Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 379 insertions, 0 deletions

diff --git a/drivers/scsi/aic94xx/aic94xx_hwi.h b/drivers/scsi/aic94xx/aic94xx_hwi.h
new file mode 100644
index 000000000..930e192b1
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_hwi.h
@@ -0,0 +1,379 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Aic94xx SAS/SATA driver hardware interface header file.
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ */
+
+#ifndef _AIC94XX_HWI_H_
+#define _AIC94XX_HWI_H_
+
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+
+#include <scsi/libsas.h>
+
+#include "aic94xx.h"
+#include "aic94xx_sas.h"
+
+/* Define ASD_MAX_PHYS to the maximum phys ever. Currently 8. */
+#define ASD_MAX_PHYS       8
+#define ASD_PCBA_SN_SIZE   12
+
+struct asd_ha_addrspace {
+	void __iomem  *addr;
+	unsigned long  start;       /* pci resource start */
+	unsigned long  len;         /* pci resource len */
+	unsigned long  flags;       /* pci resource flags */
+
+	/* addresses internal to the host adapter */
+	u32 swa_base; /* mmspace 1 (MBAR1) uses this only */
+	u32 swb_base;
+	u32 swc_base;
+};
+
+struct bios_struct {
+	int    present;
+	u8     maj;
+	u8     min;
+	u32    bld;
+};
+
+struct unit_element_struct {
+	u16    num;
+	u16    size;
+	void   *area;
+};
+
+struct flash_struct {
+	u32    bar;
+	int    present;
+	int    wide;
+	u8     manuf;
+	u8     dev_id;
+	u8     sec_prot;
+	u8     method;
+
+	u32    dir_offs;
+};
+
+struct asd_phy_desc {
+	/* From CTRL-A settings, then set to what is appropriate */
+	u8     sas_addr[SAS_ADDR_SIZE];
+	u8     max_sas_lrate;
+	u8     min_sas_lrate;
+	u8     max_sata_lrate;
+	u8     min_sata_lrate;
+	u8     flags;
+#define ASD_CRC_DIS  1
+#define ASD_SATA_SPINUP_HOLD 2
+
+	u8     phy_control_0; /* mode 5 reg 0x160 */
+	u8     phy_control_1; /* mode 5 reg 0x161 */
+	u8     phy_control_2; /* mode 5 reg 0x162 */
+	u8     phy_control_3; /* mode 5 reg 0x163 */
+};
+
+struct asd_dma_tok {
+	void *vaddr;
+	dma_addr_t dma_handle;
+	size_t size;
+};
+
+struct hw_profile {
+	struct bios_struct bios;
+	struct unit_element_struct ue;
+	struct flash_struct flash;
+
+	u8     sas_addr[SAS_ADDR_SIZE];
+	char   pcba_sn[ASD_PCBA_SN_SIZE+1];
+
+	u8     enabled_phys;	  /* mask of enabled phys */
+	struct asd_phy_desc phy_desc[ASD_MAX_PHYS];
+	u32    max_scbs;	  /* absolute sequencer scb queue size */
+	struct asd_dma_tok *scb_ext;
+	u32    max_ddbs;
+	struct asd_dma_tok *ddb_ext;
+
+	spinlock_t ddb_lock;
+	void  *ddb_bitmap;
+
+	int    num_phys;	  /* ENABLEABLE */
+	int    max_phys;	  /* REPORTED + ENABLEABLE */
+
+	unsigned addr_range;	  /* max # of addrs; max # of possible ports */
+	unsigned port_name_base;
+	unsigned dev_name_base;
+	unsigned sata_name_base;
+};
+
+struct asd_ascb {
+	struct list_head list;
+	struct asd_ha_struct *ha;
+
+	struct scb *scb;	  /* equals dma_scb->vaddr */
+	struct asd_dma_tok dma_scb;
+	struct asd_dma_tok *sg_arr;
+
+	void (*tasklet_complete)(struct asd_ascb *, struct done_list_struct *);
+	u8     uldd_timer:1;
+
+	/* internally generated command */
+	struct timer_list timer;
+	struct completion *completion;
+	u8        tag_valid:1;
+	__be16    tag;		  /* error recovery only */
+
+	/* If this is an Empty SCB, index of first edb in seq->edb_arr. */
+	int    edb_index;
+
+	/* Used by the timer timeout function. */
+	int    tc_index;
+
+	void   *uldd_task;
+};
+
+#define ASD_DL_SIZE_BITS   0x8
+#define ASD_DL_SIZE        (1<<(2+ASD_DL_SIZE_BITS))
+#define ASD_DEF_DL_TOGGLE  0x01
+
+struct asd_seq_data {
+	spinlock_t pend_q_lock;
+	u16    scbpro;
+	int    pending;
+	struct list_head pend_q;
+	int    can_queue;	  /* per adapter */
+	struct asd_dma_tok next_scb; /* next scb to be delivered to CSEQ */
+
+	spinlock_t tc_index_lock;
+	void **tc_index_array;
+	void *tc_index_bitmap;
+	int   tc_index_bitmap_bits;
+
+	struct tasklet_struct dl_tasklet;
+	struct done_list_struct *dl; /* array of done list entries, equals */
+	struct asd_dma_tok *actual_dl; /* actual_dl->vaddr */
+	int    dl_toggle;
+	int    dl_next;
+
+	int    num_edbs;
+	struct asd_dma_tok **edb_arr;
+	int    num_escbs;
+	struct asd_ascb **escb_arr; /* array of pointers to escbs */
+};
+
+/* This is an internal port structure. These are used to get accurate
+ * phy_mask for updating DDB 0.
+ */
+struct asd_port {
+	u8  sas_addr[SAS_ADDR_SIZE];
+	u8  attached_sas_addr[SAS_ADDR_SIZE];
+	u32 phy_mask;
+	int num_phys;
+};
+
+/* This is the Host Adapter structure.  It describes the hardware
+ * SAS adapter.
+ */
+struct asd_ha_struct {
+	struct pci_dev   *pcidev;
+	const char       *name;
+
+	struct sas_ha_struct sas_ha;
+
+	u8                revision_id;
+
+	int               iospace;
+	spinlock_t        iolock;
+	struct asd_ha_addrspace io_handle[2];
+
+	struct hw_profile hw_prof;
+
+	struct asd_phy    phys[ASD_MAX_PHYS];
+	spinlock_t        asd_ports_lock;
+	struct asd_port   asd_ports[ASD_MAX_PHYS];
+	struct asd_sas_port   ports[ASD_MAX_PHYS];
+
+	struct dma_pool  *scb_pool;
+
+	struct asd_seq_data  seq; /* sequencer related */
+	u32    bios_status;
+	const struct firmware *bios_image;
+};
+
+/* ---------- Common macros ---------- */
+
+#define ASD_BUSADDR_LO(__dma_handle) ((u32)(__dma_handle))
+#define ASD_BUSADDR_HI(__dma_handle) (((sizeof(dma_addr_t))==8)     \
+                                    ? ((u32)((__dma_handle) >> 32)) \
+                                    : ((u32)0))
+
+#define dev_to_asd_ha(__dev)  pci_get_drvdata(to_pci_dev(__dev))
+#define SCB_SITE_VALID(__site_no) (((__site_no) & 0xF0FF) != 0x00FF   \
+				 && ((__site_no) & 0xF0FF) > 0x001F)
+/* For each bit set in __lseq_mask, set __lseq to equal the bit
+ * position of the set bit and execute the statement following.
+ * __mc is the temporary mask, used as a mask "counter".
+ */
+#define for_each_sequencer(__lseq_mask, __mc, __lseq)                        \
+	for ((__mc)=(__lseq_mask),(__lseq)=0;(__mc)!=0;(__lseq++),(__mc)>>=1)\
+		if (((__mc) & 1))
+#define for_each_phy(__lseq_mask, __mc, __lseq)                              \
+	for ((__mc)=(__lseq_mask),(__lseq)=0;(__mc)!=0;(__lseq++),(__mc)>>=1)\
+		if (((__mc) & 1))
+
+#define PHY_ENABLED(_HA, _I) ((_HA)->hw_prof.enabled_phys & (1<<(_I)))
+
+/* ---------- DMA allocs ---------- */
+
+static inline struct asd_dma_tok *asd_dmatok_alloc(gfp_t flags)
+{
+	return kmem_cache_alloc(asd_dma_token_cache, flags);
+}
+
+static inline void asd_dmatok_free(struct asd_dma_tok *token)
+{
+	kmem_cache_free(asd_dma_token_cache, token);
+}
+
+static inline struct asd_dma_tok *asd_alloc_coherent(struct asd_ha_struct *
+						     asd_ha, size_t size,
+						     gfp_t flags)
+{
+	struct asd_dma_tok *token = asd_dmatok_alloc(flags);
+	if (token) {
+		token->size = size;
+		token->vaddr = dma_alloc_coherent(&asd_ha->pcidev->dev,
+						  token->size,
+						  &token->dma_handle,
+						  flags);
+		if (!token->vaddr) {
+			asd_dmatok_free(token);
+			token = NULL;
+		}
+	}
+	return token;
+}
+
+static inline void asd_free_coherent(struct asd_ha_struct *asd_ha,
+				     struct asd_dma_tok *token)
+{
+	if (token) {
+		dma_free_coherent(&asd_ha->pcidev->dev, token->size,
+				  token->vaddr, token->dma_handle);
+		asd_dmatok_free(token);
+	}
+}
+
+static inline void asd_init_ascb(struct asd_ha_struct *asd_ha,
+				 struct asd_ascb *ascb)
+{
+	INIT_LIST_HEAD(&ascb->list);
+	ascb->scb = ascb->dma_scb.vaddr;
+	ascb->ha = asd_ha;
+	timer_setup(&ascb->timer, NULL, 0);
+	ascb->tc_index = -1;
+}
+
+/* Must be called with the tc_index_lock held!
+ */
+static inline void asd_tc_index_release(struct asd_seq_data *seq, int index)
+{
+	seq->tc_index_array[index] = NULL;
+	clear_bit(index, seq->tc_index_bitmap);
+}
+
+/* Must be called with the tc_index_lock held!
+ */
+static inline int asd_tc_index_get(struct asd_seq_data *seq, void *ptr)
+{
+	int index;
+
+	index = find_first_zero_bit(seq->tc_index_bitmap,
+				    seq->tc_index_bitmap_bits);
+	if (index == seq->tc_index_bitmap_bits)
+		return -1;
+
+	seq->tc_index_array[index] = ptr;
+	set_bit(index, seq->tc_index_bitmap);
+
+	return index;
+}
+
+/* Must be called with the tc_index_lock held!
+ */
+static inline void *asd_tc_index_find(struct asd_seq_data *seq, int index)
+{
+	return seq->tc_index_array[index];
+}
+
+/**
+ * asd_ascb_free -- free a single aSCB after is has completed
+ * @ascb: pointer to the aSCB of interest
+ *
+ * This frees an aSCB after it has been executed/completed by
+ * the sequencer.
+ */
+static inline void asd_ascb_free(struct asd_ascb *ascb)
+{
+	if (ascb) {
+		struct asd_ha_struct *asd_ha = ascb->ha;
+		unsigned long flags;
+
+		BUG_ON(!list_empty(&ascb->list));
+		spin_lock_irqsave(&ascb->ha->seq.tc_index_lock, flags);
+		asd_tc_index_release(&ascb->ha->seq, ascb->tc_index);
+		spin_unlock_irqrestore(&ascb->ha->seq.tc_index_lock, flags);
+		dma_pool_free(asd_ha->scb_pool, ascb->dma_scb.vaddr,
+			      ascb->dma_scb.dma_handle);
+		kmem_cache_free(asd_ascb_cache, ascb);
+	}
+}
+
+/**
+ * asd_ascb_list_free -- free a list of ascbs
+ * @ascb_list: a list of ascbs
+ *
+ * This function will free a list of ascbs allocated by asd_ascb_alloc_list.
+ * It is used when say the scb queueing function returned QUEUE_FULL,
+ * and we do not need the ascbs any more.
+ */
+static inline void asd_ascb_free_list(struct asd_ascb *ascb_list)
+{
+	LIST_HEAD(list);
+	struct list_head *n, *pos;
+
+	__list_add(&list, ascb_list->list.prev, &ascb_list->list);
+	list_for_each_safe(pos, n, &list) {
+		list_del_init(pos);
+		asd_ascb_free(list_entry(pos, struct asd_ascb, list));
+	}
+}
+
+/* ---------- Function declarations ---------- */
+
+int  asd_init_hw(struct asd_ha_struct *asd_ha);
+irqreturn_t asd_hw_isr(int irq, void *dev_id);
+
+
+struct asd_ascb *asd_ascb_alloc_list(struct asd_ha_struct
+				     *asd_ha, int *num,
+				     gfp_t gfp_mask);
+
+int  asd_post_ascb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb,
+			int num);
+int  asd_post_escb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb,
+			int num);
+
+int  asd_init_post_escbs(struct asd_ha_struct *asd_ha);
+void asd_build_control_phy(struct asd_ascb *ascb, int phy_id, u8 subfunc);
+void asd_control_led(struct asd_ha_struct *asd_ha, int phy_id, int op);
+void asd_turn_led(struct asd_ha_struct *asd_ha, int phy_id, int op);
+int  asd_enable_phys(struct asd_ha_struct *asd_ha, const u8 phy_mask);
+
+void asd_ascb_timedout(struct timer_list *t);
+int  asd_chip_hardrst(struct asd_ha_struct *asd_ha);
+
+#endif