Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

9 files changed, 11835 insertions, 0 deletions

diff --git a/drivers/net/ethernet/3com/3c509.c b/drivers/net/ethernet/3com/3c509.c
new file mode 100644
index 000000000..fb68339e1
--- /dev/null
+++ b/drivers/net/ethernet/3com/3c509.c
@@ -0,0 +1,1448 @@
+/* 3c509.c: A 3c509 EtherLink3 ethernet driver for linux. */
+/*
+	Written 1993-2000 by Donald Becker.
+
+	Copyright 1994-2000 by Donald Becker.
+	Copyright 1993 United States Government as represented by the
+	Director, National Security Agency.	 This software may be used and
+	distributed according to the terms of the GNU General Public License,
+	incorporated herein by reference.
+
+	This driver is for the 3Com EtherLinkIII series.
+
+	The author may be reached as becker@scyld.com, or C/O
+	Scyld Computing Corporation
+	410 Severn Ave., Suite 210
+	Annapolis MD 21403
+
+	Known limitations:
+	Because of the way 3c509 ISA detection works it's difficult to predict
+	a priori which of several ISA-mode cards will be detected first.
+
+	This driver does not use predictive interrupt mode, resulting in higher
+	packet latency but lower overhead.  If interrupts are disabled for an
+	unusually long time it could also result in missed packets, but in
+	practice this rarely happens.
+
+
+	FIXES:
+		Alan Cox:       Removed the 'Unexpected interrupt' bug.
+		Michael Meskes:	Upgraded to Donald Becker's version 1.07.
+		Alan Cox:	Increased the eeprom delay. Regardless of
+				what the docs say some people definitely
+				get problems with lower (but in card spec)
+				delays
+		v1.10 4/21/97 Fixed module code so that multiple cards may be detected,
+				other cleanups.  -djb
+		Andrea Arcangeli:	Upgraded to Donald Becker's version 1.12.
+		Rick Payne:	Fixed SMP race condition
+		v1.13 9/8/97 Made 'max_interrupt_work' an insmod-settable variable -djb
+		v1.14 10/15/97 Avoided waiting..discard message for fast machines -djb
+		v1.15 1/31/98 Faster recovery for Tx errors. -djb
+		v1.16 2/3/98 Different ID port handling to avoid sound cards. -djb
+		v1.18 12Mar2001 Andrew Morton
+			- Avoid bogus detect of 3c590's (Andrzej Krzysztofowicz)
+			- Reviewed against 1.18 from scyld.com
+		v1.18a 17Nov2001 Jeff Garzik <jgarzik@pobox.com>
+			- ethtool support
+		v1.18b 1Mar2002 Zwane Mwaikambo <zwane@commfireservices.com>
+			- Power Management support
+		v1.18c 1Mar2002 David Ruggiero <jdr@farfalle.com>
+			- Full duplex support
+		v1.19  16Oct2002 Zwane Mwaikambo <zwane@linuxpower.ca>
+			- Additional ethtool features
+		v1.19a 28Oct2002 Davud Ruggiero <jdr@farfalle.com>
+			- Increase *read_eeprom udelay to workaround oops with 2 cards.
+		v1.19b 08Nov2002 Marc Zyngier <maz@wild-wind.fr.eu.org>
+			- Introduce driver model for EISA cards.
+		v1.20  04Feb2008 Ondrej Zary <linux@rainbow-software.org>
+			- convert to isa_driver and pnp_driver and some cleanups
+*/
+
+#define DRV_NAME	"3c509"
+
+/* A few values that may be tweaked. */
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT  (400*HZ/1000)
+
+#include <linux/module.h>
+#include <linux/isa.h>
+#include <linux/pnp.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/in.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/pm.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>	/* for udelay() */
+#include <linux/spinlock.h>
+#include <linux/ethtool.h>
+#include <linux/device.h>
+#include <linux/eisa.h>
+#include <linux/bitops.h>
+
+#include <linux/uaccess.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#ifdef EL3_DEBUG
+static int el3_debug = EL3_DEBUG;
+#else
+static int el3_debug = 2;
+#endif
+
+/* Used to do a global count of all the cards in the system.  Must be
+ * a global variable so that the eisa probe routines can increment
+ * it */
+static int el3_cards = 0;
+#define EL3_MAX_CARDS 8
+
+/* To minimize the size of the driver source I only define operating
+   constants if they are used several times.  You'll need the manual
+   anyway if you want to understand driver details. */
+/* Offsets from base I/O address. */
+#define EL3_DATA 0x00
+#define EL3_CMD 0x0e
+#define EL3_STATUS 0x0e
+#define	EEPROM_READ 0x80
+
+#define EL3_IO_EXTENT	16
+
+#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
+
+
+/* The top five bits written to EL3_CMD are a command, the lower
+   11 bits are the parameter, if applicable. */
+enum c509cmd {
+	TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11,
+	RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, RxDiscard = 8<<11,
+	TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11,
+	FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11,
+	SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11,
+	SetTxThreshold = 18<<11, SetTxStart = 19<<11, StatsEnable = 21<<11,
+	StatsDisable = 22<<11, StopCoax = 23<<11, PowerUp = 27<<11,
+	PowerDown = 28<<11, PowerAuto = 29<<11};
+
+enum c509status {
+	IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004,
+	TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
+	IntReq = 0x0040, StatsFull = 0x0080, CmdBusy = 0x1000, };
+
+/* The SetRxFilter command accepts the following classes: */
+enum RxFilter {
+	RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 };
+
+/* Register window 1 offsets, the window used in normal operation. */
+#define TX_FIFO		0x00
+#define RX_FIFO		0x00
+#define RX_STATUS 	0x08
+#define TX_STATUS 	0x0B
+#define TX_FREE		0x0C		/* Remaining free bytes in Tx buffer. */
+
+#define WN0_CONF_CTRL	0x04		/* Window 0: Configuration control register */
+#define WN0_ADDR_CONF	0x06		/* Window 0: Address configuration register */
+#define WN0_IRQ		0x08		/* Window 0: Set IRQ line in bits 12-15. */
+#define WN4_MEDIA	0x0A		/* Window 4: Various transcvr/media bits. */
+#define	MEDIA_TP	0x00C0		/* Enable link beat and jabber for 10baseT. */
+#define WN4_NETDIAG	0x06		/* Window 4: Net diagnostic */
+#define FD_ENABLE	0x8000		/* Enable full-duplex ("external loopback") */
+
+/*
+ * Must be a power of two (we use a binary and in the
+ * circular queue)
+ */
+#define SKB_QUEUE_SIZE	64
+
+enum el3_cardtype { EL3_ISA, EL3_PNP, EL3_EISA };
+
+struct el3_private {
+	spinlock_t lock;
+	/* skb send-queue */
+	int head, size;
+	struct sk_buff *queue[SKB_QUEUE_SIZE];
+	enum el3_cardtype type;
+};
+static int id_port;
+static int current_tag;
+static struct net_device *el3_devs[EL3_MAX_CARDS];
+
+/* Parameters that may be passed into the module. */
+static int debug = -1;
+static int irq[] = {-1, -1, -1, -1, -1, -1, -1, -1};
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+static int max_interrupt_work = 10;
+#ifdef CONFIG_PNP
+static int nopnp;
+#endif
+
+static int el3_common_init(struct net_device *dev);
+static void el3_common_remove(struct net_device *dev);
+static ushort id_read_eeprom(int index);
+static ushort read_eeprom(int ioaddr, int index);
+static int el3_open(struct net_device *dev);
+static netdev_tx_t el3_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t el3_interrupt(int irq, void *dev_id);
+static void update_stats(struct net_device *dev);
+static struct net_device_stats *el3_get_stats(struct net_device *dev);
+static int el3_rx(struct net_device *dev);
+static int el3_close(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+static void el3_tx_timeout (struct net_device *dev, unsigned int txqueue);
+static void el3_down(struct net_device *dev);
+static void el3_up(struct net_device *dev);
+static const struct ethtool_ops ethtool_ops;
+#ifdef CONFIG_PM
+static int el3_suspend(struct device *, pm_message_t);
+static int el3_resume(struct device *);
+#else
+#define el3_suspend NULL
+#define el3_resume NULL
+#endif
+
+
+/* generic device remove for all device types */
+static int el3_device_remove (struct device *device);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void el3_poll_controller(struct net_device *dev);
+#endif
+
+/* Return 0 on success, 1 on error, 2 when found already detected PnP card */
+static int el3_isa_id_sequence(__be16 *phys_addr)
+{
+	short lrs_state = 0xff;
+	int i;
+
+	/* ISA boards are detected by sending the ID sequence to the
+	   ID_PORT.  We find cards past the first by setting the 'current_tag'
+	   on cards as they are found.  Cards with their tag set will not
+	   respond to subsequent ID sequences. */
+
+	outb(0x00, id_port);
+	outb(0x00, id_port);
+	for (i = 0; i < 255; i++) {
+		outb(lrs_state, id_port);
+		lrs_state <<= 1;
+		lrs_state = lrs_state & 0x100 ? lrs_state ^ 0xcf : lrs_state;
+	}
+	/* For the first probe, clear all board's tag registers. */
+	if (current_tag == 0)
+		outb(0xd0, id_port);
+	else			/* Otherwise kill off already-found boards. */
+		outb(0xd8, id_port);
+	if (id_read_eeprom(7) != 0x6d50)
+		return 1;
+	/* Read in EEPROM data, which does contention-select.
+	   Only the lowest address board will stay "on-line".
+	   3Com got the byte order backwards. */
+	for (i = 0; i < 3; i++)
+		phys_addr[i] = htons(id_read_eeprom(i));
+#ifdef CONFIG_PNP
+	if (!nopnp) {
+		/* The ISA PnP 3c509 cards respond to the ID sequence too.
+		   This check is needed in order not to register them twice. */
+		for (i = 0; i < el3_cards; i++) {
+			struct el3_private *lp = netdev_priv(el3_devs[i]);
+			if (lp->type == EL3_PNP &&
+			    ether_addr_equal((u8 *)phys_addr, el3_devs[i]->dev_addr)) {
+				if (el3_debug > 3)
+					pr_debug("3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n",
+						phys_addr[0] & 0xff, phys_addr[0] >> 8,
+						phys_addr[1] & 0xff, phys_addr[1] >> 8,
+						phys_addr[2] & 0xff, phys_addr[2] >> 8);
+				/* Set the adaptor tag so that the next card can be found. */
+				outb(0xd0 + ++current_tag, id_port);
+				return 2;
+			}
+		}
+	}
+#endif /* CONFIG_PNP */
+	return 0;
+
+}
+
+static void el3_dev_fill(struct net_device *dev, __be16 *phys_addr, int ioaddr,
+			 int irq, int if_port, enum el3_cardtype type)
+{
+	struct el3_private *lp = netdev_priv(dev);
+
+	eth_hw_addr_set(dev, (u8 *)phys_addr);
+	dev->base_addr = ioaddr;
+	dev->irq = irq;
+	dev->if_port = if_port;
+	lp->type = type;
+}
+
+static int el3_isa_match(struct device *pdev, unsigned int ndev)
+{
+	struct net_device *dev;
+	int ioaddr, isa_irq, if_port, err;
+	unsigned int iobase;
+	__be16 phys_addr[3];
+
+	while ((err = el3_isa_id_sequence(phys_addr)) == 2)
+		;	/* Skip to next card when PnP card found */
+	if (err == 1)
+		return 0;
+
+	iobase = id_read_eeprom(8);
+	if_port = iobase >> 14;
+	ioaddr = 0x200 + ((iobase & 0x1f) << 4);
+	if (irq[el3_cards] > 1 && irq[el3_cards] < 16)
+		isa_irq = irq[el3_cards];
+	else
+		isa_irq = id_read_eeprom(9) >> 12;
+
+	dev = alloc_etherdev(sizeof(struct el3_private));
+	if (!dev)
+		return -ENOMEM;
+
+	SET_NETDEV_DEV(dev, pdev);
+
+	if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509-isa")) {
+		free_netdev(dev);
+		return 0;
+	}
+
+	/* Set the adaptor tag so that the next card can be found. */
+	outb(0xd0 + ++current_tag, id_port);
+
+	/* Activate the adaptor at the EEPROM location. */
+	outb((ioaddr >> 4) | 0xe0, id_port);
+
+	EL3WINDOW(0);
+	if (inw(ioaddr) != 0x6d50) {
+		free_netdev(dev);
+		return 0;
+	}
+
+	/* Free the interrupt so that some other card can use it. */
+	outw(0x0f00, ioaddr + WN0_IRQ);
+
+	el3_dev_fill(dev, phys_addr, ioaddr, isa_irq, if_port, EL3_ISA);
+	dev_set_drvdata(pdev, dev);
+	if (el3_common_init(dev)) {
+		free_netdev(dev);
+		return 0;
+	}
+
+	el3_devs[el3_cards++] = dev;
+	return 1;
+}
+
+static void el3_isa_remove(struct device *pdev,
+				    unsigned int ndev)
+{
+	el3_device_remove(pdev);
+	dev_set_drvdata(pdev, NULL);
+}
+
+#ifdef CONFIG_PM
+static int el3_isa_suspend(struct device *dev, unsigned int n,
+			   pm_message_t state)
+{
+	current_tag = 0;
+	return el3_suspend(dev, state);
+}
+
+static int el3_isa_resume(struct device *dev, unsigned int n)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	int ioaddr = ndev->base_addr, err;
+	__be16 phys_addr[3];
+
+	while ((err = el3_isa_id_sequence(phys_addr)) == 2)
+		;	/* Skip to next card when PnP card found */
+	if (err == 1)
+		return 0;
+	/* Set the adaptor tag so that the next card can be found. */
+	outb(0xd0 + ++current_tag, id_port);
+	/* Enable the card */
+	outb((ioaddr >> 4) | 0xe0, id_port);
+	EL3WINDOW(0);
+	if (inw(ioaddr) != 0x6d50)
+		return 1;
+	/* Free the interrupt so that some other card can use it. */
+	outw(0x0f00, ioaddr + WN0_IRQ);
+	return el3_resume(dev);
+}
+#endif
+
+static struct isa_driver el3_isa_driver = {
+	.match		= el3_isa_match,
+	.remove		= el3_isa_remove,
+#ifdef CONFIG_PM
+	.suspend	= el3_isa_suspend,
+	.resume		= el3_isa_resume,
+#endif
+	.driver		= {
+		.name	= "3c509"
+	},
+};
+static int isa_registered;
+
+#ifdef CONFIG_PNP
+static const struct pnp_device_id el3_pnp_ids[] = {
+	{ .id = "TCM5090" }, /* 3Com Etherlink III (TP) */
+	{ .id = "TCM5091" }, /* 3Com Etherlink III */
+	{ .id = "TCM5094" }, /* 3Com Etherlink III (combo) */
+	{ .id = "TCM5095" }, /* 3Com Etherlink III (TPO) */
+	{ .id = "TCM5098" }, /* 3Com Etherlink III (TPC) */
+	{ .id = "PNP80f7" }, /* 3Com Etherlink III compatible */
+	{ .id = "PNP80f8" }, /* 3Com Etherlink III compatible */
+	{ .id = "" }
+};
+MODULE_DEVICE_TABLE(pnp, el3_pnp_ids);
+
+static int el3_pnp_probe(struct pnp_dev *pdev, const struct pnp_device_id *id)
+{
+	short i;
+	int ioaddr, irq, if_port;
+	__be16 phys_addr[3];
+	struct net_device *dev = NULL;
+	int err;
+
+	ioaddr = pnp_port_start(pdev, 0);
+	if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509-pnp"))
+		return -EBUSY;
+	irq = pnp_irq(pdev, 0);
+	EL3WINDOW(0);
+	for (i = 0; i < 3; i++)
+		phys_addr[i] = htons(read_eeprom(ioaddr, i));
+	if_port = read_eeprom(ioaddr, 8) >> 14;
+	dev = alloc_etherdev(sizeof(struct el3_private));
+	if (!dev) {
+		release_region(ioaddr, EL3_IO_EXTENT);
+		return -ENOMEM;
+	}
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	el3_dev_fill(dev, phys_addr, ioaddr, irq, if_port, EL3_PNP);
+	pnp_set_drvdata(pdev, dev);
+	err = el3_common_init(dev);
+
+	if (err) {
+		pnp_set_drvdata(pdev, NULL);
+		free_netdev(dev);
+		return err;
+	}
+
+	el3_devs[el3_cards++] = dev;
+	return 0;
+}
+
+static void el3_pnp_remove(struct pnp_dev *pdev)
+{
+	el3_common_remove(pnp_get_drvdata(pdev));
+	pnp_set_drvdata(pdev, NULL);
+}
+
+#ifdef CONFIG_PM
+static int el3_pnp_suspend(struct pnp_dev *pdev, pm_message_t state)
+{
+	return el3_suspend(&pdev->dev, state);
+}
+
+static int el3_pnp_resume(struct pnp_dev *pdev)
+{
+	return el3_resume(&pdev->dev);
+}
+#endif
+
+static struct pnp_driver el3_pnp_driver = {
+	.name		= "3c509",
+	.id_table	= el3_pnp_ids,
+	.probe		= el3_pnp_probe,
+	.remove		= el3_pnp_remove,
+#ifdef CONFIG_PM
+	.suspend	= el3_pnp_suspend,
+	.resume		= el3_pnp_resume,
+#endif
+};
+static int pnp_registered;
+#endif /* CONFIG_PNP */
+
+#ifdef CONFIG_EISA
+static const struct eisa_device_id el3_eisa_ids[] = {
+		{ "TCM5090" },
+		{ "TCM5091" },
+		{ "TCM5092" },
+		{ "TCM5093" },
+		{ "TCM5094" },
+		{ "TCM5095" },
+		{ "TCM5098" },
+		{ "" }
+};
+MODULE_DEVICE_TABLE(eisa, el3_eisa_ids);
+
+static int el3_eisa_probe (struct device *device);
+
+static struct eisa_driver el3_eisa_driver = {
+		.id_table = el3_eisa_ids,
+		.driver   = {
+				.name    = "3c579",
+				.probe   = el3_eisa_probe,
+				.remove  = el3_device_remove,
+				.suspend = el3_suspend,
+				.resume  = el3_resume,
+		}
+};
+static int eisa_registered;
+#endif
+
+static const struct net_device_ops netdev_ops = {
+	.ndo_open 		= el3_open,
+	.ndo_stop	 	= el3_close,
+	.ndo_start_xmit 	= el3_start_xmit,
+	.ndo_get_stats 		= el3_get_stats,
+	.ndo_set_rx_mode	= set_multicast_list,
+	.ndo_tx_timeout 	= el3_tx_timeout,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= el3_poll_controller,
+#endif
+};
+
+static int el3_common_init(struct net_device *dev)
+{
+	struct el3_private *lp = netdev_priv(dev);
+	int err;
+	static const char * const if_names[] = {
+		"10baseT", "AUI", "undefined", "BNC"
+	};
+
+	spin_lock_init(&lp->lock);
+
+	if (dev->mem_start & 0x05) { /* xcvr codes 1/3/4/12 */
+		dev->if_port = (dev->mem_start & 0x0f);
+	} else { /* xcvr codes 0/8 */
+		/* use eeprom value, but save user's full-duplex selection */
+		dev->if_port |= (dev->mem_start & 0x08);
+	}
+
+	/* The EL3-specific entries in the device structure. */
+	dev->netdev_ops = &netdev_ops;
+	dev->watchdog_timeo = TX_TIMEOUT;
+	dev->ethtool_ops = &ethtool_ops;
+
+	err = register_netdev(dev);
+	if (err) {
+		pr_err("Failed to register 3c5x9 at %#3.3lx, IRQ %d.\n",
+			dev->base_addr, dev->irq);
+		release_region(dev->base_addr, EL3_IO_EXTENT);
+		return err;
+	}
+
+	pr_info("%s: 3c5x9 found at %#3.3lx, %s port, address %pM, IRQ %d.\n",
+	       dev->name, dev->base_addr, if_names[(dev->if_port & 0x03)],
+	       dev->dev_addr, dev->irq);
+
+	return 0;
+
+}
+
+static void el3_common_remove (struct net_device *dev)
+{
+	unregister_netdev (dev);
+	release_region(dev->base_addr, EL3_IO_EXTENT);
+	free_netdev (dev);
+}
+
+#ifdef CONFIG_EISA
+static int el3_eisa_probe(struct device *device)
+{
+	short i;
+	int ioaddr, irq, if_port;
+	__be16 phys_addr[3];
+	struct net_device *dev = NULL;
+	struct eisa_device *edev;
+	int err;
+
+	/* Yeepee, The driver framework is calling us ! */
+	edev = to_eisa_device (device);
+	ioaddr = edev->base_addr;
+
+	if (!request_region(ioaddr, EL3_IO_EXTENT, "3c579-eisa"))
+		return -EBUSY;
+
+	/* Change the register set to the configuration window 0. */
+	outw(SelectWindow | 0, ioaddr + 0xC80 + EL3_CMD);
+
+	irq = inw(ioaddr + WN0_IRQ) >> 12;
+	if_port = inw(ioaddr + 6)>>14;
+	for (i = 0; i < 3; i++)
+		phys_addr[i] = htons(read_eeprom(ioaddr, i));
+
+	/* Restore the "Product ID" to the EEPROM read register. */
+	read_eeprom(ioaddr, 3);
+
+	dev = alloc_etherdev(sizeof (struct el3_private));
+	if (dev == NULL) {
+		release_region(ioaddr, EL3_IO_EXTENT);
+		return -ENOMEM;
+	}
+
+	SET_NETDEV_DEV(dev, device);
+
+	el3_dev_fill(dev, phys_addr, ioaddr, irq, if_port, EL3_EISA);
+	eisa_set_drvdata (edev, dev);
+	err = el3_common_init(dev);
+
+	if (err) {
+		eisa_set_drvdata (edev, NULL);
+		free_netdev(dev);
+		return err;
+	}
+
+	el3_devs[el3_cards++] = dev;
+	return 0;
+}
+#endif
+
+/* This remove works for all device types.
+ *
+ * The net dev must be stored in the driver data field */
+static int el3_device_remove(struct device *device)
+{
+	struct net_device *dev;
+
+	dev = dev_get_drvdata(device);
+
+	el3_common_remove (dev);
+	return 0;
+}
+
+/* Read a word from the EEPROM using the regular EEPROM access register.
+   Assume that we are in register window zero.
+ */
+static ushort read_eeprom(int ioaddr, int index)
+{
+	outw(EEPROM_READ + index, ioaddr + 10);
+	/* Pause for at least 162 us. for the read to take place.
+	   Some chips seem to require much longer */
+	mdelay(2);
+	return inw(ioaddr + 12);
+}
+
+/* Read a word from the EEPROM when in the ISA ID probe state. */
+static ushort id_read_eeprom(int index)
+{
+	int bit, word = 0;
+
+	/* Issue read command, and pause for at least 162 us. for it to complete.
+	   Assume extra-fast 16Mhz bus. */
+	outb(EEPROM_READ + index, id_port);
+
+	/* Pause for at least 162 us. for the read to take place. */
+	/* Some chips seem to require much longer */
+	mdelay(4);
+
+	for (bit = 15; bit >= 0; bit--)
+		word = (word << 1) + (inb(id_port) & 0x01);
+
+	if (el3_debug > 3)
+		pr_debug("  3c509 EEPROM word %d %#4.4x.\n", index, word);
+
+	return word;
+}
+
+
+static int
+el3_open(struct net_device *dev)
+{
+	int ioaddr = dev->base_addr;
+	int i;
+
+	outw(TxReset, ioaddr + EL3_CMD);
+	outw(RxReset, ioaddr + EL3_CMD);
+	outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
+
+	i = request_irq(dev->irq, el3_interrupt, 0, dev->name, dev);
+	if (i)
+		return i;
+
+	EL3WINDOW(0);
+	if (el3_debug > 3)
+		pr_debug("%s: Opening, IRQ %d	 status@%x %4.4x.\n", dev->name,
+			   dev->irq, ioaddr + EL3_STATUS, inw(ioaddr + EL3_STATUS));
+
+	el3_up(dev);
+
+	if (el3_debug > 3)
+		pr_debug("%s: Opened 3c509  IRQ %d  status %4.4x.\n",
+			   dev->name, dev->irq, inw(ioaddr + EL3_STATUS));
+
+	return 0;
+}
+
+static void
+el3_tx_timeout (struct net_device *dev, unsigned int txqueue)
+{
+	int ioaddr = dev->base_addr;
+
+	/* Transmitter timeout, serious problems. */
+	pr_warn("%s: transmit timed out, Tx_status %2.2x status %4.4x Tx FIFO room %d\n",
+		dev->name, inb(ioaddr + TX_STATUS), inw(ioaddr + EL3_STATUS),
+		inw(ioaddr + TX_FREE));
+	dev->stats.tx_errors++;
+	netif_trans_update(dev); /* prevent tx timeout */
+	/* Issue TX_RESET and TX_START commands. */
+	outw(TxReset, ioaddr + EL3_CMD);
+	outw(TxEnable, ioaddr + EL3_CMD);
+	netif_wake_queue(dev);
+}
+
+
+static netdev_tx_t
+el3_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct el3_private *lp = netdev_priv(dev);
+	int ioaddr = dev->base_addr;
+	unsigned long flags;
+
+	netif_stop_queue (dev);
+
+	dev->stats.tx_bytes += skb->len;
+
+	if (el3_debug > 4) {
+		pr_debug("%s: el3_start_xmit(length = %u) called, status %4.4x.\n",
+			   dev->name, skb->len, inw(ioaddr + EL3_STATUS));
+	}
+	/*
+	 *	We lock the driver against other processors. Note
+	 *	we don't need to lock versus the IRQ as we suspended
+	 *	that. This means that we lose the ability to take
+	 *	an RX during a TX upload. That sucks a bit with SMP
+	 *	on an original 3c509 (2K buffer)
+	 *
+	 *	Using disable_irq stops us crapping on other
+	 *	time sensitive devices.
+	 */
+
+	spin_lock_irqsave(&lp->lock, flags);
+
+	/* Put out the doubleword header... */
+	outw(skb->len, ioaddr + TX_FIFO);
+	outw(0x00, ioaddr + TX_FIFO);
+	/* ... and the packet rounded to a doubleword. */
+	outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
+
+	if (inw(ioaddr + TX_FREE) > 1536)
+		netif_start_queue(dev);
+	else
+		/* Interrupt us when the FIFO has room for max-sized packet. */
+		outw(SetTxThreshold + 1536, ioaddr + EL3_CMD);
+
+	spin_unlock_irqrestore(&lp->lock, flags);
+
+	dev_consume_skb_any (skb);
+
+	/* Clear the Tx status stack. */
+	{
+		short tx_status;
+		int i = 4;
+
+		while (--i > 0	&&	(tx_status = inb(ioaddr + TX_STATUS)) > 0) {
+			if (tx_status & 0x38) dev->stats.tx_aborted_errors++;
+			if (tx_status & 0x30) outw(TxReset, ioaddr + EL3_CMD);
+			if (tx_status & 0x3C) outw(TxEnable, ioaddr + EL3_CMD);
+			outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */
+		}
+	}
+	return NETDEV_TX_OK;
+}
+
+/* The EL3 interrupt handler. */
+static irqreturn_t
+el3_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct el3_private *lp;
+	int ioaddr, status;
+	int i = max_interrupt_work;
+
+	lp = netdev_priv(dev);
+	spin_lock(&lp->lock);
+
+	ioaddr = dev->base_addr;
+
+	if (el3_debug > 4) {
+		status = inw(ioaddr + EL3_STATUS);
+		pr_debug("%s: interrupt, status %4.4x.\n", dev->name, status);
+	}
+
+	while ((status = inw(ioaddr + EL3_STATUS)) &
+		   (IntLatch | RxComplete | StatsFull)) {
+
+		if (status & RxComplete)
+			el3_rx(dev);
+
+		if (status & TxAvailable) {
+			if (el3_debug > 5)
+				pr_debug("	TX room bit was handled.\n");
+			/* There's room in the FIFO for a full-sized packet. */
+			outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
+			netif_wake_queue (dev);
+		}
+		if (status & (AdapterFailure | RxEarly | StatsFull | TxComplete)) {
+			/* Handle all uncommon interrupts. */
+			if (status & StatsFull)				/* Empty statistics. */
+				update_stats(dev);
+			if (status & RxEarly) {				/* Rx early is unused. */
+				el3_rx(dev);
+				outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
+			}
+			if (status & TxComplete) {			/* Really Tx error. */
+				short tx_status;
+				int i = 4;
+
+				while (--i>0 && (tx_status = inb(ioaddr + TX_STATUS)) > 0) {
+					if (tx_status & 0x38) dev->stats.tx_aborted_errors++;
+					if (tx_status & 0x30) outw(TxReset, ioaddr + EL3_CMD);
+					if (tx_status & 0x3C) outw(TxEnable, ioaddr + EL3_CMD);
+					outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */
+				}
+			}
+			if (status & AdapterFailure) {
+				/* Adapter failure requires Rx reset and reinit. */
+				outw(RxReset, ioaddr + EL3_CMD);
+				/* Set the Rx filter to the current state. */
+				outw(SetRxFilter | RxStation | RxBroadcast
+					 | (dev->flags & IFF_ALLMULTI ? RxMulticast : 0)
+					 | (dev->flags & IFF_PROMISC ? RxProm : 0),
+					 ioaddr + EL3_CMD);
+				outw(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */
+				outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD);
+			}
+		}
+
+		if (--i < 0) {
+			pr_err("%s: Infinite loop in interrupt, status %4.4x.\n",
+				   dev->name, status);
+			/* Clear all interrupts. */
+			outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
+			break;
+		}
+		/* Acknowledge the IRQ. */
+		outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); /* Ack IRQ */
+	}
+
+	if (el3_debug > 4) {
+		pr_debug("%s: exiting interrupt, status %4.4x.\n", dev->name,
+			   inw(ioaddr + EL3_STATUS));
+	}
+	spin_unlock(&lp->lock);
+	return IRQ_HANDLED;
+}
+
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling receive - used by netconsole and other diagnostic tools
+ * to allow network i/o with interrupts disabled.
+ */
+static void el3_poll_controller(struct net_device *dev)
+{
+	disable_irq(dev->irq);
+	el3_interrupt(dev->irq, dev);
+	enable_irq(dev->irq);
+}
+#endif
+
+static struct net_device_stats *
+el3_get_stats(struct net_device *dev)
+{
+	struct el3_private *lp = netdev_priv(dev);
+	unsigned long flags;
+
+	/*
+	 *	This is fast enough not to bother with disable IRQ
+	 *	stuff.
+	 */
+
+	spin_lock_irqsave(&lp->lock, flags);
+	update_stats(dev);
+	spin_unlock_irqrestore(&lp->lock, flags);
+	return &dev->stats;
+}
+
+/*  Update statistics.  We change to register window 6, so this should be run
+	single-threaded if the device is active. This is expected to be a rare
+	operation, and it's simpler for the rest of the driver to assume that
+	window 1 is always valid rather than use a special window-state variable.
+	*/
+static void update_stats(struct net_device *dev)
+{
+	int ioaddr = dev->base_addr;
+
+	if (el3_debug > 5)
+		pr_debug("   Updating the statistics.\n");
+	/* Turn off statistics updates while reading. */
+	outw(StatsDisable, ioaddr + EL3_CMD);
+	/* Switch to the stats window, and read everything. */
+	EL3WINDOW(6);
+	dev->stats.tx_carrier_errors 	+= inb(ioaddr + 0);
+	dev->stats.tx_heartbeat_errors	+= inb(ioaddr + 1);
+	/* Multiple collisions. */	   inb(ioaddr + 2);
+	dev->stats.collisions		+= inb(ioaddr + 3);
+	dev->stats.tx_window_errors	+= inb(ioaddr + 4);
+	dev->stats.rx_fifo_errors	+= inb(ioaddr + 5);
+	dev->stats.tx_packets		+= inb(ioaddr + 6);
+	/* Rx packets	*/		   inb(ioaddr + 7);
+	/* Tx deferrals */		   inb(ioaddr + 8);
+	inw(ioaddr + 10);	/* Total Rx and Tx octets. */
+	inw(ioaddr + 12);
+
+	/* Back to window 1, and turn statistics back on. */
+	EL3WINDOW(1);
+	outw(StatsEnable, ioaddr + EL3_CMD);
+}
+
+static int
+el3_rx(struct net_device *dev)
+{
+	int ioaddr = dev->base_addr;
+	short rx_status;
+
+	if (el3_debug > 5)
+		pr_debug("   In rx_packet(), status %4.4x, rx_status %4.4x.\n",
+			   inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
+	while ((rx_status = inw(ioaddr + RX_STATUS)) > 0) {
+		if (rx_status & 0x4000) { /* Error, update stats. */
+			short error = rx_status & 0x3800;
+
+			outw(RxDiscard, ioaddr + EL3_CMD);
+			dev->stats.rx_errors++;
+			switch (error) {
+			case 0x0000:		dev->stats.rx_over_errors++; break;
+			case 0x0800:		dev->stats.rx_length_errors++; break;
+			case 0x1000:		dev->stats.rx_frame_errors++; break;
+			case 0x1800:		dev->stats.rx_length_errors++; break;
+			case 0x2000:		dev->stats.rx_frame_errors++; break;
+			case 0x2800:		dev->stats.rx_crc_errors++; break;
+			}
+		} else {
+			short pkt_len = rx_status & 0x7ff;
+			struct sk_buff *skb;
+
+			skb = netdev_alloc_skb(dev, pkt_len + 5);
+			if (el3_debug > 4)
+				pr_debug("Receiving packet size %d status %4.4x.\n",
+					   pkt_len, rx_status);
+			if (skb != NULL) {
+				skb_reserve(skb, 2);     /* Align IP on 16 byte */
+
+				/* 'skb->data' points to the start of sk_buff data area. */
+				insl(ioaddr + RX_FIFO, skb_put(skb,pkt_len),
+					 (pkt_len + 3) >> 2);
+
+				outw(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */
+				skb->protocol = eth_type_trans(skb,dev);
+				netif_rx(skb);
+				dev->stats.rx_bytes += pkt_len;
+				dev->stats.rx_packets++;
+				continue;
+			}
+			outw(RxDiscard, ioaddr + EL3_CMD);
+			dev->stats.rx_dropped++;
+			if (el3_debug)
+				pr_debug("%s: Couldn't allocate a sk_buff of size %d.\n",
+					   dev->name, pkt_len);
+		}
+		inw(ioaddr + EL3_STATUS); 				/* Delay. */
+		while (inw(ioaddr + EL3_STATUS) & 0x1000)
+			pr_debug("	Waiting for 3c509 to discard packet, status %x.\n",
+				   inw(ioaddr + EL3_STATUS) );
+	}
+
+	return 0;
+}
+
+/*
+ *     Set or clear the multicast filter for this adaptor.
+ */
+static void
+set_multicast_list(struct net_device *dev)
+{
+	unsigned long flags;
+	struct el3_private *lp = netdev_priv(dev);
+	int ioaddr = dev->base_addr;
+	int mc_count = netdev_mc_count(dev);
+
+	if (el3_debug > 1) {
+		static int old;
+		if (old != mc_count) {
+			old = mc_count;
+			pr_debug("%s: Setting Rx mode to %d addresses.\n",
+				 dev->name, mc_count);
+		}
+	}
+	spin_lock_irqsave(&lp->lock, flags);
+	if (dev->flags&IFF_PROMISC) {
+		outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm,
+			 ioaddr + EL3_CMD);
+	}
+	else if (mc_count || (dev->flags&IFF_ALLMULTI)) {
+		outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast, ioaddr + EL3_CMD);
+	}
+	else
+		outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD);
+	spin_unlock_irqrestore(&lp->lock, flags);
+}
+
+static int
+el3_close(struct net_device *dev)
+{
+	int ioaddr = dev->base_addr;
+	struct el3_private *lp = netdev_priv(dev);
+
+	if (el3_debug > 2)
+		pr_debug("%s: Shutting down ethercard.\n", dev->name);
+
+	el3_down(dev);
+
+	free_irq(dev->irq, dev);
+	/* Switching back to window 0 disables the IRQ. */
+	EL3WINDOW(0);
+	if (lp->type != EL3_EISA) {
+		/* But we explicitly zero the IRQ line select anyway. Don't do
+		 * it on EISA cards, it prevents the module from getting an
+		 * IRQ after unload+reload... */
+		outw(0x0f00, ioaddr + WN0_IRQ);
+	}
+
+	return 0;
+}
+
+static int
+el3_link_ok(struct net_device *dev)
+{
+	int ioaddr = dev->base_addr;
+	u16 tmp;
+
+	EL3WINDOW(4);
+	tmp = inw(ioaddr + WN4_MEDIA);
+	EL3WINDOW(1);
+	return tmp & (1<<11);
+}
+
+static void
+el3_netdev_get_ecmd(struct net_device *dev, struct ethtool_link_ksettings *cmd)
+{
+	u16 tmp;
+	int ioaddr = dev->base_addr;
+	u32 supported;
+
+	EL3WINDOW(0);
+	/* obtain current transceiver via WN4_MEDIA? */
+	tmp = inw(ioaddr + WN0_ADDR_CONF);
+	switch (tmp >> 14) {
+	case 0:
+		cmd->base.port = PORT_TP;
+		break;
+	case 1:
+		cmd->base.port = PORT_AUI;
+		break;
+	case 3:
+		cmd->base.port = PORT_BNC;
+		break;
+	default:
+		break;
+	}
+
+	cmd->base.duplex = DUPLEX_HALF;
+	supported = 0;
+	tmp = inw(ioaddr + WN0_CONF_CTRL);
+	if (tmp & (1<<13))
+		supported |= SUPPORTED_AUI;
+	if (tmp & (1<<12))
+		supported |= SUPPORTED_BNC;
+	if (tmp & (1<<9)) {
+		supported |= SUPPORTED_TP | SUPPORTED_10baseT_Half |
+				SUPPORTED_10baseT_Full;	/* hmm... */
+		EL3WINDOW(4);
+		tmp = inw(ioaddr + WN4_NETDIAG);
+		if (tmp & FD_ENABLE)
+			cmd->base.duplex = DUPLEX_FULL;
+	}
+
+	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+						supported);
+	cmd->base.speed = SPEED_10;
+	EL3WINDOW(1);
+}
+
+static int
+el3_netdev_set_ecmd(struct net_device *dev,
+		    const struct ethtool_link_ksettings *cmd)
+{
+	u16 tmp;
+	int ioaddr = dev->base_addr;
+
+	if (cmd->base.speed != SPEED_10)
+		return -EINVAL;
+	if ((cmd->base.duplex != DUPLEX_HALF) &&
+	    (cmd->base.duplex != DUPLEX_FULL))
+		return -EINVAL;
+
+	/* change XCVR type */
+	EL3WINDOW(0);
+	tmp = inw(ioaddr + WN0_ADDR_CONF);
+	switch (cmd->base.port) {
+	case PORT_TP:
+		tmp &= ~(3<<14);
+		dev->if_port = 0;
+		break;
+	case PORT_AUI:
+		tmp |= (1<<14);
+		dev->if_port = 1;
+		break;
+	case PORT_BNC:
+		tmp |= (3<<14);
+		dev->if_port = 3;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	outw(tmp, ioaddr + WN0_ADDR_CONF);
+	if (dev->if_port == 3) {
+		/* fire up the DC-DC convertor if BNC gets enabled */
+		tmp = inw(ioaddr + WN0_ADDR_CONF);
+		if (tmp & (3 << 14)) {
+			outw(StartCoax, ioaddr + EL3_CMD);
+			udelay(800);
+		} else
+			return -EIO;
+	}
+
+	EL3WINDOW(4);
+	tmp = inw(ioaddr + WN4_NETDIAG);
+	if (cmd->base.duplex == DUPLEX_FULL)
+		tmp |= FD_ENABLE;
+	else
+		tmp &= ~FD_ENABLE;
+	outw(tmp, ioaddr + WN4_NETDIAG);
+	EL3WINDOW(1);
+
+	return 0;
+}
+
+static void el3_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	strscpy(info->driver, DRV_NAME, sizeof(info->driver));
+}
+
+static int el3_get_link_ksettings(struct net_device *dev,
+				  struct ethtool_link_ksettings *cmd)
+{
+	struct el3_private *lp = netdev_priv(dev);
+
+	spin_lock_irq(&lp->lock);
+	el3_netdev_get_ecmd(dev, cmd);
+	spin_unlock_irq(&lp->lock);
+	return 0;
+}
+
+static int el3_set_link_ksettings(struct net_device *dev,
+				  const struct ethtool_link_ksettings *cmd)
+{
+	struct el3_private *lp = netdev_priv(dev);
+	int ret;
+
+	spin_lock_irq(&lp->lock);
+	ret = el3_netdev_set_ecmd(dev, cmd);
+	spin_unlock_irq(&lp->lock);
+	return ret;
+}
+
+static u32 el3_get_link(struct net_device *dev)
+{
+	struct el3_private *lp = netdev_priv(dev);
+	u32 ret;
+
+	spin_lock_irq(&lp->lock);
+	ret = el3_link_ok(dev);
+	spin_unlock_irq(&lp->lock);
+	return ret;
+}
+
+static u32 el3_get_msglevel(struct net_device *dev)
+{
+	return el3_debug;
+}
+
+static void el3_set_msglevel(struct net_device *dev, u32 v)
+{
+	el3_debug = v;
+}
+
+static const struct ethtool_ops ethtool_ops = {
+	.get_drvinfo = el3_get_drvinfo,
+	.get_link = el3_get_link,
+	.get_msglevel = el3_get_msglevel,
+	.set_msglevel = el3_set_msglevel,
+	.get_link_ksettings = el3_get_link_ksettings,
+	.set_link_ksettings = el3_set_link_ksettings,
+};
+
+static void
+el3_down(struct net_device *dev)
+{
+	int ioaddr = dev->base_addr;
+
+	netif_stop_queue(dev);
+
+	/* Turn off statistics ASAP.  We update lp->stats below. */
+	outw(StatsDisable, ioaddr + EL3_CMD);
+
+	/* Disable the receiver and transmitter. */
+	outw(RxDisable, ioaddr + EL3_CMD);
+	outw(TxDisable, ioaddr + EL3_CMD);
+
+	if (dev->if_port == 3)
+		/* Turn off thinnet power.  Green! */
+		outw(StopCoax, ioaddr + EL3_CMD);
+	else if (dev->if_port == 0) {
+		/* Disable link beat and jabber, if_port may change here next open(). */
+		EL3WINDOW(4);
+		outw(inw(ioaddr + WN4_MEDIA) & ~MEDIA_TP, ioaddr + WN4_MEDIA);
+	}
+
+	outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
+
+	update_stats(dev);
+}
+
+static void
+el3_up(struct net_device *dev)
+{
+	int i, sw_info, net_diag;
+	int ioaddr = dev->base_addr;
+
+	/* Activating the board required and does no harm otherwise */
+	outw(0x0001, ioaddr + 4);
+
+	/* Set the IRQ line. */
+	outw((dev->irq << 12) | 0x0f00, ioaddr + WN0_IRQ);
+
+	/* Set the station address in window 2 each time opened. */
+	EL3WINDOW(2);
+
+	for (i = 0; i < 6; i++)
+		outb(dev->dev_addr[i], ioaddr + i);
+
+	if ((dev->if_port & 0x03) == 3) /* BNC interface */
+		/* Start the thinnet transceiver. We should really wait 50ms...*/
+		outw(StartCoax, ioaddr + EL3_CMD);
+	else if ((dev->if_port & 0x03) == 0) { /* 10baseT interface */
+		/* Combine secondary sw_info word (the adapter level) and primary
+			sw_info word (duplex setting plus other useless bits) */
+		EL3WINDOW(0);
+		sw_info = (read_eeprom(ioaddr, 0x14) & 0x400f) |
+			(read_eeprom(ioaddr, 0x0d) & 0xBff0);
+
+		EL3WINDOW(4);
+		net_diag = inw(ioaddr + WN4_NETDIAG);
+		net_diag = (net_diag | FD_ENABLE); /* temporarily assume full-duplex will be set */
+		pr_info("%s: ", dev->name);
+		switch (dev->if_port & 0x0c) {
+			case 12:
+				/* force full-duplex mode if 3c5x9b */
+				if (sw_info & 0x000f) {
+					pr_cont("Forcing 3c5x9b full-duplex mode");
+					break;
+				}
+				fallthrough;
+			case 8:
+				/* set full-duplex mode based on eeprom config setting */
+				if ((sw_info & 0x000f) && (sw_info & 0x8000)) {
+					pr_cont("Setting 3c5x9b full-duplex mode (from EEPROM configuration bit)");
+					break;
+				}
+				fallthrough;
+			default:
+				/* xcvr=(0 || 4) OR user has an old 3c5x9 non "B" model */
+				pr_cont("Setting 3c5x9/3c5x9B half-duplex mode");
+				net_diag = (net_diag & ~FD_ENABLE); /* disable full duplex */
+		}
+
+		outw(net_diag, ioaddr + WN4_NETDIAG);
+		pr_cont(" if_port: %d, sw_info: %4.4x\n", dev->if_port, sw_info);
+		if (el3_debug > 3)
+			pr_debug("%s: 3c5x9 net diag word is now: %4.4x.\n", dev->name, net_diag);
+		/* Enable link beat and jabber check. */
+		outw(inw(ioaddr + WN4_MEDIA) | MEDIA_TP, ioaddr + WN4_MEDIA);
+	}
+
+	/* Switch to the stats window, and clear all stats by reading. */
+	outw(StatsDisable, ioaddr + EL3_CMD);
+	EL3WINDOW(6);
+	for (i = 0; i < 9; i++)
+		inb(ioaddr + i);
+	inw(ioaddr + 10);
+	inw(ioaddr + 12);
+
+	/* Switch to register set 1 for normal use. */
+	EL3WINDOW(1);
+
+	/* Accept b-case and phys addr only. */
+	outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD);
+	outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
+
+	outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
+	outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
+	/* Allow status bits to be seen. */
+	outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD);
+	/* Ack all pending events, and set active indicator mask. */
+	outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
+		 ioaddr + EL3_CMD);
+	outw(SetIntrEnb | IntLatch|TxAvailable|TxComplete|RxComplete|StatsFull,
+		 ioaddr + EL3_CMD);
+
+	netif_start_queue(dev);
+}
+
+/* Power Management support functions */
+#ifdef CONFIG_PM
+
+static int
+el3_suspend(struct device *pdev, pm_message_t state)
+{
+	unsigned long flags;
+	struct net_device *dev;
+	struct el3_private *lp;
+	int ioaddr;
+
+	dev = dev_get_drvdata(pdev);
+	lp = netdev_priv(dev);
+	ioaddr = dev->base_addr;
+
+	spin_lock_irqsave(&lp->lock, flags);
+
+	if (netif_running(dev))
+		netif_device_detach(dev);
+
+	el3_down(dev);
+	outw(PowerDown, ioaddr + EL3_CMD);
+
+	spin_unlock_irqrestore(&lp->lock, flags);
+	return 0;
+}
+
+static int
+el3_resume(struct device *pdev)
+{
+	unsigned long flags;
+	struct net_device *dev;
+	struct el3_private *lp;
+	int ioaddr;
+
+	dev = dev_get_drvdata(pdev);
+	lp = netdev_priv(dev);
+	ioaddr = dev->base_addr;
+
+	spin_lock_irqsave(&lp->lock, flags);
+
+	outw(PowerUp, ioaddr + EL3_CMD);
+	EL3WINDOW(0);
+	el3_up(dev);
+
+	if (netif_running(dev))
+		netif_device_attach(dev);
+
+	spin_unlock_irqrestore(&lp->lock, flags);
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+module_param(debug,int, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
+module_param(max_interrupt_work, int, 0);
+MODULE_PARM_DESC(debug, "debug level (0-6)");
+MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
+MODULE_PARM_DESC(max_interrupt_work, "maximum events handled per interrupt");
+#ifdef CONFIG_PNP
+module_param(nopnp, int, 0);
+MODULE_PARM_DESC(nopnp, "disable ISA PnP support (0-1)");
+#endif	/* CONFIG_PNP */
+MODULE_DESCRIPTION("3Com Etherlink III (3c509, 3c509B, 3c529, 3c579) ethernet driver");
+MODULE_LICENSE("GPL");
+
+static int __init el3_init_module(void)
+{
+	int ret = 0;
+
+	if (debug >= 0)
+		el3_debug = debug;
+
+#ifdef CONFIG_PNP
+	if (!nopnp) {
+		ret = pnp_register_driver(&el3_pnp_driver);
+		if (!ret)
+			pnp_registered = 1;
+	}
+#endif
+	/* Select an open I/O location at 0x1*0 to do ISA contention select. */
+	/* Start with 0x110 to avoid some sound cards.*/
+	for (id_port = 0x110 ; id_port < 0x200; id_port += 0x10) {
+		if (!request_region(id_port, 1, "3c509-control"))
+			continue;
+		outb(0x00, id_port);
+		outb(0xff, id_port);
+		if (inb(id_port) & 0x01)
+			break;
+		else
+			release_region(id_port, 1);
+	}
+	if (id_port >= 0x200) {
+		id_port = 0;
+		pr_err("No I/O port available for 3c509 activation.\n");
+	} else {
+		ret = isa_register_driver(&el3_isa_driver, EL3_MAX_CARDS);
+		if (!ret)
+			isa_registered = 1;
+	}
+#ifdef CONFIG_EISA
+	ret = eisa_driver_register(&el3_eisa_driver);
+	if (!ret)
+		eisa_registered = 1;
+#endif
+
+#ifdef CONFIG_PNP
+	if (pnp_registered)
+		ret = 0;
+#endif
+	if (isa_registered)
+		ret = 0;
+#ifdef CONFIG_EISA
+	if (eisa_registered)
+		ret = 0;
+#endif
+	return ret;
+}
+
+static void __exit el3_cleanup_module(void)
+{
+#ifdef CONFIG_PNP
+	if (pnp_registered)
+		pnp_unregister_driver(&el3_pnp_driver);
+#endif
+	if (isa_registered)
+		isa_unregister_driver(&el3_isa_driver);
+	if (id_port)
+		release_region(id_port, 1);
+#ifdef CONFIG_EISA
+	if (eisa_registered)
+		eisa_driver_unregister(&el3_eisa_driver);
+#endif
+}
+
+module_init (el3_init_module);
+module_exit (el3_cleanup_module);
diff --git a/drivers/net/ethernet/3com/3c515.c b/drivers/net/ethernet/3com/3c515.c
new file mode 100644
index 000000000..d2f4358cc
--- /dev/null
+++ b/drivers/net/ethernet/3com/3c515.c
@@ -0,0 +1,1567 @@
+/*
+	Written 1997-1998 by Donald Becker.
+
+	This software may be used and distributed according to the terms
+	of the GNU General Public License, incorporated herein by reference.
+
+	This driver is for the 3Com ISA EtherLink XL "Corkscrew" 3c515 ethercard.
+
+	The author may be reached as becker@scyld.com, or C/O
+	Scyld Computing Corporation
+	410 Severn Ave., Suite 210
+	Annapolis MD 21403
+
+
+	2000/2/2- Added support for kernel-level ISAPnP
+		by Stephen Frost <sfrost@snowman.net> and Alessandro Zummo
+	Cleaned up for 2.3.x/softnet by Jeff Garzik and Alan Cox.
+
+	2001/11/17 - Added ethtool support (jgarzik)
+
+	2002/10/28 - Locking updates for 2.5 (alan@lxorguk.ukuu.org.uk)
+
+*/
+
+#define DRV_NAME		"3c515"
+
+#define CORKSCREW 1
+
+/* "Knobs" that adjust features and parameters. */
+/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
+   Setting to > 1512 effectively disables this feature. */
+static int rx_copybreak = 200;
+
+/* Allow setting MTU to a larger size, bypassing the normal ethernet setup. */
+static const int mtu = 1500;
+
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+static int max_interrupt_work = 20;
+
+/* Enable the automatic media selection code -- usually set. */
+#define AUTOMEDIA 1
+
+/* Allow the use of fragment bus master transfers instead of only
+   programmed-I/O for Vortex cards.  Full-bus-master transfers are always
+   enabled by default on Boomerang cards.  If VORTEX_BUS_MASTER is defined,
+   the feature may be turned on using 'options'. */
+#define VORTEX_BUS_MASTER
+
+/* A few values that may be tweaked. */
+/* Keep the ring sizes a power of two for efficiency. */
+#define TX_RING_SIZE	16
+#define RX_RING_SIZE	16
+#define PKT_BUF_SZ		1536	/* Size of each temporary Rx buffer. */
+
+#include <linux/module.h>
+#include <linux/isapnp.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/in.h>
+#include <linux/ioport.h>
+#include <linux/skbuff.h>
+#include <linux/etherdevice.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+
+#include <linux/uaccess.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+#define NEW_MULTICAST
+#include <linux/delay.h>
+
+#define MAX_UNITS 8
+
+MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
+MODULE_DESCRIPTION("3Com 3c515 Corkscrew driver");
+MODULE_LICENSE("GPL");
+
+/* "Knobs" for adjusting internal parameters. */
+/* Put out somewhat more debugging messages. (0 - no msg, 1 minimal msgs). */
+#define DRIVER_DEBUG 1
+/* Some values here only for performance evaluation and path-coverage
+   debugging. */
+static int rx_nocopy, rx_copy, queued_packet;
+
+/* Number of times to check to see if the Tx FIFO has space, used in some
+   limited cases. */
+#define WAIT_TX_AVAIL 200
+
+/* Operational parameter that usually are not changed. */
+#define TX_TIMEOUT  ((4*HZ)/10)	/* Time in jiffies before concluding Tx hung */
+
+/* The size here is somewhat misleading: the Corkscrew also uses the ISA
+   aliased registers at <base>+0x400.
+   */
+#define CORKSCREW_TOTAL_SIZE 0x20
+
+#ifdef DRIVER_DEBUG
+static int corkscrew_debug = DRIVER_DEBUG;
+#else
+static int corkscrew_debug = 1;
+#endif
+
+#define CORKSCREW_ID 10
+
+/*
+				Theory of Operation
+
+I. Board Compatibility
+
+This device driver is designed for the 3Com 3c515 ISA Fast EtherLink XL,
+3Com's ISA bus adapter for Fast Ethernet.  Due to the unique I/O port layout,
+it's not practical to integrate this driver with the other EtherLink drivers.
+
+II. Board-specific settings
+
+The Corkscrew has an EEPROM for configuration, but no special settings are
+needed for Linux.
+
+III. Driver operation
+
+The 3c515 series use an interface that's very similar to the 3c900 "Boomerang"
+PCI cards, with the bus master interface extensively modified to work with
+the ISA bus.
+
+The card is capable of full-bus-master transfers with separate
+lists of transmit and receive descriptors, similar to the AMD LANCE/PCnet,
+DEC Tulip and Intel Speedo3.
+
+This driver uses a "RX_COPYBREAK" scheme rather than a fixed intermediate
+receive buffer.  This scheme allocates full-sized skbuffs as receive
+buffers.  The value RX_COPYBREAK is used as the copying breakpoint: it is
+chosen to trade-off the memory wasted by passing the full-sized skbuff to
+the queue layer for all frames vs. the copying cost of copying a frame to a
+correctly-sized skbuff.
+
+
+IIIC. Synchronization
+The driver runs as two independent, single-threaded flows of control.  One
+is the send-packet routine, which enforces single-threaded use by the netif
+layer.  The other thread is the interrupt handler, which is single
+threaded by the hardware and other software.
+
+IV. Notes
+
+Thanks to Terry Murphy of 3Com for providing documentation and a development
+board.
+
+The names "Vortex", "Boomerang" and "Corkscrew" are the internal 3Com
+project names.  I use these names to eliminate confusion -- 3Com product
+numbers and names are very similar and often confused.
+
+The new chips support both ethernet (1.5K) and FDDI (4.5K) frame sizes!
+This driver only supports ethernet frames because of the recent MTU limit
+of 1.5K, but the changes to support 4.5K are minimal.
+*/
+
+/* Operational definitions.
+   These are not used by other compilation units and thus are not
+   exported in a ".h" file.
+
+   First the windows.  There are eight register windows, with the command
+   and status registers available in each.
+   */
+#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
+#define EL3_CMD 0x0e
+#define EL3_STATUS 0x0e
+
+/* The top five bits written to EL3_CMD are a command, the lower
+   11 bits are the parameter, if applicable.
+   Note that 11 parameters bits was fine for ethernet, but the new chips
+   can handle FDDI length frames (~4500 octets) and now parameters count
+   32-bit 'Dwords' rather than octets. */
+
+enum corkscrew_cmd {
+	TotalReset = 0 << 11, SelectWindow = 1 << 11, StartCoax = 2 << 11,
+	RxDisable = 3 << 11, RxEnable = 4 << 11, RxReset = 5 << 11,
+	UpStall = 6 << 11, UpUnstall = (6 << 11) + 1, DownStall = (6 << 11) + 2,
+	DownUnstall = (6 << 11) + 3, RxDiscard = 8 << 11, TxEnable = 9 << 11,
+	TxDisable = 10 << 11, TxReset = 11 << 11, FakeIntr = 12 << 11,
+	AckIntr = 13 << 11, SetIntrEnb = 14 << 11, SetStatusEnb = 15 << 11,
+	SetRxFilter = 16 << 11, SetRxThreshold = 17 << 11,
+	SetTxThreshold = 18 << 11, SetTxStart = 19 << 11, StartDMAUp = 20 << 11,
+	StartDMADown = (20 << 11) + 1, StatsEnable = 21 << 11,
+	StatsDisable = 22 << 11, StopCoax = 23 << 11,
+};
+
+/* The SetRxFilter command accepts the following classes: */
+enum RxFilter {
+	RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8
+};
+
+/* Bits in the general status register. */
+enum corkscrew_status {
+	IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004,
+	TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
+	IntReq = 0x0040, StatsFull = 0x0080,
+	DMADone = 1 << 8, DownComplete = 1 << 9, UpComplete = 1 << 10,
+	DMAInProgress = 1 << 11,	/* DMA controller is still busy. */
+	CmdInProgress = 1 << 12,	/* EL3_CMD is still busy. */
+};
+
+/* Register window 1 offsets, the window used in normal operation.
+   On the Corkscrew this window is always mapped at offsets 0x10-0x1f. */
+enum Window1 {
+	TX_FIFO = 0x10, RX_FIFO = 0x10, RxErrors = 0x14,
+	RxStatus = 0x18, Timer = 0x1A, TxStatus = 0x1B,
+	TxFree = 0x1C,		/* Remaining free bytes in Tx buffer. */
+};
+enum Window0 {
+	Wn0IRQ = 0x08,
+#if defined(CORKSCREW)
+	Wn0EepromCmd = 0x200A,	/* Corkscrew EEPROM command register. */
+	Wn0EepromData = 0x200C,	/* Corkscrew EEPROM results register. */
+#else
+	Wn0EepromCmd = 10,	/* Window 0: EEPROM command register. */
+	Wn0EepromData = 12,	/* Window 0: EEPROM results register. */
+#endif
+};
+enum Win0_EEPROM_bits {
+	EEPROM_Read = 0x80, EEPROM_WRITE = 0x40, EEPROM_ERASE = 0xC0,
+	EEPROM_EWENB = 0x30,	/* Enable erasing/writing for 10 msec. */
+	EEPROM_EWDIS = 0x00,	/* Disable EWENB before 10 msec timeout. */
+};
+
+/* EEPROM locations. */
+enum eeprom_offset {
+	PhysAddr01 = 0, PhysAddr23 = 1, PhysAddr45 = 2, ModelID = 3,
+	EtherLink3ID = 7,
+};
+
+enum Window3 {			/* Window 3: MAC/config bits. */
+	Wn3_Config = 0, Wn3_MAC_Ctrl = 6, Wn3_Options = 8,
+};
+enum wn3_config {
+	Ram_size = 7,
+	Ram_width = 8,
+	Ram_speed = 0x30,
+	Rom_size = 0xc0,
+	Ram_split_shift = 16,
+	Ram_split = 3 << Ram_split_shift,
+	Xcvr_shift = 20,
+	Xcvr = 7 << Xcvr_shift,
+	Autoselect = 0x1000000,
+};
+
+enum Window4 {
+	Wn4_NetDiag = 6, Wn4_Media = 10,	/* Window 4: Xcvr/media bits. */
+};
+enum Win4_Media_bits {
+	Media_SQE = 0x0008,	/* Enable SQE error counting for AUI. */
+	Media_10TP = 0x00C0,	/* Enable link beat and jabber for 10baseT. */
+	Media_Lnk = 0x0080,	/* Enable just link beat for 100TX/100FX. */
+	Media_LnkBeat = 0x0800,
+};
+enum Window7 {			/* Window 7: Bus Master control. */
+	Wn7_MasterAddr = 0, Wn7_MasterLen = 6, Wn7_MasterStatus = 12,
+};
+
+/* Boomerang-style bus master control registers.  Note ISA aliases! */
+enum MasterCtrl {
+	PktStatus = 0x400, DownListPtr = 0x404, FragAddr = 0x408, FragLen =
+	    0x40c,
+	TxFreeThreshold = 0x40f, UpPktStatus = 0x410, UpListPtr = 0x418,
+};
+
+/* The Rx and Tx descriptor lists.
+   Caution Alpha hackers: these types are 32 bits!  Note also the 8 byte
+   alignment contraint on tx_ring[] and rx_ring[]. */
+struct boom_rx_desc {
+	u32 next;
+	s32 status;
+	u32 addr;
+	s32 length;
+};
+
+/* Values for the Rx status entry. */
+enum rx_desc_status {
+	RxDComplete = 0x00008000, RxDError = 0x4000,
+	/* See boomerang_rx() for actual error bits */
+};
+
+struct boom_tx_desc {
+	u32 next;
+	s32 status;
+	u32 addr;
+	s32 length;
+};
+
+struct corkscrew_private {
+	const char *product_name;
+	struct list_head list;
+	struct net_device *our_dev;
+	/* The Rx and Tx rings are here to keep them quad-word-aligned. */
+	struct boom_rx_desc rx_ring[RX_RING_SIZE];
+	struct boom_tx_desc tx_ring[TX_RING_SIZE];
+	/* The addresses of transmit- and receive-in-place skbuffs. */
+	struct sk_buff *rx_skbuff[RX_RING_SIZE];
+	struct sk_buff *tx_skbuff[TX_RING_SIZE];
+	unsigned int cur_rx, cur_tx;	/* The next free ring entry */
+	unsigned int dirty_rx, dirty_tx;/* The ring entries to be free()ed. */
+	struct sk_buff *tx_skb;	/* Packet being eaten by bus master ctrl.  */
+	struct timer_list timer;	/* Media selection timer. */
+	int capabilities	;	/* Adapter capabilities word. */
+	int options;			/* User-settable misc. driver options. */
+	int last_rx_packets;		/* For media autoselection. */
+	unsigned int available_media:8,	/* From Wn3_Options */
+		media_override:3,	/* Passed-in media type. */
+		default_media:3,	/* Read from the EEPROM. */
+		full_duplex:1, autoselect:1, bus_master:1,	/* Vortex can only do a fragment bus-m. */
+		full_bus_master_tx:1, full_bus_master_rx:1,	/* Boomerang  */
+		tx_full:1;
+	spinlock_t lock;
+	struct device *dev;
+};
+
+/* The action to take with a media selection timer tick.
+   Note that we deviate from the 3Com order by checking 10base2 before AUI.
+ */
+enum xcvr_types {
+	XCVR_10baseT = 0, XCVR_AUI, XCVR_10baseTOnly, XCVR_10base2, XCVR_100baseTx,
+	XCVR_100baseFx, XCVR_MII = 6, XCVR_Default = 8,
+};
+
+static struct media_table {
+	char *name;
+	unsigned int media_bits:16,	/* Bits to set in Wn4_Media register. */
+		mask:8,			/* The transceiver-present bit in Wn3_Config. */
+		next:8;			/* The media type to try next. */
+	short wait;			/* Time before we check media status. */
+} media_tbl[] = {
+	{ "10baseT", Media_10TP, 0x08, XCVR_10base2, (14 * HZ) / 10 },
+	{ "10Mbs AUI", Media_SQE, 0x20, XCVR_Default, (1 * HZ) / 10},
+	{ "undefined", 0, 0x80, XCVR_10baseT, 10000},
+	{ "10base2", 0, 0x10, XCVR_AUI, (1 * HZ) / 10},
+	{ "100baseTX", Media_Lnk, 0x02, XCVR_100baseFx, (14 * HZ) / 10},
+	{ "100baseFX", Media_Lnk, 0x04, XCVR_MII, (14 * HZ) / 10},
+	{ "MII", 0, 0x40, XCVR_10baseT, 3 * HZ},
+	{ "undefined", 0, 0x01, XCVR_10baseT, 10000},
+	{ "Default", 0, 0xFF, XCVR_10baseT, 10000},
+};
+
+#ifdef __ISAPNP__
+static struct isapnp_device_id corkscrew_isapnp_adapters[] = {
+	{	ISAPNP_ANY_ID, ISAPNP_ANY_ID,
+		ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5051),
+		(long) "3Com Fast EtherLink ISA" },
+	{ }	/* terminate list */
+};
+
+MODULE_DEVICE_TABLE(isapnp, corkscrew_isapnp_adapters);
+
+static int nopnp;
+#endif /* __ISAPNP__ */
+
+static struct net_device *corkscrew_scan(int unit);
+static int corkscrew_setup(struct net_device *dev, int ioaddr,
+			    struct pnp_dev *idev, int card_number);
+static int corkscrew_open(struct net_device *dev);
+static void corkscrew_timer(struct timer_list *t);
+static netdev_tx_t corkscrew_start_xmit(struct sk_buff *skb,
+					struct net_device *dev);
+static int corkscrew_rx(struct net_device *dev);
+static void corkscrew_timeout(struct net_device *dev, unsigned int txqueue);
+static int boomerang_rx(struct net_device *dev);
+static irqreturn_t corkscrew_interrupt(int irq, void *dev_id);
+static int corkscrew_close(struct net_device *dev);
+static void update_stats(int addr, struct net_device *dev);
+static struct net_device_stats *corkscrew_get_stats(struct net_device *dev);
+static void set_rx_mode(struct net_device *dev);
+static const struct ethtool_ops netdev_ethtool_ops;
+
+
+/*
+   Unfortunately maximizing the shared code between the integrated and
+   module version of the driver results in a complicated set of initialization
+   procedures.
+   init_module() -- modules /  tc59x_init()  -- built-in
+		The wrappers for corkscrew_scan()
+   corkscrew_scan()  		 The common routine that scans for PCI and EISA cards
+   corkscrew_found_device() Allocate a device structure when we find a card.
+					Different versions exist for modules and built-in.
+   corkscrew_probe1()		Fill in the device structure -- this is separated
+					so that the modules code can put it in dev->init.
+*/
+/* This driver uses 'options' to pass the media type, full-duplex flag, etc. */
+/* Note: this is the only limit on the number of cards supported!! */
+static int options[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1, };
+
+#ifdef MODULE
+static int debug = -1;
+
+module_param(debug, int, 0);
+module_param_array(options, int, NULL, 0);
+module_param(rx_copybreak, int, 0);
+module_param(max_interrupt_work, int, 0);
+MODULE_PARM_DESC(debug, "3c515 debug level (0-6)");
+MODULE_PARM_DESC(options, "3c515: Bits 0-2: media type, bit 3: full duplex, bit 4: bus mastering");
+MODULE_PARM_DESC(rx_copybreak, "3c515 copy breakpoint for copy-only-tiny-frames");
+MODULE_PARM_DESC(max_interrupt_work, "3c515 maximum events handled per interrupt");
+
+/* A list of all installed Vortex devices, for removing the driver module. */
+/* we will need locking (and refcounting) if we ever use it for more */
+static LIST_HEAD(root_corkscrew_dev);
+
+static int corkscrew_init_module(void)
+{
+	int found = 0;
+	if (debug >= 0)
+		corkscrew_debug = debug;
+	while (corkscrew_scan(-1))
+		found++;
+	return found ? 0 : -ENODEV;
+}
+module_init(corkscrew_init_module);
+
+#else
+struct net_device *tc515_probe(int unit)
+{
+	struct net_device *dev = corkscrew_scan(unit);
+
+	if (!dev)
+		return ERR_PTR(-ENODEV);
+
+	return dev;
+}
+#endif				/* not MODULE */
+
+static int check_device(unsigned ioaddr)
+{
+	int timer;
+
+	if (!request_region(ioaddr, CORKSCREW_TOTAL_SIZE, "3c515"))
+		return 0;
+	/* Check the resource configuration for a matching ioaddr. */
+	if ((inw(ioaddr + 0x2002) & 0x1f0) != (ioaddr & 0x1f0)) {
+		release_region(ioaddr, CORKSCREW_TOTAL_SIZE);
+		return 0;
+	}
+	/* Verify by reading the device ID from the EEPROM. */
+	outw(EEPROM_Read + 7, ioaddr + Wn0EepromCmd);
+	/* Pause for at least 162 us. for the read to take place. */
+	for (timer = 4; timer >= 0; timer--) {
+		udelay(162);
+		if ((inw(ioaddr + Wn0EepromCmd) & 0x0200) == 0)
+			break;
+	}
+	if (inw(ioaddr + Wn0EepromData) != 0x6d50) {
+		release_region(ioaddr, CORKSCREW_TOTAL_SIZE);
+		return 0;
+	}
+	return 1;
+}
+
+static void cleanup_card(struct net_device *dev)
+{
+	struct corkscrew_private *vp = netdev_priv(dev);
+	list_del_init(&vp->list);
+	if (dev->dma)
+		free_dma(dev->dma);
+	outw(TotalReset, dev->base_addr + EL3_CMD);
+	release_region(dev->base_addr, CORKSCREW_TOTAL_SIZE);
+	if (vp->dev)
+		pnp_device_detach(to_pnp_dev(vp->dev));
+}
+
+static struct net_device *corkscrew_scan(int unit)
+{
+	struct net_device *dev;
+	static int cards_found = 0;
+	static int ioaddr;
+	int err;
+#ifdef __ISAPNP__
+	short i;
+	static int pnp_cards;
+#endif
+
+	dev = alloc_etherdev(sizeof(struct corkscrew_private));
+	if (!dev)
+		return ERR_PTR(-ENOMEM);
+
+	if (unit >= 0) {
+		sprintf(dev->name, "eth%d", unit);
+		netdev_boot_setup_check(dev);
+	}
+
+#ifdef __ISAPNP__
+	if(nopnp == 1)
+		goto no_pnp;
+	for(i=0; corkscrew_isapnp_adapters[i].vendor != 0; i++) {
+		struct pnp_dev *idev = NULL;
+		int irq;
+		while((idev = pnp_find_dev(NULL,
+					   corkscrew_isapnp_adapters[i].vendor,
+					   corkscrew_isapnp_adapters[i].function,
+					   idev))) {
+
+			if (pnp_device_attach(idev) < 0)
+				continue;
+			if (pnp_activate_dev(idev) < 0) {
+				pr_warn("pnp activate failed (out of resources?)\n");
+				pnp_device_detach(idev);
+				continue;
+			}
+			if (!pnp_port_valid(idev, 0) || !pnp_irq_valid(idev, 0)) {
+				pnp_device_detach(idev);
+				continue;
+			}
+			ioaddr = pnp_port_start(idev, 0);
+			irq = pnp_irq(idev, 0);
+			if (!check_device(ioaddr)) {
+				pnp_device_detach(idev);
+				continue;
+			}
+			if(corkscrew_debug)
+				pr_debug("ISAPNP reports %s at i/o 0x%x, irq %d\n",
+					(char*) corkscrew_isapnp_adapters[i].driver_data, ioaddr, irq);
+			pr_info("3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
+		     		inl(ioaddr + 0x2002), inw(ioaddr + 0x2000));
+			/* irq = inw(ioaddr + 0x2002) & 15; */ /* Use the irq from isapnp */
+			SET_NETDEV_DEV(dev, &idev->dev);
+			pnp_cards++;
+			err = corkscrew_setup(dev, ioaddr, idev, cards_found++);
+			if (!err)
+				return dev;
+			cleanup_card(dev);
+		}
+	}
+no_pnp:
+#endif /* __ISAPNP__ */
+
+	/* Check all locations on the ISA bus -- evil! */
+	for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x20) {
+		if (!check_device(ioaddr))
+			continue;
+
+		pr_info("3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
+		     inl(ioaddr + 0x2002), inw(ioaddr + 0x2000));
+		err = corkscrew_setup(dev, ioaddr, NULL, cards_found++);
+		if (!err)
+			return dev;
+		cleanup_card(dev);
+	}
+	free_netdev(dev);
+	return NULL;
+}
+
+
+static const struct net_device_ops netdev_ops = {
+	.ndo_open		= corkscrew_open,
+	.ndo_stop		= corkscrew_close,
+	.ndo_start_xmit		= corkscrew_start_xmit,
+	.ndo_tx_timeout		= corkscrew_timeout,
+	.ndo_get_stats		= corkscrew_get_stats,
+	.ndo_set_rx_mode	= set_rx_mode,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+
+static int corkscrew_setup(struct net_device *dev, int ioaddr,
+			    struct pnp_dev *idev, int card_number)
+{
+	struct corkscrew_private *vp = netdev_priv(dev);
+	unsigned int eeprom[0x40], checksum = 0;	/* EEPROM contents */
+	__be16 addr[ETH_ALEN / 2];
+	int i;
+	int irq;
+
+#ifdef __ISAPNP__
+	if (idev) {
+		irq = pnp_irq(idev, 0);
+		vp->dev = &idev->dev;
+	} else {
+		irq = inw(ioaddr + 0x2002) & 15;
+	}
+#else
+	irq = inw(ioaddr + 0x2002) & 15;
+#endif
+
+	dev->base_addr = ioaddr;
+	dev->irq = irq;
+	dev->dma = inw(ioaddr + 0x2000) & 7;
+	vp->product_name = "3c515";
+	vp->options = dev->mem_start;
+	vp->our_dev = dev;
+
+	if (!vp->options) {
+		 if (card_number >= MAX_UNITS)
+			vp->options = -1;
+		else
+			vp->options = options[card_number];
+	}
+
+	if (vp->options >= 0) {
+		vp->media_override = vp->options & 7;
+		if (vp->media_override == 2)
+			vp->media_override = 0;
+		vp->full_duplex = (vp->options & 8) ? 1 : 0;
+		vp->bus_master = (vp->options & 16) ? 1 : 0;
+	} else {
+		vp->media_override = 7;
+		vp->full_duplex = 0;
+		vp->bus_master = 0;
+	}
+#ifdef MODULE
+	list_add(&vp->list, &root_corkscrew_dev);
+#endif
+
+	pr_info("%s: 3Com %s at %#3x,", dev->name, vp->product_name, ioaddr);
+
+	spin_lock_init(&vp->lock);
+
+	timer_setup(&vp->timer, corkscrew_timer, 0);
+
+	/* Read the station address from the EEPROM. */
+	EL3WINDOW(0);
+	for (i = 0; i < 0x18; i++) {
+		int timer;
+		outw(EEPROM_Read + i, ioaddr + Wn0EepromCmd);
+		/* Pause for at least 162 us. for the read to take place. */
+		for (timer = 4; timer >= 0; timer--) {
+			udelay(162);
+			if ((inw(ioaddr + Wn0EepromCmd) & 0x0200) == 0)
+				break;
+		}
+		eeprom[i] = inw(ioaddr + Wn0EepromData);
+		checksum ^= eeprom[i];
+		if (i < 3)
+			addr[i] = htons(eeprom[i]);
+	}
+	eth_hw_addr_set(dev, (u8 *)addr);
+	checksum = (checksum ^ (checksum >> 8)) & 0xff;
+	if (checksum != 0x00)
+		pr_cont(" ***INVALID CHECKSUM %4.4x*** ", checksum);
+	pr_cont(" %pM", dev->dev_addr);
+	if (eeprom[16] == 0x11c7) {	/* Corkscrew */
+		if (request_dma(dev->dma, "3c515")) {
+			pr_cont(", DMA %d allocation failed", dev->dma);
+			dev->dma = 0;
+		} else
+			pr_cont(", DMA %d", dev->dma);
+	}
+	pr_cont(", IRQ %d\n", dev->irq);
+	/* Tell them about an invalid IRQ. */
+	if (corkscrew_debug && (dev->irq <= 0 || dev->irq > 15))
+		pr_warn(" *** Warning: this IRQ is unlikely to work! ***\n");
+
+	{
+		static const char * const ram_split[] = {
+			"5:3", "3:1", "1:1", "3:5"
+		};
+		__u32 config;
+		EL3WINDOW(3);
+		vp->available_media = inw(ioaddr + Wn3_Options);
+		config = inl(ioaddr + Wn3_Config);
+		if (corkscrew_debug > 1)
+			pr_info("  Internal config register is %4.4x, transceivers %#x.\n",
+				config, inw(ioaddr + Wn3_Options));
+		pr_info("  %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
+			8 << config & Ram_size,
+			config & Ram_width ? "word" : "byte",
+			ram_split[(config & Ram_split) >> Ram_split_shift],
+			config & Autoselect ? "autoselect/" : "",
+			media_tbl[(config & Xcvr) >> Xcvr_shift].name);
+		vp->default_media = (config & Xcvr) >> Xcvr_shift;
+		vp->autoselect = config & Autoselect ? 1 : 0;
+		dev->if_port = vp->default_media;
+	}
+	if (vp->media_override != 7) {
+		pr_info("  Media override to transceiver type %d (%s).\n",
+		       vp->media_override,
+		       media_tbl[vp->media_override].name);
+		dev->if_port = vp->media_override;
+	}
+
+	vp->capabilities = eeprom[16];
+	vp->full_bus_master_tx = (vp->capabilities & 0x20) ? 1 : 0;
+	/* Rx is broken at 10mbps, so we always disable it. */
+	/* vp->full_bus_master_rx = 0; */
+	vp->full_bus_master_rx = (vp->capabilities & 0x20) ? 1 : 0;
+
+	/* The 3c51x-specific entries in the device structure. */
+	dev->netdev_ops = &netdev_ops;
+	dev->watchdog_timeo = (400 * HZ) / 1000;
+	dev->ethtool_ops = &netdev_ethtool_ops;
+
+	return register_netdev(dev);
+}
+
+
+static int corkscrew_open(struct net_device *dev)
+{
+	int ioaddr = dev->base_addr;
+	struct corkscrew_private *vp = netdev_priv(dev);
+	bool armtimer = false;
+	__u32 config;
+	int i;
+
+	/* Before initializing select the active media port. */
+	EL3WINDOW(3);
+	if (vp->full_duplex)
+		outb(0x20, ioaddr + Wn3_MAC_Ctrl);	/* Set the full-duplex bit. */
+	config = inl(ioaddr + Wn3_Config);
+
+	if (vp->media_override != 7) {
+		if (corkscrew_debug > 1)
+			pr_info("%s: Media override to transceiver %d (%s).\n",
+				dev->name, vp->media_override,
+				media_tbl[vp->media_override].name);
+		dev->if_port = vp->media_override;
+	} else if (vp->autoselect) {
+		/* Find first available media type, starting with 100baseTx. */
+		dev->if_port = 4;
+		while (!(vp->available_media & media_tbl[dev->if_port].mask))
+			dev->if_port = media_tbl[dev->if_port].next;
+
+		if (corkscrew_debug > 1)
+			pr_debug("%s: Initial media type %s.\n",
+			       dev->name, media_tbl[dev->if_port].name);
+		armtimer = true;
+	} else
+		dev->if_port = vp->default_media;
+
+	config = (config & ~Xcvr) | (dev->if_port << Xcvr_shift);
+	outl(config, ioaddr + Wn3_Config);
+
+	if (corkscrew_debug > 1) {
+		pr_debug("%s: corkscrew_open() InternalConfig %8.8x.\n",
+		       dev->name, config);
+	}
+
+	outw(TxReset, ioaddr + EL3_CMD);
+	for (i = 20; i >= 0; i--)
+		if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress))
+			break;
+
+	outw(RxReset, ioaddr + EL3_CMD);
+	/* Wait a few ticks for the RxReset command to complete. */
+	for (i = 20; i >= 0; i--)
+		if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress))
+			break;
+
+	outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
+
+	/* Use the now-standard shared IRQ implementation. */
+	if (vp->capabilities == 0x11c7) {
+		/* Corkscrew: Cannot share ISA resources. */
+		if (dev->irq == 0 ||
+		    dev->dma == 0 ||
+		    request_irq(dev->irq, corkscrew_interrupt, 0,
+				vp->product_name, dev))
+			return -EAGAIN;
+		enable_dma(dev->dma);
+		set_dma_mode(dev->dma, DMA_MODE_CASCADE);
+	} else if (request_irq(dev->irq, corkscrew_interrupt, IRQF_SHARED,
+			       vp->product_name, dev)) {
+		return -EAGAIN;
+	}
+
+	if (armtimer)
+		mod_timer(&vp->timer, jiffies + media_tbl[dev->if_port].wait);
+
+	if (corkscrew_debug > 1) {
+		EL3WINDOW(4);
+		pr_debug("%s: corkscrew_open() irq %d media status %4.4x.\n",
+		       dev->name, dev->irq, inw(ioaddr + Wn4_Media));
+	}
+
+	/* Set the station address and mask in window 2 each time opened. */
+	EL3WINDOW(2);
+	for (i = 0; i < 6; i++)
+		outb(dev->dev_addr[i], ioaddr + i);
+	for (; i < 12; i += 2)
+		outw(0, ioaddr + i);
+
+	if (dev->if_port == 3)
+		/* Start the thinnet transceiver. We should really wait 50ms... */
+		outw(StartCoax, ioaddr + EL3_CMD);
+	EL3WINDOW(4);
+	outw((inw(ioaddr + Wn4_Media) & ~(Media_10TP | Media_SQE)) |
+	     media_tbl[dev->if_port].media_bits, ioaddr + Wn4_Media);
+
+	/* Switch to the stats window, and clear all stats by reading. */
+	outw(StatsDisable, ioaddr + EL3_CMD);
+	EL3WINDOW(6);
+	for (i = 0; i < 10; i++)
+		inb(ioaddr + i);
+	inw(ioaddr + 10);
+	inw(ioaddr + 12);
+	/* New: On the Vortex we must also clear the BadSSD counter. */
+	EL3WINDOW(4);
+	inb(ioaddr + 12);
+	/* ..and on the Boomerang we enable the extra statistics bits. */
+	outw(0x0040, ioaddr + Wn4_NetDiag);
+
+	/* Switch to register set 7 for normal use. */
+	EL3WINDOW(7);
+
+	if (vp->full_bus_master_rx) {	/* Boomerang bus master. */
+		vp->cur_rx = vp->dirty_rx = 0;
+		if (corkscrew_debug > 2)
+			pr_debug("%s:  Filling in the Rx ring.\n", dev->name);
+		for (i = 0; i < RX_RING_SIZE; i++) {
+			struct sk_buff *skb;
+			if (i < (RX_RING_SIZE - 1))
+				vp->rx_ring[i].next =
+				    isa_virt_to_bus(&vp->rx_ring[i + 1]);
+			else
+				vp->rx_ring[i].next = 0;
+			vp->rx_ring[i].status = 0;	/* Clear complete bit. */
+			vp->rx_ring[i].length = PKT_BUF_SZ | 0x80000000;
+			skb = netdev_alloc_skb(dev, PKT_BUF_SZ);
+			vp->rx_skbuff[i] = skb;
+			if (skb == NULL)
+				break;	/* Bad news!  */
+			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
+			vp->rx_ring[i].addr = isa_virt_to_bus(skb->data);
+		}
+		if (i != 0)
+			vp->rx_ring[i - 1].next =
+				isa_virt_to_bus(&vp->rx_ring[0]);	/* Wrap the ring. */
+		outl(isa_virt_to_bus(&vp->rx_ring[0]), ioaddr + UpListPtr);
+	}
+	if (vp->full_bus_master_tx) {	/* Boomerang bus master Tx. */
+		vp->cur_tx = vp->dirty_tx = 0;
+		outb(PKT_BUF_SZ >> 8, ioaddr + TxFreeThreshold);	/* Room for a packet. */
+		/* Clear the Tx ring. */
+		for (i = 0; i < TX_RING_SIZE; i++)
+			vp->tx_skbuff[i] = NULL;
+		outl(0, ioaddr + DownListPtr);
+	}
+	/* Set receiver mode: presumably accept b-case and phys addr only. */
+	set_rx_mode(dev);
+	outw(StatsEnable, ioaddr + EL3_CMD);	/* Turn on statistics. */
+
+	netif_start_queue(dev);
+
+	outw(RxEnable, ioaddr + EL3_CMD);	/* Enable the receiver. */
+	outw(TxEnable, ioaddr + EL3_CMD);	/* Enable transmitter. */
+	/* Allow status bits to be seen. */
+	outw(SetStatusEnb | AdapterFailure | IntReq | StatsFull |
+	     (vp->full_bus_master_tx ? DownComplete : TxAvailable) |
+	     (vp->full_bus_master_rx ? UpComplete : RxComplete) |
+	     (vp->bus_master ? DMADone : 0), ioaddr + EL3_CMD);
+	/* Ack all pending events, and set active indicator mask. */
+	outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
+	     ioaddr + EL3_CMD);
+	outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull
+	     | (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete,
+	     ioaddr + EL3_CMD);
+
+	return 0;
+}
+
+static void corkscrew_timer(struct timer_list *t)
+{
+#ifdef AUTOMEDIA
+	struct corkscrew_private *vp = from_timer(vp, t, timer);
+	struct net_device *dev = vp->our_dev;
+	int ioaddr = dev->base_addr;
+	unsigned long flags;
+	int ok = 0;
+
+	if (corkscrew_debug > 1)
+		pr_debug("%s: Media selection timer tick happened, %s.\n",
+		       dev->name, media_tbl[dev->if_port].name);
+
+	spin_lock_irqsave(&vp->lock, flags);
+
+	{
+		int old_window = inw(ioaddr + EL3_CMD) >> 13;
+		int media_status;
+		EL3WINDOW(4);
+		media_status = inw(ioaddr + Wn4_Media);
+		switch (dev->if_port) {
+		case 0:
+		case 4:
+		case 5:	/* 10baseT, 100baseTX, 100baseFX  */
+			if (media_status & Media_LnkBeat) {
+				ok = 1;
+				if (corkscrew_debug > 1)
+					pr_debug("%s: Media %s has link beat, %x.\n",
+						dev->name,
+						media_tbl[dev->if_port].name,
+						media_status);
+			} else if (corkscrew_debug > 1)
+				pr_debug("%s: Media %s is has no link beat, %x.\n",
+					dev->name,
+					media_tbl[dev->if_port].name,
+					media_status);
+
+			break;
+		default:	/* Other media types handled by Tx timeouts. */
+			if (corkscrew_debug > 1)
+				pr_debug("%s: Media %s is has no indication, %x.\n",
+					dev->name,
+					media_tbl[dev->if_port].name,
+					media_status);
+			ok = 1;
+		}
+		if (!ok) {
+			__u32 config;
+
+			do {
+				dev->if_port =
+				    media_tbl[dev->if_port].next;
+			}
+			while (!(vp->available_media & media_tbl[dev->if_port].mask));
+
+			if (dev->if_port == 8) {	/* Go back to default. */
+				dev->if_port = vp->default_media;
+				if (corkscrew_debug > 1)
+					pr_debug("%s: Media selection failing, using default %s port.\n",
+						dev->name,
+						media_tbl[dev->if_port].name);
+			} else {
+				if (corkscrew_debug > 1)
+					pr_debug("%s: Media selection failed, now trying %s port.\n",
+						dev->name,
+						media_tbl[dev->if_port].name);
+				vp->timer.expires = jiffies + media_tbl[dev->if_port].wait;
+				add_timer(&vp->timer);
+			}
+			outw((media_status & ~(Media_10TP | Media_SQE)) |
+			     media_tbl[dev->if_port].media_bits,
+			     ioaddr + Wn4_Media);
+
+			EL3WINDOW(3);
+			config = inl(ioaddr + Wn3_Config);
+			config = (config & ~Xcvr) | (dev->if_port << Xcvr_shift);
+			outl(config, ioaddr + Wn3_Config);
+
+			outw(dev->if_port == 3 ? StartCoax : StopCoax,
+			     ioaddr + EL3_CMD);
+		}
+		EL3WINDOW(old_window);
+	}
+
+	spin_unlock_irqrestore(&vp->lock, flags);
+	if (corkscrew_debug > 1)
+		pr_debug("%s: Media selection timer finished, %s.\n",
+		       dev->name, media_tbl[dev->if_port].name);
+
+#endif				/* AUTOMEDIA */
+}
+
+static void corkscrew_timeout(struct net_device *dev, unsigned int txqueue)
+{
+	int i;
+	struct corkscrew_private *vp = netdev_priv(dev);
+	int ioaddr = dev->base_addr;
+
+	pr_warn("%s: transmit timed out, tx_status %2.2x status %4.4x\n",
+		dev->name, inb(ioaddr + TxStatus),
+		inw(ioaddr + EL3_STATUS));
+	/* Slight code bloat to be user friendly. */
+	if ((inb(ioaddr + TxStatus) & 0x88) == 0x88)
+		pr_warn("%s: Transmitter encountered 16 collisions -- network cable problem?\n",
+			dev->name);
+#ifndef final_version
+	pr_debug("  Flags; bus-master %d, full %d; dirty %d current %d.\n",
+	       vp->full_bus_master_tx, vp->tx_full, vp->dirty_tx,
+	       vp->cur_tx);
+	pr_debug("  Down list %8.8x vs. %p.\n", inl(ioaddr + DownListPtr),
+	       &vp->tx_ring[0]);
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		pr_debug("  %d: %p  length %8.8x status %8.8x\n", i,
+		       &vp->tx_ring[i],
+		       vp->tx_ring[i].length, vp->tx_ring[i].status);
+	}
+#endif
+	/* Issue TX_RESET and TX_START commands. */
+	outw(TxReset, ioaddr + EL3_CMD);
+	for (i = 20; i >= 0; i--)
+		if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress))
+			break;
+	outw(TxEnable, ioaddr + EL3_CMD);
+	netif_trans_update(dev); /* prevent tx timeout */
+	dev->stats.tx_errors++;
+	dev->stats.tx_dropped++;
+	netif_wake_queue(dev);
+}
+
+static netdev_tx_t corkscrew_start_xmit(struct sk_buff *skb,
+					struct net_device *dev)
+{
+	struct corkscrew_private *vp = netdev_priv(dev);
+	int ioaddr = dev->base_addr;
+
+	/* Block a timer-based transmit from overlapping. */
+
+	netif_stop_queue(dev);
+
+	if (vp->full_bus_master_tx) {	/* BOOMERANG bus-master */
+		/* Calculate the next Tx descriptor entry. */
+		int entry = vp->cur_tx % TX_RING_SIZE;
+		struct boom_tx_desc *prev_entry;
+		unsigned long flags;
+		int i;
+
+		if (vp->tx_full)	/* No room to transmit with */
+			return NETDEV_TX_BUSY;
+		if (vp->cur_tx != 0)
+			prev_entry = &vp->tx_ring[(vp->cur_tx - 1) % TX_RING_SIZE];
+		else
+			prev_entry = NULL;
+		if (corkscrew_debug > 3)
+			pr_debug("%s: Trying to send a packet, Tx index %d.\n",
+				dev->name, vp->cur_tx);
+		/* vp->tx_full = 1; */
+		vp->tx_skbuff[entry] = skb;
+		vp->tx_ring[entry].next = 0;
+		vp->tx_ring[entry].addr = isa_virt_to_bus(skb->data);
+		vp->tx_ring[entry].length = skb->len | 0x80000000;
+		vp->tx_ring[entry].status = skb->len | 0x80000000;
+
+		spin_lock_irqsave(&vp->lock, flags);
+		outw(DownStall, ioaddr + EL3_CMD);
+		/* Wait for the stall to complete. */
+		for (i = 20; i >= 0; i--)
+			if ((inw(ioaddr + EL3_STATUS) & CmdInProgress) == 0)
+				break;
+		if (prev_entry)
+			prev_entry->next = isa_virt_to_bus(&vp->tx_ring[entry]);
+		if (inl(ioaddr + DownListPtr) == 0) {
+			outl(isa_virt_to_bus(&vp->tx_ring[entry]),
+			     ioaddr + DownListPtr);
+			queued_packet++;
+		}
+		outw(DownUnstall, ioaddr + EL3_CMD);
+		spin_unlock_irqrestore(&vp->lock, flags);
+
+		vp->cur_tx++;
+		if (vp->cur_tx - vp->dirty_tx > TX_RING_SIZE - 1)
+			vp->tx_full = 1;
+		else {		/* Clear previous interrupt enable. */
+			if (prev_entry)
+				prev_entry->status &= ~0x80000000;
+			netif_wake_queue(dev);
+		}
+		return NETDEV_TX_OK;
+	}
+	/* Put out the doubleword header... */
+	outl(skb->len, ioaddr + TX_FIFO);
+	dev->stats.tx_bytes += skb->len;
+#ifdef VORTEX_BUS_MASTER
+	if (vp->bus_master) {
+		/* Set the bus-master controller to transfer the packet. */
+		outl(isa_virt_to_bus(skb->data), ioaddr + Wn7_MasterAddr);
+		outw((skb->len + 3) & ~3, ioaddr + Wn7_MasterLen);
+		vp->tx_skb = skb;
+		outw(StartDMADown, ioaddr + EL3_CMD);
+		/* queue will be woken at the DMADone interrupt. */
+	} else {
+		/* ... and the packet rounded to a doubleword. */
+		outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
+		dev_kfree_skb(skb);
+		if (inw(ioaddr + TxFree) > 1536) {
+			netif_wake_queue(dev);
+		} else
+			/* Interrupt us when the FIFO has room for max-sized packet. */
+			outw(SetTxThreshold + (1536 >> 2),
+			     ioaddr + EL3_CMD);
+	}
+#else
+	/* ... and the packet rounded to a doubleword. */
+	outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
+	dev_kfree_skb(skb);
+	if (inw(ioaddr + TxFree) > 1536) {
+		netif_wake_queue(dev);
+	} else
+		/* Interrupt us when the FIFO has room for max-sized packet. */
+		outw(SetTxThreshold + (1536 >> 2), ioaddr + EL3_CMD);
+#endif				/* bus master */
+
+
+	/* Clear the Tx status stack. */
+	{
+		short tx_status;
+		int i = 4;
+
+		while (--i > 0 && (tx_status = inb(ioaddr + TxStatus)) > 0) {
+			if (tx_status & 0x3C) {	/* A Tx-disabling error occurred.  */
+				if (corkscrew_debug > 2)
+					pr_debug("%s: Tx error, status %2.2x.\n",
+						dev->name, tx_status);
+				if (tx_status & 0x04)
+					dev->stats.tx_fifo_errors++;
+				if (tx_status & 0x38)
+					dev->stats.tx_aborted_errors++;
+				if (tx_status & 0x30) {
+					int j;
+					outw(TxReset, ioaddr + EL3_CMD);
+					for (j = 20; j >= 0; j--)
+						if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress))
+							break;
+				}
+				outw(TxEnable, ioaddr + EL3_CMD);
+			}
+			outb(0x00, ioaddr + TxStatus);	/* Pop the status stack. */
+		}
+	}
+	return NETDEV_TX_OK;
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+   after the Tx thread. */
+
+static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
+{
+	/* Use the now-standard shared IRQ implementation. */
+	struct net_device *dev = dev_id;
+	struct corkscrew_private *lp = netdev_priv(dev);
+	int ioaddr, status;
+	int latency;
+	int i = max_interrupt_work;
+
+	ioaddr = dev->base_addr;
+	latency = inb(ioaddr + Timer);
+
+	spin_lock(&lp->lock);
+
+	status = inw(ioaddr + EL3_STATUS);
+
+	if (corkscrew_debug > 4)
+		pr_debug("%s: interrupt, status %4.4x, timer %d.\n",
+			dev->name, status, latency);
+	if ((status & 0xE000) != 0xE000) {
+		static int donedidthis;
+		/* Some interrupt controllers store a bogus interrupt from boot-time.
+		   Ignore a single early interrupt, but don't hang the machine for
+		   other interrupt problems. */
+		if (donedidthis++ > 100) {
+			pr_err("%s: Bogus interrupt, bailing. Status %4.4x, start=%d.\n",
+				   dev->name, status, netif_running(dev));
+			free_irq(dev->irq, dev);
+			dev->irq = -1;
+		}
+	}
+
+	do {
+		if (corkscrew_debug > 5)
+			pr_debug("%s: In interrupt loop, status %4.4x.\n",
+			       dev->name, status);
+		if (status & RxComplete)
+			corkscrew_rx(dev);
+
+		if (status & TxAvailable) {
+			if (corkscrew_debug > 5)
+				pr_debug("	TX room bit was handled.\n");
+			/* There's room in the FIFO for a full-sized packet. */
+			outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
+			netif_wake_queue(dev);
+		}
+		if (status & DownComplete) {
+			unsigned int dirty_tx = lp->dirty_tx;
+
+			while (lp->cur_tx - dirty_tx > 0) {
+				int entry = dirty_tx % TX_RING_SIZE;
+				if (inl(ioaddr + DownListPtr) == isa_virt_to_bus(&lp->tx_ring[entry]))
+					break;	/* It still hasn't been processed. */
+				if (lp->tx_skbuff[entry]) {
+					dev_consume_skb_irq(lp->tx_skbuff[entry]);
+					lp->tx_skbuff[entry] = NULL;
+				}
+				dirty_tx++;
+			}
+			lp->dirty_tx = dirty_tx;
+			outw(AckIntr | DownComplete, ioaddr + EL3_CMD);
+			if (lp->tx_full && (lp->cur_tx - dirty_tx <= TX_RING_SIZE - 1)) {
+				lp->tx_full = 0;
+				netif_wake_queue(dev);
+			}
+		}
+#ifdef VORTEX_BUS_MASTER
+		if (status & DMADone) {
+			outw(0x1000, ioaddr + Wn7_MasterStatus);	/* Ack the event. */
+			dev_consume_skb_irq(lp->tx_skb);	/* Release the transferred buffer */
+			netif_wake_queue(dev);
+		}
+#endif
+		if (status & UpComplete) {
+			boomerang_rx(dev);
+			outw(AckIntr | UpComplete, ioaddr + EL3_CMD);
+		}
+		if (status & (AdapterFailure | RxEarly | StatsFull)) {
+			/* Handle all uncommon interrupts at once. */
+			if (status & RxEarly) {	/* Rx early is unused. */
+				corkscrew_rx(dev);
+				outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
+			}
+			if (status & StatsFull) {	/* Empty statistics. */
+				static int DoneDidThat;
+				if (corkscrew_debug > 4)
+					pr_debug("%s: Updating stats.\n", dev->name);
+				update_stats(ioaddr, dev);
+				/* DEBUG HACK: Disable statistics as an interrupt source. */
+				/* This occurs when we have the wrong media type! */
+				if (DoneDidThat == 0 && inw(ioaddr + EL3_STATUS) & StatsFull) {
+					int win, reg;
+					pr_notice("%s: Updating stats failed, disabling stats as an interrupt source.\n",
+						dev->name);
+					for (win = 0; win < 8; win++) {
+						EL3WINDOW(win);
+						pr_notice("Vortex window %d:", win);
+						for (reg = 0; reg < 16; reg++)
+							pr_cont(" %2.2x", inb(ioaddr + reg));
+						pr_cont("\n");
+					}
+					EL3WINDOW(7);
+					outw(SetIntrEnb | TxAvailable |
+					     RxComplete | AdapterFailure |
+					     UpComplete | DownComplete |
+					     TxComplete, ioaddr + EL3_CMD);
+					DoneDidThat++;
+				}
+			}
+			if (status & AdapterFailure) {
+				/* Adapter failure requires Rx reset and reinit. */
+				outw(RxReset, ioaddr + EL3_CMD);
+				/* Set the Rx filter to the current state. */
+				set_rx_mode(dev);
+				outw(RxEnable, ioaddr + EL3_CMD);	/* Re-enable the receiver. */
+				outw(AckIntr | AdapterFailure,
+				     ioaddr + EL3_CMD);
+			}
+		}
+
+		if (--i < 0) {
+			pr_err("%s: Too much work in interrupt, status %4.4x. Disabling functions (%4.4x).\n",
+				dev->name, status, SetStatusEnb | ((~status) & 0x7FE));
+			/* Disable all pending interrupts. */
+			outw(SetStatusEnb | ((~status) & 0x7FE), ioaddr + EL3_CMD);
+			outw(AckIntr | 0x7FF, ioaddr + EL3_CMD);
+			break;
+		}
+		/* Acknowledge the IRQ. */
+		outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
+
+	} while ((status = inw(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete));
+
+	spin_unlock(&lp->lock);
+
+	if (corkscrew_debug > 4)
+		pr_debug("%s: exiting interrupt, status %4.4x.\n", dev->name, status);
+	return IRQ_HANDLED;
+}
+
+static int corkscrew_rx(struct net_device *dev)
+{
+	int ioaddr = dev->base_addr;
+	int i;
+	short rx_status;
+
+	if (corkscrew_debug > 5)
+		pr_debug("   In rx_packet(), status %4.4x, rx_status %4.4x.\n",
+		     inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus));
+	while ((rx_status = inw(ioaddr + RxStatus)) > 0) {
+		if (rx_status & 0x4000) {	/* Error, update stats. */
+			unsigned char rx_error = inb(ioaddr + RxErrors);
+			if (corkscrew_debug > 2)
+				pr_debug(" Rx error: status %2.2x.\n",
+				       rx_error);
+			dev->stats.rx_errors++;
+			if (rx_error & 0x01)
+				dev->stats.rx_over_errors++;
+			if (rx_error & 0x02)
+				dev->stats.rx_length_errors++;
+			if (rx_error & 0x04)
+				dev->stats.rx_frame_errors++;
+			if (rx_error & 0x08)
+				dev->stats.rx_crc_errors++;
+			if (rx_error & 0x10)
+				dev->stats.rx_length_errors++;
+		} else {
+			/* The packet length: up to 4.5K!. */
+			short pkt_len = rx_status & 0x1fff;
+			struct sk_buff *skb;
+
+			skb = netdev_alloc_skb(dev, pkt_len + 5 + 2);
+			if (corkscrew_debug > 4)
+				pr_debug("Receiving packet size %d status %4.4x.\n",
+				     pkt_len, rx_status);
+			if (skb != NULL) {
+				skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
+				/* 'skb_put()' points to the start of sk_buff data area. */
+				insl(ioaddr + RX_FIFO,
+				     skb_put(skb, pkt_len),
+				     (pkt_len + 3) >> 2);
+				outw(RxDiscard, ioaddr + EL3_CMD);	/* Pop top Rx packet. */
+				skb->protocol = eth_type_trans(skb, dev);
+				netif_rx(skb);
+				dev->stats.rx_packets++;
+				dev->stats.rx_bytes += pkt_len;
+				/* Wait a limited time to go to next packet. */
+				for (i = 200; i >= 0; i--)
+					if (! (inw(ioaddr + EL3_STATUS) & CmdInProgress))
+						break;
+				continue;
+			} else if (corkscrew_debug)
+				pr_debug("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, pkt_len);
+		}
+		outw(RxDiscard, ioaddr + EL3_CMD);
+		dev->stats.rx_dropped++;
+		/* Wait a limited time to skip this packet. */
+		for (i = 200; i >= 0; i--)
+			if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress))
+				break;
+	}
+	return 0;
+}
+
+static int boomerang_rx(struct net_device *dev)
+{
+	struct corkscrew_private *vp = netdev_priv(dev);
+	int entry = vp->cur_rx % RX_RING_SIZE;
+	int ioaddr = dev->base_addr;
+	int rx_status;
+
+	if (corkscrew_debug > 5)
+		pr_debug("   In boomerang_rx(), status %4.4x, rx_status %4.4x.\n",
+			inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus));
+	while ((rx_status = vp->rx_ring[entry].status) & RxDComplete) {
+		if (rx_status & RxDError) {	/* Error, update stats. */
+			unsigned char rx_error = rx_status >> 16;
+			if (corkscrew_debug > 2)
+				pr_debug(" Rx error: status %2.2x.\n",
+				       rx_error);
+			dev->stats.rx_errors++;
+			if (rx_error & 0x01)
+				dev->stats.rx_over_errors++;
+			if (rx_error & 0x02)
+				dev->stats.rx_length_errors++;
+			if (rx_error & 0x04)
+				dev->stats.rx_frame_errors++;
+			if (rx_error & 0x08)
+				dev->stats.rx_crc_errors++;
+			if (rx_error & 0x10)
+				dev->stats.rx_length_errors++;
+		} else {
+			/* The packet length: up to 4.5K!. */
+			short pkt_len = rx_status & 0x1fff;
+			struct sk_buff *skb;
+
+			dev->stats.rx_bytes += pkt_len;
+			if (corkscrew_debug > 4)
+				pr_debug("Receiving packet size %d status %4.4x.\n",
+				     pkt_len, rx_status);
+
+			/* Check if the packet is long enough to just accept without
+			   copying to a properly sized skbuff. */
+			if (pkt_len < rx_copybreak &&
+			    (skb = netdev_alloc_skb(dev, pkt_len + 4)) != NULL) {
+				skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
+				/* 'skb_put()' points to the start of sk_buff data area. */
+				skb_put_data(skb,
+					     isa_bus_to_virt(vp->rx_ring[entry].addr),
+					     pkt_len);
+				rx_copy++;
+			} else {
+				void *temp;
+				/* Pass up the skbuff already on the Rx ring. */
+				skb = vp->rx_skbuff[entry];
+				vp->rx_skbuff[entry] = NULL;
+				temp = skb_put(skb, pkt_len);
+				/* Remove this checking code for final release. */
+				if (isa_bus_to_virt(vp->rx_ring[entry].addr) != temp)
+					pr_warn("%s: Warning -- the skbuff addresses do not match in boomerang_rx: %p vs. %p / %p\n",
+						dev->name,
+						isa_bus_to_virt(vp->rx_ring[entry].addr),
+						skb->head, temp);
+				rx_nocopy++;
+			}
+			skb->protocol = eth_type_trans(skb, dev);
+			netif_rx(skb);
+			dev->stats.rx_packets++;
+		}
+		entry = (++vp->cur_rx) % RX_RING_SIZE;
+	}
+	/* Refill the Rx ring buffers. */
+	for (; vp->cur_rx - vp->dirty_rx > 0; vp->dirty_rx++) {
+		struct sk_buff *skb;
+		entry = vp->dirty_rx % RX_RING_SIZE;
+		if (vp->rx_skbuff[entry] == NULL) {
+			skb = netdev_alloc_skb(dev, PKT_BUF_SZ);
+			if (skb == NULL)
+				break;	/* Bad news!  */
+			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
+			vp->rx_ring[entry].addr = isa_virt_to_bus(skb->data);
+			vp->rx_skbuff[entry] = skb;
+		}
+		vp->rx_ring[entry].status = 0;	/* Clear complete bit. */
+	}
+	return 0;
+}
+
+static int corkscrew_close(struct net_device *dev)
+{
+	struct corkscrew_private *vp = netdev_priv(dev);
+	int ioaddr = dev->base_addr;
+	int i;
+
+	netif_stop_queue(dev);
+
+	if (corkscrew_debug > 1) {
+		pr_debug("%s: corkscrew_close() status %4.4x, Tx status %2.2x.\n",
+		     dev->name, inw(ioaddr + EL3_STATUS),
+		     inb(ioaddr + TxStatus));
+		pr_debug("%s: corkscrew close stats: rx_nocopy %d rx_copy %d tx_queued %d.\n",
+			dev->name, rx_nocopy, rx_copy, queued_packet);
+	}
+
+	del_timer_sync(&vp->timer);
+
+	/* Turn off statistics ASAP.  We update lp->stats below. */
+	outw(StatsDisable, ioaddr + EL3_CMD);
+
+	/* Disable the receiver and transmitter. */
+	outw(RxDisable, ioaddr + EL3_CMD);
+	outw(TxDisable, ioaddr + EL3_CMD);
+
+	if (dev->if_port == XCVR_10base2)
+		/* Turn off thinnet power.  Green! */
+		outw(StopCoax, ioaddr + EL3_CMD);
+
+	free_irq(dev->irq, dev);
+
+	outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
+
+	update_stats(ioaddr, dev);
+	if (vp->full_bus_master_rx) {	/* Free Boomerang bus master Rx buffers. */
+		outl(0, ioaddr + UpListPtr);
+		for (i = 0; i < RX_RING_SIZE; i++)
+			if (vp->rx_skbuff[i]) {
+				dev_kfree_skb(vp->rx_skbuff[i]);
+				vp->rx_skbuff[i] = NULL;
+			}
+	}
+	if (vp->full_bus_master_tx) {	/* Free Boomerang bus master Tx buffers. */
+		outl(0, ioaddr + DownListPtr);
+		for (i = 0; i < TX_RING_SIZE; i++)
+			if (vp->tx_skbuff[i]) {
+				dev_kfree_skb(vp->tx_skbuff[i]);
+				vp->tx_skbuff[i] = NULL;
+			}
+	}
+
+	return 0;
+}
+
+static struct net_device_stats *corkscrew_get_stats(struct net_device *dev)
+{
+	struct corkscrew_private *vp = netdev_priv(dev);
+	unsigned long flags;
+
+	if (netif_running(dev)) {
+		spin_lock_irqsave(&vp->lock, flags);
+		update_stats(dev->base_addr, dev);
+		spin_unlock_irqrestore(&vp->lock, flags);
+	}
+	return &dev->stats;
+}
+
+/*  Update statistics.
+	Unlike with the EL3 we need not worry about interrupts changing
+	the window setting from underneath us, but we must still guard
+	against a race condition with a StatsUpdate interrupt updating the
+	table.  This is done by checking that the ASM (!) code generated uses
+	atomic updates with '+='.
+	*/
+static void update_stats(int ioaddr, struct net_device *dev)
+{
+	/* Unlike the 3c5x9 we need not turn off stats updates while reading. */
+	/* Switch to the stats window, and read everything. */
+	EL3WINDOW(6);
+	dev->stats.tx_carrier_errors += inb(ioaddr + 0);
+	dev->stats.tx_heartbeat_errors += inb(ioaddr + 1);
+	/* Multiple collisions. */ inb(ioaddr + 2);
+	dev->stats.collisions += inb(ioaddr + 3);
+	dev->stats.tx_window_errors += inb(ioaddr + 4);
+	dev->stats.rx_fifo_errors += inb(ioaddr + 5);
+	dev->stats.tx_packets += inb(ioaddr + 6);
+	dev->stats.tx_packets += (inb(ioaddr + 9) & 0x30) << 4;
+						/* Rx packets   */ inb(ioaddr + 7);
+						/* Must read to clear */
+	/* Tx deferrals */ inb(ioaddr + 8);
+	/* Don't bother with register 9, an extension of registers 6&7.
+	   If we do use the 6&7 values the atomic update assumption above
+	   is invalid. */
+	inw(ioaddr + 10);	/* Total Rx and Tx octets. */
+	inw(ioaddr + 12);
+	/* New: On the Vortex we must also clear the BadSSD counter. */
+	EL3WINDOW(4);
+	inb(ioaddr + 12);
+
+	/* We change back to window 7 (not 1) with the Vortex. */
+	EL3WINDOW(7);
+}
+
+/* This new version of set_rx_mode() supports v1.4 kernels.
+   The Vortex chip has no documented multicast filter, so the only
+   multicast setting is to receive all multicast frames.  At least
+   the chip has a very clean way to set the mode, unlike many others. */
+static void set_rx_mode(struct net_device *dev)
+{
+	int ioaddr = dev->base_addr;
+	unsigned short new_mode;
+
+	if (dev->flags & IFF_PROMISC) {
+		if (corkscrew_debug > 3)
+			pr_debug("%s: Setting promiscuous mode.\n",
+			       dev->name);
+		new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm;
+	} else if (!netdev_mc_empty(dev) || dev->flags & IFF_ALLMULTI) {
+		new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast;
+	} else
+		new_mode = SetRxFilter | RxStation | RxBroadcast;
+
+	outw(new_mode, ioaddr + EL3_CMD);
+}
+
+static void netdev_get_drvinfo(struct net_device *dev,
+			       struct ethtool_drvinfo *info)
+{
+	strscpy(info->driver, DRV_NAME, sizeof(info->driver));
+	snprintf(info->bus_info, sizeof(info->bus_info), "ISA 0x%lx",
+		 dev->base_addr);
+}
+
+static u32 netdev_get_msglevel(struct net_device *dev)
+{
+	return corkscrew_debug;
+}
+
+static void netdev_set_msglevel(struct net_device *dev, u32 level)
+{
+	corkscrew_debug = level;
+}
+
+static const struct ethtool_ops netdev_ethtool_ops = {
+	.get_drvinfo		= netdev_get_drvinfo,
+	.get_msglevel		= netdev_get_msglevel,
+	.set_msglevel		= netdev_set_msglevel,
+};
+
+
+#ifdef MODULE
+void cleanup_module(void)
+{
+	while (!list_empty(&root_corkscrew_dev)) {
+		struct net_device *dev;
+		struct corkscrew_private *vp;
+
+		vp = list_entry(root_corkscrew_dev.next,
+				struct corkscrew_private, list);
+		dev = vp->our_dev;
+		unregister_netdev(dev);
+		cleanup_card(dev);
+		free_netdev(dev);
+	}
+}
+#endif				/* MODULE */
diff --git a/drivers/net/ethernet/3com/3c574_cs.c b/drivers/net/ethernet/3com/3c574_cs.c
new file mode 100644
index 000000000..dc3b7c960
--- /dev/null
+++ b/drivers/net/ethernet/3com/3c574_cs.c
@@ -0,0 +1,1164 @@
+/* 3c574.c: A PCMCIA ethernet driver for the 3com 3c574 "RoadRunner".
+
+	Written 1993-1998 by
+	Donald Becker, becker@scyld.com, (driver core) and
+	David Hinds, dahinds@users.sourceforge.net (from his PC card code).
+	Locking fixes (C) Copyright 2003 Red Hat Inc
+
+	This software may be used and distributed according to the terms of
+	the GNU General Public License, incorporated herein by reference.
+
+	This driver derives from Donald Becker's 3c509 core, which has the
+	following copyright:
+	Copyright 1993 United States Government as represented by the
+	Director, National Security Agency.
+	
+
+*/
+
+/*
+				Theory of Operation
+
+I. Board Compatibility
+
+This device driver is designed for the 3Com 3c574 PC card Fast Ethernet
+Adapter.
+
+II. Board-specific settings
+
+None -- PC cards are autoconfigured.
+
+III. Driver operation
+
+The 3c574 uses a Boomerang-style interface, without the bus-master capability.
+See the Boomerang driver and documentation for most details.
+
+IV. Notes and chip documentation.
+
+Two added registers are used to enhance PIO performance, RunnerRdCtrl and
+RunnerWrCtrl.  These are 11 bit down-counters that are preloaded with the
+count of word (16 bits) reads or writes the driver is about to do to the Rx
+or Tx FIFO.  The chip is then able to hide the internal-PCI-bus to PC-card
+translation latency by buffering the I/O operations with an 8 word FIFO.
+Note: No other chip accesses are permitted when this buffer is used.
+
+A second enhancement is that both attribute and common memory space
+0x0800-0x0fff can translated to the PIO FIFO.  Thus memory operations (faster
+with *some* PCcard bridges) may be used instead of I/O operations.
+This is enabled by setting the 0x10 bit in the PCMCIA LAN COR.
+
+Some slow PC card bridges work better if they never see a WAIT signal.
+This is configured by setting the 0x20 bit in the PCMCIA LAN COR.
+Only do this after testing that it is reliable and improves performance.
+
+The upper five bits of RunnerRdCtrl are used to window into PCcard
+configuration space registers.  Window 0 is the regular Boomerang/Odie
+register set, 1-5 are various PC card control registers, and 16-31 are
+the (reversed!) CIS table.
+
+A final note: writing the InternalConfig register in window 3 with an
+invalid ramWidth is Very Bad.
+
+V. References
+
+http://www.scyld.com/expert/NWay.html
+http://www.national.com/opf/DP/DP83840A.html
+
+Thanks to Terry Murphy of 3Com for providing development information for
+earlier 3Com products.
+
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/bitops.h>
+#include <linux/mii.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ciscode.h>
+#include <pcmcia/ds.h>
+
+#include <linux/uaccess.h>
+#include <asm/io.h>
+
+/*====================================================================*/
+
+/* Module parameters */
+
+MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
+MODULE_DESCRIPTION("3Com 3c574 series PCMCIA ethernet driver");
+MODULE_LICENSE("GPL");
+
+#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
+
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+INT_MODULE_PARM(max_interrupt_work, 32);
+
+/* Force full duplex modes? */
+INT_MODULE_PARM(full_duplex, 0);
+
+/* Autodetect link polarity reversal? */
+INT_MODULE_PARM(auto_polarity, 1);
+
+
+/*====================================================================*/
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT  ((800*HZ)/1000)
+
+/* To minimize the size of the driver source and make the driver more
+   readable not all constants are symbolically defined.
+   You'll need the manual if you want to understand driver details anyway. */
+/* Offsets from base I/O address. */
+#define EL3_DATA	0x00
+#define EL3_CMD		0x0e
+#define EL3_STATUS	0x0e
+
+#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
+
+/* The top five bits written to EL3_CMD are a command, the lower
+   11 bits are the parameter, if applicable. */
+enum el3_cmds {
+	TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11,
+	RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, RxDiscard = 8<<11,
+	TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11,
+	FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11,
+	SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11,
+	SetTxThreshold = 18<<11, SetTxStart = 19<<11, StatsEnable = 21<<11,
+	StatsDisable = 22<<11, StopCoax = 23<<11,
+};
+
+enum elxl_status {
+	IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004,
+	TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
+	IntReq = 0x0040, StatsFull = 0x0080, CmdBusy = 0x1000 };
+
+/* The SetRxFilter command accepts the following classes: */
+enum RxFilter {
+	RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8
+};
+
+enum Window0 {
+	Wn0EepromCmd = 10, Wn0EepromData = 12, /* EEPROM command/address, data. */
+	IntrStatus=0x0E,		/* Valid in all windows. */
+};
+/* These assumes the larger EEPROM. */
+enum Win0_EEPROM_cmds {
+	EEPROM_Read = 0x200, EEPROM_WRITE = 0x100, EEPROM_ERASE = 0x300,
+	EEPROM_EWENB = 0x30,		/* Enable erasing/writing for 10 msec. */
+	EEPROM_EWDIS = 0x00,		/* Disable EWENB before 10 msec timeout. */
+};
+
+/* Register window 1 offsets, the window used in normal operation.
+   On the "Odie" this window is always mapped at offsets 0x10-0x1f.
+   Except for TxFree, which is overlapped by RunnerWrCtrl. */
+enum Window1 {
+	TX_FIFO = 0x10,  RX_FIFO = 0x10,  RxErrors = 0x14,
+	RxStatus = 0x18,  Timer=0x1A, TxStatus = 0x1B,
+	TxFree = 0x0C, /* Remaining free bytes in Tx buffer. */
+	RunnerRdCtrl = 0x16, RunnerWrCtrl = 0x1c,
+};
+
+enum Window3 {			/* Window 3: MAC/config bits. */
+	Wn3_Config=0, Wn3_MAC_Ctrl=6, Wn3_Options=8,
+};
+enum wn3_config {
+	Ram_size = 7,
+	Ram_width = 8,
+	Ram_speed = 0x30,
+	Rom_size = 0xc0,
+	Ram_split_shift = 16,
+	Ram_split = 3 << Ram_split_shift,
+	Xcvr_shift = 20,
+	Xcvr = 7 << Xcvr_shift,
+	Autoselect = 0x1000000,
+};
+
+enum Window4 {		/* Window 4: Xcvr/media bits. */
+	Wn4_FIFODiag = 4, Wn4_NetDiag = 6, Wn4_PhysicalMgmt=8, Wn4_Media = 10,
+};
+
+#define MEDIA_TP	0x00C0	/* Enable link beat and jabber for 10baseT. */
+
+struct el3_private {
+	struct pcmcia_device	*p_dev;
+	u16 advertising, partner;		/* NWay media advertisement */
+	unsigned char phys;			/* MII device address */
+	unsigned int autoselect:1, default_media:3;	/* Read from the EEPROM/Wn3_Config. */
+	/* for transceiver monitoring */
+	struct timer_list media;
+	unsigned short media_status;
+	unsigned short fast_poll;
+	unsigned long last_irq;
+	spinlock_t window_lock;			/* Guards the Window selection */
+};
+
+/* Set iff a MII transceiver on any interface requires mdio preamble.
+   This only set with the original DP83840 on older 3c905 boards, so the extra
+   code size of a per-interface flag is not worthwhile. */
+static char mii_preamble_required = 0;
+
+/* Index of functions. */
+
+static int tc574_config(struct pcmcia_device *link);
+static void tc574_release(struct pcmcia_device *link);
+
+static void mdio_sync(unsigned int ioaddr, int bits);
+static int mdio_read(unsigned int ioaddr, int phy_id, int location);
+static void mdio_write(unsigned int ioaddr, int phy_id, int location,
+		       int value);
+static unsigned short read_eeprom(unsigned int ioaddr, int index);
+static void tc574_wait_for_completion(struct net_device *dev, int cmd);
+
+static void tc574_reset(struct net_device *dev);
+static void media_check(struct timer_list *t);
+static int el3_open(struct net_device *dev);
+static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
+					struct net_device *dev);
+static irqreturn_t el3_interrupt(int irq, void *dev_id);
+static void update_stats(struct net_device *dev);
+static struct net_device_stats *el3_get_stats(struct net_device *dev);
+static int el3_rx(struct net_device *dev, int worklimit);
+static int el3_close(struct net_device *dev);
+static void el3_tx_timeout(struct net_device *dev, unsigned int txqueue);
+static int el3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static void set_rx_mode(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+
+static void tc574_detach(struct pcmcia_device *p_dev);
+
+/*
+	tc574_attach() creates an "instance" of the driver, allocating
+	local data structures for one device.  The device is registered
+	with Card Services.
+*/
+static const struct net_device_ops el3_netdev_ops = {
+	.ndo_open 		= el3_open,
+	.ndo_stop 		= el3_close,
+	.ndo_start_xmit		= el3_start_xmit,
+	.ndo_tx_timeout 	= el3_tx_timeout,
+	.ndo_get_stats		= el3_get_stats,
+	.ndo_eth_ioctl		= el3_ioctl,
+	.ndo_set_rx_mode	= set_multicast_list,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+static int tc574_probe(struct pcmcia_device *link)
+{
+	struct el3_private *lp;
+	struct net_device *dev;
+
+	dev_dbg(&link->dev, "3c574_attach()\n");
+
+	/* Create the PC card device object. */
+	dev = alloc_etherdev(sizeof(struct el3_private));
+	if (!dev)
+		return -ENOMEM;
+	lp = netdev_priv(dev);
+	link->priv = dev;
+	lp->p_dev = link;
+
+	spin_lock_init(&lp->window_lock);
+	link->resource[0]->end = 32;
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
+	link->config_flags |= CONF_ENABLE_IRQ;
+	link->config_index = 1;
+
+	dev->netdev_ops = &el3_netdev_ops;
+	dev->watchdog_timeo = TX_TIMEOUT;
+
+	return tc574_config(link);
+}
+
+static void tc574_detach(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+
+	dev_dbg(&link->dev, "3c574_detach()\n");
+
+	unregister_netdev(dev);
+
+	tc574_release(link);
+
+	free_netdev(dev);
+} /* tc574_detach */
+
+static const char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
+
+static int tc574_config(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+	struct el3_private *lp = netdev_priv(dev);
+	int ret, i, j;
+	__be16 addr[ETH_ALEN / 2];
+	unsigned int ioaddr;
+	char *cardname;
+	__u32 config;
+	u8 *buf;
+	size_t len;
+
+	dev_dbg(&link->dev, "3c574_config()\n");
+
+	link->io_lines = 16;
+
+	for (i = j = 0; j < 0x400; j += 0x20) {
+		link->resource[0]->start = j ^ 0x300;
+		i = pcmcia_request_io(link);
+		if (i == 0)
+			break;
+	}
+	if (i != 0)
+		goto failed;
+
+	ret = pcmcia_request_irq(link, el3_interrupt);
+	if (ret)
+		goto failed;
+
+	ret = pcmcia_enable_device(link);
+	if (ret)
+		goto failed;
+
+	dev->irq = link->irq;
+	dev->base_addr = link->resource[0]->start;
+
+	ioaddr = dev->base_addr;
+
+	/* The 3c574 normally uses an EEPROM for configuration info, including
+	   the hardware address.  The future products may include a modem chip
+	   and put the address in the CIS. */
+
+	len = pcmcia_get_tuple(link, 0x88, &buf);
+	if (buf && len >= 6) {
+		for (i = 0; i < 3; i++)
+			addr[i] = htons(le16_to_cpu(buf[i * 2]));
+		kfree(buf);
+	} else {
+		kfree(buf); /* 0 < len < 6 */
+		EL3WINDOW(0);
+		for (i = 0; i < 3; i++)
+			addr[i] = htons(read_eeprom(ioaddr, i + 10));
+		if (addr[0] == htons(0x6060)) {
+			pr_notice("IO port conflict at 0x%03lx-0x%03lx\n",
+				  dev->base_addr, dev->base_addr+15);
+			goto failed;
+		}
+	}
+	eth_hw_addr_set(dev, (u8 *)addr);
+	if (link->prod_id[1])
+		cardname = link->prod_id[1];
+	else
+		cardname = "3Com 3c574";
+
+	{
+		u_char mcr;
+		outw(2<<11, ioaddr + RunnerRdCtrl);
+		mcr = inb(ioaddr + 2);
+		outw(0<<11, ioaddr + RunnerRdCtrl);
+		pr_info("  ASIC rev %d,", mcr>>3);
+		EL3WINDOW(3);
+		config = inl(ioaddr + Wn3_Config);
+		lp->default_media = (config & Xcvr) >> Xcvr_shift;
+		lp->autoselect = config & Autoselect ? 1 : 0;
+	}
+
+	timer_setup(&lp->media, media_check, 0);
+
+	{
+		int phy;
+		
+		/* Roadrunner only: Turn on the MII transceiver */
+		outw(0x8040, ioaddr + Wn3_Options);
+		mdelay(1);
+		outw(0xc040, ioaddr + Wn3_Options);
+		tc574_wait_for_completion(dev, TxReset);
+		tc574_wait_for_completion(dev, RxReset);
+		mdelay(1);
+		outw(0x8040, ioaddr + Wn3_Options);
+		
+		EL3WINDOW(4);
+		for (phy = 1; phy <= 32; phy++) {
+			int mii_status;
+			mdio_sync(ioaddr, 32);
+			mii_status = mdio_read(ioaddr, phy & 0x1f, 1);
+			if (mii_status != 0xffff) {
+				lp->phys = phy & 0x1f;
+				dev_dbg(&link->dev, "  MII transceiver at "
+					"index %d, status %x.\n",
+					  phy, mii_status);
+				if ((mii_status & 0x0040) == 0)
+					mii_preamble_required = 1;
+				break;
+			}
+		}
+		if (phy > 32) {
+			pr_notice("  No MII transceivers found!\n");
+			goto failed;
+		}
+		i = mdio_read(ioaddr, lp->phys, 16) | 0x40;
+		mdio_write(ioaddr, lp->phys, 16, i);
+		lp->advertising = mdio_read(ioaddr, lp->phys, 4);
+		if (full_duplex) {
+			/* Only advertise the FD media types. */
+			lp->advertising &= ~0x02a0;
+			mdio_write(ioaddr, lp->phys, 4, lp->advertising);
+		}
+	}
+
+	SET_NETDEV_DEV(dev, &link->dev);
+
+	if (register_netdev(dev) != 0) {
+		pr_notice("register_netdev() failed\n");
+		goto failed;
+	}
+
+	netdev_info(dev, "%s at io %#3lx, irq %d, hw_addr %pM\n",
+		    cardname, dev->base_addr, dev->irq, dev->dev_addr);
+	netdev_info(dev, " %dK FIFO split %s Rx:Tx, %sMII interface.\n",
+		    8 << (config & Ram_size),
+		    ram_split[(config & Ram_split) >> Ram_split_shift],
+		    config & Autoselect ? "autoselect " : "");
+
+	return 0;
+
+failed:
+	tc574_release(link);
+	return -ENODEV;
+
+} /* tc574_config */
+
+static void tc574_release(struct pcmcia_device *link)
+{
+	pcmcia_disable_device(link);
+}
+
+static int tc574_suspend(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+
+	if (link->open)
+		netif_device_detach(dev);
+
+	return 0;
+}
+
+static int tc574_resume(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+
+	if (link->open) {
+		tc574_reset(dev);
+		netif_device_attach(dev);
+	}
+
+	return 0;
+}
+
+static void dump_status(struct net_device *dev)
+{
+	unsigned int ioaddr = dev->base_addr;
+	EL3WINDOW(1);
+	netdev_info(dev, "  irq status %04x, rx status %04x, tx status %02x, tx free %04x\n",
+		    inw(ioaddr+EL3_STATUS),
+		    inw(ioaddr+RxStatus), inb(ioaddr+TxStatus),
+		    inw(ioaddr+TxFree));
+	EL3WINDOW(4);
+	netdev_info(dev, "  diagnostics: fifo %04x net %04x ethernet %04x media %04x\n",
+		    inw(ioaddr+0x04), inw(ioaddr+0x06),
+		    inw(ioaddr+0x08), inw(ioaddr+0x0a));
+	EL3WINDOW(1);
+}
+
+/*
+  Use this for commands that may take time to finish
+*/
+static void tc574_wait_for_completion(struct net_device *dev, int cmd)
+{
+	int i = 1500;
+	outw(cmd, dev->base_addr + EL3_CMD);
+	while (--i > 0)
+		if (!(inw(dev->base_addr + EL3_STATUS) & 0x1000)) break;
+	if (i == 0)
+		netdev_notice(dev, "command 0x%04x did not complete!\n", cmd);
+}
+
+/* Read a word from the EEPROM using the regular EEPROM access register.
+   Assume that we are in register window zero.
+ */
+static unsigned short read_eeprom(unsigned int ioaddr, int index)
+{
+	int timer;
+	outw(EEPROM_Read + index, ioaddr + Wn0EepromCmd);
+	/* Pause for at least 162 usec for the read to take place. */
+	for (timer = 1620; timer >= 0; timer--) {
+		if ((inw(ioaddr + Wn0EepromCmd) & 0x8000) == 0)
+			break;
+	}
+	return inw(ioaddr + Wn0EepromData);
+}
+
+/* MII transceiver control section.
+   Read and write the MII registers using software-generated serial
+   MDIO protocol.  See the MII specifications or DP83840A data sheet
+   for details.
+   The maxium data clock rate is 2.5 Mhz.  The timing is easily met by the
+   slow PC card interface. */
+
+#define MDIO_SHIFT_CLK	0x01
+#define MDIO_DIR_WRITE	0x04
+#define MDIO_DATA_WRITE0 (0x00 | MDIO_DIR_WRITE)
+#define MDIO_DATA_WRITE1 (0x02 | MDIO_DIR_WRITE)
+#define MDIO_DATA_READ	0x02
+#define MDIO_ENB_IN		0x00
+
+/* Generate the preamble required for initial synchronization and
+   a few older transceivers. */
+static void mdio_sync(unsigned int ioaddr, int bits)
+{
+	unsigned int mdio_addr = ioaddr + Wn4_PhysicalMgmt;
+
+	/* Establish sync by sending at least 32 logic ones. */
+	while (-- bits >= 0) {
+		outw(MDIO_DATA_WRITE1, mdio_addr);
+		outw(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr);
+	}
+}
+
+static int mdio_read(unsigned int ioaddr, int phy_id, int location)
+{
+	int i;
+	int read_cmd = (0xf6 << 10) | (phy_id << 5) | location;
+	unsigned int retval = 0;
+	unsigned int mdio_addr = ioaddr + Wn4_PhysicalMgmt;
+
+	if (mii_preamble_required)
+		mdio_sync(ioaddr, 32);
+
+	/* Shift the read command bits out. */
+	for (i = 14; i >= 0; i--) {
+		int dataval = (read_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
+		outw(dataval, mdio_addr);
+		outw(dataval | MDIO_SHIFT_CLK, mdio_addr);
+	}
+	/* Read the two transition, 16 data, and wire-idle bits. */
+	for (i = 19; i > 0; i--) {
+		outw(MDIO_ENB_IN, mdio_addr);
+		retval = (retval << 1) | ((inw(mdio_addr) & MDIO_DATA_READ) ? 1 : 0);
+		outw(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
+	}
+	return (retval>>1) & 0xffff;
+}
+
+static void mdio_write(unsigned int ioaddr, int phy_id, int location, int value)
+{
+	int write_cmd = 0x50020000 | (phy_id << 23) | (location << 18) | value;
+	unsigned int mdio_addr = ioaddr + Wn4_PhysicalMgmt;
+	int i;
+
+	if (mii_preamble_required)
+		mdio_sync(ioaddr, 32);
+
+	/* Shift the command bits out. */
+	for (i = 31; i >= 0; i--) {
+		int dataval = (write_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
+		outw(dataval, mdio_addr);
+		outw(dataval | MDIO_SHIFT_CLK, mdio_addr);
+	}
+	/* Leave the interface idle. */
+	for (i = 1; i >= 0; i--) {
+		outw(MDIO_ENB_IN, mdio_addr);
+		outw(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
+	}
+}
+
+/* Reset and restore all of the 3c574 registers. */
+static void tc574_reset(struct net_device *dev)
+{
+	struct el3_private *lp = netdev_priv(dev);
+	int i;
+	unsigned int ioaddr = dev->base_addr;
+	unsigned long flags;
+
+	tc574_wait_for_completion(dev, TotalReset|0x10);
+
+	spin_lock_irqsave(&lp->window_lock, flags);
+	/* Clear any transactions in progress. */
+	outw(0, ioaddr + RunnerWrCtrl);
+	outw(0, ioaddr + RunnerRdCtrl);
+
+	/* Set the station address and mask. */
+	EL3WINDOW(2);
+	for (i = 0; i < 6; i++)
+		outb(dev->dev_addr[i], ioaddr + i);
+	for (; i < 12; i+=2)
+		outw(0, ioaddr + i);
+
+	/* Reset config options */
+	EL3WINDOW(3);
+	outb((dev->mtu > 1500 ? 0x40 : 0), ioaddr + Wn3_MAC_Ctrl);
+	outl((lp->autoselect ? 0x01000000 : 0) | 0x0062001b,
+		 ioaddr + Wn3_Config);
+	/* Roadrunner only: Turn on the MII transceiver. */
+	outw(0x8040, ioaddr + Wn3_Options);
+	mdelay(1);
+	outw(0xc040, ioaddr + Wn3_Options);
+	EL3WINDOW(1);
+	spin_unlock_irqrestore(&lp->window_lock, flags);
+	
+	tc574_wait_for_completion(dev, TxReset);
+	tc574_wait_for_completion(dev, RxReset);
+	mdelay(1);
+	spin_lock_irqsave(&lp->window_lock, flags);
+	EL3WINDOW(3);
+	outw(0x8040, ioaddr + Wn3_Options);
+
+	/* Switch to the stats window, and clear all stats by reading. */
+	outw(StatsDisable, ioaddr + EL3_CMD);
+	EL3WINDOW(6);
+	for (i = 0; i < 10; i++)
+		inb(ioaddr + i);
+	inw(ioaddr + 10);
+	inw(ioaddr + 12);
+	EL3WINDOW(4);
+	inb(ioaddr + 12);
+	inb(ioaddr + 13);
+
+	/* .. enable any extra statistics bits.. */
+	outw(0x0040, ioaddr + Wn4_NetDiag);
+	
+	EL3WINDOW(1);
+	spin_unlock_irqrestore(&lp->window_lock, flags);
+	
+	/* .. re-sync MII and re-fill what NWay is advertising. */
+	mdio_sync(ioaddr, 32);
+	mdio_write(ioaddr, lp->phys, 4, lp->advertising);
+	if (!auto_polarity) {
+		/* works for TDK 78Q2120 series MII's */
+		i = mdio_read(ioaddr, lp->phys, 16) | 0x20;
+		mdio_write(ioaddr, lp->phys, 16, i);
+	}
+
+	spin_lock_irqsave(&lp->window_lock, flags);
+	/* Switch to register set 1 for normal use, just for TxFree. */
+	set_rx_mode(dev);
+	spin_unlock_irqrestore(&lp->window_lock, flags);
+	outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
+	outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
+	outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
+	/* Allow status bits to be seen. */
+	outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD);
+	/* Ack all pending events, and set active indicator mask. */
+	outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
+		 ioaddr + EL3_CMD);
+	outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull
+		 | AdapterFailure | RxEarly, ioaddr + EL3_CMD);
+}
+
+static int el3_open(struct net_device *dev)
+{
+	struct el3_private *lp = netdev_priv(dev);
+	struct pcmcia_device *link = lp->p_dev;
+
+	if (!pcmcia_dev_present(link))
+		return -ENODEV;
+	
+	link->open++;
+	netif_start_queue(dev);
+	
+	tc574_reset(dev);
+	lp->media.expires = jiffies + HZ;
+	add_timer(&lp->media);
+	
+	dev_dbg(&link->dev, "%s: opened, status %4.4x.\n",
+		  dev->name, inw(dev->base_addr + EL3_STATUS));
+	
+	return 0;
+}
+
+static void el3_tx_timeout(struct net_device *dev, unsigned int txqueue)
+{
+	unsigned int ioaddr = dev->base_addr;
+	
+	netdev_notice(dev, "Transmit timed out!\n");
+	dump_status(dev);
+	dev->stats.tx_errors++;
+	netif_trans_update(dev); /* prevent tx timeout */
+	/* Issue TX_RESET and TX_START commands. */
+	tc574_wait_for_completion(dev, TxReset);
+	outw(TxEnable, ioaddr + EL3_CMD);
+	netif_wake_queue(dev);
+}
+
+static void pop_tx_status(struct net_device *dev)
+{
+	unsigned int ioaddr = dev->base_addr;
+	int i;
+    
+	/* Clear the Tx status stack. */
+	for (i = 32; i > 0; i--) {
+		u_char tx_status = inb(ioaddr + TxStatus);
+		if (!(tx_status & 0x84))
+			break;
+		/* reset transmitter on jabber error or underrun */
+		if (tx_status & 0x30)
+			tc574_wait_for_completion(dev, TxReset);
+		if (tx_status & 0x38) {
+			pr_debug("%s: transmit error: status 0x%02x\n",
+				  dev->name, tx_status);
+			outw(TxEnable, ioaddr + EL3_CMD);
+			dev->stats.tx_aborted_errors++;
+		}
+		outb(0x00, ioaddr + TxStatus); /* Pop the status stack. */
+	}
+}
+
+static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
+					struct net_device *dev)
+{
+	unsigned int ioaddr = dev->base_addr;
+	struct el3_private *lp = netdev_priv(dev);
+	unsigned long flags;
+
+	pr_debug("%s: el3_start_xmit(length = %ld) called, "
+		  "status %4.4x.\n", dev->name, (long)skb->len,
+		  inw(ioaddr + EL3_STATUS));
+
+	spin_lock_irqsave(&lp->window_lock, flags);
+
+	dev->stats.tx_bytes += skb->len;
+
+	/* Put out the doubleword header... */
+	outw(skb->len, ioaddr + TX_FIFO);
+	outw(0, ioaddr + TX_FIFO);
+	/* ... and the packet rounded to a doubleword. */
+	outsl(ioaddr + TX_FIFO, skb->data, (skb->len+3)>>2);
+
+	/* TxFree appears only in Window 1, not offset 0x1c. */
+	if (inw(ioaddr + TxFree) <= 1536) {
+		netif_stop_queue(dev);
+		/* Interrupt us when the FIFO has room for max-sized packet. 
+		   The threshold is in units of dwords. */
+		outw(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD);
+	}
+
+	pop_tx_status(dev);
+	spin_unlock_irqrestore(&lp->window_lock, flags);
+	dev_kfree_skb(skb);
+	return NETDEV_TX_OK;
+}
+
+/* The EL3 interrupt handler. */
+static irqreturn_t el3_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = (struct net_device *) dev_id;
+	struct el3_private *lp = netdev_priv(dev);
+	unsigned int ioaddr;
+	unsigned status;
+	int work_budget = max_interrupt_work;
+	int handled = 0;
+
+	if (!netif_device_present(dev))
+		return IRQ_NONE;
+	ioaddr = dev->base_addr;
+
+	pr_debug("%s: interrupt, status %4.4x.\n",
+		  dev->name, inw(ioaddr + EL3_STATUS));
+
+	spin_lock(&lp->window_lock);
+	
+	while ((status = inw(ioaddr + EL3_STATUS)) &
+		   (IntLatch | RxComplete | RxEarly | StatsFull)) {
+		if (!netif_device_present(dev) ||
+			((status & 0xe000) != 0x2000)) {
+			pr_debug("%s: Interrupt from dead card\n", dev->name);
+			break;
+		}
+
+		handled = 1;
+
+		if (status & RxComplete)
+			work_budget = el3_rx(dev, work_budget);
+
+		if (status & TxAvailable) {
+			pr_debug("  TX room bit was handled.\n");
+			/* There's room in the FIFO for a full-sized packet. */
+			outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
+			netif_wake_queue(dev);
+		}
+
+		if (status & TxComplete)
+			pop_tx_status(dev);
+
+		if (status & (AdapterFailure | RxEarly | StatsFull)) {
+			/* Handle all uncommon interrupts. */
+			if (status & StatsFull)
+				update_stats(dev);
+			if (status & RxEarly) {
+				work_budget = el3_rx(dev, work_budget);
+				outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
+			}
+			if (status & AdapterFailure) {
+				u16 fifo_diag;
+				EL3WINDOW(4);
+				fifo_diag = inw(ioaddr + Wn4_FIFODiag);
+				EL3WINDOW(1);
+				netdev_notice(dev, "adapter failure, FIFO diagnostic register %04x\n",
+					      fifo_diag);
+				if (fifo_diag & 0x0400) {
+					/* Tx overrun */
+					tc574_wait_for_completion(dev, TxReset);
+					outw(TxEnable, ioaddr + EL3_CMD);
+				}
+				if (fifo_diag & 0x2000) {
+					/* Rx underrun */
+					tc574_wait_for_completion(dev, RxReset);
+					set_rx_mode(dev);
+					outw(RxEnable, ioaddr + EL3_CMD);
+				}
+				outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD);
+			}
+		}
+
+		if (--work_budget < 0) {
+			pr_debug("%s: Too much work in interrupt, "
+				  "status %4.4x.\n", dev->name, status);
+			/* Clear all interrupts */
+			outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
+			break;
+		}
+		/* Acknowledge the IRQ. */
+		outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
+	}
+
+	pr_debug("%s: exiting interrupt, status %4.4x.\n",
+		  dev->name, inw(ioaddr + EL3_STATUS));
+		  
+	spin_unlock(&lp->window_lock);
+	return IRQ_RETVAL(handled);
+}
+
+/*
+    This timer serves two purposes: to check for missed interrupts
+	(and as a last resort, poll the NIC for events), and to monitor
+	the MII, reporting changes in cable status.
+*/
+static void media_check(struct timer_list *t)
+{
+	struct el3_private *lp = from_timer(lp, t, media);
+	struct net_device *dev = lp->p_dev->priv;
+	unsigned int ioaddr = dev->base_addr;
+	unsigned long flags;
+	unsigned short /* cable, */ media, partner;
+
+	if (!netif_device_present(dev))
+		goto reschedule;
+	
+	/* Check for pending interrupt with expired latency timer: with
+	   this, we can limp along even if the interrupt is blocked */
+	if ((inw(ioaddr + EL3_STATUS) & IntLatch) && (inb(ioaddr + Timer) == 0xff)) {
+		if (!lp->fast_poll)
+			netdev_info(dev, "interrupt(s) dropped!\n");
+
+		local_irq_save(flags);
+		el3_interrupt(dev->irq, dev);
+		local_irq_restore(flags);
+
+		lp->fast_poll = HZ;
+	}
+	if (lp->fast_poll) {
+		lp->fast_poll--;
+		lp->media.expires = jiffies + 2*HZ/100;
+		add_timer(&lp->media);
+		return;
+	}
+
+	spin_lock_irqsave(&lp->window_lock, flags);
+	EL3WINDOW(4);
+	media = mdio_read(ioaddr, lp->phys, 1);
+	partner = mdio_read(ioaddr, lp->phys, 5);
+	EL3WINDOW(1);
+	
+	if (media != lp->media_status) {
+		if ((media ^ lp->media_status) & 0x0004)
+			netdev_info(dev, "%s link beat\n",
+				    (lp->media_status & 0x0004) ? "lost" : "found");
+		if ((media ^ lp->media_status) & 0x0020) {
+			lp->partner = 0;
+			if (lp->media_status & 0x0020) {
+				netdev_info(dev, "autonegotiation restarted\n");
+			} else if (partner) {
+				partner &= lp->advertising;
+				lp->partner = partner;
+				netdev_info(dev, "autonegotiation complete: "
+					    "%dbaseT-%cD selected\n",
+					    (partner & 0x0180) ? 100 : 10,
+					    (partner & 0x0140) ? 'F' : 'H');
+			} else {
+				netdev_info(dev, "link partner did not autonegotiate\n");
+			}
+
+			EL3WINDOW(3);
+			outb((partner & 0x0140 ? 0x20 : 0) |
+				 (dev->mtu > 1500 ? 0x40 : 0), ioaddr + Wn3_MAC_Ctrl);
+			EL3WINDOW(1);
+
+		}
+		if (media & 0x0010)
+			netdev_info(dev, "remote fault detected\n");
+		if (media & 0x0002)
+			netdev_info(dev, "jabber detected\n");
+		lp->media_status = media;
+	}
+	spin_unlock_irqrestore(&lp->window_lock, flags);
+
+reschedule:
+	lp->media.expires = jiffies + HZ;
+	add_timer(&lp->media);
+}
+
+static struct net_device_stats *el3_get_stats(struct net_device *dev)
+{
+	struct el3_private *lp = netdev_priv(dev);
+
+	if (netif_device_present(dev)) {
+		unsigned long flags;
+		spin_lock_irqsave(&lp->window_lock, flags);
+		update_stats(dev);
+		spin_unlock_irqrestore(&lp->window_lock, flags);
+	}
+	return &dev->stats;
+}
+
+/*  Update statistics.
+	Surprisingly this need not be run single-threaded, but it effectively is.
+	The counters clear when read, so the adds must merely be atomic.
+ */
+static void update_stats(struct net_device *dev)
+{
+	unsigned int ioaddr = dev->base_addr;
+	u8 up;
+
+	pr_debug("%s: updating the statistics.\n", dev->name);
+
+	if (inw(ioaddr+EL3_STATUS) == 0xffff) /* No card. */
+		return;
+		
+	/* Unlike the 3c509 we need not turn off stats updates while reading. */
+	/* Switch to the stats window, and read everything. */
+	EL3WINDOW(6);
+	dev->stats.tx_carrier_errors 		+= inb(ioaddr + 0);
+	dev->stats.tx_heartbeat_errors		+= inb(ioaddr + 1);
+	/* Multiple collisions. */	   	inb(ioaddr + 2);
+	dev->stats.collisions			+= inb(ioaddr + 3);
+	dev->stats.tx_window_errors		+= inb(ioaddr + 4);
+	dev->stats.rx_fifo_errors		+= inb(ioaddr + 5);
+	dev->stats.tx_packets			+= inb(ioaddr + 6);
+	up		 			 = inb(ioaddr + 9);
+	dev->stats.tx_packets			+= (up&0x30) << 4;
+	/* Rx packets   */			   inb(ioaddr + 7);
+	/* Tx deferrals */			   inb(ioaddr + 8);
+	/* rx */				   inw(ioaddr + 10);
+	/* tx */				   inw(ioaddr + 12);
+
+	EL3WINDOW(4);
+	/* BadSSD */				   inb(ioaddr + 12);
+	up					 = inb(ioaddr + 13);
+
+	EL3WINDOW(1);
+}
+
+static int el3_rx(struct net_device *dev, int worklimit)
+{
+	unsigned int ioaddr = dev->base_addr;
+	short rx_status;
+	
+	pr_debug("%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
+		  dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RxStatus));
+	while (!((rx_status = inw(ioaddr + RxStatus)) & 0x8000) &&
+			worklimit > 0) {
+		worklimit--;
+		if (rx_status & 0x4000) { /* Error, update stats. */
+			short error = rx_status & 0x3800;
+			dev->stats.rx_errors++;
+			switch (error) {
+			case 0x0000:	dev->stats.rx_over_errors++; break;
+			case 0x0800:	dev->stats.rx_length_errors++; break;
+			case 0x1000:	dev->stats.rx_frame_errors++; break;
+			case 0x1800:	dev->stats.rx_length_errors++; break;
+			case 0x2000:	dev->stats.rx_frame_errors++; break;
+			case 0x2800:	dev->stats.rx_crc_errors++; break;
+			}
+		} else {
+			short pkt_len = rx_status & 0x7ff;
+			struct sk_buff *skb;
+
+			skb = netdev_alloc_skb(dev, pkt_len + 5);
+
+			pr_debug("  Receiving packet size %d status %4.4x.\n",
+				  pkt_len, rx_status);
+			if (skb != NULL) {
+				skb_reserve(skb, 2);
+				insl(ioaddr+RX_FIFO, skb_put(skb, pkt_len),
+						((pkt_len+3)>>2));
+				skb->protocol = eth_type_trans(skb, dev);
+				netif_rx(skb);
+				dev->stats.rx_packets++;
+				dev->stats.rx_bytes += pkt_len;
+			} else {
+				pr_debug("%s: couldn't allocate a sk_buff of"
+					  " size %d.\n", dev->name, pkt_len);
+				dev->stats.rx_dropped++;
+			}
+		}
+		tc574_wait_for_completion(dev, RxDiscard);
+	}
+
+	return worklimit;
+}
+
+/* Provide ioctl() calls to examine the MII xcvr state. */
+static int el3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct el3_private *lp = netdev_priv(dev);
+	unsigned int ioaddr = dev->base_addr;
+	struct mii_ioctl_data *data = if_mii(rq);
+	int phy = lp->phys & 0x1f;
+
+	pr_debug("%s: In ioct(%-.6s, %#4.4x) %4.4x %4.4x %4.4x %4.4x.\n",
+		  dev->name, rq->ifr_ifrn.ifrn_name, cmd,
+		  data->phy_id, data->reg_num, data->val_in, data->val_out);
+
+	switch(cmd) {
+	case SIOCGMIIPHY:		/* Get the address of the PHY in use. */
+		data->phy_id = phy;
+		fallthrough;
+	case SIOCGMIIREG:		/* Read the specified MII register. */
+		{
+			int saved_window;
+			unsigned long flags;
+
+			spin_lock_irqsave(&lp->window_lock, flags);
+			saved_window = inw(ioaddr + EL3_CMD) >> 13;
+			EL3WINDOW(4);
+			data->val_out = mdio_read(ioaddr, data->phy_id & 0x1f,
+						  data->reg_num & 0x1f);
+			EL3WINDOW(saved_window);
+			spin_unlock_irqrestore(&lp->window_lock, flags);
+			return 0;
+		}
+	case SIOCSMIIREG:		/* Write the specified MII register */
+		{
+			int saved_window;
+                       unsigned long flags;
+
+			spin_lock_irqsave(&lp->window_lock, flags);
+			saved_window = inw(ioaddr + EL3_CMD) >> 13;
+			EL3WINDOW(4);
+			mdio_write(ioaddr, data->phy_id & 0x1f,
+				   data->reg_num & 0x1f, data->val_in);
+			EL3WINDOW(saved_window);
+			spin_unlock_irqrestore(&lp->window_lock, flags);
+			return 0;
+		}
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+/* The Odie chip has a 64 bin multicast filter, but the bit layout is not
+   documented.  Until it is we revert to receiving all multicast frames when
+   any multicast reception is desired.
+   Note: My other drivers emit a log message whenever promiscuous mode is
+   entered to help detect password sniffers.  This is less desirable on
+   typical PC card machines, so we omit the message.
+   */
+
+static void set_rx_mode(struct net_device *dev)
+{
+	unsigned int ioaddr = dev->base_addr;
+
+	if (dev->flags & IFF_PROMISC)
+		outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm,
+			 ioaddr + EL3_CMD);
+	else if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI))
+		outw(SetRxFilter|RxStation|RxMulticast|RxBroadcast, ioaddr + EL3_CMD);
+	else
+		outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD);
+}
+
+static void set_multicast_list(struct net_device *dev)
+{
+	struct el3_private *lp = netdev_priv(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&lp->window_lock, flags);
+	set_rx_mode(dev);
+	spin_unlock_irqrestore(&lp->window_lock, flags);
+}
+
+static int el3_close(struct net_device *dev)
+{
+	unsigned int ioaddr = dev->base_addr;
+	struct el3_private *lp = netdev_priv(dev);
+	struct pcmcia_device *link = lp->p_dev;
+
+	dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name);
+	
+	if (pcmcia_dev_present(link)) {
+		unsigned long flags;
+
+		/* Turn off statistics ASAP.  We update lp->stats below. */
+		outw(StatsDisable, ioaddr + EL3_CMD);
+		
+		/* Disable the receiver and transmitter. */
+		outw(RxDisable, ioaddr + EL3_CMD);
+		outw(TxDisable, ioaddr + EL3_CMD);
+		
+		/* Note: Switching to window 0 may disable the IRQ. */
+		EL3WINDOW(0);
+		spin_lock_irqsave(&lp->window_lock, flags);
+		update_stats(dev);
+		spin_unlock_irqrestore(&lp->window_lock, flags);
+
+		/* force interrupts off */
+		outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
+	}
+
+	link->open--;
+	netif_stop_queue(dev);
+	del_timer_sync(&lp->media);
+
+	return 0;
+}
+
+static const struct pcmcia_device_id tc574_ids[] = {
+	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0574),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
+	PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, tc574_ids);
+
+static struct pcmcia_driver tc574_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "3c574_cs",
+	.probe		= tc574_probe,
+	.remove		= tc574_detach,
+	.id_table       = tc574_ids,
+	.suspend	= tc574_suspend,
+	.resume		= tc574_resume,
+};
+module_pcmcia_driver(tc574_driver);
diff --git a/drivers/net/ethernet/3com/3c589_cs.c b/drivers/net/ethernet/3com/3c589_cs.c
new file mode 100644
index 000000000..5267e9dcd
--- /dev/null
+++ b/drivers/net/ethernet/3com/3c589_cs.c
@@ -0,0 +1,974 @@
+/* ======================================================================
+ *
+ * A PCMCIA ethernet driver for the 3com 3c589 card.
+ *
+ * Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net
+ *
+ * 3c589_cs.c 1.162 2001/10/13 00:08:50
+ *
+ * The network driver code is based on Donald Becker's 3c589 code:
+ *
+ * Written 1994 by Donald Becker.
+ * Copyright 1993 United States Government as represented by the
+ * Director, National Security Agency.  This software may be used and
+ * distributed according to the terms of the GNU General Public License,
+ * incorporated herein by reference.
+ * Donald Becker may be reached at becker@scyld.com
+ *
+ * Updated for 2.5.x by Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ * ======================================================================
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define DRV_NAME	"3c589_cs"
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/bitops.h>
+#include <linux/jiffies.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ciscode.h>
+#include <pcmcia/ds.h>
+
+
+/* To minimize the size of the driver source I only define operating
+ * constants if they are used several times. You'll need the manual
+ * if you want to understand driver details.
+ */
+
+/* Offsets from base I/O address. */
+#define EL3_DATA	0x00
+#define EL3_TIMER	0x0a
+#define EL3_CMD		0x0e
+#define EL3_STATUS	0x0e
+
+#define EEPROM_READ	0x0080
+#define EEPROM_BUSY	0x8000
+
+#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
+
+/* The top five bits written to EL3_CMD are a command, the lower
+ * 11 bits are the parameter, if applicable.
+ */
+
+enum c509cmd {
+	TotalReset	= 0<<11,
+	SelectWindow	= 1<<11,
+	StartCoax	= 2<<11,
+	RxDisable	= 3<<11,
+	RxEnable	= 4<<11,
+	RxReset		= 5<<11,
+	RxDiscard	= 8<<11,
+	TxEnable	= 9<<11,
+	TxDisable	= 10<<11,
+	TxReset		= 11<<11,
+	FakeIntr	= 12<<11,
+	AckIntr		= 13<<11,
+	SetIntrEnb	= 14<<11,
+	SetStatusEnb	= 15<<11,
+	SetRxFilter	= 16<<11,
+	SetRxThreshold	= 17<<11,
+	SetTxThreshold	= 18<<11,
+	SetTxStart	= 19<<11,
+	StatsEnable	= 21<<11,
+	StatsDisable	= 22<<11,
+	StopCoax	= 23<<11
+};
+
+enum c509status {
+	IntLatch	= 0x0001,
+	AdapterFailure	= 0x0002,
+	TxComplete	= 0x0004,
+	TxAvailable	= 0x0008,
+	RxComplete	= 0x0010,
+	RxEarly		= 0x0020,
+	IntReq		= 0x0040,
+	StatsFull	= 0x0080,
+	CmdBusy		= 0x1000
+};
+
+/* The SetRxFilter command accepts the following classes: */
+enum RxFilter {
+	RxStation	= 1,
+	RxMulticast	= 2,
+	RxBroadcast	= 4,
+	RxProm		= 8
+};
+
+/* Register window 1 offsets, the window used in normal operation. */
+#define TX_FIFO		0x00
+#define RX_FIFO		0x00
+#define RX_STATUS	0x08
+#define TX_STATUS	0x0B
+#define TX_FREE		0x0C	/* Remaining free bytes in Tx buffer. */
+
+#define WN0_IRQ		0x08	/* Window 0: Set IRQ line in bits 12-15. */
+#define WN4_MEDIA	0x0A	/* Window 4: Various transcvr/media bits. */
+#define MEDIA_TP	0x00C0	/* Enable link beat and jabber for 10baseT. */
+#define MEDIA_LED	0x0001	/* Enable link light on 3C589E cards. */
+
+/* Time in jiffies before concluding Tx hung */
+#define TX_TIMEOUT	((400*HZ)/1000)
+
+struct el3_private {
+	struct pcmcia_device	*p_dev;
+	/* For transceiver monitoring */
+	struct timer_list	media;
+	u16			media_status;
+	u16			fast_poll;
+	unsigned long		last_irq;
+	spinlock_t		lock;
+};
+
+static const char *if_names[] = { "auto", "10baseT", "10base2", "AUI" };
+
+/*====================================================================*/
+
+/* Module parameters */
+
+MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
+MODULE_DESCRIPTION("3Com 3c589 series PCMCIA ethernet driver");
+MODULE_LICENSE("GPL");
+
+#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
+
+/* Special hook for setting if_port when module is loaded */
+INT_MODULE_PARM(if_port, 0);
+
+
+/*====================================================================*/
+
+static int tc589_config(struct pcmcia_device *link);
+static void tc589_release(struct pcmcia_device *link);
+
+static u16 read_eeprom(unsigned int ioaddr, int index);
+static void tc589_reset(struct net_device *dev);
+static void media_check(struct timer_list *t);
+static int el3_config(struct net_device *dev, struct ifmap *map);
+static int el3_open(struct net_device *dev);
+static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
+					struct net_device *dev);
+static irqreturn_t el3_interrupt(int irq, void *dev_id);
+static void update_stats(struct net_device *dev);
+static struct net_device_stats *el3_get_stats(struct net_device *dev);
+static int el3_rx(struct net_device *dev);
+static int el3_close(struct net_device *dev);
+static void el3_tx_timeout(struct net_device *dev, unsigned int txqueue);
+static void set_rx_mode(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+static const struct ethtool_ops netdev_ethtool_ops;
+
+static void tc589_detach(struct pcmcia_device *p_dev);
+
+static const struct net_device_ops el3_netdev_ops = {
+	.ndo_open		= el3_open,
+	.ndo_stop		= el3_close,
+	.ndo_start_xmit		= el3_start_xmit,
+	.ndo_tx_timeout		= el3_tx_timeout,
+	.ndo_set_config		= el3_config,
+	.ndo_get_stats		= el3_get_stats,
+	.ndo_set_rx_mode	= set_multicast_list,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+static int tc589_probe(struct pcmcia_device *link)
+{
+	struct el3_private *lp;
+	struct net_device *dev;
+	int ret;
+
+	dev_dbg(&link->dev, "3c589_attach()\n");
+
+	/* Create new ethernet device */
+	dev = alloc_etherdev(sizeof(struct el3_private));
+	if (!dev)
+		return -ENOMEM;
+	lp = netdev_priv(dev);
+	link->priv = dev;
+	lp->p_dev = link;
+
+	spin_lock_init(&lp->lock);
+	link->resource[0]->end = 16;
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
+
+	link->config_flags |= CONF_ENABLE_IRQ;
+	link->config_index = 1;
+
+	dev->netdev_ops = &el3_netdev_ops;
+	dev->watchdog_timeo = TX_TIMEOUT;
+
+	dev->ethtool_ops = &netdev_ethtool_ops;
+
+	ret = tc589_config(link);
+	if (ret)
+		goto err_free_netdev;
+
+	return 0;
+
+err_free_netdev:
+	free_netdev(dev);
+	return ret;
+}
+
+static void tc589_detach(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+
+	dev_dbg(&link->dev, "3c589_detach\n");
+
+	unregister_netdev(dev);
+
+	tc589_release(link);
+
+	free_netdev(dev);
+} /* tc589_detach */
+
+static int tc589_config(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+	int ret, i, j, multi = 0, fifo;
+	__be16 addr[ETH_ALEN / 2];
+	unsigned int ioaddr;
+	static const char * const ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
+	u8 *buf;
+	size_t len;
+
+	dev_dbg(&link->dev, "3c589_config\n");
+
+	/* Is this a 3c562? */
+	if (link->manf_id != MANFID_3COM)
+		dev_info(&link->dev, "hmmm, is this really a 3Com card??\n");
+	multi = (link->card_id == PRODID_3COM_3C562);
+
+	link->io_lines = 16;
+
+	/* For the 3c562, the base address must be xx00-xx7f */
+	for (i = j = 0; j < 0x400; j += 0x10) {
+		if (multi && (j & 0x80))
+			continue;
+		link->resource[0]->start = j ^ 0x300;
+		i = pcmcia_request_io(link);
+		if (i == 0)
+			break;
+	}
+	if (i != 0)
+		goto failed;
+
+	ret = pcmcia_request_irq(link, el3_interrupt);
+	if (ret)
+		goto failed;
+
+	ret = pcmcia_enable_device(link);
+	if (ret)
+		goto failed;
+
+	dev->irq = link->irq;
+	dev->base_addr = link->resource[0]->start;
+	ioaddr = dev->base_addr;
+	EL3WINDOW(0);
+
+	/* The 3c589 has an extra EEPROM for configuration info, including
+	 * the hardware address.  The 3c562 puts the address in the CIS.
+	 */
+	len = pcmcia_get_tuple(link, 0x88, &buf);
+	if (buf && len >= 6) {
+		for (i = 0; i < 3; i++)
+			addr[i] = htons(le16_to_cpu(buf[i*2]));
+		kfree(buf);
+	} else {
+		kfree(buf); /* 0 < len < 6 */
+		for (i = 0; i < 3; i++)
+			addr[i] = htons(read_eeprom(ioaddr, i));
+		if (addr[0] == htons(0x6060)) {
+			dev_err(&link->dev, "IO port conflict at 0x%03lx-0x%03lx\n",
+					dev->base_addr, dev->base_addr+15);
+			goto failed;
+		}
+	}
+	eth_hw_addr_set(dev, (u8 *)addr);
+
+	/* The address and resource configuration register aren't loaded from
+	 * the EEPROM and *must* be set to 0 and IRQ3 for the PCMCIA version.
+	 */
+
+	outw(0x3f00, ioaddr + 8);
+	fifo = inl(ioaddr);
+
+	/* The if_port symbol can be set when the module is loaded */
+	if ((if_port >= 0) && (if_port <= 3))
+		dev->if_port = if_port;
+	else
+		dev_err(&link->dev, "invalid if_port requested\n");
+
+	SET_NETDEV_DEV(dev, &link->dev);
+
+	if (register_netdev(dev) != 0) {
+		dev_err(&link->dev, "register_netdev() failed\n");
+		goto failed;
+	}
+
+	netdev_info(dev, "3Com 3c%s, io %#3lx, irq %d, hw_addr %pM\n",
+			(multi ? "562" : "589"), dev->base_addr, dev->irq,
+			dev->dev_addr);
+	netdev_info(dev, "  %dK FIFO split %s Rx:Tx, %s xcvr\n",
+			(fifo & 7) ? 32 : 8, ram_split[(fifo >> 16) & 3],
+			if_names[dev->if_port]);
+	return 0;
+
+failed:
+	tc589_release(link);
+	return -ENODEV;
+} /* tc589_config */
+
+static void tc589_release(struct pcmcia_device *link)
+{
+	pcmcia_disable_device(link);
+}
+
+static int tc589_suspend(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+
+	if (link->open)
+		netif_device_detach(dev);
+
+	return 0;
+}
+
+static int tc589_resume(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+
+	if (link->open) {
+		tc589_reset(dev);
+		netif_device_attach(dev);
+	}
+
+	return 0;
+}
+
+/*====================================================================*/
+
+/* Use this for commands that may take time to finish */
+
+static void tc589_wait_for_completion(struct net_device *dev, int cmd)
+{
+	int i = 100;
+	outw(cmd, dev->base_addr + EL3_CMD);
+	while (--i > 0)
+		if (!(inw(dev->base_addr + EL3_STATUS) & 0x1000))
+			break;
+	if (i == 0)
+		netdev_warn(dev, "command 0x%04x did not complete!\n", cmd);
+}
+
+/* Read a word from the EEPROM using the regular EEPROM access register.
+ * Assume that we are in register window zero.
+ */
+
+static u16 read_eeprom(unsigned int ioaddr, int index)
+{
+	int i;
+	outw(EEPROM_READ + index, ioaddr + 10);
+	/* Reading the eeprom takes 162 us */
+	for (i = 1620; i >= 0; i--)
+		if ((inw(ioaddr + 10) & EEPROM_BUSY) == 0)
+			break;
+	return inw(ioaddr + 12);
+}
+
+/* Set transceiver type, perhaps to something other than what the user
+ * specified in dev->if_port.
+ */
+
+static void tc589_set_xcvr(struct net_device *dev, int if_port)
+{
+	struct el3_private *lp = netdev_priv(dev);
+	unsigned int ioaddr = dev->base_addr;
+
+	EL3WINDOW(0);
+	switch (if_port) {
+	case 0:
+	case 1:
+		outw(0, ioaddr + 6);
+		break;
+	case 2:
+		outw(3<<14, ioaddr + 6);
+		break;
+	case 3:
+		outw(1<<14, ioaddr + 6);
+		break;
+	}
+	/* On PCMCIA, this just turns on the LED */
+	outw((if_port == 2) ? StartCoax : StopCoax, ioaddr + EL3_CMD);
+	/* 10baseT interface, enable link beat and jabber check. */
+	EL3WINDOW(4);
+	outw(MEDIA_LED | ((if_port < 2) ? MEDIA_TP : 0), ioaddr + WN4_MEDIA);
+	EL3WINDOW(1);
+	if (if_port == 2)
+		lp->media_status = ((dev->if_port == 0) ? 0x8000 : 0x4000);
+	else
+		lp->media_status = ((dev->if_port == 0) ? 0x4010 : 0x8800);
+}
+
+static void dump_status(struct net_device *dev)
+{
+	unsigned int ioaddr = dev->base_addr;
+	EL3WINDOW(1);
+	netdev_info(dev, "  irq status %04x, rx status %04x, tx status %02x  tx free %04x\n",
+			inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS),
+			inb(ioaddr+TX_STATUS), inw(ioaddr+TX_FREE));
+	EL3WINDOW(4);
+	netdev_info(dev, "  diagnostics: fifo %04x net %04x ethernet %04x media %04x\n",
+			inw(ioaddr+0x04), inw(ioaddr+0x06), inw(ioaddr+0x08),
+			inw(ioaddr+0x0a));
+	EL3WINDOW(1);
+}
+
+/* Reset and restore all of the 3c589 registers. */
+static void tc589_reset(struct net_device *dev)
+{
+	unsigned int ioaddr = dev->base_addr;
+	int i;
+
+	EL3WINDOW(0);
+	outw(0x0001, ioaddr + 4);			/* Activate board. */
+	outw(0x3f00, ioaddr + 8);			/* Set the IRQ line. */
+
+	/* Set the station address in window 2. */
+	EL3WINDOW(2);
+	for (i = 0; i < 6; i++)
+		outb(dev->dev_addr[i], ioaddr + i);
+
+	tc589_set_xcvr(dev, dev->if_port);
+
+	/* Switch to the stats window, and clear all stats by reading. */
+	outw(StatsDisable, ioaddr + EL3_CMD);
+	EL3WINDOW(6);
+	for (i = 0; i < 9; i++)
+		inb(ioaddr+i);
+	inw(ioaddr + 10);
+	inw(ioaddr + 12);
+
+	/* Switch to register set 1 for normal use. */
+	EL3WINDOW(1);
+
+	set_rx_mode(dev);
+	outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
+	outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
+	outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
+	/* Allow status bits to be seen. */
+	outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD);
+	/* Ack all pending events, and set active indicator mask. */
+	outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
+	 ioaddr + EL3_CMD);
+	outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull
+	 | AdapterFailure, ioaddr + EL3_CMD);
+}
+
+static void netdev_get_drvinfo(struct net_device *dev,
+			       struct ethtool_drvinfo *info)
+{
+	strscpy(info->driver, DRV_NAME, sizeof(info->driver));
+	snprintf(info->bus_info, sizeof(info->bus_info),
+		"PCMCIA 0x%lx", dev->base_addr);
+}
+
+static const struct ethtool_ops netdev_ethtool_ops = {
+	.get_drvinfo		= netdev_get_drvinfo,
+};
+
+static int el3_config(struct net_device *dev, struct ifmap *map)
+{
+	if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
+		if (map->port <= 3) {
+			dev->if_port = map->port;
+			netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]);
+			tc589_set_xcvr(dev, dev->if_port);
+		} else {
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+
+static int el3_open(struct net_device *dev)
+{
+	struct el3_private *lp = netdev_priv(dev);
+	struct pcmcia_device *link = lp->p_dev;
+
+	if (!pcmcia_dev_present(link))
+		return -ENODEV;
+
+	link->open++;
+	netif_start_queue(dev);
+
+	tc589_reset(dev);
+	timer_setup(&lp->media, media_check, 0);
+	mod_timer(&lp->media, jiffies + HZ);
+
+	dev_dbg(&link->dev, "%s: opened, status %4.4x.\n",
+	  dev->name, inw(dev->base_addr + EL3_STATUS));
+
+	return 0;
+}
+
+static void el3_tx_timeout(struct net_device *dev, unsigned int txqueue)
+{
+	unsigned int ioaddr = dev->base_addr;
+
+	netdev_warn(dev, "Transmit timed out!\n");
+	dump_status(dev);
+	dev->stats.tx_errors++;
+	netif_trans_update(dev); /* prevent tx timeout */
+	/* Issue TX_RESET and TX_START commands. */
+	tc589_wait_for_completion(dev, TxReset);
+	outw(TxEnable, ioaddr + EL3_CMD);
+	netif_wake_queue(dev);
+}
+
+static void pop_tx_status(struct net_device *dev)
+{
+	unsigned int ioaddr = dev->base_addr;
+	int i;
+
+	/* Clear the Tx status stack. */
+	for (i = 32; i > 0; i--) {
+		u_char tx_status = inb(ioaddr + TX_STATUS);
+		if (!(tx_status & 0x84))
+			break;
+		/* reset transmitter on jabber error or underrun */
+		if (tx_status & 0x30)
+			tc589_wait_for_completion(dev, TxReset);
+		if (tx_status & 0x38) {
+			netdev_dbg(dev, "transmit error: status 0x%02x\n", tx_status);
+			outw(TxEnable, ioaddr + EL3_CMD);
+			dev->stats.tx_aborted_errors++;
+		}
+		outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */
+	}
+}
+
+static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
+					struct net_device *dev)
+{
+	unsigned int ioaddr = dev->base_addr;
+	struct el3_private *priv = netdev_priv(dev);
+	unsigned long flags;
+
+	netdev_dbg(dev, "el3_start_xmit(length = %ld) called, status %4.4x.\n",
+	       (long)skb->len, inw(ioaddr + EL3_STATUS));
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	dev->stats.tx_bytes += skb->len;
+
+	/* Put out the doubleword header... */
+	outw(skb->len, ioaddr + TX_FIFO);
+	outw(0x00, ioaddr + TX_FIFO);
+	/* ... and the packet rounded to a doubleword. */
+	outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
+
+	if (inw(ioaddr + TX_FREE) <= 1536) {
+		netif_stop_queue(dev);
+		/* Interrupt us when the FIFO has room for max-sized packet. */
+		outw(SetTxThreshold + 1536, ioaddr + EL3_CMD);
+	}
+
+	pop_tx_status(dev);
+	spin_unlock_irqrestore(&priv->lock, flags);
+	dev_kfree_skb(skb);
+
+	return NETDEV_TX_OK;
+}
+
+/* The EL3 interrupt handler. */
+static irqreturn_t el3_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = (struct net_device *) dev_id;
+	struct el3_private *lp = netdev_priv(dev);
+	unsigned int ioaddr;
+	__u16 status;
+	int i = 0, handled = 1;
+
+	if (!netif_device_present(dev))
+		return IRQ_NONE;
+
+	ioaddr = dev->base_addr;
+
+	netdev_dbg(dev, "interrupt, status %4.4x.\n", inw(ioaddr + EL3_STATUS));
+
+	spin_lock(&lp->lock);
+	while ((status = inw(ioaddr + EL3_STATUS)) &
+	(IntLatch | RxComplete | StatsFull)) {
+		if ((status & 0xe000) != 0x2000) {
+			netdev_dbg(dev, "interrupt from dead card\n");
+			handled = 0;
+			break;
+		}
+		if (status & RxComplete)
+			el3_rx(dev);
+		if (status & TxAvailable) {
+			netdev_dbg(dev, "    TX room bit was handled.\n");
+			/* There's room in the FIFO for a full-sized packet. */
+			outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
+			netif_wake_queue(dev);
+		}
+		if (status & TxComplete)
+			pop_tx_status(dev);
+		if (status & (AdapterFailure | RxEarly | StatsFull)) {
+			/* Handle all uncommon interrupts. */
+			if (status & StatsFull)		/* Empty statistics. */
+				update_stats(dev);
+			if (status & RxEarly) {
+				/* Rx early is unused. */
+				el3_rx(dev);
+				outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
+			}
+			if (status & AdapterFailure) {
+				u16 fifo_diag;
+				EL3WINDOW(4);
+				fifo_diag = inw(ioaddr + 4);
+				EL3WINDOW(1);
+				netdev_warn(dev, "adapter failure, FIFO diagnostic register %04x.\n",
+			    fifo_diag);
+				if (fifo_diag & 0x0400) {
+					/* Tx overrun */
+					tc589_wait_for_completion(dev, TxReset);
+					outw(TxEnable, ioaddr + EL3_CMD);
+				}
+				if (fifo_diag & 0x2000) {
+					/* Rx underrun */
+					tc589_wait_for_completion(dev, RxReset);
+					set_rx_mode(dev);
+					outw(RxEnable, ioaddr + EL3_CMD);
+				}
+				outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD);
+			}
+		}
+		if (++i > 10) {
+			netdev_err(dev, "infinite loop in interrupt, status %4.4x.\n",
+					status);
+			/* Clear all interrupts */
+			outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
+			break;
+		}
+		/* Acknowledge the IRQ. */
+		outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
+	}
+	lp->last_irq = jiffies;
+	spin_unlock(&lp->lock);
+	netdev_dbg(dev, "exiting interrupt, status %4.4x.\n",
+			inw(ioaddr + EL3_STATUS));
+	return IRQ_RETVAL(handled);
+}
+
+static void media_check(struct timer_list *t)
+{
+	struct el3_private *lp = from_timer(lp, t, media);
+	struct net_device *dev = lp->p_dev->priv;
+	unsigned int ioaddr = dev->base_addr;
+	u16 media, errs;
+	unsigned long flags;
+
+	if (!netif_device_present(dev))
+		goto reschedule;
+
+	/* Check for pending interrupt with expired latency timer: with
+	 * this, we can limp along even if the interrupt is blocked
+	 */
+	if ((inw(ioaddr + EL3_STATUS) & IntLatch) &&
+	(inb(ioaddr + EL3_TIMER) == 0xff)) {
+		if (!lp->fast_poll)
+			netdev_warn(dev, "interrupt(s) dropped!\n");
+
+		local_irq_save(flags);
+		el3_interrupt(dev->irq, dev);
+		local_irq_restore(flags);
+
+		lp->fast_poll = HZ;
+	}
+	if (lp->fast_poll) {
+		lp->fast_poll--;
+		lp->media.expires = jiffies + HZ/100;
+		add_timer(&lp->media);
+		return;
+	}
+
+	/* lp->lock guards the EL3 window. Window should always be 1 except
+	 * when the lock is held
+	 */
+
+	spin_lock_irqsave(&lp->lock, flags);
+	EL3WINDOW(4);
+	media = inw(ioaddr+WN4_MEDIA) & 0xc810;
+
+	/* Ignore collisions unless we've had no irq's recently */
+	if (time_before(jiffies, lp->last_irq + HZ)) {
+		media &= ~0x0010;
+	} else {
+		/* Try harder to detect carrier errors */
+		EL3WINDOW(6);
+		outw(StatsDisable, ioaddr + EL3_CMD);
+		errs = inb(ioaddr + 0);
+		outw(StatsEnable, ioaddr + EL3_CMD);
+		dev->stats.tx_carrier_errors += errs;
+		if (errs || (lp->media_status & 0x0010))
+			media |= 0x0010;
+	}
+
+	if (media != lp->media_status) {
+		if ((media & lp->media_status & 0x8000) &&
+				((lp->media_status ^ media) & 0x0800))
+		netdev_info(dev, "%s link beat\n",
+				(lp->media_status & 0x0800 ? "lost" : "found"));
+		else if ((media & lp->media_status & 0x4000) &&
+		 ((lp->media_status ^ media) & 0x0010))
+		netdev_info(dev, "coax cable %s\n",
+				(lp->media_status & 0x0010 ? "ok" : "problem"));
+		if (dev->if_port == 0) {
+			if (media & 0x8000) {
+				if (media & 0x0800)
+					netdev_info(dev, "flipped to 10baseT\n");
+				else
+			tc589_set_xcvr(dev, 2);
+			} else if (media & 0x4000) {
+				if (media & 0x0010)
+					tc589_set_xcvr(dev, 1);
+				else
+					netdev_info(dev, "flipped to 10base2\n");
+			}
+		}
+		lp->media_status = media;
+	}
+
+	EL3WINDOW(1);
+	spin_unlock_irqrestore(&lp->lock, flags);
+
+reschedule:
+	lp->media.expires = jiffies + HZ;
+	add_timer(&lp->media);
+}
+
+static struct net_device_stats *el3_get_stats(struct net_device *dev)
+{
+	struct el3_private *lp = netdev_priv(dev);
+	unsigned long flags;
+	struct pcmcia_device *link = lp->p_dev;
+
+	if (pcmcia_dev_present(link)) {
+		spin_lock_irqsave(&lp->lock, flags);
+		update_stats(dev);
+		spin_unlock_irqrestore(&lp->lock, flags);
+	}
+	return &dev->stats;
+}
+
+/* Update statistics.  We change to register window 6, so this should be run
+* single-threaded if the device is active. This is expected to be a rare
+* operation, and it's simpler for the rest of the driver to assume that
+* window 1 is always valid rather than use a special window-state variable.
+*
+* Caller must hold the lock for this
+*/
+
+static void update_stats(struct net_device *dev)
+{
+	unsigned int ioaddr = dev->base_addr;
+
+	netdev_dbg(dev, "updating the statistics.\n");
+	/* Turn off statistics updates while reading. */
+	outw(StatsDisable, ioaddr + EL3_CMD);
+	/* Switch to the stats window, and read everything. */
+	EL3WINDOW(6);
+	dev->stats.tx_carrier_errors	+= inb(ioaddr + 0);
+	dev->stats.tx_heartbeat_errors	+= inb(ioaddr + 1);
+	/* Multiple collisions. */
+	inb(ioaddr + 2);
+	dev->stats.collisions		+= inb(ioaddr + 3);
+	dev->stats.tx_window_errors		+= inb(ioaddr + 4);
+	dev->stats.rx_fifo_errors		+= inb(ioaddr + 5);
+	dev->stats.tx_packets		+= inb(ioaddr + 6);
+	/* Rx packets   */
+	inb(ioaddr + 7);
+	/* Tx deferrals */
+	inb(ioaddr + 8);
+	/* Rx octets */
+	inw(ioaddr + 10);
+	/* Tx octets */
+	inw(ioaddr + 12);
+
+	/* Back to window 1, and turn statistics back on. */
+	EL3WINDOW(1);
+	outw(StatsEnable, ioaddr + EL3_CMD);
+}
+
+static int el3_rx(struct net_device *dev)
+{
+	unsigned int ioaddr = dev->base_addr;
+	int worklimit = 32;
+	short rx_status;
+
+	netdev_dbg(dev, "in rx_packet(), status %4.4x, rx_status %4.4x.\n",
+	       inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
+	while (!((rx_status = inw(ioaddr + RX_STATUS)) & 0x8000) &&
+		    worklimit > 0) {
+		worklimit--;
+		if (rx_status & 0x4000) { /* Error, update stats. */
+			short error = rx_status & 0x3800;
+			dev->stats.rx_errors++;
+			switch (error) {
+			case 0x0000:
+				dev->stats.rx_over_errors++;
+				break;
+			case 0x0800:
+				dev->stats.rx_length_errors++;
+				break;
+			case 0x1000:
+				dev->stats.rx_frame_errors++;
+				break;
+			case 0x1800:
+				dev->stats.rx_length_errors++;
+				break;
+			case 0x2000:
+				dev->stats.rx_frame_errors++;
+				break;
+			case 0x2800:
+				dev->stats.rx_crc_errors++;
+				break;
+			}
+		} else {
+			short pkt_len = rx_status & 0x7ff;
+			struct sk_buff *skb;
+
+			skb = netdev_alloc_skb(dev, pkt_len + 5);
+
+			netdev_dbg(dev, "    Receiving packet size %d status %4.4x.\n",
+		       pkt_len, rx_status);
+			if (skb != NULL) {
+				skb_reserve(skb, 2);
+				insl(ioaddr+RX_FIFO, skb_put(skb, pkt_len),
+			(pkt_len+3)>>2);
+				skb->protocol = eth_type_trans(skb, dev);
+				netif_rx(skb);
+				dev->stats.rx_packets++;
+				dev->stats.rx_bytes += pkt_len;
+			} else {
+				netdev_dbg(dev, "couldn't allocate a sk_buff of size %d.\n",
+			   pkt_len);
+				dev->stats.rx_dropped++;
+			}
+		}
+		/* Pop the top of the Rx FIFO */
+		tc589_wait_for_completion(dev, RxDiscard);
+	}
+	if (worklimit == 0)
+		netdev_warn(dev, "too much work in el3_rx!\n");
+	return 0;
+}
+
+static void set_rx_mode(struct net_device *dev)
+{
+	unsigned int ioaddr = dev->base_addr;
+	u16 opts = SetRxFilter | RxStation | RxBroadcast;
+
+	if (dev->flags & IFF_PROMISC)
+		opts |= RxMulticast | RxProm;
+	else if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI))
+		opts |= RxMulticast;
+	outw(opts, ioaddr + EL3_CMD);
+}
+
+static void set_multicast_list(struct net_device *dev)
+{
+	struct el3_private *priv = netdev_priv(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	set_rx_mode(dev);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int el3_close(struct net_device *dev)
+{
+	struct el3_private *lp = netdev_priv(dev);
+	struct pcmcia_device *link = lp->p_dev;
+	unsigned int ioaddr = dev->base_addr;
+
+	dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name);
+
+	if (pcmcia_dev_present(link)) {
+		/* Turn off statistics ASAP.  We update dev->stats below. */
+		outw(StatsDisable, ioaddr + EL3_CMD);
+
+		/* Disable the receiver and transmitter. */
+		outw(RxDisable, ioaddr + EL3_CMD);
+		outw(TxDisable, ioaddr + EL3_CMD);
+
+		if (dev->if_port == 2)
+			/* Turn off thinnet power.  Green! */
+			outw(StopCoax, ioaddr + EL3_CMD);
+		else if (dev->if_port == 1) {
+			/* Disable link beat and jabber */
+			EL3WINDOW(4);
+			outw(0, ioaddr + WN4_MEDIA);
+		}
+
+		/* Switching back to window 0 disables the IRQ. */
+		EL3WINDOW(0);
+		/* But we explicitly zero the IRQ line select anyway. */
+		outw(0x0f00, ioaddr + WN0_IRQ);
+
+		/* Check if the card still exists */
+		if ((inw(ioaddr+EL3_STATUS) & 0xe000) == 0x2000)
+			update_stats(dev);
+	}
+
+	link->open--;
+	netif_stop_queue(dev);
+	del_timer_sync(&lp->media);
+
+	return 0;
+}
+
+static const struct pcmcia_device_id tc589_ids[] = {
+	PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0101, 0x0562),
+	PCMCIA_MFC_DEVICE_PROD_ID1(0, "Motorola MARQUIS", 0xf03e4e77),
+	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0589),
+	PCMCIA_DEVICE_PROD_ID12("Farallon", "ENet", 0x58d93fc4, 0x992c2202),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x0035, "cis/3CXEM556.cis"),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x003d, "cis/3CXEM556.cis"),
+	PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, tc589_ids);
+
+static struct pcmcia_driver tc589_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "3c589_cs",
+	.probe		= tc589_probe,
+	.remove		= tc589_detach,
+	.id_table	= tc589_ids,
+	.suspend	= tc589_suspend,
+	.resume		= tc589_resume,
+};
+module_pcmcia_driver(tc589_driver);
diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c
new file mode 100644
index 000000000..082388bb6
--- /dev/null
+++ b/drivers/net/ethernet/3com/3c59x.c
@@ -0,0 +1,3357 @@
+/* EtherLinkXL.c: A 3Com EtherLink PCI III/XL ethernet driver for linux. */
+/*
+	Written 1996-1999 by Donald Becker.
+
+	This software may be used and distributed according to the terms
+	of the GNU General Public License, incorporated herein by reference.
+
+	This driver is for the 3Com "Vortex" and "Boomerang" series ethercards.
+	Members of the series include Fast EtherLink 3c590/3c592/3c595/3c597
+	and the EtherLink XL 3c900 and 3c905 cards.
+
+	Problem reports and questions should be directed to
+	vortex@scyld.com
+
+	The author may be reached as becker@scyld.com, or C/O
+	Scyld Computing Corporation
+	410 Severn Ave., Suite 210
+	Annapolis MD 21403
+
+*/
+
+/*
+ * FIXME: This driver _could_ support MTU changing, but doesn't.  See Don's hamachi.c implementation
+ * as well as other drivers
+ *
+ * NOTE: If you make 'vortex_debug' a constant (#define vortex_debug 0) the driver shrinks by 2k
+ * due to dead code elimination.  There will be some performance benefits from this due to
+ * elimination of all the tests and reduced cache footprint.
+ */
+
+
+#define DRV_NAME	"3c59x"
+
+
+
+/* A few values that may be tweaked. */
+/* Keep the ring sizes a power of two for efficiency. */
+#define TX_RING_SIZE	16
+#define RX_RING_SIZE	32
+#define PKT_BUF_SZ		1536			/* Size of each temporary Rx buffer.*/
+
+/* "Knobs" that adjust features and parameters. */
+/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
+   Setting to > 1512 effectively disables this feature. */
+#ifndef __arm__
+static int rx_copybreak = 200;
+#else
+/* ARM systems perform better by disregarding the bus-master
+   transfer capability of these cards. -- rmk */
+static int rx_copybreak = 1513;
+#endif
+/* Allow setting MTU to a larger size, bypassing the normal ethernet setup. */
+static const int mtu = 1500;
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+static int max_interrupt_work = 32;
+/* Tx timeout interval (millisecs) */
+static int watchdog = 5000;
+
+/* Allow aggregation of Tx interrupts.  Saves CPU load at the cost
+ * of possible Tx stalls if the system is blocking interrupts
+ * somewhere else.  Undefine this to disable.
+ */
+#define tx_interrupt_mitigation 1
+
+/* Put out somewhat more debugging messages. (0: no msg, 1 minimal .. 6). */
+#define vortex_debug debug
+#ifdef VORTEX_DEBUG
+static int vortex_debug = VORTEX_DEBUG;
+#else
+static int vortex_debug = 1;
+#endif
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/in.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/mii.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/highmem.h>
+#include <linux/eisa.h>
+#include <linux/bitops.h>
+#include <linux/jiffies.h>
+#include <linux/gfp.h>
+#include <asm/irq.h>			/* For nr_irqs only. */
+#include <asm/io.h>
+#include <linux/uaccess.h>
+
+/* Kernel compatibility defines, some common to David Hinds' PCMCIA package.
+   This is only in the support-all-kernels source code. */
+
+#define RUN_AT(x) (jiffies + (x))
+
+#include <linux/delay.h>
+
+
+static const char version[] =
+	DRV_NAME ": Donald Becker and others.\n";
+
+MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
+MODULE_DESCRIPTION("3Com 3c59x/3c9xx ethernet driver ");
+MODULE_LICENSE("GPL");
+
+
+/* Operational parameter that usually are not changed. */
+
+/* The Vortex size is twice that of the original EtherLinkIII series: the
+   runtime register window, window 1, is now always mapped in.
+   The Boomerang size is twice as large as the Vortex -- it has additional
+   bus master control registers. */
+#define VORTEX_TOTAL_SIZE 0x20
+#define BOOMERANG_TOTAL_SIZE 0x40
+
+/* Set iff a MII transceiver on any interface requires mdio preamble.
+   This only set with the original DP83840 on older 3c905 boards, so the extra
+   code size of a per-interface flag is not worthwhile. */
+static char mii_preamble_required;
+
+#define PFX DRV_NAME ": "
+
+
+
+/*
+				Theory of Operation
+
+I. Board Compatibility
+
+This device driver is designed for the 3Com FastEtherLink and FastEtherLink
+XL, 3Com's PCI to 10/100baseT adapters.  It also works with the 10Mbs
+versions of the FastEtherLink cards.  The supported product IDs are
+  3c590, 3c592, 3c595, 3c597, 3c900, 3c905
+
+The related ISA 3c515 is supported with a separate driver, 3c515.c, included
+with the kernel source or available from
+    cesdis.gsfc.nasa.gov:/pub/linux/drivers/3c515.html
+
+II. Board-specific settings
+
+PCI bus devices are configured by the system at boot time, so no jumpers
+need to be set on the board.  The system BIOS should be set to assign the
+PCI INTA signal to an otherwise unused system IRQ line.
+
+The EEPROM settings for media type and forced-full-duplex are observed.
+The EEPROM media type should be left at the default "autoselect" unless using
+10base2 or AUI connections which cannot be reliably detected.
+
+III. Driver operation
+
+The 3c59x series use an interface that's very similar to the previous 3c5x9
+series.  The primary interface is two programmed-I/O FIFOs, with an
+alternate single-contiguous-region bus-master transfer (see next).
+
+The 3c900 "Boomerang" series uses a full-bus-master interface with separate
+lists of transmit and receive descriptors, similar to the AMD LANCE/PCnet,
+DEC Tulip and Intel Speedo3.  The first chip version retains a compatible
+programmed-I/O interface that has been removed in 'B' and subsequent board
+revisions.
+
+One extension that is advertised in a very large font is that the adapters
+are capable of being bus masters.  On the Vortex chip this capability was
+only for a single contiguous region making it far less useful than the full
+bus master capability.  There is a significant performance impact of taking
+an extra interrupt or polling for the completion of each transfer, as well
+as difficulty sharing the single transfer engine between the transmit and
+receive threads.  Using DMA transfers is a win only with large blocks or
+with the flawed versions of the Intel Orion motherboard PCI controller.
+
+The Boomerang chip's full-bus-master interface is useful, and has the
+currently-unused advantages over other similar chips that queued transmit
+packets may be reordered and receive buffer groups are associated with a
+single frame.
+
+With full-bus-master support, this driver uses a "RX_COPYBREAK" scheme.
+Rather than a fixed intermediate receive buffer, this scheme allocates
+full-sized skbuffs as receive buffers.  The value RX_COPYBREAK is used as
+the copying breakpoint: it is chosen to trade-off the memory wasted by
+passing the full-sized skbuff to the queue layer for all frames vs. the
+copying cost of copying a frame to a correctly-sized skbuff.
+
+IIIC. Synchronization
+The driver runs as two independent, single-threaded flows of control.  One
+is the send-packet routine, which enforces single-threaded use by the
+dev->tbusy flag.  The other thread is the interrupt handler, which is single
+threaded by the hardware and other software.
+
+IV. Notes
+
+Thanks to Cameron Spitzer and Terry Murphy of 3Com for providing development
+3c590, 3c595, and 3c900 boards.
+The name "Vortex" is the internal 3Com project name for the PCI ASIC, and
+the EISA version is called "Demon".  According to Terry these names come
+from rides at the local amusement park.
+
+The new chips support both ethernet (1.5K) and FDDI (4.5K) packet sizes!
+This driver only supports ethernet packets because of the skbuff allocation
+limit of 4K.
+*/
+
+/* This table drives the PCI probe routines.  It's mostly boilerplate in all
+   of the drivers, and will likely be provided by some future kernel.
+*/
+enum pci_flags_bit {
+	PCI_USES_MASTER=4,
+};
+
+enum {	IS_VORTEX=1, IS_BOOMERANG=2, IS_CYCLONE=4, IS_TORNADO=8,
+	EEPROM_8BIT=0x10,	/* AKPM: Uses 0x230 as the base bitmaps for EEPROM reads */
+	HAS_PWR_CTRL=0x20, HAS_MII=0x40, HAS_NWAY=0x80, HAS_CB_FNS=0x100,
+	INVERT_MII_PWR=0x200, INVERT_LED_PWR=0x400, MAX_COLLISION_RESET=0x800,
+	EEPROM_OFFSET=0x1000, HAS_HWCKSM=0x2000, WNO_XCVR_PWR=0x4000,
+	EXTRA_PREAMBLE=0x8000, EEPROM_RESET=0x10000, };
+
+enum vortex_chips {
+	CH_3C590 = 0,
+	CH_3C592,
+	CH_3C597,
+	CH_3C595_1,
+	CH_3C595_2,
+
+	CH_3C595_3,
+	CH_3C900_1,
+	CH_3C900_2,
+	CH_3C900_3,
+	CH_3C900_4,
+
+	CH_3C900_5,
+	CH_3C900B_FL,
+	CH_3C905_1,
+	CH_3C905_2,
+	CH_3C905B_TX,
+	CH_3C905B_1,
+
+	CH_3C905B_2,
+	CH_3C905B_FX,
+	CH_3C905C,
+	CH_3C9202,
+	CH_3C980,
+	CH_3C9805,
+
+	CH_3CSOHO100_TX,
+	CH_3C555,
+	CH_3C556,
+	CH_3C556B,
+	CH_3C575,
+
+	CH_3C575_1,
+	CH_3CCFE575,
+	CH_3CCFE575CT,
+	CH_3CCFE656,
+	CH_3CCFEM656,
+
+	CH_3CCFEM656_1,
+	CH_3C450,
+	CH_3C920,
+	CH_3C982A,
+	CH_3C982B,
+
+	CH_905BT4,
+	CH_920B_EMB_WNM,
+};
+
+
+/* note: this array directly indexed by above enums, and MUST
+ * be kept in sync with both the enums above, and the PCI device
+ * table below
+ */
+static struct vortex_chip_info {
+	const char *name;
+	int flags;
+	int drv_flags;
+	int io_size;
+} vortex_info_tbl[] = {
+	{"3c590 Vortex 10Mbps",
+	 PCI_USES_MASTER, IS_VORTEX, 32, },
+	{"3c592 EISA 10Mbps Demon/Vortex",					/* AKPM: from Don's 3c59x_cb.c 0.49H */
+	 PCI_USES_MASTER, IS_VORTEX, 32, },
+	{"3c597 EISA Fast Demon/Vortex",					/* AKPM: from Don's 3c59x_cb.c 0.49H */
+	 PCI_USES_MASTER, IS_VORTEX, 32, },
+	{"3c595 Vortex 100baseTx",
+	 PCI_USES_MASTER, IS_VORTEX, 32, },
+	{"3c595 Vortex 100baseT4",
+	 PCI_USES_MASTER, IS_VORTEX, 32, },
+
+	{"3c595 Vortex 100base-MII",
+	 PCI_USES_MASTER, IS_VORTEX, 32, },
+	{"3c900 Boomerang 10baseT",
+	 PCI_USES_MASTER, IS_BOOMERANG|EEPROM_RESET, 64, },
+	{"3c900 Boomerang 10Mbps Combo",
+	 PCI_USES_MASTER, IS_BOOMERANG|EEPROM_RESET, 64, },
+	{"3c900 Cyclone 10Mbps TPO",						/* AKPM: from Don's 0.99M */
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
+	{"3c900 Cyclone 10Mbps Combo",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
+
+	{"3c900 Cyclone 10Mbps TPC",						/* AKPM: from Don's 0.99M */
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
+	{"3c900B-FL Cyclone 10base-FL",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
+	{"3c905 Boomerang 100baseTx",
+	 PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, },
+	{"3c905 Boomerang 100baseT4",
+	 PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, },
+	{"3C905B-TX Fast Etherlink XL PCI",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
+	{"3c905B Cyclone 100baseTx",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
+
+	{"3c905B Cyclone 10/100/BNC",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, },
+	{"3c905B-FX Cyclone 100baseFx",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
+	{"3c905C Tornado",
+	PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
+	{"3c920B-EMB-WNM (ATI Radeon 9100 IGP)",
+	 PCI_USES_MASTER, IS_TORNADO|HAS_MII|HAS_HWCKSM, 128, },
+	{"3c980 Cyclone",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
+
+	{"3c980C Python-T",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, },
+	{"3cSOHO100-TX Hurricane",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
+	{"3c555 Laptop Hurricane",
+	 PCI_USES_MASTER, IS_CYCLONE|EEPROM_8BIT|HAS_HWCKSM, 128, },
+	{"3c556 Laptop Tornado",
+	 PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|EEPROM_8BIT|HAS_CB_FNS|INVERT_MII_PWR|
+									HAS_HWCKSM, 128, },
+	{"3c556B Laptop Hurricane",
+	 PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|EEPROM_OFFSET|HAS_CB_FNS|INVERT_MII_PWR|
+	                                WNO_XCVR_PWR|HAS_HWCKSM, 128, },
+
+	{"3c575 [Megahertz] 10/100 LAN 	CardBus",
+	PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, 128, },
+	{"3c575 Boomerang CardBus",
+	 PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, 128, },
+	{"3CCFE575BT Cyclone CardBus",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|
+									INVERT_LED_PWR|HAS_HWCKSM, 128, },
+	{"3CCFE575CT Tornado CardBus",
+	 PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR|
+									MAX_COLLISION_RESET|HAS_HWCKSM, 128, },
+	{"3CCFE656 Cyclone CardBus",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR|
+									INVERT_LED_PWR|HAS_HWCKSM, 128, },
+
+	{"3CCFEM656B Cyclone+Winmodem CardBus",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR|
+									INVERT_LED_PWR|HAS_HWCKSM, 128, },
+	{"3CXFEM656C Tornado+Winmodem CardBus",			/* From pcmcia-cs-3.1.5 */
+	 PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR|
+									MAX_COLLISION_RESET|HAS_HWCKSM, 128, },
+	{"3c450 HomePNA Tornado",						/* AKPM: from Don's 0.99Q */
+	 PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, },
+	{"3c920 Tornado",
+	 PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, },
+	{"3c982 Hydra Dual Port A",
+	 PCI_USES_MASTER, IS_TORNADO|HAS_HWCKSM|HAS_NWAY, 128, },
+
+	{"3c982 Hydra Dual Port B",
+	 PCI_USES_MASTER, IS_TORNADO|HAS_HWCKSM|HAS_NWAY, 128, },
+	{"3c905B-T4",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
+	{"3c920B-EMB-WNM Tornado",
+	 PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, },
+
+	{NULL,}, /* NULL terminated list. */
+};
+
+
+static const struct pci_device_id vortex_pci_tbl[] = {
+	{ 0x10B7, 0x5900, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C590 },
+	{ 0x10B7, 0x5920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C592 },
+	{ 0x10B7, 0x5970, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C597 },
+	{ 0x10B7, 0x5950, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C595_1 },
+	{ 0x10B7, 0x5951, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C595_2 },
+
+	{ 0x10B7, 0x5952, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C595_3 },
+	{ 0x10B7, 0x9000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_1 },
+	{ 0x10B7, 0x9001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_2 },
+	{ 0x10B7, 0x9004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_3 },
+	{ 0x10B7, 0x9005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_4 },
+
+	{ 0x10B7, 0x9006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_5 },
+	{ 0x10B7, 0x900A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900B_FL },
+	{ 0x10B7, 0x9050, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_1 },
+	{ 0x10B7, 0x9051, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_2 },
+	{ 0x10B7, 0x9054, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_TX },
+	{ 0x10B7, 0x9055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_1 },
+
+	{ 0x10B7, 0x9058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_2 },
+	{ 0x10B7, 0x905A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_FX },
+	{ 0x10B7, 0x9200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905C },
+	{ 0x10B7, 0x9202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C9202 },
+	{ 0x10B7, 0x9800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C980 },
+	{ 0x10B7, 0x9805, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C9805 },
+
+	{ 0x10B7, 0x7646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CSOHO100_TX },
+	{ 0x10B7, 0x5055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C555 },
+	{ 0x10B7, 0x6055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C556 },
+	{ 0x10B7, 0x6056, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C556B },
+	{ 0x10B7, 0x5b57, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C575 },
+
+	{ 0x10B7, 0x5057, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C575_1 },
+	{ 0x10B7, 0x5157, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFE575 },
+	{ 0x10B7, 0x5257, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFE575CT },
+	{ 0x10B7, 0x6560, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFE656 },
+	{ 0x10B7, 0x6562, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFEM656 },
+
+	{ 0x10B7, 0x6564, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFEM656_1 },
+	{ 0x10B7, 0x4500, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C450 },
+	{ 0x10B7, 0x9201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C920 },
+	{ 0x10B7, 0x1201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C982A },
+	{ 0x10B7, 0x1202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C982B },
+
+	{ 0x10B7, 0x9056, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_905BT4 },
+	{ 0x10B7, 0x9210, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_920B_EMB_WNM },
+
+	{0,}						/* 0 terminated list. */
+};
+MODULE_DEVICE_TABLE(pci, vortex_pci_tbl);
+
+
+/* Operational definitions.
+   These are not used by other compilation units and thus are not
+   exported in a ".h" file.
+
+   First the windows.  There are eight register windows, with the command
+   and status registers available in each.
+   */
+#define EL3_CMD 0x0e
+#define EL3_STATUS 0x0e
+
+/* The top five bits written to EL3_CMD are a command, the lower
+   11 bits are the parameter, if applicable.
+   Note that 11 parameters bits was fine for ethernet, but the new chip
+   can handle FDDI length frames (~4500 octets) and now parameters count
+   32-bit 'Dwords' rather than octets. */
+
+enum vortex_cmd {
+	TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11,
+	RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11,
+	UpStall = 6<<11, UpUnstall = (6<<11)+1,
+	DownStall = (6<<11)+2, DownUnstall = (6<<11)+3,
+	RxDiscard = 8<<11, TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11,
+	FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11,
+	SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11,
+	SetTxThreshold = 18<<11, SetTxStart = 19<<11,
+	StartDMAUp = 20<<11, StartDMADown = (20<<11)+1, StatsEnable = 21<<11,
+	StatsDisable = 22<<11, StopCoax = 23<<11, SetFilterBit = 25<<11,};
+
+/* The SetRxFilter command accepts the following classes: */
+enum RxFilter {
+	RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 };
+
+/* Bits in the general status register. */
+enum vortex_status {
+	IntLatch = 0x0001, HostError = 0x0002, TxComplete = 0x0004,
+	TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
+	IntReq = 0x0040, StatsFull = 0x0080,
+	DMADone = 1<<8, DownComplete = 1<<9, UpComplete = 1<<10,
+	DMAInProgress = 1<<11,			/* DMA controller is still busy.*/
+	CmdInProgress = 1<<12,			/* EL3_CMD is still busy.*/
+};
+
+/* Register window 1 offsets, the window used in normal operation.
+   On the Vortex this window is always mapped at offsets 0x10-0x1f. */
+enum Window1 {
+	TX_FIFO = 0x10,  RX_FIFO = 0x10,  RxErrors = 0x14,
+	RxStatus = 0x18,  Timer=0x1A, TxStatus = 0x1B,
+	TxFree = 0x1C, /* Remaining free bytes in Tx buffer. */
+};
+enum Window0 {
+	Wn0EepromCmd = 10,		/* Window 0: EEPROM command register. */
+	Wn0EepromData = 12,		/* Window 0: EEPROM results register. */
+	IntrStatus=0x0E,		/* Valid in all windows. */
+};
+enum Win0_EEPROM_bits {
+	EEPROM_Read = 0x80, EEPROM_WRITE = 0x40, EEPROM_ERASE = 0xC0,
+	EEPROM_EWENB = 0x30,		/* Enable erasing/writing for 10 msec. */
+	EEPROM_EWDIS = 0x00,		/* Disable EWENB before 10 msec timeout. */
+};
+/* EEPROM locations. */
+enum eeprom_offset {
+	PhysAddr01=0, PhysAddr23=1, PhysAddr45=2, ModelID=3,
+	EtherLink3ID=7, IFXcvrIO=8, IRQLine=9,
+	NodeAddr01=10, NodeAddr23=11, NodeAddr45=12,
+	DriverTune=13, Checksum=15};
+
+enum Window2 {			/* Window 2. */
+	Wn2_ResetOptions=12,
+};
+enum Window3 {			/* Window 3: MAC/config bits. */
+	Wn3_Config=0, Wn3_MaxPktSize=4, Wn3_MAC_Ctrl=6, Wn3_Options=8,
+};
+
+#define BFEXT(value, offset, bitcount)  \
+    ((((unsigned long)(value)) >> (offset)) & ((1 << (bitcount)) - 1))
+
+#define BFINS(lhs, rhs, offset, bitcount)					\
+	(((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) |	\
+	(((rhs) & ((1 << (bitcount)) - 1)) << (offset)))
+
+#define RAM_SIZE(v)		BFEXT(v, 0, 3)
+#define RAM_WIDTH(v)	BFEXT(v, 3, 1)
+#define RAM_SPEED(v)	BFEXT(v, 4, 2)
+#define ROM_SIZE(v)		BFEXT(v, 6, 2)
+#define RAM_SPLIT(v)	BFEXT(v, 16, 2)
+#define XCVR(v)			BFEXT(v, 20, 4)
+#define AUTOSELECT(v)	BFEXT(v, 24, 1)
+
+enum Window4 {		/* Window 4: Xcvr/media bits. */
+	Wn4_FIFODiag = 4, Wn4_NetDiag = 6, Wn4_PhysicalMgmt=8, Wn4_Media = 10,
+};
+enum Win4_Media_bits {
+	Media_SQE = 0x0008,		/* Enable SQE error counting for AUI. */
+	Media_10TP = 0x00C0,	/* Enable link beat and jabber for 10baseT. */
+	Media_Lnk = 0x0080,		/* Enable just link beat for 100TX/100FX. */
+	Media_LnkBeat = 0x0800,
+};
+enum Window7 {					/* Window 7: Bus Master control. */
+	Wn7_MasterAddr = 0, Wn7_VlanEtherType=4, Wn7_MasterLen = 6,
+	Wn7_MasterStatus = 12,
+};
+/* Boomerang bus master control registers. */
+enum MasterCtrl {
+	PktStatus = 0x20, DownListPtr = 0x24, FragAddr = 0x28, FragLen = 0x2c,
+	TxFreeThreshold = 0x2f, UpPktStatus = 0x30, UpListPtr = 0x38,
+};
+
+/* The Rx and Tx descriptor lists.
+   Caution Alpha hackers: these types are 32 bits!  Note also the 8 byte
+   alignment contraint on tx_ring[] and rx_ring[]. */
+#define LAST_FRAG 	0x80000000			/* Last Addr/Len pair in descriptor. */
+#define DN_COMPLETE	0x00010000			/* This packet has been downloaded */
+struct boom_rx_desc {
+	__le32 next;					/* Last entry points to 0.   */
+	__le32 status;
+	__le32 addr;					/* Up to 63 addr/len pairs possible. */
+	__le32 length;					/* Set LAST_FRAG to indicate last pair. */
+};
+/* Values for the Rx status entry. */
+enum rx_desc_status {
+	RxDComplete=0x00008000, RxDError=0x4000,
+	/* See boomerang_rx() for actual error bits */
+	IPChksumErr=1<<25, TCPChksumErr=1<<26, UDPChksumErr=1<<27,
+	IPChksumValid=1<<29, TCPChksumValid=1<<30, UDPChksumValid=1<<31,
+};
+
+#ifdef MAX_SKB_FRAGS
+#define DO_ZEROCOPY 1
+#else
+#define DO_ZEROCOPY 0
+#endif
+
+struct boom_tx_desc {
+	__le32 next;					/* Last entry points to 0.   */
+	__le32 status;					/* bits 0:12 length, others see below.  */
+#if DO_ZEROCOPY
+	struct {
+		__le32 addr;
+		__le32 length;
+	} frag[1+MAX_SKB_FRAGS];
+#else
+		__le32 addr;
+		__le32 length;
+#endif
+};
+
+/* Values for the Tx status entry. */
+enum tx_desc_status {
+	CRCDisable=0x2000, TxDComplete=0x8000,
+	AddIPChksum=0x02000000, AddTCPChksum=0x04000000, AddUDPChksum=0x08000000,
+	TxIntrUploaded=0x80000000,		/* IRQ when in FIFO, but maybe not sent. */
+};
+
+/* Chip features we care about in vp->capabilities, read from the EEPROM. */
+enum ChipCaps { CapBusMaster=0x20, CapPwrMgmt=0x2000 };
+
+struct vortex_extra_stats {
+	unsigned long tx_deferred;
+	unsigned long tx_max_collisions;
+	unsigned long tx_multiple_collisions;
+	unsigned long tx_single_collisions;
+	unsigned long rx_bad_ssd;
+};
+
+struct vortex_private {
+	/* The Rx and Tx rings should be quad-word-aligned. */
+	struct boom_rx_desc* rx_ring;
+	struct boom_tx_desc* tx_ring;
+	dma_addr_t rx_ring_dma;
+	dma_addr_t tx_ring_dma;
+	/* The addresses of transmit- and receive-in-place skbuffs. */
+	struct sk_buff* rx_skbuff[RX_RING_SIZE];
+	struct sk_buff* tx_skbuff[TX_RING_SIZE];
+	unsigned int cur_rx, cur_tx;		/* The next free ring entry */
+	unsigned int dirty_tx;	/* The ring entries to be free()ed. */
+	struct vortex_extra_stats xstats;	/* NIC-specific extra stats */
+	struct sk_buff *tx_skb;				/* Packet being eaten by bus master ctrl.  */
+	dma_addr_t tx_skb_dma;				/* Allocated DMA address for bus master ctrl DMA.   */
+
+	/* PCI configuration space information. */
+	struct device *gendev;
+	void __iomem *ioaddr;			/* IO address space */
+	void __iomem *cb_fn_base;		/* CardBus function status addr space. */
+
+	/* Some values here only for performance evaluation and path-coverage */
+	int rx_nocopy, rx_copy, queued_packet, rx_csumhits;
+	int card_idx;
+
+	/* The remainder are related to chip state, mostly media selection. */
+	struct timer_list timer;			/* Media selection timer. */
+	int options;						/* User-settable misc. driver options. */
+	unsigned int media_override:4, 		/* Passed-in media type. */
+		default_media:4,				/* Read from the EEPROM/Wn3_Config. */
+		full_duplex:1, autoselect:1,
+		bus_master:1,					/* Vortex can only do a fragment bus-m. */
+		full_bus_master_tx:1, full_bus_master_rx:2, /* Boomerang  */
+		flow_ctrl:1,					/* Use 802.3x flow control (PAUSE only) */
+		partner_flow_ctrl:1,			/* Partner supports flow control */
+		has_nway:1,
+		enable_wol:1,					/* Wake-on-LAN is enabled */
+		pm_state_valid:1,				/* pci_dev->saved_config_space has sane contents */
+		open:1,
+		medialock:1,
+		large_frames:1,			/* accept large frames */
+		handling_irq:1;			/* private in_irq indicator */
+	/* {get|set}_wol operations are already serialized by rtnl.
+	 * no additional locking is required for the enable_wol and acpi_set_WOL()
+	 */
+	int drv_flags;
+	u16 status_enable;
+	u16 intr_enable;
+	u16 available_media;				/* From Wn3_Options. */
+	u16 capabilities, info1, info2;		/* Various, from EEPROM. */
+	u16 advertising;					/* NWay media advertisement */
+	unsigned char phys[2];				/* MII device addresses. */
+	u16 deferred;						/* Resend these interrupts when we
+										 * bale from the ISR */
+	u16 io_size;						/* Size of PCI region (for release_region) */
+
+	/* Serialises access to hardware other than MII and variables below.
+	 * The lock hierarchy is rtnl_lock > {lock, mii_lock} > window_lock. */
+	spinlock_t lock;
+
+	spinlock_t mii_lock;		/* Serialises access to MII */
+	struct mii_if_info mii;		/* MII lib hooks/info */
+	spinlock_t window_lock;		/* Serialises access to windowed regs */
+	int window;			/* Register window */
+};
+
+static void window_set(struct vortex_private *vp, int window)
+{
+	if (window != vp->window) {
+		iowrite16(SelectWindow + window, vp->ioaddr + EL3_CMD);
+		vp->window = window;
+	}
+}
+
+#define DEFINE_WINDOW_IO(size)						\
+static u ## size							\
+window_read ## size(struct vortex_private *vp, int window, int addr)	\
+{									\
+	unsigned long flags;						\
+	u ## size ret;							\
+	spin_lock_irqsave(&vp->window_lock, flags);			\
+	window_set(vp, window);						\
+	ret = ioread ## size(vp->ioaddr + addr);			\
+	spin_unlock_irqrestore(&vp->window_lock, flags);		\
+	return ret;							\
+}									\
+static void								\
+window_write ## size(struct vortex_private *vp, u ## size value,	\
+		     int window, int addr)				\
+{									\
+	unsigned long flags;						\
+	spin_lock_irqsave(&vp->window_lock, flags);			\
+	window_set(vp, window);						\
+	iowrite ## size(value, vp->ioaddr + addr);			\
+	spin_unlock_irqrestore(&vp->window_lock, flags);		\
+}
+DEFINE_WINDOW_IO(8)
+DEFINE_WINDOW_IO(16)
+DEFINE_WINDOW_IO(32)
+
+#ifdef CONFIG_PCI
+#define DEVICE_PCI(dev) ((dev_is_pci(dev)) ? to_pci_dev((dev)) : NULL)
+#else
+#define DEVICE_PCI(dev) NULL
+#endif
+
+#define VORTEX_PCI(vp)							\
+	((struct pci_dev *) (((vp)->gendev) ? DEVICE_PCI((vp)->gendev) : NULL))
+
+#ifdef CONFIG_EISA
+#define DEVICE_EISA(dev) (((dev)->bus == &eisa_bus_type) ? to_eisa_device((dev)) : NULL)
+#else
+#define DEVICE_EISA(dev) NULL
+#endif
+
+#define VORTEX_EISA(vp)							\
+	((struct eisa_device *) (((vp)->gendev) ? DEVICE_EISA((vp)->gendev) : NULL))
+
+/* The action to take with a media selection timer tick.
+   Note that we deviate from the 3Com order by checking 10base2 before AUI.
+ */
+enum xcvr_types {
+	XCVR_10baseT=0, XCVR_AUI, XCVR_10baseTOnly, XCVR_10base2, XCVR_100baseTx,
+	XCVR_100baseFx, XCVR_MII=6, XCVR_NWAY=8, XCVR_ExtMII=9, XCVR_Default=10,
+};
+
+static const struct media_table {
+	char *name;
+	unsigned int media_bits:16,		/* Bits to set in Wn4_Media register. */
+		mask:8,						/* The transceiver-present bit in Wn3_Config.*/
+		next:8;						/* The media type to try next. */
+	int wait;						/* Time before we check media status. */
+} media_tbl[] = {
+  {	"10baseT",   Media_10TP,0x08, XCVR_10base2, (14*HZ)/10},
+  { "10Mbs AUI", Media_SQE, 0x20, XCVR_Default, (1*HZ)/10},
+  { "undefined", 0,			0x80, XCVR_10baseT, 10000},
+  { "10base2",   0,			0x10, XCVR_AUI,		(1*HZ)/10},
+  { "100baseTX", Media_Lnk, 0x02, XCVR_100baseFx, (14*HZ)/10},
+  { "100baseFX", Media_Lnk, 0x04, XCVR_MII,		(14*HZ)/10},
+  { "MII",		 0,			0x41, XCVR_10baseT, 3*HZ },
+  { "undefined", 0,			0x01, XCVR_10baseT, 10000},
+  { "Autonegotiate", 0,		0x41, XCVR_10baseT, 3*HZ},
+  { "MII-External",	 0,		0x41, XCVR_10baseT, 3*HZ },
+  { "Default",	 0,			0xFF, XCVR_10baseT, 10000},
+};
+
+static struct {
+	const char str[ETH_GSTRING_LEN];
+} ethtool_stats_keys[] = {
+	{ "tx_deferred" },
+	{ "tx_max_collisions" },
+	{ "tx_multiple_collisions" },
+	{ "tx_single_collisions" },
+	{ "rx_bad_ssd" },
+};
+
+/* number of ETHTOOL_GSTATS u64's */
+#define VORTEX_NUM_STATS    5
+
+static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq,
+				   int chip_idx, int card_idx);
+static int vortex_up(struct net_device *dev);
+static void vortex_down(struct net_device *dev, int final);
+static int vortex_open(struct net_device *dev);
+static void mdio_sync(struct vortex_private *vp, int bits);
+static int mdio_read(struct net_device *dev, int phy_id, int location);
+static void mdio_write(struct net_device *vp, int phy_id, int location, int value);
+static void vortex_timer(struct timer_list *t);
+static netdev_tx_t vortex_start_xmit(struct sk_buff *skb,
+				     struct net_device *dev);
+static netdev_tx_t boomerang_start_xmit(struct sk_buff *skb,
+					struct net_device *dev);
+static int vortex_rx(struct net_device *dev);
+static int boomerang_rx(struct net_device *dev);
+static irqreturn_t vortex_boomerang_interrupt(int irq, void *dev_id);
+static irqreturn_t _vortex_interrupt(int irq, struct net_device *dev);
+static irqreturn_t _boomerang_interrupt(int irq, struct net_device *dev);
+static int vortex_close(struct net_device *dev);
+static void dump_tx_ring(struct net_device *dev);
+static void update_stats(void __iomem *ioaddr, struct net_device *dev);
+static struct net_device_stats *vortex_get_stats(struct net_device *dev);
+static void set_rx_mode(struct net_device *dev);
+#ifdef CONFIG_PCI
+static int vortex_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+#endif
+static void vortex_tx_timeout(struct net_device *dev, unsigned int txqueue);
+static void acpi_set_WOL(struct net_device *dev);
+static const struct ethtool_ops vortex_ethtool_ops;
+static void set_8021q_mode(struct net_device *dev, int enable);
+
+/* This driver uses 'options' to pass the media type, full-duplex flag, etc. */
+/* Option count limit only -- unlimited interfaces are supported. */
+#define MAX_UNITS 8
+static int options[MAX_UNITS] = { [0 ... MAX_UNITS-1] = -1 };
+static int full_duplex[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int hw_checksums[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int flow_ctrl[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int enable_wol[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int use_mmio[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int global_options = -1;
+static int global_full_duplex = -1;
+static int global_enable_wol = -1;
+static int global_use_mmio = -1;
+
+/* Variables to work-around the Compaq PCI BIOS32 problem. */
+static int compaq_ioaddr, compaq_irq, compaq_device_id = 0x5900;
+static struct net_device *compaq_net_device;
+
+static int vortex_cards_found;
+
+module_param(debug, int, 0);
+module_param(global_options, int, 0);
+module_param_array(options, int, NULL, 0);
+module_param(global_full_duplex, int, 0);
+module_param_array(full_duplex, int, NULL, 0);
+module_param_array(hw_checksums, int, NULL, 0);
+module_param_array(flow_ctrl, int, NULL, 0);
+module_param(global_enable_wol, int, 0);
+module_param_array(enable_wol, int, NULL, 0);
+module_param(rx_copybreak, int, 0);
+module_param(max_interrupt_work, int, 0);
+module_param_hw(compaq_ioaddr, int, ioport, 0);
+module_param_hw(compaq_irq, int, irq, 0);
+module_param(compaq_device_id, int, 0);
+module_param(watchdog, int, 0);
+module_param(global_use_mmio, int, 0);
+module_param_array(use_mmio, int, NULL, 0);
+MODULE_PARM_DESC(debug, "3c59x debug level (0-6)");
+MODULE_PARM_DESC(options, "3c59x: Bits 0-3: media type, bit 4: bus mastering, bit 9: full duplex");
+MODULE_PARM_DESC(global_options, "3c59x: same as options, but applies to all NICs if options is unset");
+MODULE_PARM_DESC(full_duplex, "3c59x full duplex setting(s) (1)");
+MODULE_PARM_DESC(global_full_duplex, "3c59x: same as full_duplex, but applies to all NICs if full_duplex is unset");
+MODULE_PARM_DESC(hw_checksums, "3c59x Hardware checksum checking by adapter(s) (0-1)");
+MODULE_PARM_DESC(flow_ctrl, "3c59x 802.3x flow control usage (PAUSE only) (0-1)");
+MODULE_PARM_DESC(enable_wol, "3c59x: Turn on Wake-on-LAN for adapter(s) (0-1)");
+MODULE_PARM_DESC(global_enable_wol, "3c59x: same as enable_wol, but applies to all NICs if enable_wol is unset");
+MODULE_PARM_DESC(rx_copybreak, "3c59x copy breakpoint for copy-only-tiny-frames");
+MODULE_PARM_DESC(max_interrupt_work, "3c59x maximum events handled per interrupt");
+MODULE_PARM_DESC(compaq_ioaddr, "3c59x PCI I/O base address (Compaq BIOS problem workaround)");
+MODULE_PARM_DESC(compaq_irq, "3c59x PCI IRQ number (Compaq BIOS problem workaround)");
+MODULE_PARM_DESC(compaq_device_id, "3c59x PCI device ID (Compaq BIOS problem workaround)");
+MODULE_PARM_DESC(watchdog, "3c59x transmit timeout in milliseconds");
+MODULE_PARM_DESC(global_use_mmio, "3c59x: same as use_mmio, but applies to all NICs if options is unset");
+MODULE_PARM_DESC(use_mmio, "3c59x: use memory-mapped PCI I/O resource (0-1)");
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void poll_vortex(struct net_device *dev)
+{
+	vortex_boomerang_interrupt(dev->irq, dev);
+}
+#endif
+
+#ifdef CONFIG_PM
+
+static int vortex_suspend(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+
+	if (!ndev || !netif_running(ndev))
+		return 0;
+
+	netif_device_detach(ndev);
+	vortex_down(ndev, 1);
+
+	return 0;
+}
+
+static int vortex_resume(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	int err;
+
+	if (!ndev || !netif_running(ndev))
+		return 0;
+
+	err = vortex_up(ndev);
+	if (err)
+		return err;
+
+	netif_device_attach(ndev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops vortex_pm_ops = {
+	.suspend = vortex_suspend,
+	.resume = vortex_resume,
+	.freeze = vortex_suspend,
+	.thaw = vortex_resume,
+	.poweroff = vortex_suspend,
+	.restore = vortex_resume,
+};
+
+#define VORTEX_PM_OPS (&vortex_pm_ops)
+
+#else /* !CONFIG_PM */
+
+#define VORTEX_PM_OPS NULL
+
+#endif /* !CONFIG_PM */
+
+#ifdef CONFIG_EISA
+static const struct eisa_device_id vortex_eisa_ids[] = {
+	{ "TCM5920", CH_3C592 },
+	{ "TCM5970", CH_3C597 },
+	{ "" }
+};
+MODULE_DEVICE_TABLE(eisa, vortex_eisa_ids);
+
+static int vortex_eisa_probe(struct device *device)
+{
+	void __iomem *ioaddr;
+	struct eisa_device *edev;
+
+	edev = to_eisa_device(device);
+
+	if (!request_region(edev->base_addr, VORTEX_TOTAL_SIZE, DRV_NAME))
+		return -EBUSY;
+
+	ioaddr = ioport_map(edev->base_addr, VORTEX_TOTAL_SIZE);
+
+	if (vortex_probe1(device, ioaddr, ioread16(ioaddr + 0xC88) >> 12,
+					  edev->id.driver_data, vortex_cards_found)) {
+		release_region(edev->base_addr, VORTEX_TOTAL_SIZE);
+		return -ENODEV;
+	}
+
+	vortex_cards_found++;
+
+	return 0;
+}
+
+static int vortex_eisa_remove(struct device *device)
+{
+	struct eisa_device *edev;
+	struct net_device *dev;
+	struct vortex_private *vp;
+	void __iomem *ioaddr;
+
+	edev = to_eisa_device(device);
+	dev = eisa_get_drvdata(edev);
+
+	if (!dev) {
+		pr_err("vortex_eisa_remove called for Compaq device!\n");
+		BUG();
+	}
+
+	vp = netdev_priv(dev);
+	ioaddr = vp->ioaddr;
+
+	unregister_netdev(dev);
+	iowrite16(TotalReset|0x14, ioaddr + EL3_CMD);
+	release_region(edev->base_addr, VORTEX_TOTAL_SIZE);
+
+	free_netdev(dev);
+	return 0;
+}
+
+static struct eisa_driver vortex_eisa_driver = {
+	.id_table = vortex_eisa_ids,
+	.driver   = {
+		.name    = "3c59x",
+		.probe   = vortex_eisa_probe,
+		.remove  = vortex_eisa_remove
+	}
+};
+
+#endif /* CONFIG_EISA */
+
+/* returns count found (>= 0), or negative on error */
+static int __init vortex_eisa_init(void)
+{
+	int eisa_found = 0;
+	int orig_cards_found = vortex_cards_found;
+
+#ifdef CONFIG_EISA
+	int err;
+
+	err = eisa_driver_register (&vortex_eisa_driver);
+	if (!err) {
+		/*
+		 * Because of the way EISA bus is probed, we cannot assume
+		 * any device have been found when we exit from
+		 * eisa_driver_register (the bus root driver may not be
+		 * initialized yet). So we blindly assume something was
+		 * found, and let the sysfs magic happened...
+		 */
+		eisa_found = 1;
+	}
+#endif
+
+	/* Special code to work-around the Compaq PCI BIOS32 problem. */
+	if (compaq_ioaddr) {
+		vortex_probe1(NULL, ioport_map(compaq_ioaddr, VORTEX_TOTAL_SIZE),
+			      compaq_irq, compaq_device_id, vortex_cards_found++);
+	}
+
+	return vortex_cards_found - orig_cards_found + eisa_found;
+}
+
+/* returns count (>= 0), or negative on error */
+static int vortex_init_one(struct pci_dev *pdev,
+			   const struct pci_device_id *ent)
+{
+	int rc, unit, pci_bar;
+	struct vortex_chip_info *vci;
+	void __iomem *ioaddr;
+
+	/* wake up and enable device */
+	rc = pci_enable_device(pdev);
+	if (rc < 0)
+		goto out;
+
+	rc = pci_request_regions(pdev, DRV_NAME);
+	if (rc < 0)
+		goto out_disable;
+
+	unit = vortex_cards_found;
+
+	if (global_use_mmio < 0 && (unit >= MAX_UNITS || use_mmio[unit] < 0)) {
+		/* Determine the default if the user didn't override us */
+		vci = &vortex_info_tbl[ent->driver_data];
+		pci_bar = vci->drv_flags & (IS_CYCLONE | IS_TORNADO) ? 1 : 0;
+	} else if (unit < MAX_UNITS && use_mmio[unit] >= 0)
+		pci_bar = use_mmio[unit] ? 1 : 0;
+	else
+		pci_bar = global_use_mmio ? 1 : 0;
+
+	ioaddr = pci_iomap(pdev, pci_bar, 0);
+	if (!ioaddr) /* If mapping fails, fall-back to BAR 0... */
+		ioaddr = pci_iomap(pdev, 0, 0);
+	if (!ioaddr) {
+		rc = -ENOMEM;
+		goto out_release;
+	}
+
+	rc = vortex_probe1(&pdev->dev, ioaddr, pdev->irq,
+			   ent->driver_data, unit);
+	if (rc < 0)
+		goto out_iounmap;
+
+	vortex_cards_found++;
+	goto out;
+
+out_iounmap:
+	pci_iounmap(pdev, ioaddr);
+out_release:
+	pci_release_regions(pdev);
+out_disable:
+	pci_disable_device(pdev);
+out:
+	return rc;
+}
+
+static const struct net_device_ops boomrang_netdev_ops = {
+	.ndo_open		= vortex_open,
+	.ndo_stop		= vortex_close,
+	.ndo_start_xmit		= boomerang_start_xmit,
+	.ndo_tx_timeout		= vortex_tx_timeout,
+	.ndo_get_stats		= vortex_get_stats,
+#ifdef CONFIG_PCI
+	.ndo_eth_ioctl		= vortex_ioctl,
+#endif
+	.ndo_set_rx_mode	= set_rx_mode,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= poll_vortex,
+#endif
+};
+
+static const struct net_device_ops vortex_netdev_ops = {
+	.ndo_open		= vortex_open,
+	.ndo_stop		= vortex_close,
+	.ndo_start_xmit		= vortex_start_xmit,
+	.ndo_tx_timeout		= vortex_tx_timeout,
+	.ndo_get_stats		= vortex_get_stats,
+#ifdef CONFIG_PCI
+	.ndo_eth_ioctl		= vortex_ioctl,
+#endif
+	.ndo_set_rx_mode	= set_rx_mode,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= poll_vortex,
+#endif
+};
+
+/*
+ * Start up the PCI/EISA device which is described by *gendev.
+ * Return 0 on success.
+ *
+ * NOTE: pdev can be NULL, for the case of a Compaq device
+ */
+static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq,
+			 int chip_idx, int card_idx)
+{
+	struct vortex_private *vp;
+	int option;
+	unsigned int eeprom[0x40], checksum = 0;		/* EEPROM contents */
+	__be16 addr[ETH_ALEN / 2];
+	int i, step;
+	struct net_device *dev;
+	static int printed_version;
+	int retval, print_info;
+	struct vortex_chip_info * const vci = &vortex_info_tbl[chip_idx];
+	const char *print_name = "3c59x";
+	struct pci_dev *pdev = NULL;
+	struct eisa_device *edev = NULL;
+
+	if (!printed_version) {
+		pr_info("%s", version);
+		printed_version = 1;
+	}
+
+	if (gendev) {
+		if ((pdev = DEVICE_PCI(gendev))) {
+			print_name = pci_name(pdev);
+		}
+
+		if ((edev = DEVICE_EISA(gendev))) {
+			print_name = dev_name(&edev->dev);
+		}
+	}
+
+	dev = alloc_etherdev(sizeof(*vp));
+	retval = -ENOMEM;
+	if (!dev)
+		goto out;
+
+	SET_NETDEV_DEV(dev, gendev);
+	vp = netdev_priv(dev);
+
+	option = global_options;
+
+	/* The lower four bits are the media type. */
+	if (dev->mem_start) {
+		/*
+		 * The 'options' param is passed in as the third arg to the
+		 * LILO 'ether=' argument for non-modular use
+		 */
+		option = dev->mem_start;
+	}
+	else if (card_idx < MAX_UNITS) {
+		if (options[card_idx] >= 0)
+			option = options[card_idx];
+	}
+
+	if (option > 0) {
+		if (option & 0x8000)
+			vortex_debug = 7;
+		if (option & 0x4000)
+			vortex_debug = 2;
+		if (option & 0x0400)
+			vp->enable_wol = 1;
+	}
+
+	print_info = (vortex_debug > 1);
+	if (print_info)
+		pr_info("See Documentation/networking/device_drivers/ethernet/3com/vortex.rst\n");
+
+	pr_info("%s: 3Com %s %s at %p.\n",
+	       print_name,
+	       pdev ? "PCI" : "EISA",
+	       vci->name,
+	       ioaddr);
+
+	dev->base_addr = (unsigned long)ioaddr;
+	dev->irq = irq;
+	dev->mtu = mtu;
+	vp->ioaddr = ioaddr;
+	vp->large_frames = mtu > 1500;
+	vp->drv_flags = vci->drv_flags;
+	vp->has_nway = (vci->drv_flags & HAS_NWAY) ? 1 : 0;
+	vp->io_size = vci->io_size;
+	vp->card_idx = card_idx;
+	vp->window = -1;
+
+	/* module list only for Compaq device */
+	if (gendev == NULL) {
+		compaq_net_device = dev;
+	}
+
+	/* PCI-only startup logic */
+	if (pdev) {
+		/* enable bus-mastering if necessary */
+		if (vci->flags & PCI_USES_MASTER)
+			pci_set_master(pdev);
+
+		if (vci->drv_flags & IS_VORTEX) {
+			u8 pci_latency;
+			u8 new_latency = 248;
+
+			/* Check the PCI latency value.  On the 3c590 series the latency timer
+			   must be set to the maximum value to avoid data corruption that occurs
+			   when the timer expires during a transfer.  This bug exists the Vortex
+			   chip only. */
+			pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency);
+			if (pci_latency < new_latency) {
+				pr_info("%s: Overriding PCI latency timer (CFLT) setting of %d, new value is %d.\n",
+					print_name, pci_latency, new_latency);
+				pci_write_config_byte(pdev, PCI_LATENCY_TIMER, new_latency);
+			}
+		}
+	}
+
+	spin_lock_init(&vp->lock);
+	spin_lock_init(&vp->mii_lock);
+	spin_lock_init(&vp->window_lock);
+	vp->gendev = gendev;
+	vp->mii.dev = dev;
+	vp->mii.mdio_read = mdio_read;
+	vp->mii.mdio_write = mdio_write;
+	vp->mii.phy_id_mask = 0x1f;
+	vp->mii.reg_num_mask = 0x1f;
+
+	/* Makes sure rings are at least 16 byte aligned. */
+	vp->rx_ring = dma_alloc_coherent(gendev, sizeof(struct boom_rx_desc) * RX_RING_SIZE
+					   + sizeof(struct boom_tx_desc) * TX_RING_SIZE,
+					   &vp->rx_ring_dma, GFP_KERNEL);
+	retval = -ENOMEM;
+	if (!vp->rx_ring)
+		goto free_device;
+
+	vp->tx_ring = (struct boom_tx_desc *)(vp->rx_ring + RX_RING_SIZE);
+	vp->tx_ring_dma = vp->rx_ring_dma + sizeof(struct boom_rx_desc) * RX_RING_SIZE;
+
+	/* if we are a PCI driver, we store info in pdev->driver_data
+	 * instead of a module list */
+	if (pdev)
+		pci_set_drvdata(pdev, dev);
+	if (edev)
+		eisa_set_drvdata(edev, dev);
+
+	vp->media_override = 7;
+	if (option >= 0) {
+		vp->media_override = ((option & 7) == 2)  ?  0  :  option & 15;
+		if (vp->media_override != 7)
+			vp->medialock = 1;
+		vp->full_duplex = (option & 0x200) ? 1 : 0;
+		vp->bus_master = (option & 16) ? 1 : 0;
+	}
+
+	if (global_full_duplex > 0)
+		vp->full_duplex = 1;
+	if (global_enable_wol > 0)
+		vp->enable_wol = 1;
+
+	if (card_idx < MAX_UNITS) {
+		if (full_duplex[card_idx] > 0)
+			vp->full_duplex = 1;
+		if (flow_ctrl[card_idx] > 0)
+			vp->flow_ctrl = 1;
+		if (enable_wol[card_idx] > 0)
+			vp->enable_wol = 1;
+	}
+
+	vp->mii.force_media = vp->full_duplex;
+	vp->options = option;
+	/* Read the station address from the EEPROM. */
+	{
+		int base;
+
+		if (vci->drv_flags & EEPROM_8BIT)
+			base = 0x230;
+		else if (vci->drv_flags & EEPROM_OFFSET)
+			base = EEPROM_Read + 0x30;
+		else
+			base = EEPROM_Read;
+
+		for (i = 0; i < 0x40; i++) {
+			int timer;
+			window_write16(vp, base + i, 0, Wn0EepromCmd);
+			/* Pause for at least 162 us. for the read to take place. */
+			for (timer = 10; timer >= 0; timer--) {
+				udelay(162);
+				if ((window_read16(vp, 0, Wn0EepromCmd) &
+				     0x8000) == 0)
+					break;
+			}
+			eeprom[i] = window_read16(vp, 0, Wn0EepromData);
+		}
+	}
+	for (i = 0; i < 0x18; i++)
+		checksum ^= eeprom[i];
+	checksum = (checksum ^ (checksum >> 8)) & 0xff;
+	if (checksum != 0x00) {		/* Grrr, needless incompatible change 3Com. */
+		while (i < 0x21)
+			checksum ^= eeprom[i++];
+		checksum = (checksum ^ (checksum >> 8)) & 0xff;
+	}
+	if ((checksum != 0x00) && !(vci->drv_flags & IS_TORNADO))
+		pr_cont(" ***INVALID CHECKSUM %4.4x*** ", checksum);
+	for (i = 0; i < 3; i++)
+		addr[i] = htons(eeprom[i + 10]);
+	eth_hw_addr_set(dev, (u8 *)addr);
+	if (print_info)
+		pr_cont(" %pM", dev->dev_addr);
+	/* Unfortunately an all zero eeprom passes the checksum and this
+	   gets found in the wild in failure cases. Crypto is hard 8) */
+	if (!is_valid_ether_addr(dev->dev_addr)) {
+		retval = -EINVAL;
+		pr_err("*** EEPROM MAC address is invalid.\n");
+		goto free_ring;	/* With every pack */
+	}
+	for (i = 0; i < 6; i++)
+		window_write8(vp, dev->dev_addr[i], 2, i);
+
+	if (print_info)
+		pr_cont(", IRQ %d\n", dev->irq);
+	/* Tell them about an invalid IRQ. */
+	if (dev->irq <= 0 || dev->irq >= nr_irqs)
+		pr_warn(" *** Warning: IRQ %d is unlikely to work! ***\n",
+			dev->irq);
+
+	step = (window_read8(vp, 4, Wn4_NetDiag) & 0x1e) >> 1;
+	if (print_info) {
+		pr_info("  product code %02x%02x rev %02x.%d date %02d-%02d-%02d\n",
+			eeprom[6]&0xff, eeprom[6]>>8, eeprom[0x14],
+			step, (eeprom[4]>>5) & 15, eeprom[4] & 31, eeprom[4]>>9);
+	}
+
+
+	if (pdev && vci->drv_flags & HAS_CB_FNS) {
+		unsigned short n;
+
+		vp->cb_fn_base = pci_iomap(pdev, 2, 0);
+		if (!vp->cb_fn_base) {
+			retval = -ENOMEM;
+			goto free_ring;
+		}
+
+		if (print_info) {
+			pr_info("%s: CardBus functions mapped %16.16llx->%p\n",
+				print_name,
+				(unsigned long long)pci_resource_start(pdev, 2),
+				vp->cb_fn_base);
+		}
+
+		n = window_read16(vp, 2, Wn2_ResetOptions) & ~0x4010;
+		if (vp->drv_flags & INVERT_LED_PWR)
+			n |= 0x10;
+		if (vp->drv_flags & INVERT_MII_PWR)
+			n |= 0x4000;
+		window_write16(vp, n, 2, Wn2_ResetOptions);
+		if (vp->drv_flags & WNO_XCVR_PWR) {
+			window_write16(vp, 0x0800, 0, 0);
+		}
+	}
+
+	/* Extract our information from the EEPROM data. */
+	vp->info1 = eeprom[13];
+	vp->info2 = eeprom[15];
+	vp->capabilities = eeprom[16];
+
+	if (vp->info1 & 0x8000) {
+		vp->full_duplex = 1;
+		if (print_info)
+			pr_info("Full duplex capable\n");
+	}
+
+	{
+		static const char * const ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
+		unsigned int config;
+		vp->available_media = window_read16(vp, 3, Wn3_Options);
+		if ((vp->available_media & 0xff) == 0)		/* Broken 3c916 */
+			vp->available_media = 0x40;
+		config = window_read32(vp, 3, Wn3_Config);
+		if (print_info) {
+			pr_debug("  Internal config register is %4.4x, transceivers %#x.\n",
+				config, window_read16(vp, 3, Wn3_Options));
+			pr_info("  %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
+				   8 << RAM_SIZE(config),
+				   RAM_WIDTH(config) ? "word" : "byte",
+				   ram_split[RAM_SPLIT(config)],
+				   AUTOSELECT(config) ? "autoselect/" : "",
+				   XCVR(config) > XCVR_ExtMII ? "<invalid transceiver>" :
+				   media_tbl[XCVR(config)].name);
+		}
+		vp->default_media = XCVR(config);
+		if (vp->default_media == XCVR_NWAY)
+			vp->has_nway = 1;
+		vp->autoselect = AUTOSELECT(config);
+	}
+
+	if (vp->media_override != 7) {
+		pr_info("%s:  Media override to transceiver type %d (%s).\n",
+				print_name, vp->media_override,
+				media_tbl[vp->media_override].name);
+		dev->if_port = vp->media_override;
+	} else
+		dev->if_port = vp->default_media;
+
+	if ((vp->available_media & 0x40) || (vci->drv_flags & HAS_NWAY) ||
+		dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) {
+		int phy, phy_idx = 0;
+		mii_preamble_required++;
+		if (vp->drv_flags & EXTRA_PREAMBLE)
+			mii_preamble_required++;
+		mdio_sync(vp, 32);
+		mdio_read(dev, 24, MII_BMSR);
+		for (phy = 0; phy < 32 && phy_idx < 1; phy++) {
+			int mii_status, phyx;
+
+			/*
+			 * For the 3c905CX we look at index 24 first, because it bogusly
+			 * reports an external PHY at all indices
+			 */
+			if (phy == 0)
+				phyx = 24;
+			else if (phy <= 24)
+				phyx = phy - 1;
+			else
+				phyx = phy;
+			mii_status = mdio_read(dev, phyx, MII_BMSR);
+			if (mii_status  &&  mii_status != 0xffff) {
+				vp->phys[phy_idx++] = phyx;
+				if (print_info) {
+					pr_info("  MII transceiver found at address %d, status %4x.\n",
+						phyx, mii_status);
+				}
+				if ((mii_status & 0x0040) == 0)
+					mii_preamble_required++;
+			}
+		}
+		mii_preamble_required--;
+		if (phy_idx == 0) {
+			pr_warn("  ***WARNING*** No MII transceivers found!\n");
+			vp->phys[0] = 24;
+		} else {
+			vp->advertising = mdio_read(dev, vp->phys[0], MII_ADVERTISE);
+			if (vp->full_duplex) {
+				/* Only advertise the FD media types. */
+				vp->advertising &= ~0x02A0;
+				mdio_write(dev, vp->phys[0], 4, vp->advertising);
+			}
+		}
+		vp->mii.phy_id = vp->phys[0];
+	}
+
+	if (vp->capabilities & CapBusMaster) {
+		vp->full_bus_master_tx = 1;
+		if (print_info) {
+			pr_info("  Enabling bus-master transmits and %s receives.\n",
+			(vp->info2 & 1) ? "early" : "whole-frame" );
+		}
+		vp->full_bus_master_rx = (vp->info2 & 1) ? 1 : 2;
+		vp->bus_master = 0;		/* AKPM: vortex only */
+	}
+
+	/* The 3c59x-specific entries in the device structure. */
+	if (vp->full_bus_master_tx) {
+		dev->netdev_ops = &boomrang_netdev_ops;
+		/* Actually, it still should work with iommu. */
+		if (card_idx < MAX_UNITS &&
+		    ((hw_checksums[card_idx] == -1 && (vp->drv_flags & HAS_HWCKSM)) ||
+				hw_checksums[card_idx] == 1)) {
+			dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
+		}
+	} else
+		dev->netdev_ops =  &vortex_netdev_ops;
+
+	if (print_info) {
+		pr_info("%s: scatter/gather %sabled. h/w checksums %sabled\n",
+				print_name,
+				(dev->features & NETIF_F_SG) ? "en":"dis",
+				(dev->features & NETIF_F_IP_CSUM) ? "en":"dis");
+	}
+
+	dev->ethtool_ops = &vortex_ethtool_ops;
+	dev->watchdog_timeo = (watchdog * HZ) / 1000;
+
+	if (pdev) {
+		vp->pm_state_valid = 1;
+		pci_save_state(pdev);
+		acpi_set_WOL(dev);
+	}
+	retval = register_netdev(dev);
+	if (retval == 0)
+		return 0;
+
+free_ring:
+	dma_free_coherent(&pdev->dev,
+		sizeof(struct boom_rx_desc) * RX_RING_SIZE +
+		sizeof(struct boom_tx_desc) * TX_RING_SIZE,
+		vp->rx_ring, vp->rx_ring_dma);
+free_device:
+	free_netdev(dev);
+	pr_err(PFX "vortex_probe1 fails.  Returns %d\n", retval);
+out:
+	return retval;
+}
+
+static void
+issue_and_wait(struct net_device *dev, int cmd)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+	int i;
+
+	iowrite16(cmd, ioaddr + EL3_CMD);
+	for (i = 0; i < 2000; i++) {
+		if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress))
+			return;
+	}
+
+	/* OK, that didn't work.  Do it the slow way.  One second */
+	for (i = 0; i < 100000; i++) {
+		if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress)) {
+			if (vortex_debug > 1)
+				pr_info("%s: command 0x%04x took %d usecs\n",
+					   dev->name, cmd, i * 10);
+			return;
+		}
+		udelay(10);
+	}
+	pr_err("%s: command 0x%04x did not complete! Status=0x%x\n",
+			   dev->name, cmd, ioread16(ioaddr + EL3_STATUS));
+}
+
+static void
+vortex_set_duplex(struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+
+	pr_info("%s:  setting %s-duplex.\n",
+		dev->name, (vp->full_duplex) ? "full" : "half");
+
+	/* Set the full-duplex bit. */
+	window_write16(vp,
+		       ((vp->info1 & 0x8000) || vp->full_duplex ? 0x20 : 0) |
+		       (vp->large_frames ? 0x40 : 0) |
+		       ((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ?
+			0x100 : 0),
+		       3, Wn3_MAC_Ctrl);
+}
+
+static void vortex_check_media(struct net_device *dev, unsigned int init)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	unsigned int ok_to_print = 0;
+
+	if (vortex_debug > 3)
+		ok_to_print = 1;
+
+	if (mii_check_media(&vp->mii, ok_to_print, init)) {
+		vp->full_duplex = vp->mii.full_duplex;
+		vortex_set_duplex(dev);
+	} else if (init) {
+		vortex_set_duplex(dev);
+	}
+}
+
+static int
+vortex_up(struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+	unsigned int config;
+	int i, mii_reg5, err = 0;
+
+	if (VORTEX_PCI(vp)) {
+		pci_set_power_state(VORTEX_PCI(vp), PCI_D0);	/* Go active */
+		if (vp->pm_state_valid)
+			pci_restore_state(VORTEX_PCI(vp));
+		err = pci_enable_device(VORTEX_PCI(vp));
+		if (err) {
+			pr_warn("%s: Could not enable device\n", dev->name);
+			goto err_out;
+		}
+	}
+
+	/* Before initializing select the active media port. */
+	config = window_read32(vp, 3, Wn3_Config);
+
+	if (vp->media_override != 7) {
+		pr_info("%s: Media override to transceiver %d (%s).\n",
+			   dev->name, vp->media_override,
+			   media_tbl[vp->media_override].name);
+		dev->if_port = vp->media_override;
+	} else if (vp->autoselect) {
+		if (vp->has_nway) {
+			if (vortex_debug > 1)
+				pr_info("%s: using NWAY device table, not %d\n",
+								dev->name, dev->if_port);
+			dev->if_port = XCVR_NWAY;
+		} else {
+			/* Find first available media type, starting with 100baseTx. */
+			dev->if_port = XCVR_100baseTx;
+			while (! (vp->available_media & media_tbl[dev->if_port].mask))
+				dev->if_port = media_tbl[dev->if_port].next;
+			if (vortex_debug > 1)
+				pr_info("%s: first available media type: %s\n",
+					dev->name, media_tbl[dev->if_port].name);
+		}
+	} else {
+		dev->if_port = vp->default_media;
+		if (vortex_debug > 1)
+			pr_info("%s: using default media %s\n",
+				dev->name, media_tbl[dev->if_port].name);
+	}
+
+	timer_setup(&vp->timer, vortex_timer, 0);
+	mod_timer(&vp->timer, RUN_AT(media_tbl[dev->if_port].wait));
+
+	if (vortex_debug > 1)
+		pr_debug("%s: Initial media type %s.\n",
+			   dev->name, media_tbl[dev->if_port].name);
+
+	vp->full_duplex = vp->mii.force_media;
+	config = BFINS(config, dev->if_port, 20, 4);
+	if (vortex_debug > 6)
+		pr_debug("vortex_up(): writing 0x%x to InternalConfig\n", config);
+	window_write32(vp, config, 3, Wn3_Config);
+
+	if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) {
+		mdio_read(dev, vp->phys[0], MII_BMSR);
+		mii_reg5 = mdio_read(dev, vp->phys[0], MII_LPA);
+		vp->partner_flow_ctrl = ((mii_reg5 & 0x0400) != 0);
+		vp->mii.full_duplex = vp->full_duplex;
+
+		vortex_check_media(dev, 1);
+	}
+	else
+		vortex_set_duplex(dev);
+
+	issue_and_wait(dev, TxReset);
+	/*
+	 * Don't reset the PHY - that upsets autonegotiation during DHCP operations.
+	 */
+	issue_and_wait(dev, RxReset|0x04);
+
+
+	iowrite16(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
+
+	if (vortex_debug > 1) {
+		pr_debug("%s: vortex_up() irq %d media status %4.4x.\n",
+			   dev->name, dev->irq, window_read16(vp, 4, Wn4_Media));
+	}
+
+	/* Set the station address and mask in window 2 each time opened. */
+	for (i = 0; i < 6; i++)
+		window_write8(vp, dev->dev_addr[i], 2, i);
+	for (; i < 12; i+=2)
+		window_write16(vp, 0, 2, i);
+
+	if (vp->cb_fn_base) {
+		unsigned short n = window_read16(vp, 2, Wn2_ResetOptions) & ~0x4010;
+		if (vp->drv_flags & INVERT_LED_PWR)
+			n |= 0x10;
+		if (vp->drv_flags & INVERT_MII_PWR)
+			n |= 0x4000;
+		window_write16(vp, n, 2, Wn2_ResetOptions);
+	}
+
+	if (dev->if_port == XCVR_10base2)
+		/* Start the thinnet transceiver. We should really wait 50ms...*/
+		iowrite16(StartCoax, ioaddr + EL3_CMD);
+	if (dev->if_port != XCVR_NWAY) {
+		window_write16(vp,
+			       (window_read16(vp, 4, Wn4_Media) &
+				~(Media_10TP|Media_SQE)) |
+			       media_tbl[dev->if_port].media_bits,
+			       4, Wn4_Media);
+	}
+
+	/* Switch to the stats window, and clear all stats by reading. */
+	iowrite16(StatsDisable, ioaddr + EL3_CMD);
+	for (i = 0; i < 10; i++)
+		window_read8(vp, 6, i);
+	window_read16(vp, 6, 10);
+	window_read16(vp, 6, 12);
+	/* New: On the Vortex we must also clear the BadSSD counter. */
+	window_read8(vp, 4, 12);
+	/* ..and on the Boomerang we enable the extra statistics bits. */
+	window_write16(vp, 0x0040, 4, Wn4_NetDiag);
+
+	if (vp->full_bus_master_rx) { /* Boomerang bus master. */
+		vp->cur_rx = 0;
+		/* Initialize the RxEarly register as recommended. */
+		iowrite16(SetRxThreshold + (1536>>2), ioaddr + EL3_CMD);
+		iowrite32(0x0020, ioaddr + PktStatus);
+		iowrite32(vp->rx_ring_dma, ioaddr + UpListPtr);
+	}
+	if (vp->full_bus_master_tx) { 		/* Boomerang bus master Tx. */
+		vp->cur_tx = vp->dirty_tx = 0;
+		if (vp->drv_flags & IS_BOOMERANG)
+			iowrite8(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold); /* Room for a packet. */
+		/* Clear the Rx, Tx rings. */
+		for (i = 0; i < RX_RING_SIZE; i++)	/* AKPM: this is done in vortex_open, too */
+			vp->rx_ring[i].status = 0;
+		for (i = 0; i < TX_RING_SIZE; i++)
+			vp->tx_skbuff[i] = NULL;
+		iowrite32(0, ioaddr + DownListPtr);
+	}
+	/* Set receiver mode: presumably accept b-case and phys addr only. */
+	set_rx_mode(dev);
+	/* enable 802.1q tagged frames */
+	set_8021q_mode(dev, 1);
+	iowrite16(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
+
+	iowrite16(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
+	iowrite16(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
+	/* Allow status bits to be seen. */
+	vp->status_enable = SetStatusEnb | HostError|IntReq|StatsFull|TxComplete|
+		(vp->full_bus_master_tx ? DownComplete : TxAvailable) |
+		(vp->full_bus_master_rx ? UpComplete : RxComplete) |
+		(vp->bus_master ? DMADone : 0);
+	vp->intr_enable = SetIntrEnb | IntLatch | TxAvailable |
+		(vp->full_bus_master_rx ? 0 : RxComplete) |
+		StatsFull | HostError | TxComplete | IntReq
+		| (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete;
+	iowrite16(vp->status_enable, ioaddr + EL3_CMD);
+	/* Ack all pending events, and set active indicator mask. */
+	iowrite16(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
+		 ioaddr + EL3_CMD);
+	iowrite16(vp->intr_enable, ioaddr + EL3_CMD);
+	if (vp->cb_fn_base)			/* The PCMCIA people are idiots.  */
+		iowrite32(0x8000, vp->cb_fn_base + 4);
+	netif_start_queue (dev);
+	netdev_reset_queue(dev);
+err_out:
+	return err;
+}
+
+static int
+vortex_open(struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	int i;
+	int retval;
+	dma_addr_t dma;
+
+	/* Use the now-standard shared IRQ implementation. */
+	if ((retval = request_irq(dev->irq, vortex_boomerang_interrupt, IRQF_SHARED, dev->name, dev))) {
+		pr_err("%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
+		goto err;
+	}
+
+	if (vp->full_bus_master_rx) { /* Boomerang bus master. */
+		if (vortex_debug > 2)
+			pr_debug("%s:  Filling in the Rx ring.\n", dev->name);
+		for (i = 0; i < RX_RING_SIZE; i++) {
+			struct sk_buff *skb;
+			vp->rx_ring[i].next = cpu_to_le32(vp->rx_ring_dma + sizeof(struct boom_rx_desc) * (i+1));
+			vp->rx_ring[i].status = 0;	/* Clear complete bit. */
+			vp->rx_ring[i].length = cpu_to_le32(PKT_BUF_SZ | LAST_FRAG);
+
+			skb = __netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN,
+						 GFP_KERNEL);
+			vp->rx_skbuff[i] = skb;
+			if (skb == NULL)
+				break;			/* Bad news!  */
+
+			skb_reserve(skb, NET_IP_ALIGN);	/* Align IP on 16 byte boundaries */
+			dma = dma_map_single(vp->gendev, skb->data,
+					     PKT_BUF_SZ, DMA_FROM_DEVICE);
+			if (dma_mapping_error(vp->gendev, dma))
+				break;
+			vp->rx_ring[i].addr = cpu_to_le32(dma);
+		}
+		if (i != RX_RING_SIZE) {
+			pr_emerg("%s: no memory for rx ring\n", dev->name);
+			retval = -ENOMEM;
+			goto err_free_skb;
+		}
+		/* Wrap the ring. */
+		vp->rx_ring[i-1].next = cpu_to_le32(vp->rx_ring_dma);
+	}
+
+	retval = vortex_up(dev);
+	if (!retval)
+		goto out;
+
+err_free_skb:
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		if (vp->rx_skbuff[i]) {
+			dev_kfree_skb(vp->rx_skbuff[i]);
+			vp->rx_skbuff[i] = NULL;
+		}
+	}
+	free_irq(dev->irq, dev);
+err:
+	if (vortex_debug > 1)
+		pr_err("%s: vortex_open() fails: returning %d\n", dev->name, retval);
+out:
+	return retval;
+}
+
+static void
+vortex_timer(struct timer_list *t)
+{
+	struct vortex_private *vp = from_timer(vp, t, timer);
+	struct net_device *dev = vp->mii.dev;
+	void __iomem *ioaddr = vp->ioaddr;
+	int next_tick = 60*HZ;
+	int ok = 0;
+	int media_status;
+
+	if (vortex_debug > 2) {
+		pr_debug("%s: Media selection timer tick happened, %s.\n",
+			   dev->name, media_tbl[dev->if_port].name);
+		pr_debug("dev->watchdog_timeo=%d\n", dev->watchdog_timeo);
+	}
+
+	media_status = window_read16(vp, 4, Wn4_Media);
+	switch (dev->if_port) {
+	case XCVR_10baseT:  case XCVR_100baseTx:  case XCVR_100baseFx:
+		if (media_status & Media_LnkBeat) {
+			netif_carrier_on(dev);
+			ok = 1;
+			if (vortex_debug > 1)
+				pr_debug("%s: Media %s has link beat, %x.\n",
+					   dev->name, media_tbl[dev->if_port].name, media_status);
+		} else {
+			netif_carrier_off(dev);
+			if (vortex_debug > 1) {
+				pr_debug("%s: Media %s has no link beat, %x.\n",
+					   dev->name, media_tbl[dev->if_port].name, media_status);
+			}
+		}
+		break;
+	case XCVR_MII: case XCVR_NWAY:
+		{
+			ok = 1;
+			vortex_check_media(dev, 0);
+		}
+		break;
+	  default:					/* Other media types handled by Tx timeouts. */
+		if (vortex_debug > 1)
+		  pr_debug("%s: Media %s has no indication, %x.\n",
+				 dev->name, media_tbl[dev->if_port].name, media_status);
+		ok = 1;
+	}
+
+	if (dev->flags & IFF_SLAVE || !netif_carrier_ok(dev))
+		next_tick = 5*HZ;
+
+	if (vp->medialock)
+		goto leave_media_alone;
+
+	if (!ok) {
+		unsigned int config;
+
+		spin_lock_irq(&vp->lock);
+
+		do {
+			dev->if_port = media_tbl[dev->if_port].next;
+		} while ( ! (vp->available_media & media_tbl[dev->if_port].mask));
+		if (dev->if_port == XCVR_Default) { /* Go back to default. */
+		  dev->if_port = vp->default_media;
+		  if (vortex_debug > 1)
+			pr_debug("%s: Media selection failing, using default %s port.\n",
+				   dev->name, media_tbl[dev->if_port].name);
+		} else {
+			if (vortex_debug > 1)
+				pr_debug("%s: Media selection failed, now trying %s port.\n",
+					   dev->name, media_tbl[dev->if_port].name);
+			next_tick = media_tbl[dev->if_port].wait;
+		}
+		window_write16(vp,
+			       (media_status & ~(Media_10TP|Media_SQE)) |
+			       media_tbl[dev->if_port].media_bits,
+			       4, Wn4_Media);
+
+		config = window_read32(vp, 3, Wn3_Config);
+		config = BFINS(config, dev->if_port, 20, 4);
+		window_write32(vp, config, 3, Wn3_Config);
+
+		iowrite16(dev->if_port == XCVR_10base2 ? StartCoax : StopCoax,
+			 ioaddr + EL3_CMD);
+		if (vortex_debug > 1)
+			pr_debug("wrote 0x%08x to Wn3_Config\n", config);
+		/* AKPM: FIXME: Should reset Rx & Tx here.  P60 of 3c90xc.pdf */
+
+		spin_unlock_irq(&vp->lock);
+	}
+
+leave_media_alone:
+	if (vortex_debug > 2)
+	  pr_debug("%s: Media selection timer finished, %s.\n",
+			 dev->name, media_tbl[dev->if_port].name);
+
+	mod_timer(&vp->timer, RUN_AT(next_tick));
+	if (vp->deferred)
+		iowrite16(FakeIntr, ioaddr + EL3_CMD);
+}
+
+static void vortex_tx_timeout(struct net_device *dev, unsigned int txqueue)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+
+	pr_err("%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
+		   dev->name, ioread8(ioaddr + TxStatus),
+		   ioread16(ioaddr + EL3_STATUS));
+	pr_err("  diagnostics: net %04x media %04x dma %08x fifo %04x\n",
+			window_read16(vp, 4, Wn4_NetDiag),
+			window_read16(vp, 4, Wn4_Media),
+			ioread32(ioaddr + PktStatus),
+			window_read16(vp, 4, Wn4_FIFODiag));
+	/* Slight code bloat to be user friendly. */
+	if ((ioread8(ioaddr + TxStatus) & 0x88) == 0x88)
+		pr_err("%s: Transmitter encountered 16 collisions --"
+			   " network cable problem?\n", dev->name);
+	if (ioread16(ioaddr + EL3_STATUS) & IntLatch) {
+		pr_err("%s: Interrupt posted but not delivered --"
+			   " IRQ blocked by another device?\n", dev->name);
+		/* Bad idea here.. but we might as well handle a few events. */
+		vortex_boomerang_interrupt(dev->irq, dev);
+	}
+
+	if (vortex_debug > 0)
+		dump_tx_ring(dev);
+
+	issue_and_wait(dev, TxReset);
+
+	dev->stats.tx_errors++;
+	if (vp->full_bus_master_tx) {
+		pr_debug("%s: Resetting the Tx ring pointer.\n", dev->name);
+		if (vp->cur_tx - vp->dirty_tx > 0  &&  ioread32(ioaddr + DownListPtr) == 0)
+			iowrite32(vp->tx_ring_dma + (vp->dirty_tx % TX_RING_SIZE) * sizeof(struct boom_tx_desc),
+				 ioaddr + DownListPtr);
+		if (vp->cur_tx - vp->dirty_tx < TX_RING_SIZE) {
+			netif_wake_queue (dev);
+			netdev_reset_queue (dev);
+		}
+		if (vp->drv_flags & IS_BOOMERANG)
+			iowrite8(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold);
+		iowrite16(DownUnstall, ioaddr + EL3_CMD);
+	} else {
+		dev->stats.tx_dropped++;
+		netif_wake_queue(dev);
+		netdev_reset_queue(dev);
+	}
+	/* Issue Tx Enable */
+	iowrite16(TxEnable, ioaddr + EL3_CMD);
+	netif_trans_update(dev); /* prevent tx timeout */
+}
+
+/*
+ * Handle uncommon interrupt sources.  This is a separate routine to minimize
+ * the cache impact.
+ */
+static void
+vortex_error(struct net_device *dev, int status)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+	int do_tx_reset = 0, reset_mask = 0;
+	unsigned char tx_status = 0;
+
+	if (vortex_debug > 2) {
+		pr_err("%s: vortex_error(), status=0x%x\n", dev->name, status);
+	}
+
+	if (status & TxComplete) {			/* Really "TxError" for us. */
+		tx_status = ioread8(ioaddr + TxStatus);
+		/* Presumably a tx-timeout. We must merely re-enable. */
+		if (vortex_debug > 2 ||
+		    (tx_status != 0x88 && vortex_debug > 0)) {
+			pr_err("%s: Transmit error, Tx status register %2.2x.\n",
+				   dev->name, tx_status);
+			if (tx_status == 0x82) {
+				pr_err("Probably a duplex mismatch.  See "
+						"Documentation/networking/device_drivers/ethernet/3com/vortex.rst\n");
+			}
+			dump_tx_ring(dev);
+		}
+		if (tx_status & 0x14)  dev->stats.tx_fifo_errors++;
+		if (tx_status & 0x38)  dev->stats.tx_aborted_errors++;
+		if (tx_status & 0x08)  vp->xstats.tx_max_collisions++;
+		iowrite8(0, ioaddr + TxStatus);
+		if (tx_status & 0x30) {			/* txJabber or txUnderrun */
+			do_tx_reset = 1;
+		} else if ((tx_status & 0x08) && (vp->drv_flags & MAX_COLLISION_RESET))  {	/* maxCollisions */
+			do_tx_reset = 1;
+			reset_mask = 0x0108;		/* Reset interface logic, but not download logic */
+		} else {				/* Merely re-enable the transmitter. */
+			iowrite16(TxEnable, ioaddr + EL3_CMD);
+		}
+	}
+
+	if (status & RxEarly)				/* Rx early is unused. */
+		iowrite16(AckIntr | RxEarly, ioaddr + EL3_CMD);
+
+	if (status & StatsFull) {			/* Empty statistics. */
+		static int DoneDidThat;
+		if (vortex_debug > 4)
+			pr_debug("%s: Updating stats.\n", dev->name);
+		update_stats(ioaddr, dev);
+		/* HACK: Disable statistics as an interrupt source. */
+		/* This occurs when we have the wrong media type! */
+		if (DoneDidThat == 0  &&
+			ioread16(ioaddr + EL3_STATUS) & StatsFull) {
+			pr_warn("%s: Updating statistics failed, disabling stats as an interrupt source\n",
+				dev->name);
+			iowrite16(SetIntrEnb |
+				  (window_read16(vp, 5, 10) & ~StatsFull),
+				  ioaddr + EL3_CMD);
+			vp->intr_enable &= ~StatsFull;
+			DoneDidThat++;
+		}
+	}
+	if (status & IntReq) {		/* Restore all interrupt sources.  */
+		iowrite16(vp->status_enable, ioaddr + EL3_CMD);
+		iowrite16(vp->intr_enable, ioaddr + EL3_CMD);
+	}
+	if (status & HostError) {
+		u16 fifo_diag;
+		fifo_diag = window_read16(vp, 4, Wn4_FIFODiag);
+		pr_err("%s: Host error, FIFO diagnostic register %4.4x.\n",
+			   dev->name, fifo_diag);
+		/* Adapter failure requires Tx/Rx reset and reinit. */
+		if (vp->full_bus_master_tx) {
+			int bus_status = ioread32(ioaddr + PktStatus);
+			/* 0x80000000 PCI master abort. */
+			/* 0x40000000 PCI target abort. */
+			if (vortex_debug)
+				pr_err("%s: PCI bus error, bus status %8.8x\n", dev->name, bus_status);
+
+			/* In this case, blow the card away */
+			/* Must not enter D3 or we can't legally issue the reset! */
+			vortex_down(dev, 0);
+			issue_and_wait(dev, TotalReset | 0xff);
+			vortex_up(dev);		/* AKPM: bug.  vortex_up() assumes that the rx ring is full. It may not be. */
+		} else if (fifo_diag & 0x0400)
+			do_tx_reset = 1;
+		if (fifo_diag & 0x3000) {
+			/* Reset Rx fifo and upload logic */
+			issue_and_wait(dev, RxReset|0x07);
+			/* Set the Rx filter to the current state. */
+			set_rx_mode(dev);
+			/* enable 802.1q VLAN tagged frames */
+			set_8021q_mode(dev, 1);
+			iowrite16(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */
+			iowrite16(AckIntr | HostError, ioaddr + EL3_CMD);
+		}
+	}
+
+	if (do_tx_reset) {
+		issue_and_wait(dev, TxReset|reset_mask);
+		iowrite16(TxEnable, ioaddr + EL3_CMD);
+		if (!vp->full_bus_master_tx)
+			netif_wake_queue(dev);
+	}
+}
+
+static netdev_tx_t
+vortex_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+	int skblen = skb->len;
+
+	/* Put out the doubleword header... */
+	iowrite32(skb->len, ioaddr + TX_FIFO);
+	if (vp->bus_master) {
+		/* Set the bus-master controller to transfer the packet. */
+		int len = (skb->len + 3) & ~3;
+		vp->tx_skb_dma = dma_map_single(vp->gendev, skb->data, len,
+						DMA_TO_DEVICE);
+		if (dma_mapping_error(vp->gendev, vp->tx_skb_dma)) {
+			dev_kfree_skb_any(skb);
+			dev->stats.tx_dropped++;
+			return NETDEV_TX_OK;
+		}
+
+		spin_lock_irq(&vp->window_lock);
+		window_set(vp, 7);
+		iowrite32(vp->tx_skb_dma, ioaddr + Wn7_MasterAddr);
+		iowrite16(len, ioaddr + Wn7_MasterLen);
+		spin_unlock_irq(&vp->window_lock);
+		vp->tx_skb = skb;
+		skb_tx_timestamp(skb);
+		iowrite16(StartDMADown, ioaddr + EL3_CMD);
+		/* netif_wake_queue() will be called at the DMADone interrupt. */
+	} else {
+		/* ... and the packet rounded to a doubleword. */
+		skb_tx_timestamp(skb);
+		iowrite32_rep(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
+		dev_consume_skb_any (skb);
+		if (ioread16(ioaddr + TxFree) > 1536) {
+			netif_start_queue (dev);	/* AKPM: redundant? */
+		} else {
+			/* Interrupt us when the FIFO has room for max-sized packet. */
+			netif_stop_queue(dev);
+			iowrite16(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD);
+		}
+	}
+
+	netdev_sent_queue(dev, skblen);
+
+	/* Clear the Tx status stack. */
+	{
+		int tx_status;
+		int i = 32;
+
+		while (--i > 0	&&	(tx_status = ioread8(ioaddr + TxStatus)) > 0) {
+			if (tx_status & 0x3C) {		/* A Tx-disabling error occurred.  */
+				if (vortex_debug > 2)
+				  pr_debug("%s: Tx error, status %2.2x.\n",
+						 dev->name, tx_status);
+				if (tx_status & 0x04) dev->stats.tx_fifo_errors++;
+				if (tx_status & 0x38) dev->stats.tx_aborted_errors++;
+				if (tx_status & 0x30) {
+					issue_and_wait(dev, TxReset);
+				}
+				iowrite16(TxEnable, ioaddr + EL3_CMD);
+			}
+			iowrite8(0x00, ioaddr + TxStatus); /* Pop the status stack. */
+		}
+	}
+	return NETDEV_TX_OK;
+}
+
+static netdev_tx_t
+boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+	/* Calculate the next Tx descriptor entry. */
+	int entry = vp->cur_tx % TX_RING_SIZE;
+	int skblen = skb->len;
+	struct boom_tx_desc *prev_entry = &vp->tx_ring[(vp->cur_tx-1) % TX_RING_SIZE];
+	unsigned long flags;
+	dma_addr_t dma_addr;
+
+	if (vortex_debug > 6) {
+		pr_debug("boomerang_start_xmit()\n");
+		pr_debug("%s: Trying to send a packet, Tx index %d.\n",
+			   dev->name, vp->cur_tx);
+	}
+
+	/*
+	 * We can't allow a recursion from our interrupt handler back into the
+	 * tx routine, as they take the same spin lock, and that causes
+	 * deadlock.  Just return NETDEV_TX_BUSY and let the stack try again in
+	 * a bit
+	 */
+	if (vp->handling_irq)
+		return NETDEV_TX_BUSY;
+
+	if (vp->cur_tx - vp->dirty_tx >= TX_RING_SIZE) {
+		if (vortex_debug > 0)
+			pr_warn("%s: BUG! Tx Ring full, refusing to send buffer\n",
+				dev->name);
+		netif_stop_queue(dev);
+		return NETDEV_TX_BUSY;
+	}
+
+	vp->tx_skbuff[entry] = skb;
+
+	vp->tx_ring[entry].next = 0;
+#if DO_ZEROCOPY
+	if (skb->ip_summed != CHECKSUM_PARTIAL)
+			vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded);
+	else
+			vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded | AddTCPChksum | AddUDPChksum);
+
+	if (!skb_shinfo(skb)->nr_frags) {
+		dma_addr = dma_map_single(vp->gendev, skb->data, skb->len,
+					  DMA_TO_DEVICE);
+		if (dma_mapping_error(vp->gendev, dma_addr))
+			goto out_dma_err;
+
+		vp->tx_ring[entry].frag[0].addr = cpu_to_le32(dma_addr);
+		vp->tx_ring[entry].frag[0].length = cpu_to_le32(skb->len | LAST_FRAG);
+	} else {
+		int i;
+
+		dma_addr = dma_map_single(vp->gendev, skb->data,
+					  skb_headlen(skb), DMA_TO_DEVICE);
+		if (dma_mapping_error(vp->gendev, dma_addr))
+			goto out_dma_err;
+
+		vp->tx_ring[entry].frag[0].addr = cpu_to_le32(dma_addr);
+		vp->tx_ring[entry].frag[0].length = cpu_to_le32(skb_headlen(skb));
+
+		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+			dma_addr = skb_frag_dma_map(vp->gendev, frag,
+						    0,
+						    skb_frag_size(frag),
+						    DMA_TO_DEVICE);
+			if (dma_mapping_error(vp->gendev, dma_addr)) {
+				for(i = i-1; i >= 0; i--)
+					dma_unmap_page(vp->gendev,
+						       le32_to_cpu(vp->tx_ring[entry].frag[i+1].addr),
+						       le32_to_cpu(vp->tx_ring[entry].frag[i+1].length),
+						       DMA_TO_DEVICE);
+
+				dma_unmap_single(vp->gendev,
+						 le32_to_cpu(vp->tx_ring[entry].frag[0].addr),
+						 le32_to_cpu(vp->tx_ring[entry].frag[0].length),
+						 DMA_TO_DEVICE);
+
+				goto out_dma_err;
+			}
+
+			vp->tx_ring[entry].frag[i+1].addr =
+						cpu_to_le32(dma_addr);
+
+			if (i == skb_shinfo(skb)->nr_frags-1)
+					vp->tx_ring[entry].frag[i+1].length = cpu_to_le32(skb_frag_size(frag)|LAST_FRAG);
+			else
+					vp->tx_ring[entry].frag[i+1].length = cpu_to_le32(skb_frag_size(frag));
+		}
+	}
+#else
+	dma_addr = dma_map_single(vp->gendev, skb->data, skb->len, DMA_TO_DEVICE);
+	if (dma_mapping_error(vp->gendev, dma_addr))
+		goto out_dma_err;
+	vp->tx_ring[entry].addr = cpu_to_le32(dma_addr);
+	vp->tx_ring[entry].length = cpu_to_le32(skb->len | LAST_FRAG);
+	vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded);
+#endif
+
+	spin_lock_irqsave(&vp->lock, flags);
+	/* Wait for the stall to complete. */
+	issue_and_wait(dev, DownStall);
+	prev_entry->next = cpu_to_le32(vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc));
+	if (ioread32(ioaddr + DownListPtr) == 0) {
+		iowrite32(vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc), ioaddr + DownListPtr);
+		vp->queued_packet++;
+	}
+
+	vp->cur_tx++;
+	netdev_sent_queue(dev, skblen);
+
+	if (vp->cur_tx - vp->dirty_tx > TX_RING_SIZE - 1) {
+		netif_stop_queue (dev);
+	} else {					/* Clear previous interrupt enable. */
+#if defined(tx_interrupt_mitigation)
+		/* Dubious. If in boomeang_interrupt "faster" cyclone ifdef
+		 * were selected, this would corrupt DN_COMPLETE. No?
+		 */
+		prev_entry->status &= cpu_to_le32(~TxIntrUploaded);
+#endif
+	}
+	skb_tx_timestamp(skb);
+	iowrite16(DownUnstall, ioaddr + EL3_CMD);
+	spin_unlock_irqrestore(&vp->lock, flags);
+out:
+	return NETDEV_TX_OK;
+out_dma_err:
+	dev_err(vp->gendev, "Error mapping dma buffer\n");
+	goto out;
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+   after the Tx thread. */
+
+/*
+ * This is the ISR for the vortex series chips.
+ * full_bus_master_tx == 0 && full_bus_master_rx == 0
+ */
+
+static irqreturn_t
+_vortex_interrupt(int irq, struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr;
+	int status;
+	int work_done = max_interrupt_work;
+	int handled = 0;
+	unsigned int bytes_compl = 0, pkts_compl = 0;
+
+	ioaddr = vp->ioaddr;
+
+	status = ioread16(ioaddr + EL3_STATUS);
+
+	if (vortex_debug > 6)
+		pr_debug("vortex_interrupt(). status=0x%4x\n", status);
+
+	if ((status & IntLatch) == 0)
+		goto handler_exit;		/* No interrupt: shared IRQs cause this */
+	handled = 1;
+
+	if (status & IntReq) {
+		status |= vp->deferred;
+		vp->deferred = 0;
+	}
+
+	if (status == 0xffff)		/* h/w no longer present (hotplug)? */
+		goto handler_exit;
+
+	if (vortex_debug > 4)
+		pr_debug("%s: interrupt, status %4.4x, latency %d ticks.\n",
+			   dev->name, status, ioread8(ioaddr + Timer));
+
+	spin_lock(&vp->window_lock);
+	window_set(vp, 7);
+
+	do {
+		if (vortex_debug > 5)
+				pr_debug("%s: In interrupt loop, status %4.4x.\n",
+					   dev->name, status);
+		if (status & RxComplete)
+			vortex_rx(dev);
+
+		if (status & TxAvailable) {
+			if (vortex_debug > 5)
+				pr_debug("	TX room bit was handled.\n");
+			/* There's room in the FIFO for a full-sized packet. */
+			iowrite16(AckIntr | TxAvailable, ioaddr + EL3_CMD);
+			netif_wake_queue (dev);
+		}
+
+		if (status & DMADone) {
+			if (ioread16(ioaddr + Wn7_MasterStatus) & 0x1000) {
+				iowrite16(0x1000, ioaddr + Wn7_MasterStatus); /* Ack the event. */
+				dma_unmap_single(vp->gendev, vp->tx_skb_dma, (vp->tx_skb->len + 3) & ~3, DMA_TO_DEVICE);
+				pkts_compl++;
+				bytes_compl += vp->tx_skb->len;
+				dev_consume_skb_irq(vp->tx_skb); /* Release the transferred buffer */
+				if (ioread16(ioaddr + TxFree) > 1536) {
+					/*
+					 * AKPM: FIXME: I don't think we need this.  If the queue was stopped due to
+					 * insufficient FIFO room, the TxAvailable test will succeed and call
+					 * netif_wake_queue()
+					 */
+					netif_wake_queue(dev);
+				} else { /* Interrupt when FIFO has room for max-sized packet. */
+					iowrite16(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD);
+					netif_stop_queue(dev);
+				}
+			}
+		}
+		/* Check for all uncommon interrupts at once. */
+		if (status & (HostError | RxEarly | StatsFull | TxComplete | IntReq)) {
+			if (status == 0xffff)
+				break;
+			if (status & RxEarly)
+				vortex_rx(dev);
+			spin_unlock(&vp->window_lock);
+			vortex_error(dev, status);
+			spin_lock(&vp->window_lock);
+			window_set(vp, 7);
+		}
+
+		if (--work_done < 0) {
+			pr_warn("%s: Too much work in interrupt, status %4.4x\n",
+				dev->name, status);
+			/* Disable all pending interrupts. */
+			do {
+				vp->deferred |= status;
+				iowrite16(SetStatusEnb | (~vp->deferred & vp->status_enable),
+					 ioaddr + EL3_CMD);
+				iowrite16(AckIntr | (vp->deferred & 0x7ff), ioaddr + EL3_CMD);
+			} while ((status = ioread16(ioaddr + EL3_CMD)) & IntLatch);
+			/* The timer will reenable interrupts. */
+			mod_timer(&vp->timer, jiffies + 1*HZ);
+			break;
+		}
+		/* Acknowledge the IRQ. */
+		iowrite16(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
+	} while ((status = ioread16(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete));
+
+	netdev_completed_queue(dev, pkts_compl, bytes_compl);
+	spin_unlock(&vp->window_lock);
+
+	if (vortex_debug > 4)
+		pr_debug("%s: exiting interrupt, status %4.4x.\n",
+			   dev->name, status);
+handler_exit:
+	return IRQ_RETVAL(handled);
+}
+
+/*
+ * This is the ISR for the boomerang series chips.
+ * full_bus_master_tx == 1 && full_bus_master_rx == 1
+ */
+
+static irqreturn_t
+_boomerang_interrupt(int irq, struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr;
+	int status;
+	int work_done = max_interrupt_work;
+	int handled = 0;
+	unsigned int bytes_compl = 0, pkts_compl = 0;
+
+	ioaddr = vp->ioaddr;
+
+	vp->handling_irq = 1;
+
+	status = ioread16(ioaddr + EL3_STATUS);
+
+	if (vortex_debug > 6)
+		pr_debug("boomerang_interrupt. status=0x%4x\n", status);
+
+	if ((status & IntLatch) == 0)
+		goto handler_exit;		/* No interrupt: shared IRQs can cause this */
+	handled = 1;
+
+	if (status == 0xffff) {		/* h/w no longer present (hotplug)? */
+		if (vortex_debug > 1)
+			pr_debug("boomerang_interrupt(1): status = 0xffff\n");
+		goto handler_exit;
+	}
+
+	if (status & IntReq) {
+		status |= vp->deferred;
+		vp->deferred = 0;
+	}
+
+	if (vortex_debug > 4)
+		pr_debug("%s: interrupt, status %4.4x, latency %d ticks.\n",
+			   dev->name, status, ioread8(ioaddr + Timer));
+	do {
+		if (vortex_debug > 5)
+				pr_debug("%s: In interrupt loop, status %4.4x.\n",
+					   dev->name, status);
+		if (status & UpComplete) {
+			iowrite16(AckIntr | UpComplete, ioaddr + EL3_CMD);
+			if (vortex_debug > 5)
+				pr_debug("boomerang_interrupt->boomerang_rx\n");
+			boomerang_rx(dev);
+		}
+
+		if (status & DownComplete) {
+			unsigned int dirty_tx = vp->dirty_tx;
+
+			iowrite16(AckIntr | DownComplete, ioaddr + EL3_CMD);
+			while (vp->cur_tx - dirty_tx > 0) {
+				int entry = dirty_tx % TX_RING_SIZE;
+#if 1	/* AKPM: the latter is faster, but cyclone-only */
+				if (ioread32(ioaddr + DownListPtr) ==
+					vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc))
+					break;			/* It still hasn't been processed. */
+#else
+				if ((vp->tx_ring[entry].status & DN_COMPLETE) == 0)
+					break;			/* It still hasn't been processed. */
+#endif
+
+				if (vp->tx_skbuff[entry]) {
+					struct sk_buff *skb = vp->tx_skbuff[entry];
+#if DO_ZEROCOPY
+					int i;
+					dma_unmap_single(vp->gendev,
+							le32_to_cpu(vp->tx_ring[entry].frag[0].addr),
+							le32_to_cpu(vp->tx_ring[entry].frag[0].length)&0xFFF,
+							DMA_TO_DEVICE);
+
+					for (i=1; i<=skb_shinfo(skb)->nr_frags; i++)
+							dma_unmap_page(vp->gendev,
+											 le32_to_cpu(vp->tx_ring[entry].frag[i].addr),
+											 le32_to_cpu(vp->tx_ring[entry].frag[i].length)&0xFFF,
+											 DMA_TO_DEVICE);
+#else
+					dma_unmap_single(vp->gendev,
+						le32_to_cpu(vp->tx_ring[entry].addr), skb->len, DMA_TO_DEVICE);
+#endif
+					pkts_compl++;
+					bytes_compl += skb->len;
+					dev_consume_skb_irq(skb);
+					vp->tx_skbuff[entry] = NULL;
+				} else {
+					pr_debug("boomerang_interrupt: no skb!\n");
+				}
+				/* dev->stats.tx_packets++;  Counted below. */
+				dirty_tx++;
+			}
+			vp->dirty_tx = dirty_tx;
+			if (vp->cur_tx - dirty_tx <= TX_RING_SIZE - 1) {
+				if (vortex_debug > 6)
+					pr_debug("boomerang_interrupt: wake queue\n");
+				netif_wake_queue (dev);
+			}
+		}
+
+		/* Check for all uncommon interrupts at once. */
+		if (status & (HostError | RxEarly | StatsFull | TxComplete | IntReq))
+			vortex_error(dev, status);
+
+		if (--work_done < 0) {
+			pr_warn("%s: Too much work in interrupt, status %4.4x\n",
+				dev->name, status);
+			/* Disable all pending interrupts. */
+			do {
+				vp->deferred |= status;
+				iowrite16(SetStatusEnb | (~vp->deferred & vp->status_enable),
+					 ioaddr + EL3_CMD);
+				iowrite16(AckIntr | (vp->deferred & 0x7ff), ioaddr + EL3_CMD);
+			} while ((status = ioread16(ioaddr + EL3_CMD)) & IntLatch);
+			/* The timer will reenable interrupts. */
+			mod_timer(&vp->timer, jiffies + 1*HZ);
+			break;
+		}
+		/* Acknowledge the IRQ. */
+		iowrite16(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
+		if (vp->cb_fn_base)			/* The PCMCIA people are idiots.  */
+			iowrite32(0x8000, vp->cb_fn_base + 4);
+
+	} while ((status = ioread16(ioaddr + EL3_STATUS)) & IntLatch);
+	netdev_completed_queue(dev, pkts_compl, bytes_compl);
+
+	if (vortex_debug > 4)
+		pr_debug("%s: exiting interrupt, status %4.4x.\n",
+			   dev->name, status);
+handler_exit:
+	vp->handling_irq = 0;
+	return IRQ_RETVAL(handled);
+}
+
+static irqreturn_t
+vortex_boomerang_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct vortex_private *vp = netdev_priv(dev);
+	unsigned long flags;
+	irqreturn_t ret;
+
+	spin_lock_irqsave(&vp->lock, flags);
+
+	if (vp->full_bus_master_rx)
+		ret = _boomerang_interrupt(dev->irq, dev);
+	else
+		ret = _vortex_interrupt(dev->irq, dev);
+
+	spin_unlock_irqrestore(&vp->lock, flags);
+
+	return ret;
+}
+
+static int vortex_rx(struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+	int i;
+	short rx_status;
+
+	if (vortex_debug > 5)
+		pr_debug("vortex_rx(): status %4.4x, rx_status %4.4x.\n",
+			   ioread16(ioaddr+EL3_STATUS), ioread16(ioaddr+RxStatus));
+	while ((rx_status = ioread16(ioaddr + RxStatus)) > 0) {
+		if (rx_status & 0x4000) { /* Error, update stats. */
+			unsigned char rx_error = ioread8(ioaddr + RxErrors);
+			if (vortex_debug > 2)
+				pr_debug(" Rx error: status %2.2x.\n", rx_error);
+			dev->stats.rx_errors++;
+			if (rx_error & 0x01)  dev->stats.rx_over_errors++;
+			if (rx_error & 0x02)  dev->stats.rx_length_errors++;
+			if (rx_error & 0x04)  dev->stats.rx_frame_errors++;
+			if (rx_error & 0x08)  dev->stats.rx_crc_errors++;
+			if (rx_error & 0x10)  dev->stats.rx_length_errors++;
+		} else {
+			/* The packet length: up to 4.5K!. */
+			int pkt_len = rx_status & 0x1fff;
+			struct sk_buff *skb;
+
+			skb = netdev_alloc_skb(dev, pkt_len + 5);
+			if (vortex_debug > 4)
+				pr_debug("Receiving packet size %d status %4.4x.\n",
+					   pkt_len, rx_status);
+			if (skb != NULL) {
+				skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
+				/* 'skb_put()' points to the start of sk_buff data area. */
+				if (vp->bus_master &&
+					! (ioread16(ioaddr + Wn7_MasterStatus) & 0x8000)) {
+					dma_addr_t dma = dma_map_single(vp->gendev, skb_put(skb, pkt_len),
+									   pkt_len, DMA_FROM_DEVICE);
+					iowrite32(dma, ioaddr + Wn7_MasterAddr);
+					iowrite16((skb->len + 3) & ~3, ioaddr + Wn7_MasterLen);
+					iowrite16(StartDMAUp, ioaddr + EL3_CMD);
+					while (ioread16(ioaddr + Wn7_MasterStatus) & 0x8000)
+						;
+					dma_unmap_single(vp->gendev, dma, pkt_len, DMA_FROM_DEVICE);
+				} else {
+					ioread32_rep(ioaddr + RX_FIFO,
+					             skb_put(skb, pkt_len),
+						     (pkt_len + 3) >> 2);
+				}
+				iowrite16(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */
+				skb->protocol = eth_type_trans(skb, dev);
+				netif_rx(skb);
+				dev->stats.rx_packets++;
+				/* Wait a limited time to go to next packet. */
+				for (i = 200; i >= 0; i--)
+					if ( ! (ioread16(ioaddr + EL3_STATUS) & CmdInProgress))
+						break;
+				continue;
+			} else if (vortex_debug > 0)
+				pr_notice("%s: No memory to allocate a sk_buff of size %d.\n",
+					dev->name, pkt_len);
+			dev->stats.rx_dropped++;
+		}
+		issue_and_wait(dev, RxDiscard);
+	}
+
+	return 0;
+}
+
+static int
+boomerang_rx(struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	int entry = vp->cur_rx % RX_RING_SIZE;
+	void __iomem *ioaddr = vp->ioaddr;
+	int rx_status;
+	int rx_work_limit = RX_RING_SIZE;
+
+	if (vortex_debug > 5)
+		pr_debug("boomerang_rx(): status %4.4x\n", ioread16(ioaddr+EL3_STATUS));
+
+	while ((rx_status = le32_to_cpu(vp->rx_ring[entry].status)) & RxDComplete){
+		if (--rx_work_limit < 0)
+			break;
+		if (rx_status & RxDError) { /* Error, update stats. */
+			unsigned char rx_error = rx_status >> 16;
+			if (vortex_debug > 2)
+				pr_debug(" Rx error: status %2.2x.\n", rx_error);
+			dev->stats.rx_errors++;
+			if (rx_error & 0x01)  dev->stats.rx_over_errors++;
+			if (rx_error & 0x02)  dev->stats.rx_length_errors++;
+			if (rx_error & 0x04)  dev->stats.rx_frame_errors++;
+			if (rx_error & 0x08)  dev->stats.rx_crc_errors++;
+			if (rx_error & 0x10)  dev->stats.rx_length_errors++;
+		} else {
+			/* The packet length: up to 4.5K!. */
+			int pkt_len = rx_status & 0x1fff;
+			struct sk_buff *skb, *newskb;
+			dma_addr_t newdma;
+			dma_addr_t dma = le32_to_cpu(vp->rx_ring[entry].addr);
+
+			if (vortex_debug > 4)
+				pr_debug("Receiving packet size %d status %4.4x.\n",
+					   pkt_len, rx_status);
+
+			/* Check if the packet is long enough to just accept without
+			   copying to a properly sized skbuff. */
+			if (pkt_len < rx_copybreak &&
+			    (skb = netdev_alloc_skb(dev, pkt_len + 2)) != NULL) {
+				skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
+				dma_sync_single_for_cpu(vp->gendev, dma, PKT_BUF_SZ, DMA_FROM_DEVICE);
+				/* 'skb_put()' points to the start of sk_buff data area. */
+				skb_put_data(skb, vp->rx_skbuff[entry]->data,
+					     pkt_len);
+				dma_sync_single_for_device(vp->gendev, dma, PKT_BUF_SZ, DMA_FROM_DEVICE);
+				vp->rx_copy++;
+			} else {
+				/* Pre-allocate the replacement skb.  If it or its
+				 * mapping fails then recycle the buffer thats already
+				 * in place
+				 */
+				newskb = netdev_alloc_skb_ip_align(dev, PKT_BUF_SZ);
+				if (!newskb) {
+					dev->stats.rx_dropped++;
+					goto clear_complete;
+				}
+				newdma = dma_map_single(vp->gendev, newskb->data,
+							PKT_BUF_SZ, DMA_FROM_DEVICE);
+				if (dma_mapping_error(vp->gendev, newdma)) {
+					dev->stats.rx_dropped++;
+					consume_skb(newskb);
+					goto clear_complete;
+				}
+
+				/* Pass up the skbuff already on the Rx ring. */
+				skb = vp->rx_skbuff[entry];
+				vp->rx_skbuff[entry] = newskb;
+				vp->rx_ring[entry].addr = cpu_to_le32(newdma);
+				skb_put(skb, pkt_len);
+				dma_unmap_single(vp->gendev, dma, PKT_BUF_SZ, DMA_FROM_DEVICE);
+				vp->rx_nocopy++;
+			}
+			skb->protocol = eth_type_trans(skb, dev);
+			{					/* Use hardware checksum info. */
+				int csum_bits = rx_status & 0xee000000;
+				if (csum_bits &&
+					(csum_bits == (IPChksumValid | TCPChksumValid) ||
+					 csum_bits == (IPChksumValid | UDPChksumValid))) {
+					skb->ip_summed = CHECKSUM_UNNECESSARY;
+					vp->rx_csumhits++;
+				}
+			}
+			netif_rx(skb);
+			dev->stats.rx_packets++;
+		}
+
+clear_complete:
+		vp->rx_ring[entry].status = 0;	/* Clear complete bit. */
+		iowrite16(UpUnstall, ioaddr + EL3_CMD);
+		entry = (++vp->cur_rx) % RX_RING_SIZE;
+	}
+	return 0;
+}
+
+static void
+vortex_down(struct net_device *dev, int final_down)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+
+	netdev_reset_queue(dev);
+	netif_stop_queue(dev);
+
+	del_timer_sync(&vp->timer);
+
+	/* Turn off statistics ASAP.  We update dev->stats below. */
+	iowrite16(StatsDisable, ioaddr + EL3_CMD);
+
+	/* Disable the receiver and transmitter. */
+	iowrite16(RxDisable, ioaddr + EL3_CMD);
+	iowrite16(TxDisable, ioaddr + EL3_CMD);
+
+	/* Disable receiving 802.1q tagged frames */
+	set_8021q_mode(dev, 0);
+
+	if (dev->if_port == XCVR_10base2)
+		/* Turn off thinnet power.  Green! */
+		iowrite16(StopCoax, ioaddr + EL3_CMD);
+
+	iowrite16(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
+
+	update_stats(ioaddr, dev);
+	if (vp->full_bus_master_rx)
+		iowrite32(0, ioaddr + UpListPtr);
+	if (vp->full_bus_master_tx)
+		iowrite32(0, ioaddr + DownListPtr);
+
+	if (final_down && VORTEX_PCI(vp)) {
+		vp->pm_state_valid = 1;
+		pci_save_state(VORTEX_PCI(vp));
+		acpi_set_WOL(dev);
+	}
+}
+
+static int
+vortex_close(struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+	int i;
+
+	if (netif_device_present(dev))
+		vortex_down(dev, 1);
+
+	if (vortex_debug > 1) {
+		pr_debug("%s: vortex_close() status %4.4x, Tx status %2.2x.\n",
+			   dev->name, ioread16(ioaddr + EL3_STATUS), ioread8(ioaddr + TxStatus));
+		pr_debug("%s: vortex close stats: rx_nocopy %d rx_copy %d"
+			   " tx_queued %d Rx pre-checksummed %d.\n",
+			   dev->name, vp->rx_nocopy, vp->rx_copy, vp->queued_packet, vp->rx_csumhits);
+	}
+
+#if DO_ZEROCOPY
+	if (vp->rx_csumhits &&
+	    (vp->drv_flags & HAS_HWCKSM) == 0 &&
+	    (vp->card_idx >= MAX_UNITS || hw_checksums[vp->card_idx] == -1)) {
+		pr_warn("%s supports hardware checksums, and we're not using them!\n",
+			dev->name);
+	}
+#endif
+
+	free_irq(dev->irq, dev);
+
+	if (vp->full_bus_master_rx) { /* Free Boomerang bus master Rx buffers. */
+		for (i = 0; i < RX_RING_SIZE; i++)
+			if (vp->rx_skbuff[i]) {
+				dma_unmap_single(vp->gendev, le32_to_cpu(vp->rx_ring[i].addr),
+									PKT_BUF_SZ, DMA_FROM_DEVICE);
+				dev_kfree_skb(vp->rx_skbuff[i]);
+				vp->rx_skbuff[i] = NULL;
+			}
+	}
+	if (vp->full_bus_master_tx) { /* Free Boomerang bus master Tx buffers. */
+		for (i = 0; i < TX_RING_SIZE; i++) {
+			if (vp->tx_skbuff[i]) {
+				struct sk_buff *skb = vp->tx_skbuff[i];
+#if DO_ZEROCOPY
+				int k;
+
+				for (k=0; k<=skb_shinfo(skb)->nr_frags; k++)
+						dma_unmap_single(vp->gendev,
+										 le32_to_cpu(vp->tx_ring[i].frag[k].addr),
+										 le32_to_cpu(vp->tx_ring[i].frag[k].length)&0xFFF,
+										 DMA_TO_DEVICE);
+#else
+				dma_unmap_single(vp->gendev, le32_to_cpu(vp->tx_ring[i].addr), skb->len, DMA_TO_DEVICE);
+#endif
+				dev_kfree_skb(skb);
+				vp->tx_skbuff[i] = NULL;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static void
+dump_tx_ring(struct net_device *dev)
+{
+	if (vortex_debug > 0) {
+		struct vortex_private *vp = netdev_priv(dev);
+		void __iomem *ioaddr = vp->ioaddr;
+
+		if (vp->full_bus_master_tx) {
+			int i;
+			int stalled = ioread32(ioaddr + PktStatus) & 0x04;	/* Possible racy. But it's only debug stuff */
+
+			pr_err("  Flags; bus-master %d, dirty %d(%d) current %d(%d)\n",
+					vp->full_bus_master_tx,
+					vp->dirty_tx, vp->dirty_tx % TX_RING_SIZE,
+					vp->cur_tx, vp->cur_tx % TX_RING_SIZE);
+			pr_err("  Transmit list %8.8x vs. %p.\n",
+				   ioread32(ioaddr + DownListPtr),
+				   &vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]);
+			issue_and_wait(dev, DownStall);
+			for (i = 0; i < TX_RING_SIZE; i++) {
+				unsigned int length;
+
+#if DO_ZEROCOPY
+				length = le32_to_cpu(vp->tx_ring[i].frag[0].length);
+#else
+				length = le32_to_cpu(vp->tx_ring[i].length);
+#endif
+				pr_err("  %d: @%p  length %8.8x status %8.8x\n",
+					   i, &vp->tx_ring[i], length,
+					   le32_to_cpu(vp->tx_ring[i].status));
+			}
+			if (!stalled)
+				iowrite16(DownUnstall, ioaddr + EL3_CMD);
+		}
+	}
+}
+
+static struct net_device_stats *vortex_get_stats(struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+	unsigned long flags;
+
+	if (netif_device_present(dev)) {	/* AKPM: Used to be netif_running */
+		spin_lock_irqsave (&vp->lock, flags);
+		update_stats(ioaddr, dev);
+		spin_unlock_irqrestore (&vp->lock, flags);
+	}
+	return &dev->stats;
+}
+
+/*  Update statistics.
+	Unlike with the EL3 we need not worry about interrupts changing
+	the window setting from underneath us, but we must still guard
+	against a race condition with a StatsUpdate interrupt updating the
+	table.  This is done by checking that the ASM (!) code generated uses
+	atomic updates with '+='.
+	*/
+static void update_stats(void __iomem *ioaddr, struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+
+	/* Unlike the 3c5x9 we need not turn off stats updates while reading. */
+	/* Switch to the stats window, and read everything. */
+	dev->stats.tx_carrier_errors		+= window_read8(vp, 6, 0);
+	dev->stats.tx_heartbeat_errors		+= window_read8(vp, 6, 1);
+	dev->stats.tx_window_errors		+= window_read8(vp, 6, 4);
+	dev->stats.rx_fifo_errors		+= window_read8(vp, 6, 5);
+	dev->stats.tx_packets			+= window_read8(vp, 6, 6);
+	dev->stats.tx_packets			+= (window_read8(vp, 6, 9) &
+						    0x30) << 4;
+	/* Rx packets	*/			window_read8(vp, 6, 7);   /* Must read to clear */
+	/* Don't bother with register 9, an extension of registers 6&7.
+	   If we do use the 6&7 values the atomic update assumption above
+	   is invalid. */
+	dev->stats.rx_bytes 			+= window_read16(vp, 6, 10);
+	dev->stats.tx_bytes 			+= window_read16(vp, 6, 12);
+	/* Extra stats for get_ethtool_stats() */
+	vp->xstats.tx_multiple_collisions	+= window_read8(vp, 6, 2);
+	vp->xstats.tx_single_collisions         += window_read8(vp, 6, 3);
+	vp->xstats.tx_deferred			+= window_read8(vp, 6, 8);
+	vp->xstats.rx_bad_ssd			+= window_read8(vp, 4, 12);
+
+	dev->stats.collisions = vp->xstats.tx_multiple_collisions
+		+ vp->xstats.tx_single_collisions
+		+ vp->xstats.tx_max_collisions;
+
+	{
+		u8 up = window_read8(vp, 4, 13);
+		dev->stats.rx_bytes += (up & 0x0f) << 16;
+		dev->stats.tx_bytes += (up & 0xf0) << 12;
+	}
+}
+
+static int vortex_nway_reset(struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+
+	return mii_nway_restart(&vp->mii);
+}
+
+static int vortex_get_link_ksettings(struct net_device *dev,
+				     struct ethtool_link_ksettings *cmd)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+
+	mii_ethtool_get_link_ksettings(&vp->mii, cmd);
+
+	return 0;
+}
+
+static int vortex_set_link_ksettings(struct net_device *dev,
+				     const struct ethtool_link_ksettings *cmd)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+
+	return mii_ethtool_set_link_ksettings(&vp->mii, cmd);
+}
+
+static u32 vortex_get_msglevel(struct net_device *dev)
+{
+	return vortex_debug;
+}
+
+static void vortex_set_msglevel(struct net_device *dev, u32 dbg)
+{
+	vortex_debug = dbg;
+}
+
+static int vortex_get_sset_count(struct net_device *dev, int sset)
+{
+	switch (sset) {
+	case ETH_SS_STATS:
+		return VORTEX_NUM_STATS;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void vortex_get_ethtool_stats(struct net_device *dev,
+	struct ethtool_stats *stats, u64 *data)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&vp->lock, flags);
+	update_stats(ioaddr, dev);
+	spin_unlock_irqrestore(&vp->lock, flags);
+
+	data[0] = vp->xstats.tx_deferred;
+	data[1] = vp->xstats.tx_max_collisions;
+	data[2] = vp->xstats.tx_multiple_collisions;
+	data[3] = vp->xstats.tx_single_collisions;
+	data[4] = vp->xstats.rx_bad_ssd;
+}
+
+
+static void vortex_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+	switch (stringset) {
+	case ETH_SS_STATS:
+		memcpy(data, &ethtool_stats_keys, sizeof(ethtool_stats_keys));
+		break;
+	default:
+		WARN_ON(1);
+		break;
+	}
+}
+
+static void vortex_get_drvinfo(struct net_device *dev,
+					struct ethtool_drvinfo *info)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+
+	strscpy(info->driver, DRV_NAME, sizeof(info->driver));
+	if (VORTEX_PCI(vp)) {
+		strscpy(info->bus_info, pci_name(VORTEX_PCI(vp)),
+			sizeof(info->bus_info));
+	} else {
+		if (VORTEX_EISA(vp))
+			strscpy(info->bus_info, dev_name(vp->gendev),
+				sizeof(info->bus_info));
+		else
+			snprintf(info->bus_info, sizeof(info->bus_info),
+				"EISA 0x%lx %d", dev->base_addr, dev->irq);
+	}
+}
+
+static void vortex_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+
+	if (!VORTEX_PCI(vp))
+		return;
+
+	wol->supported = WAKE_MAGIC;
+
+	wol->wolopts = 0;
+	if (vp->enable_wol)
+		wol->wolopts |= WAKE_MAGIC;
+}
+
+static int vortex_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+
+	if (!VORTEX_PCI(vp))
+		return -EOPNOTSUPP;
+
+	if (wol->wolopts & ~WAKE_MAGIC)
+		return -EINVAL;
+
+	if (wol->wolopts & WAKE_MAGIC)
+		vp->enable_wol = 1;
+	else
+		vp->enable_wol = 0;
+	acpi_set_WOL(dev);
+
+	return 0;
+}
+
+static const struct ethtool_ops vortex_ethtool_ops = {
+	.get_drvinfo		= vortex_get_drvinfo,
+	.get_strings            = vortex_get_strings,
+	.get_msglevel           = vortex_get_msglevel,
+	.set_msglevel           = vortex_set_msglevel,
+	.get_ethtool_stats      = vortex_get_ethtool_stats,
+	.get_sset_count		= vortex_get_sset_count,
+	.get_link               = ethtool_op_get_link,
+	.nway_reset             = vortex_nway_reset,
+	.get_wol                = vortex_get_wol,
+	.set_wol                = vortex_set_wol,
+	.get_ts_info		= ethtool_op_get_ts_info,
+	.get_link_ksettings     = vortex_get_link_ksettings,
+	.set_link_ksettings     = vortex_set_link_ksettings,
+};
+
+#ifdef CONFIG_PCI
+/*
+ *	Must power the device up to do MDIO operations
+ */
+static int vortex_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	int err;
+	struct vortex_private *vp = netdev_priv(dev);
+	pci_power_t state = 0;
+
+	if(VORTEX_PCI(vp))
+		state = VORTEX_PCI(vp)->current_state;
+
+	/* The kernel core really should have pci_get_power_state() */
+
+	if(state != 0)
+		pci_set_power_state(VORTEX_PCI(vp), PCI_D0);
+	err = generic_mii_ioctl(&vp->mii, if_mii(rq), cmd, NULL);
+	if(state != 0)
+		pci_set_power_state(VORTEX_PCI(vp), state);
+
+	return err;
+}
+#endif
+
+
+/* Pre-Cyclone chips have no documented multicast filter, so the only
+   multicast setting is to receive all multicast frames.  At least
+   the chip has a very clean way to set the mode, unlike many others. */
+static void set_rx_mode(struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+	int new_mode;
+
+	if (dev->flags & IFF_PROMISC) {
+		if (vortex_debug > 3)
+			pr_notice("%s: Setting promiscuous mode.\n", dev->name);
+		new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast|RxProm;
+	} else	if (!netdev_mc_empty(dev) || dev->flags & IFF_ALLMULTI) {
+		new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast;
+	} else
+		new_mode = SetRxFilter | RxStation | RxBroadcast;
+
+	iowrite16(new_mode, ioaddr + EL3_CMD);
+}
+
+#if IS_ENABLED(CONFIG_VLAN_8021Q)
+/* Setup the card so that it can receive frames with an 802.1q VLAN tag.
+   Note that this must be done after each RxReset due to some backwards
+   compatibility logic in the Cyclone and Tornado ASICs */
+
+/* The Ethernet Type used for 802.1q tagged frames */
+#define VLAN_ETHER_TYPE 0x8100
+
+static void set_8021q_mode(struct net_device *dev, int enable)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	int mac_ctrl;
+
+	if ((vp->drv_flags&IS_CYCLONE) || (vp->drv_flags&IS_TORNADO)) {
+		/* cyclone and tornado chipsets can recognize 802.1q
+		 * tagged frames and treat them correctly */
+
+		int max_pkt_size = dev->mtu+14;	/* MTU+Ethernet header */
+		if (enable)
+			max_pkt_size += 4;	/* 802.1Q VLAN tag */
+
+		window_write16(vp, max_pkt_size, 3, Wn3_MaxPktSize);
+
+		/* set VlanEtherType to let the hardware checksumming
+		   treat tagged frames correctly */
+		window_write16(vp, VLAN_ETHER_TYPE, 7, Wn7_VlanEtherType);
+	} else {
+		/* on older cards we have to enable large frames */
+
+		vp->large_frames = dev->mtu > 1500 || enable;
+
+		mac_ctrl = window_read16(vp, 3, Wn3_MAC_Ctrl);
+		if (vp->large_frames)
+			mac_ctrl |= 0x40;
+		else
+			mac_ctrl &= ~0x40;
+		window_write16(vp, mac_ctrl, 3, Wn3_MAC_Ctrl);
+	}
+}
+#else
+
+static void set_8021q_mode(struct net_device *dev, int enable)
+{
+}
+
+
+#endif
+
+/* MII transceiver control section.
+   Read and write the MII registers using software-generated serial
+   MDIO protocol.  See the MII specifications or DP83840A data sheet
+   for details. */
+
+/* The maximum data clock rate is 2.5 Mhz.  The minimum timing is usually
+   met by back-to-back PCI I/O cycles, but we insert a delay to avoid
+   "overclocking" issues. */
+static void mdio_delay(struct vortex_private *vp)
+{
+	window_read32(vp, 4, Wn4_PhysicalMgmt);
+}
+
+#define MDIO_SHIFT_CLK	0x01
+#define MDIO_DIR_WRITE	0x04
+#define MDIO_DATA_WRITE0 (0x00 | MDIO_DIR_WRITE)
+#define MDIO_DATA_WRITE1 (0x02 | MDIO_DIR_WRITE)
+#define MDIO_DATA_READ	0x02
+#define MDIO_ENB_IN		0x00
+
+/* Generate the preamble required for initial synchronization and
+   a few older transceivers. */
+static void mdio_sync(struct vortex_private *vp, int bits)
+{
+	/* Establish sync by sending at least 32 logic ones. */
+	while (-- bits >= 0) {
+		window_write16(vp, MDIO_DATA_WRITE1, 4, Wn4_PhysicalMgmt);
+		mdio_delay(vp);
+		window_write16(vp, MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK,
+			       4, Wn4_PhysicalMgmt);
+		mdio_delay(vp);
+	}
+}
+
+static int mdio_read(struct net_device *dev, int phy_id, int location)
+{
+	int i;
+	struct vortex_private *vp = netdev_priv(dev);
+	int read_cmd = (0xf6 << 10) | (phy_id << 5) | location;
+	unsigned int retval = 0;
+
+	spin_lock_bh(&vp->mii_lock);
+
+	if (mii_preamble_required)
+		mdio_sync(vp, 32);
+
+	/* Shift the read command bits out. */
+	for (i = 14; i >= 0; i--) {
+		int dataval = (read_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
+		window_write16(vp, dataval, 4, Wn4_PhysicalMgmt);
+		mdio_delay(vp);
+		window_write16(vp, dataval | MDIO_SHIFT_CLK,
+			       4, Wn4_PhysicalMgmt);
+		mdio_delay(vp);
+	}
+	/* Read the two transition, 16 data, and wire-idle bits. */
+	for (i = 19; i > 0; i--) {
+		window_write16(vp, MDIO_ENB_IN, 4, Wn4_PhysicalMgmt);
+		mdio_delay(vp);
+		retval = (retval << 1) |
+			((window_read16(vp, 4, Wn4_PhysicalMgmt) &
+			  MDIO_DATA_READ) ? 1 : 0);
+		window_write16(vp, MDIO_ENB_IN | MDIO_SHIFT_CLK,
+			       4, Wn4_PhysicalMgmt);
+		mdio_delay(vp);
+	}
+
+	spin_unlock_bh(&vp->mii_lock);
+
+	return retval & 0x20000 ? 0xffff : retval>>1 & 0xffff;
+}
+
+static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	int write_cmd = 0x50020000 | (phy_id << 23) | (location << 18) | value;
+	int i;
+
+	spin_lock_bh(&vp->mii_lock);
+
+	if (mii_preamble_required)
+		mdio_sync(vp, 32);
+
+	/* Shift the command bits out. */
+	for (i = 31; i >= 0; i--) {
+		int dataval = (write_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
+		window_write16(vp, dataval, 4, Wn4_PhysicalMgmt);
+		mdio_delay(vp);
+		window_write16(vp, dataval | MDIO_SHIFT_CLK,
+			       4, Wn4_PhysicalMgmt);
+		mdio_delay(vp);
+	}
+	/* Leave the interface idle. */
+	for (i = 1; i >= 0; i--) {
+		window_write16(vp, MDIO_ENB_IN, 4, Wn4_PhysicalMgmt);
+		mdio_delay(vp);
+		window_write16(vp, MDIO_ENB_IN | MDIO_SHIFT_CLK,
+			       4, Wn4_PhysicalMgmt);
+		mdio_delay(vp);
+	}
+
+	spin_unlock_bh(&vp->mii_lock);
+}
+
+/* ACPI: Advanced Configuration and Power Interface. */
+/* Set Wake-On-LAN mode and put the board into D3 (power-down) state. */
+static void acpi_set_WOL(struct net_device *dev)
+{
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
+
+	device_set_wakeup_enable(vp->gendev, vp->enable_wol);
+
+	if (vp->enable_wol) {
+		/* Power up on: 1==Downloaded Filter, 2==Magic Packets, 4==Link Status. */
+		window_write16(vp, 2, 7, 0x0c);
+		/* The RxFilter must accept the WOL frames. */
+		iowrite16(SetRxFilter|RxStation|RxMulticast|RxBroadcast, ioaddr + EL3_CMD);
+		iowrite16(RxEnable, ioaddr + EL3_CMD);
+
+		if (pci_enable_wake(VORTEX_PCI(vp), PCI_D3hot, 1)) {
+			pr_info("%s: WOL not supported.\n", pci_name(VORTEX_PCI(vp)));
+
+			vp->enable_wol = 0;
+			return;
+		}
+
+		if (VORTEX_PCI(vp)->current_state < PCI_D3hot)
+			return;
+
+		/* Change the power state to D3; RxEnable doesn't take effect. */
+		pci_set_power_state(VORTEX_PCI(vp), PCI_D3hot);
+	}
+}
+
+
+static void vortex_remove_one(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct vortex_private *vp;
+
+	if (!dev) {
+		pr_err("vortex_remove_one called for Compaq device!\n");
+		BUG();
+	}
+
+	vp = netdev_priv(dev);
+
+	if (vp->cb_fn_base)
+		pci_iounmap(pdev, vp->cb_fn_base);
+
+	unregister_netdev(dev);
+
+	pci_set_power_state(pdev, PCI_D0);	/* Go active */
+	if (vp->pm_state_valid)
+		pci_restore_state(pdev);
+	pci_disable_device(pdev);
+
+	/* Should really use issue_and_wait() here */
+	iowrite16(TotalReset | ((vp->drv_flags & EEPROM_RESET) ? 0x04 : 0x14),
+	     vp->ioaddr + EL3_CMD);
+
+	pci_iounmap(pdev, vp->ioaddr);
+
+	dma_free_coherent(&pdev->dev,
+			sizeof(struct boom_rx_desc) * RX_RING_SIZE +
+			sizeof(struct boom_tx_desc) * TX_RING_SIZE,
+			vp->rx_ring, vp->rx_ring_dma);
+
+	pci_release_regions(pdev);
+
+	free_netdev(dev);
+}
+
+
+static struct pci_driver vortex_driver = {
+	.name		= "3c59x",
+	.probe		= vortex_init_one,
+	.remove		= vortex_remove_one,
+	.id_table	= vortex_pci_tbl,
+	.driver.pm	= VORTEX_PM_OPS,
+};
+
+
+static int vortex_have_pci;
+static int vortex_have_eisa;
+
+
+static int __init vortex_init(void)
+{
+	int pci_rc, eisa_rc;
+
+	pci_rc = pci_register_driver(&vortex_driver);
+	eisa_rc = vortex_eisa_init();
+
+	if (pci_rc == 0)
+		vortex_have_pci = 1;
+	if (eisa_rc > 0)
+		vortex_have_eisa = 1;
+
+	return (vortex_have_pci + vortex_have_eisa) ? 0 : -ENODEV;
+}
+
+
+static void __exit vortex_eisa_cleanup(void)
+{
+	void __iomem *ioaddr;
+
+#ifdef CONFIG_EISA
+	/* Take care of the EISA devices */
+	eisa_driver_unregister(&vortex_eisa_driver);
+#endif
+
+	if (compaq_net_device) {
+		ioaddr = ioport_map(compaq_net_device->base_addr,
+		                    VORTEX_TOTAL_SIZE);
+
+		unregister_netdev(compaq_net_device);
+		iowrite16(TotalReset, ioaddr + EL3_CMD);
+		release_region(compaq_net_device->base_addr,
+		               VORTEX_TOTAL_SIZE);
+
+		free_netdev(compaq_net_device);
+	}
+}
+
+
+static void __exit vortex_cleanup(void)
+{
+	if (vortex_have_pci)
+		pci_unregister_driver(&vortex_driver);
+	if (vortex_have_eisa)
+		vortex_eisa_cleanup();
+}
+
+
+module_init(vortex_init);
+module_exit(vortex_cleanup);
diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig
new file mode 100644
index 000000000..706bd59bf
--- /dev/null
+++ b/drivers/net/ethernet/3com/Kconfig
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# 3Com Ethernet device configuration
+#
+
+config NET_VENDOR_3COM
+	bool "3Com devices"
+	default y
+	depends on ISA || EISA || PCI || PCMCIA
+	help
+	  If you have a network (Ethernet) card belonging to this class, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about 3Com cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_3COM
+
+config EL3
+	tristate "3c509/3c579 \"EtherLink III\" support"
+	depends on (ISA || EISA)
+	help
+	  If you have a network (Ethernet) card belonging to the 3Com
+	  EtherLinkIII series, say Y here.
+
+	  If your card is not working you may need to use the DOS
+	  setup disk to disable Plug & Play mode, and to select the default
+	  media type.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c509.
+
+config 3C515
+	tristate "3c515 ISA \"Fast EtherLink\""
+	depends on ISA && ISA_DMA_API && !PPC32
+	select NETDEV_LEGACY_INIT
+	help
+	  If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
+	  network card, say Y here.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c515.
+
+config PCMCIA_3C574
+	tristate "3Com 3c574 PCMCIA support"
+	depends on PCMCIA
+	help
+	  Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
+	  (PC-card) Fast Ethernet card to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called 3c574_cs.  If unsure, say N.
+
+config PCMCIA_3C589
+	tristate "3Com 3c589 PCMCIA support"
+	depends on PCMCIA
+	help
+	  Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
+	  (PC-card) Ethernet card to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called 3c589_cs.  If unsure, say N.
+
+config VORTEX
+	tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
+	depends on (PCI || EISA) && HAS_IOPORT_MAP
+	select MII
+	help
+	  This option enables driver support for a large number of 10Mbps and
+	  10/100Mbps EISA, PCI and Cardbus 3Com network cards:
+
+	  "Vortex"    (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
+	  "Boomerang" (EtherLink XL 3c900 or 3c905)            PCI
+	  "Cyclone"   (3c540/3c900/3c905/3c980/3c575/3c656)    PCI and Cardbus
+	  "Tornado"   (3c905)                                  PCI
+	  "Hurricane" (3c555/3cSOHO)                           PCI
+
+	  If you have such a card, say Y here.  More specific information is in
+	  <file:Documentation/networking/device_drivers/ethernet/3com/vortex.rst>
+	  and in the comments at the beginning of
+	  <file:drivers/net/ethernet/3com/3c59x.c>.
+
+	  To compile this support as a module, choose M here.
+
+config TYPHOON
+	tristate "3cr990 series \"Typhoon\" support"
+	depends on PCI
+	select CRC32
+	help
+	  This option enables driver support for the 3cr990 series of cards:
+
+	  3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
+	  3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
+	  3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
+
+	  If you have a network (Ethernet) card of this type, say Y here.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called typhoon.
+
+endif # NET_VENDOR_3COM
diff --git a/drivers/net/ethernet/3com/Makefile b/drivers/net/ethernet/3com/Makefile
new file mode 100644
index 000000000..f8b73babc
--- /dev/null
+++ b/drivers/net/ethernet/3com/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the 3Com Ethernet device drivers
+#
+
+obj-$(CONFIG_EL3) += 3c509.o
+obj-$(CONFIG_3C515) += 3c515.o
+obj-$(CONFIG_PCMCIA_3C589) += 3c589_cs.o
+obj-$(CONFIG_PCMCIA_3C574) += 3c574_cs.o
+obj-$(CONFIG_VORTEX) += 3c59x.o
+obj-$(CONFIG_TYPHOON) += typhoon.o
diff --git a/drivers/net/ethernet/3com/typhoon.c b/drivers/net/ethernet/3com/typhoon.c
new file mode 100644
index 000000000..aaaff3ba4
--- /dev/null
+++ b/drivers/net/ethernet/3com/typhoon.c
@@ -0,0 +1,2588 @@
+/* typhoon.c: A Linux Ethernet device driver for 3Com 3CR990 family of NICs */
+/*
+	Written 2002-2004 by David Dillow <dave@thedillows.org>
+	Based on code written 1998-2000 by Donald Becker <becker@scyld.com> and
+	Linux 2.2.x driver by David P. McLean <davidpmclean@yahoo.com>.
+
+	This software may be used and distributed according to the terms of
+	the GNU General Public License (GPL), incorporated herein by reference.
+	Drivers based on or derived from this code fall under the GPL and must
+	retain the authorship, copyright and license notice.  This file is not
+	a complete program and may only be used when the entire operating
+	system is licensed under the GPL.
+
+	This software is available on a public web site. It may enable
+	cryptographic capabilities of the 3Com hardware, and may be
+	exported from the United States under License Exception "TSU"
+	pursuant to 15 C.F.R. Section 740.13(e).
+
+	This work was funded by the National Library of Medicine under
+	the Department of Energy project number 0274DD06D1 and NLM project
+	number Y1-LM-2015-01.
+
+	This driver is designed for the 3Com 3CR990 Family of cards with the
+	3XP Processor. It has been tested on x86 and sparc64.
+
+	KNOWN ISSUES:
+	*) Cannot DMA Rx packets to a 2 byte aligned address. Also firmware
+		issue. Hopefully 3Com will fix it.
+	*) Waiting for a command response takes 8ms due to non-preemptable
+		polling. Only significant for getting stats and creating
+		SAs, but an ugly wart never the less.
+
+	TODO:
+	*) Doesn't do IPSEC offloading. Yet. Keep yer pants on, it's coming.
+	*) Add more support for ethtool (especially for NIC stats)
+	*) Allow disabling of RX checksum offloading
+	*) Fix MAC changing to work while the interface is up
+		(Need to put commands on the TX ring, which changes
+		the locking)
+	*) Add in FCS to {rx,tx}_bytes, since the hardware doesn't. See
+		http://oss.sgi.com/cgi-bin/mesg.cgi?a=netdev&i=20031215152211.7003fe8e.rddunlap%40osdl.org
+*/
+
+/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
+ * Setting to > 1518 effectively disables this feature.
+ */
+static int rx_copybreak = 200;
+
+/* Should we use MMIO or Port IO?
+ * 0: Port IO
+ * 1: MMIO
+ * 2: Try MMIO, fallback to Port IO
+ */
+static unsigned int use_mmio = 2;
+
+/* end user-configurable values */
+
+/* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
+ */
+static const int multicast_filter_limit = 32;
+
+/* Operational parameters that are set at compile time. */
+
+/* Keep the ring sizes a power of two for compile efficiency.
+ * The compiler will convert <unsigned>'%'<2^N> into a bit mask.
+ * Making the Tx ring too large decreases the effectiveness of channel
+ * bonding and packet priority.
+ * There are no ill effects from too-large receive rings.
+ *
+ * We don't currently use the Hi Tx ring so, don't make it very big.
+ *
+ * Beware that if we start using the Hi Tx ring, we will need to change
+ * typhoon_num_free_tx() and typhoon_tx_complete() to account for that.
+ */
+#define TXHI_ENTRIES		2
+#define TXLO_ENTRIES		128
+#define RX_ENTRIES		32
+#define COMMAND_ENTRIES		16
+#define RESPONSE_ENTRIES	32
+
+#define COMMAND_RING_SIZE	(COMMAND_ENTRIES * sizeof(struct cmd_desc))
+#define RESPONSE_RING_SIZE	(RESPONSE_ENTRIES * sizeof(struct resp_desc))
+
+/* The 3XP will preload and remove 64 entries from the free buffer
+ * list, and we need one entry to keep the ring from wrapping, so
+ * to keep this a power of two, we use 128 entries.
+ */
+#define RXFREE_ENTRIES		128
+#define RXENT_ENTRIES		(RXFREE_ENTRIES - 1)
+
+/* Operational parameters that usually are not changed. */
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT  (2*HZ)
+
+#define PKT_BUF_SZ		1536
+#define FIRMWARE_NAME		"3com/typhoon.bin"
+
+#define pr_fmt(fmt)		KBUILD_MODNAME " " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/crc32.h>
+#include <linux/bitops.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/in6.h>
+#include <linux/dma-mapping.h>
+#include <linux/firmware.h>
+
+#include "typhoon.h"
+
+MODULE_AUTHOR("David Dillow <dave@thedillows.org>");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(FIRMWARE_NAME);
+MODULE_DESCRIPTION("3Com Typhoon Family (3C990, 3CR990, and variants)");
+MODULE_PARM_DESC(rx_copybreak, "Packets smaller than this are copied and "
+			       "the buffer given back to the NIC. Default "
+			       "is 200.");
+MODULE_PARM_DESC(use_mmio, "Use MMIO (1) or PIO(0) to access the NIC. "
+			   "Default is to try MMIO and fallback to PIO.");
+module_param(rx_copybreak, int, 0);
+module_param(use_mmio, int, 0);
+
+#if TXLO_ENTRIES <= (2 * MAX_SKB_FRAGS)
+#error TX ring too small!
+#endif
+
+struct typhoon_card_info {
+	const char *name;
+	const int capabilities;
+};
+
+#define TYPHOON_CRYPTO_NONE		0x00
+#define TYPHOON_CRYPTO_DES		0x01
+#define TYPHOON_CRYPTO_3DES		0x02
+#define	TYPHOON_CRYPTO_VARIABLE		0x04
+#define TYPHOON_FIBER			0x08
+#define TYPHOON_WAKEUP_NEEDS_RESET	0x10
+
+enum typhoon_cards {
+	TYPHOON_TX = 0, TYPHOON_TX95, TYPHOON_TX97, TYPHOON_SVR,
+	TYPHOON_SVR95, TYPHOON_SVR97, TYPHOON_TXM, TYPHOON_BSVR,
+	TYPHOON_FX95, TYPHOON_FX97, TYPHOON_FX95SVR, TYPHOON_FX97SVR,
+	TYPHOON_FXM,
+};
+
+/* directly indexed by enum typhoon_cards, above */
+static struct typhoon_card_info typhoon_card_info[] = {
+	{ "3Com Typhoon (3C990-TX)",
+		TYPHOON_CRYPTO_NONE},
+	{ "3Com Typhoon (3CR990-TX-95)",
+		TYPHOON_CRYPTO_DES},
+	{ "3Com Typhoon (3CR990-TX-97)",
+	 	TYPHOON_CRYPTO_DES | TYPHOON_CRYPTO_3DES},
+	{ "3Com Typhoon (3C990SVR)",
+		TYPHOON_CRYPTO_NONE},
+	{ "3Com Typhoon (3CR990SVR95)",
+		TYPHOON_CRYPTO_DES},
+	{ "3Com Typhoon (3CR990SVR97)",
+	 	TYPHOON_CRYPTO_DES | TYPHOON_CRYPTO_3DES},
+	{ "3Com Typhoon2 (3C990B-TX-M)",
+		TYPHOON_CRYPTO_VARIABLE},
+	{ "3Com Typhoon2 (3C990BSVR)",
+		TYPHOON_CRYPTO_VARIABLE},
+	{ "3Com Typhoon (3CR990-FX-95)",
+		TYPHOON_CRYPTO_DES | TYPHOON_FIBER},
+	{ "3Com Typhoon (3CR990-FX-97)",
+	 	TYPHOON_CRYPTO_DES | TYPHOON_CRYPTO_3DES | TYPHOON_FIBER},
+	{ "3Com Typhoon (3CR990-FX-95 Server)",
+	 	TYPHOON_CRYPTO_DES | TYPHOON_FIBER},
+	{ "3Com Typhoon (3CR990-FX-97 Server)",
+	 	TYPHOON_CRYPTO_DES | TYPHOON_CRYPTO_3DES | TYPHOON_FIBER},
+	{ "3Com Typhoon2 (3C990B-FX-97)",
+		TYPHOON_CRYPTO_VARIABLE | TYPHOON_FIBER},
+};
+
+/* Notes on the new subsystem numbering scheme:
+ * bits 0-1 indicate crypto capabilities: (0) variable, (1) DES, or (2) 3DES
+ * bit 4 indicates if this card has secured firmware (we don't support it)
+ * bit 8 indicates if this is a (0) copper or (1) fiber card
+ * bits 12-16 indicate card type: (0) client and (1) server
+ */
+static const struct pci_device_id typhoon_pci_tbl[] = {
+	{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0,TYPHOON_TX },
+	{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_TX_95,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPHOON_TX95 },
+	{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_TX_97,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPHOON_TX97 },
+	{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990B,
+	  PCI_ANY_ID, 0x1000, 0, 0, TYPHOON_TXM },
+	{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990B,
+	  PCI_ANY_ID, 0x1102, 0, 0, TYPHOON_FXM },
+	{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990B,
+	  PCI_ANY_ID, 0x2000, 0, 0, TYPHOON_BSVR },
+	{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_FX,
+	  PCI_ANY_ID, 0x1101, 0, 0, TYPHOON_FX95 },
+	{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_FX,
+	  PCI_ANY_ID, 0x1102, 0, 0, TYPHOON_FX97 },
+	{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_FX,
+	  PCI_ANY_ID, 0x2101, 0, 0, TYPHOON_FX95SVR },
+	{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_FX,
+	  PCI_ANY_ID, 0x2102, 0, 0, TYPHOON_FX97SVR },
+	{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990SVR95,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPHOON_SVR95 },
+	{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990SVR97,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPHOON_SVR97 },
+	{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990SVR,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPHOON_SVR },
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, typhoon_pci_tbl);
+
+/* Define the shared memory area
+ * Align everything the 3XP will normally be using.
+ * We'll need to move/align txHi if we start using that ring.
+ */
+#define __3xp_aligned	____cacheline_aligned
+struct typhoon_shared {
+	struct typhoon_interface	iface;
+	struct typhoon_indexes		indexes			__3xp_aligned;
+	struct tx_desc			txLo[TXLO_ENTRIES] 	__3xp_aligned;
+	struct rx_desc			rxLo[RX_ENTRIES]	__3xp_aligned;
+	struct rx_desc			rxHi[RX_ENTRIES]	__3xp_aligned;
+	struct cmd_desc			cmd[COMMAND_ENTRIES]	__3xp_aligned;
+	struct resp_desc		resp[RESPONSE_ENTRIES]	__3xp_aligned;
+	struct rx_free			rxBuff[RXFREE_ENTRIES]	__3xp_aligned;
+	u32				zeroWord;
+	struct tx_desc			txHi[TXHI_ENTRIES];
+} __packed;
+
+struct rxbuff_ent {
+	struct sk_buff *skb;
+	dma_addr_t	dma_addr;
+};
+
+struct typhoon {
+	/* Tx cache line section */
+	struct transmit_ring 	txLoRing	____cacheline_aligned;
+	struct pci_dev *	tx_pdev;
+	void __iomem		*tx_ioaddr;
+	u32			txlo_dma_addr;
+
+	/* Irq/Rx cache line section */
+	void __iomem		*ioaddr		____cacheline_aligned;
+	struct typhoon_indexes *indexes;
+	u8			awaiting_resp;
+	u8			duplex;
+	u8			speed;
+	u8			card_state;
+	struct basic_ring	rxLoRing;
+	struct pci_dev *	pdev;
+	struct net_device *	dev;
+	struct napi_struct	napi;
+	struct basic_ring	rxHiRing;
+	struct basic_ring	rxBuffRing;
+	struct rxbuff_ent	rxbuffers[RXENT_ENTRIES];
+
+	/* general section */
+	spinlock_t		command_lock	____cacheline_aligned;
+	struct basic_ring	cmdRing;
+	struct basic_ring	respRing;
+	struct net_device_stats	stats_saved;
+	struct typhoon_shared *	shared;
+	dma_addr_t		shared_dma;
+	__le16			xcvr_select;
+	__le16			wol_events;
+	__le32			offload;
+
+	/* unused stuff (future use) */
+	int			capabilities;
+	struct transmit_ring 	txHiRing;
+};
+
+enum completion_wait_values {
+	NoWait = 0, WaitNoSleep, WaitSleep,
+};
+
+/* These are the values for the typhoon.card_state variable.
+ * These determine where the statistics will come from in get_stats().
+ * The sleep image does not support the statistics we need.
+ */
+enum state_values {
+	Sleeping = 0, Running,
+};
+
+/* PCI writes are not guaranteed to be posted in order, but outstanding writes
+ * cannot pass a read, so this forces current writes to post.
+ */
+#define typhoon_post_pci_writes(x) \
+	do { if (likely(use_mmio)) ioread32(x+TYPHOON_REG_HEARTBEAT); } while (0)
+
+/* We'll wait up to six seconds for a reset, and half a second normally.
+ */
+#define TYPHOON_UDELAY			50
+#define TYPHOON_RESET_TIMEOUT_SLEEP	(6 * HZ)
+#define TYPHOON_RESET_TIMEOUT_NOSLEEP	((6 * 1000000) / TYPHOON_UDELAY)
+#define TYPHOON_WAIT_TIMEOUT		((1000000 / 2) / TYPHOON_UDELAY)
+
+#if defined(NETIF_F_TSO)
+#define skb_tso_size(x)		(skb_shinfo(x)->gso_size)
+#define TSO_NUM_DESCRIPTORS	2
+#define TSO_OFFLOAD_ON		TYPHOON_OFFLOAD_TCP_SEGMENT
+#else
+#define NETIF_F_TSO 		0
+#define skb_tso_size(x) 	0
+#define TSO_NUM_DESCRIPTORS	0
+#define TSO_OFFLOAD_ON		0
+#endif
+
+static inline void
+typhoon_inc_index(u32 *index, const int count, const int num_entries)
+{
+	/* Increment a ring index -- we can use this for all rings execept
+	 * the Rx rings, as they use different size descriptors
+	 * otherwise, everything is the same size as a cmd_desc
+	 */
+	*index += count * sizeof(struct cmd_desc);
+	*index %= num_entries * sizeof(struct cmd_desc);
+}
+
+static inline void
+typhoon_inc_cmd_index(u32 *index, const int count)
+{
+	typhoon_inc_index(index, count, COMMAND_ENTRIES);
+}
+
+static inline void
+typhoon_inc_resp_index(u32 *index, const int count)
+{
+	typhoon_inc_index(index, count, RESPONSE_ENTRIES);
+}
+
+static inline void
+typhoon_inc_rxfree_index(u32 *index, const int count)
+{
+	typhoon_inc_index(index, count, RXFREE_ENTRIES);
+}
+
+static inline void
+typhoon_inc_tx_index(u32 *index, const int count)
+{
+	/* if we start using the Hi Tx ring, this needs updating */
+	typhoon_inc_index(index, count, TXLO_ENTRIES);
+}
+
+static inline void
+typhoon_inc_rx_index(u32 *index, const int count)
+{
+	/* sizeof(struct rx_desc) != sizeof(struct cmd_desc) */
+	*index += count * sizeof(struct rx_desc);
+	*index %= RX_ENTRIES * sizeof(struct rx_desc);
+}
+
+static int
+typhoon_reset(void __iomem *ioaddr, int wait_type)
+{
+	int i, err = 0;
+	int timeout;
+
+	if (wait_type == WaitNoSleep)
+		timeout = TYPHOON_RESET_TIMEOUT_NOSLEEP;
+	else
+		timeout = TYPHOON_RESET_TIMEOUT_SLEEP;
+
+	iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_MASK);
+	iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_STATUS);
+
+	iowrite32(TYPHOON_RESET_ALL, ioaddr + TYPHOON_REG_SOFT_RESET);
+	typhoon_post_pci_writes(ioaddr);
+	udelay(1);
+	iowrite32(TYPHOON_RESET_NONE, ioaddr + TYPHOON_REG_SOFT_RESET);
+
+	if (wait_type != NoWait) {
+		for (i = 0; i < timeout; i++) {
+			if (ioread32(ioaddr + TYPHOON_REG_STATUS) ==
+			   TYPHOON_STATUS_WAITING_FOR_HOST)
+				goto out;
+
+			if (wait_type == WaitSleep)
+				schedule_timeout_uninterruptible(1);
+			else
+				udelay(TYPHOON_UDELAY);
+		}
+
+		err = -ETIMEDOUT;
+	}
+
+out:
+	iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_MASK);
+	iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_STATUS);
+
+	/* The 3XP seems to need a little extra time to complete the load
+	 * of the sleep image before we can reliably boot it. Failure to
+	 * do this occasionally results in a hung adapter after boot in
+	 * typhoon_init_one() while trying to read the MAC address or
+	 * putting the card to sleep. 3Com's driver waits 5ms, but
+	 * that seems to be overkill. However, if we can sleep, we might
+	 * as well give it that much time. Otherwise, we'll give it 500us,
+	 * which should be enough (I've see it work well at 100us, but still
+	 * saw occasional problems.)
+	 */
+	if (wait_type == WaitSleep)
+		msleep(5);
+	else
+		udelay(500);
+	return err;
+}
+
+static int
+typhoon_wait_status(void __iomem *ioaddr, u32 wait_value)
+{
+	int i, err = 0;
+
+	for (i = 0; i < TYPHOON_WAIT_TIMEOUT; i++) {
+		if (ioread32(ioaddr + TYPHOON_REG_STATUS) == wait_value)
+			goto out;
+		udelay(TYPHOON_UDELAY);
+	}
+
+	err = -ETIMEDOUT;
+
+out:
+	return err;
+}
+
+static inline void
+typhoon_media_status(struct net_device *dev, struct resp_desc *resp)
+{
+	if (resp->parm1 & TYPHOON_MEDIA_STAT_NO_LINK)
+		netif_carrier_off(dev);
+	else
+		netif_carrier_on(dev);
+}
+
+static inline void
+typhoon_hello(struct typhoon *tp)
+{
+	struct basic_ring *ring = &tp->cmdRing;
+	struct cmd_desc *cmd;
+
+	/* We only get a hello request if we've not sent anything to the
+	 * card in a long while. If the lock is held, then we're in the
+	 * process of issuing a command, so we don't need to respond.
+	 */
+	if (spin_trylock(&tp->command_lock)) {
+		cmd = (struct cmd_desc *)(ring->ringBase + ring->lastWrite);
+		typhoon_inc_cmd_index(&ring->lastWrite, 1);
+
+		INIT_COMMAND_NO_RESPONSE(cmd, TYPHOON_CMD_HELLO_RESP);
+		wmb();
+		iowrite32(ring->lastWrite, tp->ioaddr + TYPHOON_REG_CMD_READY);
+		spin_unlock(&tp->command_lock);
+	}
+}
+
+static int
+typhoon_process_response(struct typhoon *tp, int resp_size,
+				struct resp_desc *resp_save)
+{
+	struct typhoon_indexes *indexes = tp->indexes;
+	struct resp_desc *resp;
+	u8 *base = tp->respRing.ringBase;
+	int count, len, wrap_len;
+	u32 cleared;
+	u32 ready;
+
+	cleared = le32_to_cpu(indexes->respCleared);
+	ready = le32_to_cpu(indexes->respReady);
+	while (cleared != ready) {
+		resp = (struct resp_desc *)(base + cleared);
+		count = resp->numDesc + 1;
+		if (resp_save && resp->seqNo) {
+			if (count > resp_size) {
+				resp_save->flags = TYPHOON_RESP_ERROR;
+				goto cleanup;
+			}
+
+			wrap_len = 0;
+			len = count * sizeof(*resp);
+			if (unlikely(cleared + len > RESPONSE_RING_SIZE)) {
+				wrap_len = cleared + len - RESPONSE_RING_SIZE;
+				len = RESPONSE_RING_SIZE - cleared;
+			}
+
+			memcpy(resp_save, resp, len);
+			if (unlikely(wrap_len)) {
+				resp_save += len / sizeof(*resp);
+				memcpy(resp_save, base, wrap_len);
+			}
+
+			resp_save = NULL;
+		} else if (resp->cmd == TYPHOON_CMD_READ_MEDIA_STATUS) {
+			typhoon_media_status(tp->dev, resp);
+		} else if (resp->cmd == TYPHOON_CMD_HELLO_RESP) {
+			typhoon_hello(tp);
+		} else {
+			netdev_err(tp->dev,
+				   "dumping unexpected response 0x%04x:%d:0x%02x:0x%04x:%08x:%08x\n",
+				   le16_to_cpu(resp->cmd),
+				   resp->numDesc, resp->flags,
+				   le16_to_cpu(resp->parm1),
+				   le32_to_cpu(resp->parm2),
+				   le32_to_cpu(resp->parm3));
+		}
+
+cleanup:
+		typhoon_inc_resp_index(&cleared, count);
+	}
+
+	indexes->respCleared = cpu_to_le32(cleared);
+	wmb();
+	return resp_save == NULL;
+}
+
+static inline int
+typhoon_num_free(int lastWrite, int lastRead, int ringSize)
+{
+	/* this works for all descriptors but rx_desc, as they are a
+	 * different size than the cmd_desc -- everyone else is the same
+	 */
+	lastWrite /= sizeof(struct cmd_desc);
+	lastRead /= sizeof(struct cmd_desc);
+	return (ringSize + lastRead - lastWrite - 1) % ringSize;
+}
+
+static inline int
+typhoon_num_free_cmd(struct typhoon *tp)
+{
+	int lastWrite = tp->cmdRing.lastWrite;
+	int cmdCleared = le32_to_cpu(tp->indexes->cmdCleared);
+
+	return typhoon_num_free(lastWrite, cmdCleared, COMMAND_ENTRIES);
+}
+
+static inline int
+typhoon_num_free_resp(struct typhoon *tp)
+{
+	int respReady = le32_to_cpu(tp->indexes->respReady);
+	int respCleared = le32_to_cpu(tp->indexes->respCleared);
+
+	return typhoon_num_free(respReady, respCleared, RESPONSE_ENTRIES);
+}
+
+static inline int
+typhoon_num_free_tx(struct transmit_ring *ring)
+{
+	/* if we start using the Hi Tx ring, this needs updating */
+	return typhoon_num_free(ring->lastWrite, ring->lastRead, TXLO_ENTRIES);
+}
+
+static int
+typhoon_issue_command(struct typhoon *tp, int num_cmd, struct cmd_desc *cmd,
+		      int num_resp, struct resp_desc *resp)
+{
+	struct typhoon_indexes *indexes = tp->indexes;
+	struct basic_ring *ring = &tp->cmdRing;
+	struct resp_desc local_resp;
+	int i, err = 0;
+	int got_resp;
+	int freeCmd, freeResp;
+	int len, wrap_len;
+
+	spin_lock(&tp->command_lock);
+
+	freeCmd = typhoon_num_free_cmd(tp);
+	freeResp = typhoon_num_free_resp(tp);
+
+	if (freeCmd < num_cmd || freeResp < num_resp) {
+		netdev_err(tp->dev, "no descs for cmd, had (needed) %d (%d) cmd, %d (%d) resp\n",
+			   freeCmd, num_cmd, freeResp, num_resp);
+		err = -ENOMEM;
+		goto out;
+	}
+
+	if (cmd->flags & TYPHOON_CMD_RESPOND) {
+		/* If we're expecting a response, but the caller hasn't given
+		 * us a place to put it, we'll provide one.
+		 */
+		tp->awaiting_resp = 1;
+		if (resp == NULL) {
+			resp = &local_resp;
+			num_resp = 1;
+		}
+	}
+
+	wrap_len = 0;
+	len = num_cmd * sizeof(*cmd);
+	if (unlikely(ring->lastWrite + len > COMMAND_RING_SIZE)) {
+		wrap_len = ring->lastWrite + len - COMMAND_RING_SIZE;
+		len = COMMAND_RING_SIZE - ring->lastWrite;
+	}
+
+	memcpy(ring->ringBase + ring->lastWrite, cmd, len);
+	if (unlikely(wrap_len)) {
+		struct cmd_desc *wrap_ptr = cmd;
+		wrap_ptr += len / sizeof(*cmd);
+		memcpy(ring->ringBase, wrap_ptr, wrap_len);
+	}
+
+	typhoon_inc_cmd_index(&ring->lastWrite, num_cmd);
+
+	/* "I feel a presence... another warrior is on the mesa."
+	 */
+	wmb();
+	iowrite32(ring->lastWrite, tp->ioaddr + TYPHOON_REG_CMD_READY);
+	typhoon_post_pci_writes(tp->ioaddr);
+
+	if ((cmd->flags & TYPHOON_CMD_RESPOND) == 0)
+		goto out;
+
+	/* Ugh. We'll be here about 8ms, spinning our thumbs, unable to
+	 * preempt or do anything other than take interrupts. So, don't
+	 * wait for a response unless you have to.
+	 *
+	 * I've thought about trying to sleep here, but we're called
+	 * from many contexts that don't allow that. Also, given the way
+	 * 3Com has implemented irq coalescing, we would likely timeout --
+	 * this has been observed in real life!
+	 *
+	 * The big killer is we have to wait to get stats from the card,
+	 * though we could go to a periodic refresh of those if we don't
+	 * mind them getting somewhat stale. The rest of the waiting
+	 * commands occur during open/close/suspend/resume, so they aren't
+	 * time critical. Creating SAs in the future will also have to
+	 * wait here.
+	 */
+	got_resp = 0;
+	for (i = 0; i < TYPHOON_WAIT_TIMEOUT && !got_resp; i++) {
+		if (indexes->respCleared != indexes->respReady)
+			got_resp = typhoon_process_response(tp, num_resp,
+								resp);
+		udelay(TYPHOON_UDELAY);
+	}
+
+	if (!got_resp) {
+		err = -ETIMEDOUT;
+		goto out;
+	}
+
+	/* Collect the error response even if we don't care about the
+	 * rest of the response
+	 */
+	if (resp->flags & TYPHOON_RESP_ERROR)
+		err = -EIO;
+
+out:
+	if (tp->awaiting_resp) {
+		tp->awaiting_resp = 0;
+		smp_wmb();
+
+		/* Ugh. If a response was added to the ring between
+		 * the call to typhoon_process_response() and the clearing
+		 * of tp->awaiting_resp, we could have missed the interrupt
+		 * and it could hang in the ring an indeterminate amount of
+		 * time. So, check for it, and interrupt ourselves if this
+		 * is the case.
+		 */
+		if (indexes->respCleared != indexes->respReady)
+			iowrite32(1, tp->ioaddr + TYPHOON_REG_SELF_INTERRUPT);
+	}
+
+	spin_unlock(&tp->command_lock);
+	return err;
+}
+
+static inline void
+typhoon_tso_fill(struct sk_buff *skb, struct transmit_ring *txRing,
+			u32 ring_dma)
+{
+	struct tcpopt_desc *tcpd;
+	u32 tcpd_offset = ring_dma;
+
+	tcpd = (struct tcpopt_desc *) (txRing->ringBase + txRing->lastWrite);
+	tcpd_offset += txRing->lastWrite;
+	tcpd_offset += offsetof(struct tcpopt_desc, bytesTx);
+	typhoon_inc_tx_index(&txRing->lastWrite, 1);
+
+	tcpd->flags = TYPHOON_OPT_DESC | TYPHOON_OPT_TCP_SEG;
+	tcpd->numDesc = 1;
+	tcpd->mss_flags = cpu_to_le16(skb_tso_size(skb));
+	tcpd->mss_flags |= TYPHOON_TSO_FIRST | TYPHOON_TSO_LAST;
+	tcpd->respAddrLo = cpu_to_le32(tcpd_offset);
+	tcpd->bytesTx = cpu_to_le32(skb->len);
+	tcpd->status = 0;
+}
+
+static netdev_tx_t
+typhoon_start_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	struct typhoon *tp = netdev_priv(dev);
+	struct transmit_ring *txRing;
+	struct tx_desc *txd, *first_txd;
+	dma_addr_t skb_dma;
+	int numDesc;
+
+	/* we have two rings to choose from, but we only use txLo for now
+	 * If we start using the Hi ring as well, we'll need to update
+	 * typhoon_stop_runtime(), typhoon_interrupt(), typhoon_num_free_tx(),
+	 * and TXHI_ENTRIES to match, as well as update the TSO code below
+	 * to get the right DMA address
+	 */
+	txRing = &tp->txLoRing;
+
+	/* We need one descriptor for each fragment of the sk_buff, plus the
+	 * one for the ->data area of it.
+	 *
+	 * The docs say a maximum of 16 fragment descriptors per TCP option
+	 * descriptor, then make a new packet descriptor and option descriptor
+	 * for the next 16 fragments. The engineers say just an option
+	 * descriptor is needed. I've tested up to 26 fragments with a single
+	 * packet descriptor/option descriptor combo, so I use that for now.
+	 *
+	 * If problems develop with TSO, check this first.
+	 */
+	numDesc = skb_shinfo(skb)->nr_frags + 1;
+	if (skb_is_gso(skb))
+		numDesc++;
+
+	/* When checking for free space in the ring, we need to also
+	 * account for the initial Tx descriptor, and we always must leave
+	 * at least one descriptor unused in the ring so that it doesn't
+	 * wrap and look empty.
+	 *
+	 * The only time we should loop here is when we hit the race
+	 * between marking the queue awake and updating the cleared index.
+	 * Just loop and it will appear. This comes from the acenic driver.
+	 */
+	while (unlikely(typhoon_num_free_tx(txRing) < (numDesc + 2)))
+		smp_rmb();
+
+	first_txd = (struct tx_desc *) (txRing->ringBase + txRing->lastWrite);
+	typhoon_inc_tx_index(&txRing->lastWrite, 1);
+
+	first_txd->flags = TYPHOON_TX_DESC | TYPHOON_DESC_VALID;
+	first_txd->numDesc = 0;
+	first_txd->len = 0;
+	first_txd->tx_addr = (u64)((unsigned long) skb);
+	first_txd->processFlags = 0;
+
+	if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		/* The 3XP will figure out if this is UDP/TCP */
+		first_txd->processFlags |= TYPHOON_TX_PF_TCP_CHKSUM;
+		first_txd->processFlags |= TYPHOON_TX_PF_UDP_CHKSUM;
+		first_txd->processFlags |= TYPHOON_TX_PF_IP_CHKSUM;
+	}
+
+	if (skb_vlan_tag_present(skb)) {
+		first_txd->processFlags |=
+		    TYPHOON_TX_PF_INSERT_VLAN | TYPHOON_TX_PF_VLAN_PRIORITY;
+		first_txd->processFlags |=
+		    cpu_to_le32(htons(skb_vlan_tag_get(skb)) <<
+				TYPHOON_TX_PF_VLAN_TAG_SHIFT);
+	}
+
+	if (skb_is_gso(skb)) {
+		first_txd->processFlags |= TYPHOON_TX_PF_TCP_SEGMENT;
+		first_txd->numDesc++;
+
+		typhoon_tso_fill(skb, txRing, tp->txlo_dma_addr);
+	}
+
+	txd = (struct tx_desc *) (txRing->ringBase + txRing->lastWrite);
+	typhoon_inc_tx_index(&txRing->lastWrite, 1);
+
+	/* No need to worry about padding packet -- the firmware pads
+	 * it with zeros to ETH_ZLEN for us.
+	 */
+	if (skb_shinfo(skb)->nr_frags == 0) {
+		skb_dma = dma_map_single(&tp->tx_pdev->dev, skb->data,
+					 skb->len, DMA_TO_DEVICE);
+		txd->flags = TYPHOON_FRAG_DESC | TYPHOON_DESC_VALID;
+		txd->len = cpu_to_le16(skb->len);
+		txd->frag.addr = cpu_to_le32(skb_dma);
+		txd->frag.addrHi = 0;
+		first_txd->numDesc++;
+	} else {
+		int i, len;
+
+		len = skb_headlen(skb);
+		skb_dma = dma_map_single(&tp->tx_pdev->dev, skb->data, len,
+					 DMA_TO_DEVICE);
+		txd->flags = TYPHOON_FRAG_DESC | TYPHOON_DESC_VALID;
+		txd->len = cpu_to_le16(len);
+		txd->frag.addr = cpu_to_le32(skb_dma);
+		txd->frag.addrHi = 0;
+		first_txd->numDesc++;
+
+		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+			const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+			void *frag_addr;
+
+			txd = (struct tx_desc *) (txRing->ringBase +
+						txRing->lastWrite);
+			typhoon_inc_tx_index(&txRing->lastWrite, 1);
+
+			len = skb_frag_size(frag);
+			frag_addr = skb_frag_address(frag);
+			skb_dma = dma_map_single(&tp->tx_pdev->dev, frag_addr,
+						 len, DMA_TO_DEVICE);
+			txd->flags = TYPHOON_FRAG_DESC | TYPHOON_DESC_VALID;
+			txd->len = cpu_to_le16(len);
+			txd->frag.addr = cpu_to_le32(skb_dma);
+			txd->frag.addrHi = 0;
+			first_txd->numDesc++;
+		}
+	}
+
+	/* Kick the 3XP
+	 */
+	wmb();
+	iowrite32(txRing->lastWrite, tp->tx_ioaddr + txRing->writeRegister);
+
+	/* If we don't have room to put the worst case packet on the
+	 * queue, then we must stop the queue. We need 2 extra
+	 * descriptors -- one to prevent ring wrap, and one for the
+	 * Tx header.
+	 */
+	numDesc = MAX_SKB_FRAGS + TSO_NUM_DESCRIPTORS + 1;
+
+	if (typhoon_num_free_tx(txRing) < (numDesc + 2)) {
+		netif_stop_queue(dev);
+
+		/* A Tx complete IRQ could have gotten between, making
+		 * the ring free again. Only need to recheck here, since
+		 * Tx is serialized.
+		 */
+		if (typhoon_num_free_tx(txRing) >= (numDesc + 2))
+			netif_wake_queue(dev);
+	}
+
+	return NETDEV_TX_OK;
+}
+
+static void
+typhoon_set_rx_mode(struct net_device *dev)
+{
+	struct typhoon *tp = netdev_priv(dev);
+	struct cmd_desc xp_cmd;
+	u32 mc_filter[2];
+	__le16 filter;
+
+	filter = TYPHOON_RX_FILTER_DIRECTED | TYPHOON_RX_FILTER_BROADCAST;
+	if (dev->flags & IFF_PROMISC) {
+		filter |= TYPHOON_RX_FILTER_PROMISCOUS;
+	} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
+		  (dev->flags & IFF_ALLMULTI)) {
+		/* Too many to match, or accept all multicasts. */
+		filter |= TYPHOON_RX_FILTER_ALL_MCAST;
+	} else if (!netdev_mc_empty(dev)) {
+		struct netdev_hw_addr *ha;
+
+		memset(mc_filter, 0, sizeof(mc_filter));
+		netdev_for_each_mc_addr(ha, dev) {
+			int bit = ether_crc(ETH_ALEN, ha->addr) & 0x3f;
+			mc_filter[bit >> 5] |= 1 << (bit & 0x1f);
+		}
+
+		INIT_COMMAND_NO_RESPONSE(&xp_cmd,
+					 TYPHOON_CMD_SET_MULTICAST_HASH);
+		xp_cmd.parm1 = TYPHOON_MCAST_HASH_SET;
+		xp_cmd.parm2 = cpu_to_le32(mc_filter[0]);
+		xp_cmd.parm3 = cpu_to_le32(mc_filter[1]);
+		typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
+
+		filter |= TYPHOON_RX_FILTER_MCAST_HASH;
+	}
+
+	INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_SET_RX_FILTER);
+	xp_cmd.parm1 = filter;
+	typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
+}
+
+static int
+typhoon_do_get_stats(struct typhoon *tp)
+{
+	struct net_device_stats *stats = &tp->dev->stats;
+	struct net_device_stats *saved = &tp->stats_saved;
+	struct cmd_desc xp_cmd;
+	struct resp_desc xp_resp[7];
+	struct stats_resp *s = (struct stats_resp *) xp_resp;
+	int err;
+
+	INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_STATS);
+	err = typhoon_issue_command(tp, 1, &xp_cmd, 7, xp_resp);
+	if (err < 0)
+		return err;
+
+	/* 3Com's Linux driver uses txMultipleCollisions as it's
+	 * collisions value, but there is some other collision info as well...
+	 *
+	 * The extra status reported would be a good candidate for
+	 * ethtool_ops->get_{strings,stats}()
+	 */
+	stats->tx_packets = le32_to_cpu(s->txPackets) +
+			saved->tx_packets;
+	stats->tx_bytes = le64_to_cpu(s->txBytes) +
+			saved->tx_bytes;
+	stats->tx_errors = le32_to_cpu(s->txCarrierLost) +
+			saved->tx_errors;
+	stats->tx_carrier_errors = le32_to_cpu(s->txCarrierLost) +
+			saved->tx_carrier_errors;
+	stats->collisions = le32_to_cpu(s->txMultipleCollisions) +
+			saved->collisions;
+	stats->rx_packets = le32_to_cpu(s->rxPacketsGood) +
+			saved->rx_packets;
+	stats->rx_bytes = le64_to_cpu(s->rxBytesGood) +
+			saved->rx_bytes;
+	stats->rx_fifo_errors = le32_to_cpu(s->rxFifoOverruns) +
+			saved->rx_fifo_errors;
+	stats->rx_errors = le32_to_cpu(s->rxFifoOverruns) +
+			le32_to_cpu(s->BadSSD) + le32_to_cpu(s->rxCrcErrors) +
+			saved->rx_errors;
+	stats->rx_crc_errors = le32_to_cpu(s->rxCrcErrors) +
+			saved->rx_crc_errors;
+	stats->rx_length_errors = le32_to_cpu(s->rxOversized) +
+			saved->rx_length_errors;
+	tp->speed = (s->linkStatus & TYPHOON_LINK_100MBPS) ?
+			SPEED_100 : SPEED_10;
+	tp->duplex = (s->linkStatus & TYPHOON_LINK_FULL_DUPLEX) ?
+			DUPLEX_FULL : DUPLEX_HALF;
+
+	return 0;
+}
+
+static struct net_device_stats *
+typhoon_get_stats(struct net_device *dev)
+{
+	struct typhoon *tp = netdev_priv(dev);
+	struct net_device_stats *stats = &tp->dev->stats;
+	struct net_device_stats *saved = &tp->stats_saved;
+
+	smp_rmb();
+	if (tp->card_state == Sleeping)
+		return saved;
+
+	if (typhoon_do_get_stats(tp) < 0) {
+		netdev_err(dev, "error getting stats\n");
+		return saved;
+	}
+
+	return stats;
+}
+
+static void
+typhoon_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	struct typhoon *tp = netdev_priv(dev);
+	struct pci_dev *pci_dev = tp->pdev;
+	struct cmd_desc xp_cmd;
+	struct resp_desc xp_resp[3];
+
+	smp_rmb();
+	if (tp->card_state == Sleeping) {
+		strscpy(info->fw_version, "Sleep image",
+			sizeof(info->fw_version));
+	} else {
+		INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_VERSIONS);
+		if (typhoon_issue_command(tp, 1, &xp_cmd, 3, xp_resp) < 0) {
+			strscpy(info->fw_version, "Unknown runtime",
+				sizeof(info->fw_version));
+		} else {
+			u32 sleep_ver = le32_to_cpu(xp_resp[0].parm2);
+			snprintf(info->fw_version, sizeof(info->fw_version),
+				"%02x.%03x.%03x", sleep_ver >> 24,
+				(sleep_ver >> 12) & 0xfff, sleep_ver & 0xfff);
+		}
+	}
+
+	strscpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
+	strscpy(info->bus_info, pci_name(pci_dev), sizeof(info->bus_info));
+}
+
+static int
+typhoon_get_link_ksettings(struct net_device *dev,
+			   struct ethtool_link_ksettings *cmd)
+{
+	struct typhoon *tp = netdev_priv(dev);
+	u32 supported, advertising = 0;
+
+	supported = SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
+				SUPPORTED_Autoneg;
+
+	switch (tp->xcvr_select) {
+	case TYPHOON_XCVR_10HALF:
+		advertising = ADVERTISED_10baseT_Half;
+		break;
+	case TYPHOON_XCVR_10FULL:
+		advertising = ADVERTISED_10baseT_Full;
+		break;
+	case TYPHOON_XCVR_100HALF:
+		advertising = ADVERTISED_100baseT_Half;
+		break;
+	case TYPHOON_XCVR_100FULL:
+		advertising = ADVERTISED_100baseT_Full;
+		break;
+	case TYPHOON_XCVR_AUTONEG:
+		advertising = ADVERTISED_10baseT_Half |
+					    ADVERTISED_10baseT_Full |
+					    ADVERTISED_100baseT_Half |
+					    ADVERTISED_100baseT_Full |
+					    ADVERTISED_Autoneg;
+		break;
+	}
+
+	if (tp->capabilities & TYPHOON_FIBER) {
+		supported |= SUPPORTED_FIBRE;
+		advertising |= ADVERTISED_FIBRE;
+		cmd->base.port = PORT_FIBRE;
+	} else {
+		supported |= SUPPORTED_10baseT_Half |
+		    			SUPPORTED_10baseT_Full |
+					SUPPORTED_TP;
+		advertising |= ADVERTISED_TP;
+		cmd->base.port = PORT_TP;
+	}
+
+	/* need to get stats to make these link speed/duplex valid */
+	typhoon_do_get_stats(tp);
+	cmd->base.speed = tp->speed;
+	cmd->base.duplex = tp->duplex;
+	cmd->base.phy_address = 0;
+	if (tp->xcvr_select == TYPHOON_XCVR_AUTONEG)
+		cmd->base.autoneg = AUTONEG_ENABLE;
+	else
+		cmd->base.autoneg = AUTONEG_DISABLE;
+
+	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+						supported);
+	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+						advertising);
+
+	return 0;
+}
+
+static int
+typhoon_set_link_ksettings(struct net_device *dev,
+			   const struct ethtool_link_ksettings *cmd)
+{
+	struct typhoon *tp = netdev_priv(dev);
+	u32 speed = cmd->base.speed;
+	struct cmd_desc xp_cmd;
+	__le16 xcvr;
+	int err;
+
+	err = -EINVAL;
+	if (cmd->base.autoneg == AUTONEG_ENABLE) {
+		xcvr = TYPHOON_XCVR_AUTONEG;
+	} else {
+		if (cmd->base.duplex == DUPLEX_HALF) {
+			if (speed == SPEED_10)
+				xcvr = TYPHOON_XCVR_10HALF;
+			else if (speed == SPEED_100)
+				xcvr = TYPHOON_XCVR_100HALF;
+			else
+				goto out;
+		} else if (cmd->base.duplex == DUPLEX_FULL) {
+			if (speed == SPEED_10)
+				xcvr = TYPHOON_XCVR_10FULL;
+			else if (speed == SPEED_100)
+				xcvr = TYPHOON_XCVR_100FULL;
+			else
+				goto out;
+		} else
+			goto out;
+	}
+
+	INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_XCVR_SELECT);
+	xp_cmd.parm1 = xcvr;
+	err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
+	if (err < 0)
+		goto out;
+
+	tp->xcvr_select = xcvr;
+	if (cmd->base.autoneg == AUTONEG_ENABLE) {
+		tp->speed = 0xff;	/* invalid */
+		tp->duplex = 0xff;	/* invalid */
+	} else {
+		tp->speed = speed;
+		tp->duplex = cmd->base.duplex;
+	}
+
+out:
+	return err;
+}
+
+static void
+typhoon_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct typhoon *tp = netdev_priv(dev);
+
+	wol->supported = WAKE_PHY | WAKE_MAGIC;
+	wol->wolopts = 0;
+	if (tp->wol_events & TYPHOON_WAKE_LINK_EVENT)
+		wol->wolopts |= WAKE_PHY;
+	if (tp->wol_events & TYPHOON_WAKE_MAGIC_PKT)
+		wol->wolopts |= WAKE_MAGIC;
+	memset(&wol->sopass, 0, sizeof(wol->sopass));
+}
+
+static int
+typhoon_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct typhoon *tp = netdev_priv(dev);
+
+	if (wol->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
+		return -EINVAL;
+
+	tp->wol_events = 0;
+	if (wol->wolopts & WAKE_PHY)
+		tp->wol_events |= TYPHOON_WAKE_LINK_EVENT;
+	if (wol->wolopts & WAKE_MAGIC)
+		tp->wol_events |= TYPHOON_WAKE_MAGIC_PKT;
+
+	return 0;
+}
+
+static void
+typhoon_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ering,
+		      struct kernel_ethtool_ringparam *kernel_ering,
+		      struct netlink_ext_ack *extack)
+{
+	ering->rx_max_pending = RXENT_ENTRIES;
+	ering->tx_max_pending = TXLO_ENTRIES - 1;
+
+	ering->rx_pending = RXENT_ENTRIES;
+	ering->tx_pending = TXLO_ENTRIES - 1;
+}
+
+static const struct ethtool_ops typhoon_ethtool_ops = {
+	.get_drvinfo		= typhoon_get_drvinfo,
+	.get_wol		= typhoon_get_wol,
+	.set_wol		= typhoon_set_wol,
+	.get_link		= ethtool_op_get_link,
+	.get_ringparam		= typhoon_get_ringparam,
+	.get_link_ksettings	= typhoon_get_link_ksettings,
+	.set_link_ksettings	= typhoon_set_link_ksettings,
+};
+
+static int
+typhoon_wait_interrupt(void __iomem *ioaddr)
+{
+	int i, err = 0;
+
+	for (i = 0; i < TYPHOON_WAIT_TIMEOUT; i++) {
+		if (ioread32(ioaddr + TYPHOON_REG_INTR_STATUS) &
+		   TYPHOON_INTR_BOOTCMD)
+			goto out;
+		udelay(TYPHOON_UDELAY);
+	}
+
+	err = -ETIMEDOUT;
+
+out:
+	iowrite32(TYPHOON_INTR_BOOTCMD, ioaddr + TYPHOON_REG_INTR_STATUS);
+	return err;
+}
+
+#define shared_offset(x)	offsetof(struct typhoon_shared, x)
+
+static void
+typhoon_init_interface(struct typhoon *tp)
+{
+	struct typhoon_interface *iface = &tp->shared->iface;
+	dma_addr_t shared_dma;
+
+	memset(tp->shared, 0, sizeof(struct typhoon_shared));
+
+	/* The *Hi members of iface are all init'd to zero by the memset().
+	 */
+	shared_dma = tp->shared_dma + shared_offset(indexes);
+	iface->ringIndex = cpu_to_le32(shared_dma);
+
+	shared_dma = tp->shared_dma + shared_offset(txLo);
+	iface->txLoAddr = cpu_to_le32(shared_dma);
+	iface->txLoSize = cpu_to_le32(TXLO_ENTRIES * sizeof(struct tx_desc));
+
+	shared_dma = tp->shared_dma + shared_offset(txHi);
+	iface->txHiAddr = cpu_to_le32(shared_dma);
+	iface->txHiSize = cpu_to_le32(TXHI_ENTRIES * sizeof(struct tx_desc));
+
+	shared_dma = tp->shared_dma + shared_offset(rxBuff);
+	iface->rxBuffAddr = cpu_to_le32(shared_dma);
+	iface->rxBuffSize = cpu_to_le32(RXFREE_ENTRIES *
+					sizeof(struct rx_free));
+
+	shared_dma = tp->shared_dma + shared_offset(rxLo);
+	iface->rxLoAddr = cpu_to_le32(shared_dma);
+	iface->rxLoSize = cpu_to_le32(RX_ENTRIES * sizeof(struct rx_desc));
+
+	shared_dma = tp->shared_dma + shared_offset(rxHi);
+	iface->rxHiAddr = cpu_to_le32(shared_dma);
+	iface->rxHiSize = cpu_to_le32(RX_ENTRIES * sizeof(struct rx_desc));
+
+	shared_dma = tp->shared_dma + shared_offset(cmd);
+	iface->cmdAddr = cpu_to_le32(shared_dma);
+	iface->cmdSize = cpu_to_le32(COMMAND_RING_SIZE);
+
+	shared_dma = tp->shared_dma + shared_offset(resp);
+	iface->respAddr = cpu_to_le32(shared_dma);
+	iface->respSize = cpu_to_le32(RESPONSE_RING_SIZE);
+
+	shared_dma = tp->shared_dma + shared_offset(zeroWord);
+	iface->zeroAddr = cpu_to_le32(shared_dma);
+
+	tp->indexes = &tp->shared->indexes;
+	tp->txLoRing.ringBase = (u8 *) tp->shared->txLo;
+	tp->txHiRing.ringBase = (u8 *) tp->shared->txHi;
+	tp->rxLoRing.ringBase = (u8 *) tp->shared->rxLo;
+	tp->rxHiRing.ringBase = (u8 *) tp->shared->rxHi;
+	tp->rxBuffRing.ringBase = (u8 *) tp->shared->rxBuff;
+	tp->cmdRing.ringBase = (u8 *) tp->shared->cmd;
+	tp->respRing.ringBase = (u8 *) tp->shared->resp;
+
+	tp->txLoRing.writeRegister = TYPHOON_REG_TX_LO_READY;
+	tp->txHiRing.writeRegister = TYPHOON_REG_TX_HI_READY;
+
+	tp->txlo_dma_addr = le32_to_cpu(iface->txLoAddr);
+	tp->card_state = Sleeping;
+
+	tp->offload = TYPHOON_OFFLOAD_IP_CHKSUM | TYPHOON_OFFLOAD_TCP_CHKSUM;
+	tp->offload |= TYPHOON_OFFLOAD_UDP_CHKSUM | TSO_OFFLOAD_ON;
+	tp->offload |= TYPHOON_OFFLOAD_VLAN;
+
+	spin_lock_init(&tp->command_lock);
+
+	/* Force the writes to the shared memory area out before continuing. */
+	wmb();
+}
+
+static void
+typhoon_init_rings(struct typhoon *tp)
+{
+	memset(tp->indexes, 0, sizeof(struct typhoon_indexes));
+
+	tp->txLoRing.lastWrite = 0;
+	tp->txHiRing.lastWrite = 0;
+	tp->rxLoRing.lastWrite = 0;
+	tp->rxHiRing.lastWrite = 0;
+	tp->rxBuffRing.lastWrite = 0;
+	tp->cmdRing.lastWrite = 0;
+	tp->respRing.lastWrite = 0;
+
+	tp->txLoRing.lastRead = 0;
+	tp->txHiRing.lastRead = 0;
+}
+
+static const struct firmware *typhoon_fw;
+
+static int
+typhoon_request_firmware(struct typhoon *tp)
+{
+	const struct typhoon_file_header *fHdr;
+	const struct typhoon_section_header *sHdr;
+	const u8 *image_data;
+	u32 numSections;
+	u32 section_len;
+	u32 remaining;
+	int err;
+
+	if (typhoon_fw)
+		return 0;
+
+	err = request_firmware(&typhoon_fw, FIRMWARE_NAME, &tp->pdev->dev);
+	if (err) {
+		netdev_err(tp->dev, "Failed to load firmware \"%s\"\n",
+			   FIRMWARE_NAME);
+		return err;
+	}
+
+	image_data = typhoon_fw->data;
+	remaining = typhoon_fw->size;
+	if (remaining < sizeof(struct typhoon_file_header))
+		goto invalid_fw;
+
+	fHdr = (struct typhoon_file_header *) image_data;
+	if (memcmp(fHdr->tag, "TYPHOON", 8))
+		goto invalid_fw;
+
+	numSections = le32_to_cpu(fHdr->numSections);
+	image_data += sizeof(struct typhoon_file_header);
+	remaining -= sizeof(struct typhoon_file_header);
+
+	while (numSections--) {
+		if (remaining < sizeof(struct typhoon_section_header))
+			goto invalid_fw;
+
+		sHdr = (struct typhoon_section_header *) image_data;
+		image_data += sizeof(struct typhoon_section_header);
+		section_len = le32_to_cpu(sHdr->len);
+
+		if (remaining < section_len)
+			goto invalid_fw;
+
+		image_data += section_len;
+		remaining -= section_len;
+	}
+
+	return 0;
+
+invalid_fw:
+	netdev_err(tp->dev, "Invalid firmware image\n");
+	release_firmware(typhoon_fw);
+	typhoon_fw = NULL;
+	return -EINVAL;
+}
+
+static int
+typhoon_download_firmware(struct typhoon *tp)
+{
+	void __iomem *ioaddr = tp->ioaddr;
+	struct pci_dev *pdev = tp->pdev;
+	const struct typhoon_file_header *fHdr;
+	const struct typhoon_section_header *sHdr;
+	const u8 *image_data;
+	void *dpage;
+	dma_addr_t dpage_dma;
+	__sum16 csum;
+	u32 irqEnabled;
+	u32 irqMasked;
+	u32 numSections;
+	u32 section_len;
+	u32 len;
+	u32 load_addr;
+	u32 hmac;
+	int i;
+	int err;
+
+	image_data = typhoon_fw->data;
+	fHdr = (struct typhoon_file_header *) image_data;
+
+	/* Cannot just map the firmware image using dma_map_single() as
+	 * the firmware is vmalloc()'d and may not be physically contiguous,
+	 * so we allocate some coherent memory to copy the sections into.
+	 */
+	err = -ENOMEM;
+	dpage = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, &dpage_dma, GFP_ATOMIC);
+	if (!dpage) {
+		netdev_err(tp->dev, "no DMA mem for firmware\n");
+		goto err_out;
+	}
+
+	irqEnabled = ioread32(ioaddr + TYPHOON_REG_INTR_ENABLE);
+	iowrite32(irqEnabled | TYPHOON_INTR_BOOTCMD,
+	       ioaddr + TYPHOON_REG_INTR_ENABLE);
+	irqMasked = ioread32(ioaddr + TYPHOON_REG_INTR_MASK);
+	iowrite32(irqMasked | TYPHOON_INTR_BOOTCMD,
+	       ioaddr + TYPHOON_REG_INTR_MASK);
+
+	err = -ETIMEDOUT;
+	if (typhoon_wait_status(ioaddr, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) {
+		netdev_err(tp->dev, "card ready timeout\n");
+		goto err_out_irq;
+	}
+
+	numSections = le32_to_cpu(fHdr->numSections);
+	load_addr = le32_to_cpu(fHdr->startAddr);
+
+	iowrite32(TYPHOON_INTR_BOOTCMD, ioaddr + TYPHOON_REG_INTR_STATUS);
+	iowrite32(load_addr, ioaddr + TYPHOON_REG_DOWNLOAD_BOOT_ADDR);
+	hmac = le32_to_cpu(fHdr->hmacDigest[0]);
+	iowrite32(hmac, ioaddr + TYPHOON_REG_DOWNLOAD_HMAC_0);
+	hmac = le32_to_cpu(fHdr->hmacDigest[1]);
+	iowrite32(hmac, ioaddr + TYPHOON_REG_DOWNLOAD_HMAC_1);
+	hmac = le32_to_cpu(fHdr->hmacDigest[2]);
+	iowrite32(hmac, ioaddr + TYPHOON_REG_DOWNLOAD_HMAC_2);
+	hmac = le32_to_cpu(fHdr->hmacDigest[3]);
+	iowrite32(hmac, ioaddr + TYPHOON_REG_DOWNLOAD_HMAC_3);
+	hmac = le32_to_cpu(fHdr->hmacDigest[4]);
+	iowrite32(hmac, ioaddr + TYPHOON_REG_DOWNLOAD_HMAC_4);
+	typhoon_post_pci_writes(ioaddr);
+	iowrite32(TYPHOON_BOOTCMD_RUNTIME_IMAGE, ioaddr + TYPHOON_REG_COMMAND);
+
+	image_data += sizeof(struct typhoon_file_header);
+
+	/* The ioread32() in typhoon_wait_interrupt() will force the
+	 * last write to the command register to post, so
+	 * we don't need a typhoon_post_pci_writes() after it.
+	 */
+	for (i = 0; i < numSections; i++) {
+		sHdr = (struct typhoon_section_header *) image_data;
+		image_data += sizeof(struct typhoon_section_header);
+		load_addr = le32_to_cpu(sHdr->startAddr);
+		section_len = le32_to_cpu(sHdr->len);
+
+		while (section_len) {
+			len = min_t(u32, section_len, PAGE_SIZE);
+
+			if (typhoon_wait_interrupt(ioaddr) < 0 ||
+			   ioread32(ioaddr + TYPHOON_REG_STATUS) !=
+			   TYPHOON_STATUS_WAITING_FOR_SEGMENT) {
+				netdev_err(tp->dev, "segment ready timeout\n");
+				goto err_out_irq;
+			}
+
+			/* Do an pseudo IPv4 checksum on the data -- first
+			 * need to convert each u16 to cpu order before
+			 * summing. Fortunately, due to the properties of
+			 * the checksum, we can do this once, at the end.
+			 */
+			csum = csum_fold(csum_partial_copy_nocheck(image_data,
+								   dpage, len));
+
+			iowrite32(len, ioaddr + TYPHOON_REG_BOOT_LENGTH);
+			iowrite32(le16_to_cpu((__force __le16)csum),
+					ioaddr + TYPHOON_REG_BOOT_CHECKSUM);
+			iowrite32(load_addr,
+					ioaddr + TYPHOON_REG_BOOT_DEST_ADDR);
+			iowrite32(0, ioaddr + TYPHOON_REG_BOOT_DATA_HI);
+			iowrite32(dpage_dma, ioaddr + TYPHOON_REG_BOOT_DATA_LO);
+			typhoon_post_pci_writes(ioaddr);
+			iowrite32(TYPHOON_BOOTCMD_SEG_AVAILABLE,
+					ioaddr + TYPHOON_REG_COMMAND);
+
+			image_data += len;
+			load_addr += len;
+			section_len -= len;
+		}
+	}
+
+	if (typhoon_wait_interrupt(ioaddr) < 0 ||
+	   ioread32(ioaddr + TYPHOON_REG_STATUS) !=
+	   TYPHOON_STATUS_WAITING_FOR_SEGMENT) {
+		netdev_err(tp->dev, "final segment ready timeout\n");
+		goto err_out_irq;
+	}
+
+	iowrite32(TYPHOON_BOOTCMD_DNLD_COMPLETE, ioaddr + TYPHOON_REG_COMMAND);
+
+	if (typhoon_wait_status(ioaddr, TYPHOON_STATUS_WAITING_FOR_BOOT) < 0) {
+		netdev_err(tp->dev, "boot ready timeout, status 0x%0x\n",
+			   ioread32(ioaddr + TYPHOON_REG_STATUS));
+		goto err_out_irq;
+	}
+
+	err = 0;
+
+err_out_irq:
+	iowrite32(irqMasked, ioaddr + TYPHOON_REG_INTR_MASK);
+	iowrite32(irqEnabled, ioaddr + TYPHOON_REG_INTR_ENABLE);
+
+	dma_free_coherent(&pdev->dev, PAGE_SIZE, dpage, dpage_dma);
+
+err_out:
+	return err;
+}
+
+static int
+typhoon_boot_3XP(struct typhoon *tp, u32 initial_status)
+{
+	void __iomem *ioaddr = tp->ioaddr;
+
+	if (typhoon_wait_status(ioaddr, initial_status) < 0) {
+		netdev_err(tp->dev, "boot ready timeout\n");
+		goto out_timeout;
+	}
+
+	iowrite32(0, ioaddr + TYPHOON_REG_BOOT_RECORD_ADDR_HI);
+	iowrite32(tp->shared_dma, ioaddr + TYPHOON_REG_BOOT_RECORD_ADDR_LO);
+	typhoon_post_pci_writes(ioaddr);
+	iowrite32(TYPHOON_BOOTCMD_REG_BOOT_RECORD,
+				ioaddr + TYPHOON_REG_COMMAND);
+
+	if (typhoon_wait_status(ioaddr, TYPHOON_STATUS_RUNNING) < 0) {
+		netdev_err(tp->dev, "boot finish timeout (status 0x%x)\n",
+			   ioread32(ioaddr + TYPHOON_REG_STATUS));
+		goto out_timeout;
+	}
+
+	/* Clear the Transmit and Command ready registers
+	 */
+	iowrite32(0, ioaddr + TYPHOON_REG_TX_HI_READY);
+	iowrite32(0, ioaddr + TYPHOON_REG_CMD_READY);
+	iowrite32(0, ioaddr + TYPHOON_REG_TX_LO_READY);
+	typhoon_post_pci_writes(ioaddr);
+	iowrite32(TYPHOON_BOOTCMD_BOOT, ioaddr + TYPHOON_REG_COMMAND);
+
+	return 0;
+
+out_timeout:
+	return -ETIMEDOUT;
+}
+
+static u32
+typhoon_clean_tx(struct typhoon *tp, struct transmit_ring *txRing,
+			volatile __le32 * index)
+{
+	u32 lastRead = txRing->lastRead;
+	struct tx_desc *tx;
+	dma_addr_t skb_dma;
+	int dma_len;
+	int type;
+
+	while (lastRead != le32_to_cpu(*index)) {
+		tx = (struct tx_desc *) (txRing->ringBase + lastRead);
+		type = tx->flags & TYPHOON_TYPE_MASK;
+
+		if (type == TYPHOON_TX_DESC) {
+			/* This tx_desc describes a packet.
+			 */
+			unsigned long ptr = tx->tx_addr;
+			struct sk_buff *skb = (struct sk_buff *) ptr;
+			dev_kfree_skb_irq(skb);
+		} else if (type == TYPHOON_FRAG_DESC) {
+			/* This tx_desc describes a memory mapping. Free it.
+			 */
+			skb_dma = (dma_addr_t) le32_to_cpu(tx->frag.addr);
+			dma_len = le16_to_cpu(tx->len);
+			dma_unmap_single(&tp->pdev->dev, skb_dma, dma_len,
+					 DMA_TO_DEVICE);
+		}
+
+		tx->flags = 0;
+		typhoon_inc_tx_index(&lastRead, 1);
+	}
+
+	return lastRead;
+}
+
+static void
+typhoon_tx_complete(struct typhoon *tp, struct transmit_ring *txRing,
+			volatile __le32 * index)
+{
+	u32 lastRead;
+	int numDesc = MAX_SKB_FRAGS + 1;
+
+	/* This will need changing if we start to use the Hi Tx ring. */
+	lastRead = typhoon_clean_tx(tp, txRing, index);
+	if (netif_queue_stopped(tp->dev) && typhoon_num_free(txRing->lastWrite,
+				lastRead, TXLO_ENTRIES) > (numDesc + 2))
+		netif_wake_queue(tp->dev);
+
+	txRing->lastRead = lastRead;
+	smp_wmb();
+}
+
+static void
+typhoon_recycle_rx_skb(struct typhoon *tp, u32 idx)
+{
+	struct typhoon_indexes *indexes = tp->indexes;
+	struct rxbuff_ent *rxb = &tp->rxbuffers[idx];
+	struct basic_ring *ring = &tp->rxBuffRing;
+	struct rx_free *r;
+
+	if ((ring->lastWrite + sizeof(*r)) % (RXFREE_ENTRIES * sizeof(*r)) ==
+				le32_to_cpu(indexes->rxBuffCleared)) {
+		/* no room in ring, just drop the skb
+		 */
+		dev_kfree_skb_any(rxb->skb);
+		rxb->skb = NULL;
+		return;
+	}
+
+	r = (struct rx_free *) (ring->ringBase + ring->lastWrite);
+	typhoon_inc_rxfree_index(&ring->lastWrite, 1);
+	r->virtAddr = idx;
+	r->physAddr = cpu_to_le32(rxb->dma_addr);
+
+	/* Tell the card about it */
+	wmb();
+	indexes->rxBuffReady = cpu_to_le32(ring->lastWrite);
+}
+
+static int
+typhoon_alloc_rx_skb(struct typhoon *tp, u32 idx)
+{
+	struct typhoon_indexes *indexes = tp->indexes;
+	struct rxbuff_ent *rxb = &tp->rxbuffers[idx];
+	struct basic_ring *ring = &tp->rxBuffRing;
+	struct rx_free *r;
+	struct sk_buff *skb;
+	dma_addr_t dma_addr;
+
+	rxb->skb = NULL;
+
+	if ((ring->lastWrite + sizeof(*r)) % (RXFREE_ENTRIES * sizeof(*r)) ==
+				le32_to_cpu(indexes->rxBuffCleared))
+		return -ENOMEM;
+
+	skb = netdev_alloc_skb(tp->dev, PKT_BUF_SZ);
+	if (!skb)
+		return -ENOMEM;
+
+#if 0
+	/* Please, 3com, fix the firmware to allow DMA to a unaligned
+	 * address! Pretty please?
+	 */
+	skb_reserve(skb, 2);
+#endif
+
+	dma_addr = dma_map_single(&tp->pdev->dev, skb->data, PKT_BUF_SZ,
+				  DMA_FROM_DEVICE);
+
+	/* Since no card does 64 bit DAC, the high bits will never
+	 * change from zero.
+	 */
+	r = (struct rx_free *) (ring->ringBase + ring->lastWrite);
+	typhoon_inc_rxfree_index(&ring->lastWrite, 1);
+	r->virtAddr = idx;
+	r->physAddr = cpu_to_le32(dma_addr);
+	rxb->skb = skb;
+	rxb->dma_addr = dma_addr;
+
+	/* Tell the card about it */
+	wmb();
+	indexes->rxBuffReady = cpu_to_le32(ring->lastWrite);
+	return 0;
+}
+
+static int
+typhoon_rx(struct typhoon *tp, struct basic_ring *rxRing, volatile __le32 * ready,
+	   volatile __le32 * cleared, int budget)
+{
+	struct rx_desc *rx;
+	struct sk_buff *skb, *new_skb;
+	struct rxbuff_ent *rxb;
+	dma_addr_t dma_addr;
+	u32 local_ready;
+	u32 rxaddr;
+	int pkt_len;
+	u32 idx;
+	__le32 csum_bits;
+	int received;
+
+	received = 0;
+	local_ready = le32_to_cpu(*ready);
+	rxaddr = le32_to_cpu(*cleared);
+	while (rxaddr != local_ready && budget > 0) {
+		rx = (struct rx_desc *) (rxRing->ringBase + rxaddr);
+		idx = rx->addr;
+		rxb = &tp->rxbuffers[idx];
+		skb = rxb->skb;
+		dma_addr = rxb->dma_addr;
+
+		typhoon_inc_rx_index(&rxaddr, 1);
+
+		if (rx->flags & TYPHOON_RX_ERROR) {
+			typhoon_recycle_rx_skb(tp, idx);
+			continue;
+		}
+
+		pkt_len = le16_to_cpu(rx->frameLen);
+
+		if (pkt_len < rx_copybreak &&
+		   (new_skb = netdev_alloc_skb(tp->dev, pkt_len + 2)) != NULL) {
+			skb_reserve(new_skb, 2);
+			dma_sync_single_for_cpu(&tp->pdev->dev, dma_addr,
+						PKT_BUF_SZ, DMA_FROM_DEVICE);
+			skb_copy_to_linear_data(new_skb, skb->data, pkt_len);
+			dma_sync_single_for_device(&tp->pdev->dev, dma_addr,
+						   PKT_BUF_SZ,
+						   DMA_FROM_DEVICE);
+			skb_put(new_skb, pkt_len);
+			typhoon_recycle_rx_skb(tp, idx);
+		} else {
+			new_skb = skb;
+			skb_put(new_skb, pkt_len);
+			dma_unmap_single(&tp->pdev->dev, dma_addr, PKT_BUF_SZ,
+					 DMA_FROM_DEVICE);
+			typhoon_alloc_rx_skb(tp, idx);
+		}
+		new_skb->protocol = eth_type_trans(new_skb, tp->dev);
+		csum_bits = rx->rxStatus & (TYPHOON_RX_IP_CHK_GOOD |
+			TYPHOON_RX_UDP_CHK_GOOD | TYPHOON_RX_TCP_CHK_GOOD);
+		if (csum_bits ==
+		   (TYPHOON_RX_IP_CHK_GOOD | TYPHOON_RX_TCP_CHK_GOOD) ||
+		   csum_bits ==
+		   (TYPHOON_RX_IP_CHK_GOOD | TYPHOON_RX_UDP_CHK_GOOD)) {
+			new_skb->ip_summed = CHECKSUM_UNNECESSARY;
+		} else
+			skb_checksum_none_assert(new_skb);
+
+		if (rx->rxStatus & TYPHOON_RX_VLAN)
+			__vlan_hwaccel_put_tag(new_skb, htons(ETH_P_8021Q),
+					       ntohl(rx->vlanTag) & 0xffff);
+		netif_receive_skb(new_skb);
+
+		received++;
+		budget--;
+	}
+	*cleared = cpu_to_le32(rxaddr);
+
+	return received;
+}
+
+static void
+typhoon_fill_free_ring(struct typhoon *tp)
+{
+	u32 i;
+
+	for (i = 0; i < RXENT_ENTRIES; i++) {
+		struct rxbuff_ent *rxb = &tp->rxbuffers[i];
+		if (rxb->skb)
+			continue;
+		if (typhoon_alloc_rx_skb(tp, i) < 0)
+			break;
+	}
+}
+
+static int
+typhoon_poll(struct napi_struct *napi, int budget)
+{
+	struct typhoon *tp = container_of(napi, struct typhoon, napi);
+	struct typhoon_indexes *indexes = tp->indexes;
+	int work_done;
+
+	rmb();
+	if (!tp->awaiting_resp && indexes->respReady != indexes->respCleared)
+			typhoon_process_response(tp, 0, NULL);
+
+	if (le32_to_cpu(indexes->txLoCleared) != tp->txLoRing.lastRead)
+		typhoon_tx_complete(tp, &tp->txLoRing, &indexes->txLoCleared);
+
+	work_done = 0;
+
+	if (indexes->rxHiCleared != indexes->rxHiReady) {
+		work_done += typhoon_rx(tp, &tp->rxHiRing, &indexes->rxHiReady,
+			   		&indexes->rxHiCleared, budget);
+	}
+
+	if (indexes->rxLoCleared != indexes->rxLoReady) {
+		work_done += typhoon_rx(tp, &tp->rxLoRing, &indexes->rxLoReady,
+					&indexes->rxLoCleared, budget - work_done);
+	}
+
+	if (le32_to_cpu(indexes->rxBuffCleared) == tp->rxBuffRing.lastWrite) {
+		/* rxBuff ring is empty, try to fill it. */
+		typhoon_fill_free_ring(tp);
+	}
+
+	if (work_done < budget) {
+		napi_complete_done(napi, work_done);
+		iowrite32(TYPHOON_INTR_NONE,
+				tp->ioaddr + TYPHOON_REG_INTR_MASK);
+		typhoon_post_pci_writes(tp->ioaddr);
+	}
+
+	return work_done;
+}
+
+static irqreturn_t
+typhoon_interrupt(int irq, void *dev_instance)
+{
+	struct net_device *dev = dev_instance;
+	struct typhoon *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->ioaddr;
+	u32 intr_status;
+
+	intr_status = ioread32(ioaddr + TYPHOON_REG_INTR_STATUS);
+	if (!(intr_status & TYPHOON_INTR_HOST_INT))
+		return IRQ_NONE;
+
+	iowrite32(intr_status, ioaddr + TYPHOON_REG_INTR_STATUS);
+
+	if (napi_schedule_prep(&tp->napi)) {
+		iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_MASK);
+		typhoon_post_pci_writes(ioaddr);
+		__napi_schedule(&tp->napi);
+	} else {
+		netdev_err(dev, "Error, poll already scheduled\n");
+	}
+	return IRQ_HANDLED;
+}
+
+static void
+typhoon_free_rx_rings(struct typhoon *tp)
+{
+	u32 i;
+
+	for (i = 0; i < RXENT_ENTRIES; i++) {
+		struct rxbuff_ent *rxb = &tp->rxbuffers[i];
+		if (rxb->skb) {
+			dma_unmap_single(&tp->pdev->dev, rxb->dma_addr,
+					 PKT_BUF_SZ, DMA_FROM_DEVICE);
+			dev_kfree_skb(rxb->skb);
+			rxb->skb = NULL;
+		}
+	}
+}
+
+static int
+typhoon_sleep_early(struct typhoon *tp, __le16 events)
+{
+	void __iomem *ioaddr = tp->ioaddr;
+	struct cmd_desc xp_cmd;
+	int err;
+
+	INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_ENABLE_WAKE_EVENTS);
+	xp_cmd.parm1 = events;
+	err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
+	if (err < 0) {
+		netdev_err(tp->dev, "typhoon_sleep(): wake events cmd err %d\n",
+			   err);
+		return err;
+	}
+
+	INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_GOTO_SLEEP);
+	err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
+	if (err < 0) {
+		netdev_err(tp->dev, "typhoon_sleep(): sleep cmd err %d\n", err);
+		return err;
+	}
+
+	if (typhoon_wait_status(ioaddr, TYPHOON_STATUS_SLEEPING) < 0)
+		return -ETIMEDOUT;
+
+	/* Since we cannot monitor the status of the link while sleeping,
+	 * tell the world it went away.
+	 */
+	netif_carrier_off(tp->dev);
+
+	return 0;
+}
+
+static int
+typhoon_sleep(struct typhoon *tp, pci_power_t state, __le16 events)
+{
+	int err;
+
+	err = typhoon_sleep_early(tp, events);
+
+	if (err)
+		return err;
+
+	pci_enable_wake(tp->pdev, state, 1);
+	pci_disable_device(tp->pdev);
+	return pci_set_power_state(tp->pdev, state);
+}
+
+static int
+typhoon_wakeup(struct typhoon *tp, int wait_type)
+{
+	void __iomem *ioaddr = tp->ioaddr;
+
+	/* Post 2.x.x versions of the Sleep Image require a reset before
+	 * we can download the Runtime Image. But let's not make users of
+	 * the old firmware pay for the reset.
+	 */
+	iowrite32(TYPHOON_BOOTCMD_WAKEUP, ioaddr + TYPHOON_REG_COMMAND);
+	if (typhoon_wait_status(ioaddr, TYPHOON_STATUS_WAITING_FOR_HOST) < 0 ||
+			(tp->capabilities & TYPHOON_WAKEUP_NEEDS_RESET))
+		return typhoon_reset(ioaddr, wait_type);
+
+	return 0;
+}
+
+static int
+typhoon_start_runtime(struct typhoon *tp)
+{
+	struct net_device *dev = tp->dev;
+	void __iomem *ioaddr = tp->ioaddr;
+	struct cmd_desc xp_cmd;
+	int err;
+
+	typhoon_init_rings(tp);
+	typhoon_fill_free_ring(tp);
+
+	err = typhoon_download_firmware(tp);
+	if (err < 0) {
+		netdev_err(tp->dev, "cannot load runtime on 3XP\n");
+		goto error_out;
+	}
+
+	if (typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_BOOT) < 0) {
+		netdev_err(tp->dev, "cannot boot 3XP\n");
+		err = -EIO;
+		goto error_out;
+	}
+
+	INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_SET_MAX_PKT_SIZE);
+	xp_cmd.parm1 = cpu_to_le16(PKT_BUF_SZ);
+	err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
+	if (err < 0)
+		goto error_out;
+
+	INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_SET_MAC_ADDRESS);
+	xp_cmd.parm1 = cpu_to_le16(ntohs(*(__be16 *)&dev->dev_addr[0]));
+	xp_cmd.parm2 = cpu_to_le32(ntohl(*(__be32 *)&dev->dev_addr[2]));
+	err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
+	if (err < 0)
+		goto error_out;
+
+	/* Disable IRQ coalescing -- we can reenable it when 3Com gives
+	 * us some more information on how to control it.
+	 */
+	INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_IRQ_COALESCE_CTRL);
+	xp_cmd.parm1 = 0;
+	err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
+	if (err < 0)
+		goto error_out;
+
+	INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_XCVR_SELECT);
+	xp_cmd.parm1 = tp->xcvr_select;
+	err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
+	if (err < 0)
+		goto error_out;
+
+	INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_VLAN_TYPE_WRITE);
+	xp_cmd.parm1 = cpu_to_le16(ETH_P_8021Q);
+	err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
+	if (err < 0)
+		goto error_out;
+
+	INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_SET_OFFLOAD_TASKS);
+	xp_cmd.parm2 = tp->offload;
+	xp_cmd.parm3 = tp->offload;
+	err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
+	if (err < 0)
+		goto error_out;
+
+	typhoon_set_rx_mode(dev);
+
+	INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_TX_ENABLE);
+	err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
+	if (err < 0)
+		goto error_out;
+
+	INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_RX_ENABLE);
+	err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
+	if (err < 0)
+		goto error_out;
+
+	tp->card_state = Running;
+	smp_wmb();
+
+	iowrite32(TYPHOON_INTR_ENABLE_ALL, ioaddr + TYPHOON_REG_INTR_ENABLE);
+	iowrite32(TYPHOON_INTR_NONE, ioaddr + TYPHOON_REG_INTR_MASK);
+	typhoon_post_pci_writes(ioaddr);
+
+	return 0;
+
+error_out:
+	typhoon_reset(ioaddr, WaitNoSleep);
+	typhoon_free_rx_rings(tp);
+	typhoon_init_rings(tp);
+	return err;
+}
+
+static int
+typhoon_stop_runtime(struct typhoon *tp, int wait_type)
+{
+	struct typhoon_indexes *indexes = tp->indexes;
+	struct transmit_ring *txLo = &tp->txLoRing;
+	void __iomem *ioaddr = tp->ioaddr;
+	struct cmd_desc xp_cmd;
+	int i;
+
+	/* Disable interrupts early, since we can't schedule a poll
+	 * when called with !netif_running(). This will be posted
+	 * when we force the posting of the command.
+	 */
+	iowrite32(TYPHOON_INTR_NONE, ioaddr + TYPHOON_REG_INTR_ENABLE);
+
+	INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_RX_DISABLE);
+	typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
+
+	/* Wait 1/2 sec for any outstanding transmits to occur
+	 * We'll cleanup after the reset if this times out.
+	 */
+	for (i = 0; i < TYPHOON_WAIT_TIMEOUT; i++) {
+		if (indexes->txLoCleared == cpu_to_le32(txLo->lastWrite))
+			break;
+		udelay(TYPHOON_UDELAY);
+	}
+
+	if (i == TYPHOON_WAIT_TIMEOUT)
+		netdev_err(tp->dev, "halt timed out waiting for Tx to complete\n");
+
+	INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_TX_DISABLE);
+	typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
+
+	/* save the statistics so when we bring the interface up again,
+	 * the values reported to userspace are correct.
+	 */
+	tp->card_state = Sleeping;
+	smp_wmb();
+	typhoon_do_get_stats(tp);
+	memcpy(&tp->stats_saved, &tp->dev->stats, sizeof(struct net_device_stats));
+
+	INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_HALT);
+	typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
+
+	if (typhoon_wait_status(ioaddr, TYPHOON_STATUS_HALTED) < 0)
+		netdev_err(tp->dev, "timed out waiting for 3XP to halt\n");
+
+	if (typhoon_reset(ioaddr, wait_type) < 0) {
+		netdev_err(tp->dev, "unable to reset 3XP\n");
+		return -ETIMEDOUT;
+	}
+
+	/* cleanup any outstanding Tx packets */
+	if (indexes->txLoCleared != cpu_to_le32(txLo->lastWrite)) {
+		indexes->txLoCleared = cpu_to_le32(txLo->lastWrite);
+		typhoon_clean_tx(tp, &tp->txLoRing, &indexes->txLoCleared);
+	}
+
+	return 0;
+}
+
+static void
+typhoon_tx_timeout(struct net_device *dev, unsigned int txqueue)
+{
+	struct typhoon *tp = netdev_priv(dev);
+
+	if (typhoon_reset(tp->ioaddr, WaitNoSleep) < 0) {
+		netdev_warn(dev, "could not reset in tx timeout\n");
+		goto truly_dead;
+	}
+
+	/* If we ever start using the Hi ring, it will need cleaning too */
+	typhoon_clean_tx(tp, &tp->txLoRing, &tp->indexes->txLoCleared);
+	typhoon_free_rx_rings(tp);
+
+	if (typhoon_start_runtime(tp) < 0) {
+		netdev_err(dev, "could not start runtime in tx timeout\n");
+		goto truly_dead;
+        }
+
+	netif_wake_queue(dev);
+	return;
+
+truly_dead:
+	/* Reset the hardware, and turn off carrier to avoid more timeouts */
+	typhoon_reset(tp->ioaddr, NoWait);
+	netif_carrier_off(dev);
+}
+
+static int
+typhoon_open(struct net_device *dev)
+{
+	struct typhoon *tp = netdev_priv(dev);
+	int err;
+
+	err = typhoon_request_firmware(tp);
+	if (err)
+		goto out;
+
+	pci_set_power_state(tp->pdev, PCI_D0);
+	pci_restore_state(tp->pdev);
+
+	err = typhoon_wakeup(tp, WaitSleep);
+	if (err < 0) {
+		netdev_err(dev, "unable to wakeup device\n");
+		goto out_sleep;
+	}
+
+	err = request_irq(dev->irq, typhoon_interrupt, IRQF_SHARED,
+				dev->name, dev);
+	if (err < 0)
+		goto out_sleep;
+
+	napi_enable(&tp->napi);
+
+	err = typhoon_start_runtime(tp);
+	if (err < 0) {
+		napi_disable(&tp->napi);
+		goto out_irq;
+	}
+
+	netif_start_queue(dev);
+	return 0;
+
+out_irq:
+	free_irq(dev->irq, dev);
+
+out_sleep:
+	if (typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) {
+		netdev_err(dev, "unable to reboot into sleep img\n");
+		typhoon_reset(tp->ioaddr, NoWait);
+		goto out;
+	}
+
+	if (typhoon_sleep(tp, PCI_D3hot, 0) < 0)
+		netdev_err(dev, "unable to go back to sleep\n");
+
+out:
+	return err;
+}
+
+static int
+typhoon_close(struct net_device *dev)
+{
+	struct typhoon *tp = netdev_priv(dev);
+
+	netif_stop_queue(dev);
+	napi_disable(&tp->napi);
+
+	if (typhoon_stop_runtime(tp, WaitSleep) < 0)
+		netdev_err(dev, "unable to stop runtime\n");
+
+	/* Make sure there is no irq handler running on a different CPU. */
+	free_irq(dev->irq, dev);
+
+	typhoon_free_rx_rings(tp);
+	typhoon_init_rings(tp);
+
+	if (typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0)
+		netdev_err(dev, "unable to boot sleep image\n");
+
+	if (typhoon_sleep(tp, PCI_D3hot, 0) < 0)
+		netdev_err(dev, "unable to put card to sleep\n");
+
+	return 0;
+}
+
+static int __maybe_unused
+typhoon_resume(struct device *dev_d)
+{
+	struct net_device *dev = dev_get_drvdata(dev_d);
+	struct typhoon *tp = netdev_priv(dev);
+
+	/* If we're down, resume when we are upped.
+	 */
+	if (!netif_running(dev))
+		return 0;
+
+	if (typhoon_wakeup(tp, WaitNoSleep) < 0) {
+		netdev_err(dev, "critical: could not wake up in resume\n");
+		goto reset;
+	}
+
+	if (typhoon_start_runtime(tp) < 0) {
+		netdev_err(dev, "critical: could not start runtime in resume\n");
+		goto reset;
+	}
+
+	netif_device_attach(dev);
+	return 0;
+
+reset:
+	typhoon_reset(tp->ioaddr, NoWait);
+	return -EBUSY;
+}
+
+static int __maybe_unused
+typhoon_suspend(struct device *dev_d)
+{
+	struct pci_dev *pdev = to_pci_dev(dev_d);
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct typhoon *tp = netdev_priv(dev);
+	struct cmd_desc xp_cmd;
+
+	/* If we're down, we're already suspended.
+	 */
+	if (!netif_running(dev))
+		return 0;
+
+	/* TYPHOON_OFFLOAD_VLAN is always on now, so this doesn't work */
+	if (tp->wol_events & TYPHOON_WAKE_MAGIC_PKT)
+		netdev_warn(dev, "cannot do WAKE_MAGIC with VLAN offloading\n");
+
+	netif_device_detach(dev);
+
+	if (typhoon_stop_runtime(tp, WaitNoSleep) < 0) {
+		netdev_err(dev, "unable to stop runtime\n");
+		goto need_resume;
+	}
+
+	typhoon_free_rx_rings(tp);
+	typhoon_init_rings(tp);
+
+	if (typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) {
+		netdev_err(dev, "unable to boot sleep image\n");
+		goto need_resume;
+	}
+
+	INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_SET_MAC_ADDRESS);
+	xp_cmd.parm1 = cpu_to_le16(ntohs(*(__be16 *)&dev->dev_addr[0]));
+	xp_cmd.parm2 = cpu_to_le32(ntohl(*(__be32 *)&dev->dev_addr[2]));
+	if (typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL) < 0) {
+		netdev_err(dev, "unable to set mac address in suspend\n");
+		goto need_resume;
+	}
+
+	INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_SET_RX_FILTER);
+	xp_cmd.parm1 = TYPHOON_RX_FILTER_DIRECTED | TYPHOON_RX_FILTER_BROADCAST;
+	if (typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL) < 0) {
+		netdev_err(dev, "unable to set rx filter in suspend\n");
+		goto need_resume;
+	}
+
+	if (typhoon_sleep_early(tp, tp->wol_events) < 0) {
+		netdev_err(dev, "unable to put card to sleep\n");
+		goto need_resume;
+	}
+
+	device_wakeup_enable(dev_d);
+
+	return 0;
+
+need_resume:
+	typhoon_resume(dev_d);
+	return -EBUSY;
+}
+
+static int
+typhoon_test_mmio(struct pci_dev *pdev)
+{
+	void __iomem *ioaddr = pci_iomap(pdev, 1, 128);
+	int mode = 0;
+	u32 val;
+
+	if (!ioaddr)
+		goto out;
+
+	if (ioread32(ioaddr + TYPHOON_REG_STATUS) !=
+				TYPHOON_STATUS_WAITING_FOR_HOST)
+		goto out_unmap;
+
+	iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_MASK);
+	iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_STATUS);
+	iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_ENABLE);
+
+	/* Ok, see if we can change our interrupt status register by
+	 * sending ourselves an interrupt. If so, then MMIO works.
+	 * The 50usec delay is arbitrary -- it could probably be smaller.
+	 */
+	val = ioread32(ioaddr + TYPHOON_REG_INTR_STATUS);
+	if ((val & TYPHOON_INTR_SELF) == 0) {
+		iowrite32(1, ioaddr + TYPHOON_REG_SELF_INTERRUPT);
+		ioread32(ioaddr + TYPHOON_REG_INTR_STATUS);
+		udelay(50);
+		val = ioread32(ioaddr + TYPHOON_REG_INTR_STATUS);
+		if (val & TYPHOON_INTR_SELF)
+			mode = 1;
+	}
+
+	iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_MASK);
+	iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_STATUS);
+	iowrite32(TYPHOON_INTR_NONE, ioaddr + TYPHOON_REG_INTR_ENABLE);
+	ioread32(ioaddr + TYPHOON_REG_INTR_STATUS);
+
+out_unmap:
+	pci_iounmap(pdev, ioaddr);
+
+out:
+	if (!mode)
+		pr_info("%s: falling back to port IO\n", pci_name(pdev));
+	return mode;
+}
+
+#if MAX_SKB_FRAGS > 32
+
+#include <net/vxlan.h>
+
+static netdev_features_t typhoon_features_check(struct sk_buff *skb,
+						struct net_device *dev,
+						netdev_features_t features)
+{
+	if (skb_shinfo(skb)->nr_frags > 32 && skb_is_gso(skb))
+		features &= ~NETIF_F_GSO_MASK;
+
+	features = vlan_features_check(skb, features);
+	return vxlan_features_check(skb, features);
+}
+#endif
+
+static const struct net_device_ops typhoon_netdev_ops = {
+	.ndo_open		= typhoon_open,
+	.ndo_stop		= typhoon_close,
+#if MAX_SKB_FRAGS > 32
+	.ndo_features_check	= typhoon_features_check,
+#endif
+	.ndo_start_xmit		= typhoon_start_tx,
+	.ndo_set_rx_mode	= typhoon_set_rx_mode,
+	.ndo_tx_timeout		= typhoon_tx_timeout,
+	.ndo_get_stats		= typhoon_get_stats,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
+static int
+typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct net_device *dev;
+	struct typhoon *tp;
+	int card_id = (int) ent->driver_data;
+	u8 addr[ETH_ALEN] __aligned(4);
+	void __iomem *ioaddr;
+	void *shared;
+	dma_addr_t shared_dma;
+	struct cmd_desc xp_cmd;
+	struct resp_desc xp_resp[3];
+	int err = 0;
+	const char *err_msg;
+
+	dev = alloc_etherdev(sizeof(*tp));
+	if (dev == NULL) {
+		err_msg = "unable to alloc new net device";
+		err = -ENOMEM;
+		goto error_out;
+	}
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	err = pci_enable_device(pdev);
+	if (err < 0) {
+		err_msg = "unable to enable device";
+		goto error_out_dev;
+	}
+
+	err = pci_set_mwi(pdev);
+	if (err < 0) {
+		err_msg = "unable to set MWI";
+		goto error_out_disable;
+	}
+
+	err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+	if (err < 0) {
+		err_msg = "No usable DMA configuration";
+		goto error_out_mwi;
+	}
+
+	/* sanity checks on IO and MMIO BARs
+	 */
+	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) {
+		err_msg = "region #1 not a PCI IO resource, aborting";
+		err = -ENODEV;
+		goto error_out_mwi;
+	}
+	if (pci_resource_len(pdev, 0) < 128) {
+		err_msg = "Invalid PCI IO region size, aborting";
+		err = -ENODEV;
+		goto error_out_mwi;
+	}
+	if (!(pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
+		err_msg = "region #1 not a PCI MMIO resource, aborting";
+		err = -ENODEV;
+		goto error_out_mwi;
+	}
+	if (pci_resource_len(pdev, 1) < 128) {
+		err_msg = "Invalid PCI MMIO region size, aborting";
+		err = -ENODEV;
+		goto error_out_mwi;
+	}
+
+	err = pci_request_regions(pdev, KBUILD_MODNAME);
+	if (err < 0) {
+		err_msg = "could not request regions";
+		goto error_out_mwi;
+	}
+
+	/* map our registers
+	 */
+	if (use_mmio != 0 && use_mmio != 1)
+		use_mmio = typhoon_test_mmio(pdev);
+
+	ioaddr = pci_iomap(pdev, use_mmio, 128);
+	if (!ioaddr) {
+		err_msg = "cannot remap registers, aborting";
+		err = -EIO;
+		goto error_out_regions;
+	}
+
+	/* allocate pci dma space for rx and tx descriptor rings
+	 */
+	shared = dma_alloc_coherent(&pdev->dev, sizeof(struct typhoon_shared),
+				    &shared_dma, GFP_KERNEL);
+	if (!shared) {
+		err_msg = "could not allocate DMA memory";
+		err = -ENOMEM;
+		goto error_out_remap;
+	}
+
+	dev->irq = pdev->irq;
+	tp = netdev_priv(dev);
+	tp->shared = shared;
+	tp->shared_dma = shared_dma;
+	tp->pdev = pdev;
+	tp->tx_pdev = pdev;
+	tp->ioaddr = ioaddr;
+	tp->tx_ioaddr = ioaddr;
+	tp->dev = dev;
+
+	/* Init sequence:
+	 * 1) Reset the adapter to clear any bad juju
+	 * 2) Reload the sleep image
+	 * 3) Boot the sleep image
+	 * 4) Get the hardware address.
+	 * 5) Put the card to sleep.
+	 */
+	err = typhoon_reset(ioaddr, WaitSleep);
+	if (err < 0) {
+		err_msg = "could not reset 3XP";
+		goto error_out_dma;
+	}
+
+	/* Now that we've reset the 3XP and are sure it's not going to
+	 * write all over memory, enable bus mastering, and save our
+	 * state for resuming after a suspend.
+	 */
+	pci_set_master(pdev);
+	pci_save_state(pdev);
+
+	typhoon_init_interface(tp);
+	typhoon_init_rings(tp);
+
+	err = typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST);
+	if (err < 0) {
+		err_msg = "cannot boot 3XP sleep image";
+		goto error_out_reset;
+	}
+
+	INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_MAC_ADDRESS);
+	err = typhoon_issue_command(tp, 1, &xp_cmd, 1, xp_resp);
+	if (err < 0) {
+		err_msg = "cannot read MAC address";
+		goto error_out_reset;
+	}
+
+	*(__be16 *)&addr[0] = htons(le16_to_cpu(xp_resp[0].parm1));
+	*(__be32 *)&addr[2] = htonl(le32_to_cpu(xp_resp[0].parm2));
+	eth_hw_addr_set(dev, addr);
+
+	if (!is_valid_ether_addr(dev->dev_addr)) {
+		err_msg = "Could not obtain valid ethernet address, aborting";
+		err = -EIO;
+		goto error_out_reset;
+	}
+
+	/* Read the Sleep Image version last, so the response is valid
+	 * later when we print out the version reported.
+	 */
+	INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_VERSIONS);
+	err = typhoon_issue_command(tp, 1, &xp_cmd, 3, xp_resp);
+	if (err < 0) {
+		err_msg = "Could not get Sleep Image version";
+		goto error_out_reset;
+	}
+
+	tp->capabilities = typhoon_card_info[card_id].capabilities;
+	tp->xcvr_select = TYPHOON_XCVR_AUTONEG;
+
+	/* Typhoon 1.0 Sleep Images return one response descriptor to the
+	 * READ_VERSIONS command. Those versions are OK after waking up
+	 * from sleep without needing a reset. Typhoon 1.1+ Sleep Images
+	 * seem to need a little extra help to get started. Since we don't
+	 * know how to nudge it along, just kick it.
+	 */
+	if (xp_resp[0].numDesc != 0)
+		tp->capabilities |= TYPHOON_WAKEUP_NEEDS_RESET;
+
+	err = typhoon_sleep(tp, PCI_D3hot, 0);
+	if (err < 0) {
+		err_msg = "cannot put adapter to sleep";
+		goto error_out_reset;
+	}
+
+	/* The chip-specific entries in the device structure. */
+	dev->netdev_ops		= &typhoon_netdev_ops;
+	netif_napi_add_weight(dev, &tp->napi, typhoon_poll, 16);
+	dev->watchdog_timeo	= TX_TIMEOUT;
+
+	dev->ethtool_ops = &typhoon_ethtool_ops;
+
+	/* We can handle scatter gather, up to 16 entries, and
+	 * we can do IP checksumming (only version 4, doh...)
+	 *
+	 * There's no way to turn off the RX VLAN offloading and stripping
+	 * on the current 3XP firmware -- it does not respect the offload
+	 * settings -- so we only allow the user to toggle the TX processing.
+	 */
+	dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
+		NETIF_F_HW_VLAN_CTAG_TX;
+	dev->features = dev->hw_features |
+		NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_RXCSUM;
+
+	err = register_netdev(dev);
+	if (err < 0) {
+		err_msg = "unable to register netdev";
+		goto error_out_reset;
+	}
+
+	pci_set_drvdata(pdev, dev);
+
+	netdev_info(dev, "%s at %s 0x%llx, %pM\n",
+		    typhoon_card_info[card_id].name,
+		    use_mmio ? "MMIO" : "IO",
+		    (unsigned long long)pci_resource_start(pdev, use_mmio),
+		    dev->dev_addr);
+
+	/* xp_resp still contains the response to the READ_VERSIONS command.
+	 * For debugging, let the user know what version he has.
+	 */
+	if (xp_resp[0].numDesc == 0) {
+		/* This is the Typhoon 1.0 type Sleep Image, last 16 bits
+		 * of version is Month/Day of build.
+		 */
+		u16 monthday = le32_to_cpu(xp_resp[0].parm2) & 0xffff;
+		netdev_info(dev, "Typhoon 1.0 Sleep Image built %02u/%02u/2000\n",
+			    monthday >> 8, monthday & 0xff);
+	} else if (xp_resp[0].numDesc == 2) {
+		/* This is the Typhoon 1.1+ type Sleep Image
+		 */
+		u32 sleep_ver = le32_to_cpu(xp_resp[0].parm2);
+		u8 *ver_string = (u8 *) &xp_resp[1];
+		ver_string[25] = 0;
+		netdev_info(dev, "Typhoon 1.1+ Sleep Image version %02x.%03x.%03x %s\n",
+			    sleep_ver >> 24, (sleep_ver >> 12) & 0xfff,
+			    sleep_ver & 0xfff, ver_string);
+	} else {
+		netdev_warn(dev, "Unknown Sleep Image version (%u:%04x)\n",
+			    xp_resp[0].numDesc, le32_to_cpu(xp_resp[0].parm2));
+	}
+
+	return 0;
+
+error_out_reset:
+	typhoon_reset(ioaddr, NoWait);
+
+error_out_dma:
+	dma_free_coherent(&pdev->dev, sizeof(struct typhoon_shared), shared,
+			  shared_dma);
+error_out_remap:
+	pci_iounmap(pdev, ioaddr);
+error_out_regions:
+	pci_release_regions(pdev);
+error_out_mwi:
+	pci_clear_mwi(pdev);
+error_out_disable:
+	pci_disable_device(pdev);
+error_out_dev:
+	free_netdev(dev);
+error_out:
+	pr_err("%s: %s\n", pci_name(pdev), err_msg);
+	return err;
+}
+
+static void
+typhoon_remove_one(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct typhoon *tp = netdev_priv(dev);
+
+	unregister_netdev(dev);
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	typhoon_reset(tp->ioaddr, NoWait);
+	pci_iounmap(pdev, tp->ioaddr);
+	dma_free_coherent(&pdev->dev, sizeof(struct typhoon_shared),
+			  tp->shared, tp->shared_dma);
+	pci_release_regions(pdev);
+	pci_clear_mwi(pdev);
+	pci_disable_device(pdev);
+	free_netdev(dev);
+}
+
+static SIMPLE_DEV_PM_OPS(typhoon_pm_ops, typhoon_suspend, typhoon_resume);
+
+static struct pci_driver typhoon_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= typhoon_pci_tbl,
+	.probe		= typhoon_init_one,
+	.remove		= typhoon_remove_one,
+	.driver.pm	= &typhoon_pm_ops,
+};
+
+static int __init
+typhoon_init(void)
+{
+	return pci_register_driver(&typhoon_driver);
+}
+
+static void __exit
+typhoon_cleanup(void)
+{
+	release_firmware(typhoon_fw);
+	pci_unregister_driver(&typhoon_driver);
+}
+
+module_init(typhoon_init);
+module_exit(typhoon_cleanup);
diff --git a/drivers/net/ethernet/3com/typhoon.h b/drivers/net/ethernet/3com/typhoon.h
new file mode 100644
index 000000000..38e6dcab4
--- /dev/null
+++ b/drivers/net/ethernet/3com/typhoon.h
@@ -0,0 +1,624 @@
+/* typhoon.h:	chip info for the 3Com 3CR990 family of controllers */
+/*
+	Written 2002-2003 by David Dillow <dave@thedillows.org>
+
+	This software may be used and distributed according to the terms of
+	the GNU General Public License (GPL), incorporated herein by reference.
+	Drivers based on or derived from this code fall under the GPL and must
+	retain the authorship, copyright and license notice.  This file is not
+	a complete program and may only be used when the entire operating
+	system is licensed under the GPL.
+
+	This software is available on a public web site. It may enable
+	cryptographic capabilities of the 3Com hardware, and may be
+	exported from the United States under License Exception "TSU"
+	pursuant to 15 C.F.R. Section 740.13(e).
+
+	This work was funded by the National Library of Medicine under
+	the Department of Energy project number 0274DD06D1 and NLM project
+	number Y1-LM-2015-01.
+*/
+
+/* All Typhoon ring positions are specificed in bytes, and point to the
+ * first "clean" entry in the ring -- ie the next entry we use for whatever
+ * purpose.
+ */
+
+/* The Typhoon basic ring
+ * ringBase:  where this ring lives (our virtual address)
+ * lastWrite: the next entry we'll use
+ */
+struct basic_ring {
+	u8 *ringBase;
+	u32 lastWrite;
+};
+
+/* The Typhoon transmit ring -- same as a basic ring, plus:
+ * lastRead:      where we're at in regard to cleaning up the ring
+ * writeRegister: register to use for writing (different for Hi & Lo rings)
+ */
+struct transmit_ring {
+	u8 *ringBase;
+	u32 lastWrite;
+	u32 lastRead;
+	int writeRegister;
+};
+
+/* The host<->Typhoon ring index structure
+ * This indicates the current positions in the rings
+ *
+ * All values must be in little endian format for the 3XP
+ *
+ * rxHiCleared:   entry we've cleared to in the Hi receive ring
+ * rxLoCleared:   entry we've cleared to in the Lo receive ring
+ * rxBuffReady:   next entry we'll put a free buffer in
+ * respCleared:   entry we've cleared to in the response ring
+ *
+ * txLoCleared:   entry the NIC has cleared to in the Lo transmit ring
+ * txHiCleared:   entry the NIC has cleared to in the Hi transmit ring
+ * rxLoReady:     entry the NIC has filled to in the Lo receive ring
+ * rxBuffCleared: entry the NIC has cleared in the free buffer ring
+ * cmdCleared:    entry the NIC has cleared in the command ring
+ * respReady:     entry the NIC has filled to in the response ring
+ * rxHiReady:     entry the NIC has filled to in the Hi receive ring
+ */
+struct typhoon_indexes {
+	/* The first four are written by the host, and read by the NIC */
+	volatile __le32 rxHiCleared;
+	volatile __le32 rxLoCleared;
+	volatile __le32 rxBuffReady;
+	volatile __le32 respCleared;
+
+	/* The remaining are written by the NIC, and read by the host */
+	volatile __le32 txLoCleared;
+	volatile __le32 txHiCleared;
+	volatile __le32 rxLoReady;
+	volatile __le32 rxBuffCleared;
+	volatile __le32 cmdCleared;
+	volatile __le32 respReady;
+	volatile __le32 rxHiReady;
+} __packed;
+
+/* The host<->Typhoon interface
+ * Our means of communicating where things are
+ *
+ * All values must be in little endian format for the 3XP
+ *
+ * ringIndex:   64 bit bus address of the index structure
+ * txLoAddr:    64 bit bus address of the Lo transmit ring
+ * txLoSize:    size (in bytes) of the Lo transmit ring
+ * txHi*:       as above for the Hi priority transmit ring
+ * rxLo*:       as above for the Lo priority receive ring
+ * rxBuff*:     as above for the free buffer ring
+ * cmd*:        as above for the command ring
+ * resp*:       as above for the response ring
+ * zeroAddr:    64 bit bus address of a zero word (for DMA)
+ * rxHi*:       as above for the Hi Priority receive ring
+ *
+ * While there is room for 64 bit addresses, current versions of the 3XP
+ * only do 32 bit addresses, so the *Hi for each of the above will always
+ * be zero.
+ */
+struct typhoon_interface {
+	__le32 ringIndex;
+	__le32 ringIndexHi;
+	__le32 txLoAddr;
+	__le32 txLoAddrHi;
+	__le32 txLoSize;
+	__le32 txHiAddr;
+	__le32 txHiAddrHi;
+	__le32 txHiSize;
+	__le32 rxLoAddr;
+	__le32 rxLoAddrHi;
+	__le32 rxLoSize;
+	__le32 rxBuffAddr;
+	__le32 rxBuffAddrHi;
+	__le32 rxBuffSize;
+	__le32 cmdAddr;
+	__le32 cmdAddrHi;
+	__le32 cmdSize;
+	__le32 respAddr;
+	__le32 respAddrHi;
+	__le32 respSize;
+	__le32 zeroAddr;
+	__le32 zeroAddrHi;
+	__le32 rxHiAddr;
+	__le32 rxHiAddrHi;
+	__le32 rxHiSize;
+} __packed;
+
+/* The Typhoon transmit/fragment descriptor
+ *
+ * A packet is described by a packet descriptor, followed by option descriptors,
+ * if any, then one or more fragment descriptors.
+ *
+ * Packet descriptor:
+ * flags:	Descriptor type
+ * len:i	zero, or length of this packet
+ * addr*:	8 bytes of opaque data to the firmware -- for skb pointer
+ * processFlags: Determine offload tasks to perform on this packet.
+ *
+ * Fragment descriptor:
+ * flags:	Descriptor type
+ * len:i	length of this fragment
+ * addr:	low bytes of DMA address for this part of the packet
+ * addrHi:	hi bytes of DMA address for this part of the packet
+ * processFlags: must be zero
+ *
+ * TYPHOON_DESC_VALID is not mentioned in their docs, but their Linux
+ * driver uses it.
+ */
+struct tx_desc {
+	u8  flags;
+#define TYPHOON_TYPE_MASK	0x07
+#define 	TYPHOON_FRAG_DESC	0x00
+#define 	TYPHOON_TX_DESC		0x01
+#define 	TYPHOON_CMD_DESC	0x02
+#define 	TYPHOON_OPT_DESC	0x03
+#define 	TYPHOON_RX_DESC		0x04
+#define 	TYPHOON_RESP_DESC	0x05
+#define TYPHOON_OPT_TYPE_MASK	0xf0
+#define 	TYPHOON_OPT_IPSEC	0x00
+#define 	TYPHOON_OPT_TCP_SEG	0x10
+#define TYPHOON_CMD_RESPOND	0x40
+#define TYPHOON_RESP_ERROR	0x40
+#define TYPHOON_RX_ERROR	0x40
+#define TYPHOON_DESC_VALID	0x80
+	u8  numDesc;
+	__le16 len;
+	union {
+		struct {
+			__le32 addr;
+			__le32 addrHi;
+		} frag;
+		u64 tx_addr;	/* opaque for hardware, for TX_DESC */
+	};
+	__le32 processFlags;
+#define TYPHOON_TX_PF_NO_CRC		cpu_to_le32(0x00000001)
+#define TYPHOON_TX_PF_IP_CHKSUM		cpu_to_le32(0x00000002)
+#define TYPHOON_TX_PF_TCP_CHKSUM	cpu_to_le32(0x00000004)
+#define TYPHOON_TX_PF_TCP_SEGMENT	cpu_to_le32(0x00000008)
+#define TYPHOON_TX_PF_INSERT_VLAN	cpu_to_le32(0x00000010)
+#define TYPHOON_TX_PF_IPSEC		cpu_to_le32(0x00000020)
+#define TYPHOON_TX_PF_VLAN_PRIORITY	cpu_to_le32(0x00000040)
+#define TYPHOON_TX_PF_UDP_CHKSUM	cpu_to_le32(0x00000080)
+#define TYPHOON_TX_PF_PAD_FRAME		cpu_to_le32(0x00000100)
+#define TYPHOON_TX_PF_RESERVED		cpu_to_le32(0x00000e00)
+#define TYPHOON_TX_PF_VLAN_MASK		cpu_to_le32(0x0ffff000)
+#define TYPHOON_TX_PF_INTERNAL		cpu_to_le32(0xf0000000)
+#define TYPHOON_TX_PF_VLAN_TAG_SHIFT	12
+} __packed;
+
+/* The TCP Segmentation offload option descriptor
+ *
+ * flags:	descriptor type
+ * numDesc:	must be 1
+ * mss_flags:	bits 0-11 (little endian) are MSS, 12 is first TSO descriptor
+ *			13 is list TSO descriptor, set both if only one TSO
+ * respAddrLo:	low bytes of address of the bytesTx field of this descriptor
+ * bytesTx:	total number of bytes in this TSO request
+ * status:	0 on completion
+ */
+struct tcpopt_desc {
+	u8  flags;
+	u8  numDesc;
+	__le16 mss_flags;
+#define TYPHOON_TSO_FIRST		cpu_to_le16(0x1000)
+#define TYPHOON_TSO_LAST		cpu_to_le16(0x2000)
+	__le32 respAddrLo;
+	__le32 bytesTx;
+	__le32 status;
+} __packed;
+
+/* The IPSEC Offload descriptor
+ *
+ * flags:	descriptor type
+ * numDesc:	must be 1
+ * ipsecFlags:	bit 0: 0 -- generate IV, 1 -- use supplied IV
+ * sa1, sa2:	Security Association IDs for this packet
+ * reserved:	set to 0
+ */
+struct ipsec_desc {
+	u8  flags;
+	u8  numDesc;
+	__le16 ipsecFlags;
+#define TYPHOON_IPSEC_GEN_IV	cpu_to_le16(0x0000)
+#define TYPHOON_IPSEC_USE_IV	cpu_to_le16(0x0001)
+	__le32 sa1;
+	__le32 sa2;
+	__le32 reserved;
+} __packed;
+
+/* The Typhoon receive descriptor (Updated by NIC)
+ *
+ * flags:         Descriptor type, error indication
+ * numDesc:       Always zero
+ * frameLen:      the size of the packet received
+ * addr:          low 32 bytes of the virtual addr passed in for this buffer
+ * addrHi:        high 32 bytes of the virtual addr passed in for this buffer
+ * rxStatus:      Error if set in flags, otherwise result of offload processing
+ * filterResults: results of filtering on packet, not used
+ * ipsecResults:  Results of IPSEC processing
+ * vlanTag:       the 801.2q TCI from the packet
+ */
+struct rx_desc {
+	u8  flags;
+	u8  numDesc;
+	__le16 frameLen;
+	u32 addr;	/* opaque, comes from virtAddr */
+	u32 addrHi;	/* opaque, comes from virtAddrHi */
+	__le32 rxStatus;
+#define TYPHOON_RX_ERR_INTERNAL		cpu_to_le32(0x00000000)
+#define TYPHOON_RX_ERR_FIFO_UNDERRUN	cpu_to_le32(0x00000001)
+#define TYPHOON_RX_ERR_BAD_SSD		cpu_to_le32(0x00000002)
+#define TYPHOON_RX_ERR_RUNT		cpu_to_le32(0x00000003)
+#define TYPHOON_RX_ERR_CRC		cpu_to_le32(0x00000004)
+#define TYPHOON_RX_ERR_OVERSIZE		cpu_to_le32(0x00000005)
+#define TYPHOON_RX_ERR_ALIGN		cpu_to_le32(0x00000006)
+#define TYPHOON_RX_ERR_DRIBBLE		cpu_to_le32(0x00000007)
+#define TYPHOON_RX_PROTO_MASK		cpu_to_le32(0x00000003)
+#define TYPHOON_RX_PROTO_UNKNOWN	cpu_to_le32(0x00000000)
+#define TYPHOON_RX_PROTO_IP		cpu_to_le32(0x00000001)
+#define TYPHOON_RX_PROTO_IPX		cpu_to_le32(0x00000002)
+#define TYPHOON_RX_VLAN			cpu_to_le32(0x00000004)
+#define TYPHOON_RX_IP_FRAG		cpu_to_le32(0x00000008)
+#define TYPHOON_RX_IPSEC		cpu_to_le32(0x00000010)
+#define TYPHOON_RX_IP_CHK_FAIL		cpu_to_le32(0x00000020)
+#define TYPHOON_RX_TCP_CHK_FAIL		cpu_to_le32(0x00000040)
+#define TYPHOON_RX_UDP_CHK_FAIL		cpu_to_le32(0x00000080)
+#define TYPHOON_RX_IP_CHK_GOOD		cpu_to_le32(0x00000100)
+#define TYPHOON_RX_TCP_CHK_GOOD		cpu_to_le32(0x00000200)
+#define TYPHOON_RX_UDP_CHK_GOOD		cpu_to_le32(0x00000400)
+	__le16 filterResults;
+#define TYPHOON_RX_FILTER_MASK		cpu_to_le16(0x7fff)
+#define TYPHOON_RX_FILTERED		cpu_to_le16(0x8000)
+	__le16 ipsecResults;
+#define TYPHOON_RX_OUTER_AH_GOOD	cpu_to_le16(0x0001)
+#define TYPHOON_RX_OUTER_ESP_GOOD	cpu_to_le16(0x0002)
+#define TYPHOON_RX_INNER_AH_GOOD	cpu_to_le16(0x0004)
+#define TYPHOON_RX_INNER_ESP_GOOD	cpu_to_le16(0x0008)
+#define TYPHOON_RX_OUTER_AH_FAIL	cpu_to_le16(0x0010)
+#define TYPHOON_RX_OUTER_ESP_FAIL	cpu_to_le16(0x0020)
+#define TYPHOON_RX_INNER_AH_FAIL	cpu_to_le16(0x0040)
+#define TYPHOON_RX_INNER_ESP_FAIL	cpu_to_le16(0x0080)
+#define TYPHOON_RX_UNKNOWN_SA		cpu_to_le16(0x0100)
+#define TYPHOON_RX_ESP_FORMAT_ERR	cpu_to_le16(0x0200)
+	__be32 vlanTag;
+} __packed;
+
+/* The Typhoon free buffer descriptor, used to give a buffer to the NIC
+ *
+ * physAddr:    low 32 bits of the bus address of the buffer
+ * physAddrHi:  high 32 bits of the bus address of the buffer, always zero
+ * virtAddr:    low 32 bits of the skb address
+ * virtAddrHi:  high 32 bits of the skb address, always zero
+ *
+ * the virt* address is basically two 32 bit cookies, just passed back
+ * from the NIC
+ */
+struct rx_free {
+	__le32 physAddr;
+	__le32 physAddrHi;
+	u32 virtAddr;
+	u32 virtAddrHi;
+} __packed;
+
+/* The Typhoon command descriptor, used for commands and responses
+ *
+ * flags:   descriptor type
+ * numDesc: number of descriptors following in this command/response,
+ *				ie, zero for a one descriptor command
+ * cmd:     the command
+ * seqNo:   sequence number (unused)
+ * parm1:   use varies by command
+ * parm2:   use varies by command
+ * parm3:   use varies by command
+ */
+struct cmd_desc {
+	u8  flags;
+	u8  numDesc;
+	__le16 cmd;
+#define TYPHOON_CMD_TX_ENABLE		cpu_to_le16(0x0001)
+#define TYPHOON_CMD_TX_DISABLE		cpu_to_le16(0x0002)
+#define TYPHOON_CMD_RX_ENABLE		cpu_to_le16(0x0003)
+#define TYPHOON_CMD_RX_DISABLE		cpu_to_le16(0x0004)
+#define TYPHOON_CMD_SET_RX_FILTER	cpu_to_le16(0x0005)
+#define TYPHOON_CMD_READ_STATS		cpu_to_le16(0x0007)
+#define TYPHOON_CMD_XCVR_SELECT		cpu_to_le16(0x0013)
+#define TYPHOON_CMD_SET_MAX_PKT_SIZE	cpu_to_le16(0x001a)
+#define TYPHOON_CMD_READ_MEDIA_STATUS	cpu_to_le16(0x001b)
+#define TYPHOON_CMD_GOTO_SLEEP		cpu_to_le16(0x0023)
+#define TYPHOON_CMD_SET_MULTICAST_HASH	cpu_to_le16(0x0025)
+#define TYPHOON_CMD_SET_MAC_ADDRESS	cpu_to_le16(0x0026)
+#define TYPHOON_CMD_READ_MAC_ADDRESS	cpu_to_le16(0x0027)
+#define TYPHOON_CMD_VLAN_TYPE_WRITE	cpu_to_le16(0x002b)
+#define TYPHOON_CMD_CREATE_SA		cpu_to_le16(0x0034)
+#define TYPHOON_CMD_DELETE_SA		cpu_to_le16(0x0035)
+#define TYPHOON_CMD_READ_VERSIONS	cpu_to_le16(0x0043)
+#define TYPHOON_CMD_IRQ_COALESCE_CTRL	cpu_to_le16(0x0045)
+#define TYPHOON_CMD_ENABLE_WAKE_EVENTS	cpu_to_le16(0x0049)
+#define TYPHOON_CMD_SET_OFFLOAD_TASKS	cpu_to_le16(0x004f)
+#define TYPHOON_CMD_HELLO_RESP		cpu_to_le16(0x0057)
+#define TYPHOON_CMD_HALT		cpu_to_le16(0x005d)
+#define TYPHOON_CMD_READ_IPSEC_INFO	cpu_to_le16(0x005e)
+#define TYPHOON_CMD_GET_IPSEC_ENABLE	cpu_to_le16(0x0067)
+#define TYPHOON_CMD_GET_CMD_LVL		cpu_to_le16(0x0069)
+	u16 seqNo;
+	__le16 parm1;
+	__le32 parm2;
+	__le32 parm3;
+} __packed;
+
+/* The Typhoon response descriptor, see command descriptor for details
+ */
+struct resp_desc {
+	u8  flags;
+	u8  numDesc;
+	__le16 cmd;
+	__le16 seqNo;
+	__le16 parm1;
+	__le32 parm2;
+	__le32 parm3;
+} __packed;
+
+#define INIT_COMMAND_NO_RESPONSE(x, command)				\
+	do { struct cmd_desc *_ptr = (x);				\
+		memset(_ptr, 0, sizeof(struct cmd_desc));		\
+		_ptr->flags = TYPHOON_CMD_DESC | TYPHOON_DESC_VALID;	\
+		_ptr->cmd = command;					\
+	} while (0)
+
+/* We set seqNo to 1 if we're expecting a response from this command */
+#define INIT_COMMAND_WITH_RESPONSE(x, command)				\
+	do { struct cmd_desc *_ptr = (x);				\
+		memset(_ptr, 0, sizeof(struct cmd_desc));		\
+		_ptr->flags = TYPHOON_CMD_RESPOND | TYPHOON_CMD_DESC;	\
+		_ptr->flags |= TYPHOON_DESC_VALID; 			\
+		_ptr->cmd = command;					\
+		_ptr->seqNo = 1;					\
+	} while (0)
+
+/* TYPHOON_CMD_SET_RX_FILTER filter bits (cmd.parm1)
+ */
+#define TYPHOON_RX_FILTER_DIRECTED	cpu_to_le16(0x0001)
+#define TYPHOON_RX_FILTER_ALL_MCAST	cpu_to_le16(0x0002)
+#define TYPHOON_RX_FILTER_BROADCAST	cpu_to_le16(0x0004)
+#define TYPHOON_RX_FILTER_PROMISCOUS	cpu_to_le16(0x0008)
+#define TYPHOON_RX_FILTER_MCAST_HASH	cpu_to_le16(0x0010)
+
+/* TYPHOON_CMD_READ_STATS response format
+ */
+struct stats_resp {
+	u8  flags;
+	u8  numDesc;
+	__le16 cmd;
+	__le16 seqNo;
+	__le16 unused;
+	__le32 txPackets;
+	__le64 txBytes;
+	__le32 txDeferred;
+	__le32 txLateCollisions;
+	__le32 txCollisions;
+	__le32 txCarrierLost;
+	__le32 txMultipleCollisions;
+	__le32 txExcessiveCollisions;
+	__le32 txFifoUnderruns;
+	__le32 txMulticastTxOverflows;
+	__le32 txFiltered;
+	__le32 rxPacketsGood;
+	__le64 rxBytesGood;
+	__le32 rxFifoOverruns;
+	__le32 BadSSD;
+	__le32 rxCrcErrors;
+	__le32 rxOversized;
+	__le32 rxBroadcast;
+	__le32 rxMulticast;
+	__le32 rxOverflow;
+	__le32 rxFiltered;
+	__le32 linkStatus;
+#define TYPHOON_LINK_STAT_MASK		cpu_to_le32(0x00000001)
+#define TYPHOON_LINK_GOOD		cpu_to_le32(0x00000001)
+#define TYPHOON_LINK_BAD		cpu_to_le32(0x00000000)
+#define TYPHOON_LINK_SPEED_MASK		cpu_to_le32(0x00000002)
+#define TYPHOON_LINK_100MBPS		cpu_to_le32(0x00000002)
+#define TYPHOON_LINK_10MBPS		cpu_to_le32(0x00000000)
+#define TYPHOON_LINK_DUPLEX_MASK	cpu_to_le32(0x00000004)
+#define TYPHOON_LINK_FULL_DUPLEX	cpu_to_le32(0x00000004)
+#define TYPHOON_LINK_HALF_DUPLEX	cpu_to_le32(0x00000000)
+	__le32 unused2;
+	__le32 unused3;
+} __packed;
+
+/* TYPHOON_CMD_XCVR_SELECT xcvr values (resp.parm1)
+ */
+#define TYPHOON_XCVR_10HALF	cpu_to_le16(0x0000)
+#define TYPHOON_XCVR_10FULL	cpu_to_le16(0x0001)
+#define TYPHOON_XCVR_100HALF	cpu_to_le16(0x0002)
+#define TYPHOON_XCVR_100FULL	cpu_to_le16(0x0003)
+#define TYPHOON_XCVR_AUTONEG	cpu_to_le16(0x0004)
+
+/* TYPHOON_CMD_READ_MEDIA_STATUS (resp.parm1)
+ */
+#define TYPHOON_MEDIA_STAT_CRC_STRIP_DISABLE	cpu_to_le16(0x0004)
+#define TYPHOON_MEDIA_STAT_COLLISION_DETECT	cpu_to_le16(0x0010)
+#define TYPHOON_MEDIA_STAT_CARRIER_SENSE	cpu_to_le16(0x0020)
+#define TYPHOON_MEDIA_STAT_POLARITY_REV		cpu_to_le16(0x0400)
+#define TYPHOON_MEDIA_STAT_NO_LINK		cpu_to_le16(0x0800)
+
+/* TYPHOON_CMD_SET_MULTICAST_HASH enable values (cmd.parm1)
+ */
+#define TYPHOON_MCAST_HASH_DISABLE	cpu_to_le16(0x0000)
+#define TYPHOON_MCAST_HASH_ENABLE	cpu_to_le16(0x0001)
+#define TYPHOON_MCAST_HASH_SET		cpu_to_le16(0x0002)
+
+/* TYPHOON_CMD_CREATE_SA descriptor and settings
+ */
+struct sa_descriptor {
+	u8  flags;
+	u8  numDesc;
+	u16 cmd;
+	u16 seqNo;
+	u16 mode;
+#define TYPHOON_SA_MODE_NULL		cpu_to_le16(0x0000)
+#define TYPHOON_SA_MODE_AH		cpu_to_le16(0x0001)
+#define TYPHOON_SA_MODE_ESP		cpu_to_le16(0x0002)
+	u8  hashFlags;
+#define TYPHOON_SA_HASH_ENABLE		0x01
+#define TYPHOON_SA_HASH_SHA1		0x02
+#define TYPHOON_SA_HASH_MD5		0x04
+	u8  direction;
+#define TYPHOON_SA_DIR_RX		0x00
+#define TYPHOON_SA_DIR_TX		0x01
+	u8  encryptionFlags;
+#define TYPHOON_SA_ENCRYPT_ENABLE	0x01
+#define TYPHOON_SA_ENCRYPT_DES		0x02
+#define TYPHOON_SA_ENCRYPT_3DES		0x00
+#define TYPHOON_SA_ENCRYPT_3DES_2KEY	0x00
+#define TYPHOON_SA_ENCRYPT_3DES_3KEY	0x04
+#define TYPHOON_SA_ENCRYPT_CBC		0x08
+#define TYPHOON_SA_ENCRYPT_ECB		0x00
+	u8  specifyIndex;
+#define TYPHOON_SA_SPECIFY_INDEX	0x01
+#define TYPHOON_SA_GENERATE_INDEX	0x00
+	u32 SPI;
+	u32 destAddr;
+	u32 destMask;
+	u8  integKey[20];
+	u8  confKey[24];
+	u32 index;
+	u32 unused;
+	u32 unused2;
+} __packed;
+
+/* TYPHOON_CMD_SET_OFFLOAD_TASKS bits (cmd.parm2 (Tx) & cmd.parm3 (Rx))
+ * This is all for IPv4.
+ */
+#define TYPHOON_OFFLOAD_TCP_CHKSUM	cpu_to_le32(0x00000002)
+#define TYPHOON_OFFLOAD_UDP_CHKSUM	cpu_to_le32(0x00000004)
+#define TYPHOON_OFFLOAD_IP_CHKSUM	cpu_to_le32(0x00000008)
+#define TYPHOON_OFFLOAD_IPSEC		cpu_to_le32(0x00000010)
+#define TYPHOON_OFFLOAD_BCAST_THROTTLE	cpu_to_le32(0x00000020)
+#define TYPHOON_OFFLOAD_DHCP_PREVENT	cpu_to_le32(0x00000040)
+#define TYPHOON_OFFLOAD_VLAN		cpu_to_le32(0x00000080)
+#define TYPHOON_OFFLOAD_FILTERING	cpu_to_le32(0x00000100)
+#define TYPHOON_OFFLOAD_TCP_SEGMENT	cpu_to_le32(0x00000200)
+
+/* TYPHOON_CMD_ENABLE_WAKE_EVENTS bits (cmd.parm1)
+ */
+#define TYPHOON_WAKE_MAGIC_PKT		cpu_to_le16(0x01)
+#define TYPHOON_WAKE_LINK_EVENT		cpu_to_le16(0x02)
+#define TYPHOON_WAKE_ICMP_ECHO		cpu_to_le16(0x04)
+#define TYPHOON_WAKE_ARP		cpu_to_le16(0x08)
+
+/* These are used to load the firmware image on the NIC
+ */
+struct typhoon_file_header {
+	u8  tag[8];
+	__le32 version;
+	__le32 numSections;
+	__le32 startAddr;
+	__le32 hmacDigest[5];
+} __packed;
+
+struct typhoon_section_header {
+	__le32 len;
+	u16 checksum;
+	u16 reserved;
+	__le32 startAddr;
+} __packed;
+
+/* The Typhoon Register offsets
+ */
+#define TYPHOON_REG_SOFT_RESET			0x00
+#define TYPHOON_REG_INTR_STATUS			0x04
+#define TYPHOON_REG_INTR_ENABLE			0x08
+#define TYPHOON_REG_INTR_MASK			0x0c
+#define TYPHOON_REG_SELF_INTERRUPT		0x10
+#define TYPHOON_REG_HOST2ARM7			0x14
+#define TYPHOON_REG_HOST2ARM6			0x18
+#define TYPHOON_REG_HOST2ARM5			0x1c
+#define TYPHOON_REG_HOST2ARM4			0x20
+#define TYPHOON_REG_HOST2ARM3			0x24
+#define TYPHOON_REG_HOST2ARM2			0x28
+#define TYPHOON_REG_HOST2ARM1			0x2c
+#define TYPHOON_REG_HOST2ARM0			0x30
+#define TYPHOON_REG_ARM2HOST3			0x34
+#define TYPHOON_REG_ARM2HOST2			0x38
+#define TYPHOON_REG_ARM2HOST1			0x3c
+#define TYPHOON_REG_ARM2HOST0			0x40
+
+#define TYPHOON_REG_BOOT_DATA_LO		TYPHOON_REG_HOST2ARM5
+#define TYPHOON_REG_BOOT_DATA_HI		TYPHOON_REG_HOST2ARM4
+#define TYPHOON_REG_BOOT_DEST_ADDR		TYPHOON_REG_HOST2ARM3
+#define TYPHOON_REG_BOOT_CHECKSUM		TYPHOON_REG_HOST2ARM2
+#define TYPHOON_REG_BOOT_LENGTH			TYPHOON_REG_HOST2ARM1
+
+#define TYPHOON_REG_DOWNLOAD_BOOT_ADDR		TYPHOON_REG_HOST2ARM1
+#define TYPHOON_REG_DOWNLOAD_HMAC_0		TYPHOON_REG_HOST2ARM2
+#define TYPHOON_REG_DOWNLOAD_HMAC_1		TYPHOON_REG_HOST2ARM3
+#define TYPHOON_REG_DOWNLOAD_HMAC_2		TYPHOON_REG_HOST2ARM4
+#define TYPHOON_REG_DOWNLOAD_HMAC_3		TYPHOON_REG_HOST2ARM5
+#define TYPHOON_REG_DOWNLOAD_HMAC_4		TYPHOON_REG_HOST2ARM6
+
+#define TYPHOON_REG_BOOT_RECORD_ADDR_HI		TYPHOON_REG_HOST2ARM2
+#define TYPHOON_REG_BOOT_RECORD_ADDR_LO		TYPHOON_REG_HOST2ARM1
+
+#define TYPHOON_REG_TX_LO_READY			TYPHOON_REG_HOST2ARM3
+#define TYPHOON_REG_CMD_READY			TYPHOON_REG_HOST2ARM2
+#define TYPHOON_REG_TX_HI_READY			TYPHOON_REG_HOST2ARM1
+
+#define TYPHOON_REG_COMMAND			TYPHOON_REG_HOST2ARM0
+#define TYPHOON_REG_HEARTBEAT			TYPHOON_REG_ARM2HOST3
+#define TYPHOON_REG_STATUS			TYPHOON_REG_ARM2HOST0
+
+/* 3XP Reset values (TYPHOON_REG_SOFT_RESET)
+ */
+#define TYPHOON_RESET_ALL	0x7f
+#define TYPHOON_RESET_NONE	0x00
+
+/* 3XP irq bits (TYPHOON_REG_INTR{STATUS,ENABLE,MASK})
+ *
+ * Some of these came from OpenBSD, as the 3Com docs have it wrong
+ * (INTR_SELF) or don't list it at all (INTR_*_ABORT)
+ *
+ * Enabling irqs on the Heartbeat reg (ArmToHost3) gets you an irq
+ * about every 8ms, so don't do it.
+ */
+#define TYPHOON_INTR_HOST_INT		0x00000001
+#define TYPHOON_INTR_ARM2HOST0		0x00000002
+#define TYPHOON_INTR_ARM2HOST1		0x00000004
+#define TYPHOON_INTR_ARM2HOST2		0x00000008
+#define TYPHOON_INTR_ARM2HOST3		0x00000010
+#define TYPHOON_INTR_DMA0		0x00000020
+#define TYPHOON_INTR_DMA1		0x00000040
+#define TYPHOON_INTR_DMA2		0x00000080
+#define TYPHOON_INTR_DMA3		0x00000100
+#define TYPHOON_INTR_MASTER_ABORT	0x00000200
+#define TYPHOON_INTR_TARGET_ABORT	0x00000400
+#define TYPHOON_INTR_SELF		0x00000800
+#define TYPHOON_INTR_RESERVED		0xfffff000
+
+#define TYPHOON_INTR_BOOTCMD		TYPHOON_INTR_ARM2HOST0
+
+#define TYPHOON_INTR_ENABLE_ALL		0xffffffef
+#define TYPHOON_INTR_ALL		0xffffffff
+#define TYPHOON_INTR_NONE		0x00000000
+
+/* The commands for the 3XP chip (TYPHOON_REG_COMMAND)
+ */
+#define TYPHOON_BOOTCMD_BOOT			0x00
+#define TYPHOON_BOOTCMD_WAKEUP			0xfa
+#define TYPHOON_BOOTCMD_DNLD_COMPLETE		0xfb
+#define TYPHOON_BOOTCMD_SEG_AVAILABLE		0xfc
+#define TYPHOON_BOOTCMD_RUNTIME_IMAGE		0xfd
+#define TYPHOON_BOOTCMD_REG_BOOT_RECORD		0xff
+
+/* 3XP Status values (TYPHOON_REG_STATUS)
+ */
+#define TYPHOON_STATUS_WAITING_FOR_BOOT		0x07
+#define TYPHOON_STATUS_SECOND_INIT		0x08
+#define TYPHOON_STATUS_RUNNING			0x09
+#define TYPHOON_STATUS_WAITING_FOR_HOST		0x0d
+#define TYPHOON_STATUS_WAITING_FOR_SEGMENT	0x10
+#define TYPHOON_STATUS_SLEEPING			0x11
+#define TYPHOON_STATUS_HALTED			0x14