Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1119 insertions, 0 deletions

diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
new file mode 100644
index 000000000..faf680140
--- /dev/null
+++ b/drivers/iio/adc/ad7192.c
@@ -0,0 +1,1119 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AD7190 AD7192 AD7193 AD7195 SPI ADC driver
+ *
+ * Copyright 2011-2015 Analog Devices Inc.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/of_device.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/adc/ad_sigma_delta.h>
+
+/* Registers */
+#define AD7192_REG_COMM		0 /* Communications Register (WO, 8-bit) */
+#define AD7192_REG_STAT		0 /* Status Register	     (RO, 8-bit) */
+#define AD7192_REG_MODE		1 /* Mode Register	     (RW, 24-bit */
+#define AD7192_REG_CONF		2 /* Configuration Register  (RW, 24-bit) */
+#define AD7192_REG_DATA		3 /* Data Register	     (RO, 24/32-bit) */
+#define AD7192_REG_ID		4 /* ID Register	     (RO, 8-bit) */
+#define AD7192_REG_GPOCON	5 /* GPOCON Register	     (RO, 8-bit) */
+#define AD7192_REG_OFFSET	6 /* Offset Register	     (RW, 16-bit */
+				  /* (AD7792)/24-bit (AD7192)) */
+#define AD7192_REG_FULLSALE	7 /* Full-Scale Register */
+				  /* (RW, 16-bit (AD7792)/24-bit (AD7192)) */
+
+/* Communications Register Bit Designations (AD7192_REG_COMM) */
+#define AD7192_COMM_WEN		BIT(7) /* Write Enable */
+#define AD7192_COMM_WRITE	0 /* Write Operation */
+#define AD7192_COMM_READ	BIT(6) /* Read Operation */
+#define AD7192_COMM_ADDR(x)	(((x) & 0x7) << 3) /* Register Address */
+#define AD7192_COMM_CREAD	BIT(2) /* Continuous Read of Data Register */
+
+/* Status Register Bit Designations (AD7192_REG_STAT) */
+#define AD7192_STAT_RDY		BIT(7) /* Ready */
+#define AD7192_STAT_ERR		BIT(6) /* Error (Overrange, Underrange) */
+#define AD7192_STAT_NOREF	BIT(5) /* Error no external reference */
+#define AD7192_STAT_PARITY	BIT(4) /* Parity */
+#define AD7192_STAT_CH3		BIT(2) /* Channel 3 */
+#define AD7192_STAT_CH2		BIT(1) /* Channel 2 */
+#define AD7192_STAT_CH1		BIT(0) /* Channel 1 */
+
+/* Mode Register Bit Designations (AD7192_REG_MODE) */
+#define AD7192_MODE_SEL(x)	(((x) & 0x7) << 21) /* Operation Mode Select */
+#define AD7192_MODE_SEL_MASK	(0x7 << 21) /* Operation Mode Select Mask */
+#define AD7192_MODE_STA(x)	(((x) & 0x1) << 20) /* Status Register transmission */
+#define AD7192_MODE_STA_MASK	BIT(20) /* Status Register transmission Mask */
+#define AD7192_MODE_CLKSRC(x)	(((x) & 0x3) << 18) /* Clock Source Select */
+#define AD7192_MODE_SINC3	BIT(15) /* SINC3 Filter Select */
+#define AD7192_MODE_ENPAR	BIT(13) /* Parity Enable */
+#define AD7192_MODE_CLKDIV	BIT(12) /* Clock divide by 2 (AD7190/2 only)*/
+#define AD7192_MODE_SCYCLE	BIT(11) /* Single cycle conversion */
+#define AD7192_MODE_REJ60	BIT(10) /* 50/60Hz notch filter */
+#define AD7192_MODE_RATE(x)	((x) & 0x3FF) /* Filter Update Rate Select */
+
+/* Mode Register: AD7192_MODE_SEL options */
+#define AD7192_MODE_CONT		0 /* Continuous Conversion Mode */
+#define AD7192_MODE_SINGLE		1 /* Single Conversion Mode */
+#define AD7192_MODE_IDLE		2 /* Idle Mode */
+#define AD7192_MODE_PWRDN		3 /* Power-Down Mode */
+#define AD7192_MODE_CAL_INT_ZERO	4 /* Internal Zero-Scale Calibration */
+#define AD7192_MODE_CAL_INT_FULL	5 /* Internal Full-Scale Calibration */
+#define AD7192_MODE_CAL_SYS_ZERO	6 /* System Zero-Scale Calibration */
+#define AD7192_MODE_CAL_SYS_FULL	7 /* System Full-Scale Calibration */
+
+/* Mode Register: AD7192_MODE_CLKSRC options */
+#define AD7192_CLK_EXT_MCLK1_2		0 /* External 4.92 MHz Clock connected*/
+					  /* from MCLK1 to MCLK2 */
+#define AD7192_CLK_EXT_MCLK2		1 /* External Clock applied to MCLK2 */
+#define AD7192_CLK_INT			2 /* Internal 4.92 MHz Clock not */
+					  /* available at the MCLK2 pin */
+#define AD7192_CLK_INT_CO		3 /* Internal 4.92 MHz Clock available*/
+					  /* at the MCLK2 pin */
+
+/* Configuration Register Bit Designations (AD7192_REG_CONF) */
+
+#define AD7192_CONF_CHOP	BIT(23) /* CHOP enable */
+#define AD7192_CONF_ACX		BIT(22) /* AC excitation enable(AD7195 only) */
+#define AD7192_CONF_REFSEL	BIT(20) /* REFIN1/REFIN2 Reference Select */
+#define AD7192_CONF_CHAN(x)	((x) << 8) /* Channel select */
+#define AD7192_CONF_CHAN_MASK	(0x7FF << 8) /* Channel select mask */
+#define AD7192_CONF_BURN	BIT(7) /* Burnout current enable */
+#define AD7192_CONF_REFDET	BIT(6) /* Reference detect enable */
+#define AD7192_CONF_BUF		BIT(4) /* Buffered Mode Enable */
+#define AD7192_CONF_UNIPOLAR	BIT(3) /* Unipolar/Bipolar Enable */
+#define AD7192_CONF_GAIN(x)	((x) & 0x7) /* Gain Select */
+
+#define AD7192_CH_AIN1P_AIN2M	BIT(0) /* AIN1(+) - AIN2(-) */
+#define AD7192_CH_AIN3P_AIN4M	BIT(1) /* AIN3(+) - AIN4(-) */
+#define AD7192_CH_TEMP		BIT(2) /* Temp Sensor */
+#define AD7192_CH_AIN2P_AIN2M	BIT(3) /* AIN2(+) - AIN2(-) */
+#define AD7192_CH_AIN1		BIT(4) /* AIN1 - AINCOM */
+#define AD7192_CH_AIN2		BIT(5) /* AIN2 - AINCOM */
+#define AD7192_CH_AIN3		BIT(6) /* AIN3 - AINCOM */
+#define AD7192_CH_AIN4		BIT(7) /* AIN4 - AINCOM */
+
+#define AD7193_CH_AIN1P_AIN2M	0x001  /* AIN1(+) - AIN2(-) */
+#define AD7193_CH_AIN3P_AIN4M	0x002  /* AIN3(+) - AIN4(-) */
+#define AD7193_CH_AIN5P_AIN6M	0x004  /* AIN5(+) - AIN6(-) */
+#define AD7193_CH_AIN7P_AIN8M	0x008  /* AIN7(+) - AIN8(-) */
+#define AD7193_CH_TEMP		0x100 /* Temp senseor */
+#define AD7193_CH_AIN2P_AIN2M	0x200 /* AIN2(+) - AIN2(-) */
+#define AD7193_CH_AIN1		0x401 /* AIN1 - AINCOM */
+#define AD7193_CH_AIN2		0x402 /* AIN2 - AINCOM */
+#define AD7193_CH_AIN3		0x404 /* AIN3 - AINCOM */
+#define AD7193_CH_AIN4		0x408 /* AIN4 - AINCOM */
+#define AD7193_CH_AIN5		0x410 /* AIN5 - AINCOM */
+#define AD7193_CH_AIN6		0x420 /* AIN6 - AINCOM */
+#define AD7193_CH_AIN7		0x440 /* AIN7 - AINCOM */
+#define AD7193_CH_AIN8		0x480 /* AIN7 - AINCOM */
+#define AD7193_CH_AINCOM	0x600 /* AINCOM - AINCOM */
+
+/* ID Register Bit Designations (AD7192_REG_ID) */
+#define CHIPID_AD7190		0x4
+#define CHIPID_AD7192		0x0
+#define CHIPID_AD7193		0x2
+#define CHIPID_AD7195		0x6
+#define AD7192_ID_MASK		0x0F
+
+/* GPOCON Register Bit Designations (AD7192_REG_GPOCON) */
+#define AD7192_GPOCON_BPDSW	BIT(6) /* Bridge power-down switch enable */
+#define AD7192_GPOCON_GP32EN	BIT(5) /* Digital Output P3 and P2 enable */
+#define AD7192_GPOCON_GP10EN	BIT(4) /* Digital Output P1 and P0 enable */
+#define AD7192_GPOCON_P3DAT	BIT(3) /* P3 state */
+#define AD7192_GPOCON_P2DAT	BIT(2) /* P2 state */
+#define AD7192_GPOCON_P1DAT	BIT(1) /* P1 state */
+#define AD7192_GPOCON_P0DAT	BIT(0) /* P0 state */
+
+#define AD7192_EXT_FREQ_MHZ_MIN	2457600
+#define AD7192_EXT_FREQ_MHZ_MAX	5120000
+#define AD7192_INT_FREQ_MHZ	4915200
+
+#define AD7192_NO_SYNC_FILTER	1
+#define AD7192_SYNC3_FILTER	3
+#define AD7192_SYNC4_FILTER	4
+
+/* NOTE:
+ * The AD7190/2/5 features a dual use data out ready DOUT/RDY output.
+ * In order to avoid contentions on the SPI bus, it's therefore necessary
+ * to use spi bus locking.
+ *
+ * The DOUT/RDY output must also be wired to an interrupt capable GPIO.
+ */
+
+enum {
+	AD7192_SYSCALIB_ZERO_SCALE,
+	AD7192_SYSCALIB_FULL_SCALE,
+};
+
+enum {
+	ID_AD7190,
+	ID_AD7192,
+	ID_AD7193,
+	ID_AD7195,
+};
+
+struct ad7192_chip_info {
+	unsigned int			chip_id;
+	const char			*name;
+};
+
+struct ad7192_state {
+	const struct ad7192_chip_info	*chip_info;
+	struct regulator		*avdd;
+	struct regulator		*vref;
+	struct clk			*mclk;
+	u16				int_vref_mv;
+	u32				fclk;
+	u32				f_order;
+	u32				mode;
+	u32				conf;
+	u32				scale_avail[8][2];
+	u8				gpocon;
+	u8				clock_sel;
+	struct mutex			lock;	/* protect sensor state */
+	u8				syscalib_mode[8];
+
+	struct ad_sigma_delta		sd;
+};
+
+static const char * const ad7192_syscalib_modes[] = {
+	[AD7192_SYSCALIB_ZERO_SCALE] = "zero_scale",
+	[AD7192_SYSCALIB_FULL_SCALE] = "full_scale",
+};
+
+static int ad7192_set_syscalib_mode(struct iio_dev *indio_dev,
+				    const struct iio_chan_spec *chan,
+				    unsigned int mode)
+{
+	struct ad7192_state *st = iio_priv(indio_dev);
+
+	st->syscalib_mode[chan->channel] = mode;
+
+	return 0;
+}
+
+static int ad7192_get_syscalib_mode(struct iio_dev *indio_dev,
+				    const struct iio_chan_spec *chan)
+{
+	struct ad7192_state *st = iio_priv(indio_dev);
+
+	return st->syscalib_mode[chan->channel];
+}
+
+static ssize_t ad7192_write_syscalib(struct iio_dev *indio_dev,
+				     uintptr_t private,
+				     const struct iio_chan_spec *chan,
+				     const char *buf, size_t len)
+{
+	struct ad7192_state *st = iio_priv(indio_dev);
+	bool sys_calib;
+	int ret, temp;
+
+	ret = kstrtobool(buf, &sys_calib);
+	if (ret)
+		return ret;
+
+	temp = st->syscalib_mode[chan->channel];
+	if (sys_calib) {
+		if (temp == AD7192_SYSCALIB_ZERO_SCALE)
+			ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_ZERO,
+					      chan->address);
+		else
+			ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_FULL,
+					      chan->address);
+	}
+
+	return ret ? ret : len;
+}
+
+static const struct iio_enum ad7192_syscalib_mode_enum = {
+	.items = ad7192_syscalib_modes,
+	.num_items = ARRAY_SIZE(ad7192_syscalib_modes),
+	.set = ad7192_set_syscalib_mode,
+	.get = ad7192_get_syscalib_mode
+};
+
+static const struct iio_chan_spec_ext_info ad7192_calibsys_ext_info[] = {
+	{
+		.name = "sys_calibration",
+		.write = ad7192_write_syscalib,
+		.shared = IIO_SEPARATE,
+	},
+	IIO_ENUM("sys_calibration_mode", IIO_SEPARATE,
+		 &ad7192_syscalib_mode_enum),
+	IIO_ENUM_AVAILABLE("sys_calibration_mode", IIO_SHARED_BY_TYPE,
+			   &ad7192_syscalib_mode_enum),
+	{}
+};
+
+static struct ad7192_state *ad_sigma_delta_to_ad7192(struct ad_sigma_delta *sd)
+{
+	return container_of(sd, struct ad7192_state, sd);
+}
+
+static int ad7192_set_channel(struct ad_sigma_delta *sd, unsigned int channel)
+{
+	struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd);
+
+	st->conf &= ~AD7192_CONF_CHAN_MASK;
+	st->conf |= AD7192_CONF_CHAN(channel);
+
+	return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf);
+}
+
+static int ad7192_set_mode(struct ad_sigma_delta *sd,
+			   enum ad_sigma_delta_mode mode)
+{
+	struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd);
+
+	st->mode &= ~AD7192_MODE_SEL_MASK;
+	st->mode |= AD7192_MODE_SEL(mode);
+
+	return ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
+}
+
+static int ad7192_append_status(struct ad_sigma_delta *sd, bool append)
+{
+	struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd);
+	unsigned int mode = st->mode;
+	int ret;
+
+	mode &= ~AD7192_MODE_STA_MASK;
+	mode |= AD7192_MODE_STA(append);
+
+	ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, mode);
+	if (ret < 0)
+		return ret;
+
+	st->mode = mode;
+
+	return 0;
+}
+
+static int ad7192_disable_all(struct ad_sigma_delta *sd)
+{
+	struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd);
+	u32 conf = st->conf;
+	int ret;
+
+	conf &= ~AD7192_CONF_CHAN_MASK;
+
+	ret = ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, conf);
+	if (ret < 0)
+		return ret;
+
+	st->conf = conf;
+
+	return 0;
+}
+
+static const struct ad_sigma_delta_info ad7192_sigma_delta_info = {
+	.set_channel = ad7192_set_channel,
+	.append_status = ad7192_append_status,
+	.disable_all = ad7192_disable_all,
+	.set_mode = ad7192_set_mode,
+	.has_registers = true,
+	.addr_shift = 3,
+	.read_mask = BIT(6),
+	.status_ch_mask = GENMASK(3, 0),
+	.num_slots = 4,
+	.irq_flags = IRQF_TRIGGER_FALLING,
+};
+
+static const struct ad_sd_calib_data ad7192_calib_arr[8] = {
+	{AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN1},
+	{AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN1},
+	{AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN2},
+	{AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN2},
+	{AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN3},
+	{AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN3},
+	{AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN4},
+	{AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN4}
+};
+
+static int ad7192_calibrate_all(struct ad7192_state *st)
+{
+	return ad_sd_calibrate_all(&st->sd, ad7192_calib_arr,
+				   ARRAY_SIZE(ad7192_calib_arr));
+}
+
+static inline bool ad7192_valid_external_frequency(u32 freq)
+{
+	return (freq >= AD7192_EXT_FREQ_MHZ_MIN &&
+		freq <= AD7192_EXT_FREQ_MHZ_MAX);
+}
+
+static int ad7192_of_clock_select(struct ad7192_state *st)
+{
+	struct device_node *np = st->sd.spi->dev.of_node;
+	unsigned int clock_sel;
+
+	clock_sel = AD7192_CLK_INT;
+
+	/* use internal clock */
+	if (!st->mclk) {
+		if (of_property_read_bool(np, "adi,int-clock-output-enable"))
+			clock_sel = AD7192_CLK_INT_CO;
+	} else {
+		if (of_property_read_bool(np, "adi,clock-xtal"))
+			clock_sel = AD7192_CLK_EXT_MCLK1_2;
+		else
+			clock_sel = AD7192_CLK_EXT_MCLK2;
+	}
+
+	return clock_sel;
+}
+
+static int ad7192_setup(struct iio_dev *indio_dev, struct device_node *np)
+{
+	struct ad7192_state *st = iio_priv(indio_dev);
+	bool rej60_en, refin2_en;
+	bool buf_en, bipolar, burnout_curr_en;
+	unsigned long long scale_uv;
+	int i, ret, id;
+
+	/* reset the serial interface */
+	ret = ad_sd_reset(&st->sd, 48);
+	if (ret < 0)
+		return ret;
+	usleep_range(500, 1000); /* Wait for at least 500us */
+
+	/* write/read test for device presence */
+	ret = ad_sd_read_reg(&st->sd, AD7192_REG_ID, 1, &id);
+	if (ret)
+		return ret;
+
+	id &= AD7192_ID_MASK;
+
+	if (id != st->chip_info->chip_id)
+		dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X)\n",
+			 id);
+
+	st->mode = AD7192_MODE_SEL(AD7192_MODE_IDLE) |
+		AD7192_MODE_CLKSRC(st->clock_sel) |
+		AD7192_MODE_RATE(480);
+
+	st->conf = AD7192_CONF_GAIN(0);
+
+	rej60_en = of_property_read_bool(np, "adi,rejection-60-Hz-enable");
+	if (rej60_en)
+		st->mode |= AD7192_MODE_REJ60;
+
+	refin2_en = of_property_read_bool(np, "adi,refin2-pins-enable");
+	if (refin2_en && st->chip_info->chip_id != CHIPID_AD7195)
+		st->conf |= AD7192_CONF_REFSEL;
+
+	st->conf &= ~AD7192_CONF_CHOP;
+	st->f_order = AD7192_NO_SYNC_FILTER;
+
+	buf_en = of_property_read_bool(np, "adi,buffer-enable");
+	if (buf_en)
+		st->conf |= AD7192_CONF_BUF;
+
+	bipolar = of_property_read_bool(np, "bipolar");
+	if (!bipolar)
+		st->conf |= AD7192_CONF_UNIPOLAR;
+
+	burnout_curr_en = of_property_read_bool(np,
+						"adi,burnout-currents-enable");
+	if (burnout_curr_en && buf_en) {
+		st->conf |= AD7192_CONF_BURN;
+	} else if (burnout_curr_en) {
+		dev_warn(&st->sd.spi->dev,
+			 "Can't enable burnout currents: see CHOP or buffer\n");
+	}
+
+	ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
+	if (ret)
+		return ret;
+
+	ret = ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf);
+	if (ret)
+		return ret;
+
+	ret = ad7192_calibrate_all(st);
+	if (ret)
+		return ret;
+
+	/* Populate available ADC input ranges */
+	for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) {
+		scale_uv = ((u64)st->int_vref_mv * 100000000)
+			>> (indio_dev->channels[0].scan_type.realbits -
+			((st->conf & AD7192_CONF_UNIPOLAR) ? 0 : 1));
+		scale_uv >>= i;
+
+		st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10;
+		st->scale_avail[i][0] = scale_uv;
+	}
+
+	return 0;
+}
+
+static ssize_t ad7192_show_ac_excitation(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct ad7192_state *st = iio_priv(indio_dev);
+
+	return sysfs_emit(buf, "%d\n", !!(st->conf & AD7192_CONF_ACX));
+}
+
+static ssize_t ad7192_show_bridge_switch(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct ad7192_state *st = iio_priv(indio_dev);
+
+	return sysfs_emit(buf, "%d\n", !!(st->gpocon & AD7192_GPOCON_BPDSW));
+}
+
+static ssize_t ad7192_set(struct device *dev,
+			  struct device_attribute *attr,
+			  const char *buf,
+			  size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct ad7192_state *st = iio_priv(indio_dev);
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	int ret;
+	bool val;
+
+	ret = kstrtobool(buf, &val);
+	if (ret < 0)
+		return ret;
+
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
+
+	switch ((u32)this_attr->address) {
+	case AD7192_REG_GPOCON:
+		if (val)
+			st->gpocon |= AD7192_GPOCON_BPDSW;
+		else
+			st->gpocon &= ~AD7192_GPOCON_BPDSW;
+
+		ad_sd_write_reg(&st->sd, AD7192_REG_GPOCON, 1, st->gpocon);
+		break;
+	case AD7192_REG_CONF:
+		if (val)
+			st->conf |= AD7192_CONF_ACX;
+		else
+			st->conf &= ~AD7192_CONF_ACX;
+
+		ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	iio_device_release_direct_mode(indio_dev);
+
+	return ret ? ret : len;
+}
+
+static void ad7192_get_available_filter_freq(struct ad7192_state *st,
+						    int *freq)
+{
+	unsigned int fadc;
+
+	/* Formulas for filter at page 25 of the datasheet */
+	fadc = DIV_ROUND_CLOSEST(st->fclk,
+				 AD7192_SYNC4_FILTER * AD7192_MODE_RATE(st->mode));
+	freq[0] = DIV_ROUND_CLOSEST(fadc * 240, 1024);
+
+	fadc = DIV_ROUND_CLOSEST(st->fclk,
+				 AD7192_SYNC3_FILTER * AD7192_MODE_RATE(st->mode));
+	freq[1] = DIV_ROUND_CLOSEST(fadc * 240, 1024);
+
+	fadc = DIV_ROUND_CLOSEST(st->fclk, AD7192_MODE_RATE(st->mode));
+	freq[2] = DIV_ROUND_CLOSEST(fadc * 230, 1024);
+	freq[3] = DIV_ROUND_CLOSEST(fadc * 272, 1024);
+}
+
+static ssize_t ad7192_show_filter_avail(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct ad7192_state *st = iio_priv(indio_dev);
+	unsigned int freq_avail[4], i;
+	size_t len = 0;
+
+	ad7192_get_available_filter_freq(st, freq_avail);
+
+	for (i = 0; i < ARRAY_SIZE(freq_avail); i++)
+		len += scnprintf(buf + len, PAGE_SIZE - len,
+				 "%d.%d ", freq_avail[i] / 1000,
+				 freq_avail[i] % 1000);
+
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static IIO_DEVICE_ATTR(filter_low_pass_3db_frequency_available,
+		       0444, ad7192_show_filter_avail, NULL, 0);
+
+static IIO_DEVICE_ATTR(bridge_switch_en, 0644,
+		       ad7192_show_bridge_switch, ad7192_set,
+		       AD7192_REG_GPOCON);
+
+static IIO_DEVICE_ATTR(ac_excitation_en, 0644,
+		       ad7192_show_ac_excitation, ad7192_set,
+		       AD7192_REG_CONF);
+
+static struct attribute *ad7192_attributes[] = {
+	&iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr,
+	&iio_dev_attr_bridge_switch_en.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group ad7192_attribute_group = {
+	.attrs = ad7192_attributes,
+};
+
+static struct attribute *ad7195_attributes[] = {
+	&iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr,
+	&iio_dev_attr_bridge_switch_en.dev_attr.attr,
+	&iio_dev_attr_ac_excitation_en.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group ad7195_attribute_group = {
+	.attrs = ad7195_attributes,
+};
+
+static unsigned int ad7192_get_temp_scale(bool unipolar)
+{
+	return unipolar ? 2815 * 2 : 2815;
+}
+
+static int ad7192_set_3db_filter_freq(struct ad7192_state *st,
+				      int val, int val2)
+{
+	int freq_avail[4], i, ret, freq;
+	unsigned int diff_new, diff_old;
+	int idx = 0;
+
+	diff_old = U32_MAX;
+	freq = val * 1000 + val2;
+
+	ad7192_get_available_filter_freq(st, freq_avail);
+
+	for (i = 0; i < ARRAY_SIZE(freq_avail); i++) {
+		diff_new = abs(freq - freq_avail[i]);
+		if (diff_new < diff_old) {
+			diff_old = diff_new;
+			idx = i;
+		}
+	}
+
+	switch (idx) {
+	case 0:
+		st->f_order = AD7192_SYNC4_FILTER;
+		st->mode &= ~AD7192_MODE_SINC3;
+
+		st->conf |= AD7192_CONF_CHOP;
+		break;
+	case 1:
+		st->f_order = AD7192_SYNC3_FILTER;
+		st->mode |= AD7192_MODE_SINC3;
+
+		st->conf |= AD7192_CONF_CHOP;
+		break;
+	case 2:
+		st->f_order = AD7192_NO_SYNC_FILTER;
+		st->mode &= ~AD7192_MODE_SINC3;
+
+		st->conf &= ~AD7192_CONF_CHOP;
+		break;
+	case 3:
+		st->f_order = AD7192_NO_SYNC_FILTER;
+		st->mode |= AD7192_MODE_SINC3;
+
+		st->conf &= ~AD7192_CONF_CHOP;
+		break;
+	}
+
+	ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
+	if (ret < 0)
+		return ret;
+
+	return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf);
+}
+
+static int ad7192_get_3db_filter_freq(struct ad7192_state *st)
+{
+	unsigned int fadc;
+
+	fadc = DIV_ROUND_CLOSEST(st->fclk,
+				 st->f_order * AD7192_MODE_RATE(st->mode));
+
+	if (st->conf & AD7192_CONF_CHOP)
+		return DIV_ROUND_CLOSEST(fadc * 240, 1024);
+	if (st->mode & AD7192_MODE_SINC3)
+		return DIV_ROUND_CLOSEST(fadc * 272, 1024);
+	else
+		return DIV_ROUND_CLOSEST(fadc * 230, 1024);
+}
+
+static int ad7192_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val,
+			   int *val2,
+			   long m)
+{
+	struct ad7192_state *st = iio_priv(indio_dev);
+	bool unipolar = !!(st->conf & AD7192_CONF_UNIPOLAR);
+
+	switch (m) {
+	case IIO_CHAN_INFO_RAW:
+		return ad_sigma_delta_single_conversion(indio_dev, chan, val);
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_VOLTAGE:
+			mutex_lock(&st->lock);
+			*val = st->scale_avail[AD7192_CONF_GAIN(st->conf)][0];
+			*val2 = st->scale_avail[AD7192_CONF_GAIN(st->conf)][1];
+			mutex_unlock(&st->lock);
+			return IIO_VAL_INT_PLUS_NANO;
+		case IIO_TEMP:
+			*val = 0;
+			*val2 = 1000000000 / ad7192_get_temp_scale(unipolar);
+			return IIO_VAL_INT_PLUS_NANO;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_OFFSET:
+		if (!unipolar)
+			*val = -(1 << (chan->scan_type.realbits - 1));
+		else
+			*val = 0;
+		/* Kelvin to Celsius */
+		if (chan->type == IIO_TEMP)
+			*val -= 273 * ad7192_get_temp_scale(unipolar);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = st->fclk /
+			(st->f_order * 1024 * AD7192_MODE_RATE(st->mode));
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		*val = ad7192_get_3db_filter_freq(st);
+		*val2 = 1000;
+		return IIO_VAL_FRACTIONAL;
+	}
+
+	return -EINVAL;
+}
+
+static int ad7192_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val,
+			    int val2,
+			    long mask)
+{
+	struct ad7192_state *st = iio_priv(indio_dev);
+	int ret, i, div;
+	unsigned int tmp;
+
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		ret = -EINVAL;
+		mutex_lock(&st->lock);
+		for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++)
+			if (val2 == st->scale_avail[i][1]) {
+				ret = 0;
+				tmp = st->conf;
+				st->conf &= ~AD7192_CONF_GAIN(-1);
+				st->conf |= AD7192_CONF_GAIN(i);
+				if (tmp == st->conf)
+					break;
+				ad_sd_write_reg(&st->sd, AD7192_REG_CONF,
+						3, st->conf);
+				ad7192_calibrate_all(st);
+				break;
+			}
+		mutex_unlock(&st->lock);
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (!val) {
+			ret = -EINVAL;
+			break;
+		}
+
+		div = st->fclk / (val * st->f_order * 1024);
+		if (div < 1 || div > 1023) {
+			ret = -EINVAL;
+			break;
+		}
+
+		st->mode &= ~AD7192_MODE_RATE(-1);
+		st->mode |= AD7192_MODE_RATE(div);
+		ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
+		break;
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		ret = ad7192_set_3db_filter_freq(st, val, val2 / 1000);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	iio_device_release_direct_mode(indio_dev);
+
+	return ret;
+}
+
+static int ad7192_write_raw_get_fmt(struct iio_dev *indio_dev,
+				    struct iio_chan_spec const *chan,
+				    long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ad7192_read_avail(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     const int **vals, int *type, int *length,
+			     long mask)
+{
+	struct ad7192_state *st = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		*vals = (int *)st->scale_avail;
+		*type = IIO_VAL_INT_PLUS_NANO;
+		/* Values are stored in a 2D matrix  */
+		*length = ARRAY_SIZE(st->scale_avail) * 2;
+
+		return IIO_AVAIL_LIST;
+	}
+
+	return -EINVAL;
+}
+
+static int ad7192_update_scan_mode(struct iio_dev *indio_dev, const unsigned long *scan_mask)
+{
+	struct ad7192_state *st = iio_priv(indio_dev);
+	u32 conf = st->conf;
+	int ret;
+	int i;
+
+	conf &= ~AD7192_CONF_CHAN_MASK;
+	for_each_set_bit(i, scan_mask, 8)
+		conf |= AD7192_CONF_CHAN(i);
+
+	ret = ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, conf);
+	if (ret < 0)
+		return ret;
+
+	st->conf = conf;
+
+	return 0;
+}
+
+static const struct iio_info ad7192_info = {
+	.read_raw = ad7192_read_raw,
+	.write_raw = ad7192_write_raw,
+	.write_raw_get_fmt = ad7192_write_raw_get_fmt,
+	.read_avail = ad7192_read_avail,
+	.attrs = &ad7192_attribute_group,
+	.validate_trigger = ad_sd_validate_trigger,
+	.update_scan_mode = ad7192_update_scan_mode,
+};
+
+static const struct iio_info ad7195_info = {
+	.read_raw = ad7192_read_raw,
+	.write_raw = ad7192_write_raw,
+	.write_raw_get_fmt = ad7192_write_raw_get_fmt,
+	.read_avail = ad7192_read_avail,
+	.attrs = &ad7195_attribute_group,
+	.validate_trigger = ad_sd_validate_trigger,
+	.update_scan_mode = ad7192_update_scan_mode,
+};
+
+#define __AD719x_CHANNEL(_si, _channel1, _channel2, _address, _extend_name, \
+	_type, _mask_type_av, _ext_info) \
+	{ \
+		.type = (_type), \
+		.differential = ((_channel2) == -1 ? 0 : 1), \
+		.indexed = 1, \
+		.channel = (_channel1), \
+		.channel2 = (_channel2), \
+		.address = (_address), \
+		.extend_name = (_extend_name), \
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+			BIT(IIO_CHAN_INFO_OFFSET), \
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+			BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
+		.info_mask_shared_by_type_available = (_mask_type_av), \
+		.ext_info = (_ext_info), \
+		.scan_index = (_si), \
+		.scan_type = { \
+			.sign = 'u', \
+			.realbits = 24, \
+			.storagebits = 32, \
+			.endianness = IIO_BE, \
+		}, \
+	}
+
+#define AD719x_DIFF_CHANNEL(_si, _channel1, _channel2, _address) \
+	__AD719x_CHANNEL(_si, _channel1, _channel2, _address, NULL, \
+		IIO_VOLTAGE, BIT(IIO_CHAN_INFO_SCALE), \
+		ad7192_calibsys_ext_info)
+
+#define AD719x_CHANNEL(_si, _channel1, _address) \
+	__AD719x_CHANNEL(_si, _channel1, -1, _address, NULL, IIO_VOLTAGE, \
+		BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info)
+
+#define AD719x_TEMP_CHANNEL(_si, _address) \
+	__AD719x_CHANNEL(_si, 0, -1, _address, NULL, IIO_TEMP, 0, NULL)
+
+static const struct iio_chan_spec ad7192_channels[] = {
+	AD719x_DIFF_CHANNEL(0, 1, 2, AD7192_CH_AIN1P_AIN2M),
+	AD719x_DIFF_CHANNEL(1, 3, 4, AD7192_CH_AIN3P_AIN4M),
+	AD719x_TEMP_CHANNEL(2, AD7192_CH_TEMP),
+	AD719x_DIFF_CHANNEL(3, 2, 2, AD7192_CH_AIN2P_AIN2M),
+	AD719x_CHANNEL(4, 1, AD7192_CH_AIN1),
+	AD719x_CHANNEL(5, 2, AD7192_CH_AIN2),
+	AD719x_CHANNEL(6, 3, AD7192_CH_AIN3),
+	AD719x_CHANNEL(7, 4, AD7192_CH_AIN4),
+	IIO_CHAN_SOFT_TIMESTAMP(8),
+};
+
+static const struct iio_chan_spec ad7193_channels[] = {
+	AD719x_DIFF_CHANNEL(0, 1, 2, AD7193_CH_AIN1P_AIN2M),
+	AD719x_DIFF_CHANNEL(1, 3, 4, AD7193_CH_AIN3P_AIN4M),
+	AD719x_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M),
+	AD719x_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M),
+	AD719x_TEMP_CHANNEL(4, AD7193_CH_TEMP),
+	AD719x_DIFF_CHANNEL(5, 2, 2, AD7193_CH_AIN2P_AIN2M),
+	AD719x_CHANNEL(6, 1, AD7193_CH_AIN1),
+	AD719x_CHANNEL(7, 2, AD7193_CH_AIN2),
+	AD719x_CHANNEL(8, 3, AD7193_CH_AIN3),
+	AD719x_CHANNEL(9, 4, AD7193_CH_AIN4),
+	AD719x_CHANNEL(10, 5, AD7193_CH_AIN5),
+	AD719x_CHANNEL(11, 6, AD7193_CH_AIN6),
+	AD719x_CHANNEL(12, 7, AD7193_CH_AIN7),
+	AD719x_CHANNEL(13, 8, AD7193_CH_AIN8),
+	IIO_CHAN_SOFT_TIMESTAMP(14),
+};
+
+static const struct ad7192_chip_info ad7192_chip_info_tbl[] = {
+	[ID_AD7190] = {
+		.chip_id = CHIPID_AD7190,
+		.name = "ad7190",
+	},
+	[ID_AD7192] = {
+		.chip_id = CHIPID_AD7192,
+		.name = "ad7192",
+	},
+	[ID_AD7193] = {
+		.chip_id = CHIPID_AD7193,
+		.name = "ad7193",
+	},
+	[ID_AD7195] = {
+		.chip_id = CHIPID_AD7195,
+		.name = "ad7195",
+	},
+};
+
+static int ad7192_channels_config(struct iio_dev *indio_dev)
+{
+	struct ad7192_state *st = iio_priv(indio_dev);
+
+	switch (st->chip_info->chip_id) {
+	case CHIPID_AD7193:
+		indio_dev->channels = ad7193_channels;
+		indio_dev->num_channels = ARRAY_SIZE(ad7193_channels);
+		break;
+	default:
+		indio_dev->channels = ad7192_channels;
+		indio_dev->num_channels = ARRAY_SIZE(ad7192_channels);
+		break;
+	}
+
+	return 0;
+}
+
+static void ad7192_reg_disable(void *reg)
+{
+	regulator_disable(reg);
+}
+
+static void ad7192_clk_disable(void *clk)
+{
+	clk_disable_unprepare(clk);
+}
+
+static int ad7192_probe(struct spi_device *spi)
+{
+	struct ad7192_state *st;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	if (!spi->irq) {
+		dev_err(&spi->dev, "no IRQ?\n");
+		return -ENODEV;
+	}
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	mutex_init(&st->lock);
+
+	st->avdd = devm_regulator_get(&spi->dev, "avdd");
+	if (IS_ERR(st->avdd))
+		return PTR_ERR(st->avdd);
+
+	ret = regulator_enable(st->avdd);
+	if (ret) {
+		dev_err(&spi->dev, "Failed to enable specified AVdd supply\n");
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(&spi->dev, ad7192_reg_disable, st->avdd);
+	if (ret)
+		return ret;
+
+	ret = devm_regulator_get_enable(&spi->dev, "dvdd");
+	if (ret)
+		return dev_err_probe(&spi->dev, ret, "Failed to enable specified DVdd supply\n");
+
+	st->vref = devm_regulator_get_optional(&spi->dev, "vref");
+	if (IS_ERR(st->vref)) {
+		if (PTR_ERR(st->vref) != -ENODEV)
+			return PTR_ERR(st->vref);
+
+		ret = regulator_get_voltage(st->avdd);
+		if (ret < 0)
+			return dev_err_probe(&spi->dev, ret,
+					     "Device tree error, AVdd voltage undefined\n");
+	} else {
+		ret = regulator_enable(st->vref);
+		if (ret) {
+			dev_err(&spi->dev, "Failed to enable specified Vref supply\n");
+			return ret;
+		}
+
+		ret = devm_add_action_or_reset(&spi->dev, ad7192_reg_disable, st->vref);
+		if (ret)
+			return ret;
+
+		ret = regulator_get_voltage(st->vref);
+		if (ret < 0)
+			return dev_err_probe(&spi->dev, ret,
+					     "Device tree error, Vref voltage undefined\n");
+	}
+	st->int_vref_mv = ret / 1000;
+
+	st->chip_info = of_device_get_match_data(&spi->dev);
+	indio_dev->name = st->chip_info->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = ad7192_channels_config(indio_dev);
+	if (ret < 0)
+		return ret;
+
+	if (st->chip_info->chip_id == CHIPID_AD7195)
+		indio_dev->info = &ad7195_info;
+	else
+		indio_dev->info = &ad7192_info;
+
+	ad_sd_init(&st->sd, indio_dev, spi, &ad7192_sigma_delta_info);
+
+	ret = devm_ad_sd_setup_buffer_and_trigger(&spi->dev, indio_dev);
+	if (ret)
+		return ret;
+
+	st->fclk = AD7192_INT_FREQ_MHZ;
+
+	st->mclk = devm_clk_get_optional(&spi->dev, "mclk");
+	if (IS_ERR(st->mclk))
+		return PTR_ERR(st->mclk);
+
+	st->clock_sel = ad7192_of_clock_select(st);
+
+	if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 ||
+	    st->clock_sel == AD7192_CLK_EXT_MCLK2) {
+		ret = clk_prepare_enable(st->mclk);
+		if (ret < 0)
+			return ret;
+
+		ret = devm_add_action_or_reset(&spi->dev, ad7192_clk_disable,
+					       st->mclk);
+		if (ret)
+			return ret;
+
+		st->fclk = clk_get_rate(st->mclk);
+		if (!ad7192_valid_external_frequency(st->fclk)) {
+			dev_err(&spi->dev,
+				"External clock frequency out of bounds\n");
+			return -EINVAL;
+		}
+	}
+
+	ret = ad7192_setup(indio_dev, spi->dev.of_node);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct of_device_id ad7192_of_match[] = {
+	{ .compatible = "adi,ad7190", .data = &ad7192_chip_info_tbl[ID_AD7190] },
+	{ .compatible = "adi,ad7192", .data = &ad7192_chip_info_tbl[ID_AD7192] },
+	{ .compatible = "adi,ad7193", .data = &ad7192_chip_info_tbl[ID_AD7193] },
+	{ .compatible = "adi,ad7195", .data = &ad7192_chip_info_tbl[ID_AD7195] },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ad7192_of_match);
+
+static struct spi_driver ad7192_driver = {
+	.driver = {
+		.name	= "ad7192",
+		.of_match_table = ad7192_of_match,
+	},
+	.probe		= ad7192_probe,
+};
+module_spi_driver(ad7192_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7190, AD7192, AD7193, AD7195 ADC");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_AD_SIGMA_DELTA);