's convenient to handle it as such */
+#define FEATURE_IDF		BIT(15)
+#define FEATURE_TCO_SPT		BIT(16)
+#define FEATURE_TCO_CNL		BIT(17)
+
+static const char *i801_feature_names[] = {
+	"SMBus PEC",
+	"Block buffer",
+	"Block process call",
+	"I2C block read",
+	"Interrupt",
+	"SMBus Host Notify",
+};
+
+static unsigned int disable_features;
+module_param(disable_features, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n"
+	"\t\t  0x01  disable SMBus PEC\n"
+	"\t\t  0x02  disable the block buffer\n"
+	"\t\t  0x08  disable the I2C block read functionality\n"
+	"\t\t  0x10  don't use interrupts\n"
+	"\t\t  0x20  disable SMBus Host Notify ");
+
+/* Make sure the SMBus host is ready to start transmitting.
+   Return 0 if it is, -EBUSY if it is not. */
+static int i801_check_pre(struct i801_priv *priv)
+{
+	int status;
+
+	status = inb_p(SMBHSTSTS(priv));
+	if (status & SMBHSTSTS_HOST_BUSY) {
+		pci_err(priv->pci_dev, "SMBus is busy, can't use it!\n");
+		return -EBUSY;
+	}
+
+	status &= STATUS_FLAGS;
+	if (status) {
+		pci_dbg(priv->pci_dev, "Clearing status flags (%02x)\n", status);
+		outb_p(status, SMBHSTSTS(priv));
+	}
+
+	/*
+	 * Clear CRC status if needed.
+	 * During normal operation, i801_check_post() takes care
+	 * of it after every operation.  We do it here only in case
+	 * the hardware was already in this state when the driver
+	 * started.
+	 */
+	if (priv->features & FEATURE_SMBUS_PEC) {
+		status = inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE;
+		if (status) {
+			pci_dbg(priv->pci_dev, "Clearing aux status flags (%02x)\n", status);
+			outb_p(status, SMBAUXSTS(priv));
+		}
+	}
+
+	return 0;
+}
+
+static int i801_check_post(struct i801_priv *priv, int status)
+{
+	int result = 0;
+
+	/*
+	 * If the SMBus is still busy, we give up
+	 */
+	if (unlikely(status < 0)) {
+		dev_err(&priv->pci_dev->dev, "Transaction timeout\n");
+		/* try to stop the current command */
+		dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n");
+		outb_p(SMBHSTCNT_KILL, SMBHSTCNT(priv));
+		usleep_range(1000, 2000);
+		outb_p(0, SMBHSTCNT(priv));
+
+		/* Check if it worked */
+		status = inb_p(SMBHSTSTS(priv));
+		if ((status & SMBHSTSTS_HOST_BUSY) ||
+		    !(status & SMBHSTSTS_FAILED))
+			dev_err(&priv->pci_dev->dev,
+				"Failed terminating the transaction\n");
+		return -ETIMEDOUT;
+	}
+
+	if (status & SMBHSTSTS_FAILED) {
+		result = -EIO;
+		dev_err(&priv->pci_dev->dev, "Transaction failed\n");
+	}
+	if (status & SMBHSTSTS_DEV_ERR) {
+		/*
+		 * This may be a PEC error, check and clear it.
+		 *
+		 * AUXSTS is handled differently from HSTSTS.
+		 * For HSTSTS, i801_isr() or i801_wait_intr()
+		 * has already cleared the error bits in hardware,
+		 * and we are passed a copy of the original value
+		 * in "status".
+		 * For AUXSTS, the hardware register is left
+		 * for us to handle here.
+		 * This is asymmetric, slightly iffy, but safe,
+		 * since all this code is serialized and the CRCE
+		 * bit is harmless as long as it's cleared before
+		 * the next operation.
+		 */
+		if ((priv->features & FEATURE_SMBUS_PEC) &&
+		    (inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE)) {
+			outb_p(SMBAUXSTS_CRCE, SMBAUXSTS(priv));
+			result = -EBADMSG;
+			dev_dbg(&priv->pci_dev->dev, "PEC error\n");
+		} else {
+			result = -ENXIO;
+			dev_dbg(&priv->pci_dev->dev, "No response\n");
+		}
+	}
+	if (status & SMBHSTSTS_BUS_ERR) {
+		result = -EAGAIN;
+		dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n");
+	}
+
+	return result;
+}
+
+/* Wait for BUSY being cleared and either INTR or an error flag being set */
+static int i801_wait_intr(struct i801_priv *priv)
+{
+	unsigned long timeout = jiffies + priv->adapter.timeout;
+	int status, busy;
+
+	do {
+		usleep_range(250, 500);
+		status = inb_p(SMBHSTSTS(priv));
+		busy = status & SMBHSTSTS_HOST_BUSY;
+		status &= STATUS_ERROR_FLAGS | SMBHSTSTS_INTR;
+		if (!busy && status)
+			return status;
+	} while (time_is_after_eq_jiffies(timeout));
+
+	return -ETIMEDOUT;
+}
+
+/* Wait for either BYTE_DONE or an error flag being set */
+static int i801_wait_byte_done(struct i801_priv *priv)
+{
+	unsigned long timeout = jiffies + priv->adapter.timeout;
+	int status;
+
+	do {
+		usleep_range(250, 500);
+		status = inb_p(SMBHSTSTS(priv));
+		if (status & (STATUS_ERROR_FLAGS | SMBHSTSTS_BYTE_DONE))
+			return status & STATUS_ERROR_FLAGS;
+	} while (time_is_after_eq_jiffies(timeout));
+
+	return -ETIMEDOUT;
+}
+
+static int i801_transaction(struct i801_priv *priv, int xact)
+{
+	int status;
+	unsigned long result;
+	const struct i2c_adapter *adap = &priv->adapter;
+
+	status = i801_check_pre(priv);
+	if (status < 0)
+		return status;
+
+	if (priv->features & FEATURE_IRQ) {
+		reinit_completion(&priv->done);
+		outb_p(xact | SMBHSTCNT_INTREN | SMBHSTCNT_START,
+		       SMBHSTCNT(priv));
+		result = wait_for_completion_timeout(&priv->done, adap->timeout);
+		return i801_check_post(priv, result ? priv->status : -ETIMEDOUT);
+	}
+
+	outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv));
+
+	status = i801_wait_intr(priv);
+	return i801_check_post(priv, status);
+}
+
+static int i801_block_transaction_by_block(struct i801_priv *priv,
+					   union i2c_smbus_data *data,
+					   char read_write, int command)
+{
+	int i, len, status, xact;
+
+	switch (command) {
+	case I2C_SMBUS_BLOCK_PROC_CALL:
+		xact = I801_BLOCK_PROC_CALL;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		xact = I801_BLOCK_DATA;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	/* Set block buffer mode */
+	outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
+
+	inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
+
+	if (read_write == I2C_SMBUS_WRITE) {
+		len = data->block[0];
+		outb_p(len, SMBHSTDAT0(priv));
+		for (i = 0; i < len; i++)
+			outb_p(data->block[i+1], SMBBLKDAT(priv));
+	}
+
+	status = i801_transaction(priv, xact);
+	if (status)
+		return status;
+
+	if (read_write == I2C_SMBUS_READ ||
+	    command == I2C_SMBUS_BLOCK_PROC_CALL) {
+		len = inb_p(SMBHSTDAT0(priv));
+		if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
+			return -EPROTO;
+
+		data->block[0] = len;
+		for (i = 0; i < len; i++)
+			data->block[i + 1] = inb_p(SMBBLKDAT(priv));
+	}
+	return 0;
+}
+
+static void i801_isr_byte_done(struct i801_priv *priv)
+{
+	if (priv->is_read) {
+		/* For SMBus block reads, length is received with first byte */
+		if (((priv->cmd & 0x1c) == I801_BLOCK_DATA) &&
+		    (priv->count == 0)) {
+			priv->len = inb_p(SMBHSTDAT0(priv));
+			if (priv->len < 1 || priv->len > I2C_SMBUS_BLOCK_MAX) {
+				dev_err(&priv->pci_dev->dev,
+					"Illegal SMBus block read size %d\n",
+					priv->len);
+				/* FIXME: Recover */
+				priv->len = I2C_SMBUS_BLOCK_MAX;
+			}
+			priv->data[-1] = priv->len;
+		}
+
+		/* Read next byte */
+		if (priv->count < priv->len)
+			priv->data[priv->count++] = inb(SMBBLKDAT(priv));
+		else
+			dev_dbg(&priv->pci_dev->dev,
+				"Discarding extra byte on block read\n");
+
+		/* Set LAST_BYTE for last byte of read transaction */
+		if (priv->count == priv->len - 1)
+			outb_p(priv->cmd | SMBHSTCNT_LAST_BYTE,
+			       SMBHSTCNT(priv));
+	} else if (priv->count < priv->len - 1) {
+		/* Write next byte, except for IRQ after last byte */
+		outb_p(priv->data[++priv->count], SMBBLKDAT(priv));
+	}
+
+	/* Clear BYTE_DONE to continue with next byte */
+	outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
+}
+
+static irqreturn_t i801_host_notify_isr(struct i801_priv *priv)
+{
+	unsigned short addr;
+
+	addr = inb_p(SMBNTFDADD(priv)) >> 1;
+
+	/*
+	 * With the tested platforms, reading SMBNTFDDAT (22 + (p)->smba)
+	 * always returns 0. Our current implementation doesn't provide
+	 * data, so we just ignore it.
+	 */
+	i2c_handle_smbus_host_notify(&priv->adapter, addr);
+
+	/* clear Host Notify bit and return */
+	outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv));
+	return IRQ_HANDLED;
+}
+
+/*
+ * There are three kinds of interrupts:
+ *
+ * 1) i801 signals transaction completion with one of these interrupts:
+ *      INTR - Success
+ *      DEV_ERR - Invalid command, NAK or communication timeout
+ *      BUS_ERR - SMI# transaction collision
+ *      FAILED - transaction was canceled due to a KILL request
+ *    When any of these occur, update ->status and signal completion.
+ *    ->status must be cleared before kicking off the next transaction.
+ *
+ * 2) For byte-by-byte (I2C read/write) transactions, one BYTE_DONE interrupt
+ *    occurs for each byte of a byte-by-byte to prepare the next byte.
+ *
+ * 3) Host Notify interrupts
+ */
+static irqreturn_t i801_isr(int irq, void *dev_id)
+{
+	struct i801_priv *priv = dev_id;
+	u16 pcists;
+	u8 status;
+
+	/* Confirm this is our interrupt */
+	pci_read_config_word(priv->pci_dev, PCI_STATUS, &pcists);
+	if (!(pcists & PCI_STATUS_INTERRUPT))
+		return IRQ_NONE;
+
+	if (priv->features & FEATURE_HOST_NOTIFY) {
+		status = inb_p(SMBSLVSTS(priv));
+		if (status & SMBSLVSTS_HST_NTFY_STS)
+			return i801_host_notify_isr(priv);
+	}
+
+	status = inb_p(SMBHSTSTS(priv));
+	if (status & SMBHSTSTS_BYTE_DONE)
+		i801_isr_byte_done(priv);
+
+	/*
+	 * Clear remaining IRQ sources: Completion of last command, errors
+	 * and the SMB_ALERT signal. SMB_ALERT status is set after signal
+	 * assertion independently of the interrupt generation being blocked
+	 * or not so clear it always when the status is set.
+	 */
+	status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS | SMBHSTSTS_SMBALERT_STS;
+	if (status)
+		outb_p(status, SMBHSTSTS(priv));
+	status &= ~SMBHSTSTS_SMBALERT_STS; /* SMB_ALERT not reported */
+	/*
+	 * Report transaction result.
+	 * ->status must be cleared before the next transaction is started.
+	 */
+	if (status) {
+		priv->status = status;
+		complete(&priv->done);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * For "byte-by-byte" block transactions:
+ *   I2C write uses cmd=I801_BLOCK_DATA, I2C_EN=1
+ *   I2C read uses cmd=I801_I2C_BLOCK_DATA
+ */
+static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
+					       union i2c_smbus_data *data,
+					       char read_write, int command)
+{
+	int i, len;
+	int smbcmd;
+	int status;
+	unsigned long result;
+	const struct i2c_adapter *adap = &priv->adapter;
+
+	if (command == I2C_SMBUS_BLOCK_PROC_CALL)
+		return -EOPNOTSUPP;
+
+	status = i801_check_pre(priv);
+	if (status < 0)
+		return status;
+
+	len = data->block[0];
+
+	if (read_write == I2C_SMBUS_WRITE) {
+		outb_p(len, SMBHSTDAT0(priv));
+		outb_p(data->block[1], SMBBLKDAT(priv));
+	}
+
+	if (command == I2C_SMBUS_I2C_BLOCK_DATA &&
+	    read_write == I2C_SMBUS_READ)
+		smbcmd = I801_I2C_BLOCK_DATA;
+	else
+		smbcmd = I801_BLOCK_DATA;
+
+	if (priv->features & FEATURE_IRQ) {
+		priv->is_read = (read_write == I2C_SMBUS_READ);
+		if (len == 1 && priv->is_read)
+			smbcmd |= SMBHSTCNT_LAST_BYTE;
+		priv->cmd = smbcmd | SMBHSTCNT_INTREN;
+		priv->len = len;
+		priv->count = 0;
+		priv->data = &data->block[1];
+
+		reinit_completion(&priv->done);
+		outb_p(priv->cmd | SMBHSTCNT_START, SMBHSTCNT(priv));
+		result = wait_for_completion_timeout(&priv->done, adap->timeout);
+		return i801_check_post(priv, result ? priv->status : -ETIMEDOUT);
+	}
+
+	if (len == 1 && read_write == I2C_SMBUS_READ)
+		smbcmd |= SMBHSTCNT_LAST_BYTE;
+	outb_p(smbcmd | SMBHSTCNT_START, SMBHSTCNT(priv));
+
+	for (i = 1; i <= len; i++) {
+		status = i801_wait_byte_done(priv);
+		if (status)
+			goto exit;
+
+		if (i == 1 && read_write == I2C_SMBUS_READ
+		 && command != I2C_SMBUS_I2C_BLOCK_DATA) {
+			len = inb_p(SMBHSTDAT0(priv));
+			if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
+				dev_err(&priv->pci_dev->dev,
+					"Illegal SMBus block read size %d\n",
+					len);
+				/* Recover */
+				while (inb_p(SMBHSTSTS(priv)) &
+				       SMBHSTSTS_HOST_BUSY)
+					outb_p(SMBHSTSTS_BYTE_DONE,
+					       SMBHSTSTS(priv));
+				outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
+				return -EPROTO;
+			}
+			data->block[0] = len;
+		}
+
+		if (read_write == I2C_SMBUS_READ) {
+			data->block[i] = inb_p(SMBBLKDAT(priv));
+			if (i == len - 1)
+				outb_p(smbcmd | SMBHSTCNT_LAST_BYTE, SMBHSTCNT(priv));
+		}
+
+		if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
+			outb_p(data->block[i+1], SMBBLKDAT(priv));
+
+		/* signals SMBBLKDAT ready */
+		outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
+	}
+
+	status = i801_wait_intr(priv);
+exit:
+	return i801_check_post(priv, status);
+}
+
+/* Block transaction function */
+static int i801_block_transaction(struct i801_priv *priv, union i2c_smbus_data *data,
+				  char read_write, int command)
+{
+	int result = 0;
+	unsigned char hostc;
+
+	if (read_write == I2C_SMBUS_READ && command == I2C_SMBUS_BLOCK_DATA)
+		data->block[0] = I2C_SMBUS_BLOCK_MAX;
+	else if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
+		return -EPROTO;
+
+	if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
+		if (read_write == I2C_SMBUS_WRITE) {
+			/* set I2C_EN bit in configuration register */
+			pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
+			pci_write_config_byte(priv->pci_dev, SMBHSTCFG,
+					      hostc | SMBHSTCFG_I2C_EN);
+		} else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
+			dev_err(&priv->pci_dev->dev,
+				"I2C block read is unsupported!\n");
+			return -EOPNOTSUPP;
+		}
+	}
+
+	/* Experience has shown that the block buffer can only be used for
+	   SMBus (not I2C) block transactions, even though the datasheet
+	   doesn't mention this limitation. */
+	if ((priv->features & FEATURE_BLOCK_BUFFER) &&
+	    command != I2C_SMBUS_I2C_BLOCK_DATA)
+		result = i801_block_transaction_by_block(priv, data,
+							 read_write,
+							 command);
+	else
+		result = i801_block_transaction_byte_by_byte(priv, data,
+							     read_write,
+							     command);
+
+	if (command == I2C_SMBUS_I2C_BLOCK_DATA
+	 && read_write == I2C_SMBUS_WRITE) {
+		/* restore saved configuration register value */
+		pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc);
+	}
+	return result;
+}
+
+/* Return negative errno on error. */
+static s32 i801_access(struct i2c_adapter *adap, u16 addr,
+		       unsigned short flags, char read_write, u8 command,
+		       int size, union i2c_smbus_data *data)
+{
+	int hwpec;
+	int block = 0;
+	int ret, xact;
+	struct i801_priv *priv = i2c_get_adapdata(adap);
+
+	mutex_lock(&priv->acpi_lock);
+	if (priv->acpi_reserved) {
+		mutex_unlock(&priv->acpi_lock);
+		return -EBUSY;
+	}
+
+	pm_runtime_get_sync(&priv->pci_dev->dev);
+
+	hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC)
+		&& size != I2C_SMBUS_QUICK
+		&& size != I2C_SMBUS_I2C_BLOCK_DATA;
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD(priv));
+		xact = I801_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD(priv));
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(command, SMBHSTCMD(priv));
+		xact = I801_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD(priv));
+		outb_p(command, SMBHSTCMD(priv));
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(data->byte, SMBHSTDAT0(priv));
+		xact = I801_BYTE_DATA;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD(priv));
+		outb_p(command, SMBHSTCMD(priv));
+		if (read_write == I2C_SMBUS_WRITE) {
+			outb_p(data->word & 0xff, SMBHSTDAT0(priv));
+			outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
+		}
+		xact = I801_WORD_DATA;
+		break;
+	case I2C_SMBUS_PROC_CALL:
+		outb_p((addr & 0x7f) << 1, SMBHSTADD(priv));
+		outb_p(command, SMBHSTCMD(priv));
+		outb_p(data->word & 0xff, SMBHSTDAT0(priv));
+		outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
+		xact = I801_PROC_CALL;
+		read_write = I2C_SMBUS_READ;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD(priv));
+		outb_p(command, SMBHSTCMD(priv));
+		block = 1;
+		break;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		/*
+		 * NB: page 240 of ICH5 datasheet shows that the R/#W
+		 * bit should be cleared here, even when reading.
+		 * However if SPD Write Disable is set (Lynx Point and later),
+		 * the read will fail if we don't set the R/#W bit.
+		 */
+		outb_p(((addr & 0x7f) << 1) |
+		       ((priv->original_hstcfg & SMBHSTCFG_SPD_WD) ?
+			(read_write & 0x01) : 0),
+		       SMBHSTADD(priv));
+		if (read_write == I2C_SMBUS_READ) {
+			/* NB: page 240 of ICH5 datasheet also shows
+			 * that DATA1 is the cmd field when reading */
+			outb_p(command, SMBHSTDAT1(priv));
+		} else
+			outb_p(command, SMBHSTCMD(priv));
+		block = 1;
+		break;
+	case I2C_SMBUS_BLOCK_PROC_CALL:
+		/*
+		 * Bit 0 of the slave address register always indicate a write
+		 * command.
+		 */
+		outb_p((addr & 0x7f) << 1, SMBHSTADD(priv));
+		outb_p(command, SMBHSTCMD(priv));
+		block = 1;
+		break;
+	default:
+		dev_err(&priv->pci_dev->dev, "Unsupported transaction %d\n",
+			size);
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if (hwpec)	/* enable/disable hardware PEC */
+		outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv));
+	else
+		outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC),
+		       SMBAUXCTL(priv));
+
+	if (block)
+		ret = i801_block_transaction(priv, data, read_write, size);
+	else
+		ret = i801_transaction(priv, xact);
+
+	/* Some BIOSes don't like it when PEC is enabled at reboot or resume
+	   time, so we forcibly disable it after every transaction. Turn off
+	   E32B for the same reason. */
+	if (hwpec || block)
+		outb_p(inb_p(SMBAUXCTL(priv)) &
+		       ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
+
+	if (block)
+		goto out;
+	if (ret)
+		goto out;
+	if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
+		goto out;
+
+	switch (xact) {
+	case I801_BYTE:	/* Result put in SMBHSTDAT0 */
+	case I801_BYTE_DATA:
+		data->byte = inb_p(SMBHSTDAT0(priv));
+		break;
+	case I801_WORD_DATA:
+	case I801_PROC_CALL:
+		data->word = inb_p(SMBHSTDAT0(priv)) +
+			     (inb_p(SMBHSTDAT1(priv)) << 8);
+		break;
+	}
+
+out:
+	/*
+	 * Unlock the SMBus device for use by BIOS/ACPI,
+	 * and clear status flags if not done already.
+	 */
+	outb_p(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv));
+
+	pm_runtime_mark_last_busy(&priv->pci_dev->dev);
+	pm_runtime_put_autosuspend(&priv->pci_dev->dev);
+	mutex_unlock(&priv->acpi_lock);
+	return ret;
+}
+
+
+static u32 i801_func(struct i2c_adapter *adapter)
+{
+	struct i801_priv *priv = i2c_get_adapdata(adapter);
+
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	       I2C_FUNC_SMBUS_PROC_CALL |
+	       I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
+	       ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
+	       ((priv->features & FEATURE_BLOCK_PROC) ?
+		I2C_FUNC_SMBUS_BLOCK_PROC_CALL : 0) |
+	       ((priv->features & FEATURE_I2C_BLOCK_READ) ?
+		I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0) |
+	       ((priv->features & FEATURE_HOST_NOTIFY) ?
+		I2C_FUNC_SMBUS_HOST_NOTIFY : 0);
+}
+
+static void i801_enable_host_notify(struct i2c_adapter *adapter)
+{
+	struct i801_priv *priv = i2c_get_adapdata(adapter);
+
+	if (!(priv->features & FEATURE_HOST_NOTIFY))
+		return;
+
+	/*
+	 * Enable host notify interrupt and block the generation of interrupt
+	 * from the SMB_ALERT signal because the driver does not support
+	 * SMBus Alert.
+	 */
+	outb_p(SMBSLVCMD_HST_NTFY_INTREN | SMBSLVCMD_SMBALERT_DISABLE |
+	       priv->original_slvcmd, SMBSLVCMD(priv));
+
+	/* clear Host Notify bit to allow a new notification */
+	outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv));
+}
+
+static void i801_disable_host_notify(struct i801_priv *priv)
+{
+	if (!(priv->features & FEATURE_HOST_NOTIFY))
+		return;
+
+	outb_p(priv->original_slvcmd, SMBSLVCMD(priv));
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+	.smbus_xfer	= i801_access,
+	.functionality	= i801_func,
+};
+
+#define FEATURES_ICH5	(FEATURE_BLOCK_PROC | FEATURE_I2C_BLOCK_READ	| \
+			 FEATURE_IRQ | FEATURE_SMBUS_PEC		| \
+			 FEATURE_BLOCK_BUFFER | FEATURE_HOST_NOTIFY)
+#define FEATURES_ICH4	(FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER | \
+			 FEATURE_HOST_NOTIFY)
+
+static const struct pci_device_id i801_ids[] = {
+	{ PCI_DEVICE_DATA(INTEL, 82801AA_3,		0)				 },
+	{ PCI_DEVICE_DATA(INTEL, 82801AB_3,		0)				 },
+	{ PCI_DEVICE_DATA(INTEL, 82801BA_2,		0)				 },
+	{ PCI_DEVICE_DATA(INTEL, 82801CA_3,		FEATURE_HOST_NOTIFY)		 },
+	{ PCI_DEVICE_DATA(INTEL, 82801DB_3,		FEATURES_ICH4)			 },
+	{ PCI_DEVICE_DATA(INTEL, 82801EB_3,		FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, ESB_4,			FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, ICH6_16,		FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, ICH7_17,		FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, ESB2_17,		FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, ICH8_5,		FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, ICH9_6,		FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, EP80579_1,		FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, ICH10_4,		FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, ICH10_5,		FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, 5_3400_SERIES_SMBUS,	FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, COUGARPOINT_SMBUS,	FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS,	FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS_IDF0,	FEATURES_ICH5 | FEATURE_IDF)	 },
+	{ PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS_IDF1,	FEATURES_ICH5 | FEATURE_IDF)	 },
+	{ PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS_IDF2,	FEATURES_ICH5 | FEATURE_IDF)	 },
+	{ PCI_DEVICE_DATA(INTEL, DH89XXCC_SMBUS,	FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, PANTHERPOINT_SMBUS,	FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, LYNXPOINT_SMBUS,	FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, LYNXPOINT_LP_SMBUS,	FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, AVOTON_SMBUS,		FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS,	FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS_MS0,	FEATURES_ICH5 | FEATURE_IDF)	 },
+	{ PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS_MS1,	FEATURES_ICH5 | FEATURE_IDF)	 },
+	{ PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS_MS2,	FEATURES_ICH5 | FEATURE_IDF)	 },
+	{ PCI_DEVICE_DATA(INTEL, COLETOCREEK_SMBUS,	FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, GEMINILAKE_SMBUS,	FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, WILDCATPOINT_SMBUS,	FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, WILDCATPOINT_LP_SMBUS,	FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, BAYTRAIL_SMBUS,	FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, BRASWELL_SMBUS,	FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, SUNRISEPOINT_H_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_SPT) },
+	{ PCI_DEVICE_DATA(INTEL, SUNRISEPOINT_LP_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_SPT) },
+	{ PCI_DEVICE_DATA(INTEL, CDF_SMBUS,		FEATURES_ICH5 | FEATURE_TCO_CNL) },
+	{ PCI_DEVICE_DATA(INTEL, DNV_SMBUS,		FEATURES_ICH5 | FEATURE_TCO_SPT) },
+	{ PCI_DEVICE_DATA(INTEL, EBG_SMBUS,		FEATURES_ICH5 | FEATURE_TCO_CNL) },
+	{ PCI_DEVICE_DATA(INTEL, BROXTON_SMBUS,		FEATURES_ICH5)			 },
+	{ PCI_DEVICE_DATA(INTEL, LEWISBURG_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_SPT) },
+	{ PCI_DEVICE_DATA(INTEL, LEWISBURG_SSKU_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_SPT) },
+	{ PCI_DEVICE_DATA(INTEL, KABYLAKE_PCH_H_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_SPT) },
+	{ PCI_DEVICE_DATA(INTEL, CANNONLAKE_H_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_CNL) },
+	{ PCI_DEVICE_DATA(INTEL, CANNONLAKE_LP_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_CNL) },
+	{ PCI_DEVICE_DATA(INTEL, ICELAKE_LP_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_CNL) },
+	{ PCI_DEVICE_DATA(INTEL, ICELAKE_N_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_CNL) },
+	{ PCI_DEVICE_DATA(INTEL, COMETLAKE_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_CNL) },
+	{ PCI_DEVICE_DATA(INTEL, COMETLAKE_H_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_CNL) },
+	{ PCI_DEVICE_DATA(INTEL, COMETLAKE_V_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_SPT) },
+	{ PCI_DEVICE_DATA(INTEL, ELKHART_LAKE_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_CNL) },
+	{ PCI_DEVICE_DATA(INTEL, TIGERLAKE_LP_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_CNL) },
+	{ PCI_DEVICE_DATA(INTEL, TIGERLAKE_H_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_CNL) },
+	{ PCI_DEVICE_DATA(INTEL, JASPER_LAKE_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_CNL) },
+	{ PCI_DEVICE_DATA(INTEL, ALDER_LAKE_S_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_CNL) },
+	{ PCI_DEVICE_DATA(INTEL, ALDER_LAKE_P_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_CNL) },
+	{ PCI_DEVICE_DATA(INTEL, ALDER_LAKE_M_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_CNL) },
+	{ PCI_DEVICE_DATA(INTEL, RAPTOR_LAKE_S_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_CNL) },
+	{ PCI_DEVICE_DATA(INTEL, METEOR_LAKE_P_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_CNL) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, i801_ids);
+
+#if defined CONFIG_X86 && defined CONFIG_DMI
+static unsigned char apanel_addr;
+
+/* Scan the system ROM for the signature "FJKEYINF" */
+static __init const void __iomem *bios_signature(const void __iomem *bios)
+{
+	ssize_t offset;
+	const unsigned char signature[] = "FJKEYINF";
+
+	for (offset = 0; offset < 0x10000; offset += 0x10) {
+		if (check_signature(bios + offset, signature,
+				    sizeof(signature)-1))
+			return bios + offset;
+	}
+	return NULL;
+}
+
+static void __init input_apanel_init(void)
+{
+	void __iomem *bios;
+	const void __iomem *p;
+
+	bios = ioremap(0xF0000, 0x10000); /* Can't fail */
+	p = bios_signature(bios);
+	if (p) {
+		/* just use the first address */
+		apanel_addr = readb(p + 8 + 3) >> 1;
+	}
+	iounmap(bios);
+}
+
+struct dmi_onboard_device_info {
+	const char *name;
+	u8 type;
+	unsigned short i2c_addr;
+	const char *i2c_type;
+};
+
+static const struct dmi_onboard_device_info dmi_devices[] = {
+	{ "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" },
+	{ "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" },
+	{ "Hades",  DMI_DEV_TYPE_OTHER, 0x73, "fschds" },
+};
+
+static void dmi_check_onboard_device(u8 type, const char *name,
+				     struct i2c_adapter *adap)
+{
+	int i;
+	struct i2c_board_info info;
+
+	for (i = 0; i < ARRAY_SIZE(dmi_devices); i++) {
+		/* & ~0x80, ignore enabled/disabled bit */
+		if ((type & ~0x80) != dmi_devices[i].type)
+			continue;
+		if (strcasecmp(name, dmi_devices[i].name))
+			continue;
+
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		info.addr = dmi_devices[i].i2c_addr;
+		strscpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE);
+		i2c_new_client_device(adap, &info);
+		break;
+	}
+}
+
+/* We use our own function to check for onboard devices instead of
+   dmi_find_device() as some buggy BIOS's have the devices we are interested
+   in marked as disabled */
+static void dmi_check_onboard_devices(const struct dmi_header *dm, void *adap)
+{
+	int i, count;
+
+	if (dm->type != 10)
+		return;
+
+	count = (dm->length - sizeof(struct dmi_header)) / 2;
+	for (i = 0; i < count; i++) {
+		const u8 *d = (char *)(dm + 1) + (i * 2);
+		const char *name = ((char *) dm) + dm->length;
+		u8 type = d[0];
+		u8 s = d[1];
+
+		if (!s)
+			continue;
+		s--;
+		while (s > 0 && name[0]) {
+			name += strlen(name) + 1;
+			s--;
+		}
+		if (name[0] == 0) /* Bogus string reference */
+			continue;
+
+		dmi_check_onboard_device(type, name, adap);
+	}
+}
+
+/* NOTE: Keep this list in sync with drivers/platform/x86/dell-smo8800.c */
+static const char *const acpi_smo8800_ids[] = {
+	"SMO8800",
+	"SMO8801",
+	"SMO8810",
+	"SMO8811",
+	"SMO8820",
+	"SMO8821",
+	"SMO8830",
+	"SMO8831",
+};
+
+static acpi_status check_acpi_smo88xx_device(acpi_handle obj_handle,
+					     u32 nesting_level,
+					     void *context,
+					     void **return_value)
+{
+	struct acpi_device_info *info;
+	acpi_status status;
+	char *hid;
+	int i;
+
+	status = acpi_get_object_info(obj_handle, &info);
+	if (ACPI_FAILURE(status))
+		return AE_OK;
+
+	if (!(info->valid & ACPI_VALID_HID))
+		goto smo88xx_not_found;
+
+	hid = info->hardware_id.string;
+	if (!hid)
+		goto smo88xx_not_found;
+
+	i = match_string(acpi_smo8800_ids, ARRAY_SIZE(acpi_smo8800_ids), hid);
+	if (i < 0)
+		goto smo88xx_not_found;
+
+	kfree(info);
+
+	*return_value = NULL;
+	return AE_CTRL_TERMINATE;
+
+smo88xx_not_found:
+	kfree(info);
+	return AE_OK;
+}
+
+static bool is_dell_system_with_lis3lv02d(void)
+{
+	void *err = ERR_PTR(-ENOENT);
+
+	if (!dmi_match(DMI_SYS_VENDOR, "Dell Inc."))
+		return false;
+
+	/*
+	 * Check that ACPI device SMO88xx is present and is functioning.
+	 * Function acpi_get_devices() already filters all ACPI devices
+	 * which are not present or are not functioning.
+	 * ACPI device SMO88xx represents our ST microelectronics lis3lv02d
+	 * accelerometer but unfortunately ACPI does not provide any other
+	 * information (like I2C address).
+	 */
+	acpi_get_devices(NULL, check_acpi_smo88xx_device, NULL, &err);
+
+	return !IS_ERR(err);
+}
+
+/*
+ * Accelerometer's I2C address is not specified in DMI nor ACPI,
+ * so it is needed to define mapping table based on DMI product names.
+ */
+static const struct {
+	const char *dmi_product_name;
+	unsigned short i2c_addr;
+} dell_lis3lv02d_devices[] = {
+	/*
+	 * Dell platform team told us that these Latitude devices have
+	 * ST microelectronics accelerometer at I2C address 0x29.
+	 */
+	{ "Latitude E5250",     0x29 },
+	{ "Latitude E5450",     0x29 },
+	{ "Latitude E5550",     0x29 },
+	{ "Latitude E6440",     0x29 },
+	{ "Latitude E6440 ATG", 0x29 },
+	{ "Latitude E6540",     0x29 },
+	/*
+	 * Additional individual entries were added after verification.
+	 */
+	{ "Latitude 5480",      0x29 },
+	{ "Vostro V131",        0x1d },
+	{ "Vostro 5568",        0x29 },
+};
+
+static void register_dell_lis3lv02d_i2c_device(struct i801_priv *priv)
+{
+	struct i2c_board_info info;
+	const char *dmi_product_name;
+	int i;
+
+	dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+	for (i = 0; i < ARRAY_SIZE(dell_lis3lv02d_devices); ++i) {
+		if (strcmp(dmi_product_name,
+			   dell_lis3lv02d_devices[i].dmi_product_name) == 0)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(dell_lis3lv02d_devices)) {
+		dev_warn(&priv->pci_dev->dev,
+			 "Accelerometer lis3lv02d is present on SMBus but its"
+			 " address is unknown, skipping registration\n");
+		return;
+	}
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = dell_lis3lv02d_devices[i].i2c_addr;
+	strscpy(info.type, "lis3lv02d", I2C_NAME_SIZE);
+	i2c_new_client_device(&priv->adapter, &info);
+}
+
+/* Register optional slaves */
+static void i801_probe_optional_slaves(struct i801_priv *priv)
+{
+	/* Only register slaves on main SMBus channel */
+	if (priv->features & FEATURE_IDF)
+		return;
+
+	if (apanel_addr) {
+		struct i2c_board_info info = {
+			.addr = apanel_addr,
+			.type = "fujitsu_apanel",
+		};
+
+		i2c_new_client_device(&priv->adapter, &info);
+	}
+
+	if (dmi_name_in_vendors("FUJITSU"))
+		dmi_walk(dmi_check_onboard_devices, &priv->adapter);
+
+	if (is_dell_system_with_lis3lv02d())
+		register_dell_lis3lv02d_i2c_device(priv);
+
+	/* Instantiate SPD EEPROMs unless the SMBus is multiplexed */
+#if IS_ENABLED(CONFIG_I2C_MUX_GPIO)
+	if (!priv->mux_drvdata)
+#endif
+		i2c_register_spd(&priv->adapter);
+}
+#else
+static void __init input_apanel_init(void) {}
+static void i801_probe_optional_slaves(struct i801_priv *priv) {}
+#endif	/* CONFIG_X86 && CONFIG_DMI */
+
+#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
+static struct i801_mux_config i801_mux_config_asus_z8_d12 = {
+	.gpio_chip = "gpio_ich",
+	.values = { 0x02, 0x03 },
+	.n_values = 2,
+	.classes = { I2C_CLASS_SPD, I2C_CLASS_SPD },
+	.gpios = { 52, 53 },
+	.n_gpios = 2,
+};
+
+static struct i801_mux_config i801_mux_config_asus_z8_d18 = {
+	.gpio_chip = "gpio_ich",
+	.values = { 0x02, 0x03, 0x01 },
+	.n_values = 3,
+	.classes = { I2C_CLASS_SPD, I2C_CLASS_SPD, I2C_CLASS_SPD },
+	.gpios = { 52, 53 },
+	.n_gpios = 2,
+};
+
+static const struct dmi_system_id mux_dmi_table[] = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "Z8NA-D6(C)"),
+		},
+		.driver_data = &i801_mux_config_asus_z8_d12,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)E-D12(X)"),
+		},
+		.driver_data = &i801_mux_config_asus_z8_d12,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "Z8NH-D12"),
+		},
+		.driver_data = &i801_mux_config_asus_z8_d12,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "Z8PH-D12/IFB"),
+		},
+		.driver_data = &i801_mux_config_asus_z8_d12,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "Z8NR-D12"),
+		},
+		.driver_data = &i801_mux_config_asus_z8_d12,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)H-D12"),
+		},
+		.driver_data = &i801_mux_config_asus_z8_d12,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "Z8PG-D18"),
+		},
+		.driver_data = &i801_mux_config_asus_z8_d18,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "Z8PE-D18"),
+		},
+		.driver_data = &i801_mux_config_asus_z8_d18,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "Z8PS-D12"),
+		},
+		.driver_data = &i801_mux_config_asus_z8_d12,
+	},
+	{ }
+};
+
+/* Setup multiplexing if needed */
+static void i801_add_mux(struct i801_priv *priv)
+{
+	struct device *dev = &priv->adapter.dev;
+	const struct i801_mux_config *mux_config;
+	struct i2c_mux_gpio_platform_data gpio_data;
+	struct gpiod_lookup_table *lookup;
+	int i;
+
+	if (!priv->mux_drvdata)
+		return;
+	mux_config = priv->mux_drvdata;
+
+	/* Prepare the platform data */
+	memset(&gpio_data, 0, sizeof(struct i2c_mux_gpio_platform_data));
+	gpio_data.parent = priv->adapter.nr;
+	gpio_data.values = mux_config->values;
+	gpio_data.n_values = mux_config->n_values;
+	gpio_data.classes = mux_config->classes;
+	gpio_data.idle = I2C_MUX_GPIO_NO_IDLE;
+
+	/* Register GPIO descriptor lookup table */
+	lookup = devm_kzalloc(dev,
+			      struct_size(lookup, table, mux_config->n_gpios + 1),
+			      GFP_KERNEL);
+	if (!lookup)
+		return;
+	lookup->dev_id = "i2c-mux-gpio";
+	for (i = 0; i < mux_config->n_gpios; i++)
+		lookup->table[i] = GPIO_LOOKUP(mux_config->gpio_chip,
+					       mux_config->gpios[i], "mux", 0);
+	gpiod_add_lookup_table(lookup);
+	priv->lookup = lookup;
+
+	/*
+	 * Register the mux device, we use PLATFORM_DEVID_NONE here
+	 * because since we are referring to the GPIO chip by name we are
+	 * anyways in deep trouble if there is more than one of these
+	 * devices, and there should likely only be one platform controller
+	 * hub.
+	 */
+	priv->mux_pdev = platform_device_register_data(dev, "i2c-mux-gpio",
+				PLATFORM_DEVID_NONE, &gpio_data,
+				sizeof(struct i2c_mux_gpio_platform_data));
+	if (IS_ERR(priv->mux_pdev)) {
+		gpiod_remove_lookup_table(lookup);
+		dev_err(dev, "Failed to register i2c-mux-gpio device\n");
+	}
+}
+
+static void i801_del_mux(struct i801_priv *priv)
+{
+	platform_device_unregister(priv->mux_pdev);
+	gpiod_remove_lookup_table(priv->lookup);
+}
+
+static unsigned int i801_get_adapter_class(struct i801_priv *priv)
+{
+	const struct dmi_system_id *id;
+	const struct i801_mux_config *mux_config;
+	unsigned int class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+	int i;
+
+	id = dmi_first_match(mux_dmi_table);
+	if (id) {
+		/* Remove branch classes from trunk */
+		mux_config = id->driver_data;
+		for (i = 0; i < mux_config->n_values; i++)
+			class &= ~mux_config->classes[i];
+
+		/* Remember for later */
+		priv->mux_drvdata = mux_config;
+	}
+
+	return class;
+}
+#else
+static inline void i801_add_mux(struct i801_priv *priv) { }
+static inline void i801_del_mux(struct i801_priv *priv) { }
+
+static inline unsigned int i801_get_adapter_class(struct i801_priv *priv)
+{
+	return I2C_CLASS_HWMON | I2C_CLASS_SPD;
+}
+#endif
+
+static struct platform_device *
+i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev,
+		 struct resource *tco_res)
+{
+	static const struct itco_wdt_platform_data pldata = {
+		.name = "Intel PCH",
+		.version = 4,
+	};
+	struct resource *res;
+	int ret;
+
+	/*
+	 * We must access the NO_REBOOT bit over the Primary to Sideband
+	 * (P2SB) bridge.
+	 */
+
+	res = &tco_res[1];
+	ret = p2sb_bar(pci_dev->bus, 0, res);
+	if (ret)
+		return ERR_PTR(ret);
+
+	if (pci_dev->device == PCI_DEVICE_ID_INTEL_DNV_SMBUS)
+		res->start += SBREG_SMBCTRL_DNV;
+	else
+		res->start += SBREG_SMBCTRL;
+
+	res->end = res->start + 3;
+
+	return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
+					tco_res, 2, &pldata, sizeof(pldata));
+}
+
+static struct platform_device *
+i801_add_tco_cnl(struct i801_priv *priv, struct pci_dev *pci_dev,
+		 struct resource *tco_res)
+{
+	static const struct itco_wdt_platform_data pldata = {
+		.name = "Intel PCH",
+		.version = 6,
+	};
+
+	return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
+						 tco_res, 1, &pldata, sizeof(pldata));
+}
+
+static void i801_add_tco(struct i801_priv *priv)
+{
+	struct pci_dev *pci_dev = priv->pci_dev;
+	struct resource tco_res[2], *res;
+	u32 tco_base, tco_ctl;
+
+	/* If we have ACPI based watchdog use that instead */
+	if (acpi_has_watchdog())
+		return;
+
+	if (!(priv->features & (FEATURE_TCO_SPT | FEATURE_TCO_CNL)))
+		return;
+
+	pci_read_config_dword(pci_dev, TCOBASE, &tco_base);
+	pci_read_config_dword(pci_dev, TCOCTL, &tco_ctl);
+	if (!(tco_ctl & TCOCTL_EN))
+		return;
+
+	memset(tco_res, 0, sizeof(tco_res));
+	/*
+	 * Always populate the main iTCO IO resource here. The second entry
+	 * for NO_REBOOT MMIO is filled by the SPT specific function.
+	 */
+	res = &tco_res[0];
+	res->start = tco_base & ~1;
+	res->end = res->start + 32 - 1;
+	res->flags = IORESOURCE_IO;
+
+	if (priv->features & FEATURE_TCO_CNL)
+		priv->tco_pdev = i801_add_tco_cnl(priv, pci_dev, tco_res);
+	else
+		priv->tco_pdev = i801_add_tco_spt(priv, pci_dev, tco_res);
+
+	if (IS_ERR(priv->tco_pdev))
+		dev_warn(&pci_dev->dev, "failed to create iTCO device\n");
+}
+
+#ifdef CONFIG_ACPI
+static bool i801_acpi_is_smbus_ioport(const struct i801_priv *priv,
+				      acpi_physical_address address)
+{
+	return address >= priv->smba &&
+	       address <= pci_resource_end(priv->pci_dev, SMBBAR);
+}
+
+static acpi_status
+i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits,
+		     u64 *value, void *handler_context, void *region_context)
+{
+	struct i801_priv *priv = handler_context;
+	struct pci_dev *pdev = priv->pci_dev;
+	acpi_status status;
+
+	/*
+	 * Once BIOS AML code touches the OpRegion we warn and inhibit any
+	 * further access from the driver itself. This device is now owned
+	 * by the system firmware.
+	 */
+	mutex_lock(&priv->acpi_lock);
+
+	if (!priv->acpi_reserved && i801_acpi_is_smbus_ioport(priv, address)) {
+		priv->acpi_reserved = true;
+
+		dev_warn(&pdev->dev, "BIOS is accessing SMBus registers\n");
+		dev_warn(&pdev->dev, "Driver SMBus register access inhibited\n");
+
+		/*
+		 * BIOS is accessing the host controller so prevent it from
+		 * suspending automatically from now on.
+		 */
+		pm_runtime_get_sync(&pdev->dev);
+	}
+
+	if ((function & ACPI_IO_MASK) == ACPI_READ)
+		status = acpi_os_read_port(address, (u32 *)value, bits);
+	else
+		status = acpi_os_write_port(address, (u32)*value, bits);
+
+	mutex_unlock(&priv->acpi_lock);
+
+	return status;
+}
+
+static int i801_acpi_probe(struct i801_priv *priv)
+{
+	acpi_handle ah = ACPI_HANDLE(&priv->pci_dev->dev);
+	acpi_status status;
+
+	status = acpi_install_address_space_handler(ah, ACPI_ADR_SPACE_SYSTEM_IO,
+						    i801_acpi_io_handler, NULL, priv);
+	if (ACPI_SUCCESS(status))
+		return 0;
+
+	return acpi_check_resource_conflict(&priv->pci_dev->resource[SMBBAR]);
+}
+
+static void i801_acpi_remove(struct i801_priv *priv)
+{
+	acpi_handle ah = ACPI_HANDLE(&priv->pci_dev->dev);
+
+	acpi_remove_address_space_handler(ah, ACPI_ADR_SPACE_SYSTEM_IO, i801_acpi_io_handler);
+}
+#else
+static inline int i801_acpi_probe(struct i801_priv *priv) { return 0; }
+static inline void i801_acpi_remove(struct i801_priv *priv) { }
+#endif
+
+static void i801_setup_hstcfg(struct i801_priv *priv)
+{
+	unsigned char hstcfg = priv->original_hstcfg;
+
+	hstcfg &= ~SMBHSTCFG_I2C_EN;	/* SMBus timing */
+	hstcfg |= SMBHSTCFG_HST_EN;
+	pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hstcfg);
+}
+
+static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	int err, i;
+	struct i801_priv *priv;
+
+	priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	i2c_set_adapdata(&priv->adapter, priv);
+	priv->adapter.owner = THIS_MODULE;
+	priv->adapter.class = i801_get_adapter_class(priv);
+	priv->adapter.algo = &smbus_algorithm;
+	priv->adapter.dev.parent = &dev->dev;
+	ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&dev->dev));
+	priv->adapter.retries = 3;
+	mutex_init(&priv->acpi_lock);
+
+	priv->pci_dev = dev;
+	priv->features = id->driver_data;
+
+	/* Disable features on user request */
+	for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) {
+		if (priv->features & disable_features & (1 << i))
+			dev_notice(&dev->dev, "%s disabled by user\n",
+				   i801_feature_names[i]);
+	}
+	priv->features &= ~disable_features;
+
+	err = pcim_enable_device(dev);
+	if (err) {
+		dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n",
+			err);
+		return err;
+	}
+	pcim_pin_device(dev);
+
+	/* Determine the address of the SMBus area */
+	priv->smba = pci_resource_start(dev, SMBBAR);
+	if (!priv->smba) {
+		dev_err(&dev->dev,
+			"SMBus base address uninitialized, upgrade BIOS\n");
+		return -ENODEV;
+	}
+
+	if (i801_acpi_probe(priv))
+		return -ENODEV;
+
+	err = pcim_iomap_regions(dev, 1 << SMBBAR, DRV_NAME);
+	if (err) {
+		dev_err(&dev->dev,
+			"Failed to request SMBus region 0x%lx-0x%Lx\n",
+			priv->smba,
+			(unsigned long long)pci_resource_end(dev, SMBBAR));
+		i801_acpi_remove(priv);
+		return err;
+	}
+
+	pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &priv->original_hstcfg);
+	i801_setup_hstcfg(priv);
+	if (!(priv->original_hstcfg & SMBHSTCFG_HST_EN))
+		dev_info(&dev->dev, "Enabling SMBus device\n");
+
+	if (priv->original_hstcfg & SMBHSTCFG_SMB_SMI_EN) {
+		dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
+		/* Disable SMBus interrupt feature if SMBus using SMI# */
+		priv->features &= ~FEATURE_IRQ;
+	}
+	if (priv->original_hstcfg & SMBHSTCFG_SPD_WD)
+		dev_info(&dev->dev, "SPD Write Disable is set\n");
+
+	/* Clear special mode bits */
+	if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
+		outb_p(inb_p(SMBAUXCTL(priv)) &
+		       ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
+
+	/* Remember original Interrupt and Host Notify settings */
+	priv->original_hstcnt = inb_p(SMBHSTCNT(priv)) & ~SMBHSTCNT_KILL;
+	if (priv->features & FEATURE_HOST_NOTIFY)
+		priv->original_slvcmd = inb_p(SMBSLVCMD(priv));
+
+	/* Default timeout in interrupt mode: 200 ms */
+	priv->adapter.timeout = HZ / 5;
+
+	if (dev->irq == IRQ_NOTCONNECTED)
+		priv->features &= ~FEATURE_IRQ;
+
+	if (priv->features & FEATURE_IRQ) {
+		u16 pcists;
+
+		/* Complain if an interrupt is already pending */
+		pci_read_config_word(priv->pci_dev, PCI_STATUS, &pcists);
+		if (pcists & PCI_STATUS_INTERRUPT)
+			dev_warn(&dev->dev, "An interrupt is pending!\n");
+	}
+
+	if (priv->features & FEATURE_IRQ) {
+		init_completion(&priv->done);
+
+		err = devm_request_irq(&dev->dev, dev->irq, i801_isr,
+				       IRQF_SHARED, DRV_NAME, priv);
+		if (err) {
+			dev_err(&dev->dev, "Failed to allocate irq %d: %d\n",
+				dev->irq, err);
+			priv->features &= ~FEATURE_IRQ;
+		}
+	}
+	dev_info(&dev->dev, "SMBus using %s\n",
+		 priv->features & FEATURE_IRQ ? "PCI interrupt" : "polling");
+
+	i801_add_tco(priv);
+
+	snprintf(priv->adapter.name, sizeof(priv->adapter.name),
+		"SMBus I801 adapter at %04lx", priv->smba);
+	err = i2c_add_adapter(&priv->adapter);
+	if (err) {
+		platform_device_unregister(priv->tco_pdev);
+		i801_acpi_remove(priv);
+		return err;
+	}
+
+	i801_enable_host_notify(&priv->adapter);
+
+	i801_probe_optional_slaves(priv);
+	/* We ignore errors - multiplexing is optional */
+	i801_add_mux(priv);
+
+	pci_set_drvdata(dev, priv);
+
+	dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
+	pm_runtime_set_autosuspend_delay(&dev->dev, 1000);
+	pm_runtime_use_autosuspend(&dev->dev);
+	pm_runtime_put_autosuspend(&dev->dev);
+	pm_runtime_allow(&dev->dev);
+
+	return 0;
+}
+
+static void i801_remove(struct pci_dev *dev)
+{
+	struct i801_priv *priv = pci_get_drvdata(dev);
+
+	outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
+	i801_disable_host_notify(priv);
+	i801_del_mux(priv);
+	i2c_del_adapter(&priv->adapter);
+	i801_acpi_remove(priv);
+	pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
+
+	platform_device_unregister(priv->tco_pdev);
+
+	/* if acpi_reserved is set then usage_count is incremented already */
+	if (!priv->acpi_reserved)
+		pm_runtime_get_noresume(&dev->dev);
+
+	/*
+	 * do not call pci_disable_device(dev) since it can cause hard hangs on
+	 * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)
+	 */
+}
+
+static void i801_shutdown(struct pci_dev *dev)
+{
+	struct i801_priv *priv = pci_get_drvdata(dev);
+
+	/* Restore config registers to avoid hard hang on some systems */
+	outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
+	i801_disable_host_notify(priv);
+	pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int i801_suspend(struct device *dev)
+{
+	struct i801_priv *priv = dev_get_drvdata(dev);
+
+	outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
+	pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg);
+	return 0;
+}
+
+static int i801_resume(struct device *dev)
+{
+	struct i801_priv *priv = dev_get_drvdata(dev);
+
+	i801_setup_hstcfg(priv);
+	i801_enable_host_notify(&priv->adapter);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(i801_pm_ops, i801_suspend, i801_resume);
+
+static struct pci_driver i801_driver = {
+	.name		= DRV_NAME,
+	.id_table	= i801_ids,
+	.probe		= i801_probe,
+	.remove		= i801_remove,
+	.shutdown	= i801_shutdown,
+	.driver		= {
+		.pm	= &i801_pm_ops,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+};
+
+static int __init i2c_i801_init(void)
+{
+	if (dmi_name_in_vendors("FUJITSU"))
+		input_apanel_init();
+	return pci_register_driver(&i801_driver);
+}
+
+static void __exit i2c_i801_exit(void)
+{
+	pci_unregister_driver(&i801_driver);
+}
+
+MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
+MODULE_DESCRIPTION("I801 SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_i801_init);
+module_exit(i2c_i801_exit);