Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 867 insertions, 0 deletions

diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
new file mode 100644
index 000000000..565cd4c48
--- /dev/null
+++ b/drivers/spi/spi-orion.c
@@ -0,0 +1,867 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Marvell Orion SPI controller driver
+ *
+ * Author: Shadi Ammouri <shadi@marvell.com>
+ * Copyright (C) 2007-2008 Marvell Ltd.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include <linux/sizes.h>
+#include <asm/unaligned.h>
+
+#define DRIVER_NAME			"orion_spi"
+
+/* Runtime PM autosuspend timeout: PM is fairly light on this driver */
+#define SPI_AUTOSUSPEND_TIMEOUT		200
+
+/* Some SoCs using this driver support up to 8 chip selects.
+ * It is up to the implementer to only use the chip selects
+ * that are available.
+ */
+#define ORION_NUM_CHIPSELECTS		8
+
+#define ORION_SPI_WAIT_RDY_MAX_LOOP	2000 /* in usec */
+
+#define ORION_SPI_IF_CTRL_REG		0x00
+#define ORION_SPI_IF_CONFIG_REG		0x04
+#define ORION_SPI_IF_RXLSBF		BIT(14)
+#define ORION_SPI_IF_TXLSBF		BIT(13)
+#define ORION_SPI_DATA_OUT_REG		0x08
+#define ORION_SPI_DATA_IN_REG		0x0c
+#define ORION_SPI_INT_CAUSE_REG		0x10
+#define ORION_SPI_TIMING_PARAMS_REG	0x18
+
+/* Register for the "Direct Mode" */
+#define SPI_DIRECT_WRITE_CONFIG_REG	0x20
+
+#define ORION_SPI_TMISO_SAMPLE_MASK	(0x3 << 6)
+#define ORION_SPI_TMISO_SAMPLE_1	(1 << 6)
+#define ORION_SPI_TMISO_SAMPLE_2	(2 << 6)
+
+#define ORION_SPI_MODE_CPOL		(1 << 11)
+#define ORION_SPI_MODE_CPHA		(1 << 12)
+#define ORION_SPI_IF_8_16_BIT_MODE	(1 << 5)
+#define ORION_SPI_CLK_PRESCALE_MASK	0x1F
+#define ARMADA_SPI_CLK_PRESCALE_MASK	0xDF
+#define ORION_SPI_MODE_MASK		(ORION_SPI_MODE_CPOL | \
+					 ORION_SPI_MODE_CPHA)
+#define ORION_SPI_CS_MASK	0x1C
+#define ORION_SPI_CS_SHIFT	2
+#define ORION_SPI_CS(cs)	((cs << ORION_SPI_CS_SHIFT) & \
+					ORION_SPI_CS_MASK)
+
+enum orion_spi_type {
+	ORION_SPI,
+	ARMADA_SPI,
+};
+
+struct orion_spi_dev {
+	enum orion_spi_type	typ;
+	/*
+	 * min_divisor and max_hz should be exclusive, the only we can
+	 * have both is for managing the armada-370-spi case with old
+	 * device tree
+	 */
+	unsigned long		max_hz;
+	unsigned int		min_divisor;
+	unsigned int		max_divisor;
+	u32			prescale_mask;
+	bool			is_errata_50mhz_ac;
+};
+
+struct orion_direct_acc {
+	void __iomem		*vaddr;
+	u32			size;
+};
+
+struct orion_child_options {
+	struct orion_direct_acc direct_access;
+};
+
+struct orion_spi {
+	struct spi_master	*master;
+	void __iomem		*base;
+	struct clk              *clk;
+	struct clk              *axi_clk;
+	const struct orion_spi_dev *devdata;
+	struct device		*dev;
+
+	struct orion_child_options	child[ORION_NUM_CHIPSELECTS];
+};
+
+#ifdef CONFIG_PM
+static int orion_spi_runtime_suspend(struct device *dev);
+static int orion_spi_runtime_resume(struct device *dev);
+#endif
+
+static inline void __iomem *spi_reg(struct orion_spi *orion_spi, u32 reg)
+{
+	return orion_spi->base + reg;
+}
+
+static inline void
+orion_spi_setbits(struct orion_spi *orion_spi, u32 reg, u32 mask)
+{
+	void __iomem *reg_addr = spi_reg(orion_spi, reg);
+	u32 val;
+
+	val = readl(reg_addr);
+	val |= mask;
+	writel(val, reg_addr);
+}
+
+static inline void
+orion_spi_clrbits(struct orion_spi *orion_spi, u32 reg, u32 mask)
+{
+	void __iomem *reg_addr = spi_reg(orion_spi, reg);
+	u32 val;
+
+	val = readl(reg_addr);
+	val &= ~mask;
+	writel(val, reg_addr);
+}
+
+static int orion_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
+{
+	u32 tclk_hz;
+	u32 rate;
+	u32 prescale;
+	u32 reg;
+	struct orion_spi *orion_spi;
+	const struct orion_spi_dev *devdata;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+	devdata = orion_spi->devdata;
+
+	tclk_hz = clk_get_rate(orion_spi->clk);
+
+	if (devdata->typ == ARMADA_SPI) {
+		/*
+		 * Given the core_clk (tclk_hz) and the target rate (speed) we
+		 * determine the best values for SPR (in [0 .. 15]) and SPPR (in
+		 * [0..7]) such that
+		 *
+		 * 	core_clk / (SPR * 2 ** SPPR)
+		 *
+		 * is as big as possible but not bigger than speed.
+		 */
+
+		/* best integer divider: */
+		unsigned divider = DIV_ROUND_UP(tclk_hz, speed);
+		unsigned spr, sppr;
+
+		if (divider < 16) {
+			/* This is the easy case, divider is less than 16 */
+			spr = divider;
+			sppr = 0;
+
+		} else {
+			unsigned two_pow_sppr;
+			/*
+			 * Find the highest bit set in divider. This and the
+			 * three next bits define SPR (apart from rounding).
+			 * SPPR is then the number of zero bits that must be
+			 * appended:
+			 */
+			sppr = fls(divider) - 4;
+
+			/*
+			 * As SPR only has 4 bits, we have to round divider up
+			 * to the next multiple of 2 ** sppr.
+			 */
+			two_pow_sppr = 1 << sppr;
+			divider = (divider + two_pow_sppr - 1) & -two_pow_sppr;
+
+			/*
+			 * recalculate sppr as rounding up divider might have
+			 * increased it enough to change the position of the
+			 * highest set bit. In this case the bit that now
+			 * doesn't make it into SPR is 0, so there is no need to
+			 * round again.
+			 */
+			sppr = fls(divider) - 4;
+			spr = divider >> sppr;
+
+			/*
+			 * Now do range checking. SPR is constructed to have a
+			 * width of 4 bits, so this is fine for sure. So we
+			 * still need to check for sppr to fit into 3 bits:
+			 */
+			if (sppr > 7)
+				return -EINVAL;
+		}
+
+		prescale = ((sppr & 0x6) << 5) | ((sppr & 0x1) << 4) | spr;
+	} else {
+		/*
+		 * the supported rates are: 4,6,8...30
+		 * round up as we look for equal or less speed
+		 */
+		rate = DIV_ROUND_UP(tclk_hz, speed);
+		rate = roundup(rate, 2);
+
+		/* check if requested speed is too small */
+		if (rate > 30)
+			return -EINVAL;
+
+		if (rate < 4)
+			rate = 4;
+
+		/* Convert the rate to SPI clock divisor value.	*/
+		prescale = 0x10 + rate/2;
+	}
+
+	reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG));
+	reg = ((reg & ~devdata->prescale_mask) | prescale);
+	writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG));
+
+	return 0;
+}
+
+static void
+orion_spi_mode_set(struct spi_device *spi)
+{
+	u32 reg;
+	struct orion_spi *orion_spi;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+
+	reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG));
+	reg &= ~ORION_SPI_MODE_MASK;
+	if (spi->mode & SPI_CPOL)
+		reg |= ORION_SPI_MODE_CPOL;
+	if (spi->mode & SPI_CPHA)
+		reg |= ORION_SPI_MODE_CPHA;
+	if (spi->mode & SPI_LSB_FIRST)
+		reg |= ORION_SPI_IF_RXLSBF | ORION_SPI_IF_TXLSBF;
+	else
+		reg &= ~(ORION_SPI_IF_RXLSBF | ORION_SPI_IF_TXLSBF);
+
+	writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG));
+}
+
+static void
+orion_spi_50mhz_ac_timing_erratum(struct spi_device *spi, unsigned int speed)
+{
+	u32 reg;
+	struct orion_spi *orion_spi;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+
+	/*
+	 * Erratum description: (Erratum NO. FE-9144572) The device
+	 * SPI interface supports frequencies of up to 50 MHz.
+	 * However, due to this erratum, when the device core clock is
+	 * 250 MHz and the SPI interfaces is configured for 50MHz SPI
+	 * clock and CPOL=CPHA=1 there might occur data corruption on
+	 * reads from the SPI device.
+	 * Erratum Workaround:
+	 * Work in one of the following configurations:
+	 * 1. Set CPOL=CPHA=0 in "SPI Interface Configuration
+	 * Register".
+	 * 2. Set TMISO_SAMPLE value to 0x2 in "SPI Timing Parameters 1
+	 * Register" before setting the interface.
+	 */
+	reg = readl(spi_reg(orion_spi, ORION_SPI_TIMING_PARAMS_REG));
+	reg &= ~ORION_SPI_TMISO_SAMPLE_MASK;
+
+	if (clk_get_rate(orion_spi->clk) == 250000000 &&
+			speed == 50000000 && spi->mode & SPI_CPOL &&
+			spi->mode & SPI_CPHA)
+		reg |= ORION_SPI_TMISO_SAMPLE_2;
+	else
+		reg |= ORION_SPI_TMISO_SAMPLE_1; /* This is the default value */
+
+	writel(reg, spi_reg(orion_spi, ORION_SPI_TIMING_PARAMS_REG));
+}
+
+/*
+ * called only when no transfer is active on the bus
+ */
+static int
+orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
+{
+	struct orion_spi *orion_spi;
+	unsigned int speed = spi->max_speed_hz;
+	unsigned int bits_per_word = spi->bits_per_word;
+	int	rc;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+
+	if ((t != NULL) && t->speed_hz)
+		speed = t->speed_hz;
+
+	if ((t != NULL) && t->bits_per_word)
+		bits_per_word = t->bits_per_word;
+
+	orion_spi_mode_set(spi);
+
+	if (orion_spi->devdata->is_errata_50mhz_ac)
+		orion_spi_50mhz_ac_timing_erratum(spi, speed);
+
+	rc = orion_spi_baudrate_set(spi, speed);
+	if (rc)
+		return rc;
+
+	if (bits_per_word == 16)
+		orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG,
+				  ORION_SPI_IF_8_16_BIT_MODE);
+	else
+		orion_spi_clrbits(orion_spi, ORION_SPI_IF_CONFIG_REG,
+				  ORION_SPI_IF_8_16_BIT_MODE);
+
+	return 0;
+}
+
+static void orion_spi_set_cs(struct spi_device *spi, bool enable)
+{
+	struct orion_spi *orion_spi;
+	void __iomem *ctrl_reg;
+	u32 val;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+	ctrl_reg = spi_reg(orion_spi, ORION_SPI_IF_CTRL_REG);
+
+	val = readl(ctrl_reg);
+
+	/* Clear existing chip-select and assertion state */
+	val &= ~(ORION_SPI_CS_MASK | 0x1);
+
+	/*
+	 * If this line is using a GPIO to control chip select, this internal
+	 * .set_cs() function will still be called, so we clear any previous
+	 * chip select. The CS we activate will not have any elecrical effect,
+	 * as it is handled by a GPIO, but that doesn't matter. What we need
+	 * is to deassert the old chip select and assert some other chip select.
+	 */
+	val |= ORION_SPI_CS(spi->chip_select);
+
+	/*
+	 * Chip select logic is inverted from spi_set_cs(). For lines using a
+	 * GPIO to do chip select SPI_CS_HIGH is enforced and inversion happens
+	 * in the GPIO library, but we don't care about that, because in those
+	 * cases we are dealing with an unused native CS anyways so the polarity
+	 * doesn't matter.
+	 */
+	if (!enable)
+		val |= 0x1;
+
+	/*
+	 * To avoid toggling unwanted chip selects update the register
+	 * with a single write.
+	 */
+	writel(val, ctrl_reg);
+}
+
+static inline int orion_spi_wait_till_ready(struct orion_spi *orion_spi)
+{
+	int i;
+
+	for (i = 0; i < ORION_SPI_WAIT_RDY_MAX_LOOP; i++) {
+		if (readl(spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG)))
+			return 1;
+
+		udelay(1);
+	}
+
+	return -1;
+}
+
+static inline int
+orion_spi_write_read_8bit(struct spi_device *spi,
+			  const u8 **tx_buf, u8 **rx_buf)
+{
+	void __iomem *tx_reg, *rx_reg, *int_reg;
+	struct orion_spi *orion_spi;
+	bool cs_single_byte;
+
+	cs_single_byte = spi->mode & SPI_CS_WORD;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+
+	if (cs_single_byte)
+		orion_spi_set_cs(spi, 0);
+
+	tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG);
+	rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG);
+	int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG);
+
+	/* clear the interrupt cause register */
+	writel(0x0, int_reg);
+
+	if (tx_buf && *tx_buf)
+		writel(*(*tx_buf)++, tx_reg);
+	else
+		writel(0, tx_reg);
+
+	if (orion_spi_wait_till_ready(orion_spi) < 0) {
+		if (cs_single_byte) {
+			orion_spi_set_cs(spi, 1);
+			/* Satisfy some SLIC devices requirements */
+			udelay(4);
+		}
+		dev_err(&spi->dev, "TXS timed out\n");
+		return -1;
+	}
+
+	if (rx_buf && *rx_buf)
+		*(*rx_buf)++ = readl(rx_reg);
+
+	if (cs_single_byte) {
+		orion_spi_set_cs(spi, 1);
+		/* Satisfy some SLIC devices requirements */
+		udelay(4);
+	}
+
+	return 1;
+}
+
+static inline int
+orion_spi_write_read_16bit(struct spi_device *spi,
+			   const u16 **tx_buf, u16 **rx_buf)
+{
+	void __iomem *tx_reg, *rx_reg, *int_reg;
+	struct orion_spi *orion_spi;
+
+	if (spi->mode & SPI_CS_WORD) {
+		dev_err(&spi->dev, "SPI_CS_WORD is only supported for 8 bit words\n");
+		return -1;
+	}
+
+	orion_spi = spi_master_get_devdata(spi->master);
+	tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG);
+	rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG);
+	int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG);
+
+	/* clear the interrupt cause register */
+	writel(0x0, int_reg);
+
+	if (tx_buf && *tx_buf)
+		writel(__cpu_to_le16(get_unaligned((*tx_buf)++)), tx_reg);
+	else
+		writel(0, tx_reg);
+
+	if (orion_spi_wait_till_ready(orion_spi) < 0) {
+		dev_err(&spi->dev, "TXS timed out\n");
+		return -1;
+	}
+
+	if (rx_buf && *rx_buf)
+		put_unaligned(__le16_to_cpu(readl(rx_reg)), (*rx_buf)++);
+
+	return 1;
+}
+
+static unsigned int
+orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
+{
+	unsigned int count;
+	int word_len;
+	struct orion_spi *orion_spi;
+	int cs = spi->chip_select;
+	void __iomem *vaddr;
+
+	word_len = spi->bits_per_word;
+	count = xfer->len;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+
+	/*
+	 * Use SPI direct write mode if base address is available
+	 * and SPI_CS_WORD flag is not set.
+	 * Otherwise fall back to PIO mode for this transfer.
+	 */
+	vaddr = orion_spi->child[cs].direct_access.vaddr;
+
+	if (vaddr && xfer->tx_buf && word_len == 8 && (spi->mode & SPI_CS_WORD) == 0) {
+		unsigned int cnt = count / 4;
+		unsigned int rem = count % 4;
+
+		/*
+		 * Send the TX-data to the SPI device via the direct
+		 * mapped address window
+		 */
+		iowrite32_rep(vaddr, xfer->tx_buf, cnt);
+		if (rem) {
+			u32 *buf = (u32 *)xfer->tx_buf;
+
+			iowrite8_rep(vaddr, &buf[cnt], rem);
+		}
+
+		return count;
+	}
+
+	if (word_len == 8) {
+		const u8 *tx = xfer->tx_buf;
+		u8 *rx = xfer->rx_buf;
+
+		do {
+			if (orion_spi_write_read_8bit(spi, &tx, &rx) < 0)
+				goto out;
+			count--;
+			spi_delay_exec(&xfer->word_delay, xfer);
+		} while (count);
+	} else if (word_len == 16) {
+		const u16 *tx = xfer->tx_buf;
+		u16 *rx = xfer->rx_buf;
+
+		do {
+			if (orion_spi_write_read_16bit(spi, &tx, &rx) < 0)
+				goto out;
+			count -= 2;
+			spi_delay_exec(&xfer->word_delay, xfer);
+		} while (count);
+	}
+
+out:
+	return xfer->len - count;
+}
+
+static int orion_spi_transfer_one(struct spi_master *master,
+					struct spi_device *spi,
+					struct spi_transfer *t)
+{
+	int status = 0;
+
+	status = orion_spi_setup_transfer(spi, t);
+	if (status < 0)
+		return status;
+
+	if (t->len)
+		orion_spi_write_read(spi, t);
+
+	return status;
+}
+
+static int orion_spi_setup(struct spi_device *spi)
+{
+	int ret;
+#ifdef CONFIG_PM
+	struct orion_spi *orion_spi = spi_master_get_devdata(spi->master);
+	struct device *dev = orion_spi->dev;
+
+	orion_spi_runtime_resume(dev);
+#endif
+
+	ret = orion_spi_setup_transfer(spi, NULL);
+
+#ifdef CONFIG_PM
+	orion_spi_runtime_suspend(dev);
+#endif
+
+	return ret;
+}
+
+static int orion_spi_reset(struct orion_spi *orion_spi)
+{
+	/* Verify that the CS is deasserted */
+	orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1);
+
+	/* Don't deassert CS between the direct mapped SPI transfers */
+	writel(0, spi_reg(orion_spi, SPI_DIRECT_WRITE_CONFIG_REG));
+
+	return 0;
+}
+
+static const struct orion_spi_dev orion_spi_dev_data = {
+	.typ = ORION_SPI,
+	.min_divisor = 4,
+	.max_divisor = 30,
+	.prescale_mask = ORION_SPI_CLK_PRESCALE_MASK,
+};
+
+static const struct orion_spi_dev armada_370_spi_dev_data = {
+	.typ = ARMADA_SPI,
+	.min_divisor = 4,
+	.max_divisor = 1920,
+	.max_hz = 50000000,
+	.prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
+};
+
+static const struct orion_spi_dev armada_xp_spi_dev_data = {
+	.typ = ARMADA_SPI,
+	.max_hz = 50000000,
+	.max_divisor = 1920,
+	.prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
+};
+
+static const struct orion_spi_dev armada_375_spi_dev_data = {
+	.typ = ARMADA_SPI,
+	.min_divisor = 15,
+	.max_divisor = 1920,
+	.prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
+};
+
+static const struct orion_spi_dev armada_380_spi_dev_data = {
+	.typ = ARMADA_SPI,
+	.max_hz = 50000000,
+	.max_divisor = 1920,
+	.prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
+	.is_errata_50mhz_ac = true,
+};
+
+static const struct of_device_id orion_spi_of_match_table[] = {
+	{
+		.compatible = "marvell,orion-spi",
+		.data = &orion_spi_dev_data,
+	},
+	{
+		.compatible = "marvell,armada-370-spi",
+		.data = &armada_370_spi_dev_data,
+	},
+	{
+		.compatible = "marvell,armada-375-spi",
+		.data = &armada_375_spi_dev_data,
+	},
+	{
+		.compatible = "marvell,armada-380-spi",
+		.data = &armada_380_spi_dev_data,
+	},
+	{
+		.compatible = "marvell,armada-390-spi",
+		.data = &armada_xp_spi_dev_data,
+	},
+	{
+		.compatible = "marvell,armada-xp-spi",
+		.data = &armada_xp_spi_dev_data,
+	},
+
+	{}
+};
+MODULE_DEVICE_TABLE(of, orion_spi_of_match_table);
+
+static int orion_spi_probe(struct platform_device *pdev)
+{
+	const struct orion_spi_dev *devdata;
+	struct spi_master *master;
+	struct orion_spi *spi;
+	struct resource *r;
+	unsigned long tclk_hz;
+	int status = 0;
+	struct device_node *np;
+
+	master = spi_alloc_master(&pdev->dev, sizeof(*spi));
+	if (master == NULL) {
+		dev_dbg(&pdev->dev, "master allocation failed\n");
+		return -ENOMEM;
+	}
+
+	if (pdev->id != -1)
+		master->bus_num = pdev->id;
+	if (pdev->dev.of_node) {
+		u32 cell_index;
+
+		if (!of_property_read_u32(pdev->dev.of_node, "cell-index",
+					  &cell_index))
+			master->bus_num = cell_index;
+	}
+
+	/* we support all 4 SPI modes and LSB first option */
+	master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST | SPI_CS_WORD;
+	master->set_cs = orion_spi_set_cs;
+	master->transfer_one = orion_spi_transfer_one;
+	master->num_chipselect = ORION_NUM_CHIPSELECTS;
+	master->setup = orion_spi_setup;
+	master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
+	master->auto_runtime_pm = true;
+	master->use_gpio_descriptors = true;
+	master->flags = SPI_MASTER_GPIO_SS;
+
+	platform_set_drvdata(pdev, master);
+
+	spi = spi_master_get_devdata(master);
+	spi->master = master;
+	spi->dev = &pdev->dev;
+
+	devdata = device_get_match_data(&pdev->dev);
+	devdata = devdata ? devdata : &orion_spi_dev_data;
+	spi->devdata = devdata;
+
+	spi->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(spi->clk)) {
+		status = PTR_ERR(spi->clk);
+		goto out;
+	}
+
+	status = clk_prepare_enable(spi->clk);
+	if (status)
+		goto out;
+
+	/* The following clock is only used by some SoCs */
+	spi->axi_clk = devm_clk_get(&pdev->dev, "axi");
+	if (PTR_ERR(spi->axi_clk) == -EPROBE_DEFER) {
+		status = -EPROBE_DEFER;
+		goto out_rel_clk;
+	}
+	if (!IS_ERR(spi->axi_clk))
+		clk_prepare_enable(spi->axi_clk);
+
+	tclk_hz = clk_get_rate(spi->clk);
+
+	/*
+	 * With old device tree, armada-370-spi could be used with
+	 * Armada XP, however for this SoC the maximum frequency is
+	 * 50MHz instead of tclk/4. On Armada 370, tclk cannot be
+	 * higher than 200MHz. So, in order to be able to handle both
+	 * SoCs, we can take the minimum of 50MHz and tclk/4.
+	 */
+	if (of_device_is_compatible(pdev->dev.of_node,
+					"marvell,armada-370-spi"))
+		master->max_speed_hz = min(devdata->max_hz,
+				DIV_ROUND_UP(tclk_hz, devdata->min_divisor));
+	else if (devdata->min_divisor)
+		master->max_speed_hz =
+			DIV_ROUND_UP(tclk_hz, devdata->min_divisor);
+	else
+		master->max_speed_hz = devdata->max_hz;
+	master->min_speed_hz = DIV_ROUND_UP(tclk_hz, devdata->max_divisor);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	spi->base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(spi->base)) {
+		status = PTR_ERR(spi->base);
+		goto out_rel_axi_clk;
+	}
+
+	for_each_available_child_of_node(pdev->dev.of_node, np) {
+		struct orion_direct_acc *dir_acc;
+		u32 cs;
+
+		/* Get chip-select number from the "reg" property */
+		status = of_property_read_u32(np, "reg", &cs);
+		if (status) {
+			dev_err(&pdev->dev,
+				"%pOF has no valid 'reg' property (%d)\n",
+				np, status);
+			continue;
+		}
+
+		/*
+		 * Check if an address is configured for this SPI device. If
+		 * not, the MBus mapping via the 'ranges' property in the 'soc'
+		 * node is not configured and this device should not use the
+		 * direct mode. In this case, just continue with the next
+		 * device.
+		 */
+		status = of_address_to_resource(pdev->dev.of_node, cs + 1, r);
+		if (status)
+			continue;
+
+		/*
+		 * Only map one page for direct access. This is enough for the
+		 * simple TX transfer which only writes to the first word.
+		 * This needs to get extended for the direct SPI NOR / SPI NAND
+		 * support, once this gets implemented.
+		 */
+		dir_acc = &spi->child[cs].direct_access;
+		dir_acc->vaddr = devm_ioremap(&pdev->dev, r->start, PAGE_SIZE);
+		if (!dir_acc->vaddr) {
+			status = -ENOMEM;
+			of_node_put(np);
+			goto out_rel_axi_clk;
+		}
+		dir_acc->size = PAGE_SIZE;
+
+		dev_info(&pdev->dev, "CS%d configured for direct access\n", cs);
+	}
+
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
+	pm_runtime_enable(&pdev->dev);
+
+	status = orion_spi_reset(spi);
+	if (status < 0)
+		goto out_rel_pm;
+
+	master->dev.of_node = pdev->dev.of_node;
+	status = spi_register_master(master);
+	if (status < 0)
+		goto out_rel_pm;
+
+	return status;
+
+out_rel_pm:
+	pm_runtime_disable(&pdev->dev);
+out_rel_axi_clk:
+	clk_disable_unprepare(spi->axi_clk);
+out_rel_clk:
+	clk_disable_unprepare(spi->clk);
+out:
+	spi_master_put(master);
+	return status;
+}
+
+
+static int orion_spi_remove(struct platform_device *pdev)
+{
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct orion_spi *spi = spi_master_get_devdata(master);
+
+	pm_runtime_get_sync(&pdev->dev);
+	clk_disable_unprepare(spi->axi_clk);
+	clk_disable_unprepare(spi->clk);
+
+	spi_unregister_master(master);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+MODULE_ALIAS("platform:" DRIVER_NAME);
+
+#ifdef CONFIG_PM
+static int orion_spi_runtime_suspend(struct device *dev)
+{
+	struct spi_master *master = dev_get_drvdata(dev);
+	struct orion_spi *spi = spi_master_get_devdata(master);
+
+	clk_disable_unprepare(spi->axi_clk);
+	clk_disable_unprepare(spi->clk);
+	return 0;
+}
+
+static int orion_spi_runtime_resume(struct device *dev)
+{
+	struct spi_master *master = dev_get_drvdata(dev);
+	struct orion_spi *spi = spi_master_get_devdata(master);
+
+	if (!IS_ERR(spi->axi_clk))
+		clk_prepare_enable(spi->axi_clk);
+	return clk_prepare_enable(spi->clk);
+}
+#endif
+
+static const struct dev_pm_ops orion_spi_pm_ops = {
+	SET_RUNTIME_PM_OPS(orion_spi_runtime_suspend,
+			   orion_spi_runtime_resume,
+			   NULL)
+};
+
+static struct platform_driver orion_spi_driver = {
+	.driver = {
+		.name	= DRIVER_NAME,
+		.pm	= &orion_spi_pm_ops,
+		.of_match_table = of_match_ptr(orion_spi_of_match_table),
+	},
+	.probe		= orion_spi_probe,
+	.remove		= orion_spi_remove,
+};
+
+module_platform_driver(orion_spi_driver);
+
+MODULE_DESCRIPTION("Orion SPI driver");
+MODULE_AUTHOR("Shadi Ammouri <shadi@marvell.com>");
+MODULE_LICENSE("GPL");