Merging upstream version 6.1.85.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 89 insertions, 74 deletions

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 4086a7818..506d6d061 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -669,8 +669,13 @@ int dw_pcie_ep_init_complete(struct dw_pcie_ep *ep)
 		nbars = (reg & PCI_REBAR_CTRL_NBAR_MASK) >>
 			PCI_REBAR_CTRL_NBAR_SHIFT;
 
+		/*
+		 * PCIe r6.0, sec 7.8.6.2 require us to support at least one
+		 * size in the range from 1 MB to 512 GB. Advertise support
+		 * for 1 MB BAR size only.
+		 */
 		for (i = 0; i < nbars; i++, offset += PCI_REBAR_CTRL)
-			dw_pcie_writel_dbi(pci, offset + PCI_REBAR_CAP, 0x0);
+			dw_pcie_writel_dbi(pci, offset + PCI_REBAR_CAP, BIT(4));
 	}
 
 	dw_pcie_setup(pci);
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 0ccd92faf..0bad23ec5 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -50,6 +50,7 @@
 #define PARF_SLV_ADDR_SPACE_SIZE		0x358
 #define PARF_DEVICE_TYPE			0x1000
 #define PARF_BDF_TO_SID_TABLE_N			0x2000
+#define PARF_BDF_TO_SID_CFG			0x2c00
 
 /* ELBI registers */
 #define ELBI_SYS_CTRL				0x04
@@ -102,6 +103,9 @@
 /* PARF_DEVICE_TYPE register fields */
 #define DEVICE_TYPE_RC				0x4
 
+/* PARF_BDF_TO_SID_CFG fields */
+#define BDF_TO_SID_BYPASS			BIT(0)
+
 /* ELBI_SYS_CTRL register fields */
 #define ELBI_SYS_CTRL_LT_ENABLE			BIT(0)
 
@@ -1312,6 +1316,82 @@ static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie)
 	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
 }
 
+static int qcom_pcie_config_sid_1_9_0(struct qcom_pcie *pcie)
+{
+	/* iommu map structure */
+	struct {
+		u32 bdf;
+		u32 phandle;
+		u32 smmu_sid;
+		u32 smmu_sid_len;
+	} *map;
+	void __iomem *bdf_to_sid_base = pcie->parf + PARF_BDF_TO_SID_TABLE_N;
+	struct device *dev = pcie->pci->dev;
+	u8 qcom_pcie_crc8_table[CRC8_TABLE_SIZE];
+	int i, nr_map, size = 0;
+	u32 smmu_sid_base;
+	u32 val;
+
+	of_get_property(dev->of_node, "iommu-map", &size);
+	if (!size)
+		return 0;
+
+	/* Enable BDF to SID translation by disabling bypass mode (default) */
+	val = readl(pcie->parf + PARF_BDF_TO_SID_CFG);
+	val &= ~BDF_TO_SID_BYPASS;
+	writel(val, pcie->parf + PARF_BDF_TO_SID_CFG);
+
+	map = kzalloc(size, GFP_KERNEL);
+	if (!map)
+		return -ENOMEM;
+
+	of_property_read_u32_array(dev->of_node, "iommu-map", (u32 *)map,
+				   size / sizeof(u32));
+
+	nr_map = size / (sizeof(*map));
+
+	crc8_populate_msb(qcom_pcie_crc8_table, QCOM_PCIE_CRC8_POLYNOMIAL);
+
+	/* Registers need to be zero out first */
+	memset_io(bdf_to_sid_base, 0, CRC8_TABLE_SIZE * sizeof(u32));
+
+	/* Extract the SMMU SID base from the first entry of iommu-map */
+	smmu_sid_base = map[0].smmu_sid;
+
+	/* Look for an available entry to hold the mapping */
+	for (i = 0; i < nr_map; i++) {
+		__be16 bdf_be = cpu_to_be16(map[i].bdf);
+		u32 val;
+		u8 hash;
+
+		hash = crc8(qcom_pcie_crc8_table, (u8 *)&bdf_be, sizeof(bdf_be), 0);
+
+		val = readl(bdf_to_sid_base + hash * sizeof(u32));
+
+		/* If the register is already populated, look for next available entry */
+		while (val) {
+			u8 current_hash = hash++;
+			u8 next_mask = 0xff;
+
+			/* If NEXT field is NULL then update it with next hash */
+			if (!(val & next_mask)) {
+				val |= (u32)hash;
+				writel(val, bdf_to_sid_base + current_hash * sizeof(u32));
+			}
+
+			val = readl(bdf_to_sid_base + hash * sizeof(u32));
+		}
+
+		/* BDF [31:16] | SID [15:8] | NEXT [7:0] */
+		val = map[i].bdf << 16 | (map[i].smmu_sid - smmu_sid_base) << 8 | 0;
+		writel(val, bdf_to_sid_base + hash * sizeof(u32));
+	}
+
+	kfree(map);
+
+	return 0;
+}
+
 static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0;
@@ -1429,77 +1509,6 @@ static int qcom_pcie_link_up(struct dw_pcie *pci)
 	return !!(val & PCI_EXP_LNKSTA_DLLLA);
 }
 
-static int qcom_pcie_config_sid_sm8250(struct qcom_pcie *pcie)
-{
-	/* iommu map structure */
-	struct {
-		u32 bdf;
-		u32 phandle;
-		u32 smmu_sid;
-		u32 smmu_sid_len;
-	} *map;
-	void __iomem *bdf_to_sid_base = pcie->parf + PARF_BDF_TO_SID_TABLE_N;
-	struct device *dev = pcie->pci->dev;
-	u8 qcom_pcie_crc8_table[CRC8_TABLE_SIZE];
-	int i, nr_map, size = 0;
-	u32 smmu_sid_base;
-
-	of_get_property(dev->of_node, "iommu-map", &size);
-	if (!size)
-		return 0;
-
-	map = kzalloc(size, GFP_KERNEL);
-	if (!map)
-		return -ENOMEM;
-
-	of_property_read_u32_array(dev->of_node,
-		"iommu-map", (u32 *)map, size / sizeof(u32));
-
-	nr_map = size / (sizeof(*map));
-
-	crc8_populate_msb(qcom_pcie_crc8_table, QCOM_PCIE_CRC8_POLYNOMIAL);
-
-	/* Registers need to be zero out first */
-	memset_io(bdf_to_sid_base, 0, CRC8_TABLE_SIZE * sizeof(u32));
-
-	/* Extract the SMMU SID base from the first entry of iommu-map */
-	smmu_sid_base = map[0].smmu_sid;
-
-	/* Look for an available entry to hold the mapping */
-	for (i = 0; i < nr_map; i++) {
-		__be16 bdf_be = cpu_to_be16(map[i].bdf);
-		u32 val;
-		u8 hash;
-
-		hash = crc8(qcom_pcie_crc8_table, (u8 *)&bdf_be, sizeof(bdf_be),
-			0);
-
-		val = readl(bdf_to_sid_base + hash * sizeof(u32));
-
-		/* If the register is already populated, look for next available entry */
-		while (val) {
-			u8 current_hash = hash++;
-			u8 next_mask = 0xff;
-
-			/* If NEXT field is NULL then update it with next hash */
-			if (!(val & next_mask)) {
-				val |= (u32)hash;
-				writel(val, bdf_to_sid_base + current_hash * sizeof(u32));
-			}
-
-			val = readl(bdf_to_sid_base + hash * sizeof(u32));
-		}
-
-		/* BDF [31:16] | SID [15:8] | NEXT [7:0] */
-		val = map[i].bdf << 16 | (map[i].smmu_sid - smmu_sid_base) << 8 | 0;
-		writel(val, bdf_to_sid_base + hash * sizeof(u32));
-	}
-
-	kfree(map);
-
-	return 0;
-}
-
 static int qcom_pcie_host_init(struct dw_pcie_rp *pp)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
@@ -1616,7 +1625,7 @@ static const struct qcom_pcie_ops ops_1_9_0 = {
 	.init = qcom_pcie_init_2_7_0,
 	.deinit = qcom_pcie_deinit_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
-	.config_sid = qcom_pcie_config_sid_sm8250,
+	.config_sid = qcom_pcie_config_sid_1_9_0,
 };
 
 /* Qcom IP rev.: 2.9.0  Synopsys IP rev.: 5.00a */
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index 9693bab59..b36cbc913 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -49,6 +49,7 @@
 #include <linux/refcount.h>
 #include <linux/irqdomain.h>
 #include <linux/acpi.h>
+#include <linux/sizes.h>
 #include <asm/mshyperv.h>
 
 /*
@@ -465,7 +466,7 @@ struct pci_eject_response {
 	u32 status;
 } __packed;
 
-static int pci_ring_size = (4 * PAGE_SIZE);
+static int pci_ring_size = VMBUS_RING_SIZE(SZ_16K);
 
 /*
  * Driver specific state.