Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 2047 insertions, 0 deletions

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
new file mode 100644
index 000000000..122418155
--- /dev/null
+++ b/drivers/spi/spi-stm32.c
@@ -0,0 +1,2047 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// STMicroelectronics STM32 SPI Controller driver (master mode only)
+//
+// Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+// Author(s): Amelie Delaunay <amelie.delaunay@st.com> for STMicroelectronics.
+
+#include <linux/bitfield.h>
+#include <linux/debugfs.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/spi/spi.h>
+
+#define DRIVER_NAME "spi_stm32"
+
+/* STM32F4 SPI registers */
+#define STM32F4_SPI_CR1			0x00
+#define STM32F4_SPI_CR2			0x04
+#define STM32F4_SPI_SR			0x08
+#define STM32F4_SPI_DR			0x0C
+#define STM32F4_SPI_I2SCFGR		0x1C
+
+/* STM32F4_SPI_CR1 bit fields */
+#define STM32F4_SPI_CR1_CPHA		BIT(0)
+#define STM32F4_SPI_CR1_CPOL		BIT(1)
+#define STM32F4_SPI_CR1_MSTR		BIT(2)
+#define STM32F4_SPI_CR1_BR_SHIFT	3
+#define STM32F4_SPI_CR1_BR		GENMASK(5, 3)
+#define STM32F4_SPI_CR1_SPE		BIT(6)
+#define STM32F4_SPI_CR1_LSBFRST		BIT(7)
+#define STM32F4_SPI_CR1_SSI		BIT(8)
+#define STM32F4_SPI_CR1_SSM		BIT(9)
+#define STM32F4_SPI_CR1_RXONLY		BIT(10)
+#define STM32F4_SPI_CR1_DFF		BIT(11)
+#define STM32F4_SPI_CR1_CRCNEXT		BIT(12)
+#define STM32F4_SPI_CR1_CRCEN		BIT(13)
+#define STM32F4_SPI_CR1_BIDIOE		BIT(14)
+#define STM32F4_SPI_CR1_BIDIMODE	BIT(15)
+#define STM32F4_SPI_CR1_BR_MIN		0
+#define STM32F4_SPI_CR1_BR_MAX		(GENMASK(5, 3) >> 3)
+
+/* STM32F4_SPI_CR2 bit fields */
+#define STM32F4_SPI_CR2_RXDMAEN		BIT(0)
+#define STM32F4_SPI_CR2_TXDMAEN		BIT(1)
+#define STM32F4_SPI_CR2_SSOE		BIT(2)
+#define STM32F4_SPI_CR2_FRF		BIT(4)
+#define STM32F4_SPI_CR2_ERRIE		BIT(5)
+#define STM32F4_SPI_CR2_RXNEIE		BIT(6)
+#define STM32F4_SPI_CR2_TXEIE		BIT(7)
+
+/* STM32F4_SPI_SR bit fields */
+#define STM32F4_SPI_SR_RXNE		BIT(0)
+#define STM32F4_SPI_SR_TXE		BIT(1)
+#define STM32F4_SPI_SR_CHSIDE		BIT(2)
+#define STM32F4_SPI_SR_UDR		BIT(3)
+#define STM32F4_SPI_SR_CRCERR		BIT(4)
+#define STM32F4_SPI_SR_MODF		BIT(5)
+#define STM32F4_SPI_SR_OVR		BIT(6)
+#define STM32F4_SPI_SR_BSY		BIT(7)
+#define STM32F4_SPI_SR_FRE		BIT(8)
+
+/* STM32F4_SPI_I2SCFGR bit fields */
+#define STM32F4_SPI_I2SCFGR_I2SMOD	BIT(11)
+
+/* STM32F4 SPI Baud Rate min/max divisor */
+#define STM32F4_SPI_BR_DIV_MIN		(2 << STM32F4_SPI_CR1_BR_MIN)
+#define STM32F4_SPI_BR_DIV_MAX		(2 << STM32F4_SPI_CR1_BR_MAX)
+
+/* STM32H7 SPI registers */
+#define STM32H7_SPI_CR1			0x00
+#define STM32H7_SPI_CR2			0x04
+#define STM32H7_SPI_CFG1		0x08
+#define STM32H7_SPI_CFG2		0x0C
+#define STM32H7_SPI_IER			0x10
+#define STM32H7_SPI_SR			0x14
+#define STM32H7_SPI_IFCR		0x18
+#define STM32H7_SPI_TXDR		0x20
+#define STM32H7_SPI_RXDR		0x30
+#define STM32H7_SPI_I2SCFGR		0x50
+
+/* STM32H7_SPI_CR1 bit fields */
+#define STM32H7_SPI_CR1_SPE		BIT(0)
+#define STM32H7_SPI_CR1_MASRX		BIT(8)
+#define STM32H7_SPI_CR1_CSTART		BIT(9)
+#define STM32H7_SPI_CR1_CSUSP		BIT(10)
+#define STM32H7_SPI_CR1_HDDIR		BIT(11)
+#define STM32H7_SPI_CR1_SSI		BIT(12)
+
+/* STM32H7_SPI_CR2 bit fields */
+#define STM32H7_SPI_CR2_TSIZE		GENMASK(15, 0)
+#define STM32H7_SPI_TSIZE_MAX		GENMASK(15, 0)
+
+/* STM32H7_SPI_CFG1 bit fields */
+#define STM32H7_SPI_CFG1_DSIZE		GENMASK(4, 0)
+#define STM32H7_SPI_CFG1_FTHLV		GENMASK(8, 5)
+#define STM32H7_SPI_CFG1_RXDMAEN	BIT(14)
+#define STM32H7_SPI_CFG1_TXDMAEN	BIT(15)
+#define STM32H7_SPI_CFG1_MBR		GENMASK(30, 28)
+#define STM32H7_SPI_CFG1_MBR_SHIFT	28
+#define STM32H7_SPI_CFG1_MBR_MIN	0
+#define STM32H7_SPI_CFG1_MBR_MAX	(GENMASK(30, 28) >> 28)
+
+/* STM32H7_SPI_CFG2 bit fields */
+#define STM32H7_SPI_CFG2_MIDI		GENMASK(7, 4)
+#define STM32H7_SPI_CFG2_COMM		GENMASK(18, 17)
+#define STM32H7_SPI_CFG2_SP		GENMASK(21, 19)
+#define STM32H7_SPI_CFG2_MASTER		BIT(22)
+#define STM32H7_SPI_CFG2_LSBFRST	BIT(23)
+#define STM32H7_SPI_CFG2_CPHA		BIT(24)
+#define STM32H7_SPI_CFG2_CPOL		BIT(25)
+#define STM32H7_SPI_CFG2_SSM		BIT(26)
+#define STM32H7_SPI_CFG2_AFCNTR		BIT(31)
+
+/* STM32H7_SPI_IER bit fields */
+#define STM32H7_SPI_IER_RXPIE		BIT(0)
+#define STM32H7_SPI_IER_TXPIE		BIT(1)
+#define STM32H7_SPI_IER_DXPIE		BIT(2)
+#define STM32H7_SPI_IER_EOTIE		BIT(3)
+#define STM32H7_SPI_IER_TXTFIE		BIT(4)
+#define STM32H7_SPI_IER_OVRIE		BIT(6)
+#define STM32H7_SPI_IER_MODFIE		BIT(9)
+#define STM32H7_SPI_IER_ALL		GENMASK(10, 0)
+
+/* STM32H7_SPI_SR bit fields */
+#define STM32H7_SPI_SR_RXP		BIT(0)
+#define STM32H7_SPI_SR_TXP		BIT(1)
+#define STM32H7_SPI_SR_EOT		BIT(3)
+#define STM32H7_SPI_SR_OVR		BIT(6)
+#define STM32H7_SPI_SR_MODF		BIT(9)
+#define STM32H7_SPI_SR_SUSP		BIT(11)
+#define STM32H7_SPI_SR_RXPLVL		GENMASK(14, 13)
+#define STM32H7_SPI_SR_RXWNE		BIT(15)
+
+/* STM32H7_SPI_IFCR bit fields */
+#define STM32H7_SPI_IFCR_ALL		GENMASK(11, 3)
+
+/* STM32H7_SPI_I2SCFGR bit fields */
+#define STM32H7_SPI_I2SCFGR_I2SMOD	BIT(0)
+
+/* STM32H7 SPI Master Baud Rate min/max divisor */
+#define STM32H7_SPI_MBR_DIV_MIN		(2 << STM32H7_SPI_CFG1_MBR_MIN)
+#define STM32H7_SPI_MBR_DIV_MAX		(2 << STM32H7_SPI_CFG1_MBR_MAX)
+
+/* STM32H7 SPI Communication mode */
+#define STM32H7_SPI_FULL_DUPLEX		0
+#define STM32H7_SPI_SIMPLEX_TX		1
+#define STM32H7_SPI_SIMPLEX_RX		2
+#define STM32H7_SPI_HALF_DUPLEX		3
+
+/* SPI Communication type */
+#define SPI_FULL_DUPLEX		0
+#define SPI_SIMPLEX_TX		1
+#define SPI_SIMPLEX_RX		2
+#define SPI_3WIRE_TX		3
+#define SPI_3WIRE_RX		4
+
+#define STM32_SPI_AUTOSUSPEND_DELAY		1	/* 1 ms */
+
+/*
+ * use PIO for small transfers, avoiding DMA setup/teardown overhead for drivers
+ * without fifo buffers.
+ */
+#define SPI_DMA_MIN_BYTES	16
+
+/**
+ * struct stm32_spi_reg - stm32 SPI register & bitfield desc
+ * @reg:		register offset
+ * @mask:		bitfield mask
+ * @shift:		left shift
+ */
+struct stm32_spi_reg {
+	int reg;
+	int mask;
+	int shift;
+};
+
+/**
+ * struct stm32_spi_regspec - stm32 registers definition, compatible dependent data
+ * @en: enable register and SPI enable bit
+ * @dma_rx_en: SPI DMA RX enable register end SPI DMA RX enable bit
+ * @dma_tx_en: SPI DMA TX enable register end SPI DMA TX enable bit
+ * @cpol: clock polarity register and polarity bit
+ * @cpha: clock phase register and phase bit
+ * @lsb_first: LSB transmitted first register and bit
+ * @br: baud rate register and bitfields
+ * @rx: SPI RX data register
+ * @tx: SPI TX data register
+ */
+struct stm32_spi_regspec {
+	const struct stm32_spi_reg en;
+	const struct stm32_spi_reg dma_rx_en;
+	const struct stm32_spi_reg dma_tx_en;
+	const struct stm32_spi_reg cpol;
+	const struct stm32_spi_reg cpha;
+	const struct stm32_spi_reg lsb_first;
+	const struct stm32_spi_reg br;
+	const struct stm32_spi_reg rx;
+	const struct stm32_spi_reg tx;
+};
+
+struct stm32_spi;
+
+/**
+ * struct stm32_spi_cfg - stm32 compatible configuration data
+ * @regs: registers descriptions
+ * @get_fifo_size: routine to get fifo size
+ * @get_bpw_mask: routine to get bits per word mask
+ * @disable: routine to disable controller
+ * @config: routine to configure controller as SPI Master
+ * @set_bpw: routine to configure registers to for bits per word
+ * @set_mode: routine to configure registers to desired mode
+ * @set_data_idleness: optional routine to configure registers to desired idle
+ * time between frames (if driver has this functionality)
+ * @set_number_of_data: optional routine to configure registers to desired
+ * number of data (if driver has this functionality)
+ * @transfer_one_dma_start: routine to start transfer a single spi_transfer
+ * using DMA
+ * @dma_rx_cb: routine to call after DMA RX channel operation is complete
+ * @dma_tx_cb: routine to call after DMA TX channel operation is complete
+ * @transfer_one_irq: routine to configure interrupts for driver
+ * @irq_handler_event: Interrupt handler for SPI controller events
+ * @irq_handler_thread: thread of interrupt handler for SPI controller
+ * @baud_rate_div_min: minimum baud rate divisor
+ * @baud_rate_div_max: maximum baud rate divisor
+ * @has_fifo: boolean to know if fifo is used for driver
+ * @flags: compatible specific SPI controller flags used at registration time
+ */
+struct stm32_spi_cfg {
+	const struct stm32_spi_regspec *regs;
+	int (*get_fifo_size)(struct stm32_spi *spi);
+	int (*get_bpw_mask)(struct stm32_spi *spi);
+	void (*disable)(struct stm32_spi *spi);
+	int (*config)(struct stm32_spi *spi);
+	void (*set_bpw)(struct stm32_spi *spi);
+	int (*set_mode)(struct stm32_spi *spi, unsigned int comm_type);
+	void (*set_data_idleness)(struct stm32_spi *spi, u32 length);
+	int (*set_number_of_data)(struct stm32_spi *spi, u32 length);
+	void (*transfer_one_dma_start)(struct stm32_spi *spi);
+	void (*dma_rx_cb)(void *data);
+	void (*dma_tx_cb)(void *data);
+	int (*transfer_one_irq)(struct stm32_spi *spi);
+	irqreturn_t (*irq_handler_event)(int irq, void *dev_id);
+	irqreturn_t (*irq_handler_thread)(int irq, void *dev_id);
+	unsigned int baud_rate_div_min;
+	unsigned int baud_rate_div_max;
+	bool has_fifo;
+	u16 flags;
+};
+
+/**
+ * struct stm32_spi - private data of the SPI controller
+ * @dev: driver model representation of the controller
+ * @master: controller master interface
+ * @cfg: compatible configuration data
+ * @base: virtual memory area
+ * @clk: hw kernel clock feeding the SPI clock generator
+ * @clk_rate: rate of the hw kernel clock feeding the SPI clock generator
+ * @lock: prevent I/O concurrent access
+ * @irq: SPI controller interrupt line
+ * @fifo_size: size of the embedded fifo in bytes
+ * @cur_midi: master inter-data idleness in ns
+ * @cur_speed: speed configured in Hz
+ * @cur_half_period: time of a half bit in us
+ * @cur_bpw: number of bits in a single SPI data frame
+ * @cur_fthlv: fifo threshold level (data frames in a single data packet)
+ * @cur_comm: SPI communication mode
+ * @cur_xferlen: current transfer length in bytes
+ * @cur_usedma: boolean to know if dma is used in current transfer
+ * @tx_buf: data to be written, or NULL
+ * @rx_buf: data to be read, or NULL
+ * @tx_len: number of data to be written in bytes
+ * @rx_len: number of data to be read in bytes
+ * @dma_tx: dma channel for TX transfer
+ * @dma_rx: dma channel for RX transfer
+ * @phys_addr: SPI registers physical base address
+ */
+struct stm32_spi {
+	struct device *dev;
+	struct spi_master *master;
+	const struct stm32_spi_cfg *cfg;
+	void __iomem *base;
+	struct clk *clk;
+	u32 clk_rate;
+	spinlock_t lock; /* prevent I/O concurrent access */
+	int irq;
+	unsigned int fifo_size;
+
+	unsigned int cur_midi;
+	unsigned int cur_speed;
+	unsigned int cur_half_period;
+	unsigned int cur_bpw;
+	unsigned int cur_fthlv;
+	unsigned int cur_comm;
+	unsigned int cur_xferlen;
+	bool cur_usedma;
+
+	const void *tx_buf;
+	void *rx_buf;
+	int tx_len;
+	int rx_len;
+	struct dma_chan *dma_tx;
+	struct dma_chan *dma_rx;
+	dma_addr_t phys_addr;
+};
+
+static const struct stm32_spi_regspec stm32f4_spi_regspec = {
+	.en = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_SPE },
+
+	.dma_rx_en = { STM32F4_SPI_CR2, STM32F4_SPI_CR2_RXDMAEN },
+	.dma_tx_en = { STM32F4_SPI_CR2, STM32F4_SPI_CR2_TXDMAEN },
+
+	.cpol = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_CPOL },
+	.cpha = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_CPHA },
+	.lsb_first = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_LSBFRST },
+	.br = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_BR, STM32F4_SPI_CR1_BR_SHIFT },
+
+	.rx = { STM32F4_SPI_DR },
+	.tx = { STM32F4_SPI_DR },
+};
+
+static const struct stm32_spi_regspec stm32h7_spi_regspec = {
+	/* SPI data transfer is enabled but spi_ker_ck is idle.
+	 * CFG1 and CFG2 registers are write protected when SPE is enabled.
+	 */
+	.en = { STM32H7_SPI_CR1, STM32H7_SPI_CR1_SPE },
+
+	.dma_rx_en = { STM32H7_SPI_CFG1, STM32H7_SPI_CFG1_RXDMAEN },
+	.dma_tx_en = { STM32H7_SPI_CFG1, STM32H7_SPI_CFG1_TXDMAEN },
+
+	.cpol = { STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_CPOL },
+	.cpha = { STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_CPHA },
+	.lsb_first = { STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_LSBFRST },
+	.br = { STM32H7_SPI_CFG1, STM32H7_SPI_CFG1_MBR,
+		STM32H7_SPI_CFG1_MBR_SHIFT },
+
+	.rx = { STM32H7_SPI_RXDR },
+	.tx = { STM32H7_SPI_TXDR },
+};
+
+static inline void stm32_spi_set_bits(struct stm32_spi *spi,
+				      u32 offset, u32 bits)
+{
+	writel_relaxed(readl_relaxed(spi->base + offset) | bits,
+		       spi->base + offset);
+}
+
+static inline void stm32_spi_clr_bits(struct stm32_spi *spi,
+				      u32 offset, u32 bits)
+{
+	writel_relaxed(readl_relaxed(spi->base + offset) & ~bits,
+		       spi->base + offset);
+}
+
+/**
+ * stm32h7_spi_get_fifo_size - Return fifo size
+ * @spi: pointer to the spi controller data structure
+ */
+static int stm32h7_spi_get_fifo_size(struct stm32_spi *spi)
+{
+	unsigned long flags;
+	u32 count = 0;
+
+	spin_lock_irqsave(&spi->lock, flags);
+
+	stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_SPE);
+
+	while (readl_relaxed(spi->base + STM32H7_SPI_SR) & STM32H7_SPI_SR_TXP)
+		writeb_relaxed(++count, spi->base + STM32H7_SPI_TXDR);
+
+	stm32_spi_clr_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_SPE);
+
+	spin_unlock_irqrestore(&spi->lock, flags);
+
+	dev_dbg(spi->dev, "%d x 8-bit fifo size\n", count);
+
+	return count;
+}
+
+/**
+ * stm32f4_spi_get_bpw_mask - Return bits per word mask
+ * @spi: pointer to the spi controller data structure
+ */
+static int stm32f4_spi_get_bpw_mask(struct stm32_spi *spi)
+{
+	dev_dbg(spi->dev, "8-bit or 16-bit data frame supported\n");
+	return SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
+}
+
+/**
+ * stm32h7_spi_get_bpw_mask - Return bits per word mask
+ * @spi: pointer to the spi controller data structure
+ */
+static int stm32h7_spi_get_bpw_mask(struct stm32_spi *spi)
+{
+	unsigned long flags;
+	u32 cfg1, max_bpw;
+
+	spin_lock_irqsave(&spi->lock, flags);
+
+	/*
+	 * The most significant bit at DSIZE bit field is reserved when the
+	 * maximum data size of periperal instances is limited to 16-bit
+	 */
+	stm32_spi_set_bits(spi, STM32H7_SPI_CFG1, STM32H7_SPI_CFG1_DSIZE);
+
+	cfg1 = readl_relaxed(spi->base + STM32H7_SPI_CFG1);
+	max_bpw = FIELD_GET(STM32H7_SPI_CFG1_DSIZE, cfg1) + 1;
+
+	spin_unlock_irqrestore(&spi->lock, flags);
+
+	dev_dbg(spi->dev, "%d-bit maximum data frame\n", max_bpw);
+
+	return SPI_BPW_RANGE_MASK(4, max_bpw);
+}
+
+/**
+ * stm32_spi_prepare_mbr - Determine baud rate divisor value
+ * @spi: pointer to the spi controller data structure
+ * @speed_hz: requested speed
+ * @min_div: minimum baud rate divisor
+ * @max_div: maximum baud rate divisor
+ *
+ * Return baud rate divisor value in case of success or -EINVAL
+ */
+static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz,
+				 u32 min_div, u32 max_div)
+{
+	u32 div, mbrdiv;
+
+	/* Ensure spi->clk_rate is even */
+	div = DIV_ROUND_CLOSEST(spi->clk_rate & ~0x1, speed_hz);
+
+	/*
+	 * SPI framework set xfer->speed_hz to master->max_speed_hz if
+	 * xfer->speed_hz is greater than master->max_speed_hz, and it returns
+	 * an error when xfer->speed_hz is lower than master->min_speed_hz, so
+	 * no need to check it there.
+	 * However, we need to ensure the following calculations.
+	 */
+	if ((div < min_div) || (div > max_div))
+		return -EINVAL;
+
+	/* Determine the first power of 2 greater than or equal to div */
+	if (div & (div - 1))
+		mbrdiv = fls(div);
+	else
+		mbrdiv = fls(div) - 1;
+
+	spi->cur_speed = spi->clk_rate / (1 << mbrdiv);
+
+	spi->cur_half_period = DIV_ROUND_CLOSEST(USEC_PER_SEC, 2 * spi->cur_speed);
+
+	return mbrdiv - 1;
+}
+
+/**
+ * stm32h7_spi_prepare_fthlv - Determine FIFO threshold level
+ * @spi: pointer to the spi controller data structure
+ * @xfer_len: length of the message to be transferred
+ */
+static u32 stm32h7_spi_prepare_fthlv(struct stm32_spi *spi, u32 xfer_len)
+{
+	u32 packet, bpw;
+
+	/* data packet should not exceed 1/2 of fifo space */
+	packet = clamp(xfer_len, 1U, spi->fifo_size / 2);
+
+	/* align packet size with data registers access */
+	bpw = DIV_ROUND_UP(spi->cur_bpw, 8);
+	return DIV_ROUND_UP(packet, bpw);
+}
+
+/**
+ * stm32f4_spi_write_tx - Write bytes to Transmit Data Register
+ * @spi: pointer to the spi controller data structure
+ *
+ * Read from tx_buf depends on remaining bytes to avoid to read beyond
+ * tx_buf end.
+ */
+static void stm32f4_spi_write_tx(struct stm32_spi *spi)
+{
+	if ((spi->tx_len > 0) && (readl_relaxed(spi->base + STM32F4_SPI_SR) &
+				  STM32F4_SPI_SR_TXE)) {
+		u32 offs = spi->cur_xferlen - spi->tx_len;
+
+		if (spi->cur_bpw == 16) {
+			const u16 *tx_buf16 = (const u16 *)(spi->tx_buf + offs);
+
+			writew_relaxed(*tx_buf16, spi->base + STM32F4_SPI_DR);
+			spi->tx_len -= sizeof(u16);
+		} else {
+			const u8 *tx_buf8 = (const u8 *)(spi->tx_buf + offs);
+
+			writeb_relaxed(*tx_buf8, spi->base + STM32F4_SPI_DR);
+			spi->tx_len -= sizeof(u8);
+		}
+	}
+
+	dev_dbg(spi->dev, "%s: %d bytes left\n", __func__, spi->tx_len);
+}
+
+/**
+ * stm32h7_spi_write_txfifo - Write bytes in Transmit Data Register
+ * @spi: pointer to the spi controller data structure
+ *
+ * Read from tx_buf depends on remaining bytes to avoid to read beyond
+ * tx_buf end.
+ */
+static void stm32h7_spi_write_txfifo(struct stm32_spi *spi)
+{
+	while ((spi->tx_len > 0) &&
+		       (readl_relaxed(spi->base + STM32H7_SPI_SR) &
+			STM32H7_SPI_SR_TXP)) {
+		u32 offs = spi->cur_xferlen - spi->tx_len;
+
+		if (spi->tx_len >= sizeof(u32)) {
+			const u32 *tx_buf32 = (const u32 *)(spi->tx_buf + offs);
+
+			writel_relaxed(*tx_buf32, spi->base + STM32H7_SPI_TXDR);
+			spi->tx_len -= sizeof(u32);
+		} else if (spi->tx_len >= sizeof(u16)) {
+			const u16 *tx_buf16 = (const u16 *)(spi->tx_buf + offs);
+
+			writew_relaxed(*tx_buf16, spi->base + STM32H7_SPI_TXDR);
+			spi->tx_len -= sizeof(u16);
+		} else {
+			const u8 *tx_buf8 = (const u8 *)(spi->tx_buf + offs);
+
+			writeb_relaxed(*tx_buf8, spi->base + STM32H7_SPI_TXDR);
+			spi->tx_len -= sizeof(u8);
+		}
+	}
+
+	dev_dbg(spi->dev, "%s: %d bytes left\n", __func__, spi->tx_len);
+}
+
+/**
+ * stm32f4_spi_read_rx - Read bytes from Receive Data Register
+ * @spi: pointer to the spi controller data structure
+ *
+ * Write in rx_buf depends on remaining bytes to avoid to write beyond
+ * rx_buf end.
+ */
+static void stm32f4_spi_read_rx(struct stm32_spi *spi)
+{
+	if ((spi->rx_len > 0) && (readl_relaxed(spi->base + STM32F4_SPI_SR) &
+				  STM32F4_SPI_SR_RXNE)) {
+		u32 offs = spi->cur_xferlen - spi->rx_len;
+
+		if (spi->cur_bpw == 16) {
+			u16 *rx_buf16 = (u16 *)(spi->rx_buf + offs);
+
+			*rx_buf16 = readw_relaxed(spi->base + STM32F4_SPI_DR);
+			spi->rx_len -= sizeof(u16);
+		} else {
+			u8 *rx_buf8 = (u8 *)(spi->rx_buf + offs);
+
+			*rx_buf8 = readb_relaxed(spi->base + STM32F4_SPI_DR);
+			spi->rx_len -= sizeof(u8);
+		}
+	}
+
+	dev_dbg(spi->dev, "%s: %d bytes left\n", __func__, spi->rx_len);
+}
+
+/**
+ * stm32h7_spi_read_rxfifo - Read bytes in Receive Data Register
+ * @spi: pointer to the spi controller data structure
+ *
+ * Write in rx_buf depends on remaining bytes to avoid to write beyond
+ * rx_buf end.
+ */
+static void stm32h7_spi_read_rxfifo(struct stm32_spi *spi)
+{
+	u32 sr = readl_relaxed(spi->base + STM32H7_SPI_SR);
+	u32 rxplvl = FIELD_GET(STM32H7_SPI_SR_RXPLVL, sr);
+
+	while ((spi->rx_len > 0) &&
+	       ((sr & STM32H7_SPI_SR_RXP) ||
+		((sr & STM32H7_SPI_SR_EOT) &&
+		 ((sr & STM32H7_SPI_SR_RXWNE) || (rxplvl > 0))))) {
+		u32 offs = spi->cur_xferlen - spi->rx_len;
+
+		if ((spi->rx_len >= sizeof(u32)) ||
+		    (sr & STM32H7_SPI_SR_RXWNE)) {
+			u32 *rx_buf32 = (u32 *)(spi->rx_buf + offs);
+
+			*rx_buf32 = readl_relaxed(spi->base + STM32H7_SPI_RXDR);
+			spi->rx_len -= sizeof(u32);
+		} else if ((spi->rx_len >= sizeof(u16)) ||
+			   (!(sr & STM32H7_SPI_SR_RXWNE) &&
+			    (rxplvl >= 2 || spi->cur_bpw > 8))) {
+			u16 *rx_buf16 = (u16 *)(spi->rx_buf + offs);
+
+			*rx_buf16 = readw_relaxed(spi->base + STM32H7_SPI_RXDR);
+			spi->rx_len -= sizeof(u16);
+		} else {
+			u8 *rx_buf8 = (u8 *)(spi->rx_buf + offs);
+
+			*rx_buf8 = readb_relaxed(spi->base + STM32H7_SPI_RXDR);
+			spi->rx_len -= sizeof(u8);
+		}
+
+		sr = readl_relaxed(spi->base + STM32H7_SPI_SR);
+		rxplvl = FIELD_GET(STM32H7_SPI_SR_RXPLVL, sr);
+	}
+
+	dev_dbg(spi->dev, "%s: %d bytes left (sr=%08x)\n",
+		__func__, spi->rx_len, sr);
+}
+
+/**
+ * stm32_spi_enable - Enable SPI controller
+ * @spi: pointer to the spi controller data structure
+ */
+static void stm32_spi_enable(struct stm32_spi *spi)
+{
+	dev_dbg(spi->dev, "enable controller\n");
+
+	stm32_spi_set_bits(spi, spi->cfg->regs->en.reg,
+			   spi->cfg->regs->en.mask);
+}
+
+/**
+ * stm32f4_spi_disable - Disable SPI controller
+ * @spi: pointer to the spi controller data structure
+ */
+static void stm32f4_spi_disable(struct stm32_spi *spi)
+{
+	unsigned long flags;
+	u32 sr;
+
+	dev_dbg(spi->dev, "disable controller\n");
+
+	spin_lock_irqsave(&spi->lock, flags);
+
+	if (!(readl_relaxed(spi->base + STM32F4_SPI_CR1) &
+	      STM32F4_SPI_CR1_SPE)) {
+		spin_unlock_irqrestore(&spi->lock, flags);
+		return;
+	}
+
+	/* Disable interrupts */
+	stm32_spi_clr_bits(spi, STM32F4_SPI_CR2, STM32F4_SPI_CR2_TXEIE |
+						 STM32F4_SPI_CR2_RXNEIE |
+						 STM32F4_SPI_CR2_ERRIE);
+
+	/* Wait until BSY = 0 */
+	if (readl_relaxed_poll_timeout_atomic(spi->base + STM32F4_SPI_SR,
+					      sr, !(sr & STM32F4_SPI_SR_BSY),
+					      10, 100000) < 0) {
+		dev_warn(spi->dev, "disabling condition timeout\n");
+	}
+
+	if (spi->cur_usedma && spi->dma_tx)
+		dmaengine_terminate_all(spi->dma_tx);
+	if (spi->cur_usedma && spi->dma_rx)
+		dmaengine_terminate_all(spi->dma_rx);
+
+	stm32_spi_clr_bits(spi, STM32F4_SPI_CR1, STM32F4_SPI_CR1_SPE);
+
+	stm32_spi_clr_bits(spi, STM32F4_SPI_CR2, STM32F4_SPI_CR2_TXDMAEN |
+						 STM32F4_SPI_CR2_RXDMAEN);
+
+	/* Sequence to clear OVR flag */
+	readl_relaxed(spi->base + STM32F4_SPI_DR);
+	readl_relaxed(spi->base + STM32F4_SPI_SR);
+
+	spin_unlock_irqrestore(&spi->lock, flags);
+}
+
+/**
+ * stm32h7_spi_disable - Disable SPI controller
+ * @spi: pointer to the spi controller data structure
+ *
+ * RX-Fifo is flushed when SPI controller is disabled.
+ */
+static void stm32h7_spi_disable(struct stm32_spi *spi)
+{
+	unsigned long flags;
+	u32 cr1;
+
+	dev_dbg(spi->dev, "disable controller\n");
+
+	spin_lock_irqsave(&spi->lock, flags);
+
+	cr1 = readl_relaxed(spi->base + STM32H7_SPI_CR1);
+
+	if (!(cr1 & STM32H7_SPI_CR1_SPE)) {
+		spin_unlock_irqrestore(&spi->lock, flags);
+		return;
+	}
+
+	/* Add a delay to make sure that transmission is ended. */
+	if (spi->cur_half_period)
+		udelay(spi->cur_half_period);
+
+	if (spi->cur_usedma && spi->dma_tx)
+		dmaengine_terminate_all(spi->dma_tx);
+	if (spi->cur_usedma && spi->dma_rx)
+		dmaengine_terminate_all(spi->dma_rx);
+
+	stm32_spi_clr_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_SPE);
+
+	stm32_spi_clr_bits(spi, STM32H7_SPI_CFG1, STM32H7_SPI_CFG1_TXDMAEN |
+						STM32H7_SPI_CFG1_RXDMAEN);
+
+	/* Disable interrupts and clear status flags */
+	writel_relaxed(0, spi->base + STM32H7_SPI_IER);
+	writel_relaxed(STM32H7_SPI_IFCR_ALL, spi->base + STM32H7_SPI_IFCR);
+
+	spin_unlock_irqrestore(&spi->lock, flags);
+}
+
+/**
+ * stm32_spi_can_dma - Determine if the transfer is eligible for DMA use
+ * @master: controller master interface
+ * @spi_dev: pointer to the spi device
+ * @transfer: pointer to spi transfer
+ *
+ * If driver has fifo and the current transfer size is greater than fifo size,
+ * use DMA. Otherwise use DMA for transfer longer than defined DMA min bytes.
+ */
+static bool stm32_spi_can_dma(struct spi_master *master,
+			      struct spi_device *spi_dev,
+			      struct spi_transfer *transfer)
+{
+	unsigned int dma_size;
+	struct stm32_spi *spi = spi_master_get_devdata(master);
+
+	if (spi->cfg->has_fifo)
+		dma_size = spi->fifo_size;
+	else
+		dma_size = SPI_DMA_MIN_BYTES;
+
+	dev_dbg(spi->dev, "%s: %s\n", __func__,
+		(transfer->len > dma_size) ? "true" : "false");
+
+	return (transfer->len > dma_size);
+}
+
+/**
+ * stm32f4_spi_irq_event - Interrupt handler for SPI controller events
+ * @irq: interrupt line
+ * @dev_id: SPI controller master interface
+ */
+static irqreturn_t stm32f4_spi_irq_event(int irq, void *dev_id)
+{
+	struct spi_master *master = dev_id;
+	struct stm32_spi *spi = spi_master_get_devdata(master);
+	u32 sr, mask = 0;
+	bool end = false;
+
+	spin_lock(&spi->lock);
+
+	sr = readl_relaxed(spi->base + STM32F4_SPI_SR);
+	/*
+	 * BSY flag is not handled in interrupt but it is normal behavior when
+	 * this flag is set.
+	 */
+	sr &= ~STM32F4_SPI_SR_BSY;
+
+	if (!spi->cur_usedma && (spi->cur_comm == SPI_SIMPLEX_TX ||
+				 spi->cur_comm == SPI_3WIRE_TX)) {
+		/* OVR flag shouldn't be handled for TX only mode */
+		sr &= ~(STM32F4_SPI_SR_OVR | STM32F4_SPI_SR_RXNE);
+		mask |= STM32F4_SPI_SR_TXE;
+	}
+
+	if (!spi->cur_usedma && (spi->cur_comm == SPI_FULL_DUPLEX ||
+				spi->cur_comm == SPI_SIMPLEX_RX ||
+				spi->cur_comm == SPI_3WIRE_RX)) {
+		/* TXE flag is set and is handled when RXNE flag occurs */
+		sr &= ~STM32F4_SPI_SR_TXE;
+		mask |= STM32F4_SPI_SR_RXNE | STM32F4_SPI_SR_OVR;
+	}
+
+	if (!(sr & mask)) {
+		dev_dbg(spi->dev, "spurious IT (sr=0x%08x)\n", sr);
+		spin_unlock(&spi->lock);
+		return IRQ_NONE;
+	}
+
+	if (sr & STM32F4_SPI_SR_OVR) {
+		dev_warn(spi->dev, "Overrun: received value discarded\n");
+
+		/* Sequence to clear OVR flag */
+		readl_relaxed(spi->base + STM32F4_SPI_DR);
+		readl_relaxed(spi->base + STM32F4_SPI_SR);
+
+		/*
+		 * If overrun is detected, it means that something went wrong,
+		 * so stop the current transfer. Transfer can wait for next
+		 * RXNE but DR is already read and end never happens.
+		 */
+		end = true;
+		goto end_irq;
+	}
+
+	if (sr & STM32F4_SPI_SR_TXE) {
+		if (spi->tx_buf)
+			stm32f4_spi_write_tx(spi);
+		if (spi->tx_len == 0)
+			end = true;
+	}
+
+	if (sr & STM32F4_SPI_SR_RXNE) {
+		stm32f4_spi_read_rx(spi);
+		if (spi->rx_len == 0)
+			end = true;
+		else if (spi->tx_buf)/* Load data for discontinuous mode */
+			stm32f4_spi_write_tx(spi);
+	}
+
+end_irq:
+	if (end) {
+		/* Immediately disable interrupts to do not generate new one */
+		stm32_spi_clr_bits(spi, STM32F4_SPI_CR2,
+					STM32F4_SPI_CR2_TXEIE |
+					STM32F4_SPI_CR2_RXNEIE |
+					STM32F4_SPI_CR2_ERRIE);
+		spin_unlock(&spi->lock);
+		return IRQ_WAKE_THREAD;
+	}
+
+	spin_unlock(&spi->lock);
+	return IRQ_HANDLED;
+}
+
+/**
+ * stm32f4_spi_irq_thread - Thread of interrupt handler for SPI controller
+ * @irq: interrupt line
+ * @dev_id: SPI controller master interface
+ */
+static irqreturn_t stm32f4_spi_irq_thread(int irq, void *dev_id)
+{
+	struct spi_master *master = dev_id;
+	struct stm32_spi *spi = spi_master_get_devdata(master);
+
+	spi_finalize_current_transfer(master);
+	stm32f4_spi_disable(spi);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * stm32h7_spi_irq_thread - Thread of interrupt handler for SPI controller
+ * @irq: interrupt line
+ * @dev_id: SPI controller master interface
+ */
+static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id)
+{
+	struct spi_master *master = dev_id;
+	struct stm32_spi *spi = spi_master_get_devdata(master);
+	u32 sr, ier, mask;
+	unsigned long flags;
+	bool end = false;
+
+	spin_lock_irqsave(&spi->lock, flags);
+
+	sr = readl_relaxed(spi->base + STM32H7_SPI_SR);
+	ier = readl_relaxed(spi->base + STM32H7_SPI_IER);
+
+	mask = ier;
+	/*
+	 * EOTIE enables irq from EOT, SUSP and TXC events. We need to set
+	 * SUSP to acknowledge it later. TXC is automatically cleared
+	 */
+
+	mask |= STM32H7_SPI_SR_SUSP;
+	/*
+	 * DXPIE is set in Full-Duplex, one IT will be raised if TXP and RXP
+	 * are set. So in case of Full-Duplex, need to poll TXP and RXP event.
+	 */
+	if ((spi->cur_comm == SPI_FULL_DUPLEX) && !spi->cur_usedma)
+		mask |= STM32H7_SPI_SR_TXP | STM32H7_SPI_SR_RXP;
+
+	if (!(sr & mask)) {
+		dev_warn(spi->dev, "spurious IT (sr=0x%08x, ier=0x%08x)\n",
+			 sr, ier);
+		spin_unlock_irqrestore(&spi->lock, flags);
+		return IRQ_NONE;
+	}
+
+	if (sr & STM32H7_SPI_SR_SUSP) {
+		static DEFINE_RATELIMIT_STATE(rs,
+					      DEFAULT_RATELIMIT_INTERVAL * 10,
+					      1);
+		ratelimit_set_flags(&rs, RATELIMIT_MSG_ON_RELEASE);
+		if (__ratelimit(&rs))
+			dev_dbg_ratelimited(spi->dev, "Communication suspended\n");
+		if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0)))
+			stm32h7_spi_read_rxfifo(spi);
+		/*
+		 * If communication is suspended while using DMA, it means
+		 * that something went wrong, so stop the current transfer
+		 */
+		if (spi->cur_usedma)
+			end = true;
+	}
+
+	if (sr & STM32H7_SPI_SR_MODF) {
+		dev_warn(spi->dev, "Mode fault: transfer aborted\n");
+		end = true;
+	}
+
+	if (sr & STM32H7_SPI_SR_OVR) {
+		dev_err(spi->dev, "Overrun: RX data lost\n");
+		end = true;
+	}
+
+	if (sr & STM32H7_SPI_SR_EOT) {
+		if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0)))
+			stm32h7_spi_read_rxfifo(spi);
+		if (!spi->cur_usedma ||
+		    (spi->cur_comm == SPI_SIMPLEX_TX || spi->cur_comm == SPI_3WIRE_TX))
+			end = true;
+	}
+
+	if (sr & STM32H7_SPI_SR_TXP)
+		if (!spi->cur_usedma && (spi->tx_buf && (spi->tx_len > 0)))
+			stm32h7_spi_write_txfifo(spi);
+
+	if (sr & STM32H7_SPI_SR_RXP)
+		if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0)))
+			stm32h7_spi_read_rxfifo(spi);
+
+	writel_relaxed(sr & mask, spi->base + STM32H7_SPI_IFCR);
+
+	spin_unlock_irqrestore(&spi->lock, flags);
+
+	if (end) {
+		stm32h7_spi_disable(spi);
+		spi_finalize_current_transfer(master);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * stm32_spi_prepare_msg - set up the controller to transfer a single message
+ * @master: controller master interface
+ * @msg: pointer to spi message
+ */
+static int stm32_spi_prepare_msg(struct spi_master *master,
+				 struct spi_message *msg)
+{
+	struct stm32_spi *spi = spi_master_get_devdata(master);
+	struct spi_device *spi_dev = msg->spi;
+	struct device_node *np = spi_dev->dev.of_node;
+	unsigned long flags;
+	u32 clrb = 0, setb = 0;
+
+	/* SPI slave device may need time between data frames */
+	spi->cur_midi = 0;
+	if (np && !of_property_read_u32(np, "st,spi-midi-ns", &spi->cur_midi))
+		dev_dbg(spi->dev, "%dns inter-data idleness\n", spi->cur_midi);
+
+	if (spi_dev->mode & SPI_CPOL)
+		setb |= spi->cfg->regs->cpol.mask;
+	else
+		clrb |= spi->cfg->regs->cpol.mask;
+
+	if (spi_dev->mode & SPI_CPHA)
+		setb |= spi->cfg->regs->cpha.mask;
+	else
+		clrb |= spi->cfg->regs->cpha.mask;
+
+	if (spi_dev->mode & SPI_LSB_FIRST)
+		setb |= spi->cfg->regs->lsb_first.mask;
+	else
+		clrb |= spi->cfg->regs->lsb_first.mask;
+
+	dev_dbg(spi->dev, "cpol=%d cpha=%d lsb_first=%d cs_high=%d\n",
+		!!(spi_dev->mode & SPI_CPOL),
+		!!(spi_dev->mode & SPI_CPHA),
+		!!(spi_dev->mode & SPI_LSB_FIRST),
+		!!(spi_dev->mode & SPI_CS_HIGH));
+
+	/* On STM32H7, messages should not exceed a maximum size setted
+	 * afterward via the set_number_of_data function. In order to
+	 * ensure that, split large messages into several messages
+	 */
+	if (spi->cfg->set_number_of_data) {
+		int ret;
+
+		ret = spi_split_transfers_maxsize(master, msg,
+						  STM32H7_SPI_TSIZE_MAX,
+						  GFP_KERNEL | GFP_DMA);
+		if (ret)
+			return ret;
+	}
+
+	spin_lock_irqsave(&spi->lock, flags);
+
+	/* CPOL, CPHA and LSB FIRST bits have common register */
+	if (clrb || setb)
+		writel_relaxed(
+			(readl_relaxed(spi->base + spi->cfg->regs->cpol.reg) &
+			 ~clrb) | setb,
+			spi->base + spi->cfg->regs->cpol.reg);
+
+	spin_unlock_irqrestore(&spi->lock, flags);
+
+	return 0;
+}
+
+/**
+ * stm32f4_spi_dma_tx_cb - dma callback
+ * @data: pointer to the spi controller data structure
+ *
+ * DMA callback is called when the transfer is complete for DMA TX channel.
+ */
+static void stm32f4_spi_dma_tx_cb(void *data)
+{
+	struct stm32_spi *spi = data;
+
+	if (spi->cur_comm == SPI_SIMPLEX_TX || spi->cur_comm == SPI_3WIRE_TX) {
+		spi_finalize_current_transfer(spi->master);
+		stm32f4_spi_disable(spi);
+	}
+}
+
+/**
+ * stm32_spi_dma_rx_cb - dma callback
+ * @data: pointer to the spi controller data structure
+ *
+ * DMA callback is called when the transfer is complete for DMA RX channel.
+ */
+static void stm32_spi_dma_rx_cb(void *data)
+{
+	struct stm32_spi *spi = data;
+
+	spi_finalize_current_transfer(spi->master);
+	spi->cfg->disable(spi);
+}
+
+/**
+ * stm32_spi_dma_config - configure dma slave channel depending on current
+ *			  transfer bits_per_word.
+ * @spi: pointer to the spi controller data structure
+ * @dma_conf: pointer to the dma_slave_config structure
+ * @dir: direction of the dma transfer
+ */
+static void stm32_spi_dma_config(struct stm32_spi *spi,
+				 struct dma_slave_config *dma_conf,
+				 enum dma_transfer_direction dir)
+{
+	enum dma_slave_buswidth buswidth;
+	u32 maxburst;
+
+	if (spi->cur_bpw <= 8)
+		buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	else if (spi->cur_bpw <= 16)
+		buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
+	else
+		buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
+
+	if (spi->cfg->has_fifo) {
+		/* Valid for DMA Half or Full Fifo threshold */
+		if (spi->cur_fthlv == 2)
+			maxburst = 1;
+		else
+			maxburst = spi->cur_fthlv;
+	} else {
+		maxburst = 1;
+	}
+
+	memset(dma_conf, 0, sizeof(struct dma_slave_config));
+	dma_conf->direction = dir;
+	if (dma_conf->direction == DMA_DEV_TO_MEM) { /* RX */
+		dma_conf->src_addr = spi->phys_addr + spi->cfg->regs->rx.reg;
+		dma_conf->src_addr_width = buswidth;
+		dma_conf->src_maxburst = maxburst;
+
+		dev_dbg(spi->dev, "Rx DMA config buswidth=%d, maxburst=%d\n",
+			buswidth, maxburst);
+	} else if (dma_conf->direction == DMA_MEM_TO_DEV) { /* TX */
+		dma_conf->dst_addr = spi->phys_addr + spi->cfg->regs->tx.reg;
+		dma_conf->dst_addr_width = buswidth;
+		dma_conf->dst_maxburst = maxburst;
+
+		dev_dbg(spi->dev, "Tx DMA config buswidth=%d, maxburst=%d\n",
+			buswidth, maxburst);
+	}
+}
+
+/**
+ * stm32f4_spi_transfer_one_irq - transfer a single spi_transfer using
+ *				  interrupts
+ * @spi: pointer to the spi controller data structure
+ *
+ * It must returns 0 if the transfer is finished or 1 if the transfer is still
+ * in progress.
+ */
+static int stm32f4_spi_transfer_one_irq(struct stm32_spi *spi)
+{
+	unsigned long flags;
+	u32 cr2 = 0;
+
+	/* Enable the interrupts relative to the current communication mode */
+	if (spi->cur_comm == SPI_SIMPLEX_TX || spi->cur_comm == SPI_3WIRE_TX) {
+		cr2 |= STM32F4_SPI_CR2_TXEIE;
+	} else if (spi->cur_comm == SPI_FULL_DUPLEX ||
+				spi->cur_comm == SPI_SIMPLEX_RX ||
+				spi->cur_comm == SPI_3WIRE_RX) {
+		/* In transmit-only mode, the OVR flag is set in the SR register
+		 * since the received data are never read. Therefore set OVR
+		 * interrupt only when rx buffer is available.
+		 */
+		cr2 |= STM32F4_SPI_CR2_RXNEIE | STM32F4_SPI_CR2_ERRIE;
+	} else {
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&spi->lock, flags);
+
+	stm32_spi_set_bits(spi, STM32F4_SPI_CR2, cr2);
+
+	stm32_spi_enable(spi);
+
+	/* starting data transfer when buffer is loaded */
+	if (spi->tx_buf)
+		stm32f4_spi_write_tx(spi);
+
+	spin_unlock_irqrestore(&spi->lock, flags);
+
+	return 1;
+}
+
+/**
+ * stm32h7_spi_transfer_one_irq - transfer a single spi_transfer using
+ *				  interrupts
+ * @spi: pointer to the spi controller data structure
+ *
+ * It must returns 0 if the transfer is finished or 1 if the transfer is still
+ * in progress.
+ */
+static int stm32h7_spi_transfer_one_irq(struct stm32_spi *spi)
+{
+	unsigned long flags;
+	u32 ier = 0;
+
+	/* Enable the interrupts relative to the current communication mode */
+	if (spi->tx_buf && spi->rx_buf)	/* Full Duplex */
+		ier |= STM32H7_SPI_IER_DXPIE;
+	else if (spi->tx_buf)		/* Half-Duplex TX dir or Simplex TX */
+		ier |= STM32H7_SPI_IER_TXPIE;
+	else if (spi->rx_buf)		/* Half-Duplex RX dir or Simplex RX */
+		ier |= STM32H7_SPI_IER_RXPIE;
+
+	/* Enable the interrupts relative to the end of transfer */
+	ier |= STM32H7_SPI_IER_EOTIE | STM32H7_SPI_IER_TXTFIE |
+	       STM32H7_SPI_IER_OVRIE | STM32H7_SPI_IER_MODFIE;
+
+	spin_lock_irqsave(&spi->lock, flags);
+
+	stm32_spi_enable(spi);
+
+	/* Be sure to have data in fifo before starting data transfer */
+	if (spi->tx_buf)
+		stm32h7_spi_write_txfifo(spi);
+
+	stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_CSTART);
+
+	writel_relaxed(ier, spi->base + STM32H7_SPI_IER);
+
+	spin_unlock_irqrestore(&spi->lock, flags);
+
+	return 1;
+}
+
+/**
+ * stm32f4_spi_transfer_one_dma_start - Set SPI driver registers to start
+ *					transfer using DMA
+ * @spi: pointer to the spi controller data structure
+ */
+static void stm32f4_spi_transfer_one_dma_start(struct stm32_spi *spi)
+{
+	/* In DMA mode end of transfer is handled by DMA TX or RX callback. */
+	if (spi->cur_comm == SPI_SIMPLEX_RX || spi->cur_comm == SPI_3WIRE_RX ||
+	    spi->cur_comm == SPI_FULL_DUPLEX) {
+		/*
+		 * In transmit-only mode, the OVR flag is set in the SR register
+		 * since the received data are never read. Therefore set OVR
+		 * interrupt only when rx buffer is available.
+		 */
+		stm32_spi_set_bits(spi, STM32F4_SPI_CR2, STM32F4_SPI_CR2_ERRIE);
+	}
+
+	stm32_spi_enable(spi);
+}
+
+/**
+ * stm32h7_spi_transfer_one_dma_start - Set SPI driver registers to start
+ *					transfer using DMA
+ * @spi: pointer to the spi controller data structure
+ */
+static void stm32h7_spi_transfer_one_dma_start(struct stm32_spi *spi)
+{
+	uint32_t ier = STM32H7_SPI_IER_OVRIE | STM32H7_SPI_IER_MODFIE;
+
+	/* Enable the interrupts */
+	if (spi->cur_comm == SPI_SIMPLEX_TX || spi->cur_comm == SPI_3WIRE_TX)
+		ier |= STM32H7_SPI_IER_EOTIE | STM32H7_SPI_IER_TXTFIE;
+
+	stm32_spi_set_bits(spi, STM32H7_SPI_IER, ier);
+
+	stm32_spi_enable(spi);
+
+	stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_CSTART);
+}
+
+/**
+ * stm32_spi_transfer_one_dma - transfer a single spi_transfer using DMA
+ * @spi: pointer to the spi controller data structure
+ * @xfer: pointer to the spi_transfer structure
+ *
+ * It must returns 0 if the transfer is finished or 1 if the transfer is still
+ * in progress.
+ */
+static int stm32_spi_transfer_one_dma(struct stm32_spi *spi,
+				      struct spi_transfer *xfer)
+{
+	struct dma_slave_config tx_dma_conf, rx_dma_conf;
+	struct dma_async_tx_descriptor *tx_dma_desc, *rx_dma_desc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&spi->lock, flags);
+
+	rx_dma_desc = NULL;
+	if (spi->rx_buf && spi->dma_rx) {
+		stm32_spi_dma_config(spi, &rx_dma_conf, DMA_DEV_TO_MEM);
+		dmaengine_slave_config(spi->dma_rx, &rx_dma_conf);
+
+		/* Enable Rx DMA request */
+		stm32_spi_set_bits(spi, spi->cfg->regs->dma_rx_en.reg,
+				   spi->cfg->regs->dma_rx_en.mask);
+
+		rx_dma_desc = dmaengine_prep_slave_sg(
+					spi->dma_rx, xfer->rx_sg.sgl,
+					xfer->rx_sg.nents,
+					rx_dma_conf.direction,
+					DMA_PREP_INTERRUPT);
+	}
+
+	tx_dma_desc = NULL;
+	if (spi->tx_buf && spi->dma_tx) {
+		stm32_spi_dma_config(spi, &tx_dma_conf, DMA_MEM_TO_DEV);
+		dmaengine_slave_config(spi->dma_tx, &tx_dma_conf);
+
+		tx_dma_desc = dmaengine_prep_slave_sg(
+					spi->dma_tx, xfer->tx_sg.sgl,
+					xfer->tx_sg.nents,
+					tx_dma_conf.direction,
+					DMA_PREP_INTERRUPT);
+	}
+
+	if ((spi->tx_buf && spi->dma_tx && !tx_dma_desc) ||
+	    (spi->rx_buf && spi->dma_rx && !rx_dma_desc))
+		goto dma_desc_error;
+
+	if (spi->cur_comm == SPI_FULL_DUPLEX && (!tx_dma_desc || !rx_dma_desc))
+		goto dma_desc_error;
+
+	if (rx_dma_desc) {
+		rx_dma_desc->callback = spi->cfg->dma_rx_cb;
+		rx_dma_desc->callback_param = spi;
+
+		if (dma_submit_error(dmaengine_submit(rx_dma_desc))) {
+			dev_err(spi->dev, "Rx DMA submit failed\n");
+			goto dma_desc_error;
+		}
+		/* Enable Rx DMA channel */
+		dma_async_issue_pending(spi->dma_rx);
+	}
+
+	if (tx_dma_desc) {
+		if (spi->cur_comm == SPI_SIMPLEX_TX ||
+		    spi->cur_comm == SPI_3WIRE_TX) {
+			tx_dma_desc->callback = spi->cfg->dma_tx_cb;
+			tx_dma_desc->callback_param = spi;
+		}
+
+		if (dma_submit_error(dmaengine_submit(tx_dma_desc))) {
+			dev_err(spi->dev, "Tx DMA submit failed\n");
+			goto dma_submit_error;
+		}
+		/* Enable Tx DMA channel */
+		dma_async_issue_pending(spi->dma_tx);
+
+		/* Enable Tx DMA request */
+		stm32_spi_set_bits(spi, spi->cfg->regs->dma_tx_en.reg,
+				   spi->cfg->regs->dma_tx_en.mask);
+	}
+
+	spi->cfg->transfer_one_dma_start(spi);
+
+	spin_unlock_irqrestore(&spi->lock, flags);
+
+	return 1;
+
+dma_submit_error:
+	if (spi->dma_rx)
+		dmaengine_terminate_all(spi->dma_rx);
+
+dma_desc_error:
+	stm32_spi_clr_bits(spi, spi->cfg->regs->dma_rx_en.reg,
+			   spi->cfg->regs->dma_rx_en.mask);
+
+	spin_unlock_irqrestore(&spi->lock, flags);
+
+	dev_info(spi->dev, "DMA issue: fall back to irq transfer\n");
+
+	spi->cur_usedma = false;
+	return spi->cfg->transfer_one_irq(spi);
+}
+
+/**
+ * stm32f4_spi_set_bpw - Configure bits per word
+ * @spi: pointer to the spi controller data structure
+ */
+static void stm32f4_spi_set_bpw(struct stm32_spi *spi)
+{
+	if (spi->cur_bpw == 16)
+		stm32_spi_set_bits(spi, STM32F4_SPI_CR1, STM32F4_SPI_CR1_DFF);
+	else
+		stm32_spi_clr_bits(spi, STM32F4_SPI_CR1, STM32F4_SPI_CR1_DFF);
+}
+
+/**
+ * stm32h7_spi_set_bpw - configure bits per word
+ * @spi: pointer to the spi controller data structure
+ */
+static void stm32h7_spi_set_bpw(struct stm32_spi *spi)
+{
+	u32 bpw, fthlv;
+	u32 cfg1_clrb = 0, cfg1_setb = 0;
+
+	bpw = spi->cur_bpw - 1;
+
+	cfg1_clrb |= STM32H7_SPI_CFG1_DSIZE;
+	cfg1_setb |= FIELD_PREP(STM32H7_SPI_CFG1_DSIZE, bpw);
+
+	spi->cur_fthlv = stm32h7_spi_prepare_fthlv(spi, spi->cur_xferlen);
+	fthlv = spi->cur_fthlv - 1;
+
+	cfg1_clrb |= STM32H7_SPI_CFG1_FTHLV;
+	cfg1_setb |= FIELD_PREP(STM32H7_SPI_CFG1_FTHLV, fthlv);
+
+	writel_relaxed(
+		(readl_relaxed(spi->base + STM32H7_SPI_CFG1) &
+		 ~cfg1_clrb) | cfg1_setb,
+		spi->base + STM32H7_SPI_CFG1);
+}
+
+/**
+ * stm32_spi_set_mbr - Configure baud rate divisor in master mode
+ * @spi: pointer to the spi controller data structure
+ * @mbrdiv: baud rate divisor value
+ */
+static void stm32_spi_set_mbr(struct stm32_spi *spi, u32 mbrdiv)
+{
+	u32 clrb = 0, setb = 0;
+
+	clrb |= spi->cfg->regs->br.mask;
+	setb |= (mbrdiv << spi->cfg->regs->br.shift) & spi->cfg->regs->br.mask;
+
+	writel_relaxed((readl_relaxed(spi->base + spi->cfg->regs->br.reg) &
+			~clrb) | setb,
+		       spi->base + spi->cfg->regs->br.reg);
+}
+
+/**
+ * stm32_spi_communication_type - return transfer communication type
+ * @spi_dev: pointer to the spi device
+ * @transfer: pointer to spi transfer
+ */
+static unsigned int stm32_spi_communication_type(struct spi_device *spi_dev,
+						 struct spi_transfer *transfer)
+{
+	unsigned int type = SPI_FULL_DUPLEX;
+
+	if (spi_dev->mode & SPI_3WIRE) { /* MISO/MOSI signals shared */
+		/*
+		 * SPI_3WIRE and xfer->tx_buf != NULL and xfer->rx_buf != NULL
+		 * is forbidden and unvalidated by SPI subsystem so depending
+		 * on the valid buffer, we can determine the direction of the
+		 * transfer.
+		 */
+		if (!transfer->tx_buf)
+			type = SPI_3WIRE_RX;
+		else
+			type = SPI_3WIRE_TX;
+	} else {
+		if (!transfer->tx_buf)
+			type = SPI_SIMPLEX_RX;
+		else if (!transfer->rx_buf)
+			type = SPI_SIMPLEX_TX;
+	}
+
+	return type;
+}
+
+/**
+ * stm32f4_spi_set_mode - configure communication mode
+ * @spi: pointer to the spi controller data structure
+ * @comm_type: type of communication to configure
+ */
+static int stm32f4_spi_set_mode(struct stm32_spi *spi, unsigned int comm_type)
+{
+	if (comm_type == SPI_3WIRE_TX || comm_type == SPI_SIMPLEX_TX) {
+		stm32_spi_set_bits(spi, STM32F4_SPI_CR1,
+					STM32F4_SPI_CR1_BIDIMODE |
+					STM32F4_SPI_CR1_BIDIOE);
+	} else if (comm_type == SPI_FULL_DUPLEX ||
+				comm_type == SPI_SIMPLEX_RX) {
+		stm32_spi_clr_bits(spi, STM32F4_SPI_CR1,
+					STM32F4_SPI_CR1_BIDIMODE |
+					STM32F4_SPI_CR1_BIDIOE);
+	} else if (comm_type == SPI_3WIRE_RX) {
+		stm32_spi_set_bits(spi, STM32F4_SPI_CR1,
+					STM32F4_SPI_CR1_BIDIMODE);
+		stm32_spi_clr_bits(spi, STM32F4_SPI_CR1,
+					STM32F4_SPI_CR1_BIDIOE);
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * stm32h7_spi_set_mode - configure communication mode
+ * @spi: pointer to the spi controller data structure
+ * @comm_type: type of communication to configure
+ */
+static int stm32h7_spi_set_mode(struct stm32_spi *spi, unsigned int comm_type)
+{
+	u32 mode;
+	u32 cfg2_clrb = 0, cfg2_setb = 0;
+
+	if (comm_type == SPI_3WIRE_RX) {
+		mode = STM32H7_SPI_HALF_DUPLEX;
+		stm32_spi_clr_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_HDDIR);
+	} else if (comm_type == SPI_3WIRE_TX) {
+		mode = STM32H7_SPI_HALF_DUPLEX;
+		stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_HDDIR);
+	} else if (comm_type == SPI_SIMPLEX_RX) {
+		mode = STM32H7_SPI_SIMPLEX_RX;
+	} else if (comm_type == SPI_SIMPLEX_TX) {
+		mode = STM32H7_SPI_SIMPLEX_TX;
+	} else {
+		mode = STM32H7_SPI_FULL_DUPLEX;
+	}
+
+	cfg2_clrb |= STM32H7_SPI_CFG2_COMM;
+	cfg2_setb |= FIELD_PREP(STM32H7_SPI_CFG2_COMM, mode);
+
+	writel_relaxed(
+		(readl_relaxed(spi->base + STM32H7_SPI_CFG2) &
+		 ~cfg2_clrb) | cfg2_setb,
+		spi->base + STM32H7_SPI_CFG2);
+
+	return 0;
+}
+
+/**
+ * stm32h7_spi_data_idleness - configure minimum time delay inserted between two
+ *			       consecutive data frames in master mode
+ * @spi: pointer to the spi controller data structure
+ * @len: transfer len
+ */
+static void stm32h7_spi_data_idleness(struct stm32_spi *spi, u32 len)
+{
+	u32 cfg2_clrb = 0, cfg2_setb = 0;
+
+	cfg2_clrb |= STM32H7_SPI_CFG2_MIDI;
+	if ((len > 1) && (spi->cur_midi > 0)) {
+		u32 sck_period_ns = DIV_ROUND_UP(NSEC_PER_SEC, spi->cur_speed);
+		u32 midi = min_t(u32,
+				 DIV_ROUND_UP(spi->cur_midi, sck_period_ns),
+				 FIELD_GET(STM32H7_SPI_CFG2_MIDI,
+				 STM32H7_SPI_CFG2_MIDI));
+
+
+		dev_dbg(spi->dev, "period=%dns, midi=%d(=%dns)\n",
+			sck_period_ns, midi, midi * sck_period_ns);
+		cfg2_setb |= FIELD_PREP(STM32H7_SPI_CFG2_MIDI, midi);
+	}
+
+	writel_relaxed((readl_relaxed(spi->base + STM32H7_SPI_CFG2) &
+			~cfg2_clrb) | cfg2_setb,
+		       spi->base + STM32H7_SPI_CFG2);
+}
+
+/**
+ * stm32h7_spi_number_of_data - configure number of data at current transfer
+ * @spi: pointer to the spi controller data structure
+ * @nb_words: transfer length (in words)
+ */
+static int stm32h7_spi_number_of_data(struct stm32_spi *spi, u32 nb_words)
+{
+	if (nb_words <= STM32H7_SPI_TSIZE_MAX) {
+		writel_relaxed(FIELD_PREP(STM32H7_SPI_CR2_TSIZE, nb_words),
+			       spi->base + STM32H7_SPI_CR2);
+	} else {
+		return -EMSGSIZE;
+	}
+
+	return 0;
+}
+
+/**
+ * stm32_spi_transfer_one_setup - common setup to transfer a single
+ *				  spi_transfer either using DMA or
+ *				  interrupts.
+ * @spi: pointer to the spi controller data structure
+ * @spi_dev: pointer to the spi device
+ * @transfer: pointer to spi transfer
+ */
+static int stm32_spi_transfer_one_setup(struct stm32_spi *spi,
+					struct spi_device *spi_dev,
+					struct spi_transfer *transfer)
+{
+	unsigned long flags;
+	unsigned int comm_type;
+	int nb_words, ret = 0;
+	int mbr;
+
+	spin_lock_irqsave(&spi->lock, flags);
+
+	spi->cur_xferlen = transfer->len;
+
+	spi->cur_bpw = transfer->bits_per_word;
+	spi->cfg->set_bpw(spi);
+
+	/* Update spi->cur_speed with real clock speed */
+	mbr = stm32_spi_prepare_mbr(spi, transfer->speed_hz,
+				    spi->cfg->baud_rate_div_min,
+				    spi->cfg->baud_rate_div_max);
+	if (mbr < 0) {
+		ret = mbr;
+		goto out;
+	}
+
+	transfer->speed_hz = spi->cur_speed;
+	stm32_spi_set_mbr(spi, mbr);
+
+	comm_type = stm32_spi_communication_type(spi_dev, transfer);
+	ret = spi->cfg->set_mode(spi, comm_type);
+	if (ret < 0)
+		goto out;
+
+	spi->cur_comm = comm_type;
+
+	if (spi->cfg->set_data_idleness)
+		spi->cfg->set_data_idleness(spi, transfer->len);
+
+	if (spi->cur_bpw <= 8)
+		nb_words = transfer->len;
+	else if (spi->cur_bpw <= 16)
+		nb_words = DIV_ROUND_UP(transfer->len * 8, 16);
+	else
+		nb_words = DIV_ROUND_UP(transfer->len * 8, 32);
+
+	if (spi->cfg->set_number_of_data) {
+		ret = spi->cfg->set_number_of_data(spi, nb_words);
+		if (ret < 0)
+			goto out;
+	}
+
+	dev_dbg(spi->dev, "transfer communication mode set to %d\n",
+		spi->cur_comm);
+	dev_dbg(spi->dev,
+		"data frame of %d-bit, data packet of %d data frames\n",
+		spi->cur_bpw, spi->cur_fthlv);
+	dev_dbg(spi->dev, "speed set to %dHz\n", spi->cur_speed);
+	dev_dbg(spi->dev, "transfer of %d bytes (%d data frames)\n",
+		spi->cur_xferlen, nb_words);
+	dev_dbg(spi->dev, "dma %s\n",
+		(spi->cur_usedma) ? "enabled" : "disabled");
+
+out:
+	spin_unlock_irqrestore(&spi->lock, flags);
+
+	return ret;
+}
+
+/**
+ * stm32_spi_transfer_one - transfer a single spi_transfer
+ * @master: controller master interface
+ * @spi_dev: pointer to the spi device
+ * @transfer: pointer to spi transfer
+ *
+ * It must return 0 if the transfer is finished or 1 if the transfer is still
+ * in progress.
+ */
+static int stm32_spi_transfer_one(struct spi_master *master,
+				  struct spi_device *spi_dev,
+				  struct spi_transfer *transfer)
+{
+	struct stm32_spi *spi = spi_master_get_devdata(master);
+	int ret;
+
+	spi->tx_buf = transfer->tx_buf;
+	spi->rx_buf = transfer->rx_buf;
+	spi->tx_len = spi->tx_buf ? transfer->len : 0;
+	spi->rx_len = spi->rx_buf ? transfer->len : 0;
+
+	spi->cur_usedma = (master->can_dma &&
+			   master->can_dma(master, spi_dev, transfer));
+
+	ret = stm32_spi_transfer_one_setup(spi, spi_dev, transfer);
+	if (ret) {
+		dev_err(spi->dev, "SPI transfer setup failed\n");
+		return ret;
+	}
+
+	if (spi->cur_usedma)
+		return stm32_spi_transfer_one_dma(spi, transfer);
+	else
+		return spi->cfg->transfer_one_irq(spi);
+}
+
+/**
+ * stm32_spi_unprepare_msg - relax the hardware
+ * @master: controller master interface
+ * @msg: pointer to the spi message
+ */
+static int stm32_spi_unprepare_msg(struct spi_master *master,
+				   struct spi_message *msg)
+{
+	struct stm32_spi *spi = spi_master_get_devdata(master);
+
+	spi->cfg->disable(spi);
+
+	return 0;
+}
+
+/**
+ * stm32f4_spi_config - Configure SPI controller as SPI master
+ * @spi: pointer to the spi controller data structure
+ */
+static int stm32f4_spi_config(struct stm32_spi *spi)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&spi->lock, flags);
+
+	/* Ensure I2SMOD bit is kept cleared */
+	stm32_spi_clr_bits(spi, STM32F4_SPI_I2SCFGR,
+			   STM32F4_SPI_I2SCFGR_I2SMOD);
+
+	/*
+	 * - SS input value high
+	 * - transmitter half duplex direction
+	 * - Set the master mode (default Motorola mode)
+	 * - Consider 1 master/n slaves configuration and
+	 *   SS input value is determined by the SSI bit
+	 */
+	stm32_spi_set_bits(spi, STM32F4_SPI_CR1, STM32F4_SPI_CR1_SSI |
+						 STM32F4_SPI_CR1_BIDIOE |
+						 STM32F4_SPI_CR1_MSTR |
+						 STM32F4_SPI_CR1_SSM);
+
+	spin_unlock_irqrestore(&spi->lock, flags);
+
+	return 0;
+}
+
+/**
+ * stm32h7_spi_config - Configure SPI controller as SPI master
+ * @spi: pointer to the spi controller data structure
+ */
+static int stm32h7_spi_config(struct stm32_spi *spi)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&spi->lock, flags);
+
+	/* Ensure I2SMOD bit is kept cleared */
+	stm32_spi_clr_bits(spi, STM32H7_SPI_I2SCFGR,
+			   STM32H7_SPI_I2SCFGR_I2SMOD);
+
+	/*
+	 * - SS input value high
+	 * - transmitter half duplex direction
+	 * - automatic communication suspend when RX-Fifo is full
+	 */
+	stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_SSI |
+						 STM32H7_SPI_CR1_HDDIR |
+						 STM32H7_SPI_CR1_MASRX);
+
+	/*
+	 * - Set the master mode (default Motorola mode)
+	 * - Consider 1 master/n slaves configuration and
+	 *   SS input value is determined by the SSI bit
+	 * - keep control of all associated GPIOs
+	 */
+	stm32_spi_set_bits(spi, STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_MASTER |
+						  STM32H7_SPI_CFG2_SSM |
+						  STM32H7_SPI_CFG2_AFCNTR);
+
+	spin_unlock_irqrestore(&spi->lock, flags);
+
+	return 0;
+}
+
+static const struct stm32_spi_cfg stm32f4_spi_cfg = {
+	.regs = &stm32f4_spi_regspec,
+	.get_bpw_mask = stm32f4_spi_get_bpw_mask,
+	.disable = stm32f4_spi_disable,
+	.config = stm32f4_spi_config,
+	.set_bpw = stm32f4_spi_set_bpw,
+	.set_mode = stm32f4_spi_set_mode,
+	.transfer_one_dma_start = stm32f4_spi_transfer_one_dma_start,
+	.dma_tx_cb = stm32f4_spi_dma_tx_cb,
+	.dma_rx_cb = stm32_spi_dma_rx_cb,
+	.transfer_one_irq = stm32f4_spi_transfer_one_irq,
+	.irq_handler_event = stm32f4_spi_irq_event,
+	.irq_handler_thread = stm32f4_spi_irq_thread,
+	.baud_rate_div_min = STM32F4_SPI_BR_DIV_MIN,
+	.baud_rate_div_max = STM32F4_SPI_BR_DIV_MAX,
+	.has_fifo = false,
+	.flags = SPI_MASTER_MUST_TX,
+};
+
+static const struct stm32_spi_cfg stm32h7_spi_cfg = {
+	.regs = &stm32h7_spi_regspec,
+	.get_fifo_size = stm32h7_spi_get_fifo_size,
+	.get_bpw_mask = stm32h7_spi_get_bpw_mask,
+	.disable = stm32h7_spi_disable,
+	.config = stm32h7_spi_config,
+	.set_bpw = stm32h7_spi_set_bpw,
+	.set_mode = stm32h7_spi_set_mode,
+	.set_data_idleness = stm32h7_spi_data_idleness,
+	.set_number_of_data = stm32h7_spi_number_of_data,
+	.transfer_one_dma_start = stm32h7_spi_transfer_one_dma_start,
+	.dma_rx_cb = stm32_spi_dma_rx_cb,
+	/*
+	 * dma_tx_cb is not necessary since in case of TX, dma is followed by
+	 * SPI access hence handling is performed within the SPI interrupt
+	 */
+	.transfer_one_irq = stm32h7_spi_transfer_one_irq,
+	.irq_handler_thread = stm32h7_spi_irq_thread,
+	.baud_rate_div_min = STM32H7_SPI_MBR_DIV_MIN,
+	.baud_rate_div_max = STM32H7_SPI_MBR_DIV_MAX,
+	.has_fifo = true,
+};
+
+static const struct of_device_id stm32_spi_of_match[] = {
+	{ .compatible = "st,stm32h7-spi", .data = (void *)&stm32h7_spi_cfg },
+	{ .compatible = "st,stm32f4-spi", .data = (void *)&stm32f4_spi_cfg },
+	{},
+};
+MODULE_DEVICE_TABLE(of, stm32_spi_of_match);
+
+static int stm32_spi_probe(struct platform_device *pdev)
+{
+	struct spi_master *master;
+	struct stm32_spi *spi;
+	struct resource *res;
+	struct reset_control *rst;
+	int ret;
+
+	master = devm_spi_alloc_master(&pdev->dev, sizeof(struct stm32_spi));
+	if (!master) {
+		dev_err(&pdev->dev, "spi master allocation failed\n");
+		return -ENOMEM;
+	}
+	platform_set_drvdata(pdev, master);
+
+	spi = spi_master_get_devdata(master);
+	spi->dev = &pdev->dev;
+	spi->master = master;
+	spin_lock_init(&spi->lock);
+
+	spi->cfg = (const struct stm32_spi_cfg *)
+		of_match_device(pdev->dev.driver->of_match_table,
+				&pdev->dev)->data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	spi->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(spi->base))
+		return PTR_ERR(spi->base);
+
+	spi->phys_addr = (dma_addr_t)res->start;
+
+	spi->irq = platform_get_irq(pdev, 0);
+	if (spi->irq <= 0)
+		return dev_err_probe(&pdev->dev, spi->irq,
+				     "failed to get irq\n");
+
+	ret = devm_request_threaded_irq(&pdev->dev, spi->irq,
+					spi->cfg->irq_handler_event,
+					spi->cfg->irq_handler_thread,
+					IRQF_ONESHOT, pdev->name, master);
+	if (ret) {
+		dev_err(&pdev->dev, "irq%d request failed: %d\n", spi->irq,
+			ret);
+		return ret;
+	}
+
+	spi->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(spi->clk)) {
+		ret = PTR_ERR(spi->clk);
+		dev_err(&pdev->dev, "clk get failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(spi->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "clk enable failed: %d\n", ret);
+		return ret;
+	}
+	spi->clk_rate = clk_get_rate(spi->clk);
+	if (!spi->clk_rate) {
+		dev_err(&pdev->dev, "clk rate = 0\n");
+		ret = -EINVAL;
+		goto err_clk_disable;
+	}
+
+	rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
+	if (rst) {
+		if (IS_ERR(rst)) {
+			ret = dev_err_probe(&pdev->dev, PTR_ERR(rst),
+					    "failed to get reset\n");
+			goto err_clk_disable;
+		}
+
+		reset_control_assert(rst);
+		udelay(2);
+		reset_control_deassert(rst);
+	}
+
+	if (spi->cfg->has_fifo)
+		spi->fifo_size = spi->cfg->get_fifo_size(spi);
+
+	ret = spi->cfg->config(spi);
+	if (ret) {
+		dev_err(&pdev->dev, "controller configuration failed: %d\n",
+			ret);
+		goto err_clk_disable;
+	}
+
+	master->dev.of_node = pdev->dev.of_node;
+	master->auto_runtime_pm = true;
+	master->bus_num = pdev->id;
+	master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST |
+			    SPI_3WIRE;
+	master->bits_per_word_mask = spi->cfg->get_bpw_mask(spi);
+	master->max_speed_hz = spi->clk_rate / spi->cfg->baud_rate_div_min;
+	master->min_speed_hz = spi->clk_rate / spi->cfg->baud_rate_div_max;
+	master->use_gpio_descriptors = true;
+	master->prepare_message = stm32_spi_prepare_msg;
+	master->transfer_one = stm32_spi_transfer_one;
+	master->unprepare_message = stm32_spi_unprepare_msg;
+	master->flags = spi->cfg->flags;
+
+	spi->dma_tx = dma_request_chan(spi->dev, "tx");
+	if (IS_ERR(spi->dma_tx)) {
+		ret = PTR_ERR(spi->dma_tx);
+		spi->dma_tx = NULL;
+		if (ret == -EPROBE_DEFER)
+			goto err_clk_disable;
+
+		dev_warn(&pdev->dev, "failed to request tx dma channel\n");
+	} else {
+		master->dma_tx = spi->dma_tx;
+	}
+
+	spi->dma_rx = dma_request_chan(spi->dev, "rx");
+	if (IS_ERR(spi->dma_rx)) {
+		ret = PTR_ERR(spi->dma_rx);
+		spi->dma_rx = NULL;
+		if (ret == -EPROBE_DEFER)
+			goto err_dma_release;
+
+		dev_warn(&pdev->dev, "failed to request rx dma channel\n");
+	} else {
+		master->dma_rx = spi->dma_rx;
+	}
+
+	if (spi->dma_tx || spi->dma_rx)
+		master->can_dma = stm32_spi_can_dma;
+
+	pm_runtime_set_autosuspend_delay(&pdev->dev,
+					 STM32_SPI_AUTOSUSPEND_DELAY);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_get_noresume(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	ret = spi_register_master(master);
+	if (ret) {
+		dev_err(&pdev->dev, "spi master registration failed: %d\n",
+			ret);
+		goto err_pm_disable;
+	}
+
+	pm_runtime_mark_last_busy(&pdev->dev);
+	pm_runtime_put_autosuspend(&pdev->dev);
+
+	dev_info(&pdev->dev, "driver initialized\n");
+
+	return 0;
+
+err_pm_disable:
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+err_dma_release:
+	if (spi->dma_tx)
+		dma_release_channel(spi->dma_tx);
+	if (spi->dma_rx)
+		dma_release_channel(spi->dma_rx);
+err_clk_disable:
+	clk_disable_unprepare(spi->clk);
+
+	return ret;
+}
+
+static int stm32_spi_remove(struct platform_device *pdev)
+{
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct stm32_spi *spi = spi_master_get_devdata(master);
+
+	pm_runtime_get_sync(&pdev->dev);
+
+	spi_unregister_master(master);
+	spi->cfg->disable(spi);
+
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+
+	if (master->dma_tx)
+		dma_release_channel(master->dma_tx);
+	if (master->dma_rx)
+		dma_release_channel(master->dma_rx);
+
+	clk_disable_unprepare(spi->clk);
+
+
+	pinctrl_pm_select_sleep_state(&pdev->dev);
+
+	return 0;
+}
+
+static int __maybe_unused stm32_spi_runtime_suspend(struct device *dev)
+{
+	struct spi_master *master = dev_get_drvdata(dev);
+	struct stm32_spi *spi = spi_master_get_devdata(master);
+
+	clk_disable_unprepare(spi->clk);
+
+	return pinctrl_pm_select_sleep_state(dev);
+}
+
+static int __maybe_unused stm32_spi_runtime_resume(struct device *dev)
+{
+	struct spi_master *master = dev_get_drvdata(dev);
+	struct stm32_spi *spi = spi_master_get_devdata(master);
+	int ret;
+
+	ret = pinctrl_pm_select_default_state(dev);
+	if (ret)
+		return ret;
+
+	return clk_prepare_enable(spi->clk);
+}
+
+static int __maybe_unused stm32_spi_suspend(struct device *dev)
+{
+	struct spi_master *master = dev_get_drvdata(dev);
+	int ret;
+
+	ret = spi_master_suspend(master);
+	if (ret)
+		return ret;
+
+	return pm_runtime_force_suspend(dev);
+}
+
+static int __maybe_unused stm32_spi_resume(struct device *dev)
+{
+	struct spi_master *master = dev_get_drvdata(dev);
+	struct stm32_spi *spi = spi_master_get_devdata(master);
+	int ret;
+
+	ret = pm_runtime_force_resume(dev);
+	if (ret)
+		return ret;
+
+	ret = spi_master_resume(master);
+	if (ret) {
+		clk_disable_unprepare(spi->clk);
+		return ret;
+	}
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0) {
+		dev_err(dev, "Unable to power device:%d\n", ret);
+		return ret;
+	}
+
+	spi->cfg->config(spi);
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops stm32_spi_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(stm32_spi_suspend, stm32_spi_resume)
+	SET_RUNTIME_PM_OPS(stm32_spi_runtime_suspend,
+			   stm32_spi_runtime_resume, NULL)
+};
+
+static struct platform_driver stm32_spi_driver = {
+	.probe = stm32_spi_probe,
+	.remove = stm32_spi_remove,
+	.driver = {
+		.name = DRIVER_NAME,
+		.pm = &stm32_spi_pm_ops,
+		.of_match_table = stm32_spi_of_match,
+	},
+};
+
+module_platform_driver(stm32_spi_driver);
+
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_DESCRIPTION("STMicroelectronics STM32 SPI Controller driver");
+MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>");
+MODULE_LICENSE("GPL v2");