Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 403 insertions, 0 deletions

diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
new file mode 100644
index 000000000..8046e9138
--- /dev/null
+++ b/drivers/spi/spi-dw-mmio.c
@@ -0,0 +1,403 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Memory-mapped interface driver for DW SPI Core
+ *
+ * Copyright (c) 2010, Octasic semiconductor.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/scatterlist.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/acpi.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include "spi-dw.h"
+
+#define DRIVER_NAME "dw_spi_mmio"
+
+struct dw_spi_mmio {
+	struct dw_spi  dws;
+	struct clk     *clk;
+	struct clk     *pclk;
+	void           *priv;
+	struct reset_control *rstc;
+};
+
+#define MSCC_CPU_SYSTEM_CTRL_GENERAL_CTRL	0x24
+#define OCELOT_IF_SI_OWNER_OFFSET		4
+#define JAGUAR2_IF_SI_OWNER_OFFSET		6
+#define MSCC_IF_SI_OWNER_MASK			GENMASK(1, 0)
+#define MSCC_IF_SI_OWNER_SISL			0
+#define MSCC_IF_SI_OWNER_SIBM			1
+#define MSCC_IF_SI_OWNER_SIMC			2
+
+#define MSCC_SPI_MST_SW_MODE			0x14
+#define MSCC_SPI_MST_SW_MODE_SW_PIN_CTRL_MODE	BIT(13)
+#define MSCC_SPI_MST_SW_MODE_SW_SPI_CS(x)	(x << 5)
+
+#define SPARX5_FORCE_ENA			0xa4
+#define SPARX5_FORCE_VAL			0xa8
+
+struct dw_spi_mscc {
+	struct regmap       *syscon;
+	void __iomem        *spi_mst; /* Not sparx5 */
+};
+
+/*
+ * The Designware SPI controller (referred to as master in the documentation)
+ * automatically deasserts chip select when the tx fifo is empty. The chip
+ * selects then needs to be either driven as GPIOs or, for the first 4 using
+ * the SPI boot controller registers. the final chip select is an OR gate
+ * between the Designware SPI controller and the SPI boot controller.
+ */
+static void dw_spi_mscc_set_cs(struct spi_device *spi, bool enable)
+{
+	struct dw_spi *dws = spi_master_get_devdata(spi->master);
+	struct dw_spi_mmio *dwsmmio = container_of(dws, struct dw_spi_mmio, dws);
+	struct dw_spi_mscc *dwsmscc = dwsmmio->priv;
+	u32 cs = spi->chip_select;
+
+	if (cs < 4) {
+		u32 sw_mode = MSCC_SPI_MST_SW_MODE_SW_PIN_CTRL_MODE;
+
+		if (!enable)
+			sw_mode |= MSCC_SPI_MST_SW_MODE_SW_SPI_CS(BIT(cs));
+
+		writel(sw_mode, dwsmscc->spi_mst + MSCC_SPI_MST_SW_MODE);
+	}
+
+	dw_spi_set_cs(spi, enable);
+}
+
+static int dw_spi_mscc_init(struct platform_device *pdev,
+			    struct dw_spi_mmio *dwsmmio,
+			    const char *cpu_syscon, u32 if_si_owner_offset)
+{
+	struct dw_spi_mscc *dwsmscc;
+
+	dwsmscc = devm_kzalloc(&pdev->dev, sizeof(*dwsmscc), GFP_KERNEL);
+	if (!dwsmscc)
+		return -ENOMEM;
+
+	dwsmscc->spi_mst = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(dwsmscc->spi_mst)) {
+		dev_err(&pdev->dev, "SPI_MST region map failed\n");
+		return PTR_ERR(dwsmscc->spi_mst);
+	}
+
+	dwsmscc->syscon = syscon_regmap_lookup_by_compatible(cpu_syscon);
+	if (IS_ERR(dwsmscc->syscon))
+		return PTR_ERR(dwsmscc->syscon);
+
+	/* Deassert all CS */
+	writel(0, dwsmscc->spi_mst + MSCC_SPI_MST_SW_MODE);
+
+	/* Select the owner of the SI interface */
+	regmap_update_bits(dwsmscc->syscon, MSCC_CPU_SYSTEM_CTRL_GENERAL_CTRL,
+			   MSCC_IF_SI_OWNER_MASK << if_si_owner_offset,
+			   MSCC_IF_SI_OWNER_SIMC << if_si_owner_offset);
+
+	dwsmmio->dws.set_cs = dw_spi_mscc_set_cs;
+	dwsmmio->priv = dwsmscc;
+
+	return 0;
+}
+
+static int dw_spi_mscc_ocelot_init(struct platform_device *pdev,
+				   struct dw_spi_mmio *dwsmmio)
+{
+	return dw_spi_mscc_init(pdev, dwsmmio, "mscc,ocelot-cpu-syscon",
+				OCELOT_IF_SI_OWNER_OFFSET);
+}
+
+static int dw_spi_mscc_jaguar2_init(struct platform_device *pdev,
+				    struct dw_spi_mmio *dwsmmio)
+{
+	return dw_spi_mscc_init(pdev, dwsmmio, "mscc,jaguar2-cpu-syscon",
+				JAGUAR2_IF_SI_OWNER_OFFSET);
+}
+
+/*
+ * The Designware SPI controller (referred to as master in the
+ * documentation) automatically deasserts chip select when the tx fifo
+ * is empty. The chip selects then needs to be driven by a CS override
+ * register. enable is an active low signal.
+ */
+static void dw_spi_sparx5_set_cs(struct spi_device *spi, bool enable)
+{
+	struct dw_spi *dws = spi_master_get_devdata(spi->master);
+	struct dw_spi_mmio *dwsmmio = container_of(dws, struct dw_spi_mmio, dws);
+	struct dw_spi_mscc *dwsmscc = dwsmmio->priv;
+	u8 cs = spi->chip_select;
+
+	if (!enable) {
+		/* CS override drive enable */
+		regmap_write(dwsmscc->syscon, SPARX5_FORCE_ENA, 1);
+		/* Now set CSx enabled */
+		regmap_write(dwsmscc->syscon, SPARX5_FORCE_VAL, ~BIT(cs));
+		/* Allow settle */
+		usleep_range(1, 5);
+	} else {
+		/* CS value */
+		regmap_write(dwsmscc->syscon, SPARX5_FORCE_VAL, ~0);
+		/* Allow settle */
+		usleep_range(1, 5);
+		/* CS override drive disable */
+		regmap_write(dwsmscc->syscon, SPARX5_FORCE_ENA, 0);
+	}
+
+	dw_spi_set_cs(spi, enable);
+}
+
+static int dw_spi_mscc_sparx5_init(struct platform_device *pdev,
+				   struct dw_spi_mmio *dwsmmio)
+{
+	const char *syscon_name = "microchip,sparx5-cpu-syscon";
+	struct device *dev = &pdev->dev;
+	struct dw_spi_mscc *dwsmscc;
+
+	if (!IS_ENABLED(CONFIG_SPI_MUX)) {
+		dev_err(dev, "This driver needs CONFIG_SPI_MUX\n");
+		return -EOPNOTSUPP;
+	}
+
+	dwsmscc = devm_kzalloc(dev, sizeof(*dwsmscc), GFP_KERNEL);
+	if (!dwsmscc)
+		return -ENOMEM;
+
+	dwsmscc->syscon =
+		syscon_regmap_lookup_by_compatible(syscon_name);
+	if (IS_ERR(dwsmscc->syscon)) {
+		dev_err(dev, "No syscon map %s\n", syscon_name);
+		return PTR_ERR(dwsmscc->syscon);
+	}
+
+	dwsmmio->dws.set_cs = dw_spi_sparx5_set_cs;
+	dwsmmio->priv = dwsmscc;
+
+	return 0;
+}
+
+static int dw_spi_alpine_init(struct platform_device *pdev,
+			      struct dw_spi_mmio *dwsmmio)
+{
+	dwsmmio->dws.caps = DW_SPI_CAP_CS_OVERRIDE;
+
+	return 0;
+}
+
+static int dw_spi_pssi_init(struct platform_device *pdev,
+			    struct dw_spi_mmio *dwsmmio)
+{
+	dw_spi_dma_setup_generic(&dwsmmio->dws);
+
+	return 0;
+}
+
+static int dw_spi_hssi_init(struct platform_device *pdev,
+			    struct dw_spi_mmio *dwsmmio)
+{
+	dwsmmio->dws.ip = DW_HSSI_ID;
+
+	dw_spi_dma_setup_generic(&dwsmmio->dws);
+
+	return 0;
+}
+
+static int dw_spi_intel_init(struct platform_device *pdev,
+			     struct dw_spi_mmio *dwsmmio)
+{
+	dwsmmio->dws.ip = DW_HSSI_ID;
+
+	return 0;
+}
+
+/*
+ * DMA-based mem ops are not configured for this device and are not tested.
+ */
+static int dw_spi_mountevans_imc_init(struct platform_device *pdev,
+				      struct dw_spi_mmio *dwsmmio)
+{
+	/*
+	 * The Intel Mount Evans SoC's Integrated Management Complex DW
+	 * apb_ssi_v4.02a controller has an errata where a full TX FIFO can
+	 * result in data corruption. The suggested workaround is to never
+	 * completely fill the FIFO. The TX FIFO has a size of 32 so the
+	 * fifo_len is set to 31.
+	 */
+	dwsmmio->dws.fifo_len = 31;
+
+	return 0;
+}
+
+static int dw_spi_canaan_k210_init(struct platform_device *pdev,
+				   struct dw_spi_mmio *dwsmmio)
+{
+	/*
+	 * The Canaan Kendryte K210 SoC DW apb_ssi v4 spi controller is
+	 * documented to have a 32 word deep TX and RX FIFO, which
+	 * spi_hw_init() detects. However, when the RX FIFO is filled up to
+	 * 32 entries (RXFLR = 32), an RX FIFO overrun error occurs. Avoid this
+	 * problem by force setting fifo_len to 31.
+	 */
+	dwsmmio->dws.fifo_len = 31;
+
+	return 0;
+}
+
+static int dw_spi_mmio_probe(struct platform_device *pdev)
+{
+	int (*init_func)(struct platform_device *pdev,
+			 struct dw_spi_mmio *dwsmmio);
+	struct dw_spi_mmio *dwsmmio;
+	struct resource *mem;
+	struct dw_spi *dws;
+	int ret;
+	int num_cs;
+
+	dwsmmio = devm_kzalloc(&pdev->dev, sizeof(struct dw_spi_mmio),
+			GFP_KERNEL);
+	if (!dwsmmio)
+		return -ENOMEM;
+
+	dws = &dwsmmio->dws;
+
+	/* Get basic io resource and map it */
+	dws->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &mem);
+	if (IS_ERR(dws->regs))
+		return PTR_ERR(dws->regs);
+
+	dws->paddr = mem->start;
+
+	dws->irq = platform_get_irq(pdev, 0);
+	if (dws->irq < 0)
+		return dws->irq; /* -ENXIO */
+
+	dwsmmio->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(dwsmmio->clk))
+		return PTR_ERR(dwsmmio->clk);
+	ret = clk_prepare_enable(dwsmmio->clk);
+	if (ret)
+		return ret;
+
+	/* Optional clock needed to access the registers */
+	dwsmmio->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
+	if (IS_ERR(dwsmmio->pclk)) {
+		ret = PTR_ERR(dwsmmio->pclk);
+		goto out_clk;
+	}
+	ret = clk_prepare_enable(dwsmmio->pclk);
+	if (ret)
+		goto out_clk;
+
+	/* find an optional reset controller */
+	dwsmmio->rstc = devm_reset_control_get_optional_exclusive(&pdev->dev, "spi");
+	if (IS_ERR(dwsmmio->rstc)) {
+		ret = PTR_ERR(dwsmmio->rstc);
+		goto out_clk;
+	}
+	reset_control_deassert(dwsmmio->rstc);
+
+	dws->bus_num = pdev->id;
+
+	dws->max_freq = clk_get_rate(dwsmmio->clk);
+
+	device_property_read_u32(&pdev->dev, "reg-io-width", &dws->reg_io_width);
+
+	num_cs = 4;
+
+	device_property_read_u32(&pdev->dev, "num-cs", &num_cs);
+
+	dws->num_cs = num_cs;
+
+	init_func = device_get_match_data(&pdev->dev);
+	if (init_func) {
+		ret = init_func(pdev, dwsmmio);
+		if (ret)
+			goto out;
+	}
+
+	pm_runtime_enable(&pdev->dev);
+
+	ret = dw_spi_add_host(&pdev->dev, dws);
+	if (ret)
+		goto out;
+
+	platform_set_drvdata(pdev, dwsmmio);
+	return 0;
+
+out:
+	pm_runtime_disable(&pdev->dev);
+	clk_disable_unprepare(dwsmmio->pclk);
+out_clk:
+	clk_disable_unprepare(dwsmmio->clk);
+	reset_control_assert(dwsmmio->rstc);
+
+	return ret;
+}
+
+static int dw_spi_mmio_remove(struct platform_device *pdev)
+{
+	struct dw_spi_mmio *dwsmmio = platform_get_drvdata(pdev);
+
+	dw_spi_remove_host(&dwsmmio->dws);
+	pm_runtime_disable(&pdev->dev);
+	clk_disable_unprepare(dwsmmio->pclk);
+	clk_disable_unprepare(dwsmmio->clk);
+	reset_control_assert(dwsmmio->rstc);
+
+	return 0;
+}
+
+static const struct of_device_id dw_spi_mmio_of_match[] = {
+	{ .compatible = "snps,dw-apb-ssi", .data = dw_spi_pssi_init},
+	{ .compatible = "mscc,ocelot-spi", .data = dw_spi_mscc_ocelot_init},
+	{ .compatible = "mscc,jaguar2-spi", .data = dw_spi_mscc_jaguar2_init},
+	{ .compatible = "amazon,alpine-dw-apb-ssi", .data = dw_spi_alpine_init},
+	{ .compatible = "renesas,rzn1-spi", .data = dw_spi_pssi_init},
+	{ .compatible = "snps,dwc-ssi-1.01a", .data = dw_spi_hssi_init},
+	{ .compatible = "intel,keembay-ssi", .data = dw_spi_intel_init},
+	{ .compatible = "intel,thunderbay-ssi", .data = dw_spi_intel_init},
+	{
+		.compatible = "intel,mountevans-imc-ssi",
+		.data = dw_spi_mountevans_imc_init,
+	},
+	{ .compatible = "microchip,sparx5-spi", dw_spi_mscc_sparx5_init},
+	{ .compatible = "canaan,k210-spi", dw_spi_canaan_k210_init},
+	{ /* end of table */}
+};
+MODULE_DEVICE_TABLE(of, dw_spi_mmio_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id dw_spi_mmio_acpi_match[] = {
+	{"HISI0173", (kernel_ulong_t)dw_spi_pssi_init},
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, dw_spi_mmio_acpi_match);
+#endif
+
+static struct platform_driver dw_spi_mmio_driver = {
+	.probe		= dw_spi_mmio_probe,
+	.remove		= dw_spi_mmio_remove,
+	.driver		= {
+		.name	= DRIVER_NAME,
+		.of_match_table = dw_spi_mmio_of_match,
+		.acpi_match_table = ACPI_PTR(dw_spi_mmio_acpi_match),
+	},
+};
+module_platform_driver(dw_spi_mmio_driver);
+
+MODULE_AUTHOR("Jean-Hugues Deschenes <jean-hugues.deschenes@octasic.com>");
+MODULE_DESCRIPTION("Memory-mapped I/O interface driver for DW SPI Core");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(SPI_DW_CORE);