Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 699 insertions, 0 deletions

diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
new file mode 100644
index 000000000..aac5956e4
--- /dev/null
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -0,0 +1,699 @@
+/*
+ * sja1000.c -  Philips SJA1000 network device driver
+ *
+ * Copyright (c) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33,
+ * 38106 Braunschweig, GERMANY
+ *
+ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Volkswagen nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Alternatively, provided that this notice is retained in full, this
+ * software may be distributed under the terms of the GNU General
+ * Public License ("GPL") version 2, in which case the provisions of the
+ * GPL apply INSTEAD OF those given above.
+ *
+ * The provided data structures and external interfaces from this code
+ * are not restricted to be used by modules with a GPL compatible license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ethtool.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+
+#include "sja1000.h"
+
+#define DRV_NAME "sja1000"
+
+MODULE_AUTHOR("Oliver Hartkopp <oliver.hartkopp@volkswagen.de>");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_DESCRIPTION(DRV_NAME "CAN netdevice driver");
+
+static const struct can_bittiming_const sja1000_bittiming_const = {
+	.name = DRV_NAME,
+	.tseg1_min = 1,
+	.tseg1_max = 16,
+	.tseg2_min = 1,
+	.tseg2_max = 8,
+	.sjw_max = 4,
+	.brp_min = 1,
+	.brp_max = 64,
+	.brp_inc = 1,
+};
+
+static void sja1000_write_cmdreg(struct sja1000_priv *priv, u8 val)
+{
+	unsigned long flags;
+
+	/*
+	 * The command register needs some locking and time to settle
+	 * the write_reg() operation - especially on SMP systems.
+	 */
+	spin_lock_irqsave(&priv->cmdreg_lock, flags);
+	priv->write_reg(priv, SJA1000_CMR, val);
+	priv->read_reg(priv, SJA1000_SR);
+	spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
+}
+
+static int sja1000_is_absent(struct sja1000_priv *priv)
+{
+	return (priv->read_reg(priv, SJA1000_MOD) == 0xFF);
+}
+
+static int sja1000_probe_chip(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+
+	if (priv->reg_base && sja1000_is_absent(priv)) {
+		netdev_err(dev, "probing failed\n");
+		return 0;
+	}
+	return -1;
+}
+
+static void set_reset_mode(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	unsigned char status = priv->read_reg(priv, SJA1000_MOD);
+	int i;
+
+	/* disable interrupts */
+	priv->write_reg(priv, SJA1000_IER, IRQ_OFF);
+
+	for (i = 0; i < 100; i++) {
+		/* check reset bit */
+		if (status & MOD_RM) {
+			priv->can.state = CAN_STATE_STOPPED;
+			return;
+		}
+
+		/* reset chip */
+		priv->write_reg(priv, SJA1000_MOD, MOD_RM);
+		udelay(10);
+		status = priv->read_reg(priv, SJA1000_MOD);
+	}
+
+	netdev_err(dev, "setting SJA1000 into reset mode failed!\n");
+}
+
+static void set_normal_mode(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	unsigned char status = priv->read_reg(priv, SJA1000_MOD);
+	u8 mod_reg_val = 0x00;
+	int i;
+
+	for (i = 0; i < 100; i++) {
+		/* check reset bit */
+		if ((status & MOD_RM) == 0) {
+			priv->can.state = CAN_STATE_ERROR_ACTIVE;
+			/* enable interrupts */
+			if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
+				priv->write_reg(priv, SJA1000_IER, IRQ_ALL);
+			else
+				priv->write_reg(priv, SJA1000_IER,
+						IRQ_ALL & ~IRQ_BEI);
+			return;
+		}
+
+		/* set chip to normal mode */
+		if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
+			mod_reg_val |= MOD_LOM;
+		if (priv->can.ctrlmode & CAN_CTRLMODE_PRESUME_ACK)
+			mod_reg_val |= MOD_STM;
+		priv->write_reg(priv, SJA1000_MOD, mod_reg_val);
+
+		udelay(10);
+
+		status = priv->read_reg(priv, SJA1000_MOD);
+	}
+
+	netdev_err(dev, "setting SJA1000 into normal mode failed!\n");
+}
+
+/*
+ * initialize SJA1000 chip:
+ *   - reset chip
+ *   - set output mode
+ *   - set baudrate
+ *   - enable interrupts
+ *   - start operating mode
+ */
+static void chipset_init(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+
+	if (!(priv->flags & SJA1000_QUIRK_NO_CDR_REG))
+		/* set clock divider and output control register */
+		priv->write_reg(priv, SJA1000_CDR, priv->cdr | CDR_PELICAN);
+
+	/* set acceptance filter (accept all) */
+	priv->write_reg(priv, SJA1000_ACCC0, 0x00);
+	priv->write_reg(priv, SJA1000_ACCC1, 0x00);
+	priv->write_reg(priv, SJA1000_ACCC2, 0x00);
+	priv->write_reg(priv, SJA1000_ACCC3, 0x00);
+
+	priv->write_reg(priv, SJA1000_ACCM0, 0xFF);
+	priv->write_reg(priv, SJA1000_ACCM1, 0xFF);
+	priv->write_reg(priv, SJA1000_ACCM2, 0xFF);
+	priv->write_reg(priv, SJA1000_ACCM3, 0xFF);
+
+	priv->write_reg(priv, SJA1000_OCR, priv->ocr | OCR_MODE_NORMAL);
+}
+
+static void sja1000_start(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+
+	/* leave reset mode */
+	if (priv->can.state != CAN_STATE_STOPPED)
+		set_reset_mode(dev);
+
+	/* Initialize chip if uninitialized at this stage */
+	if (!(priv->flags & SJA1000_QUIRK_NO_CDR_REG ||
+	      priv->read_reg(priv, SJA1000_CDR) & CDR_PELICAN))
+		chipset_init(dev);
+
+	/* Clear error counters and error code capture */
+	priv->write_reg(priv, SJA1000_TXERR, 0x0);
+	priv->write_reg(priv, SJA1000_RXERR, 0x0);
+	priv->read_reg(priv, SJA1000_ECC);
+
+	/* clear interrupt flags */
+	priv->read_reg(priv, SJA1000_IR);
+
+	/* leave reset mode */
+	set_normal_mode(dev);
+}
+
+static int sja1000_set_mode(struct net_device *dev, enum can_mode mode)
+{
+	switch (mode) {
+	case CAN_MODE_START:
+		sja1000_start(dev);
+		if (netif_queue_stopped(dev))
+			netif_wake_queue(dev);
+		break;
+
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int sja1000_set_bittiming(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct can_bittiming *bt = &priv->can.bittiming;
+	u8 btr0, btr1;
+
+	btr0 = ((bt->brp - 1) & 0x3f) | (((bt->sjw - 1) & 0x3) << 6);
+	btr1 = ((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) |
+		(((bt->phase_seg2 - 1) & 0x7) << 4);
+	if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
+		btr1 |= 0x80;
+
+	netdev_info(dev, "setting BTR0=0x%02x BTR1=0x%02x\n", btr0, btr1);
+
+	priv->write_reg(priv, SJA1000_BTR0, btr0);
+	priv->write_reg(priv, SJA1000_BTR1, btr1);
+
+	return 0;
+}
+
+static int sja1000_get_berr_counter(const struct net_device *dev,
+				    struct can_berr_counter *bec)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+
+	bec->txerr = priv->read_reg(priv, SJA1000_TXERR);
+	bec->rxerr = priv->read_reg(priv, SJA1000_RXERR);
+
+	return 0;
+}
+
+/*
+ * transmit a CAN message
+ * message layout in the sk_buff should be like this:
+ * xx xx xx xx	 ff	 ll   00 11 22 33 44 55 66 77
+ * [  can-id ] [flags] [len] [can data (up to 8 bytes]
+ */
+static netdev_tx_t sja1000_start_xmit(struct sk_buff *skb,
+					    struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct can_frame *cf = (struct can_frame *)skb->data;
+	uint8_t fi;
+	canid_t id;
+	uint8_t dreg;
+	u8 cmd_reg_val = 0x00;
+	int i;
+
+	if (can_dev_dropped_skb(dev, skb))
+		return NETDEV_TX_OK;
+
+	netif_stop_queue(dev);
+
+	fi = can_get_cc_dlc(cf, priv->can.ctrlmode);
+	id = cf->can_id;
+
+	if (id & CAN_RTR_FLAG)
+		fi |= SJA1000_FI_RTR;
+
+	if (id & CAN_EFF_FLAG) {
+		fi |= SJA1000_FI_FF;
+		dreg = SJA1000_EFF_BUF;
+		priv->write_reg(priv, SJA1000_FI, fi);
+		priv->write_reg(priv, SJA1000_ID1, (id & 0x1fe00000) >> 21);
+		priv->write_reg(priv, SJA1000_ID2, (id & 0x001fe000) >> 13);
+		priv->write_reg(priv, SJA1000_ID3, (id & 0x00001fe0) >> 5);
+		priv->write_reg(priv, SJA1000_ID4, (id & 0x0000001f) << 3);
+	} else {
+		dreg = SJA1000_SFF_BUF;
+		priv->write_reg(priv, SJA1000_FI, fi);
+		priv->write_reg(priv, SJA1000_ID1, (id & 0x000007f8) >> 3);
+		priv->write_reg(priv, SJA1000_ID2, (id & 0x00000007) << 5);
+	}
+
+	for (i = 0; i < cf->len; i++)
+		priv->write_reg(priv, dreg++, cf->data[i]);
+
+	can_put_echo_skb(skb, dev, 0, 0);
+
+	if (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT)
+		cmd_reg_val |= CMD_AT;
+
+	if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
+		cmd_reg_val |= CMD_SRR;
+	else
+		cmd_reg_val |= CMD_TR;
+
+	sja1000_write_cmdreg(priv, cmd_reg_val);
+
+	return NETDEV_TX_OK;
+}
+
+static void sja1000_rx(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &dev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+	uint8_t fi;
+	uint8_t dreg;
+	canid_t id;
+	int i;
+
+	/* create zero'ed CAN frame buffer */
+	skb = alloc_can_skb(dev, &cf);
+	if (skb == NULL)
+		return;
+
+	fi = priv->read_reg(priv, SJA1000_FI);
+
+	if (fi & SJA1000_FI_FF) {
+		/* extended frame format (EFF) */
+		dreg = SJA1000_EFF_BUF;
+		id = (priv->read_reg(priv, SJA1000_ID1) << 21)
+		    | (priv->read_reg(priv, SJA1000_ID2) << 13)
+		    | (priv->read_reg(priv, SJA1000_ID3) << 5)
+		    | (priv->read_reg(priv, SJA1000_ID4) >> 3);
+		id |= CAN_EFF_FLAG;
+	} else {
+		/* standard frame format (SFF) */
+		dreg = SJA1000_SFF_BUF;
+		id = (priv->read_reg(priv, SJA1000_ID1) << 3)
+		    | (priv->read_reg(priv, SJA1000_ID2) >> 5);
+	}
+
+	can_frame_set_cc_len(cf, fi & 0x0F, priv->can.ctrlmode);
+	if (fi & SJA1000_FI_RTR) {
+		id |= CAN_RTR_FLAG;
+	} else {
+		for (i = 0; i < cf->len; i++)
+			cf->data[i] = priv->read_reg(priv, dreg++);
+
+		stats->rx_bytes += cf->len;
+	}
+	stats->rx_packets++;
+
+	cf->can_id = id;
+
+	/* release receive buffer */
+	sja1000_write_cmdreg(priv, CMD_RRB);
+
+	netif_rx(skb);
+}
+
+static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &dev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+	enum can_state state = priv->can.state;
+	enum can_state rx_state, tx_state;
+	unsigned int rxerr, txerr;
+	uint8_t ecc, alc;
+
+	skb = alloc_can_err_skb(dev, &cf);
+	if (skb == NULL)
+		return -ENOMEM;
+
+	txerr = priv->read_reg(priv, SJA1000_TXERR);
+	rxerr = priv->read_reg(priv, SJA1000_RXERR);
+
+	if (isrc & IRQ_DOI) {
+		/* data overrun interrupt */
+		netdev_dbg(dev, "data overrun interrupt\n");
+		cf->can_id |= CAN_ERR_CRTL;
+		cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+		stats->rx_over_errors++;
+		stats->rx_errors++;
+		sja1000_write_cmdreg(priv, CMD_CDO);	/* clear bit */
+	}
+
+	if (isrc & IRQ_EI) {
+		/* error warning interrupt */
+		netdev_dbg(dev, "error warning interrupt\n");
+
+		if (status & SR_BS)
+			state = CAN_STATE_BUS_OFF;
+		else if (status & SR_ES)
+			state = CAN_STATE_ERROR_WARNING;
+		else
+			state = CAN_STATE_ERROR_ACTIVE;
+	}
+	if (state != CAN_STATE_BUS_OFF) {
+		cf->can_id |= CAN_ERR_CNT;
+		cf->data[6] = txerr;
+		cf->data[7] = rxerr;
+	}
+	if (isrc & IRQ_BEI) {
+		/* bus error interrupt */
+		priv->can.can_stats.bus_error++;
+		stats->rx_errors++;
+
+		ecc = priv->read_reg(priv, SJA1000_ECC);
+
+		cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+
+		/* set error type */
+		switch (ecc & ECC_MASK) {
+		case ECC_BIT:
+			cf->data[2] |= CAN_ERR_PROT_BIT;
+			break;
+		case ECC_FORM:
+			cf->data[2] |= CAN_ERR_PROT_FORM;
+			break;
+		case ECC_STUFF:
+			cf->data[2] |= CAN_ERR_PROT_STUFF;
+			break;
+		default:
+			break;
+		}
+
+		/* set error location */
+		cf->data[3] = ecc & ECC_SEG;
+
+		/* Error occurred during transmission? */
+		if ((ecc & ECC_DIR) == 0)
+			cf->data[2] |= CAN_ERR_PROT_TX;
+	}
+	if (isrc & IRQ_EPI) {
+		/* error passive interrupt */
+		netdev_dbg(dev, "error passive interrupt\n");
+
+		if (state == CAN_STATE_ERROR_PASSIVE)
+			state = CAN_STATE_ERROR_WARNING;
+		else
+			state = CAN_STATE_ERROR_PASSIVE;
+	}
+	if (isrc & IRQ_ALI) {
+		/* arbitration lost interrupt */
+		netdev_dbg(dev, "arbitration lost interrupt\n");
+		alc = priv->read_reg(priv, SJA1000_ALC);
+		priv->can.can_stats.arbitration_lost++;
+		cf->can_id |= CAN_ERR_LOSTARB;
+		cf->data[0] = alc & 0x1f;
+	}
+
+	if (state != priv->can.state) {
+		tx_state = txerr >= rxerr ? state : 0;
+		rx_state = txerr <= rxerr ? state : 0;
+
+		can_change_state(dev, cf, tx_state, rx_state);
+
+		if(state == CAN_STATE_BUS_OFF)
+			can_bus_off(dev);
+	}
+
+	netif_rx(skb);
+
+	return 0;
+}
+
+irqreturn_t sja1000_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = (struct net_device *)dev_id;
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &dev->stats;
+	uint8_t isrc, status;
+	int n = 0;
+
+	if (priv->pre_irq)
+		priv->pre_irq(priv);
+
+	/* Shared interrupts and IRQ off? */
+	if (priv->read_reg(priv, SJA1000_IER) == IRQ_OFF)
+		goto out;
+
+	while ((isrc = priv->read_reg(priv, SJA1000_IR)) &&
+	       (n < SJA1000_MAX_IRQ)) {
+
+		status = priv->read_reg(priv, SJA1000_SR);
+		/* check for absent controller due to hw unplug */
+		if (status == 0xFF && sja1000_is_absent(priv))
+			goto out;
+
+		if (isrc & IRQ_WUI)
+			netdev_warn(dev, "wakeup interrupt\n");
+
+		if (isrc & IRQ_TI) {
+			/* transmission buffer released */
+			if (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT &&
+			    !(status & SR_TCS)) {
+				stats->tx_errors++;
+				can_free_echo_skb(dev, 0, NULL);
+			} else {
+				/* transmission complete */
+				stats->tx_bytes += can_get_echo_skb(dev, 0, NULL);
+				stats->tx_packets++;
+			}
+			netif_wake_queue(dev);
+		}
+		if (isrc & IRQ_RI) {
+			/* receive interrupt */
+			while (status & SR_RBS) {
+				sja1000_rx(dev);
+				status = priv->read_reg(priv, SJA1000_SR);
+				/* check for absent controller */
+				if (status == 0xFF && sja1000_is_absent(priv))
+					goto out;
+			}
+		}
+		if (isrc & (IRQ_DOI | IRQ_EI | IRQ_BEI | IRQ_EPI | IRQ_ALI)) {
+			/* error interrupt */
+			if (sja1000_err(dev, isrc, status))
+				break;
+		}
+		n++;
+	}
+out:
+	if (priv->post_irq)
+		priv->post_irq(priv);
+
+	if (n >= SJA1000_MAX_IRQ)
+		netdev_dbg(dev, "%d messages handled in ISR", n);
+
+	return (n) ? IRQ_HANDLED : IRQ_NONE;
+}
+EXPORT_SYMBOL_GPL(sja1000_interrupt);
+
+static int sja1000_open(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	int err;
+
+	/* set chip into reset mode */
+	set_reset_mode(dev);
+
+	/* common open */
+	err = open_candev(dev);
+	if (err)
+		return err;
+
+	/* register interrupt handler, if not done by the device driver */
+	if (!(priv->flags & SJA1000_CUSTOM_IRQ_HANDLER)) {
+		err = request_irq(dev->irq, sja1000_interrupt, priv->irq_flags,
+				  dev->name, (void *)dev);
+		if (err) {
+			close_candev(dev);
+			return -EAGAIN;
+		}
+	}
+
+	/* init and start chi */
+	sja1000_start(dev);
+
+	netif_start_queue(dev);
+
+	return 0;
+}
+
+static int sja1000_close(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+
+	netif_stop_queue(dev);
+	set_reset_mode(dev);
+
+	if (!(priv->flags & SJA1000_CUSTOM_IRQ_HANDLER))
+		free_irq(dev->irq, (void *)dev);
+
+	close_candev(dev);
+
+	return 0;
+}
+
+struct net_device *alloc_sja1000dev(int sizeof_priv)
+{
+	struct net_device *dev;
+	struct sja1000_priv *priv;
+
+	dev = alloc_candev(sizeof(struct sja1000_priv) + sizeof_priv,
+		SJA1000_ECHO_SKB_MAX);
+	if (!dev)
+		return NULL;
+
+	priv = netdev_priv(dev);
+
+	priv->dev = dev;
+	priv->can.bittiming_const = &sja1000_bittiming_const;
+	priv->can.do_set_bittiming = sja1000_set_bittiming;
+	priv->can.do_set_mode = sja1000_set_mode;
+	priv->can.do_get_berr_counter = sja1000_get_berr_counter;
+	priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
+				       CAN_CTRLMODE_LISTENONLY |
+				       CAN_CTRLMODE_3_SAMPLES |
+				       CAN_CTRLMODE_ONE_SHOT |
+				       CAN_CTRLMODE_BERR_REPORTING |
+				       CAN_CTRLMODE_PRESUME_ACK |
+				       CAN_CTRLMODE_CC_LEN8_DLC;
+
+	spin_lock_init(&priv->cmdreg_lock);
+
+	if (sizeof_priv)
+		priv->priv = (void *)priv + sizeof(struct sja1000_priv);
+
+	return dev;
+}
+EXPORT_SYMBOL_GPL(alloc_sja1000dev);
+
+void free_sja1000dev(struct net_device *dev)
+{
+	free_candev(dev);
+}
+EXPORT_SYMBOL_GPL(free_sja1000dev);
+
+static const struct net_device_ops sja1000_netdev_ops = {
+	.ndo_open	= sja1000_open,
+	.ndo_stop	= sja1000_close,
+	.ndo_start_xmit	= sja1000_start_xmit,
+	.ndo_change_mtu	= can_change_mtu,
+};
+
+static const struct ethtool_ops sja1000_ethtool_ops = {
+	.get_ts_info = ethtool_op_get_ts_info,
+};
+
+int register_sja1000dev(struct net_device *dev)
+{
+	if (!sja1000_probe_chip(dev))
+		return -ENODEV;
+
+	dev->flags |= IFF_ECHO;	/* we support local echo */
+	dev->netdev_ops = &sja1000_netdev_ops;
+	dev->ethtool_ops = &sja1000_ethtool_ops;
+
+	set_reset_mode(dev);
+	chipset_init(dev);
+
+	return register_candev(dev);
+}
+EXPORT_SYMBOL_GPL(register_sja1000dev);
+
+void unregister_sja1000dev(struct net_device *dev)
+{
+	set_reset_mode(dev);
+	unregister_candev(dev);
+}
+EXPORT_SYMBOL_GPL(unregister_sja1000dev);
+
+static __init int sja1000_init(void)
+{
+	printk(KERN_INFO "%s CAN netdevice driver\n", DRV_NAME);
+
+	return 0;
+}
+
+module_init(sja1000_init);
+
+static __exit void sja1000_exit(void)
+{
+	printk(KERN_INFO "%s: driver removed\n", DRV_NAME);
+}
+
+module_exit(sja1000_exit);