Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1563 insertions, 0 deletions

diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
new file mode 100644
index 000000000..a238e6342
--- /dev/null
+++ b/drivers/media/i2c/ov772x.c
@@ -0,0 +1,1563 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ov772x Camera Driver
+ *
+ * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on ov7670 and soc_camera_platform driver,
+ *
+ * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
+ * Copyright (C) 2008 Magnus Damm
+ * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/v4l2-mediabus.h>
+#include <linux/videodev2.h>
+
+#include <media/i2c/ov772x.h>
+
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-image-sizes.h>
+#include <media/v4l2-subdev.h>
+
+/*
+ * register offset
+ */
+#define GAIN        0x00 /* AGC - Gain control gain setting */
+#define BLUE        0x01 /* AWB - Blue channel gain setting */
+#define RED         0x02 /* AWB - Red   channel gain setting */
+#define GREEN       0x03 /* AWB - Green channel gain setting */
+#define COM1        0x04 /* Common control 1 */
+#define BAVG        0x05 /* U/B Average Level */
+#define GAVG        0x06 /* Y/Gb Average Level */
+#define RAVG        0x07 /* V/R Average Level */
+#define AECH        0x08 /* Exposure Value - AEC MSBs */
+#define COM2        0x09 /* Common control 2 */
+#define PID         0x0A /* Product ID Number MSB */
+#define VER         0x0B /* Product ID Number LSB */
+#define COM3        0x0C /* Common control 3 */
+#define COM4        0x0D /* Common control 4 */
+#define COM5        0x0E /* Common control 5 */
+#define COM6        0x0F /* Common control 6 */
+#define AEC         0x10 /* Exposure Value */
+#define CLKRC       0x11 /* Internal clock */
+#define COM7        0x12 /* Common control 7 */
+#define COM8        0x13 /* Common control 8 */
+#define COM9        0x14 /* Common control 9 */
+#define COM10       0x15 /* Common control 10 */
+#define REG16       0x16 /* Register 16 */
+#define HSTART      0x17 /* Horizontal sensor size */
+#define HSIZE       0x18 /* Horizontal frame (HREF column) end high 8-bit */
+#define VSTART      0x19 /* Vertical frame (row) start high 8-bit */
+#define VSIZE       0x1A /* Vertical sensor size */
+#define PSHFT       0x1B /* Data format - pixel delay select */
+#define MIDH        0x1C /* Manufacturer ID byte - high */
+#define MIDL        0x1D /* Manufacturer ID byte - low  */
+#define LAEC        0x1F /* Fine AEC value */
+#define COM11       0x20 /* Common control 11 */
+#define BDBASE      0x22 /* Banding filter Minimum AEC value */
+#define DBSTEP      0x23 /* Banding filter Maximum Setp */
+#define AEW         0x24 /* AGC/AEC - Stable operating region (upper limit) */
+#define AEB         0x25 /* AGC/AEC - Stable operating region (lower limit) */
+#define VPT         0x26 /* AGC/AEC Fast mode operating region */
+#define REG28       0x28 /* Register 28 */
+#define HOUTSIZE    0x29 /* Horizontal data output size MSBs */
+#define EXHCH       0x2A /* Dummy pixel insert MSB */
+#define EXHCL       0x2B /* Dummy pixel insert LSB */
+#define VOUTSIZE    0x2C /* Vertical data output size MSBs */
+#define ADVFL       0x2D /* LSB of insert dummy lines in Vertical direction */
+#define ADVFH       0x2E /* MSG of insert dummy lines in Vertical direction */
+#define YAVE        0x2F /* Y/G Channel Average value */
+#define LUMHTH      0x30 /* Histogram AEC/AGC Luminance high level threshold */
+#define LUMLTH      0x31 /* Histogram AEC/AGC Luminance low  level threshold */
+#define HREF        0x32 /* Image start and size control */
+#define DM_LNL      0x33 /* Dummy line low  8 bits */
+#define DM_LNH      0x34 /* Dummy line high 8 bits */
+#define ADOFF_B     0x35 /* AD offset compensation value for B  channel */
+#define ADOFF_R     0x36 /* AD offset compensation value for R  channel */
+#define ADOFF_GB    0x37 /* AD offset compensation value for Gb channel */
+#define ADOFF_GR    0x38 /* AD offset compensation value for Gr channel */
+#define OFF_B       0x39 /* Analog process B  channel offset value */
+#define OFF_R       0x3A /* Analog process R  channel offset value */
+#define OFF_GB      0x3B /* Analog process Gb channel offset value */
+#define OFF_GR      0x3C /* Analog process Gr channel offset value */
+#define COM12       0x3D /* Common control 12 */
+#define COM13       0x3E /* Common control 13 */
+#define COM14       0x3F /* Common control 14 */
+#define COM15       0x40 /* Common control 15*/
+#define COM16       0x41 /* Common control 16 */
+#define TGT_B       0x42 /* BLC blue channel target value */
+#define TGT_R       0x43 /* BLC red  channel target value */
+#define TGT_GB      0x44 /* BLC Gb   channel target value */
+#define TGT_GR      0x45 /* BLC Gr   channel target value */
+/* for ov7720 */
+#define LCC0        0x46 /* Lens correction control 0 */
+#define LCC1        0x47 /* Lens correction option 1 - X coordinate */
+#define LCC2        0x48 /* Lens correction option 2 - Y coordinate */
+#define LCC3        0x49 /* Lens correction option 3 */
+#define LCC4        0x4A /* Lens correction option 4 - radius of the circular */
+#define LCC5        0x4B /* Lens correction option 5 */
+#define LCC6        0x4C /* Lens correction option 6 */
+/* for ov7725 */
+#define LC_CTR      0x46 /* Lens correction control */
+#define LC_XC       0x47 /* X coordinate of lens correction center relative */
+#define LC_YC       0x48 /* Y coordinate of lens correction center relative */
+#define LC_COEF     0x49 /* Lens correction coefficient */
+#define LC_RADI     0x4A /* Lens correction radius */
+#define LC_COEFB    0x4B /* Lens B channel compensation coefficient */
+#define LC_COEFR    0x4C /* Lens R channel compensation coefficient */
+
+#define FIXGAIN     0x4D /* Analog fix gain amplifer */
+#define AREF0       0x4E /* Sensor reference control */
+#define AREF1       0x4F /* Sensor reference current control */
+#define AREF2       0x50 /* Analog reference control */
+#define AREF3       0x51 /* ADC    reference control */
+#define AREF4       0x52 /* ADC    reference control */
+#define AREF5       0x53 /* ADC    reference control */
+#define AREF6       0x54 /* Analog reference control */
+#define AREF7       0x55 /* Analog reference control */
+#define UFIX        0x60 /* U channel fixed value output */
+#define VFIX        0x61 /* V channel fixed value output */
+#define AWBB_BLK    0x62 /* AWB option for advanced AWB */
+#define AWB_CTRL0   0x63 /* AWB control byte 0 */
+#define DSP_CTRL1   0x64 /* DSP control byte 1 */
+#define DSP_CTRL2   0x65 /* DSP control byte 2 */
+#define DSP_CTRL3   0x66 /* DSP control byte 3 */
+#define DSP_CTRL4   0x67 /* DSP control byte 4 */
+#define AWB_BIAS    0x68 /* AWB BLC level clip */
+#define AWB_CTRL1   0x69 /* AWB control  1 */
+#define AWB_CTRL2   0x6A /* AWB control  2 */
+#define AWB_CTRL3   0x6B /* AWB control  3 */
+#define AWB_CTRL4   0x6C /* AWB control  4 */
+#define AWB_CTRL5   0x6D /* AWB control  5 */
+#define AWB_CTRL6   0x6E /* AWB control  6 */
+#define AWB_CTRL7   0x6F /* AWB control  7 */
+#define AWB_CTRL8   0x70 /* AWB control  8 */
+#define AWB_CTRL9   0x71 /* AWB control  9 */
+#define AWB_CTRL10  0x72 /* AWB control 10 */
+#define AWB_CTRL11  0x73 /* AWB control 11 */
+#define AWB_CTRL12  0x74 /* AWB control 12 */
+#define AWB_CTRL13  0x75 /* AWB control 13 */
+#define AWB_CTRL14  0x76 /* AWB control 14 */
+#define AWB_CTRL15  0x77 /* AWB control 15 */
+#define AWB_CTRL16  0x78 /* AWB control 16 */
+#define AWB_CTRL17  0x79 /* AWB control 17 */
+#define AWB_CTRL18  0x7A /* AWB control 18 */
+#define AWB_CTRL19  0x7B /* AWB control 19 */
+#define AWB_CTRL20  0x7C /* AWB control 20 */
+#define AWB_CTRL21  0x7D /* AWB control 21 */
+#define GAM1        0x7E /* Gamma Curve  1st segment input end point */
+#define GAM2        0x7F /* Gamma Curve  2nd segment input end point */
+#define GAM3        0x80 /* Gamma Curve  3rd segment input end point */
+#define GAM4        0x81 /* Gamma Curve  4th segment input end point */
+#define GAM5        0x82 /* Gamma Curve  5th segment input end point */
+#define GAM6        0x83 /* Gamma Curve  6th segment input end point */
+#define GAM7        0x84 /* Gamma Curve  7th segment input end point */
+#define GAM8        0x85 /* Gamma Curve  8th segment input end point */
+#define GAM9        0x86 /* Gamma Curve  9th segment input end point */
+#define GAM10       0x87 /* Gamma Curve 10th segment input end point */
+#define GAM11       0x88 /* Gamma Curve 11th segment input end point */
+#define GAM12       0x89 /* Gamma Curve 12th segment input end point */
+#define GAM13       0x8A /* Gamma Curve 13th segment input end point */
+#define GAM14       0x8B /* Gamma Curve 14th segment input end point */
+#define GAM15       0x8C /* Gamma Curve 15th segment input end point */
+#define SLOP        0x8D /* Gamma curve highest segment slope */
+#define DNSTH       0x8E /* De-noise threshold */
+#define EDGE_STRNGT 0x8F /* Edge strength  control when manual mode */
+#define EDGE_TRSHLD 0x90 /* Edge threshold control when manual mode */
+#define DNSOFF      0x91 /* Auto De-noise threshold control */
+#define EDGE_UPPER  0x92 /* Edge strength upper limit when Auto mode */
+#define EDGE_LOWER  0x93 /* Edge strength lower limit when Auto mode */
+#define MTX1        0x94 /* Matrix coefficient 1 */
+#define MTX2        0x95 /* Matrix coefficient 2 */
+#define MTX3        0x96 /* Matrix coefficient 3 */
+#define MTX4        0x97 /* Matrix coefficient 4 */
+#define MTX5        0x98 /* Matrix coefficient 5 */
+#define MTX6        0x99 /* Matrix coefficient 6 */
+#define MTX_CTRL    0x9A /* Matrix control */
+#define BRIGHT      0x9B /* Brightness control */
+#define CNTRST      0x9C /* Contrast contrast */
+#define CNTRST_CTRL 0x9D /* Contrast contrast center */
+#define UVAD_J0     0x9E /* Auto UV adjust contrast 0 */
+#define UVAD_J1     0x9F /* Auto UV adjust contrast 1 */
+#define SCAL0       0xA0 /* Scaling control 0 */
+#define SCAL1       0xA1 /* Scaling control 1 */
+#define SCAL2       0xA2 /* Scaling control 2 */
+#define FIFODLYM    0xA3 /* FIFO manual mode delay control */
+#define FIFODLYA    0xA4 /* FIFO auto   mode delay control */
+#define SDE         0xA6 /* Special digital effect control */
+#define USAT        0xA7 /* U component saturation control */
+#define VSAT        0xA8 /* V component saturation control */
+/* for ov7720 */
+#define HUE0        0xA9 /* Hue control 0 */
+#define HUE1        0xAA /* Hue control 1 */
+/* for ov7725 */
+#define HUECOS      0xA9 /* Cosine value */
+#define HUESIN      0xAA /* Sine value */
+
+#define SIGN        0xAB /* Sign bit for Hue and contrast */
+#define DSPAUTO     0xAC /* DSP auto function ON/OFF control */
+
+/*
+ * register detail
+ */
+
+/* COM2 */
+#define SOFT_SLEEP_MODE 0x10	/* Soft sleep mode */
+				/* Output drive capability */
+#define OCAP_1x         0x00	/* 1x */
+#define OCAP_2x         0x01	/* 2x */
+#define OCAP_3x         0x02	/* 3x */
+#define OCAP_4x         0x03	/* 4x */
+
+/* COM3 */
+#define SWAP_MASK       (SWAP_RGB | SWAP_YUV | SWAP_ML)
+#define IMG_MASK        (VFLIP_IMG | HFLIP_IMG | SCOLOR_TEST)
+
+#define VFLIP_IMG       0x80	/* Vertical flip image ON/OFF selection */
+#define HFLIP_IMG       0x40	/* Horizontal mirror image ON/OFF selection */
+#define SWAP_RGB        0x20	/* Swap B/R  output sequence in RGB mode */
+#define SWAP_YUV        0x10	/* Swap Y/UV output sequence in YUV mode */
+#define SWAP_ML         0x08	/* Swap output MSB/LSB */
+				/* Tri-state option for output clock */
+#define NOTRI_CLOCK     0x04	/*   0: Tri-state    at this period */
+				/*   1: No tri-state at this period */
+				/* Tri-state option for output data */
+#define NOTRI_DATA      0x02	/*   0: Tri-state    at this period */
+				/*   1: No tri-state at this period */
+#define SCOLOR_TEST     0x01	/* Sensor color bar test pattern */
+
+/* COM4 */
+				/* PLL frequency control */
+#define PLL_BYPASS      0x00	/*  00: Bypass PLL */
+#define PLL_4x          0x40	/*  01: PLL 4x */
+#define PLL_6x          0x80	/*  10: PLL 6x */
+#define PLL_8x          0xc0	/*  11: PLL 8x */
+				/* AEC evaluate window */
+#define AEC_FULL        0x00	/*  00: Full window */
+#define AEC_1p2         0x10	/*  01: 1/2  window */
+#define AEC_1p4         0x20	/*  10: 1/4  window */
+#define AEC_2p3         0x30	/*  11: Low 2/3 window */
+#define COM4_RESERVED   0x01	/* Reserved bit */
+
+/* COM5 */
+#define AFR_ON_OFF      0x80	/* Auto frame rate control ON/OFF selection */
+#define AFR_SPPED       0x40	/* Auto frame rate control speed selection */
+				/* Auto frame rate max rate control */
+#define AFR_NO_RATE     0x00	/*     No  reduction of frame rate */
+#define AFR_1p2         0x10	/*     Max reduction to 1/2 frame rate */
+#define AFR_1p4         0x20	/*     Max reduction to 1/4 frame rate */
+#define AFR_1p8         0x30	/* Max reduction to 1/8 frame rate */
+				/* Auto frame rate active point control */
+#define AF_2x           0x00	/*     Add frame when AGC reaches  2x gain */
+#define AF_4x           0x04	/*     Add frame when AGC reaches  4x gain */
+#define AF_8x           0x08	/*     Add frame when AGC reaches  8x gain */
+#define AF_16x          0x0c	/* Add frame when AGC reaches 16x gain */
+				/* AEC max step control */
+#define AEC_NO_LIMIT    0x01	/*   0 : AEC incease step has limit */
+				/*   1 : No limit to AEC increase step */
+/* CLKRC */
+				/* Input clock divider register */
+#define CLKRC_RESERVED  0x80	/* Reserved bit */
+#define CLKRC_DIV(n)    ((n) - 1)
+
+/* COM7 */
+				/* SCCB Register Reset */
+#define SCCB_RESET      0x80	/*   0 : No change */
+				/*   1 : Resets all registers to default */
+				/* Resolution selection */
+#define SLCT_MASK       0x40	/*   Mask of VGA or QVGA */
+#define SLCT_VGA        0x00	/*   0 : VGA */
+#define SLCT_QVGA       0x40	/*   1 : QVGA */
+#define ITU656_ON_OFF   0x20	/* ITU656 protocol ON/OFF selection */
+#define SENSOR_RAW	0x10	/* Sensor RAW */
+				/* RGB output format control */
+#define FMT_MASK        0x0c	/*      Mask of color format */
+#define FMT_GBR422      0x00	/*      00 : GBR 4:2:2 */
+#define FMT_RGB565      0x04	/*      01 : RGB 565 */
+#define FMT_RGB555      0x08	/*      10 : RGB 555 */
+#define FMT_RGB444      0x0c	/* 11 : RGB 444 */
+				/* Output format control */
+#define OFMT_MASK       0x03    /*      Mask of output format */
+#define OFMT_YUV        0x00	/*      00 : YUV */
+#define OFMT_P_BRAW     0x01	/*      01 : Processed Bayer RAW */
+#define OFMT_RGB        0x02	/*      10 : RGB */
+#define OFMT_BRAW       0x03	/* 11 : Bayer RAW */
+
+/* COM8 */
+#define FAST_ALGO       0x80	/* Enable fast AGC/AEC algorithm */
+				/* AEC Setp size limit */
+#define UNLMT_STEP      0x40	/*   0 : Step size is limited */
+				/*   1 : Unlimited step size */
+#define BNDF_ON_OFF     0x20	/* Banding filter ON/OFF */
+#define AEC_BND         0x10	/* Enable AEC below banding value */
+#define AEC_ON_OFF      0x08	/* Fine AEC ON/OFF control */
+#define AGC_ON          0x04	/* AGC Enable */
+#define AWB_ON          0x02	/* AWB Enable */
+#define AEC_ON          0x01	/* AEC Enable */
+
+/* COM9 */
+#define BASE_AECAGC     0x80	/* Histogram or average based AEC/AGC */
+				/* Automatic gain ceiling - maximum AGC value */
+#define GAIN_2x         0x00	/*    000 :   2x */
+#define GAIN_4x         0x10	/*    001 :   4x */
+#define GAIN_8x         0x20	/*    010 :   8x */
+#define GAIN_16x        0x30	/*    011 :  16x */
+#define GAIN_32x        0x40	/*    100 :  32x */
+#define GAIN_64x        0x50	/* 101 :  64x */
+#define GAIN_128x       0x60	/* 110 : 128x */
+#define DROP_VSYNC      0x04	/* Drop VSYNC output of corrupt frame */
+#define DROP_HREF       0x02	/* Drop HREF  output of corrupt frame */
+
+/* COM11 */
+#define SGLF_ON_OFF     0x02	/* Single frame ON/OFF selection */
+#define SGLF_TRIG       0x01	/* Single frame transfer trigger */
+
+/* HREF */
+#define HREF_VSTART_SHIFT	6	/* VSTART LSB */
+#define HREF_HSTART_SHIFT	4	/* HSTART 2 LSBs */
+#define HREF_VSIZE_SHIFT	2	/* VSIZE LSB */
+#define HREF_HSIZE_SHIFT	0	/* HSIZE 2 LSBs */
+
+/* EXHCH */
+#define EXHCH_VSIZE_SHIFT	2	/* VOUTSIZE LSB */
+#define EXHCH_HSIZE_SHIFT	0	/* HOUTSIZE 2 LSBs */
+
+/* DSP_CTRL1 */
+#define FIFO_ON         0x80	/* FIFO enable/disable selection */
+#define UV_ON_OFF       0x40	/* UV adjust function ON/OFF selection */
+#define YUV444_2_422    0x20	/* YUV444 to 422 UV channel option selection */
+#define CLR_MTRX_ON_OFF 0x10	/* Color matrix ON/OFF selection */
+#define INTPLT_ON_OFF   0x08	/* Interpolation ON/OFF selection */
+#define GMM_ON_OFF      0x04	/* Gamma function ON/OFF selection */
+#define AUTO_BLK_ON_OFF 0x02	/* Black defect auto correction ON/OFF */
+#define AUTO_WHT_ON_OFF 0x01	/* White define auto correction ON/OFF */
+
+/* DSP_CTRL3 */
+#define UV_MASK         0x80	/* UV output sequence option */
+#define UV_ON           0x80	/*   ON */
+#define UV_OFF          0x00	/*   OFF */
+#define CBAR_MASK       0x20	/* DSP Color bar mask */
+#define CBAR_ON         0x20	/*   ON */
+#define CBAR_OFF        0x00	/*   OFF */
+
+/* DSP_CTRL4 */
+#define DSP_OFMT_YUV	0x00
+#define DSP_OFMT_RGB	0x00
+#define DSP_OFMT_RAW8	0x02
+#define DSP_OFMT_RAW10	0x03
+
+/* DSPAUTO (DSP Auto Function ON/OFF Control) */
+#define AWB_ACTRL       0x80 /* AWB auto threshold control */
+#define DENOISE_ACTRL   0x40 /* De-noise auto threshold control */
+#define EDGE_ACTRL      0x20 /* Edge enhancement auto strength control */
+#define UV_ACTRL        0x10 /* UV adjust auto slope control */
+#define SCAL0_ACTRL     0x08 /* Auto scaling factor control */
+#define SCAL1_2_ACTRL   0x04 /* Auto scaling factor control */
+
+#define OV772X_MAX_WIDTH	VGA_WIDTH
+#define OV772X_MAX_HEIGHT	VGA_HEIGHT
+
+/*
+ * ID
+ */
+#define OV7720  0x7720
+#define OV7725  0x7721
+#define VERSION(pid, ver) ((pid << 8) | (ver & 0xFF))
+
+/*
+ * PLL multipliers
+ */
+static struct {
+	unsigned int mult;
+	u8 com4;
+} ov772x_pll[] = {
+	{ 1, PLL_BYPASS, },
+	{ 4, PLL_4x, },
+	{ 6, PLL_6x, },
+	{ 8, PLL_8x, },
+};
+
+/*
+ * struct
+ */
+
+struct ov772x_color_format {
+	u32 code;
+	enum v4l2_colorspace colorspace;
+	u8 dsp3;
+	u8 dsp4;
+	u8 com3;
+	u8 com7;
+};
+
+struct ov772x_win_size {
+	char                     *name;
+	unsigned char             com7_bit;
+	unsigned int		  sizeimage;
+	struct v4l2_rect	  rect;
+};
+
+struct ov772x_priv {
+	struct v4l2_subdev                subdev;
+	struct v4l2_ctrl_handler	  hdl;
+	struct clk			 *clk;
+	struct regmap			 *regmap;
+	struct ov772x_camera_info        *info;
+	struct gpio_desc		 *pwdn_gpio;
+	struct gpio_desc		 *rstb_gpio;
+	const struct ov772x_color_format *cfmt;
+	const struct ov772x_win_size     *win;
+	struct v4l2_ctrl		 *vflip_ctrl;
+	struct v4l2_ctrl		 *hflip_ctrl;
+	unsigned int			  test_pattern;
+	/* band_filter = COM8[5] ? 256 - BDBASE : 0 */
+	struct v4l2_ctrl		 *band_filter_ctrl;
+	unsigned int			  fps;
+	/* lock to protect power_count and streaming */
+	struct mutex			  lock;
+	int				  power_count;
+	int				  streaming;
+#ifdef CONFIG_MEDIA_CONTROLLER
+	struct media_pad pad;
+#endif
+	enum v4l2_mbus_type		  bus_type;
+};
+
+/*
+ * supported color format list
+ */
+static const struct ov772x_color_format ov772x_cfmts[] = {
+	{
+		.code		= MEDIA_BUS_FMT_YUYV8_2X8,
+		.colorspace	= V4L2_COLORSPACE_SRGB,
+		.dsp3		= 0x0,
+		.dsp4		= DSP_OFMT_YUV,
+		.com3		= SWAP_YUV,
+		.com7		= OFMT_YUV,
+	},
+	{
+		.code		= MEDIA_BUS_FMT_YVYU8_2X8,
+		.colorspace	= V4L2_COLORSPACE_SRGB,
+		.dsp3		= UV_ON,
+		.dsp4		= DSP_OFMT_YUV,
+		.com3		= SWAP_YUV,
+		.com7		= OFMT_YUV,
+	},
+	{
+		.code		= MEDIA_BUS_FMT_UYVY8_2X8,
+		.colorspace	= V4L2_COLORSPACE_SRGB,
+		.dsp3		= 0x0,
+		.dsp4		= DSP_OFMT_YUV,
+		.com3		= 0x0,
+		.com7		= OFMT_YUV,
+	},
+	{
+		.code		= MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE,
+		.colorspace	= V4L2_COLORSPACE_SRGB,
+		.dsp3		= 0x0,
+		.dsp4		= DSP_OFMT_YUV,
+		.com3		= SWAP_RGB,
+		.com7		= FMT_RGB555 | OFMT_RGB,
+	},
+	{
+		.code		= MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE,
+		.colorspace	= V4L2_COLORSPACE_SRGB,
+		.dsp3		= 0x0,
+		.dsp4		= DSP_OFMT_YUV,
+		.com3		= 0x0,
+		.com7		= FMT_RGB555 | OFMT_RGB,
+	},
+	{
+		.code		= MEDIA_BUS_FMT_RGB565_2X8_LE,
+		.colorspace	= V4L2_COLORSPACE_SRGB,
+		.dsp3		= 0x0,
+		.dsp4		= DSP_OFMT_YUV,
+		.com3		= SWAP_RGB,
+		.com7		= FMT_RGB565 | OFMT_RGB,
+	},
+	{
+		.code		= MEDIA_BUS_FMT_RGB565_2X8_BE,
+		.colorspace	= V4L2_COLORSPACE_SRGB,
+		.dsp3		= 0x0,
+		.dsp4		= DSP_OFMT_YUV,
+		.com3		= 0x0,
+		.com7		= FMT_RGB565 | OFMT_RGB,
+	},
+	{
+		/* Setting DSP4 to DSP_OFMT_RAW8 still gives 10-bit output,
+		 * regardless of the COM7 value. We can thus only support 10-bit
+		 * Bayer until someone figures it out.
+		 */
+		.code		= MEDIA_BUS_FMT_SBGGR10_1X10,
+		.colorspace	= V4L2_COLORSPACE_SRGB,
+		.dsp3		= 0x0,
+		.dsp4		= DSP_OFMT_RAW10,
+		.com3		= 0x0,
+		.com7		= SENSOR_RAW | OFMT_BRAW,
+	},
+};
+
+/*
+ * window size list
+ */
+
+static const struct ov772x_win_size ov772x_win_sizes[] = {
+	{
+		.name		= "VGA",
+		.com7_bit	= SLCT_VGA,
+		.sizeimage	= 510 * 748,
+		.rect = {
+			.left	= 140,
+			.top	= 14,
+			.width	= VGA_WIDTH,
+			.height	= VGA_HEIGHT,
+		},
+	}, {
+		.name		= "QVGA",
+		.com7_bit	= SLCT_QVGA,
+		.sizeimage	= 278 * 576,
+		.rect = {
+			.left	= 252,
+			.top	= 6,
+			.width	= QVGA_WIDTH,
+			.height	= QVGA_HEIGHT,
+		},
+	},
+};
+
+static const char * const ov772x_test_pattern_menu[] = {
+	"Disabled",
+	"Vertical Color Bar Type 1",
+};
+
+/*
+ * frame rate settings lists
+ */
+static const unsigned int ov772x_frame_intervals[] = { 5, 10, 15, 20, 30, 60 };
+
+/*
+ * general function
+ */
+
+static struct ov772x_priv *to_ov772x(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct ov772x_priv, subdev);
+}
+
+static int ov772x_reset(struct ov772x_priv *priv)
+{
+	int ret;
+
+	ret = regmap_write(priv->regmap, COM7, SCCB_RESET);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(1000, 5000);
+
+	return regmap_update_bits(priv->regmap, COM2, SOFT_SLEEP_MODE,
+				  SOFT_SLEEP_MODE);
+}
+
+/*
+ * subdev ops
+ */
+
+static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct ov772x_priv *priv = to_ov772x(sd);
+	int ret = 0;
+
+	mutex_lock(&priv->lock);
+
+	if (priv->streaming == enable)
+		goto done;
+
+	if (priv->bus_type == V4L2_MBUS_BT656) {
+		ret = regmap_update_bits(priv->regmap, COM7, ITU656_ON_OFF,
+					 enable ?
+					 ITU656_ON_OFF : ~ITU656_ON_OFF);
+		if (ret)
+			goto done;
+	}
+
+	ret = regmap_update_bits(priv->regmap, COM2, SOFT_SLEEP_MODE,
+				 enable ? 0 : SOFT_SLEEP_MODE);
+	if (ret)
+		goto done;
+
+	if (enable) {
+		dev_dbg(&client->dev, "format %d, win %s\n",
+			priv->cfmt->code, priv->win->name);
+	}
+	priv->streaming = enable;
+
+done:
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static unsigned int ov772x_select_fps(struct ov772x_priv *priv,
+				      struct v4l2_fract *tpf)
+{
+	unsigned int fps = tpf->numerator ?
+			   tpf->denominator / tpf->numerator :
+			   tpf->denominator;
+	unsigned int best_diff;
+	unsigned int diff;
+	unsigned int idx;
+	unsigned int i;
+
+	/* Approximate to the closest supported frame interval. */
+	best_diff = ~0L;
+	for (i = 0, idx = 0; i < ARRAY_SIZE(ov772x_frame_intervals); i++) {
+		diff = abs(fps - ov772x_frame_intervals[i]);
+		if (diff < best_diff) {
+			idx = i;
+			best_diff = diff;
+		}
+	}
+
+	return ov772x_frame_intervals[idx];
+}
+
+static int ov772x_set_frame_rate(struct ov772x_priv *priv,
+				 unsigned int fps,
+				 const struct ov772x_color_format *cfmt,
+				 const struct ov772x_win_size *win)
+{
+	unsigned long fin = clk_get_rate(priv->clk);
+	unsigned int best_diff;
+	unsigned int fsize;
+	unsigned int pclk;
+	unsigned int diff;
+	unsigned int i;
+	u8 clkrc = 0;
+	u8 com4 = 0;
+	int ret;
+
+	/* Use image size (with blankings) to calculate desired pixel clock. */
+	switch (cfmt->com7 & OFMT_MASK) {
+	case OFMT_BRAW:
+		fsize = win->sizeimage;
+		break;
+	case OFMT_RGB:
+	case OFMT_YUV:
+	default:
+		fsize = win->sizeimage * 2;
+		break;
+	}
+
+	pclk = fps * fsize;
+
+	/*
+	 * Pixel clock generation circuit is pretty simple:
+	 *
+	 * Fin -> [ / CLKRC_div] -> [ * PLL_mult] -> pclk
+	 *
+	 * Try to approximate the desired pixel clock testing all available
+	 * PLL multipliers (1x, 4x, 6x, 8x) and calculate corresponding
+	 * divisor with:
+	 *
+	 * div = PLL_mult * Fin / pclk
+	 *
+	 * and re-calculate the pixel clock using it:
+	 *
+	 * pclk = Fin * PLL_mult / CLKRC_div
+	 *
+	 * Choose the PLL_mult and CLKRC_div pair that gives a pixel clock
+	 * closer to the desired one.
+	 *
+	 * The desired pixel clock is calculated using a known frame size
+	 * (blanking included) and FPS.
+	 */
+	best_diff = ~0L;
+	for (i = 0; i < ARRAY_SIZE(ov772x_pll); i++) {
+		unsigned int pll_mult = ov772x_pll[i].mult;
+		unsigned int pll_out = pll_mult * fin;
+		unsigned int t_pclk;
+		unsigned int div;
+
+		if (pll_out < pclk)
+			continue;
+
+		div = DIV_ROUND_CLOSEST(pll_out, pclk);
+		t_pclk = DIV_ROUND_CLOSEST(fin * pll_mult, div);
+		diff = abs(pclk - t_pclk);
+		if (diff < best_diff) {
+			best_diff = diff;
+			clkrc = CLKRC_DIV(div);
+			com4 = ov772x_pll[i].com4;
+		}
+	}
+
+	ret = regmap_write(priv->regmap, COM4, com4 | COM4_RESERVED);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(priv->regmap, CLKRC, clkrc | CLKRC_RESERVED);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int ov772x_g_frame_interval(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_frame_interval *ival)
+{
+	struct ov772x_priv *priv = to_ov772x(sd);
+	struct v4l2_fract *tpf = &ival->interval;
+
+	tpf->numerator = 1;
+	tpf->denominator = priv->fps;
+
+	return 0;
+}
+
+static int ov772x_s_frame_interval(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_frame_interval *ival)
+{
+	struct ov772x_priv *priv = to_ov772x(sd);
+	struct v4l2_fract *tpf = &ival->interval;
+	unsigned int fps;
+	int ret = 0;
+
+	mutex_lock(&priv->lock);
+
+	if (priv->streaming) {
+		ret = -EBUSY;
+		goto error;
+	}
+
+	fps = ov772x_select_fps(priv, tpf);
+
+	/*
+	 * If the device is not powered up by the host driver do
+	 * not apply any changes to H/W at this time. Instead
+	 * the frame rate will be restored right after power-up.
+	 */
+	if (priv->power_count > 0) {
+		ret = ov772x_set_frame_rate(priv, fps, priv->cfmt, priv->win);
+		if (ret)
+			goto error;
+	}
+
+	tpf->numerator = 1;
+	tpf->denominator = fps;
+	priv->fps = fps;
+
+error:
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct ov772x_priv *priv = container_of(ctrl->handler,
+						struct ov772x_priv, hdl);
+	struct regmap *regmap = priv->regmap;
+	int ret = 0;
+	u8 val;
+
+	/* v4l2_ctrl_lock() locks our own mutex */
+
+	/*
+	 * If the device is not powered up by the host driver do
+	 * not apply any controls to H/W at this time. Instead
+	 * the controls will be restored right after power-up.
+	 */
+	if (priv->power_count == 0)
+		return 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_VFLIP:
+		val = ctrl->val ? VFLIP_IMG : 0x00;
+		if (priv->info && (priv->info->flags & OV772X_FLAG_VFLIP))
+			val ^= VFLIP_IMG;
+		return regmap_update_bits(regmap, COM3, VFLIP_IMG, val);
+	case V4L2_CID_HFLIP:
+		val = ctrl->val ? HFLIP_IMG : 0x00;
+		if (priv->info && (priv->info->flags & OV772X_FLAG_HFLIP))
+			val ^= HFLIP_IMG;
+		return regmap_update_bits(regmap, COM3, HFLIP_IMG, val);
+	case V4L2_CID_BAND_STOP_FILTER:
+		if (!ctrl->val) {
+			/* Switch the filter off, it is on now */
+			ret = regmap_update_bits(regmap, BDBASE, 0xff, 0xff);
+			if (!ret)
+				ret = regmap_update_bits(regmap, COM8,
+							 BNDF_ON_OFF, 0);
+		} else {
+			/* Switch the filter on, set AEC low limit */
+			val = 256 - ctrl->val;
+			ret = regmap_update_bits(regmap, COM8,
+						 BNDF_ON_OFF, BNDF_ON_OFF);
+			if (!ret)
+				ret = regmap_update_bits(regmap, BDBASE,
+							 0xff, val);
+		}
+
+		return ret;
+	case V4L2_CID_TEST_PATTERN:
+		priv->test_pattern = ctrl->val;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int ov772x_g_register(struct v4l2_subdev *sd,
+			     struct v4l2_dbg_register *reg)
+{
+	struct ov772x_priv *priv = to_ov772x(sd);
+	int ret;
+	unsigned int val;
+
+	reg->size = 1;
+	if (reg->reg > 0xff)
+		return -EINVAL;
+
+	ret = regmap_read(priv->regmap, reg->reg, &val);
+	if (ret < 0)
+		return ret;
+
+	reg->val = (__u64)val;
+
+	return 0;
+}
+
+static int ov772x_s_register(struct v4l2_subdev *sd,
+			     const struct v4l2_dbg_register *reg)
+{
+	struct ov772x_priv *priv = to_ov772x(sd);
+
+	if (reg->reg > 0xff ||
+	    reg->val > 0xff)
+		return -EINVAL;
+
+	return regmap_write(priv->regmap, reg->reg, reg->val);
+}
+#endif
+
+static int ov772x_power_on(struct ov772x_priv *priv)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
+	int ret;
+
+	if (priv->clk) {
+		ret = clk_prepare_enable(priv->clk);
+		if (ret)
+			return ret;
+	}
+
+	if (priv->pwdn_gpio) {
+		gpiod_set_value(priv->pwdn_gpio, 1);
+		usleep_range(500, 1000);
+	}
+
+	/*
+	 * FIXME: The reset signal is connected to a shared GPIO on some
+	 * platforms (namely the SuperH Migo-R). Until a framework becomes
+	 * available to handle this cleanly, request the GPIO temporarily
+	 * to avoid conflicts.
+	 */
+	priv->rstb_gpio = gpiod_get_optional(&client->dev, "reset",
+					     GPIOD_OUT_LOW);
+	if (IS_ERR(priv->rstb_gpio)) {
+		dev_info(&client->dev, "Unable to get GPIO \"reset\"");
+		clk_disable_unprepare(priv->clk);
+		return PTR_ERR(priv->rstb_gpio);
+	}
+
+	if (priv->rstb_gpio) {
+		gpiod_set_value(priv->rstb_gpio, 1);
+		usleep_range(500, 1000);
+		gpiod_set_value(priv->rstb_gpio, 0);
+		usleep_range(500, 1000);
+
+		gpiod_put(priv->rstb_gpio);
+	}
+
+	return 0;
+}
+
+static int ov772x_power_off(struct ov772x_priv *priv)
+{
+	clk_disable_unprepare(priv->clk);
+
+	if (priv->pwdn_gpio) {
+		gpiod_set_value(priv->pwdn_gpio, 0);
+		usleep_range(500, 1000);
+	}
+
+	return 0;
+}
+
+static int ov772x_set_params(struct ov772x_priv *priv,
+			     const struct ov772x_color_format *cfmt,
+			     const struct ov772x_win_size *win);
+
+static int ov772x_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct ov772x_priv *priv = to_ov772x(sd);
+	int ret = 0;
+
+	mutex_lock(&priv->lock);
+
+	/* If the power count is modified from 0 to != 0 or from != 0 to 0,
+	 * update the power state.
+	 */
+	if (priv->power_count == !on) {
+		if (on) {
+			ret = ov772x_power_on(priv);
+			/*
+			 * Restore the format, the frame rate, and
+			 * the controls
+			 */
+			if (!ret)
+				ret = ov772x_set_params(priv, priv->cfmt,
+							priv->win);
+		} else {
+			ret = ov772x_power_off(priv);
+		}
+	}
+
+	if (!ret) {
+		/* Update the power count. */
+		priv->power_count += on ? 1 : -1;
+		WARN(priv->power_count < 0, "Unbalanced power count\n");
+		WARN(priv->power_count > 1, "Duplicated s_power call\n");
+	}
+
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static const struct ov772x_win_size *ov772x_select_win(u32 width, u32 height)
+{
+	const struct ov772x_win_size *win = &ov772x_win_sizes[0];
+	u32 best_diff = UINT_MAX;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(ov772x_win_sizes); ++i) {
+		u32 diff = abs(width - ov772x_win_sizes[i].rect.width)
+			 + abs(height - ov772x_win_sizes[i].rect.height);
+		if (diff < best_diff) {
+			best_diff = diff;
+			win = &ov772x_win_sizes[i];
+		}
+	}
+
+	return win;
+}
+
+static void ov772x_select_params(const struct v4l2_mbus_framefmt *mf,
+				 const struct ov772x_color_format **cfmt,
+				 const struct ov772x_win_size **win)
+{
+	unsigned int i;
+
+	/* Select a format. */
+	*cfmt = &ov772x_cfmts[0];
+
+	for (i = 0; i < ARRAY_SIZE(ov772x_cfmts); i++) {
+		if (mf->code == ov772x_cfmts[i].code) {
+			*cfmt = &ov772x_cfmts[i];
+			break;
+		}
+	}
+
+	/* Select a window size. */
+	*win = ov772x_select_win(mf->width, mf->height);
+}
+
+static int ov772x_edgectrl(struct ov772x_priv *priv)
+{
+	struct regmap *regmap = priv->regmap;
+	int ret;
+
+	if (!priv->info)
+		return 0;
+
+	if (priv->info->edgectrl.strength & OV772X_MANUAL_EDGE_CTRL) {
+		/*
+		 * Manual Edge Control Mode.
+		 *
+		 * Edge auto strength bit is set by default.
+		 * Remove it when manual mode.
+		 */
+
+		ret = regmap_update_bits(regmap, DSPAUTO, EDGE_ACTRL, 0x00);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_update_bits(regmap, EDGE_TRSHLD,
+					 OV772X_EDGE_THRESHOLD_MASK,
+					 priv->info->edgectrl.threshold);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_update_bits(regmap, EDGE_STRNGT,
+					 OV772X_EDGE_STRENGTH_MASK,
+					 priv->info->edgectrl.strength);
+		if (ret < 0)
+			return ret;
+
+	} else if (priv->info->edgectrl.upper > priv->info->edgectrl.lower) {
+		/*
+		 * Auto Edge Control Mode.
+		 *
+		 * Set upper and lower limit.
+		 */
+		ret = regmap_update_bits(regmap, EDGE_UPPER,
+					 OV772X_EDGE_UPPER_MASK,
+					 priv->info->edgectrl.upper);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_update_bits(regmap, EDGE_LOWER,
+					 OV772X_EDGE_LOWER_MASK,
+					 priv->info->edgectrl.lower);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int ov772x_set_params(struct ov772x_priv *priv,
+			     const struct ov772x_color_format *cfmt,
+			     const struct ov772x_win_size *win)
+{
+	int ret;
+	u8  val;
+
+	/* Reset hardware. */
+	ov772x_reset(priv);
+
+	/* Edge Ctrl. */
+	ret = ov772x_edgectrl(priv);
+	if (ret < 0)
+		return ret;
+
+	/* Format and window size. */
+	ret = regmap_write(priv->regmap, HSTART, win->rect.left >> 2);
+	if (ret < 0)
+		goto ov772x_set_fmt_error;
+	ret = regmap_write(priv->regmap, HSIZE, win->rect.width >> 2);
+	if (ret < 0)
+		goto ov772x_set_fmt_error;
+	ret = regmap_write(priv->regmap, VSTART, win->rect.top >> 1);
+	if (ret < 0)
+		goto ov772x_set_fmt_error;
+	ret = regmap_write(priv->regmap, VSIZE, win->rect.height >> 1);
+	if (ret < 0)
+		goto ov772x_set_fmt_error;
+	ret = regmap_write(priv->regmap, HOUTSIZE, win->rect.width >> 2);
+	if (ret < 0)
+		goto ov772x_set_fmt_error;
+	ret = regmap_write(priv->regmap, VOUTSIZE, win->rect.height >> 1);
+	if (ret < 0)
+		goto ov772x_set_fmt_error;
+	ret = regmap_write(priv->regmap, HREF,
+			   ((win->rect.top & 1) << HREF_VSTART_SHIFT) |
+			   ((win->rect.left & 3) << HREF_HSTART_SHIFT) |
+			   ((win->rect.height & 1) << HREF_VSIZE_SHIFT) |
+			   ((win->rect.width & 3) << HREF_HSIZE_SHIFT));
+	if (ret < 0)
+		goto ov772x_set_fmt_error;
+	ret = regmap_write(priv->regmap, EXHCH,
+			   ((win->rect.height & 1) << EXHCH_VSIZE_SHIFT) |
+			   ((win->rect.width & 3) << EXHCH_HSIZE_SHIFT));
+	if (ret < 0)
+		goto ov772x_set_fmt_error;
+
+	/* Set DSP_CTRL3. */
+	val = cfmt->dsp3;
+	if (val) {
+		ret = regmap_update_bits(priv->regmap, DSP_CTRL3, UV_MASK, val);
+		if (ret < 0)
+			goto ov772x_set_fmt_error;
+	}
+
+	/* DSP_CTRL4: AEC reference point and DSP output format. */
+	if (cfmt->dsp4) {
+		ret = regmap_write(priv->regmap, DSP_CTRL4, cfmt->dsp4);
+		if (ret < 0)
+			goto ov772x_set_fmt_error;
+	}
+
+	/* Set COM3. */
+	val = cfmt->com3;
+	if (priv->info && (priv->info->flags & OV772X_FLAG_VFLIP))
+		val |= VFLIP_IMG;
+	if (priv->info && (priv->info->flags & OV772X_FLAG_HFLIP))
+		val |= HFLIP_IMG;
+	if (priv->vflip_ctrl->val)
+		val ^= VFLIP_IMG;
+	if (priv->hflip_ctrl->val)
+		val ^= HFLIP_IMG;
+	if (priv->test_pattern)
+		val |= SCOLOR_TEST;
+
+	ret = regmap_update_bits(priv->regmap, COM3, SWAP_MASK | IMG_MASK, val);
+	if (ret < 0)
+		goto ov772x_set_fmt_error;
+
+	/* COM7: Sensor resolution and output format control. */
+	ret = regmap_write(priv->regmap, COM7, win->com7_bit | cfmt->com7);
+	if (ret < 0)
+		goto ov772x_set_fmt_error;
+
+	/* COM4, CLKRC: Set pixel clock and framerate. */
+	ret = ov772x_set_frame_rate(priv, priv->fps, cfmt, win);
+	if (ret < 0)
+		goto ov772x_set_fmt_error;
+
+	/* Set COM8. */
+	if (priv->band_filter_ctrl->val) {
+		unsigned short band_filter = priv->band_filter_ctrl->val;
+
+		ret = regmap_update_bits(priv->regmap, COM8,
+					 BNDF_ON_OFF, BNDF_ON_OFF);
+		if (!ret)
+			ret = regmap_update_bits(priv->regmap, BDBASE,
+						 0xff, 256 - band_filter);
+		if (ret < 0)
+			goto ov772x_set_fmt_error;
+	}
+
+	return ret;
+
+ov772x_set_fmt_error:
+
+	ov772x_reset(priv);
+
+	return ret;
+}
+
+static int ov772x_get_selection(struct v4l2_subdev *sd,
+				struct v4l2_subdev_state *sd_state,
+				struct v4l2_subdev_selection *sel)
+{
+	struct ov772x_priv *priv = to_ov772x(sd);
+
+	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
+		return -EINVAL;
+
+	sel->r.left = 0;
+	sel->r.top = 0;
+	switch (sel->target) {
+	case V4L2_SEL_TGT_CROP_BOUNDS:
+	case V4L2_SEL_TGT_CROP:
+		sel->r.width = priv->win->rect.width;
+		sel->r.height = priv->win->rect.height;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ov772x_get_fmt(struct v4l2_subdev *sd,
+			  struct v4l2_subdev_state *sd_state,
+			  struct v4l2_subdev_format *format)
+{
+	struct v4l2_mbus_framefmt *mf = &format->format;
+	struct ov772x_priv *priv = to_ov772x(sd);
+
+	if (format->pad)
+		return -EINVAL;
+
+	mf->width	= priv->win->rect.width;
+	mf->height	= priv->win->rect.height;
+	mf->code	= priv->cfmt->code;
+	mf->colorspace	= priv->cfmt->colorspace;
+	mf->field	= V4L2_FIELD_NONE;
+
+	return 0;
+}
+
+static int ov772x_set_fmt(struct v4l2_subdev *sd,
+			  struct v4l2_subdev_state *sd_state,
+			  struct v4l2_subdev_format *format)
+{
+	struct ov772x_priv *priv = to_ov772x(sd);
+	struct v4l2_mbus_framefmt *mf = &format->format;
+	const struct ov772x_color_format *cfmt;
+	const struct ov772x_win_size *win;
+	int ret = 0;
+
+	if (format->pad)
+		return -EINVAL;
+
+	ov772x_select_params(mf, &cfmt, &win);
+
+	mf->code = cfmt->code;
+	mf->width = win->rect.width;
+	mf->height = win->rect.height;
+	mf->field = V4L2_FIELD_NONE;
+	mf->colorspace = cfmt->colorspace;
+	mf->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
+	mf->quantization = V4L2_QUANTIZATION_DEFAULT;
+	mf->xfer_func = V4L2_XFER_FUNC_DEFAULT;
+
+	if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+		sd_state->pads->try_fmt = *mf;
+		return 0;
+	}
+
+	mutex_lock(&priv->lock);
+
+	if (priv->streaming) {
+		ret = -EBUSY;
+		goto error;
+	}
+
+	/*
+	 * If the device is not powered up by the host driver do
+	 * not apply any changes to H/W at this time. Instead
+	 * the format will be restored right after power-up.
+	 */
+	if (priv->power_count > 0) {
+		ret = ov772x_set_params(priv, cfmt, win);
+		if (ret < 0)
+			goto error;
+	}
+	priv->win = win;
+	priv->cfmt = cfmt;
+
+error:
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static int ov772x_video_probe(struct ov772x_priv *priv)
+{
+	struct i2c_client  *client = v4l2_get_subdevdata(&priv->subdev);
+	int		    pid, ver, midh, midl;
+	const char         *devname;
+	int		    ret;
+
+	ret = ov772x_power_on(priv);
+	if (ret < 0)
+		return ret;
+
+	/* Check and show product ID and manufacturer ID. */
+	ret = regmap_read(priv->regmap, PID, &pid);
+	if (ret < 0)
+		return ret;
+	ret = regmap_read(priv->regmap, VER, &ver);
+	if (ret < 0)
+		return ret;
+
+	switch (VERSION(pid, ver)) {
+	case OV7720:
+		devname     = "ov7720";
+		break;
+	case OV7725:
+		devname     = "ov7725";
+		break;
+	default:
+		dev_err(&client->dev,
+			"Product ID error %x:%x\n", pid, ver);
+		ret = -ENODEV;
+		goto done;
+	}
+
+	ret = regmap_read(priv->regmap, MIDH, &midh);
+	if (ret < 0)
+		return ret;
+	ret = regmap_read(priv->regmap, MIDL, &midl);
+	if (ret < 0)
+		return ret;
+
+	dev_info(&client->dev,
+		 "%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
+		 devname, pid, ver, midh, midl);
+
+	ret = v4l2_ctrl_handler_setup(&priv->hdl);
+
+done:
+	ov772x_power_off(priv);
+
+	return ret;
+}
+
+static const struct v4l2_ctrl_ops ov772x_ctrl_ops = {
+	.s_ctrl = ov772x_s_ctrl,
+};
+
+static const struct v4l2_subdev_core_ops ov772x_subdev_core_ops = {
+	.log_status = v4l2_ctrl_subdev_log_status,
+	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
+	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register	= ov772x_g_register,
+	.s_register	= ov772x_s_register,
+#endif
+	.s_power	= ov772x_s_power,
+};
+
+static int ov772x_enum_frame_interval(struct v4l2_subdev *sd,
+				      struct v4l2_subdev_state *sd_state,
+				      struct v4l2_subdev_frame_interval_enum *fie)
+{
+	if (fie->pad || fie->index >= ARRAY_SIZE(ov772x_frame_intervals))
+		return -EINVAL;
+
+	if (fie->width != VGA_WIDTH && fie->width != QVGA_WIDTH)
+		return -EINVAL;
+	if (fie->height != VGA_HEIGHT && fie->height != QVGA_HEIGHT)
+		return -EINVAL;
+
+	fie->interval.numerator = 1;
+	fie->interval.denominator = ov772x_frame_intervals[fie->index];
+
+	return 0;
+}
+
+static int ov772x_enum_mbus_code(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_state *sd_state,
+				 struct v4l2_subdev_mbus_code_enum *code)
+{
+	if (code->pad || code->index >= ARRAY_SIZE(ov772x_cfmts))
+		return -EINVAL;
+
+	code->code = ov772x_cfmts[code->index].code;
+
+	return 0;
+}
+
+static const struct v4l2_subdev_video_ops ov772x_subdev_video_ops = {
+	.s_stream		= ov772x_s_stream,
+	.s_frame_interval	= ov772x_s_frame_interval,
+	.g_frame_interval	= ov772x_g_frame_interval,
+};
+
+static const struct v4l2_subdev_pad_ops ov772x_subdev_pad_ops = {
+	.enum_frame_interval	= ov772x_enum_frame_interval,
+	.enum_mbus_code		= ov772x_enum_mbus_code,
+	.get_selection		= ov772x_get_selection,
+	.get_fmt		= ov772x_get_fmt,
+	.set_fmt		= ov772x_set_fmt,
+};
+
+static const struct v4l2_subdev_ops ov772x_subdev_ops = {
+	.core	= &ov772x_subdev_core_ops,
+	.video	= &ov772x_subdev_video_ops,
+	.pad	= &ov772x_subdev_pad_ops,
+};
+
+static int ov772x_parse_dt(struct i2c_client *client,
+			   struct ov772x_priv *priv)
+{
+	struct v4l2_fwnode_endpoint bus_cfg = {
+		.bus_type = V4L2_MBUS_PARALLEL
+	};
+	struct fwnode_handle *ep;
+	int ret;
+
+	ep = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev), NULL);
+	if (!ep) {
+		dev_err(&client->dev, "Endpoint node not found\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * For backward compatibility with older DTS where the
+	 * bus-type property was not mandatory, assume
+	 * V4L2_MBUS_PARALLEL as it was the only supported bus at the
+	 * time. v4l2_fwnode_endpoint_alloc_parse() will not fail if
+	 * 'bus-type' is not specified.
+	 */
+	ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
+	if (ret) {
+		bus_cfg = (struct v4l2_fwnode_endpoint)
+			  { .bus_type = V4L2_MBUS_BT656 };
+		ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
+		if (ret)
+			goto error_fwnode_put;
+	}
+
+	priv->bus_type = bus_cfg.bus_type;
+	v4l2_fwnode_endpoint_free(&bus_cfg);
+
+error_fwnode_put:
+	fwnode_handle_put(ep);
+
+	return ret;
+}
+
+/*
+ * i2c_driver function
+ */
+
+static int ov772x_probe(struct i2c_client *client)
+{
+	struct ov772x_priv	*priv;
+	int			ret;
+	static const struct regmap_config ov772x_regmap_config = {
+		.reg_bits = 8,
+		.val_bits = 8,
+		.max_register = DSPAUTO,
+	};
+
+	if (!client->dev.of_node && !client->dev.platform_data) {
+		dev_err(&client->dev,
+			"Missing ov772x platform data for non-DT device\n");
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regmap = devm_regmap_init_sccb(client, &ov772x_regmap_config);
+	if (IS_ERR(priv->regmap)) {
+		dev_err(&client->dev, "Failed to allocate register map\n");
+		return PTR_ERR(priv->regmap);
+	}
+
+	priv->info = client->dev.platform_data;
+	mutex_init(&priv->lock);
+
+	v4l2_i2c_subdev_init(&priv->subdev, client, &ov772x_subdev_ops);
+	priv->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
+			      V4L2_SUBDEV_FL_HAS_EVENTS;
+	v4l2_ctrl_handler_init(&priv->hdl, 3);
+	/* Use our mutex for the controls */
+	priv->hdl.lock = &priv->lock;
+	priv->vflip_ctrl = v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
+					     V4L2_CID_VFLIP, 0, 1, 1, 0);
+	priv->hflip_ctrl = v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
+					     V4L2_CID_HFLIP, 0, 1, 1, 0);
+	priv->band_filter_ctrl = v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
+						   V4L2_CID_BAND_STOP_FILTER,
+						   0, 256, 1, 0);
+	v4l2_ctrl_new_std_menu_items(&priv->hdl, &ov772x_ctrl_ops,
+				     V4L2_CID_TEST_PATTERN,
+				     ARRAY_SIZE(ov772x_test_pattern_menu) - 1,
+				     0, 0, ov772x_test_pattern_menu);
+	priv->subdev.ctrl_handler = &priv->hdl;
+	if (priv->hdl.error) {
+		ret = priv->hdl.error;
+		goto error_ctrl_free;
+	}
+
+	priv->clk = clk_get(&client->dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		dev_err(&client->dev, "Unable to get xclk clock\n");
+		ret = PTR_ERR(priv->clk);
+		goto error_ctrl_free;
+	}
+
+	priv->pwdn_gpio = gpiod_get_optional(&client->dev, "powerdown",
+					     GPIOD_OUT_LOW);
+	if (IS_ERR(priv->pwdn_gpio)) {
+		dev_info(&client->dev, "Unable to get GPIO \"powerdown\"");
+		ret = PTR_ERR(priv->pwdn_gpio);
+		goto error_clk_put;
+	}
+
+	ret = ov772x_parse_dt(client, priv);
+	if (ret)
+		goto error_clk_put;
+
+	ret = ov772x_video_probe(priv);
+	if (ret < 0)
+		goto error_gpio_put;
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+	priv->pad.flags = MEDIA_PAD_FL_SOURCE;
+	priv->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR;
+	ret = media_entity_pads_init(&priv->subdev.entity, 1, &priv->pad);
+	if (ret < 0)
+		goto error_gpio_put;
+#endif
+
+	priv->cfmt = &ov772x_cfmts[0];
+	priv->win = &ov772x_win_sizes[0];
+	priv->fps = 15;
+
+	ret = v4l2_async_register_subdev(&priv->subdev);
+	if (ret)
+		goto error_entity_cleanup;
+
+	return 0;
+
+error_entity_cleanup:
+	media_entity_cleanup(&priv->subdev.entity);
+error_gpio_put:
+	if (priv->pwdn_gpio)
+		gpiod_put(priv->pwdn_gpio);
+error_clk_put:
+	clk_put(priv->clk);
+error_ctrl_free:
+	v4l2_ctrl_handler_free(&priv->hdl);
+	mutex_destroy(&priv->lock);
+
+	return ret;
+}
+
+static void ov772x_remove(struct i2c_client *client)
+{
+	struct ov772x_priv *priv = to_ov772x(i2c_get_clientdata(client));
+
+	media_entity_cleanup(&priv->subdev.entity);
+	clk_put(priv->clk);
+	if (priv->pwdn_gpio)
+		gpiod_put(priv->pwdn_gpio);
+	v4l2_async_unregister_subdev(&priv->subdev);
+	v4l2_ctrl_handler_free(&priv->hdl);
+	mutex_destroy(&priv->lock);
+}
+
+static const struct i2c_device_id ov772x_id[] = {
+	{ "ov772x", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ov772x_id);
+
+static const struct of_device_id ov772x_of_match[] = {
+	{ .compatible = "ovti,ov7725", },
+	{ .compatible = "ovti,ov7720", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ov772x_of_match);
+
+static struct i2c_driver ov772x_i2c_driver = {
+	.driver = {
+		.name = "ov772x",
+		.of_match_table = ov772x_of_match,
+	},
+	.probe_new = ov772x_probe,
+	.remove   = ov772x_remove,
+	.id_table = ov772x_id,
+};
+
+module_i2c_driver(ov772x_i2c_driver);
+
+MODULE_DESCRIPTION("V4L2 driver for OV772x image sensor");
+MODULE_AUTHOR("Kuninori Morimoto");
+MODULE_LICENSE("GPL v2");