Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 416 insertions, 0 deletions

diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
new file mode 100644
index 000000000..eeb7b43eb
--- /dev/null
+++ b/drivers/tty/serial/8250/8250.h
@@ -0,0 +1,416 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  Driver for 8250/16550-type serial ports
+ *
+ *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ *  Copyright (C) 2001 Russell King.
+ */
+
+#include <linux/bits.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+#include <linux/dmaengine.h>
+
+#include "../serial_mctrl_gpio.h"
+
+struct uart_8250_dma {
+	int (*tx_dma)(struct uart_8250_port *p);
+	int (*rx_dma)(struct uart_8250_port *p);
+	void (*prepare_tx_dma)(struct uart_8250_port *p);
+	void (*prepare_rx_dma)(struct uart_8250_port *p);
+
+	/* Filter function */
+	dma_filter_fn		fn;
+	/* Parameter to the filter function */
+	void			*rx_param;
+	void			*tx_param;
+
+	struct dma_slave_config	rxconf;
+	struct dma_slave_config	txconf;
+
+	struct dma_chan		*rxchan;
+	struct dma_chan		*txchan;
+
+	/* Device address base for DMA operations */
+	phys_addr_t		rx_dma_addr;
+	phys_addr_t		tx_dma_addr;
+
+	/* DMA address of the buffer in memory */
+	dma_addr_t		rx_addr;
+	dma_addr_t		tx_addr;
+
+	dma_cookie_t		rx_cookie;
+	dma_cookie_t		tx_cookie;
+
+	void			*rx_buf;
+
+	size_t			rx_size;
+	size_t			tx_size;
+
+	unsigned char		tx_running;
+	unsigned char		tx_err;
+	unsigned char		rx_running;
+};
+
+struct old_serial_port {
+	unsigned int uart;
+	unsigned int baud_base;
+	unsigned int port;
+	unsigned int irq;
+	upf_t        flags;
+	unsigned char io_type;
+	unsigned char __iomem *iomem_base;
+	unsigned short iomem_reg_shift;
+};
+
+struct serial8250_config {
+	const char	*name;
+	unsigned short	fifo_size;
+	unsigned short	tx_loadsz;
+	unsigned char	fcr;
+	unsigned char	rxtrig_bytes[UART_FCR_R_TRIG_MAX_STATE];
+	unsigned int	flags;
+};
+
+#define UART_CAP_FIFO	BIT(8)	/* UART has FIFO */
+#define UART_CAP_EFR	BIT(9)	/* UART has EFR */
+#define UART_CAP_SLEEP	BIT(10)	/* UART has IER sleep */
+#define UART_CAP_AFE	BIT(11)	/* MCR-based hw flow control */
+#define UART_CAP_UUE	BIT(12)	/* UART needs IER bit 6 set (Xscale) */
+#define UART_CAP_RTOIE	BIT(13)	/* UART needs IER bit 4 set (Xscale, Tegra) */
+#define UART_CAP_HFIFO	BIT(14)	/* UART has a "hidden" FIFO */
+#define UART_CAP_RPM	BIT(15)	/* Runtime PM is active while idle */
+#define UART_CAP_IRDA	BIT(16)	/* UART supports IrDA line discipline */
+#define UART_CAP_MINI	BIT(17)	/* Mini UART on BCM283X family lacks:
+					 * STOP PARITY EPAR SPAR WLEN5 WLEN6
+					 */
+#define UART_CAP_NOTEMT	BIT(18)	/* UART without interrupt on TEMT available */
+
+#define UART_BUG_QUOT	BIT(0)	/* UART has buggy quot LSB */
+#define UART_BUG_TXEN	BIT(1)	/* UART has buggy TX IIR status */
+#define UART_BUG_NOMSR	BIT(2)	/* UART has buggy MSR status bits (Au1x00) */
+#define UART_BUG_THRE	BIT(3)	/* UART has buggy THRE reassertion */
+#define UART_BUG_TXRACE	BIT(5)	/* UART Tx fails to set remote DR */
+
+
+#ifdef CONFIG_SERIAL_8250_SHARE_IRQ
+#define SERIAL8250_SHARE_IRQS 1
+#else
+#define SERIAL8250_SHARE_IRQS 0
+#endif
+
+#define SERIAL8250_PORT_FLAGS(_base, _irq, _flags)		\
+	{							\
+		.iobase		= _base,			\
+		.irq		= _irq,				\
+		.uartclk	= 1843200,			\
+		.iotype		= UPIO_PORT,			\
+		.flags		= UPF_BOOT_AUTOCONF | (_flags),	\
+	}
+
+#define SERIAL8250_PORT(_base, _irq) SERIAL8250_PORT_FLAGS(_base, _irq, 0)
+
+
+static inline int serial_in(struct uart_8250_port *up, int offset)
+{
+	return up->port.serial_in(&up->port, offset);
+}
+
+static inline void serial_out(struct uart_8250_port *up, int offset, int value)
+{
+	up->port.serial_out(&up->port, offset, value);
+}
+
+/**
+ *	serial_lsr_in - Read LSR register and preserve flags across reads
+ *	@up:	uart 8250 port
+ *
+ *	Read LSR register and handle saving non-preserved flags across reads.
+ *	The flags that are not preserved across reads are stored into
+ *	up->lsr_saved_flags.
+ *
+ *	Returns LSR value or'ed with the preserved flags (if any).
+ */
+static inline u16 serial_lsr_in(struct uart_8250_port *up)
+{
+	u16 lsr = up->lsr_saved_flags;
+
+	lsr |= serial_in(up, UART_LSR);
+	up->lsr_saved_flags = lsr & up->lsr_save_mask;
+
+	return lsr;
+}
+
+/*
+ * For the 16C950
+ */
+static void serial_icr_write(struct uart_8250_port *up, int offset, int value)
+{
+	serial_out(up, UART_SCR, offset);
+	serial_out(up, UART_ICR, value);
+}
+
+static unsigned int __maybe_unused serial_icr_read(struct uart_8250_port *up,
+						   int offset)
+{
+	unsigned int value;
+
+	serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD);
+	serial_out(up, UART_SCR, offset);
+	value = serial_in(up, UART_ICR);
+	serial_icr_write(up, UART_ACR, up->acr);
+
+	return value;
+}
+
+void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p);
+
+static inline int serial_dl_read(struct uart_8250_port *up)
+{
+	return up->dl_read(up);
+}
+
+static inline void serial_dl_write(struct uart_8250_port *up, int value)
+{
+	up->dl_write(up, value);
+}
+
+static inline bool serial8250_set_THRI(struct uart_8250_port *up)
+{
+	if (up->ier & UART_IER_THRI)
+		return false;
+	up->ier |= UART_IER_THRI;
+	serial_out(up, UART_IER, up->ier);
+	return true;
+}
+
+static inline bool serial8250_clear_THRI(struct uart_8250_port *up)
+{
+	if (!(up->ier & UART_IER_THRI))
+		return false;
+	up->ier &= ~UART_IER_THRI;
+	serial_out(up, UART_IER, up->ier);
+	return true;
+}
+
+struct uart_8250_port *serial8250_get_port(int line);
+
+void serial8250_rpm_get(struct uart_8250_port *p);
+void serial8250_rpm_put(struct uart_8250_port *p);
+
+void serial8250_rpm_get_tx(struct uart_8250_port *p);
+void serial8250_rpm_put_tx(struct uart_8250_port *p);
+
+int serial8250_em485_config(struct uart_port *port, struct ktermios *termios,
+			    struct serial_rs485 *rs485);
+void serial8250_em485_start_tx(struct uart_8250_port *p);
+void serial8250_em485_stop_tx(struct uart_8250_port *p);
+void serial8250_em485_destroy(struct uart_8250_port *p);
+extern struct serial_rs485 serial8250_em485_supported;
+
+/* MCR <-> TIOCM conversion */
+static inline int serial8250_TIOCM_to_MCR(int tiocm)
+{
+	int mcr = 0;
+
+	if (tiocm & TIOCM_RTS)
+		mcr |= UART_MCR_RTS;
+	if (tiocm & TIOCM_DTR)
+		mcr |= UART_MCR_DTR;
+	if (tiocm & TIOCM_OUT1)
+		mcr |= UART_MCR_OUT1;
+	if (tiocm & TIOCM_OUT2)
+		mcr |= UART_MCR_OUT2;
+	if (tiocm & TIOCM_LOOP)
+		mcr |= UART_MCR_LOOP;
+
+	return mcr;
+}
+
+static inline int serial8250_MCR_to_TIOCM(int mcr)
+{
+	int tiocm = 0;
+
+	if (mcr & UART_MCR_RTS)
+		tiocm |= TIOCM_RTS;
+	if (mcr & UART_MCR_DTR)
+		tiocm |= TIOCM_DTR;
+	if (mcr & UART_MCR_OUT1)
+		tiocm |= TIOCM_OUT1;
+	if (mcr & UART_MCR_OUT2)
+		tiocm |= TIOCM_OUT2;
+	if (mcr & UART_MCR_LOOP)
+		tiocm |= TIOCM_LOOP;
+
+	return tiocm;
+}
+
+/* MSR <-> TIOCM conversion */
+static inline int serial8250_MSR_to_TIOCM(int msr)
+{
+	int tiocm = 0;
+
+	if (msr & UART_MSR_DCD)
+		tiocm |= TIOCM_CAR;
+	if (msr & UART_MSR_RI)
+		tiocm |= TIOCM_RNG;
+	if (msr & UART_MSR_DSR)
+		tiocm |= TIOCM_DSR;
+	if (msr & UART_MSR_CTS)
+		tiocm |= TIOCM_CTS;
+
+	return tiocm;
+}
+
+static inline void serial8250_out_MCR(struct uart_8250_port *up, int value)
+{
+	serial_out(up, UART_MCR, value);
+
+	if (up->gpios)
+		mctrl_gpio_set(up->gpios, serial8250_MCR_to_TIOCM(value));
+}
+
+static inline int serial8250_in_MCR(struct uart_8250_port *up)
+{
+	int mctrl;
+
+	mctrl = serial_in(up, UART_MCR);
+
+	if (up->gpios) {
+		unsigned int mctrl_gpio = 0;
+
+		mctrl_gpio = mctrl_gpio_get_outputs(up->gpios, &mctrl_gpio);
+		mctrl |= serial8250_TIOCM_to_MCR(mctrl_gpio);
+	}
+
+	return mctrl;
+}
+
+bool alpha_jensen(void);
+void alpha_jensen_set_mctrl(struct uart_port *port, unsigned int mctrl);
+
+#ifdef CONFIG_SERIAL_8250_PNP
+int serial8250_pnp_init(void);
+void serial8250_pnp_exit(void);
+#else
+static inline int serial8250_pnp_init(void) { return 0; }
+static inline void serial8250_pnp_exit(void) { }
+#endif
+
+#ifdef CONFIG_SERIAL_8250_FINTEK
+int fintek_8250_probe(struct uart_8250_port *uart);
+#else
+static inline int fintek_8250_probe(struct uart_8250_port *uart) { return 0; }
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1
+#include <linux/soc/ti/omap1-soc.h>
+static inline int is_omap1_8250(struct uart_8250_port *pt)
+{
+	int res;
+
+	switch (pt->port.mapbase) {
+	case OMAP1_UART1_BASE:
+	case OMAP1_UART2_BASE:
+	case OMAP1_UART3_BASE:
+		res = 1;
+		break;
+	default:
+		res = 0;
+		break;
+	}
+
+	return res;
+}
+
+static inline int is_omap1510_8250(struct uart_8250_port *pt)
+{
+	if (!cpu_is_omap1510())
+		return 0;
+
+	return is_omap1_8250(pt);
+}
+#else
+static inline int is_omap1_8250(struct uart_8250_port *pt)
+{
+	return 0;
+}
+static inline int is_omap1510_8250(struct uart_8250_port *pt)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_SERIAL_8250_DMA
+extern int serial8250_tx_dma(struct uart_8250_port *);
+extern int serial8250_rx_dma(struct uart_8250_port *);
+extern void serial8250_rx_dma_flush(struct uart_8250_port *);
+extern int serial8250_request_dma(struct uart_8250_port *);
+extern void serial8250_release_dma(struct uart_8250_port *);
+
+static inline void serial8250_do_prepare_tx_dma(struct uart_8250_port *p)
+{
+	struct uart_8250_dma *dma = p->dma;
+
+	if (dma->prepare_tx_dma)
+		dma->prepare_tx_dma(p);
+}
+
+static inline void serial8250_do_prepare_rx_dma(struct uart_8250_port *p)
+{
+	struct uart_8250_dma *dma = p->dma;
+
+	if (dma->prepare_rx_dma)
+		dma->prepare_rx_dma(p);
+}
+
+static inline bool serial8250_tx_dma_running(struct uart_8250_port *p)
+{
+	struct uart_8250_dma *dma = p->dma;
+
+	return dma && dma->tx_running;
+}
+#else
+static inline int serial8250_tx_dma(struct uart_8250_port *p)
+{
+	return -1;
+}
+static inline int serial8250_rx_dma(struct uart_8250_port *p)
+{
+	return -1;
+}
+static inline void serial8250_rx_dma_flush(struct uart_8250_port *p) { }
+static inline int serial8250_request_dma(struct uart_8250_port *p)
+{
+	return -1;
+}
+static inline void serial8250_release_dma(struct uart_8250_port *p) { }
+
+static inline bool serial8250_tx_dma_running(struct uart_8250_port *p)
+{
+	return false;
+}
+#endif
+
+static inline int ns16550a_goto_highspeed(struct uart_8250_port *up)
+{
+	unsigned char status;
+
+	status = serial_in(up, 0x04); /* EXCR2 */
+#define PRESL(x) ((x) & 0x30)
+	if (PRESL(status) == 0x10) {
+		/* already in high speed mode */
+		return 0;
+	} else {
+		status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
+		status |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
+		serial_out(up, 0x04, status);
+	}
+	return 1;
+}
+
+static inline int serial_index(struct uart_port *port)
+{
+	return port->minor - 64;
+}