Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 189 insertions, 0 deletions

diff --git a/drivers/net/usb/int51x1.c b/drivers/net/usb/int51x1.c
new file mode 100644
index 000000000..6fde41550
--- /dev/null
+++ b/drivers/net/usb/int51x1.c
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2009 Peter Holik
+ *
+ * Intellon usb PLC (Powerline Communications) usb net driver
+ *
+ * http://www.tandel.be/downloads/INT51X1_Datasheet.pdf
+ *
+ * Based on the work of Jan 'RedBully' Seiffert
+ */
+
+/*
+ */
+
+#include <linux/module.h>
+#include <linux/ctype.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/slab.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/usbnet.h>
+
+#define INT51X1_VENDOR_ID	0x09e1
+#define INT51X1_PRODUCT_ID	0x5121
+
+#define INT51X1_HEADER_SIZE	2	/* 2 byte header */
+
+#define PACKET_TYPE_PROMISCUOUS		(1 << 0)
+#define PACKET_TYPE_ALL_MULTICAST	(1 << 1) /* no filter */
+#define PACKET_TYPE_DIRECTED		(1 << 2)
+#define PACKET_TYPE_BROADCAST		(1 << 3)
+#define PACKET_TYPE_MULTICAST		(1 << 4) /* filtered */
+
+#define SET_ETHERNET_PACKET_FILTER	0x43
+
+static int int51x1_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	int len;
+
+	if (!(pskb_may_pull(skb, INT51X1_HEADER_SIZE))) {
+		netdev_err(dev->net, "unexpected tiny rx frame\n");
+		return 0;
+	}
+
+	len = le16_to_cpu(*(__le16 *)&skb->data[skb->len - 2]);
+
+	skb_trim(skb, len);
+
+	return 1;
+}
+
+static struct sk_buff *int51x1_tx_fixup(struct usbnet *dev,
+		struct sk_buff *skb, gfp_t flags)
+{
+	int pack_len = skb->len;
+	int pack_with_header_len = pack_len + INT51X1_HEADER_SIZE;
+	int headroom = skb_headroom(skb);
+	int tailroom = skb_tailroom(skb);
+	int need_tail = 0;
+	__le16 *len;
+
+	/* if packet and our header is smaller than 64 pad to 64 (+ ZLP) */
+	if ((pack_with_header_len) < dev->maxpacket)
+		need_tail = dev->maxpacket - pack_with_header_len + 1;
+	/*
+	 * usbnet would send a ZLP if packetlength mod urbsize == 0 for us,
+	 * but we need to know ourself, because this would add to the length
+	 * we send down to the device...
+	 */
+	else if (!(pack_with_header_len % dev->maxpacket))
+		need_tail = 1;
+
+	if (!skb_cloned(skb) &&
+			(headroom + tailroom >= need_tail + INT51X1_HEADER_SIZE)) {
+		if (headroom < INT51X1_HEADER_SIZE || tailroom < need_tail) {
+			skb->data = memmove(skb->head + INT51X1_HEADER_SIZE,
+					skb->data, skb->len);
+			skb_set_tail_pointer(skb, skb->len);
+		}
+	} else {
+		struct sk_buff *skb2;
+
+		skb2 = skb_copy_expand(skb,
+				INT51X1_HEADER_SIZE,
+				need_tail,
+				flags);
+		dev_kfree_skb_any(skb);
+		if (!skb2)
+			return NULL;
+		skb = skb2;
+	}
+
+	pack_len += need_tail;
+	pack_len &= 0x07ff;
+
+	len = __skb_push(skb, INT51X1_HEADER_SIZE);
+	*len = cpu_to_le16(pack_len);
+
+	if(need_tail)
+		__skb_put_zero(skb, need_tail);
+
+	return skb;
+}
+
+static void int51x1_set_multicast(struct net_device *netdev)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	u16 filter = PACKET_TYPE_DIRECTED | PACKET_TYPE_BROADCAST;
+
+	if (netdev->flags & IFF_PROMISC) {
+		/* do not expect to see traffic of other PLCs */
+		filter |= PACKET_TYPE_PROMISCUOUS;
+		netdev_info(dev->net, "promiscuous mode enabled\n");
+	} else if (!netdev_mc_empty(netdev) ||
+		  (netdev->flags & IFF_ALLMULTI)) {
+		filter |= PACKET_TYPE_ALL_MULTICAST;
+		netdev_dbg(dev->net, "receive all multicast enabled\n");
+	} else {
+		/* ~PROMISCUOUS, ~MULTICAST */
+		netdev_dbg(dev->net, "receive own packets only\n");
+	}
+
+	usbnet_write_cmd_async(dev, SET_ETHERNET_PACKET_FILTER,
+			       USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			       filter, 0, NULL, 0);
+}
+
+static const struct net_device_ops int51x1_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_get_stats64	= dev_get_tstats64,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_rx_mode	= int51x1_set_multicast,
+};
+
+static int int51x1_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int status = usbnet_get_ethernet_addr(dev, 3);
+
+	if (status)
+		return status;
+
+	dev->net->hard_header_len += INT51X1_HEADER_SIZE;
+	dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+	dev->net->netdev_ops = &int51x1_netdev_ops;
+
+	return usbnet_get_endpoints(dev, intf);
+}
+
+static const struct driver_info int51x1_info = {
+	.description = "Intellon usb powerline adapter",
+	.bind        = int51x1_bind,
+	.rx_fixup    = int51x1_rx_fixup,
+	.tx_fixup    = int51x1_tx_fixup,
+	.in          = 1,
+	.out         = 2,
+	.flags       = FLAG_ETHER,
+};
+
+static const struct usb_device_id products[] = {
+	{
+	USB_DEVICE(INT51X1_VENDOR_ID, INT51X1_PRODUCT_ID),
+		.driver_info = (unsigned long) &int51x1_info,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver int51x1_driver = {
+	.name       = "int51x1",
+	.id_table   = products,
+	.probe      = usbnet_probe,
+	.disconnect = usbnet_disconnect,
+	.suspend    = usbnet_suspend,
+	.resume     = usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(int51x1_driver);
+
+MODULE_AUTHOR("Peter Holik");
+MODULE_DESCRIPTION("Intellon usb powerline adapter");
+MODULE_LICENSE("GPL");