Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 122 insertions, 0 deletions

diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
new file mode 100644
index 000000000..b98ca0a13
--- /dev/null
+++ b/drivers/usb/cdns3/Kconfig
@@ -0,0 +1,122 @@
+config USB_CDNS_SUPPORT
+	tristate "Cadence USB Support"
+	depends on USB_SUPPORT && (USB || USB_GADGET) && HAS_DMA
+	select USB_XHCI_PLATFORM if USB_XHCI_HCD
+	select USB_ROLE_SWITCH
+	help
+	  Say Y here if your system has a Cadence USBSS or USBSSP
+	  dual-role controller.
+	  It supports: dual-role switch, Host-only, and Peripheral-only.
+
+config USB_CDNS_HOST
+	bool
+
+if USB_CDNS_SUPPORT
+
+config USB_CDNS3
+	tristate "Cadence USB3 Dual-Role Controller"
+	depends on USB_CDNS_SUPPORT
+	help
+	  Say Y here if your system has a Cadence USB3 dual-role controller.
+	  It supports: dual-role switch, Host-only, and Peripheral-only.
+
+	  If you choose to build this driver is a dynamically linked
+	  as module, the module will be called cdns3.ko.
+endif
+
+if USB_CDNS3
+
+config USB_CDNS3_GADGET
+	bool "Cadence USB3 device controller"
+	depends on USB_GADGET=y || USB_GADGET=USB_CDNS3
+	help
+	  Say Y here to enable device controller functionality of the
+	  Cadence USBSS-DEV driver.
+
+	  This controller supports FF, HS and SS mode. It doesn't support
+	  LS and SSP mode.
+
+config USB_CDNS3_HOST
+	bool "Cadence USB3 host controller"
+	depends on USB=y || USB=USB_CDNS3
+	select USB_CDNS_HOST
+	help
+	  Say Y here to enable host controller functionality of the
+	  Cadence driver.
+
+	  Host controller is compliant with XHCI so it will use
+	  standard XHCI driver.
+
+config USB_CDNS3_PCI_WRAP
+	tristate "Cadence USB3 support on PCIe-based platforms"
+	depends on USB_PCI && ACPI
+	default USB_CDNS3
+	help
+	  If you're using the USBSS Core IP with a PCIe, please say
+	  'Y' or 'M' here.
+
+	  If you choose to build this driver as module it will
+	  be dynamically linked and module will be called cdns3-pci.ko
+
+config USB_CDNS3_TI
+	tristate "Cadence USB3 support on TI platforms"
+	depends on ARCH_K3 || COMPILE_TEST
+	default USB_CDNS3
+	help
+	  Say 'Y' or 'M' here if you are building for Texas Instruments
+	  platforms that contain Cadence USB3 controller core.
+
+	  e.g. J721e.
+
+config USB_CDNS3_IMX
+	tristate "Cadence USB3 support on NXP i.MX platforms"
+	depends on ARCH_MXC || COMPILE_TEST
+	default USB_CDNS3
+	help
+	  Say 'Y' or 'M' here if you are building for NXP i.MX
+	  platforms that contain Cadence USB3 controller core.
+
+	  For example, imx8qm and imx8qxp.
+
+endif
+
+if USB_CDNS_SUPPORT
+
+config USB_CDNSP_PCI
+	tristate "Cadence CDNSP Dual-Role Controller"
+	depends on USB_CDNS_SUPPORT && USB_PCI && ACPI
+	help
+	  Say Y here if your system has a Cadence CDNSP dual-role controller.
+	  It supports: dual-role switch Host-only, and Peripheral-only.
+
+	  If you choose to build this driver is a dynamically linked
+	  module, the module will be called cdnsp.ko.
+endif
+
+if USB_CDNSP_PCI
+
+config USB_CDNSP_GADGET
+	bool "Cadence CDNSP device controller"
+	depends on USB_GADGET=y || USB_GADGET=USB_CDNSP_PCI
+	help
+	  Say Y here to enable device controller functionality of the
+	  Cadence CDNSP-DEV driver.
+
+	  Cadence CDNSP Device Controller in device mode is
+	  very similar to XHCI controller. Therefore some algorithms
+	  used has been taken from host driver.
+	  This controller supports FF, HS, SS and SSP mode.
+	  It doesn't support LS.
+
+config USB_CDNSP_HOST
+	bool "Cadence CDNSP host controller"
+	depends on USB=y || USB=USB_CDNSP_PCI
+	select USB_CDNS_HOST
+	help
+	  Say Y here to enable host controller functionality of the
+	  Cadence driver.
+
+	  Host controller is compliant with XHCI so it uses
+	  standard XHCI driver.
+
+endif