summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-05-04 10:10:17 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-05-04 10:10:17 +0000
commit9db5397d87fc212863d4750c85ff8b9a6ed42b95 (patch)
tree1bd4e8854203c575eabaa99e2c509f8886065733 /drivers/mmc/host
parentAdding upstream version 6.1.76. (diff)
downloadlinux-9db5397d87fc212863d4750c85ff8b9a6ed42b95.tar.xz
linux-9db5397d87fc212863d4750c85ff8b9a6ed42b95.zip
Adding upstream version 6.1.82.upstream/6.1.82
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/mmc/host')
-rw-r--r--drivers/mmc/host/mmci_stm32_sdmmc.c24
-rw-r--r--drivers/mmc/host/sdhci-pci-o2micro.c30
-rw-r--r--drivers/mmc/host/sdhci-xenon-phy.c48
3 files changed, 93 insertions, 9 deletions
diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c b/drivers/mmc/host/mmci_stm32_sdmmc.c
index 60bca78a7..0511583ff 100644
--- a/drivers/mmc/host/mmci_stm32_sdmmc.c
+++ b/drivers/mmc/host/mmci_stm32_sdmmc.c
@@ -200,6 +200,8 @@ static int sdmmc_idma_start(struct mmci_host *host, unsigned int *datactrl)
struct scatterlist *sg;
int i;
+ host->dma_in_progress = true;
+
if (!host->variant->dma_lli || data->sg_len == 1 ||
idma->use_bounce_buffer) {
u32 dma_addr;
@@ -238,9 +240,30 @@ static int sdmmc_idma_start(struct mmci_host *host, unsigned int *datactrl)
return 0;
}
+static void sdmmc_idma_error(struct mmci_host *host)
+{
+ struct mmc_data *data = host->data;
+ struct sdmmc_idma *idma = host->dma_priv;
+
+ if (!dma_inprogress(host))
+ return;
+
+ writel_relaxed(0, host->base + MMCI_STM32_IDMACTRLR);
+ host->dma_in_progress = false;
+ data->host_cookie = 0;
+
+ if (!idma->use_bounce_buffer)
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+ mmc_get_dma_dir(data));
+}
+
static void sdmmc_idma_finalize(struct mmci_host *host, struct mmc_data *data)
{
+ if (!dma_inprogress(host))
+ return;
+
writel_relaxed(0, host->base + MMCI_STM32_IDMACTRLR);
+ host->dma_in_progress = false;
if (!data->host_cookie)
sdmmc_idma_unprep_data(host, data, 0);
@@ -567,6 +590,7 @@ static struct mmci_host_ops sdmmc_variant_ops = {
.dma_setup = sdmmc_idma_setup,
.dma_start = sdmmc_idma_start,
.dma_finalize = sdmmc_idma_finalize,
+ .dma_error = sdmmc_idma_error,
.set_clkreg = mmci_sdmmc_set_clkreg,
.set_pwrreg = mmci_sdmmc_set_pwrreg,
.busy_complete = sdmmc_busy_complete,
diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
index bca1d095b..24bb0e980 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -602,6 +602,35 @@ static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
sdhci_o2_enable_clk(host, clk);
}
+static void sdhci_pci_o2_set_power(struct sdhci_host *host, unsigned char mode, unsigned short vdd)
+{
+ struct sdhci_pci_chip *chip;
+ struct sdhci_pci_slot *slot = sdhci_priv(host);
+ u32 scratch_32 = 0;
+ u8 scratch_8 = 0;
+
+ chip = slot->chip;
+
+ if (mode == MMC_POWER_OFF) {
+ /* UnLock WP */
+ pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
+ scratch_8 &= 0x7f;
+ pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
+
+ /* Set PCR 0x354[16] to switch Clock Source back to OPE Clock */
+ pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &scratch_32);
+ scratch_32 &= ~(O2_SD_SEL_DLL);
+ pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, scratch_32);
+
+ /* Lock WP */
+ pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
+ scratch_8 |= 0x80;
+ pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
+ }
+
+ sdhci_set_power(host, mode, vdd);
+}
+
static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
{
struct sdhci_pci_chip *chip;
@@ -911,6 +940,7 @@ static const struct sdhci_ops sdhci_pci_o2_ops = {
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
+ .set_power = sdhci_pci_o2_set_power,
};
const struct sdhci_pci_fixes sdhci_o2 = {
diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c
index 8cf3a375d..cc9d28b75 100644
--- a/drivers/mmc/host/sdhci-xenon-phy.c
+++ b/drivers/mmc/host/sdhci-xenon-phy.c
@@ -11,6 +11,7 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/ktime.h>
+#include <linux/iopoll.h>
#include <linux/of_address.h>
#include "sdhci-pltfm.h"
@@ -109,6 +110,8 @@
#define XENON_EMMC_PHY_LOGIC_TIMING_ADJUST (XENON_EMMC_PHY_REG_BASE + 0x18)
#define XENON_LOGIC_TIMING_VALUE 0x00AA8977
+#define XENON_MAX_PHY_TIMEOUT_LOOPS 100
+
/*
* List offset of PHY registers and some special register values
* in eMMC PHY 5.0 or eMMC PHY 5.1
@@ -216,6 +219,19 @@ static int xenon_alloc_emmc_phy(struct sdhci_host *host)
return 0;
}
+static int xenon_check_stability_internal_clk(struct sdhci_host *host)
+{
+ u32 reg;
+ int err;
+
+ err = read_poll_timeout(sdhci_readw, reg, reg & SDHCI_CLOCK_INT_STABLE,
+ 1100, 20000, false, host, SDHCI_CLOCK_CONTROL);
+ if (err)
+ dev_err(mmc_dev(host->mmc), "phy_init: Internal clock never stabilized.\n");
+
+ return err;
+}
+
/*
* eMMC 5.0/5.1 PHY init/re-init.
* eMMC PHY init should be executed after:
@@ -232,6 +248,11 @@ static int xenon_emmc_phy_init(struct sdhci_host *host)
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+ int ret = xenon_check_stability_internal_clk(host);
+
+ if (ret)
+ return ret;
+
reg = sdhci_readl(host, phy_regs->timing_adj);
reg |= XENON_PHY_INITIALIZAION;
sdhci_writel(host, reg, phy_regs->timing_adj);
@@ -259,18 +280,27 @@ static int xenon_emmc_phy_init(struct sdhci_host *host)
/* get the wait time */
wait /= clock;
wait++;
- /* wait for host eMMC PHY init completes */
- udelay(wait);
- reg = sdhci_readl(host, phy_regs->timing_adj);
- reg &= XENON_PHY_INITIALIZAION;
- if (reg) {
+ /*
+ * AC5X spec says bit must be polled until zero.
+ * We see cases in which timeout can take longer
+ * than the standard calculation on AC5X, which is
+ * expected following the spec comment above.
+ * According to the spec, we must wait as long as
+ * it takes for that bit to toggle on AC5X.
+ * Cap that with 100 delay loops so we won't get
+ * stuck here forever:
+ */
+
+ ret = read_poll_timeout(sdhci_readl, reg,
+ !(reg & XENON_PHY_INITIALIZAION),
+ wait, XENON_MAX_PHY_TIMEOUT_LOOPS * wait,
+ false, host, phy_regs->timing_adj);
+ if (ret)
dev_err(mmc_dev(host->mmc), "eMMC PHY init cannot complete after %d us\n",
- wait);
- return -ETIMEDOUT;
- }
+ wait * XENON_MAX_PHY_TIMEOUT_LOOPS);
- return 0;
+ return ret;
}
#define ARMADA_3700_SOC_PAD_1_8V 0x1