Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 180 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/lnbh25.c b/drivers/media/dvb-frontends/lnbh25.c
new file mode 100644
index 000000000..41bec0506
--- /dev/null
+++ b/drivers/media/dvb-frontends/lnbh25.c
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * lnbh25.c
+ *
+ * Driver for LNB supply and control IC LNBH25
+ *
+ * Copyright (C) 2014 NetUP Inc.
+ * Copyright (C) 2014 Sergey Kozlov <serjk@netup.ru>
+ * Copyright (C) 2014 Abylay Ospan <aospan@netup.ru>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+
+#include <media/dvb_frontend.h>
+#include "lnbh25.h"
+
+/**
+ * struct lnbh25_priv - LNBH25 driver private data
+ * @i2c:		pointer to the I2C adapter structure
+ * @i2c_address:	I2C address of LNBH25 SEC chip
+ * @config:		Registers configuration:
+ *			offset 0: 1st register address, always 0x02 (DATA1)
+ *			offset 1: DATA1 register value
+ *			offset 2: DATA2 register value
+ */
+struct lnbh25_priv {
+	struct i2c_adapter	*i2c;
+	u8			i2c_address;
+	u8			config[3];
+};
+
+#define LNBH25_STATUS_OFL	0x1
+#define LNBH25_STATUS_VMON	0x4
+#define LNBH25_VSEL_13		0x03
+#define LNBH25_VSEL_18		0x0a
+
+static int lnbh25_read_vmon(struct lnbh25_priv *priv)
+{
+	int i, ret;
+	u8 addr = 0x00;
+	u8 status[6];
+	struct i2c_msg msg[2] = {
+		{
+			.addr = priv->i2c_address,
+			.flags = 0,
+			.len = 1,
+			.buf = &addr
+		}, {
+			.addr = priv->i2c_address,
+			.flags = I2C_M_RD,
+			.len = sizeof(status),
+			.buf = status
+		}
+	};
+
+	for (i = 0; i < 2; i++) {
+		ret = i2c_transfer(priv->i2c, &msg[i], 1);
+		if (ret >= 0 && ret != 1)
+			ret = -EIO;
+		if (ret < 0) {
+			dev_dbg(&priv->i2c->dev,
+				"%s(): I2C transfer %d failed (%d)\n",
+				__func__, i, ret);
+			return ret;
+		}
+	}
+	dev_dbg(&priv->i2c->dev, "%s(): %*ph\n",
+		__func__, (int) sizeof(status), status);
+	if ((status[0] & (LNBH25_STATUS_OFL | LNBH25_STATUS_VMON)) != 0) {
+		dev_err(&priv->i2c->dev,
+			"%s(): voltage in failure state, status reg 0x%x\n",
+			__func__, status[0]);
+		return -EIO;
+	}
+	return 0;
+}
+
+static int lnbh25_set_voltage(struct dvb_frontend *fe,
+			      enum fe_sec_voltage voltage)
+{
+	int ret;
+	u8 data1_reg;
+	const char *vsel;
+	struct lnbh25_priv *priv = fe->sec_priv;
+	struct i2c_msg msg = {
+		.addr = priv->i2c_address,
+		.flags = 0,
+		.len = sizeof(priv->config),
+		.buf = priv->config
+	};
+
+	switch (voltage) {
+	case SEC_VOLTAGE_OFF:
+		data1_reg = 0x00;
+		vsel = "Off";
+		break;
+	case SEC_VOLTAGE_13:
+		data1_reg = LNBH25_VSEL_13;
+		vsel = "13V";
+		break;
+	case SEC_VOLTAGE_18:
+		data1_reg = LNBH25_VSEL_18;
+		vsel = "18V";
+		break;
+	default:
+		return -EINVAL;
+	}
+	priv->config[1] = data1_reg;
+	dev_dbg(&priv->i2c->dev,
+		"%s(): %s, I2C 0x%x write [ %02x %02x %02x ]\n",
+		__func__, vsel, priv->i2c_address,
+		priv->config[0], priv->config[1], priv->config[2]);
+	ret = i2c_transfer(priv->i2c, &msg, 1);
+	if (ret >= 0 && ret != 1)
+		ret = -EIO;
+	if (ret < 0) {
+		dev_err(&priv->i2c->dev, "%s(): I2C transfer error (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+	if (voltage != SEC_VOLTAGE_OFF) {
+		msleep(120);
+		ret = lnbh25_read_vmon(priv);
+	} else {
+		msleep(20);
+		ret = 0;
+	}
+	return ret;
+}
+
+static void lnbh25_release(struct dvb_frontend *fe)
+{
+	struct lnbh25_priv *priv = fe->sec_priv;
+
+	dev_dbg(&priv->i2c->dev, "%s()\n", __func__);
+	lnbh25_set_voltage(fe, SEC_VOLTAGE_OFF);
+	kfree(fe->sec_priv);
+	fe->sec_priv = NULL;
+}
+
+struct dvb_frontend *lnbh25_attach(struct dvb_frontend *fe,
+				   struct lnbh25_config *cfg,
+				   struct i2c_adapter *i2c)
+{
+	struct lnbh25_priv *priv;
+
+	dev_dbg(&i2c->dev, "%s()\n", __func__);
+	priv = kzalloc(sizeof(struct lnbh25_priv), GFP_KERNEL);
+	if (!priv)
+		return NULL;
+	priv->i2c_address = (cfg->i2c_address >> 1);
+	priv->i2c = i2c;
+	priv->config[0] = 0x02;
+	priv->config[1] = 0x00;
+	priv->config[2] = cfg->data2_config;
+	fe->sec_priv = priv;
+	if (lnbh25_set_voltage(fe, SEC_VOLTAGE_OFF)) {
+		dev_err(&i2c->dev,
+			"%s(): no LNBH25 found at I2C addr 0x%02x\n",
+			__func__, priv->i2c_address);
+		kfree(priv);
+		fe->sec_priv = NULL;
+		return NULL;
+	}
+
+	fe->ops.release_sec = lnbh25_release;
+	fe->ops.set_voltage = lnbh25_set_voltage;
+
+	dev_info(&i2c->dev, "%s(): attached at I2C addr 0x%02x\n",
+		__func__, priv->i2c_address);
+	return fe;
+}
+EXPORT_SYMBOL_GPL(lnbh25_attach);
+
+MODULE_DESCRIPTION("ST LNBH25 driver");
+MODULE_AUTHOR("info@netup.ru");
+MODULE_LICENSE("GPL");