Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 185 insertions, 0 deletions

diff --git a/drivers/regulator/stm32-pwr.c b/drivers/regulator/stm32-pwr.c
new file mode 100644
index 000000000..e5dd4db64
--- /dev/null
+++ b/drivers/regulator/stm32-pwr.c
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) STMicroelectronics 2019
+// Authors: Gabriel Fernandez <gabriel.fernandez@st.com>
+//          Pascal Paillet <p.paillet@st.com>.
+
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+/*
+ * Registers description
+ */
+#define REG_PWR_CR3 0x0C
+
+#define USB_3_3_EN BIT(24)
+#define USB_3_3_RDY BIT(26)
+#define REG_1_8_EN BIT(28)
+#define REG_1_8_RDY BIT(29)
+#define REG_1_1_EN BIT(30)
+#define REG_1_1_RDY BIT(31)
+
+/* list of supported regulators */
+enum {
+	PWR_REG11,
+	PWR_REG18,
+	PWR_USB33,
+	STM32PWR_REG_NUM_REGS
+};
+
+static u32 ready_mask_table[STM32PWR_REG_NUM_REGS] = {
+	[PWR_REG11] = REG_1_1_RDY,
+	[PWR_REG18] = REG_1_8_RDY,
+	[PWR_USB33] = USB_3_3_RDY,
+};
+
+struct stm32_pwr_reg {
+	void __iomem *base;
+	u32 ready_mask;
+};
+
+static int stm32_pwr_reg_is_ready(struct regulator_dev *rdev)
+{
+	struct stm32_pwr_reg *priv = rdev_get_drvdata(rdev);
+	u32 val;
+
+	val = readl_relaxed(priv->base + REG_PWR_CR3);
+
+	return (val & priv->ready_mask);
+}
+
+static int stm32_pwr_reg_is_enabled(struct regulator_dev *rdev)
+{
+	struct stm32_pwr_reg *priv = rdev_get_drvdata(rdev);
+	u32 val;
+
+	val = readl_relaxed(priv->base + REG_PWR_CR3);
+
+	return (val & rdev->desc->enable_mask);
+}
+
+static int stm32_pwr_reg_enable(struct regulator_dev *rdev)
+{
+	struct stm32_pwr_reg *priv = rdev_get_drvdata(rdev);
+	int ret;
+	u32 val;
+
+	val = readl_relaxed(priv->base + REG_PWR_CR3);
+	val |= rdev->desc->enable_mask;
+	writel_relaxed(val, priv->base + REG_PWR_CR3);
+
+	/* use an arbitrary timeout of 20ms */
+	ret = readx_poll_timeout(stm32_pwr_reg_is_ready, rdev, val, val,
+				 100, 20 * 1000);
+	if (ret)
+		dev_err(&rdev->dev, "regulator enable timed out!\n");
+
+	return ret;
+}
+
+static int stm32_pwr_reg_disable(struct regulator_dev *rdev)
+{
+	struct stm32_pwr_reg *priv = rdev_get_drvdata(rdev);
+	int ret;
+	u32 val;
+
+	val = readl_relaxed(priv->base + REG_PWR_CR3);
+	val &= ~rdev->desc->enable_mask;
+	writel_relaxed(val, priv->base + REG_PWR_CR3);
+
+	/* use an arbitrary timeout of 20ms */
+	ret = readx_poll_timeout(stm32_pwr_reg_is_ready, rdev, val, !val,
+				 100, 20 * 1000);
+	if (ret)
+		dev_err(&rdev->dev, "regulator disable timed out!\n");
+
+	return ret;
+}
+
+static const struct regulator_ops stm32_pwr_reg_ops = {
+	.enable		= stm32_pwr_reg_enable,
+	.disable	= stm32_pwr_reg_disable,
+	.is_enabled	= stm32_pwr_reg_is_enabled,
+};
+
+#define PWR_REG(_id, _name, _volt, _en, _supply) \
+	[_id] = { \
+		.id = _id, \
+		.name = _name, \
+		.of_match = of_match_ptr(_name), \
+		.n_voltages = 1, \
+		.type = REGULATOR_VOLTAGE, \
+		.fixed_uV = _volt, \
+		.ops = &stm32_pwr_reg_ops, \
+		.enable_mask = _en, \
+		.owner = THIS_MODULE, \
+		.supply_name = _supply, \
+	} \
+
+static const struct regulator_desc stm32_pwr_desc[] = {
+	PWR_REG(PWR_REG11, "reg11", 1100000, REG_1_1_EN, "vdd"),
+	PWR_REG(PWR_REG18, "reg18", 1800000, REG_1_8_EN, "vdd"),
+	PWR_REG(PWR_USB33, "usb33", 3300000, USB_3_3_EN, "vdd_3v3_usbfs"),
+};
+
+static int stm32_pwr_regulator_probe(struct platform_device *pdev)
+{
+	struct stm32_pwr_reg *priv;
+	void __iomem *base;
+	struct regulator_dev *rdev;
+	struct regulator_config config = { };
+	int i, ret = 0;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base)) {
+		dev_err(&pdev->dev, "Unable to map IO memory\n");
+		return PTR_ERR(base);
+	}
+
+	config.dev = &pdev->dev;
+
+	for (i = 0; i < STM32PWR_REG_NUM_REGS; i++) {
+		priv = devm_kzalloc(&pdev->dev, sizeof(struct stm32_pwr_reg),
+				    GFP_KERNEL);
+		if (!priv)
+			return -ENOMEM;
+		priv->base = base;
+		priv->ready_mask = ready_mask_table[i];
+		config.driver_data = priv;
+
+		rdev = devm_regulator_register(&pdev->dev,
+					       &stm32_pwr_desc[i],
+					       &config);
+		if (IS_ERR(rdev)) {
+			ret = PTR_ERR(rdev);
+			dev_err(&pdev->dev,
+				"Failed to register regulator: %d\n", ret);
+			break;
+		}
+	}
+	return ret;
+}
+
+static const struct of_device_id __maybe_unused stm32_pwr_of_match[] = {
+	{ .compatible = "st,stm32mp1,pwr-reg", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, stm32_pwr_of_match);
+
+static struct platform_driver stm32_pwr_driver = {
+	.probe = stm32_pwr_regulator_probe,
+	.driver = {
+		.name  = "stm32-pwr-regulator",
+		.of_match_table = of_match_ptr(stm32_pwr_of_match),
+	},
+};
+module_platform_driver(stm32_pwr_driver);
+
+MODULE_DESCRIPTION("STM32MP1 PWR voltage regulator driver");
+MODULE_AUTHOR("Pascal Paillet <p.paillet@st.com>");
+MODULE_LICENSE("GPL v2");