Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 385 insertions, 0 deletions

diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
new file mode 100644
index 000000000..cc30ff93e
--- /dev/null
+++ b/drivers/tty/Kconfig
@@ -0,0 +1,385 @@
+# SPDX-License-Identifier: GPL-2.0
+config TTY
+	bool "Enable TTY" if EXPERT
+	default y
+	help
+	  Allows you to remove TTY support which can save space, and
+	  blocks features that require TTY from inclusion in the kernel.
+	  TTY is required for any text terminals or serial port
+	  communication. Most users should leave this enabled.
+
+if TTY
+
+config VT
+	bool "Virtual terminal" if EXPERT
+	select INPUT
+	default y if !UML
+	help
+	  If you say Y here, you will get support for terminal devices with
+	  display and keyboard devices. These are called "virtual" because you
+	  can run several virtual terminals (also called virtual consoles) on
+	  one physical terminal. This is rather useful, for example one
+	  virtual terminal can collect system messages and warnings, another
+	  one can be used for a text-mode user session, and a third could run
+	  an X session, all in parallel. Switching between virtual terminals
+	  is done with certain key combinations, usually Alt-<function key>.
+
+	  The setterm command ("man setterm") can be used to change the
+	  properties (such as colors or beeping) of a virtual terminal. The
+	  man page console_codes(4) ("man console_codes") contains the special
+	  character sequences that can be used to change those properties
+	  directly. The fonts used on virtual terminals can be changed with
+	  the setfont ("man setfont") command and the key bindings are defined
+	  with the loadkeys ("man loadkeys") command.
+
+	  You need at least one virtual terminal device in order to make use
+	  of your keyboard and monitor. Therefore, only people configuring an
+	  embedded system would want to say N here in order to save some
+	  memory; the only way to log into such a system is then via a serial
+	  or network connection.
+
+	  If unsure, say Y, or else you won't be able to do much with your new
+	  shiny Linux system :-)
+
+config CONSOLE_TRANSLATIONS
+	depends on VT
+	default y
+	bool "Enable character translations in console" if EXPERT
+	help
+	  This enables support for font mapping and Unicode translation
+	  on virtual consoles.
+
+config VT_CONSOLE
+	bool "Support for console on virtual terminal" if EXPERT
+	depends on VT
+	default y
+	help
+	  The system console is the device which receives all kernel messages
+	  and warnings and which allows logins in single user mode. If you
+	  answer Y here, a virtual terminal (the device used to interact with
+	  a physical terminal) can be used as system console. This is the most
+	  common mode of operations, so you should say Y here unless you want
+	  the kernel messages be output only to a serial port (in which case
+	  you should say Y to "Console on serial port", below).
+
+	  If you do say Y here, by default the currently visible virtual
+	  terminal (/dev/tty0) will be used as system console. You can change
+	  that with a kernel command line option such as "console=tty3" which
+	  would use the third virtual terminal as system console. (Try "man
+	  bootparam" or see the documentation of your boot loader (lilo or
+	  loadlin) about how to pass options to the kernel at boot time.)
+
+	  If unsure, say Y.
+
+config VT_CONSOLE_SLEEP
+	def_bool y
+	depends on VT_CONSOLE && PM_SLEEP
+
+config HW_CONSOLE
+	bool
+	depends on VT
+	default y
+
+config VT_HW_CONSOLE_BINDING
+	bool "Support for binding and unbinding console drivers"
+	depends on HW_CONSOLE
+	help
+	  The virtual terminal is the device that interacts with the physical
+	  terminal through console drivers. On these systems, at least one
+	  console driver is loaded. In other configurations, additional console
+	  drivers may be enabled, such as the framebuffer console. If more than
+	  1 console driver is enabled, setting this to 'y' will allow you to
+	  select the console driver that will serve as the backend for the
+	  virtual terminals.
+
+	  See <file:Documentation/driver-api/console.rst> for more
+	  information. For framebuffer console users, please refer to
+	  <file:Documentation/fb/fbcon.rst>.
+
+config UNIX98_PTYS
+	bool "Unix98 PTY support" if EXPERT
+	default y
+	help
+	  A pseudo terminal (PTY) is a software device consisting of two
+	  halves: a master and a slave. The slave device behaves identical to
+	  a physical terminal; the master device is used by a process to
+	  read data from and write data to the slave, thereby emulating a
+	  terminal. Typical programs for the master side are telnet servers
+	  and xterms.
+
+	  Linux has traditionally used the BSD-like names /dev/ptyxx for
+	  masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
+	  has a number of problems. The GNU C library glibc 2.1 and later,
+	  however, supports the Unix98 naming standard: in order to acquire a
+	  pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
+	  terminal is then made available to the process and the pseudo
+	  terminal slave can be accessed as /dev/pts/<number>. What was
+	  traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
+
+	  All modern Linux systems use the Unix98 ptys.  Say Y unless
+	  you're on an embedded system and want to conserve memory.
+
+config LEGACY_PTYS
+	bool "Legacy (BSD) PTY support"
+	default y
+	help
+	  A pseudo terminal (PTY) is a software device consisting of two
+	  halves: a master and a slave. The slave device behaves identical to
+	  a physical terminal; the master device is used by a process to
+	  read data from and write data to the slave, thereby emulating a
+	  terminal. Typical programs for the master side are telnet servers
+	  and xterms.
+
+	  Linux has traditionally used the BSD-like names /dev/ptyxx
+	  for masters and /dev/ttyxx for slaves of pseudo
+	  terminals. This scheme has a number of problems, including
+	  security.  This option enables these legacy devices; on most
+	  systems, it is safe to say N.
+
+config LEGACY_PTY_COUNT
+	int "Maximum number of legacy PTY in use"
+	depends on LEGACY_PTYS
+	range 0 256
+	default "256"
+	help
+	  The maximum number of legacy PTYs that can be used at any one time.
+	  The default is 256, and should be more than enough.  Embedded
+	  systems may want to reduce this to save memory.
+
+	  When not in use, each legacy PTY occupies 12 bytes on 32-bit
+	  architectures and 24 bytes on 64-bit architectures.
+
+config LDISC_AUTOLOAD
+	bool "Automatically load TTY Line Disciplines"
+	default y
+	help
+	  Historically the kernel has always automatically loaded any
+	  line discipline that is in a kernel module when a user asks
+	  for it to be loaded with the TIOCSETD ioctl, or through other
+	  means.  This is not always the best thing to do on systems
+	  where you know you will not be using some of the more
+	  "ancient" line disciplines, so prevent the kernel from doing
+	  this unless the request is coming from a process with the
+	  CAP_SYS_MODULE permissions.
+
+	  Say 'Y' here if you trust your userspace users to do the right
+	  thing, or if you have only provided the line disciplines that
+	  you know you will be using, or if you wish to continue to use
+	  the traditional method of on-demand loading of these modules
+	  by any user.
+
+	  This functionality can be changed at runtime with the
+	  dev.tty.ldisc_autoload sysctl, this configuration option will
+	  only set the default value of this functionality.
+
+source "drivers/tty/serial/Kconfig"
+
+config SERIAL_NONSTANDARD
+	bool "Non-standard serial port support"
+	depends on HAS_IOMEM
+	help
+	  Say Y here if you have any non-standard serial boards -- boards
+	  which aren't supported using the standard "dumb" serial driver.
+	  This includes intelligent serial boards such as
+	  Digiboards, etc. These are usually used for systems that need many
+	  serial ports because they serve many terminals or dial-in
+	  connections.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about non-standard serial boards.
+
+	  Most people can say N here.
+
+config MOXA_INTELLIO
+	tristate "Moxa Intellio support"
+	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+	select FW_LOADER
+	help
+	  Say Y here if you have a Moxa Intellio multiport serial card.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called moxa.
+
+config MOXA_SMARTIO
+	tristate "Moxa SmartIO support v. 2.0"
+	depends on SERIAL_NONSTANDARD && PCI
+	help
+	  Say Y here if you have a Moxa SmartIO multiport serial card and/or
+	  want to help develop a new version of this driver.
+
+	  This is upgraded (1.9.1) driver from original Moxa drivers with
+	  changes finally resulting in PCI probing.
+
+	  This driver can also be built as a module. The module will be called
+	  mxser. If you want to do that, say M here.
+
+config SYNCLINK_GT
+	tristate "SyncLink GT/AC support"
+	depends on SERIAL_NONSTANDARD && PCI
+	help
+	  Support for SyncLink GT and SyncLink AC families of
+	  synchronous and asynchronous serial adapters
+	  manufactured by Microgate Systems, Ltd. (www.microgate.com)
+
+config N_HDLC
+	tristate "HDLC line discipline support"
+	depends on SERIAL_NONSTANDARD
+	help
+	  Allows synchronous HDLC communications with tty device drivers that
+	  support synchronous HDLC such as the Microgate SyncLink adapter.
+
+	  This driver can be built as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called n_hdlc. If you want to do that, say M
+	  here.
+
+config PPC_EPAPR_HV_BYTECHAN
+	bool "ePAPR hypervisor byte channel driver"
+	depends on PPC
+	select EPAPR_PARAVIRT
+	help
+	  This driver creates /dev entries for each ePAPR hypervisor byte
+	  channel, thereby allowing applications to communicate with byte
+	  channels as if they were serial ports.
+
+config PPC_EARLY_DEBUG_EHV_BC
+	bool "Early console (udbg) support for ePAPR hypervisors"
+	depends on PPC_EPAPR_HV_BYTECHAN=y
+	help
+	  Select this option to enable early console (a.k.a. "udbg") support
+	  via an ePAPR byte channel.  You also need to choose the byte channel
+	  handle below.
+
+config PPC_EARLY_DEBUG_EHV_BC_HANDLE
+	int "Byte channel handle for early console (udbg)"
+	depends on PPC_EARLY_DEBUG_EHV_BC
+	default 0
+	help
+	  If you want early console (udbg) output through a byte channel,
+	  specify the handle of the byte channel to use.
+
+	  For this to work, the byte channel driver must be compiled
+	  in-kernel, not as a module.
+
+	  Note that only one early console driver can be enabled, so don't
+	  enable any others if you enable this one.
+
+	  If the number you specify is not a valid byte channel handle, then
+	  there simply will be no early console output.  This is true also
+	  if you don't boot under a hypervisor at all.
+
+config GOLDFISH_TTY
+	tristate "Goldfish TTY Driver"
+	depends on GOLDFISH
+	select SERIAL_CORE
+	select SERIAL_CORE_CONSOLE
+	help
+	  Console and system TTY driver for the Goldfish virtual platform.
+
+config GOLDFISH_TTY_EARLY_CONSOLE
+	bool
+	default y if GOLDFISH_TTY=y
+	select SERIAL_EARLYCON
+
+config N_GSM
+	tristate "GSM MUX line discipline support (EXPERIMENTAL)"
+	depends on NET
+	help
+	  This line discipline provides support for the GSM MUX protocol and
+	  presents the mux as a set of 61 individual tty devices.
+
+config NOZOMI
+	tristate "HSDPA Broadband Wireless Data Card - Globe Trotter"
+	depends on PCI
+	help
+	  If you have a HSDPA driver Broadband Wireless Data Card -
+	  Globe Trotter PCMCIA card, say Y here.
+
+	  To compile this driver as a module, choose M here, the module
+	  will be called nozomi.
+
+config MIPS_EJTAG_FDC_TTY
+	bool "MIPS EJTAG Fast Debug Channel TTY"
+	depends on MIPS_CDMM
+	help
+	  This enables a TTY and console on the MIPS EJTAG Fast Debug Channels,
+	  if they are present. This can be useful when working with an EJTAG
+	  probe which supports it, to get console output and a login prompt via
+	  EJTAG without needing to connect a serial cable.
+
+	  TTY devices are named e.g. ttyFDC3c2 (for FDC channel 2 of the FDC on
+	  CPU3).
+
+	  The console can be enabled with console=fdc1 (for FDC channel 1 on all
+	  CPUs). Do not use the console unless there is a debug probe attached
+	  to drain the FDC TX FIFO.
+
+	  If unsure, say N.
+
+config MIPS_EJTAG_FDC_EARLYCON
+	bool "Early FDC console"
+	depends on MIPS_EJTAG_FDC_TTY
+	help
+	  This registers a console on FDC channel 1 very early during boot (from
+	  MIPS arch code). This is useful for bring-up and debugging early boot
+	  issues.
+
+	  Do not enable unless there is a debug probe attached to drain the FDC
+	  TX FIFO.
+
+	  If unsure, say N.
+
+config MIPS_EJTAG_FDC_KGDB
+	bool "Use KGDB over an FDC channel"
+	depends on MIPS_EJTAG_FDC_TTY && KGDB
+	default y
+	help
+	  This enables the use of KGDB over an FDC channel, allowing KGDB to be
+	  used remotely or when a serial port isn't available.
+
+config MIPS_EJTAG_FDC_KGDB_CHAN
+	int "KGDB FDC channel"
+	depends on MIPS_EJTAG_FDC_KGDB
+	range 2 15
+	default 3
+	help
+	  FDC channel number to use for KGDB.
+
+config NULL_TTY
+	tristate "NULL TTY driver"
+	help
+	  Say Y here if you want a NULL TTY which simply discards messages.
+
+	  This is useful to allow userspace applications which expect a console
+	  device to work without modifications even when no console is
+	  available or desired.
+
+	  In order to use this driver, you should redirect the console to this
+	  TTY, or boot the kernel with console=ttynull.
+
+	  If unsure, say N.
+
+config VCC
+	tristate "Sun Virtual Console Concentrator"
+	depends on SUN_LDOMS
+	help
+	  Support for Sun logical domain consoles.
+
+source "drivers/tty/hvc/Kconfig"
+
+config RPMSG_TTY
+	tristate "RPMSG tty driver"
+	depends on RPMSG
+	help
+	  Say y here to export rpmsg endpoints as tty devices, usually found
+	  in /dev/ttyRPMSGx.
+	  This makes it possible for user-space programs to send and receive
+	  rpmsg messages as a standard tty protocol.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called rpmsg_tty.
+
+endif # TTY
+
+source "drivers/tty/serdev/Kconfig"