Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 1212 insertions, 0 deletions

diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig
new file mode 100644
index 000000000..0a1400cb4
--- /dev/null
+++ b/drivers/net/ethernet/fujitsu/Kconfig
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Fujitsu Network device configuration
+#
+
+config NET_VENDOR_FUJITSU
+	bool "Fujitsu devices"
+	default y
+	depends on PCMCIA
+	help
+	  If you have a network (Ethernet) card belonging to this class, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  the questions about Fujitsu cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_FUJITSU
+
+config PCMCIA_FMVJ18X
+	tristate "Fujitsu FMV-J18x PCMCIA support"
+	depends on PCMCIA
+	select CRC32
+	help
+	  Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
+	  PCMCIA (PC-card) Ethernet card to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called fmvj18x_cs.  If unsure, say N.
+
+endif # NET_VENDOR_FUJITSU
diff --git a/drivers/net/ethernet/fujitsu/Makefile b/drivers/net/ethernet/fujitsu/Makefile
new file mode 100644
index 000000000..74feebbf4
--- /dev/null
+++ b/drivers/net/ethernet/fujitsu/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the Fujitsu network device drivers.
+#
+
+obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o
diff --git a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
new file mode 100644
index 000000000..485949347
--- /dev/null
+++ b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
@@ -0,0 +1,1176 @@
+/*======================================================================
+    fmvj18x_cs.c 2.8 2002/03/23
+
+    A fmvj18x (and its compatibles) PCMCIA client driver
+
+    Contributed by Shingo Fujimoto, shingo@flab.fujitsu.co.jp
+
+    TDK LAK-CD021 and CONTEC C-NET(PC)C support added by 
+    Nobuhiro Katayama, kata-n@po.iijnet.or.jp
+
+    The PCMCIA client code is based on code written by David Hinds.
+    Network code is based on the "FMV-18x driver" by Yutaka TAMIYA
+    but is actually largely Donald Becker's AT1700 driver, which
+    carries the following attribution:
+
+    Written 1993-94 by Donald Becker.
+
+    Copyright 1993 United States Government as represented by the
+    Director, National Security Agency.
+    
+    This software may be used and distributed according to the terms
+    of the GNU General Public License, incorporated herein by reference.
+    
+    The author may be reached as becker@scyld.com, or C/O
+    Scyld Computing Corporation
+    410 Severn Ave., Suite 210
+    Annapolis MD 21403
+   
+======================================================================*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define DRV_NAME	"fmvj18x_cs"
+#define DRV_VERSION	"2.9"
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/crc32.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ciscode.h>
+#include <pcmcia/ds.h>
+
+#include <linux/uaccess.h>
+#include <asm/io.h>
+
+/*====================================================================*/
+
+/* Module parameters */
+
+MODULE_DESCRIPTION("fmvj18x and compatible PCMCIA ethernet driver");
+MODULE_LICENSE("GPL");
+
+#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
+
+/* SRAM configuration */
+/* 0:4KB*2 TX buffer   else:8KB*2 TX buffer */
+INT_MODULE_PARM(sram_config, 0);
+
+
+/*====================================================================*/
+/*
+    PCMCIA event handlers
+ */
+static int fmvj18x_config(struct pcmcia_device *link);
+static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id);
+static int fmvj18x_setup_mfc(struct pcmcia_device *link);
+static void fmvj18x_release(struct pcmcia_device *link);
+static void fmvj18x_detach(struct pcmcia_device *p_dev);
+
+/*
+    LAN controller(MBH86960A) specific routines
+ */
+static int fjn_config(struct net_device *dev, struct ifmap *map);
+static int fjn_open(struct net_device *dev);
+static int fjn_close(struct net_device *dev);
+static netdev_tx_t fjn_start_xmit(struct sk_buff *skb,
+					struct net_device *dev);
+static irqreturn_t fjn_interrupt(int irq, void *dev_id);
+static void fjn_rx(struct net_device *dev);
+static void fjn_reset(struct net_device *dev);
+static void set_rx_mode(struct net_device *dev);
+static void fjn_tx_timeout(struct net_device *dev, unsigned int txqueue);
+static const struct ethtool_ops netdev_ethtool_ops;
+
+/*
+    card type
+ */
+enum cardtype { MBH10302, MBH10304, TDK, CONTEC, LA501, UNGERMANN,
+	       XXX10304, NEC, KME
+};
+
+/*
+    driver specific data structure
+*/
+struct local_info {
+	struct pcmcia_device	*p_dev;
+    long open_time;
+    uint tx_started:1;
+    uint tx_queue;
+    u_short tx_queue_len;
+    enum cardtype cardtype;
+    u_short sent;
+    u_char __iomem *base;
+};
+
+#define MC_FILTERBREAK 64
+
+/*====================================================================*/
+/* 
+    ioport offset from the base address 
+ */
+#define TX_STATUS               0 /* transmit status register */
+#define RX_STATUS               1 /* receive status register */
+#define TX_INTR                 2 /* transmit interrupt mask register */
+#define RX_INTR                 3 /* receive interrupt mask register */
+#define TX_MODE                 4 /* transmit mode register */
+#define RX_MODE                 5 /* receive mode register */
+#define CONFIG_0                6 /* configuration register 0 */
+#define CONFIG_1                7 /* configuration register 1 */
+
+#define NODE_ID                 8 /* node ID register            (bank 0) */
+#define MAR_ADR                 8 /* multicast address registers (bank 1) */
+
+#define DATAPORT                8 /* buffer mem port registers   (bank 2) */
+#define TX_START               10 /* transmit start register */
+#define COL_CTRL               11 /* 16 collision control register */
+#define BMPR12                 12 /* reserved */
+#define BMPR13                 13 /* reserved */
+#define RX_SKIP                14 /* skip received packet register */
+
+#define LAN_CTRL               16 /* LAN card control register */
+
+#define MAC_ID               0x1a /* hardware address */
+#define UNGERMANN_MAC_ID     0x18 /* UNGERMANN-BASS hardware address */
+
+/* 
+    control bits 
+ */
+#define ENA_TMT_OK           0x80
+#define ENA_TMT_REC          0x20
+#define ENA_COL              0x04
+#define ENA_16_COL           0x02
+#define ENA_TBUS_ERR         0x01
+
+#define ENA_PKT_RDY          0x80
+#define ENA_BUS_ERR          0x40
+#define ENA_LEN_ERR          0x08
+#define ENA_ALG_ERR          0x04
+#define ENA_CRC_ERR          0x02
+#define ENA_OVR_FLO          0x01
+
+/* flags */
+#define F_TMT_RDY            0x80 /* can accept new packet */
+#define F_NET_BSY            0x40 /* carrier is detected */
+#define F_TMT_OK             0x20 /* send packet successfully */
+#define F_SRT_PKT            0x10 /* short packet error */
+#define F_COL_ERR            0x04 /* collision error */
+#define F_16_COL             0x02 /* 16 collision error */
+#define F_TBUS_ERR           0x01 /* bus read error */
+
+#define F_PKT_RDY            0x80 /* packet(s) in buffer */
+#define F_BUS_ERR            0x40 /* bus read error */
+#define F_LEN_ERR            0x08 /* short packet */
+#define F_ALG_ERR            0x04 /* frame error */
+#define F_CRC_ERR            0x02 /* CRC error */
+#define F_OVR_FLO            0x01 /* overflow error */
+
+#define F_BUF_EMP            0x40 /* receive buffer is empty */
+
+#define F_SKP_PKT            0x05 /* drop packet in buffer */
+
+/* default bitmaps */
+#define D_TX_INTR  ( ENA_TMT_OK )
+#define D_RX_INTR  ( ENA_PKT_RDY | ENA_LEN_ERR \
+		   | ENA_ALG_ERR | ENA_CRC_ERR | ENA_OVR_FLO )
+#define TX_STAT_M  ( F_TMT_RDY )
+#define RX_STAT_M  ( F_PKT_RDY | F_LEN_ERR \
+                   | F_ALG_ERR | F_CRC_ERR | F_OVR_FLO )
+
+/* commands */
+#define D_TX_MODE            0x06 /* no tests, detect carrier */
+#define ID_MATCHED           0x02 /* (RX_MODE) */
+#define RECV_ALL             0x03 /* (RX_MODE) */
+#define CONFIG0_DFL          0x5a /* 16bit bus, 4K x 2 Tx queues */
+#define CONFIG0_DFL_1        0x5e /* 16bit bus, 8K x 2 Tx queues */
+#define CONFIG0_RST          0xda /* Data Link Controller off (CONFIG_0) */
+#define CONFIG0_RST_1        0xde /* Data Link Controller off (CONFIG_0) */
+#define BANK_0               0xa0 /* bank 0 (CONFIG_1) */
+#define BANK_1               0xa4 /* bank 1 (CONFIG_1) */
+#define BANK_2               0xa8 /* bank 2 (CONFIG_1) */
+#define CHIP_OFF             0x80 /* contrl chip power off (CONFIG_1) */
+#define DO_TX                0x80 /* do transmit packet */
+#define SEND_PKT             0x81 /* send a packet */
+#define AUTO_MODE            0x07 /* Auto skip packet on 16 col detected */
+#define MANU_MODE            0x03 /* Stop and skip packet on 16 col */
+#define TDK_AUTO_MODE        0x47 /* Auto skip packet on 16 col detected */
+#define TDK_MANU_MODE        0x43 /* Stop and skip packet on 16 col */
+#define INTR_OFF             0x0d /* LAN controller ignores interrupts */
+#define INTR_ON              0x1d /* LAN controller will catch interrupts */
+
+#define TX_TIMEOUT		((400*HZ)/1000)
+
+#define BANK_0U              0x20 /* bank 0 (CONFIG_1) */
+#define BANK_1U              0x24 /* bank 1 (CONFIG_1) */
+#define BANK_2U              0x28 /* bank 2 (CONFIG_1) */
+
+static const struct net_device_ops fjn_netdev_ops = {
+	.ndo_open 		= fjn_open,
+	.ndo_stop		= fjn_close,
+	.ndo_start_xmit 	= fjn_start_xmit,
+	.ndo_tx_timeout 	= fjn_tx_timeout,
+	.ndo_set_config 	= fjn_config,
+	.ndo_set_rx_mode	= set_rx_mode,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+static int fmvj18x_probe(struct pcmcia_device *link)
+{
+    struct local_info *lp;
+    struct net_device *dev;
+
+    dev_dbg(&link->dev, "fmvj18x_attach()\n");
+
+    /* Make up a FMVJ18x specific data structure */
+    dev = alloc_etherdev(sizeof(struct local_info));
+    if (!dev)
+	return -ENOMEM;
+    lp = netdev_priv(dev);
+    link->priv = dev;
+    lp->p_dev = link;
+    lp->base = NULL;
+
+    /* The io structure describes IO port mapping */
+    link->resource[0]->end = 32;
+    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+
+    /* General socket configuration */
+    link->config_flags |= CONF_ENABLE_IRQ;
+
+    dev->netdev_ops = &fjn_netdev_ops;
+    dev->watchdog_timeo = TX_TIMEOUT;
+
+    dev->ethtool_ops = &netdev_ethtool_ops;
+
+    return fmvj18x_config(link);
+} /* fmvj18x_attach */
+
+/*====================================================================*/
+
+static void fmvj18x_detach(struct pcmcia_device *link)
+{
+    struct net_device *dev = link->priv;
+
+    dev_dbg(&link->dev, "fmvj18x_detach\n");
+
+    unregister_netdev(dev);
+
+    fmvj18x_release(link);
+
+    free_netdev(dev);
+} /* fmvj18x_detach */
+
+/*====================================================================*/
+
+static int mfc_try_io_port(struct pcmcia_device *link)
+{
+    int i, ret;
+    static const unsigned int serial_base[5] =
+	{ 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+
+    for (i = 0; i < 5; i++) {
+	link->resource[1]->start = serial_base[i];
+	link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+	if (link->resource[1]->start == 0) {
+	    link->resource[1]->end = 0;
+	    pr_notice("out of resource for serial\n");
+	}
+	ret = pcmcia_request_io(link);
+	if (ret == 0)
+		return ret;
+    }
+    return ret;
+}
+
+static int ungermann_try_io_port(struct pcmcia_device *link)
+{
+    int ret;
+    unsigned int ioaddr;
+    /*
+	Ungermann-Bass Access/CARD accepts 0x300,0x320,0x340,0x360
+	0x380,0x3c0 only for ioport.
+    */
+    for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) {
+	link->resource[0]->start = ioaddr;
+	ret = pcmcia_request_io(link);
+	if (ret == 0) {
+	    /* calculate ConfigIndex value */
+	    link->config_index =
+		((link->resource[0]->start & 0x0f0) >> 3) | 0x22;
+	    return ret;
+	}
+    }
+    return ret;	/* RequestIO failed */
+}
+
+static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
+{
+	return 0; /* strange, but that's what the code did already before... */
+}
+
+static int fmvj18x_config(struct pcmcia_device *link)
+{
+    struct net_device *dev = link->priv;
+    struct local_info *lp = netdev_priv(dev);
+    int i, ret;
+    unsigned int ioaddr;
+    enum cardtype cardtype;
+    char *card_name = "unknown";
+    u8 *buf;
+    size_t len;
+    u_char buggybuf[32];
+    u8 addr[ETH_ALEN];
+
+    dev_dbg(&link->dev, "fmvj18x_config\n");
+
+    link->io_lines = 5;
+
+    len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
+    kfree(buf);
+
+    if (len) {
+	/* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */
+	ret = pcmcia_loop_config(link, fmvj18x_ioprobe, NULL);
+	if (ret != 0)
+		goto failed;
+
+	switch (link->manf_id) {
+	case MANFID_TDK:
+	    cardtype = TDK;
+	    if (link->card_id == PRODID_TDK_GN3410 ||
+		link->card_id == PRODID_TDK_NP9610 ||
+		link->card_id == PRODID_TDK_MN3200) {
+		/* MultiFunction Card */
+		link->config_base = 0x800;
+		link->config_index = 0x47;
+		link->resource[1]->end = 8;
+	    }
+	    break;
+	case MANFID_NEC:
+	    cardtype = NEC; /* MultiFunction Card */
+	    link->config_base = 0x800;
+	    link->config_index = 0x47;
+	    link->resource[1]->end = 8;
+	    break;
+	case MANFID_KME:
+	    cardtype = KME; /* MultiFunction Card */
+	    link->config_base = 0x800;
+	    link->config_index = 0x47;
+	    link->resource[1]->end = 8;
+	    break;
+	case MANFID_CONTEC:
+	    cardtype = CONTEC;
+	    break;
+	case MANFID_FUJITSU:
+	    if (link->config_base == 0x0fe0)
+		cardtype = MBH10302;
+	    else if (link->card_id == PRODID_FUJITSU_MBH10302) 
+                /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302),
+                   but these are MBH10304 based card. */ 
+		cardtype = MBH10304;
+	    else if (link->card_id == PRODID_FUJITSU_MBH10304)
+		cardtype = MBH10304;
+	    else
+		cardtype = LA501;
+	    break;
+	default:
+	    cardtype = MBH10304;
+	}
+    } else {
+	/* old type card */
+	switch (link->manf_id) {
+	case MANFID_FUJITSU:
+	    if (link->card_id == PRODID_FUJITSU_MBH10304) {
+		cardtype = XXX10304;    /* MBH10304 with buggy CIS */
+		link->config_index = 0x20;
+	    } else {
+		cardtype = MBH10302;    /* NextCom NC5310, etc. */
+		link->config_index = 1;
+	    }
+	    break;
+	case MANFID_UNGERMANN:
+	    cardtype = UNGERMANN;
+	    break;
+	default:
+	    cardtype = MBH10302;
+	    link->config_index = 1;
+	}
+    }
+
+    if (link->resource[1]->end != 0) {
+	ret = mfc_try_io_port(link);
+	if (ret != 0) goto failed;
+    } else if (cardtype == UNGERMANN) {
+	ret = ungermann_try_io_port(link);
+	if (ret != 0) goto failed;
+    } else { 
+	    ret = pcmcia_request_io(link);
+	    if (ret)
+		    goto failed;
+    }
+    ret = pcmcia_request_irq(link, fjn_interrupt);
+    if (ret)
+	    goto failed;
+    ret = pcmcia_enable_device(link);
+    if (ret)
+	    goto failed;
+
+    dev->irq = link->irq;
+    dev->base_addr = link->resource[0]->start;
+
+    if (resource_size(link->resource[1]) != 0) {
+	ret = fmvj18x_setup_mfc(link);
+	if (ret != 0) goto failed;
+    }
+
+    ioaddr = dev->base_addr;
+
+    /* Reset controller */
+    if (sram_config == 0) 
+	outb(CONFIG0_RST, ioaddr + CONFIG_0);
+    else
+	outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
+
+    /* Power On chip and select bank 0 */
+    if (cardtype == MBH10302)
+	outb(BANK_0, ioaddr + CONFIG_1);
+    else
+	outb(BANK_0U, ioaddr + CONFIG_1);
+    
+    /* Set hardware address */
+    switch (cardtype) {
+    case MBH10304:
+    case TDK:
+    case LA501:
+    case CONTEC:
+    case NEC:
+    case KME:
+	if (cardtype == MBH10304) {
+	    card_name = "FMV-J182";
+
+	    len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
+	    if (len < 11) {
+		    kfree(buf);
+		    goto failed;
+	    }
+	    /* Read MACID from CIS */
+	    eth_hw_addr_set(dev, &buf[5]);
+	    kfree(buf);
+	} else {
+	    if (pcmcia_get_mac_from_cis(link, dev))
+		goto failed;
+	    if( cardtype == TDK ) {
+		card_name = "TDK LAK-CD021";
+	    } else if( cardtype == LA501 ) {
+		card_name = "LA501";
+	    } else if( cardtype == NEC ) {
+		card_name = "PK-UG-J001";
+	    } else if( cardtype == KME ) {
+		card_name = "Panasonic";
+	    } else {
+		card_name = "C-NET(PC)C";
+	    }
+	}
+	break;
+    case UNGERMANN:
+	/* Read MACID from register */
+	for (i = 0; i < 6; i++) 
+	    addr[i] = inb(ioaddr + UNGERMANN_MAC_ID + i);
+	eth_hw_addr_set(dev, addr);
+	card_name = "Access/CARD";
+	break;
+    case XXX10304:
+	/* Read MACID from Buggy CIS */
+	if (fmvj18x_get_hwinfo(link, buggybuf) == -1) {
+	    pr_notice("unable to read hardware net address\n");
+	    goto failed;
+	}
+	eth_hw_addr_set(dev, buggybuf);
+	card_name = "FMV-J182";
+	break;
+    case MBH10302:
+    default:
+	/* Read MACID from register */
+	for (i = 0; i < 6; i++) 
+	    addr[i] = inb(ioaddr + MAC_ID + i);
+	eth_hw_addr_set(dev, addr);
+	card_name = "FMV-J181";
+	break;
+    }
+
+    lp->cardtype = cardtype;
+    SET_NETDEV_DEV(dev, &link->dev);
+
+    if (register_netdev(dev) != 0) {
+	pr_notice("register_netdev() failed\n");
+	goto failed;
+    }
+
+    /* print current configuration */
+    netdev_info(dev, "%s, sram %s, port %#3lx, irq %d, hw_addr %pM\n",
+		card_name, sram_config == 0 ? "4K TX*2" : "8K TX*2",
+		dev->base_addr, dev->irq, dev->dev_addr);
+
+    return 0;
+    
+failed:
+    fmvj18x_release(link);
+    return -ENODEV;
+} /* fmvj18x_config */
+/*====================================================================*/
+
+static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
+{
+    u_char __iomem *base;
+    int i, j;
+
+    /* Allocate a small memory window */
+    link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
+    link->resource[2]->start = 0; link->resource[2]->end = 0;
+    i = pcmcia_request_window(link, link->resource[2], 0);
+    if (i != 0)
+	return -1;
+
+    base = ioremap(link->resource[2]->start, resource_size(link->resource[2]));
+    if (!base) {
+	pcmcia_release_window(link, link->resource[2]);
+	return -1;
+    }
+
+    pcmcia_map_mem_page(link, link->resource[2], 0);
+
+    /*
+     *  MBH10304 CISTPL_FUNCE_LAN_NODE_ID format
+     *  22 0d xx xx xx 04 06 yy yy yy yy yy yy ff
+     *  'xx' is garbage.
+     *  'yy' is MAC address.
+    */ 
+    for (i = 0; i < 0x200; i++) {
+	if (readb(base+i*2) == 0x22) {	
+		if (readb(base+(i-1)*2) == 0xff &&
+		    readb(base+(i+5)*2) == 0x04 &&
+		    readb(base+(i+6)*2) == 0x06 &&
+		    readb(base+(i+13)*2) == 0xff)
+			break;
+	}
+    }
+
+    if (i != 0x200) {
+	for (j = 0 ; j < 6; j++,i++) {
+	    node_id[j] = readb(base+(i+7)*2);
+	}
+    }
+
+    iounmap(base);
+    j = pcmcia_release_window(link, link->resource[2]);
+    return (i != 0x200) ? 0 : -1;
+
+} /* fmvj18x_get_hwinfo */
+/*====================================================================*/
+
+static int fmvj18x_setup_mfc(struct pcmcia_device *link)
+{
+    int i;
+    struct net_device *dev = link->priv;
+    unsigned int ioaddr;
+    struct local_info *lp = netdev_priv(dev);
+
+    /* Allocate a small memory window */
+    link->resource[3]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
+    link->resource[3]->start = link->resource[3]->end = 0;
+    i = pcmcia_request_window(link, link->resource[3], 0);
+    if (i != 0)
+	return -1;
+
+    lp->base = ioremap(link->resource[3]->start,
+		       resource_size(link->resource[3]));
+    if (lp->base == NULL) {
+	netdev_notice(dev, "ioremap failed\n");
+	return -1;
+    }
+
+    i = pcmcia_map_mem_page(link, link->resource[3], 0);
+    if (i != 0) {
+	iounmap(lp->base);
+	lp->base = NULL;
+	return -1;
+    }
+    
+    ioaddr = dev->base_addr;
+    writeb(0x47, lp->base+0x800);	/* Config Option Register of LAN */
+    writeb(0x0,  lp->base+0x802);	/* Config and Status Register */
+
+    writeb(ioaddr & 0xff, lp->base+0x80a);	  /* I/O Base(Low) of LAN */
+    writeb((ioaddr >> 8) & 0xff, lp->base+0x80c); /* I/O Base(High) of LAN */
+   
+    writeb(0x45, lp->base+0x820);	/* Config Option Register of Modem */
+    writeb(0x8,  lp->base+0x822);	/* Config and Status Register */
+
+    return 0;
+
+}
+/*====================================================================*/
+
+static void fmvj18x_release(struct pcmcia_device *link)
+{
+
+    struct net_device *dev = link->priv;
+    struct local_info *lp = netdev_priv(dev);
+    u_char __iomem *tmp;
+
+    dev_dbg(&link->dev, "fmvj18x_release\n");
+
+    if (lp->base != NULL) {
+	tmp = lp->base;
+	lp->base = NULL;    /* set NULL before iounmap */
+	iounmap(tmp);
+    }
+
+    pcmcia_disable_device(link);
+
+}
+
+static int fmvj18x_suspend(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+
+	if (link->open)
+		netif_device_detach(dev);
+
+	return 0;
+}
+
+static int fmvj18x_resume(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+
+	if (link->open) {
+		fjn_reset(dev);
+		netif_device_attach(dev);
+	}
+
+	return 0;
+}
+
+/*====================================================================*/
+
+static const struct pcmcia_device_id fmvj18x_ids[] = {
+	PCMCIA_DEVICE_MANF_CARD(0x0004, 0x0004),
+	PCMCIA_DEVICE_PROD_ID12("EAGLE Technology", "NE200 ETHERNET LAN MBH10302 04", 0x528c88c4, 0x74f91e59),
+	PCMCIA_DEVICE_PROD_ID12("Eiger Labs,Inc", "EPX-10BT PC Card Ethernet 10BT", 0x53af556e, 0x877f9922),
+	PCMCIA_DEVICE_PROD_ID12("Eiger labs,Inc.", "EPX-10BT PC Card Ethernet 10BT", 0xf47e6c66, 0x877f9922),
+	PCMCIA_DEVICE_PROD_ID12("FUJITSU", "LAN Card(FMV-J182)", 0x6ee5a3d8, 0x5baf31db),
+	PCMCIA_DEVICE_PROD_ID12("FUJITSU", "MBH10308", 0x6ee5a3d8, 0x3f04875e),
+	PCMCIA_DEVICE_PROD_ID12("FUJITSU TOWA", "LA501", 0xb8451188, 0x12939ba2),
+	PCMCIA_DEVICE_PROD_ID12("HITACHI", "HT-4840-11", 0xf4f43949, 0x773910f4),
+	PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310B Ver1.0       ", 0x8cef4d3a, 0x075fc7b6),
+	PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310 Ver1.0        ", 0x8cef4d3a, 0xbccf43e6),
+	PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "10BASE_T CARD R280", 0x85c10e17, 0xd9413666),
+	PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CD02x", 0x1eae9475, 0x8fa0ee70),
+	PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CF010", 0x1eae9475, 0x7683bc9a),
+	PCMCIA_DEVICE_PROD_ID1("CONTEC Co.,Ltd.", 0x58d8fee2),
+	PCMCIA_DEVICE_PROD_ID1("PCMCIA LAN MBH10304  ES", 0x2599f454),
+	PCMCIA_DEVICE_PROD_ID1("PCMCIA MBH10302", 0x8f4005da),
+	PCMCIA_DEVICE_PROD_ID1("UBKK,V2.0", 0x90888080),
+	PCMCIA_PFC_DEVICE_PROD_ID12(0, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
+	PCMCIA_PFC_DEVICE_PROD_ID12(0, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
+	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0d0a),
+	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0e0a),
+	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0e01),
+	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0a05),
+	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0b05),
+	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x1101),
+	PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, fmvj18x_ids);
+
+static struct pcmcia_driver fmvj18x_cs_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "fmvj18x_cs",
+	.probe		= fmvj18x_probe,
+	.remove		= fmvj18x_detach,
+	.id_table       = fmvj18x_ids,
+	.suspend	= fmvj18x_suspend,
+	.resume		= fmvj18x_resume,
+};
+module_pcmcia_driver(fmvj18x_cs_driver);
+
+/*====================================================================*/
+
+static irqreturn_t fjn_interrupt(int dummy, void *dev_id)
+{
+    struct net_device *dev = dev_id;
+    struct local_info *lp = netdev_priv(dev);
+    unsigned int ioaddr;
+    unsigned short tx_stat, rx_stat;
+
+    ioaddr = dev->base_addr;
+
+    /* avoid multiple interrupts */
+    outw(0x0000, ioaddr + TX_INTR);
+
+    /* wait for a while */
+    udelay(1);
+
+    /* get status */
+    tx_stat = inb(ioaddr + TX_STATUS);
+    rx_stat = inb(ioaddr + RX_STATUS);
+
+    /* clear status */
+    outb(tx_stat, ioaddr + TX_STATUS);
+    outb(rx_stat, ioaddr + RX_STATUS);
+    
+    pr_debug("%s: interrupt, rx_status %02x.\n", dev->name, rx_stat);
+    pr_debug("               tx_status %02x.\n", tx_stat);
+    
+    if (rx_stat || (inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
+	/* there is packet(s) in rx buffer */
+	fjn_rx(dev);
+    }
+    if (tx_stat & F_TMT_RDY) {
+	dev->stats.tx_packets += lp->sent ;
+        lp->sent = 0 ;
+	if (lp->tx_queue) {
+	    outb(DO_TX | lp->tx_queue, ioaddr + TX_START);
+	    lp->sent = lp->tx_queue ;
+	    lp->tx_queue = 0;
+	    lp->tx_queue_len = 0;
+	    netif_trans_update(dev);
+	} else {
+	    lp->tx_started = 0;
+	}
+	netif_wake_queue(dev);
+    }
+    pr_debug("%s: exiting interrupt,\n", dev->name);
+    pr_debug("    tx_status %02x, rx_status %02x.\n", tx_stat, rx_stat);
+
+    outb(D_TX_INTR, ioaddr + TX_INTR);
+    outb(D_RX_INTR, ioaddr + RX_INTR);
+
+    if (lp->base != NULL) {
+	/* Ack interrupt for multifunction card */
+	writeb(0x01, lp->base+0x802);
+	writeb(0x09, lp->base+0x822);
+    }
+
+    return IRQ_HANDLED;
+
+} /* fjn_interrupt */
+
+/*====================================================================*/
+
+static void fjn_tx_timeout(struct net_device *dev, unsigned int txqueue)
+{
+    struct local_info *lp = netdev_priv(dev);
+    unsigned int ioaddr = dev->base_addr;
+
+    netdev_notice(dev, "transmit timed out with status %04x, %s?\n",
+		  htons(inw(ioaddr + TX_STATUS)),
+		  inb(ioaddr + TX_STATUS) & F_TMT_RDY
+		  ? "IRQ conflict" : "network cable problem");
+    netdev_notice(dev, "timeout registers: %04x %04x %04x "
+		  "%04x %04x %04x %04x %04x.\n",
+		  htons(inw(ioaddr + 0)), htons(inw(ioaddr + 2)),
+		  htons(inw(ioaddr + 4)), htons(inw(ioaddr + 6)),
+		  htons(inw(ioaddr + 8)), htons(inw(ioaddr + 10)),
+		  htons(inw(ioaddr + 12)), htons(inw(ioaddr + 14)));
+    dev->stats.tx_errors++;
+    /* ToDo: We should try to restart the adaptor... */
+    local_irq_disable();
+    fjn_reset(dev);
+
+    lp->tx_started = 0;
+    lp->tx_queue = 0;
+    lp->tx_queue_len = 0;
+    lp->sent = 0;
+    lp->open_time = jiffies;
+    local_irq_enable();
+    netif_wake_queue(dev);
+}
+
+static netdev_tx_t fjn_start_xmit(struct sk_buff *skb,
+					struct net_device *dev)
+{
+    struct local_info *lp = netdev_priv(dev);
+    unsigned int ioaddr = dev->base_addr;
+    short length = skb->len;
+    
+    if (length < ETH_ZLEN)
+    {
+	if (skb_padto(skb, ETH_ZLEN))
+		return NETDEV_TX_OK;
+	length = ETH_ZLEN;
+    }
+
+    netif_stop_queue(dev);
+
+    {
+	unsigned char *buf = skb->data;
+
+	if (length > ETH_FRAME_LEN) {
+	    netdev_notice(dev, "Attempting to send a large packet (%d bytes)\n",
+			  length);
+	    return NETDEV_TX_BUSY;
+	}
+
+	netdev_dbg(dev, "Transmitting a packet of length %lu\n",
+		   (unsigned long)skb->len);
+	dev->stats.tx_bytes += skb->len;
+
+	/* Disable both interrupts. */
+	outw(0x0000, ioaddr + TX_INTR);
+
+	/* wait for a while */
+	udelay(1);
+
+	outw(length, ioaddr + DATAPORT);
+	outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1);
+
+	lp->tx_queue++;
+	lp->tx_queue_len += ((length+3) & ~1);
+
+	if (lp->tx_started == 0) {
+	    /* If the Tx is idle, always trigger a transmit. */
+	    outb(DO_TX | lp->tx_queue, ioaddr + TX_START);
+	    lp->sent = lp->tx_queue ;
+	    lp->tx_queue = 0;
+	    lp->tx_queue_len = 0;
+	    lp->tx_started = 1;
+	    netif_start_queue(dev);
+	} else {
+	    if( sram_config == 0 ) {
+		if (lp->tx_queue_len < (4096 - (ETH_FRAME_LEN +2)) )
+		    /* Yes, there is room for one more packet. */
+		    netif_start_queue(dev);
+	    } else {
+		if (lp->tx_queue_len < (8192 - (ETH_FRAME_LEN +2)) && 
+						lp->tx_queue < 127 )
+		    /* Yes, there is room for one more packet. */
+		    netif_start_queue(dev);
+	    }
+	}
+
+	/* Re-enable interrupts */
+	outb(D_TX_INTR, ioaddr + TX_INTR);
+	outb(D_RX_INTR, ioaddr + RX_INTR);
+    }
+    dev_kfree_skb (skb);
+
+    return NETDEV_TX_OK;
+} /* fjn_start_xmit */
+
+/*====================================================================*/
+
+static void fjn_reset(struct net_device *dev)
+{
+    struct local_info *lp = netdev_priv(dev);
+    unsigned int ioaddr = dev->base_addr;
+    int i;
+
+    netdev_dbg(dev, "fjn_reset() called\n");
+
+    /* Reset controller */
+    if( sram_config == 0 ) 
+	outb(CONFIG0_RST, ioaddr + CONFIG_0);
+    else
+	outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
+
+    /* Power On chip and select bank 0 */
+    if (lp->cardtype == MBH10302)
+	outb(BANK_0, ioaddr + CONFIG_1);
+    else
+	outb(BANK_0U, ioaddr + CONFIG_1);
+
+    /* Set Tx modes */
+    outb(D_TX_MODE, ioaddr + TX_MODE);
+    /* set Rx modes */
+    outb(ID_MATCHED, ioaddr + RX_MODE);
+
+    /* Set hardware address */
+    for (i = 0; i < 6; i++) 
+        outb(dev->dev_addr[i], ioaddr + NODE_ID + i);
+
+    /* (re)initialize the multicast table */
+    set_rx_mode(dev);
+
+    /* Switch to bank 2 (runtime mode) */
+    if (lp->cardtype == MBH10302)
+	outb(BANK_2, ioaddr + CONFIG_1);
+    else
+	outb(BANK_2U, ioaddr + CONFIG_1);
+
+    /* set 16col ctrl bits */
+    if( lp->cardtype == TDK || lp->cardtype == CONTEC) 
+        outb(TDK_AUTO_MODE, ioaddr + COL_CTRL);
+    else
+        outb(AUTO_MODE, ioaddr + COL_CTRL);
+
+    /* clear Reserved Regs */
+    outb(0x00, ioaddr + BMPR12);
+    outb(0x00, ioaddr + BMPR13);
+
+    /* reset Skip packet reg. */
+    outb(0x01, ioaddr + RX_SKIP);
+
+    /* Enable Tx and Rx */
+    if( sram_config == 0 )
+	outb(CONFIG0_DFL, ioaddr + CONFIG_0);
+    else
+	outb(CONFIG0_DFL_1, ioaddr + CONFIG_0);
+
+    /* Init receive pointer ? */
+    inw(ioaddr + DATAPORT);
+    inw(ioaddr + DATAPORT);
+
+    /* Clear all status */
+    outb(0xff, ioaddr + TX_STATUS);
+    outb(0xff, ioaddr + RX_STATUS);
+
+    if (lp->cardtype == MBH10302)
+	outb(INTR_OFF, ioaddr + LAN_CTRL);
+
+    /* Turn on Rx interrupts */
+    outb(D_TX_INTR, ioaddr + TX_INTR);
+    outb(D_RX_INTR, ioaddr + RX_INTR);
+
+    /* Turn on interrupts from LAN card controller */
+    if (lp->cardtype == MBH10302)
+	outb(INTR_ON, ioaddr + LAN_CTRL);
+} /* fjn_reset */
+
+/*====================================================================*/
+
+static void fjn_rx(struct net_device *dev)
+{
+    unsigned int ioaddr = dev->base_addr;
+    int boguscount = 10;	/* 5 -> 10: by agy 19940922 */
+
+    pr_debug("%s: in rx_packet(), rx_status %02x.\n",
+	  dev->name, inb(ioaddr + RX_STATUS));
+
+    while ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
+	u_short status = inw(ioaddr + DATAPORT);
+
+	netdev_dbg(dev, "Rxing packet mode %02x status %04x.\n",
+		   inb(ioaddr + RX_MODE), status);
+#ifndef final_version
+	if (status == 0) {
+	    outb(F_SKP_PKT, ioaddr + RX_SKIP);
+	    break;
+	}
+#endif
+	if ((status & 0xF0) != 0x20) {	/* There was an error. */
+	    dev->stats.rx_errors++;
+	    if (status & F_LEN_ERR) dev->stats.rx_length_errors++;
+	    if (status & F_ALG_ERR) dev->stats.rx_frame_errors++;
+	    if (status & F_CRC_ERR) dev->stats.rx_crc_errors++;
+	    if (status & F_OVR_FLO) dev->stats.rx_over_errors++;
+	} else {
+	    u_short pkt_len = inw(ioaddr + DATAPORT);
+	    /* Malloc up new buffer. */
+	    struct sk_buff *skb;
+
+	    if (pkt_len > 1550) {
+		netdev_notice(dev, "The FMV-18x claimed a very large packet, size %d\n",
+			      pkt_len);
+		outb(F_SKP_PKT, ioaddr + RX_SKIP);
+		dev->stats.rx_errors++;
+		break;
+	    }
+	    skb = netdev_alloc_skb(dev, pkt_len + 2);
+	    if (skb == NULL) {
+		outb(F_SKP_PKT, ioaddr + RX_SKIP);
+		dev->stats.rx_dropped++;
+		break;
+	    }
+
+	    skb_reserve(skb, 2);
+	    insw(ioaddr + DATAPORT, skb_put(skb, pkt_len),
+		 (pkt_len + 1) >> 1);
+	    skb->protocol = eth_type_trans(skb, dev);
+
+	    {
+		int i;
+		pr_debug("%s: Rxed packet of length %d: ",
+			dev->name, pkt_len);
+		for (i = 0; i < 14; i++)
+			pr_debug(" %02x", skb->data[i]);
+		pr_debug(".\n");
+	    }
+
+	    netif_rx(skb);
+	    dev->stats.rx_packets++;
+	    dev->stats.rx_bytes += pkt_len;
+	}
+	if (--boguscount <= 0)
+	    break;
+    }
+
+    /* If any worth-while packets have been received, dev_rint()
+	   has done a netif_wake_queue() for us and will work on them
+	   when we get to the bottom-half routine. */
+/*
+    if (lp->cardtype != TDK) {
+	int i;
+	for (i = 0; i < 20; i++) {
+	    if ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == F_BUF_EMP)
+		break;
+	    (void)inw(ioaddr + DATAPORT);  /+ dummy status read +/
+	    outb(F_SKP_PKT, ioaddr + RX_SKIP);
+	}
+
+	if (i > 0)
+	    pr_debug("%s: Exint Rx packet with mode %02x after "
+		  "%d ticks.\n", dev->name, inb(ioaddr + RX_MODE), i);
+    }
+*/
+} /* fjn_rx */
+
+/*====================================================================*/
+
+static void netdev_get_drvinfo(struct net_device *dev,
+			       struct ethtool_drvinfo *info)
+{
+	strscpy(info->driver, DRV_NAME, sizeof(info->driver));
+	strscpy(info->version, DRV_VERSION, sizeof(info->version));
+	snprintf(info->bus_info, sizeof(info->bus_info),
+		"PCMCIA 0x%lx", dev->base_addr);
+}
+
+static const struct ethtool_ops netdev_ethtool_ops = {
+	.get_drvinfo		= netdev_get_drvinfo,
+};
+
+static int fjn_config(struct net_device *dev, struct ifmap *map){
+    return 0;
+}
+
+static int fjn_open(struct net_device *dev)
+{
+    struct local_info *lp = netdev_priv(dev);
+    struct pcmcia_device *link = lp->p_dev;
+
+    pr_debug("fjn_open('%s').\n", dev->name);
+
+    if (!pcmcia_dev_present(link))
+	return -ENODEV;
+    
+    link->open++;
+    
+    fjn_reset(dev);
+    
+    lp->tx_started = 0;
+    lp->tx_queue = 0;
+    lp->tx_queue_len = 0;
+    lp->open_time = jiffies;
+    netif_start_queue(dev);
+    
+    return 0;
+} /* fjn_open */
+
+/*====================================================================*/
+
+static int fjn_close(struct net_device *dev)
+{
+    struct local_info *lp = netdev_priv(dev);
+    struct pcmcia_device *link = lp->p_dev;
+    unsigned int ioaddr = dev->base_addr;
+
+    pr_debug("fjn_close('%s').\n", dev->name);
+
+    lp->open_time = 0;
+    netif_stop_queue(dev);
+
+    /* Set configuration register 0 to disable Tx and Rx. */
+    if( sram_config == 0 ) 
+	outb(CONFIG0_RST ,ioaddr + CONFIG_0);
+    else
+	outb(CONFIG0_RST_1 ,ioaddr + CONFIG_0);
+
+    /* Update the statistics -- ToDo. */
+
+    /* Power-down the chip.  Green, green, green! */
+    outb(CHIP_OFF ,ioaddr + CONFIG_1);
+
+    /* Set the ethernet adaptor disable IRQ */
+    if (lp->cardtype == MBH10302)
+	outb(INTR_OFF, ioaddr + LAN_CTRL);
+
+    link->open--;
+
+    return 0;
+} /* fjn_close */
+
+/*====================================================================*/
+
+/*
+  Set the multicast/promiscuous mode for this adaptor.
+*/
+
+static void set_rx_mode(struct net_device *dev)
+{
+    unsigned int ioaddr = dev->base_addr;
+    u_char mc_filter[8];		 /* Multicast hash filter */
+    u_long flags;
+    int i;
+    
+    int saved_bank;
+    int saved_config_0 = inb(ioaddr + CONFIG_0);
+     
+    local_irq_save(flags); 
+
+    /* Disable Tx and Rx */
+    if (sram_config == 0) 
+	outb(CONFIG0_RST, ioaddr + CONFIG_0);
+    else
+	outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
+
+    if (dev->flags & IFF_PROMISC) {
+	memset(mc_filter, 0xff, sizeof(mc_filter));
+	outb(3, ioaddr + RX_MODE);	/* Enable promiscuous mode */
+    } else if (netdev_mc_count(dev) > MC_FILTERBREAK ||
+	       (dev->flags & IFF_ALLMULTI)) {
+	/* Too many to filter perfectly -- accept all multicasts. */
+	memset(mc_filter, 0xff, sizeof(mc_filter));
+	outb(2, ioaddr + RX_MODE);	/* Use normal mode. */
+    } else if (netdev_mc_empty(dev)) {
+	memset(mc_filter, 0x00, sizeof(mc_filter));
+	outb(1, ioaddr + RX_MODE);	/* Ignore almost all multicasts. */
+    } else {
+	struct netdev_hw_addr *ha;
+
+	memset(mc_filter, 0, sizeof(mc_filter));
+	netdev_for_each_mc_addr(ha, dev) {
+	    unsigned int bit = ether_crc_le(ETH_ALEN, ha->addr) >> 26;
+	    mc_filter[bit >> 3] |= (1 << (bit & 7));
+	}
+	outb(2, ioaddr + RX_MODE);	/* Use normal mode. */
+    }
+
+    /* Switch to bank 1 and set the multicast table. */
+    saved_bank = inb(ioaddr + CONFIG_1);
+    outb(0xe4, ioaddr + CONFIG_1);
+
+    for (i = 0; i < 8; i++)
+	outb(mc_filter[i], ioaddr + MAR_ADR + i);
+    outb(saved_bank, ioaddr + CONFIG_1);
+
+    outb(saved_config_0, ioaddr + CONFIG_0);
+
+    local_irq_restore(flags);
+}