Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 284 insertions, 0 deletions

diff --git a/drivers/media/usb/stk1160/stk1160-i2c.c b/drivers/media/usb/stk1160/stk1160-i2c.c
new file mode 100644
index 000000000..9848b783a
--- /dev/null
+++ b/drivers/media/usb/stk1160/stk1160-i2c.c
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * STK1160 driver
+ *
+ * Copyright (C) 2012 Ezequiel Garcia
+ * <elezegarcia--a.t--gmail.com>
+ *
+ * Based on Easycap driver by R.M. Thomas
+ *	Copyright (C) 2010 R.M. Thomas
+ *	<rmthomas--a.t--sciolus.org>
+ */
+
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/i2c.h>
+
+#include "stk1160.h"
+#include "stk1160-reg.h"
+
+static unsigned int i2c_debug;
+module_param(i2c_debug, int, 0644);
+MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
+
+#define dprintk_i2c(fmt, args...)				\
+do {								\
+	if (i2c_debug)						\
+		printk(KERN_DEBUG fmt, ##args);			\
+} while (0)
+
+static int stk1160_i2c_busy_wait(struct stk1160 *dev, u8 wait_bit_mask)
+{
+	unsigned long end;
+	u8 flag;
+
+	/* Wait until read/write finish bit is set */
+	end = jiffies + msecs_to_jiffies(STK1160_I2C_TIMEOUT);
+	while (time_is_after_jiffies(end)) {
+
+		stk1160_read_reg(dev, STK1160_SICTL+1, &flag);
+		/* read/write done? */
+		if (flag & wait_bit_mask)
+			goto done;
+
+		usleep_range(10 * USEC_PER_MSEC, 20 * USEC_PER_MSEC);
+	}
+
+	return -ETIMEDOUT;
+
+done:
+	return 0;
+}
+
+static int stk1160_i2c_write_reg(struct stk1160 *dev, u8 addr,
+		u8 reg, u8 value)
+{
+	int rc;
+
+	/* Set serial device address */
+	rc = stk1160_write_reg(dev, STK1160_SICTL_SDA, addr);
+	if (rc < 0)
+		return rc;
+
+	/* Set i2c device register sub-address */
+	rc = stk1160_write_reg(dev, STK1160_SBUSW_WA, reg);
+	if (rc < 0)
+		return rc;
+
+	/* Set i2c device register value */
+	rc = stk1160_write_reg(dev, STK1160_SBUSW_WD, value);
+	if (rc < 0)
+		return rc;
+
+	/* Start write now */
+	rc = stk1160_write_reg(dev, STK1160_SICTL, 0x01);
+	if (rc < 0)
+		return rc;
+
+	rc = stk1160_i2c_busy_wait(dev, 0x04);
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+
+static int stk1160_i2c_read_reg(struct stk1160 *dev, u8 addr,
+		u8 reg, u8 *value)
+{
+	int rc;
+
+	/* Set serial device address */
+	rc = stk1160_write_reg(dev, STK1160_SICTL_SDA, addr);
+	if (rc < 0)
+		return rc;
+
+	/* Set i2c device register sub-address */
+	rc = stk1160_write_reg(dev, STK1160_SBUSR_RA, reg);
+	if (rc < 0)
+		return rc;
+
+	/* Start read now */
+	rc = stk1160_write_reg(dev, STK1160_SICTL, 0x20);
+	if (rc < 0)
+		return rc;
+
+	rc = stk1160_i2c_busy_wait(dev, 0x01);
+	if (rc < 0)
+		return rc;
+
+	rc = stk1160_read_reg(dev, STK1160_SBUSR_RD, value);
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+
+/*
+ * stk1160_i2c_check_for_device()
+ * check if there is a i2c_device at the supplied address
+ */
+static int stk1160_i2c_check_for_device(struct stk1160 *dev,
+		unsigned char addr)
+{
+	int rc;
+
+	/* Set serial device address */
+	rc = stk1160_write_reg(dev, STK1160_SICTL_SDA, addr);
+	if (rc < 0)
+		return rc;
+
+	/* Set device sub-address, we'll chip version reg */
+	rc = stk1160_write_reg(dev, STK1160_SBUSR_RA, 0x00);
+	if (rc < 0)
+		return rc;
+
+	/* Start read now */
+	rc = stk1160_write_reg(dev, STK1160_SICTL, 0x20);
+	if (rc < 0)
+		return rc;
+
+	rc = stk1160_i2c_busy_wait(dev, 0x01);
+	if (rc < 0)
+		return -ENODEV;
+
+	return 0;
+}
+
+/*
+ * stk1160_i2c_xfer()
+ * the main i2c transfer function
+ */
+static int stk1160_i2c_xfer(struct i2c_adapter *i2c_adap,
+			   struct i2c_msg msgs[], int num)
+{
+	struct stk1160 *dev = i2c_adap->algo_data;
+	int addr, rc, i;
+
+	for (i = 0; i < num; i++) {
+		addr = msgs[i].addr << 1;
+		dprintk_i2c("%s: addr=%x", __func__, addr);
+
+		if (!msgs[i].len) {
+			/* no len: check only for device presence */
+			rc = stk1160_i2c_check_for_device(dev, addr);
+			if (rc < 0) {
+				dprintk_i2c(" no device\n");
+				return rc;
+			}
+
+		} else if (msgs[i].flags & I2C_M_RD) {
+			/* read request without preceding register selection */
+			dprintk_i2c(" subaddr not selected");
+			rc = -EOPNOTSUPP;
+			goto err;
+
+		} else if (i + 1 < num && msgs[i].len <= 2 &&
+			   (msgs[i + 1].flags & I2C_M_RD) &&
+			   msgs[i].addr == msgs[i + 1].addr) {
+
+			if (msgs[i].len != 1 || msgs[i + 1].len != 1) {
+				dprintk_i2c(" len not supported");
+				rc = -EOPNOTSUPP;
+				goto err;
+			}
+
+			dprintk_i2c(" subaddr=%x", msgs[i].buf[0]);
+
+			rc = stk1160_i2c_read_reg(dev, addr, msgs[i].buf[0],
+				msgs[i + 1].buf);
+
+			dprintk_i2c(" read=%x", *msgs[i + 1].buf);
+
+			/* consumed two msgs, so we skip one of them */
+			i++;
+
+		} else {
+			if (msgs[i].len != 2) {
+				dprintk_i2c(" len not supported");
+				rc = -EOPNOTSUPP;
+				goto err;
+			}
+
+			dprintk_i2c(" subaddr=%x write=%x",
+				msgs[i].buf[0],  msgs[i].buf[1]);
+
+			rc = stk1160_i2c_write_reg(dev, addr, msgs[i].buf[0],
+				msgs[i].buf[1]);
+		}
+
+		if (rc < 0)
+			goto err;
+		dprintk_i2c(" OK\n");
+	}
+
+	return num;
+err:
+	dprintk_i2c(" ERROR: %d\n", rc);
+	return num;
+}
+
+/*
+ * functionality(), what da heck is this?
+ */
+static u32 functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm algo = {
+	.master_xfer   = stk1160_i2c_xfer,
+	.functionality = functionality,
+};
+
+static const struct i2c_adapter adap_template = {
+	.owner = THIS_MODULE,
+	.name = "stk1160",
+	.algo = &algo,
+};
+
+static const struct i2c_client client_template = {
+	.name = "stk1160 internal",
+};
+
+/*
+ * stk1160_i2c_register()
+ * register i2c bus
+ */
+int stk1160_i2c_register(struct stk1160 *dev)
+{
+	int rc;
+
+	dev->i2c_adap = adap_template;
+	dev->i2c_adap.dev.parent = dev->dev;
+	strscpy(dev->i2c_adap.name, "stk1160", sizeof(dev->i2c_adap.name));
+	dev->i2c_adap.algo_data = dev;
+
+	i2c_set_adapdata(&dev->i2c_adap, &dev->v4l2_dev);
+
+	rc = i2c_add_adapter(&dev->i2c_adap);
+	if (rc < 0) {
+		stk1160_err("cannot add i2c adapter (%d)\n", rc);
+		return rc;
+	}
+
+	dev->i2c_client = client_template;
+	dev->i2c_client.adapter = &dev->i2c_adap;
+
+	/* Set i2c clock divider device address */
+	stk1160_write_reg(dev, STK1160_SICTL_CD,  0x0f);
+
+	/* ??? */
+	stk1160_write_reg(dev, STK1160_ASIC + 3,  0x00);
+
+	return 0;
+}
+
+/*
+ * stk1160_i2c_unregister()
+ * unregister i2c_bus
+ */
+int stk1160_i2c_unregister(struct stk1160 *dev)
+{
+	i2c_del_adapter(&dev->i2c_adap);
+	return 0;
+}