Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 286 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb-v2/ce6230.c b/drivers/media/usb/dvb-usb-v2/ce6230.c
new file mode 100644
index 000000000..d3b5cb4a2
--- /dev/null
+++ b/drivers/media/usb/dvb-usb-v2/ce6230.c
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Intel CE6230 DVB USB driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ */
+
+#include "ce6230.h"
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static int ce6230_ctrl_msg(struct dvb_usb_device *d, struct usb_req *req)
+{
+	int ret;
+	unsigned int pipe;
+	u8 request;
+	u8 requesttype;
+	u16 value;
+	u16 index;
+	u8 *buf;
+
+	request = req->cmd;
+	value = req->value;
+	index = req->index;
+
+	switch (req->cmd) {
+	case I2C_READ:
+	case DEMOD_READ:
+	case REG_READ:
+		requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
+		break;
+	case I2C_WRITE:
+	case DEMOD_WRITE:
+	case REG_WRITE:
+		requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
+		break;
+	default:
+		dev_err(&d->udev->dev, "%s: unknown command=%02x\n",
+				KBUILD_MODNAME, req->cmd);
+		ret = -EINVAL;
+		goto error;
+	}
+
+	buf = kmalloc(req->data_len, GFP_KERNEL);
+	if (!buf) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) {
+		/* write */
+		memcpy(buf, req->data, req->data_len);
+		pipe = usb_sndctrlpipe(d->udev, 0);
+	} else {
+		/* read */
+		pipe = usb_rcvctrlpipe(d->udev, 0);
+	}
+
+	msleep(1); /* avoid I2C errors */
+
+	ret = usb_control_msg(d->udev, pipe, request, requesttype, value, index,
+			buf, req->data_len, CE6230_USB_TIMEOUT);
+
+	dvb_usb_dbg_usb_control_msg(d->udev, request, requesttype, value, index,
+			buf, req->data_len);
+
+	if (ret < 0)
+		dev_err(&d->udev->dev, "%s: usb_control_msg() failed=%d\n",
+				KBUILD_MODNAME, ret);
+	else
+		ret = 0;
+
+	/* read request, copy returned data to return buf */
+	if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
+		memcpy(req->data, buf, req->data_len);
+
+	kfree(buf);
+error:
+	return ret;
+}
+
+/* I2C */
+static struct zl10353_config ce6230_zl10353_config;
+
+static int ce6230_i2c_master_xfer(struct i2c_adapter *adap,
+		struct i2c_msg msg[], int num)
+{
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	int ret = 0, i = 0;
+	struct usb_req req;
+
+	if (num > 2)
+		return -EOPNOTSUPP;
+
+	memset(&req, 0, sizeof(req));
+
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	while (i < num) {
+		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
+			if (msg[i].addr ==
+				ce6230_zl10353_config.demod_address) {
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
+				req.cmd = DEMOD_READ;
+				req.value = msg[i].addr >> 1;
+				req.index = msg[i].buf[0];
+				req.data_len = msg[i+1].len;
+				req.data = &msg[i+1].buf[0];
+				ret = ce6230_ctrl_msg(d, &req);
+			} else {
+				dev_err(&d->udev->dev, "%s: I2C read not " \
+						"implemented\n",
+						KBUILD_MODNAME);
+				ret = -EOPNOTSUPP;
+			}
+			i += 2;
+		} else {
+			if (msg[i].addr ==
+				ce6230_zl10353_config.demod_address) {
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
+				req.cmd = DEMOD_WRITE;
+				req.value = msg[i].addr >> 1;
+				req.index = msg[i].buf[0];
+				req.data_len = msg[i].len-1;
+				req.data = &msg[i].buf[1];
+				ret = ce6230_ctrl_msg(d, &req);
+			} else {
+				req.cmd = I2C_WRITE;
+				req.value = 0x2000 + (msg[i].addr >> 1);
+				req.index = 0x0000;
+				req.data_len = msg[i].len;
+				req.data = &msg[i].buf[0];
+				ret = ce6230_ctrl_msg(d, &req);
+			}
+			i += 1;
+		}
+		if (ret)
+			break;
+	}
+
+	mutex_unlock(&d->i2c_mutex);
+	return ret ? ret : i;
+}
+
+static u32 ce6230_i2c_functionality(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm ce6230_i2c_algorithm = {
+	.master_xfer   = ce6230_i2c_master_xfer,
+	.functionality = ce6230_i2c_functionality,
+};
+
+/* Callbacks for DVB USB */
+static struct zl10353_config ce6230_zl10353_config = {
+	.demod_address = 0x1e,
+	.adc_clock = 450000,
+	.if2 = 45700,
+	.no_tuner = 1,
+	.parallel_ts = 1,
+	.clock_ctl_1 = 0x34,
+	.pll_0 = 0x0e,
+};
+
+static int ce6230_zl10353_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dvb_usb_device *d = adap_to_d(adap);
+
+	dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+	adap->fe[0] = dvb_attach(zl10353_attach, &ce6230_zl10353_config,
+			&d->i2c_adap);
+	if (adap->fe[0] == NULL)
+		return -ENODEV;
+
+	return 0;
+}
+
+static struct mxl5005s_config ce6230_mxl5003s_config = {
+	.i2c_address     = 0xc6,
+	.if_freq         = IF_FREQ_4570000HZ,
+	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
+	.agc_mode        = MXL_SINGLE_AGC,
+	.tracking_filter = MXL_TF_DEFAULT,
+	.rssi_enable     = MXL_RSSI_ENABLE,
+	.cap_select      = MXL_CAP_SEL_ENABLE,
+	.div_out         = MXL_DIV_OUT_4,
+	.clock_out       = MXL_CLOCK_OUT_DISABLE,
+	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+	.top		 = MXL5005S_TOP_25P2,
+	.mod_mode        = MXL_DIGITAL_MODE,
+	.if_mode         = MXL_ZERO_IF,
+	.AgcMasterByte   = 0x00,
+};
+
+static int ce6230_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dvb_usb_device *d = adap_to_d(adap);
+	int ret;
+
+	dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+	ret = dvb_attach(mxl5005s_attach, adap->fe[0], &d->i2c_adap,
+			&ce6230_mxl5003s_config) == NULL ? -ENODEV : 0;
+	return ret;
+}
+
+static int ce6230_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	int ret;
+
+	dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
+
+	/* InterfaceNumber 1 / AlternateSetting 0     idle
+	   InterfaceNumber 1 / AlternateSetting 1     streaming */
+	ret = usb_set_interface(d->udev, 1, onoff);
+	if (ret)
+		dev_err(&d->udev->dev, "%s: usb_set_interface() failed=%d\n",
+				KBUILD_MODNAME, ret);
+
+	return ret;
+}
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties ce6230_props = {
+	.driver_name = KBUILD_MODNAME,
+	.owner = THIS_MODULE,
+	.adapter_nr = adapter_nr,
+	.bInterfaceNumber = 1,
+
+	.i2c_algo = &ce6230_i2c_algorithm,
+	.power_ctrl = ce6230_power_ctrl,
+	.frontend_attach = ce6230_zl10353_frontend_attach,
+	.tuner_attach = ce6230_mxl5003s_tuner_attach,
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+			.stream = {
+				.type = USB_BULK,
+				.count = 6,
+				.endpoint = 0x82,
+				.u = {
+					.bulk = {
+						.buffersize = (16 * 512),
+					}
+				}
+			},
+		}
+	},
+};
+
+static const struct usb_device_id ce6230_id_table[] = {
+	{ DVB_USB_DEVICE(USB_VID_INTEL, USB_PID_INTEL_CE9500,
+		&ce6230_props, "Intel CE9500 reference design", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A310,
+		&ce6230_props, "AVerMedia A310 USB 2.0 DVB-T tuner", NULL) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, ce6230_id_table);
+
+static struct usb_driver ce6230_usb_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = ce6230_id_table,
+	.probe = dvb_usbv2_probe,
+	.disconnect = dvb_usbv2_disconnect,
+	.suspend = dvb_usbv2_suspend,
+	.resume = dvb_usbv2_resume,
+	.reset_resume = dvb_usbv2_reset_resume,
+	.no_dynamic_id = 1,
+	.soft_unbind = 1,
+};
+
+module_usb_driver(ce6230_usb_driver);
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("Intel CE6230 driver");
+MODULE_LICENSE("GPL");