Adding upstream version 6.1.82.upstream/6.1.82

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

5 files changed, 100 insertions, 10 deletions

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index a46ce0868..3a927452a 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1007,10 +1007,12 @@ static int mmc_select_bus_width(struct mmc_card *card)
 	static unsigned ext_csd_bits[] = {
 		EXT_CSD_BUS_WIDTH_8,
 		EXT_CSD_BUS_WIDTH_4,
+		EXT_CSD_BUS_WIDTH_1,
 	};
 	static unsigned bus_widths[] = {
 		MMC_BUS_WIDTH_8,
 		MMC_BUS_WIDTH_4,
+		MMC_BUS_WIDTH_1,
 	};
 	struct mmc_host *host = card->host;
 	unsigned idx, bus_width = 0;
diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c
index dd2a4b6ab..e3c69c6b8 100644
--- a/drivers/mmc/core/slot-gpio.c
+++ b/drivers/mmc/core/slot-gpio.c
@@ -62,11 +62,15 @@ int mmc_gpio_alloc(struct mmc_host *host)
 int mmc_gpio_get_ro(struct mmc_host *host)
 {
 	struct mmc_gpio *ctx = host->slot.handler_priv;
+	int cansleep;
 
 	if (!ctx || !ctx->ro_gpio)
 		return -ENOSYS;
 
-	return gpiod_get_value_cansleep(ctx->ro_gpio);
+	cansleep = gpiod_cansleep(ctx->ro_gpio);
+	return cansleep ?
+		gpiod_get_value_cansleep(ctx->ro_gpio) :
+		gpiod_get_value(ctx->ro_gpio);
 }
 EXPORT_SYMBOL(mmc_gpio_get_ro);
 
diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c b/drivers/mmc/host/mmci_stm32_sdmmc.c
index 60bca78a7..0511583ff 100644
--- a/drivers/mmc/host/mmci_stm32_sdmmc.c
+++ b/drivers/mmc/host/mmci_stm32_sdmmc.c
@@ -200,6 +200,8 @@ static int sdmmc_idma_start(struct mmci_host *host, unsigned int *datactrl)
 	struct scatterlist *sg;
 	int i;
 
+	host->dma_in_progress = true;
+
 	if (!host->variant->dma_lli || data->sg_len == 1 ||
 	    idma->use_bounce_buffer) {
 		u32 dma_addr;
@@ -238,9 +240,30 @@ static int sdmmc_idma_start(struct mmci_host *host, unsigned int *datactrl)
 	return 0;
 }
 
+static void sdmmc_idma_error(struct mmci_host *host)
+{
+	struct mmc_data *data = host->data;
+	struct sdmmc_idma *idma = host->dma_priv;
+
+	if (!dma_inprogress(host))
+		return;
+
+	writel_relaxed(0, host->base + MMCI_STM32_IDMACTRLR);
+	host->dma_in_progress = false;
+	data->host_cookie = 0;
+
+	if (!idma->use_bounce_buffer)
+		dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+			     mmc_get_dma_dir(data));
+}
+
 static void sdmmc_idma_finalize(struct mmci_host *host, struct mmc_data *data)
 {
+	if (!dma_inprogress(host))
+		return;
+
 	writel_relaxed(0, host->base + MMCI_STM32_IDMACTRLR);
+	host->dma_in_progress = false;
 
 	if (!data->host_cookie)
 		sdmmc_idma_unprep_data(host, data, 0);
@@ -567,6 +590,7 @@ static struct mmci_host_ops sdmmc_variant_ops = {
 	.dma_setup = sdmmc_idma_setup,
 	.dma_start = sdmmc_idma_start,
 	.dma_finalize = sdmmc_idma_finalize,
+	.dma_error = sdmmc_idma_error,
 	.set_clkreg = mmci_sdmmc_set_clkreg,
 	.set_pwrreg = mmci_sdmmc_set_pwrreg,
 	.busy_complete = sdmmc_busy_complete,
diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
index bca1d095b..24bb0e980 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -602,6 +602,35 @@ static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
 	sdhci_o2_enable_clk(host, clk);
 }
 
+static void sdhci_pci_o2_set_power(struct sdhci_host *host, unsigned char mode,  unsigned short vdd)
+{
+	struct sdhci_pci_chip *chip;
+	struct sdhci_pci_slot *slot = sdhci_priv(host);
+	u32 scratch_32 = 0;
+	u8 scratch_8 = 0;
+
+	chip = slot->chip;
+
+	if (mode == MMC_POWER_OFF) {
+		/* UnLock WP */
+		pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
+		scratch_8 &= 0x7f;
+		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
+
+		/* Set PCR 0x354[16] to switch Clock Source back to OPE Clock */
+		pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &scratch_32);
+		scratch_32 &= ~(O2_SD_SEL_DLL);
+		pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, scratch_32);
+
+		/* Lock WP */
+		pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
+		scratch_8 |= 0x80;
+		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
+	}
+
+	sdhci_set_power(host, mode, vdd);
+}
+
 static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
 {
 	struct sdhci_pci_chip *chip;
@@ -911,6 +940,7 @@ static const struct sdhci_ops sdhci_pci_o2_ops = {
 	.set_bus_width = sdhci_set_bus_width,
 	.reset = sdhci_reset,
 	.set_uhs_signaling = sdhci_set_uhs_signaling,
+	.set_power = sdhci_pci_o2_set_power,
 };
 
 const struct sdhci_pci_fixes sdhci_o2 = {
diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c
index 8cf3a375d..cc9d28b75 100644
--- a/drivers/mmc/host/sdhci-xenon-phy.c
+++ b/drivers/mmc/host/sdhci-xenon-phy.c
@@ -11,6 +11,7 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/ktime.h>
+#include <linux/iopoll.h>
 #include <linux/of_address.h>
 
 #include "sdhci-pltfm.h"
@@ -109,6 +110,8 @@
 #define XENON_EMMC_PHY_LOGIC_TIMING_ADJUST	(XENON_EMMC_PHY_REG_BASE + 0x18)
 #define XENON_LOGIC_TIMING_VALUE		0x00AA8977
 
+#define XENON_MAX_PHY_TIMEOUT_LOOPS		100
+
 /*
  * List offset of PHY registers and some special register values
  * in eMMC PHY 5.0 or eMMC PHY 5.1
@@ -216,6 +219,19 @@ static int xenon_alloc_emmc_phy(struct sdhci_host *host)
 	return 0;
 }
 
+static int xenon_check_stability_internal_clk(struct sdhci_host *host)
+{
+	u32 reg;
+	int err;
+
+	err = read_poll_timeout(sdhci_readw, reg, reg & SDHCI_CLOCK_INT_STABLE,
+				1100, 20000, false, host, SDHCI_CLOCK_CONTROL);
+	if (err)
+		dev_err(mmc_dev(host->mmc), "phy_init: Internal clock never stabilized.\n");
+
+	return err;
+}
+
 /*
  * eMMC 5.0/5.1 PHY init/re-init.
  * eMMC PHY init should be executed after:
@@ -232,6 +248,11 @@ static int xenon_emmc_phy_init(struct sdhci_host *host)
 	struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
 	struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
 
+	int ret = xenon_check_stability_internal_clk(host);
+
+	if (ret)
+		return ret;
+
 	reg = sdhci_readl(host, phy_regs->timing_adj);
 	reg |= XENON_PHY_INITIALIZAION;
 	sdhci_writel(host, reg, phy_regs->timing_adj);
@@ -259,18 +280,27 @@ static int xenon_emmc_phy_init(struct sdhci_host *host)
 	/* get the wait time */
 	wait /= clock;
 	wait++;
-	/* wait for host eMMC PHY init completes */
-	udelay(wait);
 
-	reg = sdhci_readl(host, phy_regs->timing_adj);
-	reg &= XENON_PHY_INITIALIZAION;
-	if (reg) {
+	/*
+	 * AC5X spec says bit must be polled until zero.
+	 * We see cases in which timeout can take longer
+	 * than the standard calculation on AC5X, which is
+	 * expected following the spec comment above.
+	 * According to the spec, we must wait as long as
+	 * it takes for that bit to toggle on AC5X.
+	 * Cap that with 100 delay loops so we won't get
+	 * stuck here forever:
+	 */
+
+	ret = read_poll_timeout(sdhci_readl, reg,
+				!(reg & XENON_PHY_INITIALIZAION),
+				wait, XENON_MAX_PHY_TIMEOUT_LOOPS * wait,
+				false, host, phy_regs->timing_adj);
+	if (ret)
 		dev_err(mmc_dev(host->mmc), "eMMC PHY init cannot complete after %d us\n",
-			wait);
-		return -ETIMEDOUT;
-	}
+			wait * XENON_MAX_PHY_TIMEOUT_LOOPS);
 
-	return 0;
+	return ret;
 }
 
 #define ARMADA_3700_SOC_PAD_1_8V	0x1