Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 272 insertions, 0 deletions

diff --git a/drivers/regulator/max8649.c b/drivers/regulator/max8649.c
new file mode 100644
index 000000000..e86d8bd25
--- /dev/null
+++ b/drivers/regulator/max8649.c
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Regulators driver for Maxim max8649
+ *
+ * Copyright (C) 2009-2010 Marvell International Ltd.
+ *      Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/slab.h>
+#include <linux/regulator/max8649.h>
+#include <linux/regmap.h>
+
+#define MAX8649_DCDC_VMIN	750000		/* uV */
+#define MAX8649_DCDC_VMAX	1380000		/* uV */
+#define MAX8649_DCDC_STEP	10000		/* uV */
+#define MAX8649_VOL_MASK	0x3f
+
+/* Registers */
+#define MAX8649_MODE0		0x00
+#define MAX8649_MODE1		0x01
+#define MAX8649_MODE2		0x02
+#define MAX8649_MODE3		0x03
+#define MAX8649_CONTROL		0x04
+#define MAX8649_SYNC		0x05
+#define MAX8649_RAMP		0x06
+#define MAX8649_CHIP_ID1	0x08
+#define MAX8649_CHIP_ID2	0x09
+
+/* Bits */
+#define MAX8649_EN_PD		(1 << 7)
+#define MAX8649_VID0_PD		(1 << 6)
+#define MAX8649_VID1_PD		(1 << 5)
+#define MAX8649_VID_MASK	(3 << 5)
+
+#define MAX8649_FORCE_PWM	(1 << 7)
+#define MAX8649_SYNC_EXTCLK	(1 << 6)
+
+#define MAX8649_EXT_MASK	(3 << 6)
+
+#define MAX8649_RAMP_MASK	(7 << 5)
+#define MAX8649_RAMP_DOWN	(1 << 1)
+
+struct max8649_regulator_info {
+	struct device		*dev;
+	struct regmap		*regmap;
+
+	unsigned	mode:2;	/* bit[1:0] = VID1, VID0 */
+	unsigned	extclk_freq:2;
+	unsigned	extclk:1;
+	unsigned	ramp_timing:3;
+	unsigned	ramp_down:1;
+};
+
+static int max8649_enable_time(struct regulator_dev *rdev)
+{
+	struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
+	int voltage, rate, ret;
+	unsigned int val;
+
+	/* get voltage */
+	ret = regmap_read(info->regmap, rdev->desc->vsel_reg, &val);
+	if (ret != 0)
+		return ret;
+	val &= MAX8649_VOL_MASK;
+	voltage = regulator_list_voltage_linear(rdev, (unsigned char)val);
+
+	/* get rate */
+	ret = regmap_read(info->regmap, MAX8649_RAMP, &val);
+	if (ret != 0)
+		return ret;
+	ret = (val & MAX8649_RAMP_MASK) >> 5;
+	rate = (32 * 1000) >> ret;	/* uV/uS */
+
+	return DIV_ROUND_UP(voltage, rate);
+}
+
+static int max8649_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		regmap_update_bits(info->regmap, rdev->desc->vsel_reg,
+				   MAX8649_FORCE_PWM, MAX8649_FORCE_PWM);
+		break;
+	case REGULATOR_MODE_NORMAL:
+		regmap_update_bits(info->regmap, rdev->desc->vsel_reg,
+				   MAX8649_FORCE_PWM, 0);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static unsigned int max8649_get_mode(struct regulator_dev *rdev)
+{
+	struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(info->regmap, rdev->desc->vsel_reg, &val);
+	if (ret != 0)
+		return ret;
+	if (val & MAX8649_FORCE_PWM)
+		return REGULATOR_MODE_FAST;
+	return REGULATOR_MODE_NORMAL;
+}
+
+static const struct regulator_ops max8649_dcdc_ops = {
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.list_voltage	= regulator_list_voltage_linear,
+	.map_voltage	= regulator_map_voltage_linear,
+	.enable		= regulator_enable_regmap,
+	.disable	= regulator_disable_regmap,
+	.is_enabled	= regulator_is_enabled_regmap,
+	.enable_time	= max8649_enable_time,
+	.set_mode	= max8649_set_mode,
+	.get_mode	= max8649_get_mode,
+
+};
+
+static struct regulator_desc dcdc_desc = {
+	.name		= "max8649",
+	.ops		= &max8649_dcdc_ops,
+	.type		= REGULATOR_VOLTAGE,
+	.n_voltages	= 1 << 6,
+	.owner		= THIS_MODULE,
+	.vsel_mask	= MAX8649_VOL_MASK,
+	.min_uV		= MAX8649_DCDC_VMIN,
+	.uV_step	= MAX8649_DCDC_STEP,
+	.enable_reg	= MAX8649_CONTROL,
+	.enable_mask	= MAX8649_EN_PD,
+	.enable_is_inverted = true,
+};
+
+static const struct regmap_config max8649_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int max8649_regulator_probe(struct i2c_client *client,
+					     const struct i2c_device_id *id)
+{
+	struct max8649_platform_data *pdata = dev_get_platdata(&client->dev);
+	struct max8649_regulator_info *info = NULL;
+	struct regulator_dev *regulator;
+	struct regulator_config config = { };
+	unsigned int val;
+	unsigned char data;
+	int ret;
+
+	info = devm_kzalloc(&client->dev, sizeof(struct max8649_regulator_info),
+			    GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->regmap = devm_regmap_init_i2c(client, &max8649_regmap_config);
+	if (IS_ERR(info->regmap)) {
+		ret = PTR_ERR(info->regmap);
+		dev_err(&client->dev, "Failed to allocate register map: %d\n", ret);
+		return ret;
+	}
+
+	info->dev = &client->dev;
+	i2c_set_clientdata(client, info);
+
+	info->mode = pdata->mode;
+	switch (info->mode) {
+	case 0:
+		dcdc_desc.vsel_reg = MAX8649_MODE0;
+		break;
+	case 1:
+		dcdc_desc.vsel_reg = MAX8649_MODE1;
+		break;
+	case 2:
+		dcdc_desc.vsel_reg = MAX8649_MODE2;
+		break;
+	case 3:
+		dcdc_desc.vsel_reg = MAX8649_MODE3;
+		break;
+	default:
+		break;
+	}
+
+	ret = regmap_read(info->regmap, MAX8649_CHIP_ID1, &val);
+	if (ret != 0) {
+		dev_err(info->dev, "Failed to detect ID of MAX8649:%d\n",
+			ret);
+		return ret;
+	}
+	dev_info(info->dev, "Detected MAX8649 (ID:%x)\n", val);
+
+	/* enable VID0 & VID1 */
+	regmap_update_bits(info->regmap, MAX8649_CONTROL, MAX8649_VID_MASK, 0);
+
+	/* enable/disable external clock synchronization */
+	info->extclk = pdata->extclk;
+	data = (info->extclk) ? MAX8649_SYNC_EXTCLK : 0;
+	regmap_update_bits(info->regmap, dcdc_desc.vsel_reg,
+			   MAX8649_SYNC_EXTCLK, data);
+	if (info->extclk) {
+		/* set external clock frequency */
+		info->extclk_freq = pdata->extclk_freq;
+		regmap_update_bits(info->regmap, MAX8649_SYNC, MAX8649_EXT_MASK,
+				   info->extclk_freq << 6);
+	}
+
+	if (pdata->ramp_timing) {
+		info->ramp_timing = pdata->ramp_timing;
+		regmap_update_bits(info->regmap, MAX8649_RAMP, MAX8649_RAMP_MASK,
+				   info->ramp_timing << 5);
+	}
+
+	info->ramp_down = pdata->ramp_down;
+	if (info->ramp_down) {
+		regmap_update_bits(info->regmap, MAX8649_RAMP, MAX8649_RAMP_DOWN,
+				   MAX8649_RAMP_DOWN);
+	}
+
+	config.dev = &client->dev;
+	config.init_data = pdata->regulator;
+	config.driver_data = info;
+	config.regmap = info->regmap;
+
+	regulator = devm_regulator_register(&client->dev, &dcdc_desc,
+						  &config);
+	if (IS_ERR(regulator)) {
+		dev_err(info->dev, "failed to register regulator %s\n",
+			dcdc_desc.name);
+		return PTR_ERR(regulator);
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id max8649_id[] = {
+	{ "max8649", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max8649_id);
+
+static struct i2c_driver max8649_driver = {
+	.probe		= max8649_regulator_probe,
+	.driver		= {
+		.name	= "max8649",
+	},
+	.id_table	= max8649_id,
+};
+
+static int __init max8649_init(void)
+{
+	return i2c_add_driver(&max8649_driver);
+}
+subsys_initcall(max8649_init);
+
+static void __exit max8649_exit(void)
+{
+	i2c_del_driver(&max8649_driver);
+}
+module_exit(max8649_exit);
+
+/* Module information */
+MODULE_DESCRIPTION("MAXIM 8649 voltage regulator driver");
+MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
+MODULE_LICENSE("GPL");