Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

67 files changed, 23661 insertions, 0 deletions

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
new file mode 100644
index 000000000..60d13a949
--- /dev/null
+++ b/drivers/pwm/Kconfig
@@ -0,0 +1,678 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig PWM
+	bool "Pulse-Width Modulation (PWM) Support"
+	help
+	  Generic Pulse-Width Modulation (PWM) support.
+
+	  In Pulse-Width Modulation, a variation of the width of pulses
+	  in a rectangular pulse signal is used as a means to alter the
+	  average power of the signal. Applications include efficient
+	  power delivery and voltage regulation. In computer systems,
+	  PWMs are commonly used to control fans or the brightness of
+	  display backlights.
+
+	  This framework provides a generic interface to PWM devices
+	  within the Linux kernel. On the driver side it provides an API
+	  to register and unregister a PWM chip, an abstraction of a PWM
+	  controller, that supports one or more PWM devices. Client
+	  drivers can request PWM devices and use the generic framework
+	  to configure as well as enable and disable them.
+
+	  This generic framework replaces the legacy PWM framework which
+	  allows only a single driver implementing the required API. Not
+	  all legacy implementations have been ported to the framework
+	  yet. The framework provides an API that is backward compatible
+	  with the legacy framework so that existing client drivers
+	  continue to work as expected.
+
+	  If unsure, say no.
+
+if PWM
+
+config PWM_SYSFS
+	bool
+	default y if SYSFS
+
+config PWM_DEBUG
+	bool "PWM lowlevel drivers additional checks and debug messages"
+	depends on DEBUG_KERNEL
+	help
+	  This option enables some additional checks to help lowlevel driver
+	  authors to get their callbacks implemented correctly.
+	  It is expected to introduce some runtime overhead and diagnostic
+	  output to the kernel log, so only enable while working on a driver.
+
+config PWM_AB8500
+	tristate "AB8500 PWM support"
+	depends on AB8500_CORE && ARCH_U8500
+	help
+	  Generic PWM framework driver for Analog Baseband AB8500.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-ab8500.
+
+config PWM_ATMEL
+	tristate "Atmel PWM support"
+	depends on ARCH_AT91 || COMPILE_TEST
+	depends on HAS_IOMEM && OF
+	help
+	  Generic PWM framework driver for Atmel SoC.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-atmel.
+
+config PWM_ATMEL_HLCDC_PWM
+	tristate "Atmel HLCDC PWM support"
+	depends on MFD_ATMEL_HLCDC
+	depends on HAVE_CLK
+	help
+	  Generic PWM framework driver for the PWM output of the HLCDC
+	  (Atmel High-end LCD Controller). This PWM output is mainly used
+	  to control the LCD backlight.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-atmel-hlcdc.
+
+config PWM_ATMEL_TCB
+	tristate "Atmel TC Block PWM support"
+	depends on OF
+	select REGMAP_MMIO
+	help
+	  Generic PWM framework driver for Atmel Timer Counter Block.
+
+	  A Timer Counter Block provides 6 PWM devices grouped by 2.
+	  Devices in a given group must have the same period.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-atmel-tcb.
+
+config PWM_BCM_IPROC
+	tristate "iProc PWM support"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	depends on COMMON_CLK && HAS_IOMEM
+	default ARCH_BCM_IPROC
+	help
+	  Generic PWM framework driver for Broadcom iProc PWM block. This
+	  block is used in Broadcom iProc SoC's.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-bcm-iproc.
+
+config PWM_BCM_KONA
+	tristate "Kona PWM support"
+	depends on ARCH_BCM_MOBILE || ARCH_BCM_CYGNUS || COMPILE_TEST
+	depends on HAVE_CLK && HAS_IOMEM
+	default ARCH_BCM_MOBILE || ARCH_BCM_CYGNUS
+	help
+	  Generic PWM framework driver for Broadcom Kona PWM block.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-bcm-kona.
+
+config PWM_BCM2835
+	tristate "BCM2835 PWM support"
+	depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  PWM framework driver for BCM2835 controller (Raspberry Pi)
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-bcm2835.
+
+config PWM_BERLIN
+	tristate "Marvell Berlin PWM support"
+	depends on ARCH_BERLIN || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  PWM framework driver for Marvell Berlin SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-berlin.
+
+config PWM_BRCMSTB
+	tristate "Broadcom STB PWM support"
+	depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Generic PWM framework driver for the Broadcom Set-top-Box
+	  SoCs (BCM7xxx).
+
+	  To compile this driver as a module, choose M Here: the module
+	  will be called pwm-brcmstb.c.
+
+config PWM_CLK
+	tristate "Clock based PWM support"
+	depends on HAVE_CLK || COMPILE_TEST
+	help
+	  Generic PWM framework driver for outputs that can be
+	  muxed to clocks.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-clk.
+
+config PWM_CLPS711X
+	tristate "CLPS711X PWM support"
+	depends on ARCH_CLPS711X || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Generic PWM framework driver for Cirrus Logic CLPS711X.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-clps711x.
+
+config PWM_CRC
+	bool "Intel Crystalcove (CRC) PWM support"
+	depends on X86 && INTEL_SOC_PMIC
+	help
+	  Generic PWM framework driver for Crystalcove (CRC) PMIC based PWM
+	  control.
+
+config PWM_CROS_EC
+	tristate "ChromeOS EC PWM driver"
+	depends on CROS_EC
+	help
+	  PWM driver for exposing a PWM attached to the ChromeOS Embedded
+	  Controller.
+
+config PWM_DWC
+	tristate "DesignWare PWM Controller"
+	depends on PCI
+	help
+	  PWM driver for Synopsys DWC PWM Controller attached to a PCI bus.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-dwc.
+
+config PWM_EP93XX
+	tristate "Cirrus Logic EP93xx PWM support"
+	depends on ARCH_EP93XX || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Generic PWM framework driver for Cirrus Logic EP93xx.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-ep93xx.
+
+config PWM_FSL_FTM
+	tristate "Freescale FlexTimer Module (FTM) PWM support"
+	depends on HAS_IOMEM
+	depends on OF
+	select REGMAP_MMIO
+	help
+	  Generic FTM PWM framework driver for Freescale VF610 and
+	  Layerscape LS-1 SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-fsl-ftm.
+
+config PWM_HIBVT
+	tristate "HiSilicon BVT PWM support"
+	depends on ARCH_HISI || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Generic PWM framework driver for HiSilicon BVT SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-hibvt.
+
+config PWM_IMG
+	tristate "Imagination Technologies PWM driver"
+	depends on HAS_IOMEM
+	depends on MFD_SYSCON
+	depends on COMMON_CLK
+	depends on MIPS || COMPILE_TEST
+	help
+	  Generic PWM framework driver for Imagination Technologies
+	  PWM block which supports 4 channels.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-img
+
+config PWM_IMX1
+	tristate "i.MX1 PWM support"
+	depends on ARCH_MXC || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Generic PWM framework driver for i.MX1 and i.MX21
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-imx1.
+
+config PWM_IMX27
+	tristate "i.MX27 PWM support"
+	depends on ARCH_MXC || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Generic PWM framework driver for i.MX27 and later i.MX SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-imx27.
+
+config PWM_IMX_TPM
+	tristate "i.MX TPM PWM support"
+	depends on ARCH_MXC || COMPILE_TEST
+	depends on HAVE_CLK && HAS_IOMEM
+	help
+	  Generic PWM framework driver for i.MX7ULP TPM module, TPM's full
+	  name is Low Power Timer/Pulse Width Modulation Module.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-imx-tpm.
+
+config PWM_INTEL_LGM
+	tristate "Intel LGM PWM support"
+	depends on HAS_IOMEM
+	depends on (OF && X86) || COMPILE_TEST
+	select REGMAP_MMIO
+	help
+	  Generic PWM fan controller driver for LGM SoC.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-intel-lgm.
+
+config PWM_IQS620A
+	tristate "Azoteq IQS620A PWM support"
+	depends on MFD_IQS62X || COMPILE_TEST
+	help
+	  Generic PWM framework driver for the Azoteq IQS620A multi-function
+	  sensor.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called pwm-iqs620a.
+
+config PWM_JZ4740
+	tristate "Ingenic JZ47xx PWM support"
+	depends on MIPS || COMPILE_TEST
+	depends on COMMON_CLK
+	select MFD_SYSCON
+	help
+	  Generic PWM framework driver for Ingenic JZ47xx based
+	  machines.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-jz4740.
+
+config PWM_KEEMBAY
+	tristate "Intel Keem Bay PWM driver"
+	depends on ARCH_KEEMBAY || COMPILE_TEST
+	depends on COMMON_CLK && HAS_IOMEM
+	help
+	  The platform driver for Intel Keem Bay PWM controller.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-keembay.
+
+config PWM_LP3943
+	tristate "TI/National Semiconductor LP3943 PWM support"
+	depends on MFD_LP3943
+	help
+	  Generic PWM framework driver for LP3943 which supports two PWM
+	  channels.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-lp3943.
+
+config PWM_LPC18XX_SCT
+	tristate "LPC18xx/43xx PWM/SCT support"
+	depends on ARCH_LPC18XX || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Generic PWM framework driver for NXP LPC18xx PWM/SCT which
+	  supports 16 channels.
+	  A maximum of 15 channels can be requested simultaneously and
+	  must have the same period.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-lpc18xx-sct.
+
+config PWM_LPC32XX
+	tristate "LPC32XX PWM support"
+	depends on ARCH_LPC32XX || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Generic PWM framework driver for LPC32XX. The LPC32XX SOC has two
+	  PWM controllers.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-lpc32xx.
+
+config PWM_LPSS
+	depends on HAS_IOMEM
+	tristate
+
+config PWM_LPSS_PCI
+	tristate "Intel LPSS PWM PCI driver"
+	depends on X86 || COMPILE_TEST
+	depends on HAS_IOMEM && PCI
+	select PWM_LPSS
+	help
+	  The PCI driver for Intel Low Power Subsystem PWM controller.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-lpss-pci.
+
+config PWM_LPSS_PLATFORM
+	tristate "Intel LPSS PWM platform driver"
+	depends on (X86 && ACPI) || COMPILE_TEST
+	depends on HAS_IOMEM
+	select PWM_LPSS
+	help
+	  The platform driver for Intel Low Power Subsystem PWM controller.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-lpss-platform.
+
+config PWM_MESON
+	tristate "Amlogic Meson PWM driver"
+	depends on ARCH_MESON || COMPILE_TEST
+	depends on COMMON_CLK && HAS_IOMEM
+	help
+	  The platform driver for Amlogic Meson PWM controller.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-meson.
+
+config PWM_MTK_DISP
+	tristate "MediaTek display PWM driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Generic PWM framework driver for MediaTek disp-pwm device.
+	  The PWM is used to control the backlight brightness for display.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-mtk-disp.
+
+config PWM_MEDIATEK
+	tristate "MediaTek PWM support"
+	depends on ARCH_MEDIATEK || RALINK || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Generic PWM framework driver for Mediatek ARM SoC.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-mediatek.
+
+config PWM_MXS
+	tristate "Freescale MXS PWM support"
+	depends on ARCH_MXS || COMPILE_TEST
+	depends on HAS_IOMEM && OF
+	select STMP_DEVICE
+	help
+	  Generic PWM framework driver for Freescale MXS.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-mxs.
+
+config PWM_NTXEC
+	tristate "Netronix embedded controller PWM support"
+	depends on MFD_NTXEC
+	help
+	  Say yes here if you want to support the PWM output of the embedded
+	  controller found in certain e-book readers designed by the original
+	  design manufacturer Netronix.
+
+config PWM_OMAP_DMTIMER
+	tristate "OMAP Dual-Mode Timer PWM support"
+	depends on OF
+	depends on OMAP_DM_TIMER || COMPILE_TEST
+	help
+	  Generic PWM framework driver for OMAP Dual-Mode Timer PWM output
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-omap-dmtimer
+
+config PWM_PCA9685
+	tristate "NXP PCA9685 PWM driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Generic PWM framework driver for NXP PCA9685 LED controller.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-pca9685.
+
+config PWM_PXA
+	tristate "PXA PWM support"
+	depends on ARCH_PXA || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Generic PWM framework driver for PXA.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-pxa.
+
+config PWM_RASPBERRYPI_POE
+	tristate "Raspberry Pi Firwmware PoE Hat PWM support"
+	# Make sure not 'y' when RASPBERRYPI_FIRMWARE is 'm'. This can only
+	# happen when COMPILE_TEST=y, hence the added !RASPBERRYPI_FIRMWARE.
+	depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE)
+	help
+	  Enable Raspberry Pi firmware controller PWM bus used to control the
+	  official RPI PoE hat
+
+config PWM_RCAR
+	tristate "Renesas R-Car PWM support"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This driver exposes the PWM Timer controller found in Renesas
+	  R-Car chips through the PWM API.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-rcar.
+
+config PWM_RENESAS_TPU
+	tristate "Renesas TPU PWM support"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This driver exposes the Timer Pulse Unit (TPU) PWM controller found
+	  in Renesas chips through the PWM API.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-renesas-tpu.
+
+config PWM_ROCKCHIP
+	tristate "Rockchip PWM support"
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Generic PWM framework driver for the PWM controller found on
+	  Rockchip SoCs.
+
+config PWM_SAMSUNG
+	tristate "Samsung PWM support"
+	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Generic PWM framework driver for Samsung S3C24xx, S3C64xx, S5Pv210
+	  and Exynos SoCs.
+	  Choose Y here only if you build for such Samsung SoC.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-samsung.
+
+config PWM_SIFIVE
+	tristate "SiFive PWM support"
+	depends on OF
+	depends on COMMON_CLK && HAS_IOMEM
+	depends on RISCV || COMPILE_TEST
+	help
+	  Generic PWM framework driver for SiFive SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-sifive.
+
+config PWM_SL28CPLD
+	tristate "Kontron sl28cpld PWM support"
+	depends on MFD_SL28CPLD || COMPILE_TEST
+	help
+	  Generic PWM framework driver for board management controller
+	  found on the Kontron sl28 CPLD.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-sl28cpld.
+
+config PWM_SPEAR
+	tristate "STMicroelectronics SPEAr PWM support"
+	depends on PLAT_SPEAR || COMPILE_TEST
+	depends on HAS_IOMEM && OF
+	help
+	  Generic PWM framework driver for the PWM controller on ST
+	  SPEAr SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-spear.
+
+config PWM_SPRD
+	tristate "Spreadtrum PWM support"
+	depends on ARCH_SPRD || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Generic PWM framework driver for the PWM controller on
+	  Spreadtrum SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-sprd.
+
+config PWM_STI
+	tristate "STiH4xx PWM support"
+	depends on ARCH_STI || COMPILE_TEST
+	depends on HAS_IOMEM && OF
+	help
+	  Generic PWM framework driver for STiH4xx SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-sti.
+
+config PWM_STM32
+	tristate "STMicroelectronics STM32 PWM"
+	depends on MFD_STM32_TIMERS || COMPILE_TEST
+	help
+	  Generic PWM framework driver for STM32 SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-stm32.
+
+config PWM_STM32_LP
+	tristate "STMicroelectronics STM32 PWM LP"
+	depends on MFD_STM32_LPTIMER || COMPILE_TEST
+	help
+	  Generic PWM framework driver for STMicroelectronics STM32 SoCs
+	  with Low-Power Timer (LPTIM).
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-stm32-lp.
+
+config PWM_STMPE
+	bool "STMPE expander PWM export"
+	depends on MFD_STMPE
+	help
+	  This enables support for the PWMs found in the STMPE I/O
+	  expanders.
+
+config PWM_SUN4I
+	tristate "Allwinner PWM support"
+	depends on ARCH_SUNXI || COMPILE_TEST
+	depends on HAS_IOMEM && COMMON_CLK
+	help
+	  Generic PWM framework driver for Allwinner SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-sun4i.
+
+config PWM_SUNPLUS
+	tristate "Sunplus PWM support"
+	depends on ARCH_SUNPLUS || COMPILE_TEST
+	depends on HAS_IOMEM && OF
+	help
+	  Generic PWM framework driver for the PWM controller on
+	  Sunplus SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-sunplus.
+
+config PWM_TEGRA
+	tristate "NVIDIA Tegra PWM support"
+	depends on ARCH_TEGRA || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Generic PWM framework driver for the PWFM controller found on NVIDIA
+	  Tegra SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-tegra.
+
+config PWM_TIECAP
+	tristate "ECAP PWM support"
+	depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  PWM driver support for the ECAP APWM controller found on TI SOCs
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-tiecap.
+
+config PWM_TIEHRPWM
+	tristate "EHRPWM PWM support"
+	depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_K3 || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  PWM driver support for the EHRPWM controller found on TI SOCs
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-tiehrpwm.
+
+config PWM_TWL
+	tristate "TWL4030/6030 PWM support"
+	depends on TWL4030_CORE
+	help
+	  Generic PWM framework driver for TWL4030/6030.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-twl.
+
+config PWM_TWL_LED
+	tristate "TWL4030/6030 PWM support for LED drivers"
+	depends on TWL4030_CORE
+	help
+	  Generic PWM framework driver for TWL4030/6030 LED terminals.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-twl-led.
+
+config PWM_VISCONTI
+	tristate "Toshiba Visconti PWM support"
+	depends on ARCH_VISCONTI || COMPILE_TEST
+	help
+	  PWM Subsystem driver support for Toshiba Visconti SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-visconti.
+
+config PWM_VT8500
+	tristate "vt8500 PWM support"
+	depends on ARCH_VT8500 || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Generic PWM framework driver for vt8500.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-vt8500.
+
+config PWM_XILINX
+	tristate "Xilinx AXI Timer PWM support"
+	depends on OF_ADDRESS
+	depends on COMMON_CLK
+	select REGMAP_MMIO
+	help
+	  PWM driver for Xilinx LogiCORE IP AXI timers. This timer is
+	  typically a soft core which may be present in Xilinx FPGAs.
+	  This device may also be present in Microblaze soft processors.
+	  If you don't have this IP in your design, choose N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-xilinx.
+
+endif
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
new file mode 100644
index 000000000..7bf1a29f0
--- /dev/null
+++ b/drivers/pwm/Makefile
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PWM)		+= core.o
+obj-$(CONFIG_PWM_SYSFS)		+= sysfs.o
+obj-$(CONFIG_PWM_AB8500)	+= pwm-ab8500.o
+obj-$(CONFIG_PWM_ATMEL)		+= pwm-atmel.o
+obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM)	+= pwm-atmel-hlcdc.o
+obj-$(CONFIG_PWM_ATMEL_TCB)	+= pwm-atmel-tcb.o
+obj-$(CONFIG_PWM_BCM_IPROC)	+= pwm-bcm-iproc.o
+obj-$(CONFIG_PWM_BCM_KONA)	+= pwm-bcm-kona.o
+obj-$(CONFIG_PWM_BCM2835)	+= pwm-bcm2835.o
+obj-$(CONFIG_PWM_BERLIN)	+= pwm-berlin.o
+obj-$(CONFIG_PWM_BRCMSTB)	+= pwm-brcmstb.o
+obj-$(CONFIG_PWM_CLK)		+= pwm-clk.o
+obj-$(CONFIG_PWM_CLPS711X)	+= pwm-clps711x.o
+obj-$(CONFIG_PWM_CRC)		+= pwm-crc.o
+obj-$(CONFIG_PWM_CROS_EC)	+= pwm-cros-ec.o
+obj-$(CONFIG_PWM_DWC)		+= pwm-dwc.o
+obj-$(CONFIG_PWM_EP93XX)	+= pwm-ep93xx.o
+obj-$(CONFIG_PWM_FSL_FTM)	+= pwm-fsl-ftm.o
+obj-$(CONFIG_PWM_HIBVT)		+= pwm-hibvt.o
+obj-$(CONFIG_PWM_IMG)		+= pwm-img.o
+obj-$(CONFIG_PWM_IMX1)		+= pwm-imx1.o
+obj-$(CONFIG_PWM_IMX27)		+= pwm-imx27.o
+obj-$(CONFIG_PWM_IMX_TPM)	+= pwm-imx-tpm.o
+obj-$(CONFIG_PWM_INTEL_LGM)	+= pwm-intel-lgm.o
+obj-$(CONFIG_PWM_IQS620A)	+= pwm-iqs620a.o
+obj-$(CONFIG_PWM_JZ4740)	+= pwm-jz4740.o
+obj-$(CONFIG_PWM_KEEMBAY)	+= pwm-keembay.o
+obj-$(CONFIG_PWM_LP3943)	+= pwm-lp3943.o
+obj-$(CONFIG_PWM_LPC18XX_SCT)	+= pwm-lpc18xx-sct.o
+obj-$(CONFIG_PWM_LPC32XX)	+= pwm-lpc32xx.o
+obj-$(CONFIG_PWM_LPSS)		+= pwm-lpss.o
+obj-$(CONFIG_PWM_LPSS_PCI)	+= pwm-lpss-pci.o
+obj-$(CONFIG_PWM_LPSS_PLATFORM)	+= pwm-lpss-platform.o
+obj-$(CONFIG_PWM_MESON)		+= pwm-meson.o
+obj-$(CONFIG_PWM_MEDIATEK)	+= pwm-mediatek.o
+obj-$(CONFIG_PWM_MTK_DISP)	+= pwm-mtk-disp.o
+obj-$(CONFIG_PWM_MXS)		+= pwm-mxs.o
+obj-$(CONFIG_PWM_NTXEC)		+= pwm-ntxec.o
+obj-$(CONFIG_PWM_OMAP_DMTIMER)	+= pwm-omap-dmtimer.o
+obj-$(CONFIG_PWM_PCA9685)	+= pwm-pca9685.o
+obj-$(CONFIG_PWM_PXA)		+= pwm-pxa.o
+obj-$(CONFIG_PWM_RASPBERRYPI_POE)	+= pwm-raspberrypi-poe.o
+obj-$(CONFIG_PWM_RCAR)		+= pwm-rcar.o
+obj-$(CONFIG_PWM_RENESAS_TPU)	+= pwm-renesas-tpu.o
+obj-$(CONFIG_PWM_ROCKCHIP)	+= pwm-rockchip.o
+obj-$(CONFIG_PWM_SAMSUNG)	+= pwm-samsung.o
+obj-$(CONFIG_PWM_SIFIVE)	+= pwm-sifive.o
+obj-$(CONFIG_PWM_SL28CPLD)	+= pwm-sl28cpld.o
+obj-$(CONFIG_PWM_SPEAR)		+= pwm-spear.o
+obj-$(CONFIG_PWM_SPRD)		+= pwm-sprd.o
+obj-$(CONFIG_PWM_STI)		+= pwm-sti.o
+obj-$(CONFIG_PWM_STM32)		+= pwm-stm32.o
+obj-$(CONFIG_PWM_STM32_LP)	+= pwm-stm32-lp.o
+obj-$(CONFIG_PWM_STMPE)		+= pwm-stmpe.o
+obj-$(CONFIG_PWM_SUN4I)		+= pwm-sun4i.o
+obj-$(CONFIG_PWM_SUNPLUS)	+= pwm-sunplus.o
+obj-$(CONFIG_PWM_TEGRA)		+= pwm-tegra.o
+obj-$(CONFIG_PWM_TIECAP)	+= pwm-tiecap.o
+obj-$(CONFIG_PWM_TIEHRPWM)	+= pwm-tiehrpwm.o
+obj-$(CONFIG_PWM_TWL)		+= pwm-twl.o
+obj-$(CONFIG_PWM_TWL_LED)	+= pwm-twl-led.o
+obj-$(CONFIG_PWM_VISCONTI)	+= pwm-visconti.o
+obj-$(CONFIG_PWM_VT8500)	+= pwm-vt8500.o
+obj-$(CONFIG_PWM_XILINX)	+= pwm-xilinx.o
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
new file mode 100644
index 000000000..9726f96bf
--- /dev/null
+++ b/drivers/pwm/core.c
@@ -0,0 +1,1188 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Generic pwmlib implementation
+ *
+ * Copyright (C) 2011 Sascha Hauer <s.hauer@pengutronix.de>
+ * Copyright (C) 2011-2012 Avionic Design GmbH
+ */
+
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/pwm.h>
+#include <linux/radix-tree.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#include <dt-bindings/pwm/pwm.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/pwm.h>
+
+#define MAX_PWMS 1024
+
+static DEFINE_MUTEX(pwm_lookup_lock);
+static LIST_HEAD(pwm_lookup_list);
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_chips);
+static DECLARE_BITMAP(allocated_pwms, MAX_PWMS);
+static RADIX_TREE(pwm_tree, GFP_KERNEL);
+
+static struct pwm_device *pwm_to_device(unsigned int pwm)
+{
+	return radix_tree_lookup(&pwm_tree, pwm);
+}
+
+static int alloc_pwms(unsigned int count)
+{
+	unsigned int start;
+
+	start = bitmap_find_next_zero_area(allocated_pwms, MAX_PWMS, 0,
+					   count, 0);
+
+	if (start + count > MAX_PWMS)
+		return -ENOSPC;
+
+	return start;
+}
+
+static void free_pwms(struct pwm_chip *chip)
+{
+	unsigned int i;
+
+	for (i = 0; i < chip->npwm; i++) {
+		struct pwm_device *pwm = &chip->pwms[i];
+
+		radix_tree_delete(&pwm_tree, pwm->pwm);
+	}
+
+	bitmap_clear(allocated_pwms, chip->base, chip->npwm);
+
+	kfree(chip->pwms);
+	chip->pwms = NULL;
+}
+
+static struct pwm_chip *pwmchip_find_by_name(const char *name)
+{
+	struct pwm_chip *chip;
+
+	if (!name)
+		return NULL;
+
+	mutex_lock(&pwm_lock);
+
+	list_for_each_entry(chip, &pwm_chips, list) {
+		const char *chip_name = dev_name(chip->dev);
+
+		if (chip_name && strcmp(chip_name, name) == 0) {
+			mutex_unlock(&pwm_lock);
+			return chip;
+		}
+	}
+
+	mutex_unlock(&pwm_lock);
+
+	return NULL;
+}
+
+static int pwm_device_request(struct pwm_device *pwm, const char *label)
+{
+	int err;
+
+	if (test_bit(PWMF_REQUESTED, &pwm->flags))
+		return -EBUSY;
+
+	if (!try_module_get(pwm->chip->ops->owner))
+		return -ENODEV;
+
+	if (pwm->chip->ops->request) {
+		err = pwm->chip->ops->request(pwm->chip, pwm);
+		if (err) {
+			module_put(pwm->chip->ops->owner);
+			return err;
+		}
+	}
+
+	if (pwm->chip->ops->get_state) {
+		pwm->chip->ops->get_state(pwm->chip, pwm, &pwm->state);
+		trace_pwm_get(pwm, &pwm->state);
+
+		if (IS_ENABLED(CONFIG_PWM_DEBUG))
+			pwm->last = pwm->state;
+	}
+
+	set_bit(PWMF_REQUESTED, &pwm->flags);
+	pwm->label = label;
+
+	return 0;
+}
+
+struct pwm_device *
+of_pwm_xlate_with_flags(struct pwm_chip *pc, const struct of_phandle_args *args)
+{
+	struct pwm_device *pwm;
+
+	if (pc->of_pwm_n_cells < 2)
+		return ERR_PTR(-EINVAL);
+
+	/* flags in the third cell are optional */
+	if (args->args_count < 2)
+		return ERR_PTR(-EINVAL);
+
+	if (args->args[0] >= pc->npwm)
+		return ERR_PTR(-EINVAL);
+
+	pwm = pwm_request_from_chip(pc, args->args[0], NULL);
+	if (IS_ERR(pwm))
+		return pwm;
+
+	pwm->args.period = args->args[1];
+	pwm->args.polarity = PWM_POLARITY_NORMAL;
+
+	if (pc->of_pwm_n_cells >= 3) {
+		if (args->args_count > 2 && args->args[2] & PWM_POLARITY_INVERTED)
+			pwm->args.polarity = PWM_POLARITY_INVERSED;
+	}
+
+	return pwm;
+}
+EXPORT_SYMBOL_GPL(of_pwm_xlate_with_flags);
+
+struct pwm_device *
+of_pwm_single_xlate(struct pwm_chip *pc, const struct of_phandle_args *args)
+{
+	struct pwm_device *pwm;
+
+	if (pc->of_pwm_n_cells < 1)
+		return ERR_PTR(-EINVAL);
+
+	/* validate that one cell is specified, optionally with flags */
+	if (args->args_count != 1 && args->args_count != 2)
+		return ERR_PTR(-EINVAL);
+
+	pwm = pwm_request_from_chip(pc, 0, NULL);
+	if (IS_ERR(pwm))
+		return pwm;
+
+	pwm->args.period = args->args[0];
+	pwm->args.polarity = PWM_POLARITY_NORMAL;
+
+	if (args->args_count == 2 && args->args[1] & PWM_POLARITY_INVERTED)
+		pwm->args.polarity = PWM_POLARITY_INVERSED;
+
+	return pwm;
+}
+EXPORT_SYMBOL_GPL(of_pwm_single_xlate);
+
+static void of_pwmchip_add(struct pwm_chip *chip)
+{
+	if (!chip->dev || !chip->dev->of_node)
+		return;
+
+	if (!chip->of_xlate) {
+		u32 pwm_cells;
+
+		if (of_property_read_u32(chip->dev->of_node, "#pwm-cells",
+					 &pwm_cells))
+			pwm_cells = 2;
+
+		chip->of_xlate = of_pwm_xlate_with_flags;
+		chip->of_pwm_n_cells = pwm_cells;
+	}
+
+	of_node_get(chip->dev->of_node);
+}
+
+static void of_pwmchip_remove(struct pwm_chip *chip)
+{
+	if (chip->dev)
+		of_node_put(chip->dev->of_node);
+}
+
+/**
+ * pwm_set_chip_data() - set private chip data for a PWM
+ * @pwm: PWM device
+ * @data: pointer to chip-specific data
+ *
+ * Returns: 0 on success or a negative error code on failure.
+ */
+int pwm_set_chip_data(struct pwm_device *pwm, void *data)
+{
+	if (!pwm)
+		return -EINVAL;
+
+	pwm->chip_data = data;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pwm_set_chip_data);
+
+/**
+ * pwm_get_chip_data() - get private chip data for a PWM
+ * @pwm: PWM device
+ *
+ * Returns: A pointer to the chip-private data for the PWM device.
+ */
+void *pwm_get_chip_data(struct pwm_device *pwm)
+{
+	return pwm ? pwm->chip_data : NULL;
+}
+EXPORT_SYMBOL_GPL(pwm_get_chip_data);
+
+static bool pwm_ops_check(const struct pwm_chip *chip)
+{
+	const struct pwm_ops *ops = chip->ops;
+
+	if (!ops->apply)
+		return false;
+
+	if (IS_ENABLED(CONFIG_PWM_DEBUG) && !ops->get_state)
+		dev_warn(chip->dev,
+			 "Please implement the .get_state() callback\n");
+
+	return true;
+}
+
+/**
+ * pwmchip_add() - register a new PWM chip
+ * @chip: the PWM chip to add
+ *
+ * Register a new PWM chip.
+ *
+ * Returns: 0 on success or a negative error code on failure.
+ */
+int pwmchip_add(struct pwm_chip *chip)
+{
+	struct pwm_device *pwm;
+	unsigned int i;
+	int ret;
+
+	if (!chip || !chip->dev || !chip->ops || !chip->npwm)
+		return -EINVAL;
+
+	if (!pwm_ops_check(chip))
+		return -EINVAL;
+
+	mutex_lock(&pwm_lock);
+
+	ret = alloc_pwms(chip->npwm);
+	if (ret < 0)
+		goto out;
+
+	chip->base = ret;
+
+	chip->pwms = kcalloc(chip->npwm, sizeof(*pwm), GFP_KERNEL);
+	if (!chip->pwms) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	for (i = 0; i < chip->npwm; i++) {
+		pwm = &chip->pwms[i];
+
+		pwm->chip = chip;
+		pwm->pwm = chip->base + i;
+		pwm->hwpwm = i;
+
+		radix_tree_insert(&pwm_tree, pwm->pwm, pwm);
+	}
+
+	bitmap_set(allocated_pwms, chip->base, chip->npwm);
+
+	INIT_LIST_HEAD(&chip->list);
+	list_add(&chip->list, &pwm_chips);
+
+	ret = 0;
+
+	if (IS_ENABLED(CONFIG_OF))
+		of_pwmchip_add(chip);
+
+out:
+	mutex_unlock(&pwm_lock);
+
+	if (!ret)
+		pwmchip_sysfs_export(chip);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pwmchip_add);
+
+/**
+ * pwmchip_remove() - remove a PWM chip
+ * @chip: the PWM chip to remove
+ *
+ * Removes a PWM chip. This function may return busy if the PWM chip provides
+ * a PWM device that is still requested.
+ *
+ * Returns: 0 on success or a negative error code on failure.
+ */
+void pwmchip_remove(struct pwm_chip *chip)
+{
+	pwmchip_sysfs_unexport(chip);
+
+	mutex_lock(&pwm_lock);
+
+	list_del_init(&chip->list);
+
+	if (IS_ENABLED(CONFIG_OF))
+		of_pwmchip_remove(chip);
+
+	free_pwms(chip);
+
+	mutex_unlock(&pwm_lock);
+}
+EXPORT_SYMBOL_GPL(pwmchip_remove);
+
+static void devm_pwmchip_remove(void *data)
+{
+	struct pwm_chip *chip = data;
+
+	pwmchip_remove(chip);
+}
+
+int devm_pwmchip_add(struct device *dev, struct pwm_chip *chip)
+{
+	int ret;
+
+	ret = pwmchip_add(chip);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev, devm_pwmchip_remove, chip);
+}
+EXPORT_SYMBOL_GPL(devm_pwmchip_add);
+
+/**
+ * pwm_request() - request a PWM device
+ * @pwm: global PWM device index
+ * @label: PWM device label
+ *
+ * This function is deprecated, use pwm_get() instead.
+ *
+ * Returns: A pointer to a PWM device or an ERR_PTR()-encoded error code on
+ * failure.
+ */
+struct pwm_device *pwm_request(int pwm, const char *label)
+{
+	struct pwm_device *dev;
+	int err;
+
+	if (pwm < 0 || pwm >= MAX_PWMS)
+		return ERR_PTR(-EINVAL);
+
+	mutex_lock(&pwm_lock);
+
+	dev = pwm_to_device(pwm);
+	if (!dev) {
+		dev = ERR_PTR(-EPROBE_DEFER);
+		goto out;
+	}
+
+	err = pwm_device_request(dev, label);
+	if (err < 0)
+		dev = ERR_PTR(err);
+
+out:
+	mutex_unlock(&pwm_lock);
+
+	return dev;
+}
+EXPORT_SYMBOL_GPL(pwm_request);
+
+/**
+ * pwm_request_from_chip() - request a PWM device relative to a PWM chip
+ * @chip: PWM chip
+ * @index: per-chip index of the PWM to request
+ * @label: a literal description string of this PWM
+ *
+ * Returns: A pointer to the PWM device at the given index of the given PWM
+ * chip. A negative error code is returned if the index is not valid for the
+ * specified PWM chip or if the PWM device cannot be requested.
+ */
+struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip,
+					 unsigned int index,
+					 const char *label)
+{
+	struct pwm_device *pwm;
+	int err;
+
+	if (!chip || index >= chip->npwm)
+		return ERR_PTR(-EINVAL);
+
+	mutex_lock(&pwm_lock);
+	pwm = &chip->pwms[index];
+
+	err = pwm_device_request(pwm, label);
+	if (err < 0)
+		pwm = ERR_PTR(err);
+
+	mutex_unlock(&pwm_lock);
+	return pwm;
+}
+EXPORT_SYMBOL_GPL(pwm_request_from_chip);
+
+/**
+ * pwm_free() - free a PWM device
+ * @pwm: PWM device
+ *
+ * This function is deprecated, use pwm_put() instead.
+ */
+void pwm_free(struct pwm_device *pwm)
+{
+	pwm_put(pwm);
+}
+EXPORT_SYMBOL_GPL(pwm_free);
+
+static void pwm_apply_state_debug(struct pwm_device *pwm,
+				  const struct pwm_state *state)
+{
+	struct pwm_state *last = &pwm->last;
+	struct pwm_chip *chip = pwm->chip;
+	struct pwm_state s1, s2;
+	int err;
+
+	if (!IS_ENABLED(CONFIG_PWM_DEBUG))
+		return;
+
+	/* No reasonable diagnosis possible without .get_state() */
+	if (!chip->ops->get_state)
+		return;
+
+	/*
+	 * *state was just applied. Read out the hardware state and do some
+	 * checks.
+	 */
+
+	chip->ops->get_state(chip, pwm, &s1);
+	trace_pwm_get(pwm, &s1);
+
+	/*
+	 * The lowlevel driver either ignored .polarity (which is a bug) or as
+	 * best effort inverted .polarity and fixed .duty_cycle respectively.
+	 * Undo this inversion and fixup for further tests.
+	 */
+	if (s1.enabled && s1.polarity != state->polarity) {
+		s2.polarity = state->polarity;
+		s2.duty_cycle = s1.period - s1.duty_cycle;
+		s2.period = s1.period;
+		s2.enabled = s1.enabled;
+	} else {
+		s2 = s1;
+	}
+
+	if (s2.polarity != state->polarity &&
+	    state->duty_cycle < state->period)
+		dev_warn(chip->dev, ".apply ignored .polarity\n");
+
+	if (state->enabled &&
+	    last->polarity == state->polarity &&
+	    last->period > s2.period &&
+	    last->period <= state->period)
+		dev_warn(chip->dev,
+			 ".apply didn't pick the best available period (requested: %llu, applied: %llu, possible: %llu)\n",
+			 state->period, s2.period, last->period);
+
+	if (state->enabled && state->period < s2.period)
+		dev_warn(chip->dev,
+			 ".apply is supposed to round down period (requested: %llu, applied: %llu)\n",
+			 state->period, s2.period);
+
+	if (state->enabled &&
+	    last->polarity == state->polarity &&
+	    last->period == s2.period &&
+	    last->duty_cycle > s2.duty_cycle &&
+	    last->duty_cycle <= state->duty_cycle)
+		dev_warn(chip->dev,
+			 ".apply didn't pick the best available duty cycle (requested: %llu/%llu, applied: %llu/%llu, possible: %llu/%llu)\n",
+			 state->duty_cycle, state->period,
+			 s2.duty_cycle, s2.period,
+			 last->duty_cycle, last->period);
+
+	if (state->enabled && state->duty_cycle < s2.duty_cycle)
+		dev_warn(chip->dev,
+			 ".apply is supposed to round down duty_cycle (requested: %llu/%llu, applied: %llu/%llu)\n",
+			 state->duty_cycle, state->period,
+			 s2.duty_cycle, s2.period);
+
+	if (!state->enabled && s2.enabled && s2.duty_cycle > 0)
+		dev_warn(chip->dev,
+			 "requested disabled, but yielded enabled with duty > 0\n");
+
+	/* reapply the state that the driver reported being configured. */
+	err = chip->ops->apply(chip, pwm, &s1);
+	if (err) {
+		*last = s1;
+		dev_err(chip->dev, "failed to reapply current setting\n");
+		return;
+	}
+
+	trace_pwm_apply(pwm, &s1);
+
+	chip->ops->get_state(chip, pwm, last);
+	trace_pwm_get(pwm, last);
+
+	/* reapplication of the current state should give an exact match */
+	if (s1.enabled != last->enabled ||
+	    s1.polarity != last->polarity ||
+	    (s1.enabled && s1.period != last->period) ||
+	    (s1.enabled && s1.duty_cycle != last->duty_cycle)) {
+		dev_err(chip->dev,
+			".apply is not idempotent (ena=%d pol=%d %llu/%llu) -> (ena=%d pol=%d %llu/%llu)\n",
+			s1.enabled, s1.polarity, s1.duty_cycle, s1.period,
+			last->enabled, last->polarity, last->duty_cycle,
+			last->period);
+	}
+}
+
+/**
+ * pwm_apply_state() - atomically apply a new state to a PWM device
+ * @pwm: PWM device
+ * @state: new state to apply
+ */
+int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state)
+{
+	struct pwm_chip *chip;
+	int err;
+
+	/*
+	 * Some lowlevel driver's implementations of .apply() make use of
+	 * mutexes, also with some drivers only returning when the new
+	 * configuration is active calling pwm_apply_state() from atomic context
+	 * is a bad idea. So make it explicit that calling this function might
+	 * sleep.
+	 */
+	might_sleep();
+
+	if (!pwm || !state || !state->period ||
+	    state->duty_cycle > state->period)
+		return -EINVAL;
+
+	chip = pwm->chip;
+
+	if (state->period == pwm->state.period &&
+	    state->duty_cycle == pwm->state.duty_cycle &&
+	    state->polarity == pwm->state.polarity &&
+	    state->enabled == pwm->state.enabled &&
+	    state->usage_power == pwm->state.usage_power)
+		return 0;
+
+	err = chip->ops->apply(chip, pwm, state);
+	if (err)
+		return err;
+
+	trace_pwm_apply(pwm, state);
+
+	pwm->state = *state;
+
+	/*
+	 * only do this after pwm->state was applied as some
+	 * implementations of .get_state depend on this
+	 */
+	pwm_apply_state_debug(pwm, state);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pwm_apply_state);
+
+/**
+ * pwm_capture() - capture and report a PWM signal
+ * @pwm: PWM device
+ * @result: structure to fill with capture result
+ * @timeout: time to wait, in milliseconds, before giving up on capture
+ *
+ * Returns: 0 on success or a negative error code on failure.
+ */
+int pwm_capture(struct pwm_device *pwm, struct pwm_capture *result,
+		unsigned long timeout)
+{
+	int err;
+
+	if (!pwm || !pwm->chip->ops)
+		return -EINVAL;
+
+	if (!pwm->chip->ops->capture)
+		return -ENOSYS;
+
+	mutex_lock(&pwm_lock);
+	err = pwm->chip->ops->capture(pwm->chip, pwm, result, timeout);
+	mutex_unlock(&pwm_lock);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(pwm_capture);
+
+/**
+ * pwm_adjust_config() - adjust the current PWM config to the PWM arguments
+ * @pwm: PWM device
+ *
+ * This function will adjust the PWM config to the PWM arguments provided
+ * by the DT or PWM lookup table. This is particularly useful to adapt
+ * the bootloader config to the Linux one.
+ */
+int pwm_adjust_config(struct pwm_device *pwm)
+{
+	struct pwm_state state;
+	struct pwm_args pargs;
+
+	pwm_get_args(pwm, &pargs);
+	pwm_get_state(pwm, &state);
+
+	/*
+	 * If the current period is zero it means that either the PWM driver
+	 * does not support initial state retrieval or the PWM has not yet
+	 * been configured.
+	 *
+	 * In either case, we setup the new period and polarity, and assign a
+	 * duty cycle of 0.
+	 */
+	if (!state.period) {
+		state.duty_cycle = 0;
+		state.period = pargs.period;
+		state.polarity = pargs.polarity;
+
+		return pwm_apply_state(pwm, &state);
+	}
+
+	/*
+	 * Adjust the PWM duty cycle/period based on the period value provided
+	 * in PWM args.
+	 */
+	if (pargs.period != state.period) {
+		u64 dutycycle = (u64)state.duty_cycle * pargs.period;
+
+		do_div(dutycycle, state.period);
+		state.duty_cycle = dutycycle;
+		state.period = pargs.period;
+	}
+
+	/*
+	 * If the polarity changed, we should also change the duty cycle.
+	 */
+	if (pargs.polarity != state.polarity) {
+		state.polarity = pargs.polarity;
+		state.duty_cycle = state.period - state.duty_cycle;
+	}
+
+	return pwm_apply_state(pwm, &state);
+}
+EXPORT_SYMBOL_GPL(pwm_adjust_config);
+
+static struct pwm_chip *fwnode_to_pwmchip(struct fwnode_handle *fwnode)
+{
+	struct pwm_chip *chip;
+
+	mutex_lock(&pwm_lock);
+
+	list_for_each_entry(chip, &pwm_chips, list)
+		if (chip->dev && device_match_fwnode(chip->dev, fwnode)) {
+			mutex_unlock(&pwm_lock);
+			return chip;
+		}
+
+	mutex_unlock(&pwm_lock);
+
+	return ERR_PTR(-EPROBE_DEFER);
+}
+
+static struct device_link *pwm_device_link_add(struct device *dev,
+					       struct pwm_device *pwm)
+{
+	struct device_link *dl;
+
+	if (!dev) {
+		/*
+		 * No device for the PWM consumer has been provided. It may
+		 * impact the PM sequence ordering: the PWM supplier may get
+		 * suspended before the consumer.
+		 */
+		dev_warn(pwm->chip->dev,
+			 "No consumer device specified to create a link to\n");
+		return NULL;
+	}
+
+	dl = device_link_add(dev, pwm->chip->dev, DL_FLAG_AUTOREMOVE_CONSUMER);
+	if (!dl) {
+		dev_err(dev, "failed to create device link to %s\n",
+			dev_name(pwm->chip->dev));
+		return ERR_PTR(-EINVAL);
+	}
+
+	return dl;
+}
+
+/**
+ * of_pwm_get() - request a PWM via the PWM framework
+ * @dev: device for PWM consumer
+ * @np: device node to get the PWM from
+ * @con_id: consumer name
+ *
+ * Returns the PWM device parsed from the phandle and index specified in the
+ * "pwms" property of a device tree node or a negative error-code on failure.
+ * Values parsed from the device tree are stored in the returned PWM device
+ * object.
+ *
+ * If con_id is NULL, the first PWM device listed in the "pwms" property will
+ * be requested. Otherwise the "pwm-names" property is used to do a reverse
+ * lookup of the PWM index. This also means that the "pwm-names" property
+ * becomes mandatory for devices that look up the PWM device via the con_id
+ * parameter.
+ *
+ * Returns: A pointer to the requested PWM device or an ERR_PTR()-encoded
+ * error code on failure.
+ */
+static struct pwm_device *of_pwm_get(struct device *dev, struct device_node *np,
+				     const char *con_id)
+{
+	struct pwm_device *pwm = NULL;
+	struct of_phandle_args args;
+	struct device_link *dl;
+	struct pwm_chip *pc;
+	int index = 0;
+	int err;
+
+	if (con_id) {
+		index = of_property_match_string(np, "pwm-names", con_id);
+		if (index < 0)
+			return ERR_PTR(index);
+	}
+
+	err = of_parse_phandle_with_args(np, "pwms", "#pwm-cells", index,
+					 &args);
+	if (err) {
+		pr_err("%s(): can't parse \"pwms\" property\n", __func__);
+		return ERR_PTR(err);
+	}
+
+	pc = fwnode_to_pwmchip(of_fwnode_handle(args.np));
+	if (IS_ERR(pc)) {
+		if (PTR_ERR(pc) != -EPROBE_DEFER)
+			pr_err("%s(): PWM chip not found\n", __func__);
+
+		pwm = ERR_CAST(pc);
+		goto put;
+	}
+
+	pwm = pc->of_xlate(pc, &args);
+	if (IS_ERR(pwm))
+		goto put;
+
+	dl = pwm_device_link_add(dev, pwm);
+	if (IS_ERR(dl)) {
+		/* of_xlate ended up calling pwm_request_from_chip() */
+		pwm_free(pwm);
+		pwm = ERR_CAST(dl);
+		goto put;
+	}
+
+	/*
+	 * If a consumer name was not given, try to look it up from the
+	 * "pwm-names" property if it exists. Otherwise use the name of
+	 * the user device node.
+	 */
+	if (!con_id) {
+		err = of_property_read_string_index(np, "pwm-names", index,
+						    &con_id);
+		if (err < 0)
+			con_id = np->name;
+	}
+
+	pwm->label = con_id;
+
+put:
+	of_node_put(args.np);
+
+	return pwm;
+}
+
+/**
+ * acpi_pwm_get() - request a PWM via parsing "pwms" property in ACPI
+ * @fwnode: firmware node to get the "pwms" property from
+ *
+ * Returns the PWM device parsed from the fwnode and index specified in the
+ * "pwms" property or a negative error-code on failure.
+ * Values parsed from the device tree are stored in the returned PWM device
+ * object.
+ *
+ * This is analogous to of_pwm_get() except con_id is not yet supported.
+ * ACPI entries must look like
+ * Package () {"pwms", Package ()
+ *     { <PWM device reference>, <PWM index>, <PWM period> [, <PWM flags>]}}
+ *
+ * Returns: A pointer to the requested PWM device or an ERR_PTR()-encoded
+ * error code on failure.
+ */
+static struct pwm_device *acpi_pwm_get(const struct fwnode_handle *fwnode)
+{
+	struct pwm_device *pwm;
+	struct fwnode_reference_args args;
+	struct pwm_chip *chip;
+	int ret;
+
+	memset(&args, 0, sizeof(args));
+
+	ret = __acpi_node_get_property_reference(fwnode, "pwms", 0, 3, &args);
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	if (args.nargs < 2)
+		return ERR_PTR(-EPROTO);
+
+	chip = fwnode_to_pwmchip(args.fwnode);
+	if (IS_ERR(chip))
+		return ERR_CAST(chip);
+
+	pwm = pwm_request_from_chip(chip, args.args[0], NULL);
+	if (IS_ERR(pwm))
+		return pwm;
+
+	pwm->args.period = args.args[1];
+	pwm->args.polarity = PWM_POLARITY_NORMAL;
+
+	if (args.nargs > 2 && args.args[2] & PWM_POLARITY_INVERTED)
+		pwm->args.polarity = PWM_POLARITY_INVERSED;
+
+	return pwm;
+}
+
+/**
+ * pwm_add_table() - register PWM device consumers
+ * @table: array of consumers to register
+ * @num: number of consumers in table
+ */
+void pwm_add_table(struct pwm_lookup *table, size_t num)
+{
+	mutex_lock(&pwm_lookup_lock);
+
+	while (num--) {
+		list_add_tail(&table->list, &pwm_lookup_list);
+		table++;
+	}
+
+	mutex_unlock(&pwm_lookup_lock);
+}
+
+/**
+ * pwm_remove_table() - unregister PWM device consumers
+ * @table: array of consumers to unregister
+ * @num: number of consumers in table
+ */
+void pwm_remove_table(struct pwm_lookup *table, size_t num)
+{
+	mutex_lock(&pwm_lookup_lock);
+
+	while (num--) {
+		list_del(&table->list);
+		table++;
+	}
+
+	mutex_unlock(&pwm_lookup_lock);
+}
+
+/**
+ * pwm_get() - look up and request a PWM device
+ * @dev: device for PWM consumer
+ * @con_id: consumer name
+ *
+ * Lookup is first attempted using DT. If the device was not instantiated from
+ * a device tree, a PWM chip and a relative index is looked up via a table
+ * supplied by board setup code (see pwm_add_table()).
+ *
+ * Once a PWM chip has been found the specified PWM device will be requested
+ * and is ready to be used.
+ *
+ * Returns: A pointer to the requested PWM device or an ERR_PTR()-encoded
+ * error code on failure.
+ */
+struct pwm_device *pwm_get(struct device *dev, const char *con_id)
+{
+	const struct fwnode_handle *fwnode = dev ? dev_fwnode(dev) : NULL;
+	const char *dev_id = dev ? dev_name(dev) : NULL;
+	struct pwm_device *pwm;
+	struct pwm_chip *chip;
+	struct device_link *dl;
+	unsigned int best = 0;
+	struct pwm_lookup *p, *chosen = NULL;
+	unsigned int match;
+	int err;
+
+	/* look up via DT first */
+	if (is_of_node(fwnode))
+		return of_pwm_get(dev, to_of_node(fwnode), con_id);
+
+	/* then lookup via ACPI */
+	if (is_acpi_node(fwnode)) {
+		pwm = acpi_pwm_get(fwnode);
+		if (!IS_ERR(pwm) || PTR_ERR(pwm) != -ENOENT)
+			return pwm;
+	}
+
+	/*
+	 * We look up the provider in the static table typically provided by
+	 * board setup code. We first try to lookup the consumer device by
+	 * name. If the consumer device was passed in as NULL or if no match
+	 * was found, we try to find the consumer by directly looking it up
+	 * by name.
+	 *
+	 * If a match is found, the provider PWM chip is looked up by name
+	 * and a PWM device is requested using the PWM device per-chip index.
+	 *
+	 * The lookup algorithm was shamelessly taken from the clock
+	 * framework:
+	 *
+	 * We do slightly fuzzy matching here:
+	 *  An entry with a NULL ID is assumed to be a wildcard.
+	 *  If an entry has a device ID, it must match
+	 *  If an entry has a connection ID, it must match
+	 * Then we take the most specific entry - with the following order
+	 * of precedence: dev+con > dev only > con only.
+	 */
+	mutex_lock(&pwm_lookup_lock);
+
+	list_for_each_entry(p, &pwm_lookup_list, list) {
+		match = 0;
+
+		if (p->dev_id) {
+			if (!dev_id || strcmp(p->dev_id, dev_id))
+				continue;
+
+			match += 2;
+		}
+
+		if (p->con_id) {
+			if (!con_id || strcmp(p->con_id, con_id))
+				continue;
+
+			match += 1;
+		}
+
+		if (match > best) {
+			chosen = p;
+
+			if (match != 3)
+				best = match;
+			else
+				break;
+		}
+	}
+
+	mutex_unlock(&pwm_lookup_lock);
+
+	if (!chosen)
+		return ERR_PTR(-ENODEV);
+
+	chip = pwmchip_find_by_name(chosen->provider);
+
+	/*
+	 * If the lookup entry specifies a module, load the module and retry
+	 * the PWM chip lookup. This can be used to work around driver load
+	 * ordering issues if driver's can't be made to properly support the
+	 * deferred probe mechanism.
+	 */
+	if (!chip && chosen->module) {
+		err = request_module(chosen->module);
+		if (err == 0)
+			chip = pwmchip_find_by_name(chosen->provider);
+	}
+
+	if (!chip)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	pwm = pwm_request_from_chip(chip, chosen->index, con_id ?: dev_id);
+	if (IS_ERR(pwm))
+		return pwm;
+
+	dl = pwm_device_link_add(dev, pwm);
+	if (IS_ERR(dl)) {
+		pwm_free(pwm);
+		return ERR_CAST(dl);
+	}
+
+	pwm->args.period = chosen->period;
+	pwm->args.polarity = chosen->polarity;
+
+	return pwm;
+}
+EXPORT_SYMBOL_GPL(pwm_get);
+
+/**
+ * pwm_put() - release a PWM device
+ * @pwm: PWM device
+ */
+void pwm_put(struct pwm_device *pwm)
+{
+	if (!pwm)
+		return;
+
+	mutex_lock(&pwm_lock);
+
+	if (!test_and_clear_bit(PWMF_REQUESTED, &pwm->flags)) {
+		pr_warn("PWM device already freed\n");
+		goto out;
+	}
+
+	if (pwm->chip->ops->free)
+		pwm->chip->ops->free(pwm->chip, pwm);
+
+	pwm_set_chip_data(pwm, NULL);
+	pwm->label = NULL;
+
+	module_put(pwm->chip->ops->owner);
+out:
+	mutex_unlock(&pwm_lock);
+}
+EXPORT_SYMBOL_GPL(pwm_put);
+
+static void devm_pwm_release(void *pwm)
+{
+	pwm_put(pwm);
+}
+
+/**
+ * devm_pwm_get() - resource managed pwm_get()
+ * @dev: device for PWM consumer
+ * @con_id: consumer name
+ *
+ * This function performs like pwm_get() but the acquired PWM device will
+ * automatically be released on driver detach.
+ *
+ * Returns: A pointer to the requested PWM device or an ERR_PTR()-encoded
+ * error code on failure.
+ */
+struct pwm_device *devm_pwm_get(struct device *dev, const char *con_id)
+{
+	struct pwm_device *pwm;
+	int ret;
+
+	pwm = pwm_get(dev, con_id);
+	if (IS_ERR(pwm))
+		return pwm;
+
+	ret = devm_add_action_or_reset(dev, devm_pwm_release, pwm);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return pwm;
+}
+EXPORT_SYMBOL_GPL(devm_pwm_get);
+
+/**
+ * devm_fwnode_pwm_get() - request a resource managed PWM from firmware node
+ * @dev: device for PWM consumer
+ * @fwnode: firmware node to get the PWM from
+ * @con_id: consumer name
+ *
+ * Returns the PWM device parsed from the firmware node. See of_pwm_get() and
+ * acpi_pwm_get() for a detailed description.
+ *
+ * Returns: A pointer to the requested PWM device or an ERR_PTR()-encoded
+ * error code on failure.
+ */
+struct pwm_device *devm_fwnode_pwm_get(struct device *dev,
+				       struct fwnode_handle *fwnode,
+				       const char *con_id)
+{
+	struct pwm_device *pwm = ERR_PTR(-ENODEV);
+	int ret;
+
+	if (is_of_node(fwnode))
+		pwm = of_pwm_get(dev, to_of_node(fwnode), con_id);
+	else if (is_acpi_node(fwnode))
+		pwm = acpi_pwm_get(fwnode);
+	if (IS_ERR(pwm))
+		return pwm;
+
+	ret = devm_add_action_or_reset(dev, devm_pwm_release, pwm);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return pwm;
+}
+EXPORT_SYMBOL_GPL(devm_fwnode_pwm_get);
+
+#ifdef CONFIG_DEBUG_FS
+static void pwm_dbg_show(struct pwm_chip *chip, struct seq_file *s)
+{
+	unsigned int i;
+
+	for (i = 0; i < chip->npwm; i++) {
+		struct pwm_device *pwm = &chip->pwms[i];
+		struct pwm_state state;
+
+		pwm_get_state(pwm, &state);
+
+		seq_printf(s, " pwm-%-3d (%-20.20s):", i, pwm->label);
+
+		if (test_bit(PWMF_REQUESTED, &pwm->flags))
+			seq_puts(s, " requested");
+
+		if (state.enabled)
+			seq_puts(s, " enabled");
+
+		seq_printf(s, " period: %llu ns", state.period);
+		seq_printf(s, " duty: %llu ns", state.duty_cycle);
+		seq_printf(s, " polarity: %s",
+			   state.polarity ? "inverse" : "normal");
+
+		if (state.usage_power)
+			seq_puts(s, " usage_power");
+
+		seq_puts(s, "\n");
+	}
+}
+
+static void *pwm_seq_start(struct seq_file *s, loff_t *pos)
+{
+	mutex_lock(&pwm_lock);
+	s->private = "";
+
+	return seq_list_start(&pwm_chips, *pos);
+}
+
+static void *pwm_seq_next(struct seq_file *s, void *v, loff_t *pos)
+{
+	s->private = "\n";
+
+	return seq_list_next(v, &pwm_chips, pos);
+}
+
+static void pwm_seq_stop(struct seq_file *s, void *v)
+{
+	mutex_unlock(&pwm_lock);
+}
+
+static int pwm_seq_show(struct seq_file *s, void *v)
+{
+	struct pwm_chip *chip = list_entry(v, struct pwm_chip, list);
+
+	seq_printf(s, "%s%s/%s, %d PWM device%s\n", (char *)s->private,
+		   chip->dev->bus ? chip->dev->bus->name : "no-bus",
+		   dev_name(chip->dev), chip->npwm,
+		   (chip->npwm != 1) ? "s" : "");
+
+	pwm_dbg_show(chip, s);
+
+	return 0;
+}
+
+static const struct seq_operations pwm_debugfs_sops = {
+	.start = pwm_seq_start,
+	.next = pwm_seq_next,
+	.stop = pwm_seq_stop,
+	.show = pwm_seq_show,
+};
+
+DEFINE_SEQ_ATTRIBUTE(pwm_debugfs);
+
+static int __init pwm_debugfs_init(void)
+{
+	debugfs_create_file("pwm", S_IFREG | 0444, NULL, NULL,
+			    &pwm_debugfs_fops);
+
+	return 0;
+}
+subsys_initcall(pwm_debugfs_init);
+#endif /* CONFIG_DEBUG_FS */
diff --git a/drivers/pwm/pwm-ab8500.c b/drivers/pwm/pwm-ab8500.c
new file mode 100644
index 000000000..5fa91f4cd
--- /dev/null
+++ b/drivers/pwm/pwm-ab8500.c
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Arun R Murthy <arun.murthy@stericsson.com>
+ */
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/pwm.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/module.h>
+
+/*
+ * PWM Out generators
+ * Bank: 0x10
+ */
+#define AB8500_PWM_OUT_CTRL1_REG	0x60
+#define AB8500_PWM_OUT_CTRL2_REG	0x61
+#define AB8500_PWM_OUT_CTRL7_REG	0x66
+
+struct ab8500_pwm_chip {
+	struct pwm_chip chip;
+	unsigned int hwid;
+};
+
+static struct ab8500_pwm_chip *ab8500_pwm_from_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct ab8500_pwm_chip, chip);
+}
+
+static int ab8500_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			    const struct pwm_state *state)
+{
+	int ret;
+	u8 reg;
+	unsigned int higher_val, lower_val;
+	struct ab8500_pwm_chip *ab8500 = ab8500_pwm_from_chip(chip);
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		ret = abx500_mask_and_set_register_interruptible(chip->dev,
+					AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
+					1 << ab8500->hwid, 0);
+
+		if (ret < 0)
+			dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
+								pwm->label, ret);
+		return ret;
+	}
+
+	/*
+	 * get the first 8 bits that are be written to
+	 * AB8500_PWM_OUT_CTRL1_REG[0:7]
+	 */
+	lower_val = state->duty_cycle & 0x00FF;
+	/*
+	 * get bits [9:10] that are to be written to
+	 * AB8500_PWM_OUT_CTRL2_REG[0:1]
+	 */
+	higher_val = ((state->duty_cycle & 0x0300) >> 8);
+
+	reg = AB8500_PWM_OUT_CTRL1_REG + (ab8500->hwid * 2);
+
+	ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC,
+			reg, (u8)lower_val);
+	if (ret < 0)
+		return ret;
+
+	ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC,
+			(reg + 1), (u8)higher_val);
+	if (ret < 0)
+		return ret;
+
+	ret = abx500_mask_and_set_register_interruptible(chip->dev,
+				AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
+				1 << ab8500->hwid, 1 << ab8500->hwid);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n",
+							pwm->label, ret);
+
+	return ret;
+}
+
+static const struct pwm_ops ab8500_pwm_ops = {
+	.apply = ab8500_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static int ab8500_pwm_probe(struct platform_device *pdev)
+{
+	struct ab8500_pwm_chip *ab8500;
+	int err;
+
+	if (pdev->id < 1 || pdev->id > 31)
+		return dev_err_probe(&pdev->dev, -EINVAL, "Invalid device id %d\n", pdev->id);
+
+	/*
+	 * Nothing to be done in probe, this is required to get the
+	 * device which is required for ab8500 read and write
+	 */
+	ab8500 = devm_kzalloc(&pdev->dev, sizeof(*ab8500), GFP_KERNEL);
+	if (ab8500 == NULL)
+		return -ENOMEM;
+
+	ab8500->chip.dev = &pdev->dev;
+	ab8500->chip.ops = &ab8500_pwm_ops;
+	ab8500->chip.npwm = 1;
+	ab8500->hwid = pdev->id - 1;
+
+	err = devm_pwmchip_add(&pdev->dev, &ab8500->chip);
+	if (err < 0)
+		return dev_err_probe(&pdev->dev, err, "Failed to add pwm chip\n");
+
+	dev_dbg(&pdev->dev, "pwm probe successful\n");
+
+	return 0;
+}
+
+static struct platform_driver ab8500_pwm_driver = {
+	.driver = {
+		.name = "ab8500-pwm",
+	},
+	.probe = ab8500_pwm_probe,
+};
+module_platform_driver(ab8500_pwm_driver);
+
+MODULE_AUTHOR("Arun MURTHY <arun.murthy@stericsson.com>");
+MODULE_DESCRIPTION("AB8500 Pulse Width Modulation Driver");
+MODULE_ALIAS("platform:ab8500-pwm");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-atmel-hlcdc.c b/drivers/pwm/pwm-atmel-hlcdc.c
new file mode 100644
index 000000000..a43b2babc
--- /dev/null
+++ b/drivers/pwm/pwm-atmel-hlcdc.c
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Free Electrons
+ * Copyright (C) 2014 Atmel
+ *
+ * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/mfd/atmel-hlcdc.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+
+#define ATMEL_HLCDC_PWMCVAL_MASK	GENMASK(15, 8)
+#define ATMEL_HLCDC_PWMCVAL(x)		(((x) << 8) & ATMEL_HLCDC_PWMCVAL_MASK)
+#define ATMEL_HLCDC_PWMPOL		BIT(4)
+#define ATMEL_HLCDC_PWMPS_MASK		GENMASK(2, 0)
+#define ATMEL_HLCDC_PWMPS_MAX		0x6
+#define ATMEL_HLCDC_PWMPS(x)		((x) & ATMEL_HLCDC_PWMPS_MASK)
+
+struct atmel_hlcdc_pwm_errata {
+	bool slow_clk_erratum;
+	bool div1_clk_erratum;
+};
+
+struct atmel_hlcdc_pwm {
+	struct pwm_chip chip;
+	struct atmel_hlcdc *hlcdc;
+	struct clk *cur_clk;
+	const struct atmel_hlcdc_pwm_errata *errata;
+};
+
+static inline struct atmel_hlcdc_pwm *to_atmel_hlcdc_pwm(struct pwm_chip *chip)
+{
+	return container_of(chip, struct atmel_hlcdc_pwm, chip);
+}
+
+static int atmel_hlcdc_pwm_apply(struct pwm_chip *c, struct pwm_device *pwm,
+				 const struct pwm_state *state)
+{
+	struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c);
+	struct atmel_hlcdc *hlcdc = chip->hlcdc;
+	unsigned int status;
+	int ret;
+
+	if (state->enabled) {
+		struct clk *new_clk = hlcdc->slow_clk;
+		u64 pwmcval = state->duty_cycle * 256;
+		unsigned long clk_freq;
+		u64 clk_period_ns;
+		u32 pwmcfg;
+		int pres;
+
+		if (!chip->errata || !chip->errata->slow_clk_erratum) {
+			clk_freq = clk_get_rate(new_clk);
+			if (!clk_freq)
+				return -EINVAL;
+
+			clk_period_ns = (u64)NSEC_PER_SEC * 256;
+			do_div(clk_period_ns, clk_freq);
+		}
+
+		/* Errata: cannot use slow clk on some IP revisions */
+		if ((chip->errata && chip->errata->slow_clk_erratum) ||
+		    clk_period_ns > state->period) {
+			new_clk = hlcdc->sys_clk;
+			clk_freq = clk_get_rate(new_clk);
+			if (!clk_freq)
+				return -EINVAL;
+
+			clk_period_ns = (u64)NSEC_PER_SEC * 256;
+			do_div(clk_period_ns, clk_freq);
+		}
+
+		for (pres = 0; pres <= ATMEL_HLCDC_PWMPS_MAX; pres++) {
+		/* Errata: cannot divide by 1 on some IP revisions */
+			if (!pres && chip->errata &&
+			    chip->errata->div1_clk_erratum)
+				continue;
+
+			if ((clk_period_ns << pres) >= state->period)
+				break;
+		}
+
+		if (pres > ATMEL_HLCDC_PWMPS_MAX)
+			return -EINVAL;
+
+		pwmcfg = ATMEL_HLCDC_PWMPS(pres);
+
+		if (new_clk != chip->cur_clk) {
+			u32 gencfg = 0;
+			int ret;
+
+			ret = clk_prepare_enable(new_clk);
+			if (ret)
+				return ret;
+
+			clk_disable_unprepare(chip->cur_clk);
+			chip->cur_clk = new_clk;
+
+			if (new_clk == hlcdc->sys_clk)
+				gencfg = ATMEL_HLCDC_CLKPWMSEL;
+
+			ret = regmap_update_bits(hlcdc->regmap,
+						 ATMEL_HLCDC_CFG(0),
+						 ATMEL_HLCDC_CLKPWMSEL,
+						 gencfg);
+			if (ret)
+				return ret;
+		}
+
+		do_div(pwmcval, state->period);
+
+		/*
+		 * The PWM duty cycle is configurable from 0/256 to 255/256 of
+		 * the period cycle. Hence we can't set a duty cycle occupying
+		 * the whole period cycle if we're asked to.
+		 * Set it to 255 if pwmcval is greater than 256.
+		 */
+		if (pwmcval > 255)
+			pwmcval = 255;
+
+		pwmcfg |= ATMEL_HLCDC_PWMCVAL(pwmcval);
+
+		if (state->polarity == PWM_POLARITY_NORMAL)
+			pwmcfg |= ATMEL_HLCDC_PWMPOL;
+
+		ret = regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(6),
+					 ATMEL_HLCDC_PWMCVAL_MASK |
+					 ATMEL_HLCDC_PWMPS_MASK |
+					 ATMEL_HLCDC_PWMPOL,
+					 pwmcfg);
+		if (ret)
+			return ret;
+
+		ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_EN,
+				   ATMEL_HLCDC_PWM);
+		if (ret)
+			return ret;
+
+		ret = regmap_read_poll_timeout(hlcdc->regmap, ATMEL_HLCDC_SR,
+					       status,
+					       status & ATMEL_HLCDC_PWM,
+					       10, 0);
+		if (ret)
+			return ret;
+	} else {
+		ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_DIS,
+				   ATMEL_HLCDC_PWM);
+		if (ret)
+			return ret;
+
+		ret = regmap_read_poll_timeout(hlcdc->regmap, ATMEL_HLCDC_SR,
+					       status,
+					       !(status & ATMEL_HLCDC_PWM),
+					       10, 0);
+		if (ret)
+			return ret;
+
+		clk_disable_unprepare(chip->cur_clk);
+		chip->cur_clk = NULL;
+	}
+
+	return 0;
+}
+
+static const struct pwm_ops atmel_hlcdc_pwm_ops = {
+	.apply = atmel_hlcdc_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static const struct atmel_hlcdc_pwm_errata atmel_hlcdc_pwm_at91sam9x5_errata = {
+	.slow_clk_erratum = true,
+};
+
+static const struct atmel_hlcdc_pwm_errata atmel_hlcdc_pwm_sama5d3_errata = {
+	.div1_clk_erratum = true,
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int atmel_hlcdc_pwm_suspend(struct device *dev)
+{
+	struct atmel_hlcdc_pwm *chip = dev_get_drvdata(dev);
+
+	/* Keep the periph clock enabled if the PWM is still running. */
+	if (pwm_is_enabled(&chip->chip.pwms[0]))
+		clk_disable_unprepare(chip->hlcdc->periph_clk);
+
+	return 0;
+}
+
+static int atmel_hlcdc_pwm_resume(struct device *dev)
+{
+	struct atmel_hlcdc_pwm *chip = dev_get_drvdata(dev);
+	struct pwm_state state;
+	int ret;
+
+	pwm_get_state(&chip->chip.pwms[0], &state);
+
+	/* Re-enable the periph clock it was stopped during suspend. */
+	if (!state.enabled) {
+		ret = clk_prepare_enable(chip->hlcdc->periph_clk);
+		if (ret)
+			return ret;
+	}
+
+	return atmel_hlcdc_pwm_apply(&chip->chip, &chip->chip.pwms[0], &state);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(atmel_hlcdc_pwm_pm_ops,
+			 atmel_hlcdc_pwm_suspend, atmel_hlcdc_pwm_resume);
+
+static const struct of_device_id atmel_hlcdc_dt_ids[] = {
+	{
+		.compatible = "atmel,at91sam9n12-hlcdc",
+		/* 9n12 has same errata as 9x5 HLCDC PWM */
+		.data = &atmel_hlcdc_pwm_at91sam9x5_errata,
+	},
+	{
+		.compatible = "atmel,at91sam9x5-hlcdc",
+		.data = &atmel_hlcdc_pwm_at91sam9x5_errata,
+	},
+	{
+		.compatible = "atmel,sama5d2-hlcdc",
+	},
+	{
+		.compatible = "atmel,sama5d3-hlcdc",
+		.data = &atmel_hlcdc_pwm_sama5d3_errata,
+	},
+	{
+		.compatible = "atmel,sama5d4-hlcdc",
+		.data = &atmel_hlcdc_pwm_sama5d3_errata,
+	},
+	{	.compatible = "microchip,sam9x60-hlcdc", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, atmel_hlcdc_dt_ids);
+
+static int atmel_hlcdc_pwm_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	struct device *dev = &pdev->dev;
+	struct atmel_hlcdc_pwm *chip;
+	struct atmel_hlcdc *hlcdc;
+	int ret;
+
+	hlcdc = dev_get_drvdata(dev->parent);
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	ret = clk_prepare_enable(hlcdc->periph_clk);
+	if (ret)
+		return ret;
+
+	match = of_match_node(atmel_hlcdc_dt_ids, dev->parent->of_node);
+	if (match)
+		chip->errata = match->data;
+
+	chip->hlcdc = hlcdc;
+	chip->chip.ops = &atmel_hlcdc_pwm_ops;
+	chip->chip.dev = dev;
+	chip->chip.npwm = 1;
+
+	ret = pwmchip_add(&chip->chip);
+	if (ret) {
+		clk_disable_unprepare(hlcdc->periph_clk);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, chip);
+
+	return 0;
+}
+
+static int atmel_hlcdc_pwm_remove(struct platform_device *pdev)
+{
+	struct atmel_hlcdc_pwm *chip = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&chip->chip);
+
+	clk_disable_unprepare(chip->hlcdc->periph_clk);
+
+	return 0;
+}
+
+static const struct of_device_id atmel_hlcdc_pwm_dt_ids[] = {
+	{ .compatible = "atmel,hlcdc-pwm" },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver atmel_hlcdc_pwm_driver = {
+	.driver = {
+		.name = "atmel-hlcdc-pwm",
+		.of_match_table = atmel_hlcdc_pwm_dt_ids,
+		.pm = &atmel_hlcdc_pwm_pm_ops,
+	},
+	.probe = atmel_hlcdc_pwm_probe,
+	.remove = atmel_hlcdc_pwm_remove,
+};
+module_platform_driver(atmel_hlcdc_pwm_driver);
+
+MODULE_ALIAS("platform:atmel-hlcdc-pwm");
+MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>");
+MODULE_DESCRIPTION("Atmel HLCDC PWM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-atmel-tcb.c b/drivers/pwm/pwm-atmel-tcb.c
new file mode 100644
index 000000000..2826fc216
--- /dev/null
+++ b/drivers/pwm/pwm-atmel-tcb.c
@@ -0,0 +1,573 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) Overkiz SAS 2012
+ *
+ * Author: Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <soc/at91/atmel_tcb.h>
+
+#define NPWM	2
+
+#define ATMEL_TC_ACMR_MASK	(ATMEL_TC_ACPA | ATMEL_TC_ACPC |	\
+				 ATMEL_TC_AEEVT | ATMEL_TC_ASWTRG)
+
+#define ATMEL_TC_BCMR_MASK	(ATMEL_TC_BCPB | ATMEL_TC_BCPC |	\
+				 ATMEL_TC_BEEVT | ATMEL_TC_BSWTRG)
+
+struct atmel_tcb_pwm_device {
+	enum pwm_polarity polarity;	/* PWM polarity */
+	unsigned div;			/* PWM clock divider */
+	unsigned duty;			/* PWM duty expressed in clk cycles */
+	unsigned period;		/* PWM period expressed in clk cycles */
+};
+
+struct atmel_tcb_channel {
+	u32 enabled;
+	u32 cmr;
+	u32 ra;
+	u32 rb;
+	u32 rc;
+};
+
+struct atmel_tcb_pwm_chip {
+	struct pwm_chip chip;
+	spinlock_t lock;
+	u8 channel;
+	u8 width;
+	struct regmap *regmap;
+	struct clk *clk;
+	struct clk *gclk;
+	struct clk *slow_clk;
+	struct atmel_tcb_pwm_device *pwms[NPWM];
+	struct atmel_tcb_channel bkup;
+};
+
+static const u8 atmel_tcb_divisors[] = { 2, 8, 32, 128, 0, };
+
+static inline struct atmel_tcb_pwm_chip *to_tcb_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct atmel_tcb_pwm_chip, chip);
+}
+
+static int atmel_tcb_pwm_set_polarity(struct pwm_chip *chip,
+				      struct pwm_device *pwm,
+				      enum pwm_polarity polarity)
+{
+	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
+	struct atmel_tcb_pwm_device *tcbpwm = tcbpwmc->pwms[pwm->hwpwm];
+
+	tcbpwm->polarity = polarity;
+
+	return 0;
+}
+
+static int atmel_tcb_pwm_request(struct pwm_chip *chip,
+				 struct pwm_device *pwm)
+{
+	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
+	struct atmel_tcb_pwm_device *tcbpwm;
+	unsigned cmr;
+	int ret;
+
+	tcbpwm = devm_kzalloc(chip->dev, sizeof(*tcbpwm), GFP_KERNEL);
+	if (!tcbpwm)
+		return -ENOMEM;
+
+	ret = clk_prepare_enable(tcbpwmc->clk);
+	if (ret) {
+		devm_kfree(chip->dev, tcbpwm);
+		return ret;
+	}
+
+	tcbpwm->polarity = PWM_POLARITY_NORMAL;
+	tcbpwm->duty = 0;
+	tcbpwm->period = 0;
+	tcbpwm->div = 0;
+
+	spin_lock(&tcbpwmc->lock);
+	regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr);
+	/*
+	 * Get init config from Timer Counter registers if
+	 * Timer Counter is already configured as a PWM generator.
+	 */
+	if (cmr & ATMEL_TC_WAVE) {
+		if (pwm->hwpwm == 0)
+			regmap_read(tcbpwmc->regmap,
+				    ATMEL_TC_REG(tcbpwmc->channel, RA),
+				    &tcbpwm->duty);
+		else
+			regmap_read(tcbpwmc->regmap,
+				    ATMEL_TC_REG(tcbpwmc->channel, RB),
+				    &tcbpwm->duty);
+
+		tcbpwm->div = cmr & ATMEL_TC_TCCLKS;
+		regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, RC),
+			    &tcbpwm->period);
+		cmr &= (ATMEL_TC_TCCLKS | ATMEL_TC_ACMR_MASK |
+			ATMEL_TC_BCMR_MASK);
+	} else
+		cmr = 0;
+
+	cmr |= ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO | ATMEL_TC_EEVT_XC0;
+	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr);
+	spin_unlock(&tcbpwmc->lock);
+
+	tcbpwmc->pwms[pwm->hwpwm] = tcbpwm;
+
+	return 0;
+}
+
+static void atmel_tcb_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
+	struct atmel_tcb_pwm_device *tcbpwm = tcbpwmc->pwms[pwm->hwpwm];
+
+	clk_disable_unprepare(tcbpwmc->clk);
+	tcbpwmc->pwms[pwm->hwpwm] = NULL;
+	devm_kfree(chip->dev, tcbpwm);
+}
+
+static void atmel_tcb_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
+	struct atmel_tcb_pwm_device *tcbpwm = tcbpwmc->pwms[pwm->hwpwm];
+	unsigned cmr;
+	enum pwm_polarity polarity = tcbpwm->polarity;
+
+	/*
+	 * If duty is 0 the timer will be stopped and we have to
+	 * configure the output correctly on software trigger:
+	 *  - set output to high if PWM_POLARITY_INVERSED
+	 *  - set output to low if PWM_POLARITY_NORMAL
+	 *
+	 * This is why we're reverting polarity in this case.
+	 */
+	if (tcbpwm->duty == 0)
+		polarity = !polarity;
+
+	spin_lock(&tcbpwmc->lock);
+	regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr);
+
+	/* flush old setting and set the new one */
+	if (pwm->hwpwm == 0) {
+		cmr &= ~ATMEL_TC_ACMR_MASK;
+		if (polarity == PWM_POLARITY_INVERSED)
+			cmr |= ATMEL_TC_ASWTRG_CLEAR;
+		else
+			cmr |= ATMEL_TC_ASWTRG_SET;
+	} else {
+		cmr &= ~ATMEL_TC_BCMR_MASK;
+		if (polarity == PWM_POLARITY_INVERSED)
+			cmr |= ATMEL_TC_BSWTRG_CLEAR;
+		else
+			cmr |= ATMEL_TC_BSWTRG_SET;
+	}
+
+	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr);
+
+	/*
+	 * Use software trigger to apply the new setting.
+	 * If both PWM devices in this group are disabled we stop the clock.
+	 */
+	if (!(cmr & (ATMEL_TC_ACPC | ATMEL_TC_BCPC))) {
+		regmap_write(tcbpwmc->regmap,
+			     ATMEL_TC_REG(tcbpwmc->channel, CCR),
+			     ATMEL_TC_SWTRG | ATMEL_TC_CLKDIS);
+		tcbpwmc->bkup.enabled = 1;
+	} else {
+		regmap_write(tcbpwmc->regmap,
+			     ATMEL_TC_REG(tcbpwmc->channel, CCR),
+			     ATMEL_TC_SWTRG);
+		tcbpwmc->bkup.enabled = 0;
+	}
+
+	spin_unlock(&tcbpwmc->lock);
+}
+
+static int atmel_tcb_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
+	struct atmel_tcb_pwm_device *tcbpwm = tcbpwmc->pwms[pwm->hwpwm];
+	u32 cmr;
+	enum pwm_polarity polarity = tcbpwm->polarity;
+
+	/*
+	 * If duty is 0 the timer will be stopped and we have to
+	 * configure the output correctly on software trigger:
+	 *  - set output to high if PWM_POLARITY_INVERSED
+	 *  - set output to low if PWM_POLARITY_NORMAL
+	 *
+	 * This is why we're reverting polarity in this case.
+	 */
+	if (tcbpwm->duty == 0)
+		polarity = !polarity;
+
+	spin_lock(&tcbpwmc->lock);
+	regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr);
+
+	/* flush old setting and set the new one */
+	cmr &= ~ATMEL_TC_TCCLKS;
+
+	if (pwm->hwpwm == 0) {
+		cmr &= ~ATMEL_TC_ACMR_MASK;
+
+		/* Set CMR flags according to given polarity */
+		if (polarity == PWM_POLARITY_INVERSED)
+			cmr |= ATMEL_TC_ASWTRG_CLEAR;
+		else
+			cmr |= ATMEL_TC_ASWTRG_SET;
+	} else {
+		cmr &= ~ATMEL_TC_BCMR_MASK;
+		if (polarity == PWM_POLARITY_INVERSED)
+			cmr |= ATMEL_TC_BSWTRG_CLEAR;
+		else
+			cmr |= ATMEL_TC_BSWTRG_SET;
+	}
+
+	/*
+	 * If duty is 0 or equal to period there's no need to register
+	 * a specific action on RA/RB and RC compare.
+	 * The output will be configured on software trigger and keep
+	 * this config till next config call.
+	 */
+	if (tcbpwm->duty != tcbpwm->period && tcbpwm->duty > 0) {
+		if (pwm->hwpwm == 0) {
+			if (polarity == PWM_POLARITY_INVERSED)
+				cmr |= ATMEL_TC_ACPA_SET | ATMEL_TC_ACPC_CLEAR;
+			else
+				cmr |= ATMEL_TC_ACPA_CLEAR | ATMEL_TC_ACPC_SET;
+		} else {
+			if (polarity == PWM_POLARITY_INVERSED)
+				cmr |= ATMEL_TC_BCPB_SET | ATMEL_TC_BCPC_CLEAR;
+			else
+				cmr |= ATMEL_TC_BCPB_CLEAR | ATMEL_TC_BCPC_SET;
+		}
+	}
+
+	cmr |= (tcbpwm->div & ATMEL_TC_TCCLKS);
+
+	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr);
+
+	if (pwm->hwpwm == 0)
+		regmap_write(tcbpwmc->regmap,
+			     ATMEL_TC_REG(tcbpwmc->channel, RA),
+			     tcbpwm->duty);
+	else
+		regmap_write(tcbpwmc->regmap,
+			     ATMEL_TC_REG(tcbpwmc->channel, RB),
+			     tcbpwm->duty);
+
+	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, RC),
+		     tcbpwm->period);
+
+	/* Use software trigger to apply the new setting */
+	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CCR),
+		     ATMEL_TC_SWTRG | ATMEL_TC_CLKEN);
+	tcbpwmc->bkup.enabled = 1;
+	spin_unlock(&tcbpwmc->lock);
+	return 0;
+}
+
+static int atmel_tcb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+				int duty_ns, int period_ns)
+{
+	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
+	struct atmel_tcb_pwm_device *tcbpwm = tcbpwmc->pwms[pwm->hwpwm];
+	struct atmel_tcb_pwm_device *atcbpwm = NULL;
+	int i = 0;
+	int slowclk = 0;
+	unsigned period;
+	unsigned duty;
+	unsigned rate = clk_get_rate(tcbpwmc->clk);
+	unsigned long long min;
+	unsigned long long max;
+
+	/*
+	 * Find best clk divisor:
+	 * the smallest divisor which can fulfill the period_ns requirements.
+	 * If there is a gclk, the first divisor is actually the gclk selector
+	 */
+	if (tcbpwmc->gclk)
+		i = 1;
+	for (; i < ARRAY_SIZE(atmel_tcb_divisors); ++i) {
+		if (atmel_tcb_divisors[i] == 0) {
+			slowclk = i;
+			continue;
+		}
+		min = div_u64((u64)NSEC_PER_SEC * atmel_tcb_divisors[i], rate);
+		max = min << tcbpwmc->width;
+		if (max >= period_ns)
+			break;
+	}
+
+	/*
+	 * If none of the divisor are small enough to represent period_ns
+	 * take slow clock (32KHz).
+	 */
+	if (i == ARRAY_SIZE(atmel_tcb_divisors)) {
+		i = slowclk;
+		rate = clk_get_rate(tcbpwmc->slow_clk);
+		min = div_u64(NSEC_PER_SEC, rate);
+		max = min << tcbpwmc->width;
+
+		/* If period is too big return ERANGE error */
+		if (max < period_ns)
+			return -ERANGE;
+	}
+
+	duty = div_u64(duty_ns, min);
+	period = div_u64(period_ns, min);
+
+	if (pwm->hwpwm == 0)
+		atcbpwm = tcbpwmc->pwms[1];
+	else
+		atcbpwm = tcbpwmc->pwms[0];
+
+	/*
+	 * PWM devices provided by the TCB driver are grouped by 2.
+	 * PWM devices in a given group must be configured with the
+	 * same period_ns.
+	 *
+	 * We're checking the period value of the second PWM device
+	 * in this group before applying the new config.
+	 */
+	if ((atcbpwm && atcbpwm->duty > 0 &&
+			atcbpwm->duty != atcbpwm->period) &&
+		(atcbpwm->div != i || atcbpwm->period != period)) {
+		dev_err(chip->dev,
+			"failed to configure period_ns: PWM group already configured with a different value\n");
+		return -EINVAL;
+	}
+
+	tcbpwm->period = period;
+	tcbpwm->div = i;
+	tcbpwm->duty = duty;
+
+	return 0;
+}
+
+static int atmel_tcb_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			       const struct pwm_state *state)
+{
+	int duty_cycle, period;
+	int ret;
+
+	/* This function only sets a flag in driver data */
+	atmel_tcb_pwm_set_polarity(chip, pwm, state->polarity);
+
+	if (!state->enabled) {
+		atmel_tcb_pwm_disable(chip, pwm);
+		return 0;
+	}
+
+	period = state->period < INT_MAX ? state->period : INT_MAX;
+	duty_cycle = state->duty_cycle < INT_MAX ? state->duty_cycle : INT_MAX;
+
+	ret = atmel_tcb_pwm_config(chip, pwm, duty_cycle, period);
+	if (ret)
+		return ret;
+
+	return atmel_tcb_pwm_enable(chip, pwm);
+}
+
+static const struct pwm_ops atmel_tcb_pwm_ops = {
+	.request = atmel_tcb_pwm_request,
+	.free = atmel_tcb_pwm_free,
+	.apply = atmel_tcb_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static struct atmel_tcb_config tcb_rm9200_config = {
+	.counter_width = 16,
+};
+
+static struct atmel_tcb_config tcb_sam9x5_config = {
+	.counter_width = 32,
+};
+
+static struct atmel_tcb_config tcb_sama5d2_config = {
+	.counter_width = 32,
+	.has_gclk = 1,
+};
+
+static const struct of_device_id atmel_tcb_of_match[] = {
+	{ .compatible = "atmel,at91rm9200-tcb", .data = &tcb_rm9200_config, },
+	{ .compatible = "atmel,at91sam9x5-tcb", .data = &tcb_sam9x5_config, },
+	{ .compatible = "atmel,sama5d2-tcb", .data = &tcb_sama5d2_config, },
+	{ /* sentinel */ }
+};
+
+static int atmel_tcb_pwm_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	struct atmel_tcb_pwm_chip *tcbpwm;
+	const struct atmel_tcb_config *config;
+	struct device_node *np = pdev->dev.of_node;
+	char clk_name[] = "t0_clk";
+	int err;
+	int channel;
+
+	tcbpwm = devm_kzalloc(&pdev->dev, sizeof(*tcbpwm), GFP_KERNEL);
+	if (tcbpwm == NULL)
+		return -ENOMEM;
+
+	err = of_property_read_u32(np, "reg", &channel);
+	if (err < 0) {
+		dev_err(&pdev->dev,
+			"failed to get Timer Counter Block channel from device tree (error: %d)\n",
+			err);
+		return err;
+	}
+
+	tcbpwm->regmap = syscon_node_to_regmap(np->parent);
+	if (IS_ERR(tcbpwm->regmap))
+		return PTR_ERR(tcbpwm->regmap);
+
+	tcbpwm->slow_clk = of_clk_get_by_name(np->parent, "slow_clk");
+	if (IS_ERR(tcbpwm->slow_clk))
+		return PTR_ERR(tcbpwm->slow_clk);
+
+	clk_name[1] += channel;
+	tcbpwm->clk = of_clk_get_by_name(np->parent, clk_name);
+	if (IS_ERR(tcbpwm->clk))
+		tcbpwm->clk = of_clk_get_by_name(np->parent, "t0_clk");
+	if (IS_ERR(tcbpwm->clk)) {
+		err = PTR_ERR(tcbpwm->clk);
+		goto err_slow_clk;
+	}
+
+	match = of_match_node(atmel_tcb_of_match, np->parent);
+	config = match->data;
+
+	if (config->has_gclk) {
+		tcbpwm->gclk = of_clk_get_by_name(np->parent, "gclk");
+		if (IS_ERR(tcbpwm->gclk)) {
+			err = PTR_ERR(tcbpwm->gclk);
+			goto err_clk;
+		}
+	}
+
+	tcbpwm->chip.dev = &pdev->dev;
+	tcbpwm->chip.ops = &atmel_tcb_pwm_ops;
+	tcbpwm->chip.npwm = NPWM;
+	tcbpwm->channel = channel;
+	tcbpwm->width = config->counter_width;
+
+	err = clk_prepare_enable(tcbpwm->slow_clk);
+	if (err)
+		goto err_gclk;
+
+	spin_lock_init(&tcbpwm->lock);
+
+	err = pwmchip_add(&tcbpwm->chip);
+	if (err < 0)
+		goto err_disable_clk;
+
+	platform_set_drvdata(pdev, tcbpwm);
+
+	return 0;
+
+err_disable_clk:
+	clk_disable_unprepare(tcbpwm->slow_clk);
+
+err_gclk:
+	clk_put(tcbpwm->gclk);
+
+err_clk:
+	clk_put(tcbpwm->clk);
+
+err_slow_clk:
+	clk_put(tcbpwm->slow_clk);
+
+	return err;
+}
+
+static void atmel_tcb_pwm_remove(struct platform_device *pdev)
+{
+	struct atmel_tcb_pwm_chip *tcbpwm = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&tcbpwm->chip);
+
+	clk_disable_unprepare(tcbpwm->slow_clk);
+	clk_put(tcbpwm->gclk);
+	clk_put(tcbpwm->clk);
+	clk_put(tcbpwm->slow_clk);
+}
+
+static const struct of_device_id atmel_tcb_pwm_dt_ids[] = {
+	{ .compatible = "atmel,tcb-pwm", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, atmel_tcb_pwm_dt_ids);
+
+#ifdef CONFIG_PM_SLEEP
+static int atmel_tcb_pwm_suspend(struct device *dev)
+{
+	struct atmel_tcb_pwm_chip *tcbpwm = dev_get_drvdata(dev);
+	struct atmel_tcb_channel *chan = &tcbpwm->bkup;
+	unsigned int channel = tcbpwm->channel;
+
+	regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, CMR), &chan->cmr);
+	regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, RA), &chan->ra);
+	regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, RB), &chan->rb);
+	regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, RC), &chan->rc);
+
+	return 0;
+}
+
+static int atmel_tcb_pwm_resume(struct device *dev)
+{
+	struct atmel_tcb_pwm_chip *tcbpwm = dev_get_drvdata(dev);
+	struct atmel_tcb_channel *chan = &tcbpwm->bkup;
+	unsigned int channel = tcbpwm->channel;
+
+	regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, CMR), chan->cmr);
+	regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, RA), chan->ra);
+	regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, RB), chan->rb);
+	regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, RC), chan->rc);
+
+	if (chan->enabled)
+		regmap_write(tcbpwm->regmap,
+			     ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
+			     ATMEL_TC_REG(channel, CCR));
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(atmel_tcb_pwm_pm_ops, atmel_tcb_pwm_suspend,
+			 atmel_tcb_pwm_resume);
+
+static struct platform_driver atmel_tcb_pwm_driver = {
+	.driver = {
+		.name = "atmel-tcb-pwm",
+		.of_match_table = atmel_tcb_pwm_dt_ids,
+		.pm = &atmel_tcb_pwm_pm_ops,
+	},
+	.probe = atmel_tcb_pwm_probe,
+	.remove_new = atmel_tcb_pwm_remove,
+};
+module_platform_driver(atmel_tcb_pwm_driver);
+
+MODULE_AUTHOR("Boris BREZILLON <b.brezillon@overkiz.com>");
+MODULE_DESCRIPTION("Atmel Timer Counter Pulse Width Modulation Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c
new file mode 100644
index 000000000..cdbc23649
--- /dev/null
+++ b/drivers/pwm/pwm-atmel.c
@@ -0,0 +1,538 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for Atmel Pulse Width Modulation Controller
+ *
+ * Copyright (C) 2013 Atmel Corporation
+ *		 Bo Shen <voice.shen@atmel.com>
+ *
+ * Links to reference manuals for the supported PWM chips can be found in
+ * Documentation/arm/microchip.rst.
+ *
+ * Limitations:
+ * - Periods start with the inactive level.
+ * - Hardware has to be stopped in general to update settings.
+ *
+ * Software bugs/possible improvements:
+ * - When atmel_pwm_apply() is called with state->enabled=false a change in
+ *   state->polarity isn't honored.
+ * - Instead of sleeping to wait for a completed period, the interrupt
+ *   functionality could be used.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+/* The following is global registers for PWM controller */
+#define PWM_ENA			0x04
+#define PWM_DIS			0x08
+#define PWM_SR			0x0C
+#define PWM_ISR			0x1C
+/* Bit field in SR */
+#define PWM_SR_ALL_CH_ON	0x0F
+
+/* The following register is PWM channel related registers */
+#define PWM_CH_REG_OFFSET	0x200
+#define PWM_CH_REG_SIZE		0x20
+
+#define PWM_CMR			0x0
+/* Bit field in CMR */
+#define PWM_CMR_CPOL		(1 << 9)
+#define PWM_CMR_UPD_CDTY	(1 << 10)
+#define PWM_CMR_CPRE_MSK	0xF
+
+/* The following registers for PWM v1 */
+#define PWMV1_CDTY		0x04
+#define PWMV1_CPRD		0x08
+#define PWMV1_CUPD		0x10
+
+/* The following registers for PWM v2 */
+#define PWMV2_CDTY		0x04
+#define PWMV2_CDTYUPD		0x08
+#define PWMV2_CPRD		0x0C
+#define PWMV2_CPRDUPD		0x10
+
+#define PWM_MAX_PRES		10
+
+struct atmel_pwm_registers {
+	u8 period;
+	u8 period_upd;
+	u8 duty;
+	u8 duty_upd;
+};
+
+struct atmel_pwm_config {
+	u32 period_bits;
+};
+
+struct atmel_pwm_data {
+	struct atmel_pwm_registers regs;
+	struct atmel_pwm_config cfg;
+};
+
+struct atmel_pwm_chip {
+	struct pwm_chip chip;
+	struct clk *clk;
+	void __iomem *base;
+	const struct atmel_pwm_data *data;
+
+	/*
+	 * The hardware supports a mechanism to update a channel's duty cycle at
+	 * the end of the currently running period. When such an update is
+	 * pending we delay disabling the PWM until the new configuration is
+	 * active because otherwise pmw_config(duty_cycle=0); pwm_disable();
+	 * might not result in an inactive output.
+	 * This bitmask tracks for which channels an update is pending in
+	 * hardware.
+	 */
+	u32 update_pending;
+
+	/* Protects .update_pending */
+	spinlock_t lock;
+};
+
+static inline struct atmel_pwm_chip *to_atmel_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct atmel_pwm_chip, chip);
+}
+
+static inline u32 atmel_pwm_readl(struct atmel_pwm_chip *chip,
+				  unsigned long offset)
+{
+	return readl_relaxed(chip->base + offset);
+}
+
+static inline void atmel_pwm_writel(struct atmel_pwm_chip *chip,
+				    unsigned long offset, unsigned long val)
+{
+	writel_relaxed(val, chip->base + offset);
+}
+
+static inline u32 atmel_pwm_ch_readl(struct atmel_pwm_chip *chip,
+				     unsigned int ch, unsigned long offset)
+{
+	unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE;
+
+	return atmel_pwm_readl(chip, base + offset);
+}
+
+static inline void atmel_pwm_ch_writel(struct atmel_pwm_chip *chip,
+				       unsigned int ch, unsigned long offset,
+				       unsigned long val)
+{
+	unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE;
+
+	atmel_pwm_writel(chip, base + offset, val);
+}
+
+static void atmel_pwm_update_pending(struct atmel_pwm_chip *chip)
+{
+	/*
+	 * Each channel that has its bit in ISR set started a new period since
+	 * ISR was cleared and so there is no more update pending.  Note that
+	 * reading ISR clears it, so this needs to handle all channels to not
+	 * loose information.
+	 */
+	u32 isr = atmel_pwm_readl(chip, PWM_ISR);
+
+	chip->update_pending &= ~isr;
+}
+
+static void atmel_pwm_set_pending(struct atmel_pwm_chip *chip, unsigned int ch)
+{
+	spin_lock(&chip->lock);
+
+	/*
+	 * Clear pending flags in hardware because otherwise there might still
+	 * be a stale flag in ISR.
+	 */
+	atmel_pwm_update_pending(chip);
+
+	chip->update_pending |= (1 << ch);
+
+	spin_unlock(&chip->lock);
+}
+
+static int atmel_pwm_test_pending(struct atmel_pwm_chip *chip, unsigned int ch)
+{
+	int ret = 0;
+
+	spin_lock(&chip->lock);
+
+	if (chip->update_pending & (1 << ch)) {
+		atmel_pwm_update_pending(chip);
+
+		if (chip->update_pending & (1 << ch))
+			ret = 1;
+	}
+
+	spin_unlock(&chip->lock);
+
+	return ret;
+}
+
+static int atmel_pwm_wait_nonpending(struct atmel_pwm_chip *chip, unsigned int ch)
+{
+	unsigned long timeout = jiffies + 2 * HZ;
+	int ret;
+
+	while ((ret = atmel_pwm_test_pending(chip, ch)) &&
+	       time_before(jiffies, timeout))
+		usleep_range(10, 100);
+
+	return ret ? -ETIMEDOUT : 0;
+}
+
+static int atmel_pwm_calculate_cprd_and_pres(struct pwm_chip *chip,
+					     unsigned long clkrate,
+					     const struct pwm_state *state,
+					     unsigned long *cprd, u32 *pres)
+{
+	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
+	unsigned long long cycles = state->period;
+	int shift;
+
+	/* Calculate the period cycles and prescale value */
+	cycles *= clkrate;
+	do_div(cycles, NSEC_PER_SEC);
+
+	/*
+	 * The register for the period length is cfg.period_bits bits wide.
+	 * So for each bit the number of clock cycles is wider divide the input
+	 * clock frequency by two using pres and shift cprd accordingly.
+	 */
+	shift = fls(cycles) - atmel_pwm->data->cfg.period_bits;
+
+	if (shift > PWM_MAX_PRES) {
+		dev_err(chip->dev, "pres exceeds the maximum value\n");
+		return -EINVAL;
+	} else if (shift > 0) {
+		*pres = shift;
+		cycles >>= *pres;
+	} else {
+		*pres = 0;
+	}
+
+	*cprd = cycles;
+
+	return 0;
+}
+
+static void atmel_pwm_calculate_cdty(const struct pwm_state *state,
+				     unsigned long clkrate, unsigned long cprd,
+				     u32 pres, unsigned long *cdty)
+{
+	unsigned long long cycles = state->duty_cycle;
+
+	cycles *= clkrate;
+	do_div(cycles, NSEC_PER_SEC);
+	cycles >>= pres;
+	*cdty = cprd - cycles;
+}
+
+static void atmel_pwm_update_cdty(struct pwm_chip *chip, struct pwm_device *pwm,
+				  unsigned long cdty)
+{
+	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
+	u32 val;
+
+	if (atmel_pwm->data->regs.duty_upd ==
+	    atmel_pwm->data->regs.period_upd) {
+		val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
+		val &= ~PWM_CMR_UPD_CDTY;
+		atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
+	}
+
+	atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm,
+			    atmel_pwm->data->regs.duty_upd, cdty);
+	atmel_pwm_set_pending(atmel_pwm, pwm->hwpwm);
+}
+
+static void atmel_pwm_set_cprd_cdty(struct pwm_chip *chip,
+				    struct pwm_device *pwm,
+				    unsigned long cprd, unsigned long cdty)
+{
+	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
+
+	atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm,
+			    atmel_pwm->data->regs.duty, cdty);
+	atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm,
+			    atmel_pwm->data->regs.period, cprd);
+}
+
+static void atmel_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm,
+			      bool disable_clk)
+{
+	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
+	unsigned long timeout;
+
+	atmel_pwm_wait_nonpending(atmel_pwm, pwm->hwpwm);
+
+	atmel_pwm_writel(atmel_pwm, PWM_DIS, 1 << pwm->hwpwm);
+
+	/*
+	 * Wait for the PWM channel disable operation to be effective before
+	 * stopping the clock.
+	 */
+	timeout = jiffies + 2 * HZ;
+
+	while ((atmel_pwm_readl(atmel_pwm, PWM_SR) & (1 << pwm->hwpwm)) &&
+	       time_before(jiffies, timeout))
+		usleep_range(10, 100);
+
+	if (disable_clk)
+		clk_disable(atmel_pwm->clk);
+}
+
+static int atmel_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			   const struct pwm_state *state)
+{
+	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
+	struct pwm_state cstate;
+	unsigned long cprd, cdty;
+	u32 pres, val;
+	int ret;
+
+	pwm_get_state(pwm, &cstate);
+
+	if (state->enabled) {
+		unsigned long clkrate = clk_get_rate(atmel_pwm->clk);
+
+		if (cstate.enabled &&
+		    cstate.polarity == state->polarity &&
+		    cstate.period == state->period) {
+			u32 cmr = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
+
+			cprd = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm,
+						  atmel_pwm->data->regs.period);
+			pres = cmr & PWM_CMR_CPRE_MSK;
+
+			atmel_pwm_calculate_cdty(state, clkrate, cprd, pres, &cdty);
+			atmel_pwm_update_cdty(chip, pwm, cdty);
+			return 0;
+		}
+
+		ret = atmel_pwm_calculate_cprd_and_pres(chip, clkrate, state, &cprd,
+							&pres);
+		if (ret) {
+			dev_err(chip->dev,
+				"failed to calculate cprd and prescaler\n");
+			return ret;
+		}
+
+		atmel_pwm_calculate_cdty(state, clkrate, cprd, pres, &cdty);
+
+		if (cstate.enabled) {
+			atmel_pwm_disable(chip, pwm, false);
+		} else {
+			ret = clk_enable(atmel_pwm->clk);
+			if (ret) {
+				dev_err(chip->dev, "failed to enable clock\n");
+				return ret;
+			}
+		}
+
+		/* It is necessary to preserve CPOL, inside CMR */
+		val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
+		val = (val & ~PWM_CMR_CPRE_MSK) | (pres & PWM_CMR_CPRE_MSK);
+		if (state->polarity == PWM_POLARITY_NORMAL)
+			val &= ~PWM_CMR_CPOL;
+		else
+			val |= PWM_CMR_CPOL;
+		atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
+		atmel_pwm_set_cprd_cdty(chip, pwm, cprd, cdty);
+		atmel_pwm_writel(atmel_pwm, PWM_ENA, 1 << pwm->hwpwm);
+	} else if (cstate.enabled) {
+		atmel_pwm_disable(chip, pwm, true);
+	}
+
+	return 0;
+}
+
+static int atmel_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+			       struct pwm_state *state)
+{
+	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
+	u32 sr, cmr;
+
+	sr = atmel_pwm_readl(atmel_pwm, PWM_SR);
+	cmr = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
+
+	if (sr & (1 << pwm->hwpwm)) {
+		unsigned long rate = clk_get_rate(atmel_pwm->clk);
+		u32 cdty, cprd, pres;
+		u64 tmp;
+
+		pres = cmr & PWM_CMR_CPRE_MSK;
+
+		cprd = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm,
+					  atmel_pwm->data->regs.period);
+		tmp = (u64)cprd * NSEC_PER_SEC;
+		tmp <<= pres;
+		state->period = DIV64_U64_ROUND_UP(tmp, rate);
+
+		/* Wait for an updated duty_cycle queued in hardware */
+		atmel_pwm_wait_nonpending(atmel_pwm, pwm->hwpwm);
+
+		cdty = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm,
+					  atmel_pwm->data->regs.duty);
+		tmp = (u64)(cprd - cdty) * NSEC_PER_SEC;
+		tmp <<= pres;
+		state->duty_cycle = DIV64_U64_ROUND_UP(tmp, rate);
+
+		state->enabled = true;
+	} else {
+		state->enabled = false;
+	}
+
+	if (cmr & PWM_CMR_CPOL)
+		state->polarity = PWM_POLARITY_INVERSED;
+	else
+		state->polarity = PWM_POLARITY_NORMAL;
+
+	return 0;
+}
+
+static const struct pwm_ops atmel_pwm_ops = {
+	.apply = atmel_pwm_apply,
+	.get_state = atmel_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static const struct atmel_pwm_data atmel_sam9rl_pwm_data = {
+	.regs = {
+		.period		= PWMV1_CPRD,
+		.period_upd	= PWMV1_CUPD,
+		.duty		= PWMV1_CDTY,
+		.duty_upd	= PWMV1_CUPD,
+	},
+	.cfg = {
+		/* 16 bits to keep period and duty. */
+		.period_bits	= 16,
+	},
+};
+
+static const struct atmel_pwm_data atmel_sama5_pwm_data = {
+	.regs = {
+		.period		= PWMV2_CPRD,
+		.period_upd	= PWMV2_CPRDUPD,
+		.duty		= PWMV2_CDTY,
+		.duty_upd	= PWMV2_CDTYUPD,
+	},
+	.cfg = {
+		/* 16 bits to keep period and duty. */
+		.period_bits	= 16,
+	},
+};
+
+static const struct atmel_pwm_data mchp_sam9x60_pwm_data = {
+	.regs = {
+		.period		= PWMV1_CPRD,
+		.period_upd	= PWMV1_CUPD,
+		.duty		= PWMV1_CDTY,
+		.duty_upd	= PWMV1_CUPD,
+	},
+	.cfg = {
+		/* 32 bits to keep period and duty. */
+		.period_bits	= 32,
+	},
+};
+
+static const struct of_device_id atmel_pwm_dt_ids[] = {
+	{
+		.compatible = "atmel,at91sam9rl-pwm",
+		.data = &atmel_sam9rl_pwm_data,
+	}, {
+		.compatible = "atmel,sama5d3-pwm",
+		.data = &atmel_sama5_pwm_data,
+	}, {
+		.compatible = "atmel,sama5d2-pwm",
+		.data = &atmel_sama5_pwm_data,
+	}, {
+		.compatible = "microchip,sam9x60-pwm",
+		.data = &mchp_sam9x60_pwm_data,
+	}, {
+		/* sentinel */
+	},
+};
+MODULE_DEVICE_TABLE(of, atmel_pwm_dt_ids);
+
+static int atmel_pwm_probe(struct platform_device *pdev)
+{
+	struct atmel_pwm_chip *atmel_pwm;
+	int ret;
+
+	atmel_pwm = devm_kzalloc(&pdev->dev, sizeof(*atmel_pwm), GFP_KERNEL);
+	if (!atmel_pwm)
+		return -ENOMEM;
+
+	atmel_pwm->data = of_device_get_match_data(&pdev->dev);
+
+	atmel_pwm->update_pending = 0;
+	spin_lock_init(&atmel_pwm->lock);
+
+	atmel_pwm->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(atmel_pwm->base))
+		return PTR_ERR(atmel_pwm->base);
+
+	atmel_pwm->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(atmel_pwm->clk))
+		return PTR_ERR(atmel_pwm->clk);
+
+	ret = clk_prepare(atmel_pwm->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to prepare PWM clock\n");
+		return ret;
+	}
+
+	atmel_pwm->chip.dev = &pdev->dev;
+	atmel_pwm->chip.ops = &atmel_pwm_ops;
+	atmel_pwm->chip.npwm = 4;
+
+	ret = pwmchip_add(&atmel_pwm->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add PWM chip %d\n", ret);
+		goto unprepare_clk;
+	}
+
+	platform_set_drvdata(pdev, atmel_pwm);
+
+	return ret;
+
+unprepare_clk:
+	clk_unprepare(atmel_pwm->clk);
+	return ret;
+}
+
+static int atmel_pwm_remove(struct platform_device *pdev)
+{
+	struct atmel_pwm_chip *atmel_pwm = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&atmel_pwm->chip);
+
+	clk_unprepare(atmel_pwm->clk);
+
+	return 0;
+}
+
+static struct platform_driver atmel_pwm_driver = {
+	.driver = {
+		.name = "atmel-pwm",
+		.of_match_table = of_match_ptr(atmel_pwm_dt_ids),
+	},
+	.probe = atmel_pwm_probe,
+	.remove = atmel_pwm_remove,
+};
+module_platform_driver(atmel_pwm_driver);
+
+MODULE_ALIAS("platform:atmel-pwm");
+MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>");
+MODULE_DESCRIPTION("Atmel PWM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-bcm-iproc.c b/drivers/pwm/pwm-bcm-iproc.c
new file mode 100644
index 000000000..97ec131eb
--- /dev/null
+++ b/drivers/pwm/pwm-bcm-iproc.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2016 Broadcom
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+#define IPROC_PWM_CTRL_OFFSET			0x00
+#define IPROC_PWM_CTRL_TYPE_SHIFT(ch)		(15 + (ch))
+#define IPROC_PWM_CTRL_POLARITY_SHIFT(ch)	(8 + (ch))
+#define IPROC_PWM_CTRL_EN_SHIFT(ch)		(ch)
+
+#define IPROC_PWM_PERIOD_OFFSET(ch)		(0x04 + ((ch) << 3))
+#define IPROC_PWM_PERIOD_MIN			0x02
+#define IPROC_PWM_PERIOD_MAX			0xffff
+
+#define IPROC_PWM_DUTY_CYCLE_OFFSET(ch)		(0x08 + ((ch) << 3))
+#define IPROC_PWM_DUTY_CYCLE_MIN		0x00
+#define IPROC_PWM_DUTY_CYCLE_MAX		0xffff
+
+#define IPROC_PWM_PRESCALE_OFFSET		0x24
+#define IPROC_PWM_PRESCALE_BITS			0x06
+#define IPROC_PWM_PRESCALE_SHIFT(ch)		((3 - (ch)) * \
+						 IPROC_PWM_PRESCALE_BITS)
+#define IPROC_PWM_PRESCALE_MASK(ch)		(IPROC_PWM_PRESCALE_MAX << \
+						 IPROC_PWM_PRESCALE_SHIFT(ch))
+#define IPROC_PWM_PRESCALE_MIN			0x00
+#define IPROC_PWM_PRESCALE_MAX			0x3f
+
+struct iproc_pwmc {
+	struct pwm_chip chip;
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static inline struct iproc_pwmc *to_iproc_pwmc(struct pwm_chip *chip)
+{
+	return container_of(chip, struct iproc_pwmc, chip);
+}
+
+static void iproc_pwmc_enable(struct iproc_pwmc *ip, unsigned int channel)
+{
+	u32 value;
+
+	value = readl(ip->base + IPROC_PWM_CTRL_OFFSET);
+	value |= 1 << IPROC_PWM_CTRL_EN_SHIFT(channel);
+	writel(value, ip->base + IPROC_PWM_CTRL_OFFSET);
+
+	/* must be a 400 ns delay between clearing and setting enable bit */
+	ndelay(400);
+}
+
+static void iproc_pwmc_disable(struct iproc_pwmc *ip, unsigned int channel)
+{
+	u32 value;
+
+	value = readl(ip->base + IPROC_PWM_CTRL_OFFSET);
+	value &= ~(1 << IPROC_PWM_CTRL_EN_SHIFT(channel));
+	writel(value, ip->base + IPROC_PWM_CTRL_OFFSET);
+
+	/* must be a 400 ns delay between clearing and setting enable bit */
+	ndelay(400);
+}
+
+static int iproc_pwmc_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+				struct pwm_state *state)
+{
+	struct iproc_pwmc *ip = to_iproc_pwmc(chip);
+	u64 tmp, multi, rate;
+	u32 value, prescale;
+
+	value = readl(ip->base + IPROC_PWM_CTRL_OFFSET);
+
+	if (value & BIT(IPROC_PWM_CTRL_EN_SHIFT(pwm->hwpwm)))
+		state->enabled = true;
+	else
+		state->enabled = false;
+
+	if (value & BIT(IPROC_PWM_CTRL_POLARITY_SHIFT(pwm->hwpwm)))
+		state->polarity = PWM_POLARITY_NORMAL;
+	else
+		state->polarity = PWM_POLARITY_INVERSED;
+
+	rate = clk_get_rate(ip->clk);
+	if (rate == 0) {
+		state->period = 0;
+		state->duty_cycle = 0;
+		return 0;
+	}
+
+	value = readl(ip->base + IPROC_PWM_PRESCALE_OFFSET);
+	prescale = value >> IPROC_PWM_PRESCALE_SHIFT(pwm->hwpwm);
+	prescale &= IPROC_PWM_PRESCALE_MAX;
+
+	multi = NSEC_PER_SEC * (prescale + 1);
+
+	value = readl(ip->base + IPROC_PWM_PERIOD_OFFSET(pwm->hwpwm));
+	tmp = (value & IPROC_PWM_PERIOD_MAX) * multi;
+	state->period = div64_u64(tmp, rate);
+
+	value = readl(ip->base + IPROC_PWM_DUTY_CYCLE_OFFSET(pwm->hwpwm));
+	tmp = (value & IPROC_PWM_PERIOD_MAX) * multi;
+	state->duty_cycle = div64_u64(tmp, rate);
+
+	return 0;
+}
+
+static int iproc_pwmc_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			    const struct pwm_state *state)
+{
+	unsigned long prescale = IPROC_PWM_PRESCALE_MIN;
+	struct iproc_pwmc *ip = to_iproc_pwmc(chip);
+	u32 value, period, duty;
+	u64 rate;
+
+	rate = clk_get_rate(ip->clk);
+
+	/*
+	 * Find period count, duty count and prescale to suit duty_cycle and
+	 * period. This is done according to formulas described below:
+	 *
+	 * period_ns = 10^9 * (PRESCALE + 1) * PC / PWM_CLK_RATE
+	 * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+	 *
+	 * PC = (PWM_CLK_RATE * period_ns) / (10^9 * (PRESCALE + 1))
+	 * DC = (PWM_CLK_RATE * duty_ns) / (10^9 * (PRESCALE + 1))
+	 */
+	while (1) {
+		u64 value, div;
+
+		div = NSEC_PER_SEC * (prescale + 1);
+		value = rate * state->period;
+		period = div64_u64(value, div);
+		value = rate * state->duty_cycle;
+		duty = div64_u64(value, div);
+
+		if (period < IPROC_PWM_PERIOD_MIN)
+			return -EINVAL;
+
+		if (period <= IPROC_PWM_PERIOD_MAX &&
+		     duty <= IPROC_PWM_DUTY_CYCLE_MAX)
+			break;
+
+		/* Otherwise, increase prescale and recalculate counts */
+		if (++prescale > IPROC_PWM_PRESCALE_MAX)
+			return -EINVAL;
+	}
+
+	iproc_pwmc_disable(ip, pwm->hwpwm);
+
+	/* Set prescale */
+	value = readl(ip->base + IPROC_PWM_PRESCALE_OFFSET);
+	value &= ~IPROC_PWM_PRESCALE_MASK(pwm->hwpwm);
+	value |= prescale << IPROC_PWM_PRESCALE_SHIFT(pwm->hwpwm);
+	writel(value, ip->base + IPROC_PWM_PRESCALE_OFFSET);
+
+	/* set period and duty cycle */
+	writel(period, ip->base + IPROC_PWM_PERIOD_OFFSET(pwm->hwpwm));
+	writel(duty, ip->base + IPROC_PWM_DUTY_CYCLE_OFFSET(pwm->hwpwm));
+
+	/* set polarity */
+	value = readl(ip->base + IPROC_PWM_CTRL_OFFSET);
+
+	if (state->polarity == PWM_POLARITY_NORMAL)
+		value |= 1 << IPROC_PWM_CTRL_POLARITY_SHIFT(pwm->hwpwm);
+	else
+		value &= ~(1 << IPROC_PWM_CTRL_POLARITY_SHIFT(pwm->hwpwm));
+
+	writel(value, ip->base + IPROC_PWM_CTRL_OFFSET);
+
+	if (state->enabled)
+		iproc_pwmc_enable(ip, pwm->hwpwm);
+
+	return 0;
+}
+
+static const struct pwm_ops iproc_pwm_ops = {
+	.apply = iproc_pwmc_apply,
+	.get_state = iproc_pwmc_get_state,
+	.owner = THIS_MODULE,
+};
+
+static int iproc_pwmc_probe(struct platform_device *pdev)
+{
+	struct iproc_pwmc *ip;
+	unsigned int i;
+	u32 value;
+	int ret;
+
+	ip = devm_kzalloc(&pdev->dev, sizeof(*ip), GFP_KERNEL);
+	if (!ip)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ip);
+
+	ip->chip.dev = &pdev->dev;
+	ip->chip.ops = &iproc_pwm_ops;
+	ip->chip.npwm = 4;
+
+	ip->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ip->base))
+		return PTR_ERR(ip->base);
+
+	ip->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(ip->clk)) {
+		dev_err(&pdev->dev, "failed to get clock: %ld\n",
+			PTR_ERR(ip->clk));
+		return PTR_ERR(ip->clk);
+	}
+
+	ret = clk_prepare_enable(ip->clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to enable clock: %d\n", ret);
+		return ret;
+	}
+
+	/* Set full drive and normal polarity for all channels */
+	value = readl(ip->base + IPROC_PWM_CTRL_OFFSET);
+
+	for (i = 0; i < ip->chip.npwm; i++) {
+		value &= ~(1 << IPROC_PWM_CTRL_TYPE_SHIFT(i));
+		value |= 1 << IPROC_PWM_CTRL_POLARITY_SHIFT(i);
+	}
+
+	writel(value, ip->base + IPROC_PWM_CTRL_OFFSET);
+
+	ret = pwmchip_add(&ip->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
+		clk_disable_unprepare(ip->clk);
+	}
+
+	return ret;
+}
+
+static int iproc_pwmc_remove(struct platform_device *pdev)
+{
+	struct iproc_pwmc *ip = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&ip->chip);
+
+	clk_disable_unprepare(ip->clk);
+
+	return 0;
+}
+
+static const struct of_device_id bcm_iproc_pwmc_dt[] = {
+	{ .compatible = "brcm,iproc-pwm" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bcm_iproc_pwmc_dt);
+
+static struct platform_driver iproc_pwmc_driver = {
+	.driver = {
+		.name = "bcm-iproc-pwm",
+		.of_match_table = bcm_iproc_pwmc_dt,
+	},
+	.probe = iproc_pwmc_probe,
+	.remove = iproc_pwmc_remove,
+};
+module_platform_driver(iproc_pwmc_driver);
+
+MODULE_AUTHOR("Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom iProc PWM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-bcm-kona.c b/drivers/pwm/pwm-bcm-kona.c
new file mode 100644
index 000000000..4fa6e249e
--- /dev/null
+++ b/drivers/pwm/pwm-bcm-kona.c
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Broadcom Corporation
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+/*
+ * The Kona PWM has some unusual characteristics.  Here are the main points.
+ *
+ * 1) There is no disable bit and the hardware docs advise programming a zero
+ *    duty to achieve output equivalent to that of a normal disable operation.
+ *
+ * 2) Changes to prescale, duty, period, and polarity do not take effect until
+ *    a subsequent rising edge of the trigger bit.
+ *
+ * 3) If the smooth bit and trigger bit are both low, the output is a constant
+ *    high signal.  Otherwise, the earlier waveform continues to be output.
+ *
+ * 4) If the smooth bit is set on the rising edge of the trigger bit, output
+ *    will transition to the new settings on a period boundary (which could be
+ *    seconds away).  If the smooth bit is clear, new settings will be applied
+ *    as soon as possible (the hardware always has a 400ns delay).
+ *
+ * 5) When the external clock that feeds the PWM is disabled, output is pegged
+ *    high or low depending on its state at that exact instant.
+ */
+
+#define PWM_CONTROL_OFFSET			0x00000000
+#define PWM_CONTROL_SMOOTH_SHIFT(chan)		(24 + (chan))
+#define PWM_CONTROL_TYPE_SHIFT(chan)		(16 + (chan))
+#define PWM_CONTROL_POLARITY_SHIFT(chan)	(8 + (chan))
+#define PWM_CONTROL_TRIGGER_SHIFT(chan)		(chan)
+
+#define PRESCALE_OFFSET				0x00000004
+#define PRESCALE_SHIFT(chan)			((chan) << 2)
+#define PRESCALE_MASK(chan)			(0x7 << PRESCALE_SHIFT(chan))
+#define PRESCALE_MIN				0x00000000
+#define PRESCALE_MAX				0x00000007
+
+#define PERIOD_COUNT_OFFSET(chan)		(0x00000008 + ((chan) << 3))
+#define PERIOD_COUNT_MIN			0x00000002
+#define PERIOD_COUNT_MAX			0x00ffffff
+
+#define DUTY_CYCLE_HIGH_OFFSET(chan)		(0x0000000c + ((chan) << 3))
+#define DUTY_CYCLE_HIGH_MIN			0x00000000
+#define DUTY_CYCLE_HIGH_MAX			0x00ffffff
+
+struct kona_pwmc {
+	struct pwm_chip chip;
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static inline struct kona_pwmc *to_kona_pwmc(struct pwm_chip *_chip)
+{
+	return container_of(_chip, struct kona_pwmc, chip);
+}
+
+/*
+ * Clear trigger bit but set smooth bit to maintain old output.
+ */
+static void kona_pwmc_prepare_for_settings(struct kona_pwmc *kp,
+	unsigned int chan)
+{
+	unsigned int value = readl(kp->base + PWM_CONTROL_OFFSET);
+
+	value |= 1 << PWM_CONTROL_SMOOTH_SHIFT(chan);
+	value &= ~(1 << PWM_CONTROL_TRIGGER_SHIFT(chan));
+	writel(value, kp->base + PWM_CONTROL_OFFSET);
+
+	/*
+	 * There must be a min 400ns delay between clearing trigger and setting
+	 * it. Failing to do this may result in no PWM signal.
+	 */
+	ndelay(400);
+}
+
+static void kona_pwmc_apply_settings(struct kona_pwmc *kp, unsigned int chan)
+{
+	unsigned int value = readl(kp->base + PWM_CONTROL_OFFSET);
+
+	/* Set trigger bit and clear smooth bit to apply new settings */
+	value &= ~(1 << PWM_CONTROL_SMOOTH_SHIFT(chan));
+	value |= 1 << PWM_CONTROL_TRIGGER_SHIFT(chan);
+	writel(value, kp->base + PWM_CONTROL_OFFSET);
+
+	/* Trigger bit must be held high for at least 400 ns. */
+	ndelay(400);
+}
+
+static int kona_pwmc_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			    u64 duty_ns, u64 period_ns)
+{
+	struct kona_pwmc *kp = to_kona_pwmc(chip);
+	u64 div, rate;
+	unsigned long prescale = PRESCALE_MIN, pc, dc;
+	unsigned int value, chan = pwm->hwpwm;
+
+	/*
+	 * Find period count, duty count and prescale to suit duty_ns and
+	 * period_ns. This is done according to formulas described below:
+	 *
+	 * period_ns = 10^9 * (PRESCALE + 1) * PC / PWM_CLK_RATE
+	 * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+	 *
+	 * PC = (PWM_CLK_RATE * period_ns) / (10^9 * (PRESCALE + 1))
+	 * DC = (PWM_CLK_RATE * duty_ns) / (10^9 * (PRESCALE + 1))
+	 */
+
+	rate = clk_get_rate(kp->clk);
+
+	while (1) {
+		div = 1000000000;
+		div *= 1 + prescale;
+		pc = mul_u64_u64_div_u64(rate, period_ns, div);
+		dc = mul_u64_u64_div_u64(rate, duty_ns, div);
+
+		/* If duty_ns or period_ns are not achievable then return */
+		if (pc < PERIOD_COUNT_MIN)
+			return -EINVAL;
+
+		/* If pc and dc are in bounds, the calculation is done */
+		if (pc <= PERIOD_COUNT_MAX && dc <= DUTY_CYCLE_HIGH_MAX)
+			break;
+
+		/* Otherwise, increase prescale and recalculate pc and dc */
+		if (++prescale > PRESCALE_MAX)
+			return -EINVAL;
+	}
+
+	kona_pwmc_prepare_for_settings(kp, chan);
+
+	value = readl(kp->base + PRESCALE_OFFSET);
+	value &= ~PRESCALE_MASK(chan);
+	value |= prescale << PRESCALE_SHIFT(chan);
+	writel(value, kp->base + PRESCALE_OFFSET);
+
+	writel(pc, kp->base + PERIOD_COUNT_OFFSET(chan));
+
+	writel(dc, kp->base + DUTY_CYCLE_HIGH_OFFSET(chan));
+
+	kona_pwmc_apply_settings(kp, chan);
+
+	return 0;
+}
+
+static int kona_pwmc_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
+				  enum pwm_polarity polarity)
+{
+	struct kona_pwmc *kp = to_kona_pwmc(chip);
+	unsigned int chan = pwm->hwpwm;
+	unsigned int value;
+	int ret;
+
+	ret = clk_prepare_enable(kp->clk);
+	if (ret < 0) {
+		dev_err(chip->dev, "failed to enable clock: %d\n", ret);
+		return ret;
+	}
+
+	kona_pwmc_prepare_for_settings(kp, chan);
+
+	value = readl(kp->base + PWM_CONTROL_OFFSET);
+
+	if (polarity == PWM_POLARITY_NORMAL)
+		value |= 1 << PWM_CONTROL_POLARITY_SHIFT(chan);
+	else
+		value &= ~(1 << PWM_CONTROL_POLARITY_SHIFT(chan));
+
+	writel(value, kp->base + PWM_CONTROL_OFFSET);
+
+	kona_pwmc_apply_settings(kp, chan);
+
+	clk_disable_unprepare(kp->clk);
+
+	return 0;
+}
+
+static int kona_pwmc_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct kona_pwmc *kp = to_kona_pwmc(chip);
+	int ret;
+
+	ret = clk_prepare_enable(kp->clk);
+	if (ret < 0) {
+		dev_err(chip->dev, "failed to enable clock: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void kona_pwmc_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct kona_pwmc *kp = to_kona_pwmc(chip);
+	unsigned int chan = pwm->hwpwm;
+	unsigned int value;
+
+	kona_pwmc_prepare_for_settings(kp, chan);
+
+	/* Simulate a disable by configuring for zero duty */
+	writel(0, kp->base + DUTY_CYCLE_HIGH_OFFSET(chan));
+	writel(0, kp->base + PERIOD_COUNT_OFFSET(chan));
+
+	/* Set prescale to 0 for this channel */
+	value = readl(kp->base + PRESCALE_OFFSET);
+	value &= ~PRESCALE_MASK(chan);
+	writel(value, kp->base + PRESCALE_OFFSET);
+
+	kona_pwmc_apply_settings(kp, chan);
+
+	clk_disable_unprepare(kp->clk);
+}
+
+static int kona_pwmc_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			   const struct pwm_state *state)
+{
+	int err;
+	struct kona_pwmc *kp = to_kona_pwmc(chip);
+	bool enabled = pwm->state.enabled;
+
+	if (state->polarity != pwm->state.polarity) {
+		if (enabled) {
+			kona_pwmc_disable(chip, pwm);
+			enabled = false;
+		}
+
+		err = kona_pwmc_set_polarity(chip, pwm, state->polarity);
+		if (err)
+			return err;
+
+		pwm->state.polarity = state->polarity;
+	}
+
+	if (!state->enabled) {
+		if (enabled)
+			kona_pwmc_disable(chip, pwm);
+		return 0;
+	} else if (!enabled) {
+		/*
+		 * This is a bit special here, usually the PWM should only be
+		 * enabled when duty and period are setup. But before this
+		 * driver was converted to .apply it was done the other way
+		 * around and so this behaviour was kept even though this might
+		 * result in a glitch. This might be improvable by someone with
+		 * hardware and/or documentation.
+		 */
+		err = kona_pwmc_enable(chip, pwm);
+		if (err)
+			return err;
+	}
+
+	err = kona_pwmc_config(pwm->chip, pwm, state->duty_cycle, state->period);
+	if (err && !pwm->state.enabled)
+		clk_disable_unprepare(kp->clk);
+
+	return err;
+}
+
+static const struct pwm_ops kona_pwm_ops = {
+	.apply = kona_pwmc_apply,
+	.owner = THIS_MODULE,
+};
+
+static int kona_pwmc_probe(struct platform_device *pdev)
+{
+	struct kona_pwmc *kp;
+	unsigned int chan;
+	unsigned int value = 0;
+	int ret = 0;
+
+	kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL);
+	if (kp == NULL)
+		return -ENOMEM;
+
+	kp->chip.dev = &pdev->dev;
+	kp->chip.ops = &kona_pwm_ops;
+	kp->chip.npwm = 6;
+
+	kp->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(kp->base))
+		return PTR_ERR(kp->base);
+
+	kp->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(kp->clk)) {
+		dev_err(&pdev->dev, "failed to get clock: %ld\n",
+			PTR_ERR(kp->clk));
+		return PTR_ERR(kp->clk);
+	}
+
+	ret = clk_prepare_enable(kp->clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to enable clock: %d\n", ret);
+		return ret;
+	}
+
+	/* Set push/pull for all channels */
+	for (chan = 0; chan < kp->chip.npwm; chan++)
+		value |= (1 << PWM_CONTROL_TYPE_SHIFT(chan));
+
+	writel(value, kp->base + PWM_CONTROL_OFFSET);
+
+	clk_disable_unprepare(kp->clk);
+
+	ret = devm_pwmchip_add(&pdev->dev, &kp->chip);
+	if (ret < 0)
+		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
+
+	return ret;
+}
+
+static const struct of_device_id bcm_kona_pwmc_dt[] = {
+	{ .compatible = "brcm,kona-pwm" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bcm_kona_pwmc_dt);
+
+static struct platform_driver kona_pwmc_driver = {
+	.driver = {
+		.name = "bcm-kona-pwm",
+		.of_match_table = bcm_kona_pwmc_dt,
+	},
+	.probe = kona_pwmc_probe,
+};
+module_platform_driver(kona_pwmc_driver);
+
+MODULE_AUTHOR("Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com>");
+MODULE_AUTHOR("Tim Kryger <tkryger@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom Kona PWM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-bcm2835.c b/drivers/pwm/pwm-bcm2835.c
new file mode 100644
index 000000000..50b8594be
--- /dev/null
+++ b/drivers/pwm/pwm-bcm2835.c
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2014 Bart Tanghe <bart.tanghe@thomasmore.be>
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+#define PWM_CONTROL		0x000
+#define PWM_CONTROL_SHIFT(x)	((x) * 8)
+#define PWM_CONTROL_MASK	0xff
+#define PWM_MODE		0x80		/* set timer in PWM mode */
+#define PWM_ENABLE		(1 << 0)
+#define PWM_POLARITY		(1 << 4)
+
+#define PERIOD(x)		(((x) * 0x10) + 0x10)
+#define DUTY(x)			(((x) * 0x10) + 0x14)
+
+#define PERIOD_MIN		0x2
+
+struct bcm2835_pwm {
+	struct pwm_chip chip;
+	struct device *dev;
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static inline struct bcm2835_pwm *to_bcm2835_pwm(struct pwm_chip *chip)
+{
+	return container_of(chip, struct bcm2835_pwm, chip);
+}
+
+static int bcm2835_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
+	u32 value;
+
+	value = readl(pc->base + PWM_CONTROL);
+	value &= ~(PWM_CONTROL_MASK << PWM_CONTROL_SHIFT(pwm->hwpwm));
+	value |= (PWM_MODE << PWM_CONTROL_SHIFT(pwm->hwpwm));
+	writel(value, pc->base + PWM_CONTROL);
+
+	return 0;
+}
+
+static void bcm2835_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
+	u32 value;
+
+	value = readl(pc->base + PWM_CONTROL);
+	value &= ~(PWM_CONTROL_MASK << PWM_CONTROL_SHIFT(pwm->hwpwm));
+	writel(value, pc->base + PWM_CONTROL);
+}
+
+static int bcm2835_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			     const struct pwm_state *state)
+{
+
+	struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
+	unsigned long rate = clk_get_rate(pc->clk);
+	unsigned long long period_cycles;
+	u64 max_period;
+
+	u32 val;
+
+	if (!rate) {
+		dev_err(pc->dev, "failed to get clock rate\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * period_cycles must be a 32 bit value, so period * rate / NSEC_PER_SEC
+	 * must be <= U32_MAX. As U32_MAX * NSEC_PER_SEC < U64_MAX the
+	 * multiplication period * rate doesn't overflow.
+	 * To calculate the maximal possible period that guarantees the
+	 * above inequality:
+	 *
+	 *     round(period * rate / NSEC_PER_SEC) <= U32_MAX
+	 * <=> period * rate / NSEC_PER_SEC < U32_MAX + 0.5
+	 * <=> period * rate < (U32_MAX + 0.5) * NSEC_PER_SEC
+	 * <=> period < ((U32_MAX + 0.5) * NSEC_PER_SEC) / rate
+	 * <=> period < ((U32_MAX * NSEC_PER_SEC + NSEC_PER_SEC/2) / rate
+	 * <=> period <= ceil((U32_MAX * NSEC_PER_SEC + NSEC_PER_SEC/2) / rate) - 1
+	 */
+	max_period = DIV_ROUND_UP_ULL((u64)U32_MAX * NSEC_PER_SEC + NSEC_PER_SEC / 2, rate) - 1;
+
+	if (state->period > max_period)
+		return -EINVAL;
+
+	/* set period */
+	period_cycles = DIV_ROUND_CLOSEST_ULL(state->period * rate, NSEC_PER_SEC);
+
+	/* don't accept a period that is too small */
+	if (period_cycles < PERIOD_MIN)
+		return -EINVAL;
+
+	writel(period_cycles, pc->base + PERIOD(pwm->hwpwm));
+
+	/* set duty cycle */
+	val = DIV_ROUND_CLOSEST_ULL(state->duty_cycle * rate, NSEC_PER_SEC);
+	writel(val, pc->base + DUTY(pwm->hwpwm));
+
+	/* set polarity */
+	val = readl(pc->base + PWM_CONTROL);
+
+	if (state->polarity == PWM_POLARITY_NORMAL)
+		val &= ~(PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm));
+	else
+		val |= PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm);
+
+	/* enable/disable */
+	if (state->enabled)
+		val |= PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm);
+	else
+		val &= ~(PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm));
+
+	writel(val, pc->base + PWM_CONTROL);
+
+	return 0;
+}
+
+static const struct pwm_ops bcm2835_pwm_ops = {
+	.request = bcm2835_pwm_request,
+	.free = bcm2835_pwm_free,
+	.apply = bcm2835_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static int bcm2835_pwm_probe(struct platform_device *pdev)
+{
+	struct bcm2835_pwm *pc;
+	int ret;
+
+	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
+	if (!pc)
+		return -ENOMEM;
+
+	pc->dev = &pdev->dev;
+
+	pc->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(pc->base))
+		return PTR_ERR(pc->base);
+
+	pc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pc->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(pc->clk),
+				     "clock not found\n");
+
+	ret = clk_prepare_enable(pc->clk);
+	if (ret)
+		return ret;
+
+	pc->chip.dev = &pdev->dev;
+	pc->chip.ops = &bcm2835_pwm_ops;
+	pc->chip.npwm = 2;
+
+	platform_set_drvdata(pdev, pc);
+
+	ret = pwmchip_add(&pc->chip);
+	if (ret < 0)
+		goto add_fail;
+
+	return 0;
+
+add_fail:
+	clk_disable_unprepare(pc->clk);
+	return ret;
+}
+
+static int bcm2835_pwm_remove(struct platform_device *pdev)
+{
+	struct bcm2835_pwm *pc = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&pc->chip);
+
+	clk_disable_unprepare(pc->clk);
+
+	return 0;
+}
+
+static const struct of_device_id bcm2835_pwm_of_match[] = {
+	{ .compatible = "brcm,bcm2835-pwm", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, bcm2835_pwm_of_match);
+
+static struct platform_driver bcm2835_pwm_driver = {
+	.driver = {
+		.name = "bcm2835-pwm",
+		.of_match_table = bcm2835_pwm_of_match,
+	},
+	.probe = bcm2835_pwm_probe,
+	.remove = bcm2835_pwm_remove,
+};
+module_platform_driver(bcm2835_pwm_driver);
+
+MODULE_AUTHOR("Bart Tanghe <bart.tanghe@thomasmore.be>");
+MODULE_DESCRIPTION("Broadcom BCM2835 PWM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-berlin.c b/drivers/pwm/pwm-berlin.c
new file mode 100644
index 000000000..e157273fd
--- /dev/null
+++ b/drivers/pwm/pwm-berlin.c
@@ -0,0 +1,331 @@
+/*
+ * Marvell Berlin PWM driver
+ *
+ * Copyright (C) 2015 Marvell Technology Group Ltd.
+ *
+ * Author: Antoine Tenart <antoine.tenart@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+#define BERLIN_PWM_EN			0x0
+#define  BERLIN_PWM_ENABLE		BIT(0)
+#define BERLIN_PWM_CONTROL		0x4
+/*
+ * The prescaler claims to support 8 different moduli, configured using the
+ * low three bits of PWM_CONTROL. (Sequentially, they are 1, 4, 8, 16, 64,
+ * 256, 1024, and 4096.)  However, the moduli from 4 to 1024 appear to be
+ * implemented by internally shifting TCNT left without adding additional
+ * bits. So, the max TCNT that actually works for a modulus of 4 is 0x3fff;
+ * for 8, 0x1fff; and so on. This means that those moduli are entirely
+ * useless, as we could just do the shift ourselves. The 4096 modulus is
+ * implemented with a real prescaler, so we do use that, but we treat it
+ * as a flag instead of pretending the modulus is actually configurable.
+ */
+#define  BERLIN_PWM_PRESCALE_4096	0x7
+#define  BERLIN_PWM_INVERT_POLARITY	BIT(3)
+#define BERLIN_PWM_DUTY			0x8
+#define BERLIN_PWM_TCNT			0xc
+#define  BERLIN_PWM_MAX_TCNT		65535
+
+struct berlin_pwm_channel {
+	u32 enable;
+	u32 ctrl;
+	u32 duty;
+	u32 tcnt;
+};
+
+struct berlin_pwm_chip {
+	struct pwm_chip chip;
+	struct clk *clk;
+	void __iomem *base;
+};
+
+static inline struct berlin_pwm_chip *to_berlin_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct berlin_pwm_chip, chip);
+}
+
+static inline u32 berlin_pwm_readl(struct berlin_pwm_chip *bpc,
+				   unsigned int channel, unsigned long offset)
+{
+	return readl_relaxed(bpc->base + channel * 0x10 + offset);
+}
+
+static inline void berlin_pwm_writel(struct berlin_pwm_chip *bpc,
+				     unsigned int channel, u32 value,
+				     unsigned long offset)
+{
+	writel_relaxed(value, bpc->base + channel * 0x10 + offset);
+}
+
+static int berlin_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct berlin_pwm_channel *channel;
+
+	channel = kzalloc(sizeof(*channel), GFP_KERNEL);
+	if (!channel)
+		return -ENOMEM;
+
+	return pwm_set_chip_data(pwm, channel);
+}
+
+static void berlin_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct berlin_pwm_channel *channel = pwm_get_chip_data(pwm);
+
+	kfree(channel);
+}
+
+static int berlin_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			     u64 duty_ns, u64 period_ns)
+{
+	struct berlin_pwm_chip *bpc = to_berlin_pwm_chip(chip);
+	bool prescale_4096 = false;
+	u32 value, duty, period;
+	u64 cycles;
+
+	cycles = clk_get_rate(bpc->clk);
+	cycles *= period_ns;
+	do_div(cycles, NSEC_PER_SEC);
+
+	if (cycles > BERLIN_PWM_MAX_TCNT) {
+		prescale_4096 = true;
+		cycles >>= 12; // Prescaled by 4096
+
+		if (cycles > BERLIN_PWM_MAX_TCNT)
+			return -ERANGE;
+	}
+
+	period = cycles;
+	cycles *= duty_ns;
+	do_div(cycles, period_ns);
+	duty = cycles;
+
+	value = berlin_pwm_readl(bpc, pwm->hwpwm, BERLIN_PWM_CONTROL);
+	if (prescale_4096)
+		value |= BERLIN_PWM_PRESCALE_4096;
+	else
+		value &= ~BERLIN_PWM_PRESCALE_4096;
+	berlin_pwm_writel(bpc, pwm->hwpwm, value, BERLIN_PWM_CONTROL);
+
+	berlin_pwm_writel(bpc, pwm->hwpwm, duty, BERLIN_PWM_DUTY);
+	berlin_pwm_writel(bpc, pwm->hwpwm, period, BERLIN_PWM_TCNT);
+
+	return 0;
+}
+
+static int berlin_pwm_set_polarity(struct pwm_chip *chip,
+				   struct pwm_device *pwm,
+				   enum pwm_polarity polarity)
+{
+	struct berlin_pwm_chip *bpc = to_berlin_pwm_chip(chip);
+	u32 value;
+
+	value = berlin_pwm_readl(bpc, pwm->hwpwm, BERLIN_PWM_CONTROL);
+
+	if (polarity == PWM_POLARITY_NORMAL)
+		value &= ~BERLIN_PWM_INVERT_POLARITY;
+	else
+		value |= BERLIN_PWM_INVERT_POLARITY;
+
+	berlin_pwm_writel(bpc, pwm->hwpwm, value, BERLIN_PWM_CONTROL);
+
+	return 0;
+}
+
+static int berlin_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct berlin_pwm_chip *bpc = to_berlin_pwm_chip(chip);
+	u32 value;
+
+	value = berlin_pwm_readl(bpc, pwm->hwpwm, BERLIN_PWM_EN);
+	value |= BERLIN_PWM_ENABLE;
+	berlin_pwm_writel(bpc, pwm->hwpwm, value, BERLIN_PWM_EN);
+
+	return 0;
+}
+
+static void berlin_pwm_disable(struct pwm_chip *chip,
+			       struct pwm_device *pwm)
+{
+	struct berlin_pwm_chip *bpc = to_berlin_pwm_chip(chip);
+	u32 value;
+
+	value = berlin_pwm_readl(bpc, pwm->hwpwm, BERLIN_PWM_EN);
+	value &= ~BERLIN_PWM_ENABLE;
+	berlin_pwm_writel(bpc, pwm->hwpwm, value, BERLIN_PWM_EN);
+}
+
+static int berlin_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			    const struct pwm_state *state)
+{
+	int err;
+	bool enabled = pwm->state.enabled;
+
+	if (state->polarity != pwm->state.polarity) {
+		if (enabled) {
+			berlin_pwm_disable(chip, pwm);
+			enabled = false;
+		}
+
+		err = berlin_pwm_set_polarity(chip, pwm, state->polarity);
+		if (err)
+			return err;
+	}
+
+	if (!state->enabled) {
+		if (enabled)
+			berlin_pwm_disable(chip, pwm);
+		return 0;
+	}
+
+	err = berlin_pwm_config(chip, pwm, state->duty_cycle, state->period);
+	if (err)
+		return err;
+
+	if (!enabled)
+		return berlin_pwm_enable(chip, pwm);
+
+	return 0;
+}
+
+static const struct pwm_ops berlin_pwm_ops = {
+	.request = berlin_pwm_request,
+	.free = berlin_pwm_free,
+	.apply = berlin_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static const struct of_device_id berlin_pwm_match[] = {
+	{ .compatible = "marvell,berlin-pwm" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, berlin_pwm_match);
+
+static int berlin_pwm_probe(struct platform_device *pdev)
+{
+	struct berlin_pwm_chip *bpc;
+	int ret;
+
+	bpc = devm_kzalloc(&pdev->dev, sizeof(*bpc), GFP_KERNEL);
+	if (!bpc)
+		return -ENOMEM;
+
+	bpc->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(bpc->base))
+		return PTR_ERR(bpc->base);
+
+	bpc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(bpc->clk))
+		return PTR_ERR(bpc->clk);
+
+	ret = clk_prepare_enable(bpc->clk);
+	if (ret)
+		return ret;
+
+	bpc->chip.dev = &pdev->dev;
+	bpc->chip.ops = &berlin_pwm_ops;
+	bpc->chip.npwm = 4;
+
+	ret = pwmchip_add(&bpc->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
+		clk_disable_unprepare(bpc->clk);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, bpc);
+
+	return 0;
+}
+
+static int berlin_pwm_remove(struct platform_device *pdev)
+{
+	struct berlin_pwm_chip *bpc = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&bpc->chip);
+
+	clk_disable_unprepare(bpc->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int berlin_pwm_suspend(struct device *dev)
+{
+	struct berlin_pwm_chip *bpc = dev_get_drvdata(dev);
+	unsigned int i;
+
+	for (i = 0; i < bpc->chip.npwm; i++) {
+		struct berlin_pwm_channel *channel;
+
+		channel = pwm_get_chip_data(&bpc->chip.pwms[i]);
+		if (!channel)
+			continue;
+
+		channel->enable = berlin_pwm_readl(bpc, i, BERLIN_PWM_ENABLE);
+		channel->ctrl = berlin_pwm_readl(bpc, i, BERLIN_PWM_CONTROL);
+		channel->duty = berlin_pwm_readl(bpc, i, BERLIN_PWM_DUTY);
+		channel->tcnt = berlin_pwm_readl(bpc, i, BERLIN_PWM_TCNT);
+	}
+
+	clk_disable_unprepare(bpc->clk);
+
+	return 0;
+}
+
+static int berlin_pwm_resume(struct device *dev)
+{
+	struct berlin_pwm_chip *bpc = dev_get_drvdata(dev);
+	unsigned int i;
+	int ret;
+
+	ret = clk_prepare_enable(bpc->clk);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < bpc->chip.npwm; i++) {
+		struct berlin_pwm_channel *channel;
+
+		channel = pwm_get_chip_data(&bpc->chip.pwms[i]);
+		if (!channel)
+			continue;
+
+		berlin_pwm_writel(bpc, i, channel->ctrl, BERLIN_PWM_CONTROL);
+		berlin_pwm_writel(bpc, i, channel->duty, BERLIN_PWM_DUTY);
+		berlin_pwm_writel(bpc, i, channel->tcnt, BERLIN_PWM_TCNT);
+		berlin_pwm_writel(bpc, i, channel->enable, BERLIN_PWM_ENABLE);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(berlin_pwm_pm_ops, berlin_pwm_suspend,
+			 berlin_pwm_resume);
+
+static struct platform_driver berlin_pwm_driver = {
+	.probe = berlin_pwm_probe,
+	.remove = berlin_pwm_remove,
+	.driver = {
+		.name = "berlin-pwm",
+		.of_match_table = berlin_pwm_match,
+		.pm = &berlin_pwm_pm_ops,
+	},
+};
+module_platform_driver(berlin_pwm_driver);
+
+MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>");
+MODULE_DESCRIPTION("Marvell Berlin PWM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-brcmstb.c b/drivers/pwm/pwm-brcmstb.c
new file mode 100644
index 000000000..6afd34d65
--- /dev/null
+++ b/drivers/pwm/pwm-brcmstb.c
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Broadcom BCM7038 PWM driver
+ * Author: Florian Fainelli
+ *
+ * Copyright (C) 2015 Broadcom Corporation
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/spinlock.h>
+
+#define PWM_CTRL		0x00
+#define  CTRL_START		BIT(0)
+#define  CTRL_OEB		BIT(1)
+#define  CTRL_FORCE_HIGH	BIT(2)
+#define  CTRL_OPENDRAIN		BIT(3)
+#define  CTRL_CHAN_OFFS		4
+
+#define PWM_CTRL2		0x04
+#define  CTRL2_OUT_SELECT	BIT(0)
+
+#define PWM_CH_SIZE		0x8
+
+#define PWM_CWORD_MSB(ch)	(0x08 + ((ch) * PWM_CH_SIZE))
+#define PWM_CWORD_LSB(ch)	(0x0c + ((ch) * PWM_CH_SIZE))
+
+/* Number of bits for the CWORD value */
+#define CWORD_BIT_SIZE		16
+
+/*
+ * Maximum control word value allowed when variable-frequency PWM is used as a
+ * clock for the constant-frequency PMW.
+ */
+#define CONST_VAR_F_MAX		32768
+#define CONST_VAR_F_MIN		1
+
+#define PWM_ON(ch)		(0x18 + ((ch) * PWM_CH_SIZE))
+#define  PWM_ON_MIN		1
+#define PWM_PERIOD(ch)		(0x1c + ((ch) * PWM_CH_SIZE))
+#define  PWM_PERIOD_MIN		0
+
+#define PWM_ON_PERIOD_MAX	0xff
+
+struct brcmstb_pwm {
+	void __iomem *base;
+	struct clk *clk;
+	struct pwm_chip chip;
+};
+
+static inline u32 brcmstb_pwm_readl(struct brcmstb_pwm *p,
+				    unsigned int offset)
+{
+	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
+		return __raw_readl(p->base + offset);
+	else
+		return readl_relaxed(p->base + offset);
+}
+
+static inline void brcmstb_pwm_writel(struct brcmstb_pwm *p, u32 value,
+				      unsigned int offset)
+{
+	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
+		__raw_writel(value, p->base + offset);
+	else
+		writel_relaxed(value, p->base + offset);
+}
+
+static inline struct brcmstb_pwm *to_brcmstb_pwm(struct pwm_chip *chip)
+{
+	return container_of(chip, struct brcmstb_pwm, chip);
+}
+
+/*
+ * Fv is derived from the variable frequency output. The variable frequency
+ * output is configured using this formula:
+ *
+ * W = cword, if cword < 2 ^ 15 else 16-bit 2's complement of cword
+ *
+ * Fv = W x 2 ^ -16 x 27Mhz (reference clock)
+ *
+ * The period is: (period + 1) / Fv and "on" time is on / (period + 1)
+ *
+ * The PWM core framework specifies that the "duty_ns" parameter is in fact the
+ * "on" time, so this translates directly into our HW programming here.
+ */
+static int brcmstb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			      u64 duty_ns, u64 period_ns)
+{
+	struct brcmstb_pwm *p = to_brcmstb_pwm(chip);
+	unsigned long pc, dc, cword = CONST_VAR_F_MAX;
+	unsigned int channel = pwm->hwpwm;
+	u32 value;
+
+	/*
+	 * If asking for a duty_ns equal to period_ns, we need to substract
+	 * the period value by 1 to make it shorter than the "on" time and
+	 * produce a flat 100% duty cycle signal, and max out the "on" time
+	 */
+	if (duty_ns == period_ns) {
+		dc = PWM_ON_PERIOD_MAX;
+		pc = PWM_ON_PERIOD_MAX - 1;
+		goto done;
+	}
+
+	while (1) {
+		u64 rate;
+
+		/*
+		 * Calculate the base rate from base frequency and current
+		 * cword
+		 */
+		rate = (u64)clk_get_rate(p->clk) * (u64)cword;
+		rate >>= CWORD_BIT_SIZE;
+
+		pc = mul_u64_u64_div_u64(period_ns, rate, NSEC_PER_SEC);
+		dc = mul_u64_u64_div_u64(duty_ns + 1, rate, NSEC_PER_SEC);
+
+		/*
+		 * We can be called with separate duty and period updates,
+		 * so do not reject dc == 0 right away
+		 */
+		if (pc == PWM_PERIOD_MIN || (dc < PWM_ON_MIN && duty_ns))
+			return -EINVAL;
+
+		/* We converged on a calculation */
+		if (pc <= PWM_ON_PERIOD_MAX && dc <= PWM_ON_PERIOD_MAX)
+			break;
+
+		/*
+		 * The cword needs to be a power of 2 for the variable
+		 * frequency generator to output a 50% duty cycle variable
+		 * frequency which is used as input clock to the fixed
+		 * frequency generator.
+		 */
+		cword >>= 1;
+
+		/*
+		 * Desired periods are too large, we do not have a divider
+		 * for them
+		 */
+		if (cword < CONST_VAR_F_MIN)
+			return -EINVAL;
+	}
+
+done:
+	/*
+	 * Configure the defined "cword" value to have the variable frequency
+	 * generator output a base frequency for the constant frequency
+	 * generator to derive from.
+	 */
+	brcmstb_pwm_writel(p, cword >> 8, PWM_CWORD_MSB(channel));
+	brcmstb_pwm_writel(p, cword & 0xff, PWM_CWORD_LSB(channel));
+
+	/* Select constant frequency signal output */
+	value = brcmstb_pwm_readl(p, PWM_CTRL2);
+	value |= CTRL2_OUT_SELECT << (channel * CTRL_CHAN_OFFS);
+	brcmstb_pwm_writel(p, value, PWM_CTRL2);
+
+	/* Configure on and period value */
+	brcmstb_pwm_writel(p, pc, PWM_PERIOD(channel));
+	brcmstb_pwm_writel(p, dc, PWM_ON(channel));
+
+	return 0;
+}
+
+static inline void brcmstb_pwm_enable_set(struct brcmstb_pwm *p,
+					  unsigned int channel, bool enable)
+{
+	unsigned int shift = channel * CTRL_CHAN_OFFS;
+	u32 value;
+
+	value = brcmstb_pwm_readl(p, PWM_CTRL);
+
+	if (enable) {
+		value &= ~(CTRL_OEB << shift);
+		value |= (CTRL_START | CTRL_OPENDRAIN) << shift;
+	} else {
+		value &= ~((CTRL_START | CTRL_OPENDRAIN) << shift);
+		value |= CTRL_OEB << shift;
+	}
+
+	brcmstb_pwm_writel(p, value, PWM_CTRL);
+}
+
+static int brcmstb_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			     const struct pwm_state *state)
+{
+	struct brcmstb_pwm *p = to_brcmstb_pwm(chip);
+	int err;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		if (pwm->state.enabled)
+			brcmstb_pwm_enable_set(p, pwm->hwpwm, false);
+
+		return 0;
+	}
+
+	err = brcmstb_pwm_config(chip, pwm, state->duty_cycle, state->period);
+	if (err)
+		return err;
+
+	if (!pwm->state.enabled)
+		brcmstb_pwm_enable_set(p, pwm->hwpwm, true);
+
+	return 0;
+}
+
+static const struct pwm_ops brcmstb_pwm_ops = {
+	.apply = brcmstb_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static const struct of_device_id brcmstb_pwm_of_match[] = {
+	{ .compatible = "brcm,bcm7038-pwm", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, brcmstb_pwm_of_match);
+
+static int brcmstb_pwm_probe(struct platform_device *pdev)
+{
+	struct brcmstb_pwm *p;
+	int ret;
+
+	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	p->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(p->clk)) {
+		dev_err(&pdev->dev, "failed to obtain clock\n");
+		return PTR_ERR(p->clk);
+	}
+
+	ret = clk_prepare_enable(p->clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to enable clock: %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, p);
+
+	p->chip.dev = &pdev->dev;
+	p->chip.ops = &brcmstb_pwm_ops;
+	p->chip.npwm = 2;
+
+	p->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(p->base)) {
+		ret = PTR_ERR(p->base);
+		goto out_clk;
+	}
+
+	ret = pwmchip_add(&p->chip);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
+		goto out_clk;
+	}
+
+	return 0;
+
+out_clk:
+	clk_disable_unprepare(p->clk);
+	return ret;
+}
+
+static int brcmstb_pwm_remove(struct platform_device *pdev)
+{
+	struct brcmstb_pwm *p = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&p->chip);
+	clk_disable_unprepare(p->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int brcmstb_pwm_suspend(struct device *dev)
+{
+	struct brcmstb_pwm *p = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(p->clk);
+
+	return 0;
+}
+
+static int brcmstb_pwm_resume(struct device *dev)
+{
+	struct brcmstb_pwm *p = dev_get_drvdata(dev);
+
+	clk_prepare_enable(p->clk);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(brcmstb_pwm_pm_ops, brcmstb_pwm_suspend,
+			 brcmstb_pwm_resume);
+
+static struct platform_driver brcmstb_pwm_driver = {
+	.probe = brcmstb_pwm_probe,
+	.remove = brcmstb_pwm_remove,
+	.driver = {
+		.name = "pwm-brcmstb",
+		.of_match_table = brcmstb_pwm_of_match,
+		.pm = &brcmstb_pwm_pm_ops,
+	},
+};
+module_platform_driver(brcmstb_pwm_driver);
+
+MODULE_AUTHOR("Florian Fainelli <f.fainelli@gmail.com>");
+MODULE_DESCRIPTION("Broadcom STB PWM driver");
+MODULE_ALIAS("platform:pwm-brcmstb");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-clk.c b/drivers/pwm/pwm-clk.c
new file mode 100644
index 000000000..c2a503d68
--- /dev/null
+++ b/drivers/pwm/pwm-clk.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Clock based PWM controller
+ *
+ * Copyright (c) 2021 Nikita Travkin <nikita@trvn.ru>
+ *
+ * This is an "adapter" driver that allows PWM consumers to use
+ * system clocks with duty cycle control as PWM outputs.
+ *
+ * Limitations:
+ * - Due to the fact that exact behavior depends on the underlying
+ *   clock driver, various limitations are possible.
+ * - Underlying clock may not be able to give 0% or 100% duty cycle
+ *   (constant off or on), exact behavior will depend on the clock.
+ * - When the PWM is disabled, the clock will be disabled as well,
+ *   line state will depend on the clock.
+ * - The clk API doesn't expose the necessary calls to implement
+ *   .get_state().
+ */
+
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/pwm.h>
+
+struct pwm_clk_chip {
+	struct pwm_chip chip;
+	struct clk *clk;
+	bool clk_enabled;
+};
+
+#define to_pwm_clk_chip(_chip) container_of(_chip, struct pwm_clk_chip, chip)
+
+static int pwm_clk_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			 const struct pwm_state *state)
+{
+	struct pwm_clk_chip *pcchip = to_pwm_clk_chip(chip);
+	int ret;
+	u32 rate;
+	u64 period = state->period;
+	u64 duty_cycle = state->duty_cycle;
+
+	if (!state->enabled) {
+		if (pwm->state.enabled) {
+			clk_disable(pcchip->clk);
+			pcchip->clk_enabled = false;
+		}
+		return 0;
+	} else if (!pwm->state.enabled) {
+		ret = clk_enable(pcchip->clk);
+		if (ret)
+			return ret;
+		pcchip->clk_enabled = true;
+	}
+
+	/*
+	 * We have to enable the clk before setting the rate and duty_cycle,
+	 * that however results in a window where the clk is on with a
+	 * (potentially) different setting. Also setting period and duty_cycle
+	 * are two separate calls, so that probably isn't atomic either.
+	 */
+
+	rate = DIV64_U64_ROUND_UP(NSEC_PER_SEC, period);
+	ret = clk_set_rate(pcchip->clk, rate);
+	if (ret)
+		return ret;
+
+	if (state->polarity == PWM_POLARITY_INVERSED)
+		duty_cycle = period - duty_cycle;
+
+	return clk_set_duty_cycle(pcchip->clk, duty_cycle, period);
+}
+
+static const struct pwm_ops pwm_clk_ops = {
+	.apply = pwm_clk_apply,
+	.owner = THIS_MODULE,
+};
+
+static int pwm_clk_probe(struct platform_device *pdev)
+{
+	struct pwm_clk_chip *pcchip;
+	int ret;
+
+	pcchip = devm_kzalloc(&pdev->dev, sizeof(*pcchip), GFP_KERNEL);
+	if (!pcchip)
+		return -ENOMEM;
+
+	pcchip->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pcchip->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(pcchip->clk),
+				     "Failed to get clock\n");
+
+	pcchip->chip.dev = &pdev->dev;
+	pcchip->chip.ops = &pwm_clk_ops;
+	pcchip->chip.npwm = 1;
+
+	ret = clk_prepare(pcchip->clk);
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret, "Failed to prepare clock\n");
+
+	ret = pwmchip_add(&pcchip->chip);
+	if (ret < 0) {
+		clk_unprepare(pcchip->clk);
+		return dev_err_probe(&pdev->dev, ret, "Failed to add pwm chip\n");
+	}
+
+	platform_set_drvdata(pdev, pcchip);
+	return 0;
+}
+
+static int pwm_clk_remove(struct platform_device *pdev)
+{
+	struct pwm_clk_chip *pcchip = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&pcchip->chip);
+
+	if (pcchip->clk_enabled)
+		clk_disable(pcchip->clk);
+
+	clk_unprepare(pcchip->clk);
+
+	return 0;
+}
+
+static const struct of_device_id pwm_clk_dt_ids[] = {
+	{ .compatible = "clk-pwm", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pwm_clk_dt_ids);
+
+static struct platform_driver pwm_clk_driver = {
+	.driver = {
+		.name = "pwm-clk",
+		.of_match_table = pwm_clk_dt_ids,
+	},
+	.probe = pwm_clk_probe,
+	.remove = pwm_clk_remove,
+};
+module_platform_driver(pwm_clk_driver);
+
+MODULE_ALIAS("platform:pwm-clk");
+MODULE_AUTHOR("Nikita Travkin <nikita@trvn.ru>");
+MODULE_DESCRIPTION("Clock based PWM driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-clps711x.c b/drivers/pwm/pwm-clps711x.c
new file mode 100644
index 000000000..b0d91142d
--- /dev/null
+++ b/drivers/pwm/pwm-clps711x.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Cirrus Logic CLPS711X PWM driver
+ * Author: Alexander Shiyan <shc_work@mail.ru>
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+struct clps711x_chip {
+	struct pwm_chip chip;
+	void __iomem *pmpcon;
+	struct clk *clk;
+	spinlock_t lock;
+};
+
+static inline struct clps711x_chip *to_clps711x_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct clps711x_chip, chip);
+}
+
+static int clps711x_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct clps711x_chip *priv = to_clps711x_chip(chip);
+	unsigned int freq = clk_get_rate(priv->clk);
+
+	if (!freq)
+		return -EINVAL;
+
+	/* Store constant period value */
+	pwm->args.period = DIV_ROUND_CLOSEST(NSEC_PER_SEC, freq);
+
+	return 0;
+}
+
+static int clps711x_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			      const struct pwm_state *state)
+{
+	struct clps711x_chip *priv = to_clps711x_chip(chip);
+	/* PWM0 - bits 4..7, PWM1 - bits 8..11 */
+	u32 shift = (pwm->hwpwm + 1) * 4;
+	unsigned long flags;
+	u32 pmpcon, val;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (state->period != pwm->args.period)
+		return -EINVAL;
+
+	if (state->enabled)
+		val = mul_u64_u64_div_u64(state->duty_cycle, 0xf, state->period);
+	else
+		val = 0;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	pmpcon = readl(priv->pmpcon);
+	pmpcon &= ~(0xf << shift);
+	pmpcon |= val << shift;
+	writel(pmpcon, priv->pmpcon);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static const struct pwm_ops clps711x_pwm_ops = {
+	.request = clps711x_pwm_request,
+	.apply = clps711x_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static struct pwm_device *clps711x_pwm_xlate(struct pwm_chip *chip,
+					     const struct of_phandle_args *args)
+{
+	if (args->args[0] >= chip->npwm)
+		return ERR_PTR(-EINVAL);
+
+	return pwm_request_from_chip(chip, args->args[0], NULL);
+}
+
+static int clps711x_pwm_probe(struct platform_device *pdev)
+{
+	struct clps711x_chip *priv;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->pmpcon = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->pmpcon))
+		return PTR_ERR(priv->pmpcon);
+
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
+	priv->chip.ops = &clps711x_pwm_ops;
+	priv->chip.dev = &pdev->dev;
+	priv->chip.npwm = 2;
+	priv->chip.of_xlate = clps711x_pwm_xlate;
+	priv->chip.of_pwm_n_cells = 1;
+
+	spin_lock_init(&priv->lock);
+
+	return devm_pwmchip_add(&pdev->dev, &priv->chip);
+}
+
+static const struct of_device_id __maybe_unused clps711x_pwm_dt_ids[] = {
+	{ .compatible = "cirrus,ep7209-pwm", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, clps711x_pwm_dt_ids);
+
+static struct platform_driver clps711x_pwm_driver = {
+	.driver = {
+		.name = "clps711x-pwm",
+		.of_match_table = of_match_ptr(clps711x_pwm_dt_ids),
+	},
+	.probe = clps711x_pwm_probe,
+};
+module_platform_driver(clps711x_pwm_driver);
+
+MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
+MODULE_DESCRIPTION("Cirrus Logic CLPS711X PWM driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-crc.c b/drivers/pwm/pwm-crc.c
new file mode 100644
index 000000000..409985011
--- /dev/null
+++ b/drivers/pwm/pwm-crc.c
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Intel Corporation. All rights reserved.
+ *
+ * Author: Shobhit Kumar <shobhit.kumar@intel.com>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/pwm.h>
+
+#define PWM0_CLK_DIV		0x4B
+#define  PWM_OUTPUT_ENABLE	BIT(7)
+#define  PWM_DIV_CLK_0		0x00 /* DIVIDECLK = BASECLK */
+#define  PWM_DIV_CLK_100	0x63 /* DIVIDECLK = BASECLK/100 */
+#define  PWM_DIV_CLK_128	0x7F /* DIVIDECLK = BASECLK/128 */
+
+#define PWM0_DUTY_CYCLE		0x4E
+#define BACKLIGHT_EN		0x51
+
+#define PWM_MAX_LEVEL		0xFF
+
+#define PWM_BASE_CLK_MHZ	6	/* 6 MHz */
+#define PWM_MAX_PERIOD_NS	5461334	/* 183 Hz */
+
+/**
+ * struct crystalcove_pwm - Crystal Cove PWM controller
+ * @chip: the abstract pwm_chip structure.
+ * @regmap: the regmap from the parent device.
+ */
+struct crystalcove_pwm {
+	struct pwm_chip chip;
+	struct regmap *regmap;
+};
+
+static inline struct crystalcove_pwm *to_crc_pwm(struct pwm_chip *pc)
+{
+	return container_of(pc, struct crystalcove_pwm, chip);
+}
+
+static int crc_pwm_calc_clk_div(int period_ns)
+{
+	int clk_div;
+
+	clk_div = PWM_BASE_CLK_MHZ * period_ns / (256 * NSEC_PER_USEC);
+	/* clk_div 1 - 128, maps to register values 0-127 */
+	if (clk_div > 0)
+		clk_div--;
+
+	return clk_div;
+}
+
+static int crc_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			 const struct pwm_state *state)
+{
+	struct crystalcove_pwm *crc_pwm = to_crc_pwm(chip);
+	struct device *dev = crc_pwm->chip.dev;
+	int err;
+
+	if (state->period > PWM_MAX_PERIOD_NS) {
+		dev_err(dev, "un-supported period_ns\n");
+		return -EINVAL;
+	}
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (pwm_is_enabled(pwm) && !state->enabled) {
+		err = regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 0);
+		if (err) {
+			dev_err(dev, "Error writing BACKLIGHT_EN %d\n", err);
+			return err;
+		}
+	}
+
+	if (pwm_get_duty_cycle(pwm) != state->duty_cycle ||
+	    pwm_get_period(pwm) != state->period) {
+		u64 level = state->duty_cycle * PWM_MAX_LEVEL;
+
+		do_div(level, state->period);
+
+		err = regmap_write(crc_pwm->regmap, PWM0_DUTY_CYCLE, level);
+		if (err) {
+			dev_err(dev, "Error writing PWM0_DUTY_CYCLE %d\n", err);
+			return err;
+		}
+	}
+
+	if (pwm_is_enabled(pwm) && state->enabled &&
+	    pwm_get_period(pwm) != state->period) {
+		/* changing the clk divisor, clear PWM_OUTPUT_ENABLE first */
+		err = regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, 0);
+		if (err) {
+			dev_err(dev, "Error writing PWM0_CLK_DIV %d\n", err);
+			return err;
+		}
+	}
+
+	if (pwm_get_period(pwm) != state->period ||
+	    pwm_is_enabled(pwm) != state->enabled) {
+		int clk_div = crc_pwm_calc_clk_div(state->period);
+		int pwm_output_enable = state->enabled ? PWM_OUTPUT_ENABLE : 0;
+
+		err = regmap_write(crc_pwm->regmap, PWM0_CLK_DIV,
+				   clk_div | pwm_output_enable);
+		if (err) {
+			dev_err(dev, "Error writing PWM0_CLK_DIV %d\n", err);
+			return err;
+		}
+	}
+
+	if (!pwm_is_enabled(pwm) && state->enabled) {
+		err = regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 1);
+		if (err) {
+			dev_err(dev, "Error writing BACKLIGHT_EN %d\n", err);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static int crc_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+			     struct pwm_state *state)
+{
+	struct crystalcove_pwm *crc_pwm = to_crc_pwm(chip);
+	struct device *dev = crc_pwm->chip.dev;
+	unsigned int clk_div, clk_div_reg, duty_cycle_reg;
+	int error;
+
+	error = regmap_read(crc_pwm->regmap, PWM0_CLK_DIV, &clk_div_reg);
+	if (error) {
+		dev_err(dev, "Error reading PWM0_CLK_DIV %d\n", error);
+		return 0;
+	}
+
+	error = regmap_read(crc_pwm->regmap, PWM0_DUTY_CYCLE, &duty_cycle_reg);
+	if (error) {
+		dev_err(dev, "Error reading PWM0_DUTY_CYCLE %d\n", error);
+		return 0;
+	}
+
+	clk_div = (clk_div_reg & ~PWM_OUTPUT_ENABLE) + 1;
+
+	state->period =
+		DIV_ROUND_UP(clk_div * NSEC_PER_USEC * 256, PWM_BASE_CLK_MHZ);
+	state->duty_cycle =
+		DIV_ROUND_UP_ULL(duty_cycle_reg * state->period, PWM_MAX_LEVEL);
+	state->polarity = PWM_POLARITY_NORMAL;
+	state->enabled = !!(clk_div_reg & PWM_OUTPUT_ENABLE);
+
+	return 0;
+}
+
+static const struct pwm_ops crc_pwm_ops = {
+	.apply = crc_pwm_apply,
+	.get_state = crc_pwm_get_state,
+};
+
+static int crystalcove_pwm_probe(struct platform_device *pdev)
+{
+	struct crystalcove_pwm *pwm;
+	struct device *dev = pdev->dev.parent;
+	struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
+
+	pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
+	if (!pwm)
+		return -ENOMEM;
+
+	pwm->chip.dev = &pdev->dev;
+	pwm->chip.ops = &crc_pwm_ops;
+	pwm->chip.npwm = 1;
+
+	/* get the PMIC regmap */
+	pwm->regmap = pmic->regmap;
+
+	return devm_pwmchip_add(&pdev->dev, &pwm->chip);
+}
+
+static struct platform_driver crystalcove_pwm_driver = {
+	.probe = crystalcove_pwm_probe,
+	.driver = {
+		.name = "crystal_cove_pwm",
+	},
+};
+
+builtin_platform_driver(crystalcove_pwm_driver);
diff --git a/drivers/pwm/pwm-cros-ec.c b/drivers/pwm/pwm-cros-ec.c
new file mode 100644
index 000000000..e55bc36ed
--- /dev/null
+++ b/drivers/pwm/pwm-cros-ec.c
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Expose a PWM controlled by the ChromeOS EC to the host processor.
+ *
+ * Copyright (C) 2016 Google, Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/mfd/cros_ec.h>
+
+/**
+ * struct cros_ec_pwm_device - Driver data for EC PWM
+ *
+ * @dev: Device node
+ * @ec: Pointer to EC device
+ * @chip: PWM controller chip
+ * @use_pwm_type: Use PWM types instead of generic channels
+ */
+struct cros_ec_pwm_device {
+	struct device *dev;
+	struct cros_ec_device *ec;
+	struct pwm_chip chip;
+	bool use_pwm_type;
+};
+
+/**
+ * struct cros_ec_pwm - per-PWM driver data
+ * @duty_cycle: cached duty cycle
+ */
+struct cros_ec_pwm {
+	u16 duty_cycle;
+};
+
+static inline struct cros_ec_pwm_device *pwm_to_cros_ec_pwm(struct pwm_chip *c)
+{
+	return container_of(c, struct cros_ec_pwm_device, chip);
+}
+
+static int cros_ec_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct cros_ec_pwm *channel;
+
+	channel = kzalloc(sizeof(*channel), GFP_KERNEL);
+	if (!channel)
+		return -ENOMEM;
+
+	pwm_set_chip_data(pwm, channel);
+
+	return 0;
+}
+
+static void cros_ec_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct cros_ec_pwm *channel = pwm_get_chip_data(pwm);
+
+	kfree(channel);
+}
+
+static int cros_ec_dt_type_to_pwm_type(u8 dt_index, u8 *pwm_type)
+{
+	switch (dt_index) {
+	case CROS_EC_PWM_DT_KB_LIGHT:
+		*pwm_type = EC_PWM_TYPE_KB_LIGHT;
+		return 0;
+	case CROS_EC_PWM_DT_DISPLAY_LIGHT:
+		*pwm_type = EC_PWM_TYPE_DISPLAY_LIGHT;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int cros_ec_pwm_set_duty(struct cros_ec_pwm_device *ec_pwm, u8 index,
+				u16 duty)
+{
+	struct cros_ec_device *ec = ec_pwm->ec;
+	struct {
+		struct cros_ec_command msg;
+		struct ec_params_pwm_set_duty params;
+	} __packed buf;
+	struct ec_params_pwm_set_duty *params = &buf.params;
+	struct cros_ec_command *msg = &buf.msg;
+	int ret;
+
+	memset(&buf, 0, sizeof(buf));
+
+	msg->version = 0;
+	msg->command = EC_CMD_PWM_SET_DUTY;
+	msg->insize = 0;
+	msg->outsize = sizeof(*params);
+
+	params->duty = duty;
+
+	if (ec_pwm->use_pwm_type) {
+		ret = cros_ec_dt_type_to_pwm_type(index, &params->pwm_type);
+		if (ret) {
+			dev_err(ec->dev, "Invalid PWM type index: %d\n", index);
+			return ret;
+		}
+		params->index = 0;
+	} else {
+		params->pwm_type = EC_PWM_TYPE_GENERIC;
+		params->index = index;
+	}
+
+	return cros_ec_cmd_xfer_status(ec, msg);
+}
+
+static int cros_ec_pwm_get_duty(struct cros_ec_pwm_device *ec_pwm, u8 index)
+{
+	struct cros_ec_device *ec = ec_pwm->ec;
+	struct {
+		struct cros_ec_command msg;
+		union {
+			struct ec_params_pwm_get_duty params;
+			struct ec_response_pwm_get_duty resp;
+		};
+	} __packed buf;
+	struct ec_params_pwm_get_duty *params = &buf.params;
+	struct ec_response_pwm_get_duty *resp = &buf.resp;
+	struct cros_ec_command *msg = &buf.msg;
+	int ret;
+
+	memset(&buf, 0, sizeof(buf));
+
+	msg->version = 0;
+	msg->command = EC_CMD_PWM_GET_DUTY;
+	msg->insize = sizeof(*resp);
+	msg->outsize = sizeof(*params);
+
+	if (ec_pwm->use_pwm_type) {
+		ret = cros_ec_dt_type_to_pwm_type(index, &params->pwm_type);
+		if (ret) {
+			dev_err(ec->dev, "Invalid PWM type index: %d\n", index);
+			return ret;
+		}
+		params->index = 0;
+	} else {
+		params->pwm_type = EC_PWM_TYPE_GENERIC;
+		params->index = index;
+	}
+
+	ret = cros_ec_cmd_xfer_status(ec, msg);
+	if (ret < 0)
+		return ret;
+
+	return resp->duty;
+}
+
+static int cros_ec_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			     const struct pwm_state *state)
+{
+	struct cros_ec_pwm_device *ec_pwm = pwm_to_cros_ec_pwm(chip);
+	struct cros_ec_pwm *channel = pwm_get_chip_data(pwm);
+	u16 duty_cycle;
+	int ret;
+
+	/* The EC won't let us change the period */
+	if (state->period != EC_PWM_MAX_DUTY)
+		return -EINVAL;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	/*
+	 * EC doesn't separate the concept of duty cycle and enabled, but
+	 * kernel does. Translate.
+	 */
+	duty_cycle = state->enabled ? state->duty_cycle : 0;
+
+	ret = cros_ec_pwm_set_duty(ec_pwm, pwm->hwpwm, duty_cycle);
+	if (ret < 0)
+		return ret;
+
+	channel->duty_cycle = state->duty_cycle;
+
+	return 0;
+}
+
+static int cros_ec_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+				 struct pwm_state *state)
+{
+	struct cros_ec_pwm_device *ec_pwm = pwm_to_cros_ec_pwm(chip);
+	struct cros_ec_pwm *channel = pwm_get_chip_data(pwm);
+	int ret;
+
+	ret = cros_ec_pwm_get_duty(ec_pwm, pwm->hwpwm);
+	if (ret < 0) {
+		dev_err(chip->dev, "error getting initial duty: %d\n", ret);
+		return 0;
+	}
+
+	state->enabled = (ret > 0);
+	state->period = EC_PWM_MAX_DUTY;
+	state->polarity = PWM_POLARITY_NORMAL;
+
+	/*
+	 * Note that "disabled" and "duty cycle == 0" are treated the same. If
+	 * the cached duty cycle is not zero, used the cached duty cycle. This
+	 * ensures that the configured duty cycle is kept across a disable and
+	 * enable operation and avoids potentially confusing consumers.
+	 *
+	 * For the case of the initial hardware readout, channel->duty_cycle
+	 * will be 0 and the actual duty cycle read from the EC is used.
+	 */
+	if (ret == 0 && channel->duty_cycle > 0)
+		state->duty_cycle = channel->duty_cycle;
+	else
+		state->duty_cycle = ret;
+
+	return 0;
+}
+
+static struct pwm_device *
+cros_ec_pwm_xlate(struct pwm_chip *pc, const struct of_phandle_args *args)
+{
+	struct pwm_device *pwm;
+
+	if (args->args[0] >= pc->npwm)
+		return ERR_PTR(-EINVAL);
+
+	pwm = pwm_request_from_chip(pc, args->args[0], NULL);
+	if (IS_ERR(pwm))
+		return pwm;
+
+	/* The EC won't let us change the period */
+	pwm->args.period = EC_PWM_MAX_DUTY;
+
+	return pwm;
+}
+
+static const struct pwm_ops cros_ec_pwm_ops = {
+	.request = cros_ec_pwm_request,
+	.free = cros_ec_pwm_free,
+	.get_state	= cros_ec_pwm_get_state,
+	.apply		= cros_ec_pwm_apply,
+	.owner		= THIS_MODULE,
+};
+
+/*
+ * Determine the number of supported PWMs. The EC does not return the number
+ * of PWMs it supports directly, so we have to read the pwm duty cycle for
+ * subsequent channels until we get an error.
+ */
+static int cros_ec_num_pwms(struct cros_ec_pwm_device *ec_pwm)
+{
+	int i, ret;
+
+	/* The index field is only 8 bits */
+	for (i = 0; i <= U8_MAX; i++) {
+		ret = cros_ec_pwm_get_duty(ec_pwm, i);
+		/*
+		 * We look for SUCCESS, INVALID_COMMAND, or INVALID_PARAM
+		 * responses; everything else is treated as an error.
+		 * The EC error codes map to -EOPNOTSUPP and -EINVAL,
+		 * so check for those.
+		 */
+		switch (ret) {
+		case -EOPNOTSUPP:	/* invalid command */
+			return -ENODEV;
+		case -EINVAL:		/* invalid parameter */
+			return i;
+		default:
+			if (ret < 0)
+				return ret;
+			break;
+		}
+	}
+
+	return U8_MAX;
+}
+
+static int cros_ec_pwm_probe(struct platform_device *pdev)
+{
+	struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
+	struct device *dev = &pdev->dev;
+	struct device_node *np = pdev->dev.of_node;
+	struct cros_ec_pwm_device *ec_pwm;
+	struct pwm_chip *chip;
+	int ret;
+
+	if (!ec) {
+		dev_err(dev, "no parent EC device\n");
+		return -EINVAL;
+	}
+
+	ec_pwm = devm_kzalloc(dev, sizeof(*ec_pwm), GFP_KERNEL);
+	if (!ec_pwm)
+		return -ENOMEM;
+	chip = &ec_pwm->chip;
+	ec_pwm->ec = ec;
+
+	if (of_device_is_compatible(np, "google,cros-ec-pwm-type"))
+		ec_pwm->use_pwm_type = true;
+
+	/* PWM chip */
+	chip->dev = dev;
+	chip->ops = &cros_ec_pwm_ops;
+	chip->of_xlate = cros_ec_pwm_xlate;
+	chip->of_pwm_n_cells = 1;
+
+	if (ec_pwm->use_pwm_type) {
+		chip->npwm = CROS_EC_PWM_DT_COUNT;
+	} else {
+		ret = cros_ec_num_pwms(ec_pwm);
+		if (ret < 0) {
+			dev_err(dev, "Couldn't find PWMs: %d\n", ret);
+			return ret;
+		}
+		chip->npwm = ret;
+	}
+
+	dev_dbg(dev, "Probed %u PWMs\n", chip->npwm);
+
+	ret = pwmchip_add(chip);
+	if (ret < 0) {
+		dev_err(dev, "cannot register PWM: %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, ec_pwm);
+
+	return ret;
+}
+
+static int cros_ec_pwm_remove(struct platform_device *dev)
+{
+	struct cros_ec_pwm_device *ec_pwm = platform_get_drvdata(dev);
+	struct pwm_chip *chip = &ec_pwm->chip;
+
+	pwmchip_remove(chip);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id cros_ec_pwm_of_match[] = {
+	{ .compatible = "google,cros-ec-pwm" },
+	{ .compatible = "google,cros-ec-pwm-type" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, cros_ec_pwm_of_match);
+#endif
+
+static struct platform_driver cros_ec_pwm_driver = {
+	.probe = cros_ec_pwm_probe,
+	.remove = cros_ec_pwm_remove,
+	.driver = {
+		.name = "cros-ec-pwm",
+		.of_match_table = of_match_ptr(cros_ec_pwm_of_match),
+	},
+};
+module_platform_driver(cros_ec_pwm_driver);
+
+MODULE_ALIAS("platform:cros-ec-pwm");
+MODULE_DESCRIPTION("ChromeOS EC PWM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-dwc.c b/drivers/pwm/pwm-dwc.c
new file mode 100644
index 000000000..bd2308812
--- /dev/null
+++ b/drivers/pwm/pwm-dwc.c
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DesignWare PWM Controller driver
+ *
+ * Copyright (C) 2018-2020 Intel Corporation
+ *
+ * Author: Felipe Balbi (Intel)
+ * Author: Jarkko Nikula <jarkko.nikula@linux.intel.com>
+ * Author: Raymond Tan <raymond.tan@intel.com>
+ *
+ * Limitations:
+ * - The hardware cannot generate a 0 % or 100 % duty cycle. Both high and low
+ *   periods are one or more input clock periods long.
+ */
+
+#include <linux/bitops.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pm_runtime.h>
+#include <linux/pwm.h>
+
+#define DWC_TIM_LD_CNT(n)	((n) * 0x14)
+#define DWC_TIM_LD_CNT2(n)	(((n) * 4) + 0xb0)
+#define DWC_TIM_CUR_VAL(n)	(((n) * 0x14) + 0x04)
+#define DWC_TIM_CTRL(n)		(((n) * 0x14) + 0x08)
+#define DWC_TIM_EOI(n)		(((n) * 0x14) + 0x0c)
+#define DWC_TIM_INT_STS(n)	(((n) * 0x14) + 0x10)
+
+#define DWC_TIMERS_INT_STS	0xa0
+#define DWC_TIMERS_EOI		0xa4
+#define DWC_TIMERS_RAW_INT_STS	0xa8
+#define DWC_TIMERS_COMP_VERSION	0xac
+
+#define DWC_TIMERS_TOTAL	8
+#define DWC_CLK_PERIOD_NS	10
+
+/* Timer Control Register */
+#define DWC_TIM_CTRL_EN		BIT(0)
+#define DWC_TIM_CTRL_MODE	BIT(1)
+#define DWC_TIM_CTRL_MODE_FREE	(0 << 1)
+#define DWC_TIM_CTRL_MODE_USER	(1 << 1)
+#define DWC_TIM_CTRL_INT_MASK	BIT(2)
+#define DWC_TIM_CTRL_PWM	BIT(3)
+
+struct dwc_pwm_ctx {
+	u32 cnt;
+	u32 cnt2;
+	u32 ctrl;
+};
+
+struct dwc_pwm {
+	struct pwm_chip chip;
+	void __iomem *base;
+	struct dwc_pwm_ctx ctx[DWC_TIMERS_TOTAL];
+};
+#define to_dwc_pwm(p)	(container_of((p), struct dwc_pwm, chip))
+
+static inline u32 dwc_pwm_readl(struct dwc_pwm *dwc, u32 offset)
+{
+	return readl(dwc->base + offset);
+}
+
+static inline void dwc_pwm_writel(struct dwc_pwm *dwc, u32 value, u32 offset)
+{
+	writel(value, dwc->base + offset);
+}
+
+static void __dwc_pwm_set_enable(struct dwc_pwm *dwc, int pwm, int enabled)
+{
+	u32 reg;
+
+	reg = dwc_pwm_readl(dwc, DWC_TIM_CTRL(pwm));
+
+	if (enabled)
+		reg |= DWC_TIM_CTRL_EN;
+	else
+		reg &= ~DWC_TIM_CTRL_EN;
+
+	dwc_pwm_writel(dwc, reg, DWC_TIM_CTRL(pwm));
+}
+
+static int __dwc_pwm_configure_timer(struct dwc_pwm *dwc,
+				     struct pwm_device *pwm,
+				     const struct pwm_state *state)
+{
+	u64 tmp;
+	u32 ctrl;
+	u32 high;
+	u32 low;
+
+	/*
+	 * Calculate width of low and high period in terms of input clock
+	 * periods and check are the result within HW limits between 1 and
+	 * 2^32 periods.
+	 */
+	tmp = DIV_ROUND_CLOSEST_ULL(state->duty_cycle, DWC_CLK_PERIOD_NS);
+	if (tmp < 1 || tmp > (1ULL << 32))
+		return -ERANGE;
+	low = tmp - 1;
+
+	tmp = DIV_ROUND_CLOSEST_ULL(state->period - state->duty_cycle,
+				    DWC_CLK_PERIOD_NS);
+	if (tmp < 1 || tmp > (1ULL << 32))
+		return -ERANGE;
+	high = tmp - 1;
+
+	/*
+	 * Specification says timer usage flow is to disable timer, then
+	 * program it followed by enable. It also says Load Count is loaded
+	 * into timer after it is enabled - either after a disable or
+	 * a reset. Based on measurements it happens also without disable
+	 * whenever Load Count is updated. But follow the specification.
+	 */
+	__dwc_pwm_set_enable(dwc, pwm->hwpwm, false);
+
+	/*
+	 * Write Load Count and Load Count 2 registers. Former defines the
+	 * width of low period and latter the width of high period in terms
+	 * multiple of input clock periods:
+	 * Width = ((Count + 1) * input clock period).
+	 */
+	dwc_pwm_writel(dwc, low, DWC_TIM_LD_CNT(pwm->hwpwm));
+	dwc_pwm_writel(dwc, high, DWC_TIM_LD_CNT2(pwm->hwpwm));
+
+	/*
+	 * Set user-defined mode, timer reloads from Load Count registers
+	 * when it counts down to 0.
+	 * Set PWM mode, it makes output to toggle and width of low and high
+	 * periods are set by Load Count registers.
+	 */
+	ctrl = DWC_TIM_CTRL_MODE_USER | DWC_TIM_CTRL_PWM;
+	dwc_pwm_writel(dwc, ctrl, DWC_TIM_CTRL(pwm->hwpwm));
+
+	/*
+	 * Enable timer. Output starts from low period.
+	 */
+	__dwc_pwm_set_enable(dwc, pwm->hwpwm, state->enabled);
+
+	return 0;
+}
+
+static int dwc_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			 const struct pwm_state *state)
+{
+	struct dwc_pwm *dwc = to_dwc_pwm(chip);
+
+	if (state->polarity != PWM_POLARITY_INVERSED)
+		return -EINVAL;
+
+	if (state->enabled) {
+		if (!pwm->state.enabled)
+			pm_runtime_get_sync(chip->dev);
+		return __dwc_pwm_configure_timer(dwc, pwm, state);
+	} else {
+		if (pwm->state.enabled) {
+			__dwc_pwm_set_enable(dwc, pwm->hwpwm, false);
+			pm_runtime_put_sync(chip->dev);
+		}
+	}
+
+	return 0;
+}
+
+static int dwc_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+			     struct pwm_state *state)
+{
+	struct dwc_pwm *dwc = to_dwc_pwm(chip);
+	u64 duty, period;
+
+	pm_runtime_get_sync(chip->dev);
+
+	state->enabled = !!(dwc_pwm_readl(dwc,
+				DWC_TIM_CTRL(pwm->hwpwm)) & DWC_TIM_CTRL_EN);
+
+	duty = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT(pwm->hwpwm));
+	duty += 1;
+	duty *= DWC_CLK_PERIOD_NS;
+	state->duty_cycle = duty;
+
+	period = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT2(pwm->hwpwm));
+	period += 1;
+	period *= DWC_CLK_PERIOD_NS;
+	period += duty;
+	state->period = period;
+
+	state->polarity = PWM_POLARITY_INVERSED;
+
+	pm_runtime_put_sync(chip->dev);
+
+	return 0;
+}
+
+static const struct pwm_ops dwc_pwm_ops = {
+	.apply = dwc_pwm_apply,
+	.get_state = dwc_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static int dwc_pwm_probe(struct pci_dev *pci, const struct pci_device_id *id)
+{
+	struct device *dev = &pci->dev;
+	struct dwc_pwm *dwc;
+	int ret;
+
+	dwc = devm_kzalloc(&pci->dev, sizeof(*dwc), GFP_KERNEL);
+	if (!dwc)
+		return -ENOMEM;
+
+	ret = pcim_enable_device(pci);
+	if (ret) {
+		dev_err(&pci->dev,
+			"Failed to enable device (%pe)\n", ERR_PTR(ret));
+		return ret;
+	}
+
+	pci_set_master(pci);
+
+	ret = pcim_iomap_regions(pci, BIT(0), pci_name(pci));
+	if (ret) {
+		dev_err(&pci->dev,
+			"Failed to iomap PCI BAR (%pe)\n", ERR_PTR(ret));
+		return ret;
+	}
+
+	dwc->base = pcim_iomap_table(pci)[0];
+	if (!dwc->base) {
+		dev_err(&pci->dev, "Base address missing\n");
+		return -ENOMEM;
+	}
+
+	pci_set_drvdata(pci, dwc);
+
+	dwc->chip.dev = dev;
+	dwc->chip.ops = &dwc_pwm_ops;
+	dwc->chip.npwm = DWC_TIMERS_TOTAL;
+
+	ret = pwmchip_add(&dwc->chip);
+	if (ret)
+		return ret;
+
+	pm_runtime_put(dev);
+	pm_runtime_allow(dev);
+
+	return 0;
+}
+
+static void dwc_pwm_remove(struct pci_dev *pci)
+{
+	struct dwc_pwm *dwc = pci_get_drvdata(pci);
+
+	pm_runtime_forbid(&pci->dev);
+	pm_runtime_get_noresume(&pci->dev);
+
+	pwmchip_remove(&dwc->chip);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int dwc_pwm_suspend(struct device *dev)
+{
+	struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+	struct dwc_pwm *dwc = pci_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < DWC_TIMERS_TOTAL; i++) {
+		if (dwc->chip.pwms[i].state.enabled) {
+			dev_err(dev, "PWM %u in use by consumer (%s)\n",
+				i, dwc->chip.pwms[i].label);
+			return -EBUSY;
+		}
+		dwc->ctx[i].cnt = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT(i));
+		dwc->ctx[i].cnt2 = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT2(i));
+		dwc->ctx[i].ctrl = dwc_pwm_readl(dwc, DWC_TIM_CTRL(i));
+	}
+
+	return 0;
+}
+
+static int dwc_pwm_resume(struct device *dev)
+{
+	struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+	struct dwc_pwm *dwc = pci_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < DWC_TIMERS_TOTAL; i++) {
+		dwc_pwm_writel(dwc, dwc->ctx[i].cnt, DWC_TIM_LD_CNT(i));
+		dwc_pwm_writel(dwc, dwc->ctx[i].cnt2, DWC_TIM_LD_CNT2(i));
+		dwc_pwm_writel(dwc, dwc->ctx[i].ctrl, DWC_TIM_CTRL(i));
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(dwc_pwm_pm_ops, dwc_pwm_suspend, dwc_pwm_resume);
+
+static const struct pci_device_id dwc_pwm_id_table[] = {
+	{ PCI_VDEVICE(INTEL, 0x4bb7) }, /* Elkhart Lake */
+	{  }	/* Terminating Entry */
+};
+MODULE_DEVICE_TABLE(pci, dwc_pwm_id_table);
+
+static struct pci_driver dwc_pwm_driver = {
+	.name = "pwm-dwc",
+	.probe = dwc_pwm_probe,
+	.remove = dwc_pwm_remove,
+	.id_table = dwc_pwm_id_table,
+	.driver = {
+		.pm = &dwc_pwm_pm_ops,
+	},
+};
+
+module_pci_driver(dwc_pwm_driver);
+
+MODULE_AUTHOR("Felipe Balbi (Intel)");
+MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@linux.intel.com>");
+MODULE_AUTHOR("Raymond Tan <raymond.tan@intel.com>");
+MODULE_DESCRIPTION("DesignWare PWM Controller");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-ep93xx.c b/drivers/pwm/pwm-ep93xx.c
new file mode 100644
index 000000000..c45a75e65
--- /dev/null
+++ b/drivers/pwm/pwm-ep93xx.c
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * PWM framework driver for Cirrus Logic EP93xx
+ *
+ * Copyright (c) 2009        Matthieu Crapet <mcrapet@gmail.com>
+ * Copyright (c) 2009, 2013  H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * EP9301/02 have only one channel:
+ *   platform device ep93xx-pwm.1 - PWMOUT1 (EGPIO14)
+ *
+ * EP9307 has only one channel:
+ *   platform device ep93xx-pwm.0 - PWMOUT
+ *
+ * EP9312/15 have two channels:
+ *   platform device ep93xx-pwm.0 - PWMOUT
+ *   platform device ep93xx-pwm.1 - PWMOUT1 (EGPIO14)
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <asm/div64.h>
+
+#include <linux/soc/cirrus/ep93xx.h>	/* for ep93xx_pwm_{acquire,release}_gpio() */
+
+#define EP93XX_PWMx_TERM_COUNT	0x00
+#define EP93XX_PWMx_DUTY_CYCLE	0x04
+#define EP93XX_PWMx_ENABLE	0x08
+#define EP93XX_PWMx_INVERT	0x0c
+
+struct ep93xx_pwm {
+	void __iomem *base;
+	struct clk *clk;
+	struct pwm_chip chip;
+};
+
+static inline struct ep93xx_pwm *to_ep93xx_pwm(struct pwm_chip *chip)
+{
+	return container_of(chip, struct ep93xx_pwm, chip);
+}
+
+static int ep93xx_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct platform_device *pdev = to_platform_device(chip->dev);
+
+	return ep93xx_pwm_acquire_gpio(pdev);
+}
+
+static void ep93xx_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct platform_device *pdev = to_platform_device(chip->dev);
+
+	ep93xx_pwm_release_gpio(pdev);
+}
+
+static int ep93xx_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			    const struct pwm_state *state)
+{
+	int ret;
+	struct ep93xx_pwm *ep93xx_pwm = to_ep93xx_pwm(chip);
+	bool enabled = state->enabled;
+	void __iomem *base = ep93xx_pwm->base;
+	unsigned long long c;
+	unsigned long period_cycles;
+	unsigned long duty_cycles;
+	unsigned long term;
+
+	if (state->polarity != pwm->state.polarity) {
+		if (enabled) {
+			writew(0x0, ep93xx_pwm->base + EP93XX_PWMx_ENABLE);
+			clk_disable_unprepare(ep93xx_pwm->clk);
+			enabled = false;
+		}
+
+		/*
+		 * The clock needs to be enabled to access the PWM registers.
+		 * Polarity can only be changed when the PWM is disabled.
+		 */
+		ret = clk_prepare_enable(ep93xx_pwm->clk);
+		if (ret)
+			return ret;
+
+		if (state->polarity == PWM_POLARITY_INVERSED)
+			writew(0x1, ep93xx_pwm->base + EP93XX_PWMx_INVERT);
+		else
+			writew(0x0, ep93xx_pwm->base + EP93XX_PWMx_INVERT);
+
+		clk_disable_unprepare(ep93xx_pwm->clk);
+	}
+
+	if (!state->enabled) {
+		if (enabled) {
+			writew(0x0, ep93xx_pwm->base + EP93XX_PWMx_ENABLE);
+			clk_disable_unprepare(ep93xx_pwm->clk);
+		}
+
+		return 0;
+	}
+
+	/*
+	 * The clock needs to be enabled to access the PWM registers.
+	 * Configuration can be changed at any time.
+	 */
+	if (!pwm_is_enabled(pwm)) {
+		ret = clk_prepare_enable(ep93xx_pwm->clk);
+		if (ret)
+			return ret;
+	}
+
+	c = clk_get_rate(ep93xx_pwm->clk);
+	c *= state->period;
+	do_div(c, 1000000000);
+	period_cycles = c;
+
+	c = period_cycles;
+	c *= state->duty_cycle;
+	do_div(c, state->period);
+	duty_cycles = c;
+
+	if (period_cycles < 0x10000 && duty_cycles < 0x10000) {
+		term = readw(base + EP93XX_PWMx_TERM_COUNT);
+
+		/* Order is important if PWM is running */
+		if (period_cycles > term) {
+			writew(period_cycles, base + EP93XX_PWMx_TERM_COUNT);
+			writew(duty_cycles, base + EP93XX_PWMx_DUTY_CYCLE);
+		} else {
+			writew(duty_cycles, base + EP93XX_PWMx_DUTY_CYCLE);
+			writew(period_cycles, base + EP93XX_PWMx_TERM_COUNT);
+		}
+		ret = 0;
+	} else {
+		ret = -EINVAL;
+	}
+
+	if (!pwm_is_enabled(pwm))
+		clk_disable_unprepare(ep93xx_pwm->clk);
+
+	if (ret)
+		return ret;
+
+	if (!enabled) {
+		ret = clk_prepare_enable(ep93xx_pwm->clk);
+		if (ret)
+			return ret;
+
+		writew(0x1, ep93xx_pwm->base + EP93XX_PWMx_ENABLE);
+	}
+
+	return 0;
+}
+
+static const struct pwm_ops ep93xx_pwm_ops = {
+	.request = ep93xx_pwm_request,
+	.free = ep93xx_pwm_free,
+	.apply = ep93xx_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static int ep93xx_pwm_probe(struct platform_device *pdev)
+{
+	struct ep93xx_pwm *ep93xx_pwm;
+	int ret;
+
+	ep93xx_pwm = devm_kzalloc(&pdev->dev, sizeof(*ep93xx_pwm), GFP_KERNEL);
+	if (!ep93xx_pwm)
+		return -ENOMEM;
+
+	ep93xx_pwm->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ep93xx_pwm->base))
+		return PTR_ERR(ep93xx_pwm->base);
+
+	ep93xx_pwm->clk = devm_clk_get(&pdev->dev, "pwm_clk");
+	if (IS_ERR(ep93xx_pwm->clk))
+		return PTR_ERR(ep93xx_pwm->clk);
+
+	ep93xx_pwm->chip.dev = &pdev->dev;
+	ep93xx_pwm->chip.ops = &ep93xx_pwm_ops;
+	ep93xx_pwm->chip.npwm = 1;
+
+	ret = devm_pwmchip_add(&pdev->dev, &ep93xx_pwm->chip);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct platform_driver ep93xx_pwm_driver = {
+	.driver = {
+		.name = "ep93xx-pwm",
+	},
+	.probe = ep93xx_pwm_probe,
+};
+module_platform_driver(ep93xx_pwm_driver);
+
+MODULE_DESCRIPTION("Cirrus Logic EP93xx PWM driver");
+MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>");
+MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>");
+MODULE_ALIAS("platform:ep93xx-pwm");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-fsl-ftm.c b/drivers/pwm/pwm-fsl-ftm.c
new file mode 100644
index 000000000..0247757f9
--- /dev/null
+++ b/drivers/pwm/pwm-fsl-ftm.c
@@ -0,0 +1,554 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Freescale FlexTimer Module (FTM) PWM Driver
+ *
+ *  Copyright 2012-2013 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/fsl/ftm.h>
+
+#define FTM_SC_CLK(c)	(((c) + 1) << FTM_SC_CLK_MASK_SHIFT)
+
+enum fsl_pwm_clk {
+	FSL_PWM_CLK_SYS,
+	FSL_PWM_CLK_FIX,
+	FSL_PWM_CLK_EXT,
+	FSL_PWM_CLK_CNTEN,
+	FSL_PWM_CLK_MAX
+};
+
+struct fsl_ftm_soc {
+	bool has_enable_bits;
+};
+
+struct fsl_pwm_periodcfg {
+	enum fsl_pwm_clk clk_select;
+	unsigned int clk_ps;
+	unsigned int mod_period;
+};
+
+struct fsl_pwm_chip {
+	struct pwm_chip chip;
+	struct mutex lock;
+	struct regmap *regmap;
+
+	/* This value is valid iff a pwm is running */
+	struct fsl_pwm_periodcfg period;
+
+	struct clk *ipg_clk;
+	struct clk *clk[FSL_PWM_CLK_MAX];
+
+	const struct fsl_ftm_soc *soc;
+};
+
+static inline struct fsl_pwm_chip *to_fsl_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct fsl_pwm_chip, chip);
+}
+
+static void ftm_clear_write_protection(struct fsl_pwm_chip *fpc)
+{
+	u32 val;
+
+	regmap_read(fpc->regmap, FTM_FMS, &val);
+	if (val & FTM_FMS_WPEN)
+		regmap_update_bits(fpc->regmap, FTM_MODE, FTM_MODE_WPDIS,
+				   FTM_MODE_WPDIS);
+}
+
+static void ftm_set_write_protection(struct fsl_pwm_chip *fpc)
+{
+	regmap_update_bits(fpc->regmap, FTM_FMS, FTM_FMS_WPEN, FTM_FMS_WPEN);
+}
+
+static bool fsl_pwm_periodcfg_are_equal(const struct fsl_pwm_periodcfg *a,
+					const struct fsl_pwm_periodcfg *b)
+{
+	if (a->clk_select != b->clk_select)
+		return false;
+	if (a->clk_ps != b->clk_ps)
+		return false;
+	if (a->mod_period != b->mod_period)
+		return false;
+	return true;
+}
+
+static int fsl_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	int ret;
+	struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
+
+	ret = clk_prepare_enable(fpc->ipg_clk);
+	if (!ret && fpc->soc->has_enable_bits) {
+		mutex_lock(&fpc->lock);
+		regmap_update_bits(fpc->regmap, FTM_SC, BIT(pwm->hwpwm + 16),
+				   BIT(pwm->hwpwm + 16));
+		mutex_unlock(&fpc->lock);
+	}
+
+	return ret;
+}
+
+static void fsl_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
+
+	if (fpc->soc->has_enable_bits) {
+		mutex_lock(&fpc->lock);
+		regmap_update_bits(fpc->regmap, FTM_SC, BIT(pwm->hwpwm + 16),
+				   0);
+		mutex_unlock(&fpc->lock);
+	}
+
+	clk_disable_unprepare(fpc->ipg_clk);
+}
+
+static unsigned int fsl_pwm_ticks_to_ns(struct fsl_pwm_chip *fpc,
+					  unsigned int ticks)
+{
+	unsigned long rate;
+	unsigned long long exval;
+
+	rate = clk_get_rate(fpc->clk[fpc->period.clk_select]);
+	exval = ticks;
+	exval *= 1000000000UL;
+	do_div(exval, rate >> fpc->period.clk_ps);
+	return exval;
+}
+
+static bool fsl_pwm_calculate_period_clk(struct fsl_pwm_chip *fpc,
+					 unsigned int period_ns,
+					 enum fsl_pwm_clk index,
+					 struct fsl_pwm_periodcfg *periodcfg
+					 )
+{
+	unsigned long long c;
+	unsigned int ps;
+
+	c = clk_get_rate(fpc->clk[index]);
+	c = c * period_ns;
+	do_div(c, 1000000000UL);
+
+	if (c == 0)
+		return false;
+
+	for (ps = 0; ps < 8 ; ++ps, c >>= 1) {
+		if (c <= 0x10000) {
+			periodcfg->clk_select = index;
+			periodcfg->clk_ps = ps;
+			periodcfg->mod_period = c - 1;
+			return true;
+		}
+	}
+	return false;
+}
+
+static bool fsl_pwm_calculate_period(struct fsl_pwm_chip *fpc,
+				     unsigned int period_ns,
+				     struct fsl_pwm_periodcfg *periodcfg)
+{
+	enum fsl_pwm_clk m0, m1;
+	unsigned long fix_rate, ext_rate;
+	bool ret;
+
+	ret = fsl_pwm_calculate_period_clk(fpc, period_ns, FSL_PWM_CLK_SYS,
+					   periodcfg);
+	if (ret)
+		return true;
+
+	fix_rate = clk_get_rate(fpc->clk[FSL_PWM_CLK_FIX]);
+	ext_rate = clk_get_rate(fpc->clk[FSL_PWM_CLK_EXT]);
+
+	if (fix_rate > ext_rate) {
+		m0 = FSL_PWM_CLK_FIX;
+		m1 = FSL_PWM_CLK_EXT;
+	} else {
+		m0 = FSL_PWM_CLK_EXT;
+		m1 = FSL_PWM_CLK_FIX;
+	}
+
+	ret = fsl_pwm_calculate_period_clk(fpc, period_ns, m0, periodcfg);
+	if (ret)
+		return true;
+
+	return fsl_pwm_calculate_period_clk(fpc, period_ns, m1, periodcfg);
+}
+
+static unsigned int fsl_pwm_calculate_duty(struct fsl_pwm_chip *fpc,
+					   unsigned int duty_ns)
+{
+	unsigned long long duty;
+
+	unsigned int period = fpc->period.mod_period + 1;
+	unsigned int period_ns = fsl_pwm_ticks_to_ns(fpc, period);
+
+	duty = (unsigned long long)duty_ns * period;
+	do_div(duty, period_ns);
+
+	return (unsigned int)duty;
+}
+
+static bool fsl_pwm_is_any_pwm_enabled(struct fsl_pwm_chip *fpc,
+				       struct pwm_device *pwm)
+{
+	u32 val;
+
+	regmap_read(fpc->regmap, FTM_OUTMASK, &val);
+	if (~val & 0xFF)
+		return true;
+	else
+		return false;
+}
+
+static bool fsl_pwm_is_other_pwm_enabled(struct fsl_pwm_chip *fpc,
+					 struct pwm_device *pwm)
+{
+	u32 val;
+
+	regmap_read(fpc->regmap, FTM_OUTMASK, &val);
+	if (~(val | BIT(pwm->hwpwm)) & 0xFF)
+		return true;
+	else
+		return false;
+}
+
+static int fsl_pwm_apply_config(struct fsl_pwm_chip *fpc,
+				struct pwm_device *pwm,
+				const struct pwm_state *newstate)
+{
+	unsigned int duty;
+	u32 reg_polarity;
+
+	struct fsl_pwm_periodcfg periodcfg;
+	bool do_write_period = false;
+
+	if (!fsl_pwm_calculate_period(fpc, newstate->period, &periodcfg)) {
+		dev_err(fpc->chip.dev, "failed to calculate new period\n");
+		return -EINVAL;
+	}
+
+	if (!fsl_pwm_is_any_pwm_enabled(fpc, pwm))
+		do_write_period = true;
+	/*
+	 * The Freescale FTM controller supports only a single period for
+	 * all PWM channels, therefore verify if the newly computed period
+	 * is different than the current period being used. In such case
+	 * we allow to change the period only if no other pwm is running.
+	 */
+	else if (!fsl_pwm_periodcfg_are_equal(&fpc->period, &periodcfg)) {
+		if (fsl_pwm_is_other_pwm_enabled(fpc, pwm)) {
+			dev_err(fpc->chip.dev,
+				"Cannot change period for PWM %u, disable other PWMs first\n",
+				pwm->hwpwm);
+			return -EBUSY;
+		}
+		if (fpc->period.clk_select != periodcfg.clk_select) {
+			int ret;
+			enum fsl_pwm_clk oldclk = fpc->period.clk_select;
+			enum fsl_pwm_clk newclk = periodcfg.clk_select;
+
+			ret = clk_prepare_enable(fpc->clk[newclk]);
+			if (ret)
+				return ret;
+			clk_disable_unprepare(fpc->clk[oldclk]);
+		}
+		do_write_period = true;
+	}
+
+	ftm_clear_write_protection(fpc);
+
+	if (do_write_period) {
+		regmap_update_bits(fpc->regmap, FTM_SC, FTM_SC_CLK_MASK,
+				   FTM_SC_CLK(periodcfg.clk_select));
+		regmap_update_bits(fpc->regmap, FTM_SC, FTM_SC_PS_MASK,
+				   periodcfg.clk_ps);
+		regmap_write(fpc->regmap, FTM_MOD, periodcfg.mod_period);
+
+		fpc->period = periodcfg;
+	}
+
+	duty = fsl_pwm_calculate_duty(fpc, newstate->duty_cycle);
+
+	regmap_write(fpc->regmap, FTM_CSC(pwm->hwpwm),
+		     FTM_CSC_MSB | FTM_CSC_ELSB);
+	regmap_write(fpc->regmap, FTM_CV(pwm->hwpwm), duty);
+
+	reg_polarity = 0;
+	if (newstate->polarity == PWM_POLARITY_INVERSED)
+		reg_polarity = BIT(pwm->hwpwm);
+
+	regmap_update_bits(fpc->regmap, FTM_POL, BIT(pwm->hwpwm), reg_polarity);
+
+	ftm_set_write_protection(fpc);
+
+	return 0;
+}
+
+static int fsl_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			 const struct pwm_state *newstate)
+{
+	struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
+	struct pwm_state *oldstate = &pwm->state;
+	int ret = 0;
+
+	/*
+	 * oldstate to newstate : action
+	 *
+	 * disabled to disabled : ignore
+	 * enabled to disabled : disable
+	 * enabled to enabled : update settings
+	 * disabled to enabled : update settings + enable
+	 */
+
+	mutex_lock(&fpc->lock);
+
+	if (!newstate->enabled) {
+		if (oldstate->enabled) {
+			regmap_update_bits(fpc->regmap, FTM_OUTMASK,
+					   BIT(pwm->hwpwm), BIT(pwm->hwpwm));
+			clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_CNTEN]);
+			clk_disable_unprepare(fpc->clk[fpc->period.clk_select]);
+		}
+
+		goto end_mutex;
+	}
+
+	ret = fsl_pwm_apply_config(fpc, pwm, newstate);
+	if (ret)
+		goto end_mutex;
+
+	/* check if need to enable */
+	if (!oldstate->enabled) {
+		ret = clk_prepare_enable(fpc->clk[fpc->period.clk_select]);
+		if (ret)
+			goto end_mutex;
+
+		ret = clk_prepare_enable(fpc->clk[FSL_PWM_CLK_CNTEN]);
+		if (ret) {
+			clk_disable_unprepare(fpc->clk[fpc->period.clk_select]);
+			goto end_mutex;
+		}
+
+		regmap_update_bits(fpc->regmap, FTM_OUTMASK, BIT(pwm->hwpwm),
+				   0);
+	}
+
+end_mutex:
+	mutex_unlock(&fpc->lock);
+	return ret;
+}
+
+static const struct pwm_ops fsl_pwm_ops = {
+	.request = fsl_pwm_request,
+	.free = fsl_pwm_free,
+	.apply = fsl_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static int fsl_pwm_init(struct fsl_pwm_chip *fpc)
+{
+	int ret;
+
+	ret = clk_prepare_enable(fpc->ipg_clk);
+	if (ret)
+		return ret;
+
+	regmap_write(fpc->regmap, FTM_CNTIN, 0x00);
+	regmap_write(fpc->regmap, FTM_OUTINIT, 0x00);
+	regmap_write(fpc->regmap, FTM_OUTMASK, 0xFF);
+
+	clk_disable_unprepare(fpc->ipg_clk);
+
+	return 0;
+}
+
+static bool fsl_pwm_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case FTM_FMS:
+	case FTM_MODE:
+	case FTM_CNT:
+		return true;
+	}
+	return false;
+}
+
+static const struct regmap_config fsl_pwm_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+
+	.max_register = FTM_PWMLOAD,
+	.volatile_reg = fsl_pwm_volatile_reg,
+	.cache_type = REGCACHE_FLAT,
+};
+
+static int fsl_pwm_probe(struct platform_device *pdev)
+{
+	struct fsl_pwm_chip *fpc;
+	void __iomem *base;
+	int ret;
+
+	fpc = devm_kzalloc(&pdev->dev, sizeof(*fpc), GFP_KERNEL);
+	if (!fpc)
+		return -ENOMEM;
+
+	mutex_init(&fpc->lock);
+
+	fpc->soc = of_device_get_match_data(&pdev->dev);
+	fpc->chip.dev = &pdev->dev;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	fpc->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "ftm_sys", base,
+						&fsl_pwm_regmap_config);
+	if (IS_ERR(fpc->regmap)) {
+		dev_err(&pdev->dev, "regmap init failed\n");
+		return PTR_ERR(fpc->regmap);
+	}
+
+	fpc->clk[FSL_PWM_CLK_SYS] = devm_clk_get(&pdev->dev, "ftm_sys");
+	if (IS_ERR(fpc->clk[FSL_PWM_CLK_SYS])) {
+		dev_err(&pdev->dev, "failed to get \"ftm_sys\" clock\n");
+		return PTR_ERR(fpc->clk[FSL_PWM_CLK_SYS]);
+	}
+
+	fpc->clk[FSL_PWM_CLK_FIX] = devm_clk_get(fpc->chip.dev, "ftm_fix");
+	if (IS_ERR(fpc->clk[FSL_PWM_CLK_FIX]))
+		return PTR_ERR(fpc->clk[FSL_PWM_CLK_FIX]);
+
+	fpc->clk[FSL_PWM_CLK_EXT] = devm_clk_get(fpc->chip.dev, "ftm_ext");
+	if (IS_ERR(fpc->clk[FSL_PWM_CLK_EXT]))
+		return PTR_ERR(fpc->clk[FSL_PWM_CLK_EXT]);
+
+	fpc->clk[FSL_PWM_CLK_CNTEN] =
+				devm_clk_get(fpc->chip.dev, "ftm_cnt_clk_en");
+	if (IS_ERR(fpc->clk[FSL_PWM_CLK_CNTEN]))
+		return PTR_ERR(fpc->clk[FSL_PWM_CLK_CNTEN]);
+
+	/*
+	 * ipg_clk is the interface clock for the IP. If not provided, use the
+	 * ftm_sys clock as the default.
+	 */
+	fpc->ipg_clk = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(fpc->ipg_clk))
+		fpc->ipg_clk = fpc->clk[FSL_PWM_CLK_SYS];
+
+
+	fpc->chip.ops = &fsl_pwm_ops;
+	fpc->chip.npwm = 8;
+
+	ret = devm_pwmchip_add(&pdev->dev, &fpc->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, fpc);
+
+	return fsl_pwm_init(fpc);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int fsl_pwm_suspend(struct device *dev)
+{
+	struct fsl_pwm_chip *fpc = dev_get_drvdata(dev);
+	int i;
+
+	regcache_cache_only(fpc->regmap, true);
+	regcache_mark_dirty(fpc->regmap);
+
+	for (i = 0; i < fpc->chip.npwm; i++) {
+		struct pwm_device *pwm = &fpc->chip.pwms[i];
+
+		if (!test_bit(PWMF_REQUESTED, &pwm->flags))
+			continue;
+
+		clk_disable_unprepare(fpc->ipg_clk);
+
+		if (!pwm_is_enabled(pwm))
+			continue;
+
+		clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_CNTEN]);
+		clk_disable_unprepare(fpc->clk[fpc->period.clk_select]);
+	}
+
+	return 0;
+}
+
+static int fsl_pwm_resume(struct device *dev)
+{
+	struct fsl_pwm_chip *fpc = dev_get_drvdata(dev);
+	int i;
+
+	for (i = 0; i < fpc->chip.npwm; i++) {
+		struct pwm_device *pwm = &fpc->chip.pwms[i];
+
+		if (!test_bit(PWMF_REQUESTED, &pwm->flags))
+			continue;
+
+		clk_prepare_enable(fpc->ipg_clk);
+
+		if (!pwm_is_enabled(pwm))
+			continue;
+
+		clk_prepare_enable(fpc->clk[fpc->period.clk_select]);
+		clk_prepare_enable(fpc->clk[FSL_PWM_CLK_CNTEN]);
+	}
+
+	/* restore all registers from cache */
+	regcache_cache_only(fpc->regmap, false);
+	regcache_sync(fpc->regmap);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops fsl_pwm_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(fsl_pwm_suspend, fsl_pwm_resume)
+};
+
+static const struct fsl_ftm_soc vf610_ftm_pwm = {
+	.has_enable_bits = false,
+};
+
+static const struct fsl_ftm_soc imx8qm_ftm_pwm = {
+	.has_enable_bits = true,
+};
+
+static const struct of_device_id fsl_pwm_dt_ids[] = {
+	{ .compatible = "fsl,vf610-ftm-pwm", .data = &vf610_ftm_pwm },
+	{ .compatible = "fsl,imx8qm-ftm-pwm", .data = &imx8qm_ftm_pwm },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, fsl_pwm_dt_ids);
+
+static struct platform_driver fsl_pwm_driver = {
+	.driver = {
+		.name = "fsl-ftm-pwm",
+		.of_match_table = fsl_pwm_dt_ids,
+		.pm = &fsl_pwm_pm_ops,
+	},
+	.probe = fsl_pwm_probe,
+};
+module_platform_driver(fsl_pwm_driver);
+
+MODULE_DESCRIPTION("Freescale FlexTimer Module PWM Driver");
+MODULE_AUTHOR("Xiubo Li <Li.Xiubo@freescale.com>");
+MODULE_ALIAS("platform:fsl-ftm-pwm");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-hibvt.c b/drivers/pwm/pwm-hibvt.c
new file mode 100644
index 000000000..1b9274c5a
--- /dev/null
+++ b/drivers/pwm/pwm-hibvt.c
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * PWM Controller Driver for HiSilicon BVT SoCs
+ *
+ * Copyright (c) 2016 HiSilicon Technologies Co., Ltd.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/reset.h>
+
+#define PWM_CFG0_ADDR(x)    (((x) * 0x20) + 0x0)
+#define PWM_CFG1_ADDR(x)    (((x) * 0x20) + 0x4)
+#define PWM_CFG2_ADDR(x)    (((x) * 0x20) + 0x8)
+#define PWM_CTRL_ADDR(x)    (((x) * 0x20) + 0xC)
+
+#define PWM_ENABLE_SHIFT    0
+#define PWM_ENABLE_MASK     BIT(0)
+
+#define PWM_POLARITY_SHIFT  1
+#define PWM_POLARITY_MASK   BIT(1)
+
+#define PWM_KEEP_SHIFT      2
+#define PWM_KEEP_MASK       BIT(2)
+
+#define PWM_PERIOD_MASK     GENMASK(31, 0)
+#define PWM_DUTY_MASK       GENMASK(31, 0)
+
+struct hibvt_pwm_chip {
+	struct pwm_chip	chip;
+	struct clk *clk;
+	void __iomem *base;
+	struct reset_control *rstc;
+	const struct hibvt_pwm_soc *soc;
+};
+
+struct hibvt_pwm_soc {
+	u32 num_pwms;
+	bool quirk_force_enable;
+};
+
+static const struct hibvt_pwm_soc hi3516cv300_soc_info = {
+	.num_pwms = 4,
+};
+
+static const struct hibvt_pwm_soc hi3519v100_soc_info = {
+	.num_pwms = 8,
+};
+
+static const struct hibvt_pwm_soc hi3559v100_shub_soc_info = {
+	.num_pwms = 8,
+	.quirk_force_enable = true,
+};
+
+static const struct hibvt_pwm_soc hi3559v100_soc_info = {
+	.num_pwms = 2,
+	.quirk_force_enable = true,
+};
+
+static inline struct hibvt_pwm_chip *to_hibvt_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct hibvt_pwm_chip, chip);
+}
+
+static void hibvt_pwm_set_bits(void __iomem *base, u32 offset,
+					u32 mask, u32 data)
+{
+	void __iomem *address = base + offset;
+	u32 value;
+
+	value = readl(address);
+	value &= ~mask;
+	value |= (data & mask);
+	writel(value, address);
+}
+
+static void hibvt_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct hibvt_pwm_chip *hi_pwm_chip = to_hibvt_pwm_chip(chip);
+
+	hibvt_pwm_set_bits(hi_pwm_chip->base, PWM_CTRL_ADDR(pwm->hwpwm),
+			PWM_ENABLE_MASK, 0x1);
+}
+
+static void hibvt_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct hibvt_pwm_chip *hi_pwm_chip = to_hibvt_pwm_chip(chip);
+
+	hibvt_pwm_set_bits(hi_pwm_chip->base, PWM_CTRL_ADDR(pwm->hwpwm),
+			PWM_ENABLE_MASK, 0x0);
+}
+
+static void hibvt_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+					int duty_cycle_ns, int period_ns)
+{
+	struct hibvt_pwm_chip *hi_pwm_chip = to_hibvt_pwm_chip(chip);
+	u32 freq, period, duty;
+
+	freq = div_u64(clk_get_rate(hi_pwm_chip->clk), 1000000);
+
+	period = div_u64(freq * period_ns, 1000);
+	duty = div_u64(period * duty_cycle_ns, period_ns);
+
+	hibvt_pwm_set_bits(hi_pwm_chip->base, PWM_CFG0_ADDR(pwm->hwpwm),
+			PWM_PERIOD_MASK, period);
+
+	hibvt_pwm_set_bits(hi_pwm_chip->base, PWM_CFG1_ADDR(pwm->hwpwm),
+			PWM_DUTY_MASK, duty);
+}
+
+static void hibvt_pwm_set_polarity(struct pwm_chip *chip,
+					struct pwm_device *pwm,
+					enum pwm_polarity polarity)
+{
+	struct hibvt_pwm_chip *hi_pwm_chip = to_hibvt_pwm_chip(chip);
+
+	if (polarity == PWM_POLARITY_INVERSED)
+		hibvt_pwm_set_bits(hi_pwm_chip->base, PWM_CTRL_ADDR(pwm->hwpwm),
+				PWM_POLARITY_MASK, (0x1 << PWM_POLARITY_SHIFT));
+	else
+		hibvt_pwm_set_bits(hi_pwm_chip->base, PWM_CTRL_ADDR(pwm->hwpwm),
+				PWM_POLARITY_MASK, (0x0 << PWM_POLARITY_SHIFT));
+}
+
+static int hibvt_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+			       struct pwm_state *state)
+{
+	struct hibvt_pwm_chip *hi_pwm_chip = to_hibvt_pwm_chip(chip);
+	void __iomem *base;
+	u32 freq, value;
+
+	freq = div_u64(clk_get_rate(hi_pwm_chip->clk), 1000000);
+	base = hi_pwm_chip->base;
+
+	value = readl(base + PWM_CFG0_ADDR(pwm->hwpwm));
+	state->period = div_u64(value * 1000, freq);
+
+	value = readl(base + PWM_CFG1_ADDR(pwm->hwpwm));
+	state->duty_cycle = div_u64(value * 1000, freq);
+
+	value = readl(base + PWM_CTRL_ADDR(pwm->hwpwm));
+	state->enabled = (PWM_ENABLE_MASK & value);
+	state->polarity = (PWM_POLARITY_MASK & value) ? PWM_POLARITY_INVERSED : PWM_POLARITY_NORMAL;
+
+	return 0;
+}
+
+static int hibvt_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			   const struct pwm_state *state)
+{
+	struct hibvt_pwm_chip *hi_pwm_chip = to_hibvt_pwm_chip(chip);
+
+	if (state->polarity != pwm->state.polarity)
+		hibvt_pwm_set_polarity(chip, pwm, state->polarity);
+
+	if (state->period != pwm->state.period ||
+	    state->duty_cycle != pwm->state.duty_cycle) {
+		hibvt_pwm_config(chip, pwm, state->duty_cycle, state->period);
+
+		/*
+		 * Some implementations require the PWM to be enabled twice
+		 * each time the duty cycle is refreshed.
+		 */
+		if (hi_pwm_chip->soc->quirk_force_enable && state->enabled)
+			hibvt_pwm_enable(chip, pwm);
+	}
+
+	if (state->enabled != pwm->state.enabled) {
+		if (state->enabled)
+			hibvt_pwm_enable(chip, pwm);
+		else
+			hibvt_pwm_disable(chip, pwm);
+	}
+
+	return 0;
+}
+
+static const struct pwm_ops hibvt_pwm_ops = {
+	.get_state = hibvt_pwm_get_state,
+	.apply = hibvt_pwm_apply,
+
+	.owner = THIS_MODULE,
+};
+
+static int hibvt_pwm_probe(struct platform_device *pdev)
+{
+	const struct hibvt_pwm_soc *soc =
+				of_device_get_match_data(&pdev->dev);
+	struct hibvt_pwm_chip *pwm_chip;
+	int ret, i;
+
+	pwm_chip = devm_kzalloc(&pdev->dev, sizeof(*pwm_chip), GFP_KERNEL);
+	if (pwm_chip == NULL)
+		return -ENOMEM;
+
+	pwm_chip->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pwm_chip->clk)) {
+		dev_err(&pdev->dev, "getting clock failed with %ld\n",
+				PTR_ERR(pwm_chip->clk));
+		return PTR_ERR(pwm_chip->clk);
+	}
+
+	pwm_chip->chip.ops = &hibvt_pwm_ops;
+	pwm_chip->chip.dev = &pdev->dev;
+	pwm_chip->chip.npwm = soc->num_pwms;
+	pwm_chip->soc = soc;
+
+	pwm_chip->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(pwm_chip->base))
+		return PTR_ERR(pwm_chip->base);
+
+	ret = clk_prepare_enable(pwm_chip->clk);
+	if (ret < 0)
+		return ret;
+
+	pwm_chip->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(pwm_chip->rstc)) {
+		clk_disable_unprepare(pwm_chip->clk);
+		return PTR_ERR(pwm_chip->rstc);
+	}
+
+	reset_control_assert(pwm_chip->rstc);
+	msleep(30);
+	reset_control_deassert(pwm_chip->rstc);
+
+	ret = pwmchip_add(&pwm_chip->chip);
+	if (ret < 0) {
+		clk_disable_unprepare(pwm_chip->clk);
+		return ret;
+	}
+
+	for (i = 0; i < pwm_chip->chip.npwm; i++) {
+		hibvt_pwm_set_bits(pwm_chip->base, PWM_CTRL_ADDR(i),
+				PWM_KEEP_MASK, (0x1 << PWM_KEEP_SHIFT));
+	}
+
+	platform_set_drvdata(pdev, pwm_chip);
+
+	return 0;
+}
+
+static int hibvt_pwm_remove(struct platform_device *pdev)
+{
+	struct hibvt_pwm_chip *pwm_chip;
+
+	pwm_chip = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&pwm_chip->chip);
+
+	reset_control_assert(pwm_chip->rstc);
+	msleep(30);
+	reset_control_deassert(pwm_chip->rstc);
+
+	clk_disable_unprepare(pwm_chip->clk);
+
+	return 0;
+}
+
+static const struct of_device_id hibvt_pwm_of_match[] = {
+	{ .compatible = "hisilicon,hi3516cv300-pwm",
+	  .data = &hi3516cv300_soc_info },
+	{ .compatible = "hisilicon,hi3519v100-pwm",
+	  .data = &hi3519v100_soc_info },
+	{ .compatible = "hisilicon,hi3559v100-shub-pwm",
+	  .data = &hi3559v100_shub_soc_info },
+	{ .compatible = "hisilicon,hi3559v100-pwm",
+	  .data = &hi3559v100_soc_info },
+	{  }
+};
+MODULE_DEVICE_TABLE(of, hibvt_pwm_of_match);
+
+static struct platform_driver hibvt_pwm_driver = {
+	.driver = {
+		.name = "hibvt-pwm",
+		.of_match_table = hibvt_pwm_of_match,
+	},
+	.probe = hibvt_pwm_probe,
+	.remove	= hibvt_pwm_remove,
+};
+module_platform_driver(hibvt_pwm_driver);
+
+MODULE_AUTHOR("Jian Yuan");
+MODULE_DESCRIPTION("HiSilicon BVT SoCs PWM driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-img.c b/drivers/pwm/pwm-img.c
new file mode 100644
index 000000000..0fccf061a
--- /dev/null
+++ b/drivers/pwm/pwm-img.c
@@ -0,0 +1,433 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Imagination Technologies Pulse Width Modulator driver
+ *
+ * Copyright (c) 2014-2015, Imagination Technologies
+ *
+ * Based on drivers/pwm/pwm-tegra.c, Copyright (c) 2010, NVIDIA Corporation
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/* PWM registers */
+#define PWM_CTRL_CFG				0x0000
+#define PWM_CTRL_CFG_NO_SUB_DIV			0
+#define PWM_CTRL_CFG_SUB_DIV0			1
+#define PWM_CTRL_CFG_SUB_DIV1			2
+#define PWM_CTRL_CFG_SUB_DIV0_DIV1		3
+#define PWM_CTRL_CFG_DIV_SHIFT(ch)		((ch) * 2 + 4)
+#define PWM_CTRL_CFG_DIV_MASK			0x3
+
+#define PWM_CH_CFG(ch)				(0x4 + (ch) * 4)
+#define PWM_CH_CFG_TMBASE_SHIFT			0
+#define PWM_CH_CFG_DUTY_SHIFT			16
+
+#define PERIP_PWM_PDM_CONTROL			0x0140
+#define PERIP_PWM_PDM_CONTROL_CH_MASK		0x1
+#define PERIP_PWM_PDM_CONTROL_CH_SHIFT(ch)	((ch) * 4)
+
+#define IMG_PWM_PM_TIMEOUT			1000 /* ms */
+
+/*
+ * PWM period is specified with a timebase register,
+ * in number of step periods. The PWM duty cycle is also
+ * specified in step periods, in the [0, $timebase] range.
+ * In other words, the timebase imposes the duty cycle
+ * resolution. Therefore, let's constraint the timebase to
+ * a minimum value to allow a sane range of duty cycle values.
+ * Imposing a minimum timebase, will impose a maximum PWM frequency.
+ *
+ * The value chosen is completely arbitrary.
+ */
+#define MIN_TMBASE_STEPS			16
+
+#define IMG_PWM_NPWM				4
+
+struct img_pwm_soc_data {
+	u32 max_timebase;
+};
+
+struct img_pwm_chip {
+	struct device	*dev;
+	struct pwm_chip	chip;
+	struct clk	*pwm_clk;
+	struct clk	*sys_clk;
+	void __iomem	*base;
+	struct regmap	*periph_regs;
+	int		max_period_ns;
+	int		min_period_ns;
+	const struct img_pwm_soc_data   *data;
+	u32		suspend_ctrl_cfg;
+	u32		suspend_ch_cfg[IMG_PWM_NPWM];
+};
+
+static inline struct img_pwm_chip *to_img_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct img_pwm_chip, chip);
+}
+
+static inline void img_pwm_writel(struct img_pwm_chip *imgchip,
+				  u32 reg, u32 val)
+{
+	writel(val, imgchip->base + reg);
+}
+
+static inline u32 img_pwm_readl(struct img_pwm_chip *imgchip, u32 reg)
+{
+	return readl(imgchip->base + reg);
+}
+
+static int img_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			  int duty_ns, int period_ns)
+{
+	u32 val, div, duty, timebase;
+	unsigned long mul, output_clk_hz, input_clk_hz;
+	struct img_pwm_chip *imgchip = to_img_pwm_chip(chip);
+	unsigned int max_timebase = imgchip->data->max_timebase;
+	int ret;
+
+	if (period_ns < imgchip->min_period_ns ||
+	    period_ns > imgchip->max_period_ns) {
+		dev_err(chip->dev, "configured period not in range\n");
+		return -ERANGE;
+	}
+
+	input_clk_hz = clk_get_rate(imgchip->pwm_clk);
+	output_clk_hz = DIV_ROUND_UP(NSEC_PER_SEC, period_ns);
+
+	mul = DIV_ROUND_UP(input_clk_hz, output_clk_hz);
+	if (mul <= max_timebase) {
+		div = PWM_CTRL_CFG_NO_SUB_DIV;
+		timebase = DIV_ROUND_UP(mul, 1);
+	} else if (mul <= max_timebase * 8) {
+		div = PWM_CTRL_CFG_SUB_DIV0;
+		timebase = DIV_ROUND_UP(mul, 8);
+	} else if (mul <= max_timebase * 64) {
+		div = PWM_CTRL_CFG_SUB_DIV1;
+		timebase = DIV_ROUND_UP(mul, 64);
+	} else if (mul <= max_timebase * 512) {
+		div = PWM_CTRL_CFG_SUB_DIV0_DIV1;
+		timebase = DIV_ROUND_UP(mul, 512);
+	} else {
+		dev_err(chip->dev,
+			"failed to configure timebase steps/divider value\n");
+		return -EINVAL;
+	}
+
+	duty = DIV_ROUND_UP(timebase * duty_ns, period_ns);
+
+	ret = pm_runtime_resume_and_get(chip->dev);
+	if (ret < 0)
+		return ret;
+
+	val = img_pwm_readl(imgchip, PWM_CTRL_CFG);
+	val &= ~(PWM_CTRL_CFG_DIV_MASK << PWM_CTRL_CFG_DIV_SHIFT(pwm->hwpwm));
+	val |= (div & PWM_CTRL_CFG_DIV_MASK) <<
+		PWM_CTRL_CFG_DIV_SHIFT(pwm->hwpwm);
+	img_pwm_writel(imgchip, PWM_CTRL_CFG, val);
+
+	val = (duty << PWM_CH_CFG_DUTY_SHIFT) |
+	      (timebase << PWM_CH_CFG_TMBASE_SHIFT);
+	img_pwm_writel(imgchip, PWM_CH_CFG(pwm->hwpwm), val);
+
+	pm_runtime_mark_last_busy(chip->dev);
+	pm_runtime_put_autosuspend(chip->dev);
+
+	return 0;
+}
+
+static int img_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	u32 val;
+	struct img_pwm_chip *imgchip = to_img_pwm_chip(chip);
+	int ret;
+
+	ret = pm_runtime_resume_and_get(chip->dev);
+	if (ret < 0)
+		return ret;
+
+	val = img_pwm_readl(imgchip, PWM_CTRL_CFG);
+	val |= BIT(pwm->hwpwm);
+	img_pwm_writel(imgchip, PWM_CTRL_CFG, val);
+
+	regmap_update_bits(imgchip->periph_regs, PERIP_PWM_PDM_CONTROL,
+			   PERIP_PWM_PDM_CONTROL_CH_MASK <<
+			   PERIP_PWM_PDM_CONTROL_CH_SHIFT(pwm->hwpwm), 0);
+
+	return 0;
+}
+
+static void img_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	u32 val;
+	struct img_pwm_chip *imgchip = to_img_pwm_chip(chip);
+
+	val = img_pwm_readl(imgchip, PWM_CTRL_CFG);
+	val &= ~BIT(pwm->hwpwm);
+	img_pwm_writel(imgchip, PWM_CTRL_CFG, val);
+
+	pm_runtime_mark_last_busy(chip->dev);
+	pm_runtime_put_autosuspend(chip->dev);
+}
+
+static int img_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			 const struct pwm_state *state)
+{
+	int err;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		if (pwm->state.enabled)
+			img_pwm_disable(chip, pwm);
+
+		return 0;
+	}
+
+	err = img_pwm_config(pwm->chip, pwm, state->duty_cycle, state->period);
+	if (err)
+		return err;
+
+	if (!pwm->state.enabled)
+		err = img_pwm_enable(chip, pwm);
+
+	return err;
+}
+
+static const struct pwm_ops img_pwm_ops = {
+	.apply = img_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static const struct img_pwm_soc_data pistachio_pwm = {
+	.max_timebase = 255,
+};
+
+static const struct of_device_id img_pwm_of_match[] = {
+	{
+		.compatible = "img,pistachio-pwm",
+		.data = &pistachio_pwm,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, img_pwm_of_match);
+
+static int img_pwm_runtime_suspend(struct device *dev)
+{
+	struct img_pwm_chip *imgchip = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(imgchip->pwm_clk);
+	clk_disable_unprepare(imgchip->sys_clk);
+
+	return 0;
+}
+
+static int img_pwm_runtime_resume(struct device *dev)
+{
+	struct img_pwm_chip *imgchip = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(imgchip->sys_clk);
+	if (ret < 0) {
+		dev_err(dev, "could not prepare or enable sys clock\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(imgchip->pwm_clk);
+	if (ret < 0) {
+		dev_err(dev, "could not prepare or enable pwm clock\n");
+		clk_disable_unprepare(imgchip->sys_clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int img_pwm_probe(struct platform_device *pdev)
+{
+	int ret;
+	u64 val;
+	unsigned long clk_rate;
+	struct img_pwm_chip *imgchip;
+	const struct of_device_id *of_dev_id;
+
+	imgchip = devm_kzalloc(&pdev->dev, sizeof(*imgchip), GFP_KERNEL);
+	if (!imgchip)
+		return -ENOMEM;
+
+	imgchip->dev = &pdev->dev;
+
+	imgchip->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(imgchip->base))
+		return PTR_ERR(imgchip->base);
+
+	of_dev_id = of_match_device(img_pwm_of_match, &pdev->dev);
+	if (!of_dev_id)
+		return -ENODEV;
+	imgchip->data = of_dev_id->data;
+
+	imgchip->periph_regs = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+							       "img,cr-periph");
+	if (IS_ERR(imgchip->periph_regs))
+		return PTR_ERR(imgchip->periph_regs);
+
+	imgchip->sys_clk = devm_clk_get(&pdev->dev, "sys");
+	if (IS_ERR(imgchip->sys_clk)) {
+		dev_err(&pdev->dev, "failed to get system clock\n");
+		return PTR_ERR(imgchip->sys_clk);
+	}
+
+	imgchip->pwm_clk = devm_clk_get(&pdev->dev, "imgchip");
+	if (IS_ERR(imgchip->pwm_clk)) {
+		dev_err(&pdev->dev, "failed to get imgchip clock\n");
+		return PTR_ERR(imgchip->pwm_clk);
+	}
+
+	platform_set_drvdata(pdev, imgchip);
+
+	pm_runtime_set_autosuspend_delay(&pdev->dev, IMG_PWM_PM_TIMEOUT);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+	if (!pm_runtime_enabled(&pdev->dev)) {
+		ret = img_pwm_runtime_resume(&pdev->dev);
+		if (ret)
+			goto err_pm_disable;
+	}
+
+	clk_rate = clk_get_rate(imgchip->pwm_clk);
+	if (!clk_rate) {
+		dev_err(&pdev->dev, "imgchip clock has no frequency\n");
+		ret = -EINVAL;
+		goto err_suspend;
+	}
+
+	/* The maximum input clock divider is 512 */
+	val = (u64)NSEC_PER_SEC * 512 * imgchip->data->max_timebase;
+	do_div(val, clk_rate);
+	imgchip->max_period_ns = val;
+
+	val = (u64)NSEC_PER_SEC * MIN_TMBASE_STEPS;
+	do_div(val, clk_rate);
+	imgchip->min_period_ns = val;
+
+	imgchip->chip.dev = &pdev->dev;
+	imgchip->chip.ops = &img_pwm_ops;
+	imgchip->chip.npwm = IMG_PWM_NPWM;
+
+	ret = pwmchip_add(&imgchip->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "pwmchip_add failed: %d\n", ret);
+		goto err_suspend;
+	}
+
+	return 0;
+
+err_suspend:
+	if (!pm_runtime_enabled(&pdev->dev))
+		img_pwm_runtime_suspend(&pdev->dev);
+err_pm_disable:
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	return ret;
+}
+
+static int img_pwm_remove(struct platform_device *pdev)
+{
+	struct img_pwm_chip *imgchip = platform_get_drvdata(pdev);
+
+	pm_runtime_disable(&pdev->dev);
+	if (!pm_runtime_status_suspended(&pdev->dev))
+		img_pwm_runtime_suspend(&pdev->dev);
+
+	pwmchip_remove(&imgchip->chip);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int img_pwm_suspend(struct device *dev)
+{
+	struct img_pwm_chip *imgchip = dev_get_drvdata(dev);
+	int i, ret;
+
+	if (pm_runtime_status_suspended(dev)) {
+		ret = img_pwm_runtime_resume(dev);
+		if (ret)
+			return ret;
+	}
+
+	for (i = 0; i < imgchip->chip.npwm; i++)
+		imgchip->suspend_ch_cfg[i] = img_pwm_readl(imgchip,
+							   PWM_CH_CFG(i));
+
+	imgchip->suspend_ctrl_cfg = img_pwm_readl(imgchip, PWM_CTRL_CFG);
+
+	img_pwm_runtime_suspend(dev);
+
+	return 0;
+}
+
+static int img_pwm_resume(struct device *dev)
+{
+	struct img_pwm_chip *imgchip = dev_get_drvdata(dev);
+	int ret;
+	int i;
+
+	ret = img_pwm_runtime_resume(dev);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < imgchip->chip.npwm; i++)
+		img_pwm_writel(imgchip, PWM_CH_CFG(i),
+			       imgchip->suspend_ch_cfg[i]);
+
+	img_pwm_writel(imgchip, PWM_CTRL_CFG, imgchip->suspend_ctrl_cfg);
+
+	for (i = 0; i < imgchip->chip.npwm; i++)
+		if (imgchip->suspend_ctrl_cfg & BIT(i))
+			regmap_update_bits(imgchip->periph_regs,
+					   PERIP_PWM_PDM_CONTROL,
+					   PERIP_PWM_PDM_CONTROL_CH_MASK <<
+					   PERIP_PWM_PDM_CONTROL_CH_SHIFT(i),
+					   0);
+
+	if (pm_runtime_status_suspended(dev))
+		img_pwm_runtime_suspend(dev);
+
+	return 0;
+}
+#endif /* CONFIG_PM */
+
+static const struct dev_pm_ops img_pwm_pm_ops = {
+	SET_RUNTIME_PM_OPS(img_pwm_runtime_suspend,
+			   img_pwm_runtime_resume,
+			   NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(img_pwm_suspend, img_pwm_resume)
+};
+
+static struct platform_driver img_pwm_driver = {
+	.driver = {
+		.name = "img-pwm",
+		.pm = &img_pwm_pm_ops,
+		.of_match_table = img_pwm_of_match,
+	},
+	.probe = img_pwm_probe,
+	.remove = img_pwm_remove,
+};
+module_platform_driver(img_pwm_driver);
+
+MODULE_AUTHOR("Sai Masarapu <Sai.Masarapu@imgtec.com>");
+MODULE_DESCRIPTION("Imagination Technologies PWM DAC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-imx-tpm.c b/drivers/pwm/pwm-imx-tpm.c
new file mode 100644
index 000000000..318dc0be9
--- /dev/null
+++ b/drivers/pwm/pwm-imx-tpm.c
@@ -0,0 +1,448 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2018-2019 NXP.
+ *
+ * Limitations:
+ * - The TPM counter and period counter are shared between
+ *   multiple channels, so all channels should use same period
+ *   settings.
+ * - Changes to polarity cannot be latched at the time of the
+ *   next period start.
+ * - Changing period and duty cycle together isn't atomic,
+ *   with the wrong timing it might happen that a period is
+ *   produced with old duty cycle but new period settings.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+#define PWM_IMX_TPM_PARAM	0x4
+#define PWM_IMX_TPM_GLOBAL	0x8
+#define PWM_IMX_TPM_SC		0x10
+#define PWM_IMX_TPM_CNT		0x14
+#define PWM_IMX_TPM_MOD		0x18
+#define PWM_IMX_TPM_CnSC(n)	(0x20 + (n) * 0x8)
+#define PWM_IMX_TPM_CnV(n)	(0x24 + (n) * 0x8)
+
+#define PWM_IMX_TPM_PARAM_CHAN			GENMASK(7, 0)
+
+#define PWM_IMX_TPM_SC_PS			GENMASK(2, 0)
+#define PWM_IMX_TPM_SC_CMOD			GENMASK(4, 3)
+#define PWM_IMX_TPM_SC_CMOD_INC_EVERY_CLK	FIELD_PREP(PWM_IMX_TPM_SC_CMOD, 1)
+#define PWM_IMX_TPM_SC_CPWMS			BIT(5)
+
+#define PWM_IMX_TPM_CnSC_CHF	BIT(7)
+#define PWM_IMX_TPM_CnSC_MSB	BIT(5)
+#define PWM_IMX_TPM_CnSC_MSA	BIT(4)
+
+/*
+ * The reference manual describes this field as two separate bits. The
+ * semantic of the two bits isn't orthogonal though, so they are treated
+ * together as a 2-bit field here.
+ */
+#define PWM_IMX_TPM_CnSC_ELS	GENMASK(3, 2)
+#define PWM_IMX_TPM_CnSC_ELS_INVERSED	FIELD_PREP(PWM_IMX_TPM_CnSC_ELS, 1)
+#define PWM_IMX_TPM_CnSC_ELS_NORMAL	FIELD_PREP(PWM_IMX_TPM_CnSC_ELS, 2)
+
+
+#define PWM_IMX_TPM_MOD_WIDTH	16
+#define PWM_IMX_TPM_MOD_MOD	GENMASK(PWM_IMX_TPM_MOD_WIDTH - 1, 0)
+
+struct imx_tpm_pwm_chip {
+	struct pwm_chip chip;
+	struct clk *clk;
+	void __iomem *base;
+	struct mutex lock;
+	u32 user_count;
+	u32 enable_count;
+	u32 real_period;
+};
+
+struct imx_tpm_pwm_param {
+	u8 prescale;
+	u32 mod;
+	u32 val;
+};
+
+static inline struct imx_tpm_pwm_chip *
+to_imx_tpm_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct imx_tpm_pwm_chip, chip);
+}
+
+/*
+ * This function determines for a given pwm_state *state that a consumer
+ * might request the pwm_state *real_state that eventually is implemented
+ * by the hardware and the necessary register values (in *p) to achieve
+ * this.
+ */
+static int pwm_imx_tpm_round_state(struct pwm_chip *chip,
+				   struct imx_tpm_pwm_param *p,
+				   struct pwm_state *real_state,
+				   const struct pwm_state *state)
+{
+	struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
+	u32 rate, prescale, period_count, clock_unit;
+	u64 tmp;
+
+	rate = clk_get_rate(tpm->clk);
+	tmp = (u64)state->period * rate;
+	clock_unit = DIV_ROUND_CLOSEST_ULL(tmp, NSEC_PER_SEC);
+	if (clock_unit <= PWM_IMX_TPM_MOD_MOD)
+		prescale = 0;
+	else
+		prescale = ilog2(clock_unit) + 1 - PWM_IMX_TPM_MOD_WIDTH;
+
+	if ((!FIELD_FIT(PWM_IMX_TPM_SC_PS, prescale)))
+		return -ERANGE;
+	p->prescale = prescale;
+
+	period_count = (clock_unit + ((1 << prescale) >> 1)) >> prescale;
+	p->mod = period_count;
+
+	/* calculate real period HW can support */
+	tmp = (u64)period_count << prescale;
+	tmp *= NSEC_PER_SEC;
+	real_state->period = DIV_ROUND_CLOSEST_ULL(tmp, rate);
+
+	/*
+	 * if eventually the PWM output is inactive, either
+	 * duty cycle is 0 or status is disabled, need to
+	 * make sure the output pin is inactive.
+	 */
+	if (!state->enabled)
+		real_state->duty_cycle = 0;
+	else
+		real_state->duty_cycle = state->duty_cycle;
+
+	tmp = (u64)p->mod * real_state->duty_cycle;
+	p->val = DIV64_U64_ROUND_CLOSEST(tmp, real_state->period);
+
+	real_state->polarity = state->polarity;
+	real_state->enabled = state->enabled;
+
+	return 0;
+}
+
+static int pwm_imx_tpm_get_state(struct pwm_chip *chip,
+				 struct pwm_device *pwm,
+				 struct pwm_state *state)
+{
+	struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
+	u32 rate, val, prescale;
+	u64 tmp;
+
+	/* get period */
+	state->period = tpm->real_period;
+
+	/* get duty cycle */
+	rate = clk_get_rate(tpm->clk);
+	val = readl(tpm->base + PWM_IMX_TPM_SC);
+	prescale = FIELD_GET(PWM_IMX_TPM_SC_PS, val);
+	tmp = readl(tpm->base + PWM_IMX_TPM_CnV(pwm->hwpwm));
+	tmp = (tmp << prescale) * NSEC_PER_SEC;
+	state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, rate);
+
+	/* get polarity */
+	val = readl(tpm->base + PWM_IMX_TPM_CnSC(pwm->hwpwm));
+	if ((val & PWM_IMX_TPM_CnSC_ELS) == PWM_IMX_TPM_CnSC_ELS_INVERSED)
+		state->polarity = PWM_POLARITY_INVERSED;
+	else
+		/*
+		 * Assume reserved values (2b00 and 2b11) to yield
+		 * normal polarity.
+		 */
+		state->polarity = PWM_POLARITY_NORMAL;
+
+	/* get channel status */
+	state->enabled = FIELD_GET(PWM_IMX_TPM_CnSC_ELS, val) ? true : false;
+
+	return 0;
+}
+
+/* this function is supposed to be called with mutex hold */
+static int pwm_imx_tpm_apply_hw(struct pwm_chip *chip,
+				struct imx_tpm_pwm_param *p,
+				struct pwm_state *state,
+				struct pwm_device *pwm)
+{
+	struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
+	bool period_update = false;
+	bool duty_update = false;
+	u32 val, cmod, cur_prescale;
+	unsigned long timeout;
+	struct pwm_state c;
+
+	if (state->period != tpm->real_period) {
+		/*
+		 * TPM counter is shared by multiple channels, so
+		 * prescale and period can NOT be modified when
+		 * there are multiple channels in use with different
+		 * period settings.
+		 */
+		if (tpm->user_count > 1)
+			return -EBUSY;
+
+		val = readl(tpm->base + PWM_IMX_TPM_SC);
+		cmod = FIELD_GET(PWM_IMX_TPM_SC_CMOD, val);
+		cur_prescale = FIELD_GET(PWM_IMX_TPM_SC_PS, val);
+		if (cmod && cur_prescale != p->prescale)
+			return -EBUSY;
+
+		/* set TPM counter prescale */
+		val &= ~PWM_IMX_TPM_SC_PS;
+		val |= FIELD_PREP(PWM_IMX_TPM_SC_PS, p->prescale);
+		writel(val, tpm->base + PWM_IMX_TPM_SC);
+
+		/*
+		 * set period count:
+		 * if the PWM is disabled (CMOD[1:0] = 2b00), then MOD register
+		 * is updated when MOD register is written.
+		 *
+		 * if the PWM is enabled (CMOD[1:0] ≠ 2b00), the period length
+		 * is latched into hardware when the next period starts.
+		 */
+		writel(p->mod, tpm->base + PWM_IMX_TPM_MOD);
+		tpm->real_period = state->period;
+		period_update = true;
+	}
+
+	pwm_imx_tpm_get_state(chip, pwm, &c);
+
+	/* polarity is NOT allowed to be changed if PWM is active */
+	if (c.enabled && c.polarity != state->polarity)
+		return -EBUSY;
+
+	if (state->duty_cycle != c.duty_cycle) {
+		/*
+		 * set channel value:
+		 * if the PWM is disabled (CMOD[1:0] = 2b00), then CnV register
+		 * is updated when CnV register is written.
+		 *
+		 * if the PWM is enabled (CMOD[1:0] ≠ 2b00), the duty length
+		 * is latched into hardware when the next period starts.
+		 */
+		writel(p->val, tpm->base + PWM_IMX_TPM_CnV(pwm->hwpwm));
+		duty_update = true;
+	}
+
+	/* make sure MOD & CnV registers are updated */
+	if (period_update || duty_update) {
+		timeout = jiffies + msecs_to_jiffies(tpm->real_period /
+						     NSEC_PER_MSEC + 1);
+		while (readl(tpm->base + PWM_IMX_TPM_MOD) != p->mod
+		       || readl(tpm->base + PWM_IMX_TPM_CnV(pwm->hwpwm))
+		       != p->val) {
+			if (time_after(jiffies, timeout))
+				return -ETIME;
+			cpu_relax();
+		}
+	}
+
+	/*
+	 * polarity settings will enabled/disable output status
+	 * immediately, so if the channel is disabled, need to
+	 * make sure MSA/MSB/ELS are set to 0 which means channel
+	 * disabled.
+	 */
+	val = readl(tpm->base + PWM_IMX_TPM_CnSC(pwm->hwpwm));
+	val &= ~(PWM_IMX_TPM_CnSC_ELS | PWM_IMX_TPM_CnSC_MSA |
+		 PWM_IMX_TPM_CnSC_MSB);
+	if (state->enabled) {
+		/*
+		 * set polarity (for edge-aligned PWM modes)
+		 *
+		 * ELS[1:0] = 2b10 yields normal polarity behaviour,
+		 * ELS[1:0] = 2b01 yields inversed polarity.
+		 * The other values are reserved.
+		 */
+		val |= PWM_IMX_TPM_CnSC_MSB;
+		val |= (state->polarity == PWM_POLARITY_NORMAL) ?
+			PWM_IMX_TPM_CnSC_ELS_NORMAL :
+			PWM_IMX_TPM_CnSC_ELS_INVERSED;
+	}
+	writel(val, tpm->base + PWM_IMX_TPM_CnSC(pwm->hwpwm));
+
+	/* control the counter status */
+	if (state->enabled != c.enabled) {
+		val = readl(tpm->base + PWM_IMX_TPM_SC);
+		if (state->enabled) {
+			if (++tpm->enable_count == 1)
+				val |= PWM_IMX_TPM_SC_CMOD_INC_EVERY_CLK;
+		} else {
+			if (--tpm->enable_count == 0)
+				val &= ~PWM_IMX_TPM_SC_CMOD;
+		}
+		writel(val, tpm->base + PWM_IMX_TPM_SC);
+	}
+
+	return 0;
+}
+
+static int pwm_imx_tpm_apply(struct pwm_chip *chip,
+			     struct pwm_device *pwm,
+			     const struct pwm_state *state)
+{
+	struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
+	struct imx_tpm_pwm_param param;
+	struct pwm_state real_state;
+	int ret;
+
+	ret = pwm_imx_tpm_round_state(chip, &param, &real_state, state);
+	if (ret)
+		return ret;
+
+	mutex_lock(&tpm->lock);
+	ret = pwm_imx_tpm_apply_hw(chip, &param, &real_state, pwm);
+	mutex_unlock(&tpm->lock);
+
+	return ret;
+}
+
+static int pwm_imx_tpm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
+
+	mutex_lock(&tpm->lock);
+	tpm->user_count++;
+	mutex_unlock(&tpm->lock);
+
+	return 0;
+}
+
+static void pwm_imx_tpm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct imx_tpm_pwm_chip *tpm = to_imx_tpm_pwm_chip(chip);
+
+	mutex_lock(&tpm->lock);
+	tpm->user_count--;
+	mutex_unlock(&tpm->lock);
+}
+
+static const struct pwm_ops imx_tpm_pwm_ops = {
+	.request = pwm_imx_tpm_request,
+	.free = pwm_imx_tpm_free,
+	.get_state = pwm_imx_tpm_get_state,
+	.apply = pwm_imx_tpm_apply,
+	.owner = THIS_MODULE,
+};
+
+static int pwm_imx_tpm_probe(struct platform_device *pdev)
+{
+	struct imx_tpm_pwm_chip *tpm;
+	int ret;
+	u32 val;
+
+	tpm = devm_kzalloc(&pdev->dev, sizeof(*tpm), GFP_KERNEL);
+	if (!tpm)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, tpm);
+
+	tpm->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(tpm->base))
+		return PTR_ERR(tpm->base);
+
+	tpm->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(tpm->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(tpm->clk),
+				     "failed to get PWM clock\n");
+
+	ret = clk_prepare_enable(tpm->clk);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"failed to prepare or enable clock: %d\n", ret);
+		return ret;
+	}
+
+	tpm->chip.dev = &pdev->dev;
+	tpm->chip.ops = &imx_tpm_pwm_ops;
+
+	/* get number of channels */
+	val = readl(tpm->base + PWM_IMX_TPM_PARAM);
+	tpm->chip.npwm = FIELD_GET(PWM_IMX_TPM_PARAM_CHAN, val);
+
+	mutex_init(&tpm->lock);
+
+	ret = pwmchip_add(&tpm->chip);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
+		clk_disable_unprepare(tpm->clk);
+	}
+
+	return ret;
+}
+
+static int pwm_imx_tpm_remove(struct platform_device *pdev)
+{
+	struct imx_tpm_pwm_chip *tpm = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&tpm->chip);
+
+	clk_disable_unprepare(tpm->clk);
+
+	return 0;
+}
+
+static int __maybe_unused pwm_imx_tpm_suspend(struct device *dev)
+{
+	struct imx_tpm_pwm_chip *tpm = dev_get_drvdata(dev);
+
+	if (tpm->enable_count > 0)
+		return -EBUSY;
+
+	/*
+	 * Force 'real_period' to be zero to force period update code
+	 * can be executed after system resume back, since suspend causes
+	 * the period related registers to become their reset values.
+	 */
+	tpm->real_period = 0;
+
+	clk_disable_unprepare(tpm->clk);
+
+	return 0;
+}
+
+static int __maybe_unused pwm_imx_tpm_resume(struct device *dev)
+{
+	struct imx_tpm_pwm_chip *tpm = dev_get_drvdata(dev);
+	int ret = 0;
+
+	ret = clk_prepare_enable(tpm->clk);
+	if (ret)
+		dev_err(dev, "failed to prepare or enable clock: %d\n", ret);
+
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(imx_tpm_pwm_pm,
+			 pwm_imx_tpm_suspend, pwm_imx_tpm_resume);
+
+static const struct of_device_id imx_tpm_pwm_dt_ids[] = {
+	{ .compatible = "fsl,imx7ulp-pwm", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_tpm_pwm_dt_ids);
+
+static struct platform_driver imx_tpm_pwm_driver = {
+	.driver = {
+		.name = "imx7ulp-tpm-pwm",
+		.of_match_table = imx_tpm_pwm_dt_ids,
+		.pm = &imx_tpm_pwm_pm,
+	},
+	.probe	= pwm_imx_tpm_probe,
+	.remove = pwm_imx_tpm_remove,
+};
+module_platform_driver(imx_tpm_pwm_driver);
+
+MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp.com>");
+MODULE_DESCRIPTION("i.MX TPM PWM Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-imx1.c b/drivers/pwm/pwm-imx1.c
new file mode 100644
index 000000000..1f2eb1c8f
--- /dev/null
+++ b/drivers/pwm/pwm-imx1.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * simple driver for PWM (Pulse Width Modulator) controller
+ *
+ * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+#define MX1_PWMC			0x00   /* PWM Control Register */
+#define MX1_PWMS			0x04   /* PWM Sample Register */
+#define MX1_PWMP			0x08   /* PWM Period Register */
+
+#define MX1_PWMC_EN			BIT(4)
+
+struct pwm_imx1_chip {
+	struct clk *clk_ipg;
+	struct clk *clk_per;
+	void __iomem *mmio_base;
+	struct pwm_chip chip;
+};
+
+#define to_pwm_imx1_chip(chip)	container_of(chip, struct pwm_imx1_chip, chip)
+
+static int pwm_imx1_clk_prepare_enable(struct pwm_chip *chip)
+{
+	struct pwm_imx1_chip *imx = to_pwm_imx1_chip(chip);
+	int ret;
+
+	ret = clk_prepare_enable(imx->clk_ipg);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(imx->clk_per);
+	if (ret) {
+		clk_disable_unprepare(imx->clk_ipg);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void pwm_imx1_clk_disable_unprepare(struct pwm_chip *chip)
+{
+	struct pwm_imx1_chip *imx = to_pwm_imx1_chip(chip);
+
+	clk_disable_unprepare(imx->clk_per);
+	clk_disable_unprepare(imx->clk_ipg);
+}
+
+static int pwm_imx1_config(struct pwm_chip *chip,
+			   struct pwm_device *pwm, u64 duty_ns, u64 period_ns)
+{
+	struct pwm_imx1_chip *imx = to_pwm_imx1_chip(chip);
+	u32 max, p;
+
+	/*
+	 * The PWM subsystem allows for exact frequencies. However,
+	 * I cannot connect a scope on my device to the PWM line and
+	 * thus cannot provide the program the PWM controller
+	 * exactly. Instead, I'm relying on the fact that the
+	 * Bootloader (u-boot or WinCE+haret) has programmed the PWM
+	 * function group already. So I'll just modify the PWM sample
+	 * register to follow the ratio of duty_ns vs. period_ns
+	 * accordingly.
+	 *
+	 * This is good enough for programming the brightness of
+	 * the LCD backlight.
+	 *
+	 * The real implementation would divide PERCLK[0] first by
+	 * both the prescaler (/1 .. /128) and then by CLKSEL
+	 * (/2 .. /16).
+	 */
+	max = readl(imx->mmio_base + MX1_PWMP);
+	p = mul_u64_u64_div_u64(max, duty_ns, period_ns);
+
+	writel(max - p, imx->mmio_base + MX1_PWMS);
+
+	return 0;
+}
+
+static int pwm_imx1_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct pwm_imx1_chip *imx = to_pwm_imx1_chip(chip);
+	u32 value;
+	int ret;
+
+	ret = pwm_imx1_clk_prepare_enable(chip);
+	if (ret < 0)
+		return ret;
+
+	value = readl(imx->mmio_base + MX1_PWMC);
+	value |= MX1_PWMC_EN;
+	writel(value, imx->mmio_base + MX1_PWMC);
+
+	return 0;
+}
+
+static void pwm_imx1_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct pwm_imx1_chip *imx = to_pwm_imx1_chip(chip);
+	u32 value;
+
+	value = readl(imx->mmio_base + MX1_PWMC);
+	value &= ~MX1_PWMC_EN;
+	writel(value, imx->mmio_base + MX1_PWMC);
+
+	pwm_imx1_clk_disable_unprepare(chip);
+}
+
+static int pwm_imx1_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			  const struct pwm_state *state)
+{
+	int err;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		if (pwm->state.enabled)
+			pwm_imx1_disable(chip, pwm);
+
+		return 0;
+	}
+
+	err = pwm_imx1_config(chip, pwm, state->duty_cycle, state->period);
+	if (err)
+		return err;
+
+	if (!pwm->state.enabled)
+		return pwm_imx1_enable(chip, pwm);
+
+	return 0;
+}
+
+static const struct pwm_ops pwm_imx1_ops = {
+	.apply = pwm_imx1_apply,
+	.owner = THIS_MODULE,
+};
+
+static const struct of_device_id pwm_imx1_dt_ids[] = {
+	{ .compatible = "fsl,imx1-pwm", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pwm_imx1_dt_ids);
+
+static int pwm_imx1_probe(struct platform_device *pdev)
+{
+	struct pwm_imx1_chip *imx;
+
+	imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
+	if (!imx)
+		return -ENOMEM;
+
+	imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(imx->clk_ipg))
+		return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_ipg),
+				     "getting ipg clock failed\n");
+
+	imx->clk_per = devm_clk_get(&pdev->dev, "per");
+	if (IS_ERR(imx->clk_per))
+		return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_per),
+				     "failed to get peripheral clock\n");
+
+	imx->chip.ops = &pwm_imx1_ops;
+	imx->chip.dev = &pdev->dev;
+	imx->chip.npwm = 1;
+
+	imx->mmio_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(imx->mmio_base))
+		return PTR_ERR(imx->mmio_base);
+
+	return devm_pwmchip_add(&pdev->dev, &imx->chip);
+}
+
+static struct platform_driver pwm_imx1_driver = {
+	.driver = {
+		.name = "pwm-imx1",
+		.of_match_table = pwm_imx1_dt_ids,
+	},
+	.probe = pwm_imx1_probe,
+};
+module_platform_driver(pwm_imx1_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
diff --git a/drivers/pwm/pwm-imx27.c b/drivers/pwm/pwm-imx27.c
new file mode 100644
index 000000000..3a22c2fdd
--- /dev/null
+++ b/drivers/pwm/pwm-imx27.c
@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * simple driver for PWM (Pulse Width Modulator) controller
+ *
+ * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
+ *
+ * Limitations:
+ * - When disabled the output is driven to 0 independent of the configured
+ *   polarity.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+#define MX3_PWMCR			0x00    /* PWM Control Register */
+#define MX3_PWMSR			0x04    /* PWM Status Register */
+#define MX3_PWMSAR			0x0C    /* PWM Sample Register */
+#define MX3_PWMPR			0x10    /* PWM Period Register */
+
+#define MX3_PWMCR_FWM			GENMASK(27, 26)
+#define MX3_PWMCR_STOPEN		BIT(25)
+#define MX3_PWMCR_DOZEN			BIT(24)
+#define MX3_PWMCR_WAITEN		BIT(23)
+#define MX3_PWMCR_DBGEN			BIT(22)
+#define MX3_PWMCR_BCTR			BIT(21)
+#define MX3_PWMCR_HCTR			BIT(20)
+
+#define MX3_PWMCR_POUTC			GENMASK(19, 18)
+#define MX3_PWMCR_POUTC_NORMAL		0
+#define MX3_PWMCR_POUTC_INVERTED	1
+#define MX3_PWMCR_POUTC_OFF		2
+
+#define MX3_PWMCR_CLKSRC		GENMASK(17, 16)
+#define MX3_PWMCR_CLKSRC_OFF		0
+#define MX3_PWMCR_CLKSRC_IPG		1
+#define MX3_PWMCR_CLKSRC_IPG_HIGH	2
+#define MX3_PWMCR_CLKSRC_IPG_32K	3
+
+#define MX3_PWMCR_PRESCALER		GENMASK(15, 4)
+
+#define MX3_PWMCR_SWR			BIT(3)
+
+#define MX3_PWMCR_REPEAT		GENMASK(2, 1)
+#define MX3_PWMCR_REPEAT_1X		0
+#define MX3_PWMCR_REPEAT_2X		1
+#define MX3_PWMCR_REPEAT_4X		2
+#define MX3_PWMCR_REPEAT_8X		3
+
+#define MX3_PWMCR_EN			BIT(0)
+
+#define MX3_PWMSR_FWE			BIT(6)
+#define MX3_PWMSR_CMP			BIT(5)
+#define MX3_PWMSR_ROV			BIT(4)
+#define MX3_PWMSR_FE			BIT(3)
+
+#define MX3_PWMSR_FIFOAV		GENMASK(2, 0)
+#define MX3_PWMSR_FIFOAV_EMPTY		0
+#define MX3_PWMSR_FIFOAV_1WORD		1
+#define MX3_PWMSR_FIFOAV_2WORDS		2
+#define MX3_PWMSR_FIFOAV_3WORDS		3
+#define MX3_PWMSR_FIFOAV_4WORDS		4
+
+#define MX3_PWMCR_PRESCALER_SET(x)	FIELD_PREP(MX3_PWMCR_PRESCALER, (x) - 1)
+#define MX3_PWMCR_PRESCALER_GET(x)	(FIELD_GET(MX3_PWMCR_PRESCALER, \
+						   (x)) + 1)
+
+#define MX3_PWM_SWR_LOOP		5
+
+/* PWMPR register value of 0xffff has the same effect as 0xfffe */
+#define MX3_PWMPR_MAX			0xfffe
+
+struct pwm_imx27_chip {
+	struct clk	*clk_ipg;
+	struct clk	*clk_per;
+	void __iomem	*mmio_base;
+	struct pwm_chip	chip;
+
+	/*
+	 * The driver cannot read the current duty cycle from the hardware if
+	 * the hardware is disabled. Cache the last programmed duty cycle
+	 * value to return in that case.
+	 */
+	unsigned int duty_cycle;
+};
+
+#define to_pwm_imx27_chip(chip)	container_of(chip, struct pwm_imx27_chip, chip)
+
+static int pwm_imx27_clk_prepare_enable(struct pwm_imx27_chip *imx)
+{
+	int ret;
+
+	ret = clk_prepare_enable(imx->clk_ipg);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(imx->clk_per);
+	if (ret) {
+		clk_disable_unprepare(imx->clk_ipg);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void pwm_imx27_clk_disable_unprepare(struct pwm_imx27_chip *imx)
+{
+	clk_disable_unprepare(imx->clk_per);
+	clk_disable_unprepare(imx->clk_ipg);
+}
+
+static int pwm_imx27_get_state(struct pwm_chip *chip,
+			       struct pwm_device *pwm, struct pwm_state *state)
+{
+	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
+	u32 period, prescaler, pwm_clk, val;
+	u64 tmp;
+	int ret;
+
+	ret = pwm_imx27_clk_prepare_enable(imx);
+	if (ret < 0)
+		return 0;
+
+	val = readl(imx->mmio_base + MX3_PWMCR);
+
+	if (val & MX3_PWMCR_EN)
+		state->enabled = true;
+	else
+		state->enabled = false;
+
+	switch (FIELD_GET(MX3_PWMCR_POUTC, val)) {
+	case MX3_PWMCR_POUTC_NORMAL:
+		state->polarity = PWM_POLARITY_NORMAL;
+		break;
+	case MX3_PWMCR_POUTC_INVERTED:
+		state->polarity = PWM_POLARITY_INVERSED;
+		break;
+	default:
+		dev_warn(chip->dev, "can't set polarity, output disconnected");
+	}
+
+	prescaler = MX3_PWMCR_PRESCALER_GET(val);
+	pwm_clk = clk_get_rate(imx->clk_per);
+	val = readl(imx->mmio_base + MX3_PWMPR);
+	period = val >= MX3_PWMPR_MAX ? MX3_PWMPR_MAX : val;
+
+	/* PWMOUT (Hz) = PWMCLK / (PWMPR + 2) */
+	tmp = NSEC_PER_SEC * (u64)(period + 2) * prescaler;
+	state->period = DIV_ROUND_UP_ULL(tmp, pwm_clk);
+
+	/*
+	 * PWMSAR can be read only if PWM is enabled. If the PWM is disabled,
+	 * use the cached value.
+	 */
+	if (state->enabled)
+		val = readl(imx->mmio_base + MX3_PWMSAR);
+	else
+		val = imx->duty_cycle;
+
+	tmp = NSEC_PER_SEC * (u64)(val) * prescaler;
+	state->duty_cycle = DIV_ROUND_UP_ULL(tmp, pwm_clk);
+
+	pwm_imx27_clk_disable_unprepare(imx);
+
+	return 0;
+}
+
+static void pwm_imx27_sw_reset(struct pwm_chip *chip)
+{
+	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
+	struct device *dev = chip->dev;
+	int wait_count = 0;
+	u32 cr;
+
+	writel(MX3_PWMCR_SWR, imx->mmio_base + MX3_PWMCR);
+	do {
+		usleep_range(200, 1000);
+		cr = readl(imx->mmio_base + MX3_PWMCR);
+	} while ((cr & MX3_PWMCR_SWR) &&
+		 (wait_count++ < MX3_PWM_SWR_LOOP));
+
+	if (cr & MX3_PWMCR_SWR)
+		dev_warn(dev, "software reset timeout\n");
+}
+
+static void pwm_imx27_wait_fifo_slot(struct pwm_chip *chip,
+				     struct pwm_device *pwm)
+{
+	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
+	struct device *dev = chip->dev;
+	unsigned int period_ms;
+	int fifoav;
+	u32 sr;
+
+	sr = readl(imx->mmio_base + MX3_PWMSR);
+	fifoav = FIELD_GET(MX3_PWMSR_FIFOAV, sr);
+	if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) {
+		period_ms = DIV_ROUND_UP_ULL(pwm_get_period(pwm),
+					 NSEC_PER_MSEC);
+		msleep(period_ms);
+
+		sr = readl(imx->mmio_base + MX3_PWMSR);
+		if (fifoav == FIELD_GET(MX3_PWMSR_FIFOAV, sr))
+			dev_warn(dev, "there is no free FIFO slot\n");
+	}
+}
+
+static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			   const struct pwm_state *state)
+{
+	unsigned long period_cycles, duty_cycles, prescale;
+	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
+	struct pwm_state cstate;
+	unsigned long long c;
+	unsigned long long clkrate;
+	int ret;
+	u32 cr;
+
+	pwm_get_state(pwm, &cstate);
+
+	clkrate = clk_get_rate(imx->clk_per);
+	c = clkrate * state->period;
+
+	do_div(c, NSEC_PER_SEC);
+	period_cycles = c;
+
+	prescale = period_cycles / 0x10000 + 1;
+
+	period_cycles /= prescale;
+	c = clkrate * state->duty_cycle;
+	do_div(c, NSEC_PER_SEC);
+	duty_cycles = c;
+	duty_cycles /= prescale;
+
+	/*
+	 * according to imx pwm RM, the real period value should be PERIOD
+	 * value in PWMPR plus 2.
+	 */
+	if (period_cycles > 2)
+		period_cycles -= 2;
+	else
+		period_cycles = 0;
+
+	/*
+	 * Wait for a free FIFO slot if the PWM is already enabled, and flush
+	 * the FIFO if the PWM was disabled and is about to be enabled.
+	 */
+	if (cstate.enabled) {
+		pwm_imx27_wait_fifo_slot(chip, pwm);
+	} else {
+		ret = pwm_imx27_clk_prepare_enable(imx);
+		if (ret)
+			return ret;
+
+		pwm_imx27_sw_reset(chip);
+	}
+
+	writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
+	writel(period_cycles, imx->mmio_base + MX3_PWMPR);
+
+	/*
+	 * Store the duty cycle for future reference in cases where the
+	 * MX3_PWMSAR register can't be read (i.e. when the PWM is disabled).
+	 */
+	imx->duty_cycle = duty_cycles;
+
+	cr = MX3_PWMCR_PRESCALER_SET(prescale) |
+	     MX3_PWMCR_STOPEN | MX3_PWMCR_DOZEN | MX3_PWMCR_WAITEN |
+	     FIELD_PREP(MX3_PWMCR_CLKSRC, MX3_PWMCR_CLKSRC_IPG_HIGH) |
+	     MX3_PWMCR_DBGEN;
+
+	if (state->polarity == PWM_POLARITY_INVERSED)
+		cr |= FIELD_PREP(MX3_PWMCR_POUTC,
+				MX3_PWMCR_POUTC_INVERTED);
+
+	if (state->enabled)
+		cr |= MX3_PWMCR_EN;
+
+	writel(cr, imx->mmio_base + MX3_PWMCR);
+
+	if (!state->enabled)
+		pwm_imx27_clk_disable_unprepare(imx);
+
+	return 0;
+}
+
+static const struct pwm_ops pwm_imx27_ops = {
+	.apply = pwm_imx27_apply,
+	.get_state = pwm_imx27_get_state,
+	.owner = THIS_MODULE,
+};
+
+static const struct of_device_id pwm_imx27_dt_ids[] = {
+	{ .compatible = "fsl,imx27-pwm", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pwm_imx27_dt_ids);
+
+static int pwm_imx27_probe(struct platform_device *pdev)
+{
+	struct pwm_imx27_chip *imx;
+	int ret;
+	u32 pwmcr;
+
+	imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
+	if (imx == NULL)
+		return -ENOMEM;
+
+	imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(imx->clk_ipg))
+		return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_ipg),
+				     "getting ipg clock failed\n");
+
+	imx->clk_per = devm_clk_get(&pdev->dev, "per");
+	if (IS_ERR(imx->clk_per))
+		return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_per),
+				     "failed to get peripheral clock\n");
+
+	imx->chip.ops = &pwm_imx27_ops;
+	imx->chip.dev = &pdev->dev;
+	imx->chip.npwm = 1;
+
+	imx->mmio_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(imx->mmio_base))
+		return PTR_ERR(imx->mmio_base);
+
+	ret = pwm_imx27_clk_prepare_enable(imx);
+	if (ret)
+		return ret;
+
+	/* keep clks on if pwm is running */
+	pwmcr = readl(imx->mmio_base + MX3_PWMCR);
+	if (!(pwmcr & MX3_PWMCR_EN))
+		pwm_imx27_clk_disable_unprepare(imx);
+
+	return devm_pwmchip_add(&pdev->dev, &imx->chip);
+}
+
+static struct platform_driver imx_pwm_driver = {
+	.driver = {
+		.name = "pwm-imx27",
+		.of_match_table = pwm_imx27_dt_ids,
+	},
+	.probe = pwm_imx27_probe,
+};
+module_platform_driver(imx_pwm_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
diff --git a/drivers/pwm/pwm-intel-lgm.c b/drivers/pwm/pwm-intel-lgm.c
new file mode 100644
index 000000000..0cd7dd548
--- /dev/null
+++ b/drivers/pwm/pwm-intel-lgm.c
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Intel Corporation.
+ *
+ * Limitations:
+ * - The hardware supports fixed period & configures only 2-wire mode.
+ * - Supports normal polarity. Does not support changing polarity.
+ * - When PWM is disabled, output of PWM will become 0(inactive). It doesn't
+ *   keep track of running period.
+ * - When duty cycle is changed, PWM output may be a mix of previous setting
+ *   and new setting for the first period. From second period, the output is
+ *   based on new setting.
+ * - It is a dedicated PWM fan controller. There are no other consumers for
+ *   this PWM controller.
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#define LGM_PWM_FAN_CON0		0x0
+#define LGM_PWM_FAN_EN_EN		BIT(0)
+#define LGM_PWM_FAN_EN_DIS		0x0
+#define LGM_PWM_FAN_EN_MSK		BIT(0)
+#define LGM_PWM_FAN_MODE_2WIRE		0x0
+#define LGM_PWM_FAN_MODE_MSK		BIT(1)
+#define LGM_PWM_FAN_DC_MSK		GENMASK(23, 16)
+
+#define LGM_PWM_FAN_CON1		0x4
+#define LGM_PWM_FAN_MAX_RPM_MSK		GENMASK(15, 0)
+
+#define LGM_PWM_MAX_RPM			(BIT(16) - 1)
+#define LGM_PWM_DEFAULT_RPM		4000
+#define LGM_PWM_MAX_DUTY_CYCLE		(BIT(8) - 1)
+
+#define LGM_PWM_DC_BITS			8
+
+#define LGM_PWM_PERIOD_2WIRE_NS		(40 * NSEC_PER_MSEC)
+
+struct lgm_pwm_chip {
+	struct pwm_chip chip;
+	struct regmap *regmap;
+	u32 period;
+};
+
+static inline struct lgm_pwm_chip *to_lgm_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct lgm_pwm_chip, chip);
+}
+
+static int lgm_pwm_enable(struct pwm_chip *chip, bool enable)
+{
+	struct lgm_pwm_chip *pc = to_lgm_pwm_chip(chip);
+	struct regmap *regmap = pc->regmap;
+
+	return regmap_update_bits(regmap, LGM_PWM_FAN_CON0, LGM_PWM_FAN_EN_MSK,
+				  enable ? LGM_PWM_FAN_EN_EN : LGM_PWM_FAN_EN_DIS);
+}
+
+static int lgm_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			 const struct pwm_state *state)
+{
+	struct lgm_pwm_chip *pc = to_lgm_pwm_chip(chip);
+	u32 duty_cycle, val;
+	int ret;
+
+	/* The hardware only supports normal polarity and fixed period. */
+	if (state->polarity != PWM_POLARITY_NORMAL || state->period < pc->period)
+		return -EINVAL;
+
+	if (!state->enabled)
+		return lgm_pwm_enable(chip, 0);
+
+	duty_cycle = min_t(u64, state->duty_cycle, pc->period);
+	val = duty_cycle * LGM_PWM_MAX_DUTY_CYCLE / pc->period;
+
+	ret = regmap_update_bits(pc->regmap, LGM_PWM_FAN_CON0, LGM_PWM_FAN_DC_MSK,
+				 FIELD_PREP(LGM_PWM_FAN_DC_MSK, val));
+	if (ret)
+		return ret;
+
+	return lgm_pwm_enable(chip, 1);
+}
+
+static int lgm_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+			     struct pwm_state *state)
+{
+	struct lgm_pwm_chip *pc = to_lgm_pwm_chip(chip);
+	u32 duty, val;
+
+	state->enabled = regmap_test_bits(pc->regmap, LGM_PWM_FAN_CON0,
+					  LGM_PWM_FAN_EN_EN);
+	state->polarity = PWM_POLARITY_NORMAL;
+	state->period = pc->period; /* fixed period */
+
+	regmap_read(pc->regmap, LGM_PWM_FAN_CON0, &val);
+	duty = FIELD_GET(LGM_PWM_FAN_DC_MSK, val);
+	state->duty_cycle = DIV_ROUND_UP(duty * pc->period, LGM_PWM_MAX_DUTY_CYCLE);
+
+	return 0;
+}
+
+static const struct pwm_ops lgm_pwm_ops = {
+	.get_state = lgm_pwm_get_state,
+	.apply = lgm_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static void lgm_pwm_init(struct lgm_pwm_chip *pc)
+{
+	struct regmap *regmap = pc->regmap;
+	u32 con0_val;
+
+	con0_val = FIELD_PREP(LGM_PWM_FAN_MODE_MSK, LGM_PWM_FAN_MODE_2WIRE);
+	pc->period = LGM_PWM_PERIOD_2WIRE_NS;
+	regmap_update_bits(regmap, LGM_PWM_FAN_CON1, LGM_PWM_FAN_MAX_RPM_MSK,
+			   LGM_PWM_DEFAULT_RPM);
+	regmap_update_bits(regmap, LGM_PWM_FAN_CON0, LGM_PWM_FAN_MODE_MSK,
+			   con0_val);
+}
+
+static const struct regmap_config lgm_pwm_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+};
+
+static void lgm_clk_release(void *data)
+{
+	struct clk *clk = data;
+
+	clk_disable_unprepare(clk);
+}
+
+static int lgm_clk_enable(struct device *dev, struct clk *clk)
+{
+	int ret;
+
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev, lgm_clk_release, clk);
+}
+
+static void lgm_reset_control_release(void *data)
+{
+	struct reset_control *rst = data;
+
+	reset_control_assert(rst);
+}
+
+static int lgm_reset_control_deassert(struct device *dev, struct reset_control *rst)
+{
+	int ret;
+
+	ret = reset_control_deassert(rst);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev, lgm_reset_control_release, rst);
+}
+
+static int lgm_pwm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct reset_control *rst;
+	struct lgm_pwm_chip *pc;
+	void __iomem *io_base;
+	struct clk *clk;
+	int ret;
+
+	pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
+	if (!pc)
+		return -ENOMEM;
+
+	io_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(io_base))
+		return PTR_ERR(io_base);
+
+	pc->regmap = devm_regmap_init_mmio(dev, io_base, &lgm_pwm_regmap_config);
+	if (IS_ERR(pc->regmap))
+		return dev_err_probe(dev, PTR_ERR(pc->regmap),
+				     "failed to init register map\n");
+
+	clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(clk))
+		return dev_err_probe(dev, PTR_ERR(clk), "failed to get clock\n");
+
+	ret = lgm_clk_enable(dev, clk);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to enable clock\n");
+
+	rst = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(rst))
+		return dev_err_probe(dev, PTR_ERR(rst),
+				     "failed to get reset control\n");
+
+	ret = lgm_reset_control_deassert(dev, rst);
+	if (ret)
+		return dev_err_probe(dev, ret, "cannot deassert reset control\n");
+
+	pc->chip.dev = dev;
+	pc->chip.ops = &lgm_pwm_ops;
+	pc->chip.npwm = 1;
+
+	lgm_pwm_init(pc);
+
+	ret = devm_pwmchip_add(dev, &pc->chip);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "failed to add PWM chip\n");
+
+	return 0;
+}
+
+static const struct of_device_id lgm_pwm_of_match[] = {
+	{ .compatible = "intel,lgm-pwm" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lgm_pwm_of_match);
+
+static struct platform_driver lgm_pwm_driver = {
+	.driver = {
+		.name = "intel-pwm",
+		.of_match_table = lgm_pwm_of_match,
+	},
+	.probe = lgm_pwm_probe,
+};
+module_platform_driver(lgm_pwm_driver);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-iqs620a.c b/drivers/pwm/pwm-iqs620a.c
new file mode 100644
index 000000000..aeb19a274
--- /dev/null
+++ b/drivers/pwm/pwm-iqs620a.c
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS620A PWM Generator
+ *
+ * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
+ *
+ * Limitations:
+ * - The period is fixed to 1 ms and is generated continuously despite changes
+ *   to the duty cycle or enable/disable state.
+ * - Changes to the duty cycle or enable/disable state take effect immediately
+ *   and may result in a glitch during the period in which the change is made.
+ * - The device cannot generate a 0% duty cycle. For duty cycles below 1 / 256
+ *   ms, the output is disabled and relies upon an external pull-down resistor
+ *   to hold the GPIO3/LTX pin low.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/mfd/iqs62x.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define IQS620_PWR_SETTINGS			0xd2
+#define IQS620_PWR_SETTINGS_PWM_OUT		BIT(7)
+
+#define IQS620_PWM_DUTY_CYCLE			0xd8
+
+#define IQS620_PWM_PERIOD_NS			1000000
+
+struct iqs620_pwm_private {
+	struct iqs62x_core *iqs62x;
+	struct pwm_chip chip;
+	struct notifier_block notifier;
+	struct mutex lock;
+	unsigned int duty_scale;
+};
+
+static int iqs620_pwm_init(struct iqs620_pwm_private *iqs620_pwm,
+			   unsigned int duty_scale)
+{
+	struct iqs62x_core *iqs62x = iqs620_pwm->iqs62x;
+	int ret;
+
+	if (!duty_scale)
+		return regmap_update_bits(iqs62x->regmap, IQS620_PWR_SETTINGS,
+					  IQS620_PWR_SETTINGS_PWM_OUT, 0);
+
+	ret = regmap_write(iqs62x->regmap, IQS620_PWM_DUTY_CYCLE,
+			   duty_scale - 1);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(iqs62x->regmap, IQS620_PWR_SETTINGS,
+				  IQS620_PWR_SETTINGS_PWM_OUT, 0xff);
+}
+
+static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			    const struct pwm_state *state)
+{
+	struct iqs620_pwm_private *iqs620_pwm;
+	unsigned int duty_cycle;
+	unsigned int duty_scale;
+	int ret;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (state->period < IQS620_PWM_PERIOD_NS)
+		return -EINVAL;
+
+	iqs620_pwm = container_of(chip, struct iqs620_pwm_private, chip);
+
+	/*
+	 * The duty cycle generated by the device is calculated as follows:
+	 *
+	 * duty_cycle = (IQS620_PWM_DUTY_CYCLE + 1) / 256 * 1 ms
+	 *
+	 * ...where IQS620_PWM_DUTY_CYCLE is a register value between 0 and 255
+	 * (inclusive). Therefore the lowest duty cycle the device can generate
+	 * while the output is enabled is 1 / 256 ms.
+	 *
+	 * For lower duty cycles (e.g. 0), the PWM output is simply disabled to
+	 * allow an external pull-down resistor to hold the GPIO3/LTX pin low.
+	 */
+	duty_cycle = min_t(u64, state->duty_cycle, IQS620_PWM_PERIOD_NS);
+	duty_scale = duty_cycle * 256 / IQS620_PWM_PERIOD_NS;
+
+	if (!state->enabled)
+		duty_scale = 0;
+
+	mutex_lock(&iqs620_pwm->lock);
+
+	ret = iqs620_pwm_init(iqs620_pwm, duty_scale);
+	if (!ret)
+		iqs620_pwm->duty_scale = duty_scale;
+
+	mutex_unlock(&iqs620_pwm->lock);
+
+	return ret;
+}
+
+static int iqs620_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+				struct pwm_state *state)
+{
+	struct iqs620_pwm_private *iqs620_pwm;
+
+	iqs620_pwm = container_of(chip, struct iqs620_pwm_private, chip);
+
+	mutex_lock(&iqs620_pwm->lock);
+
+	/*
+	 * Since the device cannot generate a 0% duty cycle, requests to do so
+	 * cause subsequent calls to iqs620_pwm_get_state to report the output
+	 * as disabled. This is not ideal, but is the best compromise based on
+	 * the capabilities of the device.
+	 */
+	state->enabled = iqs620_pwm->duty_scale > 0;
+	state->duty_cycle = DIV_ROUND_UP(iqs620_pwm->duty_scale *
+					 IQS620_PWM_PERIOD_NS, 256);
+
+	mutex_unlock(&iqs620_pwm->lock);
+
+	state->period = IQS620_PWM_PERIOD_NS;
+	state->polarity = PWM_POLARITY_NORMAL;
+
+	return 0;
+}
+
+static int iqs620_pwm_notifier(struct notifier_block *notifier,
+			       unsigned long event_flags, void *context)
+{
+	struct iqs620_pwm_private *iqs620_pwm;
+	int ret;
+
+	if (!(event_flags & BIT(IQS62X_EVENT_SYS_RESET)))
+		return NOTIFY_DONE;
+
+	iqs620_pwm = container_of(notifier, struct iqs620_pwm_private,
+				  notifier);
+
+	mutex_lock(&iqs620_pwm->lock);
+
+	/*
+	 * The parent MFD driver already prints an error message in the event
+	 * of a device reset, so nothing else is printed here unless there is
+	 * an additional failure.
+	 */
+	ret = iqs620_pwm_init(iqs620_pwm, iqs620_pwm->duty_scale);
+
+	mutex_unlock(&iqs620_pwm->lock);
+
+	if (ret) {
+		dev_err(iqs620_pwm->chip.dev,
+			"Failed to re-initialize device: %d\n", ret);
+		return NOTIFY_BAD;
+	}
+
+	return NOTIFY_OK;
+}
+
+static const struct pwm_ops iqs620_pwm_ops = {
+	.apply = iqs620_pwm_apply,
+	.get_state = iqs620_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static void iqs620_pwm_notifier_unregister(void *context)
+{
+	struct iqs620_pwm_private *iqs620_pwm = context;
+	int ret;
+
+	ret = blocking_notifier_chain_unregister(&iqs620_pwm->iqs62x->nh,
+						 &iqs620_pwm->notifier);
+	if (ret)
+		dev_err(iqs620_pwm->chip.dev,
+			"Failed to unregister notifier: %d\n", ret);
+}
+
+static int iqs620_pwm_probe(struct platform_device *pdev)
+{
+	struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
+	struct iqs620_pwm_private *iqs620_pwm;
+	unsigned int val;
+	int ret;
+
+	iqs620_pwm = devm_kzalloc(&pdev->dev, sizeof(*iqs620_pwm), GFP_KERNEL);
+	if (!iqs620_pwm)
+		return -ENOMEM;
+
+	iqs620_pwm->iqs62x = iqs62x;
+
+	ret = regmap_read(iqs62x->regmap, IQS620_PWR_SETTINGS, &val);
+	if (ret)
+		return ret;
+
+	if (val & IQS620_PWR_SETTINGS_PWM_OUT) {
+		ret = regmap_read(iqs62x->regmap, IQS620_PWM_DUTY_CYCLE, &val);
+		if (ret)
+			return ret;
+
+		iqs620_pwm->duty_scale = val + 1;
+	}
+
+	iqs620_pwm->chip.dev = &pdev->dev;
+	iqs620_pwm->chip.ops = &iqs620_pwm_ops;
+	iqs620_pwm->chip.npwm = 1;
+
+	mutex_init(&iqs620_pwm->lock);
+
+	iqs620_pwm->notifier.notifier_call = iqs620_pwm_notifier;
+	ret = blocking_notifier_chain_register(&iqs620_pwm->iqs62x->nh,
+					       &iqs620_pwm->notifier);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register notifier: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(&pdev->dev,
+				       iqs620_pwm_notifier_unregister,
+				       iqs620_pwm);
+	if (ret)
+		return ret;
+
+	ret = devm_pwmchip_add(&pdev->dev, &iqs620_pwm->chip);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to add device: %d\n", ret);
+
+	return ret;
+}
+
+static struct platform_driver iqs620_pwm_platform_driver = {
+	.driver = {
+		.name = "iqs620a-pwm",
+	},
+	.probe = iqs620_pwm_probe,
+};
+module_platform_driver(iqs620_pwm_platform_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS620A PWM Generator");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:iqs620a-pwm");
diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c
new file mode 100644
index 000000000..246499128
--- /dev/null
+++ b/drivers/pwm/pwm-jz4740.c
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 platform PWM support
+ *
+ * Limitations:
+ * - The .apply callback doesn't complete the currently running period before
+ *   reconfiguring the hardware.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/mfd/ingenic-tcu.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+
+struct soc_info {
+	unsigned int num_pwms;
+};
+
+struct jz4740_pwm_chip {
+	struct pwm_chip chip;
+	struct regmap *map;
+};
+
+static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip)
+{
+	return container_of(chip, struct jz4740_pwm_chip, chip);
+}
+
+static bool jz4740_pwm_can_use_chn(struct jz4740_pwm_chip *jz,
+				   unsigned int channel)
+{
+	/* Enable all TCU channels for PWM use by default except channels 0/1 */
+	u32 pwm_channels_mask = GENMASK(jz->chip.npwm - 1, 2);
+
+	device_property_read_u32(jz->chip.dev->parent,
+				 "ingenic,pwm-channels-mask",
+				 &pwm_channels_mask);
+
+	return !!(pwm_channels_mask & BIT(channel));
+}
+
+static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct jz4740_pwm_chip *jz = to_jz4740(chip);
+	struct clk *clk;
+	char name[16];
+	int err;
+
+	if (!jz4740_pwm_can_use_chn(jz, pwm->hwpwm))
+		return -EBUSY;
+
+	snprintf(name, sizeof(name), "timer%u", pwm->hwpwm);
+
+	clk = clk_get(chip->dev, name);
+	if (IS_ERR(clk)) {
+		dev_err(chip->dev, "error %pe: Failed to get clock\n", clk);
+		return PTR_ERR(clk);
+	}
+
+	err = clk_prepare_enable(clk);
+	if (err < 0) {
+		clk_put(clk);
+		return err;
+	}
+
+	pwm_set_chip_data(pwm, clk);
+
+	return 0;
+}
+
+static void jz4740_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct clk *clk = pwm_get_chip_data(pwm);
+
+	clk_disable_unprepare(clk);
+	clk_put(clk);
+}
+
+static int jz4740_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct jz4740_pwm_chip *jz = to_jz4740(chip);
+
+	/* Enable PWM output */
+	regmap_update_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm),
+			   TCU_TCSR_PWM_EN, TCU_TCSR_PWM_EN);
+
+	/* Start counter */
+	regmap_write(jz->map, TCU_REG_TESR, BIT(pwm->hwpwm));
+
+	return 0;
+}
+
+static void jz4740_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct jz4740_pwm_chip *jz = to_jz4740(chip);
+
+	/*
+	 * Set duty > period. This trick allows the TCU channels in TCU2 mode to
+	 * properly return to their init level.
+	 */
+	regmap_write(jz->map, TCU_REG_TDHRc(pwm->hwpwm), 0xffff);
+	regmap_write(jz->map, TCU_REG_TDFRc(pwm->hwpwm), 0x0);
+
+	/*
+	 * Disable PWM output.
+	 * In TCU2 mode (channel 1/2 on JZ4750+), this must be done before the
+	 * counter is stopped, while in TCU1 mode the order does not matter.
+	 */
+	regmap_update_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm),
+			   TCU_TCSR_PWM_EN, 0);
+
+	/* Stop counter */
+	regmap_write(jz->map, TCU_REG_TECR, BIT(pwm->hwpwm));
+}
+
+static int jz4740_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			    const struct pwm_state *state)
+{
+	struct jz4740_pwm_chip *jz4740 = to_jz4740(pwm->chip);
+	unsigned long long tmp = 0xffffull * NSEC_PER_SEC;
+	struct clk *clk = pwm_get_chip_data(pwm);
+	unsigned long period, duty;
+	long rate;
+	int err;
+
+	/*
+	 * Limit the clock to a maximum rate that still gives us a period value
+	 * which fits in 16 bits.
+	 */
+	do_div(tmp, state->period);
+
+	/*
+	 * /!\ IMPORTANT NOTE:
+	 * -------------------
+	 * This code relies on the fact that clk_round_rate() will always round
+	 * down, which is not a valid assumption given by the clk API, but only
+	 * happens to be true with the clk drivers used for Ingenic SoCs.
+	 *
+	 * Right now, there is no alternative as the clk API does not have a
+	 * round-down function (and won't have one for a while), but if it ever
+	 * comes to light, a round-down function should be used instead.
+	 */
+	rate = clk_round_rate(clk, tmp);
+	if (rate < 0) {
+		dev_err(chip->dev, "Unable to round rate: %ld", rate);
+		return rate;
+	}
+
+	/* Calculate period value */
+	tmp = (unsigned long long)rate * state->period;
+	do_div(tmp, NSEC_PER_SEC);
+	period = tmp;
+
+	/* Calculate duty value */
+	tmp = (unsigned long long)rate * state->duty_cycle;
+	do_div(tmp, NSEC_PER_SEC);
+	duty = tmp;
+
+	if (duty >= period)
+		duty = period - 1;
+
+	jz4740_pwm_disable(chip, pwm);
+
+	err = clk_set_rate(clk, rate);
+	if (err) {
+		dev_err(chip->dev, "Unable to set rate: %d", err);
+		return err;
+	}
+
+	/* Reset counter to 0 */
+	regmap_write(jz4740->map, TCU_REG_TCNTc(pwm->hwpwm), 0);
+
+	/* Set duty */
+	regmap_write(jz4740->map, TCU_REG_TDHRc(pwm->hwpwm), duty);
+
+	/* Set period */
+	regmap_write(jz4740->map, TCU_REG_TDFRc(pwm->hwpwm), period);
+
+	/* Set abrupt shutdown */
+	regmap_update_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm),
+			   TCU_TCSR_PWM_SD, TCU_TCSR_PWM_SD);
+
+	/*
+	 * Set polarity.
+	 *
+	 * The PWM starts in inactive state until the internal timer reaches the
+	 * duty value, then becomes active until the timer reaches the period
+	 * value. In theory, we should then use (period - duty) as the real duty
+	 * value, as a high duty value would otherwise result in the PWM pin
+	 * being inactive most of the time.
+	 *
+	 * Here, we don't do that, and instead invert the polarity of the PWM
+	 * when it is active. This trick makes the PWM start with its active
+	 * state instead of its inactive state.
+	 */
+	if ((state->polarity == PWM_POLARITY_NORMAL) ^ state->enabled)
+		regmap_update_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm),
+				   TCU_TCSR_PWM_INITL_HIGH, 0);
+	else
+		regmap_update_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm),
+				   TCU_TCSR_PWM_INITL_HIGH,
+				   TCU_TCSR_PWM_INITL_HIGH);
+
+	if (state->enabled)
+		jz4740_pwm_enable(chip, pwm);
+
+	return 0;
+}
+
+static const struct pwm_ops jz4740_pwm_ops = {
+	.request = jz4740_pwm_request,
+	.free = jz4740_pwm_free,
+	.apply = jz4740_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static int jz4740_pwm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct jz4740_pwm_chip *jz4740;
+	const struct soc_info *info;
+
+	info = device_get_match_data(dev);
+	if (!info)
+		return -EINVAL;
+
+	jz4740 = devm_kzalloc(dev, sizeof(*jz4740), GFP_KERNEL);
+	if (!jz4740)
+		return -ENOMEM;
+
+	jz4740->map = device_node_to_regmap(dev->parent->of_node);
+	if (IS_ERR(jz4740->map)) {
+		dev_err(dev, "regmap not found: %ld\n", PTR_ERR(jz4740->map));
+		return PTR_ERR(jz4740->map);
+	}
+
+	jz4740->chip.dev = dev;
+	jz4740->chip.ops = &jz4740_pwm_ops;
+	jz4740->chip.npwm = info->num_pwms;
+
+	return devm_pwmchip_add(dev, &jz4740->chip);
+}
+
+static const struct soc_info __maybe_unused jz4740_soc_info = {
+	.num_pwms = 8,
+};
+
+static const struct soc_info __maybe_unused jz4725b_soc_info = {
+	.num_pwms = 6,
+};
+
+static const struct soc_info __maybe_unused x1000_soc_info = {
+	.num_pwms = 5,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id jz4740_pwm_dt_ids[] = {
+	{ .compatible = "ingenic,jz4740-pwm", .data = &jz4740_soc_info },
+	{ .compatible = "ingenic,jz4725b-pwm", .data = &jz4725b_soc_info },
+	{ .compatible = "ingenic,x1000-pwm", .data = &x1000_soc_info },
+	{},
+};
+MODULE_DEVICE_TABLE(of, jz4740_pwm_dt_ids);
+#endif
+
+static struct platform_driver jz4740_pwm_driver = {
+	.driver = {
+		.name = "jz4740-pwm",
+		.of_match_table = of_match_ptr(jz4740_pwm_dt_ids),
+	},
+	.probe = jz4740_pwm_probe,
+};
+module_platform_driver(jz4740_pwm_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Ingenic JZ4740 PWM driver");
+MODULE_ALIAS("platform:jz4740-pwm");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-keembay.c b/drivers/pwm/pwm-keembay.c
new file mode 100644
index 000000000..ac02d8bb4
--- /dev/null
+++ b/drivers/pwm/pwm-keembay.c
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Keem Bay PWM driver
+ *
+ * Copyright (C) 2020 Intel Corporation
+ * Authors: Lai Poey Seng <poey.seng.lai@intel.com>
+ *          Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
+ *
+ * Limitations:
+ * - Upon disabling a channel, the currently running
+ *   period will not be completed. However, upon
+ *   reconfiguration of the duty cycle/period, the
+ *   currently running period will be completed first.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+
+#define KMB_TOTAL_PWM_CHANNELS		6
+#define KMB_PWM_COUNT_MAX		U16_MAX
+#define KMB_PWM_EN_BIT			BIT(31)
+
+/* Mask */
+#define KMB_PWM_HIGH_MASK		GENMASK(31, 16)
+#define KMB_PWM_LOW_MASK		GENMASK(15, 0)
+#define KMB_PWM_LEADIN_MASK		GENMASK(30, 0)
+
+/* PWM Register offset */
+#define KMB_PWM_LEADIN_OFFSET(ch)	(0x00 + 4 * (ch))
+#define KMB_PWM_HIGHLOW_OFFSET(ch)	(0x20 + 4 * (ch))
+
+struct keembay_pwm {
+	struct pwm_chip chip;
+	struct device *dev;
+	struct clk *clk;
+	void __iomem *base;
+};
+
+static inline struct keembay_pwm *to_keembay_pwm_dev(struct pwm_chip *chip)
+{
+	return container_of(chip, struct keembay_pwm, chip);
+}
+
+static void keembay_clk_unprepare(void *data)
+{
+	clk_disable_unprepare(data);
+}
+
+static int keembay_clk_enable(struct device *dev, struct clk *clk)
+{
+	int ret;
+
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev, keembay_clk_unprepare, clk);
+}
+
+/*
+ * With gcc 10, CONFIG_CC_OPTIMIZE_FOR_SIZE and only "inline" instead of
+ * "__always_inline" this fails to compile because the compiler doesn't notice
+ * for all valid masks (e.g. KMB_PWM_LEADIN_MASK) that they are ok.
+ */
+static __always_inline void keembay_pwm_update_bits(struct keembay_pwm *priv, u32 mask,
+					   u32 val, u32 offset)
+{
+	u32 buff = readl(priv->base + offset);
+
+	buff = u32_replace_bits(buff, val, mask);
+	writel(buff, priv->base + offset);
+}
+
+static void keembay_pwm_enable(struct keembay_pwm *priv, int ch)
+{
+	keembay_pwm_update_bits(priv, KMB_PWM_EN_BIT, 1,
+				KMB_PWM_LEADIN_OFFSET(ch));
+}
+
+static void keembay_pwm_disable(struct keembay_pwm *priv, int ch)
+{
+	keembay_pwm_update_bits(priv, KMB_PWM_EN_BIT, 0,
+				KMB_PWM_LEADIN_OFFSET(ch));
+}
+
+static int keembay_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+				 struct pwm_state *state)
+{
+	struct keembay_pwm *priv = to_keembay_pwm_dev(chip);
+	unsigned long long high, low;
+	unsigned long clk_rate;
+	u32 highlow;
+
+	clk_rate = clk_get_rate(priv->clk);
+
+	/* Read channel enabled status */
+	highlow = readl(priv->base + KMB_PWM_LEADIN_OFFSET(pwm->hwpwm));
+	if (highlow & KMB_PWM_EN_BIT)
+		state->enabled = true;
+	else
+		state->enabled = false;
+
+	/* Read period and duty cycle */
+	highlow = readl(priv->base + KMB_PWM_HIGHLOW_OFFSET(pwm->hwpwm));
+	low = FIELD_GET(KMB_PWM_LOW_MASK, highlow) * NSEC_PER_SEC;
+	high = FIELD_GET(KMB_PWM_HIGH_MASK, highlow) * NSEC_PER_SEC;
+	state->duty_cycle = DIV_ROUND_UP_ULL(high, clk_rate);
+	state->period = DIV_ROUND_UP_ULL(high + low, clk_rate);
+	state->polarity = PWM_POLARITY_NORMAL;
+
+	return 0;
+}
+
+static int keembay_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			     const struct pwm_state *state)
+{
+	struct keembay_pwm *priv = to_keembay_pwm_dev(chip);
+	struct pwm_state current_state;
+	unsigned long long div;
+	unsigned long clk_rate;
+	u32 pwm_count = 0;
+	u16 high, low;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	/*
+	 * Configure the pwm repeat count as infinite at (15:0) and leadin
+	 * low time as 0 at (30:16), which is in terms of clock cycles.
+	 */
+	keembay_pwm_update_bits(priv, KMB_PWM_LEADIN_MASK, 0,
+				KMB_PWM_LEADIN_OFFSET(pwm->hwpwm));
+
+	keembay_pwm_get_state(chip, pwm, &current_state);
+
+	if (!state->enabled) {
+		if (current_state.enabled)
+			keembay_pwm_disable(priv, pwm->hwpwm);
+		return 0;
+	}
+
+	/*
+	 * The upper 16 bits and lower 16 bits of the KMB_PWM_HIGHLOW_OFFSET
+	 * register contain the high time and low time of waveform accordingly.
+	 * All the values are in terms of clock cycles.
+	 */
+
+	clk_rate = clk_get_rate(priv->clk);
+	div = clk_rate * state->duty_cycle;
+	div = DIV_ROUND_DOWN_ULL(div, NSEC_PER_SEC);
+	if (div > KMB_PWM_COUNT_MAX)
+		return -ERANGE;
+
+	high = div;
+	div = clk_rate * state->period;
+	div = DIV_ROUND_DOWN_ULL(div, NSEC_PER_SEC);
+	div = div - high;
+	if (div > KMB_PWM_COUNT_MAX)
+		return -ERANGE;
+
+	low = div;
+
+	pwm_count = FIELD_PREP(KMB_PWM_HIGH_MASK, high) |
+		    FIELD_PREP(KMB_PWM_LOW_MASK, low);
+
+	writel(pwm_count, priv->base + KMB_PWM_HIGHLOW_OFFSET(pwm->hwpwm));
+
+	if (state->enabled && !current_state.enabled)
+		keembay_pwm_enable(priv, pwm->hwpwm);
+
+	return 0;
+}
+
+static const struct pwm_ops keembay_pwm_ops = {
+	.owner = THIS_MODULE,
+	.apply = keembay_pwm_apply,
+	.get_state = keembay_pwm_get_state,
+};
+
+static int keembay_pwm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct keembay_pwm *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk))
+		return dev_err_probe(dev, PTR_ERR(priv->clk), "Failed to get clock\n");
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	ret = keembay_clk_enable(dev, priv->clk);
+	if (ret)
+		return ret;
+
+	priv->chip.dev = dev;
+	priv->chip.ops = &keembay_pwm_ops;
+	priv->chip.npwm = KMB_TOTAL_PWM_CHANNELS;
+
+	ret = devm_pwmchip_add(dev, &priv->chip);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to add PWM chip\n");
+
+	return 0;
+}
+
+static const struct of_device_id keembay_pwm_of_match[] = {
+	{ .compatible = "intel,keembay-pwm" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, keembay_pwm_of_match);
+
+static struct platform_driver keembay_pwm_driver = {
+	.probe	= keembay_pwm_probe,
+	.driver	= {
+		.name = "pwm-keembay",
+		.of_match_table = keembay_pwm_of_match,
+	},
+};
+module_platform_driver(keembay_pwm_driver);
+
+MODULE_ALIAS("platform:pwm-keembay");
+MODULE_DESCRIPTION("Intel Keem Bay PWM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-lp3943.c b/drivers/pwm/pwm-lp3943.c
new file mode 100644
index 000000000..215ef9069
--- /dev/null
+++ b/drivers/pwm/pwm-lp3943.c
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TI/National Semiconductor LP3943 PWM driver
+ *
+ * Copyright 2013 Texas Instruments
+ *
+ * Author: Milo Kim <milo.kim@ti.com>
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/mfd/lp3943.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+#define LP3943_MAX_DUTY			255
+#define LP3943_MIN_PERIOD		6250
+#define LP3943_MAX_PERIOD		1600000
+
+struct lp3943_pwm {
+	struct pwm_chip chip;
+	struct lp3943 *lp3943;
+	struct lp3943_platform_data *pdata;
+};
+
+static inline struct lp3943_pwm *to_lp3943_pwm(struct pwm_chip *_chip)
+{
+	return container_of(_chip, struct lp3943_pwm, chip);
+}
+
+static struct lp3943_pwm_map *
+lp3943_pwm_request_map(struct lp3943_pwm *lp3943_pwm, int hwpwm)
+{
+	struct lp3943_platform_data *pdata = lp3943_pwm->pdata;
+	struct lp3943 *lp3943 = lp3943_pwm->lp3943;
+	struct lp3943_pwm_map *pwm_map;
+	int i, offset;
+
+	pwm_map = kzalloc(sizeof(*pwm_map), GFP_KERNEL);
+	if (!pwm_map)
+		return ERR_PTR(-ENOMEM);
+
+	pwm_map->output = pdata->pwms[hwpwm]->output;
+	pwm_map->num_outputs = pdata->pwms[hwpwm]->num_outputs;
+
+	for (i = 0; i < pwm_map->num_outputs; i++) {
+		offset = pwm_map->output[i];
+
+		/* Return an error if the pin is already assigned */
+		if (test_and_set_bit(offset, &lp3943->pin_used)) {
+			kfree(pwm_map);
+			return ERR_PTR(-EBUSY);
+		}
+	}
+
+	return pwm_map;
+}
+
+static int lp3943_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
+	struct lp3943_pwm_map *pwm_map;
+
+	pwm_map = lp3943_pwm_request_map(lp3943_pwm, pwm->hwpwm);
+	if (IS_ERR(pwm_map))
+		return PTR_ERR(pwm_map);
+
+	return pwm_set_chip_data(pwm, pwm_map);
+}
+
+static void lp3943_pwm_free_map(struct lp3943_pwm *lp3943_pwm,
+				struct lp3943_pwm_map *pwm_map)
+{
+	struct lp3943 *lp3943 = lp3943_pwm->lp3943;
+	int i, offset;
+
+	for (i = 0; i < pwm_map->num_outputs; i++) {
+		offset = pwm_map->output[i];
+		clear_bit(offset, &lp3943->pin_used);
+	}
+
+	kfree(pwm_map);
+}
+
+static void lp3943_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
+	struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm);
+
+	lp3943_pwm_free_map(lp3943_pwm, pwm_map);
+}
+
+static int lp3943_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			     u64 duty_ns, u64 period_ns)
+{
+	struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
+	struct lp3943 *lp3943 = lp3943_pwm->lp3943;
+	u8 val, reg_duty, reg_prescale;
+	int err;
+
+	/*
+	 * How to configure the LP3943 PWMs
+	 *
+	 * 1) Period = 6250 ~ 1600000
+	 * 2) Prescale = period / 6250 -1
+	 * 3) Duty = input duty
+	 *
+	 * Prescale and duty are register values
+	 */
+
+	if (pwm->hwpwm == 0) {
+		reg_prescale = LP3943_REG_PRESCALE0;
+		reg_duty     = LP3943_REG_PWM0;
+	} else {
+		reg_prescale = LP3943_REG_PRESCALE1;
+		reg_duty     = LP3943_REG_PWM1;
+	}
+
+	/*
+	 * Note that after this clamping, period_ns fits into an int. This is
+	 * helpful because we can resort to integer division below instead of
+	 * the (more expensive) 64 bit division.
+	 */
+	period_ns = clamp(period_ns, (u64)LP3943_MIN_PERIOD, (u64)LP3943_MAX_PERIOD);
+	val       = (u8)((int)period_ns / LP3943_MIN_PERIOD - 1);
+
+	err = lp3943_write_byte(lp3943, reg_prescale, val);
+	if (err)
+		return err;
+
+	duty_ns = min(duty_ns, period_ns);
+	val = (u8)((int)duty_ns * LP3943_MAX_DUTY / (int)period_ns);
+
+	return lp3943_write_byte(lp3943, reg_duty, val);
+}
+
+static int lp3943_pwm_set_mode(struct lp3943_pwm *lp3943_pwm,
+			       struct lp3943_pwm_map *pwm_map,
+			       u8 val)
+{
+	struct lp3943 *lp3943 = lp3943_pwm->lp3943;
+	const struct lp3943_reg_cfg *mux = lp3943->mux_cfg;
+	int i, index, err;
+
+	for (i = 0; i < pwm_map->num_outputs; i++) {
+		index = pwm_map->output[i];
+		err = lp3943_update_bits(lp3943, mux[index].reg,
+					 mux[index].mask,
+					 val << mux[index].shift);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int lp3943_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
+	struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm);
+	u8 val;
+
+	if (pwm->hwpwm == 0)
+		val = LP3943_DIM_PWM0;
+	else
+		val = LP3943_DIM_PWM1;
+
+	/*
+	 * Each PWM generator is set to control any of outputs of LP3943.
+	 * To enable/disable the PWM, these output pins should be configured.
+	 */
+
+	return lp3943_pwm_set_mode(lp3943_pwm, pwm_map, val);
+}
+
+static void lp3943_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
+	struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm);
+
+	/*
+	 * LP3943 outputs are open-drain, so the pin should be configured
+	 * when the PWM is disabled.
+	 */
+
+	lp3943_pwm_set_mode(lp3943_pwm, pwm_map, LP3943_GPIO_OUT_HIGH);
+}
+
+static int lp3943_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			    const struct pwm_state *state)
+{
+	int err;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		if (pwm->state.enabled)
+			lp3943_pwm_disable(chip, pwm);
+		return 0;
+	}
+
+	err = lp3943_pwm_config(chip, pwm, state->duty_cycle, state->period);
+	if (err)
+		return err;
+
+	if (!pwm->state.enabled)
+		err = lp3943_pwm_enable(chip, pwm);
+
+	return err;
+}
+
+static const struct pwm_ops lp3943_pwm_ops = {
+	.request	= lp3943_pwm_request,
+	.free		= lp3943_pwm_free,
+	.apply		= lp3943_pwm_apply,
+	.owner		= THIS_MODULE,
+};
+
+static int lp3943_pwm_parse_dt(struct device *dev,
+			       struct lp3943_pwm *lp3943_pwm)
+{
+	static const char * const name[] = { "ti,pwm0", "ti,pwm1", };
+	struct device_node *node = dev->of_node;
+	struct lp3943_platform_data *pdata;
+	struct lp3943_pwm_map *pwm_map;
+	enum lp3943_pwm_output *output;
+	int i, err, proplen, count = 0;
+	u32 num_outputs;
+
+	if (!node)
+		return -EINVAL;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	/*
+	 * Read the output map configuration from the device tree.
+	 * Each of the two PWM generators can drive zero or more outputs.
+	 */
+
+	for (i = 0; i < LP3943_NUM_PWMS; i++) {
+		if (!of_get_property(node, name[i], &proplen))
+			continue;
+
+		num_outputs = proplen / sizeof(u32);
+		if (num_outputs == 0)
+			continue;
+
+		output = devm_kcalloc(dev, num_outputs, sizeof(*output),
+				      GFP_KERNEL);
+		if (!output)
+			return -ENOMEM;
+
+		err = of_property_read_u32_array(node, name[i], output,
+						 num_outputs);
+		if (err)
+			return err;
+
+		pwm_map = devm_kzalloc(dev, sizeof(*pwm_map), GFP_KERNEL);
+		if (!pwm_map)
+			return -ENOMEM;
+
+		pwm_map->output = output;
+		pwm_map->num_outputs = num_outputs;
+		pdata->pwms[i] = pwm_map;
+
+		count++;
+	}
+
+	if (count == 0)
+		return -ENODATA;
+
+	lp3943_pwm->pdata = pdata;
+	return 0;
+}
+
+static int lp3943_pwm_probe(struct platform_device *pdev)
+{
+	struct lp3943 *lp3943 = dev_get_drvdata(pdev->dev.parent);
+	struct lp3943_pwm *lp3943_pwm;
+	int ret;
+
+	lp3943_pwm = devm_kzalloc(&pdev->dev, sizeof(*lp3943_pwm), GFP_KERNEL);
+	if (!lp3943_pwm)
+		return -ENOMEM;
+
+	lp3943_pwm->pdata = lp3943->pdata;
+	if (!lp3943_pwm->pdata) {
+		if (IS_ENABLED(CONFIG_OF))
+			ret = lp3943_pwm_parse_dt(&pdev->dev, lp3943_pwm);
+		else
+			ret = -ENODEV;
+
+		if (ret)
+			return ret;
+	}
+
+	lp3943_pwm->lp3943 = lp3943;
+	lp3943_pwm->chip.dev = &pdev->dev;
+	lp3943_pwm->chip.ops = &lp3943_pwm_ops;
+	lp3943_pwm->chip.npwm = LP3943_NUM_PWMS;
+
+	return devm_pwmchip_add(&pdev->dev, &lp3943_pwm->chip);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id lp3943_pwm_of_match[] = {
+	{ .compatible = "ti,lp3943-pwm", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lp3943_pwm_of_match);
+#endif
+
+static struct platform_driver lp3943_pwm_driver = {
+	.probe = lp3943_pwm_probe,
+	.driver = {
+		.name = "lp3943-pwm",
+		.of_match_table = of_match_ptr(lp3943_pwm_of_match),
+	},
+};
+module_platform_driver(lp3943_pwm_driver);
+
+MODULE_DESCRIPTION("LP3943 PWM driver");
+MODULE_ALIAS("platform:lp3943-pwm");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-lpc18xx-sct.c b/drivers/pwm/pwm-lpc18xx-sct.c
new file mode 100644
index 000000000..763f2e3a1
--- /dev/null
+++ b/drivers/pwm/pwm-lpc18xx-sct.c
@@ -0,0 +1,480 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * NXP LPC18xx State Configurable Timer - Pulse Width Modulator driver
+ *
+ * Copyright (c) 2015 Ariel D'Alessandro <ariel@vanguardiasur.com>
+ *
+ * Notes
+ * =====
+ * NXP LPC18xx provides a State Configurable Timer (SCT) which can be configured
+ * as a Pulse Width Modulator.
+ *
+ * SCT supports 16 outputs, 16 events and 16 registers. Each event will be
+ * triggered when its related register matches the SCT counter value, and it
+ * will set or clear a selected output.
+ *
+ * One of the events is preselected to generate the period, thus the maximum
+ * number of simultaneous channels is limited to 15. Notice that period is
+ * global to all the channels, thus PWM driver will refuse setting different
+ * values to it, unless there's only one channel requested.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+/* LPC18xx SCT registers */
+#define LPC18XX_PWM_CONFIG		0x000
+#define LPC18XX_PWM_CONFIG_UNIFY	BIT(0)
+#define LPC18XX_PWM_CONFIG_NORELOAD	BIT(7)
+
+#define LPC18XX_PWM_CTRL		0x004
+#define LPC18XX_PWM_CTRL_HALT		BIT(2)
+#define LPC18XX_PWM_BIDIR		BIT(4)
+#define LPC18XX_PWM_PRE_SHIFT		5
+#define LPC18XX_PWM_PRE_MASK		(0xff << LPC18XX_PWM_PRE_SHIFT)
+#define LPC18XX_PWM_PRE(x)		(x << LPC18XX_PWM_PRE_SHIFT)
+
+#define LPC18XX_PWM_LIMIT		0x008
+
+#define LPC18XX_PWM_RES_BASE		0x058
+#define LPC18XX_PWM_RES_SHIFT(_ch)	(_ch * 2)
+#define LPC18XX_PWM_RES(_ch, _action)	(_action << LPC18XX_PWM_RES_SHIFT(_ch))
+#define LPC18XX_PWM_RES_MASK(_ch)	(0x3 << LPC18XX_PWM_RES_SHIFT(_ch))
+
+#define LPC18XX_PWM_MATCH_BASE		0x100
+#define LPC18XX_PWM_MATCH(_ch)		(LPC18XX_PWM_MATCH_BASE + _ch * 4)
+
+#define LPC18XX_PWM_MATCHREL_BASE	0x200
+#define LPC18XX_PWM_MATCHREL(_ch)	(LPC18XX_PWM_MATCHREL_BASE + _ch * 4)
+
+#define LPC18XX_PWM_EVSTATEMSK_BASE	0x300
+#define LPC18XX_PWM_EVSTATEMSK(_ch)	(LPC18XX_PWM_EVSTATEMSK_BASE + _ch * 8)
+#define LPC18XX_PWM_EVSTATEMSK_ALL	0xffffffff
+
+#define LPC18XX_PWM_EVCTRL_BASE		0x304
+#define LPC18XX_PWM_EVCTRL(_ev)		(LPC18XX_PWM_EVCTRL_BASE + _ev * 8)
+
+#define LPC18XX_PWM_EVCTRL_MATCH(_ch)	_ch
+
+#define LPC18XX_PWM_EVCTRL_COMB_SHIFT	12
+#define LPC18XX_PWM_EVCTRL_COMB_MATCH	(0x1 << LPC18XX_PWM_EVCTRL_COMB_SHIFT)
+
+#define LPC18XX_PWM_OUTPUTSET_BASE	0x500
+#define LPC18XX_PWM_OUTPUTSET(_ch)	(LPC18XX_PWM_OUTPUTSET_BASE + _ch * 8)
+
+#define LPC18XX_PWM_OUTPUTCL_BASE	0x504
+#define LPC18XX_PWM_OUTPUTCL(_ch)	(LPC18XX_PWM_OUTPUTCL_BASE + _ch * 8)
+
+/* LPC18xx SCT unified counter */
+#define LPC18XX_PWM_TIMER_MAX		0xffffffff
+
+/* LPC18xx SCT events */
+#define LPC18XX_PWM_EVENT_PERIOD	0
+#define LPC18XX_PWM_EVENT_MAX		16
+
+#define LPC18XX_NUM_PWMS		16
+
+/* SCT conflict resolution */
+enum lpc18xx_pwm_res_action {
+	LPC18XX_PWM_RES_NONE,
+	LPC18XX_PWM_RES_SET,
+	LPC18XX_PWM_RES_CLEAR,
+	LPC18XX_PWM_RES_TOGGLE,
+};
+
+struct lpc18xx_pwm_data {
+	unsigned int duty_event;
+};
+
+struct lpc18xx_pwm_chip {
+	struct device *dev;
+	struct pwm_chip chip;
+	void __iomem *base;
+	struct clk *pwm_clk;
+	unsigned long clk_rate;
+	unsigned int period_ns;
+	unsigned int min_period_ns;
+	u64 max_period_ns;
+	unsigned int period_event;
+	unsigned long event_map;
+	struct mutex res_lock;
+	struct mutex period_lock;
+	struct lpc18xx_pwm_data channeldata[LPC18XX_NUM_PWMS];
+};
+
+static inline struct lpc18xx_pwm_chip *
+to_lpc18xx_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct lpc18xx_pwm_chip, chip);
+}
+
+static inline void lpc18xx_pwm_writel(struct lpc18xx_pwm_chip *lpc18xx_pwm,
+				      u32 reg, u32 val)
+{
+	writel(val, lpc18xx_pwm->base + reg);
+}
+
+static inline u32 lpc18xx_pwm_readl(struct lpc18xx_pwm_chip *lpc18xx_pwm,
+				    u32 reg)
+{
+	return readl(lpc18xx_pwm->base + reg);
+}
+
+static void lpc18xx_pwm_set_conflict_res(struct lpc18xx_pwm_chip *lpc18xx_pwm,
+					 struct pwm_device *pwm,
+					 enum lpc18xx_pwm_res_action action)
+{
+	u32 val;
+
+	mutex_lock(&lpc18xx_pwm->res_lock);
+
+	/*
+	 * Simultaneous set and clear may happen on an output, that is the case
+	 * when duty_ns == period_ns. LPC18xx SCT allows to set a conflict
+	 * resolution action to be taken in such a case.
+	 */
+	val = lpc18xx_pwm_readl(lpc18xx_pwm, LPC18XX_PWM_RES_BASE);
+	val &= ~LPC18XX_PWM_RES_MASK(pwm->hwpwm);
+	val |= LPC18XX_PWM_RES(pwm->hwpwm, action);
+	lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_RES_BASE, val);
+
+	mutex_unlock(&lpc18xx_pwm->res_lock);
+}
+
+static void lpc18xx_pwm_config_period(struct pwm_chip *chip, u64 period_ns)
+{
+	struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
+	u32 val;
+
+	/*
+	 * With clk_rate < NSEC_PER_SEC this cannot overflow.
+	 * With period_ns < max_period_ns this also fits into an u32.
+	 * As period_ns >= min_period_ns = DIV_ROUND_UP(NSEC_PER_SEC, lpc18xx_pwm->clk_rate);
+	 * we have val >= 1.
+	 */
+	val = mul_u64_u64_div_u64(period_ns, lpc18xx_pwm->clk_rate, NSEC_PER_SEC);
+
+	lpc18xx_pwm_writel(lpc18xx_pwm,
+			   LPC18XX_PWM_MATCH(lpc18xx_pwm->period_event),
+			   val - 1);
+
+	lpc18xx_pwm_writel(lpc18xx_pwm,
+			   LPC18XX_PWM_MATCHREL(lpc18xx_pwm->period_event),
+			   val - 1);
+}
+
+static void lpc18xx_pwm_config_duty(struct pwm_chip *chip,
+				    struct pwm_device *pwm, u64 duty_ns)
+{
+	struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
+	struct lpc18xx_pwm_data *lpc18xx_data = &lpc18xx_pwm->channeldata[pwm->hwpwm];
+	u32 val;
+
+	/*
+	 * With clk_rate < NSEC_PER_SEC this cannot overflow.
+	 * With duty_ns <= period_ns < max_period_ns this also fits into an u32.
+	 */
+	val = mul_u64_u64_div_u64(duty_ns, lpc18xx_pwm->clk_rate, NSEC_PER_SEC);
+
+	lpc18xx_pwm_writel(lpc18xx_pwm,
+			   LPC18XX_PWM_MATCH(lpc18xx_data->duty_event),
+			   val);
+
+	lpc18xx_pwm_writel(lpc18xx_pwm,
+			   LPC18XX_PWM_MATCHREL(lpc18xx_data->duty_event),
+			   val);
+}
+
+static int lpc18xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			      int duty_ns, int period_ns)
+{
+	struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
+	int requested_events, i;
+
+	if (period_ns < lpc18xx_pwm->min_period_ns ||
+	    period_ns > lpc18xx_pwm->max_period_ns) {
+		dev_err(chip->dev, "period %d not in range\n", period_ns);
+		return -ERANGE;
+	}
+
+	mutex_lock(&lpc18xx_pwm->period_lock);
+
+	requested_events = bitmap_weight(&lpc18xx_pwm->event_map,
+					 LPC18XX_PWM_EVENT_MAX);
+
+	/*
+	 * The PWM supports only a single period for all PWM channels.
+	 * Once the period is set, it can only be changed if no more than one
+	 * channel is requested at that moment.
+	 */
+	if (requested_events > 2 && lpc18xx_pwm->period_ns != period_ns &&
+	    lpc18xx_pwm->period_ns) {
+		dev_err(chip->dev, "conflicting period requested for PWM %u\n",
+			pwm->hwpwm);
+		mutex_unlock(&lpc18xx_pwm->period_lock);
+		return -EBUSY;
+	}
+
+	if ((requested_events <= 2 && lpc18xx_pwm->period_ns != period_ns) ||
+	    !lpc18xx_pwm->period_ns) {
+		lpc18xx_pwm->period_ns = period_ns;
+		for (i = 0; i < chip->npwm; i++)
+			pwm_set_period(&chip->pwms[i], period_ns);
+		lpc18xx_pwm_config_period(chip, period_ns);
+	}
+
+	mutex_unlock(&lpc18xx_pwm->period_lock);
+
+	lpc18xx_pwm_config_duty(chip, pwm, duty_ns);
+
+	return 0;
+}
+
+static int lpc18xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm, enum pwm_polarity polarity)
+{
+	struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
+	struct lpc18xx_pwm_data *lpc18xx_data = &lpc18xx_pwm->channeldata[pwm->hwpwm];
+	enum lpc18xx_pwm_res_action res_action;
+	unsigned int set_event, clear_event;
+
+	lpc18xx_pwm_writel(lpc18xx_pwm,
+			   LPC18XX_PWM_EVCTRL(lpc18xx_data->duty_event),
+			   LPC18XX_PWM_EVCTRL_MATCH(lpc18xx_data->duty_event) |
+			   LPC18XX_PWM_EVCTRL_COMB_MATCH);
+
+	lpc18xx_pwm_writel(lpc18xx_pwm,
+			   LPC18XX_PWM_EVSTATEMSK(lpc18xx_data->duty_event),
+			   LPC18XX_PWM_EVSTATEMSK_ALL);
+
+	if (polarity == PWM_POLARITY_NORMAL) {
+		set_event = lpc18xx_pwm->period_event;
+		clear_event = lpc18xx_data->duty_event;
+		res_action = LPC18XX_PWM_RES_SET;
+	} else {
+		set_event = lpc18xx_data->duty_event;
+		clear_event = lpc18xx_pwm->period_event;
+		res_action = LPC18XX_PWM_RES_CLEAR;
+	}
+
+	lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_OUTPUTSET(pwm->hwpwm),
+			   BIT(set_event));
+	lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_OUTPUTCL(pwm->hwpwm),
+			   BIT(clear_event));
+	lpc18xx_pwm_set_conflict_res(lpc18xx_pwm, pwm, res_action);
+
+	return 0;
+}
+
+static void lpc18xx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
+	struct lpc18xx_pwm_data *lpc18xx_data = &lpc18xx_pwm->channeldata[pwm->hwpwm];
+
+	lpc18xx_pwm_writel(lpc18xx_pwm,
+			   LPC18XX_PWM_EVCTRL(lpc18xx_data->duty_event), 0);
+	lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_OUTPUTSET(pwm->hwpwm), 0);
+	lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_OUTPUTCL(pwm->hwpwm), 0);
+}
+
+static int lpc18xx_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
+	struct lpc18xx_pwm_data *lpc18xx_data = &lpc18xx_pwm->channeldata[pwm->hwpwm];
+	unsigned long event;
+
+	event = find_first_zero_bit(&lpc18xx_pwm->event_map,
+				    LPC18XX_PWM_EVENT_MAX);
+
+	if (event >= LPC18XX_PWM_EVENT_MAX) {
+		dev_err(lpc18xx_pwm->dev,
+			"maximum number of simultaneous channels reached\n");
+		return -EBUSY;
+	}
+
+	set_bit(event, &lpc18xx_pwm->event_map);
+	lpc18xx_data->duty_event = event;
+
+	return 0;
+}
+
+static void lpc18xx_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
+	struct lpc18xx_pwm_data *lpc18xx_data = &lpc18xx_pwm->channeldata[pwm->hwpwm];
+
+	clear_bit(lpc18xx_data->duty_event, &lpc18xx_pwm->event_map);
+}
+
+static int lpc18xx_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			     const struct pwm_state *state)
+{
+	int err;
+	bool enabled = pwm->state.enabled;
+
+	if (state->polarity != pwm->state.polarity && pwm->state.enabled) {
+		lpc18xx_pwm_disable(chip, pwm);
+		enabled = false;
+	}
+
+	if (!state->enabled) {
+		if (enabled)
+			lpc18xx_pwm_disable(chip, pwm);
+
+		return 0;
+	}
+
+	err = lpc18xx_pwm_config(pwm->chip, pwm, state->duty_cycle, state->period);
+	if (err)
+		return err;
+
+	if (!enabled)
+		err = lpc18xx_pwm_enable(chip, pwm, state->polarity);
+
+	return err;
+}
+static const struct pwm_ops lpc18xx_pwm_ops = {
+	.apply = lpc18xx_pwm_apply,
+	.request = lpc18xx_pwm_request,
+	.free = lpc18xx_pwm_free,
+	.owner = THIS_MODULE,
+};
+
+static const struct of_device_id lpc18xx_pwm_of_match[] = {
+	{ .compatible = "nxp,lpc1850-sct-pwm" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_pwm_of_match);
+
+static int lpc18xx_pwm_probe(struct platform_device *pdev)
+{
+	struct lpc18xx_pwm_chip *lpc18xx_pwm;
+	int ret;
+	u64 val;
+
+	lpc18xx_pwm = devm_kzalloc(&pdev->dev, sizeof(*lpc18xx_pwm),
+				   GFP_KERNEL);
+	if (!lpc18xx_pwm)
+		return -ENOMEM;
+
+	lpc18xx_pwm->dev = &pdev->dev;
+
+	lpc18xx_pwm->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(lpc18xx_pwm->base))
+		return PTR_ERR(lpc18xx_pwm->base);
+
+	lpc18xx_pwm->pwm_clk = devm_clk_get(&pdev->dev, "pwm");
+	if (IS_ERR(lpc18xx_pwm->pwm_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(lpc18xx_pwm->pwm_clk),
+				     "failed to get pwm clock\n");
+
+	ret = clk_prepare_enable(lpc18xx_pwm->pwm_clk);
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "could not prepare or enable pwm clock\n");
+
+	lpc18xx_pwm->clk_rate = clk_get_rate(lpc18xx_pwm->pwm_clk);
+	if (!lpc18xx_pwm->clk_rate) {
+		ret = dev_err_probe(&pdev->dev,
+				    -EINVAL, "pwm clock has no frequency\n");
+		goto disable_pwmclk;
+	}
+
+	/*
+	 * If clkrate is too fast, the calculations in .apply() might overflow.
+	 */
+	if (lpc18xx_pwm->clk_rate > NSEC_PER_SEC) {
+		ret = dev_err_probe(&pdev->dev, -EINVAL, "pwm clock to fast\n");
+		goto disable_pwmclk;
+	}
+
+	mutex_init(&lpc18xx_pwm->res_lock);
+	mutex_init(&lpc18xx_pwm->period_lock);
+
+	lpc18xx_pwm->max_period_ns =
+		mul_u64_u64_div_u64(NSEC_PER_SEC, LPC18XX_PWM_TIMER_MAX, lpc18xx_pwm->clk_rate);
+
+	lpc18xx_pwm->min_period_ns = DIV_ROUND_UP(NSEC_PER_SEC,
+						  lpc18xx_pwm->clk_rate);
+
+	lpc18xx_pwm->chip.dev = &pdev->dev;
+	lpc18xx_pwm->chip.ops = &lpc18xx_pwm_ops;
+	lpc18xx_pwm->chip.npwm = LPC18XX_NUM_PWMS;
+
+	/* SCT counter must be in unify (32 bit) mode */
+	lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_CONFIG,
+			   LPC18XX_PWM_CONFIG_UNIFY);
+
+	/*
+	 * Everytime the timer counter reaches the period value, the related
+	 * event will be triggered and the counter reset to 0.
+	 */
+	set_bit(LPC18XX_PWM_EVENT_PERIOD, &lpc18xx_pwm->event_map);
+	lpc18xx_pwm->period_event = LPC18XX_PWM_EVENT_PERIOD;
+
+	lpc18xx_pwm_writel(lpc18xx_pwm,
+			   LPC18XX_PWM_EVSTATEMSK(lpc18xx_pwm->period_event),
+			   LPC18XX_PWM_EVSTATEMSK_ALL);
+
+	val = LPC18XX_PWM_EVCTRL_MATCH(lpc18xx_pwm->period_event) |
+	      LPC18XX_PWM_EVCTRL_COMB_MATCH;
+	lpc18xx_pwm_writel(lpc18xx_pwm,
+			   LPC18XX_PWM_EVCTRL(lpc18xx_pwm->period_event), val);
+
+	lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_LIMIT,
+			   BIT(lpc18xx_pwm->period_event));
+
+	val = lpc18xx_pwm_readl(lpc18xx_pwm, LPC18XX_PWM_CTRL);
+	val &= ~LPC18XX_PWM_BIDIR;
+	val &= ~LPC18XX_PWM_CTRL_HALT;
+	val &= ~LPC18XX_PWM_PRE_MASK;
+	val |= LPC18XX_PWM_PRE(0);
+	lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_CTRL, val);
+
+	ret = pwmchip_add(&lpc18xx_pwm->chip);
+	if (ret < 0) {
+		dev_err_probe(&pdev->dev, ret, "pwmchip_add failed\n");
+		goto disable_pwmclk;
+	}
+
+	platform_set_drvdata(pdev, lpc18xx_pwm);
+
+	return 0;
+
+disable_pwmclk:
+	clk_disable_unprepare(lpc18xx_pwm->pwm_clk);
+	return ret;
+}
+
+static int lpc18xx_pwm_remove(struct platform_device *pdev)
+{
+	struct lpc18xx_pwm_chip *lpc18xx_pwm = platform_get_drvdata(pdev);
+	u32 val;
+
+	pwmchip_remove(&lpc18xx_pwm->chip);
+
+	val = lpc18xx_pwm_readl(lpc18xx_pwm, LPC18XX_PWM_CTRL);
+	lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_CTRL,
+			   val | LPC18XX_PWM_CTRL_HALT);
+
+	clk_disable_unprepare(lpc18xx_pwm->pwm_clk);
+
+	return 0;
+}
+
+static struct platform_driver lpc18xx_pwm_driver = {
+	.driver = {
+		.name = "lpc18xx-sct-pwm",
+		.of_match_table = lpc18xx_pwm_of_match,
+	},
+	.probe = lpc18xx_pwm_probe,
+	.remove = lpc18xx_pwm_remove,
+};
+module_platform_driver(lpc18xx_pwm_driver);
+
+MODULE_AUTHOR("Ariel D'Alessandro <ariel@vanguardiasur.com.ar>");
+MODULE_DESCRIPTION("NXP LPC18xx PWM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-lpc32xx.c b/drivers/pwm/pwm-lpc32xx.c
new file mode 100644
index 000000000..806f0bb3a
--- /dev/null
+++ b/drivers/pwm/pwm-lpc32xx.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2012 Alexandre Pereira da Silva <aletes.xgr@gmail.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+struct lpc32xx_pwm_chip {
+	struct pwm_chip chip;
+	struct clk *clk;
+	void __iomem *base;
+};
+
+#define PWM_ENABLE	BIT(31)
+#define PWM_PIN_LEVEL	BIT(30)
+
+#define to_lpc32xx_pwm_chip(_chip) \
+	container_of(_chip, struct lpc32xx_pwm_chip, chip)
+
+static int lpc32xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			      int duty_ns, int period_ns)
+{
+	struct lpc32xx_pwm_chip *lpc32xx = to_lpc32xx_pwm_chip(chip);
+	unsigned long long c;
+	int period_cycles, duty_cycles;
+	u32 val;
+	c = clk_get_rate(lpc32xx->clk);
+
+	/* The highest acceptable divisor is 256, which is represented by 0 */
+	period_cycles = div64_u64(c * period_ns,
+			       (unsigned long long)NSEC_PER_SEC * 256);
+	if (!period_cycles || period_cycles > 256)
+		return -ERANGE;
+	if (period_cycles == 256)
+		period_cycles = 0;
+
+	/* Compute 256 x #duty/period value and care for corner cases */
+	duty_cycles = div64_u64((unsigned long long)(period_ns - duty_ns) * 256,
+				period_ns);
+	if (!duty_cycles)
+		duty_cycles = 1;
+	if (duty_cycles > 255)
+		duty_cycles = 255;
+
+	val = readl(lpc32xx->base);
+	val &= ~0xFFFF;
+	val |= (period_cycles << 8) | duty_cycles;
+	writel(val, lpc32xx->base);
+
+	return 0;
+}
+
+static int lpc32xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct lpc32xx_pwm_chip *lpc32xx = to_lpc32xx_pwm_chip(chip);
+	u32 val;
+	int ret;
+
+	ret = clk_prepare_enable(lpc32xx->clk);
+	if (ret)
+		return ret;
+
+	val = readl(lpc32xx->base);
+	val |= PWM_ENABLE;
+	writel(val, lpc32xx->base);
+
+	return 0;
+}
+
+static void lpc32xx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct lpc32xx_pwm_chip *lpc32xx = to_lpc32xx_pwm_chip(chip);
+	u32 val;
+
+	val = readl(lpc32xx->base);
+	val &= ~PWM_ENABLE;
+	writel(val, lpc32xx->base);
+
+	clk_disable_unprepare(lpc32xx->clk);
+}
+
+static int lpc32xx_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			     const struct pwm_state *state)
+{
+	int err;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		if (pwm->state.enabled)
+			lpc32xx_pwm_disable(chip, pwm);
+
+		return 0;
+	}
+
+	err = lpc32xx_pwm_config(pwm->chip, pwm, state->duty_cycle, state->period);
+	if (err)
+		return err;
+
+	if (!pwm->state.enabled)
+		err = lpc32xx_pwm_enable(chip, pwm);
+
+	return err;
+}
+
+static const struct pwm_ops lpc32xx_pwm_ops = {
+	.apply = lpc32xx_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static int lpc32xx_pwm_probe(struct platform_device *pdev)
+{
+	struct lpc32xx_pwm_chip *lpc32xx;
+	int ret;
+	u32 val;
+
+	lpc32xx = devm_kzalloc(&pdev->dev, sizeof(*lpc32xx), GFP_KERNEL);
+	if (!lpc32xx)
+		return -ENOMEM;
+
+	lpc32xx->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(lpc32xx->base))
+		return PTR_ERR(lpc32xx->base);
+
+	lpc32xx->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(lpc32xx->clk))
+		return PTR_ERR(lpc32xx->clk);
+
+	lpc32xx->chip.dev = &pdev->dev;
+	lpc32xx->chip.ops = &lpc32xx_pwm_ops;
+	lpc32xx->chip.npwm = 1;
+
+	/* If PWM is disabled, configure the output to the default value */
+	val = readl(lpc32xx->base);
+	val &= ~PWM_PIN_LEVEL;
+	writel(val, lpc32xx->base);
+
+	ret = devm_pwmchip_add(&pdev->dev, &lpc32xx->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add PWM chip, error %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id lpc32xx_pwm_dt_ids[] = {
+	{ .compatible = "nxp,lpc3220-pwm", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_pwm_dt_ids);
+
+static struct platform_driver lpc32xx_pwm_driver = {
+	.driver = {
+		.name = "lpc32xx-pwm",
+		.of_match_table = lpc32xx_pwm_dt_ids,
+	},
+	.probe = lpc32xx_pwm_probe,
+};
+module_platform_driver(lpc32xx_pwm_driver);
+
+MODULE_ALIAS("platform:lpc32xx-pwm");
+MODULE_AUTHOR("Alexandre Pereira da Silva <aletes.xgr@gmail.com>");
+MODULE_DESCRIPTION("LPC32XX PWM Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-lpss-pci.c b/drivers/pwm/pwm-lpss-pci.c
new file mode 100644
index 000000000..98413d364
--- /dev/null
+++ b/drivers/pwm/pwm-lpss-pci.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel Low Power Subsystem PWM controller PCI driver
+ *
+ * Copyright (C) 2014, Intel Corporation
+ *
+ * Derived from the original pwm-lpss.c
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pm_runtime.h>
+
+#include "pwm-lpss.h"
+
+static int pwm_lpss_probe_pci(struct pci_dev *pdev,
+			      const struct pci_device_id *id)
+{
+	const struct pwm_lpss_boardinfo *info;
+	struct pwm_lpss_chip *lpwm;
+	int err;
+
+	err = pcim_enable_device(pdev);
+	if (err < 0)
+		return err;
+
+	err = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev));
+	if (err)
+		return err;
+
+	info = (struct pwm_lpss_boardinfo *)id->driver_data;
+	lpwm = pwm_lpss_probe(&pdev->dev, pcim_iomap_table(pdev)[0], info);
+	if (IS_ERR(lpwm))
+		return PTR_ERR(lpwm);
+
+	pci_set_drvdata(pdev, lpwm);
+
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_allow(&pdev->dev);
+
+	return 0;
+}
+
+static void pwm_lpss_remove_pci(struct pci_dev *pdev)
+{
+	pm_runtime_forbid(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+}
+
+static int pwm_lpss_runtime_suspend_pci(struct device *dev)
+{
+	/*
+	 * The PCI core will handle transition to D3 automatically. We only
+	 * need to provide runtime PM hooks for that to happen.
+	 */
+	return 0;
+}
+
+static int pwm_lpss_runtime_resume_pci(struct device *dev)
+{
+	return 0;
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(pwm_lpss_pci_pm,
+				 pwm_lpss_runtime_suspend_pci,
+				 pwm_lpss_runtime_resume_pci,
+				 NULL);
+
+static const struct pci_device_id pwm_lpss_pci_ids[] = {
+	{ PCI_VDEVICE(INTEL, 0x0ac8), (unsigned long)&pwm_lpss_bxt_info},
+	{ PCI_VDEVICE(INTEL, 0x0f08), (unsigned long)&pwm_lpss_byt_info},
+	{ PCI_VDEVICE(INTEL, 0x0f09), (unsigned long)&pwm_lpss_byt_info},
+	{ PCI_VDEVICE(INTEL, 0x11a5), (unsigned long)&pwm_lpss_tng_info},
+	{ PCI_VDEVICE(INTEL, 0x1ac8), (unsigned long)&pwm_lpss_bxt_info},
+	{ PCI_VDEVICE(INTEL, 0x2288), (unsigned long)&pwm_lpss_bsw_info},
+	{ PCI_VDEVICE(INTEL, 0x2289), (unsigned long)&pwm_lpss_bsw_info},
+	{ PCI_VDEVICE(INTEL, 0x31c8), (unsigned long)&pwm_lpss_bxt_info},
+	{ PCI_VDEVICE(INTEL, 0x5ac8), (unsigned long)&pwm_lpss_bxt_info},
+	{ },
+};
+MODULE_DEVICE_TABLE(pci, pwm_lpss_pci_ids);
+
+static struct pci_driver pwm_lpss_driver_pci = {
+	.name = "pwm-lpss",
+	.id_table = pwm_lpss_pci_ids,
+	.probe = pwm_lpss_probe_pci,
+	.remove = pwm_lpss_remove_pci,
+	.driver = {
+		.pm = pm_ptr(&pwm_lpss_pci_pm),
+	},
+};
+module_pci_driver(pwm_lpss_driver_pci);
+
+MODULE_DESCRIPTION("PWM PCI driver for Intel LPSS");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(PWM_LPSS);
diff --git a/drivers/pwm/pwm-lpss-platform.c b/drivers/pwm/pwm-lpss-platform.c
new file mode 100644
index 000000000..c48c6f2b2
--- /dev/null
+++ b/drivers/pwm/pwm-lpss-platform.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel Low Power Subsystem PWM controller driver
+ *
+ * Copyright (C) 2014, Intel Corporation
+ *
+ * Derived from the original pwm-lpss.c
+ */
+
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+
+#include "pwm-lpss.h"
+
+
+static int pwm_lpss_probe_platform(struct platform_device *pdev)
+{
+	const struct pwm_lpss_boardinfo *info;
+	struct pwm_lpss_chip *lpwm;
+	void __iomem *base;
+
+	info = device_get_match_data(&pdev->dev);
+	if (!info)
+		return -ENODEV;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	lpwm = pwm_lpss_probe(&pdev->dev, base, info);
+	if (IS_ERR(lpwm))
+		return PTR_ERR(lpwm);
+
+	platform_set_drvdata(pdev, lpwm);
+
+	/*
+	 * On Cherry Trail devices the GFX0._PS0 AML checks if the controller
+	 * is on and if it is not on it turns it on and restores what it
+	 * believes is the correct state to the PWM controller.
+	 * Because of this we must disallow direct-complete, which keeps the
+	 * controller (runtime)suspended on resume, to avoid 2 issues:
+	 * 1. The controller getting turned on without the linux-pm code
+	 *    knowing about this. On devices where the controller is unused
+	 *    this causes it to stay on during the next suspend causing high
+	 *    battery drain (because S0i3 is not reached)
+	 * 2. The state restoring code unexpectedly messing with the controller
+	 *
+	 * Leaving the controller runtime-suspended (skipping runtime-resume +
+	 * normal-suspend) during suspend is fine.
+	 */
+	if (info->other_devices_aml_touches_pwm_regs)
+		dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE|
+						    DPM_FLAG_SMART_SUSPEND);
+
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+}
+
+static int pwm_lpss_remove_platform(struct platform_device *pdev)
+{
+	pm_runtime_disable(&pdev->dev);
+	return 0;
+}
+
+static const struct acpi_device_id pwm_lpss_acpi_match[] = {
+	{ "80860F09", (unsigned long)&pwm_lpss_byt_info },
+	{ "80862288", (unsigned long)&pwm_lpss_bsw_info },
+	{ "80862289", (unsigned long)&pwm_lpss_bsw_info },
+	{ "80865AC8", (unsigned long)&pwm_lpss_bxt_info },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, pwm_lpss_acpi_match);
+
+static struct platform_driver pwm_lpss_driver_platform = {
+	.driver = {
+		.name = "pwm-lpss",
+		.acpi_match_table = pwm_lpss_acpi_match,
+	},
+	.probe = pwm_lpss_probe_platform,
+	.remove = pwm_lpss_remove_platform,
+};
+module_platform_driver(pwm_lpss_driver_platform);
+
+MODULE_DESCRIPTION("PWM platform driver for Intel LPSS");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(PWM_LPSS);
+MODULE_ALIAS("platform:pwm-lpss");
diff --git a/drivers/pwm/pwm-lpss.c b/drivers/pwm/pwm-lpss.c
new file mode 100644
index 000000000..81ac297b8
--- /dev/null
+++ b/drivers/pwm/pwm-lpss.c
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel Low Power Subsystem PWM controller driver
+ *
+ * Copyright (C) 2014, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ * Author: Chew Kean Ho <kean.ho.chew@intel.com>
+ * Author: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
+ * Author: Chew Chiau Ee <chiau.ee.chew@intel.com>
+ * Author: Alan Cox <alan@linux.intel.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/time.h>
+
+#define DEFAULT_SYMBOL_NAMESPACE PWM_LPSS
+
+#include "pwm-lpss.h"
+
+#define PWM				0x00000000
+#define PWM_ENABLE			BIT(31)
+#define PWM_SW_UPDATE			BIT(30)
+#define PWM_BASE_UNIT_SHIFT		8
+#define PWM_ON_TIME_DIV_MASK		GENMASK(7, 0)
+
+/* Size of each PWM register space if multiple */
+#define PWM_SIZE			0x400
+
+/* BayTrail */
+const struct pwm_lpss_boardinfo pwm_lpss_byt_info = {
+	.clk_rate = 25000000,
+	.npwm = 1,
+	.base_unit_bits = 16,
+};
+EXPORT_SYMBOL_GPL(pwm_lpss_byt_info);
+
+/* Braswell */
+const struct pwm_lpss_boardinfo pwm_lpss_bsw_info = {
+	.clk_rate = 19200000,
+	.npwm = 1,
+	.base_unit_bits = 16,
+	.other_devices_aml_touches_pwm_regs = true,
+};
+EXPORT_SYMBOL_GPL(pwm_lpss_bsw_info);
+
+/* Broxton */
+const struct pwm_lpss_boardinfo pwm_lpss_bxt_info = {
+	.clk_rate = 19200000,
+	.npwm = 4,
+	.base_unit_bits = 22,
+	.bypass = true,
+};
+EXPORT_SYMBOL_GPL(pwm_lpss_bxt_info);
+
+/* Tangier */
+const struct pwm_lpss_boardinfo pwm_lpss_tng_info = {
+	.clk_rate = 19200000,
+	.npwm = 4,
+	.base_unit_bits = 22,
+};
+EXPORT_SYMBOL_GPL(pwm_lpss_tng_info);
+
+static inline struct pwm_lpss_chip *to_lpwm(struct pwm_chip *chip)
+{
+	return container_of(chip, struct pwm_lpss_chip, chip);
+}
+
+static inline u32 pwm_lpss_read(const struct pwm_device *pwm)
+{
+	struct pwm_lpss_chip *lpwm = to_lpwm(pwm->chip);
+
+	return readl(lpwm->regs + pwm->hwpwm * PWM_SIZE + PWM);
+}
+
+static inline void pwm_lpss_write(const struct pwm_device *pwm, u32 value)
+{
+	struct pwm_lpss_chip *lpwm = to_lpwm(pwm->chip);
+
+	writel(value, lpwm->regs + pwm->hwpwm * PWM_SIZE + PWM);
+}
+
+static int pwm_lpss_wait_for_update(struct pwm_device *pwm)
+{
+	struct pwm_lpss_chip *lpwm = to_lpwm(pwm->chip);
+	const void __iomem *addr = lpwm->regs + pwm->hwpwm * PWM_SIZE + PWM;
+	const unsigned int ms = 500 * USEC_PER_MSEC;
+	u32 val;
+	int err;
+
+	/*
+	 * PWM Configuration register has SW_UPDATE bit that is set when a new
+	 * configuration is written to the register. The bit is automatically
+	 * cleared at the start of the next output cycle by the IP block.
+	 *
+	 * If one writes a new configuration to the register while it still has
+	 * the bit enabled, PWM may freeze. That is, while one can still write
+	 * to the register, it won't have an effect. Thus, we try to sleep long
+	 * enough that the bit gets cleared and make sure the bit is not
+	 * enabled while we update the configuration.
+	 */
+	err = readl_poll_timeout(addr, val, !(val & PWM_SW_UPDATE), 40, ms);
+	if (err)
+		dev_err(pwm->chip->dev, "PWM_SW_UPDATE was not cleared\n");
+
+	return err;
+}
+
+static inline int pwm_lpss_is_updating(struct pwm_device *pwm)
+{
+	if (pwm_lpss_read(pwm) & PWM_SW_UPDATE) {
+		dev_err(pwm->chip->dev, "PWM_SW_UPDATE is still set, skipping update\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static void pwm_lpss_prepare(struct pwm_lpss_chip *lpwm, struct pwm_device *pwm,
+			     int duty_ns, int period_ns)
+{
+	unsigned long long on_time_div;
+	unsigned long c = lpwm->info->clk_rate, base_unit_range;
+	unsigned long long base_unit, freq = NSEC_PER_SEC;
+	u32 ctrl;
+
+	do_div(freq, period_ns);
+
+	/*
+	 * The equation is:
+	 * base_unit = round(base_unit_range * freq / c)
+	 */
+	base_unit_range = BIT(lpwm->info->base_unit_bits);
+	freq *= base_unit_range;
+
+	base_unit = DIV_ROUND_CLOSEST_ULL(freq, c);
+	/* base_unit must not be 0 and we also want to avoid overflowing it */
+	base_unit = clamp_val(base_unit, 1, base_unit_range - 1);
+
+	on_time_div = 255ULL * duty_ns;
+	do_div(on_time_div, period_ns);
+	on_time_div = 255ULL - on_time_div;
+
+	ctrl = pwm_lpss_read(pwm);
+	ctrl &= ~PWM_ON_TIME_DIV_MASK;
+	ctrl &= ~((base_unit_range - 1) << PWM_BASE_UNIT_SHIFT);
+	ctrl |= (u32) base_unit << PWM_BASE_UNIT_SHIFT;
+	ctrl |= on_time_div;
+
+	pwm_lpss_write(pwm, ctrl);
+	pwm_lpss_write(pwm, ctrl | PWM_SW_UPDATE);
+}
+
+static inline void pwm_lpss_cond_enable(struct pwm_device *pwm, bool cond)
+{
+	if (cond)
+		pwm_lpss_write(pwm, pwm_lpss_read(pwm) | PWM_ENABLE);
+}
+
+static int pwm_lpss_prepare_enable(struct pwm_lpss_chip *lpwm,
+				   struct pwm_device *pwm,
+				   const struct pwm_state *state)
+{
+	int ret;
+
+	ret = pwm_lpss_is_updating(pwm);
+	if (ret)
+		return ret;
+
+	pwm_lpss_prepare(lpwm, pwm, state->duty_cycle, state->period);
+	pwm_lpss_cond_enable(pwm, lpwm->info->bypass == false);
+	ret = pwm_lpss_wait_for_update(pwm);
+	if (ret)
+		return ret;
+
+	pwm_lpss_cond_enable(pwm, lpwm->info->bypass == true);
+	return 0;
+}
+
+static int pwm_lpss_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			  const struct pwm_state *state)
+{
+	struct pwm_lpss_chip *lpwm = to_lpwm(chip);
+	int ret = 0;
+
+	if (state->enabled) {
+		if (!pwm_is_enabled(pwm)) {
+			pm_runtime_get_sync(chip->dev);
+			ret = pwm_lpss_prepare_enable(lpwm, pwm, state);
+			if (ret)
+				pm_runtime_put(chip->dev);
+		} else {
+			ret = pwm_lpss_prepare_enable(lpwm, pwm, state);
+		}
+	} else if (pwm_is_enabled(pwm)) {
+		pwm_lpss_write(pwm, pwm_lpss_read(pwm) & ~PWM_ENABLE);
+		pm_runtime_put(chip->dev);
+	}
+
+	return ret;
+}
+
+static int pwm_lpss_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+			      struct pwm_state *state)
+{
+	struct pwm_lpss_chip *lpwm = to_lpwm(chip);
+	unsigned long base_unit_range;
+	unsigned long long base_unit, freq, on_time_div;
+	u32 ctrl;
+
+	pm_runtime_get_sync(chip->dev);
+
+	base_unit_range = BIT(lpwm->info->base_unit_bits);
+
+	ctrl = pwm_lpss_read(pwm);
+	on_time_div = 255 - (ctrl & PWM_ON_TIME_DIV_MASK);
+	base_unit = (ctrl >> PWM_BASE_UNIT_SHIFT) & (base_unit_range - 1);
+
+	freq = base_unit * lpwm->info->clk_rate;
+	do_div(freq, base_unit_range);
+	if (freq == 0)
+		state->period = NSEC_PER_SEC;
+	else
+		state->period = NSEC_PER_SEC / (unsigned long)freq;
+
+	on_time_div *= state->period;
+	do_div(on_time_div, 255);
+	state->duty_cycle = on_time_div;
+
+	state->polarity = PWM_POLARITY_NORMAL;
+	state->enabled = !!(ctrl & PWM_ENABLE);
+
+	pm_runtime_put(chip->dev);
+
+	return 0;
+}
+
+static const struct pwm_ops pwm_lpss_ops = {
+	.apply = pwm_lpss_apply,
+	.get_state = pwm_lpss_get_state,
+	.owner = THIS_MODULE,
+};
+
+struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, void __iomem *base,
+				     const struct pwm_lpss_boardinfo *info)
+{
+	struct pwm_lpss_chip *lpwm;
+	unsigned long c;
+	int i, ret;
+	u32 ctrl;
+
+	if (WARN_ON(info->npwm > MAX_PWMS))
+		return ERR_PTR(-ENODEV);
+
+	lpwm = devm_kzalloc(dev, sizeof(*lpwm), GFP_KERNEL);
+	if (!lpwm)
+		return ERR_PTR(-ENOMEM);
+
+	lpwm->regs = base;
+	lpwm->info = info;
+
+	c = lpwm->info->clk_rate;
+	if (!c)
+		return ERR_PTR(-EINVAL);
+
+	lpwm->chip.dev = dev;
+	lpwm->chip.ops = &pwm_lpss_ops;
+	lpwm->chip.npwm = info->npwm;
+
+	ret = devm_pwmchip_add(dev, &lpwm->chip);
+	if (ret) {
+		dev_err(dev, "failed to add PWM chip: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	for (i = 0; i < lpwm->info->npwm; i++) {
+		ctrl = pwm_lpss_read(&lpwm->chip.pwms[i]);
+		if (ctrl & PWM_ENABLE)
+			pm_runtime_get(dev);
+	}
+
+	return lpwm;
+}
+EXPORT_SYMBOL_GPL(pwm_lpss_probe);
+
+MODULE_DESCRIPTION("PWM driver for Intel LPSS");
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-lpss.h b/drivers/pwm/pwm-lpss.h
new file mode 100644
index 000000000..8e82eb5a7
--- /dev/null
+++ b/drivers/pwm/pwm-lpss.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Intel Low Power Subsystem PWM controller driver
+ *
+ * Copyright (C) 2014, Intel Corporation
+ *
+ * Derived from the original pwm-lpss.c
+ */
+
+#ifndef __PWM_LPSS_H
+#define __PWM_LPSS_H
+
+#include <linux/device.h>
+#include <linux/pwm.h>
+
+#define MAX_PWMS			4
+
+struct pwm_lpss_chip {
+	struct pwm_chip chip;
+	void __iomem *regs;
+	const struct pwm_lpss_boardinfo *info;
+};
+
+struct pwm_lpss_boardinfo {
+	unsigned long clk_rate;
+	unsigned int npwm;
+	unsigned long base_unit_bits;
+	/*
+	 * Some versions of the IP may stuck in the state machine if enable
+	 * bit is not set, and hence update bit will show busy status till
+	 * the reset. For the rest it may be otherwise.
+	 */
+	bool bypass;
+	/*
+	 * On some devices the _PS0/_PS3 AML code of the GPU (GFX0) device
+	 * messes with the PWM0 controllers state,
+	 */
+	bool other_devices_aml_touches_pwm_regs;
+};
+
+extern const struct pwm_lpss_boardinfo pwm_lpss_byt_info;
+extern const struct pwm_lpss_boardinfo pwm_lpss_bsw_info;
+extern const struct pwm_lpss_boardinfo pwm_lpss_bxt_info;
+extern const struct pwm_lpss_boardinfo pwm_lpss_tng_info;
+
+struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, void __iomem *base,
+				     const struct pwm_lpss_boardinfo *info);
+
+#endif	/* __PWM_LPSS_H */
diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
new file mode 100644
index 000000000..a337b47dc
--- /dev/null
+++ b/drivers/pwm/pwm-mediatek.c
@@ -0,0 +1,362 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MediaTek Pulse Width Modulator driver
+ *
+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2017 Zhi Mao <zhi.mao@mediatek.com>
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+/* PWM registers and bits definitions */
+#define PWMCON			0x00
+#define PWMHDUR			0x04
+#define PWMLDUR			0x08
+#define PWMGDUR			0x0c
+#define PWMWAVENUM		0x28
+#define PWMDWIDTH		0x2c
+#define PWM45DWIDTH_FIXUP	0x30
+#define PWMTHRES		0x30
+#define PWM45THRES_FIXUP	0x34
+#define PWM_CK_26M_SEL		0x210
+
+#define PWM_CLK_DIV_MAX		7
+
+struct pwm_mediatek_of_data {
+	unsigned int num_pwms;
+	bool pwm45_fixup;
+	bool has_ck_26m_sel;
+};
+
+/**
+ * struct pwm_mediatek_chip - struct representing PWM chip
+ * @chip: linux PWM chip representation
+ * @regs: base address of PWM chip
+ * @clk_top: the top clock generator
+ * @clk_main: the clock used by PWM core
+ * @clk_pwms: the clock used by each PWM channel
+ * @clk_freq: the fix clock frequency of legacy MIPS SoC
+ * @soc: pointer to chip's platform data
+ */
+struct pwm_mediatek_chip {
+	struct pwm_chip chip;
+	void __iomem *regs;
+	struct clk *clk_top;
+	struct clk *clk_main;
+	struct clk **clk_pwms;
+	const struct pwm_mediatek_of_data *soc;
+};
+
+static const unsigned int pwm_mediatek_reg_offset[] = {
+	0x0010, 0x0050, 0x0090, 0x00d0, 0x0110, 0x0150, 0x0190, 0x0220
+};
+
+static inline struct pwm_mediatek_chip *
+to_pwm_mediatek_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct pwm_mediatek_chip, chip);
+}
+
+static int pwm_mediatek_clk_enable(struct pwm_chip *chip,
+				   struct pwm_device *pwm)
+{
+	struct pwm_mediatek_chip *pc = to_pwm_mediatek_chip(chip);
+	int ret;
+
+	ret = clk_prepare_enable(pc->clk_top);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_prepare_enable(pc->clk_main);
+	if (ret < 0)
+		goto disable_clk_top;
+
+	ret = clk_prepare_enable(pc->clk_pwms[pwm->hwpwm]);
+	if (ret < 0)
+		goto disable_clk_main;
+
+	return 0;
+
+disable_clk_main:
+	clk_disable_unprepare(pc->clk_main);
+disable_clk_top:
+	clk_disable_unprepare(pc->clk_top);
+
+	return ret;
+}
+
+static void pwm_mediatek_clk_disable(struct pwm_chip *chip,
+				     struct pwm_device *pwm)
+{
+	struct pwm_mediatek_chip *pc = to_pwm_mediatek_chip(chip);
+
+	clk_disable_unprepare(pc->clk_pwms[pwm->hwpwm]);
+	clk_disable_unprepare(pc->clk_main);
+	clk_disable_unprepare(pc->clk_top);
+}
+
+static inline void pwm_mediatek_writel(struct pwm_mediatek_chip *chip,
+				       unsigned int num, unsigned int offset,
+				       u32 value)
+{
+	writel(value, chip->regs + pwm_mediatek_reg_offset[num] + offset);
+}
+
+static int pwm_mediatek_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			       int duty_ns, int period_ns)
+{
+	struct pwm_mediatek_chip *pc = to_pwm_mediatek_chip(chip);
+	u32 clkdiv = 0, cnt_period, cnt_duty, reg_width = PWMDWIDTH,
+	    reg_thres = PWMTHRES;
+	u64 resolution;
+	int ret;
+
+	ret = pwm_mediatek_clk_enable(chip, pwm);
+
+	if (ret < 0)
+		return ret;
+
+	/* Make sure we use the bus clock and not the 26MHz clock */
+	if (pc->soc->has_ck_26m_sel)
+		writel(0, pc->regs + PWM_CK_26M_SEL);
+
+	/* Using resolution in picosecond gets accuracy higher */
+	resolution = (u64)NSEC_PER_SEC * 1000;
+	do_div(resolution, clk_get_rate(pc->clk_pwms[pwm->hwpwm]));
+
+	cnt_period = DIV_ROUND_CLOSEST_ULL((u64)period_ns * 1000, resolution);
+	while (cnt_period > 8191) {
+		resolution *= 2;
+		clkdiv++;
+		cnt_period = DIV_ROUND_CLOSEST_ULL((u64)period_ns * 1000,
+						   resolution);
+	}
+
+	if (clkdiv > PWM_CLK_DIV_MAX) {
+		pwm_mediatek_clk_disable(chip, pwm);
+		dev_err(chip->dev, "period of %d ns not supported\n", period_ns);
+		return -EINVAL;
+	}
+
+	if (pc->soc->pwm45_fixup && pwm->hwpwm > 2) {
+		/*
+		 * PWM[4,5] has distinct offset for PWMDWIDTH and PWMTHRES
+		 * from the other PWMs on MT7623.
+		 */
+		reg_width = PWM45DWIDTH_FIXUP;
+		reg_thres = PWM45THRES_FIXUP;
+	}
+
+	cnt_duty = DIV_ROUND_CLOSEST_ULL((u64)duty_ns * 1000, resolution);
+	pwm_mediatek_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | clkdiv);
+	pwm_mediatek_writel(pc, pwm->hwpwm, reg_width, cnt_period);
+	pwm_mediatek_writel(pc, pwm->hwpwm, reg_thres, cnt_duty);
+
+	pwm_mediatek_clk_disable(chip, pwm);
+
+	return 0;
+}
+
+static int pwm_mediatek_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct pwm_mediatek_chip *pc = to_pwm_mediatek_chip(chip);
+	u32 value;
+	int ret;
+
+	ret = pwm_mediatek_clk_enable(chip, pwm);
+	if (ret < 0)
+		return ret;
+
+	value = readl(pc->regs);
+	value |= BIT(pwm->hwpwm);
+	writel(value, pc->regs);
+
+	return 0;
+}
+
+static void pwm_mediatek_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct pwm_mediatek_chip *pc = to_pwm_mediatek_chip(chip);
+	u32 value;
+
+	value = readl(pc->regs);
+	value &= ~BIT(pwm->hwpwm);
+	writel(value, pc->regs);
+
+	pwm_mediatek_clk_disable(chip, pwm);
+}
+
+static int pwm_mediatek_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			      const struct pwm_state *state)
+{
+	int err;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		if (pwm->state.enabled)
+			pwm_mediatek_disable(chip, pwm);
+
+		return 0;
+	}
+
+	err = pwm_mediatek_config(pwm->chip, pwm, state->duty_cycle, state->period);
+	if (err)
+		return err;
+
+	if (!pwm->state.enabled)
+		err = pwm_mediatek_enable(chip, pwm);
+
+	return err;
+}
+
+static const struct pwm_ops pwm_mediatek_ops = {
+	.apply = pwm_mediatek_apply,
+	.owner = THIS_MODULE,
+};
+
+static int pwm_mediatek_probe(struct platform_device *pdev)
+{
+	struct pwm_mediatek_chip *pc;
+	unsigned int i;
+	int ret;
+
+	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
+	if (!pc)
+		return -ENOMEM;
+
+	pc->soc = of_device_get_match_data(&pdev->dev);
+
+	pc->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(pc->regs))
+		return PTR_ERR(pc->regs);
+
+	pc->clk_pwms = devm_kmalloc_array(&pdev->dev, pc->soc->num_pwms,
+				    sizeof(*pc->clk_pwms), GFP_KERNEL);
+	if (!pc->clk_pwms)
+		return -ENOMEM;
+
+	pc->clk_top = devm_clk_get(&pdev->dev, "top");
+	if (IS_ERR(pc->clk_top))
+		return dev_err_probe(&pdev->dev, PTR_ERR(pc->clk_top),
+				     "Failed to get top clock\n");
+
+	pc->clk_main = devm_clk_get(&pdev->dev, "main");
+	if (IS_ERR(pc->clk_main))
+		return dev_err_probe(&pdev->dev, PTR_ERR(pc->clk_main),
+				     "Failed to get main clock\n");
+
+	for (i = 0; i < pc->soc->num_pwms; i++) {
+		char name[8];
+
+		snprintf(name, sizeof(name), "pwm%d", i + 1);
+
+		pc->clk_pwms[i] = devm_clk_get(&pdev->dev, name);
+		if (IS_ERR(pc->clk_pwms[i]))
+			return dev_err_probe(&pdev->dev, PTR_ERR(pc->clk_pwms[i]),
+					     "Failed to get %s clock\n", name);
+	}
+
+	pc->chip.dev = &pdev->dev;
+	pc->chip.ops = &pwm_mediatek_ops;
+	pc->chip.npwm = pc->soc->num_pwms;
+
+	ret = devm_pwmchip_add(&pdev->dev, &pc->chip);
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret, "pwmchip_add() failed\n");
+
+	return 0;
+}
+
+static const struct pwm_mediatek_of_data mt2712_pwm_data = {
+	.num_pwms = 8,
+	.pwm45_fixup = false,
+	.has_ck_26m_sel = false,
+};
+
+static const struct pwm_mediatek_of_data mt6795_pwm_data = {
+	.num_pwms = 7,
+	.pwm45_fixup = false,
+	.has_ck_26m_sel = false,
+};
+
+static const struct pwm_mediatek_of_data mt7622_pwm_data = {
+	.num_pwms = 6,
+	.pwm45_fixup = false,
+	.has_ck_26m_sel = true,
+};
+
+static const struct pwm_mediatek_of_data mt7623_pwm_data = {
+	.num_pwms = 5,
+	.pwm45_fixup = true,
+	.has_ck_26m_sel = false,
+};
+
+static const struct pwm_mediatek_of_data mt7628_pwm_data = {
+	.num_pwms = 4,
+	.pwm45_fixup = true,
+	.has_ck_26m_sel = false,
+};
+
+static const struct pwm_mediatek_of_data mt7629_pwm_data = {
+	.num_pwms = 1,
+	.pwm45_fixup = false,
+	.has_ck_26m_sel = false,
+};
+
+static const struct pwm_mediatek_of_data mt8183_pwm_data = {
+	.num_pwms = 4,
+	.pwm45_fixup = false,
+	.has_ck_26m_sel = true,
+};
+
+static const struct pwm_mediatek_of_data mt8365_pwm_data = {
+	.num_pwms = 3,
+	.pwm45_fixup = false,
+	.has_ck_26m_sel = true,
+};
+
+static const struct pwm_mediatek_of_data mt8516_pwm_data = {
+	.num_pwms = 5,
+	.pwm45_fixup = false,
+	.has_ck_26m_sel = true,
+};
+
+static const struct of_device_id pwm_mediatek_of_match[] = {
+	{ .compatible = "mediatek,mt2712-pwm", .data = &mt2712_pwm_data },
+	{ .compatible = "mediatek,mt6795-pwm", .data = &mt6795_pwm_data },
+	{ .compatible = "mediatek,mt7622-pwm", .data = &mt7622_pwm_data },
+	{ .compatible = "mediatek,mt7623-pwm", .data = &mt7623_pwm_data },
+	{ .compatible = "mediatek,mt7628-pwm", .data = &mt7628_pwm_data },
+	{ .compatible = "mediatek,mt7629-pwm", .data = &mt7629_pwm_data },
+	{ .compatible = "mediatek,mt8183-pwm", .data = &mt8183_pwm_data },
+	{ .compatible = "mediatek,mt8365-pwm", .data = &mt8365_pwm_data },
+	{ .compatible = "mediatek,mt8516-pwm", .data = &mt8516_pwm_data },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, pwm_mediatek_of_match);
+
+static struct platform_driver pwm_mediatek_driver = {
+	.driver = {
+		.name = "pwm-mediatek",
+		.of_match_table = pwm_mediatek_of_match,
+	},
+	.probe = pwm_mediatek_probe,
+};
+module_platform_driver(pwm_mediatek_driver);
+
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
new file mode 100644
index 000000000..33107204a
--- /dev/null
+++ b/drivers/pwm/pwm-meson.c
@@ -0,0 +1,572 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * PWM controller driver for Amlogic Meson SoCs.
+ *
+ * This PWM is only a set of Gates, Dividers and Counters:
+ * PWM output is achieved by calculating a clock that permits calculating
+ * two periods (low and high). The counter then has to be set to switch after
+ * N cycles for the first half period.
+ * The hardware has no "polarity" setting. This driver reverses the period
+ * cycles (the low length is inverted with the high length) for
+ * PWM_POLARITY_INVERSED. This means that .get_state cannot read the polarity
+ * from the hardware.
+ * Setting the duty cycle will disable and re-enable the PWM output.
+ * Disabling the PWM stops the output immediately (without waiting for the
+ * current period to complete first).
+ *
+ * The public S912 (GXM) datasheet contains some documentation for this PWM
+ * controller starting on page 543:
+ * https://dl.khadas.com/Hardware/VIM2/Datasheet/S912_Datasheet_V0.220170314publicversion-Wesion.pdf
+ * An updated version of this IP block is found in S922X (G12B) SoCs. The
+ * datasheet contains the description for this IP block revision starting at
+ * page 1084:
+ * https://dn.odroid.com/S922X/ODROID-N2/Datasheet/S922X_Public_Datasheet_V0.2.pdf
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (C) 2014 Amlogic, Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define REG_PWM_A		0x0
+#define REG_PWM_B		0x4
+#define PWM_LOW_MASK		GENMASK(15, 0)
+#define PWM_HIGH_MASK		GENMASK(31, 16)
+
+#define REG_MISC_AB		0x8
+#define MISC_B_CLK_EN		BIT(23)
+#define MISC_A_CLK_EN		BIT(15)
+#define MISC_CLK_DIV_MASK	0x7f
+#define MISC_B_CLK_DIV_SHIFT	16
+#define MISC_A_CLK_DIV_SHIFT	8
+#define MISC_B_CLK_SEL_SHIFT	6
+#define MISC_A_CLK_SEL_SHIFT	4
+#define MISC_CLK_SEL_MASK	0x3
+#define MISC_B_EN		BIT(1)
+#define MISC_A_EN		BIT(0)
+
+#define MESON_NUM_PWMS		2
+
+static struct meson_pwm_channel_data {
+	u8		reg_offset;
+	u8		clk_sel_shift;
+	u8		clk_div_shift;
+	u32		clk_en_mask;
+	u32		pwm_en_mask;
+} meson_pwm_per_channel_data[MESON_NUM_PWMS] = {
+	{
+		.reg_offset	= REG_PWM_A,
+		.clk_sel_shift	= MISC_A_CLK_SEL_SHIFT,
+		.clk_div_shift	= MISC_A_CLK_DIV_SHIFT,
+		.clk_en_mask	= MISC_A_CLK_EN,
+		.pwm_en_mask	= MISC_A_EN,
+	},
+	{
+		.reg_offset	= REG_PWM_B,
+		.clk_sel_shift	= MISC_B_CLK_SEL_SHIFT,
+		.clk_div_shift	= MISC_B_CLK_DIV_SHIFT,
+		.clk_en_mask	= MISC_B_CLK_EN,
+		.pwm_en_mask	= MISC_B_EN,
+	}
+};
+
+struct meson_pwm_channel {
+	unsigned int hi;
+	unsigned int lo;
+	u8 pre_div;
+
+	struct clk *clk_parent;
+	struct clk_mux mux;
+	struct clk *clk;
+};
+
+struct meson_pwm_data {
+	const char * const *parent_names;
+	unsigned int num_parents;
+};
+
+struct meson_pwm {
+	struct pwm_chip chip;
+	const struct meson_pwm_data *data;
+	struct meson_pwm_channel channels[MESON_NUM_PWMS];
+	void __iomem *base;
+	/*
+	 * Protects register (write) access to the REG_MISC_AB register
+	 * that is shared between the two PWMs.
+	 */
+	spinlock_t lock;
+};
+
+static inline struct meson_pwm *to_meson_pwm(struct pwm_chip *chip)
+{
+	return container_of(chip, struct meson_pwm, chip);
+}
+
+static int meson_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct meson_pwm *meson = to_meson_pwm(chip);
+	struct meson_pwm_channel *channel = &meson->channels[pwm->hwpwm];
+	struct device *dev = chip->dev;
+	int err;
+
+	if (channel->clk_parent) {
+		err = clk_set_parent(channel->clk, channel->clk_parent);
+		if (err < 0) {
+			dev_err(dev, "failed to set parent %s for %s: %d\n",
+				__clk_get_name(channel->clk_parent),
+				__clk_get_name(channel->clk), err);
+			return err;
+		}
+	}
+
+	err = clk_prepare_enable(channel->clk);
+	if (err < 0) {
+		dev_err(dev, "failed to enable clock %s: %d\n",
+			__clk_get_name(channel->clk), err);
+		return err;
+	}
+
+	return 0;
+}
+
+static void meson_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct meson_pwm *meson = to_meson_pwm(chip);
+	struct meson_pwm_channel *channel = &meson->channels[pwm->hwpwm];
+
+	clk_disable_unprepare(channel->clk);
+}
+
+static int meson_pwm_calc(struct meson_pwm *meson, struct pwm_device *pwm,
+			  const struct pwm_state *state)
+{
+	struct meson_pwm_channel *channel = &meson->channels[pwm->hwpwm];
+	unsigned int pre_div, cnt, duty_cnt;
+	unsigned long fin_freq;
+	u64 duty, period;
+
+	duty = state->duty_cycle;
+	period = state->period;
+
+	/*
+	 * Note this is wrong. The result is an output wave that isn't really
+	 * inverted and so is wrongly identified by .get_state as normal.
+	 * Fixing this needs some care however as some machines might rely on
+	 * this.
+	 */
+	if (state->polarity == PWM_POLARITY_INVERSED)
+		duty = period - duty;
+
+	fin_freq = clk_get_rate(channel->clk);
+	if (fin_freq == 0) {
+		dev_err(meson->chip.dev, "invalid source clock frequency\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(meson->chip.dev, "fin_freq: %lu Hz\n", fin_freq);
+
+	pre_div = div64_u64(fin_freq * period, NSEC_PER_SEC * 0xffffLL);
+	if (pre_div > MISC_CLK_DIV_MASK) {
+		dev_err(meson->chip.dev, "unable to get period pre_div\n");
+		return -EINVAL;
+	}
+
+	cnt = div64_u64(fin_freq * period, NSEC_PER_SEC * (pre_div + 1));
+	if (cnt > 0xffff) {
+		dev_err(meson->chip.dev, "unable to get period cnt\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(meson->chip.dev, "period=%llu pre_div=%u cnt=%u\n", period,
+		pre_div, cnt);
+
+	if (duty == period) {
+		channel->pre_div = pre_div;
+		channel->hi = cnt;
+		channel->lo = 0;
+	} else if (duty == 0) {
+		channel->pre_div = pre_div;
+		channel->hi = 0;
+		channel->lo = cnt;
+	} else {
+		/* Then check is we can have the duty with the same pre_div */
+		duty_cnt = div64_u64(fin_freq * duty, NSEC_PER_SEC * (pre_div + 1));
+		if (duty_cnt > 0xffff) {
+			dev_err(meson->chip.dev, "unable to get duty cycle\n");
+			return -EINVAL;
+		}
+
+		dev_dbg(meson->chip.dev, "duty=%llu pre_div=%u duty_cnt=%u\n",
+			duty, pre_div, duty_cnt);
+
+		channel->pre_div = pre_div;
+		channel->hi = duty_cnt;
+		channel->lo = cnt - duty_cnt;
+	}
+
+	return 0;
+}
+
+static void meson_pwm_enable(struct meson_pwm *meson, struct pwm_device *pwm)
+{
+	struct meson_pwm_channel *channel = &meson->channels[pwm->hwpwm];
+	struct meson_pwm_channel_data *channel_data;
+	unsigned long flags;
+	u32 value;
+
+	channel_data = &meson_pwm_per_channel_data[pwm->hwpwm];
+
+	spin_lock_irqsave(&meson->lock, flags);
+
+	value = readl(meson->base + REG_MISC_AB);
+	value &= ~(MISC_CLK_DIV_MASK << channel_data->clk_div_shift);
+	value |= channel->pre_div << channel_data->clk_div_shift;
+	value |= channel_data->clk_en_mask;
+	writel(value, meson->base + REG_MISC_AB);
+
+	value = FIELD_PREP(PWM_HIGH_MASK, channel->hi) |
+		FIELD_PREP(PWM_LOW_MASK, channel->lo);
+	writel(value, meson->base + channel_data->reg_offset);
+
+	value = readl(meson->base + REG_MISC_AB);
+	value |= channel_data->pwm_en_mask;
+	writel(value, meson->base + REG_MISC_AB);
+
+	spin_unlock_irqrestore(&meson->lock, flags);
+}
+
+static void meson_pwm_disable(struct meson_pwm *meson, struct pwm_device *pwm)
+{
+	unsigned long flags;
+	u32 value;
+
+	spin_lock_irqsave(&meson->lock, flags);
+
+	value = readl(meson->base + REG_MISC_AB);
+	value &= ~meson_pwm_per_channel_data[pwm->hwpwm].pwm_en_mask;
+	writel(value, meson->base + REG_MISC_AB);
+
+	spin_unlock_irqrestore(&meson->lock, flags);
+}
+
+static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			   const struct pwm_state *state)
+{
+	struct meson_pwm *meson = to_meson_pwm(chip);
+	struct meson_pwm_channel *channel = &meson->channels[pwm->hwpwm];
+	int err = 0;
+
+	if (!state->enabled) {
+		if (state->polarity == PWM_POLARITY_INVERSED) {
+			/*
+			 * This IP block revision doesn't have an "always high"
+			 * setting which we can use for "inverted disabled".
+			 * Instead we achieve this using the same settings
+			 * that we use a pre_div of 0 (to get the shortest
+			 * possible duration for one "count") and
+			 * "period == duty_cycle". This results in a signal
+			 * which is LOW for one "count", while being HIGH for
+			 * the rest of the (so the signal is HIGH for slightly
+			 * less than 100% of the period, but this is the best
+			 * we can achieve).
+			 */
+			channel->pre_div = 0;
+			channel->hi = ~0;
+			channel->lo = 0;
+
+			meson_pwm_enable(meson, pwm);
+		} else {
+			meson_pwm_disable(meson, pwm);
+		}
+	} else {
+		err = meson_pwm_calc(meson, pwm, state);
+		if (err < 0)
+			return err;
+
+		meson_pwm_enable(meson, pwm);
+	}
+
+	return 0;
+}
+
+static unsigned int meson_pwm_cnt_to_ns(struct pwm_chip *chip,
+					struct pwm_device *pwm, u32 cnt)
+{
+	struct meson_pwm *meson = to_meson_pwm(chip);
+	struct meson_pwm_channel *channel;
+	unsigned long fin_freq;
+	u32 fin_ns;
+
+	/* to_meson_pwm() can only be used after .get_state() is called */
+	channel = &meson->channels[pwm->hwpwm];
+
+	fin_freq = clk_get_rate(channel->clk);
+	if (fin_freq == 0)
+		return 0;
+
+	fin_ns = div_u64(NSEC_PER_SEC, fin_freq);
+
+	return cnt * fin_ns * (channel->pre_div + 1);
+}
+
+static int meson_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+			       struct pwm_state *state)
+{
+	struct meson_pwm *meson = to_meson_pwm(chip);
+	struct meson_pwm_channel_data *channel_data;
+	struct meson_pwm_channel *channel;
+	u32 value, tmp;
+
+	if (!state)
+		return 0;
+
+	channel = &meson->channels[pwm->hwpwm];
+	channel_data = &meson_pwm_per_channel_data[pwm->hwpwm];
+
+	value = readl(meson->base + REG_MISC_AB);
+
+	tmp = channel_data->pwm_en_mask | channel_data->clk_en_mask;
+	state->enabled = (value & tmp) == tmp;
+
+	tmp = value >> channel_data->clk_div_shift;
+	channel->pre_div = FIELD_GET(MISC_CLK_DIV_MASK, tmp);
+
+	value = readl(meson->base + channel_data->reg_offset);
+
+	channel->lo = FIELD_GET(PWM_LOW_MASK, value);
+	channel->hi = FIELD_GET(PWM_HIGH_MASK, value);
+
+	state->period = meson_pwm_cnt_to_ns(chip, pwm, channel->lo + channel->hi);
+	state->duty_cycle = meson_pwm_cnt_to_ns(chip, pwm, channel->hi);
+
+	state->polarity = PWM_POLARITY_NORMAL;
+
+	return 0;
+}
+
+static const struct pwm_ops meson_pwm_ops = {
+	.request = meson_pwm_request,
+	.free = meson_pwm_free,
+	.apply = meson_pwm_apply,
+	.get_state = meson_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static const char * const pwm_meson8b_parent_names[] = {
+	"xtal", "vid_pll", "fclk_div4", "fclk_div3"
+};
+
+static const struct meson_pwm_data pwm_meson8b_data = {
+	.parent_names = pwm_meson8b_parent_names,
+	.num_parents = ARRAY_SIZE(pwm_meson8b_parent_names),
+};
+
+static const char * const pwm_gxbb_parent_names[] = {
+	"xtal", "hdmi_pll", "fclk_div4", "fclk_div3"
+};
+
+static const struct meson_pwm_data pwm_gxbb_data = {
+	.parent_names = pwm_gxbb_parent_names,
+	.num_parents = ARRAY_SIZE(pwm_gxbb_parent_names),
+};
+
+/*
+ * Only the 2 first inputs of the GXBB AO PWMs are valid
+ * The last 2 are grounded
+ */
+static const char * const pwm_gxbb_ao_parent_names[] = {
+	"xtal", "clk81"
+};
+
+static const struct meson_pwm_data pwm_gxbb_ao_data = {
+	.parent_names = pwm_gxbb_ao_parent_names,
+	.num_parents = ARRAY_SIZE(pwm_gxbb_ao_parent_names),
+};
+
+static const char * const pwm_axg_ee_parent_names[] = {
+	"xtal", "fclk_div5", "fclk_div4", "fclk_div3"
+};
+
+static const struct meson_pwm_data pwm_axg_ee_data = {
+	.parent_names = pwm_axg_ee_parent_names,
+	.num_parents = ARRAY_SIZE(pwm_axg_ee_parent_names),
+};
+
+static const char * const pwm_axg_ao_parent_names[] = {
+	"xtal", "axg_ao_clk81", "fclk_div4", "fclk_div5"
+};
+
+static const struct meson_pwm_data pwm_axg_ao_data = {
+	.parent_names = pwm_axg_ao_parent_names,
+	.num_parents = ARRAY_SIZE(pwm_axg_ao_parent_names),
+};
+
+static const char * const pwm_g12a_ao_ab_parent_names[] = {
+	"xtal", "g12a_ao_clk81", "fclk_div4", "fclk_div5"
+};
+
+static const struct meson_pwm_data pwm_g12a_ao_ab_data = {
+	.parent_names = pwm_g12a_ao_ab_parent_names,
+	.num_parents = ARRAY_SIZE(pwm_g12a_ao_ab_parent_names),
+};
+
+static const char * const pwm_g12a_ao_cd_parent_names[] = {
+	"xtal", "g12a_ao_clk81",
+};
+
+static const struct meson_pwm_data pwm_g12a_ao_cd_data = {
+	.parent_names = pwm_g12a_ao_cd_parent_names,
+	.num_parents = ARRAY_SIZE(pwm_g12a_ao_cd_parent_names),
+};
+
+static const char * const pwm_g12a_ee_parent_names[] = {
+	"xtal", "hdmi_pll", "fclk_div4", "fclk_div3"
+};
+
+static const struct meson_pwm_data pwm_g12a_ee_data = {
+	.parent_names = pwm_g12a_ee_parent_names,
+	.num_parents = ARRAY_SIZE(pwm_g12a_ee_parent_names),
+};
+
+static const struct of_device_id meson_pwm_matches[] = {
+	{
+		.compatible = "amlogic,meson8b-pwm",
+		.data = &pwm_meson8b_data
+	},
+	{
+		.compatible = "amlogic,meson-gxbb-pwm",
+		.data = &pwm_gxbb_data
+	},
+	{
+		.compatible = "amlogic,meson-gxbb-ao-pwm",
+		.data = &pwm_gxbb_ao_data
+	},
+	{
+		.compatible = "amlogic,meson-axg-ee-pwm",
+		.data = &pwm_axg_ee_data
+	},
+	{
+		.compatible = "amlogic,meson-axg-ao-pwm",
+		.data = &pwm_axg_ao_data
+	},
+	{
+		.compatible = "amlogic,meson-g12a-ee-pwm",
+		.data = &pwm_g12a_ee_data
+	},
+	{
+		.compatible = "amlogic,meson-g12a-ao-pwm-ab",
+		.data = &pwm_g12a_ao_ab_data
+	},
+	{
+		.compatible = "amlogic,meson-g12a-ao-pwm-cd",
+		.data = &pwm_g12a_ao_cd_data
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, meson_pwm_matches);
+
+static int meson_pwm_init_channels(struct meson_pwm *meson)
+{
+	struct device *dev = meson->chip.dev;
+	struct clk_init_data init;
+	unsigned int i;
+	char name[255];
+	int err;
+
+	for (i = 0; i < meson->chip.npwm; i++) {
+		struct meson_pwm_channel *channel = &meson->channels[i];
+
+		snprintf(name, sizeof(name), "%s#mux%u", dev_name(dev), i);
+
+		init.name = name;
+		init.ops = &clk_mux_ops;
+		init.flags = 0;
+		init.parent_names = meson->data->parent_names;
+		init.num_parents = meson->data->num_parents;
+
+		channel->mux.reg = meson->base + REG_MISC_AB;
+		channel->mux.shift =
+				meson_pwm_per_channel_data[i].clk_sel_shift;
+		channel->mux.mask = MISC_CLK_SEL_MASK;
+		channel->mux.flags = 0;
+		channel->mux.lock = &meson->lock;
+		channel->mux.table = NULL;
+		channel->mux.hw.init = &init;
+
+		channel->clk = devm_clk_register(dev, &channel->mux.hw);
+		if (IS_ERR(channel->clk)) {
+			err = PTR_ERR(channel->clk);
+			dev_err(dev, "failed to register %s: %d\n", name, err);
+			return err;
+		}
+
+		snprintf(name, sizeof(name), "clkin%u", i);
+
+		channel->clk_parent = devm_clk_get_optional(dev, name);
+		if (IS_ERR(channel->clk_parent))
+			return PTR_ERR(channel->clk_parent);
+	}
+
+	return 0;
+}
+
+static int meson_pwm_probe(struct platform_device *pdev)
+{
+	struct meson_pwm *meson;
+	int err;
+
+	meson = devm_kzalloc(&pdev->dev, sizeof(*meson), GFP_KERNEL);
+	if (!meson)
+		return -ENOMEM;
+
+	meson->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(meson->base))
+		return PTR_ERR(meson->base);
+
+	spin_lock_init(&meson->lock);
+	meson->chip.dev = &pdev->dev;
+	meson->chip.ops = &meson_pwm_ops;
+	meson->chip.npwm = MESON_NUM_PWMS;
+
+	meson->data = of_device_get_match_data(&pdev->dev);
+
+	err = meson_pwm_init_channels(meson);
+	if (err < 0)
+		return err;
+
+	err = devm_pwmchip_add(&pdev->dev, &meson->chip);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to register PWM chip: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static struct platform_driver meson_pwm_driver = {
+	.driver = {
+		.name = "meson-pwm",
+		.of_match_table = meson_pwm_matches,
+	},
+	.probe = meson_pwm_probe,
+};
+module_platform_driver(meson_pwm_driver);
+
+MODULE_DESCRIPTION("Amlogic Meson PWM Generator driver");
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
new file mode 100644
index 000000000..db286284f
--- /dev/null
+++ b/drivers/pwm/pwm-mtk-disp.c
@@ -0,0 +1,332 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MediaTek display pulse-width-modulation controller driver.
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: YH Huang <yh.huang@mediatek.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+#define DISP_PWM_EN		0x00
+
+#define PWM_CLKDIV_SHIFT	16
+#define PWM_CLKDIV_MAX		0x3ff
+#define PWM_CLKDIV_MASK		(PWM_CLKDIV_MAX << PWM_CLKDIV_SHIFT)
+
+#define PWM_PERIOD_BIT_WIDTH	12
+#define PWM_PERIOD_MASK		((1 << PWM_PERIOD_BIT_WIDTH) - 1)
+
+#define PWM_HIGH_WIDTH_SHIFT	16
+#define PWM_HIGH_WIDTH_MASK	(0x1fff << PWM_HIGH_WIDTH_SHIFT)
+
+struct mtk_pwm_data {
+	u32 enable_mask;
+	unsigned int con0;
+	u32 con0_sel;
+	unsigned int con1;
+
+	bool has_commit;
+	unsigned int commit;
+	unsigned int commit_mask;
+
+	unsigned int bls_debug;
+	u32 bls_debug_mask;
+};
+
+struct mtk_disp_pwm {
+	struct pwm_chip chip;
+	const struct mtk_pwm_data *data;
+	struct clk *clk_main;
+	struct clk *clk_mm;
+	void __iomem *base;
+	bool enabled;
+};
+
+static inline struct mtk_disp_pwm *to_mtk_disp_pwm(struct pwm_chip *chip)
+{
+	return container_of(chip, struct mtk_disp_pwm, chip);
+}
+
+static void mtk_disp_pwm_update_bits(struct mtk_disp_pwm *mdp, u32 offset,
+				     u32 mask, u32 data)
+{
+	void __iomem *address = mdp->base + offset;
+	u32 value;
+
+	value = readl(address);
+	value &= ~mask;
+	value |= data;
+	writel(value, address);
+}
+
+static int mtk_disp_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			      const struct pwm_state *state)
+{
+	struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
+	u32 clk_div, period, high_width, value;
+	u64 div, rate;
+	int err;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled && mdp->enabled) {
+		mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN,
+					 mdp->data->enable_mask, 0x0);
+		clk_disable_unprepare(mdp->clk_mm);
+		clk_disable_unprepare(mdp->clk_main);
+
+		mdp->enabled = false;
+		return 0;
+	}
+
+	if (!mdp->enabled) {
+		err = clk_prepare_enable(mdp->clk_main);
+		if (err < 0) {
+			dev_err(chip->dev, "Can't enable mdp->clk_main: %pe\n",
+				ERR_PTR(err));
+			return err;
+		}
+
+		err = clk_prepare_enable(mdp->clk_mm);
+		if (err < 0) {
+			dev_err(chip->dev, "Can't enable mdp->clk_mm: %pe\n",
+				ERR_PTR(err));
+			clk_disable_unprepare(mdp->clk_main);
+			return err;
+		}
+	}
+
+	/*
+	 * Find period, high_width and clk_div to suit duty_ns and period_ns.
+	 * Calculate proper div value to keep period value in the bound.
+	 *
+	 * period_ns = 10^9 * (clk_div + 1) * (period + 1) / PWM_CLK_RATE
+	 * duty_ns = 10^9 * (clk_div + 1) * high_width / PWM_CLK_RATE
+	 *
+	 * period = (PWM_CLK_RATE * period_ns) / (10^9 * (clk_div + 1)) - 1
+	 * high_width = (PWM_CLK_RATE * duty_ns) / (10^9 * (clk_div + 1))
+	 */
+	rate = clk_get_rate(mdp->clk_main);
+	clk_div = mul_u64_u64_div_u64(state->period, rate, NSEC_PER_SEC) >>
+			  PWM_PERIOD_BIT_WIDTH;
+	if (clk_div > PWM_CLKDIV_MAX) {
+		if (!mdp->enabled) {
+			clk_disable_unprepare(mdp->clk_mm);
+			clk_disable_unprepare(mdp->clk_main);
+		}
+		return -EINVAL;
+	}
+
+	div = NSEC_PER_SEC * (clk_div + 1);
+	period = mul_u64_u64_div_u64(state->period, rate, div);
+	if (period > 0)
+		period--;
+
+	high_width = mul_u64_u64_div_u64(state->duty_cycle, rate, div);
+	value = period | (high_width << PWM_HIGH_WIDTH_SHIFT);
+
+	if (mdp->data->bls_debug && !mdp->data->has_commit) {
+		/*
+		 * For MT2701, disable double buffer before writing register
+		 * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH.
+		 */
+		mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
+					 mdp->data->bls_debug_mask,
+					 mdp->data->bls_debug_mask);
+		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+					 mdp->data->con0_sel,
+					 mdp->data->con0_sel);
+	}
+
+	mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+				 PWM_CLKDIV_MASK,
+				 clk_div << PWM_CLKDIV_SHIFT);
+	mtk_disp_pwm_update_bits(mdp, mdp->data->con1,
+				 PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK,
+				 value);
+
+	if (mdp->data->has_commit) {
+		mtk_disp_pwm_update_bits(mdp, mdp->data->commit,
+					 mdp->data->commit_mask,
+					 mdp->data->commit_mask);
+		mtk_disp_pwm_update_bits(mdp, mdp->data->commit,
+					 mdp->data->commit_mask,
+					 0x0);
+	}
+
+	mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
+				 mdp->data->enable_mask);
+	mdp->enabled = true;
+
+	return 0;
+}
+
+static int mtk_disp_pwm_get_state(struct pwm_chip *chip,
+				  struct pwm_device *pwm,
+				  struct pwm_state *state)
+{
+	struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
+	u64 rate, period, high_width;
+	u32 clk_div, pwm_en, con0, con1;
+	int err;
+
+	err = clk_prepare_enable(mdp->clk_main);
+	if (err < 0) {
+		dev_err(chip->dev, "Can't enable mdp->clk_main: %pe\n", ERR_PTR(err));
+		return 0;
+	}
+
+	err = clk_prepare_enable(mdp->clk_mm);
+	if (err < 0) {
+		dev_err(chip->dev, "Can't enable mdp->clk_mm: %pe\n", ERR_PTR(err));
+		clk_disable_unprepare(mdp->clk_main);
+		return 0;
+	}
+
+	/*
+	 * Apply DISP_PWM_DEBUG settings to choose whether to enable or disable
+	 * registers double buffer and manual commit to working register before
+	 * performing any read/write operation
+	 */
+	if (mdp->data->bls_debug)
+		mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
+					 mdp->data->bls_debug_mask,
+					 mdp->data->bls_debug_mask);
+
+	rate = clk_get_rate(mdp->clk_main);
+	con0 = readl(mdp->base + mdp->data->con0);
+	con1 = readl(mdp->base + mdp->data->con1);
+	pwm_en = readl(mdp->base + DISP_PWM_EN);
+	state->enabled = !!(pwm_en & mdp->data->enable_mask);
+	clk_div = FIELD_GET(PWM_CLKDIV_MASK, con0);
+	period = FIELD_GET(PWM_PERIOD_MASK, con1);
+	/*
+	 * period has 12 bits, clk_div 11 and NSEC_PER_SEC has 30,
+	 * so period * (clk_div + 1) * NSEC_PER_SEC doesn't overflow.
+	 */
+	state->period = DIV64_U64_ROUND_UP(period * (clk_div + 1) * NSEC_PER_SEC, rate);
+	high_width = FIELD_GET(PWM_HIGH_WIDTH_MASK, con1);
+	state->duty_cycle = DIV64_U64_ROUND_UP(high_width * (clk_div + 1) * NSEC_PER_SEC,
+					       rate);
+	state->polarity = PWM_POLARITY_NORMAL;
+	clk_disable_unprepare(mdp->clk_mm);
+	clk_disable_unprepare(mdp->clk_main);
+
+	return 0;
+}
+
+static const struct pwm_ops mtk_disp_pwm_ops = {
+	.apply = mtk_disp_pwm_apply,
+	.get_state = mtk_disp_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static int mtk_disp_pwm_probe(struct platform_device *pdev)
+{
+	struct mtk_disp_pwm *mdp;
+	int ret;
+
+	mdp = devm_kzalloc(&pdev->dev, sizeof(*mdp), GFP_KERNEL);
+	if (!mdp)
+		return -ENOMEM;
+
+	mdp->data = of_device_get_match_data(&pdev->dev);
+
+	mdp->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(mdp->base))
+		return PTR_ERR(mdp->base);
+
+	mdp->clk_main = devm_clk_get(&pdev->dev, "main");
+	if (IS_ERR(mdp->clk_main))
+		return PTR_ERR(mdp->clk_main);
+
+	mdp->clk_mm = devm_clk_get(&pdev->dev, "mm");
+	if (IS_ERR(mdp->clk_mm))
+		return PTR_ERR(mdp->clk_mm);
+
+	mdp->chip.dev = &pdev->dev;
+	mdp->chip.ops = &mtk_disp_pwm_ops;
+	mdp->chip.npwm = 1;
+
+	ret = pwmchip_add(&mdp->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "pwmchip_add() failed: %pe\n", ERR_PTR(ret));
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, mdp);
+
+	return 0;
+}
+
+static int mtk_disp_pwm_remove(struct platform_device *pdev)
+{
+	struct mtk_disp_pwm *mdp = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&mdp->chip);
+
+	return 0;
+}
+
+static const struct mtk_pwm_data mt2701_pwm_data = {
+	.enable_mask = BIT(16),
+	.con0 = 0xa8,
+	.con0_sel = 0x2,
+	.con1 = 0xac,
+	.has_commit = false,
+	.bls_debug = 0xb0,
+	.bls_debug_mask = 0x3,
+};
+
+static const struct mtk_pwm_data mt8173_pwm_data = {
+	.enable_mask = BIT(0),
+	.con0 = 0x10,
+	.con0_sel = 0x0,
+	.con1 = 0x14,
+	.has_commit = true,
+	.commit = 0x8,
+	.commit_mask = 0x1,
+};
+
+static const struct mtk_pwm_data mt8183_pwm_data = {
+	.enable_mask = BIT(0),
+	.con0 = 0x18,
+	.con0_sel = 0x0,
+	.con1 = 0x1c,
+	.has_commit = false,
+	.bls_debug = 0x80,
+	.bls_debug_mask = 0x3,
+};
+
+static const struct of_device_id mtk_disp_pwm_of_match[] = {
+	{ .compatible = "mediatek,mt2701-disp-pwm", .data = &mt2701_pwm_data},
+	{ .compatible = "mediatek,mt6595-disp-pwm", .data = &mt8173_pwm_data},
+	{ .compatible = "mediatek,mt8173-disp-pwm", .data = &mt8173_pwm_data},
+	{ .compatible = "mediatek,mt8183-disp-pwm", .data = &mt8183_pwm_data},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mtk_disp_pwm_of_match);
+
+static struct platform_driver mtk_disp_pwm_driver = {
+	.driver = {
+		.name = "mediatek-disp-pwm",
+		.of_match_table = mtk_disp_pwm_of_match,
+	},
+	.probe = mtk_disp_pwm_probe,
+	.remove = mtk_disp_pwm_remove,
+};
+module_platform_driver(mtk_disp_pwm_driver);
+
+MODULE_AUTHOR("YH Huang <yh.huang@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek SoC display PWM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-mxs.c b/drivers/pwm/pwm-mxs.c
new file mode 100644
index 000000000..766dbc58d
--- /dev/null
+++ b/drivers/pwm/pwm-mxs.c
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/stmp_device.h>
+
+#define SET	0x4
+#define CLR	0x8
+#define TOG	0xc
+
+#define PWM_CTRL		0x0
+#define PWM_ACTIVE0		0x10
+#define PWM_PERIOD0		0x20
+#define  PERIOD_PERIOD(p)	((p) & 0xffff)
+#define  PERIOD_PERIOD_MAX	0x10000
+#define  PERIOD_ACTIVE_HIGH	(3 << 16)
+#define  PERIOD_ACTIVE_LOW	(2 << 16)
+#define  PERIOD_INACTIVE_HIGH	(3 << 18)
+#define  PERIOD_INACTIVE_LOW	(2 << 18)
+#define  PERIOD_POLARITY_NORMAL	(PERIOD_ACTIVE_HIGH | PERIOD_INACTIVE_LOW)
+#define  PERIOD_POLARITY_INVERSE	(PERIOD_ACTIVE_LOW | PERIOD_INACTIVE_HIGH)
+#define  PERIOD_CDIV(div)	(((div) & 0x7) << 20)
+#define  PERIOD_CDIV_MAX	8
+
+static const u8 cdiv_shift[PERIOD_CDIV_MAX] = {
+	0, 1, 2, 3, 4, 6, 8, 10
+};
+
+struct mxs_pwm_chip {
+	struct pwm_chip chip;
+	struct clk *clk;
+	void __iomem *base;
+};
+
+#define to_mxs_pwm_chip(_chip) container_of(_chip, struct mxs_pwm_chip, chip)
+
+static int mxs_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			 const struct pwm_state *state)
+{
+	struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip);
+	int ret, div = 0;
+	unsigned int period_cycles, duty_cycles;
+	unsigned long rate;
+	unsigned long long c;
+	unsigned int pol_bits;
+
+	/*
+	 * If the PWM channel is disabled, make sure to turn on the
+	 * clock before calling clk_get_rate() and writing to the
+	 * registers. Otherwise, just keep it enabled.
+	 */
+	if (!pwm_is_enabled(pwm)) {
+		ret = clk_prepare_enable(mxs->clk);
+		if (ret)
+			return ret;
+	}
+
+	if (!state->enabled && pwm_is_enabled(pwm))
+		writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + CLR);
+
+	rate = clk_get_rate(mxs->clk);
+	while (1) {
+		c = rate >> cdiv_shift[div];
+		c = c * state->period;
+		do_div(c, 1000000000);
+		if (c < PERIOD_PERIOD_MAX)
+			break;
+		div++;
+		if (div >= PERIOD_CDIV_MAX)
+			return -EINVAL;
+	}
+
+	period_cycles = c;
+	c *= state->duty_cycle;
+	do_div(c, state->period);
+	duty_cycles = c;
+
+	/*
+	 * The data sheet the says registers must be written to in
+	 * this order (ACTIVEn, then PERIODn). Also, the new settings
+	 * only take effect at the beginning of a new period, avoiding
+	 * glitches.
+	 */
+
+	pol_bits = state->polarity == PWM_POLARITY_NORMAL ?
+		PERIOD_POLARITY_NORMAL : PERIOD_POLARITY_INVERSE;
+	writel(duty_cycles << 16,
+	       mxs->base + PWM_ACTIVE0 + pwm->hwpwm * 0x20);
+	writel(PERIOD_PERIOD(period_cycles) | pol_bits | PERIOD_CDIV(div),
+	       mxs->base + PWM_PERIOD0 + pwm->hwpwm * 0x20);
+
+	if (state->enabled) {
+		if (!pwm_is_enabled(pwm)) {
+			/*
+			 * The clock was enabled above. Just enable
+			 * the channel in the control register.
+			 */
+			writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + SET);
+		}
+	} else {
+		clk_disable_unprepare(mxs->clk);
+	}
+	return 0;
+}
+
+static const struct pwm_ops mxs_pwm_ops = {
+	.apply = mxs_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static int mxs_pwm_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct mxs_pwm_chip *mxs;
+	int ret;
+
+	mxs = devm_kzalloc(&pdev->dev, sizeof(*mxs), GFP_KERNEL);
+	if (!mxs)
+		return -ENOMEM;
+
+	mxs->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(mxs->base))
+		return PTR_ERR(mxs->base);
+
+	mxs->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(mxs->clk))
+		return PTR_ERR(mxs->clk);
+
+	mxs->chip.dev = &pdev->dev;
+	mxs->chip.ops = &mxs_pwm_ops;
+
+	ret = of_property_read_u32(np, "fsl,pwm-number", &mxs->chip.npwm);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to get pwm number: %d\n", ret);
+		return ret;
+	}
+
+	/* FIXME: Only do this if the PWM isn't already running */
+	ret = stmp_reset_block(mxs->base);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "failed to reset PWM\n");
+
+	ret = devm_pwmchip_add(&pdev->dev, &mxs->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add pwm chip %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id mxs_pwm_dt_ids[] = {
+	{ .compatible = "fsl,imx23-pwm", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_pwm_dt_ids);
+
+static struct platform_driver mxs_pwm_driver = {
+	.driver = {
+		.name = "mxs-pwm",
+		.of_match_table = mxs_pwm_dt_ids,
+	},
+	.probe = mxs_pwm_probe,
+};
+module_platform_driver(mxs_pwm_driver);
+
+MODULE_ALIAS("platform:mxs-pwm");
+MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
+MODULE_DESCRIPTION("Freescale MXS PWM Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-ntxec.c b/drivers/pwm/pwm-ntxec.c
new file mode 100644
index 000000000..ab63b081d
--- /dev/null
+++ b/drivers/pwm/pwm-ntxec.c
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * The Netronix embedded controller is a microcontroller found in some
+ * e-book readers designed by the original design manufacturer Netronix, Inc.
+ * It contains RTC, battery monitoring, system power management, and PWM
+ * functionality.
+ *
+ * This driver implements PWM output.
+ *
+ * Copyright 2020 Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+ *
+ * Limitations:
+ * - The get_state callback is not implemented, because the current state of
+ *   the PWM output can't be read back from the hardware.
+ * - The hardware can only generate normal polarity output.
+ * - The period and duty cycle can't be changed together in one atomic action.
+ */
+
+#include <linux/mfd/ntxec.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+struct ntxec_pwm {
+	struct device *dev;
+	struct ntxec *ec;
+	struct pwm_chip chip;
+};
+
+static struct ntxec_pwm *ntxec_pwm_from_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct ntxec_pwm, chip);
+}
+
+#define NTXEC_REG_AUTO_OFF_HI	0xa1
+#define NTXEC_REG_AUTO_OFF_LO	0xa2
+#define NTXEC_REG_ENABLE	0xa3
+#define NTXEC_REG_PERIOD_LOW	0xa4
+#define NTXEC_REG_PERIOD_HIGH	0xa5
+#define NTXEC_REG_DUTY_LOW	0xa6
+#define NTXEC_REG_DUTY_HIGH	0xa7
+
+/*
+ * The time base used in the EC is 8MHz, or 125ns. Period and duty cycle are
+ * measured in this unit.
+ */
+#define TIME_BASE_NS 125
+
+/*
+ * The maximum input value (in nanoseconds) is determined by the time base and
+ * the range of the hardware registers that hold the converted value.
+ * It fits into 32 bits, so we can do our calculations in 32 bits as well.
+ */
+#define MAX_PERIOD_NS (TIME_BASE_NS * 0xffff)
+
+static int ntxec_pwm_set_raw_period_and_duty_cycle(struct pwm_chip *chip,
+						   int period, int duty)
+{
+	struct ntxec_pwm *priv = ntxec_pwm_from_chip(chip);
+
+	/*
+	 * Changes to the period and duty cycle take effect as soon as the
+	 * corresponding low byte is written, so the hardware may be configured
+	 * to an inconsistent state after the period is written and before the
+	 * duty cycle is fully written. If, in such a case, the old duty cycle
+	 * is longer than the new period, the EC may output 100% for a moment.
+	 *
+	 * To minimize the time between the changes to period and duty cycle
+	 * taking effect, the writes are interleaved.
+	 */
+
+	struct reg_sequence regs[] = {
+		{ NTXEC_REG_PERIOD_HIGH, ntxec_reg8(period >> 8) },
+		{ NTXEC_REG_DUTY_HIGH, ntxec_reg8(duty >> 8) },
+		{ NTXEC_REG_PERIOD_LOW, ntxec_reg8(period) },
+		{ NTXEC_REG_DUTY_LOW, ntxec_reg8(duty) },
+	};
+
+	return regmap_multi_reg_write(priv->ec->regmap, regs, ARRAY_SIZE(regs));
+}
+
+static int ntxec_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm_dev,
+			   const struct pwm_state *state)
+{
+	struct ntxec_pwm *priv = ntxec_pwm_from_chip(chip);
+	unsigned int period, duty;
+	int res;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	period = min_t(u64, state->period, MAX_PERIOD_NS);
+	duty   = min_t(u64, state->duty_cycle, period);
+
+	period /= TIME_BASE_NS;
+	duty   /= TIME_BASE_NS;
+
+	/*
+	 * Writing a duty cycle of zero puts the device into a state where
+	 * writing a higher duty cycle doesn't result in the brightness that it
+	 * usually results in. This can be fixed by cycling the ENABLE register.
+	 *
+	 * As a workaround, write ENABLE=0 when the duty cycle is zero.
+	 * The case that something has previously set the duty cycle to zero
+	 * but ENABLE=1, is not handled.
+	 */
+	if (state->enabled && duty != 0) {
+		res = ntxec_pwm_set_raw_period_and_duty_cycle(chip, period, duty);
+		if (res)
+			return res;
+
+		res = regmap_write(priv->ec->regmap, NTXEC_REG_ENABLE, ntxec_reg8(1));
+		if (res)
+			return res;
+
+		/* Disable the auto-off timer */
+		res = regmap_write(priv->ec->regmap, NTXEC_REG_AUTO_OFF_HI, ntxec_reg8(0xff));
+		if (res)
+			return res;
+
+		return regmap_write(priv->ec->regmap, NTXEC_REG_AUTO_OFF_LO, ntxec_reg8(0xff));
+	} else {
+		return regmap_write(priv->ec->regmap, NTXEC_REG_ENABLE, ntxec_reg8(0));
+	}
+}
+
+static const struct pwm_ops ntxec_pwm_ops = {
+	.owner = THIS_MODULE,
+	.apply = ntxec_pwm_apply,
+	/*
+	 * No .get_state callback, because the current state cannot be read
+	 * back from the hardware.
+	 */
+};
+
+static int ntxec_pwm_probe(struct platform_device *pdev)
+{
+	struct ntxec *ec = dev_get_drvdata(pdev->dev.parent);
+	struct ntxec_pwm *priv;
+	struct pwm_chip *chip;
+
+	pdev->dev.of_node = pdev->dev.parent->of_node;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->ec = ec;
+	priv->dev = &pdev->dev;
+
+	chip = &priv->chip;
+	chip->dev = &pdev->dev;
+	chip->ops = &ntxec_pwm_ops;
+	chip->npwm = 1;
+
+	return devm_pwmchip_add(&pdev->dev, chip);
+}
+
+static struct platform_driver ntxec_pwm_driver = {
+	.driver = {
+		.name = "ntxec-pwm",
+	},
+	.probe = ntxec_pwm_probe,
+};
+module_platform_driver(ntxec_pwm_driver);
+
+MODULE_AUTHOR("Jonathan Neuschäfer <j.neuschaefer@gmx.net>");
+MODULE_DESCRIPTION("PWM driver for Netronix EC");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ntxec-pwm");
diff --git a/drivers/pwm/pwm-omap-dmtimer.c b/drivers/pwm/pwm-omap-dmtimer.c
new file mode 100644
index 000000000..fa800fcf3
--- /dev/null
+++ b/drivers/pwm/pwm-omap-dmtimer.c
@@ -0,0 +1,482 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015 Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2014 Joachim Eastwood <manabian@gmail.com>
+ * Copyright (c) 2012 NeilBrown <neilb@suse.de>
+ * Heavily based on earlier code which is:
+ * Copyright (c) 2010 Grant Erickson <marathon96@gmail.com>
+ *
+ * Also based on pwm-samsung.c
+ *
+ * Description:
+ *   This file is the core OMAP support for the generic, Linux
+ *   PWM driver / controller, using the OMAP's dual-mode timers
+ *   with a timer counter that goes up. When it overflows it gets
+ *   reloaded with the load value and the pwm output goes up.
+ *   When counter matches with match register, the output goes down.
+ *   Reference Manual: https://www.ti.com/lit/ug/spruh73q/spruh73q.pdf
+ *
+ * Limitations:
+ * - When PWM is stopped, timer counter gets stopped immediately. This
+ *   doesn't allow the current PWM period to complete and stops abruptly.
+ * - When PWM is running and changing both duty cycle and period,
+ *   we cannot prevent in software that the output might produce
+ *   a period with mixed settings. Especially when period/duty_cyle
+ *   is updated while the pwm pin is high, current pwm period/duty_cycle
+ *   can get updated as below based on the current timer counter:
+ *   	- period for current cycle =  current_period + new period
+ *   	- duty_cycle for current period = current period + new duty_cycle.
+ * - PWM OMAP DM timer cannot change the polarity when pwm is active. When
+ *   user requests a change in polarity when in active state:
+ *	- PWM is stopped abruptly(without completing the current cycle)
+ *	- Polarity is changed
+ *	- A fresh cycle is started.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <clocksource/timer-ti-dm.h>
+#include <linux/platform_data/dmtimer-omap.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+
+#define DM_TIMER_LOAD_MIN 0xfffffffe
+#define DM_TIMER_MAX      0xffffffff
+
+/**
+ * struct pwm_omap_dmtimer_chip - Structure representing a pwm chip
+ *				  corresponding to omap dmtimer.
+ * @chip:		PWM chip structure representing PWM controller
+ * @mutex:		Mutex to protect pwm apply state
+ * @dm_timer:		Pointer to omap dm timer.
+ * @pdata:		Pointer to omap dm timer ops.
+ * @dm_timer_pdev:	Pointer to omap dm timer platform device
+ */
+struct pwm_omap_dmtimer_chip {
+	struct pwm_chip chip;
+	/* Mutex to protect pwm apply state */
+	struct mutex mutex;
+	struct omap_dm_timer *dm_timer;
+	const struct omap_dm_timer_ops *pdata;
+	struct platform_device *dm_timer_pdev;
+};
+
+static inline struct pwm_omap_dmtimer_chip *
+to_pwm_omap_dmtimer_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct pwm_omap_dmtimer_chip, chip);
+}
+
+/**
+ * pwm_omap_dmtimer_get_clock_cycles() - Get clock cycles in a time frame
+ * @clk_rate:	pwm timer clock rate
+ * @ns:		time frame in nano seconds.
+ *
+ * Return number of clock cycles in a given period(ins ns).
+ */
+static u32 pwm_omap_dmtimer_get_clock_cycles(unsigned long clk_rate, int ns)
+{
+	return DIV_ROUND_CLOSEST_ULL((u64)clk_rate * ns, NSEC_PER_SEC);
+}
+
+/**
+ * pwm_omap_dmtimer_start() - Start the pwm omap dm timer in pwm mode
+ * @omap:	Pointer to pwm omap dm timer chip
+ */
+static void pwm_omap_dmtimer_start(struct pwm_omap_dmtimer_chip *omap)
+{
+	/*
+	 * According to OMAP 4 TRM section 22.2.4.10 the counter should be
+	 * started at 0xFFFFFFFE when overflow and match is used to ensure
+	 * that the PWM line is toggled on the first event.
+	 *
+	 * Note that omap_dm_timer_enable/disable is for register access and
+	 * not the timer counter itself.
+	 */
+	omap->pdata->enable(omap->dm_timer);
+	omap->pdata->write_counter(omap->dm_timer, DM_TIMER_LOAD_MIN);
+	omap->pdata->disable(omap->dm_timer);
+
+	omap->pdata->start(omap->dm_timer);
+}
+
+/**
+ * pwm_omap_dmtimer_is_enabled() -  Detect if the pwm is enabled.
+ * @omap:	Pointer to pwm omap dm timer chip
+ *
+ * Return true if pwm is enabled else false.
+ */
+static bool pwm_omap_dmtimer_is_enabled(struct pwm_omap_dmtimer_chip *omap)
+{
+	u32 status;
+
+	status = omap->pdata->get_pwm_status(omap->dm_timer);
+
+	return !!(status & OMAP_TIMER_CTRL_ST);
+}
+
+/**
+ * pwm_omap_dmtimer_polarity() -  Detect the polarity of pwm.
+ * @omap:	Pointer to pwm omap dm timer chip
+ *
+ * Return the polarity of pwm.
+ */
+static int pwm_omap_dmtimer_polarity(struct pwm_omap_dmtimer_chip *omap)
+{
+	u32 status;
+
+	status = omap->pdata->get_pwm_status(omap->dm_timer);
+
+	return !!(status & OMAP_TIMER_CTRL_SCPWM);
+}
+
+/**
+ * pwm_omap_dmtimer_config() - Update the configuration of pwm omap dm timer
+ * @chip:	Pointer to PWM controller
+ * @pwm:	Pointer to PWM channel
+ * @duty_ns:	New duty cycle in nano seconds
+ * @period_ns:	New period in nano seconds
+ *
+ * Return 0 if successfully changed the period/duty_cycle else appropriate
+ * error.
+ */
+static int pwm_omap_dmtimer_config(struct pwm_chip *chip,
+				   struct pwm_device *pwm,
+				   int duty_ns, int period_ns)
+{
+	struct pwm_omap_dmtimer_chip *omap = to_pwm_omap_dmtimer_chip(chip);
+	u32 period_cycles, duty_cycles;
+	u32 load_value, match_value;
+	unsigned long clk_rate;
+	struct clk *fclk;
+
+	dev_dbg(chip->dev, "requested duty cycle: %d ns, period: %d ns\n",
+		duty_ns, period_ns);
+
+	if (duty_ns == pwm_get_duty_cycle(pwm) &&
+	    period_ns == pwm_get_period(pwm))
+		return 0;
+
+	fclk = omap->pdata->get_fclk(omap->dm_timer);
+	if (!fclk) {
+		dev_err(chip->dev, "invalid pmtimer fclk\n");
+		return -EINVAL;
+	}
+
+	clk_rate = clk_get_rate(fclk);
+	if (!clk_rate) {
+		dev_err(chip->dev, "invalid pmtimer fclk rate\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(chip->dev, "clk rate: %luHz\n", clk_rate);
+
+	/*
+	 * Calculate the appropriate load and match values based on the
+	 * specified period and duty cycle. The load value determines the
+	 * period time and the match value determines the duty time.
+	 *
+	 * The period lasts for (DM_TIMER_MAX-load_value+1) clock cycles.
+	 * Similarly, the active time lasts (match_value-load_value+1) cycles.
+	 * The non-active time is the remainder: (DM_TIMER_MAX-match_value)
+	 * clock cycles.
+	 *
+	 * NOTE: It is required that: load_value <= match_value < DM_TIMER_MAX
+	 *
+	 * References:
+	 *   OMAP4430/60/70 TRM sections 22.2.4.10 and 22.2.4.11
+	 *   AM335x Sitara TRM sections 20.1.3.5 and 20.1.3.6
+	 */
+	period_cycles = pwm_omap_dmtimer_get_clock_cycles(clk_rate, period_ns);
+	duty_cycles = pwm_omap_dmtimer_get_clock_cycles(clk_rate, duty_ns);
+
+	if (period_cycles < 2) {
+		dev_info(chip->dev,
+			 "period %d ns too short for clock rate %lu Hz\n",
+			 period_ns, clk_rate);
+		return -EINVAL;
+	}
+
+	if (duty_cycles < 1) {
+		dev_dbg(chip->dev,
+			"duty cycle %d ns is too short for clock rate %lu Hz\n",
+			duty_ns, clk_rate);
+		dev_dbg(chip->dev, "using minimum of 1 clock cycle\n");
+		duty_cycles = 1;
+	} else if (duty_cycles >= period_cycles) {
+		dev_dbg(chip->dev,
+			"duty cycle %d ns is too long for period %d ns at clock rate %lu Hz\n",
+			duty_ns, period_ns, clk_rate);
+		dev_dbg(chip->dev, "using maximum of 1 clock cycle less than period\n");
+		duty_cycles = period_cycles - 1;
+	}
+
+	dev_dbg(chip->dev, "effective duty cycle: %lld ns, period: %lld ns\n",
+		DIV_ROUND_CLOSEST_ULL((u64)NSEC_PER_SEC * duty_cycles,
+				      clk_rate),
+		DIV_ROUND_CLOSEST_ULL((u64)NSEC_PER_SEC * period_cycles,
+				      clk_rate));
+
+	load_value = (DM_TIMER_MAX - period_cycles) + 1;
+	match_value = load_value + duty_cycles - 1;
+
+	omap->pdata->set_load(omap->dm_timer, load_value);
+	omap->pdata->set_match(omap->dm_timer, true, match_value);
+
+	dev_dbg(chip->dev, "load value: %#08x (%d), match value: %#08x (%d)\n",
+		load_value, load_value,	match_value, match_value);
+
+	return 0;
+}
+
+/**
+ * pwm_omap_dmtimer_set_polarity() - Changes the polarity of the pwm dm timer.
+ * @chip:	Pointer to PWM controller
+ * @pwm:	Pointer to PWM channel
+ * @polarity:	New pwm polarity to be set
+ */
+static void pwm_omap_dmtimer_set_polarity(struct pwm_chip *chip,
+					  struct pwm_device *pwm,
+					  enum pwm_polarity polarity)
+{
+	struct pwm_omap_dmtimer_chip *omap = to_pwm_omap_dmtimer_chip(chip);
+	bool enabled;
+
+	/* Disable the PWM before changing the polarity. */
+	enabled = pwm_omap_dmtimer_is_enabled(omap);
+	if (enabled)
+		omap->pdata->stop(omap->dm_timer);
+
+	omap->pdata->set_pwm(omap->dm_timer,
+			     polarity == PWM_POLARITY_INVERSED,
+			     true, OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE,
+			     true);
+
+	if (enabled)
+		pwm_omap_dmtimer_start(omap);
+}
+
+/**
+ * pwm_omap_dmtimer_apply() - Changes the state of the pwm omap dm timer.
+ * @chip:	Pointer to PWM controller
+ * @pwm:	Pointer to PWM channel
+ * @state:	New state to apply
+ *
+ * Return 0 if successfully changed the state else appropriate error.
+ */
+static int pwm_omap_dmtimer_apply(struct pwm_chip *chip,
+				  struct pwm_device *pwm,
+				  const struct pwm_state *state)
+{
+	struct pwm_omap_dmtimer_chip *omap = to_pwm_omap_dmtimer_chip(chip);
+	int ret = 0;
+
+	mutex_lock(&omap->mutex);
+
+	if (pwm_omap_dmtimer_is_enabled(omap) && !state->enabled) {
+		omap->pdata->stop(omap->dm_timer);
+		goto unlock_mutex;
+	}
+
+	if (pwm_omap_dmtimer_polarity(omap) != state->polarity)
+		pwm_omap_dmtimer_set_polarity(chip, pwm, state->polarity);
+
+	ret = pwm_omap_dmtimer_config(chip, pwm, state->duty_cycle,
+				      state->period);
+	if (ret)
+		goto unlock_mutex;
+
+	if (!pwm_omap_dmtimer_is_enabled(omap) && state->enabled) {
+		omap->pdata->set_pwm(omap->dm_timer,
+				     state->polarity == PWM_POLARITY_INVERSED,
+				     true,
+				     OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE,
+				     true);
+		pwm_omap_dmtimer_start(omap);
+	}
+
+unlock_mutex:
+	mutex_unlock(&omap->mutex);
+
+	return ret;
+}
+
+static const struct pwm_ops pwm_omap_dmtimer_ops = {
+	.apply = pwm_omap_dmtimer_apply,
+	.owner = THIS_MODULE,
+};
+
+static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct dmtimer_platform_data *timer_pdata;
+	const struct omap_dm_timer_ops *pdata;
+	struct platform_device *timer_pdev;
+	struct pwm_omap_dmtimer_chip *omap;
+	struct omap_dm_timer *dm_timer;
+	struct device_node *timer;
+	int ret = 0;
+	u32 v;
+
+	timer = of_parse_phandle(np, "ti,timers", 0);
+	if (!timer)
+		return -ENODEV;
+
+	timer_pdev = of_find_device_by_node(timer);
+	if (!timer_pdev) {
+		dev_err(&pdev->dev, "Unable to find Timer pdev\n");
+		ret = -ENODEV;
+		goto err_find_timer_pdev;
+	}
+
+	timer_pdata = dev_get_platdata(&timer_pdev->dev);
+	if (!timer_pdata) {
+		dev_dbg(&pdev->dev,
+			 "dmtimer pdata structure NULL, deferring probe\n");
+		ret = -EPROBE_DEFER;
+		goto err_platdata;
+	}
+
+	pdata = timer_pdata->timer_ops;
+
+	if (!pdata || !pdata->request_by_node ||
+	    !pdata->free ||
+	    !pdata->enable ||
+	    !pdata->disable ||
+	    !pdata->get_fclk ||
+	    !pdata->start ||
+	    !pdata->stop ||
+	    !pdata->set_load ||
+	    !pdata->set_match ||
+	    !pdata->set_pwm ||
+	    !pdata->get_pwm_status ||
+	    !pdata->set_prescaler ||
+	    !pdata->write_counter) {
+		dev_err(&pdev->dev, "Incomplete dmtimer pdata structure\n");
+		ret = -EINVAL;
+		goto err_platdata;
+	}
+
+	if (!of_get_property(timer, "ti,timer-pwm", NULL)) {
+		dev_err(&pdev->dev, "Missing ti,timer-pwm capability\n");
+		ret = -ENODEV;
+		goto err_timer_property;
+	}
+
+	dm_timer = pdata->request_by_node(timer);
+	if (!dm_timer) {
+		ret = -EPROBE_DEFER;
+		goto err_request_timer;
+	}
+
+	omap = devm_kzalloc(&pdev->dev, sizeof(*omap), GFP_KERNEL);
+	if (!omap) {
+		ret = -ENOMEM;
+		goto err_alloc_omap;
+	}
+
+	omap->pdata = pdata;
+	omap->dm_timer = dm_timer;
+	omap->dm_timer_pdev = timer_pdev;
+
+	/*
+	 * Ensure that the timer is stopped before we allow PWM core to call
+	 * pwm_enable.
+	 */
+	if (pm_runtime_active(&omap->dm_timer_pdev->dev))
+		omap->pdata->stop(omap->dm_timer);
+
+	if (!of_property_read_u32(pdev->dev.of_node, "ti,prescaler", &v))
+		omap->pdata->set_prescaler(omap->dm_timer, v);
+
+	/* setup dmtimer clock source */
+	if (!of_property_read_u32(pdev->dev.of_node, "ti,clock-source", &v))
+		omap->pdata->set_source(omap->dm_timer, v);
+
+	omap->chip.dev = &pdev->dev;
+	omap->chip.ops = &pwm_omap_dmtimer_ops;
+	omap->chip.npwm = 1;
+
+	mutex_init(&omap->mutex);
+
+	ret = pwmchip_add(&omap->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to register PWM\n");
+		goto err_pwmchip_add;
+	}
+
+	of_node_put(timer);
+
+	platform_set_drvdata(pdev, omap);
+
+	return 0;
+
+err_pwmchip_add:
+
+	/*
+	 * *omap is allocated using devm_kzalloc,
+	 * so no free necessary here
+	 */
+err_alloc_omap:
+
+	pdata->free(dm_timer);
+err_request_timer:
+
+err_timer_property:
+err_platdata:
+
+	put_device(&timer_pdev->dev);
+err_find_timer_pdev:
+
+	of_node_put(timer);
+
+	return ret;
+}
+
+static int pwm_omap_dmtimer_remove(struct platform_device *pdev)
+{
+	struct pwm_omap_dmtimer_chip *omap = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&omap->chip);
+
+	if (pm_runtime_active(&omap->dm_timer_pdev->dev))
+		omap->pdata->stop(omap->dm_timer);
+
+	omap->pdata->free(omap->dm_timer);
+
+	put_device(&omap->dm_timer_pdev->dev);
+
+	mutex_destroy(&omap->mutex);
+
+	return 0;
+}
+
+static const struct of_device_id pwm_omap_dmtimer_of_match[] = {
+	{.compatible = "ti,omap-dmtimer-pwm"},
+	{}
+};
+MODULE_DEVICE_TABLE(of, pwm_omap_dmtimer_of_match);
+
+static struct platform_driver pwm_omap_dmtimer_driver = {
+	.driver = {
+		.name = "omap-dmtimer-pwm",
+		.of_match_table = of_match_ptr(pwm_omap_dmtimer_of_match),
+	},
+	.probe = pwm_omap_dmtimer_probe,
+	.remove	= pwm_omap_dmtimer_remove,
+};
+module_platform_driver(pwm_omap_dmtimer_driver);
+
+MODULE_AUTHOR("Grant Erickson <marathon96@gmail.com>");
+MODULE_AUTHOR("NeilBrown <neilb@suse.de>");
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("OMAP PWM Driver using Dual-mode Timers");
diff --git a/drivers/pwm/pwm-pca9685.c b/drivers/pwm/pwm-pca9685.c
new file mode 100644
index 000000000..41be244e7
--- /dev/null
+++ b/drivers/pwm/pwm-pca9685.c
@@ -0,0 +1,678 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for PCA9685 16-channel 12-bit PWM LED controller
+ *
+ * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ * Copyright (C) 2015 Clemens Gruber <clemens.gruber@pqgruber.com>
+ *
+ * based on the pwm-twl-led.c driver
+ */
+
+#include <linux/acpi.h>
+#include <linux/gpio/driver.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/pm_runtime.h>
+#include <linux/bitmap.h>
+
+/*
+ * Because the PCA9685 has only one prescaler per chip, only the first channel
+ * that is enabled is allowed to change the prescale register.
+ * PWM channels requested afterwards must use a period that results in the same
+ * prescale setting as the one set by the first requested channel.
+ * GPIOs do not count as enabled PWMs as they are not using the prescaler.
+ */
+
+#define PCA9685_MODE1		0x00
+#define PCA9685_MODE2		0x01
+#define PCA9685_SUBADDR1	0x02
+#define PCA9685_SUBADDR2	0x03
+#define PCA9685_SUBADDR3	0x04
+#define PCA9685_ALLCALLADDR	0x05
+#define PCA9685_LEDX_ON_L	0x06
+#define PCA9685_LEDX_ON_H	0x07
+#define PCA9685_LEDX_OFF_L	0x08
+#define PCA9685_LEDX_OFF_H	0x09
+
+#define PCA9685_ALL_LED_ON_L	0xFA
+#define PCA9685_ALL_LED_ON_H	0xFB
+#define PCA9685_ALL_LED_OFF_L	0xFC
+#define PCA9685_ALL_LED_OFF_H	0xFD
+#define PCA9685_PRESCALE	0xFE
+
+#define PCA9685_PRESCALE_MIN	0x03	/* => max. frequency of 1526 Hz */
+#define PCA9685_PRESCALE_MAX	0xFF	/* => min. frequency of 24 Hz */
+
+#define PCA9685_COUNTER_RANGE	4096
+#define PCA9685_OSC_CLOCK_MHZ	25	/* Internal oscillator with 25 MHz */
+
+#define PCA9685_NUMREGS		0xFF
+#define PCA9685_MAXCHAN		0x10
+
+#define LED_FULL		BIT(4)
+#define MODE1_ALLCALL		BIT(0)
+#define MODE1_SUB3		BIT(1)
+#define MODE1_SUB2		BIT(2)
+#define MODE1_SUB1		BIT(3)
+#define MODE1_SLEEP		BIT(4)
+#define MODE2_INVRT		BIT(4)
+#define MODE2_OUTDRV		BIT(2)
+
+#define LED_N_ON_H(N)	(PCA9685_LEDX_ON_H + (4 * (N)))
+#define LED_N_ON_L(N)	(PCA9685_LEDX_ON_L + (4 * (N)))
+#define LED_N_OFF_H(N)	(PCA9685_LEDX_OFF_H + (4 * (N)))
+#define LED_N_OFF_L(N)	(PCA9685_LEDX_OFF_L + (4 * (N)))
+
+#define REG_ON_H(C)	((C) >= PCA9685_MAXCHAN ? PCA9685_ALL_LED_ON_H : LED_N_ON_H((C)))
+#define REG_ON_L(C)	((C) >= PCA9685_MAXCHAN ? PCA9685_ALL_LED_ON_L : LED_N_ON_L((C)))
+#define REG_OFF_H(C)	((C) >= PCA9685_MAXCHAN ? PCA9685_ALL_LED_OFF_H : LED_N_OFF_H((C)))
+#define REG_OFF_L(C)	((C) >= PCA9685_MAXCHAN ? PCA9685_ALL_LED_OFF_L : LED_N_OFF_L((C)))
+
+struct pca9685 {
+	struct pwm_chip chip;
+	struct regmap *regmap;
+	struct mutex lock;
+	DECLARE_BITMAP(pwms_enabled, PCA9685_MAXCHAN + 1);
+#if IS_ENABLED(CONFIG_GPIOLIB)
+	struct gpio_chip gpio;
+	DECLARE_BITMAP(pwms_inuse, PCA9685_MAXCHAN + 1);
+#endif
+};
+
+static inline struct pca9685 *to_pca(struct pwm_chip *chip)
+{
+	return container_of(chip, struct pca9685, chip);
+}
+
+/* This function is supposed to be called with the lock mutex held */
+static bool pca9685_prescaler_can_change(struct pca9685 *pca, int channel)
+{
+	/* No PWM enabled: Change allowed */
+	if (bitmap_empty(pca->pwms_enabled, PCA9685_MAXCHAN + 1))
+		return true;
+	/* More than one PWM enabled: Change not allowed */
+	if (bitmap_weight(pca->pwms_enabled, PCA9685_MAXCHAN + 1) > 1)
+		return false;
+	/*
+	 * Only one PWM enabled: Change allowed if the PWM about to
+	 * be changed is the one that is already enabled
+	 */
+	return test_bit(channel, pca->pwms_enabled);
+}
+
+static int pca9685_read_reg(struct pca9685 *pca, unsigned int reg, unsigned int *val)
+{
+	struct device *dev = pca->chip.dev;
+	int err;
+
+	err = regmap_read(pca->regmap, reg, val);
+	if (err)
+		dev_err(dev, "regmap_read of register 0x%x failed: %pe\n", reg, ERR_PTR(err));
+
+	return err;
+}
+
+static int pca9685_write_reg(struct pca9685 *pca, unsigned int reg, unsigned int val)
+{
+	struct device *dev = pca->chip.dev;
+	int err;
+
+	err = regmap_write(pca->regmap, reg, val);
+	if (err)
+		dev_err(dev, "regmap_write to register 0x%x failed: %pe\n", reg, ERR_PTR(err));
+
+	return err;
+}
+
+/* Helper function to set the duty cycle ratio to duty/4096 (e.g. duty=2048 -> 50%) */
+static void pca9685_pwm_set_duty(struct pca9685 *pca, int channel, unsigned int duty)
+{
+	struct pwm_device *pwm = &pca->chip.pwms[channel];
+	unsigned int on, off;
+
+	if (duty == 0) {
+		/* Set the full OFF bit, which has the highest precedence */
+		pca9685_write_reg(pca, REG_OFF_H(channel), LED_FULL);
+		return;
+	} else if (duty >= PCA9685_COUNTER_RANGE) {
+		/* Set the full ON bit and clear the full OFF bit */
+		pca9685_write_reg(pca, REG_ON_H(channel), LED_FULL);
+		pca9685_write_reg(pca, REG_OFF_H(channel), 0);
+		return;
+	}
+
+
+	if (pwm->state.usage_power && channel < PCA9685_MAXCHAN) {
+		/*
+		 * If usage_power is set, the pca9685 driver will phase shift
+		 * the individual channels relative to their channel number.
+		 * This improves EMI because the enabled channels no longer
+		 * turn on at the same time, while still maintaining the
+		 * configured duty cycle / power output.
+		 */
+		on = channel * PCA9685_COUNTER_RANGE / PCA9685_MAXCHAN;
+	} else
+		on = 0;
+
+	off = (on + duty) % PCA9685_COUNTER_RANGE;
+
+	/* Set ON time (clears full ON bit) */
+	pca9685_write_reg(pca, REG_ON_L(channel), on & 0xff);
+	pca9685_write_reg(pca, REG_ON_H(channel), (on >> 8) & 0xf);
+	/* Set OFF time (clears full OFF bit) */
+	pca9685_write_reg(pca, REG_OFF_L(channel), off & 0xff);
+	pca9685_write_reg(pca, REG_OFF_H(channel), (off >> 8) & 0xf);
+}
+
+static unsigned int pca9685_pwm_get_duty(struct pca9685 *pca, int channel)
+{
+	struct pwm_device *pwm = &pca->chip.pwms[channel];
+	unsigned int off = 0, on = 0, val = 0;
+
+	if (WARN_ON(channel >= PCA9685_MAXCHAN)) {
+		/* HW does not support reading state of "all LEDs" channel */
+		return 0;
+	}
+
+	pca9685_read_reg(pca, LED_N_OFF_H(channel), &off);
+	if (off & LED_FULL) {
+		/* Full OFF bit is set */
+		return 0;
+	}
+
+	pca9685_read_reg(pca, LED_N_ON_H(channel), &on);
+	if (on & LED_FULL) {
+		/* Full ON bit is set */
+		return PCA9685_COUNTER_RANGE;
+	}
+
+	pca9685_read_reg(pca, LED_N_OFF_L(channel), &val);
+	off = ((off & 0xf) << 8) | (val & 0xff);
+	if (!pwm->state.usage_power)
+		return off;
+
+	/* Read ON register to calculate duty cycle of staggered output */
+	if (pca9685_read_reg(pca, LED_N_ON_L(channel), &val)) {
+		/* Reset val to 0 in case reading LED_N_ON_L failed */
+		val = 0;
+	}
+	on = ((on & 0xf) << 8) | (val & 0xff);
+	return (off - on) & (PCA9685_COUNTER_RANGE - 1);
+}
+
+#if IS_ENABLED(CONFIG_GPIOLIB)
+static bool pca9685_pwm_test_and_set_inuse(struct pca9685 *pca, int pwm_idx)
+{
+	bool is_inuse;
+
+	mutex_lock(&pca->lock);
+	if (pwm_idx >= PCA9685_MAXCHAN) {
+		/*
+		 * "All LEDs" channel:
+		 * pretend already in use if any of the PWMs are requested
+		 */
+		if (!bitmap_empty(pca->pwms_inuse, PCA9685_MAXCHAN)) {
+			is_inuse = true;
+			goto out;
+		}
+	} else {
+		/*
+		 * Regular channel:
+		 * pretend already in use if the "all LEDs" channel is requested
+		 */
+		if (test_bit(PCA9685_MAXCHAN, pca->pwms_inuse)) {
+			is_inuse = true;
+			goto out;
+		}
+	}
+	is_inuse = test_and_set_bit(pwm_idx, pca->pwms_inuse);
+out:
+	mutex_unlock(&pca->lock);
+	return is_inuse;
+}
+
+static void pca9685_pwm_clear_inuse(struct pca9685 *pca, int pwm_idx)
+{
+	mutex_lock(&pca->lock);
+	clear_bit(pwm_idx, pca->pwms_inuse);
+	mutex_unlock(&pca->lock);
+}
+
+static int pca9685_pwm_gpio_request(struct gpio_chip *gpio, unsigned int offset)
+{
+	struct pca9685 *pca = gpiochip_get_data(gpio);
+
+	if (pca9685_pwm_test_and_set_inuse(pca, offset))
+		return -EBUSY;
+	pm_runtime_get_sync(pca->chip.dev);
+	return 0;
+}
+
+static int pca9685_pwm_gpio_get(struct gpio_chip *gpio, unsigned int offset)
+{
+	struct pca9685 *pca = gpiochip_get_data(gpio);
+
+	return pca9685_pwm_get_duty(pca, offset) != 0;
+}
+
+static void pca9685_pwm_gpio_set(struct gpio_chip *gpio, unsigned int offset,
+				 int value)
+{
+	struct pca9685 *pca = gpiochip_get_data(gpio);
+
+	pca9685_pwm_set_duty(pca, offset, value ? PCA9685_COUNTER_RANGE : 0);
+}
+
+static void pca9685_pwm_gpio_free(struct gpio_chip *gpio, unsigned int offset)
+{
+	struct pca9685 *pca = gpiochip_get_data(gpio);
+
+	pca9685_pwm_set_duty(pca, offset, 0);
+	pm_runtime_put(pca->chip.dev);
+	pca9685_pwm_clear_inuse(pca, offset);
+}
+
+static int pca9685_pwm_gpio_get_direction(struct gpio_chip *chip,
+					  unsigned int offset)
+{
+	/* Always out */
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int pca9685_pwm_gpio_direction_input(struct gpio_chip *gpio,
+					    unsigned int offset)
+{
+	return -EINVAL;
+}
+
+static int pca9685_pwm_gpio_direction_output(struct gpio_chip *gpio,
+					     unsigned int offset, int value)
+{
+	pca9685_pwm_gpio_set(gpio, offset, value);
+
+	return 0;
+}
+
+/*
+ * The PCA9685 has a bit for turning the PWM output full off or on. Some
+ * boards like Intel Galileo actually uses these as normal GPIOs so we
+ * expose a GPIO chip here which can exclusively take over the underlying
+ * PWM channel.
+ */
+static int pca9685_pwm_gpio_probe(struct pca9685 *pca)
+{
+	struct device *dev = pca->chip.dev;
+
+	pca->gpio.label = dev_name(dev);
+	pca->gpio.parent = dev;
+	pca->gpio.request = pca9685_pwm_gpio_request;
+	pca->gpio.free = pca9685_pwm_gpio_free;
+	pca->gpio.get_direction = pca9685_pwm_gpio_get_direction;
+	pca->gpio.direction_input = pca9685_pwm_gpio_direction_input;
+	pca->gpio.direction_output = pca9685_pwm_gpio_direction_output;
+	pca->gpio.get = pca9685_pwm_gpio_get;
+	pca->gpio.set = pca9685_pwm_gpio_set;
+	pca->gpio.base = -1;
+	pca->gpio.ngpio = PCA9685_MAXCHAN;
+	pca->gpio.can_sleep = true;
+
+	return devm_gpiochip_add_data(dev, &pca->gpio, pca);
+}
+#else
+static inline bool pca9685_pwm_test_and_set_inuse(struct pca9685 *pca,
+						  int pwm_idx)
+{
+	return false;
+}
+
+static inline void
+pca9685_pwm_clear_inuse(struct pca9685 *pca, int pwm_idx)
+{
+}
+
+static inline int pca9685_pwm_gpio_probe(struct pca9685 *pca)
+{
+	return 0;
+}
+#endif
+
+static void pca9685_set_sleep_mode(struct pca9685 *pca, bool enable)
+{
+	struct device *dev = pca->chip.dev;
+	int err = regmap_update_bits(pca->regmap, PCA9685_MODE1,
+				     MODE1_SLEEP, enable ? MODE1_SLEEP : 0);
+	if (err) {
+		dev_err(dev, "regmap_update_bits of register 0x%x failed: %pe\n",
+			PCA9685_MODE1, ERR_PTR(err));
+		return;
+	}
+
+	if (!enable) {
+		/* Wait 500us for the oscillator to be back up */
+		udelay(500);
+	}
+}
+
+static int __pca9685_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			       const struct pwm_state *state)
+{
+	struct pca9685 *pca = to_pca(chip);
+	unsigned long long duty, prescale;
+	unsigned int val = 0;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	prescale = DIV_ROUND_CLOSEST_ULL(PCA9685_OSC_CLOCK_MHZ * state->period,
+					 PCA9685_COUNTER_RANGE * 1000) - 1;
+	if (prescale < PCA9685_PRESCALE_MIN || prescale > PCA9685_PRESCALE_MAX) {
+		dev_err(chip->dev, "pwm not changed: period out of bounds!\n");
+		return -EINVAL;
+	}
+
+	if (!state->enabled) {
+		pca9685_pwm_set_duty(pca, pwm->hwpwm, 0);
+		return 0;
+	}
+
+	pca9685_read_reg(pca, PCA9685_PRESCALE, &val);
+	if (prescale != val) {
+		if (!pca9685_prescaler_can_change(pca, pwm->hwpwm)) {
+			dev_err(chip->dev,
+				"pwm not changed: periods of enabled pwms must match!\n");
+			return -EBUSY;
+		}
+
+		/*
+		 * Putting the chip briefly into SLEEP mode
+		 * at this point won't interfere with the
+		 * pm_runtime framework, because the pm_runtime
+		 * state is guaranteed active here.
+		 */
+		/* Put chip into sleep mode */
+		pca9685_set_sleep_mode(pca, true);
+
+		/* Change the chip-wide output frequency */
+		pca9685_write_reg(pca, PCA9685_PRESCALE, prescale);
+
+		/* Wake the chip up */
+		pca9685_set_sleep_mode(pca, false);
+	}
+
+	duty = PCA9685_COUNTER_RANGE * state->duty_cycle;
+	duty = DIV_ROUND_UP_ULL(duty, state->period);
+	pca9685_pwm_set_duty(pca, pwm->hwpwm, duty);
+	return 0;
+}
+
+static int pca9685_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			     const struct pwm_state *state)
+{
+	struct pca9685 *pca = to_pca(chip);
+	int ret;
+
+	mutex_lock(&pca->lock);
+	ret = __pca9685_pwm_apply(chip, pwm, state);
+	if (ret == 0) {
+		if (state->enabled)
+			set_bit(pwm->hwpwm, pca->pwms_enabled);
+		else
+			clear_bit(pwm->hwpwm, pca->pwms_enabled);
+	}
+	mutex_unlock(&pca->lock);
+
+	return ret;
+}
+
+static int pca9685_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+				 struct pwm_state *state)
+{
+	struct pca9685 *pca = to_pca(chip);
+	unsigned long long duty;
+	unsigned int val = 0;
+
+	/* Calculate (chip-wide) period from prescale value */
+	pca9685_read_reg(pca, PCA9685_PRESCALE, &val);
+	/*
+	 * PCA9685_OSC_CLOCK_MHZ is 25, i.e. an integer divider of 1000.
+	 * The following calculation is therefore only a multiplication
+	 * and we are not losing precision.
+	 */
+	state->period = (PCA9685_COUNTER_RANGE * 1000 / PCA9685_OSC_CLOCK_MHZ) *
+			(val + 1);
+
+	/* The (per-channel) polarity is fixed */
+	state->polarity = PWM_POLARITY_NORMAL;
+
+	if (pwm->hwpwm >= PCA9685_MAXCHAN) {
+		/*
+		 * The "all LEDs" channel does not support HW readout
+		 * Return 0 and disabled for backwards compatibility
+		 */
+		state->duty_cycle = 0;
+		state->enabled = false;
+		return 0;
+	}
+
+	state->enabled = true;
+	duty = pca9685_pwm_get_duty(pca, pwm->hwpwm);
+	state->duty_cycle = DIV_ROUND_DOWN_ULL(duty * state->period, PCA9685_COUNTER_RANGE);
+
+	return 0;
+}
+
+static int pca9685_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct pca9685 *pca = to_pca(chip);
+
+	if (pca9685_pwm_test_and_set_inuse(pca, pwm->hwpwm))
+		return -EBUSY;
+
+	if (pwm->hwpwm < PCA9685_MAXCHAN) {
+		/* PWMs - except the "all LEDs" channel - default to enabled */
+		mutex_lock(&pca->lock);
+		set_bit(pwm->hwpwm, pca->pwms_enabled);
+		mutex_unlock(&pca->lock);
+	}
+
+	pm_runtime_get_sync(chip->dev);
+
+	return 0;
+}
+
+static void pca9685_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct pca9685 *pca = to_pca(chip);
+
+	mutex_lock(&pca->lock);
+	pca9685_pwm_set_duty(pca, pwm->hwpwm, 0);
+	clear_bit(pwm->hwpwm, pca->pwms_enabled);
+	mutex_unlock(&pca->lock);
+
+	pm_runtime_put(chip->dev);
+	pca9685_pwm_clear_inuse(pca, pwm->hwpwm);
+}
+
+static const struct pwm_ops pca9685_pwm_ops = {
+	.apply = pca9685_pwm_apply,
+	.get_state = pca9685_pwm_get_state,
+	.request = pca9685_pwm_request,
+	.free = pca9685_pwm_free,
+	.owner = THIS_MODULE,
+};
+
+static const struct regmap_config pca9685_regmap_i2c_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = PCA9685_NUMREGS,
+	.cache_type = REGCACHE_NONE,
+};
+
+static int pca9685_pwm_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct pca9685 *pca;
+	unsigned int reg;
+	int ret;
+
+	pca = devm_kzalloc(&client->dev, sizeof(*pca), GFP_KERNEL);
+	if (!pca)
+		return -ENOMEM;
+
+	pca->regmap = devm_regmap_init_i2c(client, &pca9685_regmap_i2c_config);
+	if (IS_ERR(pca->regmap)) {
+		ret = PTR_ERR(pca->regmap);
+		dev_err(&client->dev, "Failed to initialize register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	i2c_set_clientdata(client, pca);
+
+	mutex_init(&pca->lock);
+
+	ret = pca9685_read_reg(pca, PCA9685_MODE2, &reg);
+	if (ret)
+		return ret;
+
+	if (device_property_read_bool(&client->dev, "invert"))
+		reg |= MODE2_INVRT;
+	else
+		reg &= ~MODE2_INVRT;
+
+	if (device_property_read_bool(&client->dev, "open-drain"))
+		reg &= ~MODE2_OUTDRV;
+	else
+		reg |= MODE2_OUTDRV;
+
+	ret = pca9685_write_reg(pca, PCA9685_MODE2, reg);
+	if (ret)
+		return ret;
+
+	/* Disable all LED ALLCALL and SUBx addresses to avoid bus collisions */
+	pca9685_read_reg(pca, PCA9685_MODE1, &reg);
+	reg &= ~(MODE1_ALLCALL | MODE1_SUB1 | MODE1_SUB2 | MODE1_SUB3);
+	pca9685_write_reg(pca, PCA9685_MODE1, reg);
+
+	/* Reset OFF/ON registers to POR default */
+	pca9685_write_reg(pca, PCA9685_ALL_LED_OFF_L, 0);
+	pca9685_write_reg(pca, PCA9685_ALL_LED_OFF_H, LED_FULL);
+	pca9685_write_reg(pca, PCA9685_ALL_LED_ON_L, 0);
+	pca9685_write_reg(pca, PCA9685_ALL_LED_ON_H, LED_FULL);
+
+	pca->chip.ops = &pca9685_pwm_ops;
+	/* Add an extra channel for ALL_LED */
+	pca->chip.npwm = PCA9685_MAXCHAN + 1;
+
+	pca->chip.dev = &client->dev;
+
+	ret = pwmchip_add(&pca->chip);
+	if (ret < 0)
+		return ret;
+
+	ret = pca9685_pwm_gpio_probe(pca);
+	if (ret < 0) {
+		pwmchip_remove(&pca->chip);
+		return ret;
+	}
+
+	pm_runtime_enable(&client->dev);
+
+	if (pm_runtime_enabled(&client->dev)) {
+		/*
+		 * Although the chip comes out of power-up in the sleep state,
+		 * we force it to sleep in case it was woken up before
+		 */
+		pca9685_set_sleep_mode(pca, true);
+		pm_runtime_set_suspended(&client->dev);
+	} else {
+		/* Wake the chip up if runtime PM is disabled */
+		pca9685_set_sleep_mode(pca, false);
+	}
+
+	return 0;
+}
+
+static void pca9685_pwm_remove(struct i2c_client *client)
+{
+	struct pca9685 *pca = i2c_get_clientdata(client);
+
+	pwmchip_remove(&pca->chip);
+
+	if (!pm_runtime_enabled(&client->dev)) {
+		/* Put chip in sleep state if runtime PM is disabled */
+		pca9685_set_sleep_mode(pca, true);
+	}
+
+	pm_runtime_disable(&client->dev);
+}
+
+static int __maybe_unused pca9685_pwm_runtime_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct pca9685 *pca = i2c_get_clientdata(client);
+
+	pca9685_set_sleep_mode(pca, true);
+	return 0;
+}
+
+static int __maybe_unused pca9685_pwm_runtime_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct pca9685 *pca = i2c_get_clientdata(client);
+
+	pca9685_set_sleep_mode(pca, false);
+	return 0;
+}
+
+static const struct i2c_device_id pca9685_id[] = {
+	{ "pca9685", 0 },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(i2c, pca9685_id);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id pca9685_acpi_ids[] = {
+	{ "INT3492", 0 },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(acpi, pca9685_acpi_ids);
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id pca9685_dt_ids[] = {
+	{ .compatible = "nxp,pca9685-pwm", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pca9685_dt_ids);
+#endif
+
+static const struct dev_pm_ops pca9685_pwm_pm = {
+	SET_RUNTIME_PM_OPS(pca9685_pwm_runtime_suspend,
+			   pca9685_pwm_runtime_resume, NULL)
+};
+
+static struct i2c_driver pca9685_i2c_driver = {
+	.driver = {
+		.name = "pca9685-pwm",
+		.acpi_match_table = ACPI_PTR(pca9685_acpi_ids),
+		.of_match_table = of_match_ptr(pca9685_dt_ids),
+		.pm = &pca9685_pwm_pm,
+	},
+	.probe = pca9685_pwm_probe,
+	.remove = pca9685_pwm_remove,
+	.id_table = pca9685_id,
+};
+
+module_i2c_driver(pca9685_i2c_driver);
+
+MODULE_AUTHOR("Steffen Trumtrar <s.trumtrar@pengutronix.de>");
+MODULE_DESCRIPTION("PWM driver for PCA9685");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-pxa.c b/drivers/pwm/pwm-pxa.c
new file mode 100644
index 000000000..0bcaa58c6
--- /dev/null
+++ b/drivers/pwm/pwm-pxa.c
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * drivers/pwm/pwm-pxa.c
+ *
+ * simple driver for PWM (Pulse Width Modulator) controller
+ *
+ * 2008-02-13	initial version
+ *		eric miao <eric.miao@marvell.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+#include <linux/of_device.h>
+
+#include <asm/div64.h>
+
+#define HAS_SECONDARY_PWM	0x10
+
+static const struct platform_device_id pwm_id_table[] = {
+	/*   PWM    has_secondary_pwm? */
+	{ "pxa25x-pwm", 0 },
+	{ "pxa27x-pwm", HAS_SECONDARY_PWM },
+	{ "pxa168-pwm", 0 },
+	{ "pxa910-pwm", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, pwm_id_table);
+
+/* PWM registers and bits definitions */
+#define PWMCR		(0x00)
+#define PWMDCR		(0x04)
+#define PWMPCR		(0x08)
+
+#define PWMCR_SD	(1 << 6)
+#define PWMDCR_FD	(1 << 10)
+
+struct pxa_pwm_chip {
+	struct pwm_chip	chip;
+	struct device	*dev;
+
+	struct clk	*clk;
+	void __iomem	*mmio_base;
+};
+
+static inline struct pxa_pwm_chip *to_pxa_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct pxa_pwm_chip, chip);
+}
+
+/*
+ * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
+ * duty_ns   = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+ */
+static int pxa_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			  u64 duty_ns, u64 period_ns)
+{
+	struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip);
+	unsigned long long c;
+	unsigned long period_cycles, prescale, pv, dc;
+	unsigned long offset;
+	int rc;
+
+	offset = pwm->hwpwm ? 0x10 : 0;
+
+	c = clk_get_rate(pc->clk);
+	c = c * period_ns;
+	do_div(c, 1000000000);
+	period_cycles = c;
+
+	if (period_cycles < 1)
+		period_cycles = 1;
+	prescale = (period_cycles - 1) / 1024;
+	pv = period_cycles / (prescale + 1) - 1;
+
+	if (prescale > 63)
+		return -EINVAL;
+
+	if (duty_ns == period_ns)
+		dc = PWMDCR_FD;
+	else
+		dc = mul_u64_u64_div_u64(pv + 1, duty_ns, period_ns);
+
+	/* NOTE: the clock to PWM has to be enabled first
+	 * before writing to the registers
+	 */
+	rc = clk_prepare_enable(pc->clk);
+	if (rc < 0)
+		return rc;
+
+	writel(prescale, pc->mmio_base + offset + PWMCR);
+	writel(dc, pc->mmio_base + offset + PWMDCR);
+	writel(pv, pc->mmio_base + offset + PWMPCR);
+
+	clk_disable_unprepare(pc->clk);
+	return 0;
+}
+
+static int pxa_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip);
+
+	return clk_prepare_enable(pc->clk);
+}
+
+static void pxa_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip);
+
+	clk_disable_unprepare(pc->clk);
+}
+
+static int pxa_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			 const struct pwm_state *state)
+{
+	int err;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		if (pwm->state.enabled)
+			pxa_pwm_disable(chip, pwm);
+
+		return 0;
+	}
+
+	err = pxa_pwm_config(chip, pwm, state->duty_cycle, state->period);
+	if (err)
+		return err;
+
+	if (!pwm->state.enabled)
+		return pxa_pwm_enable(chip, pwm);
+
+	return 0;
+}
+
+static const struct pwm_ops pxa_pwm_ops = {
+	.apply = pxa_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+#ifdef CONFIG_OF
+/*
+ * Device tree users must create one device instance for each PWM channel.
+ * Hence we dispense with the HAS_SECONDARY_PWM and "tell" the original driver
+ * code that this is a single channel pxa25x-pwm.  Currently all devices are
+ * supported identically.
+ */
+static const struct of_device_id pwm_of_match[] = {
+	{ .compatible = "marvell,pxa250-pwm", .data = &pwm_id_table[0]},
+	{ .compatible = "marvell,pxa270-pwm", .data = &pwm_id_table[0]},
+	{ .compatible = "marvell,pxa168-pwm", .data = &pwm_id_table[0]},
+	{ .compatible = "marvell,pxa910-pwm", .data = &pwm_id_table[0]},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pwm_of_match);
+#else
+#define pwm_of_match NULL
+#endif
+
+static const struct platform_device_id *pxa_pwm_get_id_dt(struct device *dev)
+{
+	const struct of_device_id *id = of_match_device(pwm_of_match, dev);
+
+	return id ? id->data : NULL;
+}
+
+static int pwm_probe(struct platform_device *pdev)
+{
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	struct pxa_pwm_chip *pc;
+	int ret = 0;
+
+	if (IS_ENABLED(CONFIG_OF) && id == NULL)
+		id = pxa_pwm_get_id_dt(&pdev->dev);
+
+	if (id == NULL)
+		return -EINVAL;
+
+	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
+	if (pc == NULL)
+		return -ENOMEM;
+
+	pc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pc->clk))
+		return PTR_ERR(pc->clk);
+
+	pc->chip.dev = &pdev->dev;
+	pc->chip.ops = &pxa_pwm_ops;
+	pc->chip.npwm = (id->driver_data & HAS_SECONDARY_PWM) ? 2 : 1;
+
+	if (IS_ENABLED(CONFIG_OF)) {
+		pc->chip.of_xlate = of_pwm_single_xlate;
+		pc->chip.of_pwm_n_cells = 1;
+	}
+
+	pc->mmio_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(pc->mmio_base))
+		return PTR_ERR(pc->mmio_base);
+
+	ret = devm_pwmchip_add(&pdev->dev, &pc->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct platform_driver pwm_driver = {
+	.driver		= {
+		.name	= "pxa25x-pwm",
+		.of_match_table = pwm_of_match,
+	},
+	.probe		= pwm_probe,
+	.id_table	= pwm_id_table,
+};
+
+module_platform_driver(pwm_driver);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-raspberrypi-poe.c b/drivers/pwm/pwm-raspberrypi-poe.c
new file mode 100644
index 000000000..2939b71a7
--- /dev/null
+++ b/drivers/pwm/pwm-raspberrypi-poe.c
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021 Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+ * For more information on Raspberry Pi's PoE hat see:
+ * https://www.raspberrypi.org/products/poe-hat/
+ *
+ * Limitations:
+ *  - No disable bit, so a disabled PWM is simulated by duty_cycle 0
+ *  - Only normal polarity
+ *  - Fixed 12.5 kHz period
+ *
+ * The current period is completed when HW is reconfigured.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+#include <soc/bcm2835/raspberrypi-firmware.h>
+#include <dt-bindings/pwm/raspberrypi,firmware-poe-pwm.h>
+
+#define RPI_PWM_MAX_DUTY		255
+#define RPI_PWM_PERIOD_NS		80000 /* 12.5 kHz */
+
+#define RPI_PWM_CUR_DUTY_REG		0x0
+
+struct raspberrypi_pwm {
+	struct rpi_firmware *firmware;
+	struct pwm_chip chip;
+	unsigned int duty_cycle;
+};
+
+struct raspberrypi_pwm_prop {
+	__le32 reg;
+	__le32 val;
+	__le32 ret;
+} __packed;
+
+static inline
+struct raspberrypi_pwm *raspberrypi_pwm_from_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct raspberrypi_pwm, chip);
+}
+
+static int raspberrypi_pwm_set_property(struct rpi_firmware *firmware,
+					u32 reg, u32 val)
+{
+	struct raspberrypi_pwm_prop msg = {
+		.reg = cpu_to_le32(reg),
+		.val = cpu_to_le32(val),
+	};
+	int ret;
+
+	ret = rpi_firmware_property(firmware, RPI_FIRMWARE_SET_POE_HAT_VAL,
+				    &msg, sizeof(msg));
+	if (ret)
+		return ret;
+	if (msg.ret)
+		return -EIO;
+
+	return 0;
+}
+
+static int raspberrypi_pwm_get_property(struct rpi_firmware *firmware,
+					u32 reg, u32 *val)
+{
+	struct raspberrypi_pwm_prop msg = {
+		.reg = cpu_to_le32(reg),
+	};
+	int ret;
+
+	ret = rpi_firmware_property(firmware, RPI_FIRMWARE_GET_POE_HAT_VAL,
+				    &msg, sizeof(msg));
+	if (ret)
+		return ret;
+	if (msg.ret)
+		return -EIO;
+
+	*val = le32_to_cpu(msg.val);
+
+	return 0;
+}
+
+static int raspberrypi_pwm_get_state(struct pwm_chip *chip,
+				     struct pwm_device *pwm,
+				     struct pwm_state *state)
+{
+	struct raspberrypi_pwm *rpipwm = raspberrypi_pwm_from_chip(chip);
+
+	state->period = RPI_PWM_PERIOD_NS;
+	state->duty_cycle = DIV_ROUND_UP(rpipwm->duty_cycle * RPI_PWM_PERIOD_NS,
+					 RPI_PWM_MAX_DUTY);
+	state->enabled = !!(rpipwm->duty_cycle);
+	state->polarity = PWM_POLARITY_NORMAL;
+
+	return 0;
+}
+
+static int raspberrypi_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+				 const struct pwm_state *state)
+{
+	struct raspberrypi_pwm *rpipwm = raspberrypi_pwm_from_chip(chip);
+	unsigned int duty_cycle;
+	int ret;
+
+	if (state->period < RPI_PWM_PERIOD_NS ||
+	    state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled)
+		duty_cycle = 0;
+	else if (state->duty_cycle < RPI_PWM_PERIOD_NS)
+		duty_cycle = DIV_ROUND_DOWN_ULL(state->duty_cycle * RPI_PWM_MAX_DUTY,
+						RPI_PWM_PERIOD_NS);
+	else
+		duty_cycle = RPI_PWM_MAX_DUTY;
+
+	if (duty_cycle == rpipwm->duty_cycle)
+		return 0;
+
+	ret = raspberrypi_pwm_set_property(rpipwm->firmware, RPI_PWM_CUR_DUTY_REG,
+					   duty_cycle);
+	if (ret) {
+		dev_err(chip->dev, "Failed to set duty cycle: %pe\n",
+			ERR_PTR(ret));
+		return ret;
+	}
+
+	rpipwm->duty_cycle = duty_cycle;
+
+	return 0;
+}
+
+static const struct pwm_ops raspberrypi_pwm_ops = {
+	.get_state = raspberrypi_pwm_get_state,
+	.apply = raspberrypi_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static int raspberrypi_pwm_probe(struct platform_device *pdev)
+{
+	struct device_node *firmware_node;
+	struct device *dev = &pdev->dev;
+	struct rpi_firmware *firmware;
+	struct raspberrypi_pwm *rpipwm;
+	int ret;
+
+	firmware_node = of_get_parent(dev->of_node);
+	if (!firmware_node) {
+		dev_err(dev, "Missing firmware node\n");
+		return -ENOENT;
+	}
+
+	firmware = devm_rpi_firmware_get(&pdev->dev, firmware_node);
+	of_node_put(firmware_node);
+	if (!firmware)
+		return dev_err_probe(dev, -EPROBE_DEFER,
+				     "Failed to get firmware handle\n");
+
+	rpipwm = devm_kzalloc(&pdev->dev, sizeof(*rpipwm), GFP_KERNEL);
+	if (!rpipwm)
+		return -ENOMEM;
+
+	rpipwm->firmware = firmware;
+	rpipwm->chip.dev = dev;
+	rpipwm->chip.ops = &raspberrypi_pwm_ops;
+	rpipwm->chip.npwm = RASPBERRYPI_FIRMWARE_PWM_NUM;
+
+	ret = raspberrypi_pwm_get_property(rpipwm->firmware, RPI_PWM_CUR_DUTY_REG,
+					   &rpipwm->duty_cycle);
+	if (ret) {
+		dev_err(dev, "Failed to get duty cycle: %pe\n", ERR_PTR(ret));
+		return ret;
+	}
+
+	return devm_pwmchip_add(dev, &rpipwm->chip);
+}
+
+static const struct of_device_id raspberrypi_pwm_of_match[] = {
+	{ .compatible = "raspberrypi,firmware-poe-pwm", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, raspberrypi_pwm_of_match);
+
+static struct platform_driver raspberrypi_pwm_driver = {
+	.driver = {
+		.name = "raspberrypi-poe-pwm",
+		.of_match_table = raspberrypi_pwm_of_match,
+	},
+	.probe = raspberrypi_pwm_probe,
+};
+module_platform_driver(raspberrypi_pwm_driver);
+
+MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de>");
+MODULE_DESCRIPTION("Raspberry Pi Firmware Based PWM Bus Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-rcar.c b/drivers/pwm/pwm-rcar.c
new file mode 100644
index 000000000..55f46d096
--- /dev/null
+++ b/drivers/pwm/pwm-rcar.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * R-Car PWM Timer driver
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ *
+ * Limitations:
+ * - The hardware cannot generate a 0% duty cycle.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+#define RCAR_PWM_MAX_DIVISION	24
+#define RCAR_PWM_MAX_CYCLE	1023
+
+#define RCAR_PWMCR		0x00
+#define  RCAR_PWMCR_CC0_MASK	0x000f0000
+#define  RCAR_PWMCR_CC0_SHIFT	16
+#define  RCAR_PWMCR_CCMD	BIT(15)
+#define  RCAR_PWMCR_SYNC	BIT(11)
+#define  RCAR_PWMCR_SS0		BIT(4)
+#define  RCAR_PWMCR_EN0		BIT(0)
+
+#define RCAR_PWMCNT		0x04
+#define  RCAR_PWMCNT_CYC0_MASK	0x03ff0000
+#define  RCAR_PWMCNT_CYC0_SHIFT	16
+#define  RCAR_PWMCNT_PH0_MASK	0x000003ff
+#define  RCAR_PWMCNT_PH0_SHIFT	0
+
+struct rcar_pwm_chip {
+	struct pwm_chip chip;
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static inline struct rcar_pwm_chip *to_rcar_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct rcar_pwm_chip, chip);
+}
+
+static void rcar_pwm_write(struct rcar_pwm_chip *rp, u32 data,
+			   unsigned int offset)
+{
+	writel(data, rp->base + offset);
+}
+
+static u32 rcar_pwm_read(struct rcar_pwm_chip *rp, unsigned int offset)
+{
+	return readl(rp->base + offset);
+}
+
+static void rcar_pwm_update(struct rcar_pwm_chip *rp, u32 mask, u32 data,
+			    unsigned int offset)
+{
+	u32 value;
+
+	value = rcar_pwm_read(rp, offset);
+	value &= ~mask;
+	value |= data & mask;
+	rcar_pwm_write(rp, value, offset);
+}
+
+static int rcar_pwm_get_clock_division(struct rcar_pwm_chip *rp, int period_ns)
+{
+	unsigned long clk_rate = clk_get_rate(rp->clk);
+	u64 div, tmp;
+
+	if (clk_rate == 0)
+		return -EINVAL;
+
+	div = (u64)NSEC_PER_SEC * RCAR_PWM_MAX_CYCLE;
+	tmp = (u64)period_ns * clk_rate + div - 1;
+	tmp = div64_u64(tmp, div);
+	div = ilog2(tmp - 1) + 1;
+
+	return (div <= RCAR_PWM_MAX_DIVISION) ? div : -ERANGE;
+}
+
+static void rcar_pwm_set_clock_control(struct rcar_pwm_chip *rp,
+				       unsigned int div)
+{
+	u32 value;
+
+	value = rcar_pwm_read(rp, RCAR_PWMCR);
+	value &= ~(RCAR_PWMCR_CCMD | RCAR_PWMCR_CC0_MASK);
+
+	if (div & 1)
+		value |= RCAR_PWMCR_CCMD;
+
+	div >>= 1;
+
+	value |= div << RCAR_PWMCR_CC0_SHIFT;
+	rcar_pwm_write(rp, value, RCAR_PWMCR);
+}
+
+static int rcar_pwm_set_counter(struct rcar_pwm_chip *rp, int div, int duty_ns,
+				int period_ns)
+{
+	unsigned long long one_cycle, tmp;	/* 0.01 nanoseconds */
+	unsigned long clk_rate = clk_get_rate(rp->clk);
+	u32 cyc, ph;
+
+	one_cycle = NSEC_PER_SEC * 100ULL << div;
+	do_div(one_cycle, clk_rate);
+
+	tmp = period_ns * 100ULL;
+	do_div(tmp, one_cycle);
+	cyc = (tmp << RCAR_PWMCNT_CYC0_SHIFT) & RCAR_PWMCNT_CYC0_MASK;
+
+	tmp = duty_ns * 100ULL;
+	do_div(tmp, one_cycle);
+	ph = tmp & RCAR_PWMCNT_PH0_MASK;
+
+	/* Avoid prohibited setting */
+	if (cyc == 0 || ph == 0)
+		return -EINVAL;
+
+	rcar_pwm_write(rp, cyc | ph, RCAR_PWMCNT);
+
+	return 0;
+}
+
+static int rcar_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	return pm_runtime_get_sync(chip->dev);
+}
+
+static void rcar_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	pm_runtime_put(chip->dev);
+}
+
+static int rcar_pwm_enable(struct rcar_pwm_chip *rp)
+{
+	u32 value;
+
+	/* Don't enable the PWM device if CYC0 or PH0 is 0 */
+	value = rcar_pwm_read(rp, RCAR_PWMCNT);
+	if ((value & RCAR_PWMCNT_CYC0_MASK) == 0 ||
+	    (value & RCAR_PWMCNT_PH0_MASK) == 0)
+		return -EINVAL;
+
+	rcar_pwm_update(rp, RCAR_PWMCR_EN0, RCAR_PWMCR_EN0, RCAR_PWMCR);
+
+	return 0;
+}
+
+static void rcar_pwm_disable(struct rcar_pwm_chip *rp)
+{
+	rcar_pwm_update(rp, RCAR_PWMCR_EN0, 0, RCAR_PWMCR);
+}
+
+static int rcar_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			  const struct pwm_state *state)
+{
+	struct rcar_pwm_chip *rp = to_rcar_pwm_chip(chip);
+	int div, ret;
+
+	/* This HW/driver only supports normal polarity */
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		rcar_pwm_disable(rp);
+		return 0;
+	}
+
+	div = rcar_pwm_get_clock_division(rp, state->period);
+	if (div < 0)
+		return div;
+
+	rcar_pwm_update(rp, RCAR_PWMCR_SYNC, RCAR_PWMCR_SYNC, RCAR_PWMCR);
+
+	ret = rcar_pwm_set_counter(rp, div, state->duty_cycle, state->period);
+	if (!ret)
+		rcar_pwm_set_clock_control(rp, div);
+
+	/* The SYNC should be set to 0 even if rcar_pwm_set_counter failed */
+	rcar_pwm_update(rp, RCAR_PWMCR_SYNC, 0, RCAR_PWMCR);
+
+	if (!ret)
+		ret = rcar_pwm_enable(rp);
+
+	return ret;
+}
+
+static const struct pwm_ops rcar_pwm_ops = {
+	.request = rcar_pwm_request,
+	.free = rcar_pwm_free,
+	.apply = rcar_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static int rcar_pwm_probe(struct platform_device *pdev)
+{
+	struct rcar_pwm_chip *rcar_pwm;
+	int ret;
+
+	rcar_pwm = devm_kzalloc(&pdev->dev, sizeof(*rcar_pwm), GFP_KERNEL);
+	if (rcar_pwm == NULL)
+		return -ENOMEM;
+
+	rcar_pwm->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(rcar_pwm->base))
+		return PTR_ERR(rcar_pwm->base);
+
+	rcar_pwm->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(rcar_pwm->clk)) {
+		dev_err(&pdev->dev, "cannot get clock\n");
+		return PTR_ERR(rcar_pwm->clk);
+	}
+
+	platform_set_drvdata(pdev, rcar_pwm);
+
+	rcar_pwm->chip.dev = &pdev->dev;
+	rcar_pwm->chip.ops = &rcar_pwm_ops;
+	rcar_pwm->chip.npwm = 1;
+
+	pm_runtime_enable(&pdev->dev);
+
+	ret = pwmchip_add(&rcar_pwm->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to register PWM chip: %d\n", ret);
+		pm_runtime_disable(&pdev->dev);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rcar_pwm_remove(struct platform_device *pdev)
+{
+	struct rcar_pwm_chip *rcar_pwm = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&rcar_pwm->chip);
+
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static const struct of_device_id rcar_pwm_of_table[] = {
+	{ .compatible = "renesas,pwm-rcar", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rcar_pwm_of_table);
+
+static struct platform_driver rcar_pwm_driver = {
+	.probe = rcar_pwm_probe,
+	.remove = rcar_pwm_remove,
+	.driver = {
+		.name = "pwm-rcar",
+		.of_match_table = of_match_ptr(rcar_pwm_of_table),
+	}
+};
+module_platform_driver(rcar_pwm_driver);
+
+MODULE_AUTHOR("Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>");
+MODULE_DESCRIPTION("Renesas PWM Timer Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:pwm-rcar");
diff --git a/drivers/pwm/pwm-renesas-tpu.c b/drivers/pwm/pwm-renesas-tpu.c
new file mode 100644
index 000000000..d7311614c
--- /dev/null
+++ b/drivers/pwm/pwm-renesas-tpu.c
@@ -0,0 +1,505 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * R-Mobile TPU PWM driver
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define TPU_CHANNEL_MAX		4
+
+#define TPU_TSTR		0x00	/* Timer start register (shared) */
+
+#define TPU_TCRn		0x00	/* Timer control register */
+#define TPU_TCR_CCLR_NONE	(0 << 5)
+#define TPU_TCR_CCLR_TGRA	(1 << 5)
+#define TPU_TCR_CCLR_TGRB	(2 << 5)
+#define TPU_TCR_CCLR_TGRC	(5 << 5)
+#define TPU_TCR_CCLR_TGRD	(6 << 5)
+#define TPU_TCR_CKEG_RISING	(0 << 3)
+#define TPU_TCR_CKEG_FALLING	(1 << 3)
+#define TPU_TCR_CKEG_BOTH	(2 << 3)
+#define TPU_TMDRn		0x04	/* Timer mode register */
+#define TPU_TMDR_BFWT		(1 << 6)
+#define TPU_TMDR_BFB		(1 << 5)
+#define TPU_TMDR_BFA		(1 << 4)
+#define TPU_TMDR_MD_NORMAL	(0 << 0)
+#define TPU_TMDR_MD_PWM		(2 << 0)
+#define TPU_TIORn		0x08	/* Timer I/O control register */
+#define TPU_TIOR_IOA_0		(0 << 0)
+#define TPU_TIOR_IOA_0_CLR	(1 << 0)
+#define TPU_TIOR_IOA_0_SET	(2 << 0)
+#define TPU_TIOR_IOA_0_TOGGLE	(3 << 0)
+#define TPU_TIOR_IOA_1		(4 << 0)
+#define TPU_TIOR_IOA_1_CLR	(5 << 0)
+#define TPU_TIOR_IOA_1_SET	(6 << 0)
+#define TPU_TIOR_IOA_1_TOGGLE	(7 << 0)
+#define TPU_TIERn		0x0c	/* Timer interrupt enable register */
+#define TPU_TSRn		0x10	/* Timer status register */
+#define TPU_TCNTn		0x14	/* Timer counter */
+#define TPU_TGRAn		0x18	/* Timer general register A */
+#define TPU_TGRBn		0x1c	/* Timer general register B */
+#define TPU_TGRCn		0x20	/* Timer general register C */
+#define TPU_TGRDn		0x24	/* Timer general register D */
+
+#define TPU_CHANNEL_OFFSET	0x10
+#define TPU_CHANNEL_SIZE	0x40
+
+enum tpu_pin_state {
+	TPU_PIN_INACTIVE,		/* Pin is driven inactive */
+	TPU_PIN_PWM,			/* Pin is driven by PWM */
+	TPU_PIN_ACTIVE,			/* Pin is driven active */
+};
+
+struct tpu_device;
+
+struct tpu_pwm_device {
+	bool timer_on;			/* Whether the timer is running */
+
+	struct tpu_device *tpu;
+	unsigned int channel;		/* Channel number in the TPU */
+
+	enum pwm_polarity polarity;
+	unsigned int prescaler;
+	u16 period;
+	u16 duty;
+};
+
+struct tpu_device {
+	struct platform_device *pdev;
+	struct pwm_chip chip;
+	spinlock_t lock;
+
+	void __iomem *base;
+	struct clk *clk;
+};
+
+#define to_tpu_device(c)	container_of(c, struct tpu_device, chip)
+
+static void tpu_pwm_write(struct tpu_pwm_device *tpd, int reg_nr, u16 value)
+{
+	void __iomem *base = tpd->tpu->base + TPU_CHANNEL_OFFSET
+			   + tpd->channel * TPU_CHANNEL_SIZE;
+
+	iowrite16(value, base + reg_nr);
+}
+
+static void tpu_pwm_set_pin(struct tpu_pwm_device *tpd,
+			    enum tpu_pin_state state)
+{
+	static const char * const states[] = { "inactive", "PWM", "active" };
+
+	dev_dbg(&tpd->tpu->pdev->dev, "%u: configuring pin as %s\n",
+		tpd->channel, states[state]);
+
+	switch (state) {
+	case TPU_PIN_INACTIVE:
+		tpu_pwm_write(tpd, TPU_TIORn,
+			      tpd->polarity == PWM_POLARITY_INVERSED ?
+			      TPU_TIOR_IOA_1 : TPU_TIOR_IOA_0);
+		break;
+	case TPU_PIN_PWM:
+		tpu_pwm_write(tpd, TPU_TIORn,
+			      tpd->polarity == PWM_POLARITY_INVERSED ?
+			      TPU_TIOR_IOA_0_SET : TPU_TIOR_IOA_1_CLR);
+		break;
+	case TPU_PIN_ACTIVE:
+		tpu_pwm_write(tpd, TPU_TIORn,
+			      tpd->polarity == PWM_POLARITY_INVERSED ?
+			      TPU_TIOR_IOA_0 : TPU_TIOR_IOA_1);
+		break;
+	}
+}
+
+static void tpu_pwm_start_stop(struct tpu_pwm_device *tpd, int start)
+{
+	unsigned long flags;
+	u16 value;
+
+	spin_lock_irqsave(&tpd->tpu->lock, flags);
+	value = ioread16(tpd->tpu->base + TPU_TSTR);
+
+	if (start)
+		value |= 1 << tpd->channel;
+	else
+		value &= ~(1 << tpd->channel);
+
+	iowrite16(value, tpd->tpu->base + TPU_TSTR);
+	spin_unlock_irqrestore(&tpd->tpu->lock, flags);
+}
+
+static int tpu_pwm_timer_start(struct tpu_pwm_device *tpd)
+{
+	int ret;
+
+	if (!tpd->timer_on) {
+		/* Wake up device and enable clock. */
+		pm_runtime_get_sync(&tpd->tpu->pdev->dev);
+		ret = clk_prepare_enable(tpd->tpu->clk);
+		if (ret) {
+			dev_err(&tpd->tpu->pdev->dev, "cannot enable clock\n");
+			return ret;
+		}
+		tpd->timer_on = true;
+	}
+
+	/*
+	 * Make sure the channel is stopped, as we need to reconfigure it
+	 * completely. First drive the pin to the inactive state to avoid
+	 * glitches.
+	 */
+	tpu_pwm_set_pin(tpd, TPU_PIN_INACTIVE);
+	tpu_pwm_start_stop(tpd, false);
+
+	/*
+	 * - Clear TCNT on TGRB match
+	 * - Count on rising edge
+	 * - Set prescaler
+	 * - Output 0 until TGRA, output 1 until TGRB (active low polarity)
+	 * - Output 1 until TGRA, output 0 until TGRB (active high polarity
+	 * - PWM mode
+	 */
+	tpu_pwm_write(tpd, TPU_TCRn, TPU_TCR_CCLR_TGRB | TPU_TCR_CKEG_RISING |
+		      tpd->prescaler);
+	tpu_pwm_write(tpd, TPU_TMDRn, TPU_TMDR_MD_PWM);
+	tpu_pwm_set_pin(tpd, TPU_PIN_PWM);
+	tpu_pwm_write(tpd, TPU_TGRAn, tpd->duty);
+	tpu_pwm_write(tpd, TPU_TGRBn, tpd->period);
+
+	dev_dbg(&tpd->tpu->pdev->dev, "%u: TGRA 0x%04x TGRB 0x%04x\n",
+		tpd->channel, tpd->duty, tpd->period);
+
+	/* Start the channel. */
+	tpu_pwm_start_stop(tpd, true);
+
+	return 0;
+}
+
+static void tpu_pwm_timer_stop(struct tpu_pwm_device *tpd)
+{
+	if (!tpd->timer_on)
+		return;
+
+	/* Disable channel. */
+	tpu_pwm_start_stop(tpd, false);
+
+	/* Stop clock and mark device as idle. */
+	clk_disable_unprepare(tpd->tpu->clk);
+	pm_runtime_put(&tpd->tpu->pdev->dev);
+
+	tpd->timer_on = false;
+}
+
+/* -----------------------------------------------------------------------------
+ * PWM API
+ */
+
+static int tpu_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct tpu_device *tpu = to_tpu_device(chip);
+	struct tpu_pwm_device *tpd;
+
+	if (pwm->hwpwm >= TPU_CHANNEL_MAX)
+		return -EINVAL;
+
+	tpd = kzalloc(sizeof(*tpd), GFP_KERNEL);
+	if (tpd == NULL)
+		return -ENOMEM;
+
+	tpd->tpu = tpu;
+	tpd->channel = pwm->hwpwm;
+	tpd->polarity = PWM_POLARITY_NORMAL;
+	tpd->prescaler = 0;
+	tpd->period = 0;
+	tpd->duty = 0;
+
+	tpd->timer_on = false;
+
+	pwm_set_chip_data(pwm, tpd);
+
+	return 0;
+}
+
+static void tpu_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct tpu_pwm_device *tpd = pwm_get_chip_data(pwm);
+
+	tpu_pwm_timer_stop(tpd);
+	kfree(tpd);
+}
+
+static int tpu_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			  u64 duty_ns, u64 period_ns, bool enabled)
+{
+	struct tpu_pwm_device *tpd = pwm_get_chip_data(pwm);
+	struct tpu_device *tpu = to_tpu_device(chip);
+	unsigned int prescaler;
+	bool duty_only = false;
+	u32 clk_rate;
+	u64 period;
+	u32 duty;
+	int ret;
+
+	clk_rate = clk_get_rate(tpu->clk);
+	if (unlikely(clk_rate > NSEC_PER_SEC)) {
+		/*
+		 * This won't happen in the nearer future, so this is only a
+		 * safeguard to prevent the following calculation from
+		 * overflowing. With this clk_rate * period_ns / NSEC_PER_SEC is
+		 * not greater than period_ns and so fits into an u64.
+		 */
+		return -EINVAL;
+	}
+
+	period = mul_u64_u64_div_u64(clk_rate, period_ns, NSEC_PER_SEC);
+
+	/*
+	 * Find the minimal prescaler in [0..3] such that
+	 *
+	 *     period >> (2 * prescaler) < 0x10000
+	 *
+	 * This could be calculated using something like:
+	 *
+	 *     prescaler = max(ilog2(period) / 2, 7) - 7;
+	 *
+	 * but given there are only four allowed results and that ilog2 isn't
+	 * cheap on all platforms using a switch statement is more effective.
+	 */
+	switch (period) {
+	case 1 ... 0xffff:
+		prescaler = 0;
+		break;
+
+	case 0x10000 ... 0x3ffff:
+		prescaler = 1;
+		break;
+
+	case 0x40000 ... 0xfffff:
+		prescaler = 2;
+		break;
+
+	case 0x100000 ... 0x3fffff:
+		prescaler = 3;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	period >>= 2 * prescaler;
+
+	if (duty_ns)
+		duty = mul_u64_u64_div_u64(clk_rate, duty_ns,
+					   (u64)NSEC_PER_SEC << (2 * prescaler));
+	else
+		duty = 0;
+
+	dev_dbg(&tpu->pdev->dev,
+		"rate %u, prescaler %u, period %u, duty %u\n",
+		clk_rate, 1 << (2 * prescaler), (u32)period, duty);
+
+	if (tpd->prescaler == prescaler && tpd->period == period)
+		duty_only = true;
+
+	tpd->prescaler = prescaler;
+	tpd->period = period;
+	tpd->duty = duty;
+
+	/* If the channel is disabled we're done. */
+	if (!enabled)
+		return 0;
+
+	if (duty_only && tpd->timer_on) {
+		/*
+		 * If only the duty cycle changed and the timer is already
+		 * running, there's no need to reconfigure it completely, Just
+		 * modify the duty cycle.
+		 */
+		tpu_pwm_write(tpd, TPU_TGRAn, tpd->duty);
+		dev_dbg(&tpu->pdev->dev, "%u: TGRA 0x%04x\n", tpd->channel,
+			tpd->duty);
+	} else {
+		/* Otherwise perform a full reconfiguration. */
+		ret = tpu_pwm_timer_start(tpd);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (duty == 0 || duty == period) {
+		/*
+		 * To avoid running the timer when not strictly required, handle
+		 * 0% and 100% duty cycles as fixed levels and stop the timer.
+		 */
+		tpu_pwm_set_pin(tpd, duty ? TPU_PIN_ACTIVE : TPU_PIN_INACTIVE);
+		tpu_pwm_timer_stop(tpd);
+	}
+
+	return 0;
+}
+
+static int tpu_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
+				enum pwm_polarity polarity)
+{
+	struct tpu_pwm_device *tpd = pwm_get_chip_data(pwm);
+
+	tpd->polarity = polarity;
+
+	return 0;
+}
+
+static int tpu_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct tpu_pwm_device *tpd = pwm_get_chip_data(pwm);
+	int ret;
+
+	ret = tpu_pwm_timer_start(tpd);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * To avoid running the timer when not strictly required, handle 0% and
+	 * 100% duty cycles as fixed levels and stop the timer.
+	 */
+	if (tpd->duty == 0 || tpd->duty == tpd->period) {
+		tpu_pwm_set_pin(tpd, tpd->duty ?
+				TPU_PIN_ACTIVE : TPU_PIN_INACTIVE);
+		tpu_pwm_timer_stop(tpd);
+	}
+
+	return 0;
+}
+
+static void tpu_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct tpu_pwm_device *tpd = pwm_get_chip_data(pwm);
+
+	/* The timer must be running to modify the pin output configuration. */
+	tpu_pwm_timer_start(tpd);
+	tpu_pwm_set_pin(tpd, TPU_PIN_INACTIVE);
+	tpu_pwm_timer_stop(tpd);
+}
+
+static int tpu_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			 const struct pwm_state *state)
+{
+	int err;
+	bool enabled = pwm->state.enabled;
+
+	if (state->polarity != pwm->state.polarity) {
+		if (enabled) {
+			tpu_pwm_disable(chip, pwm);
+			enabled = false;
+		}
+
+		err = tpu_pwm_set_polarity(chip, pwm, state->polarity);
+		if (err)
+			return err;
+	}
+
+	if (!state->enabled) {
+		if (enabled)
+			tpu_pwm_disable(chip, pwm);
+
+		return 0;
+	}
+
+	err = tpu_pwm_config(pwm->chip, pwm,
+			     state->duty_cycle, state->period, enabled);
+	if (err)
+		return err;
+
+	if (!enabled)
+		err = tpu_pwm_enable(chip, pwm);
+
+	return err;
+}
+
+static const struct pwm_ops tpu_pwm_ops = {
+	.request = tpu_pwm_request,
+	.free = tpu_pwm_free,
+	.apply = tpu_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+/* -----------------------------------------------------------------------------
+ * Probe and remove
+ */
+
+static int tpu_probe(struct platform_device *pdev)
+{
+	struct tpu_device *tpu;
+	int ret;
+
+	tpu = devm_kzalloc(&pdev->dev, sizeof(*tpu), GFP_KERNEL);
+	if (tpu == NULL)
+		return -ENOMEM;
+
+	spin_lock_init(&tpu->lock);
+	tpu->pdev = pdev;
+
+	/* Map memory, get clock and pin control. */
+	tpu->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(tpu->base))
+		return PTR_ERR(tpu->base);
+
+	tpu->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(tpu->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(tpu->clk), "Failed to get clock\n");
+
+	/* Initialize and register the device. */
+	platform_set_drvdata(pdev, tpu);
+
+	tpu->chip.dev = &pdev->dev;
+	tpu->chip.ops = &tpu_pwm_ops;
+	tpu->chip.npwm = TPU_CHANNEL_MAX;
+
+	ret = devm_pm_runtime_enable(&pdev->dev);
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret, "Failed to enable runtime PM\n");
+
+	ret = devm_pwmchip_add(&pdev->dev, &tpu->chip);
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret, "Failed to register PWM chip\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id tpu_of_table[] = {
+	{ .compatible = "renesas,tpu-r8a73a4", },
+	{ .compatible = "renesas,tpu-r8a7740", },
+	{ .compatible = "renesas,tpu-r8a7790", },
+	{ .compatible = "renesas,tpu", },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, tpu_of_table);
+#endif
+
+static struct platform_driver tpu_driver = {
+	.probe		= tpu_probe,
+	.driver		= {
+		.name	= "renesas-tpu-pwm",
+		.of_match_table = of_match_ptr(tpu_of_table),
+	}
+};
+
+module_platform_driver(tpu_driver);
+
+MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
+MODULE_DESCRIPTION("Renesas TPU PWM Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:renesas-tpu-pwm");
diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
new file mode 100644
index 000000000..3ec7d1756
--- /dev/null
+++ b/drivers/pwm/pwm-rockchip.c
@@ -0,0 +1,403 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PWM driver for Rockchip SoCs
+ *
+ * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
+ * Copyright (C) 2014 ROCKCHIP, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/time.h>
+
+#define PWM_CTRL_TIMER_EN	(1 << 0)
+#define PWM_CTRL_OUTPUT_EN	(1 << 3)
+
+#define PWM_ENABLE		(1 << 0)
+#define PWM_CONTINUOUS		(1 << 1)
+#define PWM_DUTY_POSITIVE	(1 << 3)
+#define PWM_DUTY_NEGATIVE	(0 << 3)
+#define PWM_INACTIVE_NEGATIVE	(0 << 4)
+#define PWM_INACTIVE_POSITIVE	(1 << 4)
+#define PWM_POLARITY_MASK	(PWM_DUTY_POSITIVE | PWM_INACTIVE_POSITIVE)
+#define PWM_OUTPUT_LEFT		(0 << 5)
+#define PWM_LOCK_EN		(1 << 6)
+#define PWM_LP_DISABLE		(0 << 8)
+
+struct rockchip_pwm_chip {
+	struct pwm_chip chip;
+	struct clk *clk;
+	struct clk *pclk;
+	const struct rockchip_pwm_data *data;
+	void __iomem *base;
+};
+
+struct rockchip_pwm_regs {
+	unsigned long duty;
+	unsigned long period;
+	unsigned long cntr;
+	unsigned long ctrl;
+};
+
+struct rockchip_pwm_data {
+	struct rockchip_pwm_regs regs;
+	unsigned int prescaler;
+	bool supports_polarity;
+	bool supports_lock;
+	u32 enable_conf;
+};
+
+static inline struct rockchip_pwm_chip *to_rockchip_pwm_chip(struct pwm_chip *c)
+{
+	return container_of(c, struct rockchip_pwm_chip, chip);
+}
+
+static int rockchip_pwm_get_state(struct pwm_chip *chip,
+				  struct pwm_device *pwm,
+				  struct pwm_state *state)
+{
+	struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
+	u32 enable_conf = pc->data->enable_conf;
+	unsigned long clk_rate;
+	u64 tmp;
+	u32 val;
+	int ret;
+
+	ret = clk_enable(pc->pclk);
+	if (ret)
+		return 0;
+
+	ret = clk_enable(pc->clk);
+	if (ret)
+		return 0;
+
+	clk_rate = clk_get_rate(pc->clk);
+
+	tmp = readl_relaxed(pc->base + pc->data->regs.period);
+	tmp *= pc->data->prescaler * NSEC_PER_SEC;
+	state->period = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
+
+	tmp = readl_relaxed(pc->base + pc->data->regs.duty);
+	tmp *= pc->data->prescaler * NSEC_PER_SEC;
+	state->duty_cycle =  DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
+
+	val = readl_relaxed(pc->base + pc->data->regs.ctrl);
+	state->enabled = (val & enable_conf) == enable_conf;
+
+	if (pc->data->supports_polarity && !(val & PWM_DUTY_POSITIVE))
+		state->polarity = PWM_POLARITY_INVERSED;
+	else
+		state->polarity = PWM_POLARITY_NORMAL;
+
+	clk_disable(pc->clk);
+	clk_disable(pc->pclk);
+
+	return 0;
+}
+
+static void rockchip_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			       const struct pwm_state *state)
+{
+	struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
+	unsigned long period, duty;
+	u64 clk_rate, div;
+	u32 ctrl;
+
+	clk_rate = clk_get_rate(pc->clk);
+
+	/*
+	 * Since period and duty cycle registers have a width of 32
+	 * bits, every possible input period can be obtained using the
+	 * default prescaler value for all practical clock rate values.
+	 */
+	div = clk_rate * state->period;
+	period = DIV_ROUND_CLOSEST_ULL(div,
+				       pc->data->prescaler * NSEC_PER_SEC);
+
+	div = clk_rate * state->duty_cycle;
+	duty = DIV_ROUND_CLOSEST_ULL(div, pc->data->prescaler * NSEC_PER_SEC);
+
+	/*
+	 * Lock the period and duty of previous configuration, then
+	 * change the duty and period, that would not be effective.
+	 */
+	ctrl = readl_relaxed(pc->base + pc->data->regs.ctrl);
+	if (pc->data->supports_lock) {
+		ctrl |= PWM_LOCK_EN;
+		writel_relaxed(ctrl, pc->base + pc->data->regs.ctrl);
+	}
+
+	writel(period, pc->base + pc->data->regs.period);
+	writel(duty, pc->base + pc->data->regs.duty);
+
+	if (pc->data->supports_polarity) {
+		ctrl &= ~PWM_POLARITY_MASK;
+		if (state->polarity == PWM_POLARITY_INVERSED)
+			ctrl |= PWM_DUTY_NEGATIVE | PWM_INACTIVE_POSITIVE;
+		else
+			ctrl |= PWM_DUTY_POSITIVE | PWM_INACTIVE_NEGATIVE;
+	}
+
+	/*
+	 * Unlock and set polarity at the same time,
+	 * the configuration of duty, period and polarity
+	 * would be effective together at next period.
+	 */
+	if (pc->data->supports_lock)
+		ctrl &= ~PWM_LOCK_EN;
+
+	writel(ctrl, pc->base + pc->data->regs.ctrl);
+}
+
+static int rockchip_pwm_enable(struct pwm_chip *chip,
+			       struct pwm_device *pwm,
+			       bool enable)
+{
+	struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
+	u32 enable_conf = pc->data->enable_conf;
+	int ret;
+	u32 val;
+
+	if (enable) {
+		ret = clk_enable(pc->clk);
+		if (ret)
+			return ret;
+	}
+
+	val = readl_relaxed(pc->base + pc->data->regs.ctrl);
+
+	if (enable)
+		val |= enable_conf;
+	else
+		val &= ~enable_conf;
+
+	writel_relaxed(val, pc->base + pc->data->regs.ctrl);
+
+	if (!enable)
+		clk_disable(pc->clk);
+
+	return 0;
+}
+
+static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			      const struct pwm_state *state)
+{
+	struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
+	struct pwm_state curstate;
+	bool enabled;
+	int ret = 0;
+
+	ret = clk_enable(pc->pclk);
+	if (ret)
+		return ret;
+
+	ret = clk_enable(pc->clk);
+	if (ret)
+		return ret;
+
+	pwm_get_state(pwm, &curstate);
+	enabled = curstate.enabled;
+
+	if (state->polarity != curstate.polarity && enabled &&
+	    !pc->data->supports_lock) {
+		ret = rockchip_pwm_enable(chip, pwm, false);
+		if (ret)
+			goto out;
+		enabled = false;
+	}
+
+	rockchip_pwm_config(chip, pwm, state);
+	if (state->enabled != enabled) {
+		ret = rockchip_pwm_enable(chip, pwm, state->enabled);
+		if (ret)
+			goto out;
+	}
+
+out:
+	clk_disable(pc->clk);
+	clk_disable(pc->pclk);
+
+	return ret;
+}
+
+static const struct pwm_ops rockchip_pwm_ops = {
+	.get_state = rockchip_pwm_get_state,
+	.apply = rockchip_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static const struct rockchip_pwm_data pwm_data_v1 = {
+	.regs = {
+		.duty = 0x04,
+		.period = 0x08,
+		.cntr = 0x00,
+		.ctrl = 0x0c,
+	},
+	.prescaler = 2,
+	.supports_polarity = false,
+	.supports_lock = false,
+	.enable_conf = PWM_CTRL_OUTPUT_EN | PWM_CTRL_TIMER_EN,
+};
+
+static const struct rockchip_pwm_data pwm_data_v2 = {
+	.regs = {
+		.duty = 0x08,
+		.period = 0x04,
+		.cntr = 0x00,
+		.ctrl = 0x0c,
+	},
+	.prescaler = 1,
+	.supports_polarity = true,
+	.supports_lock = false,
+	.enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | PWM_ENABLE |
+		       PWM_CONTINUOUS,
+};
+
+static const struct rockchip_pwm_data pwm_data_vop = {
+	.regs = {
+		.duty = 0x08,
+		.period = 0x04,
+		.cntr = 0x0c,
+		.ctrl = 0x00,
+	},
+	.prescaler = 1,
+	.supports_polarity = true,
+	.supports_lock = false,
+	.enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | PWM_ENABLE |
+		       PWM_CONTINUOUS,
+};
+
+static const struct rockchip_pwm_data pwm_data_v3 = {
+	.regs = {
+		.duty = 0x08,
+		.period = 0x04,
+		.cntr = 0x00,
+		.ctrl = 0x0c,
+	},
+	.prescaler = 1,
+	.supports_polarity = true,
+	.supports_lock = true,
+	.enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | PWM_ENABLE |
+		       PWM_CONTINUOUS,
+};
+
+static const struct of_device_id rockchip_pwm_dt_ids[] = {
+	{ .compatible = "rockchip,rk2928-pwm", .data = &pwm_data_v1},
+	{ .compatible = "rockchip,rk3288-pwm", .data = &pwm_data_v2},
+	{ .compatible = "rockchip,vop-pwm", .data = &pwm_data_vop},
+	{ .compatible = "rockchip,rk3328-pwm", .data = &pwm_data_v3},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rockchip_pwm_dt_ids);
+
+static int rockchip_pwm_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *id;
+	struct rockchip_pwm_chip *pc;
+	u32 enable_conf, ctrl;
+	bool enabled;
+	int ret, count;
+
+	id = of_match_device(rockchip_pwm_dt_ids, &pdev->dev);
+	if (!id)
+		return -EINVAL;
+
+	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
+	if (!pc)
+		return -ENOMEM;
+
+	pc->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(pc->base))
+		return PTR_ERR(pc->base);
+
+	pc->clk = devm_clk_get(&pdev->dev, "pwm");
+	if (IS_ERR(pc->clk)) {
+		pc->clk = devm_clk_get(&pdev->dev, NULL);
+		if (IS_ERR(pc->clk))
+			return dev_err_probe(&pdev->dev, PTR_ERR(pc->clk),
+					     "Can't get PWM clk\n");
+	}
+
+	count = of_count_phandle_with_args(pdev->dev.of_node,
+					   "clocks", "#clock-cells");
+	if (count == 2)
+		pc->pclk = devm_clk_get(&pdev->dev, "pclk");
+	else
+		pc->pclk = pc->clk;
+
+	if (IS_ERR(pc->pclk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(pc->pclk), "Can't get APB clk\n");
+
+	ret = clk_prepare_enable(pc->clk);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "Can't prepare enable PWM clk\n");
+
+	ret = clk_prepare_enable(pc->pclk);
+	if (ret) {
+		dev_err_probe(&pdev->dev, ret, "Can't prepare enable APB clk\n");
+		goto err_clk;
+	}
+
+	platform_set_drvdata(pdev, pc);
+
+	pc->data = id->data;
+	pc->chip.dev = &pdev->dev;
+	pc->chip.ops = &rockchip_pwm_ops;
+	pc->chip.npwm = 1;
+
+	enable_conf = pc->data->enable_conf;
+	ctrl = readl_relaxed(pc->base + pc->data->regs.ctrl);
+	enabled = (ctrl & enable_conf) == enable_conf;
+
+	ret = pwmchip_add(&pc->chip);
+	if (ret < 0) {
+		dev_err_probe(&pdev->dev, ret, "pwmchip_add() failed\n");
+		goto err_pclk;
+	}
+
+	/* Keep the PWM clk enabled if the PWM appears to be up and running. */
+	if (!enabled)
+		clk_disable(pc->clk);
+
+	clk_disable(pc->pclk);
+
+	return 0;
+
+err_pclk:
+	clk_disable_unprepare(pc->pclk);
+err_clk:
+	clk_disable_unprepare(pc->clk);
+
+	return ret;
+}
+
+static int rockchip_pwm_remove(struct platform_device *pdev)
+{
+	struct rockchip_pwm_chip *pc = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&pc->chip);
+
+	clk_unprepare(pc->pclk);
+	clk_unprepare(pc->clk);
+
+	return 0;
+}
+
+static struct platform_driver rockchip_pwm_driver = {
+	.driver = {
+		.name = "rockchip-pwm",
+		.of_match_table = rockchip_pwm_dt_ids,
+	},
+	.probe = rockchip_pwm_probe,
+	.remove = rockchip_pwm_remove,
+};
+module_platform_driver(rockchip_pwm_driver);
+
+MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
+MODULE_DESCRIPTION("Rockchip SoC PWM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-samsung.c b/drivers/pwm/pwm-samsung.c
new file mode 100644
index 000000000..9c5b4f515
--- /dev/null
+++ b/drivers/pwm/pwm-samsung.c
@@ -0,0 +1,685 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2007 Ben Dooks
+ * Copyright (c) 2008 Simtec Electronics
+ *     Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ * Copyright (c) 2017 Samsung Electronics Co., Ltd.
+ *
+ * PWM driver for Samsung SoCs
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/export.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/time.h>
+
+/* For struct samsung_timer_variant and samsung_pwm_lock. */
+#include <clocksource/samsung_pwm.h>
+
+#define REG_TCFG0			0x00
+#define REG_TCFG1			0x04
+#define REG_TCON			0x08
+
+#define REG_TCNTB(chan)			(0x0c + ((chan) * 0xc))
+#define REG_TCMPB(chan)			(0x10 + ((chan) * 0xc))
+
+#define TCFG0_PRESCALER_MASK		0xff
+#define TCFG0_PRESCALER1_SHIFT		8
+
+#define TCFG1_MUX_MASK			0xf
+#define TCFG1_SHIFT(chan)		(4 * (chan))
+
+/*
+ * Each channel occupies 4 bits in TCON register, but there is a gap of 4
+ * bits (one channel) after channel 0, so channels have different numbering
+ * when accessing TCON register. See to_tcon_channel() function.
+ *
+ * In addition, the location of autoreload bit for channel 4 (TCON channel 5)
+ * in its set of bits is 2 as opposed to 3 for other channels.
+ */
+#define TCON_START(chan)		BIT(4 * (chan) + 0)
+#define TCON_MANUALUPDATE(chan)		BIT(4 * (chan) + 1)
+#define TCON_INVERT(chan)		BIT(4 * (chan) + 2)
+#define _TCON_AUTORELOAD(chan)		BIT(4 * (chan) + 3)
+#define _TCON_AUTORELOAD4(chan)		BIT(4 * (chan) + 2)
+#define TCON_AUTORELOAD(chan)		\
+	((chan < 5) ? _TCON_AUTORELOAD(chan) : _TCON_AUTORELOAD4(chan))
+
+/**
+ * struct samsung_pwm_channel - private data of PWM channel
+ * @period_ns:	current period in nanoseconds programmed to the hardware
+ * @duty_ns:	current duty time in nanoseconds programmed to the hardware
+ * @tin_ns:	time of one timer tick in nanoseconds with current timer rate
+ */
+struct samsung_pwm_channel {
+	u32 period_ns;
+	u32 duty_ns;
+	u32 tin_ns;
+};
+
+/**
+ * struct samsung_pwm_chip - private data of PWM chip
+ * @chip:		generic PWM chip
+ * @variant:		local copy of hardware variant data
+ * @inverter_mask:	inverter status for all channels - one bit per channel
+ * @disabled_mask:	disabled status for all channels - one bit per channel
+ * @base:		base address of mapped PWM registers
+ * @base_clk:		base clock used to drive the timers
+ * @tclk0:		external clock 0 (can be ERR_PTR if not present)
+ * @tclk1:		external clock 1 (can be ERR_PTR if not present)
+ */
+struct samsung_pwm_chip {
+	struct pwm_chip chip;
+	struct samsung_pwm_variant variant;
+	u8 inverter_mask;
+	u8 disabled_mask;
+
+	void __iomem *base;
+	struct clk *base_clk;
+	struct clk *tclk0;
+	struct clk *tclk1;
+};
+
+#ifndef CONFIG_CLKSRC_SAMSUNG_PWM
+/*
+ * PWM block is shared between pwm-samsung and samsung_pwm_timer drivers
+ * and some registers need access synchronization. If both drivers are
+ * compiled in, the spinlock is defined in the clocksource driver,
+ * otherwise following definition is used.
+ *
+ * Currently we do not need any more complex synchronization method
+ * because all the supported SoCs contain only one instance of the PWM
+ * IP. Should this change, both drivers will need to be modified to
+ * properly synchronize accesses to particular instances.
+ */
+static DEFINE_SPINLOCK(samsung_pwm_lock);
+#endif
+
+static inline
+struct samsung_pwm_chip *to_samsung_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct samsung_pwm_chip, chip);
+}
+
+static inline unsigned int to_tcon_channel(unsigned int channel)
+{
+	/* TCON register has a gap of 4 bits (1 channel) after channel 0 */
+	return (channel == 0) ? 0 : (channel + 1);
+}
+
+static void __pwm_samsung_manual_update(struct samsung_pwm_chip *chip,
+				      struct pwm_device *pwm)
+{
+	unsigned int tcon_chan = to_tcon_channel(pwm->hwpwm);
+	u32 tcon;
+
+	tcon = readl(chip->base + REG_TCON);
+	tcon |= TCON_MANUALUPDATE(tcon_chan);
+	writel(tcon, chip->base + REG_TCON);
+
+	tcon &= ~TCON_MANUALUPDATE(tcon_chan);
+	writel(tcon, chip->base + REG_TCON);
+}
+
+static void pwm_samsung_set_divisor(struct samsung_pwm_chip *pwm,
+				    unsigned int channel, u8 divisor)
+{
+	u8 shift = TCFG1_SHIFT(channel);
+	unsigned long flags;
+	u32 reg;
+	u8 bits;
+
+	bits = (fls(divisor) - 1) - pwm->variant.div_base;
+
+	spin_lock_irqsave(&samsung_pwm_lock, flags);
+
+	reg = readl(pwm->base + REG_TCFG1);
+	reg &= ~(TCFG1_MUX_MASK << shift);
+	reg |= bits << shift;
+	writel(reg, pwm->base + REG_TCFG1);
+
+	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
+}
+
+static int pwm_samsung_is_tdiv(struct samsung_pwm_chip *chip, unsigned int chan)
+{
+	struct samsung_pwm_variant *variant = &chip->variant;
+	u32 reg;
+
+	reg = readl(chip->base + REG_TCFG1);
+	reg >>= TCFG1_SHIFT(chan);
+	reg &= TCFG1_MUX_MASK;
+
+	return (BIT(reg) & variant->tclk_mask) == 0;
+}
+
+static unsigned long pwm_samsung_get_tin_rate(struct samsung_pwm_chip *chip,
+					      unsigned int chan)
+{
+	unsigned long rate;
+	u32 reg;
+
+	rate = clk_get_rate(chip->base_clk);
+
+	reg = readl(chip->base + REG_TCFG0);
+	if (chan >= 2)
+		reg >>= TCFG0_PRESCALER1_SHIFT;
+	reg &= TCFG0_PRESCALER_MASK;
+
+	return rate / (reg + 1);
+}
+
+static unsigned long pwm_samsung_calc_tin(struct samsung_pwm_chip *chip,
+					  unsigned int chan, unsigned long freq)
+{
+	struct samsung_pwm_variant *variant = &chip->variant;
+	unsigned long rate;
+	struct clk *clk;
+	u8 div;
+
+	if (!pwm_samsung_is_tdiv(chip, chan)) {
+		clk = (chan < 2) ? chip->tclk0 : chip->tclk1;
+		if (!IS_ERR(clk)) {
+			rate = clk_get_rate(clk);
+			if (rate)
+				return rate;
+		}
+
+		dev_warn(chip->chip.dev,
+			"tclk of PWM %d is inoperational, using tdiv\n", chan);
+	}
+
+	rate = pwm_samsung_get_tin_rate(chip, chan);
+	dev_dbg(chip->chip.dev, "tin parent at %lu\n", rate);
+
+	/*
+	 * Compare minimum PWM frequency that can be achieved with possible
+	 * divider settings and choose the lowest divisor that can generate
+	 * frequencies lower than requested.
+	 */
+	if (variant->bits < 32) {
+		/* Only for s3c24xx */
+		for (div = variant->div_base; div < 4; ++div)
+			if ((rate >> (variant->bits + div)) < freq)
+				break;
+	} else {
+		/*
+		 * Other variants have enough counter bits to generate any
+		 * requested rate, so no need to check higher divisors.
+		 */
+		div = variant->div_base;
+	}
+
+	pwm_samsung_set_divisor(chip, chan, BIT(div));
+
+	return rate >> div;
+}
+
+static int pwm_samsung_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
+	struct samsung_pwm_channel *our_chan;
+
+	if (!(our_chip->variant.output_mask & BIT(pwm->hwpwm))) {
+		dev_warn(chip->dev,
+			"tried to request PWM channel %d without output\n",
+			pwm->hwpwm);
+		return -EINVAL;
+	}
+
+	our_chan = kzalloc(sizeof(*our_chan), GFP_KERNEL);
+	if (!our_chan)
+		return -ENOMEM;
+
+	pwm_set_chip_data(pwm, our_chan);
+
+	return 0;
+}
+
+static void pwm_samsung_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	kfree(pwm_get_chip_data(pwm));
+}
+
+static int pwm_samsung_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
+	unsigned int tcon_chan = to_tcon_channel(pwm->hwpwm);
+	unsigned long flags;
+	u32 tcon;
+
+	spin_lock_irqsave(&samsung_pwm_lock, flags);
+
+	tcon = readl(our_chip->base + REG_TCON);
+
+	tcon &= ~TCON_START(tcon_chan);
+	tcon |= TCON_MANUALUPDATE(tcon_chan);
+	writel(tcon, our_chip->base + REG_TCON);
+
+	tcon &= ~TCON_MANUALUPDATE(tcon_chan);
+	tcon |= TCON_START(tcon_chan) | TCON_AUTORELOAD(tcon_chan);
+	writel(tcon, our_chip->base + REG_TCON);
+
+	our_chip->disabled_mask &= ~BIT(pwm->hwpwm);
+
+	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
+
+	return 0;
+}
+
+static void pwm_samsung_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
+	unsigned int tcon_chan = to_tcon_channel(pwm->hwpwm);
+	unsigned long flags;
+	u32 tcon;
+
+	spin_lock_irqsave(&samsung_pwm_lock, flags);
+
+	tcon = readl(our_chip->base + REG_TCON);
+	tcon &= ~TCON_AUTORELOAD(tcon_chan);
+	writel(tcon, our_chip->base + REG_TCON);
+
+	/*
+	 * In case the PWM is at 100% duty cycle, force a manual
+	 * update to prevent the signal from staying high.
+	 */
+	if (readl(our_chip->base + REG_TCMPB(pwm->hwpwm)) == (u32)-1U)
+		__pwm_samsung_manual_update(our_chip, pwm);
+
+	our_chip->disabled_mask |= BIT(pwm->hwpwm);
+
+	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
+}
+
+static void pwm_samsung_manual_update(struct samsung_pwm_chip *chip,
+				      struct pwm_device *pwm)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&samsung_pwm_lock, flags);
+
+	__pwm_samsung_manual_update(chip, pwm);
+
+	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
+}
+
+static int __pwm_samsung_config(struct pwm_chip *chip, struct pwm_device *pwm,
+				int duty_ns, int period_ns, bool force_period)
+{
+	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
+	struct samsung_pwm_channel *chan = pwm_get_chip_data(pwm);
+	u32 tin_ns = chan->tin_ns, tcnt, tcmp, oldtcmp;
+
+	tcnt = readl(our_chip->base + REG_TCNTB(pwm->hwpwm));
+	oldtcmp = readl(our_chip->base + REG_TCMPB(pwm->hwpwm));
+
+	/* We need tick count for calculation, not last tick. */
+	++tcnt;
+
+	/* Check to see if we are changing the clock rate of the PWM. */
+	if (chan->period_ns != period_ns || force_period) {
+		unsigned long tin_rate;
+		u32 period;
+
+		period = NSEC_PER_SEC / period_ns;
+
+		dev_dbg(our_chip->chip.dev, "duty_ns=%d, period_ns=%d (%u)\n",
+						duty_ns, period_ns, period);
+
+		tin_rate = pwm_samsung_calc_tin(our_chip, pwm->hwpwm, period);
+
+		dev_dbg(our_chip->chip.dev, "tin_rate=%lu\n", tin_rate);
+
+		tin_ns = NSEC_PER_SEC / tin_rate;
+		tcnt = period_ns / tin_ns;
+	}
+
+	/* Period is too short. */
+	if (tcnt <= 1)
+		return -ERANGE;
+
+	/* Note that counters count down. */
+	tcmp = duty_ns / tin_ns;
+
+	/* 0% duty is not available */
+	if (!tcmp)
+		++tcmp;
+
+	tcmp = tcnt - tcmp;
+
+	/* Decrement to get tick numbers, instead of tick counts. */
+	--tcnt;
+	/* -1UL will give 100% duty. */
+	--tcmp;
+
+	dev_dbg(our_chip->chip.dev,
+				"tin_ns=%u, tcmp=%u/%u\n", tin_ns, tcmp, tcnt);
+
+	/* Update PWM registers. */
+	writel(tcnt, our_chip->base + REG_TCNTB(pwm->hwpwm));
+	writel(tcmp, our_chip->base + REG_TCMPB(pwm->hwpwm));
+
+	/*
+	 * In case the PWM is currently at 100% duty cycle, force a manual
+	 * update to prevent the signal staying high if the PWM is disabled
+	 * shortly afer this update (before it autoreloaded the new values).
+	 */
+	if (oldtcmp == (u32) -1) {
+		dev_dbg(our_chip->chip.dev, "Forcing manual update");
+		pwm_samsung_manual_update(our_chip, pwm);
+	}
+
+	chan->period_ns = period_ns;
+	chan->tin_ns = tin_ns;
+	chan->duty_ns = duty_ns;
+
+	return 0;
+}
+
+static int pwm_samsung_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			      int duty_ns, int period_ns)
+{
+	return __pwm_samsung_config(chip, pwm, duty_ns, period_ns, false);
+}
+
+static void pwm_samsung_set_invert(struct samsung_pwm_chip *chip,
+				   unsigned int channel, bool invert)
+{
+	unsigned int tcon_chan = to_tcon_channel(channel);
+	unsigned long flags;
+	u32 tcon;
+
+	spin_lock_irqsave(&samsung_pwm_lock, flags);
+
+	tcon = readl(chip->base + REG_TCON);
+
+	if (invert) {
+		chip->inverter_mask |= BIT(channel);
+		tcon |= TCON_INVERT(tcon_chan);
+	} else {
+		chip->inverter_mask &= ~BIT(channel);
+		tcon &= ~TCON_INVERT(tcon_chan);
+	}
+
+	writel(tcon, chip->base + REG_TCON);
+
+	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
+}
+
+static int pwm_samsung_set_polarity(struct pwm_chip *chip,
+				    struct pwm_device *pwm,
+				    enum pwm_polarity polarity)
+{
+	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
+	bool invert = (polarity == PWM_POLARITY_NORMAL);
+
+	/* Inverted means normal in the hardware. */
+	pwm_samsung_set_invert(our_chip, pwm->hwpwm, invert);
+
+	return 0;
+}
+
+static int pwm_samsung_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			     const struct pwm_state *state)
+{
+	int err, enabled = pwm->state.enabled;
+
+	if (state->polarity != pwm->state.polarity) {
+		if (enabled) {
+			pwm_samsung_disable(chip, pwm);
+			enabled = false;
+		}
+
+		err = pwm_samsung_set_polarity(chip, pwm, state->polarity);
+		if (err)
+			return err;
+	}
+
+	if (!state->enabled) {
+		if (enabled)
+			pwm_samsung_disable(chip, pwm);
+
+		return 0;
+	}
+
+	/*
+	 * We currently avoid using 64bit arithmetic by using the
+	 * fact that anything faster than 1Hz is easily representable
+	 * by 32bits.
+	 */
+	if (state->period > NSEC_PER_SEC)
+		return -ERANGE;
+
+	err = pwm_samsung_config(chip, pwm, state->duty_cycle, state->period);
+	if (err)
+		return err;
+
+	if (!pwm->state.enabled)
+		err = pwm_samsung_enable(chip, pwm);
+
+	return err;
+}
+
+static const struct pwm_ops pwm_samsung_ops = {
+	.request	= pwm_samsung_request,
+	.free		= pwm_samsung_free,
+	.apply		= pwm_samsung_apply,
+	.owner		= THIS_MODULE,
+};
+
+#ifdef CONFIG_OF
+static const struct samsung_pwm_variant s3c24xx_variant = {
+	.bits		= 16,
+	.div_base	= 1,
+	.has_tint_cstat	= false,
+	.tclk_mask	= BIT(4),
+};
+
+static const struct samsung_pwm_variant s3c64xx_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= BIT(7) | BIT(6) | BIT(5),
+};
+
+static const struct samsung_pwm_variant s5p64x0_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= 0,
+};
+
+static const struct samsung_pwm_variant s5pc100_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= BIT(5),
+};
+
+static const struct of_device_id samsung_pwm_matches[] = {
+	{ .compatible = "samsung,s3c2410-pwm", .data = &s3c24xx_variant },
+	{ .compatible = "samsung,s3c6400-pwm", .data = &s3c64xx_variant },
+	{ .compatible = "samsung,s5p6440-pwm", .data = &s5p64x0_variant },
+	{ .compatible = "samsung,s5pc100-pwm", .data = &s5pc100_variant },
+	{ .compatible = "samsung,exynos4210-pwm", .data = &s5p64x0_variant },
+	{},
+};
+MODULE_DEVICE_TABLE(of, samsung_pwm_matches);
+
+static int pwm_samsung_parse_dt(struct samsung_pwm_chip *chip)
+{
+	struct device_node *np = chip->chip.dev->of_node;
+	const struct of_device_id *match;
+	struct property *prop;
+	const __be32 *cur;
+	u32 val;
+
+	match = of_match_node(samsung_pwm_matches, np);
+	if (!match)
+		return -ENODEV;
+
+	memcpy(&chip->variant, match->data, sizeof(chip->variant));
+
+	of_property_for_each_u32(np, "samsung,pwm-outputs", prop, cur, val) {
+		if (val >= SAMSUNG_PWM_NUM) {
+			dev_err(chip->chip.dev,
+				"%s: invalid channel index in samsung,pwm-outputs property\n",
+								__func__);
+			continue;
+		}
+		chip->variant.output_mask |= BIT(val);
+	}
+
+	return 0;
+}
+#else
+static int pwm_samsung_parse_dt(struct samsung_pwm_chip *chip)
+{
+	return -ENODEV;
+}
+#endif
+
+static int pwm_samsung_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct samsung_pwm_chip *chip;
+	unsigned int chan;
+	int ret;
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (chip == NULL)
+		return -ENOMEM;
+
+	chip->chip.dev = &pdev->dev;
+	chip->chip.ops = &pwm_samsung_ops;
+	chip->chip.npwm = SAMSUNG_PWM_NUM;
+	chip->inverter_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+
+	if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
+		ret = pwm_samsung_parse_dt(chip);
+		if (ret)
+			return ret;
+	} else {
+		if (!pdev->dev.platform_data) {
+			dev_err(&pdev->dev, "no platform data specified\n");
+			return -EINVAL;
+		}
+
+		memcpy(&chip->variant, pdev->dev.platform_data,
+							sizeof(chip->variant));
+	}
+
+	chip->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(chip->base))
+		return PTR_ERR(chip->base);
+
+	chip->base_clk = devm_clk_get(&pdev->dev, "timers");
+	if (IS_ERR(chip->base_clk)) {
+		dev_err(dev, "failed to get timer base clk\n");
+		return PTR_ERR(chip->base_clk);
+	}
+
+	ret = clk_prepare_enable(chip->base_clk);
+	if (ret < 0) {
+		dev_err(dev, "failed to enable base clock\n");
+		return ret;
+	}
+
+	for (chan = 0; chan < SAMSUNG_PWM_NUM; ++chan)
+		if (chip->variant.output_mask & BIT(chan))
+			pwm_samsung_set_invert(chip, chan, true);
+
+	/* Following clocks are optional. */
+	chip->tclk0 = devm_clk_get(&pdev->dev, "pwm-tclk0");
+	chip->tclk1 = devm_clk_get(&pdev->dev, "pwm-tclk1");
+
+	platform_set_drvdata(pdev, chip);
+
+	ret = pwmchip_add(&chip->chip);
+	if (ret < 0) {
+		dev_err(dev, "failed to register PWM chip\n");
+		clk_disable_unprepare(chip->base_clk);
+		return ret;
+	}
+
+	dev_dbg(dev, "base_clk at %lu, tclk0 at %lu, tclk1 at %lu\n",
+		clk_get_rate(chip->base_clk),
+		!IS_ERR(chip->tclk0) ? clk_get_rate(chip->tclk0) : 0,
+		!IS_ERR(chip->tclk1) ? clk_get_rate(chip->tclk1) : 0);
+
+	return 0;
+}
+
+static int pwm_samsung_remove(struct platform_device *pdev)
+{
+	struct samsung_pwm_chip *chip = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&chip->chip);
+
+	clk_disable_unprepare(chip->base_clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pwm_samsung_resume(struct device *dev)
+{
+	struct samsung_pwm_chip *our_chip = dev_get_drvdata(dev);
+	struct pwm_chip *chip = &our_chip->chip;
+	unsigned int i;
+
+	for (i = 0; i < SAMSUNG_PWM_NUM; i++) {
+		struct pwm_device *pwm = &chip->pwms[i];
+		struct samsung_pwm_channel *chan = pwm_get_chip_data(pwm);
+
+		if (!chan)
+			continue;
+
+		if (our_chip->variant.output_mask & BIT(i))
+			pwm_samsung_set_invert(our_chip, i,
+					our_chip->inverter_mask & BIT(i));
+
+		if (chan->period_ns) {
+			__pwm_samsung_config(chip, pwm, chan->duty_ns,
+					     chan->period_ns, true);
+			/* needed to make PWM disable work on Odroid-XU3 */
+			pwm_samsung_manual_update(our_chip, pwm);
+		}
+
+		if (our_chip->disabled_mask & BIT(i))
+			pwm_samsung_disable(chip, pwm);
+		else
+			pwm_samsung_enable(chip, pwm);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pwm_samsung_pm_ops, NULL, pwm_samsung_resume);
+
+static struct platform_driver pwm_samsung_driver = {
+	.driver		= {
+		.name	= "samsung-pwm",
+		.pm	= &pwm_samsung_pm_ops,
+		.of_match_table = of_match_ptr(samsung_pwm_matches),
+	},
+	.probe		= pwm_samsung_probe,
+	.remove		= pwm_samsung_remove,
+};
+module_platform_driver(pwm_samsung_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Tomasz Figa <tomasz.figa@gmail.com>");
+MODULE_ALIAS("platform:samsung-pwm");
diff --git a/drivers/pwm/pwm-sifive.c b/drivers/pwm/pwm-sifive.c
new file mode 100644
index 000000000..393a4b97f
--- /dev/null
+++ b/drivers/pwm/pwm-sifive.c
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017-2018 SiFive
+ * For SiFive's PWM IP block documentation please refer Chapter 14 of
+ * Reference Manual : https://static.dev.sifive.com/FU540-C000-v1.0.pdf
+ *
+ * Limitations:
+ * - When changing both duty cycle and period, we cannot prevent in
+ *   software that the output might produce a period with mixed
+ *   settings (new period length and old duty cycle).
+ * - The hardware cannot generate a 100% duty cycle.
+ * - The hardware generates only inverted output.
+ */
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/bitfield.h>
+
+/* Register offsets */
+#define PWM_SIFIVE_PWMCFG		0x0
+#define PWM_SIFIVE_PWMCOUNT		0x8
+#define PWM_SIFIVE_PWMS			0x10
+#define PWM_SIFIVE_PWMCMP(i)		(0x20 + 4 * (i))
+
+/* PWMCFG fields */
+#define PWM_SIFIVE_PWMCFG_SCALE		GENMASK(3, 0)
+#define PWM_SIFIVE_PWMCFG_STICKY	BIT(8)
+#define PWM_SIFIVE_PWMCFG_ZERO_CMP	BIT(9)
+#define PWM_SIFIVE_PWMCFG_DEGLITCH	BIT(10)
+#define PWM_SIFIVE_PWMCFG_EN_ALWAYS	BIT(12)
+#define PWM_SIFIVE_PWMCFG_EN_ONCE	BIT(13)
+#define PWM_SIFIVE_PWMCFG_CENTER	BIT(16)
+#define PWM_SIFIVE_PWMCFG_GANG		BIT(24)
+#define PWM_SIFIVE_PWMCFG_IP		BIT(28)
+
+#define PWM_SIFIVE_CMPWIDTH		16
+#define PWM_SIFIVE_DEFAULT_PERIOD	10000000
+
+struct pwm_sifive_ddata {
+	struct pwm_chip	chip;
+	struct mutex lock; /* lock to protect user_count and approx_period */
+	struct notifier_block notifier;
+	struct clk *clk;
+	void __iomem *regs;
+	unsigned int real_period;
+	unsigned int approx_period;
+	int user_count;
+};
+
+static inline
+struct pwm_sifive_ddata *pwm_sifive_chip_to_ddata(struct pwm_chip *c)
+{
+	return container_of(c, struct pwm_sifive_ddata, chip);
+}
+
+static int pwm_sifive_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct pwm_sifive_ddata *ddata = pwm_sifive_chip_to_ddata(chip);
+
+	mutex_lock(&ddata->lock);
+	ddata->user_count++;
+	mutex_unlock(&ddata->lock);
+
+	return 0;
+}
+
+static void pwm_sifive_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct pwm_sifive_ddata *ddata = pwm_sifive_chip_to_ddata(chip);
+
+	mutex_lock(&ddata->lock);
+	ddata->user_count--;
+	mutex_unlock(&ddata->lock);
+}
+
+/* Called holding ddata->lock */
+static void pwm_sifive_update_clock(struct pwm_sifive_ddata *ddata,
+				    unsigned long rate)
+{
+	unsigned long long num;
+	unsigned long scale_pow;
+	int scale;
+	u32 val;
+	/*
+	 * The PWM unit is used with pwmzerocmp=0, so the only way to modify the
+	 * period length is using pwmscale which provides the number of bits the
+	 * counter is shifted before being feed to the comparators. A period
+	 * lasts (1 << (PWM_SIFIVE_CMPWIDTH + pwmscale)) clock ticks.
+	 * (1 << (PWM_SIFIVE_CMPWIDTH + scale)) * 10^9/rate = period
+	 */
+	scale_pow = div64_ul(ddata->approx_period * (u64)rate, NSEC_PER_SEC);
+	scale = clamp(ilog2(scale_pow) - PWM_SIFIVE_CMPWIDTH, 0, 0xf);
+
+	val = PWM_SIFIVE_PWMCFG_EN_ALWAYS |
+	      FIELD_PREP(PWM_SIFIVE_PWMCFG_SCALE, scale);
+	writel(val, ddata->regs + PWM_SIFIVE_PWMCFG);
+
+	/* As scale <= 15 the shift operation cannot overflow. */
+	num = (unsigned long long)NSEC_PER_SEC << (PWM_SIFIVE_CMPWIDTH + scale);
+	ddata->real_period = div64_ul(num, rate);
+	dev_dbg(ddata->chip.dev,
+		"New real_period = %u ns\n", ddata->real_period);
+}
+
+static int pwm_sifive_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+				struct pwm_state *state)
+{
+	struct pwm_sifive_ddata *ddata = pwm_sifive_chip_to_ddata(chip);
+	u32 duty, val;
+
+	duty = readl(ddata->regs + PWM_SIFIVE_PWMCMP(pwm->hwpwm));
+
+	state->enabled = duty > 0;
+
+	val = readl(ddata->regs + PWM_SIFIVE_PWMCFG);
+	if (!(val & PWM_SIFIVE_PWMCFG_EN_ALWAYS))
+		state->enabled = false;
+
+	state->period = ddata->real_period;
+	state->duty_cycle =
+		(u64)duty * ddata->real_period >> PWM_SIFIVE_CMPWIDTH;
+	state->polarity = PWM_POLARITY_INVERSED;
+
+	return 0;
+}
+
+static int pwm_sifive_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			    const struct pwm_state *state)
+{
+	struct pwm_sifive_ddata *ddata = pwm_sifive_chip_to_ddata(chip);
+	struct pwm_state cur_state;
+	unsigned int duty_cycle;
+	unsigned long long num;
+	bool enabled;
+	int ret = 0;
+	u32 frac;
+
+	if (state->polarity != PWM_POLARITY_INVERSED)
+		return -EINVAL;
+
+	cur_state = pwm->state;
+	enabled = cur_state.enabled;
+
+	duty_cycle = state->duty_cycle;
+	if (!state->enabled)
+		duty_cycle = 0;
+
+	/*
+	 * The problem of output producing mixed setting as mentioned at top,
+	 * occurs here. To minimize the window for this problem, we are
+	 * calculating the register values first and then writing them
+	 * consecutively
+	 */
+	num = (u64)duty_cycle * (1U << PWM_SIFIVE_CMPWIDTH);
+	frac = DIV64_U64_ROUND_CLOSEST(num, state->period);
+	/* The hardware cannot generate a 100% duty cycle */
+	frac = min(frac, (1U << PWM_SIFIVE_CMPWIDTH) - 1);
+
+	mutex_lock(&ddata->lock);
+	if (state->period != ddata->approx_period) {
+		/*
+		 * Don't let a 2nd user change the period underneath the 1st user.
+		 * However if ddate->approx_period == 0 this is the first time we set
+		 * any period, so let whoever gets here first set the period so other
+		 * users who agree on the period won't fail.
+		 */
+		if (ddata->user_count != 1 && ddata->approx_period) {
+			mutex_unlock(&ddata->lock);
+			return -EBUSY;
+		}
+		ddata->approx_period = state->period;
+		pwm_sifive_update_clock(ddata, clk_get_rate(ddata->clk));
+	}
+	mutex_unlock(&ddata->lock);
+
+	/*
+	 * If the PWM is enabled the clk is already on. So only enable it
+	 * conditionally to have it on exactly once afterwards independent of
+	 * the PWM state.
+	 */
+	if (!enabled) {
+		ret = clk_enable(ddata->clk);
+		if (ret) {
+			dev_err(ddata->chip.dev, "Enable clk failed\n");
+			return ret;
+		}
+	}
+
+	writel(frac, ddata->regs + PWM_SIFIVE_PWMCMP(pwm->hwpwm));
+
+	if (!state->enabled)
+		clk_disable(ddata->clk);
+
+	return 0;
+}
+
+static const struct pwm_ops pwm_sifive_ops = {
+	.request = pwm_sifive_request,
+	.free = pwm_sifive_free,
+	.get_state = pwm_sifive_get_state,
+	.apply = pwm_sifive_apply,
+	.owner = THIS_MODULE,
+};
+
+static int pwm_sifive_clock_notifier(struct notifier_block *nb,
+				     unsigned long event, void *data)
+{
+	struct clk_notifier_data *ndata = data;
+	struct pwm_sifive_ddata *ddata =
+		container_of(nb, struct pwm_sifive_ddata, notifier);
+
+	if (event == POST_RATE_CHANGE) {
+		mutex_lock(&ddata->lock);
+		pwm_sifive_update_clock(ddata, ndata->new_rate);
+		mutex_unlock(&ddata->lock);
+	}
+
+	return NOTIFY_OK;
+}
+
+static int pwm_sifive_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct pwm_sifive_ddata *ddata;
+	struct pwm_chip *chip;
+	int ret;
+	u32 val;
+	unsigned int enabled_pwms = 0, enabled_clks = 1;
+
+	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	mutex_init(&ddata->lock);
+	chip = &ddata->chip;
+	chip->dev = dev;
+	chip->ops = &pwm_sifive_ops;
+	chip->npwm = 4;
+
+	ddata->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ddata->regs))
+		return PTR_ERR(ddata->regs);
+
+	ddata->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(ddata->clk))
+		return dev_err_probe(dev, PTR_ERR(ddata->clk),
+				     "Unable to find controller clock\n");
+
+	ret = clk_prepare_enable(ddata->clk);
+	if (ret) {
+		dev_err(dev, "failed to enable clock for pwm: %d\n", ret);
+		return ret;
+	}
+
+	val = readl(ddata->regs + PWM_SIFIVE_PWMCFG);
+	if (val & PWM_SIFIVE_PWMCFG_EN_ALWAYS) {
+		unsigned int i;
+
+		for (i = 0; i < chip->npwm; ++i) {
+			val = readl(ddata->regs + PWM_SIFIVE_PWMCMP(i));
+			if (val > 0)
+				++enabled_pwms;
+		}
+	}
+
+	/* The clk should be on once for each running PWM. */
+	if (enabled_pwms) {
+		while (enabled_clks < enabled_pwms) {
+			/* This is not expected to fail as the clk is already on */
+			ret = clk_enable(ddata->clk);
+			if (unlikely(ret)) {
+				dev_err_probe(dev, ret, "Failed to enable clk\n");
+				goto disable_clk;
+			}
+			++enabled_clks;
+		}
+	} else {
+		clk_disable(ddata->clk);
+		enabled_clks = 0;
+	}
+
+	/* Watch for changes to underlying clock frequency */
+	ddata->notifier.notifier_call = pwm_sifive_clock_notifier;
+	ret = clk_notifier_register(ddata->clk, &ddata->notifier);
+	if (ret) {
+		dev_err(dev, "failed to register clock notifier: %d\n", ret);
+		goto disable_clk;
+	}
+
+	ret = pwmchip_add(chip);
+	if (ret < 0) {
+		dev_err(dev, "cannot register PWM: %d\n", ret);
+		goto unregister_clk;
+	}
+
+	platform_set_drvdata(pdev, ddata);
+	dev_dbg(dev, "SiFive PWM chip registered %d PWMs\n", chip->npwm);
+
+	return 0;
+
+unregister_clk:
+	clk_notifier_unregister(ddata->clk, &ddata->notifier);
+disable_clk:
+	while (enabled_clks) {
+		clk_disable(ddata->clk);
+		--enabled_clks;
+	}
+	clk_unprepare(ddata->clk);
+
+	return ret;
+}
+
+static int pwm_sifive_remove(struct platform_device *dev)
+{
+	struct pwm_sifive_ddata *ddata = platform_get_drvdata(dev);
+	struct pwm_device *pwm;
+	int ch;
+
+	pwmchip_remove(&ddata->chip);
+	clk_notifier_unregister(ddata->clk, &ddata->notifier);
+
+	for (ch = 0; ch < ddata->chip.npwm; ch++) {
+		pwm = &ddata->chip.pwms[ch];
+		if (pwm->state.enabled)
+			clk_disable(ddata->clk);
+	}
+
+	clk_unprepare(ddata->clk);
+
+	return 0;
+}
+
+static const struct of_device_id pwm_sifive_of_match[] = {
+	{ .compatible = "sifive,pwm0" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, pwm_sifive_of_match);
+
+static struct platform_driver pwm_sifive_driver = {
+	.probe = pwm_sifive_probe,
+	.remove = pwm_sifive_remove,
+	.driver = {
+		.name = "pwm-sifive",
+		.of_match_table = pwm_sifive_of_match,
+	},
+};
+module_platform_driver(pwm_sifive_driver);
+
+MODULE_DESCRIPTION("SiFive PWM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-sl28cpld.c b/drivers/pwm/pwm-sl28cpld.c
new file mode 100644
index 000000000..e64900ad4
--- /dev/null
+++ b/drivers/pwm/pwm-sl28cpld.c
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sl28cpld PWM driver
+ *
+ * Copyright (c) 2020 Michael Walle <michael@walle.cc>
+ *
+ * There is no public datasheet available for this PWM core. But it is easy
+ * enough to be briefly explained. It consists of one 8-bit counter. The PWM
+ * supports four distinct frequencies by selecting when to reset the counter.
+ * With the prescaler setting you can select which bit of the counter is used
+ * to reset it. This implies that the higher the frequency the less remaining
+ * bits are available for the actual counter.
+ *
+ * Let cnt[7:0] be the counter, clocked at 32kHz:
+ * +-----------+--------+--------------+-----------+---------------+
+ * | prescaler |  reset | counter bits | frequency | period length |
+ * +-----------+--------+--------------+-----------+---------------+
+ * |         0 | cnt[7] |     cnt[6:0] |    250 Hz |    4000000 ns |
+ * |         1 | cnt[6] |     cnt[5:0] |    500 Hz |    2000000 ns |
+ * |         2 | cnt[5] |     cnt[4:0] |     1 kHz |    1000000 ns |
+ * |         3 | cnt[4] |     cnt[3:0] |     2 kHz |     500000 ns |
+ * +-----------+--------+--------------+-----------+---------------+
+ *
+ * Limitations:
+ * - The hardware cannot generate a 100% duty cycle if the prescaler is 0.
+ * - The hardware cannot atomically set the prescaler and the counter value,
+ *   which might lead to glitches and inconsistent states if a write fails.
+ * - The counter is not reset if you switch the prescaler which leads
+ *   to glitches, too.
+ * - The duty cycle will switch immediately and not after a complete cycle.
+ * - Depending on the actual implementation, disabling the PWM might have
+ *   side effects. For example, if the output pin is shared with a GPIO pin
+ *   it will automatically switch back to GPIO mode.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+
+/*
+ * PWM timer block registers.
+ */
+#define SL28CPLD_PWM_CTRL			0x00
+#define   SL28CPLD_PWM_CTRL_ENABLE		BIT(7)
+#define   SL28CPLD_PWM_CTRL_PRESCALER_MASK	GENMASK(1, 0)
+#define SL28CPLD_PWM_CYCLE			0x01
+#define   SL28CPLD_PWM_CYCLE_MAX		GENMASK(6, 0)
+
+#define SL28CPLD_PWM_CLK			32000 /* 32 kHz */
+#define SL28CPLD_PWM_MAX_DUTY_CYCLE(prescaler)	(1 << (7 - (prescaler)))
+#define SL28CPLD_PWM_PERIOD(prescaler) \
+	(NSEC_PER_SEC / SL28CPLD_PWM_CLK * SL28CPLD_PWM_MAX_DUTY_CYCLE(prescaler))
+
+/*
+ * We calculate the duty cycle like this:
+ *   duty_cycle_ns = pwm_cycle_reg * max_period_ns / max_duty_cycle
+ *
+ * With
+ *   max_period_ns = 1 << (7 - prescaler) / SL28CPLD_PWM_CLK * NSEC_PER_SEC
+ *   max_duty_cycle = 1 << (7 - prescaler)
+ * this then simplifies to:
+ *   duty_cycle_ns = pwm_cycle_reg / SL28CPLD_PWM_CLK * NSEC_PER_SEC
+ *                 = NSEC_PER_SEC / SL28CPLD_PWM_CLK * pwm_cycle_reg
+ *
+ * NSEC_PER_SEC is a multiple of SL28CPLD_PWM_CLK, therefore we're not losing
+ * precision by doing the divison first.
+ */
+#define SL28CPLD_PWM_TO_DUTY_CYCLE(reg) \
+	(NSEC_PER_SEC / SL28CPLD_PWM_CLK * (reg))
+#define SL28CPLD_PWM_FROM_DUTY_CYCLE(duty_cycle) \
+	(DIV_ROUND_DOWN_ULL((duty_cycle), NSEC_PER_SEC / SL28CPLD_PWM_CLK))
+
+#define sl28cpld_pwm_read(priv, reg, val) \
+	regmap_read((priv)->regmap, (priv)->offset + (reg), (val))
+#define sl28cpld_pwm_write(priv, reg, val) \
+	regmap_write((priv)->regmap, (priv)->offset + (reg), (val))
+
+struct sl28cpld_pwm {
+	struct pwm_chip pwm_chip;
+	struct regmap *regmap;
+	u32 offset;
+};
+#define sl28cpld_pwm_from_chip(_chip) \
+	container_of(_chip, struct sl28cpld_pwm, pwm_chip)
+
+static int sl28cpld_pwm_get_state(struct pwm_chip *chip,
+				  struct pwm_device *pwm,
+				  struct pwm_state *state)
+{
+	struct sl28cpld_pwm *priv = sl28cpld_pwm_from_chip(chip);
+	unsigned int reg;
+	int prescaler;
+
+	sl28cpld_pwm_read(priv, SL28CPLD_PWM_CTRL, &reg);
+
+	state->enabled = reg & SL28CPLD_PWM_CTRL_ENABLE;
+
+	prescaler = FIELD_GET(SL28CPLD_PWM_CTRL_PRESCALER_MASK, reg);
+	state->period = SL28CPLD_PWM_PERIOD(prescaler);
+
+	sl28cpld_pwm_read(priv, SL28CPLD_PWM_CYCLE, &reg);
+	state->duty_cycle = SL28CPLD_PWM_TO_DUTY_CYCLE(reg);
+	state->polarity = PWM_POLARITY_NORMAL;
+
+	/*
+	 * Sanitize values for the PWM core. Depending on the prescaler it
+	 * might happen that we calculate a duty_cycle greater than the actual
+	 * period. This might happen if someone (e.g. the bootloader) sets an
+	 * invalid combination of values. The behavior of the hardware is
+	 * undefined in this case. But we need to report sane values back to
+	 * the PWM core.
+	 */
+	state->duty_cycle = min(state->duty_cycle, state->period);
+
+	return 0;
+}
+
+static int sl28cpld_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			      const struct pwm_state *state)
+{
+	struct sl28cpld_pwm *priv = sl28cpld_pwm_from_chip(chip);
+	unsigned int cycle, prescaler;
+	bool write_duty_cycle_first;
+	int ret;
+	u8 ctrl;
+
+	/* Polarity inversion is not supported */
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	/*
+	 * Calculate the prescaler. Pick the biggest period that isn't
+	 * bigger than the requested period.
+	 */
+	prescaler = DIV_ROUND_UP_ULL(SL28CPLD_PWM_PERIOD(0), state->period);
+	prescaler = order_base_2(prescaler);
+
+	if (prescaler > field_max(SL28CPLD_PWM_CTRL_PRESCALER_MASK))
+		return -ERANGE;
+
+	ctrl = FIELD_PREP(SL28CPLD_PWM_CTRL_PRESCALER_MASK, prescaler);
+	if (state->enabled)
+		ctrl |= SL28CPLD_PWM_CTRL_ENABLE;
+
+	cycle = SL28CPLD_PWM_FROM_DUTY_CYCLE(state->duty_cycle);
+	cycle = min_t(unsigned int, cycle, SL28CPLD_PWM_MAX_DUTY_CYCLE(prescaler));
+
+	/*
+	 * Work around the hardware limitation. See also above. Trap 100% duty
+	 * cycle if the prescaler is 0. Set prescaler to 1 instead. We don't
+	 * care about the frequency because its "all-one" in either case.
+	 *
+	 * We don't need to check the actual prescaler setting, because only
+	 * if the prescaler is 0 we can have this particular value.
+	 */
+	if (cycle == SL28CPLD_PWM_MAX_DUTY_CYCLE(0)) {
+		ctrl &= ~SL28CPLD_PWM_CTRL_PRESCALER_MASK;
+		ctrl |= FIELD_PREP(SL28CPLD_PWM_CTRL_PRESCALER_MASK, 1);
+		cycle = SL28CPLD_PWM_MAX_DUTY_CYCLE(1);
+	}
+
+	/*
+	 * To avoid glitches when we switch the prescaler, we have to make sure
+	 * we have a valid duty cycle for the new mode.
+	 *
+	 * Take the current prescaler (or the current period length) into
+	 * account to decide whether we have to write the duty cycle or the new
+	 * prescaler first. If the period length is decreasing we have to
+	 * write the duty cycle first.
+	 */
+	write_duty_cycle_first = pwm->state.period > state->period;
+
+	if (write_duty_cycle_first) {
+		ret = sl28cpld_pwm_write(priv, SL28CPLD_PWM_CYCLE, cycle);
+		if (ret)
+			return ret;
+	}
+
+	ret = sl28cpld_pwm_write(priv, SL28CPLD_PWM_CTRL, ctrl);
+	if (ret)
+		return ret;
+
+	if (!write_duty_cycle_first) {
+		ret = sl28cpld_pwm_write(priv, SL28CPLD_PWM_CYCLE, cycle);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct pwm_ops sl28cpld_pwm_ops = {
+	.apply = sl28cpld_pwm_apply,
+	.get_state = sl28cpld_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static int sl28cpld_pwm_probe(struct platform_device *pdev)
+{
+	struct sl28cpld_pwm *priv;
+	struct pwm_chip *chip;
+	int ret;
+
+	if (!pdev->dev.parent) {
+		dev_err(&pdev->dev, "no parent device\n");
+		return -ENODEV;
+	}
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!priv->regmap) {
+		dev_err(&pdev->dev, "could not get parent regmap\n");
+		return -ENODEV;
+	}
+
+	ret = device_property_read_u32(&pdev->dev, "reg", &priv->offset);
+	if (ret) {
+		dev_err(&pdev->dev, "no 'reg' property found (%pe)\n",
+			ERR_PTR(ret));
+		return -EINVAL;
+	}
+
+	/* Initialize the pwm_chip structure */
+	chip = &priv->pwm_chip;
+	chip->dev = &pdev->dev;
+	chip->ops = &sl28cpld_pwm_ops;
+	chip->npwm = 1;
+
+	ret = devm_pwmchip_add(&pdev->dev, &priv->pwm_chip);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add PWM chip (%pe)",
+			ERR_PTR(ret));
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id sl28cpld_pwm_of_match[] = {
+	{ .compatible = "kontron,sl28cpld-pwm" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sl28cpld_pwm_of_match);
+
+static struct platform_driver sl28cpld_pwm_driver = {
+	.probe = sl28cpld_pwm_probe,
+	.driver = {
+		.name = "sl28cpld-pwm",
+		.of_match_table = sl28cpld_pwm_of_match,
+	},
+};
+module_platform_driver(sl28cpld_pwm_driver);
+
+MODULE_DESCRIPTION("sl28cpld PWM Driver");
+MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-spear.c b/drivers/pwm/pwm-spear.c
new file mode 100644
index 000000000..54c799096
--- /dev/null
+++ b/drivers/pwm/pwm-spear.c
@@ -0,0 +1,284 @@
+/*
+ * ST Microelectronics SPEAr Pulse Width Modulator driver
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Shiraz Hashim <shiraz.linux.kernel@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define NUM_PWM		4
+
+/* PWM registers and bits definitions */
+#define PWMCR			0x00	/* Control Register */
+#define PWMCR_PWM_ENABLE	0x1
+#define PWMCR_PRESCALE_SHIFT	2
+#define PWMCR_MIN_PRESCALE	0x00
+#define PWMCR_MAX_PRESCALE	0x3FFF
+
+#define PWMDCR			0x04	/* Duty Cycle Register */
+#define PWMDCR_MIN_DUTY		0x0001
+#define PWMDCR_MAX_DUTY		0xFFFF
+
+#define PWMPCR			0x08	/* Period Register */
+#define PWMPCR_MIN_PERIOD	0x0001
+#define PWMPCR_MAX_PERIOD	0xFFFF
+
+/* Following only available on 13xx SoCs */
+#define PWMMCR			0x3C	/* Master Control Register */
+#define PWMMCR_PWM_ENABLE	0x1
+
+/**
+ * struct spear_pwm_chip - struct representing pwm chip
+ *
+ * @mmio_base: base address of pwm chip
+ * @clk: pointer to clk structure of pwm chip
+ * @chip: linux pwm chip representation
+ */
+struct spear_pwm_chip {
+	void __iomem *mmio_base;
+	struct clk *clk;
+	struct pwm_chip chip;
+};
+
+static inline struct spear_pwm_chip *to_spear_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct spear_pwm_chip, chip);
+}
+
+static inline u32 spear_pwm_readl(struct spear_pwm_chip *chip, unsigned int num,
+				  unsigned long offset)
+{
+	return readl_relaxed(chip->mmio_base + (num << 4) + offset);
+}
+
+static inline void spear_pwm_writel(struct spear_pwm_chip *chip,
+				    unsigned int num, unsigned long offset,
+				    unsigned long val)
+{
+	writel_relaxed(val, chip->mmio_base + (num << 4) + offset);
+}
+
+static int spear_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			    u64 duty_ns, u64 period_ns)
+{
+	struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
+	u64 val, div, clk_rate;
+	unsigned long prescale = PWMCR_MIN_PRESCALE, pv, dc;
+	int ret;
+
+	/*
+	 * Find pv, dc and prescale to suit duty_ns and period_ns. This is done
+	 * according to formulas described below:
+	 *
+	 * period_ns = 10^9 * (PRESCALE + 1) * PV / PWM_CLK_RATE
+	 * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+	 *
+	 * PV = (PWM_CLK_RATE * period_ns) / (10^9 * (PRESCALE + 1))
+	 * DC = (PWM_CLK_RATE * duty_ns) / (10^9 * (PRESCALE + 1))
+	 */
+	clk_rate = clk_get_rate(pc->clk);
+	while (1) {
+		div = 1000000000;
+		div *= 1 + prescale;
+		val = clk_rate * period_ns;
+		pv = div64_u64(val, div);
+		val = clk_rate * duty_ns;
+		dc = div64_u64(val, div);
+
+		/* if duty_ns and period_ns are not achievable then return */
+		if (pv < PWMPCR_MIN_PERIOD || dc < PWMDCR_MIN_DUTY)
+			return -EINVAL;
+
+		/*
+		 * if pv and dc have crossed their upper limit, then increase
+		 * prescale and recalculate pv and dc.
+		 */
+		if (pv > PWMPCR_MAX_PERIOD || dc > PWMDCR_MAX_DUTY) {
+			if (++prescale > PWMCR_MAX_PRESCALE)
+				return -EINVAL;
+			continue;
+		}
+		break;
+	}
+
+	/*
+	 * NOTE: the clock to PWM has to be enabled first before writing to the
+	 * registers.
+	 */
+	ret = clk_enable(pc->clk);
+	if (ret)
+		return ret;
+
+	spear_pwm_writel(pc, pwm->hwpwm, PWMCR,
+			prescale << PWMCR_PRESCALE_SHIFT);
+	spear_pwm_writel(pc, pwm->hwpwm, PWMDCR, dc);
+	spear_pwm_writel(pc, pwm->hwpwm, PWMPCR, pv);
+	clk_disable(pc->clk);
+
+	return 0;
+}
+
+static int spear_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
+	int rc = 0;
+	u32 val;
+
+	rc = clk_enable(pc->clk);
+	if (rc)
+		return rc;
+
+	val = spear_pwm_readl(pc, pwm->hwpwm, PWMCR);
+	val |= PWMCR_PWM_ENABLE;
+	spear_pwm_writel(pc, pwm->hwpwm, PWMCR, val);
+
+	return 0;
+}
+
+static void spear_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
+	u32 val;
+
+	val = spear_pwm_readl(pc, pwm->hwpwm, PWMCR);
+	val &= ~PWMCR_PWM_ENABLE;
+	spear_pwm_writel(pc, pwm->hwpwm, PWMCR, val);
+
+	clk_disable(pc->clk);
+}
+
+static int spear_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			   const struct pwm_state *state)
+{
+	int err;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		if (pwm->state.enabled)
+			spear_pwm_disable(chip, pwm);
+		return 0;
+	}
+
+	err = spear_pwm_config(chip, pwm, state->duty_cycle, state->period);
+	if (err)
+		return err;
+
+	if (!pwm->state.enabled)
+		return spear_pwm_enable(chip, pwm);
+
+	return 0;
+}
+
+static const struct pwm_ops spear_pwm_ops = {
+	.apply = spear_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static int spear_pwm_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct spear_pwm_chip *pc;
+	int ret;
+	u32 val;
+
+	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
+	if (!pc)
+		return -ENOMEM;
+
+	pc->mmio_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(pc->mmio_base))
+		return PTR_ERR(pc->mmio_base);
+
+	pc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pc->clk))
+		return PTR_ERR(pc->clk);
+
+	platform_set_drvdata(pdev, pc);
+
+	pc->chip.dev = &pdev->dev;
+	pc->chip.ops = &spear_pwm_ops;
+	pc->chip.npwm = NUM_PWM;
+
+	ret = clk_prepare(pc->clk);
+	if (ret)
+		return ret;
+
+	if (of_device_is_compatible(np, "st,spear1340-pwm")) {
+		ret = clk_enable(pc->clk);
+		if (ret) {
+			clk_unprepare(pc->clk);
+			return ret;
+		}
+		/*
+		 * Following enables PWM chip, channels would still be
+		 * enabled individually through their control register
+		 */
+		val = readl_relaxed(pc->mmio_base + PWMMCR);
+		val |= PWMMCR_PWM_ENABLE;
+		writel_relaxed(val, pc->mmio_base + PWMMCR);
+
+		clk_disable(pc->clk);
+	}
+
+	ret = pwmchip_add(&pc->chip);
+	if (ret < 0) {
+		clk_unprepare(pc->clk);
+		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+	}
+
+	return ret;
+}
+
+static int spear_pwm_remove(struct platform_device *pdev)
+{
+	struct spear_pwm_chip *pc = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&pc->chip);
+
+	/* clk was prepared in probe, hence unprepare it here */
+	clk_unprepare(pc->clk);
+
+	return 0;
+}
+
+static const struct of_device_id spear_pwm_of_match[] = {
+	{ .compatible = "st,spear320-pwm" },
+	{ .compatible = "st,spear1340-pwm" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, spear_pwm_of_match);
+
+static struct platform_driver spear_pwm_driver = {
+	.driver = {
+		.name = "spear-pwm",
+		.of_match_table = spear_pwm_of_match,
+	},
+	.probe = spear_pwm_probe,
+	.remove = spear_pwm_remove,
+};
+
+module_platform_driver(spear_pwm_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Shiraz Hashim <shiraz.linux.kernel@gmail.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.com>");
+MODULE_ALIAS("platform:spear-pwm");
diff --git a/drivers/pwm/pwm-sprd.c b/drivers/pwm/pwm-sprd.c
new file mode 100644
index 000000000..87d5cb7f6
--- /dev/null
+++ b/drivers/pwm/pwm-sprd.c
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Spreadtrum Communications Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+#define SPRD_PWM_PRESCALE	0x0
+#define SPRD_PWM_MOD		0x4
+#define SPRD_PWM_DUTY		0x8
+#define SPRD_PWM_ENABLE		0x18
+
+#define SPRD_PWM_MOD_MAX	GENMASK(7, 0)
+#define SPRD_PWM_DUTY_MSK	GENMASK(15, 0)
+#define SPRD_PWM_PRESCALE_MSK	GENMASK(7, 0)
+#define SPRD_PWM_ENABLE_BIT	BIT(0)
+
+#define SPRD_PWM_CHN_NUM	4
+#define SPRD_PWM_REGS_SHIFT	5
+#define SPRD_PWM_CHN_CLKS_NUM	2
+#define SPRD_PWM_CHN_OUTPUT_CLK	1
+
+struct sprd_pwm_chn {
+	struct clk_bulk_data clks[SPRD_PWM_CHN_CLKS_NUM];
+	u32 clk_rate;
+};
+
+struct sprd_pwm_chip {
+	void __iomem *base;
+	struct device *dev;
+	struct pwm_chip chip;
+	int num_pwms;
+	struct sprd_pwm_chn chn[SPRD_PWM_CHN_NUM];
+};
+
+/*
+ * The list of clocks required by PWM channels, and each channel has 2 clocks:
+ * enable clock and pwm clock.
+ */
+static const char * const sprd_pwm_clks[] = {
+	"enable0", "pwm0",
+	"enable1", "pwm1",
+	"enable2", "pwm2",
+	"enable3", "pwm3",
+};
+
+static u32 sprd_pwm_read(struct sprd_pwm_chip *spc, u32 hwid, u32 reg)
+{
+	u32 offset = reg + (hwid << SPRD_PWM_REGS_SHIFT);
+
+	return readl_relaxed(spc->base + offset);
+}
+
+static void sprd_pwm_write(struct sprd_pwm_chip *spc, u32 hwid,
+			   u32 reg, u32 val)
+{
+	u32 offset = reg + (hwid << SPRD_PWM_REGS_SHIFT);
+
+	writel_relaxed(val, spc->base + offset);
+}
+
+static int sprd_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+			      struct pwm_state *state)
+{
+	struct sprd_pwm_chip *spc =
+		container_of(chip, struct sprd_pwm_chip, chip);
+	struct sprd_pwm_chn *chn = &spc->chn[pwm->hwpwm];
+	u32 val, duty, prescale;
+	u64 tmp;
+	int ret;
+
+	/*
+	 * The clocks to PWM channel has to be enabled first before
+	 * reading to the registers.
+	 */
+	ret = clk_bulk_prepare_enable(SPRD_PWM_CHN_CLKS_NUM, chn->clks);
+	if (ret) {
+		dev_err(spc->dev, "failed to enable pwm%u clocks\n",
+			pwm->hwpwm);
+		return 0;
+	}
+
+	val = sprd_pwm_read(spc, pwm->hwpwm, SPRD_PWM_ENABLE);
+	if (val & SPRD_PWM_ENABLE_BIT)
+		state->enabled = true;
+	else
+		state->enabled = false;
+
+	/*
+	 * The hardware provides a counter that is feed by the source clock.
+	 * The period length is (PRESCALE + 1) * MOD counter steps.
+	 * The duty cycle length is (PRESCALE + 1) * DUTY counter steps.
+	 * Thus the period_ns and duty_ns calculation formula should be:
+	 * period_ns = NSEC_PER_SEC * (prescale + 1) * mod / clk_rate
+	 * duty_ns = NSEC_PER_SEC * (prescale + 1) * duty / clk_rate
+	 */
+	val = sprd_pwm_read(spc, pwm->hwpwm, SPRD_PWM_PRESCALE);
+	prescale = val & SPRD_PWM_PRESCALE_MSK;
+	tmp = (prescale + 1) * NSEC_PER_SEC * SPRD_PWM_MOD_MAX;
+	state->period = DIV_ROUND_CLOSEST_ULL(tmp, chn->clk_rate);
+
+	val = sprd_pwm_read(spc, pwm->hwpwm, SPRD_PWM_DUTY);
+	duty = val & SPRD_PWM_DUTY_MSK;
+	tmp = (prescale + 1) * NSEC_PER_SEC * duty;
+	state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, chn->clk_rate);
+	state->polarity = PWM_POLARITY_NORMAL;
+
+	/* Disable PWM clocks if the PWM channel is not in enable state. */
+	if (!state->enabled)
+		clk_bulk_disable_unprepare(SPRD_PWM_CHN_CLKS_NUM, chn->clks);
+
+	return 0;
+}
+
+static int sprd_pwm_config(struct sprd_pwm_chip *spc, struct pwm_device *pwm,
+			   int duty_ns, int period_ns)
+{
+	struct sprd_pwm_chn *chn = &spc->chn[pwm->hwpwm];
+	u32 prescale, duty;
+	u64 tmp;
+
+	/*
+	 * The hardware provides a counter that is feed by the source clock.
+	 * The period length is (PRESCALE + 1) * MOD counter steps.
+	 * The duty cycle length is (PRESCALE + 1) * DUTY counter steps.
+	 *
+	 * To keep the maths simple we're always using MOD = SPRD_PWM_MOD_MAX.
+	 * The value for PRESCALE is selected such that the resulting period
+	 * gets the maximal length not bigger than the requested one with the
+	 * given settings (MOD = SPRD_PWM_MOD_MAX and input clock).
+	 */
+	duty = duty_ns * SPRD_PWM_MOD_MAX / period_ns;
+
+	tmp = (u64)chn->clk_rate * period_ns;
+	do_div(tmp, NSEC_PER_SEC);
+	prescale = DIV_ROUND_CLOSEST_ULL(tmp, SPRD_PWM_MOD_MAX) - 1;
+	if (prescale > SPRD_PWM_PRESCALE_MSK)
+		prescale = SPRD_PWM_PRESCALE_MSK;
+
+	/*
+	 * Note: Writing DUTY triggers the hardware to actually apply the
+	 * values written to MOD and DUTY to the output, so must keep writing
+	 * DUTY last.
+	 *
+	 * The hardware can ensures that current running period is completed
+	 * before changing a new configuration to avoid mixed settings.
+	 */
+	sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_PRESCALE, prescale);
+	sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_MOD, SPRD_PWM_MOD_MAX);
+	sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_DUTY, duty);
+
+	return 0;
+}
+
+static int sprd_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			  const struct pwm_state *state)
+{
+	struct sprd_pwm_chip *spc =
+		container_of(chip, struct sprd_pwm_chip, chip);
+	struct sprd_pwm_chn *chn = &spc->chn[pwm->hwpwm];
+	struct pwm_state *cstate = &pwm->state;
+	int ret;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (state->enabled) {
+		if (!cstate->enabled) {
+			/*
+			 * The clocks to PWM channel has to be enabled first
+			 * before writing to the registers.
+			 */
+			ret = clk_bulk_prepare_enable(SPRD_PWM_CHN_CLKS_NUM,
+						      chn->clks);
+			if (ret) {
+				dev_err(spc->dev,
+					"failed to enable pwm%u clocks\n",
+					pwm->hwpwm);
+				return ret;
+			}
+		}
+
+		ret = sprd_pwm_config(spc, pwm, state->duty_cycle,
+				      state->period);
+		if (ret)
+			return ret;
+
+		sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_ENABLE, 1);
+	} else if (cstate->enabled) {
+		/*
+		 * Note: After setting SPRD_PWM_ENABLE to zero, the controller
+		 * will not wait for current period to be completed, instead it
+		 * will stop the PWM channel immediately.
+		 */
+		sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_ENABLE, 0);
+
+		clk_bulk_disable_unprepare(SPRD_PWM_CHN_CLKS_NUM, chn->clks);
+	}
+
+	return 0;
+}
+
+static const struct pwm_ops sprd_pwm_ops = {
+	.apply = sprd_pwm_apply,
+	.get_state = sprd_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static int sprd_pwm_clk_init(struct sprd_pwm_chip *spc)
+{
+	struct clk *clk_pwm;
+	int ret, i;
+
+	for (i = 0; i < SPRD_PWM_CHN_NUM; i++) {
+		struct sprd_pwm_chn *chn = &spc->chn[i];
+		int j;
+
+		for (j = 0; j < SPRD_PWM_CHN_CLKS_NUM; ++j)
+			chn->clks[j].id =
+				sprd_pwm_clks[i * SPRD_PWM_CHN_CLKS_NUM + j];
+
+		ret = devm_clk_bulk_get(spc->dev, SPRD_PWM_CHN_CLKS_NUM,
+					chn->clks);
+		if (ret) {
+			if (ret == -ENOENT)
+				break;
+
+			return dev_err_probe(spc->dev, ret,
+					     "failed to get channel clocks\n");
+		}
+
+		clk_pwm = chn->clks[SPRD_PWM_CHN_OUTPUT_CLK].clk;
+		chn->clk_rate = clk_get_rate(clk_pwm);
+	}
+
+	if (!i) {
+		dev_err(spc->dev, "no available PWM channels\n");
+		return -ENODEV;
+	}
+
+	spc->num_pwms = i;
+
+	return 0;
+}
+
+static int sprd_pwm_probe(struct platform_device *pdev)
+{
+	struct sprd_pwm_chip *spc;
+	int ret;
+
+	spc = devm_kzalloc(&pdev->dev, sizeof(*spc), GFP_KERNEL);
+	if (!spc)
+		return -ENOMEM;
+
+	spc->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(spc->base))
+		return PTR_ERR(spc->base);
+
+	spc->dev = &pdev->dev;
+	platform_set_drvdata(pdev, spc);
+
+	ret = sprd_pwm_clk_init(spc);
+	if (ret)
+		return ret;
+
+	spc->chip.dev = &pdev->dev;
+	spc->chip.ops = &sprd_pwm_ops;
+	spc->chip.npwm = spc->num_pwms;
+
+	ret = pwmchip_add(&spc->chip);
+	if (ret)
+		dev_err(&pdev->dev, "failed to add PWM chip\n");
+
+	return ret;
+}
+
+static int sprd_pwm_remove(struct platform_device *pdev)
+{
+	struct sprd_pwm_chip *spc = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&spc->chip);
+
+	return 0;
+}
+
+static const struct of_device_id sprd_pwm_of_match[] = {
+	{ .compatible = "sprd,ums512-pwm", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, sprd_pwm_of_match);
+
+static struct platform_driver sprd_pwm_driver = {
+	.driver = {
+		.name = "sprd-pwm",
+		.of_match_table = sprd_pwm_of_match,
+	},
+	.probe = sprd_pwm_probe,
+	.remove = sprd_pwm_remove,
+};
+
+module_platform_driver(sprd_pwm_driver);
+
+MODULE_DESCRIPTION("Spreadtrum PWM Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-sti.c b/drivers/pwm/pwm-sti.c
new file mode 100644
index 000000000..652fdb8dc
--- /dev/null
+++ b/drivers/pwm/pwm-sti.c
@@ -0,0 +1,701 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * PWM device driver for ST SoCs
+ *
+ * Copyright (C) 2013-2016 STMicroelectronics (R&D) Limited
+ *
+ * Author: Ajit Pal Singh <ajitpal.singh@st.com>
+ *         Lee Jones <lee.jones@linaro.org>
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/math64.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include <linux/wait.h>
+
+#define PWM_OUT_VAL(x)	(0x00 + (4 * (x))) /* Device's Duty Cycle register */
+#define PWM_CPT_VAL(x)	(0x10 + (4 * (x))) /* Capture value */
+#define PWM_CPT_EDGE(x) (0x30 + (4 * (x))) /* Edge to capture on */
+
+#define STI_PWM_CTRL		0x50	/* Control/Config register */
+#define STI_INT_EN		0x54	/* Interrupt Enable/Disable register */
+#define STI_INT_STA		0x58	/* Interrupt Status register */
+#define PWM_INT_ACK		0x5c
+#define PWM_PRESCALE_LOW_MASK	0x0f
+#define PWM_PRESCALE_HIGH_MASK	0xf0
+#define PWM_CPT_EDGE_MASK	0x03
+#define PWM_INT_ACK_MASK	0x1ff
+
+#define STI_MAX_CPT_DEVS	4
+#define CPT_DC_MAX		0xff
+
+/* Regfield IDs */
+enum {
+	/* Bits in PWM_CTRL*/
+	PWMCLK_PRESCALE_LOW,
+	PWMCLK_PRESCALE_HIGH,
+	CPTCLK_PRESCALE,
+
+	PWM_OUT_EN,
+	PWM_CPT_EN,
+
+	PWM_CPT_INT_EN,
+	PWM_CPT_INT_STAT,
+
+	/* Keep last */
+	MAX_REGFIELDS
+};
+
+/*
+ * Each capture input can be programmed to detect rising-edge, falling-edge,
+ * either edge or neither egde.
+ */
+enum sti_cpt_edge {
+	CPT_EDGE_DISABLED,
+	CPT_EDGE_RISING,
+	CPT_EDGE_FALLING,
+	CPT_EDGE_BOTH,
+};
+
+struct sti_cpt_ddata {
+	u32 snapshot[3];
+	unsigned int index;
+	struct mutex lock;
+	wait_queue_head_t wait;
+};
+
+struct sti_pwm_compat_data {
+	const struct reg_field *reg_fields;
+	unsigned int pwm_num_devs;
+	unsigned int cpt_num_devs;
+	unsigned int max_pwm_cnt;
+	unsigned int max_prescale;
+	struct sti_cpt_ddata *ddata;
+};
+
+struct sti_pwm_chip {
+	struct device *dev;
+	struct clk *pwm_clk;
+	struct clk *cpt_clk;
+	struct regmap *regmap;
+	struct sti_pwm_compat_data *cdata;
+	struct regmap_field *prescale_low;
+	struct regmap_field *prescale_high;
+	struct regmap_field *pwm_out_en;
+	struct regmap_field *pwm_cpt_en;
+	struct regmap_field *pwm_cpt_int_en;
+	struct regmap_field *pwm_cpt_int_stat;
+	struct pwm_chip chip;
+	struct pwm_device *cur;
+	unsigned long configured;
+	unsigned int en_count;
+	struct mutex sti_pwm_lock; /* To sync between enable/disable calls */
+	void __iomem *mmio;
+};
+
+static const struct reg_field sti_pwm_regfields[MAX_REGFIELDS] = {
+	[PWMCLK_PRESCALE_LOW] = REG_FIELD(STI_PWM_CTRL, 0, 3),
+	[PWMCLK_PRESCALE_HIGH] = REG_FIELD(STI_PWM_CTRL, 11, 14),
+	[CPTCLK_PRESCALE] = REG_FIELD(STI_PWM_CTRL, 4, 8),
+	[PWM_OUT_EN] = REG_FIELD(STI_PWM_CTRL, 9, 9),
+	[PWM_CPT_EN] = REG_FIELD(STI_PWM_CTRL, 10, 10),
+	[PWM_CPT_INT_EN] = REG_FIELD(STI_INT_EN, 1, 4),
+	[PWM_CPT_INT_STAT] = REG_FIELD(STI_INT_STA, 1, 4),
+};
+
+static inline struct sti_pwm_chip *to_sti_pwmchip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct sti_pwm_chip, chip);
+}
+
+/*
+ * Calculate the prescaler value corresponding to the period.
+ */
+static int sti_pwm_get_prescale(struct sti_pwm_chip *pc, unsigned long period,
+				unsigned int *prescale)
+{
+	struct sti_pwm_compat_data *cdata = pc->cdata;
+	unsigned long clk_rate;
+	unsigned long value;
+	unsigned int ps;
+
+	clk_rate = clk_get_rate(pc->pwm_clk);
+	if (!clk_rate) {
+		dev_err(pc->dev, "failed to get clock rate\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * prescale = ((period_ns * clk_rate) / (10^9 * (max_pwm_cnt + 1)) - 1
+	 */
+	value = NSEC_PER_SEC / clk_rate;
+	value *= cdata->max_pwm_cnt + 1;
+
+	if (period % value)
+		return -EINVAL;
+
+	ps  = period / value - 1;
+	if (ps > cdata->max_prescale)
+		return -EINVAL;
+
+	*prescale = ps;
+
+	return 0;
+}
+
+/*
+ * For STiH4xx PWM IP, the PWM period is fixed to 256 local clock cycles. The
+ * only way to change the period (apart from changing the PWM input clock) is
+ * to change the PWM clock prescaler.
+ *
+ * The prescaler is of 8 bits, so 256 prescaler values and hence 256 possible
+ * period values are supported (for a particular clock rate). The requested
+ * period will be applied only if it matches one of these 256 values.
+ */
+static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			  int duty_ns, int period_ns)
+{
+	struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
+	struct sti_pwm_compat_data *cdata = pc->cdata;
+	unsigned int ncfg, value, prescale = 0;
+	struct pwm_device *cur = pc->cur;
+	struct device *dev = pc->dev;
+	bool period_same = false;
+	int ret;
+
+	ncfg = hweight_long(pc->configured);
+	if (ncfg)
+		period_same = (period_ns == pwm_get_period(cur));
+
+	/*
+	 * Allow configuration changes if one of the following conditions
+	 * satisfy.
+	 * 1. No devices have been configured.
+	 * 2. Only one device has been configured and the new request is for
+	 *    the same device.
+	 * 3. Only one device has been configured and the new request is for
+	 *    a new device and period of the new device is same as the current
+	 *    configured period.
+	 * 4. More than one devices are configured and period of the new
+	 *    requestis the same as the current period.
+	 */
+	if (!ncfg ||
+	    ((ncfg == 1) && (pwm->hwpwm == cur->hwpwm)) ||
+	    ((ncfg == 1) && (pwm->hwpwm != cur->hwpwm) && period_same) ||
+	    ((ncfg > 1) && period_same)) {
+		/* Enable clock before writing to PWM registers. */
+		ret = clk_enable(pc->pwm_clk);
+		if (ret)
+			return ret;
+
+		ret = clk_enable(pc->cpt_clk);
+		if (ret)
+			return ret;
+
+		if (!period_same) {
+			ret = sti_pwm_get_prescale(pc, period_ns, &prescale);
+			if (ret)
+				goto clk_dis;
+
+			value = prescale & PWM_PRESCALE_LOW_MASK;
+
+			ret = regmap_field_write(pc->prescale_low, value);
+			if (ret)
+				goto clk_dis;
+
+			value = (prescale & PWM_PRESCALE_HIGH_MASK) >> 4;
+
+			ret = regmap_field_write(pc->prescale_high, value);
+			if (ret)
+				goto clk_dis;
+		}
+
+		/*
+		 * When PWMVal == 0, PWM pulse = 1 local clock cycle.
+		 * When PWMVal == max_pwm_count,
+		 * PWM pulse = (max_pwm_count + 1) local cycles,
+		 * that is continuous pulse: signal never goes low.
+		 */
+		value = cdata->max_pwm_cnt * duty_ns / period_ns;
+
+		ret = regmap_write(pc->regmap, PWM_OUT_VAL(pwm->hwpwm), value);
+		if (ret)
+			goto clk_dis;
+
+		ret = regmap_field_write(pc->pwm_cpt_int_en, 0);
+
+		set_bit(pwm->hwpwm, &pc->configured);
+		pc->cur = pwm;
+
+		dev_dbg(dev, "prescale:%u, period:%i, duty:%i, value:%u\n",
+			prescale, period_ns, duty_ns, value);
+	} else {
+		return -EINVAL;
+	}
+
+clk_dis:
+	clk_disable(pc->pwm_clk);
+	clk_disable(pc->cpt_clk);
+	return ret;
+}
+
+static int sti_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
+	struct device *dev = pc->dev;
+	int ret = 0;
+
+	/*
+	 * Since we have a common enable for all PWM devices, do not enable if
+	 * already enabled.
+	 */
+	mutex_lock(&pc->sti_pwm_lock);
+
+	if (!pc->en_count) {
+		ret = clk_enable(pc->pwm_clk);
+		if (ret)
+			goto out;
+
+		ret = clk_enable(pc->cpt_clk);
+		if (ret)
+			goto out;
+
+		ret = regmap_field_write(pc->pwm_out_en, 1);
+		if (ret) {
+			dev_err(dev, "failed to enable PWM device %u: %d\n",
+				pwm->hwpwm, ret);
+			goto out;
+		}
+	}
+
+	pc->en_count++;
+
+out:
+	mutex_unlock(&pc->sti_pwm_lock);
+	return ret;
+}
+
+static void sti_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
+
+	mutex_lock(&pc->sti_pwm_lock);
+
+	if (--pc->en_count) {
+		mutex_unlock(&pc->sti_pwm_lock);
+		return;
+	}
+
+	regmap_field_write(pc->pwm_out_en, 0);
+
+	clk_disable(pc->pwm_clk);
+	clk_disable(pc->cpt_clk);
+
+	mutex_unlock(&pc->sti_pwm_lock);
+}
+
+static void sti_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
+
+	clear_bit(pwm->hwpwm, &pc->configured);
+}
+
+static int sti_pwm_capture(struct pwm_chip *chip, struct pwm_device *pwm,
+			   struct pwm_capture *result, unsigned long timeout)
+{
+	struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
+	struct sti_pwm_compat_data *cdata = pc->cdata;
+	struct sti_cpt_ddata *ddata = &cdata->ddata[pwm->hwpwm];
+	struct device *dev = pc->dev;
+	unsigned int effective_ticks;
+	unsigned long long high, low;
+	int ret;
+
+	if (pwm->hwpwm >= cdata->cpt_num_devs) {
+		dev_err(dev, "device %u is not valid\n", pwm->hwpwm);
+		return -EINVAL;
+	}
+
+	mutex_lock(&ddata->lock);
+	ddata->index = 0;
+
+	/* Prepare capture measurement */
+	regmap_write(pc->regmap, PWM_CPT_EDGE(pwm->hwpwm), CPT_EDGE_RISING);
+	regmap_field_write(pc->pwm_cpt_int_en, BIT(pwm->hwpwm));
+
+	/* Enable capture */
+	ret = regmap_field_write(pc->pwm_cpt_en, 1);
+	if (ret) {
+		dev_err(dev, "failed to enable PWM capture %u: %d\n",
+			pwm->hwpwm, ret);
+		goto out;
+	}
+
+	ret = wait_event_interruptible_timeout(ddata->wait, ddata->index > 1,
+					       msecs_to_jiffies(timeout));
+
+	regmap_write(pc->regmap, PWM_CPT_EDGE(pwm->hwpwm), CPT_EDGE_DISABLED);
+
+	if (ret == -ERESTARTSYS)
+		goto out;
+
+	switch (ddata->index) {
+	case 0:
+	case 1:
+		/*
+		 * Getting here could mean:
+		 *  - input signal is constant of less than 1 Hz
+		 *  - there is no input signal at all
+		 *
+		 * In such case the frequency is rounded down to 0
+		 */
+		result->period = 0;
+		result->duty_cycle = 0;
+
+		break;
+
+	case 2:
+		/* We have everying we need */
+		high = ddata->snapshot[1] - ddata->snapshot[0];
+		low = ddata->snapshot[2] - ddata->snapshot[1];
+
+		effective_ticks = clk_get_rate(pc->cpt_clk);
+
+		result->period = (high + low) * NSEC_PER_SEC;
+		result->period /= effective_ticks;
+
+		result->duty_cycle = high * NSEC_PER_SEC;
+		result->duty_cycle /= effective_ticks;
+
+		break;
+
+	default:
+		dev_err(dev, "internal error\n");
+		break;
+	}
+
+out:
+	/* Disable capture */
+	regmap_field_write(pc->pwm_cpt_en, 0);
+
+	mutex_unlock(&ddata->lock);
+	return ret;
+}
+
+static int sti_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			 const struct pwm_state *state)
+{
+	int err;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		if (pwm->state.enabled)
+			sti_pwm_disable(chip, pwm);
+
+		return 0;
+	}
+
+	err = sti_pwm_config(pwm->chip, pwm, state->duty_cycle, state->period);
+	if (err)
+		return err;
+
+	if (!pwm->state.enabled)
+		err = sti_pwm_enable(chip, pwm);
+
+	return err;
+}
+
+static const struct pwm_ops sti_pwm_ops = {
+	.capture = sti_pwm_capture,
+	.apply = sti_pwm_apply,
+	.free = sti_pwm_free,
+	.owner = THIS_MODULE,
+};
+
+static irqreturn_t sti_pwm_interrupt(int irq, void *data)
+{
+	struct sti_pwm_chip *pc = data;
+	struct device *dev = pc->dev;
+	struct sti_cpt_ddata *ddata;
+	int devicenum;
+	unsigned int cpt_int_stat;
+	unsigned int reg;
+	int ret = IRQ_NONE;
+
+	ret = regmap_field_read(pc->pwm_cpt_int_stat, &cpt_int_stat);
+	if (ret)
+		return ret;
+
+	while (cpt_int_stat) {
+		devicenum = ffs(cpt_int_stat) - 1;
+
+		ddata = &pc->cdata->ddata[devicenum];
+
+		/*
+		 * Capture input:
+		 *    _______                   _______
+		 *   |       |                 |       |
+		 * __|       |_________________|       |________
+		 *   ^0      ^1                ^2
+		 *
+		 * Capture start by the first available rising edge. When a
+		 * capture event occurs, capture value (CPT_VALx) is stored,
+		 * index incremented, capture edge changed.
+		 *
+		 * After the capture, if the index > 1, we have collected the
+		 * necessary data so we signal the thread waiting for it and
+		 * disable the capture by setting capture edge to none
+		 */
+
+		regmap_read(pc->regmap,
+			    PWM_CPT_VAL(devicenum),
+			    &ddata->snapshot[ddata->index]);
+
+		switch (ddata->index) {
+		case 0:
+		case 1:
+			regmap_read(pc->regmap, PWM_CPT_EDGE(devicenum), &reg);
+			reg ^= PWM_CPT_EDGE_MASK;
+			regmap_write(pc->regmap, PWM_CPT_EDGE(devicenum), reg);
+
+			ddata->index++;
+			break;
+
+		case 2:
+			regmap_write(pc->regmap,
+				     PWM_CPT_EDGE(devicenum),
+				     CPT_EDGE_DISABLED);
+			wake_up(&ddata->wait);
+			break;
+
+		default:
+			dev_err(dev, "Internal error\n");
+		}
+
+		cpt_int_stat &= ~BIT_MASK(devicenum);
+
+		ret = IRQ_HANDLED;
+	}
+
+	/* Just ACK everything */
+	regmap_write(pc->regmap, PWM_INT_ACK, PWM_INT_ACK_MASK);
+
+	return ret;
+}
+
+static int sti_pwm_probe_dt(struct sti_pwm_chip *pc)
+{
+	struct device *dev = pc->dev;
+	const struct reg_field *reg_fields;
+	struct device_node *np = dev->of_node;
+	struct sti_pwm_compat_data *cdata = pc->cdata;
+	u32 num_devs;
+	int ret;
+
+	ret = of_property_read_u32(np, "st,pwm-num-chan", &num_devs);
+	if (!ret)
+		cdata->pwm_num_devs = num_devs;
+
+	ret = of_property_read_u32(np, "st,capture-num-chan", &num_devs);
+	if (!ret)
+		cdata->cpt_num_devs = num_devs;
+
+	if (!cdata->pwm_num_devs && !cdata->cpt_num_devs) {
+		dev_err(dev, "No channels configured\n");
+		return -EINVAL;
+	}
+
+	reg_fields = cdata->reg_fields;
+
+	pc->prescale_low = devm_regmap_field_alloc(dev, pc->regmap,
+					reg_fields[PWMCLK_PRESCALE_LOW]);
+	if (IS_ERR(pc->prescale_low))
+		return PTR_ERR(pc->prescale_low);
+
+	pc->prescale_high = devm_regmap_field_alloc(dev, pc->regmap,
+					reg_fields[PWMCLK_PRESCALE_HIGH]);
+	if (IS_ERR(pc->prescale_high))
+		return PTR_ERR(pc->prescale_high);
+
+	pc->pwm_out_en = devm_regmap_field_alloc(dev, pc->regmap,
+						 reg_fields[PWM_OUT_EN]);
+	if (IS_ERR(pc->pwm_out_en))
+		return PTR_ERR(pc->pwm_out_en);
+
+	pc->pwm_cpt_en = devm_regmap_field_alloc(dev, pc->regmap,
+						 reg_fields[PWM_CPT_EN]);
+	if (IS_ERR(pc->pwm_cpt_en))
+		return PTR_ERR(pc->pwm_cpt_en);
+
+	pc->pwm_cpt_int_en = devm_regmap_field_alloc(dev, pc->regmap,
+						reg_fields[PWM_CPT_INT_EN]);
+	if (IS_ERR(pc->pwm_cpt_int_en))
+		return PTR_ERR(pc->pwm_cpt_int_en);
+
+	pc->pwm_cpt_int_stat = devm_regmap_field_alloc(dev, pc->regmap,
+						reg_fields[PWM_CPT_INT_STAT]);
+	if (PTR_ERR_OR_ZERO(pc->pwm_cpt_int_stat))
+		return PTR_ERR(pc->pwm_cpt_int_stat);
+
+	return 0;
+}
+
+static const struct regmap_config sti_pwm_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+static int sti_pwm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct sti_pwm_compat_data *cdata;
+	struct sti_pwm_chip *pc;
+	unsigned int i;
+	int irq, ret;
+
+	pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
+	if (!pc)
+		return -ENOMEM;
+
+	cdata = devm_kzalloc(dev, sizeof(*cdata), GFP_KERNEL);
+	if (!cdata)
+		return -ENOMEM;
+
+	pc->mmio = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(pc->mmio))
+		return PTR_ERR(pc->mmio);
+
+	pc->regmap = devm_regmap_init_mmio(dev, pc->mmio,
+					   &sti_pwm_regmap_config);
+	if (IS_ERR(pc->regmap))
+		return PTR_ERR(pc->regmap);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ret = devm_request_irq(&pdev->dev, irq, sti_pwm_interrupt, 0,
+			       pdev->name, pc);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to request IRQ\n");
+		return ret;
+	}
+
+	/*
+	 * Setup PWM data with default values: some values could be replaced
+	 * with specific ones provided from Device Tree.
+	 */
+	cdata->reg_fields = sti_pwm_regfields;
+	cdata->max_prescale = 0xff;
+	cdata->max_pwm_cnt = 255;
+	cdata->pwm_num_devs = 0;
+	cdata->cpt_num_devs = 0;
+
+	pc->cdata = cdata;
+	pc->dev = dev;
+	pc->en_count = 0;
+	mutex_init(&pc->sti_pwm_lock);
+
+	ret = sti_pwm_probe_dt(pc);
+	if (ret)
+		return ret;
+
+	if (cdata->pwm_num_devs) {
+		pc->pwm_clk = of_clk_get_by_name(dev->of_node, "pwm");
+		if (IS_ERR(pc->pwm_clk)) {
+			dev_err(dev, "failed to get PWM clock\n");
+			return PTR_ERR(pc->pwm_clk);
+		}
+
+		ret = clk_prepare(pc->pwm_clk);
+		if (ret) {
+			dev_err(dev, "failed to prepare clock\n");
+			return ret;
+		}
+	}
+
+	if (cdata->cpt_num_devs) {
+		pc->cpt_clk = of_clk_get_by_name(dev->of_node, "capture");
+		if (IS_ERR(pc->cpt_clk)) {
+			dev_err(dev, "failed to get PWM capture clock\n");
+			return PTR_ERR(pc->cpt_clk);
+		}
+
+		ret = clk_prepare(pc->cpt_clk);
+		if (ret) {
+			dev_err(dev, "failed to prepare clock\n");
+			return ret;
+		}
+
+		cdata->ddata = devm_kzalloc(dev, cdata->cpt_num_devs * sizeof(*cdata->ddata), GFP_KERNEL);
+		if (!cdata->ddata)
+			return -ENOMEM;
+	}
+
+	pc->chip.dev = dev;
+	pc->chip.ops = &sti_pwm_ops;
+	pc->chip.npwm = pc->cdata->pwm_num_devs;
+
+	for (i = 0; i < cdata->cpt_num_devs; i++) {
+		struct sti_cpt_ddata *ddata = &cdata->ddata[i];
+
+		init_waitqueue_head(&ddata->wait);
+		mutex_init(&ddata->lock);
+	}
+
+	ret = pwmchip_add(&pc->chip);
+	if (ret < 0) {
+		clk_unprepare(pc->pwm_clk);
+		clk_unprepare(pc->cpt_clk);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, pc);
+
+	return 0;
+}
+
+static int sti_pwm_remove(struct platform_device *pdev)
+{
+	struct sti_pwm_chip *pc = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&pc->chip);
+
+	clk_unprepare(pc->pwm_clk);
+	clk_unprepare(pc->cpt_clk);
+
+	return 0;
+}
+
+static const struct of_device_id sti_pwm_of_match[] = {
+	{ .compatible = "st,sti-pwm", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sti_pwm_of_match);
+
+static struct platform_driver sti_pwm_driver = {
+	.driver = {
+		.name = "sti-pwm",
+		.of_match_table = sti_pwm_of_match,
+	},
+	.probe = sti_pwm_probe,
+	.remove = sti_pwm_remove,
+};
+module_platform_driver(sti_pwm_driver);
+
+MODULE_AUTHOR("Ajit Pal Singh <ajitpal.singh@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics ST PWM driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-stm32-lp.c b/drivers/pwm/pwm-stm32-lp.c
new file mode 100644
index 000000000..31a185c6b
--- /dev/null
+++ b/drivers/pwm/pwm-stm32-lp.c
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * STM32 Low-Power Timer PWM driver
+ *
+ * Copyright (C) STMicroelectronics 2017
+ *
+ * Author: Gerald Baeza <gerald.baeza@st.com>
+ *
+ * Inspired by Gerald Baeza's pwm-stm32 driver
+ */
+
+#include <linux/bitfield.h>
+#include <linux/mfd/stm32-lptimer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+struct stm32_pwm_lp {
+	struct pwm_chip chip;
+	struct clk *clk;
+	struct regmap *regmap;
+};
+
+static inline struct stm32_pwm_lp *to_stm32_pwm_lp(struct pwm_chip *chip)
+{
+	return container_of(chip, struct stm32_pwm_lp, chip);
+}
+
+/* STM32 Low-Power Timer is preceded by a configurable power-of-2 prescaler */
+#define STM32_LPTIM_MAX_PRESCALER	128
+
+static int stm32_pwm_lp_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			      const struct pwm_state *state)
+{
+	struct stm32_pwm_lp *priv = to_stm32_pwm_lp(chip);
+	unsigned long long prd, div, dty;
+	struct pwm_state cstate;
+	u32 val, mask, cfgr, presc = 0;
+	bool reenable;
+	int ret;
+
+	pwm_get_state(pwm, &cstate);
+	reenable = !cstate.enabled;
+
+	if (!state->enabled) {
+		if (cstate.enabled) {
+			/* Disable LP timer */
+			ret = regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
+			if (ret)
+				return ret;
+			/* disable clock to PWM counter */
+			clk_disable(priv->clk);
+		}
+		return 0;
+	}
+
+	/* Calculate the period and prescaler value */
+	div = (unsigned long long)clk_get_rate(priv->clk) * state->period;
+	do_div(div, NSEC_PER_SEC);
+	if (!div) {
+		/* Clock is too slow to achieve requested period. */
+		dev_dbg(priv->chip.dev, "Can't reach %llu ns\n", state->period);
+		return -EINVAL;
+	}
+
+	prd = div;
+	while (div > STM32_LPTIM_MAX_ARR) {
+		presc++;
+		if ((1 << presc) > STM32_LPTIM_MAX_PRESCALER) {
+			dev_err(priv->chip.dev, "max prescaler exceeded\n");
+			return -EINVAL;
+		}
+		div = prd >> presc;
+	}
+	prd = div;
+
+	/* Calculate the duty cycle */
+	dty = prd * state->duty_cycle;
+	do_div(dty, state->period);
+
+	if (!cstate.enabled) {
+		/* enable clock to drive PWM counter */
+		ret = clk_enable(priv->clk);
+		if (ret)
+			return ret;
+	}
+
+	ret = regmap_read(priv->regmap, STM32_LPTIM_CFGR, &cfgr);
+	if (ret)
+		goto err;
+
+	if ((FIELD_GET(STM32_LPTIM_PRESC, cfgr) != presc) ||
+	    (FIELD_GET(STM32_LPTIM_WAVPOL, cfgr) != state->polarity)) {
+		val = FIELD_PREP(STM32_LPTIM_PRESC, presc);
+		val |= FIELD_PREP(STM32_LPTIM_WAVPOL, state->polarity);
+		mask = STM32_LPTIM_PRESC | STM32_LPTIM_WAVPOL;
+
+		/* Must disable LP timer to modify CFGR */
+		reenable = true;
+		ret = regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
+		if (ret)
+			goto err;
+
+		ret = regmap_update_bits(priv->regmap, STM32_LPTIM_CFGR, mask,
+					 val);
+		if (ret)
+			goto err;
+	}
+
+	if (reenable) {
+		/* Must (re)enable LP timer to modify CMP & ARR */
+		ret = regmap_write(priv->regmap, STM32_LPTIM_CR,
+				   STM32_LPTIM_ENABLE);
+		if (ret)
+			goto err;
+	}
+
+	ret = regmap_write(priv->regmap, STM32_LPTIM_ARR, prd - 1);
+	if (ret)
+		goto err;
+
+	ret = regmap_write(priv->regmap, STM32_LPTIM_CMP, prd - (1 + dty));
+	if (ret)
+		goto err;
+
+	/* ensure CMP & ARR registers are properly written */
+	ret = regmap_read_poll_timeout(priv->regmap, STM32_LPTIM_ISR, val,
+				       (val & STM32_LPTIM_CMPOK_ARROK) == STM32_LPTIM_CMPOK_ARROK,
+				       100, 1000);
+	if (ret) {
+		dev_err(priv->chip.dev, "ARR/CMP registers write issue\n");
+		goto err;
+	}
+	ret = regmap_write(priv->regmap, STM32_LPTIM_ICR,
+			   STM32_LPTIM_CMPOKCF_ARROKCF);
+	if (ret)
+		goto err;
+
+	if (reenable) {
+		/* Start LP timer in continuous mode */
+		ret = regmap_update_bits(priv->regmap, STM32_LPTIM_CR,
+					 STM32_LPTIM_CNTSTRT,
+					 STM32_LPTIM_CNTSTRT);
+		if (ret) {
+			regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
+			goto err;
+		}
+	}
+
+	return 0;
+err:
+	if (!cstate.enabled)
+		clk_disable(priv->clk);
+
+	return ret;
+}
+
+static int stm32_pwm_lp_get_state(struct pwm_chip *chip,
+				  struct pwm_device *pwm,
+				  struct pwm_state *state)
+{
+	struct stm32_pwm_lp *priv = to_stm32_pwm_lp(chip);
+	unsigned long rate = clk_get_rate(priv->clk);
+	u32 val, presc, prd;
+	u64 tmp;
+
+	regmap_read(priv->regmap, STM32_LPTIM_CR, &val);
+	state->enabled = !!FIELD_GET(STM32_LPTIM_ENABLE, val);
+	/* Keep PWM counter clock refcount in sync with PWM initial state */
+	if (state->enabled)
+		clk_enable(priv->clk);
+
+	regmap_read(priv->regmap, STM32_LPTIM_CFGR, &val);
+	presc = FIELD_GET(STM32_LPTIM_PRESC, val);
+	state->polarity = FIELD_GET(STM32_LPTIM_WAVPOL, val);
+
+	regmap_read(priv->regmap, STM32_LPTIM_ARR, &prd);
+	tmp = prd + 1;
+	tmp = (tmp << presc) * NSEC_PER_SEC;
+	state->period = DIV_ROUND_CLOSEST_ULL(tmp, rate);
+
+	regmap_read(priv->regmap, STM32_LPTIM_CMP, &val);
+	tmp = prd - val;
+	tmp = (tmp << presc) * NSEC_PER_SEC;
+	state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, rate);
+
+	return 0;
+}
+
+static const struct pwm_ops stm32_pwm_lp_ops = {
+	.owner = THIS_MODULE,
+	.apply = stm32_pwm_lp_apply,
+	.get_state = stm32_pwm_lp_get_state,
+};
+
+static int stm32_pwm_lp_probe(struct platform_device *pdev)
+{
+	struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent);
+	struct stm32_pwm_lp *priv;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regmap = ddata->regmap;
+	priv->clk = ddata->clk;
+	priv->chip.dev = &pdev->dev;
+	priv->chip.ops = &stm32_pwm_lp_ops;
+	priv->chip.npwm = 1;
+
+	ret = devm_pwmchip_add(&pdev->dev, &priv->chip);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+}
+
+static int __maybe_unused stm32_pwm_lp_suspend(struct device *dev)
+{
+	struct stm32_pwm_lp *priv = dev_get_drvdata(dev);
+	struct pwm_state state;
+
+	pwm_get_state(&priv->chip.pwms[0], &state);
+	if (state.enabled) {
+		dev_err(dev, "The consumer didn't stop us (%s)\n",
+			priv->chip.pwms[0].label);
+		return -EBUSY;
+	}
+
+	return pinctrl_pm_select_sleep_state(dev);
+}
+
+static int __maybe_unused stm32_pwm_lp_resume(struct device *dev)
+{
+	return pinctrl_pm_select_default_state(dev);
+}
+
+static SIMPLE_DEV_PM_OPS(stm32_pwm_lp_pm_ops, stm32_pwm_lp_suspend,
+			 stm32_pwm_lp_resume);
+
+static const struct of_device_id stm32_pwm_lp_of_match[] = {
+	{ .compatible = "st,stm32-pwm-lp", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, stm32_pwm_lp_of_match);
+
+static struct platform_driver stm32_pwm_lp_driver = {
+	.probe	= stm32_pwm_lp_probe,
+	.driver	= {
+		.name = "stm32-pwm-lp",
+		.of_match_table = of_match_ptr(stm32_pwm_lp_of_match),
+		.pm = &stm32_pwm_lp_pm_ops,
+	},
+};
+module_platform_driver(stm32_pwm_lp_driver);
+
+MODULE_ALIAS("platform:stm32-pwm-lp");
+MODULE_DESCRIPTION("STMicroelectronics STM32 PWM LP driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-stm32.c b/drivers/pwm/pwm-stm32.c
new file mode 100644
index 000000000..bdcdb7f38
--- /dev/null
+++ b/drivers/pwm/pwm-stm32.c
@@ -0,0 +1,710 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) STMicroelectronics 2016
+ *
+ * Author: Gerald Baeza <gerald.baeza@st.com>
+ *
+ * Inspired by timer-stm32.c from Maxime Coquelin
+ *             pwm-atmel.c from Bo Shen
+ */
+
+#include <linux/bitfield.h>
+#include <linux/mfd/stm32-timers.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+#define CCMR_CHANNEL_SHIFT 8
+#define CCMR_CHANNEL_MASK  0xFF
+#define MAX_BREAKINPUT 2
+
+struct stm32_breakinput {
+	u32 index;
+	u32 level;
+	u32 filter;
+};
+
+struct stm32_pwm {
+	struct pwm_chip chip;
+	struct mutex lock; /* protect pwm config/enable */
+	struct clk *clk;
+	struct regmap *regmap;
+	u32 max_arr;
+	bool have_complementary_output;
+	struct stm32_breakinput breakinputs[MAX_BREAKINPUT];
+	unsigned int num_breakinputs;
+	u32 capture[4] ____cacheline_aligned; /* DMA'able buffer */
+};
+
+static inline struct stm32_pwm *to_stm32_pwm_dev(struct pwm_chip *chip)
+{
+	return container_of(chip, struct stm32_pwm, chip);
+}
+
+static u32 active_channels(struct stm32_pwm *dev)
+{
+	u32 ccer;
+
+	regmap_read(dev->regmap, TIM_CCER, &ccer);
+
+	return ccer & TIM_CCER_CCXE;
+}
+
+static int write_ccrx(struct stm32_pwm *dev, int ch, u32 value)
+{
+	switch (ch) {
+	case 0:
+		return regmap_write(dev->regmap, TIM_CCR1, value);
+	case 1:
+		return regmap_write(dev->regmap, TIM_CCR2, value);
+	case 2:
+		return regmap_write(dev->regmap, TIM_CCR3, value);
+	case 3:
+		return regmap_write(dev->regmap, TIM_CCR4, value);
+	}
+	return -EINVAL;
+}
+
+#define TIM_CCER_CC12P (TIM_CCER_CC1P | TIM_CCER_CC2P)
+#define TIM_CCER_CC12E (TIM_CCER_CC1E | TIM_CCER_CC2E)
+#define TIM_CCER_CC34P (TIM_CCER_CC3P | TIM_CCER_CC4P)
+#define TIM_CCER_CC34E (TIM_CCER_CC3E | TIM_CCER_CC4E)
+
+/*
+ * Capture using PWM input mode:
+ *                              ___          ___
+ * TI[1, 2, 3 or 4]: ........._|   |________|
+ *                             ^0  ^1       ^2
+ *                              .   .        .
+ *                              .   .        XXXXX
+ *                              .   .   XXXXX     |
+ *                              .  XXXXX     .    |
+ *                            XXXXX .        .    |
+ * COUNTER:        ______XXXXX  .   .        .    |_XXX
+ *                 start^       .   .        .        ^stop
+ *                      .       .   .        .
+ *                      v       v   .        v
+ *                                  v
+ * CCR1/CCR3:       tx..........t0...........t2
+ * CCR2/CCR4:       tx..............t1.........
+ *
+ * DMA burst transfer:          |            |
+ *                              v            v
+ * DMA buffer:                  { t0, tx }   { t2, t1 }
+ * DMA done:                                 ^
+ *
+ * 0: IC1/3 snapchot on rising edge: counter value -> CCR1/CCR3
+ *    + DMA transfer CCR[1/3] & CCR[2/4] values (t0, tx: doesn't care)
+ * 1: IC2/4 snapchot on falling edge: counter value -> CCR2/CCR4
+ * 2: IC1/3 snapchot on rising edge: counter value -> CCR1/CCR3
+ *    + DMA transfer CCR[1/3] & CCR[2/4] values (t2, t1)
+ *
+ * DMA done, compute:
+ * - Period     = t2 - t0
+ * - Duty cycle = t1 - t0
+ */
+static int stm32_pwm_raw_capture(struct stm32_pwm *priv, struct pwm_device *pwm,
+				 unsigned long tmo_ms, u32 *raw_prd,
+				 u32 *raw_dty)
+{
+	struct device *parent = priv->chip.dev->parent;
+	enum stm32_timers_dmas dma_id;
+	u32 ccen, ccr;
+	int ret;
+
+	/* Ensure registers have been updated, enable counter and capture */
+	regmap_set_bits(priv->regmap, TIM_EGR, TIM_EGR_UG);
+	regmap_set_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN);
+
+	/* Use cc1 or cc3 DMA resp for PWM input channels 1 & 2 or 3 & 4 */
+	dma_id = pwm->hwpwm < 2 ? STM32_TIMERS_DMA_CH1 : STM32_TIMERS_DMA_CH3;
+	ccen = pwm->hwpwm < 2 ? TIM_CCER_CC12E : TIM_CCER_CC34E;
+	ccr = pwm->hwpwm < 2 ? TIM_CCR1 : TIM_CCR3;
+	regmap_set_bits(priv->regmap, TIM_CCER, ccen);
+
+	/*
+	 * Timer DMA burst mode. Request 2 registers, 2 bursts, to get both
+	 * CCR1 & CCR2 (or CCR3 & CCR4) on each capture event.
+	 * We'll get two capture snapchots: { CCR1, CCR2 }, { CCR1, CCR2 }
+	 * or { CCR3, CCR4 }, { CCR3, CCR4 }
+	 */
+	ret = stm32_timers_dma_burst_read(parent, priv->capture, dma_id, ccr, 2,
+					  2, tmo_ms);
+	if (ret)
+		goto stop;
+
+	/* Period: t2 - t0 (take care of counter overflow) */
+	if (priv->capture[0] <= priv->capture[2])
+		*raw_prd = priv->capture[2] - priv->capture[0];
+	else
+		*raw_prd = priv->max_arr - priv->capture[0] + priv->capture[2];
+
+	/* Duty cycle capture requires at least two capture units */
+	if (pwm->chip->npwm < 2)
+		*raw_dty = 0;
+	else if (priv->capture[0] <= priv->capture[3])
+		*raw_dty = priv->capture[3] - priv->capture[0];
+	else
+		*raw_dty = priv->max_arr - priv->capture[0] + priv->capture[3];
+
+	if (*raw_dty > *raw_prd) {
+		/*
+		 * Race beetween PWM input and DMA: it may happen
+		 * falling edge triggers new capture on TI2/4 before DMA
+		 * had a chance to read CCR2/4. It means capture[1]
+		 * contains period + duty_cycle. So, subtract period.
+		 */
+		*raw_dty -= *raw_prd;
+	}
+
+stop:
+	regmap_clear_bits(priv->regmap, TIM_CCER, ccen);
+	regmap_clear_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN);
+
+	return ret;
+}
+
+static int stm32_pwm_capture(struct pwm_chip *chip, struct pwm_device *pwm,
+			     struct pwm_capture *result, unsigned long tmo_ms)
+{
+	struct stm32_pwm *priv = to_stm32_pwm_dev(chip);
+	unsigned long long prd, div, dty;
+	unsigned long rate;
+	unsigned int psc = 0, icpsc, scale;
+	u32 raw_prd = 0, raw_dty = 0;
+	int ret = 0;
+
+	mutex_lock(&priv->lock);
+
+	if (active_channels(priv)) {
+		ret = -EBUSY;
+		goto unlock;
+	}
+
+	ret = clk_enable(priv->clk);
+	if (ret) {
+		dev_err(priv->chip.dev, "failed to enable counter clock\n");
+		goto unlock;
+	}
+
+	rate = clk_get_rate(priv->clk);
+	if (!rate) {
+		ret = -EINVAL;
+		goto clk_dis;
+	}
+
+	/* prescaler: fit timeout window provided by upper layer */
+	div = (unsigned long long)rate * (unsigned long long)tmo_ms;
+	do_div(div, MSEC_PER_SEC);
+	prd = div;
+	while ((div > priv->max_arr) && (psc < MAX_TIM_PSC)) {
+		psc++;
+		div = prd;
+		do_div(div, psc + 1);
+	}
+	regmap_write(priv->regmap, TIM_ARR, priv->max_arr);
+	regmap_write(priv->regmap, TIM_PSC, psc);
+
+	/* Map TI1 or TI2 PWM input to IC1 & IC2 (or TI3/4 to IC3 & IC4) */
+	regmap_update_bits(priv->regmap,
+			   pwm->hwpwm < 2 ? TIM_CCMR1 : TIM_CCMR2,
+			   TIM_CCMR_CC1S | TIM_CCMR_CC2S, pwm->hwpwm & 0x1 ?
+			   TIM_CCMR_CC1S_TI2 | TIM_CCMR_CC2S_TI2 :
+			   TIM_CCMR_CC1S_TI1 | TIM_CCMR_CC2S_TI1);
+
+	/* Capture period on IC1/3 rising edge, duty cycle on IC2/4 falling. */
+	regmap_update_bits(priv->regmap, TIM_CCER, pwm->hwpwm < 2 ?
+			   TIM_CCER_CC12P : TIM_CCER_CC34P, pwm->hwpwm < 2 ?
+			   TIM_CCER_CC2P : TIM_CCER_CC4P);
+
+	ret = stm32_pwm_raw_capture(priv, pwm, tmo_ms, &raw_prd, &raw_dty);
+	if (ret)
+		goto stop;
+
+	/*
+	 * Got a capture. Try to improve accuracy at high rates:
+	 * - decrease counter clock prescaler, scale up to max rate.
+	 * - use input prescaler, capture once every /2 /4 or /8 edges.
+	 */
+	if (raw_prd) {
+		u32 max_arr = priv->max_arr - 0x1000; /* arbitrary margin */
+
+		scale = max_arr / min(max_arr, raw_prd);
+	} else {
+		scale = priv->max_arr; /* bellow resolution, use max scale */
+	}
+
+	if (psc && scale > 1) {
+		/* 2nd measure with new scale */
+		psc /= scale;
+		regmap_write(priv->regmap, TIM_PSC, psc);
+		ret = stm32_pwm_raw_capture(priv, pwm, tmo_ms, &raw_prd,
+					    &raw_dty);
+		if (ret)
+			goto stop;
+	}
+
+	/* Compute intermediate period not to exceed timeout at low rates */
+	prd = (unsigned long long)raw_prd * (psc + 1) * NSEC_PER_SEC;
+	do_div(prd, rate);
+
+	for (icpsc = 0; icpsc < MAX_TIM_ICPSC ; icpsc++) {
+		/* input prescaler: also keep arbitrary margin */
+		if (raw_prd >= (priv->max_arr - 0x1000) >> (icpsc + 1))
+			break;
+		if (prd >= (tmo_ms * NSEC_PER_MSEC) >> (icpsc + 2))
+			break;
+	}
+
+	if (!icpsc)
+		goto done;
+
+	/* Last chance to improve period accuracy, using input prescaler */
+	regmap_update_bits(priv->regmap,
+			   pwm->hwpwm < 2 ? TIM_CCMR1 : TIM_CCMR2,
+			   TIM_CCMR_IC1PSC | TIM_CCMR_IC2PSC,
+			   FIELD_PREP(TIM_CCMR_IC1PSC, icpsc) |
+			   FIELD_PREP(TIM_CCMR_IC2PSC, icpsc));
+
+	ret = stm32_pwm_raw_capture(priv, pwm, tmo_ms, &raw_prd, &raw_dty);
+	if (ret)
+		goto stop;
+
+	if (raw_dty >= (raw_prd >> icpsc)) {
+		/*
+		 * We may fall here using input prescaler, when input
+		 * capture starts on high side (before falling edge).
+		 * Example with icpsc to capture on each 4 events:
+		 *
+		 *       start   1st capture                     2nd capture
+		 *         v     v                               v
+		 *         ___   _____   _____   _____   _____   ____
+		 * TI1..4     |__|    |__|    |__|    |__|    |__|
+		 *            v  v    .  .    .  .    .       v  v
+		 * icpsc1/3:  .  0    .  1    .  2    .  3    .  0
+		 * icpsc2/4:  0       1       2       3       0
+		 *            v  v                            v  v
+		 * CCR1/3  ......t0..............................t2
+		 * CCR2/4  ..t1..............................t1'...
+		 *               .                            .  .
+		 * Capture0:     .<----------------------------->.
+		 * Capture1:     .<-------------------------->.  .
+		 *               .                            .  .
+		 * Period:       .<------>                    .  .
+		 * Low side:                                  .<>.
+		 *
+		 * Result:
+		 * - Period = Capture0 / icpsc
+		 * - Duty = Period - Low side = Period - (Capture0 - Capture1)
+		 */
+		raw_dty = (raw_prd >> icpsc) - (raw_prd - raw_dty);
+	}
+
+done:
+	prd = (unsigned long long)raw_prd * (psc + 1) * NSEC_PER_SEC;
+	result->period = DIV_ROUND_UP_ULL(prd, rate << icpsc);
+	dty = (unsigned long long)raw_dty * (psc + 1) * NSEC_PER_SEC;
+	result->duty_cycle = DIV_ROUND_UP_ULL(dty, rate);
+stop:
+	regmap_write(priv->regmap, TIM_CCER, 0);
+	regmap_write(priv->regmap, pwm->hwpwm < 2 ? TIM_CCMR1 : TIM_CCMR2, 0);
+	regmap_write(priv->regmap, TIM_PSC, 0);
+clk_dis:
+	clk_disable(priv->clk);
+unlock:
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static int stm32_pwm_config(struct stm32_pwm *priv, int ch,
+			    int duty_ns, int period_ns)
+{
+	unsigned long long prd, div, dty;
+	unsigned int prescaler = 0;
+	u32 ccmr, mask, shift;
+
+	/* Period and prescaler values depends on clock rate */
+	div = (unsigned long long)clk_get_rate(priv->clk) * period_ns;
+
+	do_div(div, NSEC_PER_SEC);
+	prd = div;
+
+	while (div > priv->max_arr) {
+		prescaler++;
+		div = prd;
+		do_div(div, prescaler + 1);
+	}
+
+	prd = div;
+
+	if (prescaler > MAX_TIM_PSC)
+		return -EINVAL;
+
+	/*
+	 * All channels share the same prescaler and counter so when two
+	 * channels are active at the same time we can't change them
+	 */
+	if (active_channels(priv) & ~(1 << ch * 4)) {
+		u32 psc, arr;
+
+		regmap_read(priv->regmap, TIM_PSC, &psc);
+		regmap_read(priv->regmap, TIM_ARR, &arr);
+
+		if ((psc != prescaler) || (arr != prd - 1))
+			return -EBUSY;
+	}
+
+	regmap_write(priv->regmap, TIM_PSC, prescaler);
+	regmap_write(priv->regmap, TIM_ARR, prd - 1);
+	regmap_set_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE);
+
+	/* Calculate the duty cycles */
+	dty = prd * duty_ns;
+	do_div(dty, period_ns);
+
+	write_ccrx(priv, ch, dty);
+
+	/* Configure output mode */
+	shift = (ch & 0x1) * CCMR_CHANNEL_SHIFT;
+	ccmr = (TIM_CCMR_PE | TIM_CCMR_M1) << shift;
+	mask = CCMR_CHANNEL_MASK << shift;
+
+	if (ch < 2)
+		regmap_update_bits(priv->regmap, TIM_CCMR1, mask, ccmr);
+	else
+		regmap_update_bits(priv->regmap, TIM_CCMR2, mask, ccmr);
+
+	regmap_set_bits(priv->regmap, TIM_BDTR, TIM_BDTR_MOE);
+
+	return 0;
+}
+
+static int stm32_pwm_set_polarity(struct stm32_pwm *priv, int ch,
+				  enum pwm_polarity polarity)
+{
+	u32 mask;
+
+	mask = TIM_CCER_CC1P << (ch * 4);
+	if (priv->have_complementary_output)
+		mask |= TIM_CCER_CC1NP << (ch * 4);
+
+	regmap_update_bits(priv->regmap, TIM_CCER, mask,
+			   polarity == PWM_POLARITY_NORMAL ? 0 : mask);
+
+	return 0;
+}
+
+static int stm32_pwm_enable(struct stm32_pwm *priv, int ch)
+{
+	u32 mask;
+	int ret;
+
+	ret = clk_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	/* Enable channel */
+	mask = TIM_CCER_CC1E << (ch * 4);
+	if (priv->have_complementary_output)
+		mask |= TIM_CCER_CC1NE << (ch * 4);
+
+	regmap_set_bits(priv->regmap, TIM_CCER, mask);
+
+	/* Make sure that registers are updated */
+	regmap_set_bits(priv->regmap, TIM_EGR, TIM_EGR_UG);
+
+	/* Enable controller */
+	regmap_set_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN);
+
+	return 0;
+}
+
+static void stm32_pwm_disable(struct stm32_pwm *priv, int ch)
+{
+	u32 mask;
+
+	/* Disable channel */
+	mask = TIM_CCER_CC1E << (ch * 4);
+	if (priv->have_complementary_output)
+		mask |= TIM_CCER_CC1NE << (ch * 4);
+
+	regmap_clear_bits(priv->regmap, TIM_CCER, mask);
+
+	/* When all channels are disabled, we can disable the controller */
+	if (!active_channels(priv))
+		regmap_clear_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN);
+
+	clk_disable(priv->clk);
+}
+
+static int stm32_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			   const struct pwm_state *state)
+{
+	bool enabled;
+	struct stm32_pwm *priv = to_stm32_pwm_dev(chip);
+	int ret;
+
+	enabled = pwm->state.enabled;
+
+	if (enabled && !state->enabled) {
+		stm32_pwm_disable(priv, pwm->hwpwm);
+		return 0;
+	}
+
+	if (state->polarity != pwm->state.polarity)
+		stm32_pwm_set_polarity(priv, pwm->hwpwm, state->polarity);
+
+	ret = stm32_pwm_config(priv, pwm->hwpwm,
+			       state->duty_cycle, state->period);
+	if (ret)
+		return ret;
+
+	if (!enabled && state->enabled)
+		ret = stm32_pwm_enable(priv, pwm->hwpwm);
+
+	return ret;
+}
+
+static int stm32_pwm_apply_locked(struct pwm_chip *chip, struct pwm_device *pwm,
+				  const struct pwm_state *state)
+{
+	struct stm32_pwm *priv = to_stm32_pwm_dev(chip);
+	int ret;
+
+	/* protect common prescaler for all active channels */
+	mutex_lock(&priv->lock);
+	ret = stm32_pwm_apply(chip, pwm, state);
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static const struct pwm_ops stm32pwm_ops = {
+	.owner = THIS_MODULE,
+	.apply = stm32_pwm_apply_locked,
+	.capture = IS_ENABLED(CONFIG_DMA_ENGINE) ? stm32_pwm_capture : NULL,
+};
+
+static int stm32_pwm_set_breakinput(struct stm32_pwm *priv,
+				    const struct stm32_breakinput *bi)
+{
+	u32 shift = TIM_BDTR_BKF_SHIFT(bi->index);
+	u32 bke = TIM_BDTR_BKE(bi->index);
+	u32 bkp = TIM_BDTR_BKP(bi->index);
+	u32 bkf = TIM_BDTR_BKF(bi->index);
+	u32 mask = bkf | bkp | bke;
+	u32 bdtr;
+
+	bdtr = (bi->filter & TIM_BDTR_BKF_MASK) << shift | bke;
+
+	if (bi->level)
+		bdtr |= bkp;
+
+	regmap_update_bits(priv->regmap, TIM_BDTR, mask, bdtr);
+
+	regmap_read(priv->regmap, TIM_BDTR, &bdtr);
+
+	return (bdtr & bke) ? 0 : -EINVAL;
+}
+
+static int stm32_pwm_apply_breakinputs(struct stm32_pwm *priv)
+{
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < priv->num_breakinputs; i++) {
+		ret = stm32_pwm_set_breakinput(priv, &priv->breakinputs[i]);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int stm32_pwm_probe_breakinputs(struct stm32_pwm *priv,
+				       struct device_node *np)
+{
+	int nb, ret, array_size;
+	unsigned int i;
+
+	nb = of_property_count_elems_of_size(np, "st,breakinput",
+					     sizeof(struct stm32_breakinput));
+
+	/*
+	 * Because "st,breakinput" parameter is optional do not make probe
+	 * failed if it doesn't exist.
+	 */
+	if (nb <= 0)
+		return 0;
+
+	if (nb > MAX_BREAKINPUT)
+		return -EINVAL;
+
+	priv->num_breakinputs = nb;
+	array_size = nb * sizeof(struct stm32_breakinput) / sizeof(u32);
+	ret = of_property_read_u32_array(np, "st,breakinput",
+					 (u32 *)priv->breakinputs, array_size);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < priv->num_breakinputs; i++) {
+		if (priv->breakinputs[i].index > 1 ||
+		    priv->breakinputs[i].level > 1 ||
+		    priv->breakinputs[i].filter > 15)
+			return -EINVAL;
+	}
+
+	return stm32_pwm_apply_breakinputs(priv);
+}
+
+static void stm32_pwm_detect_complementary(struct stm32_pwm *priv)
+{
+	u32 ccer;
+
+	/*
+	 * If complementary bit doesn't exist writing 1 will have no
+	 * effect so we can detect it.
+	 */
+	regmap_set_bits(priv->regmap, TIM_CCER, TIM_CCER_CC1NE);
+	regmap_read(priv->regmap, TIM_CCER, &ccer);
+	regmap_clear_bits(priv->regmap, TIM_CCER, TIM_CCER_CC1NE);
+
+	priv->have_complementary_output = (ccer != 0);
+}
+
+static unsigned int stm32_pwm_detect_channels(struct stm32_pwm *priv,
+					      unsigned int *num_enabled)
+{
+	u32 ccer, ccer_backup;
+
+	/*
+	 * If channels enable bits don't exist writing 1 will have no
+	 * effect so we can detect and count them.
+	 */
+	regmap_read(priv->regmap, TIM_CCER, &ccer_backup);
+	regmap_set_bits(priv->regmap, TIM_CCER, TIM_CCER_CCXE);
+	regmap_read(priv->regmap, TIM_CCER, &ccer);
+	regmap_write(priv->regmap, TIM_CCER, ccer_backup);
+
+	*num_enabled = hweight32(ccer_backup & TIM_CCER_CCXE);
+
+	return hweight32(ccer & TIM_CCER_CCXE);
+}
+
+static int stm32_pwm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct stm32_timers *ddata = dev_get_drvdata(pdev->dev.parent);
+	struct stm32_pwm *priv;
+	unsigned int num_enabled;
+	unsigned int i;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	mutex_init(&priv->lock);
+	priv->regmap = ddata->regmap;
+	priv->clk = ddata->clk;
+	priv->max_arr = ddata->max_arr;
+
+	if (!priv->regmap || !priv->clk)
+		return -EINVAL;
+
+	ret = stm32_pwm_probe_breakinputs(priv, np);
+	if (ret)
+		return ret;
+
+	stm32_pwm_detect_complementary(priv);
+
+	priv->chip.dev = dev;
+	priv->chip.ops = &stm32pwm_ops;
+	priv->chip.npwm = stm32_pwm_detect_channels(priv, &num_enabled);
+
+	/* Initialize clock refcount to number of enabled PWM channels. */
+	for (i = 0; i < num_enabled; i++)
+		clk_enable(priv->clk);
+
+	ret = pwmchip_add(&priv->chip);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+}
+
+static int stm32_pwm_remove(struct platform_device *pdev)
+{
+	struct stm32_pwm *priv = platform_get_drvdata(pdev);
+	unsigned int i;
+
+	for (i = 0; i < priv->chip.npwm; i++)
+		pwm_disable(&priv->chip.pwms[i]);
+
+	pwmchip_remove(&priv->chip);
+
+	return 0;
+}
+
+static int __maybe_unused stm32_pwm_suspend(struct device *dev)
+{
+	struct stm32_pwm *priv = dev_get_drvdata(dev);
+	unsigned int i;
+	u32 ccer, mask;
+
+	/* Look for active channels */
+	ccer = active_channels(priv);
+
+	for (i = 0; i < priv->chip.npwm; i++) {
+		mask = TIM_CCER_CC1E << (i * 4);
+		if (ccer & mask) {
+			dev_err(dev, "PWM %u still in use by consumer %s\n",
+				i, priv->chip.pwms[i].label);
+			return -EBUSY;
+		}
+	}
+
+	return pinctrl_pm_select_sleep_state(dev);
+}
+
+static int __maybe_unused stm32_pwm_resume(struct device *dev)
+{
+	struct stm32_pwm *priv = dev_get_drvdata(dev);
+	int ret;
+
+	ret = pinctrl_pm_select_default_state(dev);
+	if (ret)
+		return ret;
+
+	/* restore breakinput registers that may have been lost in low power */
+	return stm32_pwm_apply_breakinputs(priv);
+}
+
+static SIMPLE_DEV_PM_OPS(stm32_pwm_pm_ops, stm32_pwm_suspend, stm32_pwm_resume);
+
+static const struct of_device_id stm32_pwm_of_match[] = {
+	{ .compatible = "st,stm32-pwm",	},
+	{ /* end node */ },
+};
+MODULE_DEVICE_TABLE(of, stm32_pwm_of_match);
+
+static struct platform_driver stm32_pwm_driver = {
+	.probe	= stm32_pwm_probe,
+	.remove	= stm32_pwm_remove,
+	.driver	= {
+		.name = "stm32-pwm",
+		.of_match_table = stm32_pwm_of_match,
+		.pm = &stm32_pwm_pm_ops,
+	},
+};
+module_platform_driver(stm32_pwm_driver);
+
+MODULE_ALIAS("platform:stm32-pwm");
+MODULE_DESCRIPTION("STMicroelectronics STM32 PWM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-stmpe.c b/drivers/pwm/pwm-stmpe.c
new file mode 100644
index 000000000..5d4a4762c
--- /dev/null
+++ b/drivers/pwm/pwm-stmpe.c
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Linaro Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/mfd/stmpe.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+#define STMPE24XX_PWMCS		0x30
+#define PWMCS_EN_PWM0		BIT(0)
+#define PWMCS_EN_PWM1		BIT(1)
+#define PWMCS_EN_PWM2		BIT(2)
+#define STMPE24XX_PWMIC0	0x38
+#define STMPE24XX_PWMIC1	0x39
+#define STMPE24XX_PWMIC2	0x3a
+
+#define STMPE_PWM_24XX_PINBASE	21
+
+struct stmpe_pwm {
+	struct stmpe *stmpe;
+	struct pwm_chip chip;
+	u8 last_duty;
+};
+
+static inline struct stmpe_pwm *to_stmpe_pwm(struct pwm_chip *chip)
+{
+	return container_of(chip, struct stmpe_pwm, chip);
+}
+
+static int stmpe_24xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct stmpe_pwm *stmpe_pwm = to_stmpe_pwm(chip);
+	u8 value;
+	int ret;
+
+	ret = stmpe_reg_read(stmpe_pwm->stmpe, STMPE24XX_PWMCS);
+	if (ret < 0) {
+		dev_err(chip->dev, "error reading PWM#%u control\n",
+			pwm->hwpwm);
+		return ret;
+	}
+
+	value = ret | BIT(pwm->hwpwm);
+
+	ret = stmpe_reg_write(stmpe_pwm->stmpe, STMPE24XX_PWMCS, value);
+	if (ret) {
+		dev_err(chip->dev, "error writing PWM#%u control\n",
+			pwm->hwpwm);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void stmpe_24xx_pwm_disable(struct pwm_chip *chip,
+				   struct pwm_device *pwm)
+{
+	struct stmpe_pwm *stmpe_pwm = to_stmpe_pwm(chip);
+	u8 value;
+	int ret;
+
+	ret = stmpe_reg_read(stmpe_pwm->stmpe, STMPE24XX_PWMCS);
+	if (ret < 0) {
+		dev_err(chip->dev, "error reading PWM#%u control\n",
+			pwm->hwpwm);
+		return;
+	}
+
+	value = ret & ~BIT(pwm->hwpwm);
+
+	ret = stmpe_reg_write(stmpe_pwm->stmpe, STMPE24XX_PWMCS, value);
+	if (ret) {
+		dev_err(chip->dev, "error writing PWM#%u control\n",
+			pwm->hwpwm);
+		return;
+	}
+}
+
+/* STMPE 24xx PWM instructions */
+#define SMAX		0x007f
+#define SMIN		0x00ff
+#define GTS		0x0000
+#define LOAD		BIT(14) /* Only available on 2403 */
+#define RAMPUP		0x0000
+#define RAMPDOWN	BIT(7)
+#define PRESCALE_512	BIT(14)
+#define STEPTIME_1	BIT(8)
+#define BRANCH		(BIT(15) | BIT(13))
+
+static int stmpe_24xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+				 int duty_ns, int period_ns)
+{
+	struct stmpe_pwm *stmpe_pwm = to_stmpe_pwm(chip);
+	unsigned int i, pin;
+	u16 program[3] = {
+		SMAX,
+		GTS,
+		GTS,
+	};
+	u8 offset;
+	int ret;
+
+	/* Make sure we are disabled */
+	if (pwm_is_enabled(pwm)) {
+		stmpe_24xx_pwm_disable(chip, pwm);
+	} else {
+		/* Connect the PWM to the pin */
+		pin = pwm->hwpwm;
+
+		/* On STMPE2401 and 2403 pins 21,22,23 are used */
+		if (stmpe_pwm->stmpe->partnum == STMPE2401 ||
+		    stmpe_pwm->stmpe->partnum == STMPE2403)
+			pin += STMPE_PWM_24XX_PINBASE;
+
+		ret = stmpe_set_altfunc(stmpe_pwm->stmpe, BIT(pin),
+					STMPE_BLOCK_PWM);
+		if (ret) {
+			dev_err(chip->dev, "unable to connect PWM#%u to pin\n",
+				pwm->hwpwm);
+			return ret;
+		}
+	}
+
+	/* STMPE24XX */
+	switch (pwm->hwpwm) {
+	case 0:
+		offset = STMPE24XX_PWMIC0;
+		break;
+
+	case 1:
+		offset = STMPE24XX_PWMIC1;
+		break;
+
+	case 2:
+		offset = STMPE24XX_PWMIC2;
+		break;
+
+	default:
+		/* Should not happen as npwm is 3 */
+		return -ENODEV;
+	}
+
+	dev_dbg(chip->dev, "PWM#%u: config duty %d ns, period %d ns\n",
+		pwm->hwpwm, duty_ns, period_ns);
+
+	if (duty_ns == 0) {
+		if (stmpe_pwm->stmpe->partnum == STMPE2401)
+			program[0] = SMAX; /* off all the time */
+
+		if (stmpe_pwm->stmpe->partnum == STMPE2403)
+			program[0] = LOAD | 0xff; /* LOAD 0xff */
+
+		stmpe_pwm->last_duty = 0x00;
+	} else if (duty_ns == period_ns) {
+		if (stmpe_pwm->stmpe->partnum == STMPE2401)
+			program[0] = SMIN; /* on all the time */
+
+		if (stmpe_pwm->stmpe->partnum == STMPE2403)
+			program[0] = LOAD | 0x00; /* LOAD 0x00 */
+
+		stmpe_pwm->last_duty = 0xff;
+	} else {
+		u8 value, last = stmpe_pwm->last_duty;
+		unsigned long duty;
+
+		/*
+		 * Counter goes from 0x00 to 0xff repeatedly at 32768 Hz,
+		 * (means a period of 30517 ns) then this is compared to the
+		 * counter from the ramp, if this is >= PWM counter the output
+		 * is high. With LOAD we can define how much of the cycle it
+		 * is on.
+		 *
+		 * Prescale = 0 -> 2 kHz -> T = 1/f = 488281.25 ns
+		 */
+
+		/* Scale to 0..0xff */
+		duty = duty_ns * 256;
+		duty = DIV_ROUND_CLOSEST(duty, period_ns);
+		value = duty;
+
+		if (value == last) {
+			/* Run the old program */
+			if (pwm_is_enabled(pwm))
+				stmpe_24xx_pwm_enable(chip, pwm);
+
+			return 0;
+		} else if (stmpe_pwm->stmpe->partnum == STMPE2403) {
+			/* STMPE2403 can simply set the right PWM value */
+			program[0] = LOAD | value;
+			program[1] = 0x0000;
+		} else if (stmpe_pwm->stmpe->partnum == STMPE2401) {
+			/* STMPE2401 need a complex program */
+			u16 incdec = 0x0000;
+
+			if (last < value)
+				/* Count up */
+				incdec = RAMPUP | (value - last);
+			else
+				/* Count down */
+				incdec = RAMPDOWN | (last - value);
+
+			/* Step to desired value, smoothly */
+			program[0] = PRESCALE_512 | STEPTIME_1 | incdec;
+
+			/* Loop eternally to 0x00 */
+			program[1] = BRANCH;
+		}
+
+		dev_dbg(chip->dev,
+			"PWM#%u: value = %02x, last_duty = %02x, program=%04x,%04x,%04x\n",
+			pwm->hwpwm, value, last, program[0], program[1],
+			program[2]);
+		stmpe_pwm->last_duty = value;
+	}
+
+	/*
+	 * We can write programs of up to 64 16-bit words into this channel.
+	 */
+	for (i = 0; i < ARRAY_SIZE(program); i++) {
+		u8 value;
+
+		value = (program[i] >> 8) & 0xff;
+
+		ret = stmpe_reg_write(stmpe_pwm->stmpe, offset, value);
+		if (ret) {
+			dev_err(chip->dev, "error writing register %02x: %d\n",
+				offset, ret);
+			return ret;
+		}
+
+		value = program[i] & 0xff;
+
+		ret = stmpe_reg_write(stmpe_pwm->stmpe, offset, value);
+		if (ret) {
+			dev_err(chip->dev, "error writing register %02x: %d\n",
+				offset, ret);
+			return ret;
+		}
+	}
+
+	/* If we were enabled, re-enable this PWM */
+	if (pwm_is_enabled(pwm))
+		stmpe_24xx_pwm_enable(chip, pwm);
+
+	/* Sleep for 200ms so we're sure it will take effect */
+	msleep(200);
+
+	dev_dbg(chip->dev, "programmed PWM#%u, %u bytes\n", pwm->hwpwm, i);
+
+	return 0;
+}
+
+static int stmpe_24xx_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+				const struct pwm_state *state)
+{
+	int err;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		if (pwm->state.enabled)
+			stmpe_24xx_pwm_disable(chip, pwm);
+
+		return 0;
+	}
+
+	err = stmpe_24xx_pwm_config(pwm->chip, pwm, state->duty_cycle, state->period);
+	if (err)
+		return err;
+
+	if (!pwm->state.enabled)
+		err = stmpe_24xx_pwm_enable(chip, pwm);
+
+	return err;
+}
+
+static const struct pwm_ops stmpe_24xx_pwm_ops = {
+	.apply = stmpe_24xx_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static int __init stmpe_pwm_probe(struct platform_device *pdev)
+{
+	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
+	struct stmpe_pwm *stmpe_pwm;
+	int ret;
+
+	stmpe_pwm = devm_kzalloc(&pdev->dev, sizeof(*stmpe_pwm), GFP_KERNEL);
+	if (!stmpe_pwm)
+		return -ENOMEM;
+
+	stmpe_pwm->stmpe = stmpe;
+	stmpe_pwm->chip.dev = &pdev->dev;
+
+	if (stmpe->partnum == STMPE2401 || stmpe->partnum == STMPE2403) {
+		stmpe_pwm->chip.ops = &stmpe_24xx_pwm_ops;
+		stmpe_pwm->chip.npwm = 3;
+	} else {
+		if (stmpe->partnum == STMPE1601)
+			dev_err(&pdev->dev, "STMPE1601 not yet supported\n");
+		else
+			dev_err(&pdev->dev, "Unknown STMPE PWM\n");
+
+		return -ENODEV;
+	}
+
+	ret = stmpe_enable(stmpe, STMPE_BLOCK_PWM);
+	if (ret)
+		return ret;
+
+	ret = pwmchip_add(&stmpe_pwm->chip);
+	if (ret) {
+		stmpe_disable(stmpe, STMPE_BLOCK_PWM);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct platform_driver stmpe_pwm_driver = {
+	.driver = {
+		.name = "stmpe-pwm",
+	},
+};
+builtin_platform_driver_probe(stmpe_pwm_driver, stmpe_pwm_probe);
diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
new file mode 100644
index 000000000..37d75e252
--- /dev/null
+++ b/drivers/pwm/pwm-sun4i.c
@@ -0,0 +1,503 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for Allwinner sun4i Pulse Width Modulation Controller
+ *
+ * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * Limitations:
+ * - When outputing the source clock directly, the PWM logic will be bypassed
+ *   and the currently running period is not guaranteed to be completed
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/time.h>
+
+#define PWM_CTRL_REG		0x0
+
+#define PWM_CH_PRD_BASE		0x4
+#define PWM_CH_PRD_OFFSET	0x4
+#define PWM_CH_PRD(ch)		(PWM_CH_PRD_BASE + PWM_CH_PRD_OFFSET * (ch))
+
+#define PWMCH_OFFSET		15
+#define PWM_PRESCAL_MASK	GENMASK(3, 0)
+#define PWM_PRESCAL_OFF		0
+#define PWM_EN			BIT(4)
+#define PWM_ACT_STATE		BIT(5)
+#define PWM_CLK_GATING		BIT(6)
+#define PWM_MODE		BIT(7)
+#define PWM_PULSE		BIT(8)
+#define PWM_BYPASS		BIT(9)
+
+#define PWM_RDY_BASE		28
+#define PWM_RDY_OFFSET		1
+#define PWM_RDY(ch)		BIT(PWM_RDY_BASE + PWM_RDY_OFFSET * (ch))
+
+#define PWM_PRD(prd)		(((prd) - 1) << 16)
+#define PWM_PRD_MASK		GENMASK(15, 0)
+
+#define PWM_DTY_MASK		GENMASK(15, 0)
+
+#define PWM_REG_PRD(reg)	((((reg) >> 16) & PWM_PRD_MASK) + 1)
+#define PWM_REG_DTY(reg)	((reg) & PWM_DTY_MASK)
+#define PWM_REG_PRESCAL(reg, chan)	(((reg) >> ((chan) * PWMCH_OFFSET)) & PWM_PRESCAL_MASK)
+
+#define BIT_CH(bit, chan)	((bit) << ((chan) * PWMCH_OFFSET))
+
+static const u32 prescaler_table[] = {
+	120,
+	180,
+	240,
+	360,
+	480,
+	0,
+	0,
+	0,
+	12000,
+	24000,
+	36000,
+	48000,
+	72000,
+	0,
+	0,
+	0, /* Actually 1 but tested separately */
+};
+
+struct sun4i_pwm_data {
+	bool has_prescaler_bypass;
+	bool has_direct_mod_clk_output;
+	unsigned int npwm;
+};
+
+struct sun4i_pwm_chip {
+	struct pwm_chip chip;
+	struct clk *bus_clk;
+	struct clk *clk;
+	struct reset_control *rst;
+	void __iomem *base;
+	spinlock_t ctrl_lock;
+	const struct sun4i_pwm_data *data;
+};
+
+static inline struct sun4i_pwm_chip *to_sun4i_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct sun4i_pwm_chip, chip);
+}
+
+static inline u32 sun4i_pwm_readl(struct sun4i_pwm_chip *chip,
+				  unsigned long offset)
+{
+	return readl(chip->base + offset);
+}
+
+static inline void sun4i_pwm_writel(struct sun4i_pwm_chip *chip,
+				    u32 val, unsigned long offset)
+{
+	writel(val, chip->base + offset);
+}
+
+static int sun4i_pwm_get_state(struct pwm_chip *chip,
+			       struct pwm_device *pwm,
+			       struct pwm_state *state)
+{
+	struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
+	u64 clk_rate, tmp;
+	u32 val;
+	unsigned int prescaler;
+
+	clk_rate = clk_get_rate(sun4i_pwm->clk);
+
+	val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
+
+	/*
+	 * PWM chapter in H6 manual has a diagram which explains that if bypass
+	 * bit is set, no other setting has any meaning. Even more, experiment
+	 * proved that also enable bit is ignored in this case.
+	 */
+	if ((val & BIT_CH(PWM_BYPASS, pwm->hwpwm)) &&
+	    sun4i_pwm->data->has_direct_mod_clk_output) {
+		state->period = DIV_ROUND_UP_ULL(NSEC_PER_SEC, clk_rate);
+		state->duty_cycle = DIV_ROUND_UP_ULL(state->period, 2);
+		state->polarity = PWM_POLARITY_NORMAL;
+		state->enabled = true;
+		return 0;
+	}
+
+	if ((PWM_REG_PRESCAL(val, pwm->hwpwm) == PWM_PRESCAL_MASK) &&
+	    sun4i_pwm->data->has_prescaler_bypass)
+		prescaler = 1;
+	else
+		prescaler = prescaler_table[PWM_REG_PRESCAL(val, pwm->hwpwm)];
+
+	if (prescaler == 0)
+		return 0;
+
+	if (val & BIT_CH(PWM_ACT_STATE, pwm->hwpwm))
+		state->polarity = PWM_POLARITY_NORMAL;
+	else
+		state->polarity = PWM_POLARITY_INVERSED;
+
+	if ((val & BIT_CH(PWM_CLK_GATING | PWM_EN, pwm->hwpwm)) ==
+	    BIT_CH(PWM_CLK_GATING | PWM_EN, pwm->hwpwm))
+		state->enabled = true;
+	else
+		state->enabled = false;
+
+	val = sun4i_pwm_readl(sun4i_pwm, PWM_CH_PRD(pwm->hwpwm));
+
+	tmp = (u64)prescaler * NSEC_PER_SEC * PWM_REG_DTY(val);
+	state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
+
+	tmp = (u64)prescaler * NSEC_PER_SEC * PWM_REG_PRD(val);
+	state->period = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
+
+	return 0;
+}
+
+static int sun4i_pwm_calculate(struct sun4i_pwm_chip *sun4i_pwm,
+			       const struct pwm_state *state,
+			       u32 *dty, u32 *prd, unsigned int *prsclr,
+			       bool *bypass)
+{
+	u64 clk_rate, div = 0;
+	unsigned int prescaler = 0;
+
+	clk_rate = clk_get_rate(sun4i_pwm->clk);
+
+	*bypass = sun4i_pwm->data->has_direct_mod_clk_output &&
+		  state->enabled &&
+		  (state->period * clk_rate >= NSEC_PER_SEC) &&
+		  (state->period * clk_rate < 2 * NSEC_PER_SEC) &&
+		  (state->duty_cycle * clk_rate * 2 >= NSEC_PER_SEC);
+
+	/* Skip calculation of other parameters if we bypass them */
+	if (*bypass)
+		return 0;
+
+	if (sun4i_pwm->data->has_prescaler_bypass) {
+		/* First, test without any prescaler when available */
+		prescaler = PWM_PRESCAL_MASK;
+		/*
+		 * When not using any prescaler, the clock period in nanoseconds
+		 * is not an integer so round it half up instead of
+		 * truncating to get less surprising values.
+		 */
+		div = clk_rate * state->period + NSEC_PER_SEC / 2;
+		do_div(div, NSEC_PER_SEC);
+		if (div - 1 > PWM_PRD_MASK)
+			prescaler = 0;
+	}
+
+	if (prescaler == 0) {
+		/* Go up from the first divider */
+		for (prescaler = 0; prescaler < PWM_PRESCAL_MASK; prescaler++) {
+			unsigned int pval = prescaler_table[prescaler];
+
+			if (!pval)
+				continue;
+
+			div = clk_rate;
+			do_div(div, pval);
+			div = div * state->period;
+			do_div(div, NSEC_PER_SEC);
+			if (div - 1 <= PWM_PRD_MASK)
+				break;
+		}
+
+		if (div - 1 > PWM_PRD_MASK)
+			return -EINVAL;
+	}
+
+	*prd = div;
+	div *= state->duty_cycle;
+	do_div(div, state->period);
+	*dty = div;
+	*prsclr = prescaler;
+
+	return 0;
+}
+
+static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			   const struct pwm_state *state)
+{
+	struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
+	struct pwm_state cstate;
+	u32 ctrl, duty = 0, period = 0, val;
+	int ret;
+	unsigned int delay_us, prescaler = 0;
+	bool bypass;
+
+	pwm_get_state(pwm, &cstate);
+
+	if (!cstate.enabled) {
+		ret = clk_prepare_enable(sun4i_pwm->clk);
+		if (ret) {
+			dev_err(chip->dev, "failed to enable PWM clock\n");
+			return ret;
+		}
+	}
+
+	ret = sun4i_pwm_calculate(sun4i_pwm, state, &duty, &period, &prescaler,
+				  &bypass);
+	if (ret) {
+		dev_err(chip->dev, "period exceeds the maximum value\n");
+		if (!cstate.enabled)
+			clk_disable_unprepare(sun4i_pwm->clk);
+		return ret;
+	}
+
+	spin_lock(&sun4i_pwm->ctrl_lock);
+	ctrl = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
+
+	if (sun4i_pwm->data->has_direct_mod_clk_output) {
+		if (bypass) {
+			ctrl |= BIT_CH(PWM_BYPASS, pwm->hwpwm);
+			/* We can skip other parameter */
+			sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
+			spin_unlock(&sun4i_pwm->ctrl_lock);
+			return 0;
+		}
+
+		ctrl &= ~BIT_CH(PWM_BYPASS, pwm->hwpwm);
+	}
+
+	if (PWM_REG_PRESCAL(ctrl, pwm->hwpwm) != prescaler) {
+		/* Prescaler changed, the clock has to be gated */
+		ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
+		sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
+
+		ctrl &= ~BIT_CH(PWM_PRESCAL_MASK, pwm->hwpwm);
+		ctrl |= BIT_CH(prescaler, pwm->hwpwm);
+	}
+
+	val = (duty & PWM_DTY_MASK) | PWM_PRD(period);
+	sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm));
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		ctrl &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
+	else
+		ctrl |= BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
+
+	ctrl |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
+
+	if (state->enabled)
+		ctrl |= BIT_CH(PWM_EN, pwm->hwpwm);
+
+	sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
+
+	spin_unlock(&sun4i_pwm->ctrl_lock);
+
+	if (state->enabled)
+		return 0;
+
+	/* We need a full period to elapse before disabling the channel. */
+	delay_us = DIV_ROUND_UP_ULL(cstate.period, NSEC_PER_USEC);
+	if ((delay_us / 500) > MAX_UDELAY_MS)
+		msleep(delay_us / 1000 + 1);
+	else
+		usleep_range(delay_us, delay_us * 2);
+
+	spin_lock(&sun4i_pwm->ctrl_lock);
+	ctrl = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
+	ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
+	ctrl &= ~BIT_CH(PWM_EN, pwm->hwpwm);
+	sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
+	spin_unlock(&sun4i_pwm->ctrl_lock);
+
+	clk_disable_unprepare(sun4i_pwm->clk);
+
+	return 0;
+}
+
+static const struct pwm_ops sun4i_pwm_ops = {
+	.apply = sun4i_pwm_apply,
+	.get_state = sun4i_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static const struct sun4i_pwm_data sun4i_pwm_dual_nobypass = {
+	.has_prescaler_bypass = false,
+	.npwm = 2,
+};
+
+static const struct sun4i_pwm_data sun4i_pwm_dual_bypass = {
+	.has_prescaler_bypass = true,
+	.npwm = 2,
+};
+
+static const struct sun4i_pwm_data sun4i_pwm_single_bypass = {
+	.has_prescaler_bypass = true,
+	.npwm = 1,
+};
+
+static const struct sun4i_pwm_data sun50i_a64_pwm_data = {
+	.has_prescaler_bypass = true,
+	.has_direct_mod_clk_output = true,
+	.npwm = 1,
+};
+
+static const struct sun4i_pwm_data sun50i_h6_pwm_data = {
+	.has_prescaler_bypass = true,
+	.has_direct_mod_clk_output = true,
+	.npwm = 2,
+};
+
+static const struct of_device_id sun4i_pwm_dt_ids[] = {
+	{
+		.compatible = "allwinner,sun4i-a10-pwm",
+		.data = &sun4i_pwm_dual_nobypass,
+	}, {
+		.compatible = "allwinner,sun5i-a10s-pwm",
+		.data = &sun4i_pwm_dual_bypass,
+	}, {
+		.compatible = "allwinner,sun5i-a13-pwm",
+		.data = &sun4i_pwm_single_bypass,
+	}, {
+		.compatible = "allwinner,sun7i-a20-pwm",
+		.data = &sun4i_pwm_dual_bypass,
+	}, {
+		.compatible = "allwinner,sun8i-h3-pwm",
+		.data = &sun4i_pwm_single_bypass,
+	}, {
+		.compatible = "allwinner,sun50i-a64-pwm",
+		.data = &sun50i_a64_pwm_data,
+	}, {
+		.compatible = "allwinner,sun50i-h6-pwm",
+		.data = &sun50i_h6_pwm_data,
+	}, {
+		/* sentinel */
+	},
+};
+MODULE_DEVICE_TABLE(of, sun4i_pwm_dt_ids);
+
+static int sun4i_pwm_probe(struct platform_device *pdev)
+{
+	struct sun4i_pwm_chip *sun4ichip;
+	int ret;
+
+	sun4ichip = devm_kzalloc(&pdev->dev, sizeof(*sun4ichip), GFP_KERNEL);
+	if (!sun4ichip)
+		return -ENOMEM;
+
+	sun4ichip->data = of_device_get_match_data(&pdev->dev);
+	if (!sun4ichip->data)
+		return -ENODEV;
+
+	sun4ichip->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(sun4ichip->base))
+		return PTR_ERR(sun4ichip->base);
+
+	/*
+	 * All hardware variants need a source clock that is divided and
+	 * then feeds the counter that defines the output wave form. In the
+	 * device tree this clock is either unnamed or called "mod".
+	 * Some variants (e.g. H6) need another clock to access the
+	 * hardware registers; this is called "bus".
+	 * So we request "mod" first (and ignore the corner case that a
+	 * parent provides a "mod" clock while the right one would be the
+	 * unnamed one of the PWM device) and if this is not found we fall
+	 * back to the first clock of the PWM.
+	 */
+	sun4ichip->clk = devm_clk_get_optional(&pdev->dev, "mod");
+	if (IS_ERR(sun4ichip->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(sun4ichip->clk),
+				     "get mod clock failed\n");
+
+	if (!sun4ichip->clk) {
+		sun4ichip->clk = devm_clk_get(&pdev->dev, NULL);
+		if (IS_ERR(sun4ichip->clk))
+			return dev_err_probe(&pdev->dev, PTR_ERR(sun4ichip->clk),
+					     "get unnamed clock failed\n");
+	}
+
+	sun4ichip->bus_clk = devm_clk_get_optional(&pdev->dev, "bus");
+	if (IS_ERR(sun4ichip->bus_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(sun4ichip->bus_clk),
+				     "get bus clock failed\n");
+
+	sun4ichip->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
+	if (IS_ERR(sun4ichip->rst))
+		return dev_err_probe(&pdev->dev, PTR_ERR(sun4ichip->rst),
+				     "get reset failed\n");
+
+	/* Deassert reset */
+	ret = reset_control_deassert(sun4ichip->rst);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot deassert reset control: %pe\n",
+			ERR_PTR(ret));
+		return ret;
+	}
+
+	/*
+	 * We're keeping the bus clock on for the sake of simplicity.
+	 * Actually it only needs to be on for hardware register accesses.
+	 */
+	ret = clk_prepare_enable(sun4ichip->bus_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot prepare and enable bus_clk %pe\n",
+			ERR_PTR(ret));
+		goto err_bus;
+	}
+
+	sun4ichip->chip.dev = &pdev->dev;
+	sun4ichip->chip.ops = &sun4i_pwm_ops;
+	sun4ichip->chip.npwm = sun4ichip->data->npwm;
+
+	spin_lock_init(&sun4ichip->ctrl_lock);
+
+	ret = pwmchip_add(&sun4ichip->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
+		goto err_pwm_add;
+	}
+
+	platform_set_drvdata(pdev, sun4ichip);
+
+	return 0;
+
+err_pwm_add:
+	clk_disable_unprepare(sun4ichip->bus_clk);
+err_bus:
+	reset_control_assert(sun4ichip->rst);
+
+	return ret;
+}
+
+static int sun4i_pwm_remove(struct platform_device *pdev)
+{
+	struct sun4i_pwm_chip *sun4ichip = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&sun4ichip->chip);
+
+	clk_disable_unprepare(sun4ichip->bus_clk);
+	reset_control_assert(sun4ichip->rst);
+
+	return 0;
+}
+
+static struct platform_driver sun4i_pwm_driver = {
+	.driver = {
+		.name = "sun4i-pwm",
+		.of_match_table = sun4i_pwm_dt_ids,
+	},
+	.probe = sun4i_pwm_probe,
+	.remove = sun4i_pwm_remove,
+};
+module_platform_driver(sun4i_pwm_driver);
+
+MODULE_ALIAS("platform:sun4i-pwm");
+MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>");
+MODULE_DESCRIPTION("Allwinner sun4i PWM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-sunplus.c b/drivers/pwm/pwm-sunplus.c
new file mode 100644
index 000000000..d6ebe9f03
--- /dev/null
+++ b/drivers/pwm/pwm-sunplus.c
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PWM device driver for SUNPLUS SP7021 SoC
+ *
+ * Links:
+ *   Reference Manual:
+ *   https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
+ *
+ *   Reference Manual(PWM module):
+ *   https://sunplus.atlassian.net/wiki/spaces/doc/pages/461144198/12.+Pulse+Width+Modulation+PWM
+ *
+ * Limitations:
+ * - Only supports normal polarity.
+ * - It output low when PWM channel disabled.
+ * - When the parameters change, current running period will not be completed
+ *     and run new settings immediately.
+ * - In .apply() PWM output need to write register FREQ and DUTY. When first write FREQ
+ *     done and not yet write DUTY, it has short timing gap use new FREQ and old DUTY.
+ *
+ * Author: Hammer Hsieh <hammerh0314@gmail.com>
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+#define SP7021_PWM_MODE0		0x000
+#define SP7021_PWM_MODE0_PWMEN(ch)	BIT(ch)
+#define SP7021_PWM_MODE0_BYPASS(ch)	BIT(8 + (ch))
+#define SP7021_PWM_MODE1		0x004
+#define SP7021_PWM_MODE1_CNT_EN(ch)	BIT(ch)
+#define SP7021_PWM_FREQ(ch)		(0x008 + 4 * (ch))
+#define SP7021_PWM_FREQ_MAX		GENMASK(15, 0)
+#define SP7021_PWM_DUTY(ch)		(0x018 + 4 * (ch))
+#define SP7021_PWM_DUTY_DD_SEL(ch)	FIELD_PREP(GENMASK(9, 8), ch)
+#define SP7021_PWM_DUTY_MAX		GENMASK(7, 0)
+#define SP7021_PWM_DUTY_MASK		SP7021_PWM_DUTY_MAX
+#define SP7021_PWM_FREQ_SCALER		256
+#define SP7021_PWM_NUM			4
+
+struct sunplus_pwm {
+	struct pwm_chip chip;
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static inline struct sunplus_pwm *to_sunplus_pwm(struct pwm_chip *chip)
+{
+	return container_of(chip, struct sunplus_pwm, chip);
+}
+
+static int sunplus_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			     const struct pwm_state *state)
+{
+	struct sunplus_pwm *priv = to_sunplus_pwm(chip);
+	u32 dd_freq, duty, mode0, mode1;
+	u64 clk_rate;
+
+	if (state->polarity != pwm->state.polarity)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		/* disable pwm channel output */
+		mode0 = readl(priv->base + SP7021_PWM_MODE0);
+		mode0 &= ~SP7021_PWM_MODE0_PWMEN(pwm->hwpwm);
+		writel(mode0, priv->base + SP7021_PWM_MODE0);
+		/* disable pwm channel clk source */
+		mode1 = readl(priv->base + SP7021_PWM_MODE1);
+		mode1 &= ~SP7021_PWM_MODE1_CNT_EN(pwm->hwpwm);
+		writel(mode1, priv->base + SP7021_PWM_MODE1);
+		return 0;
+	}
+
+	clk_rate = clk_get_rate(priv->clk);
+
+	/*
+	 * The following calculations might overflow if clk is bigger
+	 * than 256 GHz. In practise it's 202.5MHz, so this limitation
+	 * is only theoretic.
+	 */
+	if (clk_rate > (u64)SP7021_PWM_FREQ_SCALER * NSEC_PER_SEC)
+		return -EINVAL;
+
+	/*
+	 * With clk_rate limited above we have dd_freq <= state->period,
+	 * so this cannot overflow.
+	 */
+	dd_freq = mul_u64_u64_div_u64(clk_rate, state->period, (u64)SP7021_PWM_FREQ_SCALER
+				* NSEC_PER_SEC);
+
+	if (dd_freq == 0)
+		return -EINVAL;
+
+	if (dd_freq > SP7021_PWM_FREQ_MAX)
+		dd_freq = SP7021_PWM_FREQ_MAX;
+
+	writel(dd_freq, priv->base + SP7021_PWM_FREQ(pwm->hwpwm));
+
+	/* cal and set pwm duty */
+	mode0 = readl(priv->base + SP7021_PWM_MODE0);
+	mode0 |= SP7021_PWM_MODE0_PWMEN(pwm->hwpwm);
+	mode1 = readl(priv->base + SP7021_PWM_MODE1);
+	mode1 |= SP7021_PWM_MODE1_CNT_EN(pwm->hwpwm);
+	if (state->duty_cycle == state->period) {
+		/* PWM channel output = high */
+		mode0 |= SP7021_PWM_MODE0_BYPASS(pwm->hwpwm);
+		duty = SP7021_PWM_DUTY_DD_SEL(pwm->hwpwm) | SP7021_PWM_DUTY_MAX;
+	} else {
+		mode0 &= ~SP7021_PWM_MODE0_BYPASS(pwm->hwpwm);
+		/*
+		 * duty_ns <= period_ns 27 bits, clk_rate 28 bits, won't overflow.
+		 */
+		duty = mul_u64_u64_div_u64(state->duty_cycle, clk_rate,
+					   (u64)dd_freq * NSEC_PER_SEC);
+		duty = SP7021_PWM_DUTY_DD_SEL(pwm->hwpwm) | duty;
+	}
+	writel(duty, priv->base + SP7021_PWM_DUTY(pwm->hwpwm));
+	writel(mode1, priv->base + SP7021_PWM_MODE1);
+	writel(mode0, priv->base + SP7021_PWM_MODE0);
+
+	return 0;
+}
+
+static int sunplus_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+				 struct pwm_state *state)
+{
+	struct sunplus_pwm *priv = to_sunplus_pwm(chip);
+	u32 mode0, dd_freq, duty;
+	u64 clk_rate;
+
+	mode0 = readl(priv->base + SP7021_PWM_MODE0);
+
+	if (mode0 & BIT(pwm->hwpwm)) {
+		clk_rate = clk_get_rate(priv->clk);
+		dd_freq = readl(priv->base + SP7021_PWM_FREQ(pwm->hwpwm));
+		duty = readl(priv->base + SP7021_PWM_DUTY(pwm->hwpwm));
+		duty = FIELD_GET(SP7021_PWM_DUTY_MASK, duty);
+		/*
+		 * dd_freq 16 bits, SP7021_PWM_FREQ_SCALER 8 bits
+		 * NSEC_PER_SEC 30 bits, won't overflow.
+		 */
+		state->period = DIV64_U64_ROUND_UP((u64)dd_freq * (u64)SP7021_PWM_FREQ_SCALER
+						* NSEC_PER_SEC, clk_rate);
+		/*
+		 * dd_freq 16 bits, duty 8 bits, NSEC_PER_SEC 30 bits, won't overflow.
+		 */
+		state->duty_cycle = DIV64_U64_ROUND_UP((u64)dd_freq * (u64)duty * NSEC_PER_SEC,
+						       clk_rate);
+		state->enabled = true;
+	} else {
+		state->enabled = false;
+	}
+
+	state->polarity = PWM_POLARITY_NORMAL;
+
+	return 0;
+}
+
+static const struct pwm_ops sunplus_pwm_ops = {
+	.apply = sunplus_pwm_apply,
+	.get_state = sunplus_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static void sunplus_pwm_clk_release(void *data)
+{
+	struct clk *clk = data;
+
+	clk_disable_unprepare(clk);
+}
+
+static int sunplus_pwm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct sunplus_pwm *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk))
+		return dev_err_probe(dev, PTR_ERR(priv->clk),
+				     "get pwm clock failed\n");
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret < 0) {
+		dev_err(dev, "failed to enable clock: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(dev, sunplus_pwm_clk_release, priv->clk);
+	if (ret < 0) {
+		dev_err(dev, "failed to release clock: %d\n", ret);
+		return ret;
+	}
+
+	priv->chip.dev = dev;
+	priv->chip.ops = &sunplus_pwm_ops;
+	priv->chip.npwm = SP7021_PWM_NUM;
+
+	ret = devm_pwmchip_add(dev, &priv->chip);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Cannot register sunplus PWM\n");
+
+	return 0;
+}
+
+static const struct of_device_id sunplus_pwm_of_match[] = {
+	{ .compatible = "sunplus,sp7021-pwm", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sunplus_pwm_of_match);
+
+static struct platform_driver sunplus_pwm_driver = {
+	.probe		= sunplus_pwm_probe,
+	.driver		= {
+		.name	= "sunplus-pwm",
+		.of_match_table = sunplus_pwm_of_match,
+	},
+};
+module_platform_driver(sunplus_pwm_driver);
+
+MODULE_DESCRIPTION("Sunplus SoC PWM Driver");
+MODULE_AUTHOR("Hammer Hsieh <hammerh0314@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c
new file mode 100644
index 000000000..249dc0193
--- /dev/null
+++ b/drivers/pwm/pwm-tegra.c
@@ -0,0 +1,445 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * drivers/pwm/pwm-tegra.c
+ *
+ * Tegra pulse-width-modulation controller driver
+ *
+ * Copyright (c) 2010-2020, NVIDIA Corporation.
+ * Based on arch/arm/plat-mxc/pwm.c by Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * Overview of Tegra Pulse Width Modulator Register:
+ * 1. 13-bit: Frequency division (SCALE)
+ * 2. 8-bit : Pulse division (DUTY)
+ * 3. 1-bit : Enable bit
+ *
+ * The PWM clock frequency is divided by 256 before subdividing it based
+ * on the programmable frequency division value to generate the required
+ * frequency for PWM output. The maximum output frequency that can be
+ * achieved is (max rate of source clock) / 256.
+ * e.g. if source clock rate is 408 MHz, maximum output frequency can be:
+ * 408 MHz/256 = 1.6 MHz.
+ * This 1.6 MHz frequency can further be divided using SCALE value in PWM.
+ *
+ * PWM pulse width: 8 bits are usable [23:16] for varying pulse width.
+ * To achieve 100% duty cycle, program Bit [24] of this register to
+ * 1’b1. In which case the other bits [23:16] are set to don't care.
+ *
+ * Limitations:
+ * -	When PWM is disabled, the output is driven to inactive.
+ * -	It does not allow the current PWM period to complete and
+ *	stops abruptly.
+ *
+ * -	If the register is reconfigured while PWM is running,
+ *	it does not complete the currently running period.
+ *
+ * -	If the user input duty is beyond acceptible limits,
+ *	-EINVAL is returned.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pm_opp.h>
+#include <linux/pwm.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/reset.h>
+
+#include <soc/tegra/common.h>
+
+#define PWM_ENABLE	(1 << 31)
+#define PWM_DUTY_WIDTH	8
+#define PWM_DUTY_SHIFT	16
+#define PWM_SCALE_WIDTH	13
+#define PWM_SCALE_SHIFT	0
+
+struct tegra_pwm_soc {
+	unsigned int num_channels;
+
+	/* Maximum IP frequency for given SoCs */
+	unsigned long max_frequency;
+};
+
+struct tegra_pwm_chip {
+	struct pwm_chip chip;
+	struct device *dev;
+
+	struct clk *clk;
+	struct reset_control*rst;
+
+	unsigned long clk_rate;
+	unsigned long min_period_ns;
+
+	void __iomem *regs;
+
+	const struct tegra_pwm_soc *soc;
+};
+
+static inline struct tegra_pwm_chip *to_tegra_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct tegra_pwm_chip, chip);
+}
+
+static inline u32 pwm_readl(struct tegra_pwm_chip *pc, unsigned int offset)
+{
+	return readl(pc->regs + (offset << 4));
+}
+
+static inline void pwm_writel(struct tegra_pwm_chip *pc, unsigned int offset, u32 value)
+{
+	writel(value, pc->regs + (offset << 4));
+}
+
+static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			    int duty_ns, int period_ns)
+{
+	struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip);
+	unsigned long long c = duty_ns;
+	unsigned long rate, required_clk_rate;
+	u32 val = 0;
+	int err;
+
+	/*
+	 * Convert from duty_ns / period_ns to a fixed number of duty ticks
+	 * per (1 << PWM_DUTY_WIDTH) cycles and make sure to round to the
+	 * nearest integer during division.
+	 */
+	c *= (1 << PWM_DUTY_WIDTH);
+	c = DIV_ROUND_CLOSEST_ULL(c, period_ns);
+
+	val = (u32)c << PWM_DUTY_SHIFT;
+
+	/*
+	 *  min period = max clock limit >> PWM_DUTY_WIDTH
+	 */
+	if (period_ns < pc->min_period_ns)
+		return -EINVAL;
+
+	/*
+	 * Compute the prescaler value for which (1 << PWM_DUTY_WIDTH)
+	 * cycles at the PWM clock rate will take period_ns nanoseconds.
+	 *
+	 * num_channels: If single instance of PWM controller has multiple
+	 * channels (e.g. Tegra210 or older) then it is not possible to
+	 * configure separate clock rates to each of the channels, in such
+	 * case the value stored during probe will be referred.
+	 *
+	 * If every PWM controller instance has one channel respectively, i.e.
+	 * nums_channels == 1 then only the clock rate can be modified
+	 * dynamically (e.g. Tegra186 or Tegra194).
+	 */
+	if (pc->soc->num_channels == 1) {
+		/*
+		 * Rate is multiplied with 2^PWM_DUTY_WIDTH so that it matches
+		 * with the maximum possible rate that the controller can
+		 * provide. Any further lower value can be derived by setting
+		 * PFM bits[0:12].
+		 *
+		 * required_clk_rate is a reference rate for source clock and
+		 * it is derived based on user requested period. By setting the
+		 * source clock rate as required_clk_rate, PWM controller will
+		 * be able to configure the requested period.
+		 */
+		required_clk_rate = DIV_ROUND_UP_ULL((u64)NSEC_PER_SEC << PWM_DUTY_WIDTH,
+						     period_ns);
+
+		if (required_clk_rate > clk_round_rate(pc->clk, required_clk_rate))
+			/*
+			 * required_clk_rate is a lower bound for the input
+			 * rate; for lower rates there is no value for PWM_SCALE
+			 * that yields a period less than or equal to the
+			 * requested period. Hence, for lower rates, double the
+			 * required_clk_rate to get a clock rate that can meet
+			 * the requested period.
+			 */
+			required_clk_rate *= 2;
+
+		err = dev_pm_opp_set_rate(pc->dev, required_clk_rate);
+		if (err < 0)
+			return -EINVAL;
+
+		/* Store the new rate for further references */
+		pc->clk_rate = clk_get_rate(pc->clk);
+	}
+
+	/* Consider precision in PWM_SCALE_WIDTH rate calculation */
+	rate = mul_u64_u64_div_u64(pc->clk_rate, period_ns,
+				   (u64)NSEC_PER_SEC << PWM_DUTY_WIDTH);
+
+	/*
+	 * Since the actual PWM divider is the register's frequency divider
+	 * field plus 1, we need to decrement to get the correct value to
+	 * write to the register.
+	 */
+	if (rate > 0)
+		rate--;
+	else
+		return -EINVAL;
+
+	/*
+	 * Make sure that the rate will fit in the register's frequency
+	 * divider field.
+	 */
+	if (rate >> PWM_SCALE_WIDTH)
+		return -EINVAL;
+
+	val |= rate << PWM_SCALE_SHIFT;
+
+	/*
+	 * If the PWM channel is disabled, make sure to turn on the clock
+	 * before writing the register. Otherwise, keep it enabled.
+	 */
+	if (!pwm_is_enabled(pwm)) {
+		err = pm_runtime_resume_and_get(pc->dev);
+		if (err)
+			return err;
+	} else
+		val |= PWM_ENABLE;
+
+	pwm_writel(pc, pwm->hwpwm, val);
+
+	/*
+	 * If the PWM is not enabled, turn the clock off again to save power.
+	 */
+	if (!pwm_is_enabled(pwm))
+		pm_runtime_put(pc->dev);
+
+	return 0;
+}
+
+static int tegra_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip);
+	int rc = 0;
+	u32 val;
+
+	rc = pm_runtime_resume_and_get(pc->dev);
+	if (rc)
+		return rc;
+
+	val = pwm_readl(pc, pwm->hwpwm);
+	val |= PWM_ENABLE;
+	pwm_writel(pc, pwm->hwpwm, val);
+
+	return 0;
+}
+
+static void tegra_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip);
+	u32 val;
+
+	val = pwm_readl(pc, pwm->hwpwm);
+	val &= ~PWM_ENABLE;
+	pwm_writel(pc, pwm->hwpwm, val);
+
+	pm_runtime_put_sync(pc->dev);
+}
+
+static int tegra_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			   const struct pwm_state *state)
+{
+	int err;
+	bool enabled = pwm->state.enabled;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		if (enabled)
+			tegra_pwm_disable(chip, pwm);
+
+		return 0;
+	}
+
+	err = tegra_pwm_config(pwm->chip, pwm, state->duty_cycle, state->period);
+	if (err)
+		return err;
+
+	if (!enabled)
+		err = tegra_pwm_enable(chip, pwm);
+
+	return err;
+}
+
+static const struct pwm_ops tegra_pwm_ops = {
+	.apply = tegra_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static int tegra_pwm_probe(struct platform_device *pdev)
+{
+	struct tegra_pwm_chip *pc;
+	int ret;
+
+	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
+	if (!pc)
+		return -ENOMEM;
+
+	pc->soc = of_device_get_match_data(&pdev->dev);
+	pc->dev = &pdev->dev;
+
+	pc->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(pc->regs))
+		return PTR_ERR(pc->regs);
+
+	platform_set_drvdata(pdev, pc);
+
+	pc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pc->clk))
+		return PTR_ERR(pc->clk);
+
+	ret = devm_tegra_core_dev_init_opp_table_common(&pdev->dev);
+	if (ret)
+		return ret;
+
+	pm_runtime_enable(&pdev->dev);
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret)
+		return ret;
+
+	/* Set maximum frequency of the IP */
+	ret = dev_pm_opp_set_rate(pc->dev, pc->soc->max_frequency);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to set max frequency: %d\n", ret);
+		goto put_pm;
+	}
+
+	/*
+	 * The requested and configured frequency may differ due to
+	 * clock register resolutions. Get the configured frequency
+	 * so that PWM period can be calculated more accurately.
+	 */
+	pc->clk_rate = clk_get_rate(pc->clk);
+
+	/* Set minimum limit of PWM period for the IP */
+	pc->min_period_ns =
+	    (NSEC_PER_SEC / (pc->soc->max_frequency >> PWM_DUTY_WIDTH)) + 1;
+
+	pc->rst = devm_reset_control_get_exclusive(&pdev->dev, "pwm");
+	if (IS_ERR(pc->rst)) {
+		ret = PTR_ERR(pc->rst);
+		dev_err(&pdev->dev, "Reset control is not found: %d\n", ret);
+		goto put_pm;
+	}
+
+	reset_control_deassert(pc->rst);
+
+	pc->chip.dev = &pdev->dev;
+	pc->chip.ops = &tegra_pwm_ops;
+	pc->chip.npwm = pc->soc->num_channels;
+
+	ret = pwmchip_add(&pc->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+		reset_control_assert(pc->rst);
+		goto put_pm;
+	}
+
+	pm_runtime_put(&pdev->dev);
+
+	return 0;
+put_pm:
+	pm_runtime_put_sync_suspend(&pdev->dev);
+	pm_runtime_force_suspend(&pdev->dev);
+	return ret;
+}
+
+static int tegra_pwm_remove(struct platform_device *pdev)
+{
+	struct tegra_pwm_chip *pc = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&pc->chip);
+
+	reset_control_assert(pc->rst);
+
+	pm_runtime_force_suspend(&pdev->dev);
+
+	return 0;
+}
+
+static int __maybe_unused tegra_pwm_runtime_suspend(struct device *dev)
+{
+	struct tegra_pwm_chip *pc = dev_get_drvdata(dev);
+	int err;
+
+	clk_disable_unprepare(pc->clk);
+
+	err = pinctrl_pm_select_sleep_state(dev);
+	if (err) {
+		clk_prepare_enable(pc->clk);
+		return err;
+	}
+
+	return 0;
+}
+
+static int __maybe_unused tegra_pwm_runtime_resume(struct device *dev)
+{
+	struct tegra_pwm_chip *pc = dev_get_drvdata(dev);
+	int err;
+
+	err = pinctrl_pm_select_default_state(dev);
+	if (err)
+		return err;
+
+	err = clk_prepare_enable(pc->clk);
+	if (err) {
+		pinctrl_pm_select_sleep_state(dev);
+		return err;
+	}
+
+	return 0;
+}
+
+static const struct tegra_pwm_soc tegra20_pwm_soc = {
+	.num_channels = 4,
+	.max_frequency = 48000000UL,
+};
+
+static const struct tegra_pwm_soc tegra186_pwm_soc = {
+	.num_channels = 1,
+	.max_frequency = 102000000UL,
+};
+
+static const struct tegra_pwm_soc tegra194_pwm_soc = {
+	.num_channels = 1,
+	.max_frequency = 408000000UL,
+};
+
+static const struct of_device_id tegra_pwm_of_match[] = {
+	{ .compatible = "nvidia,tegra20-pwm", .data = &tegra20_pwm_soc },
+	{ .compatible = "nvidia,tegra186-pwm", .data = &tegra186_pwm_soc },
+	{ .compatible = "nvidia,tegra194-pwm", .data = &tegra194_pwm_soc },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, tegra_pwm_of_match);
+
+static const struct dev_pm_ops tegra_pwm_pm_ops = {
+	SET_RUNTIME_PM_OPS(tegra_pwm_runtime_suspend, tegra_pwm_runtime_resume,
+			   NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+};
+
+static struct platform_driver tegra_pwm_driver = {
+	.driver = {
+		.name = "tegra-pwm",
+		.of_match_table = tegra_pwm_of_match,
+		.pm = &tegra_pwm_pm_ops,
+	},
+	.probe = tegra_pwm_probe,
+	.remove = tegra_pwm_remove,
+};
+
+module_platform_driver(tegra_pwm_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sandipan Patra <spatra@nvidia.com>");
+MODULE_DESCRIPTION("Tegra PWM controller driver");
+MODULE_ALIAS("platform:tegra-pwm");
diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c
new file mode 100644
index 000000000..4701f0c9b
--- /dev/null
+++ b/drivers/pwm/pwm-tiecap.c
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ECAP PWM driver
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc. - https://www.ti.com/
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/pm_runtime.h>
+#include <linux/pwm.h>
+#include <linux/of_device.h>
+
+/* ECAP registers and bits definitions */
+#define CAP1			0x08
+#define CAP2			0x0C
+#define CAP3			0x10
+#define CAP4			0x14
+#define ECCTL2			0x2A
+#define ECCTL2_APWM_POL_LOW	BIT(10)
+#define ECCTL2_APWM_MODE	BIT(9)
+#define ECCTL2_SYNC_SEL_DISA	(BIT(7) | BIT(6))
+#define ECCTL2_TSCTR_FREERUN	BIT(4)
+
+struct ecap_context {
+	u32 cap3;
+	u32 cap4;
+	u16 ecctl2;
+};
+
+struct ecap_pwm_chip {
+	struct pwm_chip chip;
+	unsigned int clk_rate;
+	void __iomem *mmio_base;
+	struct ecap_context ctx;
+};
+
+static inline struct ecap_pwm_chip *to_ecap_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct ecap_pwm_chip, chip);
+}
+
+/*
+ * period_ns = 10^9 * period_cycles / PWM_CLK_RATE
+ * duty_ns   = 10^9 * duty_cycles / PWM_CLK_RATE
+ */
+static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			   int duty_ns, int period_ns, int enabled)
+{
+	struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
+	u32 period_cycles, duty_cycles;
+	unsigned long long c;
+	u16 value;
+
+	c = pc->clk_rate;
+	c = c * period_ns;
+	do_div(c, NSEC_PER_SEC);
+	period_cycles = (u32)c;
+
+	if (period_cycles < 1) {
+		period_cycles = 1;
+		duty_cycles = 1;
+	} else {
+		c = pc->clk_rate;
+		c = c * duty_ns;
+		do_div(c, NSEC_PER_SEC);
+		duty_cycles = (u32)c;
+	}
+
+	pm_runtime_get_sync(pc->chip.dev);
+
+	value = readw(pc->mmio_base + ECCTL2);
+
+	/* Configure APWM mode & disable sync option */
+	value |= ECCTL2_APWM_MODE | ECCTL2_SYNC_SEL_DISA;
+
+	writew(value, pc->mmio_base + ECCTL2);
+
+	if (!enabled) {
+		/* Update active registers if not running */
+		writel(duty_cycles, pc->mmio_base + CAP2);
+		writel(period_cycles, pc->mmio_base + CAP1);
+	} else {
+		/*
+		 * Update shadow registers to configure period and
+		 * compare values. This helps current PWM period to
+		 * complete on reconfiguring
+		 */
+		writel(duty_cycles, pc->mmio_base + CAP4);
+		writel(period_cycles, pc->mmio_base + CAP3);
+	}
+
+	if (!enabled) {
+		value = readw(pc->mmio_base + ECCTL2);
+		/* Disable APWM mode to put APWM output Low */
+		value &= ~ECCTL2_APWM_MODE;
+		writew(value, pc->mmio_base + ECCTL2);
+	}
+
+	pm_runtime_put_sync(pc->chip.dev);
+
+	return 0;
+}
+
+static int ecap_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
+				 enum pwm_polarity polarity)
+{
+	struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
+	u16 value;
+
+	pm_runtime_get_sync(pc->chip.dev);
+
+	value = readw(pc->mmio_base + ECCTL2);
+
+	if (polarity == PWM_POLARITY_INVERSED)
+		/* Duty cycle defines LOW period of PWM */
+		value |= ECCTL2_APWM_POL_LOW;
+	else
+		/* Duty cycle defines HIGH period of PWM */
+		value &= ~ECCTL2_APWM_POL_LOW;
+
+	writew(value, pc->mmio_base + ECCTL2);
+
+	pm_runtime_put_sync(pc->chip.dev);
+
+	return 0;
+}
+
+static int ecap_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
+	u16 value;
+
+	/* Leave clock enabled on enabling PWM */
+	pm_runtime_get_sync(pc->chip.dev);
+
+	/*
+	 * Enable 'Free run Time stamp counter mode' to start counter
+	 * and  'APWM mode' to enable APWM output
+	 */
+	value = readw(pc->mmio_base + ECCTL2);
+	value |= ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE;
+	writew(value, pc->mmio_base + ECCTL2);
+
+	return 0;
+}
+
+static void ecap_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
+	u16 value;
+
+	/*
+	 * Disable 'Free run Time stamp counter mode' to stop counter
+	 * and 'APWM mode' to put APWM output to low
+	 */
+	value = readw(pc->mmio_base + ECCTL2);
+	value &= ~(ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE);
+	writew(value, pc->mmio_base + ECCTL2);
+
+	/* Disable clock on PWM disable */
+	pm_runtime_put_sync(pc->chip.dev);
+}
+
+static int ecap_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			  const struct pwm_state *state)
+{
+	int err;
+	int enabled = pwm->state.enabled;
+
+	if (state->polarity != pwm->state.polarity) {
+
+		if (enabled) {
+			ecap_pwm_disable(chip, pwm);
+			enabled = false;
+		}
+
+		err = ecap_pwm_set_polarity(chip, pwm, state->polarity);
+		if (err)
+			return err;
+	}
+
+	if (!state->enabled) {
+		if (enabled)
+			ecap_pwm_disable(chip, pwm);
+		return 0;
+	}
+
+	if (state->period > NSEC_PER_SEC)
+		return -ERANGE;
+
+	err = ecap_pwm_config(chip, pwm, state->duty_cycle,
+			      state->period, enabled);
+	if (err)
+		return err;
+
+	if (!enabled)
+		return ecap_pwm_enable(chip, pwm);
+
+	return 0;
+}
+
+static const struct pwm_ops ecap_pwm_ops = {
+	.apply = ecap_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static const struct of_device_id ecap_of_match[] = {
+	{ .compatible	= "ti,am3352-ecap" },
+	{ .compatible	= "ti,am33xx-ecap" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ecap_of_match);
+
+static int ecap_pwm_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct ecap_pwm_chip *pc;
+	struct clk *clk;
+	int ret;
+
+	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
+	if (!pc)
+		return -ENOMEM;
+
+	clk = devm_clk_get(&pdev->dev, "fck");
+	if (IS_ERR(clk)) {
+		if (of_device_is_compatible(np, "ti,am33xx-ecap")) {
+			dev_warn(&pdev->dev, "Binding is obsolete.\n");
+			clk = devm_clk_get(pdev->dev.parent, "fck");
+		}
+	}
+
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		return PTR_ERR(clk);
+	}
+
+	pc->clk_rate = clk_get_rate(clk);
+	if (!pc->clk_rate) {
+		dev_err(&pdev->dev, "failed to get clock rate\n");
+		return -EINVAL;
+	}
+
+	pc->chip.dev = &pdev->dev;
+	pc->chip.ops = &ecap_pwm_ops;
+	pc->chip.npwm = 1;
+
+	pc->mmio_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(pc->mmio_base))
+		return PTR_ERR(pc->mmio_base);
+
+	ret = devm_pwmchip_add(&pdev->dev, &pc->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, pc);
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+}
+
+static int ecap_pwm_remove(struct platform_device *pdev)
+{
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void ecap_pwm_save_context(struct ecap_pwm_chip *pc)
+{
+	pm_runtime_get_sync(pc->chip.dev);
+	pc->ctx.ecctl2 = readw(pc->mmio_base + ECCTL2);
+	pc->ctx.cap4 = readl(pc->mmio_base + CAP4);
+	pc->ctx.cap3 = readl(pc->mmio_base + CAP3);
+	pm_runtime_put_sync(pc->chip.dev);
+}
+
+static void ecap_pwm_restore_context(struct ecap_pwm_chip *pc)
+{
+	writel(pc->ctx.cap3, pc->mmio_base + CAP3);
+	writel(pc->ctx.cap4, pc->mmio_base + CAP4);
+	writew(pc->ctx.ecctl2, pc->mmio_base + ECCTL2);
+}
+
+static int ecap_pwm_suspend(struct device *dev)
+{
+	struct ecap_pwm_chip *pc = dev_get_drvdata(dev);
+	struct pwm_device *pwm = pc->chip.pwms;
+
+	ecap_pwm_save_context(pc);
+
+	/* Disable explicitly if PWM is running */
+	if (pwm_is_enabled(pwm))
+		pm_runtime_put_sync(dev);
+
+	return 0;
+}
+
+static int ecap_pwm_resume(struct device *dev)
+{
+	struct ecap_pwm_chip *pc = dev_get_drvdata(dev);
+	struct pwm_device *pwm = pc->chip.pwms;
+
+	/* Enable explicitly if PWM was running */
+	if (pwm_is_enabled(pwm))
+		pm_runtime_get_sync(dev);
+
+	ecap_pwm_restore_context(pc);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ecap_pwm_pm_ops, ecap_pwm_suspend, ecap_pwm_resume);
+
+static struct platform_driver ecap_pwm_driver = {
+	.driver = {
+		.name = "ecap",
+		.of_match_table = ecap_of_match,
+		.pm = &ecap_pwm_pm_ops,
+	},
+	.probe = ecap_pwm_probe,
+	.remove = ecap_pwm_remove,
+};
+module_platform_driver(ecap_pwm_driver);
+
+MODULE_DESCRIPTION("ECAP PWM driver");
+MODULE_AUTHOR("Texas Instruments");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c
new file mode 100644
index 000000000..48ca0ff69
--- /dev/null
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -0,0 +1,613 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * EHRPWM PWM driver
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc. - https://www.ti.com/
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/pm_runtime.h>
+#include <linux/of_device.h>
+
+/* EHRPWM registers and bits definitions */
+
+/* Time base module registers */
+#define TBCTL			0x00
+#define TBPRD			0x0A
+
+#define TBCTL_PRDLD_MASK	BIT(3)
+#define TBCTL_PRDLD_SHDW	0
+#define TBCTL_PRDLD_IMDT	BIT(3)
+#define TBCTL_CLKDIV_MASK	(BIT(12) | BIT(11) | BIT(10) | BIT(9) | \
+				BIT(8) | BIT(7))
+#define TBCTL_CTRMODE_MASK	(BIT(1) | BIT(0))
+#define TBCTL_CTRMODE_UP	0
+#define TBCTL_CTRMODE_DOWN	BIT(0)
+#define TBCTL_CTRMODE_UPDOWN	BIT(1)
+#define TBCTL_CTRMODE_FREEZE	(BIT(1) | BIT(0))
+
+#define TBCTL_HSPCLKDIV_SHIFT	7
+#define TBCTL_CLKDIV_SHIFT	10
+
+#define CLKDIV_MAX		7
+#define HSPCLKDIV_MAX		7
+#define PERIOD_MAX		0xFFFF
+
+/* compare module registers */
+#define CMPA			0x12
+#define CMPB			0x14
+
+/* Action qualifier module registers */
+#define AQCTLA			0x16
+#define AQCTLB			0x18
+#define AQSFRC			0x1A
+#define AQCSFRC			0x1C
+
+#define AQCTL_CBU_MASK		(BIT(9) | BIT(8))
+#define AQCTL_CBU_FRCLOW	BIT(8)
+#define AQCTL_CBU_FRCHIGH	BIT(9)
+#define AQCTL_CBU_FRCTOGGLE	(BIT(9) | BIT(8))
+#define AQCTL_CAU_MASK		(BIT(5) | BIT(4))
+#define AQCTL_CAU_FRCLOW	BIT(4)
+#define AQCTL_CAU_FRCHIGH	BIT(5)
+#define AQCTL_CAU_FRCTOGGLE	(BIT(5) | BIT(4))
+#define AQCTL_PRD_MASK		(BIT(3) | BIT(2))
+#define AQCTL_PRD_FRCLOW	BIT(2)
+#define AQCTL_PRD_FRCHIGH	BIT(3)
+#define AQCTL_PRD_FRCTOGGLE	(BIT(3) | BIT(2))
+#define AQCTL_ZRO_MASK		(BIT(1) | BIT(0))
+#define AQCTL_ZRO_FRCLOW	BIT(0)
+#define AQCTL_ZRO_FRCHIGH	BIT(1)
+#define AQCTL_ZRO_FRCTOGGLE	(BIT(1) | BIT(0))
+
+#define AQCTL_CHANA_POLNORMAL	(AQCTL_CAU_FRCLOW | AQCTL_PRD_FRCHIGH | \
+				AQCTL_ZRO_FRCHIGH)
+#define AQCTL_CHANA_POLINVERSED	(AQCTL_CAU_FRCHIGH | AQCTL_PRD_FRCLOW | \
+				AQCTL_ZRO_FRCLOW)
+#define AQCTL_CHANB_POLNORMAL	(AQCTL_CBU_FRCLOW | AQCTL_PRD_FRCHIGH | \
+				AQCTL_ZRO_FRCHIGH)
+#define AQCTL_CHANB_POLINVERSED	(AQCTL_CBU_FRCHIGH | AQCTL_PRD_FRCLOW | \
+				AQCTL_ZRO_FRCLOW)
+
+#define AQSFRC_RLDCSF_MASK	(BIT(7) | BIT(6))
+#define AQSFRC_RLDCSF_ZRO	0
+#define AQSFRC_RLDCSF_PRD	BIT(6)
+#define AQSFRC_RLDCSF_ZROPRD	BIT(7)
+#define AQSFRC_RLDCSF_IMDT	(BIT(7) | BIT(6))
+
+#define AQCSFRC_CSFB_MASK	(BIT(3) | BIT(2))
+#define AQCSFRC_CSFB_FRCDIS	0
+#define AQCSFRC_CSFB_FRCLOW	BIT(2)
+#define AQCSFRC_CSFB_FRCHIGH	BIT(3)
+#define AQCSFRC_CSFB_DISSWFRC	(BIT(3) | BIT(2))
+#define AQCSFRC_CSFA_MASK	(BIT(1) | BIT(0))
+#define AQCSFRC_CSFA_FRCDIS	0
+#define AQCSFRC_CSFA_FRCLOW	BIT(0)
+#define AQCSFRC_CSFA_FRCHIGH	BIT(1)
+#define AQCSFRC_CSFA_DISSWFRC	(BIT(1) | BIT(0))
+
+#define NUM_PWM_CHANNEL		2	/* EHRPWM channels */
+
+struct ehrpwm_context {
+	u16 tbctl;
+	u16 tbprd;
+	u16 cmpa;
+	u16 cmpb;
+	u16 aqctla;
+	u16 aqctlb;
+	u16 aqsfrc;
+	u16 aqcsfrc;
+};
+
+struct ehrpwm_pwm_chip {
+	struct pwm_chip chip;
+	unsigned long clk_rate;
+	void __iomem *mmio_base;
+	unsigned long period_cycles[NUM_PWM_CHANNEL];
+	enum pwm_polarity polarity[NUM_PWM_CHANNEL];
+	struct clk *tbclk;
+	struct ehrpwm_context ctx;
+};
+
+static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct ehrpwm_pwm_chip, chip);
+}
+
+static inline u16 ehrpwm_read(void __iomem *base, unsigned int offset)
+{
+	return readw(base + offset);
+}
+
+static inline void ehrpwm_write(void __iomem *base, unsigned int offset,
+				u16 value)
+{
+	writew(value, base + offset);
+}
+
+static void ehrpwm_modify(void __iomem *base, unsigned int offset, u16 mask,
+			  u16 value)
+{
+	unsigned short val;
+
+	val = readw(base + offset);
+	val &= ~mask;
+	val |= value & mask;
+	writew(val, base + offset);
+}
+
+/**
+ * set_prescale_div -	Set up the prescaler divider function
+ * @rqst_prescaler:	prescaler value min
+ * @prescale_div:	prescaler value set
+ * @tb_clk_div:		Time Base Control prescaler bits
+ */
+static int set_prescale_div(unsigned long rqst_prescaler, u16 *prescale_div,
+			    u16 *tb_clk_div)
+{
+	unsigned int clkdiv, hspclkdiv;
+
+	for (clkdiv = 0; clkdiv <= CLKDIV_MAX; clkdiv++) {
+		for (hspclkdiv = 0; hspclkdiv <= HSPCLKDIV_MAX; hspclkdiv++) {
+			/*
+			 * calculations for prescaler value :
+			 * prescale_div = HSPCLKDIVIDER * CLKDIVIDER.
+			 * HSPCLKDIVIDER =  2 ** hspclkdiv
+			 * CLKDIVIDER = (1),		if clkdiv == 0 *OR*
+			 *		(2 * clkdiv),	if clkdiv != 0
+			 *
+			 * Configure prescale_div value such that period
+			 * register value is less than 65535.
+			 */
+
+			*prescale_div = (1 << clkdiv) *
+					(hspclkdiv ? (hspclkdiv * 2) : 1);
+			if (*prescale_div > rqst_prescaler) {
+				*tb_clk_div = (clkdiv << TBCTL_CLKDIV_SHIFT) |
+					(hspclkdiv << TBCTL_HSPCLKDIV_SHIFT);
+				return 0;
+			}
+		}
+	}
+
+	return 1;
+}
+
+static void configure_polarity(struct ehrpwm_pwm_chip *pc, int chan)
+{
+	u16 aqctl_val, aqctl_mask;
+	unsigned int aqctl_reg;
+
+	/*
+	 * Configure PWM output to HIGH/LOW level on counter
+	 * reaches compare register value and LOW/HIGH level
+	 * on counter value reaches period register value and
+	 * zero value on counter
+	 */
+	if (chan == 1) {
+		aqctl_reg = AQCTLB;
+		aqctl_mask = AQCTL_CBU_MASK;
+
+		if (pc->polarity[chan] == PWM_POLARITY_INVERSED)
+			aqctl_val = AQCTL_CHANB_POLINVERSED;
+		else
+			aqctl_val = AQCTL_CHANB_POLNORMAL;
+	} else {
+		aqctl_reg = AQCTLA;
+		aqctl_mask = AQCTL_CAU_MASK;
+
+		if (pc->polarity[chan] == PWM_POLARITY_INVERSED)
+			aqctl_val = AQCTL_CHANA_POLINVERSED;
+		else
+			aqctl_val = AQCTL_CHANA_POLNORMAL;
+	}
+
+	aqctl_mask |= AQCTL_PRD_MASK | AQCTL_ZRO_MASK;
+	ehrpwm_modify(pc->mmio_base, aqctl_reg, aqctl_mask, aqctl_val);
+}
+
+/*
+ * period_ns = 10^9 * (ps_divval * period_cycles) / PWM_CLK_RATE
+ * duty_ns   = 10^9 * (ps_divval * duty_cycles) / PWM_CLK_RATE
+ */
+static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			     u64 duty_ns, u64 period_ns)
+{
+	struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
+	u32 period_cycles, duty_cycles;
+	u16 ps_divval, tb_divval;
+	unsigned int i, cmp_reg;
+	unsigned long long c;
+
+	if (period_ns > NSEC_PER_SEC)
+		return -ERANGE;
+
+	c = pc->clk_rate;
+	c = c * period_ns;
+	do_div(c, NSEC_PER_SEC);
+	period_cycles = (unsigned long)c;
+
+	if (period_cycles < 1) {
+		period_cycles = 1;
+		duty_cycles = 1;
+	} else {
+		c = pc->clk_rate;
+		c = c * duty_ns;
+		do_div(c, NSEC_PER_SEC);
+		duty_cycles = (unsigned long)c;
+	}
+
+	/*
+	 * Period values should be same for multiple PWM channels as IP uses
+	 * same period register for multiple channels.
+	 */
+	for (i = 0; i < NUM_PWM_CHANNEL; i++) {
+		if (pc->period_cycles[i] &&
+				(pc->period_cycles[i] != period_cycles)) {
+			/*
+			 * Allow channel to reconfigure period if no other
+			 * channels being configured.
+			 */
+			if (i == pwm->hwpwm)
+				continue;
+
+			dev_err(chip->dev,
+				"period value conflicts with channel %u\n",
+				i);
+			return -EINVAL;
+		}
+	}
+
+	pc->period_cycles[pwm->hwpwm] = period_cycles;
+
+	/* Configure clock prescaler to support Low frequency PWM wave */
+	if (set_prescale_div(period_cycles/PERIOD_MAX, &ps_divval,
+			     &tb_divval)) {
+		dev_err(chip->dev, "Unsupported values\n");
+		return -EINVAL;
+	}
+
+	pm_runtime_get_sync(chip->dev);
+
+	/* Update clock prescaler values */
+	ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_CLKDIV_MASK, tb_divval);
+
+	/* Update period & duty cycle with presacler division */
+	period_cycles = period_cycles / ps_divval;
+	duty_cycles = duty_cycles / ps_divval;
+
+	/* Configure shadow loading on Period register */
+	ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_PRDLD_MASK, TBCTL_PRDLD_SHDW);
+
+	ehrpwm_write(pc->mmio_base, TBPRD, period_cycles);
+
+	/* Configure ehrpwm counter for up-count mode */
+	ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_CTRMODE_MASK,
+		      TBCTL_CTRMODE_UP);
+
+	if (pwm->hwpwm == 1)
+		/* Channel 1 configured with compare B register */
+		cmp_reg = CMPB;
+	else
+		/* Channel 0 configured with compare A register */
+		cmp_reg = CMPA;
+
+	ehrpwm_write(pc->mmio_base, cmp_reg, duty_cycles);
+
+	pm_runtime_put_sync(chip->dev);
+
+	return 0;
+}
+
+static int ehrpwm_pwm_set_polarity(struct pwm_chip *chip,
+				   struct pwm_device *pwm,
+				   enum pwm_polarity polarity)
+{
+	struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
+
+	/* Configuration of polarity in hardware delayed, do at enable */
+	pc->polarity[pwm->hwpwm] = polarity;
+
+	return 0;
+}
+
+static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
+	u16 aqcsfrc_val, aqcsfrc_mask;
+	int ret;
+
+	/* Leave clock enabled on enabling PWM */
+	pm_runtime_get_sync(chip->dev);
+
+	/* Disabling Action Qualifier on PWM output */
+	if (pwm->hwpwm) {
+		aqcsfrc_val = AQCSFRC_CSFB_FRCDIS;
+		aqcsfrc_mask = AQCSFRC_CSFB_MASK;
+	} else {
+		aqcsfrc_val = AQCSFRC_CSFA_FRCDIS;
+		aqcsfrc_mask = AQCSFRC_CSFA_MASK;
+	}
+
+	/* Changes to shadow mode */
+	ehrpwm_modify(pc->mmio_base, AQSFRC, AQSFRC_RLDCSF_MASK,
+		      AQSFRC_RLDCSF_ZRO);
+
+	ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val);
+
+	/* Channels polarity can be configured from action qualifier module */
+	configure_polarity(pc, pwm->hwpwm);
+
+	/* Enable TBCLK */
+	ret = clk_enable(pc->tbclk);
+	if (ret) {
+		dev_err(chip->dev, "Failed to enable TBCLK for %s: %d\n",
+			dev_name(pc->chip.dev), ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void ehrpwm_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
+	u16 aqcsfrc_val, aqcsfrc_mask;
+
+	/* Action Qualifier puts PWM output low forcefully */
+	if (pwm->hwpwm) {
+		aqcsfrc_val = AQCSFRC_CSFB_FRCLOW;
+		aqcsfrc_mask = AQCSFRC_CSFB_MASK;
+	} else {
+		aqcsfrc_val = AQCSFRC_CSFA_FRCLOW;
+		aqcsfrc_mask = AQCSFRC_CSFA_MASK;
+	}
+
+	/* Update shadow register first before modifying active register */
+	ehrpwm_modify(pc->mmio_base, AQSFRC, AQSFRC_RLDCSF_MASK,
+		      AQSFRC_RLDCSF_ZRO);
+	ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val);
+	/*
+	 * Changes to immediate action on Action Qualifier. This puts
+	 * Action Qualifier control on PWM output from next TBCLK
+	 */
+	ehrpwm_modify(pc->mmio_base, AQSFRC, AQSFRC_RLDCSF_MASK,
+		      AQSFRC_RLDCSF_IMDT);
+
+	ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val);
+
+	/* Disabling TBCLK on PWM disable */
+	clk_disable(pc->tbclk);
+
+	/* Disable clock on PWM disable */
+	pm_runtime_put_sync(chip->dev);
+}
+
+static void ehrpwm_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
+
+	if (pwm_is_enabled(pwm)) {
+		dev_warn(chip->dev, "Removing PWM device without disabling\n");
+		pm_runtime_put_sync(chip->dev);
+	}
+
+	/* set period value to zero on free */
+	pc->period_cycles[pwm->hwpwm] = 0;
+}
+
+static int ehrpwm_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			    const struct pwm_state *state)
+{
+	int err;
+	bool enabled = pwm->state.enabled;
+
+	if (state->polarity != pwm->state.polarity) {
+		if (enabled) {
+			ehrpwm_pwm_disable(chip, pwm);
+			enabled = false;
+		}
+
+		err = ehrpwm_pwm_set_polarity(chip, pwm, state->polarity);
+		if (err)
+			return err;
+	}
+
+	if (!state->enabled) {
+		if (enabled)
+			ehrpwm_pwm_disable(chip, pwm);
+		return 0;
+	}
+
+	err = ehrpwm_pwm_config(chip, pwm, state->duty_cycle, state->period);
+	if (err)
+		return err;
+
+	if (!enabled)
+		err = ehrpwm_pwm_enable(chip, pwm);
+
+	return err;
+}
+
+static const struct pwm_ops ehrpwm_pwm_ops = {
+	.free = ehrpwm_pwm_free,
+	.apply = ehrpwm_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static const struct of_device_id ehrpwm_of_match[] = {
+	{ .compatible = "ti,am3352-ehrpwm" },
+	{ .compatible = "ti,am33xx-ehrpwm" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ehrpwm_of_match);
+
+static int ehrpwm_pwm_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct ehrpwm_pwm_chip *pc;
+	struct clk *clk;
+	int ret;
+
+	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
+	if (!pc)
+		return -ENOMEM;
+
+	clk = devm_clk_get(&pdev->dev, "fck");
+	if (IS_ERR(clk)) {
+		if (of_device_is_compatible(np, "ti,am33xx-ecap")) {
+			dev_warn(&pdev->dev, "Binding is obsolete.\n");
+			clk = devm_clk_get(pdev->dev.parent, "fck");
+		}
+	}
+
+	if (IS_ERR(clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(clk), "Failed to get fck\n");
+
+	pc->clk_rate = clk_get_rate(clk);
+	if (!pc->clk_rate) {
+		dev_err(&pdev->dev, "failed to get clock rate\n");
+		return -EINVAL;
+	}
+
+	pc->chip.dev = &pdev->dev;
+	pc->chip.ops = &ehrpwm_pwm_ops;
+	pc->chip.npwm = NUM_PWM_CHANNEL;
+
+	pc->mmio_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(pc->mmio_base))
+		return PTR_ERR(pc->mmio_base);
+
+	/* Acquire tbclk for Time Base EHRPWM submodule */
+	pc->tbclk = devm_clk_get(&pdev->dev, "tbclk");
+	if (IS_ERR(pc->tbclk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(pc->tbclk), "Failed to get tbclk\n");
+
+	ret = clk_prepare(pc->tbclk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "clk_prepare() failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = pwmchip_add(&pc->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+		goto err_clk_unprepare;
+	}
+
+	platform_set_drvdata(pdev, pc);
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+
+err_clk_unprepare:
+	clk_unprepare(pc->tbclk);
+
+	return ret;
+}
+
+static int ehrpwm_pwm_remove(struct platform_device *pdev)
+{
+	struct ehrpwm_pwm_chip *pc = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&pc->chip);
+
+	clk_unprepare(pc->tbclk);
+
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void ehrpwm_pwm_save_context(struct ehrpwm_pwm_chip *pc)
+{
+	pm_runtime_get_sync(pc->chip.dev);
+
+	pc->ctx.tbctl = ehrpwm_read(pc->mmio_base, TBCTL);
+	pc->ctx.tbprd = ehrpwm_read(pc->mmio_base, TBPRD);
+	pc->ctx.cmpa = ehrpwm_read(pc->mmio_base, CMPA);
+	pc->ctx.cmpb = ehrpwm_read(pc->mmio_base, CMPB);
+	pc->ctx.aqctla = ehrpwm_read(pc->mmio_base, AQCTLA);
+	pc->ctx.aqctlb = ehrpwm_read(pc->mmio_base, AQCTLB);
+	pc->ctx.aqsfrc = ehrpwm_read(pc->mmio_base, AQSFRC);
+	pc->ctx.aqcsfrc = ehrpwm_read(pc->mmio_base, AQCSFRC);
+
+	pm_runtime_put_sync(pc->chip.dev);
+}
+
+static void ehrpwm_pwm_restore_context(struct ehrpwm_pwm_chip *pc)
+{
+	ehrpwm_write(pc->mmio_base, TBPRD, pc->ctx.tbprd);
+	ehrpwm_write(pc->mmio_base, CMPA, pc->ctx.cmpa);
+	ehrpwm_write(pc->mmio_base, CMPB, pc->ctx.cmpb);
+	ehrpwm_write(pc->mmio_base, AQCTLA, pc->ctx.aqctla);
+	ehrpwm_write(pc->mmio_base, AQCTLB, pc->ctx.aqctlb);
+	ehrpwm_write(pc->mmio_base, AQSFRC, pc->ctx.aqsfrc);
+	ehrpwm_write(pc->mmio_base, AQCSFRC, pc->ctx.aqcsfrc);
+	ehrpwm_write(pc->mmio_base, TBCTL, pc->ctx.tbctl);
+}
+
+static int ehrpwm_pwm_suspend(struct device *dev)
+{
+	struct ehrpwm_pwm_chip *pc = dev_get_drvdata(dev);
+	unsigned int i;
+
+	ehrpwm_pwm_save_context(pc);
+
+	for (i = 0; i < pc->chip.npwm; i++) {
+		struct pwm_device *pwm = &pc->chip.pwms[i];
+
+		if (!pwm_is_enabled(pwm))
+			continue;
+
+		/* Disable explicitly if PWM is running */
+		pm_runtime_put_sync(dev);
+	}
+
+	return 0;
+}
+
+static int ehrpwm_pwm_resume(struct device *dev)
+{
+	struct ehrpwm_pwm_chip *pc = dev_get_drvdata(dev);
+	unsigned int i;
+
+	for (i = 0; i < pc->chip.npwm; i++) {
+		struct pwm_device *pwm = &pc->chip.pwms[i];
+
+		if (!pwm_is_enabled(pwm))
+			continue;
+
+		/* Enable explicitly if PWM was running */
+		pm_runtime_get_sync(dev);
+	}
+
+	ehrpwm_pwm_restore_context(pc);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ehrpwm_pwm_pm_ops, ehrpwm_pwm_suspend,
+			 ehrpwm_pwm_resume);
+
+static struct platform_driver ehrpwm_pwm_driver = {
+	.driver = {
+		.name = "ehrpwm",
+		.of_match_table = ehrpwm_of_match,
+		.pm = &ehrpwm_pwm_pm_ops,
+	},
+	.probe = ehrpwm_pwm_probe,
+	.remove = ehrpwm_pwm_remove,
+};
+module_platform_driver(ehrpwm_pwm_driver);
+
+MODULE_DESCRIPTION("EHRPWM PWM driver");
+MODULE_AUTHOR("Texas Instruments");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-twl-led.c b/drivers/pwm/pwm-twl-led.c
new file mode 100644
index 000000000..8fb84b441
--- /dev/null
+++ b/drivers/pwm/pwm-twl-led.c
@@ -0,0 +1,392 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for TWL4030/6030 Pulse Width Modulator used as LED driver
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ *
+ * This driver is a complete rewrite of the former pwm-twl6030.c authorded by:
+ * Hemanth V <hemanthv@ti.com>
+ *
+ * Reference manual for the twl6030 is available at:
+ * https://www.ti.com/lit/ds/symlink/twl6030.pdf
+ *
+ * Limitations:
+ * - The twl6030 hardware only supports two period lengths (128 clock ticks and
+ *   64 clock ticks), the driver only uses 128 ticks
+ * - The hardware doesn't support ON = 0, so the active part of a period doesn't
+ *   start at its beginning.
+ * - The hardware could support inverted polarity (with a similar limitation as
+ *   for normal: the last clock tick is always inactive).
+ * - The hardware emits a constant low output when disabled.
+ * - A request for .duty_cycle = 0 results in an output wave with one active
+ *   clock tick per period. This should better use the disabled state.
+ * - The driver only implements setting the relative duty cycle.
+ * - The driver doesn't implement .get_state().
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/mfd/twl.h>
+#include <linux/slab.h>
+
+/*
+ * This driver handles the PWM driven LED terminals of TWL4030 and TWL6030.
+ * To generate the signal on TWL4030:
+ *  - LEDA uses PWMA
+ *  - LEDB uses PWMB
+ * TWL6030 has one LED pin with dedicated LEDPWM
+ */
+
+#define TWL4030_LED_MAX		0x7f
+#define TWL6030_LED_MAX		0xff
+
+/* Registers, bits and macro for TWL4030 */
+#define TWL4030_LEDEN_REG	0x00
+#define TWL4030_PWMA_REG	0x01
+
+#define TWL4030_LEDXON		(1 << 0)
+#define TWL4030_LEDXPWM		(1 << 4)
+#define TWL4030_LED_PINS	(TWL4030_LEDXON | TWL4030_LEDXPWM)
+#define TWL4030_LED_TOGGLE(led, x)	((x) << (led))
+
+/* Register, bits and macro for TWL6030 */
+#define TWL6030_LED_PWM_CTRL1	0xf4
+#define TWL6030_LED_PWM_CTRL2	0xf5
+
+#define TWL6040_LED_MODE_HW	0x00
+#define TWL6040_LED_MODE_ON	0x01
+#define TWL6040_LED_MODE_OFF	0x02
+#define TWL6040_LED_MODE_MASK	0x03
+
+struct twl_pwmled_chip {
+	struct pwm_chip chip;
+	struct mutex mutex;
+};
+
+static inline struct twl_pwmled_chip *to_twl(struct pwm_chip *chip)
+{
+	return container_of(chip, struct twl_pwmled_chip, chip);
+}
+
+static int twl4030_pwmled_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			      int duty_ns, int period_ns)
+{
+	int duty_cycle = DIV_ROUND_UP(duty_ns * TWL4030_LED_MAX, period_ns) + 1;
+	u8 pwm_config[2] = { 1, 0 };
+	int base, ret;
+
+	/*
+	 * To configure the duty period:
+	 * On-cycle is set to 1 (the minimum allowed value)
+	 * The off time of 0 is not configurable, so the mapping is:
+	 * 0 -> off cycle = 2,
+	 * 1 -> off cycle = 2,
+	 * 2 -> off cycle = 3,
+	 * 126 - > off cycle 127,
+	 * 127 - > off cycle 1
+	 * When on cycle == off cycle the PWM will be always on
+	 */
+	if (duty_cycle == 1)
+		duty_cycle = 2;
+	else if (duty_cycle > TWL4030_LED_MAX)
+		duty_cycle = 1;
+
+	base = pwm->hwpwm * 2 + TWL4030_PWMA_REG;
+
+	pwm_config[1] = duty_cycle;
+
+	ret = twl_i2c_write(TWL4030_MODULE_LED, pwm_config, base, 2);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label);
+
+	return ret;
+}
+
+static int twl4030_pwmled_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct twl_pwmled_chip *twl = to_twl(chip);
+	int ret;
+	u8 val;
+
+	mutex_lock(&twl->mutex);
+	ret = twl_i2c_read_u8(TWL4030_MODULE_LED, &val, TWL4030_LEDEN_REG);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to read LEDEN\n", pwm->label);
+		goto out;
+	}
+
+	val |= TWL4030_LED_TOGGLE(pwm->hwpwm, TWL4030_LED_PINS);
+
+	ret = twl_i2c_write_u8(TWL4030_MODULE_LED, val, TWL4030_LEDEN_REG);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
+
+out:
+	mutex_unlock(&twl->mutex);
+	return ret;
+}
+
+static void twl4030_pwmled_disable(struct pwm_chip *chip,
+				   struct pwm_device *pwm)
+{
+	struct twl_pwmled_chip *twl = to_twl(chip);
+	int ret;
+	u8 val;
+
+	mutex_lock(&twl->mutex);
+	ret = twl_i2c_read_u8(TWL4030_MODULE_LED, &val, TWL4030_LEDEN_REG);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to read LEDEN\n", pwm->label);
+		goto out;
+	}
+
+	val &= ~TWL4030_LED_TOGGLE(pwm->hwpwm, TWL4030_LED_PINS);
+
+	ret = twl_i2c_write_u8(TWL4030_MODULE_LED, val, TWL4030_LEDEN_REG);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+
+out:
+	mutex_unlock(&twl->mutex);
+}
+
+static int twl4030_pwmled_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+				const struct pwm_state *state)
+{
+	int ret;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		if (pwm->state.enabled)
+			twl4030_pwmled_disable(chip, pwm);
+
+		return 0;
+	}
+
+	/*
+	 * We cannot skip calling ->config even if state->period ==
+	 * pwm->state.period && state->duty_cycle == pwm->state.duty_cycle
+	 * because we might have exited early in the last call to
+	 * pwm_apply_state because of !state->enabled and so the two values in
+	 * pwm->state might not be configured in hardware.
+	 */
+	ret = twl4030_pwmled_config(pwm->chip, pwm,
+				    state->duty_cycle, state->period);
+	if (ret)
+		return ret;
+
+	if (!pwm->state.enabled)
+		ret = twl4030_pwmled_enable(chip, pwm);
+
+	return ret;
+}
+
+
+static const struct pwm_ops twl4030_pwmled_ops = {
+	.apply = twl4030_pwmled_apply,
+	.owner = THIS_MODULE,
+};
+
+static int twl6030_pwmled_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			      int duty_ns, int period_ns)
+{
+	int duty_cycle = (duty_ns * TWL6030_LED_MAX) / period_ns;
+	u8 on_time;
+	int ret;
+
+	on_time = duty_cycle & 0xff;
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, on_time,
+			       TWL6030_LED_PWM_CTRL1);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label);
+
+	return ret;
+}
+
+static int twl6030_pwmled_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct twl_pwmled_chip *twl = to_twl(chip);
+	int ret;
+	u8 val;
+
+	mutex_lock(&twl->mutex);
+	ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
+			pwm->label);
+		goto out;
+	}
+
+	val &= ~TWL6040_LED_MODE_MASK;
+	val |= TWL6040_LED_MODE_ON;
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
+
+out:
+	mutex_unlock(&twl->mutex);
+	return ret;
+}
+
+static void twl6030_pwmled_disable(struct pwm_chip *chip,
+				   struct pwm_device *pwm)
+{
+	struct twl_pwmled_chip *twl = to_twl(chip);
+	int ret;
+	u8 val;
+
+	mutex_lock(&twl->mutex);
+	ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
+			pwm->label);
+		goto out;
+	}
+
+	val &= ~TWL6040_LED_MODE_MASK;
+	val |= TWL6040_LED_MODE_OFF;
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+
+out:
+	mutex_unlock(&twl->mutex);
+}
+
+static int twl6030_pwmled_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+				const struct pwm_state *state)
+{
+	int err;
+
+	if (state->polarity != pwm->state.polarity)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		if (pwm->state.enabled)
+			twl6030_pwmled_disable(chip, pwm);
+
+		return 0;
+	}
+
+	err = twl6030_pwmled_config(pwm->chip, pwm,
+				    state->duty_cycle, state->period);
+	if (err)
+		return err;
+
+	if (!pwm->state.enabled)
+		err = twl6030_pwmled_enable(chip, pwm);
+
+	return err;
+}
+
+static int twl6030_pwmled_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct twl_pwmled_chip *twl = to_twl(chip);
+	int ret;
+	u8 val;
+
+	mutex_lock(&twl->mutex);
+	ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
+			pwm->label);
+		goto out;
+	}
+
+	val &= ~TWL6040_LED_MODE_MASK;
+	val |= TWL6040_LED_MODE_OFF;
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to request PWM\n", pwm->label);
+
+out:
+	mutex_unlock(&twl->mutex);
+	return ret;
+}
+
+static void twl6030_pwmled_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct twl_pwmled_chip *twl = to_twl(chip);
+	int ret;
+	u8 val;
+
+	mutex_lock(&twl->mutex);
+	ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
+			pwm->label);
+		goto out;
+	}
+
+	val &= ~TWL6040_LED_MODE_MASK;
+	val |= TWL6040_LED_MODE_HW;
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to free PWM\n", pwm->label);
+
+out:
+	mutex_unlock(&twl->mutex);
+}
+
+static const struct pwm_ops twl6030_pwmled_ops = {
+	.apply = twl6030_pwmled_apply,
+	.request = twl6030_pwmled_request,
+	.free = twl6030_pwmled_free,
+	.owner = THIS_MODULE,
+};
+
+static int twl_pwmled_probe(struct platform_device *pdev)
+{
+	struct twl_pwmled_chip *twl;
+
+	twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL);
+	if (!twl)
+		return -ENOMEM;
+
+	if (twl_class_is_4030()) {
+		twl->chip.ops = &twl4030_pwmled_ops;
+		twl->chip.npwm = 2;
+	} else {
+		twl->chip.ops = &twl6030_pwmled_ops;
+		twl->chip.npwm = 1;
+	}
+
+	twl->chip.dev = &pdev->dev;
+
+	mutex_init(&twl->mutex);
+
+	return devm_pwmchip_add(&pdev->dev, &twl->chip);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id twl_pwmled_of_match[] = {
+	{ .compatible = "ti,twl4030-pwmled" },
+	{ .compatible = "ti,twl6030-pwmled" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, twl_pwmled_of_match);
+#endif
+
+static struct platform_driver twl_pwmled_driver = {
+	.driver = {
+		.name = "twl-pwmled",
+		.of_match_table = of_match_ptr(twl_pwmled_of_match),
+	},
+	.probe = twl_pwmled_probe,
+};
+module_platform_driver(twl_pwmled_driver);
+
+MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
+MODULE_DESCRIPTION("PWM driver for TWL4030 and TWL6030 LED outputs");
+MODULE_ALIAS("platform:twl-pwmled");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-twl.c b/drivers/pwm/pwm-twl.c
new file mode 100644
index 000000000..86567add7
--- /dev/null
+++ b/drivers/pwm/pwm-twl.c
@@ -0,0 +1,386 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for TWL4030/6030 Generic Pulse Width Modulator
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/mfd/twl.h>
+#include <linux/slab.h>
+
+/*
+ * This driver handles the PWMs of TWL4030 and TWL6030.
+ * The TRM names for the PWMs on TWL4030 are: PWM0, PWM1
+ * TWL6030 also have two PWMs named in the TRM as PWM1, PWM2
+ */
+
+#define TWL_PWM_MAX		0x7f
+
+/* Registers, bits and macro for TWL4030 */
+#define TWL4030_GPBR1_REG	0x0c
+#define TWL4030_PMBR1_REG	0x0d
+
+/* GPBR1 register bits */
+#define TWL4030_PWMXCLK_ENABLE	(1 << 0)
+#define TWL4030_PWMX_ENABLE	(1 << 2)
+#define TWL4030_PWMX_BITS	(TWL4030_PWMX_ENABLE | TWL4030_PWMXCLK_ENABLE)
+#define TWL4030_PWM_TOGGLE(pwm, x)	((x) << (pwm))
+
+/* PMBR1 register bits */
+#define TWL4030_GPIO6_PWM0_MUTE_MASK		(0x03 << 2)
+#define TWL4030_GPIO6_PWM0_MUTE_PWM0		(0x01 << 2)
+#define TWL4030_GPIO7_VIBRASYNC_PWM1_MASK	(0x03 << 4)
+#define TWL4030_GPIO7_VIBRASYNC_PWM1_PWM1	(0x03 << 4)
+
+/* Register, bits and macro for TWL6030 */
+#define TWL6030_TOGGLE3_REG	0x92
+
+#define TWL6030_PWMXR		(1 << 0)
+#define TWL6030_PWMXS		(1 << 1)
+#define TWL6030_PWMXEN		(1 << 2)
+#define TWL6030_PWM_TOGGLE(pwm, x)	((x) << (pwm * 3))
+
+struct twl_pwm_chip {
+	struct pwm_chip chip;
+	struct mutex mutex;
+	u8 twl6030_toggle3;
+	u8 twl4030_pwm_mux;
+};
+
+static inline struct twl_pwm_chip *to_twl(struct pwm_chip *chip)
+{
+	return container_of(chip, struct twl_pwm_chip, chip);
+}
+
+static int twl_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			  u64 duty_ns, u64 period_ns)
+{
+	int duty_cycle = DIV64_U64_ROUND_UP(duty_ns * TWL_PWM_MAX, period_ns) + 1;
+	u8 pwm_config[2] = { 1, 0 };
+	int base, ret;
+
+	/*
+	 * To configure the duty period:
+	 * On-cycle is set to 1 (the minimum allowed value)
+	 * The off time of 0 is not configurable, so the mapping is:
+	 * 0 -> off cycle = 2,
+	 * 1 -> off cycle = 2,
+	 * 2 -> off cycle = 3,
+	 * 126 - > off cycle 127,
+	 * 127 - > off cycle 1
+	 * When on cycle == off cycle the PWM will be always on
+	 */
+	if (duty_cycle == 1)
+		duty_cycle = 2;
+	else if (duty_cycle > TWL_PWM_MAX)
+		duty_cycle = 1;
+
+	base = pwm->hwpwm * 3;
+
+	pwm_config[1] = duty_cycle;
+
+	ret = twl_i2c_write(TWL_MODULE_PWM, pwm_config, base, 2);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label);
+
+	return ret;
+}
+
+static int twl4030_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct twl_pwm_chip *twl = to_twl(chip);
+	int ret;
+	u8 val;
+
+	mutex_lock(&twl->mutex);
+	ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_GPBR1_REG);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to read GPBR1\n", pwm->label);
+		goto out;
+	}
+
+	val |= TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMXCLK_ENABLE);
+
+	ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
+
+	val |= TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMX_ENABLE);
+
+	ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
+
+out:
+	mutex_unlock(&twl->mutex);
+	return ret;
+}
+
+static void twl4030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct twl_pwm_chip *twl = to_twl(chip);
+	int ret;
+	u8 val;
+
+	mutex_lock(&twl->mutex);
+	ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_GPBR1_REG);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to read GPBR1\n", pwm->label);
+		goto out;
+	}
+
+	val &= ~TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMX_ENABLE);
+
+	ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+
+	val &= ~TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMXCLK_ENABLE);
+
+	ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+
+out:
+	mutex_unlock(&twl->mutex);
+}
+
+static int twl4030_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct twl_pwm_chip *twl = to_twl(chip);
+	int ret;
+	u8 val, mask, bits;
+
+	if (pwm->hwpwm == 1) {
+		mask = TWL4030_GPIO7_VIBRASYNC_PWM1_MASK;
+		bits = TWL4030_GPIO7_VIBRASYNC_PWM1_PWM1;
+	} else {
+		mask = TWL4030_GPIO6_PWM0_MUTE_MASK;
+		bits = TWL4030_GPIO6_PWM0_MUTE_PWM0;
+	}
+
+	mutex_lock(&twl->mutex);
+	ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_PMBR1_REG);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to read PMBR1\n", pwm->label);
+		goto out;
+	}
+
+	/* Save the current MUX configuration for the PWM */
+	twl->twl4030_pwm_mux &= ~mask;
+	twl->twl4030_pwm_mux |= (val & mask);
+
+	/* Select PWM functionality */
+	val &= ~mask;
+	val |= bits;
+
+	ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_PMBR1_REG);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to request PWM\n", pwm->label);
+
+out:
+	mutex_unlock(&twl->mutex);
+	return ret;
+}
+
+static void twl4030_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct twl_pwm_chip *twl = to_twl(chip);
+	int ret;
+	u8 val, mask;
+
+	if (pwm->hwpwm == 1)
+		mask = TWL4030_GPIO7_VIBRASYNC_PWM1_MASK;
+	else
+		mask = TWL4030_GPIO6_PWM0_MUTE_MASK;
+
+	mutex_lock(&twl->mutex);
+	ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_PMBR1_REG);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to read PMBR1\n", pwm->label);
+		goto out;
+	}
+
+	/* Restore the MUX configuration for the PWM */
+	val &= ~mask;
+	val |= (twl->twl4030_pwm_mux & mask);
+
+	ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_PMBR1_REG);
+	if (ret < 0)
+		dev_err(chip->dev, "%s: Failed to free PWM\n", pwm->label);
+
+out:
+	mutex_unlock(&twl->mutex);
+}
+
+static int twl6030_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct twl_pwm_chip *twl = to_twl(chip);
+	int ret;
+	u8 val;
+
+	mutex_lock(&twl->mutex);
+	val = twl->twl6030_toggle3;
+	val |= TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXS | TWL6030_PWMXEN);
+	val &= ~TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXR);
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
+		goto out;
+	}
+
+	twl->twl6030_toggle3 = val;
+out:
+	mutex_unlock(&twl->mutex);
+	return ret;
+}
+
+static void twl6030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct twl_pwm_chip *twl = to_twl(chip);
+	int ret;
+	u8 val;
+
+	mutex_lock(&twl->mutex);
+	val = twl->twl6030_toggle3;
+	val |= TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXR);
+	val &= ~TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXS | TWL6030_PWMXEN);
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+		goto out;
+	}
+
+	val |= TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXEN);
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+		goto out;
+	}
+
+	val &= ~TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXEN);
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+		goto out;
+	}
+
+	twl->twl6030_toggle3 = val;
+out:
+	mutex_unlock(&twl->mutex);
+}
+
+static int twl4030_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			     const struct pwm_state *state)
+{
+	int err;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		if (pwm->state.enabled)
+			twl4030_pwm_disable(chip, pwm);
+
+		return 0;
+	}
+
+	err = twl_pwm_config(pwm->chip, pwm, state->duty_cycle, state->period);
+	if (err)
+		return err;
+
+	if (!pwm->state.enabled)
+		err = twl4030_pwm_enable(chip, pwm);
+
+	return err;
+}
+
+static int twl6030_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			     const struct pwm_state *state)
+{
+	int err;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		if (pwm->state.enabled)
+			twl6030_pwm_disable(chip, pwm);
+
+		return 0;
+	}
+
+	err = twl_pwm_config(pwm->chip, pwm, state->duty_cycle, state->period);
+	if (err)
+		return err;
+
+	if (!pwm->state.enabled)
+		err = twl6030_pwm_enable(chip, pwm);
+
+	return err;
+}
+
+static const struct pwm_ops twl4030_pwm_ops = {
+	.apply = twl4030_pwm_apply,
+	.request = twl4030_pwm_request,
+	.free = twl4030_pwm_free,
+	.owner = THIS_MODULE,
+};
+
+static const struct pwm_ops twl6030_pwm_ops = {
+	.apply = twl6030_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static int twl_pwm_probe(struct platform_device *pdev)
+{
+	struct twl_pwm_chip *twl;
+
+	twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL);
+	if (!twl)
+		return -ENOMEM;
+
+	if (twl_class_is_4030())
+		twl->chip.ops = &twl4030_pwm_ops;
+	else
+		twl->chip.ops = &twl6030_pwm_ops;
+
+	twl->chip.dev = &pdev->dev;
+	twl->chip.npwm = 2;
+
+	mutex_init(&twl->mutex);
+
+	return devm_pwmchip_add(&pdev->dev, &twl->chip);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id twl_pwm_of_match[] = {
+	{ .compatible = "ti,twl4030-pwm" },
+	{ .compatible = "ti,twl6030-pwm" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, twl_pwm_of_match);
+#endif
+
+static struct platform_driver twl_pwm_driver = {
+	.driver = {
+		.name = "twl-pwm",
+		.of_match_table = of_match_ptr(twl_pwm_of_match),
+	},
+	.probe = twl_pwm_probe,
+};
+module_platform_driver(twl_pwm_driver);
+
+MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
+MODULE_DESCRIPTION("PWM driver for TWL4030 and TWL6030");
+MODULE_ALIAS("platform:twl-pwm");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-visconti.c b/drivers/pwm/pwm-visconti.c
new file mode 100644
index 000000000..e3fb79b3e
--- /dev/null
+++ b/drivers/pwm/pwm-visconti.c
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Toshiba Visconti pulse-width-modulation controller driver
+ *
+ * Copyright (c) 2020 - 2021 TOSHIBA CORPORATION
+ * Copyright (c) 2020 - 2021 Toshiba Electronic Devices & Storage Corporation
+ *
+ * Authors: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+ *
+ * Limitations:
+ * - The fixed input clock is running at 1 MHz and is divided by either 1,
+ *   2, 4 or 8.
+ * - When the settings of the PWM are modified, the new values are shadowed
+ *   in hardware until the PIPGM_PCSR register is written and the currently
+ *   running period is completed. This way the hardware switches atomically
+ *   from the old setting to the new.
+ * - Disabling the hardware completes the currently running period and keeps
+ *   the output at low level at all times.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+#define PIPGM_PCSR(ch) (0x400 + 4 * (ch))
+#define PIPGM_PDUT(ch) (0x420 + 4 * (ch))
+#define PIPGM_PWMC(ch) (0x440 + 4 * (ch))
+
+#define PIPGM_PWMC_PWMACT		BIT(5)
+#define PIPGM_PWMC_CLK_MASK		GENMASK(1, 0)
+#define PIPGM_PWMC_POLARITY_MASK	GENMASK(5, 5)
+
+struct visconti_pwm_chip {
+	struct pwm_chip chip;
+	void __iomem *base;
+};
+
+static inline struct visconti_pwm_chip *visconti_pwm_from_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct visconti_pwm_chip, chip);
+}
+
+static int visconti_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			      const struct pwm_state *state)
+{
+	struct visconti_pwm_chip *priv = visconti_pwm_from_chip(chip);
+	u32 period, duty_cycle, pwmc0;
+
+	if (!state->enabled) {
+		writel(0, priv->base + PIPGM_PCSR(pwm->hwpwm));
+		return 0;
+	}
+
+	/*
+	 * The biggest period the hardware can provide is
+	 *	(0xffff << 3) * 1000 ns
+	 * This value fits easily in an u32, so simplify the maths by
+	 * capping the values to 32 bit integers.
+	 */
+	if (state->period > (0xffff << 3) * 1000)
+		period = (0xffff << 3) * 1000;
+	else
+		period = state->period;
+
+	if (state->duty_cycle > period)
+		duty_cycle = period;
+	else
+		duty_cycle = state->duty_cycle;
+
+	/*
+	 * The input clock runs fixed at 1 MHz, so we have only
+	 * microsecond resolution and so can divide by
+	 * NSEC_PER_SEC / CLKFREQ = 1000 without losing precision.
+	 */
+	period /= 1000;
+	duty_cycle /= 1000;
+
+	if (!period)
+		return -ERANGE;
+
+	/*
+	 * PWMC controls a divider that divides the input clk by a power of two
+	 * between 1 and 8. As a smaller divider yields higher precision, pick
+	 * the smallest possible one. As period is at most 0xffff << 3, pwmc0 is
+	 * in the intended range [0..3].
+	 */
+	pwmc0 = fls(period >> 16);
+	if (WARN_ON(pwmc0 > 3))
+		return -EINVAL;
+
+	period >>= pwmc0;
+	duty_cycle >>= pwmc0;
+
+	if (state->polarity == PWM_POLARITY_INVERSED)
+		pwmc0 |= PIPGM_PWMC_PWMACT;
+	writel(pwmc0, priv->base + PIPGM_PWMC(pwm->hwpwm));
+	writel(duty_cycle, priv->base + PIPGM_PDUT(pwm->hwpwm));
+	writel(period, priv->base + PIPGM_PCSR(pwm->hwpwm));
+
+	return 0;
+}
+
+static int visconti_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+				  struct pwm_state *state)
+{
+	struct visconti_pwm_chip *priv = visconti_pwm_from_chip(chip);
+	u32 period, duty, pwmc0, pwmc0_clk;
+
+	period = readl(priv->base + PIPGM_PCSR(pwm->hwpwm));
+	duty = readl(priv->base + PIPGM_PDUT(pwm->hwpwm));
+	pwmc0 = readl(priv->base + PIPGM_PWMC(pwm->hwpwm));
+	pwmc0_clk = pwmc0 & PIPGM_PWMC_CLK_MASK;
+
+	state->period = (period << pwmc0_clk) * NSEC_PER_USEC;
+	state->duty_cycle = (duty << pwmc0_clk) * NSEC_PER_USEC;
+	if (pwmc0 & PIPGM_PWMC_POLARITY_MASK)
+		state->polarity = PWM_POLARITY_INVERSED;
+	else
+		state->polarity = PWM_POLARITY_NORMAL;
+
+	state->enabled = true;
+
+	return 0;
+}
+
+static const struct pwm_ops visconti_pwm_ops = {
+	.apply = visconti_pwm_apply,
+	.get_state = visconti_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static int visconti_pwm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct visconti_pwm_chip *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->chip.dev = dev;
+	priv->chip.ops = &visconti_pwm_ops;
+	priv->chip.npwm = 4;
+
+	ret = devm_pwmchip_add(&pdev->dev, &priv->chip);
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret, "Cannot register visconti PWM\n");
+
+	return 0;
+}
+
+static const struct of_device_id visconti_pwm_of_match[] = {
+	{ .compatible = "toshiba,visconti-pwm", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, visconti_pwm_of_match);
+
+static struct platform_driver visconti_pwm_driver = {
+	.driver = {
+		.name = "pwm-visconti",
+		.of_match_table = visconti_pwm_of_match,
+	},
+	.probe = visconti_pwm_probe,
+};
+module_platform_driver(visconti_pwm_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>");
+MODULE_ALIAS("platform:pwm-visconti");
diff --git a/drivers/pwm/pwm-vt8500.c b/drivers/pwm/pwm-vt8500.c
new file mode 100644
index 000000000..f1ff9940b
--- /dev/null
+++ b/drivers/pwm/pwm-vt8500.c
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * drivers/pwm/pwm-vt8500.c
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+
+#include <asm/div64.h>
+
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+
+/*
+ * SoC architecture allocates register space for 4 PWMs but only
+ * 2 are currently implemented.
+ */
+#define VT8500_NR_PWMS	2
+
+#define REG_CTRL(pwm)		(((pwm) << 4) + 0x00)
+#define REG_SCALAR(pwm)		(((pwm) << 4) + 0x04)
+#define REG_PERIOD(pwm)		(((pwm) << 4) + 0x08)
+#define REG_DUTY(pwm)		(((pwm) << 4) + 0x0C)
+#define REG_STATUS		0x40
+
+#define CTRL_ENABLE		BIT(0)
+#define CTRL_INVERT		BIT(1)
+#define CTRL_AUTOLOAD		BIT(2)
+#define CTRL_STOP_IMM		BIT(3)
+#define CTRL_LOAD_PRESCALE	BIT(4)
+#define CTRL_LOAD_PERIOD	BIT(5)
+
+#define STATUS_CTRL_UPDATE	BIT(0)
+#define STATUS_SCALAR_UPDATE	BIT(1)
+#define STATUS_PERIOD_UPDATE	BIT(2)
+#define STATUS_DUTY_UPDATE	BIT(3)
+#define STATUS_ALL_UPDATE	0x0F
+
+struct vt8500_chip {
+	struct pwm_chip chip;
+	void __iomem *base;
+	struct clk *clk;
+};
+
+#define to_vt8500_chip(chip)	container_of(chip, struct vt8500_chip, chip)
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+static inline void vt8500_pwm_busy_wait(struct vt8500_chip *vt8500, int nr, u8 bitmask)
+{
+	int loops = msecs_to_loops(10);
+	u32 mask = bitmask << (nr << 8);
+
+	while ((readl(vt8500->base + REG_STATUS) & mask) && --loops)
+		cpu_relax();
+
+	if (unlikely(!loops))
+		dev_warn(vt8500->chip.dev, "Waiting for status bits 0x%x to clear timed out\n",
+			 mask);
+}
+
+static int vt8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+		u64 duty_ns, u64 period_ns)
+{
+	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
+	unsigned long long c;
+	unsigned long period_cycles, prescale, pv, dc;
+	int err;
+	u32 val;
+
+	err = clk_enable(vt8500->clk);
+	if (err < 0) {
+		dev_err(chip->dev, "failed to enable clock\n");
+		return err;
+	}
+
+	c = clk_get_rate(vt8500->clk);
+	c = c * period_ns;
+	do_div(c, 1000000000);
+	period_cycles = c;
+
+	if (period_cycles < 1)
+		period_cycles = 1;
+	prescale = (period_cycles - 1) / 4096;
+	pv = period_cycles / (prescale + 1) - 1;
+	if (pv > 4095)
+		pv = 4095;
+
+	if (prescale > 1023) {
+		clk_disable(vt8500->clk);
+		return -EINVAL;
+	}
+
+	c = (unsigned long long)pv * duty_ns;
+
+	dc = div64_u64(c, period_ns);
+
+	writel(prescale, vt8500->base + REG_SCALAR(pwm->hwpwm));
+	vt8500_pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_SCALAR_UPDATE);
+
+	writel(pv, vt8500->base + REG_PERIOD(pwm->hwpwm));
+	vt8500_pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_PERIOD_UPDATE);
+
+	writel(dc, vt8500->base + REG_DUTY(pwm->hwpwm));
+	vt8500_pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_DUTY_UPDATE);
+
+	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
+	val |= CTRL_AUTOLOAD;
+	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
+	vt8500_pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);
+
+	clk_disable(vt8500->clk);
+	return 0;
+}
+
+static int vt8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
+	int err;
+	u32 val;
+
+	err = clk_enable(vt8500->clk);
+	if (err < 0) {
+		dev_err(chip->dev, "failed to enable clock\n");
+		return err;
+	}
+
+	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
+	val |= CTRL_ENABLE;
+	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
+	vt8500_pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);
+
+	return 0;
+}
+
+static void vt8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
+	u32 val;
+
+	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
+	val &= ~CTRL_ENABLE;
+	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
+	vt8500_pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);
+
+	clk_disable(vt8500->clk);
+}
+
+static int vt8500_pwm_set_polarity(struct pwm_chip *chip,
+				   struct pwm_device *pwm,
+				   enum pwm_polarity polarity)
+{
+	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
+	u32 val;
+
+	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
+
+	if (polarity == PWM_POLARITY_INVERSED)
+		val |= CTRL_INVERT;
+	else
+		val &= ~CTRL_INVERT;
+
+	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
+	vt8500_pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);
+
+	return 0;
+}
+
+static int vt8500_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			    const struct pwm_state *state)
+{
+	int err;
+	bool enabled = pwm->state.enabled;
+
+	if (state->polarity != pwm->state.polarity) {
+		/*
+		 * Changing the polarity of a running PWM is only allowed when
+		 * the PWM driver implements ->apply().
+		 */
+		if (enabled) {
+			vt8500_pwm_disable(chip, pwm);
+
+			enabled = false;
+		}
+
+		err = vt8500_pwm_set_polarity(chip, pwm, state->polarity);
+		if (err)
+			return err;
+	}
+
+	if (!state->enabled) {
+		if (enabled)
+			vt8500_pwm_disable(chip, pwm);
+
+		return 0;
+	}
+
+	/*
+	 * We cannot skip calling ->config even if state->period ==
+	 * pwm->state.period && state->duty_cycle == pwm->state.duty_cycle
+	 * because we might have exited early in the last call to
+	 * pwm_apply_state because of !state->enabled and so the two values in
+	 * pwm->state might not be configured in hardware.
+	 */
+	err = vt8500_pwm_config(pwm->chip, pwm, state->duty_cycle, state->period);
+	if (err)
+		return err;
+
+	if (!enabled)
+		err = vt8500_pwm_enable(chip, pwm);
+
+	return err;
+}
+
+static const struct pwm_ops vt8500_pwm_ops = {
+	.apply = vt8500_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static const struct of_device_id vt8500_pwm_dt_ids[] = {
+	{ .compatible = "via,vt8500-pwm", },
+	{ /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, vt8500_pwm_dt_ids);
+
+static int vt8500_pwm_probe(struct platform_device *pdev)
+{
+	struct vt8500_chip *vt8500;
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+
+	if (!np) {
+		dev_err(&pdev->dev, "invalid devicetree node\n");
+		return -EINVAL;
+	}
+
+	vt8500 = devm_kzalloc(&pdev->dev, sizeof(*vt8500), GFP_KERNEL);
+	if (vt8500 == NULL)
+		return -ENOMEM;
+
+	vt8500->chip.dev = &pdev->dev;
+	vt8500->chip.ops = &vt8500_pwm_ops;
+	vt8500->chip.npwm = VT8500_NR_PWMS;
+
+	vt8500->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(vt8500->clk)) {
+		dev_err(&pdev->dev, "clock source not specified\n");
+		return PTR_ERR(vt8500->clk);
+	}
+
+	vt8500->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(vt8500->base))
+		return PTR_ERR(vt8500->base);
+
+	ret = clk_prepare(vt8500->clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to prepare clock\n");
+		return ret;
+	}
+
+	ret = pwmchip_add(&vt8500->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add PWM chip\n");
+		clk_unprepare(vt8500->clk);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, vt8500);
+	return ret;
+}
+
+static int vt8500_pwm_remove(struct platform_device *pdev)
+{
+	struct vt8500_chip *vt8500 = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&vt8500->chip);
+
+	clk_unprepare(vt8500->clk);
+
+	return 0;
+}
+
+static struct platform_driver vt8500_pwm_driver = {
+	.probe		= vt8500_pwm_probe,
+	.remove		= vt8500_pwm_remove,
+	.driver		= {
+		.name	= "vt8500-pwm",
+		.of_match_table = vt8500_pwm_dt_ids,
+	},
+};
+module_platform_driver(vt8500_pwm_driver);
+
+MODULE_DESCRIPTION("VT8500 PWM Driver");
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-xilinx.c b/drivers/pwm/pwm-xilinx.c
new file mode 100644
index 000000000..f7a50fdcd
--- /dev/null
+++ b/drivers/pwm/pwm-xilinx.c
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 Sean Anderson <sean.anderson@seco.com>
+ *
+ * Limitations:
+ * - When changing both duty cycle and period, we may end up with one cycle
+ *   with the old duty cycle and the new period. This is because the counters
+ *   may only be reloaded by first stopping them, or by letting them be
+ *   automatically reloaded at the end of a cycle. If this automatic reload
+ *   happens after we set TLR0 but before we set TLR1 then we will have a
+ *   bad cycle. This could probably be fixed by reading TCR0 just before
+ *   reprogramming, but I think it would add complexity for little gain.
+ * - Cannot produce 100% duty cycle by configuring the TLRs. This might be
+ *   possible by stopping the counters at an appropriate point in the cycle,
+ *   but this is not (yet) implemented.
+ * - Only produces "normal" output.
+ * - Always produces low output if disabled.
+ */
+
+#include <clocksource/timer-xilinx.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+
+/*
+ * The following functions are "common" to drivers for this device, and may be
+ * exported at a future date.
+ */
+u32 xilinx_timer_tlr_cycles(struct xilinx_timer_priv *priv, u32 tcsr,
+			    u64 cycles)
+{
+	WARN_ON(cycles < 2 || cycles - 2 > priv->max);
+
+	if (tcsr & TCSR_UDT)
+		return cycles - 2;
+	return priv->max - cycles + 2;
+}
+
+unsigned int xilinx_timer_get_period(struct xilinx_timer_priv *priv,
+				     u32 tlr, u32 tcsr)
+{
+	u64 cycles;
+
+	if (tcsr & TCSR_UDT)
+		cycles = tlr + 2;
+	else
+		cycles = (u64)priv->max - tlr + 2;
+
+	/* cycles has a max of 2^32 + 2, so we can't overflow */
+	return DIV64_U64_ROUND_UP(cycles * NSEC_PER_SEC,
+				  clk_get_rate(priv->clk));
+}
+
+/*
+ * The idea here is to capture whether the PWM is actually running (e.g.
+ * because we or the bootloader set it up) and we need to be careful to ensure
+ * we don't cause a glitch. According to the data sheet, to enable the PWM we
+ * need to
+ *
+ * - Set both timers to generate mode (MDT=1)
+ * - Set both timers to PWM mode (PWMA=1)
+ * - Enable the generate out signals (GENT=1)
+ *
+ * In addition,
+ *
+ * - The timer must be running (ENT=1)
+ * - The timer must auto-reload TLR into TCR (ARHT=1)
+ * - We must not be in the process of loading TLR into TCR (LOAD=0)
+ * - Cascade mode must be disabled (CASC=0)
+ *
+ * If any of these differ from usual, then the PWM is either disabled, or is
+ * running in a mode that this driver does not support.
+ */
+#define TCSR_PWM_SET (TCSR_GENT | TCSR_ARHT | TCSR_ENT | TCSR_PWMA)
+#define TCSR_PWM_CLEAR (TCSR_MDT | TCSR_LOAD)
+#define TCSR_PWM_MASK (TCSR_PWM_SET | TCSR_PWM_CLEAR)
+
+struct xilinx_pwm_device {
+	struct pwm_chip chip;
+	struct xilinx_timer_priv priv;
+};
+
+static inline struct xilinx_timer_priv
+*xilinx_pwm_chip_to_priv(struct pwm_chip *chip)
+{
+	return &container_of(chip, struct xilinx_pwm_device, chip)->priv;
+}
+
+static bool xilinx_timer_pwm_enabled(u32 tcsr0, u32 tcsr1)
+{
+	return ((TCSR_PWM_MASK | TCSR_CASC) & tcsr0) == TCSR_PWM_SET &&
+		(TCSR_PWM_MASK & tcsr1) == TCSR_PWM_SET;
+}
+
+static int xilinx_pwm_apply(struct pwm_chip *chip, struct pwm_device *unused,
+			    const struct pwm_state *state)
+{
+	struct xilinx_timer_priv *priv = xilinx_pwm_chip_to_priv(chip);
+	u32 tlr0, tlr1, tcsr0, tcsr1;
+	u64 period_cycles, duty_cycles;
+	unsigned long rate;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	/*
+	 * To be representable by TLR, cycles must be between 2 and
+	 * priv->max + 2. To enforce this we can reduce the cycles, but we may
+	 * not increase them. Caveat emptor: while this does result in more
+	 * predictable rounding, it may also result in a completely different
+	 * duty cycle (% high time) than what was requested.
+	 */
+	rate = clk_get_rate(priv->clk);
+	/* Avoid overflow */
+	period_cycles = min_t(u64, state->period, U32_MAX * NSEC_PER_SEC);
+	period_cycles = mul_u64_u32_div(period_cycles, rate, NSEC_PER_SEC);
+	period_cycles = min_t(u64, period_cycles, priv->max + 2);
+	if (period_cycles < 2)
+		return -ERANGE;
+
+	/* Same thing for duty cycles */
+	duty_cycles = min_t(u64, state->duty_cycle, U32_MAX * NSEC_PER_SEC);
+	duty_cycles = mul_u64_u32_div(duty_cycles, rate, NSEC_PER_SEC);
+	duty_cycles = min_t(u64, duty_cycles, priv->max + 2);
+
+	/*
+	 * If we specify 100% duty cycle, we will get 0% instead, so decrease
+	 * the duty cycle count by one.
+	 */
+	if (duty_cycles >= period_cycles)
+		duty_cycles = period_cycles - 1;
+
+	/* Round down to 0% duty cycle for unrepresentable duty cycles */
+	if (duty_cycles < 2)
+		duty_cycles = period_cycles;
+
+	regmap_read(priv->map, TCSR0, &tcsr0);
+	regmap_read(priv->map, TCSR1, &tcsr1);
+	tlr0 = xilinx_timer_tlr_cycles(priv, tcsr0, period_cycles);
+	tlr1 = xilinx_timer_tlr_cycles(priv, tcsr1, duty_cycles);
+	regmap_write(priv->map, TLR0, tlr0);
+	regmap_write(priv->map, TLR1, tlr1);
+
+	if (state->enabled) {
+		/*
+		 * If the PWM is already running, then the counters will be
+		 * reloaded at the end of the current cycle.
+		 */
+		if (!xilinx_timer_pwm_enabled(tcsr0, tcsr1)) {
+			/* Load TLR into TCR */
+			regmap_write(priv->map, TCSR0, tcsr0 | TCSR_LOAD);
+			regmap_write(priv->map, TCSR1, tcsr1 | TCSR_LOAD);
+			/* Enable timers all at once with ENALL */
+			tcsr0 = (TCSR_PWM_SET & ~TCSR_ENT) | (tcsr0 & TCSR_UDT);
+			tcsr1 = TCSR_PWM_SET | TCSR_ENALL | (tcsr1 & TCSR_UDT);
+			regmap_write(priv->map, TCSR0, tcsr0);
+			regmap_write(priv->map, TCSR1, tcsr1);
+		}
+	} else {
+		regmap_write(priv->map, TCSR0, 0);
+		regmap_write(priv->map, TCSR1, 0);
+	}
+
+	return 0;
+}
+
+static int xilinx_pwm_get_state(struct pwm_chip *chip,
+				struct pwm_device *unused,
+				struct pwm_state *state)
+{
+	struct xilinx_timer_priv *priv = xilinx_pwm_chip_to_priv(chip);
+	u32 tlr0, tlr1, tcsr0, tcsr1;
+
+	regmap_read(priv->map, TLR0, &tlr0);
+	regmap_read(priv->map, TLR1, &tlr1);
+	regmap_read(priv->map, TCSR0, &tcsr0);
+	regmap_read(priv->map, TCSR1, &tcsr1);
+	state->period = xilinx_timer_get_period(priv, tlr0, tcsr0);
+	state->duty_cycle = xilinx_timer_get_period(priv, tlr1, tcsr1);
+	state->enabled = xilinx_timer_pwm_enabled(tcsr0, tcsr1);
+	state->polarity = PWM_POLARITY_NORMAL;
+
+	/*
+	 * 100% duty cycle results in constant low output. This may be (very)
+	 * wrong if rate > 1 GHz, so fix this if you have such hardware :)
+	 */
+	if (state->period == state->duty_cycle)
+		state->duty_cycle = 0;
+
+	return 0;
+}
+
+static const struct pwm_ops xilinx_pwm_ops = {
+	.apply = xilinx_pwm_apply,
+	.get_state = xilinx_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static const struct regmap_config xilinx_pwm_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
+	.max_register = TCR1,
+};
+
+static int xilinx_pwm_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct xilinx_timer_priv *priv;
+	struct xilinx_pwm_device *xilinx_pwm;
+	u32 pwm_cells, one_timer, width;
+	void __iomem *regs;
+
+	/* If there are no PWM cells, this binding is for a timer */
+	ret = of_property_read_u32(np, "#pwm-cells", &pwm_cells);
+	if (ret == -EINVAL)
+		return -ENODEV;
+	if (ret)
+		return dev_err_probe(dev, ret, "could not read #pwm-cells\n");
+
+	xilinx_pwm = devm_kzalloc(dev, sizeof(*xilinx_pwm), GFP_KERNEL);
+	if (!xilinx_pwm)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, xilinx_pwm);
+	priv = &xilinx_pwm->priv;
+
+	regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	priv->map = devm_regmap_init_mmio(dev, regs,
+					  &xilinx_pwm_regmap_config);
+	if (IS_ERR(priv->map))
+		return dev_err_probe(dev, PTR_ERR(priv->map),
+				     "Could not create regmap\n");
+
+	ret = of_property_read_u32(np, "xlnx,one-timer-only", &one_timer);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Could not read xlnx,one-timer-only\n");
+
+	if (one_timer)
+		return dev_err_probe(dev, -EINVAL,
+				     "Two timers required for PWM mode\n");
+
+	ret = of_property_read_u32(np, "xlnx,count-width", &width);
+	if (ret == -EINVAL)
+		width = 32;
+	else if (ret)
+		return dev_err_probe(dev, ret,
+				     "Could not read xlnx,count-width\n");
+
+	if (width != 8 && width != 16 && width != 32)
+		return dev_err_probe(dev, -EINVAL,
+				     "Invalid counter width %d\n", width);
+	priv->max = BIT_ULL(width) - 1;
+
+	/*
+	 * The polarity of the Generate Out signals must be active high for PWM
+	 * mode to work. We could determine this from the device tree, but
+	 * alas, such properties are not allowed to be used.
+	 */
+
+	priv->clk = devm_clk_get(dev, "s_axi_aclk");
+	if (IS_ERR(priv->clk))
+		return dev_err_probe(dev, PTR_ERR(priv->clk),
+				     "Could not get clock\n");
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return dev_err_probe(dev, ret, "Clock enable failed\n");
+	clk_rate_exclusive_get(priv->clk);
+
+	xilinx_pwm->chip.dev = dev;
+	xilinx_pwm->chip.ops = &xilinx_pwm_ops;
+	xilinx_pwm->chip.npwm = 1;
+	ret = pwmchip_add(&xilinx_pwm->chip);
+	if (ret) {
+		clk_rate_exclusive_put(priv->clk);
+		clk_disable_unprepare(priv->clk);
+		return dev_err_probe(dev, ret, "Could not register PWM chip\n");
+	}
+
+	return 0;
+}
+
+static int xilinx_pwm_remove(struct platform_device *pdev)
+{
+	struct xilinx_pwm_device *xilinx_pwm = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&xilinx_pwm->chip);
+	clk_rate_exclusive_put(xilinx_pwm->priv.clk);
+	clk_disable_unprepare(xilinx_pwm->priv.clk);
+	return 0;
+}
+
+static const struct of_device_id xilinx_pwm_of_match[] = {
+	{ .compatible = "xlnx,xps-timer-1.00.a", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, xilinx_pwm_of_match);
+
+static struct platform_driver xilinx_pwm_driver = {
+	.probe = xilinx_pwm_probe,
+	.remove = xilinx_pwm_remove,
+	.driver = {
+		.name = "xilinx-pwm",
+		.of_match_table = of_match_ptr(xilinx_pwm_of_match),
+	},
+};
+module_platform_driver(xilinx_pwm_driver);
+
+MODULE_ALIAS("platform:xilinx-pwm");
+MODULE_DESCRIPTION("PWM driver for Xilinx LogiCORE IP AXI Timer");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/sysfs.c b/drivers/pwm/sysfs.c
new file mode 100644
index 000000000..ba1252538
--- /dev/null
+++ b/drivers/pwm/sysfs.c
@@ -0,0 +1,546 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * A simple sysfs interface for the generic PWM framework
+ *
+ * Copyright (C) 2013 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * Based on previous work by Lars Poeschel <poeschel@lemonage.de>
+ */
+
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/kdev_t.h>
+#include <linux/pwm.h>
+
+struct pwm_export {
+	struct device child;
+	struct pwm_device *pwm;
+	struct mutex lock;
+	struct pwm_state suspend;
+};
+
+static struct pwm_export *child_to_pwm_export(struct device *child)
+{
+	return container_of(child, struct pwm_export, child);
+}
+
+static struct pwm_device *child_to_pwm_device(struct device *child)
+{
+	struct pwm_export *export = child_to_pwm_export(child);
+
+	return export->pwm;
+}
+
+static ssize_t period_show(struct device *child,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	const struct pwm_device *pwm = child_to_pwm_device(child);
+	struct pwm_state state;
+
+	pwm_get_state(pwm, &state);
+
+	return sysfs_emit(buf, "%llu\n", state.period);
+}
+
+static ssize_t period_store(struct device *child,
+			    struct device_attribute *attr,
+			    const char *buf, size_t size)
+{
+	struct pwm_export *export = child_to_pwm_export(child);
+	struct pwm_device *pwm = export->pwm;
+	struct pwm_state state;
+	u64 val;
+	int ret;
+
+	ret = kstrtou64(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	mutex_lock(&export->lock);
+	pwm_get_state(pwm, &state);
+	state.period = val;
+	ret = pwm_apply_state(pwm, &state);
+	mutex_unlock(&export->lock);
+
+	return ret ? : size;
+}
+
+static ssize_t duty_cycle_show(struct device *child,
+			       struct device_attribute *attr,
+			       char *buf)
+{
+	const struct pwm_device *pwm = child_to_pwm_device(child);
+	struct pwm_state state;
+
+	pwm_get_state(pwm, &state);
+
+	return sysfs_emit(buf, "%llu\n", state.duty_cycle);
+}
+
+static ssize_t duty_cycle_store(struct device *child,
+				struct device_attribute *attr,
+				const char *buf, size_t size)
+{
+	struct pwm_export *export = child_to_pwm_export(child);
+	struct pwm_device *pwm = export->pwm;
+	struct pwm_state state;
+	u64 val;
+	int ret;
+
+	ret = kstrtou64(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	mutex_lock(&export->lock);
+	pwm_get_state(pwm, &state);
+	state.duty_cycle = val;
+	ret = pwm_apply_state(pwm, &state);
+	mutex_unlock(&export->lock);
+
+	return ret ? : size;
+}
+
+static ssize_t enable_show(struct device *child,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	const struct pwm_device *pwm = child_to_pwm_device(child);
+	struct pwm_state state;
+
+	pwm_get_state(pwm, &state);
+
+	return sysfs_emit(buf, "%d\n", state.enabled);
+}
+
+static ssize_t enable_store(struct device *child,
+			    struct device_attribute *attr,
+			    const char *buf, size_t size)
+{
+	struct pwm_export *export = child_to_pwm_export(child);
+	struct pwm_device *pwm = export->pwm;
+	struct pwm_state state;
+	int val, ret;
+
+	ret = kstrtoint(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	mutex_lock(&export->lock);
+
+	pwm_get_state(pwm, &state);
+
+	switch (val) {
+	case 0:
+		state.enabled = false;
+		break;
+	case 1:
+		state.enabled = true;
+		break;
+	default:
+		ret = -EINVAL;
+		goto unlock;
+	}
+
+	ret = pwm_apply_state(pwm, &state);
+
+unlock:
+	mutex_unlock(&export->lock);
+	return ret ? : size;
+}
+
+static ssize_t polarity_show(struct device *child,
+			     struct device_attribute *attr,
+			     char *buf)
+{
+	const struct pwm_device *pwm = child_to_pwm_device(child);
+	const char *polarity = "unknown";
+	struct pwm_state state;
+
+	pwm_get_state(pwm, &state);
+
+	switch (state.polarity) {
+	case PWM_POLARITY_NORMAL:
+		polarity = "normal";
+		break;
+
+	case PWM_POLARITY_INVERSED:
+		polarity = "inversed";
+		break;
+	}
+
+	return sysfs_emit(buf, "%s\n", polarity);
+}
+
+static ssize_t polarity_store(struct device *child,
+			      struct device_attribute *attr,
+			      const char *buf, size_t size)
+{
+	struct pwm_export *export = child_to_pwm_export(child);
+	struct pwm_device *pwm = export->pwm;
+	enum pwm_polarity polarity;
+	struct pwm_state state;
+	int ret;
+
+	if (sysfs_streq(buf, "normal"))
+		polarity = PWM_POLARITY_NORMAL;
+	else if (sysfs_streq(buf, "inversed"))
+		polarity = PWM_POLARITY_INVERSED;
+	else
+		return -EINVAL;
+
+	mutex_lock(&export->lock);
+	pwm_get_state(pwm, &state);
+	state.polarity = polarity;
+	ret = pwm_apply_state(pwm, &state);
+	mutex_unlock(&export->lock);
+
+	return ret ? : size;
+}
+
+static ssize_t capture_show(struct device *child,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	struct pwm_device *pwm = child_to_pwm_device(child);
+	struct pwm_capture result;
+	int ret;
+
+	ret = pwm_capture(pwm, &result, jiffies_to_msecs(HZ));
+	if (ret)
+		return ret;
+
+	return sysfs_emit(buf, "%u %u\n", result.period, result.duty_cycle);
+}
+
+static DEVICE_ATTR_RW(period);
+static DEVICE_ATTR_RW(duty_cycle);
+static DEVICE_ATTR_RW(enable);
+static DEVICE_ATTR_RW(polarity);
+static DEVICE_ATTR_RO(capture);
+
+static struct attribute *pwm_attrs[] = {
+	&dev_attr_period.attr,
+	&dev_attr_duty_cycle.attr,
+	&dev_attr_enable.attr,
+	&dev_attr_polarity.attr,
+	&dev_attr_capture.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(pwm);
+
+static void pwm_export_release(struct device *child)
+{
+	struct pwm_export *export = child_to_pwm_export(child);
+
+	kfree(export);
+}
+
+static int pwm_export_child(struct device *parent, struct pwm_device *pwm)
+{
+	struct pwm_export *export;
+	char *pwm_prop[2];
+	int ret;
+
+	if (test_and_set_bit(PWMF_EXPORTED, &pwm->flags))
+		return -EBUSY;
+
+	export = kzalloc(sizeof(*export), GFP_KERNEL);
+	if (!export) {
+		clear_bit(PWMF_EXPORTED, &pwm->flags);
+		return -ENOMEM;
+	}
+
+	export->pwm = pwm;
+	mutex_init(&export->lock);
+
+	export->child.release = pwm_export_release;
+	export->child.parent = parent;
+	export->child.devt = MKDEV(0, 0);
+	export->child.groups = pwm_groups;
+	dev_set_name(&export->child, "pwm%u", pwm->hwpwm);
+
+	ret = device_register(&export->child);
+	if (ret) {
+		clear_bit(PWMF_EXPORTED, &pwm->flags);
+		put_device(&export->child);
+		export = NULL;
+		return ret;
+	}
+	pwm_prop[0] = kasprintf(GFP_KERNEL, "EXPORT=pwm%u", pwm->hwpwm);
+	pwm_prop[1] = NULL;
+	kobject_uevent_env(&parent->kobj, KOBJ_CHANGE, pwm_prop);
+	kfree(pwm_prop[0]);
+
+	return 0;
+}
+
+static int pwm_unexport_match(struct device *child, void *data)
+{
+	return child_to_pwm_device(child) == data;
+}
+
+static int pwm_unexport_child(struct device *parent, struct pwm_device *pwm)
+{
+	struct device *child;
+	char *pwm_prop[2];
+
+	if (!test_and_clear_bit(PWMF_EXPORTED, &pwm->flags))
+		return -ENODEV;
+
+	child = device_find_child(parent, pwm, pwm_unexport_match);
+	if (!child)
+		return -ENODEV;
+
+	pwm_prop[0] = kasprintf(GFP_KERNEL, "UNEXPORT=pwm%u", pwm->hwpwm);
+	pwm_prop[1] = NULL;
+	kobject_uevent_env(&parent->kobj, KOBJ_CHANGE, pwm_prop);
+	kfree(pwm_prop[0]);
+
+	/* for device_find_child() */
+	put_device(child);
+	device_unregister(child);
+	pwm_put(pwm);
+
+	return 0;
+}
+
+static ssize_t export_store(struct device *parent,
+			    struct device_attribute *attr,
+			    const char *buf, size_t len)
+{
+	struct pwm_chip *chip = dev_get_drvdata(parent);
+	struct pwm_device *pwm;
+	unsigned int hwpwm;
+	int ret;
+
+	ret = kstrtouint(buf, 0, &hwpwm);
+	if (ret < 0)
+		return ret;
+
+	if (hwpwm >= chip->npwm)
+		return -ENODEV;
+
+	pwm = pwm_request_from_chip(chip, hwpwm, "sysfs");
+	if (IS_ERR(pwm))
+		return PTR_ERR(pwm);
+
+	ret = pwm_export_child(parent, pwm);
+	if (ret < 0)
+		pwm_put(pwm);
+
+	return ret ? : len;
+}
+static DEVICE_ATTR_WO(export);
+
+static ssize_t unexport_store(struct device *parent,
+			      struct device_attribute *attr,
+			      const char *buf, size_t len)
+{
+	struct pwm_chip *chip = dev_get_drvdata(parent);
+	unsigned int hwpwm;
+	int ret;
+
+	ret = kstrtouint(buf, 0, &hwpwm);
+	if (ret < 0)
+		return ret;
+
+	if (hwpwm >= chip->npwm)
+		return -ENODEV;
+
+	ret = pwm_unexport_child(parent, &chip->pwms[hwpwm]);
+
+	return ret ? : len;
+}
+static DEVICE_ATTR_WO(unexport);
+
+static ssize_t npwm_show(struct device *parent, struct device_attribute *attr,
+			 char *buf)
+{
+	const struct pwm_chip *chip = dev_get_drvdata(parent);
+
+	return sysfs_emit(buf, "%u\n", chip->npwm);
+}
+static DEVICE_ATTR_RO(npwm);
+
+static struct attribute *pwm_chip_attrs[] = {
+	&dev_attr_export.attr,
+	&dev_attr_unexport.attr,
+	&dev_attr_npwm.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(pwm_chip);
+
+/* takes export->lock on success */
+static struct pwm_export *pwm_class_get_state(struct device *parent,
+					      struct pwm_device *pwm,
+					      struct pwm_state *state)
+{
+	struct device *child;
+	struct pwm_export *export;
+
+	if (!test_bit(PWMF_EXPORTED, &pwm->flags))
+		return NULL;
+
+	child = device_find_child(parent, pwm, pwm_unexport_match);
+	if (!child)
+		return NULL;
+
+	export = child_to_pwm_export(child);
+	put_device(child);	/* for device_find_child() */
+
+	mutex_lock(&export->lock);
+	pwm_get_state(pwm, state);
+
+	return export;
+}
+
+static int pwm_class_apply_state(struct pwm_export *export,
+				 struct pwm_device *pwm,
+				 struct pwm_state *state)
+{
+	int ret = pwm_apply_state(pwm, state);
+
+	/* release lock taken in pwm_class_get_state */
+	mutex_unlock(&export->lock);
+
+	return ret;
+}
+
+static int pwm_class_resume_npwm(struct device *parent, unsigned int npwm)
+{
+	struct pwm_chip *chip = dev_get_drvdata(parent);
+	unsigned int i;
+	int ret = 0;
+
+	for (i = 0; i < npwm; i++) {
+		struct pwm_device *pwm = &chip->pwms[i];
+		struct pwm_state state;
+		struct pwm_export *export;
+
+		export = pwm_class_get_state(parent, pwm, &state);
+		if (!export)
+			continue;
+
+		/* If pwmchip was not enabled before suspend, do nothing. */
+		if (!export->suspend.enabled) {
+			/* release lock taken in pwm_class_get_state */
+			mutex_unlock(&export->lock);
+			continue;
+		}
+
+		state.enabled = export->suspend.enabled;
+		ret = pwm_class_apply_state(export, pwm, &state);
+		if (ret < 0)
+			break;
+	}
+
+	return ret;
+}
+
+static int pwm_class_suspend(struct device *parent)
+{
+	struct pwm_chip *chip = dev_get_drvdata(parent);
+	unsigned int i;
+	int ret = 0;
+
+	for (i = 0; i < chip->npwm; i++) {
+		struct pwm_device *pwm = &chip->pwms[i];
+		struct pwm_state state;
+		struct pwm_export *export;
+
+		export = pwm_class_get_state(parent, pwm, &state);
+		if (!export)
+			continue;
+
+		/*
+		 * If pwmchip was not enabled before suspend, save
+		 * state for resume time and do nothing else.
+		 */
+		export->suspend = state;
+		if (!state.enabled) {
+			/* release lock taken in pwm_class_get_state */
+			mutex_unlock(&export->lock);
+			continue;
+		}
+
+		state.enabled = false;
+		ret = pwm_class_apply_state(export, pwm, &state);
+		if (ret < 0) {
+			/*
+			 * roll back the PWM devices that were disabled by
+			 * this suspend function.
+			 */
+			pwm_class_resume_npwm(parent, i);
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static int pwm_class_resume(struct device *parent)
+{
+	struct pwm_chip *chip = dev_get_drvdata(parent);
+
+	return pwm_class_resume_npwm(parent, chip->npwm);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(pwm_class_pm_ops, pwm_class_suspend, pwm_class_resume);
+
+static struct class pwm_class = {
+	.name = "pwm",
+	.owner = THIS_MODULE,
+	.dev_groups = pwm_chip_groups,
+	.pm = pm_sleep_ptr(&pwm_class_pm_ops),
+};
+
+static int pwmchip_sysfs_match(struct device *parent, const void *data)
+{
+	return dev_get_drvdata(parent) == data;
+}
+
+void pwmchip_sysfs_export(struct pwm_chip *chip)
+{
+	struct device *parent;
+
+	/*
+	 * If device_create() fails the pwm_chip is still usable by
+	 * the kernel it's just not exported.
+	 */
+	parent = device_create(&pwm_class, chip->dev, MKDEV(0, 0), chip,
+			       "pwmchip%d", chip->base);
+	if (IS_ERR(parent)) {
+		dev_warn(chip->dev,
+			 "device_create failed for pwm_chip sysfs export\n");
+	}
+}
+
+void pwmchip_sysfs_unexport(struct pwm_chip *chip)
+{
+	struct device *parent;
+	unsigned int i;
+
+	parent = class_find_device(&pwm_class, NULL, chip,
+				   pwmchip_sysfs_match);
+	if (!parent)
+		return;
+
+	for (i = 0; i < chip->npwm; i++) {
+		struct pwm_device *pwm = &chip->pwms[i];
+
+		if (test_bit(PWMF_EXPORTED, &pwm->flags))
+			pwm_unexport_child(parent, pwm);
+	}
+
+	put_device(parent);
+	device_unregister(parent);
+}
+
+static int __init pwm_sysfs_init(void)
+{
+	return class_register(&pwm_class);
+}
+subsys_initcall(pwm_sysfs_init);