Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 109 insertions, 0 deletions

diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h
new file mode 100644
index 000000000..6de02f09c
--- /dev/null
+++ b/drivers/mmc/host/sdhci-esdhc.h
@@ -0,0 +1,109 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Freescale eSDHC controller driver generics for OF and pltfm.
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2009 MontaVista Software, Inc.
+ * Copyright (c) 2010 Pengutronix e.K.
+ * Copyright 2020 NXP
+ *   Author: Wolfram Sang <kernel@pengutronix.de>
+ */
+
+#ifndef _DRIVERS_MMC_SDHCI_ESDHC_H
+#define _DRIVERS_MMC_SDHCI_ESDHC_H
+
+/*
+ * Ops and quirks for the Freescale eSDHC controller.
+ */
+
+#define ESDHC_DEFAULT_QUIRKS	(SDHCI_QUIRK_FORCE_BLK_SZ_2048 | \
+				SDHCI_QUIRK_32BIT_DMA_ADDR | \
+				SDHCI_QUIRK_NO_BUSY_IRQ | \
+				SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | \
+				SDHCI_QUIRK_PIO_NEEDS_DELAY | \
+				SDHCI_QUIRK_NO_HISPD_BIT)
+
+/* pltfm-specific */
+#define ESDHC_HOST_CONTROL_LE	0x20
+
+/*
+ * eSDHC register definition
+ */
+
+/* Present State Register */
+#define ESDHC_PRSSTAT			0x24
+#define ESDHC_CLOCK_GATE_OFF		0x00000080
+#define ESDHC_CLOCK_STABLE		0x00000008
+
+/* Protocol Control Register */
+#define ESDHC_PROCTL			0x28
+#define ESDHC_VOLT_SEL			0x00000400
+#define ESDHC_CTRL_4BITBUS		(0x1 << 1)
+#define ESDHC_CTRL_8BITBUS		(0x2 << 1)
+#define ESDHC_CTRL_BUSWIDTH_MASK	(0x3 << 1)
+#define ESDHC_HOST_CONTROL_RES		0x01
+
+/* System Control Register */
+#define ESDHC_SYSTEM_CONTROL		0x2c
+#define ESDHC_CLOCK_MASK		0x0000fff0
+#define ESDHC_PREDIV_SHIFT		8
+#define ESDHC_DIVIDER_SHIFT		4
+#define ESDHC_CLOCK_SDCLKEN		0x00000008
+#define ESDHC_CLOCK_PEREN		0x00000004
+#define ESDHC_CLOCK_HCKEN		0x00000002
+#define ESDHC_CLOCK_IPGEN		0x00000001
+
+/* System Control 2 Register */
+#define ESDHC_SYSTEM_CONTROL_2		0x3c
+#define ESDHC_SMPCLKSEL			0x00800000
+#define ESDHC_EXTN			0x00400000
+
+/* Host Controller Capabilities Register 2 */
+#define ESDHC_CAPABILITIES_1		0x114
+
+/* Tuning Block Control Register */
+#define ESDHC_TBCTL			0x120
+#define ESDHC_HS400_WNDW_ADJUST		0x00000040
+#define ESDHC_HS400_MODE		0x00000010
+#define ESDHC_TB_EN			0x00000004
+#define ESDHC_TB_MODE_MASK		0x00000003
+#define ESDHC_TB_MODE_SW		0x00000003
+#define ESDHC_TB_MODE_3			0x00000002
+
+#define ESDHC_TBSTAT			0x124
+
+#define ESDHC_TBPTR			0x128
+#define ESDHC_WNDW_STRT_PTR_SHIFT	8
+#define ESDHC_WNDW_STRT_PTR_MASK	(0x7f << 8)
+#define ESDHC_WNDW_END_PTR_MASK		0x7f
+
+/* SD Clock Control Register */
+#define ESDHC_SDCLKCTL			0x144
+#define ESDHC_LPBK_CLK_SEL		0x80000000
+#define ESDHC_CMD_CLK_CTL		0x00008000
+
+/* SD Timing Control Register */
+#define ESDHC_SDTIMNGCTL		0x148
+#define ESDHC_FLW_CTL_BG		0x00008000
+
+/* DLL Config 0 Register */
+#define ESDHC_DLLCFG0			0x160
+#define ESDHC_DLL_ENABLE		0x80000000
+#define ESDHC_DLL_RESET			0x40000000
+#define ESDHC_DLL_FREQ_SEL		0x08000000
+
+/* DLL Config 1 Register */
+#define ESDHC_DLLCFG1			0x164
+#define ESDHC_DLL_PD_PULSE_STRETCH_SEL	0x80000000
+
+/* DLL Status 0 Register */
+#define ESDHC_DLLSTAT0			0x170
+#define ESDHC_DLL_STS_SLV_LOCK		0x08000000
+
+/* Control Register for DMA transfer */
+#define ESDHC_DMA_SYSCTL		0x40c
+#define ESDHC_PERIPHERAL_CLK_SEL	0x00080000
+#define ESDHC_FLUSH_ASYNC_FIFO		0x00040000
+#define ESDHC_DMA_SNOOP			0x00000040
+
+#endif /* _DRIVERS_MMC_SDHCI_ESDHC_H */