Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

11 files changed, 5962 insertions, 0 deletions

diff --git a/drivers/net/dsa/b53/Kconfig b/drivers/net/dsa/b53/Kconfig
new file mode 100644
index 000000000..90b525160
--- /dev/null
+++ b/drivers/net/dsa/b53/Kconfig
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig B53
+	tristate "Broadcom BCM53xx managed switch support"
+	depends on NET_DSA
+	select NET_DSA_TAG_BRCM
+	select NET_DSA_TAG_BRCM_LEGACY
+	select NET_DSA_TAG_BRCM_PREPEND
+	help
+	  This driver adds support for Broadcom managed switch chips. It supports
+	  BCM5325E, BCM5365, BCM539x, BCM53115 and BCM53125 as well as BCM63XX
+	  integrated switches.
+
+config B53_SPI_DRIVER
+	tristate "B53 SPI connected switch driver"
+	depends on B53 && SPI
+	help
+	  Select to enable support for registering switches configured through SPI.
+
+config B53_MDIO_DRIVER
+	tristate "B53 MDIO connected switch driver"
+	depends on B53
+	help
+	  Select to enable support for registering switches configured through MDIO.
+
+config B53_MMAP_DRIVER
+	tristate "B53 MMAP connected switch driver"
+	depends on B53 && HAS_IOMEM
+	default BCM63XX || BMIPS_GENERIC
+	help
+	  Select to enable support for memory-mapped switches like the BCM63XX
+	  integrated switches.
+
+config B53_SRAB_DRIVER
+	tristate "B53 SRAB connected switch driver"
+	depends on B53 && HAS_IOMEM
+	depends on B53_SERDES || !B53_SERDES
+	default ARCH_BCM_IPROC
+	help
+	  Select to enable support for memory-mapped Switch Register Access
+	  Bridge Registers (SRAB) like it is found on the BCM53010
+
+config B53_SERDES
+	tristate "B53 SerDes support"
+	depends on B53
+	default ARCH_BCM_NSP
+	help
+	  Select to enable support for SerDes on e.g: Northstar Plus SoCs.
diff --git a/drivers/net/dsa/b53/Makefile b/drivers/net/dsa/b53/Makefile
new file mode 100644
index 000000000..b1be13023
--- /dev/null
+++ b/drivers/net/dsa/b53/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_B53)		+= b53_common.o
+
+obj-$(CONFIG_B53_SPI_DRIVER)	+= b53_spi.o
+obj-$(CONFIG_B53_MDIO_DRIVER)	+= b53_mdio.o
+obj-$(CONFIG_B53_MMAP_DRIVER)	+= b53_mmap.o
+obj-$(CONFIG_B53_SRAB_DRIVER)	+= b53_srab.o
+obj-$(CONFIG_B53_SERDES)	+= b53_serdes.o
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
new file mode 100644
index 000000000..59cdfc51c
--- /dev/null
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -0,0 +1,2774 @@
+/*
+ * B53 switch driver main logic
+ *
+ * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
+ * Copyright (C) 2016 Florian Fainelli <f.fainelli@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_data/b53.h>
+#include <linux/phy.h>
+#include <linux/phylink.h>
+#include <linux/etherdevice.h>
+#include <linux/if_bridge.h>
+#include <net/dsa.h>
+
+#include "b53_regs.h"
+#include "b53_priv.h"
+
+struct b53_mib_desc {
+	u8 size;
+	u8 offset;
+	const char *name;
+};
+
+/* BCM5365 MIB counters */
+static const struct b53_mib_desc b53_mibs_65[] = {
+	{ 8, 0x00, "TxOctets" },
+	{ 4, 0x08, "TxDropPkts" },
+	{ 4, 0x10, "TxBroadcastPkts" },
+	{ 4, 0x14, "TxMulticastPkts" },
+	{ 4, 0x18, "TxUnicastPkts" },
+	{ 4, 0x1c, "TxCollisions" },
+	{ 4, 0x20, "TxSingleCollision" },
+	{ 4, 0x24, "TxMultipleCollision" },
+	{ 4, 0x28, "TxDeferredTransmit" },
+	{ 4, 0x2c, "TxLateCollision" },
+	{ 4, 0x30, "TxExcessiveCollision" },
+	{ 4, 0x38, "TxPausePkts" },
+	{ 8, 0x44, "RxOctets" },
+	{ 4, 0x4c, "RxUndersizePkts" },
+	{ 4, 0x50, "RxPausePkts" },
+	{ 4, 0x54, "Pkts64Octets" },
+	{ 4, 0x58, "Pkts65to127Octets" },
+	{ 4, 0x5c, "Pkts128to255Octets" },
+	{ 4, 0x60, "Pkts256to511Octets" },
+	{ 4, 0x64, "Pkts512to1023Octets" },
+	{ 4, 0x68, "Pkts1024to1522Octets" },
+	{ 4, 0x6c, "RxOversizePkts" },
+	{ 4, 0x70, "RxJabbers" },
+	{ 4, 0x74, "RxAlignmentErrors" },
+	{ 4, 0x78, "RxFCSErrors" },
+	{ 8, 0x7c, "RxGoodOctets" },
+	{ 4, 0x84, "RxDropPkts" },
+	{ 4, 0x88, "RxUnicastPkts" },
+	{ 4, 0x8c, "RxMulticastPkts" },
+	{ 4, 0x90, "RxBroadcastPkts" },
+	{ 4, 0x94, "RxSAChanges" },
+	{ 4, 0x98, "RxFragments" },
+};
+
+#define B53_MIBS_65_SIZE	ARRAY_SIZE(b53_mibs_65)
+
+/* BCM63xx MIB counters */
+static const struct b53_mib_desc b53_mibs_63xx[] = {
+	{ 8, 0x00, "TxOctets" },
+	{ 4, 0x08, "TxDropPkts" },
+	{ 4, 0x0c, "TxQoSPkts" },
+	{ 4, 0x10, "TxBroadcastPkts" },
+	{ 4, 0x14, "TxMulticastPkts" },
+	{ 4, 0x18, "TxUnicastPkts" },
+	{ 4, 0x1c, "TxCollisions" },
+	{ 4, 0x20, "TxSingleCollision" },
+	{ 4, 0x24, "TxMultipleCollision" },
+	{ 4, 0x28, "TxDeferredTransmit" },
+	{ 4, 0x2c, "TxLateCollision" },
+	{ 4, 0x30, "TxExcessiveCollision" },
+	{ 4, 0x38, "TxPausePkts" },
+	{ 8, 0x3c, "TxQoSOctets" },
+	{ 8, 0x44, "RxOctets" },
+	{ 4, 0x4c, "RxUndersizePkts" },
+	{ 4, 0x50, "RxPausePkts" },
+	{ 4, 0x54, "Pkts64Octets" },
+	{ 4, 0x58, "Pkts65to127Octets" },
+	{ 4, 0x5c, "Pkts128to255Octets" },
+	{ 4, 0x60, "Pkts256to511Octets" },
+	{ 4, 0x64, "Pkts512to1023Octets" },
+	{ 4, 0x68, "Pkts1024to1522Octets" },
+	{ 4, 0x6c, "RxOversizePkts" },
+	{ 4, 0x70, "RxJabbers" },
+	{ 4, 0x74, "RxAlignmentErrors" },
+	{ 4, 0x78, "RxFCSErrors" },
+	{ 8, 0x7c, "RxGoodOctets" },
+	{ 4, 0x84, "RxDropPkts" },
+	{ 4, 0x88, "RxUnicastPkts" },
+	{ 4, 0x8c, "RxMulticastPkts" },
+	{ 4, 0x90, "RxBroadcastPkts" },
+	{ 4, 0x94, "RxSAChanges" },
+	{ 4, 0x98, "RxFragments" },
+	{ 4, 0xa0, "RxSymbolErrors" },
+	{ 4, 0xa4, "RxQoSPkts" },
+	{ 8, 0xa8, "RxQoSOctets" },
+	{ 4, 0xb0, "Pkts1523to2047Octets" },
+	{ 4, 0xb4, "Pkts2048to4095Octets" },
+	{ 4, 0xb8, "Pkts4096to8191Octets" },
+	{ 4, 0xbc, "Pkts8192to9728Octets" },
+	{ 4, 0xc0, "RxDiscarded" },
+};
+
+#define B53_MIBS_63XX_SIZE	ARRAY_SIZE(b53_mibs_63xx)
+
+/* MIB counters */
+static const struct b53_mib_desc b53_mibs[] = {
+	{ 8, 0x00, "TxOctets" },
+	{ 4, 0x08, "TxDropPkts" },
+	{ 4, 0x10, "TxBroadcastPkts" },
+	{ 4, 0x14, "TxMulticastPkts" },
+	{ 4, 0x18, "TxUnicastPkts" },
+	{ 4, 0x1c, "TxCollisions" },
+	{ 4, 0x20, "TxSingleCollision" },
+	{ 4, 0x24, "TxMultipleCollision" },
+	{ 4, 0x28, "TxDeferredTransmit" },
+	{ 4, 0x2c, "TxLateCollision" },
+	{ 4, 0x30, "TxExcessiveCollision" },
+	{ 4, 0x38, "TxPausePkts" },
+	{ 8, 0x50, "RxOctets" },
+	{ 4, 0x58, "RxUndersizePkts" },
+	{ 4, 0x5c, "RxPausePkts" },
+	{ 4, 0x60, "Pkts64Octets" },
+	{ 4, 0x64, "Pkts65to127Octets" },
+	{ 4, 0x68, "Pkts128to255Octets" },
+	{ 4, 0x6c, "Pkts256to511Octets" },
+	{ 4, 0x70, "Pkts512to1023Octets" },
+	{ 4, 0x74, "Pkts1024to1522Octets" },
+	{ 4, 0x78, "RxOversizePkts" },
+	{ 4, 0x7c, "RxJabbers" },
+	{ 4, 0x80, "RxAlignmentErrors" },
+	{ 4, 0x84, "RxFCSErrors" },
+	{ 8, 0x88, "RxGoodOctets" },
+	{ 4, 0x90, "RxDropPkts" },
+	{ 4, 0x94, "RxUnicastPkts" },
+	{ 4, 0x98, "RxMulticastPkts" },
+	{ 4, 0x9c, "RxBroadcastPkts" },
+	{ 4, 0xa0, "RxSAChanges" },
+	{ 4, 0xa4, "RxFragments" },
+	{ 4, 0xa8, "RxJumboPkts" },
+	{ 4, 0xac, "RxSymbolErrors" },
+	{ 4, 0xc0, "RxDiscarded" },
+};
+
+#define B53_MIBS_SIZE	ARRAY_SIZE(b53_mibs)
+
+static const struct b53_mib_desc b53_mibs_58xx[] = {
+	{ 8, 0x00, "TxOctets" },
+	{ 4, 0x08, "TxDropPkts" },
+	{ 4, 0x0c, "TxQPKTQ0" },
+	{ 4, 0x10, "TxBroadcastPkts" },
+	{ 4, 0x14, "TxMulticastPkts" },
+	{ 4, 0x18, "TxUnicastPKts" },
+	{ 4, 0x1c, "TxCollisions" },
+	{ 4, 0x20, "TxSingleCollision" },
+	{ 4, 0x24, "TxMultipleCollision" },
+	{ 4, 0x28, "TxDeferredCollision" },
+	{ 4, 0x2c, "TxLateCollision" },
+	{ 4, 0x30, "TxExcessiveCollision" },
+	{ 4, 0x34, "TxFrameInDisc" },
+	{ 4, 0x38, "TxPausePkts" },
+	{ 4, 0x3c, "TxQPKTQ1" },
+	{ 4, 0x40, "TxQPKTQ2" },
+	{ 4, 0x44, "TxQPKTQ3" },
+	{ 4, 0x48, "TxQPKTQ4" },
+	{ 4, 0x4c, "TxQPKTQ5" },
+	{ 8, 0x50, "RxOctets" },
+	{ 4, 0x58, "RxUndersizePkts" },
+	{ 4, 0x5c, "RxPausePkts" },
+	{ 4, 0x60, "RxPkts64Octets" },
+	{ 4, 0x64, "RxPkts65to127Octets" },
+	{ 4, 0x68, "RxPkts128to255Octets" },
+	{ 4, 0x6c, "RxPkts256to511Octets" },
+	{ 4, 0x70, "RxPkts512to1023Octets" },
+	{ 4, 0x74, "RxPkts1024toMaxPktsOctets" },
+	{ 4, 0x78, "RxOversizePkts" },
+	{ 4, 0x7c, "RxJabbers" },
+	{ 4, 0x80, "RxAlignmentErrors" },
+	{ 4, 0x84, "RxFCSErrors" },
+	{ 8, 0x88, "RxGoodOctets" },
+	{ 4, 0x90, "RxDropPkts" },
+	{ 4, 0x94, "RxUnicastPkts" },
+	{ 4, 0x98, "RxMulticastPkts" },
+	{ 4, 0x9c, "RxBroadcastPkts" },
+	{ 4, 0xa0, "RxSAChanges" },
+	{ 4, 0xa4, "RxFragments" },
+	{ 4, 0xa8, "RxJumboPkt" },
+	{ 4, 0xac, "RxSymblErr" },
+	{ 4, 0xb0, "InRangeErrCount" },
+	{ 4, 0xb4, "OutRangeErrCount" },
+	{ 4, 0xb8, "EEELpiEvent" },
+	{ 4, 0xbc, "EEELpiDuration" },
+	{ 4, 0xc0, "RxDiscard" },
+	{ 4, 0xc8, "TxQPKTQ6" },
+	{ 4, 0xcc, "TxQPKTQ7" },
+	{ 4, 0xd0, "TxPkts64Octets" },
+	{ 4, 0xd4, "TxPkts65to127Octets" },
+	{ 4, 0xd8, "TxPkts128to255Octets" },
+	{ 4, 0xdc, "TxPkts256to511Ocets" },
+	{ 4, 0xe0, "TxPkts512to1023Ocets" },
+	{ 4, 0xe4, "TxPkts1024toMaxPktOcets" },
+};
+
+#define B53_MIBS_58XX_SIZE	ARRAY_SIZE(b53_mibs_58xx)
+
+static int b53_do_vlan_op(struct b53_device *dev, u8 op)
+{
+	unsigned int i;
+
+	b53_write8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], VTA_START_CMD | op);
+
+	for (i = 0; i < 10; i++) {
+		u8 vta;
+
+		b53_read8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], &vta);
+		if (!(vta & VTA_START_CMD))
+			return 0;
+
+		usleep_range(100, 200);
+	}
+
+	return -EIO;
+}
+
+static void b53_set_vlan_entry(struct b53_device *dev, u16 vid,
+			       struct b53_vlan *vlan)
+{
+	if (is5325(dev)) {
+		u32 entry = 0;
+
+		if (vlan->members) {
+			entry = ((vlan->untag & VA_UNTAG_MASK_25) <<
+				 VA_UNTAG_S_25) | vlan->members;
+			if (dev->core_rev >= 3)
+				entry |= VA_VALID_25_R4 | vid << VA_VID_HIGH_S;
+			else
+				entry |= VA_VALID_25;
+		}
+
+		b53_write32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, entry);
+		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
+			    VTA_RW_STATE_WR | VTA_RW_OP_EN);
+	} else if (is5365(dev)) {
+		u16 entry = 0;
+
+		if (vlan->members)
+			entry = ((vlan->untag & VA_UNTAG_MASK_65) <<
+				 VA_UNTAG_S_65) | vlan->members | VA_VALID_65;
+
+		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, entry);
+		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
+			    VTA_RW_STATE_WR | VTA_RW_OP_EN);
+	} else {
+		b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
+		b53_write32(dev, B53_ARLIO_PAGE, dev->vta_regs[2],
+			    (vlan->untag << VTE_UNTAG_S) | vlan->members);
+
+		b53_do_vlan_op(dev, VTA_CMD_WRITE);
+	}
+
+	dev_dbg(dev->ds->dev, "VID: %d, members: 0x%04x, untag: 0x%04x\n",
+		vid, vlan->members, vlan->untag);
+}
+
+static void b53_get_vlan_entry(struct b53_device *dev, u16 vid,
+			       struct b53_vlan *vlan)
+{
+	if (is5325(dev)) {
+		u32 entry = 0;
+
+		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
+			    VTA_RW_STATE_RD | VTA_RW_OP_EN);
+		b53_read32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, &entry);
+
+		if (dev->core_rev >= 3)
+			vlan->valid = !!(entry & VA_VALID_25_R4);
+		else
+			vlan->valid = !!(entry & VA_VALID_25);
+		vlan->members = entry & VA_MEMBER_MASK;
+		vlan->untag = (entry >> VA_UNTAG_S_25) & VA_UNTAG_MASK_25;
+
+	} else if (is5365(dev)) {
+		u16 entry = 0;
+
+		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
+			    VTA_RW_STATE_WR | VTA_RW_OP_EN);
+		b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, &entry);
+
+		vlan->valid = !!(entry & VA_VALID_65);
+		vlan->members = entry & VA_MEMBER_MASK;
+		vlan->untag = (entry >> VA_UNTAG_S_65) & VA_UNTAG_MASK_65;
+	} else {
+		u32 entry = 0;
+
+		b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
+		b53_do_vlan_op(dev, VTA_CMD_READ);
+		b53_read32(dev, B53_ARLIO_PAGE, dev->vta_regs[2], &entry);
+		vlan->members = entry & VTE_MEMBERS;
+		vlan->untag = (entry >> VTE_UNTAG_S) & VTE_MEMBERS;
+		vlan->valid = true;
+	}
+}
+
+static void b53_set_forwarding(struct b53_device *dev, int enable)
+{
+	u8 mgmt;
+
+	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
+
+	if (enable)
+		mgmt |= SM_SW_FWD_EN;
+	else
+		mgmt &= ~SM_SW_FWD_EN;
+
+	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
+
+	/* Include IMP port in dumb forwarding mode
+	 */
+	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt);
+	mgmt |= B53_MII_DUMB_FWDG_EN;
+	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt);
+
+	/* Look at B53_UC_FWD_EN and B53_MC_FWD_EN to decide whether
+	 * frames should be flooded or not.
+	 */
+	b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt);
+	mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IPMC_FWD_EN;
+	b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt);
+}
+
+static void b53_enable_vlan(struct b53_device *dev, int port, bool enable,
+			    bool enable_filtering)
+{
+	u8 mgmt, vc0, vc1, vc4 = 0, vc5;
+
+	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
+	b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, &vc0);
+	b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, &vc1);
+
+	if (is5325(dev) || is5365(dev)) {
+		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
+		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, &vc5);
+	} else if (is63xx(dev)) {
+		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, &vc4);
+		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, &vc5);
+	} else {
+		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, &vc4);
+		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, &vc5);
+	}
+
+	if (enable) {
+		vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID;
+		vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN;
+		vc4 &= ~VC4_ING_VID_CHECK_MASK;
+		if (enable_filtering) {
+			vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S;
+			vc5 |= VC5_DROP_VTABLE_MISS;
+		} else {
+			vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
+			vc5 &= ~VC5_DROP_VTABLE_MISS;
+		}
+
+		if (is5325(dev))
+			vc0 &= ~VC0_RESERVED_1;
+
+		if (is5325(dev) || is5365(dev))
+			vc1 |= VC1_RX_MCST_TAG_EN;
+
+	} else {
+		vc0 &= ~(VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID);
+		vc1 &= ~(VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN);
+		vc4 &= ~VC4_ING_VID_CHECK_MASK;
+		vc5 &= ~VC5_DROP_VTABLE_MISS;
+
+		if (is5325(dev) || is5365(dev))
+			vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
+		else
+			vc4 |= VC4_ING_VID_VIO_TO_IMP << VC4_ING_VID_CHECK_S;
+
+		if (is5325(dev) || is5365(dev))
+			vc1 &= ~VC1_RX_MCST_TAG_EN;
+	}
+
+	if (!is5325(dev) && !is5365(dev))
+		vc5 &= ~VC5_VID_FFF_EN;
+
+	b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, vc0);
+	b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, vc1);
+
+	if (is5325(dev) || is5365(dev)) {
+		/* enable the high 8 bit vid check on 5325 */
+		if (is5325(dev) && enable)
+			b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3,
+				   VC3_HIGH_8BIT_EN);
+		else
+			b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
+
+		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, vc4);
+		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, vc5);
+	} else if (is63xx(dev)) {
+		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3_63XX, 0);
+		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, vc4);
+		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, vc5);
+	} else {
+		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
+		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, vc4);
+		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, vc5);
+	}
+
+	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
+
+	dev->vlan_enabled = enable;
+
+	dev_dbg(dev->dev, "Port %d VLAN enabled: %d, filtering: %d\n",
+		port, enable, enable_filtering);
+}
+
+static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100)
+{
+	u32 port_mask = 0;
+	u16 max_size = JMS_MIN_SIZE;
+
+	if (is5325(dev) || is5365(dev))
+		return -EINVAL;
+
+	if (enable) {
+		port_mask = dev->enabled_ports;
+		max_size = JMS_MAX_SIZE;
+		if (allow_10_100)
+			port_mask |= JPM_10_100_JUMBO_EN;
+	}
+
+	b53_write32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, port_mask);
+	return b53_write16(dev, B53_JUMBO_PAGE, dev->jumbo_size_reg, max_size);
+}
+
+static int b53_flush_arl(struct b53_device *dev, u8 mask)
+{
+	unsigned int i;
+
+	b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
+		   FAST_AGE_DONE | FAST_AGE_DYNAMIC | mask);
+
+	for (i = 0; i < 10; i++) {
+		u8 fast_age_ctrl;
+
+		b53_read8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
+			  &fast_age_ctrl);
+
+		if (!(fast_age_ctrl & FAST_AGE_DONE))
+			goto out;
+
+		msleep(1);
+	}
+
+	return -ETIMEDOUT;
+out:
+	/* Only age dynamic entries (default behavior) */
+	b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, FAST_AGE_DYNAMIC);
+	return 0;
+}
+
+static int b53_fast_age_port(struct b53_device *dev, int port)
+{
+	b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_PORT_CTRL, port);
+
+	return b53_flush_arl(dev, FAST_AGE_PORT);
+}
+
+static int b53_fast_age_vlan(struct b53_device *dev, u16 vid)
+{
+	b53_write16(dev, B53_CTRL_PAGE, B53_FAST_AGE_VID_CTRL, vid);
+
+	return b53_flush_arl(dev, FAST_AGE_VLAN);
+}
+
+void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
+{
+	struct b53_device *dev = ds->priv;
+	unsigned int i;
+	u16 pvlan;
+
+	/* Enable the IMP port to be in the same VLAN as the other ports
+	 * on a per-port basis such that we only have Port i and IMP in
+	 * the same VLAN.
+	 */
+	b53_for_each_port(dev, i) {
+		b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &pvlan);
+		pvlan |= BIT(cpu_port);
+		b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), pvlan);
+	}
+}
+EXPORT_SYMBOL(b53_imp_vlan_setup);
+
+static void b53_port_set_ucast_flood(struct b53_device *dev, int port,
+				     bool unicast)
+{
+	u16 uc;
+
+	b53_read16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, &uc);
+	if (unicast)
+		uc |= BIT(port);
+	else
+		uc &= ~BIT(port);
+	b53_write16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, uc);
+}
+
+static void b53_port_set_mcast_flood(struct b53_device *dev, int port,
+				     bool multicast)
+{
+	u16 mc;
+
+	b53_read16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, &mc);
+	if (multicast)
+		mc |= BIT(port);
+	else
+		mc &= ~BIT(port);
+	b53_write16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, mc);
+
+	b53_read16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, &mc);
+	if (multicast)
+		mc |= BIT(port);
+	else
+		mc &= ~BIT(port);
+	b53_write16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, mc);
+}
+
+static void b53_port_set_learning(struct b53_device *dev, int port,
+				  bool learning)
+{
+	u16 reg;
+
+	b53_read16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, &reg);
+	if (learning)
+		reg &= ~BIT(port);
+	else
+		reg |= BIT(port);
+	b53_write16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, reg);
+}
+
+int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
+{
+	struct b53_device *dev = ds->priv;
+	unsigned int cpu_port;
+	int ret = 0;
+	u16 pvlan;
+
+	if (!dsa_is_user_port(ds, port))
+		return 0;
+
+	cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
+
+	b53_port_set_ucast_flood(dev, port, true);
+	b53_port_set_mcast_flood(dev, port, true);
+	b53_port_set_learning(dev, port, false);
+
+	if (dev->ops->irq_enable)
+		ret = dev->ops->irq_enable(dev, port);
+	if (ret)
+		return ret;
+
+	/* Clear the Rx and Tx disable bits and set to no spanning tree */
+	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0);
+
+	/* Set this port, and only this one to be in the default VLAN,
+	 * if member of a bridge, restore its membership prior to
+	 * bringing down this port.
+	 */
+	b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
+	pvlan &= ~0x1ff;
+	pvlan |= BIT(port);
+	pvlan |= dev->ports[port].vlan_ctl_mask;
+	b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
+
+	b53_imp_vlan_setup(ds, cpu_port);
+
+	/* If EEE was enabled, restore it */
+	if (dev->ports[port].eee.eee_enabled)
+		b53_eee_enable_set(ds, port, true);
+
+	return 0;
+}
+EXPORT_SYMBOL(b53_enable_port);
+
+void b53_disable_port(struct dsa_switch *ds, int port)
+{
+	struct b53_device *dev = ds->priv;
+	u8 reg;
+
+	/* Disable Tx/Rx for the port */
+	b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), &reg);
+	reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE;
+	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
+
+	if (dev->ops->irq_disable)
+		dev->ops->irq_disable(dev, port);
+}
+EXPORT_SYMBOL(b53_disable_port);
+
+void b53_brcm_hdr_setup(struct dsa_switch *ds, int port)
+{
+	struct b53_device *dev = ds->priv;
+	bool tag_en = !(dev->tag_protocol == DSA_TAG_PROTO_NONE);
+	u8 hdr_ctl, val;
+	u16 reg;
+
+	/* Resolve which bit controls the Broadcom tag */
+	switch (port) {
+	case 8:
+		val = BRCM_HDR_P8_EN;
+		break;
+	case 7:
+		val = BRCM_HDR_P7_EN;
+		break;
+	case 5:
+		val = BRCM_HDR_P5_EN;
+		break;
+	default:
+		val = 0;
+		break;
+	}
+
+	/* Enable management mode if tagging is requested */
+	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &hdr_ctl);
+	if (tag_en)
+		hdr_ctl |= SM_SW_FWD_MODE;
+	else
+		hdr_ctl &= ~SM_SW_FWD_MODE;
+	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, hdr_ctl);
+
+	/* Configure the appropriate IMP port */
+	b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &hdr_ctl);
+	if (port == 8)
+		hdr_ctl |= GC_FRM_MGMT_PORT_MII;
+	else if (port == 5)
+		hdr_ctl |= GC_FRM_MGMT_PORT_M;
+	b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, hdr_ctl);
+
+	/* Enable Broadcom tags for IMP port */
+	b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl);
+	if (tag_en)
+		hdr_ctl |= val;
+	else
+		hdr_ctl &= ~val;
+	b53_write8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, hdr_ctl);
+
+	/* Registers below are only accessible on newer devices */
+	if (!is58xx(dev))
+		return;
+
+	/* Enable reception Broadcom tag for CPU TX (switch RX) to
+	 * allow us to tag outgoing frames
+	 */
+	b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, &reg);
+	if (tag_en)
+		reg &= ~BIT(port);
+	else
+		reg |= BIT(port);
+	b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, reg);
+
+	/* Enable transmission of Broadcom tags from the switch (CPU RX) to
+	 * allow delivering frames to the per-port net_devices
+	 */
+	b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, &reg);
+	if (tag_en)
+		reg &= ~BIT(port);
+	else
+		reg |= BIT(port);
+	b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, reg);
+}
+EXPORT_SYMBOL(b53_brcm_hdr_setup);
+
+static void b53_enable_cpu_port(struct b53_device *dev, int port)
+{
+	u8 port_ctrl;
+
+	/* BCM5325 CPU port is at 8 */
+	if ((is5325(dev) || is5365(dev)) && port == B53_CPU_PORT_25)
+		port = B53_CPU_PORT;
+
+	port_ctrl = PORT_CTRL_RX_BCST_EN |
+		    PORT_CTRL_RX_MCST_EN |
+		    PORT_CTRL_RX_UCST_EN;
+	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl);
+
+	b53_brcm_hdr_setup(dev->ds, port);
+
+	b53_port_set_ucast_flood(dev, port, true);
+	b53_port_set_mcast_flood(dev, port, true);
+	b53_port_set_learning(dev, port, false);
+}
+
+static void b53_enable_mib(struct b53_device *dev)
+{
+	u8 gc;
+
+	b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
+	gc &= ~(GC_RESET_MIB | GC_MIB_AC_EN);
+	b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc);
+}
+
+static u16 b53_default_pvid(struct b53_device *dev)
+{
+	if (is5325(dev) || is5365(dev))
+		return 1;
+	else
+		return 0;
+}
+
+static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port)
+{
+	struct b53_device *dev = ds->priv;
+
+	return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port);
+}
+
+int b53_configure_vlan(struct dsa_switch *ds)
+{
+	struct b53_device *dev = ds->priv;
+	struct b53_vlan vl = { 0 };
+	struct b53_vlan *v;
+	int i, def_vid;
+	u16 vid;
+
+	def_vid = b53_default_pvid(dev);
+
+	/* clear all vlan entries */
+	if (is5325(dev) || is5365(dev)) {
+		for (i = def_vid; i < dev->num_vlans; i++)
+			b53_set_vlan_entry(dev, i, &vl);
+	} else {
+		b53_do_vlan_op(dev, VTA_CMD_CLEAR);
+	}
+
+	b53_enable_vlan(dev, -1, dev->vlan_enabled, ds->vlan_filtering);
+
+	/* Create an untagged VLAN entry for the default PVID in case
+	 * CONFIG_VLAN_8021Q is disabled and there are no calls to
+	 * dsa_slave_vlan_rx_add_vid() to create the default VLAN
+	 * entry. Do this only when the tagging protocol is not
+	 * DSA_TAG_PROTO_NONE
+	 */
+	b53_for_each_port(dev, i) {
+		v = &dev->vlans[def_vid];
+		v->members |= BIT(i);
+		if (!b53_vlan_port_needs_forced_tagged(ds, i))
+			v->untag = v->members;
+		b53_write16(dev, B53_VLAN_PAGE,
+			    B53_VLAN_PORT_DEF_TAG(i), def_vid);
+	}
+
+	/* Upon initial call we have not set-up any VLANs, but upon
+	 * system resume, we need to restore all VLAN entries.
+	 */
+	for (vid = def_vid; vid < dev->num_vlans; vid++) {
+		v = &dev->vlans[vid];
+
+		if (!v->members)
+			continue;
+
+		b53_set_vlan_entry(dev, vid, v);
+		b53_fast_age_vlan(dev, vid);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(b53_configure_vlan);
+
+static void b53_switch_reset_gpio(struct b53_device *dev)
+{
+	int gpio = dev->reset_gpio;
+
+	if (gpio < 0)
+		return;
+
+	/* Reset sequence: RESET low(50ms)->high(20ms)
+	 */
+	gpio_set_value(gpio, 0);
+	mdelay(50);
+
+	gpio_set_value(gpio, 1);
+	mdelay(20);
+
+	dev->current_page = 0xff;
+}
+
+static int b53_switch_reset(struct b53_device *dev)
+{
+	unsigned int timeout = 1000;
+	u8 mgmt, reg;
+
+	b53_switch_reset_gpio(dev);
+
+	if (is539x(dev)) {
+		b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x83);
+		b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x00);
+	}
+
+	/* This is specific to 58xx devices here, do not use is58xx() which
+	 * covers the larger Starfigther 2 family, including 7445/7278 which
+	 * still use this driver as a library and need to perform the reset
+	 * earlier.
+	 */
+	if (dev->chip_id == BCM58XX_DEVICE_ID ||
+	    dev->chip_id == BCM583XX_DEVICE_ID) {
+		b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, &reg);
+		reg |= SW_RST | EN_SW_RST | EN_CH_RST;
+		b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg);
+
+		do {
+			b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, &reg);
+			if (!(reg & SW_RST))
+				break;
+
+			usleep_range(1000, 2000);
+		} while (timeout-- > 0);
+
+		if (timeout == 0) {
+			dev_err(dev->dev,
+				"Timeout waiting for SW_RST to clear!\n");
+			return -ETIMEDOUT;
+		}
+	}
+
+	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
+
+	if (!(mgmt & SM_SW_FWD_EN)) {
+		mgmt &= ~SM_SW_FWD_MODE;
+		mgmt |= SM_SW_FWD_EN;
+
+		b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
+		b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
+
+		if (!(mgmt & SM_SW_FWD_EN)) {
+			dev_err(dev->dev, "Failed to enable switch!\n");
+			return -EINVAL;
+		}
+	}
+
+	b53_enable_mib(dev);
+
+	return b53_flush_arl(dev, FAST_AGE_STATIC);
+}
+
+static int b53_phy_read16(struct dsa_switch *ds, int addr, int reg)
+{
+	struct b53_device *priv = ds->priv;
+	u16 value = 0;
+	int ret;
+
+	if (priv->ops->phy_read16)
+		ret = priv->ops->phy_read16(priv, addr, reg, &value);
+	else
+		ret = b53_read16(priv, B53_PORT_MII_PAGE(addr),
+				 reg * 2, &value);
+
+	return ret ? ret : value;
+}
+
+static int b53_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
+{
+	struct b53_device *priv = ds->priv;
+
+	if (priv->ops->phy_write16)
+		return priv->ops->phy_write16(priv, addr, reg, val);
+
+	return b53_write16(priv, B53_PORT_MII_PAGE(addr), reg * 2, val);
+}
+
+static int b53_reset_switch(struct b53_device *priv)
+{
+	/* reset vlans */
+	memset(priv->vlans, 0, sizeof(*priv->vlans) * priv->num_vlans);
+	memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports);
+
+	priv->serdes_lane = B53_INVALID_LANE;
+
+	return b53_switch_reset(priv);
+}
+
+static int b53_apply_config(struct b53_device *priv)
+{
+	/* disable switching */
+	b53_set_forwarding(priv, 0);
+
+	b53_configure_vlan(priv->ds);
+
+	/* enable switching */
+	b53_set_forwarding(priv, 1);
+
+	return 0;
+}
+
+static void b53_reset_mib(struct b53_device *priv)
+{
+	u8 gc;
+
+	b53_read8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
+
+	b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc | GC_RESET_MIB);
+	msleep(1);
+	b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc & ~GC_RESET_MIB);
+	msleep(1);
+}
+
+static const struct b53_mib_desc *b53_get_mib(struct b53_device *dev)
+{
+	if (is5365(dev))
+		return b53_mibs_65;
+	else if (is63xx(dev))
+		return b53_mibs_63xx;
+	else if (is58xx(dev))
+		return b53_mibs_58xx;
+	else
+		return b53_mibs;
+}
+
+static unsigned int b53_get_mib_size(struct b53_device *dev)
+{
+	if (is5365(dev))
+		return B53_MIBS_65_SIZE;
+	else if (is63xx(dev))
+		return B53_MIBS_63XX_SIZE;
+	else if (is58xx(dev))
+		return B53_MIBS_58XX_SIZE;
+	else
+		return B53_MIBS_SIZE;
+}
+
+static struct phy_device *b53_get_phy_device(struct dsa_switch *ds, int port)
+{
+	/* These ports typically do not have built-in PHYs */
+	switch (port) {
+	case B53_CPU_PORT_25:
+	case 7:
+	case B53_CPU_PORT:
+		return NULL;
+	}
+
+	return mdiobus_get_phy(ds->slave_mii_bus, port);
+}
+
+void b53_get_strings(struct dsa_switch *ds, int port, u32 stringset,
+		     uint8_t *data)
+{
+	struct b53_device *dev = ds->priv;
+	const struct b53_mib_desc *mibs = b53_get_mib(dev);
+	unsigned int mib_size = b53_get_mib_size(dev);
+	struct phy_device *phydev;
+	unsigned int i;
+
+	if (stringset == ETH_SS_STATS) {
+		for (i = 0; i < mib_size; i++)
+			strscpy(data + i * ETH_GSTRING_LEN,
+				mibs[i].name, ETH_GSTRING_LEN);
+	} else if (stringset == ETH_SS_PHY_STATS) {
+		phydev = b53_get_phy_device(ds, port);
+		if (!phydev)
+			return;
+
+		phy_ethtool_get_strings(phydev, data);
+	}
+}
+EXPORT_SYMBOL(b53_get_strings);
+
+void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
+{
+	struct b53_device *dev = ds->priv;
+	const struct b53_mib_desc *mibs = b53_get_mib(dev);
+	unsigned int mib_size = b53_get_mib_size(dev);
+	const struct b53_mib_desc *s;
+	unsigned int i;
+	u64 val = 0;
+
+	if (is5365(dev) && port == 5)
+		port = 8;
+
+	mutex_lock(&dev->stats_mutex);
+
+	for (i = 0; i < mib_size; i++) {
+		s = &mibs[i];
+
+		if (s->size == 8) {
+			b53_read64(dev, B53_MIB_PAGE(port), s->offset, &val);
+		} else {
+			u32 val32;
+
+			b53_read32(dev, B53_MIB_PAGE(port), s->offset,
+				   &val32);
+			val = val32;
+		}
+		data[i] = (u64)val;
+	}
+
+	mutex_unlock(&dev->stats_mutex);
+}
+EXPORT_SYMBOL(b53_get_ethtool_stats);
+
+void b53_get_ethtool_phy_stats(struct dsa_switch *ds, int port, uint64_t *data)
+{
+	struct phy_device *phydev;
+
+	phydev = b53_get_phy_device(ds, port);
+	if (!phydev)
+		return;
+
+	phy_ethtool_get_stats(phydev, NULL, data);
+}
+EXPORT_SYMBOL(b53_get_ethtool_phy_stats);
+
+int b53_get_sset_count(struct dsa_switch *ds, int port, int sset)
+{
+	struct b53_device *dev = ds->priv;
+	struct phy_device *phydev;
+
+	if (sset == ETH_SS_STATS) {
+		return b53_get_mib_size(dev);
+	} else if (sset == ETH_SS_PHY_STATS) {
+		phydev = b53_get_phy_device(ds, port);
+		if (!phydev)
+			return 0;
+
+		return phy_ethtool_get_sset_count(phydev);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(b53_get_sset_count);
+
+enum b53_devlink_resource_id {
+	B53_DEVLINK_PARAM_ID_VLAN_TABLE,
+};
+
+static u64 b53_devlink_vlan_table_get(void *priv)
+{
+	struct b53_device *dev = priv;
+	struct b53_vlan *vl;
+	unsigned int i;
+	u64 count = 0;
+
+	for (i = 0; i < dev->num_vlans; i++) {
+		vl = &dev->vlans[i];
+		if (vl->members)
+			count++;
+	}
+
+	return count;
+}
+
+int b53_setup_devlink_resources(struct dsa_switch *ds)
+{
+	struct devlink_resource_size_params size_params;
+	struct b53_device *dev = ds->priv;
+	int err;
+
+	devlink_resource_size_params_init(&size_params, dev->num_vlans,
+					  dev->num_vlans,
+					  1, DEVLINK_RESOURCE_UNIT_ENTRY);
+
+	err = dsa_devlink_resource_register(ds, "VLAN", dev->num_vlans,
+					    B53_DEVLINK_PARAM_ID_VLAN_TABLE,
+					    DEVLINK_RESOURCE_ID_PARENT_TOP,
+					    &size_params);
+	if (err)
+		goto out;
+
+	dsa_devlink_resource_occ_get_register(ds,
+					      B53_DEVLINK_PARAM_ID_VLAN_TABLE,
+					      b53_devlink_vlan_table_get, dev);
+
+	return 0;
+out:
+	dsa_devlink_resources_unregister(ds);
+	return err;
+}
+EXPORT_SYMBOL(b53_setup_devlink_resources);
+
+static int b53_setup(struct dsa_switch *ds)
+{
+	struct b53_device *dev = ds->priv;
+	unsigned int port;
+	int ret;
+
+	/* Request bridge PVID untagged when DSA_TAG_PROTO_NONE is set
+	 * which forces the CPU port to be tagged in all VLANs.
+	 */
+	ds->untag_bridge_pvid = dev->tag_protocol == DSA_TAG_PROTO_NONE;
+
+	ret = b53_reset_switch(dev);
+	if (ret) {
+		dev_err(ds->dev, "failed to reset switch\n");
+		return ret;
+	}
+
+	b53_reset_mib(dev);
+
+	ret = b53_apply_config(dev);
+	if (ret) {
+		dev_err(ds->dev, "failed to apply configuration\n");
+		return ret;
+	}
+
+	/* Configure IMP/CPU port, disable all other ports. Enabled
+	 * ports will be configured with .port_enable
+	 */
+	for (port = 0; port < dev->num_ports; port++) {
+		if (dsa_is_cpu_port(ds, port))
+			b53_enable_cpu_port(dev, port);
+		else
+			b53_disable_port(ds, port);
+	}
+
+	return b53_setup_devlink_resources(ds);
+}
+
+static void b53_teardown(struct dsa_switch *ds)
+{
+	dsa_devlink_resources_unregister(ds);
+}
+
+static void b53_force_link(struct b53_device *dev, int port, int link)
+{
+	u8 reg, val, off;
+
+	/* Override the port settings */
+	if (port == dev->imp_port) {
+		off = B53_PORT_OVERRIDE_CTRL;
+		val = PORT_OVERRIDE_EN;
+	} else {
+		off = B53_GMII_PORT_OVERRIDE_CTRL(port);
+		val = GMII_PO_EN;
+	}
+
+	b53_read8(dev, B53_CTRL_PAGE, off, &reg);
+	reg |= val;
+	if (link)
+		reg |= PORT_OVERRIDE_LINK;
+	else
+		reg &= ~PORT_OVERRIDE_LINK;
+	b53_write8(dev, B53_CTRL_PAGE, off, reg);
+}
+
+static void b53_force_port_config(struct b53_device *dev, int port,
+				  int speed, int duplex,
+				  bool tx_pause, bool rx_pause)
+{
+	u8 reg, val, off;
+
+	/* Override the port settings */
+	if (port == dev->imp_port) {
+		off = B53_PORT_OVERRIDE_CTRL;
+		val = PORT_OVERRIDE_EN;
+	} else {
+		off = B53_GMII_PORT_OVERRIDE_CTRL(port);
+		val = GMII_PO_EN;
+	}
+
+	b53_read8(dev, B53_CTRL_PAGE, off, &reg);
+	reg |= val;
+	if (duplex == DUPLEX_FULL)
+		reg |= PORT_OVERRIDE_FULL_DUPLEX;
+	else
+		reg &= ~PORT_OVERRIDE_FULL_DUPLEX;
+
+	switch (speed) {
+	case 2000:
+		reg |= PORT_OVERRIDE_SPEED_2000M;
+		fallthrough;
+	case SPEED_1000:
+		reg |= PORT_OVERRIDE_SPEED_1000M;
+		break;
+	case SPEED_100:
+		reg |= PORT_OVERRIDE_SPEED_100M;
+		break;
+	case SPEED_10:
+		reg |= PORT_OVERRIDE_SPEED_10M;
+		break;
+	default:
+		dev_err(dev->dev, "unknown speed: %d\n", speed);
+		return;
+	}
+
+	if (rx_pause)
+		reg |= PORT_OVERRIDE_RX_FLOW;
+	if (tx_pause)
+		reg |= PORT_OVERRIDE_TX_FLOW;
+
+	b53_write8(dev, B53_CTRL_PAGE, off, reg);
+}
+
+static void b53_adjust_link(struct dsa_switch *ds, int port,
+			    struct phy_device *phydev)
+{
+	struct b53_device *dev = ds->priv;
+	struct ethtool_eee *p = &dev->ports[port].eee;
+	u8 rgmii_ctrl = 0, reg = 0, off;
+	bool tx_pause = false;
+	bool rx_pause = false;
+
+	if (!phy_is_pseudo_fixed_link(phydev))
+		return;
+
+	/* Enable flow control on BCM5301x's CPU port */
+	if (is5301x(dev) && dsa_is_cpu_port(ds, port))
+		tx_pause = rx_pause = true;
+
+	if (phydev->pause) {
+		if (phydev->asym_pause)
+			tx_pause = true;
+		rx_pause = true;
+	}
+
+	b53_force_port_config(dev, port, phydev->speed, phydev->duplex,
+			      tx_pause, rx_pause);
+	b53_force_link(dev, port, phydev->link);
+
+	if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
+		if (port == dev->imp_port)
+			off = B53_RGMII_CTRL_IMP;
+		else
+			off = B53_RGMII_CTRL_P(port);
+
+		/* Configure the port RGMII clock delay by DLL disabled and
+		 * tx_clk aligned timing (restoring to reset defaults)
+		 */
+		b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
+		rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC |
+				RGMII_CTRL_TIMING_SEL);
+
+		/* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make
+		 * sure that we enable the port TX clock internal delay to
+		 * account for this internal delay that is inserted, otherwise
+		 * the switch won't be able to receive correctly.
+		 *
+		 * PHY_INTERFACE_MODE_RGMII means that we are not introducing
+		 * any delay neither on transmission nor reception, so the
+		 * BCM53125 must also be configured accordingly to account for
+		 * the lack of delay and introduce
+		 *
+		 * The BCM53125 switch has its RX clock and TX clock control
+		 * swapped, hence the reason why we modify the TX clock path in
+		 * the "RGMII" case
+		 */
+		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+			rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
+		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+			rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC;
+		rgmii_ctrl |= RGMII_CTRL_TIMING_SEL;
+		b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
+
+		dev_info(ds->dev, "Configured port %d for %s\n", port,
+			 phy_modes(phydev->interface));
+	}
+
+	/* configure MII port if necessary */
+	if (is5325(dev)) {
+		b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
+			  &reg);
+
+		/* reverse mii needs to be enabled */
+		if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
+			b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
+				   reg | PORT_OVERRIDE_RV_MII_25);
+			b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
+				  &reg);
+
+			if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
+				dev_err(ds->dev,
+					"Failed to enable reverse MII mode\n");
+				return;
+			}
+		}
+	}
+
+	/* Re-negotiate EEE if it was enabled already */
+	p->eee_enabled = b53_eee_init(ds, port, phydev);
+}
+
+void b53_port_event(struct dsa_switch *ds, int port)
+{
+	struct b53_device *dev = ds->priv;
+	bool link;
+	u16 sts;
+
+	b53_read16(dev, B53_STAT_PAGE, B53_LINK_STAT, &sts);
+	link = !!(sts & BIT(port));
+	dsa_port_phylink_mac_change(ds, port, link);
+}
+EXPORT_SYMBOL(b53_port_event);
+
+static void b53_phylink_get_caps(struct dsa_switch *ds, int port,
+				 struct phylink_config *config)
+{
+	struct b53_device *dev = ds->priv;
+
+	/* Internal ports need GMII for PHYLIB */
+	__set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces);
+
+	/* These switches appear to support MII and RevMII too, but beyond
+	 * this, the code gives very few clues. FIXME: We probably need more
+	 * interface modes here.
+	 *
+	 * According to b53_srab_mux_init(), ports 3..5 can support:
+	 *  SGMII, MII, GMII, RGMII or INTERNAL depending on the MUX setting.
+	 * However, the interface mode read from the MUX configuration is
+	 * not passed back to DSA, so phylink uses NA.
+	 * DT can specify RGMII for ports 0, 1.
+	 * For MDIO, port 8 can be RGMII_TXID.
+	 */
+	__set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_REVMII, config->supported_interfaces);
+
+	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+		MAC_10 | MAC_100;
+
+	/* 5325/5365 are not capable of gigabit speeds, everything else is.
+	 * Note: the original code also exclulded Gigagbit for MII, RevMII
+	 * and 802.3z modes. MII and RevMII are not able to work above 100M,
+	 * so will be excluded by the generic validator implementation.
+	 * However, the exclusion of Gigabit for 802.3z just seems wrong.
+	 */
+	if (!(is5325(dev) || is5365(dev)))
+		config->mac_capabilities |= MAC_1000;
+
+	/* Get the implementation specific capabilities */
+	if (dev->ops->phylink_get_caps)
+		dev->ops->phylink_get_caps(dev, port, config);
+
+	/* This driver does not make use of the speed, duplex, pause or the
+	 * advertisement in its mac_config, so it is safe to mark this driver
+	 * as non-legacy.
+	 */
+	config->legacy_pre_march2020 = false;
+}
+
+static struct phylink_pcs *b53_phylink_mac_select_pcs(struct dsa_switch *ds,
+						      int port,
+						      phy_interface_t interface)
+{
+	struct b53_device *dev = ds->priv;
+
+	if (!dev->ops->phylink_mac_select_pcs)
+		return NULL;
+
+	return dev->ops->phylink_mac_select_pcs(dev, port, interface);
+}
+
+void b53_phylink_mac_config(struct dsa_switch *ds, int port,
+			    unsigned int mode,
+			    const struct phylink_link_state *state)
+{
+}
+EXPORT_SYMBOL(b53_phylink_mac_config);
+
+void b53_phylink_mac_link_down(struct dsa_switch *ds, int port,
+			       unsigned int mode,
+			       phy_interface_t interface)
+{
+	struct b53_device *dev = ds->priv;
+
+	if (mode == MLO_AN_PHY)
+		return;
+
+	if (mode == MLO_AN_FIXED) {
+		b53_force_link(dev, port, false);
+		return;
+	}
+
+	if (phy_interface_mode_is_8023z(interface) &&
+	    dev->ops->serdes_link_set)
+		dev->ops->serdes_link_set(dev, port, mode, interface, false);
+}
+EXPORT_SYMBOL(b53_phylink_mac_link_down);
+
+void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
+			     unsigned int mode,
+			     phy_interface_t interface,
+			     struct phy_device *phydev,
+			     int speed, int duplex,
+			     bool tx_pause, bool rx_pause)
+{
+	struct b53_device *dev = ds->priv;
+
+	if (mode == MLO_AN_PHY)
+		return;
+
+	if (mode == MLO_AN_FIXED) {
+		b53_force_port_config(dev, port, speed, duplex,
+				      tx_pause, rx_pause);
+		b53_force_link(dev, port, true);
+		return;
+	}
+
+	if (phy_interface_mode_is_8023z(interface) &&
+	    dev->ops->serdes_link_set)
+		dev->ops->serdes_link_set(dev, port, mode, interface, true);
+}
+EXPORT_SYMBOL(b53_phylink_mac_link_up);
+
+int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
+		       struct netlink_ext_ack *extack)
+{
+	struct b53_device *dev = ds->priv;
+
+	b53_enable_vlan(dev, port, dev->vlan_enabled, vlan_filtering);
+
+	return 0;
+}
+EXPORT_SYMBOL(b53_vlan_filtering);
+
+static int b53_vlan_prepare(struct dsa_switch *ds, int port,
+			    const struct switchdev_obj_port_vlan *vlan)
+{
+	struct b53_device *dev = ds->priv;
+
+	if ((is5325(dev) || is5365(dev)) && vlan->vid == 0)
+		return -EOPNOTSUPP;
+
+	/* Port 7 on 7278 connects to the ASP's UniMAC which is not capable of
+	 * receiving VLAN tagged frames at all, we can still allow the port to
+	 * be configured for egress untagged.
+	 */
+	if (dev->chip_id == BCM7278_DEVICE_ID && port == 7 &&
+	    !(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED))
+		return -EINVAL;
+
+	if (vlan->vid >= dev->num_vlans)
+		return -ERANGE;
+
+	b53_enable_vlan(dev, port, true, ds->vlan_filtering);
+
+	return 0;
+}
+
+int b53_vlan_add(struct dsa_switch *ds, int port,
+		 const struct switchdev_obj_port_vlan *vlan,
+		 struct netlink_ext_ack *extack)
+{
+	struct b53_device *dev = ds->priv;
+	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+	bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
+	struct b53_vlan *vl;
+	int err;
+
+	err = b53_vlan_prepare(ds, port, vlan);
+	if (err)
+		return err;
+
+	vl = &dev->vlans[vlan->vid];
+
+	b53_get_vlan_entry(dev, vlan->vid, vl);
+
+	if (vlan->vid == 0 && vlan->vid == b53_default_pvid(dev))
+		untagged = true;
+
+	vl->members |= BIT(port);
+	if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port))
+		vl->untag |= BIT(port);
+	else
+		vl->untag &= ~BIT(port);
+
+	b53_set_vlan_entry(dev, vlan->vid, vl);
+	b53_fast_age_vlan(dev, vlan->vid);
+
+	if (pvid && !dsa_is_cpu_port(ds, port)) {
+		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port),
+			    vlan->vid);
+		b53_fast_age_vlan(dev, vlan->vid);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(b53_vlan_add);
+
+int b53_vlan_del(struct dsa_switch *ds, int port,
+		 const struct switchdev_obj_port_vlan *vlan)
+{
+	struct b53_device *dev = ds->priv;
+	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+	struct b53_vlan *vl;
+	u16 pvid;
+
+	b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid);
+
+	vl = &dev->vlans[vlan->vid];
+
+	b53_get_vlan_entry(dev, vlan->vid, vl);
+
+	vl->members &= ~BIT(port);
+
+	if (pvid == vlan->vid)
+		pvid = b53_default_pvid(dev);
+
+	if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port))
+		vl->untag &= ~(BIT(port));
+
+	b53_set_vlan_entry(dev, vlan->vid, vl);
+	b53_fast_age_vlan(dev, vlan->vid);
+
+	b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), pvid);
+	b53_fast_age_vlan(dev, pvid);
+
+	return 0;
+}
+EXPORT_SYMBOL(b53_vlan_del);
+
+/* Address Resolution Logic routines. Caller must hold &dev->arl_mutex. */
+static int b53_arl_op_wait(struct b53_device *dev)
+{
+	unsigned int timeout = 10;
+	u8 reg;
+
+	do {
+		b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, &reg);
+		if (!(reg & ARLTBL_START_DONE))
+			return 0;
+
+		usleep_range(1000, 2000);
+	} while (timeout--);
+
+	dev_warn(dev->dev, "timeout waiting for ARL to finish: 0x%02x\n", reg);
+
+	return -ETIMEDOUT;
+}
+
+static int b53_arl_rw_op(struct b53_device *dev, unsigned int op)
+{
+	u8 reg;
+
+	if (op > ARLTBL_RW)
+		return -EINVAL;
+
+	b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, &reg);
+	reg |= ARLTBL_START_DONE;
+	if (op)
+		reg |= ARLTBL_RW;
+	else
+		reg &= ~ARLTBL_RW;
+	if (dev->vlan_enabled)
+		reg &= ~ARLTBL_IVL_SVL_SELECT;
+	else
+		reg |= ARLTBL_IVL_SVL_SELECT;
+	b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, reg);
+
+	return b53_arl_op_wait(dev);
+}
+
+static int b53_arl_read(struct b53_device *dev, u64 mac,
+			u16 vid, struct b53_arl_entry *ent, u8 *idx)
+{
+	DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES);
+	unsigned int i;
+	int ret;
+
+	ret = b53_arl_op_wait(dev);
+	if (ret)
+		return ret;
+
+	bitmap_zero(free_bins, dev->num_arl_bins);
+
+	/* Read the bins */
+	for (i = 0; i < dev->num_arl_bins; i++) {
+		u64 mac_vid;
+		u32 fwd_entry;
+
+		b53_read64(dev, B53_ARLIO_PAGE,
+			   B53_ARLTBL_MAC_VID_ENTRY(i), &mac_vid);
+		b53_read32(dev, B53_ARLIO_PAGE,
+			   B53_ARLTBL_DATA_ENTRY(i), &fwd_entry);
+		b53_arl_to_entry(ent, mac_vid, fwd_entry);
+
+		if (!(fwd_entry & ARLTBL_VALID)) {
+			set_bit(i, free_bins);
+			continue;
+		}
+		if ((mac_vid & ARLTBL_MAC_MASK) != mac)
+			continue;
+		if (dev->vlan_enabled &&
+		    ((mac_vid >> ARLTBL_VID_S) & ARLTBL_VID_MASK) != vid)
+			continue;
+		*idx = i;
+		return 0;
+	}
+
+	*idx = find_first_bit(free_bins, dev->num_arl_bins);
+	return *idx >= dev->num_arl_bins ? -ENOSPC : -ENOENT;
+}
+
+static int b53_arl_op(struct b53_device *dev, int op, int port,
+		      const unsigned char *addr, u16 vid, bool is_valid)
+{
+	struct b53_arl_entry ent;
+	u32 fwd_entry;
+	u64 mac, mac_vid = 0;
+	u8 idx = 0;
+	int ret;
+
+	/* Convert the array into a 64-bit MAC */
+	mac = ether_addr_to_u64(addr);
+
+	/* Perform a read for the given MAC and VID */
+	b53_write48(dev, B53_ARLIO_PAGE, B53_MAC_ADDR_IDX, mac);
+	b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid);
+
+	/* Issue a read operation for this MAC */
+	ret = b53_arl_rw_op(dev, 1);
+	if (ret)
+		return ret;
+
+	ret = b53_arl_read(dev, mac, vid, &ent, &idx);
+
+	/* If this is a read, just finish now */
+	if (op)
+		return ret;
+
+	switch (ret) {
+	case -ETIMEDOUT:
+		return ret;
+	case -ENOSPC:
+		dev_dbg(dev->dev, "{%pM,%.4d} no space left in ARL\n",
+			addr, vid);
+		return is_valid ? ret : 0;
+	case -ENOENT:
+		/* We could not find a matching MAC, so reset to a new entry */
+		dev_dbg(dev->dev, "{%pM,%.4d} not found, using idx: %d\n",
+			addr, vid, idx);
+		fwd_entry = 0;
+		break;
+	default:
+		dev_dbg(dev->dev, "{%pM,%.4d} found, using idx: %d\n",
+			addr, vid, idx);
+		break;
+	}
+
+	/* For multicast address, the port is a bitmask and the validity
+	 * is determined by having at least one port being still active
+	 */
+	if (!is_multicast_ether_addr(addr)) {
+		ent.port = port;
+		ent.is_valid = is_valid;
+	} else {
+		if (is_valid)
+			ent.port |= BIT(port);
+		else
+			ent.port &= ~BIT(port);
+
+		ent.is_valid = !!(ent.port);
+	}
+
+	ent.vid = vid;
+	ent.is_static = true;
+	ent.is_age = false;
+	memcpy(ent.mac, addr, ETH_ALEN);
+	b53_arl_from_entry(&mac_vid, &fwd_entry, &ent);
+
+	b53_write64(dev, B53_ARLIO_PAGE,
+		    B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid);
+	b53_write32(dev, B53_ARLIO_PAGE,
+		    B53_ARLTBL_DATA_ENTRY(idx), fwd_entry);
+
+	return b53_arl_rw_op(dev, 0);
+}
+
+int b53_fdb_add(struct dsa_switch *ds, int port,
+		const unsigned char *addr, u16 vid,
+		struct dsa_db db)
+{
+	struct b53_device *priv = ds->priv;
+	int ret;
+
+	/* 5325 and 5365 require some more massaging, but could
+	 * be supported eventually
+	 */
+	if (is5325(priv) || is5365(priv))
+		return -EOPNOTSUPP;
+
+	mutex_lock(&priv->arl_mutex);
+	ret = b53_arl_op(priv, 0, port, addr, vid, true);
+	mutex_unlock(&priv->arl_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(b53_fdb_add);
+
+int b53_fdb_del(struct dsa_switch *ds, int port,
+		const unsigned char *addr, u16 vid,
+		struct dsa_db db)
+{
+	struct b53_device *priv = ds->priv;
+	int ret;
+
+	mutex_lock(&priv->arl_mutex);
+	ret = b53_arl_op(priv, 0, port, addr, vid, false);
+	mutex_unlock(&priv->arl_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(b53_fdb_del);
+
+static int b53_arl_search_wait(struct b53_device *dev)
+{
+	unsigned int timeout = 1000;
+	u8 reg;
+
+	do {
+		b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, &reg);
+		if (!(reg & ARL_SRCH_STDN))
+			return 0;
+
+		if (reg & ARL_SRCH_VLID)
+			return 0;
+
+		usleep_range(1000, 2000);
+	} while (timeout--);
+
+	return -ETIMEDOUT;
+}
+
+static void b53_arl_search_rd(struct b53_device *dev, u8 idx,
+			      struct b53_arl_entry *ent)
+{
+	u64 mac_vid;
+	u32 fwd_entry;
+
+	b53_read64(dev, B53_ARLIO_PAGE,
+		   B53_ARL_SRCH_RSTL_MACVID(idx), &mac_vid);
+	b53_read32(dev, B53_ARLIO_PAGE,
+		   B53_ARL_SRCH_RSTL(idx), &fwd_entry);
+	b53_arl_to_entry(ent, mac_vid, fwd_entry);
+}
+
+static int b53_fdb_copy(int port, const struct b53_arl_entry *ent,
+			dsa_fdb_dump_cb_t *cb, void *data)
+{
+	if (!ent->is_valid)
+		return 0;
+
+	if (port != ent->port)
+		return 0;
+
+	return cb(ent->mac, ent->vid, ent->is_static, data);
+}
+
+int b53_fdb_dump(struct dsa_switch *ds, int port,
+		 dsa_fdb_dump_cb_t *cb, void *data)
+{
+	struct b53_device *priv = ds->priv;
+	struct b53_arl_entry results[2];
+	unsigned int count = 0;
+	int ret;
+	u8 reg;
+
+	mutex_lock(&priv->arl_mutex);
+
+	/* Start search operation */
+	reg = ARL_SRCH_STDN;
+	b53_write8(priv, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, reg);
+
+	do {
+		ret = b53_arl_search_wait(priv);
+		if (ret)
+			break;
+
+		b53_arl_search_rd(priv, 0, &results[0]);
+		ret = b53_fdb_copy(port, &results[0], cb, data);
+		if (ret)
+			break;
+
+		if (priv->num_arl_bins > 2) {
+			b53_arl_search_rd(priv, 1, &results[1]);
+			ret = b53_fdb_copy(port, &results[1], cb, data);
+			if (ret)
+				break;
+
+			if (!results[0].is_valid && !results[1].is_valid)
+				break;
+		}
+
+	} while (count++ < b53_max_arl_entries(priv) / 2);
+
+	mutex_unlock(&priv->arl_mutex);
+
+	return 0;
+}
+EXPORT_SYMBOL(b53_fdb_dump);
+
+int b53_mdb_add(struct dsa_switch *ds, int port,
+		const struct switchdev_obj_port_mdb *mdb,
+		struct dsa_db db)
+{
+	struct b53_device *priv = ds->priv;
+	int ret;
+
+	/* 5325 and 5365 require some more massaging, but could
+	 * be supported eventually
+	 */
+	if (is5325(priv) || is5365(priv))
+		return -EOPNOTSUPP;
+
+	mutex_lock(&priv->arl_mutex);
+	ret = b53_arl_op(priv, 0, port, mdb->addr, mdb->vid, true);
+	mutex_unlock(&priv->arl_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(b53_mdb_add);
+
+int b53_mdb_del(struct dsa_switch *ds, int port,
+		const struct switchdev_obj_port_mdb *mdb,
+		struct dsa_db db)
+{
+	struct b53_device *priv = ds->priv;
+	int ret;
+
+	mutex_lock(&priv->arl_mutex);
+	ret = b53_arl_op(priv, 0, port, mdb->addr, mdb->vid, false);
+	mutex_unlock(&priv->arl_mutex);
+	if (ret)
+		dev_err(ds->dev, "failed to delete MDB entry\n");
+
+	return ret;
+}
+EXPORT_SYMBOL(b53_mdb_del);
+
+int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge,
+		bool *tx_fwd_offload, struct netlink_ext_ack *extack)
+{
+	struct b53_device *dev = ds->priv;
+	s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
+	u16 pvlan, reg;
+	unsigned int i;
+
+	/* On 7278, port 7 which connects to the ASP should only receive
+	 * traffic from matching CFP rules.
+	 */
+	if (dev->chip_id == BCM7278_DEVICE_ID && port == 7)
+		return -EINVAL;
+
+	/* Make this port leave the all VLANs join since we will have proper
+	 * VLAN entries from now on
+	 */
+	if (is58xx(dev)) {
+		b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, &reg);
+		reg &= ~BIT(port);
+		if ((reg & BIT(cpu_port)) == BIT(cpu_port))
+			reg &= ~BIT(cpu_port);
+		b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
+	}
+
+	b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
+
+	b53_for_each_port(dev, i) {
+		if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
+			continue;
+
+		/* Add this local port to the remote port VLAN control
+		 * membership and update the remote port bitmask
+		 */
+		b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &reg);
+		reg |= BIT(port);
+		b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
+		dev->ports[i].vlan_ctl_mask = reg;
+
+		pvlan |= BIT(i);
+	}
+
+	/* Configure the local port VLAN control membership to include
+	 * remote ports and update the local port bitmask
+	 */
+	b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
+	dev->ports[port].vlan_ctl_mask = pvlan;
+
+	return 0;
+}
+EXPORT_SYMBOL(b53_br_join);
+
+void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge)
+{
+	struct b53_device *dev = ds->priv;
+	struct b53_vlan *vl = &dev->vlans[0];
+	s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
+	unsigned int i;
+	u16 pvlan, reg, pvid;
+
+	b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
+
+	b53_for_each_port(dev, i) {
+		/* Don't touch the remaining ports */
+		if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
+			continue;
+
+		b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &reg);
+		reg &= ~BIT(port);
+		b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
+		dev->ports[port].vlan_ctl_mask = reg;
+
+		/* Prevent self removal to preserve isolation */
+		if (port != i)
+			pvlan &= ~BIT(i);
+	}
+
+	b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
+	dev->ports[port].vlan_ctl_mask = pvlan;
+
+	pvid = b53_default_pvid(dev);
+
+	/* Make this port join all VLANs without VLAN entries */
+	if (is58xx(dev)) {
+		b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, &reg);
+		reg |= BIT(port);
+		if (!(reg & BIT(cpu_port)))
+			reg |= BIT(cpu_port);
+		b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
+	} else {
+		b53_get_vlan_entry(dev, pvid, vl);
+		vl->members |= BIT(port) | BIT(cpu_port);
+		vl->untag |= BIT(port) | BIT(cpu_port);
+		b53_set_vlan_entry(dev, pvid, vl);
+	}
+}
+EXPORT_SYMBOL(b53_br_leave);
+
+void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state)
+{
+	struct b53_device *dev = ds->priv;
+	u8 hw_state;
+	u8 reg;
+
+	switch (state) {
+	case BR_STATE_DISABLED:
+		hw_state = PORT_CTRL_DIS_STATE;
+		break;
+	case BR_STATE_LISTENING:
+		hw_state = PORT_CTRL_LISTEN_STATE;
+		break;
+	case BR_STATE_LEARNING:
+		hw_state = PORT_CTRL_LEARN_STATE;
+		break;
+	case BR_STATE_FORWARDING:
+		hw_state = PORT_CTRL_FWD_STATE;
+		break;
+	case BR_STATE_BLOCKING:
+		hw_state = PORT_CTRL_BLOCK_STATE;
+		break;
+	default:
+		dev_err(ds->dev, "invalid STP state: %d\n", state);
+		return;
+	}
+
+	b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), &reg);
+	reg &= ~PORT_CTRL_STP_STATE_MASK;
+	reg |= hw_state;
+	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
+}
+EXPORT_SYMBOL(b53_br_set_stp_state);
+
+void b53_br_fast_age(struct dsa_switch *ds, int port)
+{
+	struct b53_device *dev = ds->priv;
+
+	if (b53_fast_age_port(dev, port))
+		dev_err(ds->dev, "fast ageing failed\n");
+}
+EXPORT_SYMBOL(b53_br_fast_age);
+
+int b53_br_flags_pre(struct dsa_switch *ds, int port,
+		     struct switchdev_brport_flags flags,
+		     struct netlink_ext_ack *extack)
+{
+	if (flags.mask & ~(BR_FLOOD | BR_MCAST_FLOOD | BR_LEARNING))
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL(b53_br_flags_pre);
+
+int b53_br_flags(struct dsa_switch *ds, int port,
+		 struct switchdev_brport_flags flags,
+		 struct netlink_ext_ack *extack)
+{
+	if (flags.mask & BR_FLOOD)
+		b53_port_set_ucast_flood(ds->priv, port,
+					 !!(flags.val & BR_FLOOD));
+	if (flags.mask & BR_MCAST_FLOOD)
+		b53_port_set_mcast_flood(ds->priv, port,
+					 !!(flags.val & BR_MCAST_FLOOD));
+	if (flags.mask & BR_LEARNING)
+		b53_port_set_learning(ds->priv, port,
+				      !!(flags.val & BR_LEARNING));
+
+	return 0;
+}
+EXPORT_SYMBOL(b53_br_flags);
+
+static bool b53_possible_cpu_port(struct dsa_switch *ds, int port)
+{
+	/* Broadcom switches will accept enabling Broadcom tags on the
+	 * following ports: 5, 7 and 8, any other port is not supported
+	 */
+	switch (port) {
+	case B53_CPU_PORT_25:
+	case 7:
+	case B53_CPU_PORT:
+		return true;
+	}
+
+	return false;
+}
+
+static bool b53_can_enable_brcm_tags(struct dsa_switch *ds, int port,
+				     enum dsa_tag_protocol tag_protocol)
+{
+	bool ret = b53_possible_cpu_port(ds, port);
+
+	if (!ret) {
+		dev_warn(ds->dev, "Port %d is not Broadcom tag capable\n",
+			 port);
+		return ret;
+	}
+
+	switch (tag_protocol) {
+	case DSA_TAG_PROTO_BRCM:
+	case DSA_TAG_PROTO_BRCM_PREPEND:
+		dev_warn(ds->dev,
+			 "Port %d is stacked to Broadcom tag switch\n", port);
+		ret = false;
+		break;
+	default:
+		ret = true;
+		break;
+	}
+
+	return ret;
+}
+
+enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port,
+					   enum dsa_tag_protocol mprot)
+{
+	struct b53_device *dev = ds->priv;
+
+	if (!b53_can_enable_brcm_tags(ds, port, mprot)) {
+		dev->tag_protocol = DSA_TAG_PROTO_NONE;
+		goto out;
+	}
+
+	/* Older models require a different 6 byte tag */
+	if (is5325(dev) || is5365(dev) || is63xx(dev)) {
+		dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY;
+		goto out;
+	}
+
+	/* Broadcom BCM58xx chips have a flow accelerator on Port 8
+	 * which requires us to use the prepended Broadcom tag type
+	 */
+	if (dev->chip_id == BCM58XX_DEVICE_ID && port == B53_CPU_PORT) {
+		dev->tag_protocol = DSA_TAG_PROTO_BRCM_PREPEND;
+		goto out;
+	}
+
+	dev->tag_protocol = DSA_TAG_PROTO_BRCM;
+out:
+	return dev->tag_protocol;
+}
+EXPORT_SYMBOL(b53_get_tag_protocol);
+
+int b53_mirror_add(struct dsa_switch *ds, int port,
+		   struct dsa_mall_mirror_tc_entry *mirror, bool ingress,
+		   struct netlink_ext_ack *extack)
+{
+	struct b53_device *dev = ds->priv;
+	u16 reg, loc;
+
+	if (ingress)
+		loc = B53_IG_MIR_CTL;
+	else
+		loc = B53_EG_MIR_CTL;
+
+	b53_read16(dev, B53_MGMT_PAGE, loc, &reg);
+	reg |= BIT(port);
+	b53_write16(dev, B53_MGMT_PAGE, loc, reg);
+
+	b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, &reg);
+	reg &= ~CAP_PORT_MASK;
+	reg |= mirror->to_local_port;
+	reg |= MIRROR_EN;
+	b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
+
+	return 0;
+}
+EXPORT_SYMBOL(b53_mirror_add);
+
+void b53_mirror_del(struct dsa_switch *ds, int port,
+		    struct dsa_mall_mirror_tc_entry *mirror)
+{
+	struct b53_device *dev = ds->priv;
+	bool loc_disable = false, other_loc_disable = false;
+	u16 reg, loc;
+
+	if (mirror->ingress)
+		loc = B53_IG_MIR_CTL;
+	else
+		loc = B53_EG_MIR_CTL;
+
+	/* Update the desired ingress/egress register */
+	b53_read16(dev, B53_MGMT_PAGE, loc, &reg);
+	reg &= ~BIT(port);
+	if (!(reg & MIRROR_MASK))
+		loc_disable = true;
+	b53_write16(dev, B53_MGMT_PAGE, loc, reg);
+
+	/* Now look at the other one to know if we can disable mirroring
+	 * entirely
+	 */
+	if (mirror->ingress)
+		b53_read16(dev, B53_MGMT_PAGE, B53_EG_MIR_CTL, &reg);
+	else
+		b53_read16(dev, B53_MGMT_PAGE, B53_IG_MIR_CTL, &reg);
+	if (!(reg & MIRROR_MASK))
+		other_loc_disable = true;
+
+	b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, &reg);
+	/* Both no longer have ports, let's disable mirroring */
+	if (loc_disable && other_loc_disable) {
+		reg &= ~MIRROR_EN;
+		reg &= ~mirror->to_local_port;
+	}
+	b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
+}
+EXPORT_SYMBOL(b53_mirror_del);
+
+void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
+{
+	struct b53_device *dev = ds->priv;
+	u16 reg;
+
+	b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, &reg);
+	if (enable)
+		reg |= BIT(port);
+	else
+		reg &= ~BIT(port);
+	b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg);
+}
+EXPORT_SYMBOL(b53_eee_enable_set);
+
+
+/* Returns 0 if EEE was not enabled, or 1 otherwise
+ */
+int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy)
+{
+	int ret;
+
+	ret = phy_init_eee(phy, false);
+	if (ret)
+		return 0;
+
+	b53_eee_enable_set(ds, port, true);
+
+	return 1;
+}
+EXPORT_SYMBOL(b53_eee_init);
+
+int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
+{
+	struct b53_device *dev = ds->priv;
+	struct ethtool_eee *p = &dev->ports[port].eee;
+	u16 reg;
+
+	if (is5325(dev) || is5365(dev))
+		return -EOPNOTSUPP;
+
+	b53_read16(dev, B53_EEE_PAGE, B53_EEE_LPI_INDICATE, &reg);
+	e->eee_enabled = p->eee_enabled;
+	e->eee_active = !!(reg & BIT(port));
+
+	return 0;
+}
+EXPORT_SYMBOL(b53_get_mac_eee);
+
+int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
+{
+	struct b53_device *dev = ds->priv;
+	struct ethtool_eee *p = &dev->ports[port].eee;
+
+	if (is5325(dev) || is5365(dev))
+		return -EOPNOTSUPP;
+
+	p->eee_enabled = e->eee_enabled;
+	b53_eee_enable_set(ds, port, e->eee_enabled);
+
+	return 0;
+}
+EXPORT_SYMBOL(b53_set_mac_eee);
+
+static int b53_change_mtu(struct dsa_switch *ds, int port, int mtu)
+{
+	struct b53_device *dev = ds->priv;
+	bool enable_jumbo;
+	bool allow_10_100;
+
+	if (is5325(dev) || is5365(dev))
+		return -EOPNOTSUPP;
+
+	enable_jumbo = (mtu >= JMS_MIN_SIZE);
+	allow_10_100 = (dev->chip_id == BCM583XX_DEVICE_ID);
+
+	return b53_set_jumbo(dev, enable_jumbo, allow_10_100);
+}
+
+static int b53_get_max_mtu(struct dsa_switch *ds, int port)
+{
+	return JMS_MAX_SIZE;
+}
+
+static const struct dsa_switch_ops b53_switch_ops = {
+	.get_tag_protocol	= b53_get_tag_protocol,
+	.setup			= b53_setup,
+	.teardown		= b53_teardown,
+	.get_strings		= b53_get_strings,
+	.get_ethtool_stats	= b53_get_ethtool_stats,
+	.get_sset_count		= b53_get_sset_count,
+	.get_ethtool_phy_stats	= b53_get_ethtool_phy_stats,
+	.phy_read		= b53_phy_read16,
+	.phy_write		= b53_phy_write16,
+	.adjust_link		= b53_adjust_link,
+	.phylink_get_caps	= b53_phylink_get_caps,
+	.phylink_mac_select_pcs	= b53_phylink_mac_select_pcs,
+	.phylink_mac_config	= b53_phylink_mac_config,
+	.phylink_mac_link_down	= b53_phylink_mac_link_down,
+	.phylink_mac_link_up	= b53_phylink_mac_link_up,
+	.port_enable		= b53_enable_port,
+	.port_disable		= b53_disable_port,
+	.get_mac_eee		= b53_get_mac_eee,
+	.set_mac_eee		= b53_set_mac_eee,
+	.port_bridge_join	= b53_br_join,
+	.port_bridge_leave	= b53_br_leave,
+	.port_pre_bridge_flags	= b53_br_flags_pre,
+	.port_bridge_flags	= b53_br_flags,
+	.port_stp_state_set	= b53_br_set_stp_state,
+	.port_fast_age		= b53_br_fast_age,
+	.port_vlan_filtering	= b53_vlan_filtering,
+	.port_vlan_add		= b53_vlan_add,
+	.port_vlan_del		= b53_vlan_del,
+	.port_fdb_dump		= b53_fdb_dump,
+	.port_fdb_add		= b53_fdb_add,
+	.port_fdb_del		= b53_fdb_del,
+	.port_mirror_add	= b53_mirror_add,
+	.port_mirror_del	= b53_mirror_del,
+	.port_mdb_add		= b53_mdb_add,
+	.port_mdb_del		= b53_mdb_del,
+	.port_max_mtu		= b53_get_max_mtu,
+	.port_change_mtu	= b53_change_mtu,
+};
+
+struct b53_chip_data {
+	u32 chip_id;
+	const char *dev_name;
+	u16 vlans;
+	u16 enabled_ports;
+	u8 imp_port;
+	u8 cpu_port;
+	u8 vta_regs[3];
+	u8 arl_bins;
+	u16 arl_buckets;
+	u8 duplex_reg;
+	u8 jumbo_pm_reg;
+	u8 jumbo_size_reg;
+};
+
+#define B53_VTA_REGS	\
+	{ B53_VT_ACCESS, B53_VT_INDEX, B53_VT_ENTRY }
+#define B53_VTA_REGS_9798 \
+	{ B53_VT_ACCESS_9798, B53_VT_INDEX_9798, B53_VT_ENTRY_9798 }
+#define B53_VTA_REGS_63XX \
+	{ B53_VT_ACCESS_63XX, B53_VT_INDEX_63XX, B53_VT_ENTRY_63XX }
+
+static const struct b53_chip_data b53_switch_chips[] = {
+	{
+		.chip_id = BCM5325_DEVICE_ID,
+		.dev_name = "BCM5325",
+		.vlans = 16,
+		.enabled_ports = 0x3f,
+		.arl_bins = 2,
+		.arl_buckets = 1024,
+		.imp_port = 5,
+		.duplex_reg = B53_DUPLEX_STAT_FE,
+	},
+	{
+		.chip_id = BCM5365_DEVICE_ID,
+		.dev_name = "BCM5365",
+		.vlans = 256,
+		.enabled_ports = 0x3f,
+		.arl_bins = 2,
+		.arl_buckets = 1024,
+		.imp_port = 5,
+		.duplex_reg = B53_DUPLEX_STAT_FE,
+	},
+	{
+		.chip_id = BCM5389_DEVICE_ID,
+		.dev_name = "BCM5389",
+		.vlans = 4096,
+		.enabled_ports = 0x11f,
+		.arl_bins = 4,
+		.arl_buckets = 1024,
+		.imp_port = 8,
+		.vta_regs = B53_VTA_REGS,
+		.duplex_reg = B53_DUPLEX_STAT_GE,
+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+	},
+	{
+		.chip_id = BCM5395_DEVICE_ID,
+		.dev_name = "BCM5395",
+		.vlans = 4096,
+		.enabled_ports = 0x11f,
+		.arl_bins = 4,
+		.arl_buckets = 1024,
+		.imp_port = 8,
+		.vta_regs = B53_VTA_REGS,
+		.duplex_reg = B53_DUPLEX_STAT_GE,
+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+	},
+	{
+		.chip_id = BCM5397_DEVICE_ID,
+		.dev_name = "BCM5397",
+		.vlans = 4096,
+		.enabled_ports = 0x11f,
+		.arl_bins = 4,
+		.arl_buckets = 1024,
+		.imp_port = 8,
+		.vta_regs = B53_VTA_REGS_9798,
+		.duplex_reg = B53_DUPLEX_STAT_GE,
+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+	},
+	{
+		.chip_id = BCM5398_DEVICE_ID,
+		.dev_name = "BCM5398",
+		.vlans = 4096,
+		.enabled_ports = 0x17f,
+		.arl_bins = 4,
+		.arl_buckets = 1024,
+		.imp_port = 8,
+		.vta_regs = B53_VTA_REGS_9798,
+		.duplex_reg = B53_DUPLEX_STAT_GE,
+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+	},
+	{
+		.chip_id = BCM53115_DEVICE_ID,
+		.dev_name = "BCM53115",
+		.vlans = 4096,
+		.enabled_ports = 0x11f,
+		.arl_bins = 4,
+		.arl_buckets = 1024,
+		.vta_regs = B53_VTA_REGS,
+		.imp_port = 8,
+		.duplex_reg = B53_DUPLEX_STAT_GE,
+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+	},
+	{
+		.chip_id = BCM53125_DEVICE_ID,
+		.dev_name = "BCM53125",
+		.vlans = 4096,
+		.enabled_ports = 0x1ff,
+		.arl_bins = 4,
+		.arl_buckets = 1024,
+		.imp_port = 8,
+		.vta_regs = B53_VTA_REGS,
+		.duplex_reg = B53_DUPLEX_STAT_GE,
+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+	},
+	{
+		.chip_id = BCM53128_DEVICE_ID,
+		.dev_name = "BCM53128",
+		.vlans = 4096,
+		.enabled_ports = 0x1ff,
+		.arl_bins = 4,
+		.arl_buckets = 1024,
+		.imp_port = 8,
+		.vta_regs = B53_VTA_REGS,
+		.duplex_reg = B53_DUPLEX_STAT_GE,
+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+	},
+	{
+		.chip_id = BCM63XX_DEVICE_ID,
+		.dev_name = "BCM63xx",
+		.vlans = 4096,
+		.enabled_ports = 0, /* pdata must provide them */
+		.arl_bins = 4,
+		.arl_buckets = 1024,
+		.imp_port = 8,
+		.vta_regs = B53_VTA_REGS_63XX,
+		.duplex_reg = B53_DUPLEX_STAT_63XX,
+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
+	},
+	{
+		.chip_id = BCM53010_DEVICE_ID,
+		.dev_name = "BCM53010",
+		.vlans = 4096,
+		.enabled_ports = 0x1bf,
+		.arl_bins = 4,
+		.arl_buckets = 1024,
+		.imp_port = 8,
+		.vta_regs = B53_VTA_REGS,
+		.duplex_reg = B53_DUPLEX_STAT_GE,
+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+	},
+	{
+		.chip_id = BCM53011_DEVICE_ID,
+		.dev_name = "BCM53011",
+		.vlans = 4096,
+		.enabled_ports = 0x1bf,
+		.arl_bins = 4,
+		.arl_buckets = 1024,
+		.imp_port = 8,
+		.vta_regs = B53_VTA_REGS,
+		.duplex_reg = B53_DUPLEX_STAT_GE,
+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+	},
+	{
+		.chip_id = BCM53012_DEVICE_ID,
+		.dev_name = "BCM53012",
+		.vlans = 4096,
+		.enabled_ports = 0x1bf,
+		.arl_bins = 4,
+		.arl_buckets = 1024,
+		.imp_port = 8,
+		.vta_regs = B53_VTA_REGS,
+		.duplex_reg = B53_DUPLEX_STAT_GE,
+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+	},
+	{
+		.chip_id = BCM53018_DEVICE_ID,
+		.dev_name = "BCM53018",
+		.vlans = 4096,
+		.enabled_ports = 0x1bf,
+		.arl_bins = 4,
+		.arl_buckets = 1024,
+		.imp_port = 8,
+		.vta_regs = B53_VTA_REGS,
+		.duplex_reg = B53_DUPLEX_STAT_GE,
+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+	},
+	{
+		.chip_id = BCM53019_DEVICE_ID,
+		.dev_name = "BCM53019",
+		.vlans = 4096,
+		.enabled_ports = 0x1bf,
+		.arl_bins = 4,
+		.arl_buckets = 1024,
+		.imp_port = 8,
+		.vta_regs = B53_VTA_REGS,
+		.duplex_reg = B53_DUPLEX_STAT_GE,
+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+	},
+	{
+		.chip_id = BCM58XX_DEVICE_ID,
+		.dev_name = "BCM585xx/586xx/88312",
+		.vlans	= 4096,
+		.enabled_ports = 0x1ff,
+		.arl_bins = 4,
+		.arl_buckets = 1024,
+		.imp_port = 8,
+		.vta_regs = B53_VTA_REGS,
+		.duplex_reg = B53_DUPLEX_STAT_GE,
+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+	},
+	{
+		.chip_id = BCM583XX_DEVICE_ID,
+		.dev_name = "BCM583xx/11360",
+		.vlans = 4096,
+		.enabled_ports = 0x103,
+		.arl_bins = 4,
+		.arl_buckets = 1024,
+		.imp_port = 8,
+		.vta_regs = B53_VTA_REGS,
+		.duplex_reg = B53_DUPLEX_STAT_GE,
+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+	},
+	/* Starfighter 2 */
+	{
+		.chip_id = BCM4908_DEVICE_ID,
+		.dev_name = "BCM4908",
+		.vlans = 4096,
+		.enabled_ports = 0x1bf,
+		.arl_bins = 4,
+		.arl_buckets = 256,
+		.imp_port = 8,
+		.vta_regs = B53_VTA_REGS,
+		.duplex_reg = B53_DUPLEX_STAT_GE,
+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+	},
+	{
+		.chip_id = BCM7445_DEVICE_ID,
+		.dev_name = "BCM7445",
+		.vlans	= 4096,
+		.enabled_ports = 0x1ff,
+		.arl_bins = 4,
+		.arl_buckets = 1024,
+		.imp_port = 8,
+		.vta_regs = B53_VTA_REGS,
+		.duplex_reg = B53_DUPLEX_STAT_GE,
+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+	},
+	{
+		.chip_id = BCM7278_DEVICE_ID,
+		.dev_name = "BCM7278",
+		.vlans = 4096,
+		.enabled_ports = 0x1ff,
+		.arl_bins = 4,
+		.arl_buckets = 256,
+		.imp_port = 8,
+		.vta_regs = B53_VTA_REGS,
+		.duplex_reg = B53_DUPLEX_STAT_GE,
+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+	},
+};
+
+static int b53_switch_init(struct b53_device *dev)
+{
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) {
+		const struct b53_chip_data *chip = &b53_switch_chips[i];
+
+		if (chip->chip_id == dev->chip_id) {
+			if (!dev->enabled_ports)
+				dev->enabled_ports = chip->enabled_ports;
+			dev->name = chip->dev_name;
+			dev->duplex_reg = chip->duplex_reg;
+			dev->vta_regs[0] = chip->vta_regs[0];
+			dev->vta_regs[1] = chip->vta_regs[1];
+			dev->vta_regs[2] = chip->vta_regs[2];
+			dev->jumbo_pm_reg = chip->jumbo_pm_reg;
+			dev->imp_port = chip->imp_port;
+			dev->num_vlans = chip->vlans;
+			dev->num_arl_bins = chip->arl_bins;
+			dev->num_arl_buckets = chip->arl_buckets;
+			break;
+		}
+	}
+
+	/* check which BCM5325x version we have */
+	if (is5325(dev)) {
+		u8 vc4;
+
+		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
+
+		/* check reserved bits */
+		switch (vc4 & 3) {
+		case 1:
+			/* BCM5325E */
+			break;
+		case 3:
+			/* BCM5325F - do not use port 4 */
+			dev->enabled_ports &= ~BIT(4);
+			break;
+		default:
+/* On the BCM47XX SoCs this is the supported internal switch.*/
+#ifndef CONFIG_BCM47XX
+			/* BCM5325M */
+			return -EINVAL;
+#else
+			break;
+#endif
+		}
+	}
+
+	dev->num_ports = fls(dev->enabled_ports);
+
+	dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS);
+
+	/* Include non standard CPU port built-in PHYs to be probed */
+	if (is539x(dev) || is531x5(dev)) {
+		for (i = 0; i < dev->num_ports; i++) {
+			if (!(dev->ds->phys_mii_mask & BIT(i)) &&
+			    !b53_possible_cpu_port(dev->ds, i))
+				dev->ds->phys_mii_mask |= BIT(i);
+		}
+	}
+
+	dev->ports = devm_kcalloc(dev->dev,
+				  dev->num_ports, sizeof(struct b53_port),
+				  GFP_KERNEL);
+	if (!dev->ports)
+		return -ENOMEM;
+
+	dev->vlans = devm_kcalloc(dev->dev,
+				  dev->num_vlans, sizeof(struct b53_vlan),
+				  GFP_KERNEL);
+	if (!dev->vlans)
+		return -ENOMEM;
+
+	dev->reset_gpio = b53_switch_get_reset_gpio(dev);
+	if (dev->reset_gpio >= 0) {
+		ret = devm_gpio_request_one(dev->dev, dev->reset_gpio,
+					    GPIOF_OUT_INIT_HIGH, "robo_reset");
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+struct b53_device *b53_switch_alloc(struct device *base,
+				    const struct b53_io_ops *ops,
+				    void *priv)
+{
+	struct dsa_switch *ds;
+	struct b53_device *dev;
+
+	ds = devm_kzalloc(base, sizeof(*ds), GFP_KERNEL);
+	if (!ds)
+		return NULL;
+
+	ds->dev = base;
+
+	dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return NULL;
+
+	ds->priv = dev;
+	dev->dev = base;
+
+	dev->ds = ds;
+	dev->priv = priv;
+	dev->ops = ops;
+	ds->ops = &b53_switch_ops;
+	dev->vlan_enabled = true;
+	/* Let DSA handle the case were multiple bridges span the same switch
+	 * device and different VLAN awareness settings are requested, which
+	 * would be breaking filtering semantics for any of the other bridge
+	 * devices. (not hardware supported)
+	 */
+	ds->vlan_filtering_is_global = true;
+
+	mutex_init(&dev->reg_mutex);
+	mutex_init(&dev->stats_mutex);
+	mutex_init(&dev->arl_mutex);
+
+	return dev;
+}
+EXPORT_SYMBOL(b53_switch_alloc);
+
+int b53_switch_detect(struct b53_device *dev)
+{
+	u32 id32;
+	u16 tmp;
+	u8 id8;
+	int ret;
+
+	ret = b53_read8(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id8);
+	if (ret)
+		return ret;
+
+	switch (id8) {
+	case 0:
+		/* BCM5325 and BCM5365 do not have this register so reads
+		 * return 0. But the read operation did succeed, so assume this
+		 * is one of them.
+		 *
+		 * Next check if we can write to the 5325's VTA register; for
+		 * 5365 it is read only.
+		 */
+		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf);
+		b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp);
+
+		if (tmp == 0xf)
+			dev->chip_id = BCM5325_DEVICE_ID;
+		else
+			dev->chip_id = BCM5365_DEVICE_ID;
+		break;
+	case BCM5389_DEVICE_ID:
+	case BCM5395_DEVICE_ID:
+	case BCM5397_DEVICE_ID:
+	case BCM5398_DEVICE_ID:
+		dev->chip_id = id8;
+		break;
+	default:
+		ret = b53_read32(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id32);
+		if (ret)
+			return ret;
+
+		switch (id32) {
+		case BCM53115_DEVICE_ID:
+		case BCM53125_DEVICE_ID:
+		case BCM53128_DEVICE_ID:
+		case BCM53010_DEVICE_ID:
+		case BCM53011_DEVICE_ID:
+		case BCM53012_DEVICE_ID:
+		case BCM53018_DEVICE_ID:
+		case BCM53019_DEVICE_ID:
+			dev->chip_id = id32;
+			break;
+		default:
+			dev_err(dev->dev,
+				"unsupported switch detected (BCM53%02x/BCM%x)\n",
+				id8, id32);
+			return -ENODEV;
+		}
+	}
+
+	if (dev->chip_id == BCM5325_DEVICE_ID)
+		return b53_read8(dev, B53_STAT_PAGE, B53_REV_ID_25,
+				 &dev->core_rev);
+	else
+		return b53_read8(dev, B53_MGMT_PAGE, B53_REV_ID,
+				 &dev->core_rev);
+}
+EXPORT_SYMBOL(b53_switch_detect);
+
+int b53_switch_register(struct b53_device *dev)
+{
+	int ret;
+
+	if (dev->pdata) {
+		dev->chip_id = dev->pdata->chip_id;
+		dev->enabled_ports = dev->pdata->enabled_ports;
+	}
+
+	if (!dev->chip_id && b53_switch_detect(dev))
+		return -EINVAL;
+
+	ret = b53_switch_init(dev);
+	if (ret)
+		return ret;
+
+	dev_info(dev->dev, "found switch: %s, rev %i\n",
+		 dev->name, dev->core_rev);
+
+	return dsa_register_switch(dev->ds);
+}
+EXPORT_SYMBOL(b53_switch_register);
+
+MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
+MODULE_DESCRIPTION("B53 switch library");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/dsa/b53/b53_mdio.c b/drivers/net/dsa/b53/b53_mdio.c
new file mode 100644
index 000000000..6ddc03b58
--- /dev/null
+++ b/drivers/net/dsa/b53/b53_mdio.c
@@ -0,0 +1,399 @@
+/*
+ * B53 register access through MII registers
+ *
+ * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/phy.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/brcmphy.h>
+#include <linux/rtnetlink.h>
+#include <net/dsa.h>
+
+#include "b53_priv.h"
+
+/* MII registers */
+#define REG_MII_PAGE    0x10    /* MII Page register */
+#define REG_MII_ADDR    0x11    /* MII Address register */
+#define REG_MII_DATA0   0x18    /* MII Data register 0 */
+#define REG_MII_DATA1   0x19    /* MII Data register 1 */
+#define REG_MII_DATA2   0x1a    /* MII Data register 2 */
+#define REG_MII_DATA3   0x1b    /* MII Data register 3 */
+
+#define REG_MII_PAGE_ENABLE     BIT(0)
+#define REG_MII_ADDR_WRITE      BIT(0)
+#define REG_MII_ADDR_READ       BIT(1)
+
+static int b53_mdio_op(struct b53_device *dev, u8 page, u8 reg, u16 op)
+{
+	int i;
+	u16 v;
+	int ret;
+	struct mii_bus *bus = dev->priv;
+
+	if (dev->current_page != page) {
+		/* set page number */
+		v = (page << 8) | REG_MII_PAGE_ENABLE;
+		ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
+					   REG_MII_PAGE, v);
+		if (ret)
+			return ret;
+		dev->current_page = page;
+	}
+
+	/* set register address */
+	v = (reg << 8) | op;
+	ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_ADDR, v);
+	if (ret)
+		return ret;
+
+	/* check if operation completed */
+	for (i = 0; i < 5; ++i) {
+		v = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
+					REG_MII_ADDR);
+		if (!(v & (REG_MII_ADDR_WRITE | REG_MII_ADDR_READ)))
+			break;
+		usleep_range(10, 100);
+	}
+
+	if (WARN_ON(i == 5))
+		return -EIO;
+
+	return 0;
+}
+
+static int b53_mdio_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
+{
+	struct mii_bus *bus = dev->priv;
+	int ret;
+
+	ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
+	if (ret)
+		return ret;
+
+	*val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
+				   REG_MII_DATA0) & 0xff;
+
+	return 0;
+}
+
+static int b53_mdio_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
+{
+	struct mii_bus *bus = dev->priv;
+	int ret;
+
+	ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
+	if (ret)
+		return ret;
+
+	*val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_DATA0);
+
+	return 0;
+}
+
+static int b53_mdio_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
+{
+	struct mii_bus *bus = dev->priv;
+	int ret;
+
+	ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
+	if (ret)
+		return ret;
+
+	*val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_DATA0);
+	*val |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
+				    REG_MII_DATA1) << 16;
+
+	return 0;
+}
+
+static int b53_mdio_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+	struct mii_bus *bus = dev->priv;
+	u64 temp = 0;
+	int i;
+	int ret;
+
+	ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
+	if (ret)
+		return ret;
+
+	for (i = 2; i >= 0; i--) {
+		temp <<= 16;
+		temp |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
+				     REG_MII_DATA0 + i);
+	}
+
+	*val = temp;
+
+	return 0;
+}
+
+static int b53_mdio_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+	struct mii_bus *bus = dev->priv;
+	u64 temp = 0;
+	int i;
+	int ret;
+
+	ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
+	if (ret)
+		return ret;
+
+	for (i = 3; i >= 0; i--) {
+		temp <<= 16;
+		temp |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
+					    REG_MII_DATA0 + i);
+	}
+
+	*val = temp;
+
+	return 0;
+}
+
+static int b53_mdio_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
+{
+	struct mii_bus *bus = dev->priv;
+	int ret;
+
+	ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
+				   REG_MII_DATA0, value);
+	if (ret)
+		return ret;
+
+	return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
+}
+
+static int b53_mdio_write16(struct b53_device *dev, u8 page, u8 reg,
+			    u16 value)
+{
+	struct mii_bus *bus = dev->priv;
+	int ret;
+
+	ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
+				   REG_MII_DATA0, value);
+	if (ret)
+		return ret;
+
+	return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
+}
+
+static int b53_mdio_write32(struct b53_device *dev, u8 page, u8 reg,
+			    u32 value)
+{
+	struct mii_bus *bus = dev->priv;
+	unsigned int i;
+	u32 temp = value;
+
+	for (i = 0; i < 2; i++) {
+		int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
+					       REG_MII_DATA0 + i,
+					       temp & 0xffff);
+		if (ret)
+			return ret;
+		temp >>= 16;
+	}
+
+	return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
+}
+
+static int b53_mdio_write48(struct b53_device *dev, u8 page, u8 reg,
+			    u64 value)
+{
+	struct mii_bus *bus = dev->priv;
+	unsigned int i;
+	u64 temp = value;
+
+	for (i = 0; i < 3; i++) {
+		int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
+					       REG_MII_DATA0 + i,
+					       temp & 0xffff);
+		if (ret)
+			return ret;
+		temp >>= 16;
+	}
+
+	return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
+}
+
+static int b53_mdio_write64(struct b53_device *dev, u8 page, u8 reg,
+			    u64 value)
+{
+	struct mii_bus *bus = dev->priv;
+	unsigned int i;
+	u64 temp = value;
+
+	for (i = 0; i < 4; i++) {
+		int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
+					       REG_MII_DATA0 + i,
+					       temp & 0xffff);
+		if (ret)
+			return ret;
+		temp >>= 16;
+	}
+
+	return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
+}
+
+static int b53_mdio_phy_read16(struct b53_device *dev, int addr, int reg,
+			       u16 *value)
+{
+	struct mii_bus *bus = dev->priv;
+
+	*value = mdiobus_read_nested(bus, addr, reg);
+
+	return 0;
+}
+
+static int b53_mdio_phy_write16(struct b53_device *dev, int addr, int reg,
+				u16 value)
+{
+	struct mii_bus *bus = dev->bus;
+
+	return mdiobus_write_nested(bus, addr, reg, value);
+}
+
+static const struct b53_io_ops b53_mdio_ops = {
+	.read8 = b53_mdio_read8,
+	.read16 = b53_mdio_read16,
+	.read32 = b53_mdio_read32,
+	.read48 = b53_mdio_read48,
+	.read64 = b53_mdio_read64,
+	.write8 = b53_mdio_write8,
+	.write16 = b53_mdio_write16,
+	.write32 = b53_mdio_write32,
+	.write48 = b53_mdio_write48,
+	.write64 = b53_mdio_write64,
+	.phy_read16 = b53_mdio_phy_read16,
+	.phy_write16 = b53_mdio_phy_write16,
+};
+
+#define B53_BRCM_OUI_1	0x0143bc00
+#define B53_BRCM_OUI_2	0x03625c00
+#define B53_BRCM_OUI_3	0x00406000
+#define B53_BRCM_OUI_4	0x01410c00
+
+static int b53_mdio_probe(struct mdio_device *mdiodev)
+{
+	struct b53_device *dev;
+	u32 phy_id;
+	int ret;
+
+	/* allow the generic PHY driver to take over the non-management MDIO
+	 * addresses
+	 */
+	if (mdiodev->addr != BRCM_PSEUDO_PHY_ADDR && mdiodev->addr != 0) {
+		dev_err(&mdiodev->dev, "leaving address %d to PHY\n",
+			mdiodev->addr);
+		return -ENODEV;
+	}
+
+	/* read the first port's id */
+	phy_id = mdiobus_read(mdiodev->bus, 0, 2) << 16;
+	phy_id |= mdiobus_read(mdiodev->bus, 0, 3);
+
+	/* BCM5325, BCM539x (OUI_1)
+	 * BCM53125, BCM53128 (OUI_2)
+	 * BCM5365 (OUI_3)
+	 */
+	if ((phy_id & 0xfffffc00) != B53_BRCM_OUI_1 &&
+	    (phy_id & 0xfffffc00) != B53_BRCM_OUI_2 &&
+	    (phy_id & 0xfffffc00) != B53_BRCM_OUI_3 &&
+	    (phy_id & 0xfffffc00) != B53_BRCM_OUI_4) {
+		dev_err(&mdiodev->dev, "Unsupported device: 0x%08x\n", phy_id);
+		return -ENODEV;
+	}
+
+	/* First probe will come from SWITCH_MDIO controller on the 7445D0
+	 * switch, which will conflict with the 7445 integrated switch
+	 * pseudo-phy (we end-up programming both). In that case, we return
+	 * -EPROBE_DEFER for the first time we get here, and wait until we come
+	 * back with the slave MDIO bus which has the correct indirection
+	 * layer setup
+	 */
+	if (of_machine_is_compatible("brcm,bcm7445d0") &&
+	    strcmp(mdiodev->bus->name, "sf2 slave mii"))
+		return -EPROBE_DEFER;
+
+	dev = b53_switch_alloc(&mdiodev->dev, &b53_mdio_ops, mdiodev->bus);
+	if (!dev)
+		return -ENOMEM;
+
+	/* we don't use page 0xff, so force a page set */
+	dev->current_page = 0xff;
+	dev->bus = mdiodev->bus;
+
+	dev_set_drvdata(&mdiodev->dev, dev);
+
+	ret = b53_switch_register(dev);
+	if (ret) {
+		dev_err(&mdiodev->dev, "failed to register switch: %i\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static void b53_mdio_remove(struct mdio_device *mdiodev)
+{
+	struct b53_device *dev = dev_get_drvdata(&mdiodev->dev);
+
+	if (!dev)
+		return;
+
+	b53_switch_remove(dev);
+}
+
+static void b53_mdio_shutdown(struct mdio_device *mdiodev)
+{
+	struct b53_device *dev = dev_get_drvdata(&mdiodev->dev);
+
+	if (!dev)
+		return;
+
+	b53_switch_shutdown(dev);
+
+	dev_set_drvdata(&mdiodev->dev, NULL);
+}
+
+static const struct of_device_id b53_of_match[] = {
+	{ .compatible = "brcm,bcm5325" },
+	{ .compatible = "brcm,bcm53115" },
+	{ .compatible = "brcm,bcm53125" },
+	{ .compatible = "brcm,bcm53128" },
+	{ .compatible = "brcm,bcm5365" },
+	{ .compatible = "brcm,bcm5389" },
+	{ .compatible = "brcm,bcm5395" },
+	{ .compatible = "brcm,bcm5397" },
+	{ .compatible = "brcm,bcm5398" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, b53_of_match);
+
+static struct mdio_driver b53_mdio_driver = {
+	.probe	= b53_mdio_probe,
+	.remove	= b53_mdio_remove,
+	.shutdown = b53_mdio_shutdown,
+	.mdiodrv.driver = {
+		.name = "bcm53xx",
+		.of_match_table = b53_of_match,
+	},
+};
+mdio_module_driver(b53_mdio_driver);
+
+MODULE_DESCRIPTION("B53 MDIO access driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/dsa/b53/b53_mmap.c b/drivers/net/dsa/b53/b53_mmap.c
new file mode 100644
index 000000000..d9434ed94
--- /dev/null
+++ b/drivers/net/dsa/b53/b53_mmap.c
@@ -0,0 +1,368 @@
+/*
+ * B53 register access through memory mapped registers
+ *
+ * Copyright (C) 2012-2013 Jonas Gorski <jogo@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/bits.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/b53.h>
+
+#include "b53_priv.h"
+
+struct b53_mmap_priv {
+	void __iomem *regs;
+};
+
+static int b53_mmap_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
+{
+	struct b53_mmap_priv *priv = dev->priv;
+	void __iomem *regs = priv->regs;
+
+	*val = readb(regs + (page << 8) + reg);
+
+	return 0;
+}
+
+static int b53_mmap_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
+{
+	struct b53_mmap_priv *priv = dev->priv;
+	void __iomem *regs = priv->regs;
+
+	if (WARN_ON(reg % 2))
+		return -EINVAL;
+
+	if (dev->pdata && dev->pdata->big_endian)
+		*val = ioread16be(regs + (page << 8) + reg);
+	else
+		*val = readw(regs + (page << 8) + reg);
+
+	return 0;
+}
+
+static int b53_mmap_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
+{
+	struct b53_mmap_priv *priv = dev->priv;
+	void __iomem *regs = priv->regs;
+
+	if (WARN_ON(reg % 4))
+		return -EINVAL;
+
+	if (dev->pdata && dev->pdata->big_endian)
+		*val = ioread32be(regs + (page << 8) + reg);
+	else
+		*val = readl(regs + (page << 8) + reg);
+
+	return 0;
+}
+
+static int b53_mmap_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+	struct b53_mmap_priv *priv = dev->priv;
+	void __iomem *regs = priv->regs;
+
+	if (WARN_ON(reg % 2))
+		return -EINVAL;
+
+	if (reg % 4) {
+		u16 lo;
+		u32 hi;
+
+		if (dev->pdata && dev->pdata->big_endian) {
+			lo = ioread16be(regs + (page << 8) + reg);
+			hi = ioread32be(regs + (page << 8) + reg + 2);
+		} else {
+			lo = readw(regs + (page << 8) + reg);
+			hi = readl(regs + (page << 8) + reg + 2);
+		}
+
+		*val = ((u64)hi << 16) | lo;
+	} else {
+		u32 lo;
+		u16 hi;
+
+		if (dev->pdata && dev->pdata->big_endian) {
+			lo = ioread32be(regs + (page << 8) + reg);
+			hi = ioread16be(regs + (page << 8) + reg + 4);
+		} else {
+			lo = readl(regs + (page << 8) + reg);
+			hi = readw(regs + (page << 8) + reg + 4);
+		}
+
+		*val = ((u64)hi << 32) | lo;
+	}
+
+	return 0;
+}
+
+static int b53_mmap_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+	struct b53_mmap_priv *priv = dev->priv;
+	void __iomem *regs = priv->regs;
+	u32 hi, lo;
+
+	if (WARN_ON(reg % 4))
+		return -EINVAL;
+
+	if (dev->pdata && dev->pdata->big_endian) {
+		lo = ioread32be(regs + (page << 8) + reg);
+		hi = ioread32be(regs + (page << 8) + reg + 4);
+	} else {
+		lo = readl(regs + (page << 8) + reg);
+		hi = readl(regs + (page << 8) + reg + 4);
+	}
+
+	*val = ((u64)hi << 32) | lo;
+
+	return 0;
+}
+
+static int b53_mmap_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
+{
+	struct b53_mmap_priv *priv = dev->priv;
+	void __iomem *regs = priv->regs;
+
+	writeb(value, regs + (page << 8) + reg);
+
+	return 0;
+}
+
+static int b53_mmap_write16(struct b53_device *dev, u8 page, u8 reg,
+			    u16 value)
+{
+	struct b53_mmap_priv *priv = dev->priv;
+	void __iomem *regs = priv->regs;
+
+	if (WARN_ON(reg % 2))
+		return -EINVAL;
+
+	if (dev->pdata && dev->pdata->big_endian)
+		iowrite16be(value, regs + (page << 8) + reg);
+	else
+		writew(value, regs + (page << 8) + reg);
+
+	return 0;
+}
+
+static int b53_mmap_write32(struct b53_device *dev, u8 page, u8 reg,
+			    u32 value)
+{
+	struct b53_mmap_priv *priv = dev->priv;
+	void __iomem *regs = priv->regs;
+
+	if (WARN_ON(reg % 4))
+		return -EINVAL;
+
+	if (dev->pdata && dev->pdata->big_endian)
+		iowrite32be(value, regs + (page << 8) + reg);
+	else
+		writel(value, regs + (page << 8) + reg);
+
+	return 0;
+}
+
+static int b53_mmap_write48(struct b53_device *dev, u8 page, u8 reg,
+			    u64 value)
+{
+	if (WARN_ON(reg % 2))
+		return -EINVAL;
+
+	if (reg % 4) {
+		u32 hi = (u32)(value >> 16);
+		u16 lo = (u16)value;
+
+		b53_mmap_write16(dev, page, reg, lo);
+		b53_mmap_write32(dev, page, reg + 2, hi);
+	} else {
+		u16 hi = (u16)(value >> 32);
+		u32 lo = (u32)value;
+
+		b53_mmap_write32(dev, page, reg, lo);
+		b53_mmap_write16(dev, page, reg + 4, hi);
+	}
+
+	return 0;
+}
+
+static int b53_mmap_write64(struct b53_device *dev, u8 page, u8 reg,
+			    u64 value)
+{
+	u32 hi, lo;
+
+	hi = upper_32_bits(value);
+	lo = lower_32_bits(value);
+
+	if (WARN_ON(reg % 4))
+		return -EINVAL;
+
+	b53_mmap_write32(dev, page, reg, lo);
+	b53_mmap_write32(dev, page, reg + 4, hi);
+
+	return 0;
+}
+
+static int b53_mmap_phy_read16(struct b53_device *dev, int addr, int reg,
+			       u16 *value)
+{
+	return -EIO;
+}
+
+static int b53_mmap_phy_write16(struct b53_device *dev, int addr, int reg,
+				u16 value)
+{
+	return -EIO;
+}
+
+static const struct b53_io_ops b53_mmap_ops = {
+	.read8 = b53_mmap_read8,
+	.read16 = b53_mmap_read16,
+	.read32 = b53_mmap_read32,
+	.read48 = b53_mmap_read48,
+	.read64 = b53_mmap_read64,
+	.write8 = b53_mmap_write8,
+	.write16 = b53_mmap_write16,
+	.write32 = b53_mmap_write32,
+	.write48 = b53_mmap_write48,
+	.write64 = b53_mmap_write64,
+	.phy_read16 = b53_mmap_phy_read16,
+	.phy_write16 = b53_mmap_phy_write16,
+};
+
+static int b53_mmap_probe_of(struct platform_device *pdev,
+			     struct b53_platform_data **ppdata)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *of_ports, *of_port;
+	struct device *dev = &pdev->dev;
+	struct b53_platform_data *pdata;
+	void __iomem *mem;
+
+	mem = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(mem))
+		return PTR_ERR(mem);
+
+	pdata = devm_kzalloc(dev, sizeof(struct b53_platform_data),
+			     GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	pdata->regs = mem;
+	pdata->chip_id = BCM63XX_DEVICE_ID;
+	pdata->big_endian = of_property_read_bool(np, "big-endian");
+
+	of_ports = of_get_child_by_name(np, "ports");
+	if (!of_ports) {
+		dev_err(dev, "no ports child node found\n");
+		return -EINVAL;
+	}
+
+	for_each_available_child_of_node(of_ports, of_port) {
+		u32 reg;
+
+		if (of_property_read_u32(of_port, "reg", &reg))
+			continue;
+
+		if (reg < B53_N_PORTS)
+			pdata->enabled_ports |= BIT(reg);
+	}
+
+	of_node_put(of_ports);
+	*ppdata = pdata;
+
+	return 0;
+}
+
+static int b53_mmap_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct b53_platform_data *pdata = pdev->dev.platform_data;
+	struct b53_mmap_priv *priv;
+	struct b53_device *dev;
+	int ret;
+
+	if (!pdata && np) {
+		ret = b53_mmap_probe_of(pdev, &pdata);
+		if (ret) {
+			dev_err(&pdev->dev, "OF probe error\n");
+			return ret;
+		}
+	}
+
+	if (!pdata)
+		return -EINVAL;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regs = pdata->regs;
+
+	dev = b53_switch_alloc(&pdev->dev, &b53_mmap_ops, priv);
+	if (!dev)
+		return -ENOMEM;
+
+	dev->pdata = pdata;
+
+	platform_set_drvdata(pdev, dev);
+
+	return b53_switch_register(dev);
+}
+
+static int b53_mmap_remove(struct platform_device *pdev)
+{
+	struct b53_device *dev = platform_get_drvdata(pdev);
+
+	if (dev)
+		b53_switch_remove(dev);
+
+	return 0;
+}
+
+static void b53_mmap_shutdown(struct platform_device *pdev)
+{
+	struct b53_device *dev = platform_get_drvdata(pdev);
+
+	if (dev)
+		b53_switch_shutdown(dev);
+
+	platform_set_drvdata(pdev, NULL);
+}
+
+static const struct of_device_id b53_mmap_of_table[] = {
+	{ .compatible = "brcm,bcm3384-switch" },
+	{ .compatible = "brcm,bcm6328-switch" },
+	{ .compatible = "brcm,bcm6368-switch" },
+	{ .compatible = "brcm,bcm63xx-switch" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, b53_mmap_of_table);
+
+static struct platform_driver b53_mmap_driver = {
+	.probe = b53_mmap_probe,
+	.remove = b53_mmap_remove,
+	.shutdown = b53_mmap_shutdown,
+	.driver = {
+		.name = "b53-switch",
+		.of_match_table = b53_mmap_of_table,
+	},
+};
+
+module_platform_driver(b53_mmap_driver);
+MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
+MODULE_DESCRIPTION("B53 MMAP access driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
new file mode 100644
index 000000000..795cbffd5
--- /dev/null
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -0,0 +1,392 @@
+/*
+ * B53 common definitions
+ *
+ * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __B53_PRIV_H
+#define __B53_PRIV_H
+
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/phylink.h>
+#include <linux/etherdevice.h>
+#include <net/dsa.h>
+
+#include "b53_regs.h"
+
+struct b53_device;
+struct net_device;
+
+struct b53_io_ops {
+	int (*read8)(struct b53_device *dev, u8 page, u8 reg, u8 *value);
+	int (*read16)(struct b53_device *dev, u8 page, u8 reg, u16 *value);
+	int (*read32)(struct b53_device *dev, u8 page, u8 reg, u32 *value);
+	int (*read48)(struct b53_device *dev, u8 page, u8 reg, u64 *value);
+	int (*read64)(struct b53_device *dev, u8 page, u8 reg, u64 *value);
+	int (*write8)(struct b53_device *dev, u8 page, u8 reg, u8 value);
+	int (*write16)(struct b53_device *dev, u8 page, u8 reg, u16 value);
+	int (*write32)(struct b53_device *dev, u8 page, u8 reg, u32 value);
+	int (*write48)(struct b53_device *dev, u8 page, u8 reg, u64 value);
+	int (*write64)(struct b53_device *dev, u8 page, u8 reg, u64 value);
+	int (*phy_read16)(struct b53_device *dev, int addr, int reg, u16 *value);
+	int (*phy_write16)(struct b53_device *dev, int addr, int reg, u16 value);
+	int (*irq_enable)(struct b53_device *dev, int port);
+	void (*irq_disable)(struct b53_device *dev, int port);
+	void (*phylink_get_caps)(struct b53_device *dev, int port,
+				 struct phylink_config *config);
+	struct phylink_pcs *(*phylink_mac_select_pcs)(struct b53_device *dev,
+						      int port,
+						      phy_interface_t interface);
+	u8 (*serdes_map_lane)(struct b53_device *dev, int port);
+	void (*serdes_link_set)(struct b53_device *dev, int port,
+				unsigned int mode, phy_interface_t interface,
+				bool link_up);
+};
+
+#define B53_INVALID_LANE	0xff
+
+enum {
+	BCM4908_DEVICE_ID = 0x4908,
+	BCM5325_DEVICE_ID = 0x25,
+	BCM5365_DEVICE_ID = 0x65,
+	BCM5389_DEVICE_ID = 0x89,
+	BCM5395_DEVICE_ID = 0x95,
+	BCM5397_DEVICE_ID = 0x97,
+	BCM5398_DEVICE_ID = 0x98,
+	BCM53115_DEVICE_ID = 0x53115,
+	BCM53125_DEVICE_ID = 0x53125,
+	BCM53128_DEVICE_ID = 0x53128,
+	BCM63XX_DEVICE_ID = 0x6300,
+	BCM53010_DEVICE_ID = 0x53010,
+	BCM53011_DEVICE_ID = 0x53011,
+	BCM53012_DEVICE_ID = 0x53012,
+	BCM53018_DEVICE_ID = 0x53018,
+	BCM53019_DEVICE_ID = 0x53019,
+	BCM58XX_DEVICE_ID = 0x5800,
+	BCM583XX_DEVICE_ID = 0x58300,
+	BCM7445_DEVICE_ID = 0x7445,
+	BCM7278_DEVICE_ID = 0x7278,
+};
+
+struct b53_pcs {
+	struct phylink_pcs pcs;
+	struct b53_device *dev;
+	u8 lane;
+};
+
+#define B53_N_PORTS	9
+#define B53_N_PORTS_25	6
+#define B53_N_PCS	2
+
+struct b53_port {
+	u16		vlan_ctl_mask;
+	struct ethtool_eee eee;
+};
+
+struct b53_vlan {
+	u16 members;
+	u16 untag;
+	bool valid;
+};
+
+struct b53_device {
+	struct dsa_switch *ds;
+	struct b53_platform_data *pdata;
+	const char *name;
+
+	struct mutex reg_mutex;
+	struct mutex stats_mutex;
+	struct mutex arl_mutex;
+	const struct b53_io_ops *ops;
+
+	/* chip specific data */
+	u32 chip_id;
+	u8 core_rev;
+	u8 vta_regs[3];
+	u8 duplex_reg;
+	u8 jumbo_pm_reg;
+	u8 jumbo_size_reg;
+	int reset_gpio;
+	u8 num_arl_bins;
+	u16 num_arl_buckets;
+	enum dsa_tag_protocol tag_protocol;
+
+	/* used ports mask */
+	u16 enabled_ports;
+	unsigned int imp_port;
+
+	/* connect specific data */
+	u8 current_page;
+	struct device *dev;
+	u8 serdes_lane;
+
+	/* Master MDIO bus we got probed from */
+	struct mii_bus *bus;
+
+	void *priv;
+
+	/* run time configuration */
+	bool enable_jumbo;
+
+	unsigned int num_vlans;
+	struct b53_vlan *vlans;
+	bool vlan_enabled;
+	unsigned int num_ports;
+	struct b53_port *ports;
+
+	struct b53_pcs pcs[B53_N_PCS];
+};
+
+#define b53_for_each_port(dev, i) \
+	for (i = 0; i < B53_N_PORTS; i++) \
+		if (dev->enabled_ports & BIT(i))
+
+
+static inline int is5325(struct b53_device *dev)
+{
+	return dev->chip_id == BCM5325_DEVICE_ID;
+}
+
+static inline int is5365(struct b53_device *dev)
+{
+#ifdef CONFIG_BCM47XX
+	return dev->chip_id == BCM5365_DEVICE_ID;
+#else
+	return 0;
+#endif
+}
+
+static inline int is5397_98(struct b53_device *dev)
+{
+	return dev->chip_id == BCM5397_DEVICE_ID ||
+		dev->chip_id == BCM5398_DEVICE_ID;
+}
+
+static inline int is539x(struct b53_device *dev)
+{
+	return dev->chip_id == BCM5395_DEVICE_ID ||
+		dev->chip_id == BCM5397_DEVICE_ID ||
+		dev->chip_id == BCM5398_DEVICE_ID;
+}
+
+static inline int is531x5(struct b53_device *dev)
+{
+	return dev->chip_id == BCM53115_DEVICE_ID ||
+		dev->chip_id == BCM53125_DEVICE_ID ||
+		dev->chip_id == BCM53128_DEVICE_ID;
+}
+
+static inline int is63xx(struct b53_device *dev)
+{
+	return dev->chip_id == BCM63XX_DEVICE_ID;
+}
+
+static inline int is5301x(struct b53_device *dev)
+{
+	return dev->chip_id == BCM53010_DEVICE_ID ||
+		dev->chip_id == BCM53011_DEVICE_ID ||
+		dev->chip_id == BCM53012_DEVICE_ID ||
+		dev->chip_id == BCM53018_DEVICE_ID ||
+		dev->chip_id == BCM53019_DEVICE_ID;
+}
+
+static inline int is58xx(struct b53_device *dev)
+{
+	return dev->chip_id == BCM58XX_DEVICE_ID ||
+		dev->chip_id == BCM583XX_DEVICE_ID ||
+		dev->chip_id == BCM7445_DEVICE_ID ||
+		dev->chip_id == BCM7278_DEVICE_ID;
+}
+
+#define B53_CPU_PORT_25	5
+#define B53_CPU_PORT	8
+
+static inline unsigned int b53_max_arl_entries(struct b53_device *dev)
+{
+	return dev->num_arl_buckets * dev->num_arl_bins;
+}
+
+struct b53_device *b53_switch_alloc(struct device *base,
+				    const struct b53_io_ops *ops,
+				    void *priv);
+
+int b53_switch_detect(struct b53_device *dev);
+
+int b53_switch_register(struct b53_device *dev);
+
+static inline void b53_switch_remove(struct b53_device *dev)
+{
+	dsa_unregister_switch(dev->ds);
+}
+
+static inline void b53_switch_shutdown(struct b53_device *dev)
+{
+	dsa_switch_shutdown(dev->ds);
+}
+
+#define b53_build_op(type_op_size, val_type)				\
+static inline int b53_##type_op_size(struct b53_device *dev, u8 page,	\
+				     u8 reg, val_type val)		\
+{									\
+	int ret;							\
+									\
+	mutex_lock(&dev->reg_mutex);					\
+	ret = dev->ops->type_op_size(dev, page, reg, val);		\
+	mutex_unlock(&dev->reg_mutex);					\
+									\
+	return ret;							\
+}
+
+b53_build_op(read8, u8 *);
+b53_build_op(read16, u16 *);
+b53_build_op(read32, u32 *);
+b53_build_op(read48, u64 *);
+b53_build_op(read64, u64 *);
+
+b53_build_op(write8, u8);
+b53_build_op(write16, u16);
+b53_build_op(write32, u32);
+b53_build_op(write48, u64);
+b53_build_op(write64, u64);
+
+struct b53_arl_entry {
+	u16 port;
+	u8 mac[ETH_ALEN];
+	u16 vid;
+	u8 is_valid:1;
+	u8 is_age:1;
+	u8 is_static:1;
+};
+
+static inline void b53_arl_to_entry(struct b53_arl_entry *ent,
+				    u64 mac_vid, u32 fwd_entry)
+{
+	memset(ent, 0, sizeof(*ent));
+	ent->port = fwd_entry & ARLTBL_DATA_PORT_ID_MASK;
+	ent->is_valid = !!(fwd_entry & ARLTBL_VALID);
+	ent->is_age = !!(fwd_entry & ARLTBL_AGE);
+	ent->is_static = !!(fwd_entry & ARLTBL_STATIC);
+	u64_to_ether_addr(mac_vid, ent->mac);
+	ent->vid = mac_vid >> ARLTBL_VID_S;
+}
+
+static inline void b53_arl_from_entry(u64 *mac_vid, u32 *fwd_entry,
+				      const struct b53_arl_entry *ent)
+{
+	*mac_vid = ether_addr_to_u64(ent->mac);
+	*mac_vid |= (u64)(ent->vid & ARLTBL_VID_MASK) << ARLTBL_VID_S;
+	*fwd_entry = ent->port & ARLTBL_DATA_PORT_ID_MASK;
+	if (ent->is_valid)
+		*fwd_entry |= ARLTBL_VALID;
+	if (ent->is_static)
+		*fwd_entry |= ARLTBL_STATIC;
+	if (ent->is_age)
+		*fwd_entry |= ARLTBL_AGE;
+}
+
+#ifdef CONFIG_BCM47XX
+
+#include <linux/bcm47xx_nvram.h>
+#include <bcm47xx_board.h>
+static inline int b53_switch_get_reset_gpio(struct b53_device *dev)
+{
+	enum bcm47xx_board board = bcm47xx_board_get();
+
+	switch (board) {
+	case BCM47XX_BOARD_LINKSYS_WRT300NV11:
+	case BCM47XX_BOARD_LINKSYS_WRT310NV1:
+		return 8;
+	default:
+		return bcm47xx_nvram_gpio_pin("robo_reset");
+	}
+}
+#else
+static inline int b53_switch_get_reset_gpio(struct b53_device *dev)
+{
+	return -ENOENT;
+}
+#endif
+
+/* Exported functions towards other drivers */
+void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port);
+int b53_configure_vlan(struct dsa_switch *ds);
+void b53_get_strings(struct dsa_switch *ds, int port, u32 stringset,
+		     uint8_t *data);
+void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data);
+int b53_get_sset_count(struct dsa_switch *ds, int port, int sset);
+void b53_get_ethtool_phy_stats(struct dsa_switch *ds, int port, uint64_t *data);
+int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge,
+		bool *tx_fwd_offload, struct netlink_ext_ack *extack);
+void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge);
+void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state);
+void b53_br_fast_age(struct dsa_switch *ds, int port);
+int b53_br_flags_pre(struct dsa_switch *ds, int port,
+		     struct switchdev_brport_flags flags,
+		     struct netlink_ext_ack *extack);
+int b53_br_flags(struct dsa_switch *ds, int port,
+		 struct switchdev_brport_flags flags,
+		 struct netlink_ext_ack *extack);
+int b53_setup_devlink_resources(struct dsa_switch *ds);
+void b53_port_event(struct dsa_switch *ds, int port);
+void b53_phylink_mac_config(struct dsa_switch *ds, int port,
+			    unsigned int mode,
+			    const struct phylink_link_state *state);
+void b53_phylink_mac_link_down(struct dsa_switch *ds, int port,
+			       unsigned int mode,
+			       phy_interface_t interface);
+void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
+			     unsigned int mode,
+			     phy_interface_t interface,
+			     struct phy_device *phydev,
+			     int speed, int duplex,
+			     bool tx_pause, bool rx_pause);
+int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
+		       struct netlink_ext_ack *extack);
+int b53_vlan_add(struct dsa_switch *ds, int port,
+		 const struct switchdev_obj_port_vlan *vlan,
+		 struct netlink_ext_ack *extack);
+int b53_vlan_del(struct dsa_switch *ds, int port,
+		 const struct switchdev_obj_port_vlan *vlan);
+int b53_fdb_add(struct dsa_switch *ds, int port,
+		const unsigned char *addr, u16 vid,
+		struct dsa_db db);
+int b53_fdb_del(struct dsa_switch *ds, int port,
+		const unsigned char *addr, u16 vid,
+		struct dsa_db db);
+int b53_fdb_dump(struct dsa_switch *ds, int port,
+		 dsa_fdb_dump_cb_t *cb, void *data);
+int b53_mdb_add(struct dsa_switch *ds, int port,
+		const struct switchdev_obj_port_mdb *mdb,
+		struct dsa_db db);
+int b53_mdb_del(struct dsa_switch *ds, int port,
+		const struct switchdev_obj_port_mdb *mdb,
+		struct dsa_db db);
+int b53_mirror_add(struct dsa_switch *ds, int port,
+		   struct dsa_mall_mirror_tc_entry *mirror, bool ingress,
+		   struct netlink_ext_ack *extack);
+enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port,
+					   enum dsa_tag_protocol mprot);
+void b53_mirror_del(struct dsa_switch *ds, int port,
+		    struct dsa_mall_mirror_tc_entry *mirror);
+int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy);
+void b53_disable_port(struct dsa_switch *ds, int port);
+void b53_brcm_hdr_setup(struct dsa_switch *ds, int port);
+void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable);
+int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy);
+int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e);
+int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e);
+
+#endif
diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
new file mode 100644
index 000000000..b2c539a42
--- /dev/null
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -0,0 +1,527 @@
+/*
+ * B53 register definitions
+ *
+ * Copyright (C) 2004 Broadcom Corporation
+ * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __B53_REGS_H
+#define __B53_REGS_H
+
+/* Management Port (SMP) Page offsets */
+#define B53_CTRL_PAGE			0x00 /* Control */
+#define B53_STAT_PAGE			0x01 /* Status */
+#define B53_MGMT_PAGE			0x02 /* Management Mode */
+#define B53_MIB_AC_PAGE			0x03 /* MIB Autocast */
+#define B53_ARLCTRL_PAGE		0x04 /* ARL Control */
+#define B53_ARLIO_PAGE			0x05 /* ARL Access */
+#define B53_FRAMEBUF_PAGE		0x06 /* Management frame access */
+#define B53_MEM_ACCESS_PAGE		0x08 /* Memory access */
+
+/* PHY Registers */
+#define B53_PORT_MII_PAGE(i)		(0x10 + (i)) /* Port i MII Registers */
+#define B53_IM_PORT_PAGE		0x18 /* Inverse MII Port (to EMAC) */
+#define B53_ALL_PORT_PAGE		0x19 /* All ports MII (broadcast) */
+
+/* MIB registers */
+#define B53_MIB_PAGE(i)			(0x20 + (i))
+
+/* Quality of Service (QoS) Registers */
+#define B53_QOS_PAGE			0x30
+
+/* Port VLAN Page */
+#define B53_PVLAN_PAGE			0x31
+
+/* VLAN Registers */
+#define B53_VLAN_PAGE			0x34
+
+/* Jumbo Frame Registers */
+#define B53_JUMBO_PAGE			0x40
+
+/* EEE Control Registers Page */
+#define B53_EEE_PAGE			0x92
+
+/* CFP Configuration Registers Page */
+#define B53_CFP_PAGE			0xa1
+
+/*************************************************************************
+ * Control Page registers
+ *************************************************************************/
+
+/* Port Control Register (8 bit) */
+#define B53_PORT_CTRL(i)		(0x00 + (i))
+#define   PORT_CTRL_RX_DISABLE		BIT(0)
+#define   PORT_CTRL_TX_DISABLE		BIT(1)
+#define   PORT_CTRL_RX_BCST_EN		BIT(2) /* Broadcast RX (P8 only) */
+#define   PORT_CTRL_RX_MCST_EN		BIT(3) /* Multicast RX (P8 only) */
+#define   PORT_CTRL_RX_UCST_EN		BIT(4) /* Unicast RX (P8 only) */
+#define	  PORT_CTRL_STP_STATE_S		5
+#define   PORT_CTRL_NO_STP		(0 << PORT_CTRL_STP_STATE_S)
+#define   PORT_CTRL_DIS_STATE		(1 << PORT_CTRL_STP_STATE_S)
+#define   PORT_CTRL_BLOCK_STATE		(2 << PORT_CTRL_STP_STATE_S)
+#define   PORT_CTRL_LISTEN_STATE	(3 << PORT_CTRL_STP_STATE_S)
+#define   PORT_CTRL_LEARN_STATE		(4 << PORT_CTRL_STP_STATE_S)
+#define   PORT_CTRL_FWD_STATE		(5 << PORT_CTRL_STP_STATE_S)
+#define   PORT_CTRL_STP_STATE_MASK	(0x7 << PORT_CTRL_STP_STATE_S)
+
+/* SMP Control Register (8 bit) */
+#define B53_SMP_CTRL			0x0a
+
+/* Switch Mode Control Register (8 bit) */
+#define B53_SWITCH_MODE			0x0b
+#define   SM_SW_FWD_MODE		BIT(0)	/* 1 = Managed Mode */
+#define   SM_SW_FWD_EN			BIT(1)	/* Forwarding Enable */
+
+/* IMP Port state override register (8 bit) */
+#define B53_PORT_OVERRIDE_CTRL		0x0e
+#define   PORT_OVERRIDE_LINK		BIT(0)
+#define   PORT_OVERRIDE_FULL_DUPLEX	BIT(1) /* 0 = Half Duplex */
+#define   PORT_OVERRIDE_SPEED_S		2
+#define   PORT_OVERRIDE_SPEED_10M	(0 << PORT_OVERRIDE_SPEED_S)
+#define   PORT_OVERRIDE_SPEED_100M	(1 << PORT_OVERRIDE_SPEED_S)
+#define   PORT_OVERRIDE_SPEED_1000M	(2 << PORT_OVERRIDE_SPEED_S)
+#define   PORT_OVERRIDE_RV_MII_25	BIT(4) /* BCM5325 only */
+#define   PORT_OVERRIDE_RX_FLOW		BIT(4)
+#define   PORT_OVERRIDE_TX_FLOW		BIT(5)
+#define   PORT_OVERRIDE_SPEED_2000M	BIT(6) /* BCM5301X only, requires setting 1000M */
+#define   PORT_OVERRIDE_EN		BIT(7) /* Use the register contents */
+
+/* Power-down mode control */
+#define B53_PD_MODE_CTRL_25		0x0f
+
+/* IP Multicast control (8 bit) */
+#define B53_IP_MULTICAST_CTRL		0x21
+#define  B53_IPMC_FWD_EN		BIT(1)
+#define  B53_UC_FWD_EN			BIT(6)
+#define  B53_MC_FWD_EN			BIT(7)
+
+/* Switch control (8 bit) */
+#define B53_SWITCH_CTRL			0x22
+#define  B53_MII_DUMB_FWDG_EN		BIT(6)
+
+/* (16 bit) */
+#define B53_UC_FLOOD_MASK		0x32
+#define B53_MC_FLOOD_MASK		0x34
+#define B53_IPMC_FLOOD_MASK		0x36
+#define B53_DIS_LEARNING		0x3c
+
+/*
+ * Override Ports 0-7 State on devices with xMII interfaces (8 bit)
+ *
+ * For port 8 still use B53_PORT_OVERRIDE_CTRL
+ * Please note that not all ports are available on every hardware, e.g. BCM5301X
+ * don't include overriding port 6, BCM63xx also have some limitations.
+ */
+#define B53_GMII_PORT_OVERRIDE_CTRL(i)	(0x58 + (i))
+#define   GMII_PO_LINK			BIT(0)
+#define   GMII_PO_FULL_DUPLEX		BIT(1) /* 0 = Half Duplex */
+#define   GMII_PO_SPEED_S		2
+#define   GMII_PO_SPEED_10M		(0 << GMII_PO_SPEED_S)
+#define   GMII_PO_SPEED_100M		(1 << GMII_PO_SPEED_S)
+#define   GMII_PO_SPEED_1000M		(2 << GMII_PO_SPEED_S)
+#define   GMII_PO_RX_FLOW		BIT(4)
+#define   GMII_PO_TX_FLOW		BIT(5)
+#define   GMII_PO_EN			BIT(6) /* Use the register contents */
+#define   GMII_PO_SPEED_2000M		BIT(7) /* BCM5301X only, requires setting 1000M */
+
+#define B53_RGMII_CTRL_IMP		0x60
+#define   RGMII_CTRL_ENABLE_GMII	BIT(7)
+#define   RGMII_CTRL_TIMING_SEL		BIT(2)
+#define   RGMII_CTRL_DLL_RXC		BIT(1)
+#define   RGMII_CTRL_DLL_TXC		BIT(0)
+
+#define B53_RGMII_CTRL_P(i)		(B53_RGMII_CTRL_IMP + (i))
+
+/* Software reset register (8 bit) */
+#define B53_SOFTRESET			0x79
+#define   SW_RST			BIT(7)
+#define   EN_CH_RST			BIT(6)
+#define   EN_SW_RST			BIT(4)
+
+/* Fast Aging Control register (8 bit) */
+#define B53_FAST_AGE_CTRL		0x88
+#define   FAST_AGE_STATIC		BIT(0)
+#define   FAST_AGE_DYNAMIC		BIT(1)
+#define   FAST_AGE_PORT			BIT(2)
+#define   FAST_AGE_VLAN			BIT(3)
+#define   FAST_AGE_STP			BIT(4)
+#define   FAST_AGE_MC			BIT(5)
+#define   FAST_AGE_DONE			BIT(7)
+
+/* Fast Aging Port Control register (8 bit) */
+#define B53_FAST_AGE_PORT_CTRL		0x89
+
+/* Fast Aging VID Control register (16 bit) */
+#define B53_FAST_AGE_VID_CTRL		0x8a
+
+/*************************************************************************
+ * Status Page registers
+ *************************************************************************/
+
+/* Link Status Summary Register (16bit) */
+#define B53_LINK_STAT			0x00
+
+/* Link Status Change Register (16 bit) */
+#define B53_LINK_STAT_CHANGE		0x02
+
+/* Port Speed Summary Register (16 bit for FE, 32 bit for GE) */
+#define B53_SPEED_STAT			0x04
+#define  SPEED_PORT_FE(reg, port)	(((reg) >> (port)) & 1)
+#define  SPEED_PORT_GE(reg, port)	(((reg) >> 2 * (port)) & 3)
+#define  SPEED_STAT_10M			0
+#define  SPEED_STAT_100M		1
+#define  SPEED_STAT_1000M		2
+
+/* Duplex Status Summary (16 bit) */
+#define B53_DUPLEX_STAT_FE		0x06
+#define B53_DUPLEX_STAT_GE		0x08
+#define B53_DUPLEX_STAT_63XX		0x0c
+
+/* Revision ID register for BCM5325 */
+#define B53_REV_ID_25			0x50
+
+/* Strap Value (48 bit) */
+#define B53_STRAP_VALUE			0x70
+#define   SV_GMII_CTRL_115		BIT(27)
+
+/*************************************************************************
+ * Management Mode Page Registers
+ *************************************************************************/
+
+/* Global Management Config Register (8 bit) */
+#define B53_GLOBAL_CONFIG		0x00
+#define   GC_RESET_MIB			0x01
+#define   GC_RX_BPDU_EN			0x02
+#define   GC_MIB_AC_HDR_EN		0x10
+#define   GC_MIB_AC_EN			0x20
+#define   GC_FRM_MGMT_PORT_M		0xC0
+#define   GC_FRM_MGMT_PORT_04		0x00
+#define   GC_FRM_MGMT_PORT_MII		0x80
+
+/* Broadcom Header control register (8 bit) */
+#define B53_BRCM_HDR			0x03
+#define   BRCM_HDR_P8_EN		BIT(0) /* Enable tagging on port 8 */
+#define   BRCM_HDR_P5_EN		BIT(1) /* Enable tagging on port 5 */
+#define   BRCM_HDR_P7_EN		BIT(2) /* Enable tagging on port 7 */
+
+/* Mirror capture control register (16 bit) */
+#define B53_MIR_CAP_CTL			0x10
+#define  CAP_PORT_MASK			0xf
+#define  BLK_NOT_MIR			BIT(14)
+#define  MIRROR_EN			BIT(15)
+
+/* Ingress mirror control register (16 bit) */
+#define B53_IG_MIR_CTL			0x12
+#define  MIRROR_MASK			0x1ff
+#define  DIV_EN				BIT(13)
+#define  MIRROR_FILTER_MASK		0x3
+#define  MIRROR_FILTER_SHIFT		14
+#define  MIRROR_ALL			0
+#define  MIRROR_DA			1
+#define  MIRROR_SA			2
+
+/* Ingress mirror divider register (16 bit) */
+#define B53_IG_MIR_DIV			0x14
+#define  IN_MIRROR_DIV_MASK		0x3ff
+
+/* Ingress mirror MAC address register (48 bit) */
+#define B53_IG_MIR_MAC			0x16
+
+/* Egress mirror control register (16 bit) */
+#define B53_EG_MIR_CTL			0x1C
+
+/* Egress mirror divider register (16 bit) */
+#define B53_EG_MIR_DIV			0x1E
+
+/* Egress mirror MAC address register (48 bit) */
+#define B53_EG_MIR_MAC			0x20
+
+/* Device ID register (8 or 32 bit) */
+#define B53_DEVICE_ID			0x30
+
+/* Revision ID register (8 bit) */
+#define B53_REV_ID			0x40
+
+/* Broadcom header RX control (16 bit) */
+#define B53_BRCM_HDR_RX_DIS		0x60
+
+/* Broadcom header TX control (16 bit)	*/
+#define B53_BRCM_HDR_TX_DIS		0x62
+
+/*************************************************************************
+ * ARL Access Page Registers
+ *************************************************************************/
+
+/* VLAN Table Access Register (8 bit) */
+#define B53_VT_ACCESS			0x80
+#define B53_VT_ACCESS_9798		0x60 /* for BCM5397/BCM5398 */
+#define B53_VT_ACCESS_63XX		0x60 /* for BCM6328/62/68 */
+#define   VTA_CMD_WRITE			0
+#define   VTA_CMD_READ			1
+#define   VTA_CMD_CLEAR			2
+#define   VTA_START_CMD			BIT(7)
+
+/* VLAN Table Index Register (16 bit) */
+#define B53_VT_INDEX			0x81
+#define B53_VT_INDEX_9798		0x61
+#define B53_VT_INDEX_63XX		0x62
+
+/* VLAN Table Entry Register (32 bit) */
+#define B53_VT_ENTRY			0x83
+#define B53_VT_ENTRY_9798		0x63
+#define B53_VT_ENTRY_63XX		0x64
+#define   VTE_MEMBERS			0x1ff
+#define   VTE_UNTAG_S			9
+#define   VTE_UNTAG			(0x1ff << 9)
+
+/*************************************************************************
+ * ARL I/O Registers
+ *************************************************************************/
+
+/* ARL Table Read/Write Register (8 bit) */
+#define B53_ARLTBL_RW_CTRL		0x00
+#define    ARLTBL_RW			BIT(0)
+#define    ARLTBL_IVL_SVL_SELECT	BIT(6)
+#define    ARLTBL_START_DONE		BIT(7)
+
+/* MAC Address Index Register (48 bit) */
+#define B53_MAC_ADDR_IDX		0x02
+
+/* VLAN ID Index Register (16 bit) */
+#define B53_VLAN_ID_IDX			0x08
+
+/* ARL Table MAC/VID Entry N Registers (64 bit)
+ *
+ * BCM5325 and BCM5365 share most definitions below
+ */
+#define B53_ARLTBL_MAC_VID_ENTRY(n)	((0x10 * (n)) + 0x10)
+#define   ARLTBL_MAC_MASK		0xffffffffffffULL
+#define   ARLTBL_VID_S			48
+#define   ARLTBL_VID_MASK_25		0xff
+#define   ARLTBL_VID_MASK		0xfff
+#define   ARLTBL_DATA_PORT_ID_S_25	48
+#define   ARLTBL_DATA_PORT_ID_MASK_25	0xf
+#define   ARLTBL_AGE_25			BIT(61)
+#define   ARLTBL_STATIC_25		BIT(62)
+#define   ARLTBL_VALID_25		BIT(63)
+
+/* ARL Table Data Entry N Registers (32 bit) */
+#define B53_ARLTBL_DATA_ENTRY(n)	((0x10 * (n)) + 0x18)
+#define   ARLTBL_DATA_PORT_ID_MASK	0x1ff
+#define   ARLTBL_TC(tc)			((3 & tc) << 11)
+#define   ARLTBL_AGE			BIT(14)
+#define   ARLTBL_STATIC			BIT(15)
+#define   ARLTBL_VALID			BIT(16)
+
+/* Maximum number of bin entries in the ARL for all switches */
+#define B53_ARLTBL_MAX_BIN_ENTRIES	4
+
+/* ARL Search Control Register (8 bit) */
+#define B53_ARL_SRCH_CTL		0x50
+#define B53_ARL_SRCH_CTL_25		0x20
+#define   ARL_SRCH_VLID			BIT(0)
+#define   ARL_SRCH_STDN			BIT(7)
+
+/* ARL Search Address Register (16 bit) */
+#define B53_ARL_SRCH_ADDR		0x51
+#define B53_ARL_SRCH_ADDR_25		0x22
+#define B53_ARL_SRCH_ADDR_65		0x24
+#define  ARL_ADDR_MASK			GENMASK(14, 0)
+
+/* ARL Search MAC/VID Result (64 bit) */
+#define B53_ARL_SRCH_RSTL_0_MACVID	0x60
+
+/* Single register search result on 5325 */
+#define B53_ARL_SRCH_RSTL_0_MACVID_25	0x24
+/* Single register search result on 5365 */
+#define B53_ARL_SRCH_RSTL_0_MACVID_65	0x30
+
+/* ARL Search Data Result (32 bit) */
+#define B53_ARL_SRCH_RSTL_0		0x68
+
+#define B53_ARL_SRCH_RSTL_MACVID(x)	(B53_ARL_SRCH_RSTL_0_MACVID + ((x) * 0x10))
+#define B53_ARL_SRCH_RSTL(x)		(B53_ARL_SRCH_RSTL_0 + ((x) * 0x10))
+
+/*************************************************************************
+ * Port VLAN Registers
+ *************************************************************************/
+
+/* Port VLAN mask (16 bit) IMP port is always 8, also on 5325 & co */
+#define B53_PVLAN_PORT_MASK(i)		((i) * 2)
+
+/* Join all VLANs register (16 bit) */
+#define B53_JOIN_ALL_VLAN_EN		0x50
+
+/*************************************************************************
+ * 802.1Q Page Registers
+ *************************************************************************/
+
+/* Global QoS Control (8 bit) */
+#define B53_QOS_GLOBAL_CTL		0x00
+
+/* Enable 802.1Q for individual Ports (16 bit) */
+#define B53_802_1P_EN			0x04
+
+/*************************************************************************
+ * VLAN Page Registers
+ *************************************************************************/
+
+/* VLAN Control 0 (8 bit) */
+#define B53_VLAN_CTRL0			0x00
+#define   VC0_8021PF_CTRL_MASK		0x3
+#define   VC0_8021PF_CTRL_NONE		0x0
+#define   VC0_8021PF_CTRL_CHANGE_PRI	0x1
+#define   VC0_8021PF_CTRL_CHANGE_VID	0x2
+#define   VC0_8021PF_CTRL_CHANGE_BOTH	0x3
+#define   VC0_8021QF_CTRL_MASK		0xc
+#define   VC0_8021QF_CTRL_CHANGE_PRI	0x1
+#define   VC0_8021QF_CTRL_CHANGE_VID	0x2
+#define   VC0_8021QF_CTRL_CHANGE_BOTH	0x3
+#define   VC0_RESERVED_1		BIT(1)
+#define   VC0_DROP_VID_MISS		BIT(4)
+#define   VC0_VID_HASH_VID		BIT(5)
+#define   VC0_VID_CHK_EN		BIT(6)	/* Use VID,DA or VID,SA */
+#define   VC0_VLAN_EN			BIT(7)	/* 802.1Q VLAN Enabled */
+
+/* VLAN Control 1 (8 bit) */
+#define B53_VLAN_CTRL1			0x01
+#define   VC1_RX_MCST_TAG_EN		BIT(1)
+#define   VC1_RX_MCST_FWD_EN		BIT(2)
+#define   VC1_RX_MCST_UNTAG_EN		BIT(3)
+
+/* VLAN Control 2 (8 bit) */
+#define B53_VLAN_CTRL2			0x02
+
+/* VLAN Control 3 (8 bit when BCM5325, 16 bit else) */
+#define B53_VLAN_CTRL3			0x03
+#define B53_VLAN_CTRL3_63XX		0x04
+#define   VC3_MAXSIZE_1532		BIT(6) /* 5325 only */
+#define   VC3_HIGH_8BIT_EN		BIT(7) /* 5325 only */
+
+/* VLAN Control 4 (8 bit) */
+#define B53_VLAN_CTRL4			0x05
+#define B53_VLAN_CTRL4_25		0x04
+#define B53_VLAN_CTRL4_63XX		0x06
+#define   VC4_ING_VID_CHECK_S		6
+#define   VC4_ING_VID_CHECK_MASK	(0x3 << VC4_ING_VID_CHECK_S)
+#define   VC4_ING_VID_VIO_FWD		0 /* forward, but do not learn */
+#define   VC4_ING_VID_VIO_DROP		1 /* drop VID violations */
+#define   VC4_NO_ING_VID_CHK		2 /* do not check */
+#define   VC4_ING_VID_VIO_TO_IMP	3 /* redirect to MII port */
+
+/* VLAN Control 5 (8 bit) */
+#define B53_VLAN_CTRL5			0x06
+#define B53_VLAN_CTRL5_25		0x05
+#define B53_VLAN_CTRL5_63XX		0x07
+#define   VC5_VID_FFF_EN		BIT(2)
+#define   VC5_DROP_VTABLE_MISS		BIT(3)
+
+/* VLAN Control 6 (8 bit) */
+#define B53_VLAN_CTRL6			0x07
+#define B53_VLAN_CTRL6_63XX		0x08
+
+/* VLAN Table Access Register (16 bit) */
+#define B53_VLAN_TABLE_ACCESS_25	0x06	/* BCM5325E/5350 */
+#define B53_VLAN_TABLE_ACCESS_65	0x08	/* BCM5365 */
+#define   VTA_VID_LOW_MASK_25		0xf
+#define   VTA_VID_LOW_MASK_65		0xff
+#define   VTA_VID_HIGH_S_25		4
+#define   VTA_VID_HIGH_S_65		8
+#define   VTA_VID_HIGH_MASK_25		(0xff << VTA_VID_HIGH_S_25E)
+#define   VTA_VID_HIGH_MASK_65		(0xf << VTA_VID_HIGH_S_65)
+#define   VTA_RW_STATE			BIT(12)
+#define   VTA_RW_STATE_RD		0
+#define   VTA_RW_STATE_WR		BIT(12)
+#define   VTA_RW_OP_EN			BIT(13)
+
+/* VLAN Read/Write Registers for (16/32 bit) */
+#define B53_VLAN_WRITE_25		0x08
+#define B53_VLAN_WRITE_65		0x0a
+#define B53_VLAN_READ			0x0c
+#define   VA_MEMBER_MASK		0x3f
+#define   VA_UNTAG_S_25			6
+#define   VA_UNTAG_MASK_25		0x3f
+#define   VA_UNTAG_S_65			7
+#define   VA_UNTAG_MASK_65		0x1f
+#define   VA_VID_HIGH_S			12
+#define   VA_VID_HIGH_MASK		(0xffff << VA_VID_HIGH_S)
+#define   VA_VALID_25			BIT(20)
+#define   VA_VALID_25_R4		BIT(24)
+#define   VA_VALID_65			BIT(14)
+
+/* VLAN Port Default Tag (16 bit) */
+#define B53_VLAN_PORT_DEF_TAG(i)	(0x10 + 2 * (i))
+
+/*************************************************************************
+ * Jumbo Frame Page Registers
+ *************************************************************************/
+
+/* Jumbo Enable Port Mask (bit i == port i enabled) (32 bit) */
+#define B53_JUMBO_PORT_MASK		0x01
+#define B53_JUMBO_PORT_MASK_63XX	0x04
+#define   JPM_10_100_JUMBO_EN		BIT(24) /* GigE always enabled */
+
+/* Good Frame Max Size without 802.1Q TAG (16 bit) */
+#define B53_JUMBO_MAX_SIZE		0x05
+#define B53_JUMBO_MAX_SIZE_63XX		0x08
+#define   JMS_MIN_SIZE			1518
+#define   JMS_MAX_SIZE			9724
+
+/*************************************************************************
+ * EEE Configuration Page Registers
+ *************************************************************************/
+
+/* EEE Enable control register (16 bit) */
+#define B53_EEE_EN_CTRL			0x00
+
+/* EEE LPI assert status register (16 bit) */
+#define B53_EEE_LPI_ASSERT_STS		0x02
+
+/* EEE LPI indicate status register (16 bit) */
+#define B53_EEE_LPI_INDICATE		0x4
+
+/* EEE Receiving idle symbols status register (16 bit) */
+#define B53_EEE_RX_IDLE_SYM_STS		0x6
+
+/* EEE Pipeline timer register (32 bit) */
+#define B53_EEE_PIP_TIMER		0xC
+
+/* EEE Sleep timer Gig register (32 bit) */
+#define B53_EEE_SLEEP_TIMER_GIG(i)	(0x10 + 4 * (i))
+
+/* EEE Sleep timer FE register (32 bit) */
+#define B53_EEE_SLEEP_TIMER_FE(i)	(0x34 + 4 * (i))
+
+/* EEE Minimum LP timer Gig register (32 bit) */
+#define B53_EEE_MIN_LP_TIMER_GIG(i)	(0x58 + 4 * (i))
+
+/* EEE Minimum LP timer FE register (32 bit) */
+#define B53_EEE_MIN_LP_TIMER_FE(i)	(0x7c + 4 * (i))
+
+/* EEE Wake timer Gig register (16 bit) */
+#define B53_EEE_WAKE_TIMER_GIG(i)	(0xa0 + 2 * (i))
+
+/* EEE Wake timer FE register (16 bit) */
+#define B53_EEE_WAKE_TIMER_FE(i)	(0xb2 + 2 * (i))
+
+
+/*************************************************************************
+ * CFP Configuration Page Registers
+ *************************************************************************/
+
+/* CFP Control Register with ports map (8 bit) */
+#define B53_CFP_CTRL			0x00
+
+#endif /* !__B53_REGS_H */
diff --git a/drivers/net/dsa/b53/b53_serdes.c b/drivers/net/dsa/b53/b53_serdes.c
new file mode 100644
index 000000000..069021077
--- /dev/null
+++ b/drivers/net/dsa/b53/b53_serdes.c
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause
+/*
+ * Northstar Plus switch SerDes/SGMII PHY main logic
+ *
+ * Copyright (C) 2018 Florian Fainelli <f.fainelli@gmail.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/phy.h>
+#include <linux/phylink.h>
+#include <net/dsa.h>
+
+#include "b53_priv.h"
+#include "b53_serdes.h"
+#include "b53_regs.h"
+
+static inline struct b53_pcs *pcs_to_b53_pcs(struct phylink_pcs *pcs)
+{
+	return container_of(pcs, struct b53_pcs, pcs);
+}
+
+static void b53_serdes_write_blk(struct b53_device *dev, u8 offset, u16 block,
+				 u16 value)
+{
+	b53_write16(dev, B53_SERDES_PAGE, B53_SERDES_BLKADDR, block);
+	b53_write16(dev, B53_SERDES_PAGE, offset, value);
+}
+
+static u16 b53_serdes_read_blk(struct b53_device *dev, u8 offset, u16 block)
+{
+	u16 value;
+
+	b53_write16(dev, B53_SERDES_PAGE, B53_SERDES_BLKADDR, block);
+	b53_read16(dev, B53_SERDES_PAGE, offset, &value);
+
+	return value;
+}
+
+static void b53_serdes_set_lane(struct b53_device *dev, u8 lane)
+{
+	if (dev->serdes_lane == lane)
+		return;
+
+	WARN_ON(lane > 1);
+
+	b53_serdes_write_blk(dev, B53_SERDES_LANE,
+			     SERDES_XGXSBLK0_BLOCKADDRESS, lane);
+	dev->serdes_lane = lane;
+}
+
+static void b53_serdes_write(struct b53_device *dev, u8 lane,
+			     u8 offset, u16 block, u16 value)
+{
+	b53_serdes_set_lane(dev, lane);
+	b53_serdes_write_blk(dev, offset, block, value);
+}
+
+static u16 b53_serdes_read(struct b53_device *dev, u8 lane,
+			   u8 offset, u16 block)
+{
+	b53_serdes_set_lane(dev, lane);
+	return b53_serdes_read_blk(dev, offset, block);
+}
+
+static int b53_serdes_config(struct phylink_pcs *pcs, unsigned int mode,
+			     phy_interface_t interface,
+			     const unsigned long *advertising,
+			     bool permit_pause_to_mac)
+{
+	struct b53_device *dev = pcs_to_b53_pcs(pcs)->dev;
+	u8 lane = pcs_to_b53_pcs(pcs)->lane;
+	u16 reg;
+
+	reg = b53_serdes_read(dev, lane, B53_SERDES_DIGITAL_CONTROL(1),
+			      SERDES_DIGITAL_BLK);
+	if (interface == PHY_INTERFACE_MODE_1000BASEX)
+		reg |= FIBER_MODE_1000X;
+	else
+		reg &= ~FIBER_MODE_1000X;
+	b53_serdes_write(dev, lane, B53_SERDES_DIGITAL_CONTROL(1),
+			 SERDES_DIGITAL_BLK, reg);
+
+	return 0;
+}
+
+static void b53_serdes_an_restart(struct phylink_pcs *pcs)
+{
+	struct b53_device *dev = pcs_to_b53_pcs(pcs)->dev;
+	u8 lane = pcs_to_b53_pcs(pcs)->lane;
+	u16 reg;
+
+	reg = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMCR),
+			      SERDES_MII_BLK);
+	reg |= BMCR_ANRESTART;
+	b53_serdes_write(dev, lane, B53_SERDES_MII_REG(MII_BMCR),
+			 SERDES_MII_BLK, reg);
+}
+
+static void b53_serdes_get_state(struct phylink_pcs *pcs,
+				  struct phylink_link_state *state)
+{
+	struct b53_device *dev = pcs_to_b53_pcs(pcs)->dev;
+	u8 lane = pcs_to_b53_pcs(pcs)->lane;
+	u16 dig, bmsr;
+
+	dig = b53_serdes_read(dev, lane, B53_SERDES_DIGITAL_STATUS,
+			      SERDES_DIGITAL_BLK);
+	bmsr = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMSR),
+			       SERDES_MII_BLK);
+
+	switch ((dig >> SPEED_STATUS_SHIFT) & SPEED_STATUS_MASK) {
+	case SPEED_STATUS_10:
+		state->speed = SPEED_10;
+		break;
+	case SPEED_STATUS_100:
+		state->speed = SPEED_100;
+		break;
+	case SPEED_STATUS_1000:
+		state->speed = SPEED_1000;
+		break;
+	default:
+	case SPEED_STATUS_2500:
+		state->speed = SPEED_2500;
+		break;
+	}
+
+	state->duplex = dig & DUPLEX_STATUS ? DUPLEX_FULL : DUPLEX_HALF;
+	state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE);
+	state->link = !!(dig & LINK_STATUS);
+	if (dig & PAUSE_RESOLUTION_RX_SIDE)
+		state->pause |= MLO_PAUSE_RX;
+	if (dig & PAUSE_RESOLUTION_TX_SIDE)
+		state->pause |= MLO_PAUSE_TX;
+}
+
+void b53_serdes_link_set(struct b53_device *dev, int port, unsigned int mode,
+			 phy_interface_t interface, bool link_up)
+{
+	u8 lane = b53_serdes_map_lane(dev, port);
+	u16 reg;
+
+	if (lane == B53_INVALID_LANE)
+		return;
+
+	reg = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMCR),
+			      SERDES_MII_BLK);
+	if (link_up)
+		reg &= ~BMCR_PDOWN;
+	else
+		reg |= BMCR_PDOWN;
+	b53_serdes_write(dev, lane, B53_SERDES_MII_REG(MII_BMCR),
+			 SERDES_MII_BLK, reg);
+}
+EXPORT_SYMBOL(b53_serdes_link_set);
+
+static const struct phylink_pcs_ops b53_pcs_ops = {
+	.pcs_get_state = b53_serdes_get_state,
+	.pcs_config = b53_serdes_config,
+	.pcs_an_restart = b53_serdes_an_restart,
+};
+
+void b53_serdes_phylink_get_caps(struct b53_device *dev, int port,
+				 struct phylink_config *config)
+{
+	u8 lane = b53_serdes_map_lane(dev, port);
+
+	if (lane == B53_INVALID_LANE)
+		return;
+
+	switch (lane) {
+	case 0:
+		/* It appears lane 0 supports 2500base-X and 1000base-X */
+		__set_bit(PHY_INTERFACE_MODE_2500BASEX,
+			  config->supported_interfaces);
+		config->mac_capabilities |= MAC_2500FD;
+		fallthrough;
+	case 1:
+		/* It appears lane 1 only supports 1000base-X and SGMII */
+		__set_bit(PHY_INTERFACE_MODE_1000BASEX,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_SGMII,
+			  config->supported_interfaces);
+		config->mac_capabilities |= MAC_1000FD;
+		break;
+	default:
+		break;
+	}
+}
+EXPORT_SYMBOL(b53_serdes_phylink_get_caps);
+
+struct phylink_pcs *b53_serdes_phylink_mac_select_pcs(struct b53_device *dev,
+						      int port,
+						      phy_interface_t interface)
+{
+	u8 lane = b53_serdes_map_lane(dev, port);
+
+	if (lane == B53_INVALID_LANE || lane >= B53_N_PCS ||
+	    !dev->pcs[lane].dev)
+		return NULL;
+
+	if (!phy_interface_mode_is_8023z(interface) &&
+	    interface != PHY_INTERFACE_MODE_SGMII)
+		return NULL;
+
+	return &dev->pcs[lane].pcs;
+}
+EXPORT_SYMBOL(b53_serdes_phylink_mac_select_pcs);
+
+int b53_serdes_init(struct b53_device *dev, int port)
+{
+	u8 lane = b53_serdes_map_lane(dev, port);
+	struct b53_pcs *pcs;
+	u16 id0, msb, lsb;
+
+	if (lane == B53_INVALID_LANE)
+		return -EINVAL;
+
+	id0 = b53_serdes_read(dev, lane, B53_SERDES_ID0, SERDES_ID0);
+	msb = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_PHYSID1),
+			      SERDES_MII_BLK);
+	lsb = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_PHYSID2),
+			      SERDES_MII_BLK);
+	if (id0 == 0 || id0 == 0xffff) {
+		dev_err(dev->dev, "SerDes not initialized, check settings\n");
+		return -ENODEV;
+	}
+
+	dev_info(dev->dev,
+		 "SerDes lane %d, model: %d, rev %c%d (OUI: 0x%08x)\n",
+		 lane, id0 & SERDES_ID0_MODEL_MASK,
+		 (id0 >> SERDES_ID0_REV_LETTER_SHIFT) + 0x41,
+		 (id0 >> SERDES_ID0_REV_NUM_SHIFT) & SERDES_ID0_REV_NUM_MASK,
+		 (u32)msb << 16 | lsb);
+
+	pcs = &dev->pcs[lane];
+	pcs->dev = dev;
+	pcs->lane = lane;
+	pcs->pcs.ops = &b53_pcs_ops;
+
+	return 0;
+}
+EXPORT_SYMBOL(b53_serdes_init);
+
+MODULE_AUTHOR("Florian Fainelli <f.fainelli@gmail.com>");
+MODULE_DESCRIPTION("B53 Switch SerDes driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/dsa/b53/b53_serdes.h b/drivers/net/dsa/b53/b53_serdes.h
new file mode 100644
index 000000000..ef81f5da5
--- /dev/null
+++ b/drivers/net/dsa/b53/b53_serdes.h
@@ -0,0 +1,124 @@
+/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause */
+/*
+ * Northstar Plus switch SerDes/SGMII PHY definitions
+ *
+ * Copyright (C) 2018 Florian Fainelli <f.fainelli@gmail.com>
+ */
+
+#include <linux/phy.h>
+#include <linux/types.h>
+
+/* Non-standard page used to access SerDes PHY registers on NorthStar Plus */
+#define B53_SERDES_PAGE			0x16
+#define B53_SERDES_BLKADDR		0x3e
+#define B53_SERDES_LANE			0x3c
+
+#define B53_SERDES_ID0			0x20
+#define  SERDES_ID0_MODEL_MASK		0x3f
+#define  SERDES_ID0_REV_NUM_SHIFT	11
+#define  SERDES_ID0_REV_NUM_MASK	0x7
+#define  SERDES_ID0_REV_LETTER_SHIFT	14
+
+#define B53_SERDES_MII_REG(x)		(0x20 + (x) * 2)
+#define B53_SERDES_DIGITAL_CONTROL(x)	(0x1e + (x) * 2)
+#define B53_SERDES_DIGITAL_STATUS	0x28
+
+/* SERDES_DIGITAL_CONTROL1 */
+#define  FIBER_MODE_1000X		BIT(0)
+#define  TBI_INTERFACE			BIT(1)
+#define  SIGNAL_DETECT_EN		BIT(2)
+#define  INVERT_SIGNAL_DETECT		BIT(3)
+#define  AUTODET_EN			BIT(4)
+#define  SGMII_MASTER_MODE		BIT(5)
+#define  DISABLE_DLL_PWRDOWN		BIT(6)
+#define  CRC_CHECKER_DIS		BIT(7)
+#define  COMMA_DET_EN			BIT(8)
+#define  ZERO_COMMA_DET_EN		BIT(9)
+#define  REMOTE_LOOPBACK		BIT(10)
+#define  SEL_RX_PKTS_FOR_CNTR		BIT(11)
+#define  MASTER_MDIO_PHY_SEL		BIT(13)
+#define  DISABLE_SIGNAL_DETECT_FLT	BIT(14)
+
+/* SERDES_DIGITAL_CONTROL2 */
+#define  EN_PARALLEL_DET		BIT(0)
+#define  DIS_FALSE_LINK			BIT(1)
+#define  FLT_FORCE_LINK			BIT(2)
+#define  EN_AUTONEG_ERR_TIMER		BIT(3)
+#define  DIS_REMOTE_FAULT_SENSING	BIT(4)
+#define  FORCE_XMIT_DATA		BIT(5)
+#define  AUTONEG_FAST_TIMERS		BIT(6)
+#define  DIS_CARRIER_EXTEND		BIT(7)
+#define  DIS_TRRR_GENERATION		BIT(8)
+#define  BYPASS_PCS_RX			BIT(9)
+#define  BYPASS_PCS_TX			BIT(10)
+#define  TEST_CNTR_EN			BIT(11)
+#define  TX_PACKET_SEQ_TEST		BIT(12)
+#define  TX_IDLE_JAM_SEQ_TEST		BIT(13)
+#define  CLR_BER_CNTR			BIT(14)
+
+/* SERDES_DIGITAL_CONTROL3 */
+#define  TX_FIFO_RST			BIT(0)
+#define  FIFO_ELAST_TX_RX_SHIFT		1
+#define  FIFO_ELAST_TX_RX_5K		0
+#define  FIFO_ELAST_TX_RX_10K		1
+#define  FIFO_ELAST_TX_RX_13_5K		2
+#define  FIFO_ELAST_TX_RX_18_5K		3
+#define  BLOCK_TXEN_MODE		BIT(9)
+#define  JAM_FALSE_CARRIER_MODE		BIT(10)
+#define  EXT_PHY_CRS_MODE		BIT(11)
+#define  INVERT_EXT_PHY_CRS		BIT(12)
+#define  DISABLE_TX_CRS			BIT(13)
+
+/* SERDES_DIGITAL_STATUS */
+#define  SGMII_MODE			BIT(0)
+#define  LINK_STATUS			BIT(1)
+#define  DUPLEX_STATUS			BIT(2)
+#define  SPEED_STATUS_SHIFT		3
+#define  SPEED_STATUS_10		0
+#define  SPEED_STATUS_100		1
+#define  SPEED_STATUS_1000		2
+#define  SPEED_STATUS_2500		3
+#define  SPEED_STATUS_MASK		SPEED_STATUS_2500
+#define  PAUSE_RESOLUTION_TX_SIDE	BIT(5)
+#define  PAUSE_RESOLUTION_RX_SIDE	BIT(6)
+#define  LINK_STATUS_CHANGE		BIT(7)
+#define  EARLY_END_EXT_DET		BIT(8)
+#define  CARRIER_EXT_ERR_DET		BIT(9)
+#define  RX_ERR_DET			BIT(10)
+#define  TX_ERR_DET			BIT(11)
+#define  CRC_ERR_DET			BIT(12)
+#define  FALSE_CARRIER_ERR_DET		BIT(13)
+#define  RXFIFO_ERR_DET			BIT(14)
+#define  TXFIFO_ERR_DET			BIT(15)
+
+/* Block offsets */
+#define SERDES_DIGITAL_BLK		0x8300
+#define SERDES_ID0			0x8310
+#define SERDES_MII_BLK			0xffe0
+#define SERDES_XGXSBLK0_BLOCKADDRESS	0xffd0
+
+struct phylink_link_state;
+
+static inline u8 b53_serdes_map_lane(struct b53_device *dev, int port)
+{
+	if (!dev->ops->serdes_map_lane)
+		return B53_INVALID_LANE;
+
+	return dev->ops->serdes_map_lane(dev, port);
+}
+
+void b53_serdes_link_set(struct b53_device *dev, int port, unsigned int mode,
+			 phy_interface_t interface, bool link_up);
+struct phylink_pcs *b53_serdes_phylink_mac_select_pcs(struct b53_device *dev,
+						      int port,
+						      phy_interface_t interface);
+void b53_serdes_phylink_get_caps(struct b53_device *dev, int port,
+				 struct phylink_config *config);
+#if IS_ENABLED(CONFIG_B53_SERDES)
+int b53_serdes_init(struct b53_device *dev, int port);
+#else
+static inline int b53_serdes_init(struct b53_device *dev, int port)
+{
+	return -ENODEV;
+}
+#endif
diff --git a/drivers/net/dsa/b53/b53_spi.c b/drivers/net/dsa/b53/b53_spi.c
new file mode 100644
index 000000000..308f15d38
--- /dev/null
+++ b/drivers/net/dsa/b53/b53_spi.c
@@ -0,0 +1,376 @@
+/*
+ * B53 register access through SPI
+ *
+ * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <asm/unaligned.h>
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/platform_data/b53.h>
+
+#include "b53_priv.h"
+
+#define B53_SPI_DATA		0xf0
+
+#define B53_SPI_STATUS		0xfe
+#define B53_SPI_CMD_SPIF	BIT(7)
+#define B53_SPI_CMD_RACK	BIT(5)
+
+#define B53_SPI_CMD_READ	0x00
+#define B53_SPI_CMD_WRITE	0x01
+#define B53_SPI_CMD_NORMAL	0x60
+#define B53_SPI_CMD_FAST	0x10
+
+#define B53_SPI_PAGE_SELECT	0xff
+
+static inline int b53_spi_read_reg(struct spi_device *spi, u8 reg, u8 *val,
+				   unsigned int len)
+{
+	u8 txbuf[2];
+
+	txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_READ;
+	txbuf[1] = reg;
+
+	return spi_write_then_read(spi, txbuf, 2, val, len);
+}
+
+static inline int b53_spi_clear_status(struct spi_device *spi)
+{
+	unsigned int i;
+	u8 rxbuf;
+	int ret;
+
+	for (i = 0; i < 10; i++) {
+		ret = b53_spi_read_reg(spi, B53_SPI_STATUS, &rxbuf, 1);
+		if (ret)
+			return ret;
+
+		if (!(rxbuf & B53_SPI_CMD_SPIF))
+			break;
+
+		mdelay(1);
+	}
+
+	if (i == 10)
+		return -EIO;
+
+	return 0;
+}
+
+static inline int b53_spi_set_page(struct spi_device *spi, u8 page)
+{
+	u8 txbuf[3];
+
+	txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
+	txbuf[1] = B53_SPI_PAGE_SELECT;
+	txbuf[2] = page;
+
+	return spi_write(spi, txbuf, sizeof(txbuf));
+}
+
+static inline int b53_prepare_reg_access(struct spi_device *spi, u8 page)
+{
+	int ret = b53_spi_clear_status(spi);
+
+	if (ret)
+		return ret;
+
+	return b53_spi_set_page(spi, page);
+}
+
+static int b53_spi_prepare_reg_read(struct spi_device *spi, u8 reg)
+{
+	u8 rxbuf;
+	int retry_count;
+	int ret;
+
+	ret = b53_spi_read_reg(spi, reg, &rxbuf, 1);
+	if (ret)
+		return ret;
+
+	for (retry_count = 0; retry_count < 10; retry_count++) {
+		ret = b53_spi_read_reg(spi, B53_SPI_STATUS, &rxbuf, 1);
+		if (ret)
+			return ret;
+
+		if (rxbuf & B53_SPI_CMD_RACK)
+			break;
+
+		mdelay(1);
+	}
+
+	if (retry_count == 10)
+		return -EIO;
+
+	return 0;
+}
+
+static int b53_spi_read(struct b53_device *dev, u8 page, u8 reg, u8 *data,
+			unsigned int len)
+{
+	struct spi_device *spi = dev->priv;
+	int ret;
+
+	ret = b53_prepare_reg_access(spi, page);
+	if (ret)
+		return ret;
+
+	ret = b53_spi_prepare_reg_read(spi, reg);
+	if (ret)
+		return ret;
+
+	return b53_spi_read_reg(spi, B53_SPI_DATA, data, len);
+}
+
+static int b53_spi_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
+{
+	return b53_spi_read(dev, page, reg, val, 1);
+}
+
+static int b53_spi_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
+{
+	__le16 value;
+	int ret;
+
+	ret = b53_spi_read(dev, page, reg, (u8 *)&value, 2);
+
+	if (!ret)
+		*val = le16_to_cpu(value);
+
+	return ret;
+}
+
+static int b53_spi_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
+{
+	__le32 value;
+	int ret;
+
+	ret = b53_spi_read(dev, page, reg, (u8 *)&value, 4);
+
+	if (!ret)
+		*val = le32_to_cpu(value);
+
+	return ret;
+}
+
+static int b53_spi_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+	__le64 value;
+	int ret;
+
+	*val = 0;
+	ret = b53_spi_read(dev, page, reg, (u8 *)&value, 6);
+	if (!ret)
+		*val = le64_to_cpu(value);
+
+	return ret;
+}
+
+static int b53_spi_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+	__le64 value;
+	int ret;
+
+	ret = b53_spi_read(dev, page, reg, (u8 *)&value, 8);
+
+	if (!ret)
+		*val = le64_to_cpu(value);
+
+	return ret;
+}
+
+static int b53_spi_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
+{
+	struct spi_device *spi = dev->priv;
+	int ret;
+	u8 txbuf[3];
+
+	ret = b53_prepare_reg_access(spi, page);
+	if (ret)
+		return ret;
+
+	txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
+	txbuf[1] = reg;
+	txbuf[2] = value;
+
+	return spi_write(spi, txbuf, sizeof(txbuf));
+}
+
+static int b53_spi_write16(struct b53_device *dev, u8 page, u8 reg, u16 value)
+{
+	struct spi_device *spi = dev->priv;
+	int ret;
+	u8 txbuf[4];
+
+	ret = b53_prepare_reg_access(spi, page);
+	if (ret)
+		return ret;
+
+	txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
+	txbuf[1] = reg;
+	put_unaligned_le16(value, &txbuf[2]);
+
+	return spi_write(spi, txbuf, sizeof(txbuf));
+}
+
+static int b53_spi_write32(struct b53_device *dev, u8 page, u8 reg, u32 value)
+{
+	struct spi_device *spi = dev->priv;
+	int ret;
+	u8 txbuf[6];
+
+	ret = b53_prepare_reg_access(spi, page);
+	if (ret)
+		return ret;
+
+	txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
+	txbuf[1] = reg;
+	put_unaligned_le32(value, &txbuf[2]);
+
+	return spi_write(spi, txbuf, sizeof(txbuf));
+}
+
+static int b53_spi_write48(struct b53_device *dev, u8 page, u8 reg, u64 value)
+{
+	struct spi_device *spi = dev->priv;
+	int ret;
+	u8 txbuf[10];
+
+	ret = b53_prepare_reg_access(spi, page);
+	if (ret)
+		return ret;
+
+	txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
+	txbuf[1] = reg;
+	put_unaligned_le64(value, &txbuf[2]);
+
+	return spi_write(spi, txbuf, sizeof(txbuf) - 2);
+}
+
+static int b53_spi_write64(struct b53_device *dev, u8 page, u8 reg, u64 value)
+{
+	struct spi_device *spi = dev->priv;
+	int ret;
+	u8 txbuf[10];
+
+	ret = b53_prepare_reg_access(spi, page);
+	if (ret)
+		return ret;
+
+	txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
+	txbuf[1] = reg;
+	put_unaligned_le64(value, &txbuf[2]);
+
+	return spi_write(spi, txbuf, sizeof(txbuf));
+}
+
+static const struct b53_io_ops b53_spi_ops = {
+	.read8 = b53_spi_read8,
+	.read16 = b53_spi_read16,
+	.read32 = b53_spi_read32,
+	.read48 = b53_spi_read48,
+	.read64 = b53_spi_read64,
+	.write8 = b53_spi_write8,
+	.write16 = b53_spi_write16,
+	.write32 = b53_spi_write32,
+	.write48 = b53_spi_write48,
+	.write64 = b53_spi_write64,
+};
+
+static int b53_spi_probe(struct spi_device *spi)
+{
+	struct b53_device *dev;
+	int ret;
+
+	dev = b53_switch_alloc(&spi->dev, &b53_spi_ops, spi);
+	if (!dev)
+		return -ENOMEM;
+
+	if (spi->dev.platform_data)
+		dev->pdata = spi->dev.platform_data;
+
+	ret = b53_switch_register(dev);
+	if (ret)
+		return ret;
+
+	spi_set_drvdata(spi, dev);
+
+	return 0;
+}
+
+static void b53_spi_remove(struct spi_device *spi)
+{
+	struct b53_device *dev = spi_get_drvdata(spi);
+
+	if (dev)
+		b53_switch_remove(dev);
+}
+
+static void b53_spi_shutdown(struct spi_device *spi)
+{
+	struct b53_device *dev = spi_get_drvdata(spi);
+
+	if (dev)
+		b53_switch_shutdown(dev);
+
+	spi_set_drvdata(spi, NULL);
+}
+
+static const struct of_device_id b53_spi_of_match[] = {
+	{ .compatible = "brcm,bcm5325" },
+	{ .compatible = "brcm,bcm5365" },
+	{ .compatible = "brcm,bcm5395" },
+	{ .compatible = "brcm,bcm5397" },
+	{ .compatible = "brcm,bcm5398" },
+	{ .compatible = "brcm,bcm53115" },
+	{ .compatible = "brcm,bcm53125" },
+	{ .compatible = "brcm,bcm53128" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, b53_spi_of_match);
+
+static const struct spi_device_id b53_spi_ids[] = {
+	{ .name = "bcm5325" },
+	{ .name = "bcm5365" },
+	{ .name = "bcm5395" },
+	{ .name = "bcm5397" },
+	{ .name = "bcm5398" },
+	{ .name = "bcm53115" },
+	{ .name = "bcm53125" },
+	{ .name = "bcm53128" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(spi, b53_spi_ids);
+
+static struct spi_driver b53_spi_driver = {
+	.driver = {
+		.name	= "b53-switch",
+		.of_match_table = b53_spi_of_match,
+	},
+	.probe	= b53_spi_probe,
+	.remove	= b53_spi_remove,
+	.shutdown = b53_spi_shutdown,
+	.id_table = b53_spi_ids,
+};
+
+module_spi_driver(b53_spi_driver);
+
+MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
+MODULE_DESCRIPTION("B53 SPI access driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c
new file mode 100644
index 000000000..bcb440344
--- /dev/null
+++ b/drivers/net/dsa/b53/b53_srab.c
@@ -0,0 +1,698 @@
+/*
+ * B53 register access through Switch Register Access Bridge Registers
+ *
+ * Copyright (C) 2013 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/b53.h>
+#include <linux/of.h>
+
+#include "b53_priv.h"
+#include "b53_serdes.h"
+
+/* command and status register of the SRAB */
+#define B53_SRAB_CMDSTAT		0x2c
+#define  B53_SRAB_CMDSTAT_RST		BIT(2)
+#define  B53_SRAB_CMDSTAT_WRITE		BIT(1)
+#define  B53_SRAB_CMDSTAT_GORDYN	BIT(0)
+#define  B53_SRAB_CMDSTAT_PAGE		24
+#define  B53_SRAB_CMDSTAT_REG		16
+
+/* high order word of write data to switch registe */
+#define B53_SRAB_WD_H			0x30
+
+/* low order word of write data to switch registe */
+#define B53_SRAB_WD_L			0x34
+
+/* high order word of read data from switch register */
+#define B53_SRAB_RD_H			0x38
+
+/* low order word of read data from switch register */
+#define B53_SRAB_RD_L			0x3c
+
+/* command and status register of the SRAB */
+#define B53_SRAB_CTRLS			0x40
+#define  B53_SRAB_CTRLS_HOST_INTR	BIT(1)
+#define  B53_SRAB_CTRLS_RCAREQ		BIT(3)
+#define  B53_SRAB_CTRLS_RCAGNT		BIT(4)
+#define  B53_SRAB_CTRLS_SW_INIT_DONE	BIT(6)
+
+/* the register captures interrupt pulses from the switch */
+#define B53_SRAB_INTR			0x44
+#define  B53_SRAB_INTR_P(x)		BIT(x)
+#define  B53_SRAB_SWITCH_PHY		BIT(8)
+#define  B53_SRAB_1588_SYNC		BIT(9)
+#define  B53_SRAB_IMP1_SLEEP_TIMER	BIT(10)
+#define  B53_SRAB_P7_SLEEP_TIMER	BIT(11)
+#define  B53_SRAB_IMP0_SLEEP_TIMER	BIT(12)
+
+/* Port mux configuration registers */
+#define B53_MUX_CONFIG_P5		0x00
+#define  MUX_CONFIG_SGMII		0
+#define  MUX_CONFIG_MII_LITE		1
+#define  MUX_CONFIG_RGMII		2
+#define  MUX_CONFIG_GMII		3
+#define  MUX_CONFIG_GPHY		4
+#define  MUX_CONFIG_INTERNAL		5
+#define  MUX_CONFIG_MASK		0x7
+#define B53_MUX_CONFIG_P4		0x04
+
+struct b53_srab_port_priv {
+	int irq;
+	bool irq_enabled;
+	struct b53_device *dev;
+	unsigned int num;
+	phy_interface_t mode;
+};
+
+struct b53_srab_priv {
+	void __iomem *regs;
+	void __iomem *mux_config;
+	struct b53_srab_port_priv port_intrs[B53_N_PORTS];
+};
+
+static int b53_srab_request_grant(struct b53_device *dev)
+{
+	struct b53_srab_priv *priv = dev->priv;
+	u8 __iomem *regs = priv->regs;
+	u32 ctrls;
+	int i;
+
+	ctrls = readl(regs + B53_SRAB_CTRLS);
+	ctrls |= B53_SRAB_CTRLS_RCAREQ;
+	writel(ctrls, regs + B53_SRAB_CTRLS);
+
+	for (i = 0; i < 20; i++) {
+		ctrls = readl(regs + B53_SRAB_CTRLS);
+		if (ctrls & B53_SRAB_CTRLS_RCAGNT)
+			break;
+		usleep_range(10, 100);
+	}
+	if (WARN_ON(i == 5))
+		return -EIO;
+
+	return 0;
+}
+
+static void b53_srab_release_grant(struct b53_device *dev)
+{
+	struct b53_srab_priv *priv = dev->priv;
+	u8 __iomem *regs = priv->regs;
+	u32 ctrls;
+
+	ctrls = readl(regs + B53_SRAB_CTRLS);
+	ctrls &= ~B53_SRAB_CTRLS_RCAREQ;
+	writel(ctrls, regs + B53_SRAB_CTRLS);
+}
+
+static int b53_srab_op(struct b53_device *dev, u8 page, u8 reg, u32 op)
+{
+	struct b53_srab_priv *priv = dev->priv;
+	u8 __iomem *regs = priv->regs;
+	int i;
+	u32 cmdstat;
+
+	/* set register address */
+	cmdstat = (page << B53_SRAB_CMDSTAT_PAGE) |
+		  (reg << B53_SRAB_CMDSTAT_REG) |
+		  B53_SRAB_CMDSTAT_GORDYN |
+		  op;
+	writel(cmdstat, regs + B53_SRAB_CMDSTAT);
+
+	/* check if operation completed */
+	for (i = 0; i < 5; ++i) {
+		cmdstat = readl(regs + B53_SRAB_CMDSTAT);
+		if (!(cmdstat & B53_SRAB_CMDSTAT_GORDYN))
+			break;
+		usleep_range(10, 100);
+	}
+
+	if (WARN_ON(i == 5))
+		return -EIO;
+
+	return 0;
+}
+
+static int b53_srab_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
+{
+	struct b53_srab_priv *priv = dev->priv;
+	u8 __iomem *regs = priv->regs;
+	int ret = 0;
+
+	ret = b53_srab_request_grant(dev);
+	if (ret)
+		goto err;
+
+	ret = b53_srab_op(dev, page, reg, 0);
+	if (ret)
+		goto err;
+
+	*val = readl(regs + B53_SRAB_RD_L) & 0xff;
+
+err:
+	b53_srab_release_grant(dev);
+
+	return ret;
+}
+
+static int b53_srab_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
+{
+	struct b53_srab_priv *priv = dev->priv;
+	u8 __iomem *regs = priv->regs;
+	int ret = 0;
+
+	ret = b53_srab_request_grant(dev);
+	if (ret)
+		goto err;
+
+	ret = b53_srab_op(dev, page, reg, 0);
+	if (ret)
+		goto err;
+
+	*val = readl(regs + B53_SRAB_RD_L) & 0xffff;
+
+err:
+	b53_srab_release_grant(dev);
+
+	return ret;
+}
+
+static int b53_srab_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
+{
+	struct b53_srab_priv *priv = dev->priv;
+	u8 __iomem *regs = priv->regs;
+	int ret = 0;
+
+	ret = b53_srab_request_grant(dev);
+	if (ret)
+		goto err;
+
+	ret = b53_srab_op(dev, page, reg, 0);
+	if (ret)
+		goto err;
+
+	*val = readl(regs + B53_SRAB_RD_L);
+
+err:
+	b53_srab_release_grant(dev);
+
+	return ret;
+}
+
+static int b53_srab_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+	struct b53_srab_priv *priv = dev->priv;
+	u8 __iomem *regs = priv->regs;
+	int ret = 0;
+
+	ret = b53_srab_request_grant(dev);
+	if (ret)
+		goto err;
+
+	ret = b53_srab_op(dev, page, reg, 0);
+	if (ret)
+		goto err;
+
+	*val = readl(regs + B53_SRAB_RD_L);
+	*val += ((u64)readl(regs + B53_SRAB_RD_H) & 0xffff) << 32;
+
+err:
+	b53_srab_release_grant(dev);
+
+	return ret;
+}
+
+static int b53_srab_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+	struct b53_srab_priv *priv = dev->priv;
+	u8 __iomem *regs = priv->regs;
+	int ret = 0;
+
+	ret = b53_srab_request_grant(dev);
+	if (ret)
+		goto err;
+
+	ret = b53_srab_op(dev, page, reg, 0);
+	if (ret)
+		goto err;
+
+	*val = readl(regs + B53_SRAB_RD_L);
+	*val += (u64)readl(regs + B53_SRAB_RD_H) << 32;
+
+err:
+	b53_srab_release_grant(dev);
+
+	return ret;
+}
+
+static int b53_srab_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
+{
+	struct b53_srab_priv *priv = dev->priv;
+	u8 __iomem *regs = priv->regs;
+	int ret = 0;
+
+	ret = b53_srab_request_grant(dev);
+	if (ret)
+		goto err;
+
+	writel(value, regs + B53_SRAB_WD_L);
+
+	ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE);
+
+err:
+	b53_srab_release_grant(dev);
+
+	return ret;
+}
+
+static int b53_srab_write16(struct b53_device *dev, u8 page, u8 reg,
+			    u16 value)
+{
+	struct b53_srab_priv *priv = dev->priv;
+	u8 __iomem *regs = priv->regs;
+	int ret = 0;
+
+	ret = b53_srab_request_grant(dev);
+	if (ret)
+		goto err;
+
+	writel(value, regs + B53_SRAB_WD_L);
+
+	ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE);
+
+err:
+	b53_srab_release_grant(dev);
+
+	return ret;
+}
+
+static int b53_srab_write32(struct b53_device *dev, u8 page, u8 reg,
+			    u32 value)
+{
+	struct b53_srab_priv *priv = dev->priv;
+	u8 __iomem *regs = priv->regs;
+	int ret = 0;
+
+	ret = b53_srab_request_grant(dev);
+	if (ret)
+		goto err;
+
+	writel(value, regs + B53_SRAB_WD_L);
+
+	ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE);
+
+err:
+	b53_srab_release_grant(dev);
+
+	return ret;
+}
+
+static int b53_srab_write48(struct b53_device *dev, u8 page, u8 reg,
+			    u64 value)
+{
+	struct b53_srab_priv *priv = dev->priv;
+	u8 __iomem *regs = priv->regs;
+	int ret = 0;
+
+	ret = b53_srab_request_grant(dev);
+	if (ret)
+		goto err;
+
+	writel((u32)value, regs + B53_SRAB_WD_L);
+	writel((u16)(value >> 32), regs + B53_SRAB_WD_H);
+
+	ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE);
+
+err:
+	b53_srab_release_grant(dev);
+
+	return ret;
+}
+
+static int b53_srab_write64(struct b53_device *dev, u8 page, u8 reg,
+			    u64 value)
+{
+	struct b53_srab_priv *priv = dev->priv;
+	u8 __iomem *regs = priv->regs;
+	int ret = 0;
+
+	ret = b53_srab_request_grant(dev);
+	if (ret)
+		goto err;
+
+	writel((u32)value, regs + B53_SRAB_WD_L);
+	writel((u32)(value >> 32), regs + B53_SRAB_WD_H);
+
+	ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE);
+
+err:
+	b53_srab_release_grant(dev);
+
+	return ret;
+}
+
+static irqreturn_t b53_srab_port_thread(int irq, void *dev_id)
+{
+	struct b53_srab_port_priv *port = dev_id;
+	struct b53_device *dev = port->dev;
+
+	if (port->mode == PHY_INTERFACE_MODE_SGMII)
+		b53_port_event(dev->ds, port->num);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t b53_srab_port_isr(int irq, void *dev_id)
+{
+	struct b53_srab_port_priv *port = dev_id;
+	struct b53_device *dev = port->dev;
+	struct b53_srab_priv *priv = dev->priv;
+
+	/* Acknowledge the interrupt */
+	writel(BIT(port->num), priv->regs + B53_SRAB_INTR);
+
+	return IRQ_WAKE_THREAD;
+}
+
+#if IS_ENABLED(CONFIG_B53_SERDES)
+static u8 b53_srab_serdes_map_lane(struct b53_device *dev, int port)
+{
+	struct b53_srab_priv *priv = dev->priv;
+	struct b53_srab_port_priv *p = &priv->port_intrs[port];
+
+	if (p->mode != PHY_INTERFACE_MODE_SGMII)
+		return B53_INVALID_LANE;
+
+	switch (port) {
+	case 5:
+		return 0;
+	case 4:
+		return 1;
+	default:
+		return B53_INVALID_LANE;
+	}
+}
+#endif
+
+static int b53_srab_irq_enable(struct b53_device *dev, int port)
+{
+	struct b53_srab_priv *priv = dev->priv;
+	struct b53_srab_port_priv *p = &priv->port_intrs[port];
+	int ret = 0;
+
+	/* Interrupt is optional and was not specified, do not make
+	 * this fatal
+	 */
+	if (p->irq == -ENXIO)
+		return ret;
+
+	ret = request_threaded_irq(p->irq, b53_srab_port_isr,
+				   b53_srab_port_thread, 0,
+				   dev_name(dev->dev), p);
+	if (!ret)
+		p->irq_enabled = true;
+
+	return ret;
+}
+
+static void b53_srab_irq_disable(struct b53_device *dev, int port)
+{
+	struct b53_srab_priv *priv = dev->priv;
+	struct b53_srab_port_priv *p = &priv->port_intrs[port];
+
+	if (p->irq_enabled) {
+		free_irq(p->irq, p);
+		p->irq_enabled = false;
+	}
+}
+
+static void b53_srab_phylink_get_caps(struct b53_device *dev, int port,
+				      struct phylink_config *config)
+{
+	struct b53_srab_priv *priv = dev->priv;
+	struct b53_srab_port_priv *p = &priv->port_intrs[port];
+
+	switch (p->mode) {
+	case PHY_INTERFACE_MODE_SGMII:
+#if IS_ENABLED(CONFIG_B53_SERDES)
+		/* If p->mode indicates SGMII mode, that essentially means we
+		 * are using a serdes. As the serdes for the capabilities.
+		 */
+		b53_serdes_phylink_get_caps(dev, port, config);
+#endif
+		break;
+
+	case PHY_INTERFACE_MODE_NA:
+		break;
+
+	case PHY_INTERFACE_MODE_RGMII:
+		/* If we support RGMII, support all RGMII modes, since
+		 * that dictates the PHY delay settings.
+		 */
+		phy_interface_set_rgmii(config->supported_interfaces);
+		break;
+
+	default:
+		/* Some other mode (e.g. MII, GMII etc) */
+		__set_bit(p->mode, config->supported_interfaces);
+		break;
+	}
+}
+
+static const struct b53_io_ops b53_srab_ops = {
+	.read8 = b53_srab_read8,
+	.read16 = b53_srab_read16,
+	.read32 = b53_srab_read32,
+	.read48 = b53_srab_read48,
+	.read64 = b53_srab_read64,
+	.write8 = b53_srab_write8,
+	.write16 = b53_srab_write16,
+	.write32 = b53_srab_write32,
+	.write48 = b53_srab_write48,
+	.write64 = b53_srab_write64,
+	.irq_enable = b53_srab_irq_enable,
+	.irq_disable = b53_srab_irq_disable,
+	.phylink_get_caps = b53_srab_phylink_get_caps,
+#if IS_ENABLED(CONFIG_B53_SERDES)
+	.phylink_mac_select_pcs = b53_serdes_phylink_mac_select_pcs,
+	.serdes_map_lane = b53_srab_serdes_map_lane,
+	.serdes_link_set = b53_serdes_link_set,
+#endif
+};
+
+static const struct of_device_id b53_srab_of_match[] = {
+	{ .compatible = "brcm,bcm53010-srab" },
+	{ .compatible = "brcm,bcm53011-srab" },
+	{ .compatible = "brcm,bcm53012-srab" },
+	{ .compatible = "brcm,bcm53018-srab" },
+	{ .compatible = "brcm,bcm53019-srab" },
+	{ .compatible = "brcm,bcm5301x-srab" },
+	{ .compatible = "brcm,bcm11360-srab", .data = (void *)BCM583XX_DEVICE_ID },
+	{ .compatible = "brcm,bcm58522-srab", .data = (void *)BCM58XX_DEVICE_ID },
+	{ .compatible = "brcm,bcm58525-srab", .data = (void *)BCM58XX_DEVICE_ID },
+	{ .compatible = "brcm,bcm58535-srab", .data = (void *)BCM58XX_DEVICE_ID },
+	{ .compatible = "brcm,bcm58622-srab", .data = (void *)BCM58XX_DEVICE_ID },
+	{ .compatible = "brcm,bcm58623-srab", .data = (void *)BCM58XX_DEVICE_ID },
+	{ .compatible = "brcm,bcm58625-srab", .data = (void *)BCM58XX_DEVICE_ID },
+	{ .compatible = "brcm,bcm88312-srab", .data = (void *)BCM58XX_DEVICE_ID },
+	{ .compatible = "brcm,cygnus-srab", .data = (void *)BCM583XX_DEVICE_ID },
+	{ .compatible = "brcm,nsp-srab", .data = (void *)BCM58XX_DEVICE_ID },
+	{ .compatible = "brcm,omega-srab", .data = (void *)BCM583XX_DEVICE_ID },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, b53_srab_of_match);
+
+static void b53_srab_intr_set(struct b53_srab_priv *priv, bool set)
+{
+	u32 reg;
+
+	reg = readl(priv->regs + B53_SRAB_CTRLS);
+	if (set)
+		reg |= B53_SRAB_CTRLS_HOST_INTR;
+	else
+		reg &= ~B53_SRAB_CTRLS_HOST_INTR;
+	writel(reg, priv->regs + B53_SRAB_CTRLS);
+}
+
+static void b53_srab_prepare_irq(struct platform_device *pdev)
+{
+	struct b53_device *dev = platform_get_drvdata(pdev);
+	struct b53_srab_priv *priv = dev->priv;
+	struct b53_srab_port_priv *port;
+	unsigned int i;
+	char *name;
+
+	/* Clear all pending interrupts */
+	writel(0xffffffff, priv->regs + B53_SRAB_INTR);
+
+	for (i = 0; i < B53_N_PORTS; i++) {
+		port = &priv->port_intrs[i];
+
+		/* There is no port 6 */
+		if (i == 6)
+			continue;
+
+		name = kasprintf(GFP_KERNEL, "link_state_p%d", i);
+		if (!name)
+			return;
+
+		port->num = i;
+		port->dev = dev;
+		port->irq = platform_get_irq_byname_optional(pdev, name);
+		kfree(name);
+	}
+
+	b53_srab_intr_set(priv, true);
+}
+
+static void b53_srab_mux_init(struct platform_device *pdev)
+{
+	struct b53_device *dev = platform_get_drvdata(pdev);
+	struct b53_srab_priv *priv = dev->priv;
+	struct b53_srab_port_priv *p;
+	unsigned int port;
+	u32 reg, off = 0;
+	int ret;
+
+	if (dev->pdata && dev->pdata->chip_id != BCM58XX_DEVICE_ID)
+		return;
+
+	priv->mux_config = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(priv->mux_config))
+		return;
+
+	/* Obtain the port mux configuration so we know which lanes
+	 * actually map to SerDes lanes
+	 */
+	for (port = 5; port > 3; port--, off += 4) {
+		p = &priv->port_intrs[port];
+
+		reg = readl(priv->mux_config + B53_MUX_CONFIG_P5 + off);
+		switch (reg & MUX_CONFIG_MASK) {
+		case MUX_CONFIG_SGMII:
+			p->mode = PHY_INTERFACE_MODE_SGMII;
+			ret = b53_serdes_init(dev, port);
+			if (ret)
+				continue;
+			break;
+		case MUX_CONFIG_MII_LITE:
+			p->mode = PHY_INTERFACE_MODE_MII;
+			break;
+		case MUX_CONFIG_GMII:
+			p->mode = PHY_INTERFACE_MODE_GMII;
+			break;
+		case MUX_CONFIG_RGMII:
+			p->mode = PHY_INTERFACE_MODE_RGMII;
+			break;
+		case MUX_CONFIG_INTERNAL:
+			p->mode = PHY_INTERFACE_MODE_INTERNAL;
+			break;
+		default:
+			p->mode = PHY_INTERFACE_MODE_NA;
+			break;
+		}
+
+		if (p->mode != PHY_INTERFACE_MODE_NA)
+			dev_info(&pdev->dev, "Port %d mode: %s\n",
+				 port, phy_modes(p->mode));
+	}
+}
+
+static int b53_srab_probe(struct platform_device *pdev)
+{
+	struct b53_platform_data *pdata = pdev->dev.platform_data;
+	struct device_node *dn = pdev->dev.of_node;
+	const struct of_device_id *of_id = NULL;
+	struct b53_srab_priv *priv;
+	struct b53_device *dev;
+
+	if (dn)
+		of_id = of_match_node(b53_srab_of_match, dn);
+
+	if (of_id) {
+		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+		if (!pdata)
+			return -ENOMEM;
+
+		pdata->chip_id = (u32)(unsigned long)of_id->data;
+	}
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->regs))
+		return PTR_ERR(priv->regs);
+
+	dev = b53_switch_alloc(&pdev->dev, &b53_srab_ops, priv);
+	if (!dev)
+		return -ENOMEM;
+
+	if (pdata)
+		dev->pdata = pdata;
+
+	platform_set_drvdata(pdev, dev);
+
+	b53_srab_prepare_irq(pdev);
+	b53_srab_mux_init(pdev);
+
+	return b53_switch_register(dev);
+}
+
+static int b53_srab_remove(struct platform_device *pdev)
+{
+	struct b53_device *dev = platform_get_drvdata(pdev);
+
+	if (!dev)
+		return 0;
+
+	b53_srab_intr_set(dev->priv, false);
+	b53_switch_remove(dev);
+
+	return 0;
+}
+
+static void b53_srab_shutdown(struct platform_device *pdev)
+{
+	struct b53_device *dev = platform_get_drvdata(pdev);
+
+	if (!dev)
+		return;
+
+	b53_switch_shutdown(dev);
+
+	platform_set_drvdata(pdev, NULL);
+}
+
+static struct platform_driver b53_srab_driver = {
+	.probe = b53_srab_probe,
+	.remove = b53_srab_remove,
+	.shutdown = b53_srab_shutdown,
+	.driver = {
+		.name = "b53-srab-switch",
+		.of_match_table = b53_srab_of_match,
+	},
+};
+
+module_platform_driver(b53_srab_driver);
+MODULE_AUTHOR("Hauke Mehrtens <hauke@hauke-m.de>");
+MODULE_DESCRIPTION("B53 Switch Register Access Bridge Registers (SRAB) access driver");
+MODULE_LICENSE("Dual BSD/GPL");