Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

7 files changed, 2648 insertions, 0 deletions

diff --git a/drivers/usb/c67x00/Makefile b/drivers/usb/c67x00/Makefile
new file mode 100644
index 000000000..0cde62d06
--- /dev/null
+++ b/drivers/usb/c67x00/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for Cypress C67X00 USB Controller
+#
+
+obj-$(CONFIG_USB_C67X00_HCD)	+= c67x00.o
+
+c67x00-y := c67x00-drv.o c67x00-ll-hpi.o c67x00-hcd.o c67x00-sched.o
diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c
new file mode 100644
index 000000000..6db5cb1b2
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-drv.c
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * c67x00-drv.c: Cypress C67X00 USB Common infrastructure
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ *    based on multiple host controller drivers inside the linux kernel.
+ */
+
+/*
+ * This file implements the common infrastructure for using the c67x00.
+ * It is both the link between the platform configuration and subdrivers and
+ * the link between the common hardware parts and the subdrivers (e.g.
+ * interrupt handling).
+ *
+ * The c67x00 has 2 SIE's (serial interface engine) which can be configured
+ * to be host, device or OTG (with some limitations, E.G. only SIE1 can be OTG).
+ *
+ * Depending on the platform configuration, the SIE's are created and
+ * the corresponding subdriver is initialized (c67x00_probe_sie).
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/c67x00.h>
+
+#include "c67x00.h"
+#include "c67x00-hcd.h"
+
+static void c67x00_probe_sie(struct c67x00_sie *sie,
+			     struct c67x00_device *dev, int sie_num)
+{
+	spin_lock_init(&sie->lock);
+	sie->dev = dev;
+	sie->sie_num = sie_num;
+	sie->mode = c67x00_sie_config(dev->pdata->sie_config, sie_num);
+
+	switch (sie->mode) {
+	case C67X00_SIE_HOST:
+		c67x00_hcd_probe(sie);
+		break;
+
+	case C67X00_SIE_UNUSED:
+		dev_info(sie_dev(sie),
+			 "Not using SIE %d as requested\n", sie->sie_num);
+		break;
+
+	default:
+		dev_err(sie_dev(sie),
+			"Unsupported configuration: 0x%x for SIE %d\n",
+			sie->mode, sie->sie_num);
+		break;
+	}
+}
+
+static void c67x00_remove_sie(struct c67x00_sie *sie)
+{
+	switch (sie->mode) {
+	case C67X00_SIE_HOST:
+		c67x00_hcd_remove(sie);
+		break;
+
+	default:
+		break;
+	}
+}
+
+static irqreturn_t c67x00_irq(int irq, void *__dev)
+{
+	struct c67x00_device *c67x00 = __dev;
+	struct c67x00_sie *sie;
+	u16 msg, int_status;
+	int i, count = 8;
+
+	int_status = c67x00_ll_hpi_status(c67x00);
+	if (!int_status)
+		return IRQ_NONE;
+
+	while (int_status != 0 && (count-- >= 0)) {
+		c67x00_ll_irq(c67x00, int_status);
+		for (i = 0; i < C67X00_SIES; i++) {
+			sie = &c67x00->sie[i];
+			msg = 0;
+			if (int_status & SIEMSG_FLG(i))
+				msg = c67x00_ll_fetch_siemsg(c67x00, i);
+			if (sie->irq)
+				sie->irq(sie, int_status, msg);
+		}
+		int_status = c67x00_ll_hpi_status(c67x00);
+	}
+
+	if (int_status)
+		dev_warn(&c67x00->pdev->dev, "Not all interrupts handled! "
+			 "status = 0x%04x\n", int_status);
+
+	return IRQ_HANDLED;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int c67x00_drv_probe(struct platform_device *pdev)
+{
+	struct c67x00_device *c67x00;
+	struct c67x00_platform_data *pdata;
+	struct resource *res, *res2;
+	int ret, i;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res2)
+		return -ENODEV;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	if (!pdata)
+		return -ENODEV;
+
+	c67x00 = kzalloc(sizeof(*c67x00), GFP_KERNEL);
+	if (!c67x00)
+		return -ENOMEM;
+
+	if (!request_mem_region(res->start, resource_size(res),
+				pdev->name)) {
+		dev_err(&pdev->dev, "Memory region busy\n");
+		ret = -EBUSY;
+		goto request_mem_failed;
+	}
+	c67x00->hpi.base = ioremap(res->start, resource_size(res));
+	if (!c67x00->hpi.base) {
+		dev_err(&pdev->dev, "Unable to map HPI registers\n");
+		ret = -EIO;
+		goto map_failed;
+	}
+
+	spin_lock_init(&c67x00->hpi.lock);
+	c67x00->hpi.regstep = pdata->hpi_regstep;
+	c67x00->pdata = dev_get_platdata(&pdev->dev);
+	c67x00->pdev = pdev;
+
+	c67x00_ll_init(c67x00);
+	c67x00_ll_hpi_reg_init(c67x00);
+
+	ret = request_irq(res2->start, c67x00_irq, 0, pdev->name, c67x00);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot claim IRQ\n");
+		goto request_irq_failed;
+	}
+
+	ret = c67x00_ll_reset(c67x00);
+	if (ret) {
+		dev_err(&pdev->dev, "Device reset failed\n");
+		goto reset_failed;
+	}
+
+	for (i = 0; i < C67X00_SIES; i++)
+		c67x00_probe_sie(&c67x00->sie[i], c67x00, i);
+
+	platform_set_drvdata(pdev, c67x00);
+
+	return 0;
+
+ reset_failed:
+	free_irq(res2->start, c67x00);
+ request_irq_failed:
+	iounmap(c67x00->hpi.base);
+ map_failed:
+	release_mem_region(res->start, resource_size(res));
+ request_mem_failed:
+	kfree(c67x00);
+
+	return ret;
+}
+
+static int c67x00_drv_remove(struct platform_device *pdev)
+{
+	struct c67x00_device *c67x00 = platform_get_drvdata(pdev);
+	struct resource *res;
+	int i;
+
+	for (i = 0; i < C67X00_SIES; i++)
+		c67x00_remove_sie(&c67x00->sie[i]);
+
+	c67x00_ll_release(c67x00);
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	free_irq(res->start, c67x00);
+
+	iounmap(c67x00->hpi.base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+
+	kfree(c67x00);
+
+	return 0;
+}
+
+static struct platform_driver c67x00_driver = {
+	.probe	= c67x00_drv_probe,
+	.remove	= c67x00_drv_remove,
+	.driver	= {
+		.name = "c67x00",
+	},
+};
+
+module_platform_driver(c67x00_driver);
+
+MODULE_AUTHOR("Peter Korsgaard, Jan Veldeman, Grant Likely");
+MODULE_DESCRIPTION("Cypress C67X00 USB Controller Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:c67x00");
diff --git a/drivers/usb/c67x00/c67x00-hcd.c b/drivers/usb/c67x00/c67x00-hcd.c
new file mode 100644
index 000000000..39f237666
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-hcd.c
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * c67x00-hcd.c: Cypress C67X00 USB Host Controller Driver
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ *    based on multiple host controller drivers inside the linux kernel.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/usb.h>
+
+#include "c67x00.h"
+#include "c67x00-hcd.h"
+
+/* --------------------------------------------------------------------------
+ * Root Hub Support
+ */
+
+static __u8 c67x00_hub_des[] = {
+	0x09,			/*  __u8  bLength; */
+	USB_DT_HUB,		/*  __u8  bDescriptorType; Hub-descriptor */
+	0x02,			/*  __u8  bNbrPorts; */
+	0x00,			/* __u16  wHubCharacteristics; */
+	0x00,			/*   (per-port OC, no power switching) */
+	0x32,			/*  __u8  bPwrOn2pwrGood; 2ms */
+	0x00,			/*  __u8  bHubContrCurrent; 0 mA */
+	0x00,			/*  __u8  DeviceRemovable; ** 7 Ports max ** */
+	0xff,			/*  __u8  PortPwrCtrlMask; ** 7 ports max ** */
+};
+
+static void c67x00_hub_reset_host_port(struct c67x00_sie *sie, int port)
+{
+	struct c67x00_hcd *c67x00 = sie->private_data;
+	unsigned long flags;
+
+	c67x00_ll_husb_reset(sie, port);
+
+	spin_lock_irqsave(&c67x00->lock, flags);
+	c67x00_ll_husb_reset_port(sie, port);
+	spin_unlock_irqrestore(&c67x00->lock, flags);
+
+	c67x00_ll_set_husb_eot(sie->dev, DEFAULT_EOT);
+}
+
+static int c67x00_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+	struct c67x00_sie *sie = c67x00->sie;
+	u16 status;
+	int i;
+
+	*buf = 0;
+	status = c67x00_ll_usb_get_status(sie);
+	for (i = 0; i < C67X00_PORTS; i++)
+		if (status & PORT_CONNECT_CHANGE(i))
+			*buf |= (1 << i);
+
+	/* bit 0 denotes hub change, b1..n port change */
+	*buf <<= 1;
+
+	return !!*buf;
+}
+
+static int c67x00_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+			      u16 wIndex, char *buf, u16 wLength)
+{
+	struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+	struct c67x00_sie *sie = c67x00->sie;
+	u16 status, usb_status;
+	int len = 0;
+	unsigned int port = wIndex-1;
+	u16 wPortChange, wPortStatus;
+
+	switch (typeReq) {
+
+	case GetHubStatus:
+		*(__le32 *) buf = cpu_to_le32(0);
+		len = 4;		/* hub power */
+		break;
+
+	case GetPortStatus:
+		if (wIndex > C67X00_PORTS)
+			return -EPIPE;
+
+		status = c67x00_ll_usb_get_status(sie);
+		usb_status = c67x00_ll_get_usb_ctl(sie);
+
+		wPortChange = 0;
+		if (status & PORT_CONNECT_CHANGE(port))
+			wPortChange |= USB_PORT_STAT_C_CONNECTION;
+
+		wPortStatus = USB_PORT_STAT_POWER;
+		if (!(status & PORT_SE0_STATUS(port)))
+			wPortStatus |= USB_PORT_STAT_CONNECTION;
+		if (usb_status & LOW_SPEED_PORT(port)) {
+			wPortStatus |= USB_PORT_STAT_LOW_SPEED;
+			c67x00->low_speed_ports |= (1 << port);
+		} else
+			c67x00->low_speed_ports &= ~(1 << port);
+
+		if (usb_status & SOF_EOP_EN(port))
+			wPortStatus |= USB_PORT_STAT_ENABLE;
+
+		*(__le16 *) buf = cpu_to_le16(wPortStatus);
+		*(__le16 *) (buf + 2) = cpu_to_le16(wPortChange);
+		len = 4;
+		break;
+
+	case SetHubFeature:	/* We don't implement these */
+	case ClearHubFeature:
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+		case C_HUB_LOCAL_POWER:
+			len = 0;
+			break;
+
+		default:
+			return -EPIPE;
+		}
+		break;
+
+	case SetPortFeature:
+		if (wIndex > C67X00_PORTS)
+			return -EPIPE;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			dev_dbg(c67x00_hcd_dev(c67x00),
+				"SetPortFeature %d (SUSPEND)\n", port);
+			len = 0;
+			break;
+
+		case USB_PORT_FEAT_RESET:
+			c67x00_hub_reset_host_port(sie, port);
+			len = 0;
+			break;
+
+		case USB_PORT_FEAT_POWER:
+			/* Power always enabled */
+			len = 0;
+			break;
+
+		default:
+			dev_dbg(c67x00_hcd_dev(c67x00),
+				"%s: SetPortFeature %d (0x%04x) Error!\n",
+				__func__, port, wValue);
+			return -EPIPE;
+		}
+		break;
+
+	case ClearPortFeature:
+		if (wIndex > C67X00_PORTS)
+			return -EPIPE;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			/* Reset the port so that the c67x00 also notices the
+			 * disconnect */
+			c67x00_hub_reset_host_port(sie, port);
+			len = 0;
+			break;
+
+		case USB_PORT_FEAT_C_ENABLE:
+			dev_dbg(c67x00_hcd_dev(c67x00),
+				"ClearPortFeature (%d): C_ENABLE\n", port);
+			len = 0;
+			break;
+
+		case USB_PORT_FEAT_SUSPEND:
+			dev_dbg(c67x00_hcd_dev(c67x00),
+				"ClearPortFeature (%d): SUSPEND\n", port);
+			len = 0;
+			break;
+
+		case USB_PORT_FEAT_C_SUSPEND:
+			dev_dbg(c67x00_hcd_dev(c67x00),
+				"ClearPortFeature (%d): C_SUSPEND\n", port);
+			len = 0;
+			break;
+
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(c67x00_hcd_dev(c67x00),
+				"ClearPortFeature (%d): POWER\n", port);
+			return -EPIPE;
+
+		case USB_PORT_FEAT_C_CONNECTION:
+			c67x00_ll_usb_clear_status(sie,
+						   PORT_CONNECT_CHANGE(port));
+			len = 0;
+			break;
+
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			dev_dbg(c67x00_hcd_dev(c67x00),
+				"ClearPortFeature (%d): OVER_CURRENT\n", port);
+			len = 0;
+			break;
+
+		case USB_PORT_FEAT_C_RESET:
+			dev_dbg(c67x00_hcd_dev(c67x00),
+				"ClearPortFeature (%d): C_RESET\n", port);
+			len = 0;
+			break;
+
+		default:
+			dev_dbg(c67x00_hcd_dev(c67x00),
+				"%s: ClearPortFeature %d (0x%04x) Error!\n",
+				__func__, port, wValue);
+			return -EPIPE;
+		}
+		break;
+
+	case GetHubDescriptor:
+		len = min_t(unsigned int, sizeof(c67x00_hub_des), wLength);
+		memcpy(buf, c67x00_hub_des, len);
+		break;
+
+	default:
+		dev_dbg(c67x00_hcd_dev(c67x00), "%s: unknown\n", __func__);
+		return -EPIPE;
+	}
+
+	return 0;
+}
+
+/* ---------------------------------------------------------------------
+ * Main part of host controller driver
+ */
+
+/*
+ * c67x00_hcd_irq
+ *
+ * This function is called from the interrupt handler in c67x00-drv.c
+ */
+static void c67x00_hcd_irq(struct c67x00_sie *sie, u16 int_status, u16 msg)
+{
+	struct c67x00_hcd *c67x00 = sie->private_data;
+	struct usb_hcd *hcd = c67x00_hcd_to_hcd(c67x00);
+
+	/* Handle sie message flags */
+	if (msg) {
+		if (msg & HUSB_TDListDone)
+			c67x00_sched_kick(c67x00);
+		else
+			dev_warn(c67x00_hcd_dev(c67x00),
+				 "Unknown SIE msg flag(s): 0x%04x\n", msg);
+	}
+
+	if (unlikely(hcd->state == HC_STATE_HALT))
+		return;
+
+	if (!HCD_HW_ACCESSIBLE(hcd))
+		return;
+
+	/* Handle Start of frame events */
+	if (int_status & SOFEOP_FLG(sie->sie_num)) {
+		c67x00_ll_usb_clear_status(sie, SOF_EOP_IRQ_FLG);
+		c67x00_sched_kick(c67x00);
+	}
+}
+
+/*
+ * c67x00_hcd_start: Host controller start hook
+ */
+static int c67x00_hcd_start(struct usb_hcd *hcd)
+{
+	hcd->uses_new_polling = 1;
+	hcd->state = HC_STATE_RUNNING;
+	set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+
+	return 0;
+}
+
+/*
+ * c67x00_hcd_stop: Host controller stop hook
+ */
+static void c67x00_hcd_stop(struct usb_hcd *hcd)
+{
+	/* Nothing to do */
+}
+
+static int c67x00_hcd_get_frame(struct usb_hcd *hcd)
+{
+	struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+	u16 temp_val;
+
+	dev_dbg(c67x00_hcd_dev(c67x00), "%s\n", __func__);
+	temp_val = c67x00_ll_husb_get_frame(c67x00->sie);
+	temp_val &= HOST_FRAME_MASK;
+	return temp_val ? (temp_val - 1) : HOST_FRAME_MASK;
+}
+
+static const struct hc_driver c67x00_hc_driver = {
+	.description	= "c67x00-hcd",
+	.product_desc	= "Cypress C67X00 Host Controller",
+	.hcd_priv_size	= sizeof(struct c67x00_hcd),
+	.flags		= HCD_USB11 | HCD_MEMORY,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.start		= c67x00_hcd_start,
+	.stop		= c67x00_hcd_stop,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue	= c67x00_urb_enqueue,
+	.urb_dequeue	= c67x00_urb_dequeue,
+	.endpoint_disable = c67x00_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number = c67x00_hcd_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data = c67x00_hub_status_data,
+	.hub_control	= c67x00_hub_control,
+};
+
+/* ---------------------------------------------------------------------
+ * Setup/Teardown routines
+ */
+
+int c67x00_hcd_probe(struct c67x00_sie *sie)
+{
+	struct c67x00_hcd *c67x00;
+	struct usb_hcd *hcd;
+	unsigned long flags;
+	int retval;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	hcd = usb_create_hcd(&c67x00_hc_driver, sie_dev(sie), "c67x00_sie");
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto err0;
+	}
+	c67x00 = hcd_to_c67x00_hcd(hcd);
+
+	spin_lock_init(&c67x00->lock);
+	c67x00->sie = sie;
+
+	INIT_LIST_HEAD(&c67x00->list[PIPE_ISOCHRONOUS]);
+	INIT_LIST_HEAD(&c67x00->list[PIPE_INTERRUPT]);
+	INIT_LIST_HEAD(&c67x00->list[PIPE_CONTROL]);
+	INIT_LIST_HEAD(&c67x00->list[PIPE_BULK]);
+	c67x00->urb_count = 0;
+	INIT_LIST_HEAD(&c67x00->td_list);
+	c67x00->td_base_addr = CY_HCD_BUF_ADDR + SIE_TD_OFFSET(sie->sie_num);
+	c67x00->buf_base_addr = CY_HCD_BUF_ADDR + SIE_BUF_OFFSET(sie->sie_num);
+	c67x00->max_frame_bw = MAX_FRAME_BW_STD;
+
+	c67x00_ll_husb_init_host_port(sie);
+
+	init_completion(&c67x00->endpoint_disable);
+	retval = c67x00_sched_start_scheduler(c67x00);
+	if (retval)
+		goto err1;
+
+	retval = usb_add_hcd(hcd, 0, 0);
+	if (retval) {
+		dev_dbg(sie_dev(sie), "%s: usb_add_hcd returned %d\n",
+			__func__, retval);
+		goto err2;
+	}
+
+	device_wakeup_enable(hcd->self.controller);
+
+	spin_lock_irqsave(&sie->lock, flags);
+	sie->private_data = c67x00;
+	sie->irq = c67x00_hcd_irq;
+	spin_unlock_irqrestore(&sie->lock, flags);
+
+	return retval;
+
+ err2:
+	c67x00_sched_stop_scheduler(c67x00);
+ err1:
+	usb_put_hcd(hcd);
+ err0:
+	return retval;
+}
+
+/* may be called with controller, bus, and devices active */
+void c67x00_hcd_remove(struct c67x00_sie *sie)
+{
+	struct c67x00_hcd *c67x00 = sie->private_data;
+	struct usb_hcd *hcd = c67x00_hcd_to_hcd(c67x00);
+
+	c67x00_sched_stop_scheduler(c67x00);
+	usb_remove_hcd(hcd);
+	usb_put_hcd(hcd);
+}
diff --git a/drivers/usb/c67x00/c67x00-hcd.h b/drivers/usb/c67x00/c67x00-hcd.h
new file mode 100644
index 000000000..6332a6b5d
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-hcd.h
@@ -0,0 +1,119 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * c67x00-hcd.h: Cypress C67X00 USB HCD
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ *    based on multiple host controller drivers inside the linux kernel.
+ */
+
+#ifndef _USB_C67X00_HCD_H
+#define _USB_C67X00_HCD_H
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include "c67x00.h"
+
+/*
+ * The following parameters depend on the CPU speed, bus speed, ...
+ * These can be tuned for specific use cases, e.g. if isochronous transfers
+ * are very important, bandwidth can be sacrificed to guarantee that the
+ * 1ms deadline will be met.
+ * If bulk transfers are important, the MAX_FRAME_BW can be increased,
+ * but some (or many) isochronous deadlines might not be met.
+ *
+ * The values are specified in bittime.
+ */
+
+/*
+ * The current implementation switches between _STD (default) and _ISO (when
+ * isochronous transfers are scheduled), in order to optimize the throughput
+ * in normal circumstances, but also provide good isochronous behaviour.
+ *
+ * Bandwidth is described in bit time so with a 12MHz USB clock and 1ms
+ * frames; there are 12000 bit times per frame.
+ */
+
+#define TOTAL_FRAME_BW		12000
+#define DEFAULT_EOT		2250
+
+#define MAX_FRAME_BW_STD	(TOTAL_FRAME_BW - DEFAULT_EOT)
+#define MAX_FRAME_BW_ISO	2400
+
+/*
+ * Periodic transfers may only use 90% of the full frame, but as
+ * we currently don't even use 90% of the full frame, we may
+ * use the full usable time for periodic transfers.
+ */
+#define MAX_PERIODIC_BW(full_bw)	full_bw
+
+/* -------------------------------------------------------------------------- */
+
+struct c67x00_hcd {
+	spinlock_t lock;
+	struct c67x00_sie *sie;
+	unsigned int low_speed_ports;	/* bitmask of low speed ports */
+	unsigned int urb_count;
+	unsigned int urb_iso_count;
+
+	struct list_head list[4];	/* iso, int, ctrl, bulk */
+#if PIPE_BULK != 3
+#error "Sanity check failed, this code presumes PIPE_... to range from 0 to 3"
+#endif
+
+	/* USB bandwidth allocated to td_list */
+	int bandwidth_allocated;
+	/* USB bandwidth allocated for isoc/int transfer */
+	int periodic_bw_allocated;
+	struct list_head td_list;
+	int max_frame_bw;
+
+	u16 td_base_addr;
+	u16 buf_base_addr;
+	u16 next_td_addr;
+	u16 next_buf_addr;
+
+	struct work_struct work;
+
+	struct completion endpoint_disable;
+
+	u16 current_frame;
+	u16 last_frame;
+};
+
+static inline struct c67x00_hcd *hcd_to_c67x00_hcd(struct usb_hcd *hcd)
+{
+	return (struct c67x00_hcd *)(hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *c67x00_hcd_to_hcd(struct c67x00_hcd *c67x00)
+{
+	return container_of((void *)c67x00, struct usb_hcd, hcd_priv);
+}
+
+/* ---------------------------------------------------------------------
+ * Functions used by c67x00-drv
+ */
+
+int c67x00_hcd_probe(struct c67x00_sie *sie);
+void c67x00_hcd_remove(struct c67x00_sie *sie);
+
+/* ---------------------------------------------------------------------
+ * Transfer Descriptor scheduling functions
+ */
+int c67x00_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
+int c67x00_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
+void c67x00_endpoint_disable(struct usb_hcd *hcd,
+			     struct usb_host_endpoint *ep);
+
+void c67x00_hcd_msg_received(struct c67x00_sie *sie, u16 msg);
+void c67x00_sched_kick(struct c67x00_hcd *c67x00);
+int c67x00_sched_start_scheduler(struct c67x00_hcd *c67x00);
+void c67x00_sched_stop_scheduler(struct c67x00_hcd *c67x00);
+
+#define c67x00_hcd_dev(x)	(c67x00_hcd_to_hcd(x)->self.controller)
+
+#endif				/* _USB_C67X00_HCD_H */
diff --git a/drivers/usb/c67x00/c67x00-ll-hpi.c b/drivers/usb/c67x00/c67x00-ll-hpi.c
new file mode 100644
index 000000000..7a214a3a6
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-ll-hpi.c
@@ -0,0 +1,477 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * c67x00-ll-hpi.c: Cypress C67X00 USB Low level interface using HPI
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ *    based on multiple host controller drivers inside the linux kernel.
+ */
+
+#include <asm/byteorder.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/usb/c67x00.h>
+#include "c67x00.h"
+
+#define COMM_REGS 14
+
+struct c67x00_lcp_int_data {
+	u16 regs[COMM_REGS];
+};
+
+/* -------------------------------------------------------------------------- */
+/* Interface definitions */
+
+#define COMM_ACK			0x0FED
+#define COMM_NAK			0xDEAD
+
+#define COMM_RESET			0xFA50
+#define COMM_EXEC_INT			0xCE01
+#define COMM_INT_NUM			0x01C2
+
+/* Registers 0 to COMM_REGS-1 */
+#define COMM_R(x)			(0x01C4 + 2 * (x))
+
+#define HUSB_SIE_pCurrentTDPtr(x)	((x) ? 0x01B2 : 0x01B0)
+#define HUSB_SIE_pTDListDone_Sem(x)	((x) ? 0x01B8 : 0x01B6)
+#define HUSB_pEOT			0x01B4
+
+/* Software interrupts */
+/* 114, 115: */
+#define HUSB_SIE_INIT_INT(x)		((x) ? 0x0073 : 0x0072)
+#define HUSB_RESET_INT			0x0074
+
+#define SUSB_INIT_INT			0x0071
+#define SUSB_INIT_INT_LOC		(SUSB_INIT_INT * 2)
+
+/* -----------------------------------------------------------------------
+ * HPI implementation
+ *
+ * The c67x00 chip also support control via SPI or HSS serial
+ * interfaces. However, this driver assumes that register access can
+ * be performed from IRQ context. While this is a safe assumption with
+ * the HPI interface, it is not true for the serial interfaces.
+ */
+
+/* HPI registers */
+#define HPI_DATA	0
+#define HPI_MAILBOX	1
+#define HPI_ADDR	2
+#define HPI_STATUS	3
+
+/*
+ * According to CY7C67300 specification (tables 140 and 141) HPI read and
+ * write cycle duration Tcyc must be at least 6T long, where T is 1/48MHz,
+ * which is 125ns.
+ */
+#define HPI_T_CYC_NS	125
+
+static inline u16 hpi_read_reg(struct c67x00_device *dev, int reg)
+{
+	ndelay(HPI_T_CYC_NS);
+	return __raw_readw(dev->hpi.base + reg * dev->hpi.regstep);
+}
+
+static inline void hpi_write_reg(struct c67x00_device *dev, int reg, u16 value)
+{
+	ndelay(HPI_T_CYC_NS);
+	__raw_writew(value, dev->hpi.base + reg * dev->hpi.regstep);
+}
+
+static inline u16 hpi_read_word_nolock(struct c67x00_device *dev, u16 reg)
+{
+	hpi_write_reg(dev, HPI_ADDR, reg);
+	return hpi_read_reg(dev, HPI_DATA);
+}
+
+static u16 hpi_read_word(struct c67x00_device *dev, u16 reg)
+{
+	u16 value;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hpi.lock, flags);
+	value = hpi_read_word_nolock(dev, reg);
+	spin_unlock_irqrestore(&dev->hpi.lock, flags);
+
+	return value;
+}
+
+static void hpi_write_word_nolock(struct c67x00_device *dev, u16 reg, u16 value)
+{
+	hpi_write_reg(dev, HPI_ADDR, reg);
+	hpi_write_reg(dev, HPI_DATA, value);
+}
+
+static void hpi_write_word(struct c67x00_device *dev, u16 reg, u16 value)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hpi.lock, flags);
+	hpi_write_word_nolock(dev, reg, value);
+	spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+/*
+ * Only data is little endian, addr has cpu endianess
+ */
+static void hpi_write_words_le16(struct c67x00_device *dev, u16 addr,
+				 __le16 *data, u16 count)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&dev->hpi.lock, flags);
+
+	hpi_write_reg(dev, HPI_ADDR, addr);
+	for (i = 0; i < count; i++)
+		hpi_write_reg(dev, HPI_DATA, le16_to_cpu(*data++));
+
+	spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+/*
+ * Only data is little endian, addr has cpu endianess
+ */
+static void hpi_read_words_le16(struct c67x00_device *dev, u16 addr,
+				__le16 *data, u16 count)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&dev->hpi.lock, flags);
+	hpi_write_reg(dev, HPI_ADDR, addr);
+	for (i = 0; i < count; i++)
+		*data++ = cpu_to_le16(hpi_read_reg(dev, HPI_DATA));
+
+	spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+static void hpi_set_bits(struct c67x00_device *dev, u16 reg, u16 mask)
+{
+	u16 value;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hpi.lock, flags);
+	value = hpi_read_word_nolock(dev, reg);
+	hpi_write_word_nolock(dev, reg, value | mask);
+	spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+static void hpi_clear_bits(struct c67x00_device *dev, u16 reg, u16 mask)
+{
+	u16 value;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hpi.lock, flags);
+	value = hpi_read_word_nolock(dev, reg);
+	hpi_write_word_nolock(dev, reg, value & ~mask);
+	spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+static u16 hpi_recv_mbox(struct c67x00_device *dev)
+{
+	u16 value;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hpi.lock, flags);
+	value = hpi_read_reg(dev, HPI_MAILBOX);
+	spin_unlock_irqrestore(&dev->hpi.lock, flags);
+
+	return value;
+}
+
+static u16 hpi_send_mbox(struct c67x00_device *dev, u16 value)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hpi.lock, flags);
+	hpi_write_reg(dev, HPI_MAILBOX, value);
+	spin_unlock_irqrestore(&dev->hpi.lock, flags);
+
+	return value;
+}
+
+u16 c67x00_ll_hpi_status(struct c67x00_device *dev)
+{
+	u16 value;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hpi.lock, flags);
+	value = hpi_read_reg(dev, HPI_STATUS);
+	spin_unlock_irqrestore(&dev->hpi.lock, flags);
+
+	return value;
+}
+
+void c67x00_ll_hpi_reg_init(struct c67x00_device *dev)
+{
+	int i;
+
+	hpi_recv_mbox(dev);
+	c67x00_ll_hpi_status(dev);
+	hpi_write_word(dev, HPI_IRQ_ROUTING_REG, 0);
+
+	for (i = 0; i < C67X00_SIES; i++) {
+		hpi_write_word(dev, SIEMSG_REG(i), 0);
+		hpi_read_word(dev, SIEMSG_REG(i));
+	}
+}
+
+void c67x00_ll_hpi_enable_sofeop(struct c67x00_sie *sie)
+{
+	hpi_set_bits(sie->dev, HPI_IRQ_ROUTING_REG,
+		     SOFEOP_TO_HPI_EN(sie->sie_num));
+}
+
+void c67x00_ll_hpi_disable_sofeop(struct c67x00_sie *sie)
+{
+	hpi_clear_bits(sie->dev, HPI_IRQ_ROUTING_REG,
+		       SOFEOP_TO_HPI_EN(sie->sie_num));
+}
+
+/* -------------------------------------------------------------------------- */
+/* Transactions */
+
+static inline int ll_recv_msg(struct c67x00_device *dev)
+{
+	u16 res;
+
+	res = wait_for_completion_timeout(&dev->hpi.lcp.msg_received, 5 * HZ);
+	WARN_ON(!res);
+
+	return (res == 0) ? -EIO : 0;
+}
+
+/* -------------------------------------------------------------------------- */
+/* General functions */
+
+u16 c67x00_ll_fetch_siemsg(struct c67x00_device *dev, int sie_num)
+{
+	u16 val;
+
+	val = hpi_read_word(dev, SIEMSG_REG(sie_num));
+	/* clear register to allow next message */
+	hpi_write_word(dev, SIEMSG_REG(sie_num), 0);
+
+	return val;
+}
+
+u16 c67x00_ll_get_usb_ctl(struct c67x00_sie *sie)
+{
+	return hpi_read_word(sie->dev, USB_CTL_REG(sie->sie_num));
+}
+
+/*
+ * c67x00_ll_usb_clear_status - clear the USB status bits
+ */
+void c67x00_ll_usb_clear_status(struct c67x00_sie *sie, u16 bits)
+{
+	hpi_write_word(sie->dev, USB_STAT_REG(sie->sie_num), bits);
+}
+
+u16 c67x00_ll_usb_get_status(struct c67x00_sie *sie)
+{
+	return hpi_read_word(sie->dev, USB_STAT_REG(sie->sie_num));
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int c67x00_comm_exec_int(struct c67x00_device *dev, u16 nr,
+				struct c67x00_lcp_int_data *data)
+{
+	int i, rc;
+
+	mutex_lock(&dev->hpi.lcp.mutex);
+	hpi_write_word(dev, COMM_INT_NUM, nr);
+	for (i = 0; i < COMM_REGS; i++)
+		hpi_write_word(dev, COMM_R(i), data->regs[i]);
+	hpi_send_mbox(dev, COMM_EXEC_INT);
+	rc = ll_recv_msg(dev);
+	mutex_unlock(&dev->hpi.lcp.mutex);
+
+	return rc;
+}
+
+/* -------------------------------------------------------------------------- */
+/* Host specific functions */
+
+void c67x00_ll_set_husb_eot(struct c67x00_device *dev, u16 value)
+{
+	mutex_lock(&dev->hpi.lcp.mutex);
+	hpi_write_word(dev, HUSB_pEOT, value);
+	mutex_unlock(&dev->hpi.lcp.mutex);
+}
+
+static inline void c67x00_ll_husb_sie_init(struct c67x00_sie *sie)
+{
+	struct c67x00_device *dev = sie->dev;
+	struct c67x00_lcp_int_data data;
+	int rc;
+
+	rc = c67x00_comm_exec_int(dev, HUSB_SIE_INIT_INT(sie->sie_num), &data);
+	BUG_ON(rc); /* No return path for error code; crash spectacularly */
+}
+
+void c67x00_ll_husb_reset(struct c67x00_sie *sie, int port)
+{
+	struct c67x00_device *dev = sie->dev;
+	struct c67x00_lcp_int_data data;
+	int rc;
+
+	data.regs[0] = 50;	/* Reset USB port for 50ms */
+	data.regs[1] = port | (sie->sie_num << 1);
+	rc = c67x00_comm_exec_int(dev, HUSB_RESET_INT, &data);
+	BUG_ON(rc); /* No return path for error code; crash spectacularly */
+}
+
+void c67x00_ll_husb_set_current_td(struct c67x00_sie *sie, u16 addr)
+{
+	hpi_write_word(sie->dev, HUSB_SIE_pCurrentTDPtr(sie->sie_num), addr);
+}
+
+u16 c67x00_ll_husb_get_current_td(struct c67x00_sie *sie)
+{
+	return hpi_read_word(sie->dev, HUSB_SIE_pCurrentTDPtr(sie->sie_num));
+}
+
+u16 c67x00_ll_husb_get_frame(struct c67x00_sie *sie)
+{
+	return hpi_read_word(sie->dev, HOST_FRAME_REG(sie->sie_num));
+}
+
+void c67x00_ll_husb_init_host_port(struct c67x00_sie *sie)
+{
+	/* Set port into host mode */
+	hpi_set_bits(sie->dev, USB_CTL_REG(sie->sie_num), HOST_MODE);
+	c67x00_ll_husb_sie_init(sie);
+	/* Clear interrupts */
+	c67x00_ll_usb_clear_status(sie, HOST_STAT_MASK);
+	/* Check */
+	if (!(hpi_read_word(sie->dev, USB_CTL_REG(sie->sie_num)) & HOST_MODE))
+		dev_warn(sie_dev(sie),
+			 "SIE %d not set to host mode\n", sie->sie_num);
+}
+
+void c67x00_ll_husb_reset_port(struct c67x00_sie *sie, int port)
+{
+	/* Clear connect change */
+	c67x00_ll_usb_clear_status(sie, PORT_CONNECT_CHANGE(port));
+
+	/* Enable interrupts */
+	hpi_set_bits(sie->dev, HPI_IRQ_ROUTING_REG,
+		     SOFEOP_TO_CPU_EN(sie->sie_num));
+	hpi_set_bits(sie->dev, HOST_IRQ_EN_REG(sie->sie_num),
+		     SOF_EOP_IRQ_EN | DONE_IRQ_EN);
+
+	/* Enable pull down transistors */
+	hpi_set_bits(sie->dev, USB_CTL_REG(sie->sie_num), PORT_RES_EN(port));
+}
+
+/* -------------------------------------------------------------------------- */
+
+void c67x00_ll_irq(struct c67x00_device *dev, u16 int_status)
+{
+	if ((int_status & MBX_OUT_FLG) == 0)
+		return;
+
+	dev->hpi.lcp.last_msg = hpi_recv_mbox(dev);
+	complete(&dev->hpi.lcp.msg_received);
+}
+
+/* -------------------------------------------------------------------------- */
+
+int c67x00_ll_reset(struct c67x00_device *dev)
+{
+	int rc;
+
+	mutex_lock(&dev->hpi.lcp.mutex);
+	hpi_send_mbox(dev, COMM_RESET);
+	rc = ll_recv_msg(dev);
+	mutex_unlock(&dev->hpi.lcp.mutex);
+
+	return rc;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * c67x00_ll_write_mem_le16 - write into c67x00 memory
+ * Only data is little endian, addr has cpu endianess.
+ */
+void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr,
+			      void *data, int len)
+{
+	u8 *buf = data;
+
+	/* Sanity check */
+	if (addr + len > 0xffff) {
+		dev_err(&dev->pdev->dev,
+			"Trying to write beyond writable region!\n");
+		return;
+	}
+
+	if (addr & 0x01) {
+		/* unaligned access */
+		u16 tmp;
+		tmp = hpi_read_word(dev, addr - 1);
+		tmp = (tmp & 0x00ff) | (*buf++ << 8);
+		hpi_write_word(dev, addr - 1, tmp);
+		addr++;
+		len--;
+	}
+
+	hpi_write_words_le16(dev, addr, (__le16 *)buf, len / 2);
+	buf += len & ~0x01;
+	addr += len & ~0x01;
+	len &= 0x01;
+
+	if (len) {
+		u16 tmp;
+		tmp = hpi_read_word(dev, addr);
+		tmp = (tmp & 0xff00) | *buf;
+		hpi_write_word(dev, addr, tmp);
+	}
+}
+
+/*
+ * c67x00_ll_read_mem_le16 - read from c67x00 memory
+ * Only data is little endian, addr has cpu endianess.
+ */
+void c67x00_ll_read_mem_le16(struct c67x00_device *dev, u16 addr,
+			     void *data, int len)
+{
+	u8 *buf = data;
+
+	if (addr & 0x01) {
+		/* unaligned access */
+		u16 tmp;
+		tmp = hpi_read_word(dev, addr - 1);
+		*buf++ = (tmp >> 8) & 0x00ff;
+		addr++;
+		len--;
+	}
+
+	hpi_read_words_le16(dev, addr, (__le16 *)buf, len / 2);
+	buf += len & ~0x01;
+	addr += len & ~0x01;
+	len &= 0x01;
+
+	if (len) {
+		u16 tmp;
+		tmp = hpi_read_word(dev, addr);
+		*buf = tmp & 0x00ff;
+	}
+}
+
+/* -------------------------------------------------------------------------- */
+
+void c67x00_ll_init(struct c67x00_device *dev)
+{
+	mutex_init(&dev->hpi.lcp.mutex);
+	init_completion(&dev->hpi.lcp.msg_received);
+}
+
+void c67x00_ll_release(struct c67x00_device *dev)
+{
+}
diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c
new file mode 100644
index 000000000..a09fa68a6
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-sched.c
@@ -0,0 +1,1148 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * c67x00-sched.c: Cypress C67X00 USB Host Controller Driver - TD scheduling
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ *    based on multiple host controller drivers inside the linux kernel.
+ */
+
+#include <linux/kthread.h>
+#include <linux/slab.h>
+
+#include "c67x00.h"
+#include "c67x00-hcd.h"
+
+/*
+ * These are the stages for a control urb, they are kept
+ * in both urb->interval and td->privdata.
+ */
+#define SETUP_STAGE		0
+#define DATA_STAGE		1
+#define STATUS_STAGE		2
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * struct c67x00_ep_data: Host endpoint data structure
+ */
+struct c67x00_ep_data {
+	struct list_head queue;
+	struct list_head node;
+	struct usb_host_endpoint *hep;
+	struct usb_device *dev;
+	u16 next_frame;		/* For int/isoc transactions */
+};
+
+/*
+ * struct c67x00_td
+ *
+ * Hardware parts are little endiannes, SW in CPU endianess.
+ */
+struct c67x00_td {
+	/* HW specific part */
+	__le16 ly_base_addr;	/* Bytes 0-1 */
+	__le16 port_length;	/* Bytes 2-3 */
+	u8 pid_ep;		/* Byte 4 */
+	u8 dev_addr;		/* Byte 5 */
+	u8 ctrl_reg;		/* Byte 6 */
+	u8 status;		/* Byte 7 */
+	u8 retry_cnt;		/* Byte 8 */
+#define TT_OFFSET		2
+#define TT_CONTROL		0
+#define TT_ISOCHRONOUS		1
+#define TT_BULK			2
+#define TT_INTERRUPT		3
+	u8 residue;		/* Byte 9 */
+	__le16 next_td_addr;	/* Bytes 10-11 */
+	/* SW part */
+	struct list_head td_list;
+	u16 td_addr;
+	void *data;
+	struct urb *urb;
+	unsigned long privdata;
+
+	/* These are needed for handling the toggle bits:
+	 * an urb can be dequeued while a td is in progress
+	 * after checking the td, the toggle bit might need to
+	 * be fixed */
+	struct c67x00_ep_data *ep_data;
+	unsigned int pipe;
+};
+
+struct c67x00_urb_priv {
+	struct list_head hep_node;
+	struct urb *urb;
+	int port;
+	int cnt;		/* packet number for isoc */
+	int status;
+	struct c67x00_ep_data *ep_data;
+};
+
+#define td_udev(td)	((td)->ep_data->dev)
+
+#define CY_TD_SIZE		12
+
+#define TD_PIDEP_OFFSET		0x04
+#define TD_PIDEPMASK_PID	0xF0
+#define TD_PIDEPMASK_EP		0x0F
+#define TD_PORTLENMASK_DL	0x03FF
+#define TD_PORTLENMASK_PN	0xC000
+
+#define TD_STATUS_OFFSET	0x07
+#define TD_STATUSMASK_ACK	0x01
+#define TD_STATUSMASK_ERR	0x02
+#define TD_STATUSMASK_TMOUT	0x04
+#define TD_STATUSMASK_SEQ	0x08
+#define TD_STATUSMASK_SETUP	0x10
+#define TD_STATUSMASK_OVF	0x20
+#define TD_STATUSMASK_NAK	0x40
+#define TD_STATUSMASK_STALL	0x80
+
+#define TD_ERROR_MASK		(TD_STATUSMASK_ERR | TD_STATUSMASK_TMOUT | \
+				 TD_STATUSMASK_STALL)
+
+#define TD_RETRYCNT_OFFSET	0x08
+#define TD_RETRYCNTMASK_ACT_FLG	0x10
+#define TD_RETRYCNTMASK_TX_TYPE	0x0C
+#define TD_RETRYCNTMASK_RTY_CNT	0x03
+
+#define TD_RESIDUE_OVERFLOW	0x80
+
+#define TD_PID_IN		0x90
+
+/* Residue: signed 8bits, neg -> OVERFLOW, pos -> UNDERFLOW */
+#define td_residue(td)		((__s8)(td->residue))
+#define td_ly_base_addr(td)	(__le16_to_cpu((td)->ly_base_addr))
+#define td_port_length(td)	(__le16_to_cpu((td)->port_length))
+#define td_next_td_addr(td)	(__le16_to_cpu((td)->next_td_addr))
+
+#define td_active(td)		((td)->retry_cnt & TD_RETRYCNTMASK_ACT_FLG)
+#define td_length(td)		(td_port_length(td) & TD_PORTLENMASK_DL)
+
+#define td_sequence_ok(td)	(!td->status || \
+				 (!(td->status & TD_STATUSMASK_SEQ) ==	\
+				  !(td->ctrl_reg & SEQ_SEL)))
+
+#define td_acked(td)		(!td->status || \
+				 (td->status & TD_STATUSMASK_ACK))
+#define td_actual_bytes(td)	(td_length(td) - td_residue(td))
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * dbg_td - Dump the contents of the TD
+ */
+static void dbg_td(struct c67x00_hcd *c67x00, struct c67x00_td *td, char *msg)
+{
+	struct device *dev = c67x00_hcd_dev(c67x00);
+
+	dev_dbg(dev, "### %s at 0x%04x\n", msg, td->td_addr);
+	dev_dbg(dev, "urb:      0x%p\n", td->urb);
+	dev_dbg(dev, "endpoint:   %4d\n", usb_pipeendpoint(td->pipe));
+	dev_dbg(dev, "pipeout:    %4d\n", usb_pipeout(td->pipe));
+	dev_dbg(dev, "ly_base_addr: 0x%04x\n", td_ly_base_addr(td));
+	dev_dbg(dev, "port_length:  0x%04x\n", td_port_length(td));
+	dev_dbg(dev, "pid_ep:         0x%02x\n", td->pid_ep);
+	dev_dbg(dev, "dev_addr:       0x%02x\n", td->dev_addr);
+	dev_dbg(dev, "ctrl_reg:       0x%02x\n", td->ctrl_reg);
+	dev_dbg(dev, "status:         0x%02x\n", td->status);
+	dev_dbg(dev, "retry_cnt:      0x%02x\n", td->retry_cnt);
+	dev_dbg(dev, "residue:        0x%02x\n", td->residue);
+	dev_dbg(dev, "next_td_addr: 0x%04x\n", td_next_td_addr(td));
+	dev_dbg(dev, "data: %*ph\n", td_length(td), td->data);
+}
+
+/* -------------------------------------------------------------------------- */
+/* Helper functions */
+
+static inline u16 c67x00_get_current_frame_number(struct c67x00_hcd *c67x00)
+{
+	return c67x00_ll_husb_get_frame(c67x00->sie) & HOST_FRAME_MASK;
+}
+
+/*
+ * frame_add
+ * Software wraparound for framenumbers.
+ */
+static inline u16 frame_add(u16 a, u16 b)
+{
+	return (a + b) & HOST_FRAME_MASK;
+}
+
+/*
+ * frame_after - is frame a after frame b
+ */
+static inline int frame_after(u16 a, u16 b)
+{
+	return ((HOST_FRAME_MASK + a - b) & HOST_FRAME_MASK) <
+	    (HOST_FRAME_MASK / 2);
+}
+
+/*
+ * frame_after_eq - is frame a after or equal to frame b
+ */
+static inline int frame_after_eq(u16 a, u16 b)
+{
+	return ((HOST_FRAME_MASK + 1 + a - b) & HOST_FRAME_MASK) <
+	    (HOST_FRAME_MASK / 2);
+}
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * c67x00_release_urb - remove link from all tds to this urb
+ * Disconnects the urb from it's tds, so that it can be given back.
+ * pre: urb->hcpriv != NULL
+ */
+static void c67x00_release_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+	struct c67x00_td *td;
+	struct c67x00_urb_priv *urbp;
+
+	BUG_ON(!urb);
+
+	c67x00->urb_count--;
+
+	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+		c67x00->urb_iso_count--;
+		if (c67x00->urb_iso_count == 0)
+			c67x00->max_frame_bw = MAX_FRAME_BW_STD;
+	}
+
+	/* TODO this might be not so efficient when we've got many urbs!
+	 * Alternatives:
+	 *   * only clear when needed
+	 *   * keep a list of tds with each urbp
+	 */
+	list_for_each_entry(td, &c67x00->td_list, td_list)
+		if (urb == td->urb)
+			td->urb = NULL;
+
+	urbp = urb->hcpriv;
+	urb->hcpriv = NULL;
+	list_del(&urbp->hep_node);
+	kfree(urbp);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static struct c67x00_ep_data *
+c67x00_ep_data_alloc(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+	struct usb_host_endpoint *hep = urb->ep;
+	struct c67x00_ep_data *ep_data;
+	int type;
+
+	c67x00->current_frame = c67x00_get_current_frame_number(c67x00);
+
+	/* Check if endpoint already has a c67x00_ep_data struct allocated */
+	if (hep->hcpriv) {
+		ep_data = hep->hcpriv;
+		if (frame_after(c67x00->current_frame, ep_data->next_frame))
+			ep_data->next_frame =
+			    frame_add(c67x00->current_frame, 1);
+		return hep->hcpriv;
+	}
+
+	/* Allocate and initialize a new c67x00 endpoint data structure */
+	ep_data = kzalloc(sizeof(*ep_data), GFP_ATOMIC);
+	if (!ep_data)
+		return NULL;
+
+	INIT_LIST_HEAD(&ep_data->queue);
+	INIT_LIST_HEAD(&ep_data->node);
+	ep_data->hep = hep;
+
+	/* hold a reference to udev as long as this endpoint lives,
+	 * this is needed to possibly fix the data toggle */
+	ep_data->dev = usb_get_dev(urb->dev);
+	hep->hcpriv = ep_data;
+
+	/* For ISOC and INT endpoints, start ASAP: */
+	ep_data->next_frame = frame_add(c67x00->current_frame, 1);
+
+	/* Add the endpoint data to one of the pipe lists; must be added
+	   in order of endpoint address */
+	type = usb_pipetype(urb->pipe);
+	if (list_empty(&ep_data->node)) {
+		list_add(&ep_data->node, &c67x00->list[type]);
+	} else {
+		struct c67x00_ep_data *prev;
+
+		list_for_each_entry(prev, &c67x00->list[type], node) {
+			if (prev->hep->desc.bEndpointAddress >
+			    hep->desc.bEndpointAddress) {
+				list_add(&ep_data->node, prev->node.prev);
+				break;
+			}
+		}
+	}
+
+	return ep_data;
+}
+
+static int c67x00_ep_data_free(struct usb_host_endpoint *hep)
+{
+	struct c67x00_ep_data *ep_data = hep->hcpriv;
+
+	if (!ep_data)
+		return 0;
+
+	if (!list_empty(&ep_data->queue))
+		return -EBUSY;
+
+	usb_put_dev(ep_data->dev);
+	list_del(&ep_data->queue);
+	list_del(&ep_data->node);
+
+	kfree(ep_data);
+	hep->hcpriv = NULL;
+
+	return 0;
+}
+
+void c67x00_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+	struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+	unsigned long flags;
+
+	if (!list_empty(&ep->urb_list))
+		dev_warn(c67x00_hcd_dev(c67x00), "error: urb list not empty\n");
+
+	spin_lock_irqsave(&c67x00->lock, flags);
+
+	/* loop waiting for all transfers in the endpoint queue to complete */
+	while (c67x00_ep_data_free(ep)) {
+		/* Drop the lock so we can sleep waiting for the hardware */
+		spin_unlock_irqrestore(&c67x00->lock, flags);
+
+		/* it could happen that we reinitialize this completion, while
+		 * somebody was waiting for that completion.  The timeout and
+		 * while loop handle such cases, but this might be improved */
+		reinit_completion(&c67x00->endpoint_disable);
+		c67x00_sched_kick(c67x00);
+		wait_for_completion_timeout(&c67x00->endpoint_disable, 1 * HZ);
+
+		spin_lock_irqsave(&c67x00->lock, flags);
+	}
+
+	spin_unlock_irqrestore(&c67x00->lock, flags);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static inline int get_root_port(struct usb_device *dev)
+{
+	while (dev->parent->parent)
+		dev = dev->parent;
+	return dev->portnum;
+}
+
+int c67x00_urb_enqueue(struct usb_hcd *hcd,
+		       struct urb *urb, gfp_t mem_flags)
+{
+	int ret;
+	unsigned long flags;
+	struct c67x00_urb_priv *urbp;
+	struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+	int port = get_root_port(urb->dev)-1;
+
+	/* Allocate and initialize urb private data */
+	urbp = kzalloc(sizeof(*urbp), mem_flags);
+	if (!urbp) {
+		ret = -ENOMEM;
+		goto err_urbp;
+	}
+
+	spin_lock_irqsave(&c67x00->lock, flags);
+
+	/* Make sure host controller is running */
+	if (!HC_IS_RUNNING(hcd->state)) {
+		ret = -ENODEV;
+		goto err_not_linked;
+	}
+
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (ret)
+		goto err_not_linked;
+
+	INIT_LIST_HEAD(&urbp->hep_node);
+	urbp->urb = urb;
+	urbp->port = port;
+
+	urbp->ep_data = c67x00_ep_data_alloc(c67x00, urb);
+
+	if (!urbp->ep_data) {
+		ret = -ENOMEM;
+		goto err_epdata;
+	}
+
+	/* TODO claim bandwidth with usb_claim_bandwidth?
+	 * also release it somewhere! */
+
+	urb->hcpriv = urbp;
+
+	urb->actual_length = 0;	/* Nothing received/transmitted yet */
+
+	switch (usb_pipetype(urb->pipe)) {
+	case PIPE_CONTROL:
+		urb->interval = SETUP_STAGE;
+		break;
+	case PIPE_INTERRUPT:
+		break;
+	case PIPE_BULK:
+		break;
+	case PIPE_ISOCHRONOUS:
+		if (c67x00->urb_iso_count == 0)
+			c67x00->max_frame_bw = MAX_FRAME_BW_ISO;
+		c67x00->urb_iso_count++;
+		/* Assume always URB_ISO_ASAP, FIXME */
+		if (list_empty(&urbp->ep_data->queue))
+			urb->start_frame = urbp->ep_data->next_frame;
+		else {
+			/* Go right after the last one */
+			struct urb *last_urb;
+
+			last_urb = list_entry(urbp->ep_data->queue.prev,
+					      struct c67x00_urb_priv,
+					      hep_node)->urb;
+			urb->start_frame =
+			    frame_add(last_urb->start_frame,
+				      last_urb->number_of_packets *
+				      last_urb->interval);
+		}
+		urbp->cnt = 0;
+		break;
+	}
+
+	/* Add the URB to the endpoint queue */
+	list_add_tail(&urbp->hep_node, &urbp->ep_data->queue);
+
+	/* If this is the only URB, kick start the controller */
+	if (!c67x00->urb_count++)
+		c67x00_ll_hpi_enable_sofeop(c67x00->sie);
+
+	c67x00_sched_kick(c67x00);
+	spin_unlock_irqrestore(&c67x00->lock, flags);
+
+	return 0;
+
+err_epdata:
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+err_not_linked:
+	spin_unlock_irqrestore(&c67x00->lock, flags);
+	kfree(urbp);
+err_urbp:
+
+	return ret;
+}
+
+int c67x00_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+	unsigned long flags;
+	int rc;
+
+	spin_lock_irqsave(&c67x00->lock, flags);
+	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (rc)
+		goto done;
+
+	c67x00_release_urb(c67x00, urb);
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+
+	spin_unlock(&c67x00->lock);
+	usb_hcd_giveback_urb(hcd, urb, status);
+	spin_lock(&c67x00->lock);
+
+	spin_unlock_irqrestore(&c67x00->lock, flags);
+
+	return 0;
+
+ done:
+	spin_unlock_irqrestore(&c67x00->lock, flags);
+	return rc;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * pre: c67x00 locked, urb unlocked
+ */
+static void
+c67x00_giveback_urb(struct c67x00_hcd *c67x00, struct urb *urb, int status)
+{
+	struct c67x00_urb_priv *urbp;
+
+	if (!urb)
+		return;
+
+	urbp = urb->hcpriv;
+	urbp->status = status;
+
+	list_del_init(&urbp->hep_node);
+
+	c67x00_release_urb(c67x00, urb);
+	usb_hcd_unlink_urb_from_ep(c67x00_hcd_to_hcd(c67x00), urb);
+	spin_unlock(&c67x00->lock);
+	usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, status);
+	spin_lock(&c67x00->lock);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int c67x00_claim_frame_bw(struct c67x00_hcd *c67x00, struct urb *urb,
+				 int len, int periodic)
+{
+	struct c67x00_urb_priv *urbp = urb->hcpriv;
+	int bit_time;
+
+	/* According to the C67x00 BIOS user manual, page 3-18,19, the
+	 * following calculations provide the full speed bit times for
+	 * a transaction.
+	 *
+	 * FS(in)	= 112.5 +  9.36*BC + HOST_DELAY
+	 * FS(in,iso)	=  90.5 +  9.36*BC + HOST_DELAY
+	 * FS(out)	= 112.5 +  9.36*BC + HOST_DELAY
+	 * FS(out,iso)	=  78.4 +  9.36*BC + HOST_DELAY
+	 * LS(in)	= 802.4 + 75.78*BC + HOST_DELAY
+	 * LS(out)	= 802.6 + 74.67*BC + HOST_DELAY
+	 *
+	 * HOST_DELAY == 106 for the c67200 and c67300.
+	 */
+
+	/* make calculations in 1/100 bit times to maintain resolution */
+	if (urbp->ep_data->dev->speed == USB_SPEED_LOW) {
+		/* Low speed pipe */
+		if (usb_pipein(urb->pipe))
+			bit_time = 80240 + 7578*len;
+		else
+			bit_time = 80260 + 7467*len;
+	} else {
+		/* FS pipes */
+		if (usb_pipeisoc(urb->pipe))
+			bit_time = usb_pipein(urb->pipe) ? 9050 : 7840;
+		else
+			bit_time = 11250;
+		bit_time += 936*len;
+	}
+
+	/* Scale back down to integer bit times.  Use a host delay of 106.
+	 * (this is the only place it is used) */
+	bit_time = ((bit_time+50) / 100) + 106;
+
+	if (unlikely(bit_time + c67x00->bandwidth_allocated >=
+		     c67x00->max_frame_bw))
+		return -EMSGSIZE;
+
+	if (unlikely(c67x00->next_td_addr + CY_TD_SIZE >=
+		     c67x00->td_base_addr + SIE_TD_SIZE))
+		return -EMSGSIZE;
+
+	if (unlikely(c67x00->next_buf_addr + len >=
+		     c67x00->buf_base_addr + SIE_TD_BUF_SIZE))
+		return -EMSGSIZE;
+
+	if (periodic) {
+		if (unlikely(bit_time + c67x00->periodic_bw_allocated >=
+			     MAX_PERIODIC_BW(c67x00->max_frame_bw)))
+			return -EMSGSIZE;
+		c67x00->periodic_bw_allocated += bit_time;
+	}
+
+	c67x00->bandwidth_allocated += bit_time;
+	return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * td_addr and buf_addr must be word aligned
+ */
+static int c67x00_create_td(struct c67x00_hcd *c67x00, struct urb *urb,
+			    void *data, int len, int pid, int toggle,
+			    unsigned long privdata)
+{
+	struct c67x00_td *td;
+	struct c67x00_urb_priv *urbp = urb->hcpriv;
+	const __u8 active_flag = 1, retry_cnt = 3;
+	__u8 cmd = 0;
+	int tt = 0;
+
+	if (c67x00_claim_frame_bw(c67x00, urb, len, usb_pipeisoc(urb->pipe)
+				  || usb_pipeint(urb->pipe)))
+		return -EMSGSIZE;	/* Not really an error, but expected */
+
+	td = kzalloc(sizeof(*td), GFP_ATOMIC);
+	if (!td)
+		return -ENOMEM;
+
+	td->pipe = urb->pipe;
+	td->ep_data = urbp->ep_data;
+
+	if ((td_udev(td)->speed == USB_SPEED_LOW) &&
+	    !(c67x00->low_speed_ports & (1 << urbp->port)))
+		cmd |= PREAMBLE_EN;
+
+	switch (usb_pipetype(td->pipe)) {
+	case PIPE_ISOCHRONOUS:
+		tt = TT_ISOCHRONOUS;
+		cmd |= ISO_EN;
+		break;
+	case PIPE_CONTROL:
+		tt = TT_CONTROL;
+		break;
+	case PIPE_BULK:
+		tt = TT_BULK;
+		break;
+	case PIPE_INTERRUPT:
+		tt = TT_INTERRUPT;
+		break;
+	}
+
+	if (toggle)
+		cmd |= SEQ_SEL;
+
+	cmd |= ARM_EN;
+
+	/* SW part */
+	td->td_addr = c67x00->next_td_addr;
+	c67x00->next_td_addr = c67x00->next_td_addr + CY_TD_SIZE;
+
+	/* HW part */
+	td->ly_base_addr = __cpu_to_le16(c67x00->next_buf_addr);
+	td->port_length = __cpu_to_le16((c67x00->sie->sie_num << 15) |
+					(urbp->port << 14) | (len & 0x3FF));
+	td->pid_ep = ((pid & 0xF) << TD_PIDEP_OFFSET) |
+	    (usb_pipeendpoint(td->pipe) & 0xF);
+	td->dev_addr = usb_pipedevice(td->pipe) & 0x7F;
+	td->ctrl_reg = cmd;
+	td->status = 0;
+	td->retry_cnt = (tt << TT_OFFSET) | (active_flag << 4) | retry_cnt;
+	td->residue = 0;
+	td->next_td_addr = __cpu_to_le16(c67x00->next_td_addr);
+
+	/* SW part */
+	td->data = data;
+	td->urb = urb;
+	td->privdata = privdata;
+
+	c67x00->next_buf_addr += (len + 1) & ~0x01;	/* properly align */
+
+	list_add_tail(&td->td_list, &c67x00->td_list);
+	return 0;
+}
+
+static inline void c67x00_release_td(struct c67x00_td *td)
+{
+	list_del_init(&td->td_list);
+	kfree(td);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int c67x00_add_data_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+	int remaining;
+	int toggle;
+	int pid;
+	int ret = 0;
+	int maxps;
+	int need_empty;
+
+	toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+			       usb_pipeout(urb->pipe));
+	remaining = urb->transfer_buffer_length - urb->actual_length;
+
+	maxps = usb_maxpacket(urb->dev, urb->pipe);
+
+	need_empty = (urb->transfer_flags & URB_ZERO_PACKET) &&
+	    usb_pipeout(urb->pipe) && !(remaining % maxps);
+
+	while (remaining || need_empty) {
+		int len;
+		char *td_buf;
+
+		len = (remaining > maxps) ? maxps : remaining;
+		if (!len)
+			need_empty = 0;
+
+		pid = usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN;
+		td_buf = urb->transfer_buffer + urb->transfer_buffer_length -
+		    remaining;
+		ret = c67x00_create_td(c67x00, urb, td_buf, len, pid, toggle,
+				       DATA_STAGE);
+		if (ret)
+			return ret;	/* td wasn't created */
+
+		toggle ^= 1;
+		remaining -= len;
+		if (usb_pipecontrol(urb->pipe))
+			break;
+	}
+
+	return 0;
+}
+
+/*
+ * return 0 in case more bandwidth is available, else errorcode
+ */
+static int c67x00_add_ctrl_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+	int ret;
+	int pid;
+
+	switch (urb->interval) {
+	default:
+	case SETUP_STAGE:
+		ret = c67x00_create_td(c67x00, urb, urb->setup_packet,
+				       8, USB_PID_SETUP, 0, SETUP_STAGE);
+		if (ret)
+			return ret;
+		urb->interval = SETUP_STAGE;
+		usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+			      usb_pipeout(urb->pipe), 1);
+		break;
+	case DATA_STAGE:
+		if (urb->transfer_buffer_length) {
+			ret = c67x00_add_data_urb(c67x00, urb);
+			if (ret)
+				return ret;
+			break;
+		}
+		fallthrough;
+	case STATUS_STAGE:
+		pid = !usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN;
+		ret = c67x00_create_td(c67x00, urb, NULL, 0, pid, 1,
+				       STATUS_STAGE);
+		if (ret)
+			return ret;
+		break;
+	}
+
+	return 0;
+}
+
+/*
+ * return 0 in case more bandwidth is available, else errorcode
+ */
+static int c67x00_add_int_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+	struct c67x00_urb_priv *urbp = urb->hcpriv;
+
+	if (frame_after_eq(c67x00->current_frame, urbp->ep_data->next_frame)) {
+		urbp->ep_data->next_frame =
+		    frame_add(urbp->ep_data->next_frame, urb->interval);
+		return c67x00_add_data_urb(c67x00, urb);
+	}
+	return 0;
+}
+
+static int c67x00_add_iso_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+	struct c67x00_urb_priv *urbp = urb->hcpriv;
+
+	if (frame_after_eq(c67x00->current_frame, urbp->ep_data->next_frame)) {
+		char *td_buf;
+		int len, pid, ret;
+
+		BUG_ON(urbp->cnt >= urb->number_of_packets);
+
+		td_buf = urb->transfer_buffer +
+		    urb->iso_frame_desc[urbp->cnt].offset;
+		len = urb->iso_frame_desc[urbp->cnt].length;
+		pid = usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN;
+
+		ret = c67x00_create_td(c67x00, urb, td_buf, len, pid, 0,
+				       urbp->cnt);
+		if (ret) {
+			dev_dbg(c67x00_hcd_dev(c67x00), "create failed: %d\n",
+				ret);
+			urb->iso_frame_desc[urbp->cnt].actual_length = 0;
+			urb->iso_frame_desc[urbp->cnt].status = ret;
+			if (urbp->cnt + 1 == urb->number_of_packets)
+				c67x00_giveback_urb(c67x00, urb, 0);
+		}
+
+		urbp->ep_data->next_frame =
+		    frame_add(urbp->ep_data->next_frame, urb->interval);
+		urbp->cnt++;
+	}
+	return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+static void c67x00_fill_from_list(struct c67x00_hcd *c67x00, int type,
+				  int (*add)(struct c67x00_hcd *, struct urb *))
+{
+	struct c67x00_ep_data *ep_data;
+	struct urb *urb;
+
+	/* traverse every endpoint on the list */
+	list_for_each_entry(ep_data, &c67x00->list[type], node) {
+		if (!list_empty(&ep_data->queue)) {
+			/* and add the first urb */
+			/* isochronous transfer rely on this */
+			urb = list_entry(ep_data->queue.next,
+					 struct c67x00_urb_priv,
+					 hep_node)->urb;
+			add(c67x00, urb);
+		}
+	}
+}
+
+static void c67x00_fill_frame(struct c67x00_hcd *c67x00)
+{
+	struct c67x00_td *td, *ttd;
+
+	/* Check if we can proceed */
+	if (!list_empty(&c67x00->td_list)) {
+		dev_warn(c67x00_hcd_dev(c67x00),
+			 "TD list not empty! This should not happen!\n");
+		list_for_each_entry_safe(td, ttd, &c67x00->td_list, td_list) {
+			dbg_td(c67x00, td, "Unprocessed td");
+			c67x00_release_td(td);
+		}
+	}
+
+	/* Reinitialize variables */
+	c67x00->bandwidth_allocated = 0;
+	c67x00->periodic_bw_allocated = 0;
+
+	c67x00->next_td_addr = c67x00->td_base_addr;
+	c67x00->next_buf_addr = c67x00->buf_base_addr;
+
+	/* Fill the list */
+	c67x00_fill_from_list(c67x00, PIPE_ISOCHRONOUS, c67x00_add_iso_urb);
+	c67x00_fill_from_list(c67x00, PIPE_INTERRUPT, c67x00_add_int_urb);
+	c67x00_fill_from_list(c67x00, PIPE_CONTROL, c67x00_add_ctrl_urb);
+	c67x00_fill_from_list(c67x00, PIPE_BULK, c67x00_add_data_urb);
+}
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * Get TD from C67X00
+ */
+static inline void
+c67x00_parse_td(struct c67x00_hcd *c67x00, struct c67x00_td *td)
+{
+	c67x00_ll_read_mem_le16(c67x00->sie->dev,
+				td->td_addr, td, CY_TD_SIZE);
+
+	if (usb_pipein(td->pipe) && td_actual_bytes(td))
+		c67x00_ll_read_mem_le16(c67x00->sie->dev, td_ly_base_addr(td),
+					td->data, td_actual_bytes(td));
+}
+
+static int c67x00_td_to_error(struct c67x00_hcd *c67x00, struct c67x00_td *td)
+{
+	if (td->status & TD_STATUSMASK_ERR) {
+		dbg_td(c67x00, td, "ERROR_FLAG");
+		return -EILSEQ;
+	}
+	if (td->status & TD_STATUSMASK_STALL) {
+		/* dbg_td(c67x00, td, "STALL"); */
+		return -EPIPE;
+	}
+	if (td->status & TD_STATUSMASK_TMOUT) {
+		dbg_td(c67x00, td, "TIMEOUT");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static inline int c67x00_end_of_data(struct c67x00_td *td)
+{
+	int maxps, need_empty, remaining;
+	struct urb *urb = td->urb;
+	int act_bytes;
+
+	act_bytes = td_actual_bytes(td);
+
+	if (unlikely(!act_bytes))
+		return 1;	/* This was an empty packet */
+
+	maxps = usb_maxpacket(td_udev(td), td->pipe);
+
+	if (unlikely(act_bytes < maxps))
+		return 1;	/* Smaller then full packet */
+
+	remaining = urb->transfer_buffer_length - urb->actual_length;
+	need_empty = (urb->transfer_flags & URB_ZERO_PACKET) &&
+	    usb_pipeout(urb->pipe) && !(remaining % maxps);
+
+	if (unlikely(!remaining && !need_empty))
+		return 1;
+
+	return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/* Remove all td's from the list which come
+ * after last_td and are meant for the same pipe.
+ * This is used when a short packet has occurred */
+static inline void c67x00_clear_pipe(struct c67x00_hcd *c67x00,
+				     struct c67x00_td *last_td)
+{
+	struct c67x00_td *td, *tmp;
+	td = last_td;
+	tmp = last_td;
+	while (td->td_list.next != &c67x00->td_list) {
+		td = list_entry(td->td_list.next, struct c67x00_td, td_list);
+		if (td->pipe == last_td->pipe) {
+			c67x00_release_td(td);
+			td = tmp;
+		}
+		tmp = td;
+	}
+}
+
+/* -------------------------------------------------------------------------- */
+
+static void c67x00_handle_successful_td(struct c67x00_hcd *c67x00,
+					struct c67x00_td *td)
+{
+	struct urb *urb = td->urb;
+
+	if (!urb)
+		return;
+
+	urb->actual_length += td_actual_bytes(td);
+
+	switch (usb_pipetype(td->pipe)) {
+		/* isochronous tds are handled separately */
+	case PIPE_CONTROL:
+		switch (td->privdata) {
+		case SETUP_STAGE:
+			urb->interval =
+			    urb->transfer_buffer_length ?
+			    DATA_STAGE : STATUS_STAGE;
+			/* Don't count setup_packet with normal data: */
+			urb->actual_length = 0;
+			break;
+
+		case DATA_STAGE:
+			if (c67x00_end_of_data(td)) {
+				urb->interval = STATUS_STAGE;
+				c67x00_clear_pipe(c67x00, td);
+			}
+			break;
+
+		case STATUS_STAGE:
+			urb->interval = 0;
+			c67x00_giveback_urb(c67x00, urb, 0);
+			break;
+		}
+		break;
+
+	case PIPE_INTERRUPT:
+	case PIPE_BULK:
+		if (unlikely(c67x00_end_of_data(td))) {
+			c67x00_clear_pipe(c67x00, td);
+			c67x00_giveback_urb(c67x00, urb, 0);
+		}
+		break;
+	}
+}
+
+static void c67x00_handle_isoc(struct c67x00_hcd *c67x00, struct c67x00_td *td)
+{
+	struct urb *urb = td->urb;
+	int cnt;
+
+	if (!urb)
+		return;
+
+	cnt = td->privdata;
+
+	if (td->status & TD_ERROR_MASK)
+		urb->error_count++;
+
+	urb->iso_frame_desc[cnt].actual_length = td_actual_bytes(td);
+	urb->iso_frame_desc[cnt].status = c67x00_td_to_error(c67x00, td);
+	if (cnt + 1 == urb->number_of_packets)	/* Last packet */
+		c67x00_giveback_urb(c67x00, urb, 0);
+}
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * c67x00_check_td_list - handle tds which have been processed by the c67x00
+ * pre: current_td == 0
+ */
+static inline void c67x00_check_td_list(struct c67x00_hcd *c67x00)
+{
+	struct c67x00_td *td, *tmp;
+	struct urb *urb;
+	int ack_ok;
+	int clear_endpoint;
+
+	list_for_each_entry_safe(td, tmp, &c67x00->td_list, td_list) {
+		/* get the TD */
+		c67x00_parse_td(c67x00, td);
+		urb = td->urb;	/* urb can be NULL! */
+		ack_ok = 0;
+		clear_endpoint = 1;
+
+		/* Handle isochronous transfers separately */
+		if (usb_pipeisoc(td->pipe)) {
+			clear_endpoint = 0;
+			c67x00_handle_isoc(c67x00, td);
+			goto cont;
+		}
+
+		/* When an error occurs, all td's for that pipe go into an
+		 * inactive state. This state matches successful transfers so
+		 * we must make sure not to service them. */
+		if (td->status & TD_ERROR_MASK) {
+			c67x00_giveback_urb(c67x00, urb,
+					    c67x00_td_to_error(c67x00, td));
+			goto cont;
+		}
+
+		if ((td->status & TD_STATUSMASK_NAK) || !td_sequence_ok(td) ||
+		    !td_acked(td))
+			goto cont;
+
+		/* Sequence ok and acked, don't need to fix toggle */
+		ack_ok = 1;
+
+		if (unlikely(td->status & TD_STATUSMASK_OVF)) {
+			if (td_residue(td) & TD_RESIDUE_OVERFLOW) {
+				/* Overflow */
+				c67x00_giveback_urb(c67x00, urb, -EOVERFLOW);
+				goto cont;
+			}
+		}
+
+		clear_endpoint = 0;
+		c67x00_handle_successful_td(c67x00, td);
+
+cont:
+		if (clear_endpoint)
+			c67x00_clear_pipe(c67x00, td);
+		if (ack_ok)
+			usb_settoggle(td_udev(td), usb_pipeendpoint(td->pipe),
+				      usb_pipeout(td->pipe),
+				      !(td->ctrl_reg & SEQ_SEL));
+		/* next in list could have been removed, due to clear_pipe! */
+		tmp = list_entry(td->td_list.next, typeof(*td), td_list);
+		c67x00_release_td(td);
+	}
+}
+
+/* -------------------------------------------------------------------------- */
+
+static inline int c67x00_all_tds_processed(struct c67x00_hcd *c67x00)
+{
+	/* If all tds are processed, we can check the previous frame (if
+	 * there was any) and start our next frame.
+	 */
+	return !c67x00_ll_husb_get_current_td(c67x00->sie);
+}
+
+/*
+ * Send td to C67X00
+ */
+static void c67x00_send_td(struct c67x00_hcd *c67x00, struct c67x00_td *td)
+{
+	int len = td_length(td);
+
+	if (len && ((td->pid_ep & TD_PIDEPMASK_PID) != TD_PID_IN))
+		c67x00_ll_write_mem_le16(c67x00->sie->dev, td_ly_base_addr(td),
+					 td->data, len);
+
+	c67x00_ll_write_mem_le16(c67x00->sie->dev,
+				 td->td_addr, td, CY_TD_SIZE);
+}
+
+static void c67x00_send_frame(struct c67x00_hcd *c67x00)
+{
+	struct c67x00_td *td;
+
+	if (list_empty(&c67x00->td_list))
+		dev_warn(c67x00_hcd_dev(c67x00),
+			 "%s: td list should not be empty here!\n",
+			 __func__);
+
+	list_for_each_entry(td, &c67x00->td_list, td_list) {
+		if (td->td_list.next == &c67x00->td_list)
+			td->next_td_addr = 0;	/* Last td in list */
+
+		c67x00_send_td(c67x00, td);
+	}
+
+	c67x00_ll_husb_set_current_td(c67x00->sie, c67x00->td_base_addr);
+}
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * c67x00_do_work - Schedulers state machine
+ */
+static void c67x00_do_work(struct c67x00_hcd *c67x00)
+{
+	spin_lock(&c67x00->lock);
+	/* Make sure all tds are processed */
+	if (!c67x00_all_tds_processed(c67x00))
+		goto out;
+
+	c67x00_check_td_list(c67x00);
+
+	/* no td's are being processed (current == 0)
+	 * and all have been "checked" */
+	complete(&c67x00->endpoint_disable);
+
+	if (!list_empty(&c67x00->td_list))
+		goto out;
+
+	c67x00->current_frame = c67x00_get_current_frame_number(c67x00);
+	if (c67x00->current_frame == c67x00->last_frame)
+		goto out;	/* Don't send tds in same frame */
+	c67x00->last_frame = c67x00->current_frame;
+
+	/* If no urbs are scheduled, our work is done */
+	if (!c67x00->urb_count) {
+		c67x00_ll_hpi_disable_sofeop(c67x00->sie);
+		goto out;
+	}
+
+	c67x00_fill_frame(c67x00);
+	if (!list_empty(&c67x00->td_list))
+		/* TD's have been added to the frame */
+		c67x00_send_frame(c67x00);
+
+ out:
+	spin_unlock(&c67x00->lock);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static void c67x00_sched_work(struct work_struct *work)
+{
+	struct c67x00_hcd *c67x00;
+
+	c67x00 = container_of(work, struct c67x00_hcd, work);
+	c67x00_do_work(c67x00);
+}
+
+void c67x00_sched_kick(struct c67x00_hcd *c67x00)
+{
+	queue_work(system_highpri_wq, &c67x00->work);
+}
+
+int c67x00_sched_start_scheduler(struct c67x00_hcd *c67x00)
+{
+	INIT_WORK(&c67x00->work, c67x00_sched_work);
+	return 0;
+}
+
+void c67x00_sched_stop_scheduler(struct c67x00_hcd *c67x00)
+{
+	cancel_work_sync(&c67x00->work);
+}
diff --git a/drivers/usb/c67x00/c67x00.h b/drivers/usb/c67x00/c67x00.h
new file mode 100644
index 000000000..a4456d0ff
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00.h
@@ -0,0 +1,280 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * c67x00.h: Cypress C67X00 USB register and field definitions
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ *    based on multiple host controller drivers inside the linux kernel.
+ */
+
+#ifndef _USB_C67X00_H
+#define _USB_C67X00_H
+
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+
+/* ---------------------------------------------------------------------
+ * Cypress C67x00 register definitions
+ */
+
+/* Hardware Revision Register */
+#define HW_REV_REG		0xC004
+
+/* General USB registers */
+/* ===================== */
+
+/* USB Control Register */
+#define USB_CTL_REG(x)		((x) ? 0xC0AA : 0xC08A)
+
+#define LOW_SPEED_PORT(x)	((x) ? 0x0800 : 0x0400)
+#define HOST_MODE		0x0200
+#define PORT_RES_EN(x)		((x) ? 0x0100 : 0x0080)
+#define SOF_EOP_EN(x)		((x) ? 0x0002 : 0x0001)
+
+/* USB status register - Notice it has different content in hcd/udc mode */
+#define USB_STAT_REG(x)		((x) ? 0xC0B0 : 0xC090)
+
+#define EP0_IRQ_FLG		0x0001
+#define EP1_IRQ_FLG		0x0002
+#define EP2_IRQ_FLG		0x0004
+#define EP3_IRQ_FLG		0x0008
+#define EP4_IRQ_FLG		0x0010
+#define EP5_IRQ_FLG		0x0020
+#define EP6_IRQ_FLG		0x0040
+#define EP7_IRQ_FLG		0x0080
+#define RESET_IRQ_FLG		0x0100
+#define SOF_EOP_IRQ_FLG		0x0200
+#define ID_IRQ_FLG		0x4000
+#define VBUS_IRQ_FLG		0x8000
+
+/* USB Host only registers */
+/* ======================= */
+
+/* Host n Control Register */
+#define HOST_CTL_REG(x)		((x) ? 0xC0A0 : 0xC080)
+
+#define PREAMBLE_EN		0x0080	/* Preamble enable */
+#define SEQ_SEL			0x0040	/* Data Toggle Sequence Bit Select */
+#define ISO_EN			0x0010	/* Isochronous enable  */
+#define ARM_EN			0x0001	/* Arm operation */
+
+/* Host n Interrupt Enable Register */
+#define HOST_IRQ_EN_REG(x)	((x) ? 0xC0AC : 0xC08C)
+
+#define SOF_EOP_IRQ_EN		0x0200	/* SOF/EOP Interrupt Enable  */
+#define SOF_EOP_TMOUT_IRQ_EN	0x0800	/* SOF/EOP Timeout Interrupt Enable  */
+#define ID_IRQ_EN		0x4000	/* ID interrupt enable */
+#define VBUS_IRQ_EN		0x8000	/* VBUS interrupt enable */
+#define DONE_IRQ_EN		0x0001	/* Done Interrupt Enable  */
+
+/* USB status register */
+#define HOST_STAT_MASK		0x02FD
+#define PORT_CONNECT_CHANGE(x)	((x) ? 0x0020 : 0x0010)
+#define PORT_SE0_STATUS(x)	((x) ? 0x0008 : 0x0004)
+
+/* Host Frame Register */
+#define HOST_FRAME_REG(x)	((x) ? 0xC0B6 : 0xC096)
+
+#define HOST_FRAME_MASK		0x07FF
+
+/* USB Peripheral only registers */
+/* ============================= */
+
+/* Device n Port Sel reg */
+#define DEVICE_N_PORT_SEL(x)	((x) ? 0xC0A4 : 0xC084)
+
+/* Device n Interrupt Enable Register */
+#define DEVICE_N_IRQ_EN_REG(x)	((x) ? 0xC0AC : 0xC08C)
+
+#define DEVICE_N_ENDPOINT_N_CTL_REG(dev, ep)	((dev)  		\
+						 ? (0x0280 + (ep << 4)) \
+						 : (0x0200 + (ep << 4)))
+#define DEVICE_N_ENDPOINT_N_STAT_REG(dev, ep)	((dev)			\
+						 ? (0x0286 + (ep << 4)) \
+						 : (0x0206 + (ep << 4)))
+
+#define DEVICE_N_ADDRESS(dev)	((dev) ? (0xC0AE) : (0xC08E))
+
+/* HPI registers */
+/* ============= */
+
+/* HPI Status register */
+#define SOFEOP_FLG(x)		(1 << ((x) ? 12 : 10))
+#define SIEMSG_FLG(x)		(1 << (4 + (x)))
+#define RESET_FLG(x)		((x) ? 0x0200 : 0x0002)
+#define DONE_FLG(x)		(1 << (2 + (x)))
+#define RESUME_FLG(x)		(1 << (6 + (x)))
+#define MBX_OUT_FLG		0x0001	/* Message out available */
+#define MBX_IN_FLG		0x0100
+#define ID_FLG			0x4000
+#define VBUS_FLG		0x8000
+
+/* Interrupt routing register */
+#define HPI_IRQ_ROUTING_REG	0x0142
+
+#define HPI_SWAP_ENABLE(x)	((x) ? 0x0100 : 0x0001)
+#define RESET_TO_HPI_ENABLE(x)	((x) ? 0x0200 : 0x0002)
+#define DONE_TO_HPI_ENABLE(x)	((x) ? 0x0008 : 0x0004)
+#define RESUME_TO_HPI_ENABLE(x)	((x) ? 0x0080 : 0x0040)
+#define SOFEOP_TO_HPI_EN(x)	((x) ? 0x2000 : 0x0800)
+#define SOFEOP_TO_CPU_EN(x)	((x) ? 0x1000 : 0x0400)
+#define ID_TO_HPI_ENABLE	0x4000
+#define VBUS_TO_HPI_ENABLE	0x8000
+
+/* SIE msg registers */
+#define SIEMSG_REG(x)		((x) ? 0x0148 : 0x0144)
+
+#define HUSB_TDListDone		0x1000
+
+#define SUSB_EP0_MSG		0x0001
+#define SUSB_EP1_MSG		0x0002
+#define SUSB_EP2_MSG		0x0004
+#define SUSB_EP3_MSG		0x0008
+#define SUSB_EP4_MSG		0x0010
+#define SUSB_EP5_MSG		0x0020
+#define SUSB_EP6_MSG		0x0040
+#define SUSB_EP7_MSG		0x0080
+#define SUSB_RST_MSG		0x0100
+#define SUSB_SOF_MSG		0x0200
+#define SUSB_CFG_MSG		0x0400
+#define SUSB_SUS_MSG		0x0800
+#define SUSB_ID_MSG	       	0x4000
+#define SUSB_VBUS_MSG		0x8000
+
+/* BIOS interrupt routines */
+
+#define SUSBx_RECEIVE_INT(x)	((x) ? 97 : 81)
+#define SUSBx_SEND_INT(x)	((x) ? 96 : 80)
+
+#define SUSBx_DEV_DESC_VEC(x)	((x) ? 0x00D4 : 0x00B4)
+#define SUSBx_CONF_DESC_VEC(x)	((x) ? 0x00D6 : 0x00B6)
+#define SUSBx_STRING_DESC_VEC(x) ((x) ? 0x00D8 : 0x00B8)
+
+#define CY_HCD_BUF_ADDR		0x500	/* Base address for host */
+#define SIE_TD_SIZE		0x200	/* size of the td list */
+#define SIE_TD_BUF_SIZE		0x400	/* size of the data buffer */
+
+#define SIE_TD_OFFSET(host)	((host) ? (SIE_TD_SIZE+SIE_TD_BUF_SIZE) : 0)
+#define SIE_BUF_OFFSET(host)	(SIE_TD_OFFSET(host) + SIE_TD_SIZE)
+
+/* Base address of HCD + 2 x TD_SIZE + 2 x TD_BUF_SIZE */
+#define CY_UDC_REQ_HEADER_BASE	0x1100
+/* 8- byte request headers for IN/OUT transfers */
+#define CY_UDC_REQ_HEADER_SIZE	8
+
+#define CY_UDC_REQ_HEADER_ADDR(ep_num)	(CY_UDC_REQ_HEADER_BASE + \
+					 ((ep_num) * CY_UDC_REQ_HEADER_SIZE))
+#define CY_UDC_DESC_BASE_ADDRESS	(CY_UDC_REQ_HEADER_ADDR(8))
+
+#define CY_UDC_BIOS_REPLACE_BASE	0x1800
+#define CY_UDC_REQ_BUFFER_BASE		0x2000
+#define CY_UDC_REQ_BUFFER_SIZE		0x0400
+#define CY_UDC_REQ_BUFFER_ADDR(ep_num)	(CY_UDC_REQ_BUFFER_BASE + \
+					 ((ep_num) * CY_UDC_REQ_BUFFER_SIZE))
+
+/* ---------------------------------------------------------------------
+ * Driver data structures
+ */
+
+struct c67x00_device;
+
+/**
+ * struct c67x00_sie - Common data associated with a SIE
+ * @lock: lock to protect this struct and the associated chip registers
+ * @private_data: subdriver dependent data
+ * @irq: subdriver dependent irq handler, set NULL when not used
+ * @dev: link to common driver structure
+ * @sie_num: SIE number on chip, starting from 0
+ * @mode: SIE mode (host/peripheral/otg/not used)
+ */
+struct c67x00_sie {
+	/* Entries to be used by the subdrivers */
+	spinlock_t lock;	/* protect this structure */
+	void *private_data;
+	void (*irq) (struct c67x00_sie *sie, u16 int_status, u16 msg);
+
+	/* Read only: */
+	struct c67x00_device *dev;
+	int sie_num;
+	int mode;
+};
+
+#define sie_dev(s)	(&(s)->dev->pdev->dev)
+
+/**
+ * struct c67x00_lcp
+ */
+struct c67x00_lcp {
+	/* Internal use only */
+	struct mutex mutex;
+	struct completion msg_received;
+	u16 last_msg;
+};
+
+/*
+ * struct c67x00_hpi
+ */
+struct c67x00_hpi {
+	void __iomem *base;
+	int regstep;
+	spinlock_t lock;
+	struct c67x00_lcp lcp;
+};
+
+#define C67X00_SIES	2
+#define C67X00_PORTS	2
+
+/**
+ * struct c67x00_device - Common data associated with a c67x00 instance
+ * @hpi: hpi addresses
+ * @sie: array of sie's on this chip
+ * @pdev: platform device of instance
+ * @pdata: configuration provided by the platform
+ */
+struct c67x00_device {
+	struct c67x00_hpi hpi;
+	struct c67x00_sie sie[C67X00_SIES];
+	struct platform_device *pdev;
+	struct c67x00_platform_data *pdata;
+};
+
+/* ---------------------------------------------------------------------
+ * Low level interface functions
+ */
+
+/* Host Port Interface (HPI) functions */
+u16 c67x00_ll_hpi_status(struct c67x00_device *dev);
+void c67x00_ll_hpi_reg_init(struct c67x00_device *dev);
+void c67x00_ll_hpi_enable_sofeop(struct c67x00_sie *sie);
+void c67x00_ll_hpi_disable_sofeop(struct c67x00_sie *sie);
+
+/* General functions */
+u16 c67x00_ll_fetch_siemsg(struct c67x00_device *dev, int sie_num);
+u16 c67x00_ll_get_usb_ctl(struct c67x00_sie *sie);
+void c67x00_ll_usb_clear_status(struct c67x00_sie *sie, u16 bits);
+u16 c67x00_ll_usb_get_status(struct c67x00_sie *sie);
+void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr,
+			      void *data, int len);
+void c67x00_ll_read_mem_le16(struct c67x00_device *dev, u16 addr,
+			     void *data, int len);
+
+/* Host specific functions */
+void c67x00_ll_set_husb_eot(struct c67x00_device *dev, u16 value);
+void c67x00_ll_husb_reset(struct c67x00_sie *sie, int port);
+void c67x00_ll_husb_set_current_td(struct c67x00_sie *sie, u16 addr);
+u16 c67x00_ll_husb_get_current_td(struct c67x00_sie *sie);
+u16 c67x00_ll_husb_get_frame(struct c67x00_sie *sie);
+void c67x00_ll_husb_init_host_port(struct c67x00_sie *sie);
+void c67x00_ll_husb_reset_port(struct c67x00_sie *sie, int port);
+
+/* Called by c67x00_irq to handle lcp interrupts */
+void c67x00_ll_irq(struct c67x00_device *dev, u16 int_status);
+
+/* Setup and teardown */
+void c67x00_ll_init(struct c67x00_device *dev);
+void c67x00_ll_release(struct c67x00_device *dev);
+int c67x00_ll_reset(struct c67x00_device *dev);
+
+#endif				/* _USB_C67X00_H */