Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 619 insertions, 0 deletions

diff --git a/drivers/leds/leds-lp50xx.c b/drivers/leds/leds-lp50xx.c
new file mode 100644
index 000000000..28d6b39fa
--- /dev/null
+++ b/drivers/leds/leds-lp50xx.c
@@ -0,0 +1,619 @@
+// SPDX-License-Identifier: GPL-2.0
+// TI LP50XX LED chip family driver
+// Copyright (C) 2018-20 Texas Instruments Incorporated - https://www.ti.com/
+
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <uapi/linux/uleds.h>
+
+#include <linux/led-class-multicolor.h>
+
+#include "leds.h"
+
+#define LP50XX_DEV_CFG0		0x00
+#define LP50XX_DEV_CFG1		0x01
+#define LP50XX_LED_CFG0		0x02
+
+/* LP5009 and LP5012 registers */
+#define LP5012_BNK_BRT		0x03
+#define LP5012_BNKA_CLR		0x04
+#define LP5012_BNKB_CLR		0x05
+#define LP5012_BNKC_CLR		0x06
+#define LP5012_LED0_BRT		0x07
+#define LP5012_OUT0_CLR		0x0b
+#define LP5012_RESET		0x17
+
+/* LP5018 and LP5024 registers */
+#define LP5024_BNK_BRT		0x03
+#define LP5024_BNKA_CLR		0x04
+#define LP5024_BNKB_CLR		0x05
+#define LP5024_BNKC_CLR		0x06
+#define LP5024_LED0_BRT		0x07
+#define LP5024_OUT0_CLR		0x0f
+#define LP5024_RESET		0x27
+
+/* LP5030 and LP5036 registers */
+#define LP5036_LED_CFG1		0x03
+#define LP5036_BNK_BRT		0x04
+#define LP5036_BNKA_CLR		0x05
+#define LP5036_BNKB_CLR		0x06
+#define LP5036_BNKC_CLR		0x07
+#define LP5036_LED0_BRT		0x08
+#define LP5036_OUT0_CLR		0x14
+#define LP5036_RESET		0x38
+
+#define LP50XX_SW_RESET		0xff
+#define LP50XX_CHIP_EN		BIT(6)
+
+/* There are 3 LED outputs per bank */
+#define LP50XX_LEDS_PER_MODULE	3
+
+#define LP5009_MAX_LED_MODULES	2
+#define LP5012_MAX_LED_MODULES	4
+#define LP5018_MAX_LED_MODULES	6
+#define LP5024_MAX_LED_MODULES	8
+#define LP5030_MAX_LED_MODULES	10
+#define LP5036_MAX_LED_MODULES	12
+
+static const struct reg_default lp5012_reg_defs[] = {
+	{LP50XX_DEV_CFG0, 0x0},
+	{LP50XX_DEV_CFG1, 0x3c},
+	{LP50XX_LED_CFG0, 0x0},
+	{LP5012_BNK_BRT, 0xff},
+	{LP5012_BNKA_CLR, 0x0f},
+	{LP5012_BNKB_CLR, 0x0f},
+	{LP5012_BNKC_CLR, 0x0f},
+	{LP5012_LED0_BRT, 0x0f},
+	/* LEDX_BRT registers are all 0xff for defaults */
+	{0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff},
+	{LP5012_OUT0_CLR, 0x0f},
+	/* OUTX_CLR registers are all 0x0 for defaults */
+	{0x0c, 0x00}, {0x0d, 0x00}, {0x0e, 0x00}, {0x0f, 0x00}, {0x10, 0x00},
+	{0x11, 0x00}, {0x12, 0x00}, {0x13, 0x00}, {0x14, 0x00},	{0x15, 0x00},
+	{0x16, 0x00},
+	{LP5012_RESET, 0x00}
+};
+
+static const struct reg_default lp5024_reg_defs[] = {
+	{LP50XX_DEV_CFG0, 0x0},
+	{LP50XX_DEV_CFG1, 0x3c},
+	{LP50XX_LED_CFG0, 0x0},
+	{LP5024_BNK_BRT, 0xff},
+	{LP5024_BNKA_CLR, 0x0f},
+	{LP5024_BNKB_CLR, 0x0f},
+	{LP5024_BNKC_CLR, 0x0f},
+	{LP5024_LED0_BRT, 0x0f},
+	/* LEDX_BRT registers are all 0xff for defaults */
+	{0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff}, {0x0b, 0xff}, {0x0c, 0xff},
+	{0x0d, 0xff}, {0x0e, 0xff},
+	{LP5024_OUT0_CLR, 0x0f},
+	/* OUTX_CLR registers are all 0x0 for defaults */
+	{0x10, 0x00}, {0x11, 0x00}, {0x12, 0x00}, {0x13, 0x00}, {0x14, 0x00},
+	{0x15, 0x00}, {0x16, 0x00}, {0x17, 0x00}, {0x18, 0x00}, {0x19, 0x00},
+	{0x1a, 0x00}, {0x1b, 0x00}, {0x1c, 0x00}, {0x1d, 0x00}, {0x1e, 0x00},
+	{0x1f, 0x00}, {0x20, 0x00}, {0x21, 0x00}, {0x22, 0x00}, {0x23, 0x00},
+	{0x24, 0x00}, {0x25, 0x00}, {0x26, 0x00},
+	{LP5024_RESET, 0x00}
+};
+
+static const struct reg_default lp5036_reg_defs[] = {
+	{LP50XX_DEV_CFG0, 0x0},
+	{LP50XX_DEV_CFG1, 0x3c},
+	{LP50XX_LED_CFG0, 0x0},
+	{LP5036_LED_CFG1, 0x0},
+	{LP5036_BNK_BRT, 0xff},
+	{LP5036_BNKA_CLR, 0x0f},
+	{LP5036_BNKB_CLR, 0x0f},
+	{LP5036_BNKC_CLR, 0x0f},
+	{LP5036_LED0_BRT, 0x0f},
+	/* LEDX_BRT registers are all 0xff for defaults */
+	{0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff}, {0x0b, 0xff}, {0x0c, 0xff},
+	{0x0d, 0xff}, {0x0e, 0xff}, {0x0f, 0xff}, {0x10, 0xff}, {0x11, 0xff},
+	{0x12, 0xff}, {0x13, 0xff},
+	{LP5036_OUT0_CLR, 0x0f},
+	/* OUTX_CLR registers are all 0x0 for defaults */
+	{0x15, 0x00}, {0x16, 0x00}, {0x17, 0x00}, {0x18, 0x00}, {0x19, 0x00},
+	{0x1a, 0x00}, {0x1b, 0x00}, {0x1c, 0x00}, {0x1d, 0x00}, {0x1e, 0x00},
+	{0x1f, 0x00}, {0x20, 0x00}, {0x21, 0x00}, {0x22, 0x00}, {0x23, 0x00},
+	{0x24, 0x00}, {0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00},
+	{0x29, 0x00}, {0x2a, 0x00}, {0x2b, 0x00}, {0x2c, 0x00}, {0x2d, 0x00},
+	{0x2e, 0x00}, {0x2f, 0x00}, {0x30, 0x00}, {0x31, 0x00}, {0x32, 0x00},
+	{0x33, 0x00}, {0x34, 0x00}, {0x35, 0x00}, {0x36, 0x00}, {0x37, 0x00},
+	{LP5036_RESET, 0x00}
+};
+
+static const struct regmap_config lp5012_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = LP5012_RESET,
+	.reg_defaults = lp5012_reg_defs,
+	.num_reg_defaults = ARRAY_SIZE(lp5012_reg_defs),
+	.cache_type = REGCACHE_FLAT,
+};
+
+static const struct regmap_config lp5024_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = LP5024_RESET,
+	.reg_defaults = lp5024_reg_defs,
+	.num_reg_defaults = ARRAY_SIZE(lp5024_reg_defs),
+	.cache_type = REGCACHE_FLAT,
+};
+
+static const struct regmap_config lp5036_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = LP5036_RESET,
+	.reg_defaults = lp5036_reg_defs,
+	.num_reg_defaults = ARRAY_SIZE(lp5036_reg_defs),
+	.cache_type = REGCACHE_FLAT,
+};
+
+enum lp50xx_model {
+	LP5009,
+	LP5012,
+	LP5018,
+	LP5024,
+	LP5030,
+	LP5036,
+};
+
+/**
+ * struct lp50xx_chip_info -
+ * @lp50xx_regmap_config: regmap register configuration
+ * @model_id: LED device model
+ * @max_modules: total number of supported LED modules
+ * @num_leds: number of LED outputs available on the device
+ * @led_brightness0_reg: first brightness register of the device
+ * @mix_out0_reg: first color mix register of the device
+ * @bank_brt_reg: bank brightness register
+ * @bank_mix_reg: color mix register
+ * @reset_reg: device reset register
+ */
+struct lp50xx_chip_info {
+	const struct regmap_config *lp50xx_regmap_config;
+	int model_id;
+	u8 max_modules;
+	u8 num_leds;
+	u8 led_brightness0_reg;
+	u8 mix_out0_reg;
+	u8 bank_brt_reg;
+	u8 bank_mix_reg;
+	u8 reset_reg;
+};
+
+static const struct lp50xx_chip_info lp50xx_chip_info_tbl[] = {
+	[LP5009] = {
+		.model_id = LP5009,
+		.max_modules = LP5009_MAX_LED_MODULES,
+		.num_leds = LP5009_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
+		.led_brightness0_reg = LP5012_LED0_BRT,
+		.mix_out0_reg = LP5012_OUT0_CLR,
+		.bank_brt_reg = LP5012_BNK_BRT,
+		.bank_mix_reg = LP5012_BNKA_CLR,
+		.reset_reg = LP5012_RESET,
+		.lp50xx_regmap_config = &lp5012_regmap_config,
+	},
+	[LP5012] = {
+		.model_id = LP5012,
+		.max_modules = LP5012_MAX_LED_MODULES,
+		.num_leds = LP5012_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
+		.led_brightness0_reg = LP5012_LED0_BRT,
+		.mix_out0_reg = LP5012_OUT0_CLR,
+		.bank_brt_reg = LP5012_BNK_BRT,
+		.bank_mix_reg = LP5012_BNKA_CLR,
+		.reset_reg = LP5012_RESET,
+		.lp50xx_regmap_config = &lp5012_regmap_config,
+	},
+	[LP5018] = {
+		.model_id = LP5018,
+		.max_modules = LP5018_MAX_LED_MODULES,
+		.num_leds = LP5018_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
+		.led_brightness0_reg = LP5024_LED0_BRT,
+		.mix_out0_reg = LP5024_OUT0_CLR,
+		.bank_brt_reg = LP5024_BNK_BRT,
+		.bank_mix_reg = LP5024_BNKA_CLR,
+		.reset_reg = LP5024_RESET,
+		.lp50xx_regmap_config = &lp5024_regmap_config,
+	},
+	[LP5024] = {
+		.model_id = LP5024,
+		.max_modules = LP5024_MAX_LED_MODULES,
+		.num_leds = LP5024_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
+		.led_brightness0_reg = LP5024_LED0_BRT,
+		.mix_out0_reg = LP5024_OUT0_CLR,
+		.bank_brt_reg = LP5024_BNK_BRT,
+		.bank_mix_reg = LP5024_BNKA_CLR,
+		.reset_reg = LP5024_RESET,
+		.lp50xx_regmap_config = &lp5024_regmap_config,
+	},
+	[LP5030] = {
+		.model_id = LP5030,
+		.max_modules = LP5030_MAX_LED_MODULES,
+		.num_leds = LP5030_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
+		.led_brightness0_reg = LP5036_LED0_BRT,
+		.mix_out0_reg = LP5036_OUT0_CLR,
+		.bank_brt_reg = LP5036_BNK_BRT,
+		.bank_mix_reg = LP5036_BNKA_CLR,
+		.reset_reg = LP5036_RESET,
+		.lp50xx_regmap_config = &lp5036_regmap_config,
+	},
+	[LP5036] = {
+		.model_id = LP5036,
+		.max_modules = LP5036_MAX_LED_MODULES,
+		.num_leds = LP5036_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
+		.led_brightness0_reg = LP5036_LED0_BRT,
+		.mix_out0_reg = LP5036_OUT0_CLR,
+		.bank_brt_reg = LP5036_BNK_BRT,
+		.bank_mix_reg = LP5036_BNKA_CLR,
+		.reset_reg = LP5036_RESET,
+		.lp50xx_regmap_config = &lp5036_regmap_config,
+	},
+};
+
+struct lp50xx_led {
+	struct led_classdev_mc mc_cdev;
+	struct lp50xx *priv;
+	unsigned long bank_modules;
+	u8 ctrl_bank_enabled;
+	int led_number;
+};
+
+/**
+ * struct lp50xx -
+ * @enable_gpio: hardware enable gpio
+ * @regulator: LED supply regulator pointer
+ * @client: pointer to the I2C client
+ * @regmap: device register map
+ * @dev: pointer to the devices device struct
+ * @lock: lock for reading/writing the device
+ * @chip_info: chip specific information (ie num_leds)
+ * @num_of_banked_leds: holds the number of banked LEDs
+ * @leds: array of LED strings
+ */
+struct lp50xx {
+	struct gpio_desc *enable_gpio;
+	struct regulator *regulator;
+	struct i2c_client *client;
+	struct regmap *regmap;
+	struct device *dev;
+	struct mutex lock;
+	const struct lp50xx_chip_info *chip_info;
+	int num_of_banked_leds;
+
+	/* This needs to be at the end of the struct */
+	struct lp50xx_led leds[];
+};
+
+static struct lp50xx_led *mcled_cdev_to_led(struct led_classdev_mc *mc_cdev)
+{
+	return container_of(mc_cdev, struct lp50xx_led, mc_cdev);
+}
+
+static int lp50xx_brightness_set(struct led_classdev *cdev,
+			     enum led_brightness brightness)
+{
+	struct led_classdev_mc *mc_dev = lcdev_to_mccdev(cdev);
+	struct lp50xx_led *led = mcled_cdev_to_led(mc_dev);
+	const struct lp50xx_chip_info *led_chip = led->priv->chip_info;
+	u8 led_offset, reg_val;
+	int ret = 0;
+	int i;
+
+	mutex_lock(&led->priv->lock);
+	if (led->ctrl_bank_enabled)
+		reg_val = led_chip->bank_brt_reg;
+	else
+		reg_val = led_chip->led_brightness0_reg +
+			  led->led_number;
+
+	ret = regmap_write(led->priv->regmap, reg_val, brightness);
+	if (ret) {
+		dev_err(led->priv->dev,
+			"Cannot write brightness value %d\n", ret);
+		goto out;
+	}
+
+	for (i = 0; i < led->mc_cdev.num_colors; i++) {
+		if (led->ctrl_bank_enabled) {
+			reg_val = led_chip->bank_mix_reg + i;
+		} else {
+			led_offset = (led->led_number * 3) + i;
+			reg_val = led_chip->mix_out0_reg + led_offset;
+		}
+
+		ret = regmap_write(led->priv->regmap, reg_val,
+				   mc_dev->subled_info[i].intensity);
+		if (ret) {
+			dev_err(led->priv->dev,
+				"Cannot write intensity value %d\n", ret);
+			goto out;
+		}
+	}
+out:
+	mutex_unlock(&led->priv->lock);
+	return ret;
+}
+
+static int lp50xx_set_banks(struct lp50xx *priv, u32 led_banks[])
+{
+	u8 led_config_lo, led_config_hi;
+	u32 bank_enable_mask = 0;
+	int ret;
+	int i;
+
+	for (i = 0; i < priv->chip_info->max_modules; i++) {
+		if (led_banks[i])
+			bank_enable_mask |= (1 << led_banks[i]);
+	}
+
+	led_config_lo = bank_enable_mask;
+	led_config_hi = bank_enable_mask >> 8;
+
+	ret = regmap_write(priv->regmap, LP50XX_LED_CFG0, led_config_lo);
+	if (ret)
+		return ret;
+
+	if (priv->chip_info->model_id >= LP5030)
+		ret = regmap_write(priv->regmap, LP5036_LED_CFG1, led_config_hi);
+
+	return ret;
+}
+
+static int lp50xx_reset(struct lp50xx *priv)
+{
+	return regmap_write(priv->regmap, priv->chip_info->reset_reg, LP50XX_SW_RESET);
+}
+
+static int lp50xx_enable_disable(struct lp50xx *priv, int enable_disable)
+{
+	int ret;
+
+	ret = gpiod_direction_output(priv->enable_gpio, enable_disable);
+	if (ret)
+		return ret;
+
+	if (enable_disable)
+		return regmap_write(priv->regmap, LP50XX_DEV_CFG0, LP50XX_CHIP_EN);
+	else
+		return regmap_write(priv->regmap, LP50XX_DEV_CFG0, 0);
+
+}
+
+static int lp50xx_probe_leds(struct fwnode_handle *child, struct lp50xx *priv,
+			     struct lp50xx_led *led, int num_leds)
+{
+	u32 led_banks[LP5036_MAX_LED_MODULES] = {0};
+	int led_number;
+	int ret;
+
+	if (num_leds > 1) {
+		if (num_leds > priv->chip_info->max_modules) {
+			dev_err(priv->dev, "reg property is invalid\n");
+			return -EINVAL;
+		}
+
+		priv->num_of_banked_leds = num_leds;
+
+		ret = fwnode_property_read_u32_array(child, "reg", led_banks, num_leds);
+		if (ret) {
+			dev_err(priv->dev, "reg property is missing\n");
+			return ret;
+		}
+
+		ret = lp50xx_set_banks(priv, led_banks);
+		if (ret) {
+			dev_err(priv->dev, "Cannot setup banked LEDs\n");
+			return ret;
+		}
+
+		led->ctrl_bank_enabled = 1;
+	} else {
+		ret = fwnode_property_read_u32(child, "reg", &led_number);
+		if (ret) {
+			dev_err(priv->dev, "led reg property missing\n");
+			return ret;
+		}
+
+		if (led_number > priv->chip_info->num_leds) {
+			dev_err(priv->dev, "led-sources property is invalid\n");
+			return -EINVAL;
+		}
+
+		led->led_number = led_number;
+	}
+
+	return 0;
+}
+
+static int lp50xx_probe_dt(struct lp50xx *priv)
+{
+	struct fwnode_handle *child = NULL;
+	struct fwnode_handle *led_node = NULL;
+	struct led_init_data init_data = {};
+	struct led_classdev *led_cdev;
+	struct mc_subled *mc_led_info;
+	struct lp50xx_led *led;
+	int ret = -EINVAL;
+	int num_colors;
+	u32 color_id;
+	int i = 0;
+
+	priv->enable_gpio = devm_gpiod_get_optional(priv->dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(priv->enable_gpio))
+		return dev_err_probe(priv->dev, PTR_ERR(priv->enable_gpio),
+				     "Failed to get enable GPIO\n");
+
+	priv->regulator = devm_regulator_get(priv->dev, "vled");
+	if (IS_ERR(priv->regulator))
+		priv->regulator = NULL;
+
+	device_for_each_child_node(priv->dev, child) {
+		led = &priv->leds[i];
+		ret = fwnode_property_count_u32(child, "reg");
+		if (ret < 0) {
+			dev_err(priv->dev, "reg property is invalid\n");
+			goto child_out;
+		}
+
+		ret = lp50xx_probe_leds(child, priv, led, ret);
+		if (ret)
+			goto child_out;
+
+		init_data.fwnode = child;
+		num_colors = 0;
+
+		/*
+		 * There are only 3 LEDs per module otherwise they should be
+		 * banked which also is presented as 3 LEDs.
+		 */
+		mc_led_info = devm_kcalloc(priv->dev, LP50XX_LEDS_PER_MODULE,
+					   sizeof(*mc_led_info), GFP_KERNEL);
+		if (!mc_led_info) {
+			ret = -ENOMEM;
+			goto child_out;
+		}
+
+		fwnode_for_each_child_node(child, led_node) {
+			ret = fwnode_property_read_u32(led_node, "color",
+						       &color_id);
+			if (ret) {
+				fwnode_handle_put(led_node);
+				dev_err(priv->dev, "Cannot read color\n");
+				goto child_out;
+			}
+
+			mc_led_info[num_colors].color_index = color_id;
+			num_colors++;
+		}
+
+		led->priv = priv;
+		led->mc_cdev.num_colors = num_colors;
+		led->mc_cdev.subled_info = mc_led_info;
+		led_cdev = &led->mc_cdev.led_cdev;
+		led_cdev->brightness_set_blocking = lp50xx_brightness_set;
+
+		ret = devm_led_classdev_multicolor_register_ext(priv->dev,
+						       &led->mc_cdev,
+						       &init_data);
+		if (ret) {
+			dev_err(priv->dev, "led register err: %d\n", ret);
+			goto child_out;
+		}
+		i++;
+	}
+
+	return 0;
+
+child_out:
+	fwnode_handle_put(child);
+	return ret;
+}
+
+static int lp50xx_probe(struct i2c_client *client)
+{
+	struct lp50xx *led;
+	int count;
+	int ret;
+
+	count = device_get_child_node_count(&client->dev);
+	if (!count) {
+		dev_err(&client->dev, "LEDs are not defined in device tree!");
+		return -ENODEV;
+	}
+
+	led = devm_kzalloc(&client->dev, struct_size(led, leds, count),
+			   GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+
+	mutex_init(&led->lock);
+	led->client = client;
+	led->dev = &client->dev;
+	led->chip_info = device_get_match_data(&client->dev);
+	i2c_set_clientdata(client, led);
+	led->regmap = devm_regmap_init_i2c(client,
+					led->chip_info->lp50xx_regmap_config);
+	if (IS_ERR(led->regmap)) {
+		ret = PTR_ERR(led->regmap);
+		dev_err(&client->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = lp50xx_reset(led);
+	if (ret)
+		return ret;
+
+	ret = lp50xx_enable_disable(led, 1);
+	if (ret)
+		return ret;
+
+	return lp50xx_probe_dt(led);
+}
+
+static void lp50xx_remove(struct i2c_client *client)
+{
+	struct lp50xx *led = i2c_get_clientdata(client);
+	int ret;
+
+	ret = lp50xx_enable_disable(led, 0);
+	if (ret)
+		dev_err(led->dev, "Failed to disable chip\n");
+
+	if (led->regulator) {
+		ret = regulator_disable(led->regulator);
+		if (ret)
+			dev_err(led->dev, "Failed to disable regulator\n");
+	}
+
+	mutex_destroy(&led->lock);
+}
+
+static const struct i2c_device_id lp50xx_id[] = {
+	{ "lp5009", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5009] },
+	{ "lp5012", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5012] },
+	{ "lp5018", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5018] },
+	{ "lp5024", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5024] },
+	{ "lp5030", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5030] },
+	{ "lp5036", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5036] },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lp50xx_id);
+
+static const struct of_device_id of_lp50xx_leds_match[] = {
+	{ .compatible = "ti,lp5009", .data = &lp50xx_chip_info_tbl[LP5009] },
+	{ .compatible = "ti,lp5012", .data = &lp50xx_chip_info_tbl[LP5012] },
+	{ .compatible = "ti,lp5018", .data = &lp50xx_chip_info_tbl[LP5018] },
+	{ .compatible = "ti,lp5024", .data = &lp50xx_chip_info_tbl[LP5024] },
+	{ .compatible = "ti,lp5030", .data = &lp50xx_chip_info_tbl[LP5030] },
+	{ .compatible = "ti,lp5036", .data = &lp50xx_chip_info_tbl[LP5036] },
+	{}
+};
+MODULE_DEVICE_TABLE(of, of_lp50xx_leds_match);
+
+static struct i2c_driver lp50xx_driver = {
+	.driver = {
+		.name	= "lp50xx",
+		.of_match_table = of_lp50xx_leds_match,
+	},
+	.probe_new	= lp50xx_probe,
+	.remove		= lp50xx_remove,
+	.id_table	= lp50xx_id,
+};
+module_i2c_driver(lp50xx_driver);
+
+MODULE_DESCRIPTION("Texas Instruments LP50XX LED driver");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
+MODULE_LICENSE("GPL v2");