Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1138 insertions, 0 deletions

diff --git a/drivers/iio/dac/ad3552r.c b/drivers/iio/dac/ad3552r.c
new file mode 100644
index 000000000..a492e8f2f
--- /dev/null
+++ b/drivers/iio/dac/ad3552r.c
@@ -0,0 +1,1138 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Analog Devices AD3552R
+ * Digital to Analog converter driver
+ *
+ * Copyright 2021 Analog Devices Inc.
+ */
+#include <asm/unaligned.h>
+#include <linux/device.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+/* Register addresses */
+/* Primary address space */
+#define AD3552R_REG_ADDR_INTERFACE_CONFIG_A		0x00
+#define   AD3552R_MASK_SOFTWARE_RESET			(BIT(7) | BIT(0))
+#define   AD3552R_MASK_ADDR_ASCENSION			BIT(5)
+#define   AD3552R_MASK_SDO_ACTIVE			BIT(4)
+#define AD3552R_REG_ADDR_INTERFACE_CONFIG_B		0x01
+#define   AD3552R_MASK_SINGLE_INST			BIT(7)
+#define   AD3552R_MASK_SHORT_INSTRUCTION		BIT(3)
+#define AD3552R_REG_ADDR_DEVICE_CONFIG			0x02
+#define   AD3552R_MASK_DEVICE_STATUS(n)			BIT(4 + (n))
+#define   AD3552R_MASK_CUSTOM_MODES			GENMASK(3, 2)
+#define   AD3552R_MASK_OPERATING_MODES			GENMASK(1, 0)
+#define AD3552R_REG_ADDR_CHIP_TYPE			0x03
+#define   AD3552R_MASK_CLASS				GENMASK(7, 0)
+#define AD3552R_REG_ADDR_PRODUCT_ID_L			0x04
+#define AD3552R_REG_ADDR_PRODUCT_ID_H			0x05
+#define AD3552R_REG_ADDR_CHIP_GRADE			0x06
+#define   AD3552R_MASK_GRADE				GENMASK(7, 4)
+#define   AD3552R_MASK_DEVICE_REVISION			GENMASK(3, 0)
+#define AD3552R_REG_ADDR_SCRATCH_PAD			0x0A
+#define AD3552R_REG_ADDR_SPI_REVISION			0x0B
+#define AD3552R_REG_ADDR_VENDOR_L			0x0C
+#define AD3552R_REG_ADDR_VENDOR_H			0x0D
+#define AD3552R_REG_ADDR_STREAM_MODE			0x0E
+#define   AD3552R_MASK_LENGTH				GENMASK(7, 0)
+#define AD3552R_REG_ADDR_TRANSFER_REGISTER		0x0F
+#define   AD3552R_MASK_MULTI_IO_MODE			GENMASK(7, 6)
+#define   AD3552R_MASK_STREAM_LENGTH_KEEP_VALUE		BIT(2)
+#define AD3552R_REG_ADDR_INTERFACE_CONFIG_C		0x10
+#define   AD3552R_MASK_CRC_ENABLE			(GENMASK(7, 6) |\
+							 GENMASK(1, 0))
+#define   AD3552R_MASK_STRICT_REGISTER_ACCESS		BIT(5)
+#define AD3552R_REG_ADDR_INTERFACE_STATUS_A		0x11
+#define   AD3552R_MASK_INTERFACE_NOT_READY		BIT(7)
+#define   AD3552R_MASK_CLOCK_COUNTING_ERROR		BIT(5)
+#define   AD3552R_MASK_INVALID_OR_NO_CRC		BIT(3)
+#define   AD3552R_MASK_WRITE_TO_READ_ONLY_REGISTER	BIT(2)
+#define   AD3552R_MASK_PARTIAL_REGISTER_ACCESS		BIT(1)
+#define   AD3552R_MASK_REGISTER_ADDRESS_INVALID		BIT(0)
+#define AD3552R_REG_ADDR_INTERFACE_CONFIG_D		0x14
+#define   AD3552R_MASK_ALERT_ENABLE_PULLUP		BIT(6)
+#define   AD3552R_MASK_MEM_CRC_EN			BIT(4)
+#define   AD3552R_MASK_SDO_DRIVE_STRENGTH		GENMASK(3, 2)
+#define   AD3552R_MASK_DUAL_SPI_SYNCHROUNOUS_EN		BIT(1)
+#define   AD3552R_MASK_SPI_CONFIG_DDR			BIT(0)
+#define AD3552R_REG_ADDR_SH_REFERENCE_CONFIG		0x15
+#define   AD3552R_MASK_IDUMP_FAST_MODE			BIT(6)
+#define   AD3552R_MASK_SAMPLE_HOLD_DIFFERENTIAL_USER_EN	BIT(5)
+#define   AD3552R_MASK_SAMPLE_HOLD_USER_TRIM		GENMASK(4, 3)
+#define   AD3552R_MASK_SAMPLE_HOLD_USER_ENABLE		BIT(2)
+#define   AD3552R_MASK_REFERENCE_VOLTAGE_SEL		GENMASK(1, 0)
+#define AD3552R_REG_ADDR_ERR_ALARM_MASK			0x16
+#define   AD3552R_MASK_REF_RANGE_ALARM			BIT(6)
+#define   AD3552R_MASK_CLOCK_COUNT_ERR_ALARM		BIT(5)
+#define   AD3552R_MASK_MEM_CRC_ERR_ALARM		BIT(4)
+#define   AD3552R_MASK_SPI_CRC_ERR_ALARM		BIT(3)
+#define   AD3552R_MASK_WRITE_TO_READ_ONLY_ALARM		BIT(2)
+#define   AD3552R_MASK_PARTIAL_REGISTER_ACCESS_ALARM	BIT(1)
+#define   AD3552R_MASK_REGISTER_ADDRESS_INVALID_ALARM	BIT(0)
+#define AD3552R_REG_ADDR_ERR_STATUS			0x17
+#define   AD3552R_MASK_REF_RANGE_ERR_STATUS			BIT(6)
+#define   AD3552R_MASK_DUAL_SPI_STREAM_EXCEEDS_DAC_ERR_STATUS	BIT(5)
+#define   AD3552R_MASK_MEM_CRC_ERR_STATUS			BIT(4)
+#define   AD3552R_MASK_RESET_STATUS				BIT(0)
+#define AD3552R_REG_ADDR_POWERDOWN_CONFIG		0x18
+#define   AD3552R_MASK_CH_DAC_POWERDOWN(ch)		BIT(4 + (ch))
+#define   AD3552R_MASK_CH_AMPLIFIER_POWERDOWN(ch)	BIT(ch)
+#define AD3552R_REG_ADDR_CH0_CH1_OUTPUT_RANGE		0x19
+#define   AD3552R_MASK_CH_OUTPUT_RANGE_SEL(ch)		((ch) ? GENMASK(7, 4) :\
+							 GENMASK(3, 0))
+#define AD3552R_REG_ADDR_CH_OFFSET(ch)			(0x1B + (ch) * 2)
+#define   AD3552R_MASK_CH_OFFSET_BITS_0_7		GENMASK(7, 0)
+#define AD3552R_REG_ADDR_CH_GAIN(ch)			(0x1C + (ch) * 2)
+#define   AD3552R_MASK_CH_RANGE_OVERRIDE		BIT(7)
+#define   AD3552R_MASK_CH_GAIN_SCALING_N		GENMASK(6, 5)
+#define   AD3552R_MASK_CH_GAIN_SCALING_P		GENMASK(4, 3)
+#define   AD3552R_MASK_CH_OFFSET_POLARITY		BIT(2)
+#define   AD3552R_MASK_CH_OFFSET_BIT_8			BIT(0)
+/*
+ * Secondary region
+ * For multibyte registers specify the highest address because the access is
+ * done in descending order
+ */
+#define AD3552R_SECONDARY_REGION_START			0x28
+#define AD3552R_REG_ADDR_HW_LDAC_16B			0x28
+#define AD3552R_REG_ADDR_CH_DAC_16B(ch)			(0x2C - (1 - ch) * 2)
+#define AD3552R_REG_ADDR_DAC_PAGE_MASK_16B		0x2E
+#define AD3552R_REG_ADDR_CH_SELECT_16B			0x2F
+#define AD3552R_REG_ADDR_INPUT_PAGE_MASK_16B		0x31
+#define AD3552R_REG_ADDR_SW_LDAC_16B			0x32
+#define AD3552R_REG_ADDR_CH_INPUT_16B(ch)		(0x36 - (1 - ch) * 2)
+/* 3 bytes registers */
+#define AD3552R_REG_START_24B				0x37
+#define AD3552R_REG_ADDR_HW_LDAC_24B			0x37
+#define AD3552R_REG_ADDR_CH_DAC_24B(ch)			(0x3D - (1 - ch) * 3)
+#define AD3552R_REG_ADDR_DAC_PAGE_MASK_24B		0x40
+#define AD3552R_REG_ADDR_CH_SELECT_24B			0x41
+#define AD3552R_REG_ADDR_INPUT_PAGE_MASK_24B		0x44
+#define AD3552R_REG_ADDR_SW_LDAC_24B			0x45
+#define AD3552R_REG_ADDR_CH_INPUT_24B(ch)		(0x4B - (1 - ch) * 3)
+
+/* Useful defines */
+#define AD3552R_NUM_CH					2
+#define AD3552R_MASK_CH(ch)				BIT(ch)
+#define AD3552R_MASK_ALL_CH				GENMASK(1, 0)
+#define AD3552R_MAX_REG_SIZE				3
+#define AD3552R_READ_BIT				BIT(7)
+#define AD3552R_ADDR_MASK				GENMASK(6, 0)
+#define AD3552R_MASK_DAC_12B				0xFFF0
+#define AD3552R_DEFAULT_CONFIG_B_VALUE			0x8
+#define AD3552R_SCRATCH_PAD_TEST_VAL1			0x34
+#define AD3552R_SCRATCH_PAD_TEST_VAL2			0xB2
+#define AD3552R_GAIN_SCALE				1000
+#define AD3552R_LDAC_PULSE_US				100
+
+enum ad3552r_ch_vref_select {
+	/* Internal source with Vref I/O floating */
+	AD3552R_INTERNAL_VREF_PIN_FLOATING,
+	/* Internal source with Vref I/O at 2.5V */
+	AD3552R_INTERNAL_VREF_PIN_2P5V,
+	/* External source with Vref I/O as input */
+	AD3552R_EXTERNAL_VREF_PIN_INPUT
+};
+
+enum ad3542r_id {
+	AD3542R_ID = 0x4009,
+	AD3552R_ID = 0x4008,
+};
+
+enum ad3552r_ch_output_range {
+	/* Range from 0 V to 2.5 V. Requires Rfb1x connection */
+	AD3552R_CH_OUTPUT_RANGE_0__2P5V,
+	/* Range from 0 V to 5 V. Requires Rfb1x connection  */
+	AD3552R_CH_OUTPUT_RANGE_0__5V,
+	/* Range from 0 V to 10 V. Requires Rfb2x connection  */
+	AD3552R_CH_OUTPUT_RANGE_0__10V,
+	/* Range from -5 V to 5 V. Requires Rfb2x connection  */
+	AD3552R_CH_OUTPUT_RANGE_NEG_5__5V,
+	/* Range from -10 V to 10 V. Requires Rfb4x connection  */
+	AD3552R_CH_OUTPUT_RANGE_NEG_10__10V,
+};
+
+static const s32 ad3552r_ch_ranges[][2] = {
+	[AD3552R_CH_OUTPUT_RANGE_0__2P5V]	= {0, 2500},
+	[AD3552R_CH_OUTPUT_RANGE_0__5V]		= {0, 5000},
+	[AD3552R_CH_OUTPUT_RANGE_0__10V]	= {0, 10000},
+	[AD3552R_CH_OUTPUT_RANGE_NEG_5__5V]	= {-5000, 5000},
+	[AD3552R_CH_OUTPUT_RANGE_NEG_10__10V]	= {-10000, 10000}
+};
+
+enum ad3542r_ch_output_range {
+	/* Range from 0 V to 2.5 V. Requires Rfb1x connection */
+	AD3542R_CH_OUTPUT_RANGE_0__2P5V,
+	/* Range from 0 V to 3 V. Requires Rfb1x connection  */
+	AD3542R_CH_OUTPUT_RANGE_0__3V,
+	/* Range from 0 V to 5 V. Requires Rfb1x connection  */
+	AD3542R_CH_OUTPUT_RANGE_0__5V,
+	/* Range from 0 V to 10 V. Requires Rfb2x connection  */
+	AD3542R_CH_OUTPUT_RANGE_0__10V,
+	/* Range from -2.5 V to 7.5 V. Requires Rfb2x connection  */
+	AD3542R_CH_OUTPUT_RANGE_NEG_2P5__7P5V,
+	/* Range from -5 V to 5 V. Requires Rfb2x connection  */
+	AD3542R_CH_OUTPUT_RANGE_NEG_5__5V,
+};
+
+static const s32 ad3542r_ch_ranges[][2] = {
+	[AD3542R_CH_OUTPUT_RANGE_0__2P5V]	= {0, 2500},
+	[AD3542R_CH_OUTPUT_RANGE_0__3V]		= {0, 3000},
+	[AD3542R_CH_OUTPUT_RANGE_0__5V]		= {0, 5000},
+	[AD3542R_CH_OUTPUT_RANGE_0__10V]	= {0, 10000},
+	[AD3542R_CH_OUTPUT_RANGE_NEG_2P5__7P5V]	= {-2500, 7500},
+	[AD3542R_CH_OUTPUT_RANGE_NEG_5__5V]	= {-5000, 5000}
+};
+
+enum ad3552r_ch_gain_scaling {
+	/* Gain scaling of 1 */
+	AD3552R_CH_GAIN_SCALING_1,
+	/* Gain scaling of 0.5 */
+	AD3552R_CH_GAIN_SCALING_0_5,
+	/* Gain scaling of 0.25 */
+	AD3552R_CH_GAIN_SCALING_0_25,
+	/* Gain scaling of 0.125 */
+	AD3552R_CH_GAIN_SCALING_0_125,
+};
+
+/* Gain * AD3552R_GAIN_SCALE */
+static const s32 gains_scaling_table[] = {
+	[AD3552R_CH_GAIN_SCALING_1]		= 1000,
+	[AD3552R_CH_GAIN_SCALING_0_5]		= 500,
+	[AD3552R_CH_GAIN_SCALING_0_25]		= 250,
+	[AD3552R_CH_GAIN_SCALING_0_125]		= 125
+};
+
+enum ad3552r_dev_attributes {
+	/* - Direct register values */
+	/* From 0-3 */
+	AD3552R_SDO_DRIVE_STRENGTH,
+	/*
+	 * 0 -> Internal Vref, vref_io pin floating (default)
+	 * 1 -> Internal Vref, vref_io driven by internal vref
+	 * 2 or 3 -> External Vref
+	 */
+	AD3552R_VREF_SELECT,
+	/* Read registers in ascending order if set. Else descending */
+	AD3552R_ADDR_ASCENSION,
+};
+
+enum ad3552r_ch_attributes {
+	/* DAC powerdown */
+	AD3552R_CH_DAC_POWERDOWN,
+	/* DAC amplifier powerdown */
+	AD3552R_CH_AMPLIFIER_POWERDOWN,
+	/* Select the output range. Select from enum ad3552r_ch_output_range */
+	AD3552R_CH_OUTPUT_RANGE_SEL,
+	/*
+	 * Over-rider the range selector in order to manually set the output
+	 * voltage range
+	 */
+	AD3552R_CH_RANGE_OVERRIDE,
+	/* Manually set the offset voltage */
+	AD3552R_CH_GAIN_OFFSET,
+	/* Sets the polarity of the offset. */
+	AD3552R_CH_GAIN_OFFSET_POLARITY,
+	/* PDAC gain scaling */
+	AD3552R_CH_GAIN_SCALING_P,
+	/* NDAC gain scaling */
+	AD3552R_CH_GAIN_SCALING_N,
+	/* Rfb value */
+	AD3552R_CH_RFB,
+	/* Channel select. When set allow Input -> DAC and Mask -> DAC */
+	AD3552R_CH_SELECT,
+};
+
+struct ad3552r_ch_data {
+	s32	scale_int;
+	s32	scale_dec;
+	s32	offset_int;
+	s32	offset_dec;
+	s16	gain_offset;
+	u16	rfb;
+	u8	n;
+	u8	p;
+	u8	range;
+	bool	range_override;
+};
+
+struct ad3552r_desc {
+	/* Used to look the spi bus for atomic operations where needed */
+	struct mutex		lock;
+	struct gpio_desc	*gpio_reset;
+	struct gpio_desc	*gpio_ldac;
+	struct spi_device	*spi;
+	struct ad3552r_ch_data	ch_data[AD3552R_NUM_CH];
+	struct iio_chan_spec	channels[AD3552R_NUM_CH + 1];
+	unsigned long		enabled_ch;
+	unsigned int		num_ch;
+	enum ad3542r_id		chip_id;
+};
+
+static const u16 addr_mask_map[][2] = {
+	[AD3552R_ADDR_ASCENSION] = {
+			AD3552R_REG_ADDR_INTERFACE_CONFIG_A,
+			AD3552R_MASK_ADDR_ASCENSION
+	},
+	[AD3552R_SDO_DRIVE_STRENGTH] = {
+			AD3552R_REG_ADDR_INTERFACE_CONFIG_D,
+			AD3552R_MASK_SDO_DRIVE_STRENGTH
+	},
+	[AD3552R_VREF_SELECT] = {
+			AD3552R_REG_ADDR_SH_REFERENCE_CONFIG,
+			AD3552R_MASK_REFERENCE_VOLTAGE_SEL
+	},
+};
+
+/* 0 -> reg addr, 1->ch0 mask, 2->ch1 mask */
+static const u16 addr_mask_map_ch[][3] = {
+	[AD3552R_CH_DAC_POWERDOWN] = {
+			AD3552R_REG_ADDR_POWERDOWN_CONFIG,
+			AD3552R_MASK_CH_DAC_POWERDOWN(0),
+			AD3552R_MASK_CH_DAC_POWERDOWN(1)
+	},
+	[AD3552R_CH_AMPLIFIER_POWERDOWN] = {
+			AD3552R_REG_ADDR_POWERDOWN_CONFIG,
+			AD3552R_MASK_CH_AMPLIFIER_POWERDOWN(0),
+			AD3552R_MASK_CH_AMPLIFIER_POWERDOWN(1)
+	},
+	[AD3552R_CH_OUTPUT_RANGE_SEL] = {
+			AD3552R_REG_ADDR_CH0_CH1_OUTPUT_RANGE,
+			AD3552R_MASK_CH_OUTPUT_RANGE_SEL(0),
+			AD3552R_MASK_CH_OUTPUT_RANGE_SEL(1)
+	},
+	[AD3552R_CH_SELECT] = {
+			AD3552R_REG_ADDR_CH_SELECT_16B,
+			AD3552R_MASK_CH(0),
+			AD3552R_MASK_CH(1)
+	}
+};
+
+static u8 _ad3552r_reg_len(u8 addr)
+{
+	switch (addr) {
+	case AD3552R_REG_ADDR_HW_LDAC_16B:
+	case AD3552R_REG_ADDR_CH_SELECT_16B:
+	case AD3552R_REG_ADDR_SW_LDAC_16B:
+	case AD3552R_REG_ADDR_HW_LDAC_24B:
+	case AD3552R_REG_ADDR_CH_SELECT_24B:
+	case AD3552R_REG_ADDR_SW_LDAC_24B:
+		return 1;
+	default:
+		break;
+	}
+
+	if (addr > AD3552R_REG_ADDR_HW_LDAC_24B)
+		return 3;
+	if (addr > AD3552R_REG_ADDR_HW_LDAC_16B)
+		return 2;
+
+	return 1;
+}
+
+/* SPI transfer to device */
+static int ad3552r_transfer(struct ad3552r_desc *dac, u8 addr, u32 len,
+			    u8 *data, bool is_read)
+{
+	/* Maximum transfer: Addr (1B) + 2 * (Data Reg (3B)) + SW LDAC(1B) */
+	u8 buf[8];
+
+	buf[0] = addr & AD3552R_ADDR_MASK;
+	buf[0] |= is_read ? AD3552R_READ_BIT : 0;
+	if (is_read)
+		return spi_write_then_read(dac->spi, buf, 1, data, len);
+
+	memcpy(buf + 1, data, len);
+	return spi_write_then_read(dac->spi, buf, len + 1, NULL, 0);
+}
+
+static int ad3552r_write_reg(struct ad3552r_desc *dac, u8 addr, u16 val)
+{
+	u8 reg_len;
+	u8 buf[AD3552R_MAX_REG_SIZE] = { 0 };
+
+	reg_len = _ad3552r_reg_len(addr);
+	if (reg_len == 2)
+		/* Only DAC register are 2 bytes wide */
+		val &= AD3552R_MASK_DAC_12B;
+	if (reg_len == 1)
+		buf[0] = val & 0xFF;
+	else
+		/* reg_len can be 2 or 3, but 3rd bytes needs to be set to 0 */
+		put_unaligned_be16(val, buf);
+
+	return ad3552r_transfer(dac, addr, reg_len, buf, false);
+}
+
+static int ad3552r_read_reg(struct ad3552r_desc *dac, u8 addr, u16 *val)
+{
+	int err;
+	u8  reg_len, buf[AD3552R_MAX_REG_SIZE] = { 0 };
+
+	reg_len = _ad3552r_reg_len(addr);
+	err = ad3552r_transfer(dac, addr, reg_len, buf, true);
+	if (err)
+		return err;
+
+	if (reg_len == 1)
+		*val = buf[0];
+	else
+		/* reg_len can be 2 or 3, but only first 2 bytes are relevant */
+		*val = get_unaligned_be16(buf);
+
+	return 0;
+}
+
+static u16 ad3552r_field_prep(u16 val, u16 mask)
+{
+	return (val << __ffs(mask)) & mask;
+}
+
+/* Update field of a register, shift val if needed */
+static int ad3552r_update_reg_field(struct ad3552r_desc *dac, u8 addr, u16 mask,
+				    u16 val)
+{
+	int ret;
+	u16 reg;
+
+	ret = ad3552r_read_reg(dac, addr, &reg);
+	if (ret < 0)
+		return ret;
+
+	reg &= ~mask;
+	reg |= ad3552r_field_prep(val, mask);
+
+	return ad3552r_write_reg(dac, addr, reg);
+}
+
+static int ad3552r_set_ch_value(struct ad3552r_desc *dac,
+				enum ad3552r_ch_attributes attr,
+				u8 ch,
+				u16 val)
+{
+	/* Update register related to attributes in chip */
+	return ad3552r_update_reg_field(dac, addr_mask_map_ch[attr][0],
+				       addr_mask_map_ch[attr][ch + 1], val);
+}
+
+#define AD3552R_CH_DAC(_idx) ((struct iio_chan_spec) {		\
+	.type = IIO_VOLTAGE,					\
+	.output = true,						\
+	.indexed = true,					\
+	.channel = _idx,					\
+	.scan_index = _idx,					\
+	.scan_type = {						\
+		.sign = 'u',					\
+		.realbits = 16,					\
+		.storagebits = 16,				\
+		.endianness = IIO_BE,				\
+	},							\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		\
+				BIT(IIO_CHAN_INFO_SCALE) |	\
+				BIT(IIO_CHAN_INFO_ENABLE) |	\
+				BIT(IIO_CHAN_INFO_OFFSET),	\
+})
+
+static int ad3552r_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val,
+			    int *val2,
+			    long mask)
+{
+	struct ad3552r_desc *dac = iio_priv(indio_dev);
+	u16 tmp_val;
+	int err;
+	u8 ch = chan->channel;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&dac->lock);
+		err = ad3552r_read_reg(dac, AD3552R_REG_ADDR_CH_DAC_24B(ch),
+				       &tmp_val);
+		mutex_unlock(&dac->lock);
+		if (err < 0)
+			return err;
+		*val = tmp_val;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_ENABLE:
+		mutex_lock(&dac->lock);
+		err = ad3552r_read_reg(dac, AD3552R_REG_ADDR_POWERDOWN_CONFIG,
+				       &tmp_val);
+		mutex_unlock(&dac->lock);
+		if (err < 0)
+			return err;
+		*val = !((tmp_val & AD3552R_MASK_CH_DAC_POWERDOWN(ch)) >>
+			  __ffs(AD3552R_MASK_CH_DAC_POWERDOWN(ch)));
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = dac->ch_data[ch].scale_int;
+		*val2 = dac->ch_data[ch].scale_dec;
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_OFFSET:
+		*val = dac->ch_data[ch].offset_int;
+		*val2 = dac->ch_data[ch].offset_dec;
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ad3552r_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val,
+			     int val2,
+			     long mask)
+{
+	struct ad3552r_desc *dac = iio_priv(indio_dev);
+	int err;
+
+	mutex_lock(&dac->lock);
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		err = ad3552r_write_reg(dac,
+					AD3552R_REG_ADDR_CH_DAC_24B(chan->channel),
+					val);
+		break;
+	case IIO_CHAN_INFO_ENABLE:
+		err = ad3552r_set_ch_value(dac, AD3552R_CH_DAC_POWERDOWN,
+					   chan->channel, !val);
+		break;
+	default:
+		err = -EINVAL;
+		break;
+	}
+	mutex_unlock(&dac->lock);
+
+	return err;
+}
+
+static const struct iio_info ad3552r_iio_info = {
+	.read_raw = ad3552r_read_raw,
+	.write_raw = ad3552r_write_raw
+};
+
+static int32_t ad3552r_trigger_hw_ldac(struct gpio_desc *ldac)
+{
+	gpiod_set_value_cansleep(ldac, 0);
+	usleep_range(AD3552R_LDAC_PULSE_US, AD3552R_LDAC_PULSE_US + 10);
+	gpiod_set_value_cansleep(ldac, 1);
+
+	return 0;
+}
+
+static int ad3552r_write_all_channels(struct ad3552r_desc *dac, u8 *data)
+{
+	int err, len;
+	u8 addr, buff[AD3552R_NUM_CH * AD3552R_MAX_REG_SIZE + 1];
+
+	addr = AD3552R_REG_ADDR_CH_INPUT_24B(1);
+	/* CH1 */
+	memcpy(buff, data + 2, 2);
+	buff[2] = 0;
+	/* CH0 */
+	memcpy(buff + 3, data, 2);
+	buff[5] = 0;
+	len = 6;
+	if (!dac->gpio_ldac) {
+		/* Software LDAC */
+		buff[6] = AD3552R_MASK_ALL_CH;
+		++len;
+	}
+	err = ad3552r_transfer(dac, addr, len, buff, false);
+	if (err)
+		return err;
+
+	if (dac->gpio_ldac)
+		return ad3552r_trigger_hw_ldac(dac->gpio_ldac);
+
+	return 0;
+}
+
+static int ad3552r_write_codes(struct ad3552r_desc *dac, u32 mask, u8 *data)
+{
+	int err;
+	u8 addr, buff[AD3552R_MAX_REG_SIZE];
+
+	if (mask == AD3552R_MASK_ALL_CH) {
+		if (memcmp(data, data + 2, 2) != 0)
+			return ad3552r_write_all_channels(dac, data);
+
+		addr = AD3552R_REG_ADDR_INPUT_PAGE_MASK_24B;
+	} else {
+		addr = AD3552R_REG_ADDR_CH_INPUT_24B(__ffs(mask));
+	}
+
+	memcpy(buff, data, 2);
+	buff[2] = 0;
+	err = ad3552r_transfer(dac, addr, 3, data, false);
+	if (err)
+		return err;
+
+	if (dac->gpio_ldac)
+		return ad3552r_trigger_hw_ldac(dac->gpio_ldac);
+
+	return ad3552r_write_reg(dac, AD3552R_REG_ADDR_SW_LDAC_24B, mask);
+}
+
+static irqreturn_t ad3552r_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct iio_buffer *buf = indio_dev->buffer;
+	struct ad3552r_desc *dac = iio_priv(indio_dev);
+	/* Maximum size of a scan */
+	u8 buff[AD3552R_NUM_CH * AD3552R_MAX_REG_SIZE];
+	int err;
+
+	memset(buff, 0, sizeof(buff));
+	err = iio_pop_from_buffer(buf, buff);
+	if (err)
+		goto end;
+
+	mutex_lock(&dac->lock);
+	ad3552r_write_codes(dac, *indio_dev->active_scan_mask, buff);
+	mutex_unlock(&dac->lock);
+end:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int ad3552r_check_scratch_pad(struct ad3552r_desc *dac)
+{
+	const u16 val1 = AD3552R_SCRATCH_PAD_TEST_VAL1;
+	const u16 val2 = AD3552R_SCRATCH_PAD_TEST_VAL2;
+	u16 val;
+	int err;
+
+	err = ad3552r_write_reg(dac, AD3552R_REG_ADDR_SCRATCH_PAD, val1);
+	if (err < 0)
+		return err;
+
+	err = ad3552r_read_reg(dac, AD3552R_REG_ADDR_SCRATCH_PAD, &val);
+	if (err < 0)
+		return err;
+
+	if (val1 != val)
+		return -ENODEV;
+
+	err = ad3552r_write_reg(dac, AD3552R_REG_ADDR_SCRATCH_PAD, val2);
+	if (err < 0)
+		return err;
+
+	err = ad3552r_read_reg(dac, AD3552R_REG_ADDR_SCRATCH_PAD, &val);
+	if (err < 0)
+		return err;
+
+	if (val2 != val)
+		return -ENODEV;
+
+	return 0;
+}
+
+struct reg_addr_pool {
+	struct ad3552r_desc *dac;
+	u8		    addr;
+};
+
+static int ad3552r_read_reg_wrapper(struct reg_addr_pool *addr)
+{
+	int err;
+	u16 val;
+
+	err = ad3552r_read_reg(addr->dac, addr->addr, &val);
+	if (err)
+		return err;
+
+	return val;
+}
+
+static int ad3552r_reset(struct ad3552r_desc *dac)
+{
+	struct reg_addr_pool addr;
+	int ret;
+	int val;
+
+	dac->gpio_reset = devm_gpiod_get_optional(&dac->spi->dev, "reset",
+						  GPIOD_OUT_LOW);
+	if (IS_ERR(dac->gpio_reset))
+		return dev_err_probe(&dac->spi->dev, PTR_ERR(dac->gpio_reset),
+				     "Error while getting gpio reset");
+
+	if (dac->gpio_reset) {
+		/* Perform hardware reset */
+		usleep_range(10, 20);
+		gpiod_set_value_cansleep(dac->gpio_reset, 1);
+	} else {
+		/* Perform software reset if no GPIO provided */
+		ret = ad3552r_update_reg_field(dac,
+					       AD3552R_REG_ADDR_INTERFACE_CONFIG_A,
+					       AD3552R_MASK_SOFTWARE_RESET,
+					       AD3552R_MASK_SOFTWARE_RESET);
+		if (ret < 0)
+			return ret;
+
+	}
+
+	addr.dac = dac;
+	addr.addr = AD3552R_REG_ADDR_INTERFACE_CONFIG_B;
+	ret = readx_poll_timeout(ad3552r_read_reg_wrapper, &addr, val,
+				 val == AD3552R_DEFAULT_CONFIG_B_VALUE ||
+				 val < 0,
+				 5000, 50000);
+	if (val < 0)
+		ret = val;
+	if (ret) {
+		dev_err(&dac->spi->dev, "Error while resetting");
+		return ret;
+	}
+
+	ret = readx_poll_timeout(ad3552r_read_reg_wrapper, &addr, val,
+				 !(val & AD3552R_MASK_INTERFACE_NOT_READY) ||
+				 val < 0,
+				 5000, 50000);
+	if (val < 0)
+		ret = val;
+	if (ret) {
+		dev_err(&dac->spi->dev, "Error while resetting");
+		return ret;
+	}
+
+	return ad3552r_update_reg_field(dac,
+					addr_mask_map[AD3552R_ADDR_ASCENSION][0],
+					addr_mask_map[AD3552R_ADDR_ASCENSION][1],
+					val);
+}
+
+static void ad3552r_get_custom_range(struct ad3552r_desc *dac, s32 i, s32 *v_min,
+				     s32 *v_max)
+{
+	s64 vref, tmp, common, offset, gn, gp;
+	/*
+	 * From datasheet formula (In Volts):
+	 *	Vmin = 2.5 + [(GainN + Offset / 1024) * 2.5 * Rfb * 1.03]
+	 *	Vmax = 2.5 - [(GainP + Offset / 1024) * 2.5 * Rfb * 1.03]
+	 * Calculus are converted to milivolts
+	 */
+	vref = 2500;
+	/* 2.5 * 1.03 * 1000 (To mV) */
+	common = 2575 * dac->ch_data[i].rfb;
+	offset = dac->ch_data[i].gain_offset;
+
+	gn = gains_scaling_table[dac->ch_data[i].n];
+	tmp = (1024 * gn + AD3552R_GAIN_SCALE * offset) * common;
+	tmp = div_s64(tmp, 1024  * AD3552R_GAIN_SCALE);
+	*v_max = vref + tmp;
+
+	gp = gains_scaling_table[dac->ch_data[i].p];
+	tmp = (1024 * gp - AD3552R_GAIN_SCALE * offset) * common;
+	tmp = div_s64(tmp, 1024 * AD3552R_GAIN_SCALE);
+	*v_min = vref - tmp;
+}
+
+static void ad3552r_calc_gain_and_offset(struct ad3552r_desc *dac, s32 ch)
+{
+	s32 idx, v_max, v_min, span, rem;
+	s64 tmp;
+
+	if (dac->ch_data[ch].range_override) {
+		ad3552r_get_custom_range(dac, ch, &v_min, &v_max);
+	} else {
+		/* Normal range */
+		idx = dac->ch_data[ch].range;
+		if (dac->chip_id == AD3542R_ID) {
+			v_min = ad3542r_ch_ranges[idx][0];
+			v_max = ad3542r_ch_ranges[idx][1];
+		} else {
+			v_min = ad3552r_ch_ranges[idx][0];
+			v_max = ad3552r_ch_ranges[idx][1];
+		}
+	}
+
+	/*
+	 * From datasheet formula:
+	 *	Vout = Span * (D / 65536) + Vmin
+	 * Converted to scale and offset:
+	 *	Scale = Span / 65536
+	 *	Offset = 65536 * Vmin / Span
+	 *
+	 * Reminders are in micros in order to be printed as
+	 * IIO_VAL_INT_PLUS_MICRO
+	 */
+	span = v_max - v_min;
+	dac->ch_data[ch].scale_int = div_s64_rem(span, 65536, &rem);
+	/* Do operations in microvolts */
+	dac->ch_data[ch].scale_dec = DIV_ROUND_CLOSEST((s64)rem * 1000000,
+							65536);
+
+	dac->ch_data[ch].offset_int = div_s64_rem(v_min * 65536, span, &rem);
+	tmp = (s64)rem * 1000000;
+	dac->ch_data[ch].offset_dec = div_s64(tmp, span);
+}
+
+static int ad3552r_find_range(u16 id, s32 *vals)
+{
+	int i, len;
+	const s32 (*ranges)[2];
+
+	if (id == AD3542R_ID) {
+		len = ARRAY_SIZE(ad3542r_ch_ranges);
+		ranges = ad3542r_ch_ranges;
+	} else {
+		len = ARRAY_SIZE(ad3552r_ch_ranges);
+		ranges = ad3552r_ch_ranges;
+	}
+
+	for (i = 0; i < len; i++)
+		if (vals[0] == ranges[i][0] * 1000 &&
+		    vals[1] == ranges[i][1] * 1000)
+			return i;
+
+	return -EINVAL;
+}
+
+static int ad3552r_configure_custom_gain(struct ad3552r_desc *dac,
+					 struct fwnode_handle *child,
+					 u32 ch)
+{
+	struct device *dev = &dac->spi->dev;
+	struct fwnode_handle *gain_child;
+	u32 val;
+	int err;
+	u8 addr;
+	u16 reg = 0, offset;
+
+	gain_child = fwnode_get_named_child_node(child,
+						 "custom-output-range-config");
+	if (!gain_child) {
+		dev_err(dev,
+			"mandatory custom-output-range-config property missing\n");
+		return -EINVAL;
+	}
+
+	dac->ch_data[ch].range_override = 1;
+	reg |= ad3552r_field_prep(1, AD3552R_MASK_CH_RANGE_OVERRIDE);
+
+	err = fwnode_property_read_u32(gain_child, "adi,gain-scaling-p", &val);
+	if (err) {
+		dev_err(dev, "mandatory adi,gain-scaling-p property missing\n");
+		goto put_child;
+	}
+	reg |= ad3552r_field_prep(val, AD3552R_MASK_CH_GAIN_SCALING_P);
+	dac->ch_data[ch].p = val;
+
+	err = fwnode_property_read_u32(gain_child, "adi,gain-scaling-n", &val);
+	if (err) {
+		dev_err(dev, "mandatory adi,gain-scaling-n property missing\n");
+		goto put_child;
+	}
+	reg |= ad3552r_field_prep(val, AD3552R_MASK_CH_GAIN_SCALING_N);
+	dac->ch_data[ch].n = val;
+
+	err = fwnode_property_read_u32(gain_child, "adi,rfb-ohms", &val);
+	if (err) {
+		dev_err(dev, "mandatory adi,rfb-ohms property missing\n");
+		goto put_child;
+	}
+	dac->ch_data[ch].rfb = val;
+
+	err = fwnode_property_read_u32(gain_child, "adi,gain-offset", &val);
+	if (err) {
+		dev_err(dev, "mandatory adi,gain-offset property missing\n");
+		goto put_child;
+	}
+	dac->ch_data[ch].gain_offset = val;
+
+	offset = abs((s32)val);
+	reg |= ad3552r_field_prep((offset >> 8), AD3552R_MASK_CH_OFFSET_BIT_8);
+
+	reg |= ad3552r_field_prep((s32)val < 0, AD3552R_MASK_CH_OFFSET_POLARITY);
+	addr = AD3552R_REG_ADDR_CH_GAIN(ch);
+	err = ad3552r_write_reg(dac, addr,
+				offset & AD3552R_MASK_CH_OFFSET_BITS_0_7);
+	if (err) {
+		dev_err(dev, "Error writing register\n");
+		goto put_child;
+	}
+
+	err = ad3552r_write_reg(dac, addr, reg);
+	if (err) {
+		dev_err(dev, "Error writing register\n");
+		goto put_child;
+	}
+
+put_child:
+	fwnode_handle_put(gain_child);
+
+	return err;
+}
+
+static void ad3552r_reg_disable(void *reg)
+{
+	regulator_disable(reg);
+}
+
+static int ad3552r_configure_device(struct ad3552r_desc *dac)
+{
+	struct device *dev = &dac->spi->dev;
+	struct fwnode_handle *child;
+	struct regulator *vref;
+	int err, cnt = 0, voltage, delta = 100000;
+	u32 vals[2], val, ch;
+
+	dac->gpio_ldac = devm_gpiod_get_optional(dev, "ldac", GPIOD_OUT_HIGH);
+	if (IS_ERR(dac->gpio_ldac))
+		return dev_err_probe(dev, PTR_ERR(dac->gpio_ldac),
+				     "Error getting gpio ldac");
+
+	vref = devm_regulator_get_optional(dev, "vref");
+	if (IS_ERR(vref)) {
+		if (PTR_ERR(vref) != -ENODEV)
+			return dev_err_probe(dev, PTR_ERR(vref),
+					     "Error getting vref");
+
+		if (device_property_read_bool(dev, "adi,vref-out-en"))
+			val = AD3552R_INTERNAL_VREF_PIN_2P5V;
+		else
+			val = AD3552R_INTERNAL_VREF_PIN_FLOATING;
+	} else {
+		err = regulator_enable(vref);
+		if (err) {
+			dev_err(dev, "Failed to enable external vref supply\n");
+			return err;
+		}
+
+		err = devm_add_action_or_reset(dev, ad3552r_reg_disable, vref);
+		if (err) {
+			regulator_disable(vref);
+			return err;
+		}
+
+		voltage = regulator_get_voltage(vref);
+		if (voltage > 2500000 + delta || voltage < 2500000 - delta) {
+			dev_warn(dev, "vref-supply must be 2.5V");
+			return -EINVAL;
+		}
+		val = AD3552R_EXTERNAL_VREF_PIN_INPUT;
+	}
+
+	err = ad3552r_update_reg_field(dac,
+				       addr_mask_map[AD3552R_VREF_SELECT][0],
+				       addr_mask_map[AD3552R_VREF_SELECT][1],
+				       val);
+	if (err)
+		return err;
+
+	err = device_property_read_u32(dev, "adi,sdo-drive-strength", &val);
+	if (!err) {
+		if (val > 3) {
+			dev_err(dev, "adi,sdo-drive-strength must be less than 4\n");
+			return -EINVAL;
+		}
+
+		err = ad3552r_update_reg_field(dac,
+					       addr_mask_map[AD3552R_SDO_DRIVE_STRENGTH][0],
+					       addr_mask_map[AD3552R_SDO_DRIVE_STRENGTH][1],
+					       val);
+		if (err)
+			return err;
+	}
+
+	dac->num_ch = device_get_child_node_count(dev);
+	if (!dac->num_ch) {
+		dev_err(dev, "No channels defined\n");
+		return -ENODEV;
+	}
+
+	device_for_each_child_node(dev, child) {
+		err = fwnode_property_read_u32(child, "reg", &ch);
+		if (err) {
+			dev_err(dev, "mandatory reg property missing\n");
+			goto put_child;
+		}
+		if (ch >= AD3552R_NUM_CH) {
+			dev_err(dev, "reg must be less than %d\n",
+				AD3552R_NUM_CH);
+			err = -EINVAL;
+			goto put_child;
+		}
+
+		if (fwnode_property_present(child, "adi,output-range-microvolt")) {
+			err = fwnode_property_read_u32_array(child,
+							     "adi,output-range-microvolt",
+							     vals,
+							     2);
+			if (err) {
+				dev_err(dev,
+					"adi,output-range-microvolt property could not be parsed\n");
+				goto put_child;
+			}
+
+			err = ad3552r_find_range(dac->chip_id, vals);
+			if (err < 0) {
+				dev_err(dev,
+					"Invalid adi,output-range-microvolt value\n");
+				goto put_child;
+			}
+			val = err;
+			err = ad3552r_set_ch_value(dac,
+						   AD3552R_CH_OUTPUT_RANGE_SEL,
+						   ch, val);
+			if (err)
+				goto put_child;
+
+			dac->ch_data[ch].range = val;
+		} else if (dac->chip_id == AD3542R_ID) {
+			dev_err(dev,
+				"adi,output-range-microvolt is required for ad3542r\n");
+			err = -EINVAL;
+			goto put_child;
+		} else {
+			err = ad3552r_configure_custom_gain(dac, child, ch);
+			if (err)
+				goto put_child;
+		}
+
+		ad3552r_calc_gain_and_offset(dac, ch);
+		dac->enabled_ch |= BIT(ch);
+
+		err = ad3552r_set_ch_value(dac, AD3552R_CH_SELECT, ch, 1);
+		if (err < 0)
+			goto put_child;
+
+		dac->channels[cnt] = AD3552R_CH_DAC(ch);
+		++cnt;
+
+	}
+
+	/* Disable unused channels */
+	for_each_clear_bit(ch, &dac->enabled_ch, AD3552R_NUM_CH) {
+		err = ad3552r_set_ch_value(dac, AD3552R_CH_AMPLIFIER_POWERDOWN,
+					   ch, 1);
+		if (err)
+			return err;
+	}
+
+	dac->num_ch = cnt;
+
+	return 0;
+put_child:
+	fwnode_handle_put(child);
+
+	return err;
+}
+
+static int ad3552r_init(struct ad3552r_desc *dac)
+{
+	int err;
+	u16 val, id;
+
+	err = ad3552r_reset(dac);
+	if (err) {
+		dev_err(&dac->spi->dev, "Reset failed\n");
+		return err;
+	}
+
+	err = ad3552r_check_scratch_pad(dac);
+	if (err) {
+		dev_err(&dac->spi->dev, "Scratch pad test failed\n");
+		return err;
+	}
+
+	err = ad3552r_read_reg(dac, AD3552R_REG_ADDR_PRODUCT_ID_L, &val);
+	if (err) {
+		dev_err(&dac->spi->dev, "Fail read PRODUCT_ID_L\n");
+		return err;
+	}
+
+	id = val;
+	err = ad3552r_read_reg(dac, AD3552R_REG_ADDR_PRODUCT_ID_H, &val);
+	if (err) {
+		dev_err(&dac->spi->dev, "Fail read PRODUCT_ID_H\n");
+		return err;
+	}
+
+	id |= val << 8;
+	if (id != dac->chip_id) {
+		dev_err(&dac->spi->dev, "Product id not matching\n");
+		return -ENODEV;
+	}
+
+	return ad3552r_configure_device(dac);
+}
+
+static int ad3552r_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+	struct ad3552r_desc *dac;
+	struct iio_dev *indio_dev;
+	int err;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*dac));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	dac = iio_priv(indio_dev);
+	dac->spi = spi;
+	dac->chip_id = id->driver_data;
+
+	mutex_init(&dac->lock);
+
+	err = ad3552r_init(dac);
+	if (err)
+		return err;
+
+	/* Config triggered buffer device */
+	if (dac->chip_id == AD3552R_ID)
+		indio_dev->name = "ad3552r";
+	else
+		indio_dev->name = "ad3542r";
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->info = &ad3552r_iio_info;
+	indio_dev->num_channels = dac->num_ch;
+	indio_dev->channels = dac->channels;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	err = devm_iio_triggered_buffer_setup_ext(&indio_dev->dev, indio_dev, NULL,
+						  &ad3552r_trigger_handler,
+						  IIO_BUFFER_DIRECTION_OUT,
+						  NULL,
+						  NULL);
+	if (err)
+		return err;
+
+	return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct spi_device_id ad3552r_id[] = {
+	{ "ad3542r", AD3542R_ID },
+	{ "ad3552r", AD3552R_ID },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, ad3552r_id);
+
+static const struct of_device_id ad3552r_of_match[] = {
+	{ .compatible = "adi,ad3542r"},
+	{ .compatible = "adi,ad3552r"},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ad3552r_of_match);
+
+static struct spi_driver ad3552r_driver = {
+	.driver = {
+		.name = "ad3552r",
+		.of_match_table = ad3552r_of_match,
+	},
+	.probe = ad3552r_probe,
+	.id_table = ad3552r_id
+};
+module_spi_driver(ad3552r_driver);
+
+MODULE_AUTHOR("Mihail Chindris <mihail.chindris@analog.com>");
+MODULE_DESCRIPTION("Analog Device AD3552R DAC");
+MODULE_LICENSE("GPL v2");