Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 360 insertions, 0 deletions

diff --git a/drivers/phy/ralink/phy-mt7621-pci.c b/drivers/phy/ralink/phy-mt7621-pci.c
new file mode 100644
index 000000000..85888ab2d
--- /dev/null
+++ b/drivers/phy/ralink/phy-mt7621-pci.c
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Mediatek MT7621 PCI PHY Driver
+ * Author: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <linux/clk.h>
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/sys_soc.h>
+
+#define RG_PE1_PIPE_REG				0x02c
+#define RG_PE1_PIPE_RST				BIT(12)
+#define RG_PE1_PIPE_CMD_FRC			BIT(4)
+
+#define RG_P0_TO_P1_WIDTH			0x100
+#define RG_PE1_H_LCDDS_REG			0x49c
+#define RG_PE1_H_LCDDS_PCW			GENMASK(30, 0)
+
+#define RG_PE1_FRC_H_XTAL_REG			0x400
+#define RG_PE1_FRC_H_XTAL_TYPE			BIT(8)
+#define RG_PE1_H_XTAL_TYPE			GENMASK(10, 9)
+
+#define RG_PE1_FRC_PHY_REG			0x000
+#define RG_PE1_FRC_PHY_EN			BIT(4)
+#define RG_PE1_PHY_EN				BIT(5)
+
+#define RG_PE1_H_PLL_REG			0x490
+#define RG_PE1_H_PLL_BC				GENMASK(23, 22)
+#define RG_PE1_H_PLL_BP				GENMASK(21, 18)
+#define RG_PE1_H_PLL_IR				GENMASK(15, 12)
+#define RG_PE1_H_PLL_IC				GENMASK(11, 8)
+#define RG_PE1_H_PLL_PREDIV			GENMASK(7, 6)
+#define RG_PE1_PLL_DIVEN			GENMASK(3, 1)
+
+#define RG_PE1_H_PLL_FBKSEL_REG			0x4bc
+#define RG_PE1_H_PLL_FBKSEL			GENMASK(5, 4)
+
+#define	RG_PE1_H_LCDDS_SSC_PRD_REG		0x4a4
+#define RG_PE1_H_LCDDS_SSC_PRD			GENMASK(15, 0)
+
+#define RG_PE1_H_LCDDS_SSC_DELTA_REG		0x4a8
+#define RG_PE1_H_LCDDS_SSC_DELTA		GENMASK(11, 0)
+#define RG_PE1_H_LCDDS_SSC_DELTA1		GENMASK(27, 16)
+
+#define RG_PE1_LCDDS_CLK_PH_INV_REG		0x4a0
+#define RG_PE1_LCDDS_CLK_PH_INV			BIT(5)
+
+#define RG_PE1_H_PLL_BR_REG			0x4ac
+#define RG_PE1_H_PLL_BR				GENMASK(18, 16)
+
+#define	RG_PE1_MSTCKDIV_REG			0x414
+#define RG_PE1_MSTCKDIV				GENMASK(7, 6)
+
+#define RG_PE1_FRC_MSTCKDIV			BIT(5)
+
+#define MAX_PHYS	2
+
+/**
+ * struct mt7621_pci_phy - Mt7621 Pcie PHY core
+ * @dev: pointer to device
+ * @regmap: kernel regmap pointer
+ * @phy: pointer to the kernel PHY device
+ * @sys_clk: pointer to the system XTAL clock
+ * @port_base: base register
+ * @has_dual_port: if the phy has dual ports.
+ * @bypass_pipe_rst: mark if 'mt7621_bypass_pipe_rst'
+ * needs to be executed. Depends on chip revision.
+ */
+struct mt7621_pci_phy {
+	struct device *dev;
+	struct regmap *regmap;
+	struct phy *phy;
+	struct clk *sys_clk;
+	void __iomem *port_base;
+	bool has_dual_port;
+	bool bypass_pipe_rst;
+};
+
+static inline void mt7621_phy_rmw(struct mt7621_pci_phy *phy,
+				  u32 reg, u32 clr, u32 set)
+{
+	u32 val;
+
+	/*
+	 * We cannot use 'regmap_write_bits' here because internally
+	 * 'set' is masked before is set to the value that will be
+	 * written to the register. That way results in no reliable
+	 * pci setup. Avoid to mask 'set' before set value to 'val'
+	 * completely avoid the problem.
+	 */
+	regmap_read(phy->regmap, reg, &val);
+	val &= ~clr;
+	val |= set;
+	regmap_write(phy->regmap, reg, val);
+}
+
+static void mt7621_bypass_pipe_rst(struct mt7621_pci_phy *phy)
+{
+	mt7621_phy_rmw(phy, RG_PE1_PIPE_REG, 0, RG_PE1_PIPE_RST);
+	mt7621_phy_rmw(phy, RG_PE1_PIPE_REG, 0, RG_PE1_PIPE_CMD_FRC);
+
+	if (phy->has_dual_port) {
+		mt7621_phy_rmw(phy, RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH,
+			       0, RG_PE1_PIPE_RST);
+		mt7621_phy_rmw(phy, RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH,
+			       0, RG_PE1_PIPE_CMD_FRC);
+	}
+}
+
+static int mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy)
+{
+	struct device *dev = phy->dev;
+	unsigned long clk_rate;
+
+	clk_rate = clk_get_rate(phy->sys_clk);
+	if (!clk_rate)
+		return -EINVAL;
+
+	/* Set PCIe Port PHY to disable SSC */
+	/* Debug Xtal Type */
+	mt7621_phy_rmw(phy, RG_PE1_FRC_H_XTAL_REG,
+		       RG_PE1_FRC_H_XTAL_TYPE | RG_PE1_H_XTAL_TYPE,
+		       RG_PE1_FRC_H_XTAL_TYPE |
+		       FIELD_PREP(RG_PE1_H_XTAL_TYPE, 0x00));
+
+	/* disable port */
+	mt7621_phy_rmw(phy, RG_PE1_FRC_PHY_REG, RG_PE1_PHY_EN,
+		       RG_PE1_FRC_PHY_EN);
+
+	if (phy->has_dual_port) {
+		mt7621_phy_rmw(phy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH,
+			       RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN);
+	}
+
+	if (clk_rate == 40000000) { /* 40MHz Xtal */
+		/* Set Pre-divider ratio (for host mode) */
+		mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
+			       FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x01));
+
+		dev_dbg(dev, "Xtal is 40MHz\n");
+	} else if (clk_rate == 25000000) { /* 25MHz Xal */
+		mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
+			       FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x00));
+
+		/* Select feedback clock */
+		mt7621_phy_rmw(phy, RG_PE1_H_PLL_FBKSEL_REG,
+			       RG_PE1_H_PLL_FBKSEL,
+			       FIELD_PREP(RG_PE1_H_PLL_FBKSEL, 0x01));
+
+		/* DDS NCPO PCW (for host mode) */
+		mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_PRD_REG,
+			       RG_PE1_H_LCDDS_SSC_PRD,
+			       FIELD_PREP(RG_PE1_H_LCDDS_SSC_PRD, 0x00));
+
+		/* DDS SSC dither period control */
+		mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_PRD_REG,
+			       RG_PE1_H_LCDDS_SSC_PRD,
+			       FIELD_PREP(RG_PE1_H_LCDDS_SSC_PRD, 0x18d));
+
+		/* DDS SSC dither amplitude control */
+		mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_DELTA_REG,
+			       RG_PE1_H_LCDDS_SSC_DELTA |
+			       RG_PE1_H_LCDDS_SSC_DELTA1,
+			       FIELD_PREP(RG_PE1_H_LCDDS_SSC_DELTA, 0x4a) |
+			       FIELD_PREP(RG_PE1_H_LCDDS_SSC_DELTA1, 0x4a));
+
+		dev_dbg(dev, "Xtal is 25MHz\n");
+	} else { /* 20MHz Xtal */
+		mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
+			       FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x00));
+
+		dev_dbg(dev, "Xtal is 20MHz\n");
+	}
+
+	/* DDS clock inversion */
+	mt7621_phy_rmw(phy, RG_PE1_LCDDS_CLK_PH_INV_REG,
+		       RG_PE1_LCDDS_CLK_PH_INV, RG_PE1_LCDDS_CLK_PH_INV);
+
+	/* Set PLL bits */
+	mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG,
+		       RG_PE1_H_PLL_BC | RG_PE1_H_PLL_BP | RG_PE1_H_PLL_IR |
+		       RG_PE1_H_PLL_IC | RG_PE1_PLL_DIVEN,
+		       FIELD_PREP(RG_PE1_H_PLL_BC, 0x02) |
+		       FIELD_PREP(RG_PE1_H_PLL_BP, 0x06) |
+		       FIELD_PREP(RG_PE1_H_PLL_IR, 0x02) |
+		       FIELD_PREP(RG_PE1_H_PLL_IC, 0x01) |
+		       FIELD_PREP(RG_PE1_PLL_DIVEN, 0x02));
+
+	mt7621_phy_rmw(phy, RG_PE1_H_PLL_BR_REG, RG_PE1_H_PLL_BR,
+		       FIELD_PREP(RG_PE1_H_PLL_BR, 0x00));
+
+	if (clk_rate == 40000000) { /* 40MHz Xtal */
+		/* set force mode enable of da_pe1_mstckdiv */
+		mt7621_phy_rmw(phy, RG_PE1_MSTCKDIV_REG,
+			       RG_PE1_MSTCKDIV | RG_PE1_FRC_MSTCKDIV,
+			       FIELD_PREP(RG_PE1_MSTCKDIV, 0x01) |
+			       RG_PE1_FRC_MSTCKDIV);
+	}
+
+	return 0;
+}
+
+static int mt7621_pci_phy_init(struct phy *phy)
+{
+	struct mt7621_pci_phy *mphy = phy_get_drvdata(phy);
+
+	if (mphy->bypass_pipe_rst)
+		mt7621_bypass_pipe_rst(mphy);
+
+	return mt7621_set_phy_for_ssc(mphy);
+}
+
+static int mt7621_pci_phy_power_on(struct phy *phy)
+{
+	struct mt7621_pci_phy *mphy = phy_get_drvdata(phy);
+
+	/* Enable PHY and disable force mode */
+	mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG,
+		       RG_PE1_FRC_PHY_EN, RG_PE1_PHY_EN);
+
+	if (mphy->has_dual_port) {
+		mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH,
+			       RG_PE1_FRC_PHY_EN, RG_PE1_PHY_EN);
+	}
+
+	return 0;
+}
+
+static int mt7621_pci_phy_power_off(struct phy *phy)
+{
+	struct mt7621_pci_phy *mphy = phy_get_drvdata(phy);
+
+	/* Disable PHY */
+	mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG,
+		       RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN);
+
+	if (mphy->has_dual_port) {
+		mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH,
+			       RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN);
+	}
+
+	return 0;
+}
+
+static int mt7621_pci_phy_exit(struct phy *phy)
+{
+	return 0;
+}
+
+static const struct phy_ops mt7621_pci_phy_ops = {
+	.init		= mt7621_pci_phy_init,
+	.exit		= mt7621_pci_phy_exit,
+	.power_on	= mt7621_pci_phy_power_on,
+	.power_off	= mt7621_pci_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static struct phy *mt7621_pcie_phy_of_xlate(struct device *dev,
+					    struct of_phandle_args *args)
+{
+	struct mt7621_pci_phy *mt7621_phy = dev_get_drvdata(dev);
+
+	if (WARN_ON(args->args[0] >= MAX_PHYS))
+		return ERR_PTR(-ENODEV);
+
+	mt7621_phy->has_dual_port = args->args[0];
+
+	dev_dbg(dev, "PHY for 0x%px (dual port = %d)\n",
+		mt7621_phy->port_base, mt7621_phy->has_dual_port);
+
+	return mt7621_phy->phy;
+}
+
+static const struct soc_device_attribute mt7621_pci_quirks_match[] = {
+	{ .soc_id = "mt7621", .revision = "E2" },
+	{ /* sentinel */ }
+};
+
+static const struct regmap_config mt7621_pci_phy_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = 0x700,
+};
+
+static int mt7621_pci_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct soc_device_attribute *attr;
+	struct phy_provider *provider;
+	struct mt7621_pci_phy *phy;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	attr = soc_device_match(mt7621_pci_quirks_match);
+	if (attr)
+		phy->bypass_pipe_rst = true;
+
+	phy->dev = dev;
+	platform_set_drvdata(pdev, phy);
+
+	phy->port_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(phy->port_base)) {
+		dev_err(dev, "failed to remap phy regs\n");
+		return PTR_ERR(phy->port_base);
+	}
+
+	phy->regmap = devm_regmap_init_mmio(phy->dev, phy->port_base,
+					    &mt7621_pci_phy_regmap_config);
+	if (IS_ERR(phy->regmap))
+		return PTR_ERR(phy->regmap);
+
+	phy->phy = devm_phy_create(dev, dev->of_node, &mt7621_pci_phy_ops);
+	if (IS_ERR(phy->phy)) {
+		dev_err(dev, "failed to create phy\n");
+		return PTR_ERR(phy->phy);
+	}
+
+	phy->sys_clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(phy->sys_clk)) {
+		dev_err(dev, "failed to get phy clock\n");
+		return PTR_ERR(phy->sys_clk);
+	}
+
+	phy_set_drvdata(phy->phy, phy);
+
+	provider = devm_of_phy_provider_register(dev, mt7621_pcie_phy_of_xlate);
+
+	return PTR_ERR_OR_ZERO(provider);
+}
+
+static const struct of_device_id mt7621_pci_phy_ids[] = {
+	{ .compatible = "mediatek,mt7621-pci-phy" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mt7621_pci_phy_ids);
+
+static struct platform_driver mt7621_pci_phy_driver = {
+	.probe = mt7621_pci_phy_probe,
+	.driver = {
+		.name = "mt7621-pci-phy",
+		.of_match_table = mt7621_pci_phy_ids,
+	},
+};
+
+builtin_platform_driver(mt7621_pci_phy_driver);
+
+MODULE_AUTHOR("Sergio Paracuellos <sergio.paracuellos@gmail.com>");
+MODULE_DESCRIPTION("MediaTek MT7621 PCIe PHY driver");
+MODULE_LICENSE("GPL v2");