Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

17 files changed, 5594 insertions, 0 deletions

diff --git a/include/xen/interface/io/9pfs.h b/include/xen/interface/io/9pfs.h
new file mode 100644
index 000000000..f1a4c5ad2
--- /dev/null
+++ b/include/xen/interface/io/9pfs.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * 9pfs.h -- Xen 9PFS transport
+ *
+ * Copyright (C) 2017 Stefano Stabellini <stefano@aporeto.com>
+ */
+
+#ifndef __XEN_PUBLIC_IO_9PFS_H__
+#define __XEN_PUBLIC_IO_9PFS_H__
+
+#include "xen/interface/io/ring.h"
+
+/*
+ * See docs/misc/9pfs.markdown in xen.git for the full specification:
+ * https://xenbits.xen.org/docs/unstable/misc/9pfs.html
+ */
+DEFINE_XEN_FLEX_RING_AND_INTF(xen_9pfs);
+
+#endif
diff --git a/include/xen/interface/io/blkif.h b/include/xen/interface/io/blkif.h
new file mode 100644
index 000000000..ba1e9f5b6
--- /dev/null
+++ b/include/xen/interface/io/blkif.h
@@ -0,0 +1,302 @@
+/* SPDX-License-Identifier: MIT */
+/******************************************************************************
+ * blkif.h
+ *
+ * Unified block-device I/O interface for Xen guest OSes.
+ *
+ * Copyright (c) 2003-2004, Keir Fraser
+ */
+
+#ifndef __XEN_PUBLIC_IO_BLKIF_H__
+#define __XEN_PUBLIC_IO_BLKIF_H__
+
+#include <xen/interface/io/ring.h>
+#include <xen/interface/grant_table.h>
+
+/*
+ * Front->back notifications: When enqueuing a new request, sending a
+ * notification can be made conditional on req_event (i.e., the generic
+ * hold-off mechanism provided by the ring macros). Backends must set
+ * req_event appropriately (e.g., using RING_FINAL_CHECK_FOR_REQUESTS()).
+ *
+ * Back->front notifications: When enqueuing a new response, sending a
+ * notification can be made conditional on rsp_event (i.e., the generic
+ * hold-off mechanism provided by the ring macros). Frontends must set
+ * rsp_event appropriately (e.g., using RING_FINAL_CHECK_FOR_RESPONSES()).
+ */
+
+typedef uint16_t blkif_vdev_t;
+typedef uint64_t blkif_sector_t;
+
+/*
+ * Multiple hardware queues/rings:
+ * If supported, the backend will write the key "multi-queue-max-queues" to
+ * the directory for that vbd, and set its value to the maximum supported
+ * number of queues.
+ * Frontends that are aware of this feature and wish to use it can write the
+ * key "multi-queue-num-queues" with the number they wish to use, which must be
+ * greater than zero, and no more than the value reported by the backend in
+ * "multi-queue-max-queues".
+ *
+ * For frontends requesting just one queue, the usual event-channel and
+ * ring-ref keys are written as before, simplifying the backend processing
+ * to avoid distinguishing between a frontend that doesn't understand the
+ * multi-queue feature, and one that does, but requested only one queue.
+ *
+ * Frontends requesting two or more queues must not write the toplevel
+ * event-channel and ring-ref keys, instead writing those keys under sub-keys
+ * having the name "queue-N" where N is the integer ID of the queue/ring for
+ * which those keys belong. Queues are indexed from zero.
+ * For example, a frontend with two queues must write the following set of
+ * queue-related keys:
+ *
+ * /local/domain/1/device/vbd/0/multi-queue-num-queues = "2"
+ * /local/domain/1/device/vbd/0/queue-0 = ""
+ * /local/domain/1/device/vbd/0/queue-0/ring-ref = "<ring-ref#0>"
+ * /local/domain/1/device/vbd/0/queue-0/event-channel = "<evtchn#0>"
+ * /local/domain/1/device/vbd/0/queue-1 = ""
+ * /local/domain/1/device/vbd/0/queue-1/ring-ref = "<ring-ref#1>"
+ * /local/domain/1/device/vbd/0/queue-1/event-channel = "<evtchn#1>"
+ *
+ * It is also possible to use multiple queues/rings together with
+ * feature multi-page ring buffer.
+ * For example, a frontend requests two queues/rings and the size of each ring
+ * buffer is two pages must write the following set of related keys:
+ *
+ * /local/domain/1/device/vbd/0/multi-queue-num-queues = "2"
+ * /local/domain/1/device/vbd/0/ring-page-order = "1"
+ * /local/domain/1/device/vbd/0/queue-0 = ""
+ * /local/domain/1/device/vbd/0/queue-0/ring-ref0 = "<ring-ref#0>"
+ * /local/domain/1/device/vbd/0/queue-0/ring-ref1 = "<ring-ref#1>"
+ * /local/domain/1/device/vbd/0/queue-0/event-channel = "<evtchn#0>"
+ * /local/domain/1/device/vbd/0/queue-1 = ""
+ * /local/domain/1/device/vbd/0/queue-1/ring-ref0 = "<ring-ref#2>"
+ * /local/domain/1/device/vbd/0/queue-1/ring-ref1 = "<ring-ref#3>"
+ * /local/domain/1/device/vbd/0/queue-1/event-channel = "<evtchn#1>"
+ *
+ */
+
+/*
+ * REQUEST CODES.
+ */
+#define BLKIF_OP_READ              0
+#define BLKIF_OP_WRITE             1
+/*
+ * Recognised only if "feature-barrier" is present in backend xenbus info.
+ * The "feature_barrier" node contains a boolean indicating whether barrier
+ * requests are likely to succeed or fail. Either way, a barrier request
+ * may fail at any time with BLKIF_RSP_EOPNOTSUPP if it is unsupported by
+ * the underlying block-device hardware. The boolean simply indicates whether
+ * or not it is worthwhile for the frontend to attempt barrier requests.
+ * If a backend does not recognise BLKIF_OP_WRITE_BARRIER, it should *not*
+ * create the "feature-barrier" node!
+ */
+#define BLKIF_OP_WRITE_BARRIER     2
+
+/*
+ * Recognised if "feature-flush-cache" is present in backend xenbus
+ * info.  A flush will ask the underlying storage hardware to flush its
+ * non-volatile caches as appropriate.  The "feature-flush-cache" node
+ * contains a boolean indicating whether flush requests are likely to
+ * succeed or fail. Either way, a flush request may fail at any time
+ * with BLKIF_RSP_EOPNOTSUPP if it is unsupported by the underlying
+ * block-device hardware. The boolean simply indicates whether or not it
+ * is worthwhile for the frontend to attempt flushes.  If a backend does
+ * not recognise BLKIF_OP_WRITE_FLUSH_CACHE, it should *not* create the
+ * "feature-flush-cache" node!
+ */
+#define BLKIF_OP_FLUSH_DISKCACHE   3
+
+/*
+ * Recognised only if "feature-discard" is present in backend xenbus info.
+ * The "feature-discard" node contains a boolean indicating whether trim
+ * (ATA) or unmap (SCSI) - conviently called discard requests are likely
+ * to succeed or fail. Either way, a discard request
+ * may fail at any time with BLKIF_RSP_EOPNOTSUPP if it is unsupported by
+ * the underlying block-device hardware. The boolean simply indicates whether
+ * or not it is worthwhile for the frontend to attempt discard requests.
+ * If a backend does not recognise BLKIF_OP_DISCARD, it should *not*
+ * create the "feature-discard" node!
+ *
+ * Discard operation is a request for the underlying block device to mark
+ * extents to be erased. However, discard does not guarantee that the blocks
+ * will be erased from the device - it is just a hint to the device
+ * controller that these blocks are no longer in use. What the device
+ * controller does with that information is left to the controller.
+ * Discard operations are passed with sector_number as the
+ * sector index to begin discard operations at and nr_sectors as the number of
+ * sectors to be discarded. The specified sectors should be discarded if the
+ * underlying block device supports trim (ATA) or unmap (SCSI) operations,
+ * or a BLKIF_RSP_EOPNOTSUPP  should be returned.
+ * More information about trim/unmap operations at:
+ * http://t13.org/Documents/UploadedDocuments/docs2008/
+ *     e07154r6-Data_Set_Management_Proposal_for_ATA-ACS2.doc
+ * http://www.seagate.com/staticfiles/support/disc/manuals/
+ *     Interface%20manuals/100293068c.pdf
+ * The backend can optionally provide three extra XenBus attributes to
+ * further optimize the discard functionality:
+ * 'discard-alignment' - Devices that support discard functionality may
+ * internally allocate space in units that are bigger than the exported
+ * logical block size. The discard-alignment parameter indicates how many bytes
+ * the beginning of the partition is offset from the internal allocation unit's
+ * natural alignment.
+ * 'discard-granularity'  - Devices that support discard functionality may
+ * internally allocate space using units that are bigger than the logical block
+ * size. The discard-granularity parameter indicates the size of the internal
+ * allocation unit in bytes if reported by the device. Otherwise the
+ * discard-granularity will be set to match the device's physical block size.
+ * 'discard-secure' - All copies of the discarded sectors (potentially created
+ * by garbage collection) must also be erased.  To use this feature, the flag
+ * BLKIF_DISCARD_SECURE must be set in the blkif_request_trim.
+ */
+#define BLKIF_OP_DISCARD           5
+
+/*
+ * Recognized if "feature-max-indirect-segments" in present in the backend
+ * xenbus info. The "feature-max-indirect-segments" node contains the maximum
+ * number of segments allowed by the backend per request. If the node is
+ * present, the frontend might use blkif_request_indirect structs in order to
+ * issue requests with more than BLKIF_MAX_SEGMENTS_PER_REQUEST (11). The
+ * maximum number of indirect segments is fixed by the backend, but the
+ * frontend can issue requests with any number of indirect segments as long as
+ * it's less than the number provided by the backend. The indirect_grefs field
+ * in blkif_request_indirect should be filled by the frontend with the
+ * grant references of the pages that are holding the indirect segments.
+ * These pages are filled with an array of blkif_request_segment that hold the
+ * information about the segments. The number of indirect pages to use is
+ * determined by the number of segments an indirect request contains. Every
+ * indirect page can contain a maximum of
+ * (PAGE_SIZE / sizeof(struct blkif_request_segment)) segments, so to
+ * calculate the number of indirect pages to use we have to do
+ * ceil(indirect_segments / (PAGE_SIZE / sizeof(struct blkif_request_segment))).
+ *
+ * If a backend does not recognize BLKIF_OP_INDIRECT, it should *not*
+ * create the "feature-max-indirect-segments" node!
+ */
+#define BLKIF_OP_INDIRECT          6
+
+/*
+ * Maximum scatter/gather segments per request.
+ * This is carefully chosen so that sizeof(struct blkif_ring) <= PAGE_SIZE.
+ * NB. This could be 12 if the ring indexes weren't stored in the same page.
+ */
+#define BLKIF_MAX_SEGMENTS_PER_REQUEST 11
+
+#define BLKIF_MAX_INDIRECT_PAGES_PER_REQUEST 8
+
+struct blkif_request_segment {
+		grant_ref_t gref;        /* reference to I/O buffer frame        */
+		/* @first_sect: first sector in frame to transfer (inclusive).   */
+		/* @last_sect: last sector in frame to transfer (inclusive).     */
+		uint8_t     first_sect, last_sect;
+};
+
+struct blkif_request_rw {
+	uint8_t        nr_segments;  /* number of segments                   */
+	blkif_vdev_t   handle;       /* only for read/write requests         */
+#ifndef CONFIG_X86_32
+	uint32_t       _pad1;	     /* offsetof(blkif_request,u.rw.id) == 8 */
+#endif
+	uint64_t       id;           /* private guest value, echoed in resp  */
+	blkif_sector_t sector_number;/* start sector idx on disk (r/w only)  */
+	struct blkif_request_segment seg[BLKIF_MAX_SEGMENTS_PER_REQUEST];
+} __attribute__((__packed__));
+
+struct blkif_request_discard {
+	uint8_t        flag;         /* BLKIF_DISCARD_SECURE or zero.        */
+#define BLKIF_DISCARD_SECURE (1<<0)  /* ignored if discard-secure=0          */
+	blkif_vdev_t   _pad1;        /* only for read/write requests         */
+#ifndef CONFIG_X86_32
+	uint32_t       _pad2;        /* offsetof(blkif_req..,u.discard.id)==8*/
+#endif
+	uint64_t       id;           /* private guest value, echoed in resp  */
+	blkif_sector_t sector_number;
+	uint64_t       nr_sectors;
+	uint8_t        _pad3;
+} __attribute__((__packed__));
+
+struct blkif_request_other {
+	uint8_t      _pad1;
+	blkif_vdev_t _pad2;        /* only for read/write requests         */
+#ifndef CONFIG_X86_32
+	uint32_t     _pad3;        /* offsetof(blkif_req..,u.other.id)==8*/
+#endif
+	uint64_t     id;           /* private guest value, echoed in resp  */
+} __attribute__((__packed__));
+
+struct blkif_request_indirect {
+	uint8_t        indirect_op;
+	uint16_t       nr_segments;
+#ifndef CONFIG_X86_32
+	uint32_t       _pad1;        /* offsetof(blkif_...,u.indirect.id) == 8 */
+#endif
+	uint64_t       id;
+	blkif_sector_t sector_number;
+	blkif_vdev_t   handle;
+	uint16_t       _pad2;
+	grant_ref_t    indirect_grefs[BLKIF_MAX_INDIRECT_PAGES_PER_REQUEST];
+#ifndef CONFIG_X86_32
+	uint32_t      _pad3;         /* make it 64 byte aligned */
+#else
+	uint64_t      _pad3;         /* make it 64 byte aligned */
+#endif
+} __attribute__((__packed__));
+
+struct blkif_request {
+	uint8_t        operation;    /* BLKIF_OP_???                         */
+	union {
+		struct blkif_request_rw rw;
+		struct blkif_request_discard discard;
+		struct blkif_request_other other;
+		struct blkif_request_indirect indirect;
+	} u;
+} __attribute__((__packed__));
+
+struct blkif_response {
+	uint64_t        id;              /* copied from request */
+	uint8_t         operation;       /* copied from request */
+	int16_t         status;          /* BLKIF_RSP_???       */
+};
+
+/*
+ * STATUS RETURN CODES.
+ */
+ /* Operation not supported (only happens on barrier writes). */
+#define BLKIF_RSP_EOPNOTSUPP  -2
+ /* Operation failed for some unspecified reason (-EIO). */
+#define BLKIF_RSP_ERROR       -1
+ /* Operation completed successfully. */
+#define BLKIF_RSP_OKAY         0
+
+/*
+ * Generate blkif ring structures and types.
+ */
+
+DEFINE_RING_TYPES(blkif, struct blkif_request, struct blkif_response);
+
+#define VDISK_CDROM        0x1
+#define VDISK_REMOVABLE    0x2
+#define VDISK_READONLY     0x4
+
+/* Xen-defined major numbers for virtual disks, they look strangely
+ * familiar */
+#define XEN_IDE0_MAJOR	3
+#define XEN_IDE1_MAJOR	22
+#define XEN_SCSI_DISK0_MAJOR	8
+#define XEN_SCSI_DISK1_MAJOR	65
+#define XEN_SCSI_DISK2_MAJOR	66
+#define XEN_SCSI_DISK3_MAJOR	67
+#define XEN_SCSI_DISK4_MAJOR	68
+#define XEN_SCSI_DISK5_MAJOR	69
+#define XEN_SCSI_DISK6_MAJOR	70
+#define XEN_SCSI_DISK7_MAJOR	71
+#define XEN_SCSI_DISK8_MAJOR	128
+#define XEN_SCSI_DISK9_MAJOR	129
+#define XEN_SCSI_DISK10_MAJOR	130
+#define XEN_SCSI_DISK11_MAJOR	131
+#define XEN_SCSI_DISK12_MAJOR	132
+#define XEN_SCSI_DISK13_MAJOR	133
+#define XEN_SCSI_DISK14_MAJOR	134
+#define XEN_SCSI_DISK15_MAJOR	135
+
+#endif /* __XEN_PUBLIC_IO_BLKIF_H__ */
diff --git a/include/xen/interface/io/console.h b/include/xen/interface/io/console.h
new file mode 100644
index 000000000..cf17e89ed
--- /dev/null
+++ b/include/xen/interface/io/console.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: MIT */
+/******************************************************************************
+ * console.h
+ *
+ * Console I/O interface for Xen guest OSes.
+ *
+ * Copyright (c) 2005, Keir Fraser
+ */
+
+#ifndef __XEN_PUBLIC_IO_CONSOLE_H__
+#define __XEN_PUBLIC_IO_CONSOLE_H__
+
+typedef uint32_t XENCONS_RING_IDX;
+
+#define MASK_XENCONS_IDX(idx, ring) ((idx) & (sizeof(ring)-1))
+
+struct xencons_interface {
+    char in[1024];
+    char out[2048];
+    XENCONS_RING_IDX in_cons, in_prod;
+    XENCONS_RING_IDX out_cons, out_prod;
+};
+
+#endif /* __XEN_PUBLIC_IO_CONSOLE_H__ */
diff --git a/include/xen/interface/io/displif.h b/include/xen/interface/io/displif.h
new file mode 100644
index 000000000..18417b017
--- /dev/null
+++ b/include/xen/interface/io/displif.h
@@ -0,0 +1,930 @@
+/* SPDX-License-Identifier: MIT */
+/******************************************************************************
+ * displif.h
+ *
+ * Unified display device I/O interface for Xen guest OSes.
+ *
+ * Copyright (C) 2016-2017 EPAM Systems Inc.
+ *
+ * Authors: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
+ *          Oleksandr Grytsov <oleksandr_grytsov@epam.com>
+ */
+
+#ifndef __XEN_PUBLIC_IO_DISPLIF_H__
+#define __XEN_PUBLIC_IO_DISPLIF_H__
+
+#include "ring.h"
+#include "../grant_table.h"
+
+/*
+ ******************************************************************************
+ *                           Protocol version
+ ******************************************************************************
+ */
+#define XENDISPL_PROTOCOL_VERSION	"2"
+#define XENDISPL_PROTOCOL_VERSION_INT	 2
+
+/*
+ ******************************************************************************
+ *                  Main features provided by the protocol
+ ******************************************************************************
+ * This protocol aims to provide a unified protocol which fits more
+ * sophisticated use-cases than a framebuffer device can handle. At the
+ * moment basic functionality is supported with the intention to be extended:
+ *  o multiple dynamically allocated/destroyed framebuffers
+ *  o buffers of arbitrary sizes
+ *  o buffer allocation at either back or front end
+ *  o better configuration options including multiple display support
+ *
+ * Note: existing fbif can be used together with displif running at the
+ * same time, e.g. on Linux one provides framebuffer and another DRM/KMS
+ *
+ * Note: display resolution (XenStore's "resolution" property) defines
+ * visible area of the virtual display. At the same time resolution of
+ * the display and frame buffers may differ: buffers can be smaller, equal
+ * or bigger than the visible area. This is to enable use-cases, where backend
+ * may do some post-processing of the display and frame buffers supplied,
+ * e.g. those buffers can be just a part of the final composition.
+ *
+ ******************************************************************************
+ *                        Direction of improvements
+ ******************************************************************************
+ * Future extensions to the existing protocol may include:
+ *  o display/connector cloning
+ *  o allocation of objects other than display buffers
+ *  o plane/overlay support
+ *  o scaling support
+ *  o rotation support
+ *
+ ******************************************************************************
+ *                  Feature and Parameter Negotiation
+ ******************************************************************************
+ *
+ * Front->back notifications: when enqueuing a new request, sending a
+ * notification can be made conditional on xendispl_req (i.e., the generic
+ * hold-off mechanism provided by the ring macros). Backends must set
+ * xendispl_req appropriately (e.g., using RING_FINAL_CHECK_FOR_REQUESTS()).
+ *
+ * Back->front notifications: when enqueuing a new response, sending a
+ * notification can be made conditional on xendispl_resp (i.e., the generic
+ * hold-off mechanism provided by the ring macros). Frontends must set
+ * xendispl_resp appropriately (e.g., using RING_FINAL_CHECK_FOR_RESPONSES()).
+ *
+ * The two halves of a para-virtual display driver utilize nodes within
+ * XenStore to communicate capabilities and to negotiate operating parameters.
+ * This section enumerates these nodes which reside in the respective front and
+ * backend portions of XenStore, following the XenBus convention.
+ *
+ * All data in XenStore is stored as strings. Nodes specifying numeric
+ * values are encoded in decimal. Integer value ranges listed below are
+ * expressed as fixed sized integer types capable of storing the conversion
+ * of a properly formated node string, without loss of information.
+ *
+ ******************************************************************************
+ *                        Example configuration
+ ******************************************************************************
+ *
+ * Note: depending on the use-case backend can expose more display connectors
+ * than the underlying HW physically has by employing SW graphics compositors
+ *
+ * This is an example of backend and frontend configuration:
+ *
+ *--------------------------------- Backend -----------------------------------
+ *
+ * /local/domain/0/backend/vdispl/1/0/frontend-id = "1"
+ * /local/domain/0/backend/vdispl/1/0/frontend = "/local/domain/1/device/vdispl/0"
+ * /local/domain/0/backend/vdispl/1/0/state = "4"
+ * /local/domain/0/backend/vdispl/1/0/versions = "1,2"
+ *
+ *--------------------------------- Frontend ----------------------------------
+ *
+ * /local/domain/1/device/vdispl/0/backend-id = "0"
+ * /local/domain/1/device/vdispl/0/backend = "/local/domain/0/backend/vdispl/1/0"
+ * /local/domain/1/device/vdispl/0/state = "4"
+ * /local/domain/1/device/vdispl/0/version = "1"
+ * /local/domain/1/device/vdispl/0/be-alloc = "1"
+ *
+ *-------------------------- Connector 0 configuration ------------------------
+ *
+ * /local/domain/1/device/vdispl/0/0/resolution = "1920x1080"
+ * /local/domain/1/device/vdispl/0/0/req-ring-ref = "2832"
+ * /local/domain/1/device/vdispl/0/0/req-event-channel = "15"
+ * /local/domain/1/device/vdispl/0/0/evt-ring-ref = "387"
+ * /local/domain/1/device/vdispl/0/0/evt-event-channel = "16"
+ *
+ *-------------------------- Connector 1 configuration ------------------------
+ *
+ * /local/domain/1/device/vdispl/0/1/resolution = "800x600"
+ * /local/domain/1/device/vdispl/0/1/req-ring-ref = "2833"
+ * /local/domain/1/device/vdispl/0/1/req-event-channel = "17"
+ * /local/domain/1/device/vdispl/0/1/evt-ring-ref = "388"
+ * /local/domain/1/device/vdispl/0/1/evt-event-channel = "18"
+ *
+ ******************************************************************************
+ *                            Backend XenBus Nodes
+ ******************************************************************************
+ *
+ *----------------------------- Protocol version ------------------------------
+ *
+ * versions
+ *      Values:         <string>
+ *
+ *      List of XENDISPL_LIST_SEPARATOR separated protocol versions supported
+ *      by the backend. For example "1,2,3".
+ *
+ ******************************************************************************
+ *                            Frontend XenBus Nodes
+ ******************************************************************************
+ *
+ *-------------------------------- Addressing ---------------------------------
+ *
+ * dom-id
+ *      Values:         <uint16_t>
+ *
+ *      Domain identifier.
+ *
+ * dev-id
+ *      Values:         <uint16_t>
+ *
+ *      Device identifier.
+ *
+ * conn-idx
+ *      Values:         <uint8_t>
+ *
+ *      Zero based contigous index of the connector.
+ *      /local/domain/<dom-id>/device/vdispl/<dev-id>/<conn-idx>/...
+ *
+ *----------------------------- Protocol version ------------------------------
+ *
+ * version
+ *      Values:         <string>
+ *
+ *      Protocol version, chosen among the ones supported by the backend.
+ *
+ *------------------------- Backend buffer allocation -------------------------
+ *
+ * be-alloc
+ *      Values:         "0", "1"
+ *
+ *      If value is set to "1", then backend can be a buffer provider/allocator
+ *      for this domain during XENDISPL_OP_DBUF_CREATE operation (see below
+ *      for negotiation).
+ *      If value is not "1" or omitted frontend must allocate buffers itself.
+ *
+ *----------------------------- Connector settings ----------------------------
+ *
+ * unique-id
+ *      Values:         <string>
+ *
+ *      After device instance initialization each connector is assigned a
+ *      unique ID, so it can be identified by the backend by this ID.
+ *      This can be UUID or such.
+ *
+ * resolution
+ *      Values:         <width, uint32_t>x<height, uint32_t>
+ *
+ *      Width and height of the connector in pixels separated by
+ *      XENDISPL_RESOLUTION_SEPARATOR. This defines visible area of the
+ *      display.
+ *      If backend provides extended display identification data (EDID) with
+ *      XENDISPL_OP_GET_EDID request then EDID values must take precedence
+ *      over the resolutions defined here.
+ *
+ *------------------ Connector Request Transport Parameters -------------------
+ *
+ * This communication path is used to deliver requests from frontend to backend
+ * and get the corresponding responses from backend to frontend,
+ * set up per connector.
+ *
+ * req-event-channel
+ *      Values:         <uint32_t>
+ *
+ *      The identifier of the Xen connector's control event channel
+ *      used to signal activity in the ring buffer.
+ *
+ * req-ring-ref
+ *      Values:         <uint32_t>
+ *
+ *      The Xen grant reference granting permission for the backend to map
+ *      a sole page of connector's control ring buffer.
+ *
+ *------------------- Connector Event Transport Parameters --------------------
+ *
+ * This communication path is used to deliver asynchronous events from backend
+ * to frontend, set up per connector.
+ *
+ * evt-event-channel
+ *      Values:         <uint32_t>
+ *
+ *      The identifier of the Xen connector's event channel
+ *      used to signal activity in the ring buffer.
+ *
+ * evt-ring-ref
+ *      Values:         <uint32_t>
+ *
+ *      The Xen grant reference granting permission for the backend to map
+ *      a sole page of connector's event ring buffer.
+ */
+
+/*
+ ******************************************************************************
+ *                               STATE DIAGRAMS
+ ******************************************************************************
+ *
+ * Tool stack creates front and back state nodes with initial state
+ * XenbusStateInitialising.
+ * Tool stack creates and sets up frontend display configuration
+ * nodes per domain.
+ *
+ *-------------------------------- Normal flow --------------------------------
+ *
+ * Front                                Back
+ * =================================    =====================================
+ * XenbusStateInitialising              XenbusStateInitialising
+ *                                       o Query backend device identification
+ *                                         data.
+ *                                       o Open and validate backend device.
+ *                                                |
+ *                                                |
+ *                                                V
+ *                                      XenbusStateInitWait
+ *
+ * o Query frontend configuration
+ * o Allocate and initialize
+ *   event channels per configured
+ *   connector.
+ * o Publish transport parameters
+ *   that will be in effect during
+ *   this connection.
+ *              |
+ *              |
+ *              V
+ * XenbusStateInitialised
+ *
+ *                                       o Query frontend transport parameters.
+ *                                       o Connect to the event channels.
+ *                                                |
+ *                                                |
+ *                                                V
+ *                                      XenbusStateConnected
+ *
+ *  o Create and initialize OS
+ *    virtual display connectors
+ *    as per configuration.
+ *              |
+ *              |
+ *              V
+ * XenbusStateConnected
+ *
+ *                                      XenbusStateUnknown
+ *                                      XenbusStateClosed
+ *                                      XenbusStateClosing
+ * o Remove virtual display device
+ * o Remove event channels
+ *              |
+ *              |
+ *              V
+ * XenbusStateClosed
+ *
+ *------------------------------- Recovery flow -------------------------------
+ *
+ * In case of frontend unrecoverable errors backend handles that as
+ * if frontend goes into the XenbusStateClosed state.
+ *
+ * In case of backend unrecoverable errors frontend tries removing
+ * the virtualized device. If this is possible at the moment of error,
+ * then frontend goes into the XenbusStateInitialising state and is ready for
+ * new connection with backend. If the virtualized device is still in use and
+ * cannot be removed, then frontend goes into the XenbusStateReconfiguring state
+ * until either the virtualized device is removed or backend initiates a new
+ * connection. On the virtualized device removal frontend goes into the
+ * XenbusStateInitialising state.
+ *
+ * Note on XenbusStateReconfiguring state of the frontend: if backend has
+ * unrecoverable errors then frontend cannot send requests to the backend
+ * and thus cannot provide functionality of the virtualized device anymore.
+ * After backend is back to normal the virtualized device may still hold some
+ * state: configuration in use, allocated buffers, client application state etc.
+ * In most cases, this will require frontend to implement complex recovery
+ * reconnect logic. Instead, by going into XenbusStateReconfiguring state,
+ * frontend will make sure no new clients of the virtualized device are
+ * accepted, allow existing client(s) to exit gracefully by signaling error
+ * state etc.
+ * Once all the clients are gone frontend can reinitialize the virtualized
+ * device and get into XenbusStateInitialising state again signaling the
+ * backend that a new connection can be made.
+ *
+ * There are multiple conditions possible under which frontend will go from
+ * XenbusStateReconfiguring into XenbusStateInitialising, some of them are OS
+ * specific. For example:
+ * 1. The underlying OS framework may provide callbacks to signal that the last
+ *    client of the virtualized device has gone and the device can be removed
+ * 2. Frontend can schedule a deferred work (timer/tasklet/workqueue)
+ *    to periodically check if this is the right time to re-try removal of
+ *    the virtualized device.
+ * 3. By any other means.
+ *
+ ******************************************************************************
+ *                             REQUEST CODES
+ ******************************************************************************
+ * Request codes [0; 15] are reserved and must not be used
+ */
+
+#define XENDISPL_OP_DBUF_CREATE		0x10
+#define XENDISPL_OP_DBUF_DESTROY	0x11
+#define XENDISPL_OP_FB_ATTACH		0x12
+#define XENDISPL_OP_FB_DETACH		0x13
+#define XENDISPL_OP_SET_CONFIG		0x14
+#define XENDISPL_OP_PG_FLIP		0x15
+/* The below command is available in protocol version 2 and above. */
+#define XENDISPL_OP_GET_EDID		0x16
+
+/*
+ ******************************************************************************
+ *                                 EVENT CODES
+ ******************************************************************************
+ */
+#define XENDISPL_EVT_PG_FLIP		0x00
+
+/*
+ ******************************************************************************
+ *               XENSTORE FIELD AND PATH NAME STRINGS, HELPERS
+ ******************************************************************************
+ */
+#define XENDISPL_DRIVER_NAME		"vdispl"
+
+#define XENDISPL_LIST_SEPARATOR		","
+#define XENDISPL_RESOLUTION_SEPARATOR	"x"
+
+#define XENDISPL_FIELD_BE_VERSIONS	"versions"
+#define XENDISPL_FIELD_FE_VERSION	"version"
+#define XENDISPL_FIELD_REQ_RING_REF	"req-ring-ref"
+#define XENDISPL_FIELD_REQ_CHANNEL	"req-event-channel"
+#define XENDISPL_FIELD_EVT_RING_REF	"evt-ring-ref"
+#define XENDISPL_FIELD_EVT_CHANNEL	"evt-event-channel"
+#define XENDISPL_FIELD_RESOLUTION	"resolution"
+#define XENDISPL_FIELD_BE_ALLOC		"be-alloc"
+#define XENDISPL_FIELD_UNIQUE_ID	"unique-id"
+
+#define XENDISPL_EDID_BLOCK_SIZE	128
+#define XENDISPL_EDID_BLOCK_COUNT	256
+#define XENDISPL_EDID_MAX_SIZE		(XENDISPL_EDID_BLOCK_SIZE * XENDISPL_EDID_BLOCK_COUNT)
+
+/*
+ ******************************************************************************
+ *                          STATUS RETURN CODES
+ ******************************************************************************
+ *
+ * Status return code is zero on success and -XEN_EXX on failure.
+ *
+ ******************************************************************************
+ *                              Assumptions
+ ******************************************************************************
+ * o usage of grant reference 0 as invalid grant reference:
+ *   grant reference 0 is valid, but never exposed to a PV driver,
+ *   because of the fact it is already in use/reserved by the PV console.
+ * o all references in this document to page sizes must be treated
+ *   as pages of size XEN_PAGE_SIZE unless otherwise noted.
+ *
+ ******************************************************************************
+ *       Description of the protocol between frontend and backend driver
+ ******************************************************************************
+ *
+ * The two halves of a Para-virtual display driver communicate with
+ * each other using shared pages and event channels.
+ * Shared page contains a ring with request/response packets.
+ *
+ * All reserved fields in the structures below must be 0.
+ * Display buffers's cookie of value 0 is treated as invalid.
+ * Framebuffer's cookie of value 0 is treated as invalid.
+ *
+ * For all request/response/event packets that use cookies:
+ *   dbuf_cookie - uint64_t, unique to guest domain value used by the backend
+ *     to map remote display buffer to its local one
+ *   fb_cookie - uint64_t, unique to guest domain value used by the backend
+ *     to map remote framebuffer to its local one
+ *
+ *---------------------------------- Requests ---------------------------------
+ *
+ * All requests/responses, which are not connector specific, must be sent over
+ * control ring of the connector which has the index value of 0:
+ *   /local/domain/<dom-id>/device/vdispl/<dev-id>/0/req-ring-ref
+ *
+ * All request packets have the same length (64 octets)
+ * All request packets have common header:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |    operation   |   reserved     | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ *   id - uint16_t, private guest value, echoed in response
+ *   operation - uint8_t, operation code, XENDISPL_OP_???
+ *
+ * Request dbuf creation - request creation of a display buffer.
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |_OP_DBUF_CREATE |   reserved     | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                       dbuf_cookie low 32-bit                      | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                       dbuf_cookie high 32-bit                     | 16
+ * +----------------+----------------+----------------+----------------+
+ * |                               width                               | 20
+ * +----------------+----------------+----------------+----------------+
+ * |                               height                              | 24
+ * +----------------+----------------+----------------+----------------+
+ * |                                bpp                                | 28
+ * +----------------+----------------+----------------+----------------+
+ * |                             buffer_sz                             | 32
+ * +----------------+----------------+----------------+----------------+
+ * |                               flags                               | 36
+ * +----------------+----------------+----------------+----------------+
+ * |                           gref_directory                          | 40
+ * +----------------+----------------+----------------+----------------+
+ * |                             data_ofs                              | 44
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 48
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ *
+ * Must be sent over control ring of the connector which has the index
+ * value of 0:
+ *   /local/domain/<dom-id>/device/vdispl/<dev-id>/0/req-ring-ref
+ * All unused bits in flags field must be set to 0.
+ *
+ * An attempt to create multiple display buffers with the same dbuf_cookie is
+ * an error. dbuf_cookie can be re-used after destroying the corresponding
+ * display buffer.
+ *
+ * Width and height of the display buffers can be smaller, equal or bigger
+ * than the connector's resolution. Depth/pixel format of the individual
+ * buffers can differ as well.
+ *
+ * width - uint32_t, width in pixels
+ * height - uint32_t, height in pixels
+ * bpp - uint32_t, bits per pixel
+ * buffer_sz - uint32_t, buffer size to be allocated, octets
+ * flags - uint32_t, flags of the operation
+ *   o XENDISPL_DBUF_FLG_REQ_ALLOC - if set, then backend is requested
+ *     to allocate the buffer with the parameters provided in this request.
+ *     Page directory is handled as follows:
+ *       Frontend on request:
+ *         o allocates pages for the directory (gref_directory,
+ *           gref_dir_next_page(s)
+ *         o grants permissions for the pages of the directory to the backend
+ *         o sets gref_dir_next_page fields
+ *       Backend on response:
+ *         o grants permissions for the pages of the buffer allocated to
+ *           the frontend
+ *         o fills in page directory with grant references
+ *           (gref[] in struct xendispl_page_directory)
+ * gref_directory - grant_ref_t, a reference to the first shared page
+ *   describing shared buffer references. At least one page exists. If shared
+ *   buffer size (buffer_sz) exceeds what can be addressed by this single page,
+ *   then reference to the next page must be supplied (see gref_dir_next_page
+ *   below)
+ * data_ofs - uint32_t, offset of the data in the buffer, octets
+ */
+
+#define XENDISPL_DBUF_FLG_REQ_ALLOC	(1 << 0)
+
+struct xendispl_dbuf_create_req {
+	uint64_t dbuf_cookie;
+	uint32_t width;
+	uint32_t height;
+	uint32_t bpp;
+	uint32_t buffer_sz;
+	uint32_t flags;
+	grant_ref_t gref_directory;
+	uint32_t data_ofs;
+};
+
+/*
+ * Shared page for XENDISPL_OP_DBUF_CREATE buffer descriptor (gref_directory in
+ * the request) employs a list of pages, describing all pages of the shared
+ * data buffer:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |                        gref_dir_next_page                         | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                              gref[0]                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                              gref[i]                              | i*4+8
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             gref[N - 1]                           | N*4+8
+ * +----------------+----------------+----------------+----------------+
+ *
+ * gref_dir_next_page - grant_ref_t, reference to the next page describing
+ *   page directory. Must be 0 if there are no more pages in the list.
+ * gref[i] - grant_ref_t, reference to a shared page of the buffer
+ *   allocated at XENDISPL_OP_DBUF_CREATE
+ *
+ * Number of grant_ref_t entries in the whole page directory is not
+ * passed, but instead can be calculated as:
+ *   num_grefs_total = (XENDISPL_OP_DBUF_CREATE.buffer_sz + XEN_PAGE_SIZE - 1) /
+ *       XEN_PAGE_SIZE
+ */
+
+struct xendispl_page_directory {
+	grant_ref_t gref_dir_next_page;
+	grant_ref_t gref[1]; /* Variable length */
+};
+
+/*
+ * Request dbuf destruction - destroy a previously allocated display buffer:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |_OP_DBUF_DESTROY|   reserved     | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                       dbuf_cookie low 32-bit                      | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                       dbuf_cookie high 32-bit                     | 16
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 20
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ *
+ * Must be sent over control ring of the connector which has the index
+ * value of 0:
+ *   /local/domain/<dom-id>/device/vdispl/<dev-id>/0/req-ring-ref
+ */
+
+struct xendispl_dbuf_destroy_req {
+	uint64_t dbuf_cookie;
+};
+
+/*
+ * Request framebuffer attachment - request attachment of a framebuffer to
+ * previously created display buffer.
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                | _OP_FB_ATTACH  |   reserved     | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                       dbuf_cookie low 32-bit                      | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                       dbuf_cookie high 32-bit                     | 16
+ * +----------------+----------------+----------------+----------------+
+ * |                        fb_cookie low 32-bit                       | 20
+ * +----------------+----------------+----------------+----------------+
+ * |                        fb_cookie high 32-bit                      | 24
+ * +----------------+----------------+----------------+----------------+
+ * |                               width                               | 28
+ * +----------------+----------------+----------------+----------------+
+ * |                               height                              | 32
+ * +----------------+----------------+----------------+----------------+
+ * |                            pixel_format                           | 36
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 40
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ *
+ * Must be sent over control ring of the connector which has the index
+ * value of 0:
+ *   /local/domain/<dom-id>/device/vdispl/<dev-id>/0/req-ring-ref
+ * Width and height can be smaller, equal or bigger than the connector's
+ * resolution.
+ *
+ * An attempt to create multiple frame buffers with the same fb_cookie is
+ * an error. fb_cookie can be re-used after destroying the corresponding
+ * frame buffer.
+ *
+ * width - uint32_t, width in pixels
+ * height - uint32_t, height in pixels
+ * pixel_format - uint32_t, pixel format of the framebuffer, FOURCC code
+ */
+
+struct xendispl_fb_attach_req {
+	uint64_t dbuf_cookie;
+	uint64_t fb_cookie;
+	uint32_t width;
+	uint32_t height;
+	uint32_t pixel_format;
+};
+
+/*
+ * Request framebuffer detach - detach a previously
+ * attached framebuffer from the display buffer in request:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |  _OP_FB_DETACH |   reserved     | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                        fb_cookie low 32-bit                       | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                        fb_cookie high 32-bit                      | 16
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 20
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ *
+ * Must be sent over control ring of the connector which has the index
+ * value of 0:
+ *   /local/domain/<dom-id>/device/vdispl/<dev-id>/0/req-ring-ref
+ */
+
+struct xendispl_fb_detach_req {
+	uint64_t fb_cookie;
+};
+
+/*
+ * Request configuration set/reset - request to set or reset
+ * the configuration/mode of the display:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                | _OP_SET_CONFIG |   reserved     | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                        fb_cookie low 32-bit                       | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                        fb_cookie high 32-bit                      | 16
+ * +----------------+----------------+----------------+----------------+
+ * |                                 x                                 | 20
+ * +----------------+----------------+----------------+----------------+
+ * |                                 y                                 | 24
+ * +----------------+----------------+----------------+----------------+
+ * |                               width                               | 28
+ * +----------------+----------------+----------------+----------------+
+ * |                               height                              | 32
+ * +----------------+----------------+----------------+----------------+
+ * |                                bpp                                | 40
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 44
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ *
+ * Pass all zeros to reset, otherwise command is treated as
+ * configuration set.
+ * Framebuffer's cookie defines which framebuffer/dbuf must be
+ * displayed while enabling display (applying configuration).
+ * x, y, width and height are bound by the connector's resolution and must not
+ * exceed it.
+ *
+ * x - uint32_t, starting position in pixels by X axis
+ * y - uint32_t, starting position in pixels by Y axis
+ * width - uint32_t, width in pixels
+ * height - uint32_t, height in pixels
+ * bpp - uint32_t, bits per pixel
+ */
+
+struct xendispl_set_config_req {
+	uint64_t fb_cookie;
+	uint32_t x;
+	uint32_t y;
+	uint32_t width;
+	uint32_t height;
+	uint32_t bpp;
+};
+
+/*
+ * Request page flip - request to flip a page identified by the framebuffer
+ * cookie:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                | _OP_PG_FLIP    |   reserved     | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                        fb_cookie low 32-bit                       | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                        fb_cookie high 32-bit                      | 16
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 20
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ */
+
+struct xendispl_page_flip_req {
+	uint64_t fb_cookie;
+};
+
+/*
+ * Request EDID - request EDID describing current connector:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                | _OP_GET_EDID   |   reserved     | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             buffer_sz                             | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                          gref_directory                           | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 16
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ *
+ * Notes:
+ *   - This command is not available in protocol version 1 and should be
+ *     ignored.
+ *   - This request is optional and if not supported then visible area
+ *     is defined by the relevant XenStore's "resolution" property.
+ *   - Shared buffer, allocated for EDID storage, must not be less then
+ *     XENDISPL_EDID_MAX_SIZE octets.
+ *
+ * buffer_sz - uint32_t, buffer size to be allocated, octets
+ * gref_directory - grant_ref_t, a reference to the first shared page
+ *   describing EDID buffer references. See XENDISPL_OP_DBUF_CREATE for
+ *   grant page directory structure (struct xendispl_page_directory).
+ *
+ * See response format for this request.
+ */
+
+struct xendispl_get_edid_req {
+	uint32_t buffer_sz;
+	grant_ref_t gref_directory;
+};
+
+/*
+ *---------------------------------- Responses --------------------------------
+ *
+ * All response packets have the same length (64 octets)
+ *
+ * All response packets have common header:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |            reserved             | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                              status                               | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 12
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ *
+ * id - uint16_t, private guest value, echoed from request
+ * status - int32_t, response status, zero on success and -XEN_EXX on failure
+ *
+ *
+ * Get EDID response - response for XENDISPL_OP_GET_EDID:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |    operation   |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                              status                               | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                             edid_sz                               | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 16
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ *
+ * Notes:
+ *   - This response is not available in protocol version 1 and should be
+ *     ignored.
+ *
+ * edid_sz - uint32_t, size of the EDID, octets
+ */
+
+struct xendispl_get_edid_resp {
+	uint32_t edid_sz;
+};
+
+/*
+ *----------------------------------- Events ----------------------------------
+ *
+ * Events are sent via a shared page allocated by the front and propagated by
+ *   evt-event-channel/evt-ring-ref XenStore entries
+ * All event packets have the same length (64 octets)
+ * All event packets have common header:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |      type      |   reserved     | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ *
+ * id - uint16_t, event id, may be used by front
+ * type - uint8_t, type of the event
+ *
+ *
+ * Page flip complete event - event from back to front on page flip completed:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |   _EVT_PG_FLIP |   reserved     | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                        fb_cookie low 32-bit                       | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                        fb_cookie high 32-bit                      | 16
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 20
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ */
+
+struct xendispl_pg_flip_evt {
+	uint64_t fb_cookie;
+};
+
+struct xendispl_req {
+	uint16_t id;
+	uint8_t operation;
+	uint8_t reserved[5];
+	union {
+		struct xendispl_dbuf_create_req dbuf_create;
+		struct xendispl_dbuf_destroy_req dbuf_destroy;
+		struct xendispl_fb_attach_req fb_attach;
+		struct xendispl_fb_detach_req fb_detach;
+		struct xendispl_set_config_req set_config;
+		struct xendispl_page_flip_req pg_flip;
+		struct xendispl_get_edid_req get_edid;
+		uint8_t reserved[56];
+	} op;
+};
+
+struct xendispl_resp {
+	uint16_t id;
+	uint8_t operation;
+	uint8_t reserved;
+	int32_t status;
+	union {
+		struct xendispl_get_edid_resp get_edid;
+		uint8_t reserved1[56];
+	} op;
+};
+
+struct xendispl_evt {
+	uint16_t id;
+	uint8_t type;
+	uint8_t reserved[5];
+	union {
+		struct xendispl_pg_flip_evt pg_flip;
+		uint8_t reserved[56];
+	} op;
+};
+
+DEFINE_RING_TYPES(xen_displif, struct xendispl_req, struct xendispl_resp);
+
+/*
+ ******************************************************************************
+ *                        Back to front events delivery
+ ******************************************************************************
+ * In order to deliver asynchronous events from back to front a shared page is
+ * allocated by front and its granted reference propagated to back via
+ * XenStore entries (evt-ring-ref/evt-event-channel).
+ * This page has a common header used by both front and back to synchronize
+ * access and control event's ring buffer, while back being a producer of the
+ * events and front being a consumer. The rest of the page after the header
+ * is used for event packets.
+ *
+ * Upon reception of an event(s) front may confirm its reception
+ * for either each event, group of events or none.
+ */
+
+struct xendispl_event_page {
+	uint32_t in_cons;
+	uint32_t in_prod;
+	uint8_t reserved[56];
+};
+
+#define XENDISPL_EVENT_PAGE_SIZE XEN_PAGE_SIZE
+#define XENDISPL_IN_RING_OFFS (sizeof(struct xendispl_event_page))
+#define XENDISPL_IN_RING_SIZE (XENDISPL_EVENT_PAGE_SIZE - XENDISPL_IN_RING_OFFS)
+#define XENDISPL_IN_RING_LEN (XENDISPL_IN_RING_SIZE / sizeof(struct xendispl_evt))
+#define XENDISPL_IN_RING(page) \
+	((struct xendispl_evt *)((char *)(page) + XENDISPL_IN_RING_OFFS))
+#define XENDISPL_IN_RING_REF(page, idx) \
+	(XENDISPL_IN_RING((page))[(idx) % XENDISPL_IN_RING_LEN])
+
+#endif /* __XEN_PUBLIC_IO_DISPLIF_H__ */
diff --git a/include/xen/interface/io/fbif.h b/include/xen/interface/io/fbif.h
new file mode 100644
index 000000000..60ca808ce
--- /dev/null
+++ b/include/xen/interface/io/fbif.h
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * fbif.h -- Xen virtual frame buffer device
+ *
+ * Copyright (C) 2005 Anthony Liguori <aliguori@us.ibm.com>
+ * Copyright (C) 2006 Red Hat, Inc., Markus Armbruster <armbru@redhat.com>
+ */
+
+#ifndef __XEN_PUBLIC_IO_FBIF_H__
+#define __XEN_PUBLIC_IO_FBIF_H__
+
+/* Out events (frontend -> backend) */
+
+/*
+ * Out events may be sent only when requested by backend, and receipt
+ * of an unknown out event is an error.
+ */
+
+/* Event type 1 currently not used */
+/*
+ * Framebuffer update notification event
+ * Capable frontend sets feature-update in xenstore.
+ * Backend requests it by setting request-update in xenstore.
+ */
+#define XENFB_TYPE_UPDATE 2
+
+struct xenfb_update {
+	uint8_t type;		/* XENFB_TYPE_UPDATE */
+	int32_t x;		/* source x */
+	int32_t y;		/* source y */
+	int32_t width;		/* rect width */
+	int32_t height;		/* rect height */
+};
+
+/*
+ * Framebuffer resize notification event
+ * Capable backend sets feature-resize in xenstore.
+ */
+#define XENFB_TYPE_RESIZE 3
+
+struct xenfb_resize {
+	uint8_t type;		/* XENFB_TYPE_RESIZE */
+	int32_t width;		/* width in pixels */
+	int32_t height;		/* height in pixels */
+	int32_t stride;		/* stride in bytes */
+	int32_t depth;		/* depth in bits */
+	int32_t offset;		/* start offset within framebuffer */
+};
+
+#define XENFB_OUT_EVENT_SIZE 40
+
+union xenfb_out_event {
+	uint8_t type;
+	struct xenfb_update update;
+	struct xenfb_resize resize;
+	char pad[XENFB_OUT_EVENT_SIZE];
+};
+
+/* In events (backend -> frontend) */
+
+/*
+ * Frontends should ignore unknown in events.
+ * No in events currently defined.
+ */
+
+#define XENFB_IN_EVENT_SIZE 40
+
+union xenfb_in_event {
+	uint8_t type;
+	char pad[XENFB_IN_EVENT_SIZE];
+};
+
+/* shared page */
+
+#define XENFB_IN_RING_SIZE 1024
+#define XENFB_IN_RING_LEN (XENFB_IN_RING_SIZE / XENFB_IN_EVENT_SIZE)
+#define XENFB_IN_RING_OFFS 1024
+#define XENFB_IN_RING(page) \
+	((union xenfb_in_event *)((char *)(page) + XENFB_IN_RING_OFFS))
+#define XENFB_IN_RING_REF(page, idx) \
+	(XENFB_IN_RING((page))[(idx) % XENFB_IN_RING_LEN])
+
+#define XENFB_OUT_RING_SIZE 2048
+#define XENFB_OUT_RING_LEN (XENFB_OUT_RING_SIZE / XENFB_OUT_EVENT_SIZE)
+#define XENFB_OUT_RING_OFFS (XENFB_IN_RING_OFFS + XENFB_IN_RING_SIZE)
+#define XENFB_OUT_RING(page) \
+	((union xenfb_out_event *)((char *)(page) + XENFB_OUT_RING_OFFS))
+#define XENFB_OUT_RING_REF(page, idx) \
+	(XENFB_OUT_RING((page))[(idx) % XENFB_OUT_RING_LEN])
+
+struct xenfb_page {
+	uint32_t in_cons, in_prod;
+	uint32_t out_cons, out_prod;
+
+	int32_t width;          /* width of the framebuffer (in pixels) */
+	int32_t height;         /* height of the framebuffer (in pixels) */
+	uint32_t line_length;   /* length of a row of pixels (in bytes) */
+	uint32_t mem_length;    /* length of the framebuffer (in bytes) */
+	uint8_t depth;          /* depth of a pixel (in bits) */
+
+	/*
+	 * Framebuffer page directory
+	 *
+	 * Each directory page holds PAGE_SIZE / sizeof(*pd)
+	 * framebuffer pages, and can thus map up to PAGE_SIZE *
+	 * PAGE_SIZE / sizeof(*pd) bytes.  With PAGE_SIZE == 4096 and
+	 * sizeof(unsigned long) == 4/8, that's 4 Megs 32 bit and 2
+	 * Megs 64 bit.  256 directories give enough room for a 512
+	 * Meg framebuffer with a max resolution of 12,800x10,240.
+	 * Should be enough for a while with room leftover for
+	 * expansion.
+	 */
+	unsigned long pd[256];
+};
+
+/*
+ * Wart: xenkbd needs to know default resolution.  Put it here until a
+ * better solution is found, but don't leak it to the backend.
+ */
+#ifdef __KERNEL__
+#define XENFB_WIDTH 800
+#define XENFB_HEIGHT 600
+#define XENFB_DEPTH 32
+#endif
+
+#endif
diff --git a/include/xen/interface/io/kbdif.h b/include/xen/interface/io/kbdif.h
new file mode 100644
index 000000000..b8b08aa53
--- /dev/null
+++ b/include/xen/interface/io/kbdif.h
@@ -0,0 +1,543 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * kbdif.h -- Xen virtual keyboard/mouse
+ *
+ * Copyright (C) 2005 Anthony Liguori <aliguori@us.ibm.com>
+ * Copyright (C) 2006 Red Hat, Inc., Markus Armbruster <armbru@redhat.com>
+ */
+
+#ifndef __XEN_PUBLIC_IO_KBDIF_H__
+#define __XEN_PUBLIC_IO_KBDIF_H__
+
+/*
+ *****************************************************************************
+ *                     Feature and Parameter Negotiation
+ *****************************************************************************
+ *
+ * The two halves of a para-virtual driver utilize nodes within
+ * XenStore to communicate capabilities and to negotiate operating parameters.
+ * This section enumerates these nodes which reside in the respective front and
+ * backend portions of XenStore, following XenBus convention.
+ *
+ * All data in XenStore is stored as strings.  Nodes specifying numeric
+ * values are encoded in decimal. Integer value ranges listed below are
+ * expressed as fixed sized integer types capable of storing the conversion
+ * of a properly formated node string, without loss of information.
+ *
+ *****************************************************************************
+ *                            Backend XenBus Nodes
+ *****************************************************************************
+ *
+ *---------------------------- Features supported ----------------------------
+ *
+ * Capable backend advertises supported features by publishing
+ * corresponding entries in XenStore and puts 1 as the value of the entry.
+ * If a feature is not supported then 0 must be set or feature entry omitted.
+ *
+ * feature-disable-keyboard
+ *      Values:         <uint>
+ *
+ *      If there is no need to expose a virtual keyboard device by the
+ *      frontend then this must be set to 1.
+ *
+ * feature-disable-pointer
+ *      Values:         <uint>
+ *
+ *      If there is no need to expose a virtual pointer device by the
+ *      frontend then this must be set to 1.
+ *
+ * feature-abs-pointer
+ *      Values:         <uint>
+ *
+ *      Backends, which support reporting of absolute coordinates for pointer
+ *      device should set this to 1.
+ *
+ * feature-multi-touch
+ *      Values:         <uint>
+ *
+ *      Backends, which support reporting of multi-touch events
+ *      should set this to 1.
+ *
+ * feature-raw-pointer
+ *      Values:        <uint>
+ *
+ *      Backends, which support reporting raw (unscaled) absolute coordinates
+ *      for pointer devices should set this to 1. Raw (unscaled) values have
+ *      a range of [0, 0x7fff].
+ *
+ *-----------------------  Device Instance Parameters ------------------------
+ *
+ * unique-id
+ *      Values:         <string>
+ *
+ *      After device instance initialization it is assigned a unique ID,
+ *      so every instance of the frontend can be identified by the backend
+ *      by this ID. This can be UUID or such.
+ *
+ *------------------------- Pointer Device Parameters ------------------------
+ *
+ * width
+ *      Values:         <uint>
+ *
+ *      Maximum X coordinate (width) to be used by the frontend
+ *      while reporting input events, pixels, [0; UINT32_MAX].
+ *
+ * height
+ *      Values:         <uint>
+ *
+ *      Maximum Y coordinate (height) to be used by the frontend
+ *      while reporting input events, pixels, [0; UINT32_MAX].
+ *
+ *----------------------- Multi-touch Device Parameters ----------------------
+ *
+ * multi-touch-num-contacts
+ *      Values:         <uint>
+ *
+ *      Number of simultaneous touches reported.
+ *
+ * multi-touch-width
+ *      Values:         <uint>
+ *
+ *      Width of the touch area to be used by the frontend
+ *      while reporting input events, pixels, [0; UINT32_MAX].
+ *
+ * multi-touch-height
+ *      Values:         <uint>
+ *
+ *      Height of the touch area to be used by the frontend
+ *      while reporting input events, pixels, [0; UINT32_MAX].
+ *
+ *****************************************************************************
+ *                            Frontend XenBus Nodes
+ *****************************************************************************
+ *
+ *------------------------------ Feature request -----------------------------
+ *
+ * Capable frontend requests features from backend via setting corresponding
+ * entries to 1 in XenStore. Requests for features not advertised as supported
+ * by the backend have no effect.
+ *
+ * request-abs-pointer
+ *      Values:         <uint>
+ *
+ *      Request backend to report absolute pointer coordinates
+ *      (XENKBD_TYPE_POS) instead of relative ones (XENKBD_TYPE_MOTION).
+ *
+ * request-multi-touch
+ *      Values:         <uint>
+ *
+ *      Request backend to report multi-touch events.
+ *
+ * request-raw-pointer
+ *      Values:         <uint>
+ *
+ *      Request backend to report raw unscaled absolute pointer coordinates.
+ *      This option is only valid if request-abs-pointer is also set.
+ *      Raw unscaled coordinates have the range [0, 0x7fff]
+ *
+ *----------------------- Request Transport Parameters -----------------------
+ *
+ * event-channel
+ *      Values:         <uint>
+ *
+ *      The identifier of the Xen event channel used to signal activity
+ *      in the ring buffer.
+ *
+ * page-gref
+ *      Values:         <uint>
+ *
+ *      The Xen grant reference granting permission for the backend to map
+ *      a sole page in a single page sized event ring buffer.
+ *
+ * page-ref
+ *      Values:         <uint>
+ *
+ *      OBSOLETE, not recommended for use.
+ *      PFN of the shared page.
+ */
+
+/*
+ * EVENT CODES.
+ */
+
+#define XENKBD_TYPE_MOTION		1
+#define XENKBD_TYPE_RESERVED		2
+#define XENKBD_TYPE_KEY			3
+#define XENKBD_TYPE_POS			4
+#define XENKBD_TYPE_MTOUCH		5
+
+/* Multi-touch event sub-codes */
+
+#define XENKBD_MT_EV_DOWN		0
+#define XENKBD_MT_EV_UP			1
+#define XENKBD_MT_EV_MOTION		2
+#define XENKBD_MT_EV_SYN		3
+#define XENKBD_MT_EV_SHAPE		4
+#define XENKBD_MT_EV_ORIENT		5
+
+/*
+ * CONSTANTS, XENSTORE FIELD AND PATH NAME STRINGS, HELPERS.
+ */
+
+#define XENKBD_DRIVER_NAME		"vkbd"
+
+#define XENKBD_FIELD_FEAT_DSBL_KEYBRD	"feature-disable-keyboard"
+#define XENKBD_FIELD_FEAT_DSBL_POINTER	"feature-disable-pointer"
+#define XENKBD_FIELD_FEAT_ABS_POINTER	"feature-abs-pointer"
+#define XENKBD_FIELD_FEAT_RAW_POINTER	"feature-raw-pointer"
+#define XENKBD_FIELD_FEAT_MTOUCH	"feature-multi-touch"
+#define XENKBD_FIELD_REQ_ABS_POINTER	"request-abs-pointer"
+#define XENKBD_FIELD_REQ_RAW_POINTER	"request-raw-pointer"
+#define XENKBD_FIELD_REQ_MTOUCH		"request-multi-touch"
+#define XENKBD_FIELD_RING_GREF		"page-gref"
+#define XENKBD_FIELD_EVT_CHANNEL	"event-channel"
+#define XENKBD_FIELD_WIDTH		"width"
+#define XENKBD_FIELD_HEIGHT		"height"
+#define XENKBD_FIELD_MT_WIDTH		"multi-touch-width"
+#define XENKBD_FIELD_MT_HEIGHT		"multi-touch-height"
+#define XENKBD_FIELD_MT_NUM_CONTACTS	"multi-touch-num-contacts"
+#define XENKBD_FIELD_UNIQUE_ID		"unique-id"
+
+/* OBSOLETE, not recommended for use */
+#define XENKBD_FIELD_RING_REF		"page-ref"
+
+/*
+ *****************************************************************************
+ * Description of the protocol between frontend and backend driver.
+ *****************************************************************************
+ *
+ * The two halves of a Para-virtual driver communicate with
+ * each other using a shared page and an event channel.
+ * Shared page contains a ring with event structures.
+ *
+ * All reserved fields in the structures below must be 0.
+ *
+ *****************************************************************************
+ *                           Backend to frontend events
+ *****************************************************************************
+ *
+ * Frontends should ignore unknown in events.
+ * All event packets have the same length (40 octets)
+ * All event packets have common header:
+ *
+ *          0         octet
+ * +-----------------+
+ * |       type      |
+ * +-----------------+
+ * type - uint8_t, event code, XENKBD_TYPE_???
+ *
+ *
+ * Pointer relative movement event
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |  _TYPE_MOTION  |                     reserved                     | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                               rel_x                               | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                               rel_y                               | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                               rel_z                               | 16
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 20
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 40
+ * +----------------+----------------+----------------+----------------+
+ *
+ * rel_x - int32_t, relative X motion
+ * rel_y - int32_t, relative Y motion
+ * rel_z - int32_t, relative Z motion (wheel)
+ */
+
+struct xenkbd_motion {
+	uint8_t type;
+	int32_t rel_x;
+	int32_t rel_y;
+	int32_t rel_z;
+};
+
+/*
+ * Key event (includes pointer buttons)
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |  _TYPE_KEY     |     pressed    |            reserved             | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                              keycode                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 12
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 40
+ * +----------------+----------------+----------------+----------------+
+ *
+ * pressed - uint8_t, 1 if pressed; 0 otherwise
+ * keycode - uint32_t, KEY_* from linux/input.h
+ */
+
+struct xenkbd_key {
+	uint8_t type;
+	uint8_t pressed;
+	uint32_t keycode;
+};
+
+/*
+ * Pointer absolute position event
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |  _TYPE_POS     |                     reserved                     | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                               abs_x                               | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                               abs_y                               | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                               rel_z                               | 16
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 20
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 40
+ * +----------------+----------------+----------------+----------------+
+ *
+ * abs_x - int32_t, absolute X position (in FB pixels)
+ * abs_y - int32_t, absolute Y position (in FB pixels)
+ * rel_z - int32_t, relative Z motion (wheel)
+ */
+
+struct xenkbd_position {
+	uint8_t type;
+	int32_t abs_x;
+	int32_t abs_y;
+	int32_t rel_z;
+};
+
+/*
+ * Multi-touch event and its sub-types
+ *
+ * All multi-touch event packets have common header:
+ *
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |  _TYPE_MTOUCH  |   event_type   |   contact_id   |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ *
+ * event_type - unt8_t, multi-touch event sub-type, XENKBD_MT_EV_???
+ * contact_id - unt8_t, ID of the contact
+ *
+ * Touch interactions can consist of one or more contacts.
+ * For each contact, a series of events is generated, starting
+ * with a down event, followed by zero or more motion events,
+ * and ending with an up event. Events relating to the same
+ * contact point can be identified by the ID of the sequence: contact ID.
+ * Contact ID may be reused after XENKBD_MT_EV_UP event and
+ * is in the [0; XENKBD_FIELD_NUM_CONTACTS - 1] range.
+ *
+ * For further information please refer to documentation on Wayland [1],
+ * Linux [2] and Windows [3] multi-touch support.
+ *
+ * [1] https://cgit.freedesktop.org/wayland/wayland/tree/protocol/wayland.xml
+ * [2] https://www.kernel.org/doc/Documentation/input/multi-touch-protocol.rst
+ * [3] https://msdn.microsoft.com/en-us/library/jj151564(v=vs.85).aspx
+ *
+ *
+ * Multi-touch down event - sent when a new touch is made: touch is assigned
+ * a unique contact ID, sent with this and consequent events related
+ * to this touch.
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |  _TYPE_MTOUCH  |   _MT_EV_DOWN  |   contact_id   |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                               abs_x                               | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                               abs_y                               | 16
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 20
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 40
+ * +----------------+----------------+----------------+----------------+
+ *
+ * abs_x - int32_t, absolute X position, in pixels
+ * abs_y - int32_t, absolute Y position, in pixels
+ *
+ * Multi-touch contact release event
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |  _TYPE_MTOUCH  |  _MT_EV_UP     |   contact_id   |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 40
+ * +----------------+----------------+----------------+----------------+
+ *
+ * Multi-touch motion event
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |  _TYPE_MTOUCH  |  _MT_EV_MOTION |   contact_id   |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                               abs_x                               | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                               abs_y                               | 16
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 20
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 40
+ * +----------------+----------------+----------------+----------------+
+ *
+ * abs_x - int32_t, absolute X position, in pixels,
+ * abs_y - int32_t, absolute Y position, in pixels,
+ *
+ * Multi-touch input synchronization event - shows end of a set of events
+ * which logically belong together.
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |  _TYPE_MTOUCH  |  _MT_EV_SYN    |   contact_id   |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 40
+ * +----------------+----------------+----------------+----------------+
+ *
+ * Multi-touch shape event - touch point's shape has changed its shape.
+ * Shape is approximated by an ellipse through the major and minor axis
+ * lengths: major is the longer diameter of the ellipse and minor is the
+ * shorter one. Center of the ellipse is reported via
+ * XENKBD_MT_EV_DOWN/XENKBD_MT_EV_MOTION events.
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |  _TYPE_MTOUCH  |  _MT_EV_SHAPE  |   contact_id   |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                               major                               | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                               minor                               | 16
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 20
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 40
+ * +----------------+----------------+----------------+----------------+
+ *
+ * major - unt32_t, length of the major axis, pixels
+ * minor - unt32_t, length of the minor axis, pixels
+ *
+ * Multi-touch orientation event - touch point's shape has changed
+ * its orientation: calculated as a clockwise angle between the major axis
+ * of the ellipse and positive Y axis in degrees, [-180; +180].
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |  _TYPE_MTOUCH  |  _MT_EV_ORIENT |   contact_id   |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |           orientation           |            reserved             | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 16
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 40
+ * +----------------+----------------+----------------+----------------+
+ *
+ * orientation - int16_t, clockwise angle of the major axis
+ */
+
+struct xenkbd_mtouch {
+	uint8_t type;			/* XENKBD_TYPE_MTOUCH */
+	uint8_t event_type;		/* XENKBD_MT_EV_??? */
+	uint8_t contact_id;
+	uint8_t reserved[5];		/* reserved for the future use */
+	union {
+		struct {
+			int32_t abs_x;	/* absolute X position, pixels */
+			int32_t abs_y;	/* absolute Y position, pixels */
+		} pos;
+		struct {
+			uint32_t major;	/* length of the major axis, pixels */
+			uint32_t minor;	/* length of the minor axis, pixels */
+		} shape;
+		int16_t orientation;	/* clockwise angle of the major axis */
+	} u;
+};
+
+#define XENKBD_IN_EVENT_SIZE 40
+
+union xenkbd_in_event {
+	uint8_t type;
+	struct xenkbd_motion motion;
+	struct xenkbd_key key;
+	struct xenkbd_position pos;
+	struct xenkbd_mtouch mtouch;
+	char pad[XENKBD_IN_EVENT_SIZE];
+};
+
+/*
+ *****************************************************************************
+ *                            Frontend to backend events
+ *****************************************************************************
+ *
+ * Out events may be sent only when requested by backend, and receipt
+ * of an unknown out event is an error.
+ * No out events currently defined.
+
+ * All event packets have the same length (40 octets)
+ * All event packets have common header:
+ *          0         octet
+ * +-----------------+
+ * |       type      |
+ * +-----------------+
+ * type - uint8_t, event code
+ */
+
+#define XENKBD_OUT_EVENT_SIZE 40
+
+union xenkbd_out_event {
+	uint8_t type;
+	char pad[XENKBD_OUT_EVENT_SIZE];
+};
+
+/*
+ *****************************************************************************
+ *                            Shared page
+ *****************************************************************************
+ */
+
+#define XENKBD_IN_RING_SIZE 2048
+#define XENKBD_IN_RING_LEN (XENKBD_IN_RING_SIZE / XENKBD_IN_EVENT_SIZE)
+#define XENKBD_IN_RING_OFFS 1024
+#define XENKBD_IN_RING(page) \
+	((union xenkbd_in_event *)((char *)(page) + XENKBD_IN_RING_OFFS))
+#define XENKBD_IN_RING_REF(page, idx) \
+	(XENKBD_IN_RING((page))[(idx) % XENKBD_IN_RING_LEN])
+
+#define XENKBD_OUT_RING_SIZE 1024
+#define XENKBD_OUT_RING_LEN (XENKBD_OUT_RING_SIZE / XENKBD_OUT_EVENT_SIZE)
+#define XENKBD_OUT_RING_OFFS (XENKBD_IN_RING_OFFS + XENKBD_IN_RING_SIZE)
+#define XENKBD_OUT_RING(page) \
+	((union xenkbd_out_event *)((char *)(page) + XENKBD_OUT_RING_OFFS))
+#define XENKBD_OUT_RING_REF(page, idx) \
+	(XENKBD_OUT_RING((page))[(idx) % XENKBD_OUT_RING_LEN])
+
+struct xenkbd_page {
+	uint32_t in_cons, in_prod;
+	uint32_t out_cons, out_prod;
+};
+
+#endif /* __XEN_PUBLIC_IO_KBDIF_H__ */
diff --git a/include/xen/interface/io/netif.h b/include/xen/interface/io/netif.h
new file mode 100644
index 000000000..cb0c1a25d
--- /dev/null
+++ b/include/xen/interface/io/netif.h
@@ -0,0 +1,940 @@
+/* SPDX-License-Identifier: MIT */
+/******************************************************************************
+ * xen_netif.h
+ *
+ * Unified network-device I/O interface for Xen guest OSes.
+ *
+ * Copyright (c) 2003-2004, Keir Fraser
+ */
+
+#ifndef __XEN_PUBLIC_IO_XEN_NETIF_H__
+#define __XEN_PUBLIC_IO_XEN_NETIF_H__
+
+#include "ring.h"
+#include "../grant_table.h"
+
+/*
+ * Older implementation of Xen network frontend / backend has an
+ * implicit dependency on the MAX_SKB_FRAGS as the maximum number of
+ * ring slots a skb can use. Netfront / netback may not work as
+ * expected when frontend and backend have different MAX_SKB_FRAGS.
+ *
+ * A better approach is to add mechanism for netfront / netback to
+ * negotiate this value. However we cannot fix all possible
+ * frontends, so we need to define a value which states the minimum
+ * slots backend must support.
+ *
+ * The minimum value derives from older Linux kernel's MAX_SKB_FRAGS
+ * (18), which is proved to work with most frontends. Any new backend
+ * which doesn't negotiate with frontend should expect frontend to
+ * send a valid packet using slots up to this value.
+ */
+#define XEN_NETIF_NR_SLOTS_MIN 18
+
+/*
+ * Notifications after enqueuing any type of message should be conditional on
+ * the appropriate req_event or rsp_event field in the shared ring.
+ * If the client sends notification for rx requests then it should specify
+ * feature 'feature-rx-notify' via xenbus. Otherwise the backend will assume
+ * that it cannot safely queue packets (as it may not be kicked to send them).
+ */
+
+/*
+ * "feature-split-event-channels" is introduced to separate guest TX
+ * and RX notification. Backend either doesn't support this feature or
+ * advertises it via xenstore as 0 (disabled) or 1 (enabled).
+ *
+ * To make use of this feature, frontend should allocate two event
+ * channels for TX and RX, advertise them to backend as
+ * "event-channel-tx" and "event-channel-rx" respectively. If frontend
+ * doesn't want to use this feature, it just writes "event-channel"
+ * node as before.
+ */
+
+/*
+ * Multiple transmit and receive queues:
+ * If supported, the backend will write the key "multi-queue-max-queues" to
+ * the directory for that vif, and set its value to the maximum supported
+ * number of queues.
+ * Frontends that are aware of this feature and wish to use it can write the
+ * key "multi-queue-num-queues", set to the number they wish to use, which
+ * must be greater than zero, and no more than the value reported by the backend
+ * in "multi-queue-max-queues".
+ *
+ * Queues replicate the shared rings and event channels.
+ * "feature-split-event-channels" may optionally be used when using
+ * multiple queues, but is not mandatory.
+ *
+ * Each queue consists of one shared ring pair, i.e. there must be the same
+ * number of tx and rx rings.
+ *
+ * For frontends requesting just one queue, the usual event-channel and
+ * ring-ref keys are written as before, simplifying the backend processing
+ * to avoid distinguishing between a frontend that doesn't understand the
+ * multi-queue feature, and one that does, but requested only one queue.
+ *
+ * Frontends requesting two or more queues must not write the toplevel
+ * event-channel (or event-channel-{tx,rx}) and {tx,rx}-ring-ref keys,
+ * instead writing those keys under sub-keys having the name "queue-N" where
+ * N is the integer ID of the queue for which those keys belong. Queues
+ * are indexed from zero. For example, a frontend with two queues and split
+ * event channels must write the following set of queue-related keys:
+ *
+ * /local/domain/1/device/vif/0/multi-queue-num-queues = "2"
+ * /local/domain/1/device/vif/0/queue-0 = ""
+ * /local/domain/1/device/vif/0/queue-0/tx-ring-ref = "<ring-ref-tx0>"
+ * /local/domain/1/device/vif/0/queue-0/rx-ring-ref = "<ring-ref-rx0>"
+ * /local/domain/1/device/vif/0/queue-0/event-channel-tx = "<evtchn-tx0>"
+ * /local/domain/1/device/vif/0/queue-0/event-channel-rx = "<evtchn-rx0>"
+ * /local/domain/1/device/vif/0/queue-1 = ""
+ * /local/domain/1/device/vif/0/queue-1/tx-ring-ref = "<ring-ref-tx1>"
+ * /local/domain/1/device/vif/0/queue-1/rx-ring-ref = "<ring-ref-rx1"
+ * /local/domain/1/device/vif/0/queue-1/event-channel-tx = "<evtchn-tx1>"
+ * /local/domain/1/device/vif/0/queue-1/event-channel-rx = "<evtchn-rx1>"
+ *
+ * If there is any inconsistency in the XenStore data, the backend may
+ * choose not to connect any queues, instead treating the request as an
+ * error. This includes scenarios where more (or fewer) queues were
+ * requested than the frontend provided details for.
+ *
+ * Mapping of packets to queues is considered to be a function of the
+ * transmitting system (backend or frontend) and is not negotiated
+ * between the two. Guests are free to transmit packets on any queue
+ * they choose, provided it has been set up correctly. Guests must be
+ * prepared to receive packets on any queue they have requested be set up.
+ */
+
+/*
+ * "feature-no-csum-offload" should be used to turn IPv4 TCP/UDP checksum
+ * offload off or on. If it is missing then the feature is assumed to be on.
+ * "feature-ipv6-csum-offload" should be used to turn IPv6 TCP/UDP checksum
+ * offload on or off. If it is missing then the feature is assumed to be off.
+ */
+
+/*
+ * "feature-gso-tcpv4" and "feature-gso-tcpv6" advertise the capability to
+ * handle large TCP packets (in IPv4 or IPv6 form respectively). Neither
+ * frontends nor backends are assumed to be capable unless the flags are
+ * present.
+ */
+
+/*
+ * "feature-multicast-control" and "feature-dynamic-multicast-control"
+ * advertise the capability to filter ethernet multicast packets in the
+ * backend. If the frontend wishes to take advantage of this feature then
+ * it may set "request-multicast-control". If the backend only advertises
+ * "feature-multicast-control" then "request-multicast-control" must be set
+ * before the frontend moves into the connected state. The backend will
+ * sample the value on this state transition and any subsequent change in
+ * value will have no effect. However, if the backend also advertises
+ * "feature-dynamic-multicast-control" then "request-multicast-control"
+ * may be set by the frontend at any time. In this case, the backend will
+ * watch the value and re-sample on watch events.
+ *
+ * If the sampled value of "request-multicast-control" is set then the
+ * backend transmit side should no longer flood multicast packets to the
+ * frontend, it should instead drop any multicast packet that does not
+ * match in a filter list.
+ * The list is amended by the frontend by sending dummy transmit requests
+ * containing XEN_NETIF_EXTRA_TYPE_MCAST_{ADD,DEL} extra-info fragments as
+ * specified below.
+ * Note that the filter list may be amended even if the sampled value of
+ * "request-multicast-control" is not set, however the filter should only
+ * be applied if it is set.
+ */
+
+/*
+ * "xdp-headroom" is used to request that extra space is added
+ * for XDP processing.  The value is measured in bytes and passed by
+ * the frontend to be consistent between both ends.
+ * If the value is greater than zero that means that
+ * an RX response is going to be passed to an XDP program for processing.
+ * XEN_NETIF_MAX_XDP_HEADROOM defines the maximum headroom offset in bytes
+ *
+ * "feature-xdp-headroom" is set to "1" by the netback side like other features
+ * so a guest can check if an XDP program can be processed.
+ */
+#define XEN_NETIF_MAX_XDP_HEADROOM 0x7FFF
+
+/*
+ * Control ring
+ * ============
+ *
+ * Some features, such as hashing (detailed below), require a
+ * significant amount of out-of-band data to be passed from frontend to
+ * backend. Use of xenstore is not suitable for large quantities of data
+ * because of quota limitations and so a dedicated 'control ring' is used.
+ * The ability of the backend to use a control ring is advertised by
+ * setting:
+ *
+ * /local/domain/X/backend/<domid>/<vif>/feature-ctrl-ring = "1"
+ *
+ * The frontend provides a control ring to the backend by setting:
+ *
+ * /local/domain/<domid>/device/vif/<vif>/ctrl-ring-ref = <gref>
+ * /local/domain/<domid>/device/vif/<vif>/event-channel-ctrl = <port>
+ *
+ * where <gref> is the grant reference of the shared page used to
+ * implement the control ring and <port> is an event channel to be used
+ * as a mailbox interrupt. These keys must be set before the frontend
+ * moves into the connected state.
+ *
+ * The control ring uses a fixed request/response message size and is
+ * balanced (i.e. one request to one response), so operationally it is much
+ * the same as a transmit or receive ring.
+ * Note that there is no requirement that responses are issued in the same
+ * order as requests.
+ */
+
+/*
+ * Hash types
+ * ==========
+ *
+ * For the purposes of the definitions below, 'Packet[]' is an array of
+ * octets containing an IP packet without options, 'Array[X..Y]' means a
+ * sub-array of 'Array' containing bytes X thru Y inclusive, and '+' is
+ * used to indicate concatenation of arrays.
+ */
+
+/*
+ * A hash calculated over an IP version 4 header as follows:
+ *
+ * Buffer[0..8] = Packet[12..15] (source address) +
+ *                Packet[16..19] (destination address)
+ *
+ * Result = Hash(Buffer, 8)
+ */
+#define _XEN_NETIF_CTRL_HASH_TYPE_IPV4 0
+#define XEN_NETIF_CTRL_HASH_TYPE_IPV4 \
+	(1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV4)
+
+/*
+ * A hash calculated over an IP version 4 header and TCP header as
+ * follows:
+ *
+ * Buffer[0..12] = Packet[12..15] (source address) +
+ *                 Packet[16..19] (destination address) +
+ *                 Packet[20..21] (source port) +
+ *                 Packet[22..23] (destination port)
+ *
+ * Result = Hash(Buffer, 12)
+ */
+#define _XEN_NETIF_CTRL_HASH_TYPE_IPV4_TCP 1
+#define XEN_NETIF_CTRL_HASH_TYPE_IPV4_TCP \
+	(1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV4_TCP)
+
+/*
+ * A hash calculated over an IP version 6 header as follows:
+ *
+ * Buffer[0..32] = Packet[8..23]  (source address ) +
+ *                 Packet[24..39] (destination address)
+ *
+ * Result = Hash(Buffer, 32)
+ */
+#define _XEN_NETIF_CTRL_HASH_TYPE_IPV6 2
+#define XEN_NETIF_CTRL_HASH_TYPE_IPV6 \
+	(1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV6)
+
+/*
+ * A hash calculated over an IP version 6 header and TCP header as
+ * follows:
+ *
+ * Buffer[0..36] = Packet[8..23]  (source address) +
+ *                 Packet[24..39] (destination address) +
+ *                 Packet[40..41] (source port) +
+ *                 Packet[42..43] (destination port)
+ *
+ * Result = Hash(Buffer, 36)
+ */
+#define _XEN_NETIF_CTRL_HASH_TYPE_IPV6_TCP 3
+#define XEN_NETIF_CTRL_HASH_TYPE_IPV6_TCP \
+	(1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV6_TCP)
+
+/*
+ * Hash algorithms
+ * ===============
+ */
+
+#define XEN_NETIF_CTRL_HASH_ALGORITHM_NONE 0
+
+/*
+ * Toeplitz hash:
+ */
+
+#define XEN_NETIF_CTRL_HASH_ALGORITHM_TOEPLITZ 1
+
+/*
+ * This algorithm uses a 'key' as well as the data buffer itself.
+ * (Buffer[] and Key[] are treated as shift-registers where the MSB of
+ * Buffer/Key[0] is considered 'left-most' and the LSB of Buffer/Key[N-1]
+ * is the 'right-most').
+ *
+ * Value = 0
+ * For number of bits in Buffer[]
+ *    If (left-most bit of Buffer[] is 1)
+ *        Value ^= left-most 32 bits of Key[]
+ *    Key[] << 1
+ *    Buffer[] << 1
+ *
+ * The code below is provided for convenience where an operating system
+ * does not already provide an implementation.
+ */
+#ifdef XEN_NETIF_DEFINE_TOEPLITZ
+static uint32_t xen_netif_toeplitz_hash(const uint8_t *key,
+					unsigned int keylen,
+					const uint8_t *buf, unsigned int buflen)
+{
+	unsigned int keyi, bufi;
+	uint64_t prefix = 0;
+	uint64_t hash = 0;
+
+	/* Pre-load prefix with the first 8 bytes of the key */
+	for (keyi = 0; keyi < 8; keyi++) {
+		prefix <<= 8;
+		prefix |= (keyi < keylen) ? key[keyi] : 0;
+	}
+
+	for (bufi = 0; bufi < buflen; bufi++) {
+		uint8_t byte = buf[bufi];
+		unsigned int bit;
+
+		for (bit = 0; bit < 8; bit++) {
+			if (byte & 0x80)
+				hash ^= prefix;
+			prefix <<= 1;
+			byte <<= 1;
+		}
+
+		/*
+		 * 'prefix' has now been left-shifted by 8, so
+		 * OR in the next byte.
+		 */
+		prefix |= (keyi < keylen) ? key[keyi] : 0;
+		keyi++;
+	}
+
+	/* The valid part of the hash is in the upper 32 bits. */
+	return hash >> 32;
+}
+#endif				/* XEN_NETIF_DEFINE_TOEPLITZ */
+
+/*
+ * Control requests (struct xen_netif_ctrl_request)
+ * ================================================
+ *
+ * All requests have the following format:
+ *
+ *    0     1     2     3     4     5     6     7  octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * |    id     |   type    |         data[0]       |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * |         data[1]       |         data[2]       |
+ * +-----+-----+-----+-----+-----------------------+
+ *
+ * id: the request identifier, echoed in response.
+ * type: the type of request (see below)
+ * data[]: any data associated with the request (determined by type)
+ */
+
+struct xen_netif_ctrl_request {
+	uint16_t id;
+	uint16_t type;
+
+#define XEN_NETIF_CTRL_TYPE_INVALID               0
+#define XEN_NETIF_CTRL_TYPE_GET_HASH_FLAGS        1
+#define XEN_NETIF_CTRL_TYPE_SET_HASH_FLAGS        2
+#define XEN_NETIF_CTRL_TYPE_SET_HASH_KEY          3
+#define XEN_NETIF_CTRL_TYPE_GET_HASH_MAPPING_SIZE 4
+#define XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE 5
+#define XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING      6
+#define XEN_NETIF_CTRL_TYPE_SET_HASH_ALGORITHM    7
+
+	uint32_t data[3];
+};
+
+/*
+ * Control responses (struct xen_netif_ctrl_response)
+ * ==================================================
+ *
+ * All responses have the following format:
+ *
+ *    0     1     2     3     4     5     6     7  octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * |    id     |   type    |         status        |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * |         data          |
+ * +-----+-----+-----+-----+
+ *
+ * id: the corresponding request identifier
+ * type: the type of the corresponding request
+ * status: the status of request processing
+ * data: any data associated with the response (determined by type and
+ *       status)
+ */
+
+struct xen_netif_ctrl_response {
+	uint16_t id;
+	uint16_t type;
+	uint32_t status;
+
+#define XEN_NETIF_CTRL_STATUS_SUCCESS           0
+#define XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED     1
+#define XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER 2
+#define XEN_NETIF_CTRL_STATUS_BUFFER_OVERFLOW   3
+
+	uint32_t data;
+};
+
+/*
+ * Control messages
+ * ================
+ *
+ * XEN_NETIF_CTRL_TYPE_SET_HASH_ALGORITHM
+ * --------------------------------------
+ *
+ * This is sent by the frontend to set the desired hash algorithm.
+ *
+ * Request:
+ *
+ *  type    = XEN_NETIF_CTRL_TYPE_SET_HASH_ALGORITHM
+ *  data[0] = a XEN_NETIF_CTRL_HASH_ALGORITHM_* value
+ *  data[1] = 0
+ *  data[2] = 0
+ *
+ * Response:
+ *
+ *  status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED     - Operation not
+ *                                                     supported
+ *           XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - The algorithm is not
+ *                                                     supported
+ *           XEN_NETIF_CTRL_STATUS_SUCCESS           - Operation successful
+ *
+ * NOTE: Setting data[0] to XEN_NETIF_CTRL_HASH_ALGORITHM_NONE disables
+ *       hashing and the backend is free to choose how it steers packets
+ *       to queues (which is the default behaviour).
+ *
+ * XEN_NETIF_CTRL_TYPE_GET_HASH_FLAGS
+ * ----------------------------------
+ *
+ * This is sent by the frontend to query the types of hash supported by
+ * the backend.
+ *
+ * Request:
+ *
+ *  type    = XEN_NETIF_CTRL_TYPE_GET_HASH_FLAGS
+ *  data[0] = 0
+ *  data[1] = 0
+ *  data[2] = 0
+ *
+ * Response:
+ *
+ *  status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not supported
+ *           XEN_NETIF_CTRL_STATUS_SUCCESS       - Operation successful
+ *  data   = supported hash types (if operation was successful)
+ *
+ * NOTE: A valid hash algorithm must be selected before this operation can
+ *       succeed.
+ *
+ * XEN_NETIF_CTRL_TYPE_SET_HASH_FLAGS
+ * ----------------------------------
+ *
+ * This is sent by the frontend to set the types of hash that the backend
+ * should calculate. (See above for hash type definitions).
+ * Note that the 'maximal' type of hash should always be chosen. For
+ * example, if the frontend sets both IPV4 and IPV4_TCP hash types then
+ * the latter hash type should be calculated for any TCP packet and the
+ * former only calculated for non-TCP packets.
+ *
+ * Request:
+ *
+ *  type    = XEN_NETIF_CTRL_TYPE_SET_HASH_FLAGS
+ *  data[0] = bitwise OR of XEN_NETIF_CTRL_HASH_TYPE_* values
+ *  data[1] = 0
+ *  data[2] = 0
+ *
+ * Response:
+ *
+ *  status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED     - Operation not
+ *                                                     supported
+ *           XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - One or more flag
+ *                                                     value is invalid or
+ *                                                     unsupported
+ *           XEN_NETIF_CTRL_STATUS_SUCCESS           - Operation successful
+ *  data   = 0
+ *
+ * NOTE: A valid hash algorithm must be selected before this operation can
+ *       succeed.
+ *       Also, setting data[0] to zero disables hashing and the backend
+ *       is free to choose how it steers packets to queues.
+ *
+ * XEN_NETIF_CTRL_TYPE_SET_HASH_KEY
+ * --------------------------------
+ *
+ * This is sent by the frontend to set the key of the hash if the algorithm
+ * requires it. (See hash algorithms above).
+ *
+ * Request:
+ *
+ *  type    = XEN_NETIF_CTRL_TYPE_SET_HASH_KEY
+ *  data[0] = grant reference of page containing the key (assumed to
+ *            start at beginning of grant)
+ *  data[1] = size of key in octets
+ *  data[2] = 0
+ *
+ * Response:
+ *
+ *  status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED     - Operation not
+ *                                                     supported
+ *           XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - Key size is invalid
+ *           XEN_NETIF_CTRL_STATUS_BUFFER_OVERFLOW   - Key size is larger
+ *                                                     than the backend
+ *                                                     supports
+ *           XEN_NETIF_CTRL_STATUS_SUCCESS           - Operation successful
+ *  data   = 0
+ *
+ * NOTE: Any key octets not specified are assumed to be zero (the key
+ *       is assumed to be empty by default) and specifying a new key
+ *       invalidates any previous key, hence specifying a key size of
+ *       zero will clear the key (which ensures that the calculated hash
+ *       will always be zero).
+ *       The maximum size of key is algorithm and backend specific, but
+ *       is also limited by the single grant reference.
+ *       The grant reference may be read-only and must remain valid until
+ *       the response has been processed.
+ *
+ * XEN_NETIF_CTRL_TYPE_GET_HASH_MAPPING_SIZE
+ * -----------------------------------------
+ *
+ * This is sent by the frontend to query the maximum size of mapping
+ * table supported by the backend. The size is specified in terms of
+ * table entries.
+ *
+ * Request:
+ *
+ *  type    = XEN_NETIF_CTRL_TYPE_GET_HASH_MAPPING_SIZE
+ *  data[0] = 0
+ *  data[1] = 0
+ *  data[2] = 0
+ *
+ * Response:
+ *
+ *  status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not supported
+ *           XEN_NETIF_CTRL_STATUS_SUCCESS       - Operation successful
+ *  data   = maximum number of entries allowed in the mapping table
+ *           (if operation was successful) or zero if a mapping table is
+ *           not supported (i.e. hash mapping is done only by modular
+ *           arithmetic).
+ *
+ * XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE
+ * -------------------------------------
+ *
+ * This is sent by the frontend to set the actual size of the mapping
+ * table to be used by the backend. The size is specified in terms of
+ * table entries.
+ * Any previous table is invalidated by this message and any new table
+ * is assumed to be zero filled.
+ *
+ * Request:
+ *
+ *  type    = XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE
+ *  data[0] = number of entries in mapping table
+ *  data[1] = 0
+ *  data[2] = 0
+ *
+ * Response:
+ *
+ *  status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED     - Operation not
+ *                                                     supported
+ *           XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - Table size is invalid
+ *           XEN_NETIF_CTRL_STATUS_SUCCESS           - Operation successful
+ *  data   = 0
+ *
+ * NOTE: Setting data[0] to 0 means that hash mapping should be done
+ *       using modular arithmetic.
+ *
+ * XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING
+ * ------------------------------------
+ *
+ * This is sent by the frontend to set the content of the table mapping
+ * hash value to queue number. The backend should calculate the hash from
+ * the packet header, use it as an index into the table (modulo the size
+ * of the table) and then steer the packet to the queue number found at
+ * that index.
+ *
+ * Request:
+ *
+ *  type    = XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING
+ *  data[0] = grant reference of page containing the mapping (sub-)table
+ *            (assumed to start at beginning of grant)
+ *  data[1] = size of (sub-)table in entries
+ *  data[2] = offset, in entries, of sub-table within overall table
+ *
+ * Response:
+ *
+ *  status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED     - Operation not
+ *                                                     supported
+ *           XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - Table size or content
+ *                                                     is invalid
+ *           XEN_NETIF_CTRL_STATUS_BUFFER_OVERFLOW   - Table size is larger
+ *                                                     than the backend
+ *                                                     supports
+ *           XEN_NETIF_CTRL_STATUS_SUCCESS           - Operation successful
+ *  data   = 0
+ *
+ * NOTE: The overall table has the following format:
+ *
+ *          0     1     2     3     4     5     6     7  octet
+ *       +-----+-----+-----+-----+-----+-----+-----+-----+
+ *       |       mapping[0]      |       mapping[1]      |
+ *       +-----+-----+-----+-----+-----+-----+-----+-----+
+ *       |                       .                       |
+ *       |                       .                       |
+ *       |                       .                       |
+ *       +-----+-----+-----+-----+-----+-----+-----+-----+
+ *       |      mapping[N-2]     |      mapping[N-1]     |
+ *       +-----+-----+-----+-----+-----+-----+-----+-----+
+ *
+ *       where N is specified by a XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE
+ *       message and each  mapping must specifies a queue between 0 and
+ *       "multi-queue-num-queues" (see above).
+ *       The backend may support a mapping table larger than can be
+ *       mapped by a single grant reference. Thus sub-tables within a
+ *       larger table can be individually set by sending multiple messages
+ *       with differing offset values. Specifying a new sub-table does not
+ *       invalidate any table data outside that range.
+ *       The grant reference may be read-only and must remain valid until
+ *       the response has been processed.
+ */
+
+DEFINE_RING_TYPES(xen_netif_ctrl,
+		  struct xen_netif_ctrl_request,
+		  struct xen_netif_ctrl_response);
+
+/*
+ * Guest transmit
+ * ==============
+ *
+ * This is the 'wire' format for transmit (frontend -> backend) packets:
+ *
+ *  Fragment 1: xen_netif_tx_request_t  - flags = XEN_NETTXF_*
+ *                                    size = total packet size
+ * [Extra 1: xen_netif_extra_info_t]    - (only if fragment 1 flags include
+ *                                     XEN_NETTXF_extra_info)
+ *  ...
+ * [Extra N: xen_netif_extra_info_t]    - (only if extra N-1 flags include
+ *                                     XEN_NETIF_EXTRA_MORE)
+ *  ...
+ *  Fragment N: xen_netif_tx_request_t  - (only if fragment N-1 flags include
+ *                                     XEN_NETTXF_more_data - flags on preceding
+ *                                     extras are not relevant here)
+ *                                    flags = 0
+ *                                    size = fragment size
+ *
+ * NOTE:
+ *
+ * This format slightly is different from that used for receive
+ * (backend -> frontend) packets. Specifically, in a multi-fragment
+ * packet the actual size of fragment 1 can only be determined by
+ * subtracting the sizes of fragments 2..N from the total packet size.
+ *
+ * Ring slot size is 12 octets, however not all request/response
+ * structs use the full size.
+ *
+ * tx request data (xen_netif_tx_request_t)
+ * ------------------------------------
+ *
+ *    0     1     2     3     4     5     6     7  octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | grant ref             | offset    | flags     |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | id        | size      |
+ * +-----+-----+-----+-----+
+ *
+ * grant ref: Reference to buffer page.
+ * offset: Offset within buffer page.
+ * flags: XEN_NETTXF_*.
+ * id: request identifier, echoed in response.
+ * size: packet size in bytes.
+ *
+ * tx response (xen_netif_tx_response_t)
+ * ---------------------------------
+ *
+ *    0     1     2     3     4     5     6     7  octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | id        | status    | unused                |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | unused                |
+ * +-----+-----+-----+-----+
+ *
+ * id: reflects id in transmit request
+ * status: XEN_NETIF_RSP_*
+ *
+ * Guest receive
+ * =============
+ *
+ * This is the 'wire' format for receive (backend -> frontend) packets:
+ *
+ *  Fragment 1: xen_netif_rx_request_t  - flags = XEN_NETRXF_*
+ *                                    size = fragment size
+ * [Extra 1: xen_netif_extra_info_t]    - (only if fragment 1 flags include
+ *                                     XEN_NETRXF_extra_info)
+ *  ...
+ * [Extra N: xen_netif_extra_info_t]    - (only if extra N-1 flags include
+ *                                     XEN_NETIF_EXTRA_MORE)
+ *  ...
+ *  Fragment N: xen_netif_rx_request_t  - (only if fragment N-1 flags include
+ *                                     XEN_NETRXF_more_data - flags on preceding
+ *                                     extras are not relevant here)
+ *                                    flags = 0
+ *                                    size = fragment size
+ *
+ * NOTE:
+ *
+ * This format slightly is different from that used for transmit
+ * (frontend -> backend) packets. Specifically, in a multi-fragment
+ * packet the size of the packet can only be determined by summing the
+ * sizes of fragments 1..N.
+ *
+ * Ring slot size is 8 octets.
+ *
+ * rx request (xen_netif_rx_request_t)
+ * -------------------------------
+ *
+ *    0     1     2     3     4     5     6     7  octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | id        | pad       | gref                  |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ *
+ * id: request identifier, echoed in response.
+ * gref: reference to incoming granted frame.
+ *
+ * rx response (xen_netif_rx_response_t)
+ * ---------------------------------
+ *
+ *    0     1     2     3     4     5     6     7  octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | id        | offset    | flags     | status    |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ *
+ * id: reflects id in receive request
+ * offset: offset in page of start of received packet
+ * flags: XEN_NETRXF_*
+ * status: -ve: XEN_NETIF_RSP_*; +ve: Rx'ed pkt size.
+ *
+ * NOTE: Historically, to support GSO on the frontend receive side, Linux
+ *       netfront does not make use of the rx response id (because, as
+ *       described below, extra info structures overlay the id field).
+ *       Instead it assumes that responses always appear in the same ring
+ *       slot as their corresponding request. Thus, to maintain
+ *       compatibility, backends must make sure this is the case.
+ *
+ * Extra Info
+ * ==========
+ *
+ * Can be present if initial request or response has NET{T,R}XF_extra_info,
+ * or previous extra request has XEN_NETIF_EXTRA_MORE.
+ *
+ * The struct therefore needs to fit into either a tx or rx slot and
+ * is therefore limited to 8 octets.
+ *
+ * NOTE: Because extra info data overlays the usual request/response
+ *       structures, there is no id information in the opposite direction.
+ *       So, if an extra info overlays an rx response the frontend can
+ *       assume that it is in the same ring slot as the request that was
+ *       consumed to make the slot available, and the backend must ensure
+ *       this assumption is true.
+ *
+ * extra info (xen_netif_extra_info_t)
+ * -------------------------------
+ *
+ * General format:
+ *
+ *    0     1     2     3     4     5     6     7  octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * |type |flags| type specific data                |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | padding for tx        |
+ * +-----+-----+-----+-----+
+ *
+ * type: XEN_NETIF_EXTRA_TYPE_*
+ * flags: XEN_NETIF_EXTRA_FLAG_*
+ * padding for tx: present only in the tx case due to 8 octet limit
+ *                 from rx case. Not shown in type specific entries
+ *                 below.
+ *
+ * XEN_NETIF_EXTRA_TYPE_GSO:
+ *
+ *    0     1     2     3     4     5     6     7  octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * |type |flags| size      |type | pad | features  |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ *
+ * type: Must be XEN_NETIF_EXTRA_TYPE_GSO
+ * flags: XEN_NETIF_EXTRA_FLAG_*
+ * size: Maximum payload size of each segment. For example,
+ *       for TCP this is just the path MSS.
+ * type: XEN_NETIF_GSO_TYPE_*: This determines the protocol of
+ *       the packet and any extra features required to segment the
+ *       packet properly.
+ * features: EN_XEN_NETIF_GSO_FEAT_*: This specifies any extra GSO
+ *           features required to process this packet, such as ECN
+ *           support for TCPv4.
+ *
+ * XEN_NETIF_EXTRA_TYPE_MCAST_{ADD,DEL}:
+ *
+ *    0     1     2     3     4     5     6     7  octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * |type |flags| addr                              |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ *
+ * type: Must be XEN_NETIF_EXTRA_TYPE_MCAST_{ADD,DEL}
+ * flags: XEN_NETIF_EXTRA_FLAG_*
+ * addr: address to add/remove
+ *
+ * XEN_NETIF_EXTRA_TYPE_HASH:
+ *
+ * A backend that supports teoplitz hashing is assumed to accept
+ * this type of extra info in transmit packets.
+ * A frontend that enables hashing is assumed to accept
+ * this type of extra info in receive packets.
+ *
+ *    0     1     2     3     4     5     6     7  octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * |type |flags|htype| alg |LSB ---- value ---- MSB|
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ *
+ * type: Must be XEN_NETIF_EXTRA_TYPE_HASH
+ * flags: XEN_NETIF_EXTRA_FLAG_*
+ * htype: Hash type (one of _XEN_NETIF_CTRL_HASH_TYPE_* - see above)
+ * alg: The algorithm used to calculate the hash (one of
+ *      XEN_NETIF_CTRL_HASH_TYPE_ALGORITHM_* - see above)
+ * value: Hash value
+ */
+
+/* Protocol checksum field is blank in the packet (hardware offload)? */
+#define _XEN_NETTXF_csum_blank     (0)
+#define  XEN_NETTXF_csum_blank     (1U<<_XEN_NETTXF_csum_blank)
+
+/* Packet data has been validated against protocol checksum. */
+#define _XEN_NETTXF_data_validated (1)
+#define  XEN_NETTXF_data_validated (1U<<_XEN_NETTXF_data_validated)
+
+/* Packet continues in the next request descriptor. */
+#define _XEN_NETTXF_more_data      (2)
+#define  XEN_NETTXF_more_data      (1U<<_XEN_NETTXF_more_data)
+
+/* Packet to be followed by extra descriptor(s). */
+#define _XEN_NETTXF_extra_info     (3)
+#define  XEN_NETTXF_extra_info     (1U<<_XEN_NETTXF_extra_info)
+
+#define XEN_NETIF_MAX_TX_SIZE 0xFFFF
+struct xen_netif_tx_request {
+	grant_ref_t gref;
+	uint16_t offset;
+	uint16_t flags;
+	uint16_t id;
+	uint16_t size;
+};
+
+/* Types of xen_netif_extra_info descriptors. */
+#define XEN_NETIF_EXTRA_TYPE_NONE      (0)	/* Never used - invalid */
+#define XEN_NETIF_EXTRA_TYPE_GSO       (1)	/* u.gso */
+#define XEN_NETIF_EXTRA_TYPE_MCAST_ADD (2)	/* u.mcast */
+#define XEN_NETIF_EXTRA_TYPE_MCAST_DEL (3)	/* u.mcast */
+#define XEN_NETIF_EXTRA_TYPE_HASH      (4)	/* u.hash */
+#define XEN_NETIF_EXTRA_TYPE_XDP       (5)	/* u.xdp */
+#define XEN_NETIF_EXTRA_TYPE_MAX       (6)
+
+/* xen_netif_extra_info_t flags. */
+#define _XEN_NETIF_EXTRA_FLAG_MORE (0)
+#define XEN_NETIF_EXTRA_FLAG_MORE  (1U<<_XEN_NETIF_EXTRA_FLAG_MORE)
+
+/* GSO types */
+#define XEN_NETIF_GSO_TYPE_NONE         (0)
+#define XEN_NETIF_GSO_TYPE_TCPV4        (1)
+#define XEN_NETIF_GSO_TYPE_TCPV6        (2)
+
+/*
+ * This structure needs to fit within both xen_netif_tx_request_t and
+ * xen_netif_rx_response_t for compatibility.
+ */
+struct xen_netif_extra_info {
+	uint8_t type;
+	uint8_t flags;
+	union {
+		struct {
+			uint16_t size;
+			uint8_t type;
+			uint8_t pad;
+			uint16_t features;
+		} gso;
+		struct {
+			uint8_t addr[6];
+		} mcast;
+		struct {
+			uint8_t type;
+			uint8_t algorithm;
+			uint8_t value[4];
+		} hash;
+		struct {
+			uint16_t headroom;
+			uint16_t pad[2];
+		} xdp;
+		uint16_t pad[3];
+	} u;
+};
+
+struct xen_netif_tx_response {
+	uint16_t id;
+	int16_t status;
+};
+
+struct xen_netif_rx_request {
+	uint16_t id;		/* Echoed in response message.        */
+	uint16_t pad;
+	grant_ref_t gref;
+};
+
+/* Packet data has been validated against protocol checksum. */
+#define _XEN_NETRXF_data_validated (0)
+#define  XEN_NETRXF_data_validated (1U<<_XEN_NETRXF_data_validated)
+
+/* Protocol checksum field is blank in the packet (hardware offload)? */
+#define _XEN_NETRXF_csum_blank     (1)
+#define  XEN_NETRXF_csum_blank     (1U<<_XEN_NETRXF_csum_blank)
+
+/* Packet continues in the next request descriptor. */
+#define _XEN_NETRXF_more_data      (2)
+#define  XEN_NETRXF_more_data      (1U<<_XEN_NETRXF_more_data)
+
+/* Packet to be followed by extra descriptor(s). */
+#define _XEN_NETRXF_extra_info     (3)
+#define  XEN_NETRXF_extra_info     (1U<<_XEN_NETRXF_extra_info)
+
+/* Packet has GSO prefix. Deprecated but included for compatibility */
+#define _XEN_NETRXF_gso_prefix     (4)
+#define  XEN_NETRXF_gso_prefix     (1U<<_XEN_NETRXF_gso_prefix)
+
+struct xen_netif_rx_response {
+	uint16_t id;
+	uint16_t offset;
+	uint16_t flags;
+	int16_t status;
+};
+
+/*
+ * Generate xen_netif ring structures and types.
+ */
+
+DEFINE_RING_TYPES(xen_netif_tx, struct xen_netif_tx_request,
+		  struct xen_netif_tx_response);
+DEFINE_RING_TYPES(xen_netif_rx, struct xen_netif_rx_request,
+		  struct xen_netif_rx_response);
+
+#define XEN_NETIF_RSP_DROPPED         -2
+#define XEN_NETIF_RSP_ERROR           -1
+#define XEN_NETIF_RSP_OKAY             0
+/* No response: used for auxiliary requests (e.g., xen_netif_extra_info_t). */
+#define XEN_NETIF_RSP_NULL             1
+
+#endif
diff --git a/include/xen/interface/io/pciif.h b/include/xen/interface/io/pciif.h
new file mode 100644
index 000000000..d1a87b62d
--- /dev/null
+++ b/include/xen/interface/io/pciif.h
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * PCI Backend/Frontend Common Data Structures & Macros
+ *
+ *   Author: Ryan Wilson <hap9@epoch.ncsc.mil>
+ */
+#ifndef __XEN_PCI_COMMON_H__
+#define __XEN_PCI_COMMON_H__
+
+/* Be sure to bump this number if you change this file */
+#define XEN_PCI_MAGIC "7"
+
+/* xen_pci_sharedinfo flags */
+#define	_XEN_PCIF_active		(0)
+#define	XEN_PCIF_active			(1<<_XEN_PCIF_active)
+#define	_XEN_PCIB_AERHANDLER		(1)
+#define	XEN_PCIB_AERHANDLER		(1<<_XEN_PCIB_AERHANDLER)
+#define	_XEN_PCIB_active		(2)
+#define	XEN_PCIB_active			(1<<_XEN_PCIB_active)
+
+/* xen_pci_op commands */
+#define	XEN_PCI_OP_conf_read		(0)
+#define	XEN_PCI_OP_conf_write		(1)
+#define	XEN_PCI_OP_enable_msi		(2)
+#define	XEN_PCI_OP_disable_msi		(3)
+#define	XEN_PCI_OP_enable_msix		(4)
+#define	XEN_PCI_OP_disable_msix		(5)
+#define	XEN_PCI_OP_aer_detected		(6)
+#define	XEN_PCI_OP_aer_resume		(7)
+#define	XEN_PCI_OP_aer_mmio		(8)
+#define	XEN_PCI_OP_aer_slotreset	(9)
+
+/* xen_pci_op error numbers */
+#define	XEN_PCI_ERR_success		(0)
+#define	XEN_PCI_ERR_dev_not_found	(-1)
+#define	XEN_PCI_ERR_invalid_offset	(-2)
+#define	XEN_PCI_ERR_access_denied	(-3)
+#define	XEN_PCI_ERR_not_implemented	(-4)
+/* XEN_PCI_ERR_op_failed - backend failed to complete the operation */
+#define XEN_PCI_ERR_op_failed		(-5)
+
+/*
+ * it should be PAGE_SIZE-sizeof(struct xen_pci_op))/sizeof(struct msix_entry))
+ * Should not exceed 128
+ */
+#define SH_INFO_MAX_VEC			128
+
+struct xen_msix_entry {
+	uint16_t vector;
+	uint16_t entry;
+};
+struct xen_pci_op {
+	/* IN: what action to perform: XEN_PCI_OP_* */
+	uint32_t cmd;
+
+	/* OUT: will contain an error number (if any) from errno.h */
+	int32_t err;
+
+	/* IN: which device to touch */
+	uint32_t domain; /* PCI Domain/Segment */
+	uint32_t bus;
+	uint32_t devfn;
+
+	/* IN: which configuration registers to touch */
+	int32_t offset;
+	int32_t size;
+
+	/* IN/OUT: Contains the result after a READ or the value to WRITE */
+	uint32_t value;
+	/* IN: Contains extra infor for this operation */
+	uint32_t info;
+	/*IN:  param for msi-x */
+	struct xen_msix_entry msix_entries[SH_INFO_MAX_VEC];
+};
+
+/*used for pcie aer handling*/
+struct xen_pcie_aer_op {
+	/* IN: what action to perform: XEN_PCI_OP_* */
+	uint32_t cmd;
+	/*IN/OUT: return aer_op result or carry error_detected state as input*/
+	int32_t err;
+
+	/* IN: which device to touch */
+	uint32_t domain; /* PCI Domain/Segment*/
+	uint32_t bus;
+	uint32_t devfn;
+};
+struct xen_pci_sharedinfo {
+	/* flags - XEN_PCIF_* */
+	uint32_t flags;
+	struct xen_pci_op op;
+	struct xen_pcie_aer_op aer_op;
+};
+
+#endif /* __XEN_PCI_COMMON_H__ */
diff --git a/include/xen/interface/io/protocols.h b/include/xen/interface/io/protocols.h
new file mode 100644
index 000000000..22099bb40
--- /dev/null
+++ b/include/xen/interface/io/protocols.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: MIT */
+#ifndef __XEN_PROTOCOLS_H__
+#define __XEN_PROTOCOLS_H__
+
+#define XEN_IO_PROTO_ABI_X86_32     "x86_32-abi"
+#define XEN_IO_PROTO_ABI_X86_64     "x86_64-abi"
+#define XEN_IO_PROTO_ABI_POWERPC64  "powerpc64-abi"
+#define XEN_IO_PROTO_ABI_ARM        "arm-abi"
+
+#if defined(__i386__)
+# define XEN_IO_PROTO_ABI_NATIVE XEN_IO_PROTO_ABI_X86_32
+#elif defined(__x86_64__)
+# define XEN_IO_PROTO_ABI_NATIVE XEN_IO_PROTO_ABI_X86_64
+#elif defined(__powerpc64__)
+# define XEN_IO_PROTO_ABI_NATIVE XEN_IO_PROTO_ABI_POWERPC64
+#elif defined(__arm__) || defined(__aarch64__)
+# define XEN_IO_PROTO_ABI_NATIVE XEN_IO_PROTO_ABI_ARM
+#else
+# error arch fixup needed here
+#endif
+
+#endif
diff --git a/include/xen/interface/io/pvcalls.h b/include/xen/interface/io/pvcalls.h
new file mode 100644
index 000000000..b6680fdbe
--- /dev/null
+++ b/include/xen/interface/io/pvcalls.h
@@ -0,0 +1,123 @@
+/* SPDX-License-Identifier: MIT */
+
+#ifndef __XEN_PUBLIC_IO_XEN_PVCALLS_H__
+#define __XEN_PUBLIC_IO_XEN_PVCALLS_H__
+
+#include <linux/net.h>
+#include <xen/interface/io/ring.h>
+#include <xen/interface/grant_table.h>
+
+/* "1" means socket, connect, release, bind, listen, accept and poll */
+#define XENBUS_FUNCTIONS_CALLS "1"
+
+/*
+ * See docs/misc/pvcalls.markdown in xen.git for the full specification:
+ * https://xenbits.xen.org/docs/unstable/misc/pvcalls.html
+ */
+struct pvcalls_data_intf {
+    RING_IDX in_cons, in_prod, in_error;
+
+    uint8_t pad1[52];
+
+    RING_IDX out_cons, out_prod, out_error;
+
+    uint8_t pad2[52];
+
+    RING_IDX ring_order;
+    grant_ref_t ref[];
+};
+DEFINE_XEN_FLEX_RING(pvcalls);
+
+#define PVCALLS_SOCKET         0
+#define PVCALLS_CONNECT        1
+#define PVCALLS_RELEASE        2
+#define PVCALLS_BIND           3
+#define PVCALLS_LISTEN         4
+#define PVCALLS_ACCEPT         5
+#define PVCALLS_POLL           6
+
+struct xen_pvcalls_request {
+    uint32_t req_id; /* private to guest, echoed in response */
+    uint32_t cmd;    /* command to execute */
+    union {
+        struct xen_pvcalls_socket {
+            uint64_t id;
+            uint32_t domain;
+            uint32_t type;
+            uint32_t protocol;
+        } socket;
+        struct xen_pvcalls_connect {
+            uint64_t id;
+            uint8_t addr[28];
+            uint32_t len;
+            uint32_t flags;
+            grant_ref_t ref;
+            uint32_t evtchn;
+        } connect;
+        struct xen_pvcalls_release {
+            uint64_t id;
+            uint8_t reuse;
+        } release;
+        struct xen_pvcalls_bind {
+            uint64_t id;
+            uint8_t addr[28];
+            uint32_t len;
+        } bind;
+        struct xen_pvcalls_listen {
+            uint64_t id;
+            uint32_t backlog;
+        } listen;
+        struct xen_pvcalls_accept {
+            uint64_t id;
+            uint64_t id_new;
+            grant_ref_t ref;
+            uint32_t evtchn;
+        } accept;
+        struct xen_pvcalls_poll {
+            uint64_t id;
+        } poll;
+        /* dummy member to force sizeof(struct xen_pvcalls_request)
+         * to match across archs */
+        struct xen_pvcalls_dummy {
+            uint8_t dummy[56];
+        } dummy;
+    } u;
+};
+
+struct xen_pvcalls_response {
+    uint32_t req_id;
+    uint32_t cmd;
+    int32_t ret;
+    uint32_t pad;
+    union {
+        struct _xen_pvcalls_socket {
+            uint64_t id;
+        } socket;
+        struct _xen_pvcalls_connect {
+            uint64_t id;
+        } connect;
+        struct _xen_pvcalls_release {
+            uint64_t id;
+        } release;
+        struct _xen_pvcalls_bind {
+            uint64_t id;
+        } bind;
+        struct _xen_pvcalls_listen {
+            uint64_t id;
+        } listen;
+        struct _xen_pvcalls_accept {
+            uint64_t id;
+        } accept;
+        struct _xen_pvcalls_poll {
+            uint64_t id;
+        } poll;
+        struct _xen_pvcalls_dummy {
+            uint8_t dummy[8];
+        } dummy;
+    } u;
+};
+
+DEFINE_RING_TYPES(xen_pvcalls, struct xen_pvcalls_request,
+                  struct xen_pvcalls_response);
+
+#endif
diff --git a/include/xen/interface/io/ring.h b/include/xen/interface/io/ring.h
new file mode 100644
index 000000000..ba4c4274b
--- /dev/null
+++ b/include/xen/interface/io/ring.h
@@ -0,0 +1,447 @@
+/* SPDX-License-Identifier: MIT */
+/******************************************************************************
+ * ring.h
+ *
+ * Shared producer-consumer ring macros.
+ *
+ * Tim Deegan and Andrew Warfield November 2004.
+ */
+
+#ifndef __XEN_PUBLIC_IO_RING_H__
+#define __XEN_PUBLIC_IO_RING_H__
+
+/*
+ * When #include'ing this header, you need to provide the following
+ * declaration upfront:
+ * - standard integers types (uint8_t, uint16_t, etc)
+ * They are provided by stdint.h of the standard headers.
+ *
+ * In addition, if you intend to use the FLEX macros, you also need to
+ * provide the following, before invoking the FLEX macros:
+ * - size_t
+ * - memcpy
+ * - grant_ref_t
+ * These declarations are provided by string.h of the standard headers,
+ * and grant_table.h from the Xen public headers.
+ */
+
+#include <xen/interface/grant_table.h>
+
+typedef unsigned int RING_IDX;
+
+/* Round a 32-bit unsigned constant down to the nearest power of two. */
+#define __RD2(_x)  (((_x) & 0x00000002) ? 0x2                  : ((_x) & 0x1))
+#define __RD4(_x)  (((_x) & 0x0000000c) ? __RD2((_x)>>2)<<2    : __RD2(_x))
+#define __RD8(_x)  (((_x) & 0x000000f0) ? __RD4((_x)>>4)<<4    : __RD4(_x))
+#define __RD16(_x) (((_x) & 0x0000ff00) ? __RD8((_x)>>8)<<8    : __RD8(_x))
+#define __RD32(_x) (((_x) & 0xffff0000) ? __RD16((_x)>>16)<<16 : __RD16(_x))
+
+/*
+ * Calculate size of a shared ring, given the total available space for the
+ * ring and indexes (_sz), and the name tag of the request/response structure.
+ * A ring contains as many entries as will fit, rounded down to the nearest
+ * power of two (so we can mask with (size-1) to loop around).
+ */
+#define __CONST_RING_SIZE(_s, _sz) \
+    (__RD32(((_sz) - offsetof(struct _s##_sring, ring)) / \
+	    sizeof(((struct _s##_sring *)0)->ring[0])))
+/*
+ * The same for passing in an actual pointer instead of a name tag.
+ */
+#define __RING_SIZE(_s, _sz) \
+    (__RD32(((_sz) - (long)(_s)->ring + (long)(_s)) / sizeof((_s)->ring[0])))
+
+/*
+ * Macros to make the correct C datatypes for a new kind of ring.
+ *
+ * To make a new ring datatype, you need to have two message structures,
+ * let's say request_t, and response_t already defined.
+ *
+ * In a header where you want the ring datatype declared, you then do:
+ *
+ *     DEFINE_RING_TYPES(mytag, request_t, response_t);
+ *
+ * These expand out to give you a set of types, as you can see below.
+ * The most important of these are:
+ *
+ *     mytag_sring_t      - The shared ring.
+ *     mytag_front_ring_t - The 'front' half of the ring.
+ *     mytag_back_ring_t  - The 'back' half of the ring.
+ *
+ * To initialize a ring in your code you need to know the location and size
+ * of the shared memory area (PAGE_SIZE, for instance). To initialise
+ * the front half:
+ *
+ *     mytag_front_ring_t ring;
+ *     XEN_FRONT_RING_INIT(&ring, (mytag_sring_t *)shared_page, PAGE_SIZE);
+ *
+ * Initializing the back follows similarly (note that only the front
+ * initializes the shared ring):
+ *
+ *     mytag_back_ring_t back_ring;
+ *     BACK_RING_INIT(&back_ring, (mytag_sring_t *)shared_page, PAGE_SIZE);
+ */
+
+#define DEFINE_RING_TYPES(__name, __req_t, __rsp_t)                     \
+                                                                        \
+/* Shared ring entry */                                                 \
+union __name##_sring_entry {                                            \
+    __req_t req;                                                        \
+    __rsp_t rsp;                                                        \
+};                                                                      \
+                                                                        \
+/* Shared ring page */                                                  \
+struct __name##_sring {                                                 \
+    RING_IDX req_prod, req_event;                                       \
+    RING_IDX rsp_prod, rsp_event;                                       \
+    uint8_t __pad[48];                                                  \
+    union __name##_sring_entry ring[1]; /* variable-length */           \
+};                                                                      \
+                                                                        \
+/* "Front" end's private variables */                                   \
+struct __name##_front_ring {                                            \
+    RING_IDX req_prod_pvt;                                              \
+    RING_IDX rsp_cons;                                                  \
+    unsigned int nr_ents;                                               \
+    struct __name##_sring *sring;                                       \
+};                                                                      \
+                                                                        \
+/* "Back" end's private variables */                                    \
+struct __name##_back_ring {                                             \
+    RING_IDX rsp_prod_pvt;                                              \
+    RING_IDX req_cons;                                                  \
+    unsigned int nr_ents;                                               \
+    struct __name##_sring *sring;                                       \
+};                                                                      \
+                                                                        \
+/*
+ * Macros for manipulating rings.
+ *
+ * FRONT_RING_whatever works on the "front end" of a ring: here
+ * requests are pushed on to the ring and responses taken off it.
+ *
+ * BACK_RING_whatever works on the "back end" of a ring: here
+ * requests are taken off the ring and responses put on.
+ *
+ * N.B. these macros do NO INTERLOCKS OR FLOW CONTROL.
+ * This is OK in 1-for-1 request-response situations where the
+ * requestor (front end) never has more than RING_SIZE()-1
+ * outstanding requests.
+ */
+
+/* Initialising empty rings */
+#define SHARED_RING_INIT(_s) do {                                       \
+    (_s)->req_prod  = (_s)->rsp_prod  = 0;                              \
+    (_s)->req_event = (_s)->rsp_event = 1;                              \
+    (void)memset((_s)->__pad, 0, sizeof((_s)->__pad));                  \
+} while(0)
+
+#define FRONT_RING_ATTACH(_r, _s, _i, __size) do {                      \
+    (_r)->req_prod_pvt = (_i);                                          \
+    (_r)->rsp_cons = (_i);                                              \
+    (_r)->nr_ents = __RING_SIZE(_s, __size);                            \
+    (_r)->sring = (_s);                                                 \
+} while (0)
+
+#define FRONT_RING_INIT(_r, _s, __size) FRONT_RING_ATTACH(_r, _s, 0, __size)
+
+#define XEN_FRONT_RING_INIT(r, s, size) do {                            \
+    SHARED_RING_INIT(s);                                                \
+    FRONT_RING_INIT(r, s, size);                                        \
+} while (0)
+
+#define BACK_RING_ATTACH(_r, _s, _i, __size) do {                       \
+    (_r)->rsp_prod_pvt = (_i);                                          \
+    (_r)->req_cons = (_i);                                              \
+    (_r)->nr_ents = __RING_SIZE(_s, __size);                            \
+    (_r)->sring = (_s);                                                 \
+} while (0)
+
+#define BACK_RING_INIT(_r, _s, __size) BACK_RING_ATTACH(_r, _s, 0, __size)
+
+/* How big is this ring? */
+#define RING_SIZE(_r)                                                   \
+    ((_r)->nr_ents)
+
+/* Number of free requests (for use on front side only). */
+#define RING_FREE_REQUESTS(_r)                                          \
+    (RING_SIZE(_r) - ((_r)->req_prod_pvt - (_r)->rsp_cons))
+
+/* Test if there is an empty slot available on the front ring.
+ * (This is only meaningful from the front. )
+ */
+#define RING_FULL(_r)                                                   \
+    (RING_FREE_REQUESTS(_r) == 0)
+
+/* Test if there are outstanding messages to be processed on a ring. */
+#define XEN_RING_NR_UNCONSUMED_RESPONSES(_r)                            \
+    ((_r)->sring->rsp_prod - (_r)->rsp_cons)
+
+#define XEN_RING_NR_UNCONSUMED_REQUESTS(_r) ({                          \
+    unsigned int req = (_r)->sring->req_prod - (_r)->req_cons;          \
+    unsigned int rsp = RING_SIZE(_r) -                                  \
+        ((_r)->req_cons - (_r)->rsp_prod_pvt);                          \
+    req < rsp ? req : rsp;                                              \
+})
+
+#define RING_HAS_UNCONSUMED_RESPONSES(_r) \
+    (!!XEN_RING_NR_UNCONSUMED_RESPONSES(_r))
+#define RING_HAS_UNCONSUMED_REQUESTS(_r)  \
+    (!!XEN_RING_NR_UNCONSUMED_REQUESTS(_r))
+
+/* Direct access to individual ring elements, by index. */
+#define RING_GET_REQUEST(_r, _idx)                                      \
+    (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].req))
+
+#define RING_GET_RESPONSE(_r, _idx)                                     \
+    (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].rsp))
+
+/*
+ * Get a local copy of a request/response.
+ *
+ * Use this in preference to RING_GET_{REQUEST,RESPONSE}() so all processing is
+ * done on a local copy that cannot be modified by the other end.
+ *
+ * Note that https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145 may cause this
+ * to be ineffective where dest is a struct which consists of only bitfields.
+ */
+#define RING_COPY_(type, r, idx, dest) do {				\
+	/* Use volatile to force the copy into dest. */			\
+	*(dest) = *(volatile typeof(dest))RING_GET_##type(r, idx);	\
+} while (0)
+
+#define RING_COPY_REQUEST(r, idx, req)  RING_COPY_(REQUEST, r, idx, req)
+#define RING_COPY_RESPONSE(r, idx, rsp) RING_COPY_(RESPONSE, r, idx, rsp)
+
+/* Loop termination condition: Would the specified index overflow the ring? */
+#define RING_REQUEST_CONS_OVERFLOW(_r, _cons)                           \
+    (((_cons) - (_r)->rsp_prod_pvt) >= RING_SIZE(_r))
+
+/* Ill-behaved frontend determination: Can there be this many requests? */
+#define RING_REQUEST_PROD_OVERFLOW(_r, _prod)                           \
+    (((_prod) - (_r)->rsp_prod_pvt) > RING_SIZE(_r))
+
+/* Ill-behaved backend determination: Can there be this many responses? */
+#define RING_RESPONSE_PROD_OVERFLOW(_r, _prod)                          \
+    (((_prod) - (_r)->rsp_cons) > RING_SIZE(_r))
+
+#define RING_PUSH_REQUESTS(_r) do {                                     \
+    virt_wmb(); /* back sees requests /before/ updated producer index */\
+    (_r)->sring->req_prod = (_r)->req_prod_pvt;                         \
+} while (0)
+
+#define RING_PUSH_RESPONSES(_r) do {                                    \
+    virt_wmb(); /* front sees resps /before/ updated producer index */  \
+    (_r)->sring->rsp_prod = (_r)->rsp_prod_pvt;                         \
+} while (0)
+
+/*
+ * Notification hold-off (req_event and rsp_event):
+ *
+ * When queueing requests or responses on a shared ring, it may not always be
+ * necessary to notify the remote end. For example, if requests are in flight
+ * in a backend, the front may be able to queue further requests without
+ * notifying the back (if the back checks for new requests when it queues
+ * responses).
+ *
+ * When enqueuing requests or responses:
+ *
+ *  Use RING_PUSH_{REQUESTS,RESPONSES}_AND_CHECK_NOTIFY(). The second argument
+ *  is a boolean return value. True indicates that the receiver requires an
+ *  asynchronous notification.
+ *
+ * After dequeuing requests or responses (before sleeping the connection):
+ *
+ *  Use RING_FINAL_CHECK_FOR_REQUESTS() or RING_FINAL_CHECK_FOR_RESPONSES().
+ *  The second argument is a boolean return value. True indicates that there
+ *  are pending messages on the ring (i.e., the connection should not be put
+ *  to sleep).
+ *
+ *  These macros will set the req_event/rsp_event field to trigger a
+ *  notification on the very next message that is enqueued. If you want to
+ *  create batches of work (i.e., only receive a notification after several
+ *  messages have been enqueued) then you will need to create a customised
+ *  version of the FINAL_CHECK macro in your own code, which sets the event
+ *  field appropriately.
+ */
+
+#define RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(_r, _notify) do {           \
+    RING_IDX __old = (_r)->sring->req_prod;                             \
+    RING_IDX __new = (_r)->req_prod_pvt;                                \
+    virt_wmb(); /* back sees requests /before/ updated producer index */\
+    (_r)->sring->req_prod = __new;                                      \
+    virt_mb(); /* back sees new requests /before/ we check req_event */ \
+    (_notify) = ((RING_IDX)(__new - (_r)->sring->req_event) <           \
+                 (RING_IDX)(__new - __old));                            \
+} while (0)
+
+#define RING_PUSH_RESPONSES_AND_CHECK_NOTIFY(_r, _notify) do {          \
+    RING_IDX __old = (_r)->sring->rsp_prod;                             \
+    RING_IDX __new = (_r)->rsp_prod_pvt;                                \
+    virt_wmb(); /* front sees resps /before/ updated producer index */  \
+    (_r)->sring->rsp_prod = __new;                                      \
+    virt_mb(); /* front sees new resps /before/ we check rsp_event */   \
+    (_notify) = ((RING_IDX)(__new - (_r)->sring->rsp_event) <           \
+                 (RING_IDX)(__new - __old));                            \
+} while (0)
+
+#define RING_FINAL_CHECK_FOR_REQUESTS(_r, _work_to_do) do {             \
+    (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r);                   \
+    if (_work_to_do) break;                                             \
+    (_r)->sring->req_event = (_r)->req_cons + 1;                        \
+    virt_mb();                                                          \
+    (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r);                   \
+} while (0)
+
+#define RING_FINAL_CHECK_FOR_RESPONSES(_r, _work_to_do) do {            \
+    (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r);                  \
+    if (_work_to_do) break;                                             \
+    (_r)->sring->rsp_event = (_r)->rsp_cons + 1;                        \
+    virt_mb();                                                          \
+    (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r);                  \
+} while (0)
+
+
+/*
+ * DEFINE_XEN_FLEX_RING_AND_INTF defines two monodirectional rings and
+ * functions to check if there is data on the ring, and to read and
+ * write to them.
+ *
+ * DEFINE_XEN_FLEX_RING is similar to DEFINE_XEN_FLEX_RING_AND_INTF, but
+ * does not define the indexes page. As different protocols can have
+ * extensions to the basic format, this macro allow them to define their
+ * own struct.
+ *
+ * XEN_FLEX_RING_SIZE
+ *   Convenience macro to calculate the size of one of the two rings
+ *   from the overall order.
+ *
+ * $NAME_mask
+ *   Function to apply the size mask to an index, to reduce the index
+ *   within the range [0-size].
+ *
+ * $NAME_read_packet
+ *   Function to read data from the ring. The amount of data to read is
+ *   specified by the "size" argument.
+ *
+ * $NAME_write_packet
+ *   Function to write data to the ring. The amount of data to write is
+ *   specified by the "size" argument.
+ *
+ * $NAME_get_ring_ptr
+ *   Convenience function that returns a pointer to read/write to the
+ *   ring at the right location.
+ *
+ * $NAME_data_intf
+ *   Indexes page, shared between frontend and backend. It also
+ *   contains the array of grant refs.
+ *
+ * $NAME_queued
+ *   Function to calculate how many bytes are currently on the ring,
+ *   ready to be read. It can also be used to calculate how much free
+ *   space is currently on the ring (XEN_FLEX_RING_SIZE() -
+ *   $NAME_queued()).
+ */
+
+#ifndef XEN_PAGE_SHIFT
+/* The PAGE_SIZE for ring protocols and hypercall interfaces is always
+ * 4K, regardless of the architecture, and page granularity chosen by
+ * operating systems.
+ */
+#define XEN_PAGE_SHIFT 12
+#endif
+#define XEN_FLEX_RING_SIZE(order)                                             \
+    (1UL << ((order) + XEN_PAGE_SHIFT - 1))
+
+#define DEFINE_XEN_FLEX_RING(name)                                            \
+static inline RING_IDX name##_mask(RING_IDX idx, RING_IDX ring_size)          \
+{                                                                             \
+    return idx & (ring_size - 1);                                             \
+}                                                                             \
+                                                                              \
+static inline unsigned char *name##_get_ring_ptr(unsigned char *buf,          \
+                                                 RING_IDX idx,                \
+                                                 RING_IDX ring_size)          \
+{                                                                             \
+    return buf + name##_mask(idx, ring_size);                                 \
+}                                                                             \
+                                                                              \
+static inline void name##_read_packet(void *opaque,                           \
+                                      const unsigned char *buf,               \
+                                      size_t size,                            \
+                                      RING_IDX masked_prod,                   \
+                                      RING_IDX *masked_cons,                  \
+                                      RING_IDX ring_size)                     \
+{                                                                             \
+    if (*masked_cons < masked_prod ||                                         \
+        size <= ring_size - *masked_cons) {                                   \
+        memcpy(opaque, buf + *masked_cons, size);                             \
+    } else {                                                                  \
+        memcpy(opaque, buf + *masked_cons, ring_size - *masked_cons);         \
+        memcpy((unsigned char *)opaque + ring_size - *masked_cons, buf,       \
+               size - (ring_size - *masked_cons));                            \
+    }                                                                         \
+    *masked_cons = name##_mask(*masked_cons + size, ring_size);               \
+}                                                                             \
+                                                                              \
+static inline void name##_write_packet(unsigned char *buf,                    \
+                                       const void *opaque,                    \
+                                       size_t size,                           \
+                                       RING_IDX *masked_prod,                 \
+                                       RING_IDX masked_cons,                  \
+                                       RING_IDX ring_size)                    \
+{                                                                             \
+    if (*masked_prod < masked_cons ||                                         \
+        size <= ring_size - *masked_prod) {                                   \
+        memcpy(buf + *masked_prod, opaque, size);                             \
+    } else {                                                                  \
+        memcpy(buf + *masked_prod, opaque, ring_size - *masked_prod);         \
+        memcpy(buf, (unsigned char *)opaque + (ring_size - *masked_prod),     \
+               size - (ring_size - *masked_prod));                            \
+    }                                                                         \
+    *masked_prod = name##_mask(*masked_prod + size, ring_size);               \
+}                                                                             \
+                                                                              \
+static inline RING_IDX name##_queued(RING_IDX prod,                           \
+                                     RING_IDX cons,                           \
+                                     RING_IDX ring_size)                      \
+{                                                                             \
+    RING_IDX size;                                                            \
+                                                                              \
+    if (prod == cons)                                                         \
+        return 0;                                                             \
+                                                                              \
+    prod = name##_mask(prod, ring_size);                                      \
+    cons = name##_mask(cons, ring_size);                                      \
+                                                                              \
+    if (prod == cons)                                                         \
+        return ring_size;                                                     \
+                                                                              \
+    if (prod > cons)                                                          \
+        size = prod - cons;                                                   \
+    else                                                                      \
+        size = ring_size - (cons - prod);                                     \
+    return size;                                                              \
+}                                                                             \
+                                                                              \
+struct name##_data {                                                          \
+    unsigned char *in; /* half of the allocation */                           \
+    unsigned char *out; /* half of the allocation */                          \
+}
+
+#define DEFINE_XEN_FLEX_RING_AND_INTF(name)                                   \
+struct name##_data_intf {                                                     \
+    RING_IDX in_cons, in_prod;                                                \
+                                                                              \
+    uint8_t pad1[56];                                                         \
+                                                                              \
+    RING_IDX out_cons, out_prod;                                              \
+                                                                              \
+    uint8_t pad2[56];                                                         \
+                                                                              \
+    RING_IDX ring_order;                                                      \
+    grant_ref_t ref[];                                                        \
+};                                                                            \
+DEFINE_XEN_FLEX_RING(name)
+
+#endif /* __XEN_PUBLIC_IO_RING_H__ */
diff --git a/include/xen/interface/io/sndif.h b/include/xen/interface/io/sndif.h
new file mode 100644
index 000000000..445657cdb
--- /dev/null
+++ b/include/xen/interface/io/sndif.h
@@ -0,0 +1,1064 @@
+/* SPDX-License-Identifier: MIT */
+/******************************************************************************
+ * sndif.h
+ *
+ * Unified sound-device I/O interface for Xen guest OSes.
+ *
+ * Copyright (C) 2013-2015 GlobalLogic Inc.
+ * Copyright (C) 2016-2017 EPAM Systems Inc.
+ *
+ * Authors: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
+ *          Oleksandr Grytsov <oleksandr_grytsov@epam.com>
+ *          Oleksandr Dmytryshyn <oleksandr.dmytryshyn@globallogic.com>
+ *          Iurii Konovalenko <iurii.konovalenko@globallogic.com>
+ */
+
+#ifndef __XEN_PUBLIC_IO_SNDIF_H__
+#define __XEN_PUBLIC_IO_SNDIF_H__
+
+#include "ring.h"
+#include "../grant_table.h"
+
+/*
+ ******************************************************************************
+ *                           Protocol version
+ ******************************************************************************
+ */
+#define XENSND_PROTOCOL_VERSION	2
+
+/*
+ ******************************************************************************
+ *                  Feature and Parameter Negotiation
+ ******************************************************************************
+ *
+ * Front->back notifications: when enqueuing a new request, sending a
+ * notification can be made conditional on xensnd_req (i.e., the generic
+ * hold-off mechanism provided by the ring macros). Backends must set
+ * xensnd_req appropriately (e.g., using RING_FINAL_CHECK_FOR_REQUESTS()).
+ *
+ * Back->front notifications: when enqueuing a new response, sending a
+ * notification can be made conditional on xensnd_resp (i.e., the generic
+ * hold-off mechanism provided by the ring macros). Frontends must set
+ * xensnd_resp appropriately (e.g., using RING_FINAL_CHECK_FOR_RESPONSES()).
+ *
+ * The two halves of a para-virtual sound card driver utilize nodes within
+ * XenStore to communicate capabilities and to negotiate operating parameters.
+ * This section enumerates these nodes which reside in the respective front and
+ * backend portions of XenStore, following the XenBus convention.
+ *
+ * All data in XenStore is stored as strings. Nodes specifying numeric
+ * values are encoded in decimal. Integer value ranges listed below are
+ * expressed as fixed sized integer types capable of storing the conversion
+ * of a properly formated node string, without loss of information.
+ *
+ ******************************************************************************
+ *                        Example configuration
+ ******************************************************************************
+ *
+ * Note: depending on the use-case backend can expose more sound cards and
+ * PCM devices/streams than the underlying HW physically has by employing
+ * SW mixers, configuring virtual sound streams, channels etc.
+ *
+ * This is an example of backend and frontend configuration:
+ *
+ *--------------------------------- Backend -----------------------------------
+ *
+ * /local/domain/0/backend/vsnd/1/0/frontend-id = "1"
+ * /local/domain/0/backend/vsnd/1/0/frontend = "/local/domain/1/device/vsnd/0"
+ * /local/domain/0/backend/vsnd/1/0/state = "4"
+ * /local/domain/0/backend/vsnd/1/0/versions = "1,2"
+ *
+ *--------------------------------- Frontend ----------------------------------
+ *
+ * /local/domain/1/device/vsnd/0/backend-id = "0"
+ * /local/domain/1/device/vsnd/0/backend = "/local/domain/0/backend/vsnd/1/0"
+ * /local/domain/1/device/vsnd/0/state = "4"
+ * /local/domain/1/device/vsnd/0/version = "1"
+ *
+ *----------------------------- Card configuration ----------------------------
+ *
+ * /local/domain/1/device/vsnd/0/short-name = "Card short name"
+ * /local/domain/1/device/vsnd/0/long-name = "Card long name"
+ * /local/domain/1/device/vsnd/0/sample-rates = "8000,32000,44100,48000,96000"
+ * /local/domain/1/device/vsnd/0/sample-formats = "s8,u8,s16_le,s16_be"
+ * /local/domain/1/device/vsnd/0/buffer-size = "262144"
+ *
+ *------------------------------- PCM device 0 --------------------------------
+ *
+ * /local/domain/1/device/vsnd/0/0/name = "General analog"
+ * /local/domain/1/device/vsnd/0/0/channels-max = "5"
+ *
+ *----------------------------- Stream 0, playback ----------------------------
+ *
+ * /local/domain/1/device/vsnd/0/0/0/type = "p"
+ * /local/domain/1/device/vsnd/0/0/0/sample-formats = "s8,u8"
+ * /local/domain/1/device/vsnd/0/0/0/unique-id = "0"
+ *
+ * /local/domain/1/device/vsnd/0/0/0/ring-ref = "386"
+ * /local/domain/1/device/vsnd/0/0/0/event-channel = "15"
+ * /local/domain/1/device/vsnd/0/0/0/evt-ring-ref = "1386"
+ * /local/domain/1/device/vsnd/0/0/0/evt-event-channel = "215"
+ *
+ *------------------------------ Stream 1, capture ----------------------------
+ *
+ * /local/domain/1/device/vsnd/0/0/1/type = "c"
+ * /local/domain/1/device/vsnd/0/0/1/channels-max = "2"
+ * /local/domain/1/device/vsnd/0/0/1/unique-id = "1"
+ *
+ * /local/domain/1/device/vsnd/0/0/1/ring-ref = "384"
+ * /local/domain/1/device/vsnd/0/0/1/event-channel = "13"
+ * /local/domain/1/device/vsnd/0/0/1/evt-ring-ref = "1384"
+ * /local/domain/1/device/vsnd/0/0/1/evt-event-channel = "213"
+ *
+ *------------------------------- PCM device 1 --------------------------------
+ *
+ * /local/domain/1/device/vsnd/0/1/name = "HDMI-0"
+ * /local/domain/1/device/vsnd/0/1/sample-rates = "8000,32000,44100"
+ *
+ *------------------------------ Stream 0, capture ----------------------------
+ *
+ * /local/domain/1/device/vsnd/0/1/0/type = "c"
+ * /local/domain/1/device/vsnd/0/1/0/unique-id = "2"
+ *
+ * /local/domain/1/device/vsnd/0/1/0/ring-ref = "387"
+ * /local/domain/1/device/vsnd/0/1/0/event-channel = "151"
+ * /local/domain/1/device/vsnd/0/1/0/evt-ring-ref = "1387"
+ * /local/domain/1/device/vsnd/0/1/0/evt-event-channel = "351"
+ *
+ *------------------------------- PCM device 2 --------------------------------
+ *
+ * /local/domain/1/device/vsnd/0/2/name = "SPDIF"
+ *
+ *----------------------------- Stream 0, playback ----------------------------
+ *
+ * /local/domain/1/device/vsnd/0/2/0/type = "p"
+ * /local/domain/1/device/vsnd/0/2/0/unique-id = "3"
+ *
+ * /local/domain/1/device/vsnd/0/2/0/ring-ref = "389"
+ * /local/domain/1/device/vsnd/0/2/0/event-channel = "152"
+ * /local/domain/1/device/vsnd/0/2/0/evt-ring-ref = "1389"
+ * /local/domain/1/device/vsnd/0/2/0/evt-event-channel = "452"
+ *
+ ******************************************************************************
+ *                            Backend XenBus Nodes
+ ******************************************************************************
+ *
+ *----------------------------- Protocol version ------------------------------
+ *
+ * versions
+ *      Values:         <string>
+ *
+ *      List of XENSND_LIST_SEPARATOR separated protocol versions supported
+ *      by the backend. For example "1,2,3".
+ *
+ ******************************************************************************
+ *                            Frontend XenBus Nodes
+ ******************************************************************************
+ *
+ *-------------------------------- Addressing ---------------------------------
+ *
+ * dom-id
+ *      Values:         <uint16_t>
+ *
+ *      Domain identifier.
+ *
+ * dev-id
+ *      Values:         <uint16_t>
+ *
+ *      Device identifier.
+ *
+ * pcm-dev-idx
+ *      Values:         <uint8_t>
+ *
+ *      Zero based contigous index of the PCM device.
+ *
+ * stream-idx
+ *      Values:         <uint8_t>
+ *
+ *      Zero based contigous index of the stream of the PCM device.
+ *
+ * The following pattern is used for addressing:
+ *   /local/domain/<dom-id>/device/vsnd/<dev-id>/<pcm-dev-idx>/<stream-idx>/...
+ *
+ *----------------------------- Protocol version ------------------------------
+ *
+ * version
+ *      Values:         <string>
+ *
+ *      Protocol version, chosen among the ones supported by the backend.
+ *
+ *------------------------------- PCM settings --------------------------------
+ *
+ * Every virtualized sound frontend has a set of PCM devices and streams, each
+ * could be individually configured. Part of the PCM configuration can be
+ * defined at higher level of the hierarchy and be fully or partially re-used
+ * by the underlying layers. These configuration values are:
+ *  o number of channels (min/max)
+ *  o supported sample rates
+ *  o supported sample formats.
+ * E.g. one can define these values for the whole card, device or stream.
+ * Every underlying layer in turn can re-define some or all of them to better
+ * fit its needs. For example, card may define number of channels to be
+ * in [1; 8] range, and some particular stream may be limited to [1; 2] only.
+ * The rule is that the underlying layer must be a subset of the upper layer
+ * range.
+ *
+ * channels-min
+ *      Values:         <uint8_t>
+ *
+ *      The minimum amount of channels that is supported, [1; channels-max].
+ *      Optional, if not set or omitted a value of 1 is used.
+ *
+ * channels-max
+ *      Values:         <uint8_t>
+ *
+ *      The maximum amount of channels that is supported.
+ *      Must be at least <channels-min>.
+ *
+ * sample-rates
+ *      Values:         <list of uint32_t>
+ *
+ *      List of supported sample rates separated by XENSND_LIST_SEPARATOR.
+ *      Sample rates are expressed as a list of decimal values w/o any
+ *      ordering requirement.
+ *
+ * sample-formats
+ *      Values:         <list of XENSND_PCM_FORMAT_XXX_STR>
+ *
+ *      List of supported sample formats separated by XENSND_LIST_SEPARATOR.
+ *      Items must not exceed XENSND_SAMPLE_FORMAT_MAX_LEN length.
+ *
+ * buffer-size
+ *      Values:         <uint32_t>
+ *
+ *      The maximum size in octets of the buffer to allocate per stream.
+ *
+ *----------------------- Virtual sound card settings -------------------------
+ * short-name
+ *      Values:         <char[32]>
+ *
+ *      Short name of the virtual sound card. Optional.
+ *
+ * long-name
+ *      Values:         <char[80]>
+ *
+ *      Long name of the virtual sound card. Optional.
+ *
+ *----------------------------- Device settings -------------------------------
+ * name
+ *      Values:         <char[80]>
+ *
+ *      Name of the sound device within the virtual sound card. Optional.
+ *
+ *----------------------------- Stream settings -------------------------------
+ *
+ * type
+ *      Values:         "p", "c"
+ *
+ *      Stream type: "p" - playback stream, "c" - capture stream
+ *
+ *      If both capture and playback are needed then two streams need to be
+ *      defined under the same device.
+ *
+ * unique-id
+ *      Values:         <string>
+ *
+ *      After stream initialization it is assigned a unique ID, so every
+ *      stream of the frontend can be identified by the backend by this ID.
+ *      This can be UUID or such.
+ *
+ *-------------------- Stream Request Transport Parameters --------------------
+ *
+ * event-channel
+ *      Values:         <uint32_t>
+ *
+ *      The identifier of the Xen event channel used to signal activity
+ *      in the ring buffer.
+ *
+ * ring-ref
+ *      Values:         <uint32_t>
+ *
+ *      The Xen grant reference granting permission for the backend to map
+ *      a sole page in a single page sized ring buffer.
+ *
+ *--------------------- Stream Event Transport Parameters ---------------------
+ *
+ * This communication path is used to deliver asynchronous events from backend
+ * to frontend, set up per stream.
+ *
+ * evt-event-channel
+ *      Values:         <uint32_t>
+ *
+ *      The identifier of the Xen event channel used to signal activity
+ *      in the ring buffer.
+ *
+ * evt-ring-ref
+ *      Values:         <uint32_t>
+ *
+ *      The Xen grant reference granting permission for the backend to map
+ *      a sole page in a single page sized ring buffer.
+ *
+ ******************************************************************************
+ *                               STATE DIAGRAMS
+ ******************************************************************************
+ *
+ * Tool stack creates front and back state nodes with initial state
+ * XenbusStateInitialising.
+ * Tool stack creates and sets up frontend sound configuration nodes per domain.
+ *
+ * Front                                Back
+ * =================================    =====================================
+ * XenbusStateInitialising              XenbusStateInitialising
+ *                                       o Query backend device identification
+ *                                         data.
+ *                                       o Open and validate backend device.
+ *                                                      |
+ *                                                      |
+ *                                                      V
+ *                                      XenbusStateInitWait
+ *
+ * o Query frontend configuration
+ * o Allocate and initialize
+ *   event channels per configured
+ *   playback/capture stream.
+ * o Publish transport parameters
+ *   that will be in effect during
+ *   this connection.
+ *              |
+ *              |
+ *              V
+ * XenbusStateInitialised
+ *
+ *                                       o Query frontend transport parameters.
+ *                                       o Connect to the event channels.
+ *                                                      |
+ *                                                      |
+ *                                                      V
+ *                                      XenbusStateConnected
+ *
+ *  o Create and initialize OS
+ *    virtual sound device instances
+ *    as per configuration.
+ *              |
+ *              |
+ *              V
+ * XenbusStateConnected
+ *
+ *                                      XenbusStateUnknown
+ *                                      XenbusStateClosed
+ *                                      XenbusStateClosing
+ * o Remove virtual sound device
+ * o Remove event channels
+ *              |
+ *              |
+ *              V
+ * XenbusStateClosed
+ *
+ *------------------------------- Recovery flow -------------------------------
+ *
+ * In case of frontend unrecoverable errors backend handles that as
+ * if frontend goes into the XenbusStateClosed state.
+ *
+ * In case of backend unrecoverable errors frontend tries removing
+ * the virtualized device. If this is possible at the moment of error,
+ * then frontend goes into the XenbusStateInitialising state and is ready for
+ * new connection with backend. If the virtualized device is still in use and
+ * cannot be removed, then frontend goes into the XenbusStateReconfiguring state
+ * until either the virtualized device removed or backend initiates a new
+ * connection. On the virtualized device removal frontend goes into the
+ * XenbusStateInitialising state.
+ *
+ * Note on XenbusStateReconfiguring state of the frontend: if backend has
+ * unrecoverable errors then frontend cannot send requests to the backend
+ * and thus cannot provide functionality of the virtualized device anymore.
+ * After backend is back to normal the virtualized device may still hold some
+ * state: configuration in use, allocated buffers, client application state etc.
+ * So, in most cases, this will require frontend to implement complex recovery
+ * reconnect logic. Instead, by going into XenbusStateReconfiguring state,
+ * frontend will make sure no new clients of the virtualized device are
+ * accepted, allow existing client(s) to exit gracefully by signaling error
+ * state etc.
+ * Once all the clients are gone frontend can reinitialize the virtualized
+ * device and get into XenbusStateInitialising state again signaling the
+ * backend that a new connection can be made.
+ *
+ * There are multiple conditions possible under which frontend will go from
+ * XenbusStateReconfiguring into XenbusStateInitialising, some of them are OS
+ * specific. For example:
+ * 1. The underlying OS framework may provide callbacks to signal that the last
+ *    client of the virtualized device has gone and the device can be removed
+ * 2. Frontend can schedule a deferred work (timer/tasklet/workqueue)
+ *    to periodically check if this is the right time to re-try removal of
+ *    the virtualized device.
+ * 3. By any other means.
+ *
+ ******************************************************************************
+ *                             PCM FORMATS
+ ******************************************************************************
+ *
+ * XENSND_PCM_FORMAT_<format>[_<endian>]
+ *
+ * format: <S/U/F><bits> or <name>
+ *     S - signed, U - unsigned, F - float
+ *     bits - 8, 16, 24, 32
+ *     name - MU_LAW, GSM, etc.
+ *
+ * endian: <LE/BE>, may be absent
+ *     LE - Little endian, BE - Big endian
+ */
+#define XENSND_PCM_FORMAT_S8		0
+#define XENSND_PCM_FORMAT_U8		1
+#define XENSND_PCM_FORMAT_S16_LE	2
+#define XENSND_PCM_FORMAT_S16_BE	3
+#define XENSND_PCM_FORMAT_U16_LE	4
+#define XENSND_PCM_FORMAT_U16_BE	5
+#define XENSND_PCM_FORMAT_S24_LE	6
+#define XENSND_PCM_FORMAT_S24_BE	7
+#define XENSND_PCM_FORMAT_U24_LE	8
+#define XENSND_PCM_FORMAT_U24_BE	9
+#define XENSND_PCM_FORMAT_S32_LE	10
+#define XENSND_PCM_FORMAT_S32_BE	11
+#define XENSND_PCM_FORMAT_U32_LE	12
+#define XENSND_PCM_FORMAT_U32_BE	13
+#define XENSND_PCM_FORMAT_F32_LE	14 /* 4-byte float, IEEE-754 32-bit, */
+#define XENSND_PCM_FORMAT_F32_BE	15 /* range -1.0 to 1.0              */
+#define XENSND_PCM_FORMAT_F64_LE	16 /* 8-byte float, IEEE-754 64-bit, */
+#define XENSND_PCM_FORMAT_F64_BE	17 /* range -1.0 to 1.0              */
+#define XENSND_PCM_FORMAT_IEC958_SUBFRAME_LE 18
+#define XENSND_PCM_FORMAT_IEC958_SUBFRAME_BE 19
+#define XENSND_PCM_FORMAT_MU_LAW	20
+#define XENSND_PCM_FORMAT_A_LAW		21
+#define XENSND_PCM_FORMAT_IMA_ADPCM	22
+#define XENSND_PCM_FORMAT_MPEG		23
+#define XENSND_PCM_FORMAT_GSM		24
+
+/*
+ ******************************************************************************
+ *                             REQUEST CODES
+ ******************************************************************************
+ */
+#define XENSND_OP_OPEN			0
+#define XENSND_OP_CLOSE			1
+#define XENSND_OP_READ			2
+#define XENSND_OP_WRITE			3
+#define XENSND_OP_SET_VOLUME		4
+#define XENSND_OP_GET_VOLUME		5
+#define XENSND_OP_MUTE			6
+#define XENSND_OP_UNMUTE		7
+#define XENSND_OP_TRIGGER		8
+#define XENSND_OP_HW_PARAM_QUERY	9
+
+#define XENSND_OP_TRIGGER_START		0
+#define XENSND_OP_TRIGGER_PAUSE		1
+#define XENSND_OP_TRIGGER_STOP		2
+#define XENSND_OP_TRIGGER_RESUME	3
+
+/*
+ ******************************************************************************
+ *                                 EVENT CODES
+ ******************************************************************************
+ */
+#define XENSND_EVT_CUR_POS		0
+
+/*
+ ******************************************************************************
+ *               XENSTORE FIELD AND PATH NAME STRINGS, HELPERS
+ ******************************************************************************
+ */
+#define XENSND_DRIVER_NAME		"vsnd"
+
+#define XENSND_LIST_SEPARATOR		","
+/* Field names */
+#define XENSND_FIELD_BE_VERSIONS	"versions"
+#define XENSND_FIELD_FE_VERSION		"version"
+#define XENSND_FIELD_VCARD_SHORT_NAME	"short-name"
+#define XENSND_FIELD_VCARD_LONG_NAME	"long-name"
+#define XENSND_FIELD_RING_REF		"ring-ref"
+#define XENSND_FIELD_EVT_CHNL		"event-channel"
+#define XENSND_FIELD_EVT_RING_REF	"evt-ring-ref"
+#define XENSND_FIELD_EVT_EVT_CHNL	"evt-event-channel"
+#define XENSND_FIELD_DEVICE_NAME	"name"
+#define XENSND_FIELD_TYPE		"type"
+#define XENSND_FIELD_STREAM_UNIQUE_ID	"unique-id"
+#define XENSND_FIELD_CHANNELS_MIN	"channels-min"
+#define XENSND_FIELD_CHANNELS_MAX	"channels-max"
+#define XENSND_FIELD_SAMPLE_RATES	"sample-rates"
+#define XENSND_FIELD_SAMPLE_FORMATS	"sample-formats"
+#define XENSND_FIELD_BUFFER_SIZE	"buffer-size"
+
+/* Stream type field values. */
+#define XENSND_STREAM_TYPE_PLAYBACK	"p"
+#define XENSND_STREAM_TYPE_CAPTURE	"c"
+/* Sample rate max string length */
+#define XENSND_SAMPLE_RATE_MAX_LEN	11
+/* Sample format field values */
+#define XENSND_SAMPLE_FORMAT_MAX_LEN	24
+
+#define XENSND_PCM_FORMAT_S8_STR	"s8"
+#define XENSND_PCM_FORMAT_U8_STR	"u8"
+#define XENSND_PCM_FORMAT_S16_LE_STR	"s16_le"
+#define XENSND_PCM_FORMAT_S16_BE_STR	"s16_be"
+#define XENSND_PCM_FORMAT_U16_LE_STR	"u16_le"
+#define XENSND_PCM_FORMAT_U16_BE_STR	"u16_be"
+#define XENSND_PCM_FORMAT_S24_LE_STR	"s24_le"
+#define XENSND_PCM_FORMAT_S24_BE_STR	"s24_be"
+#define XENSND_PCM_FORMAT_U24_LE_STR	"u24_le"
+#define XENSND_PCM_FORMAT_U24_BE_STR	"u24_be"
+#define XENSND_PCM_FORMAT_S32_LE_STR	"s32_le"
+#define XENSND_PCM_FORMAT_S32_BE_STR	"s32_be"
+#define XENSND_PCM_FORMAT_U32_LE_STR	"u32_le"
+#define XENSND_PCM_FORMAT_U32_BE_STR	"u32_be"
+#define XENSND_PCM_FORMAT_F32_LE_STR	"float_le"
+#define XENSND_PCM_FORMAT_F32_BE_STR	"float_be"
+#define XENSND_PCM_FORMAT_F64_LE_STR	"float64_le"
+#define XENSND_PCM_FORMAT_F64_BE_STR	"float64_be"
+#define XENSND_PCM_FORMAT_IEC958_SUBFRAME_LE_STR "iec958_subframe_le"
+#define XENSND_PCM_FORMAT_IEC958_SUBFRAME_BE_STR "iec958_subframe_be"
+#define XENSND_PCM_FORMAT_MU_LAW_STR	"mu_law"
+#define XENSND_PCM_FORMAT_A_LAW_STR	"a_law"
+#define XENSND_PCM_FORMAT_IMA_ADPCM_STR	"ima_adpcm"
+#define XENSND_PCM_FORMAT_MPEG_STR	"mpeg"
+#define XENSND_PCM_FORMAT_GSM_STR	"gsm"
+
+
+/*
+ ******************************************************************************
+ *                          STATUS RETURN CODES
+ ******************************************************************************
+ *
+ * Status return code is zero on success and -XEN_EXX on failure.
+ *
+ ******************************************************************************
+ *                              Assumptions
+ ******************************************************************************
+ * o usage of grant reference 0 as invalid grant reference:
+ *   grant reference 0 is valid, but never exposed to a PV driver,
+ *   because of the fact it is already in use/reserved by the PV console.
+ * o all references in this document to page sizes must be treated
+ *   as pages of size XEN_PAGE_SIZE unless otherwise noted.
+ *
+ ******************************************************************************
+ *       Description of the protocol between frontend and backend driver
+ ******************************************************************************
+ *
+ * The two halves of a Para-virtual sound driver communicate with
+ * each other using shared pages and event channels.
+ * Shared page contains a ring with request/response packets.
+ *
+ * Packets, used for input/output operations, e.g. read/write, set/get volume,
+ * etc., provide offset/length fields in order to allow asynchronous protocol
+ * operation with buffer space sharing: part of the buffer allocated at
+ * XENSND_OP_OPEN can be used for audio samples and part, for example,
+ * for volume control.
+ *
+ * All reserved fields in the structures below must be 0.
+ *
+ *---------------------------------- Requests ---------------------------------
+ *
+ * All request packets have the same length (64 octets)
+ * All request packets have common header:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |    operation   |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ *   id - uint16_t, private guest value, echoed in response
+ *   operation - uint8_t, operation code, XENSND_OP_???
+ *
+ * For all packets which use offset and length:
+ *   offset - uint32_t, read or write data offset within the shared buffer,
+ *     passed with XENSND_OP_OPEN request, octets,
+ *     [0; XENSND_OP_OPEN.buffer_sz - 1].
+ *   length - uint32_t, read or write data length, octets
+ *
+ * Request open - open a PCM stream for playback or capture:
+ *
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                | XENSND_OP_OPEN |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                             pcm_rate                              | 12
+ * +----------------+----------------+----------------+----------------+
+ * |  pcm_format    |  pcm_channels  |             reserved            | 16
+ * +----------------+----------------+----------------+----------------+
+ * |                             buffer_sz                             | 20
+ * +----------------+----------------+----------------+----------------+
+ * |                           gref_directory                          | 24
+ * +----------------+----------------+----------------+----------------+
+ * |                             period_sz                             | 28
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 32
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ *
+ * pcm_rate - uint32_t, stream data rate, Hz
+ * pcm_format - uint8_t, XENSND_PCM_FORMAT_XXX value
+ * pcm_channels - uint8_t, number of channels of this stream,
+ *   [channels-min; channels-max]
+ * buffer_sz - uint32_t, buffer size to be allocated, octets
+ * period_sz - uint32_t, event period size, octets
+ *   This is the requested value of the period at which frontend would
+ *   like to receive XENSND_EVT_CUR_POS notifications from the backend when
+ *   stream position advances during playback/capture.
+ *   It shows how many octets are expected to be played/captured before
+ *   sending such an event.
+ *   If set to 0 no XENSND_EVT_CUR_POS events are sent by the backend.
+ *
+ * gref_directory - grant_ref_t, a reference to the first shared page
+ *   describing shared buffer references. At least one page exists. If shared
+ *   buffer size  (buffer_sz) exceeds what can be addressed by this single page,
+ *   then reference to the next page must be supplied (see gref_dir_next_page
+ *   below)
+ */
+
+struct xensnd_open_req {
+	uint32_t pcm_rate;
+	uint8_t pcm_format;
+	uint8_t pcm_channels;
+	uint16_t reserved;
+	uint32_t buffer_sz;
+	grant_ref_t gref_directory;
+	uint32_t period_sz;
+};
+
+/*
+ * Shared page for XENSND_OP_OPEN buffer descriptor (gref_directory in the
+ *   request) employs a list of pages, describing all pages of the shared data
+ *   buffer:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |                        gref_dir_next_page                         | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                              gref[0]                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                              gref[i]                              | i*4+8
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             gref[N - 1]                           | N*4+8
+ * +----------------+----------------+----------------+----------------+
+ *
+ * gref_dir_next_page - grant_ref_t, reference to the next page describing
+ *   page directory. Must be 0 if there are no more pages in the list.
+ * gref[i] - grant_ref_t, reference to a shared page of the buffer
+ *   allocated at XENSND_OP_OPEN
+ *
+ * Number of grant_ref_t entries in the whole page directory is not
+ * passed, but instead can be calculated as:
+ *   num_grefs_total = (XENSND_OP_OPEN.buffer_sz + XEN_PAGE_SIZE - 1) /
+ *       XEN_PAGE_SIZE
+ */
+
+struct xensnd_page_directory {
+	grant_ref_t gref_dir_next_page;
+	grant_ref_t gref[1]; /* Variable length */
+};
+
+/*
+ *  Request close - close an opened pcm stream:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                | XENSND_OP_CLOSE|    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ *
+ * Request read/write - used for read (for capture) or write (for playback):
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |   operation    |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                              offset                               | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                              length                               | 16
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 20
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ *
+ * operation - XENSND_OP_READ for read or XENSND_OP_WRITE for write
+ */
+
+struct xensnd_rw_req {
+	uint32_t offset;
+	uint32_t length;
+};
+
+/*
+ * Request set/get volume - set/get channels' volume of the stream given:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |   operation    |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                              offset                               | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                              length                               | 16
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 20
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ *
+ * operation - XENSND_OP_SET_VOLUME for volume set
+ *   or XENSND_OP_GET_VOLUME for volume get
+ * Buffer passed with XENSND_OP_OPEN is used to exchange volume
+ * values:
+ *
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |                             channel[0]                            | 4
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             channel[i]                            | i*4
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                           channel[N - 1]                          | (N-1)*4
+ * +----------------+----------------+----------------+----------------+
+ *
+ * N = XENSND_OP_OPEN.pcm_channels
+ * i - uint8_t, index of a channel
+ * channel[i] - sint32_t, volume of i-th channel
+ * Volume is expressed as a signed value in steps of 0.001 dB,
+ * while 0 being 0 dB.
+ *
+ * Request mute/unmute - mute/unmute stream:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |   operation    |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                              offset                               | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                              length                               | 16
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 20
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ *
+ * operation - XENSND_OP_MUTE for mute or XENSND_OP_UNMUTE for unmute
+ * Buffer passed with XENSND_OP_OPEN is used to exchange mute/unmute
+ * values:
+ *
+ *                                   0                                 octet
+ * +----------------+----------------+----------------+----------------+
+ * |                             channel[0]                            | 4
+ * +----------------+----------------+----------------+----------------+
+ * +/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             channel[i]                            | i*4
+ * +----------------+----------------+----------------+----------------+
+ * +/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                           channel[N - 1]                          | (N-1)*4
+ * +----------------+----------------+----------------+----------------+
+ *
+ * N = XENSND_OP_OPEN.pcm_channels
+ * i - uint8_t, index of a channel
+ * channel[i] - uint8_t, non-zero if i-th channel needs to be muted/unmuted
+ *
+ *------------------------------------ N.B. -----------------------------------
+ *
+ * The 'struct xensnd_rw_req' is also used for XENSND_OP_SET_VOLUME,
+ * XENSND_OP_GET_VOLUME, XENSND_OP_MUTE, XENSND_OP_UNMUTE.
+ *
+ * Request stream running state change - trigger PCM stream running state
+ * to start, stop, pause or resume:
+ *
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |   _OP_TRIGGER  |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |      type      |                     reserved                     | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 16
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ *
+ * type - uint8_t, XENSND_OP_TRIGGER_XXX value
+ */
+
+struct xensnd_trigger_req {
+	uint8_t type;
+};
+
+/*
+ * Request stream parameter ranges: request intervals and
+ *   masks of supported ranges for stream configuration values.
+ *
+ *   Sound device configuration for a particular stream is a limited subset
+ *   of the multidimensional configuration available on XenStore, e.g.
+ *   once the frame rate has been selected there is a limited supported range
+ *   for sample rates becomes available (which might be the same set configured
+ *   on XenStore or less). For example, selecting 96kHz sample rate may limit
+ *   number of channels available for such configuration from 4 to 2, etc.
+ *   Thus, each call to XENSND_OP_HW_PARAM_QUERY may reduce configuration
+ *   space making it possible to iteratively get the final stream configuration,
+ *   used in XENSND_OP_OPEN request.
+ *
+ *   See response format for this request.
+ *
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                | _HW_PARAM_QUERY|    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                     formats mask low 32-bit                       | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                     formats mask high 32-bit                      | 16
+ * +----------------+----------------+----------------+----------------+
+ * |                              min rate                             | 20
+ * +----------------+----------------+----------------+----------------+
+ * |                              max rate                             | 24
+ * +----------------+----------------+----------------+----------------+
+ * |                            min channels                           | 28
+ * +----------------+----------------+----------------+----------------+
+ * |                            max channels                           | 32
+ * +----------------+----------------+----------------+----------------+
+ * |                         min buffer frames                         | 36
+ * +----------------+----------------+----------------+----------------+
+ * |                         max buffer frames                         | 40
+ * +----------------+----------------+----------------+----------------+
+ * |                         min period frames                         | 44
+ * +----------------+----------------+----------------+----------------+
+ * |                         max period frames                         | 48
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 52
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ *
+ * formats - uint64_t, bit mask representing values of the parameter
+ *     made as bitwise OR of (1 << XENSND_PCM_FORMAT_XXX) values
+ *
+ * For interval parameters:
+ *   min - uint32_t, minimum value of the parameter
+ *   max - uint32_t, maximum value of the parameter
+ *
+ * Frame is defined as a product of the number of channels by the
+ * number of octets per one sample.
+ */
+
+struct xensnd_query_hw_param {
+	uint64_t formats;
+	struct {
+		uint32_t min;
+		uint32_t max;
+	} rates;
+	struct {
+		uint32_t min;
+		uint32_t max;
+	} channels;
+	struct {
+		uint32_t min;
+		uint32_t max;
+	} buffer;
+	struct {
+		uint32_t min;
+		uint32_t max;
+	} period;
+};
+
+/*
+ *---------------------------------- Responses --------------------------------
+ *
+ * All response packets have the same length (64 octets)
+ *
+ * All response packets have common header:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |    operation   |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                              status                               | 8
+ * +----------------+----------------+----------------+----------------+
+ *
+ * id - uint16_t, copied from the request
+ * operation - uint8_t, XENSND_OP_* - copied from request
+ * status - int32_t, response status, zero on success and -XEN_EXX on failure
+ *
+ *
+ * HW parameter query response - response for XENSND_OP_HW_PARAM_QUERY:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |    operation   |    reserved    | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                              status                               | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                     formats mask low 32-bit                       | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                     formats mask high 32-bit                      | 16
+ * +----------------+----------------+----------------+----------------+
+ * |                              min rate                             | 20
+ * +----------------+----------------+----------------+----------------+
+ * |                              max rate                             | 24
+ * +----------------+----------------+----------------+----------------+
+ * |                            min channels                           | 28
+ * +----------------+----------------+----------------+----------------+
+ * |                            max channels                           | 32
+ * +----------------+----------------+----------------+----------------+
+ * |                         min buffer frames                         | 36
+ * +----------------+----------------+----------------+----------------+
+ * |                         max buffer frames                         | 40
+ * +----------------+----------------+----------------+----------------+
+ * |                         min period frames                         | 44
+ * +----------------+----------------+----------------+----------------+
+ * |                         max period frames                         | 48
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 52
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ *
+ * Meaning of the values in this response is the same as for
+ * XENSND_OP_HW_PARAM_QUERY request.
+ */
+
+/*
+ *----------------------------------- Events ----------------------------------
+ *
+ * Events are sent via shared page allocated by the front and propagated by
+ *   evt-event-channel/evt-ring-ref XenStore entries
+ * All event packets have the same length (64 octets)
+ * All event packets have common header:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |      type      |   reserved     | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ *
+ * id - uint16_t, event id, may be used by front
+ * type - uint8_t, type of the event
+ *
+ *
+ * Current stream position - event from back to front when stream's
+ *   playback/capture position has advanced:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |   _EVT_CUR_POS |   reserved     | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                         position low 32-bit                       | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                         position high 32-bit                      | 16
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 20
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |                             reserved                              | 64
+ * +----------------+----------------+----------------+----------------+
+ *
+ * position - current value of stream's playback/capture position, octets
+ *
+ */
+
+struct xensnd_cur_pos_evt {
+	uint64_t position;
+};
+
+struct xensnd_req {
+	uint16_t id;
+	uint8_t operation;
+	uint8_t reserved[5];
+	union {
+		struct xensnd_open_req open;
+		struct xensnd_rw_req rw;
+		struct xensnd_trigger_req trigger;
+		struct xensnd_query_hw_param hw_param;
+		uint8_t reserved[56];
+	} op;
+};
+
+struct xensnd_resp {
+	uint16_t id;
+	uint8_t operation;
+	uint8_t reserved;
+	int32_t status;
+	union {
+		struct xensnd_query_hw_param hw_param;
+		uint8_t reserved1[56];
+	} resp;
+};
+
+struct xensnd_evt {
+	uint16_t id;
+	uint8_t type;
+	uint8_t reserved[5];
+	union {
+		struct xensnd_cur_pos_evt cur_pos;
+		uint8_t reserved[56];
+	} op;
+};
+
+DEFINE_RING_TYPES(xen_sndif, struct xensnd_req, struct xensnd_resp);
+
+/*
+ ******************************************************************************
+ *                        Back to front events delivery
+ ******************************************************************************
+ * In order to deliver asynchronous events from back to front a shared page is
+ * allocated by front and its granted reference propagated to back via
+ * XenStore entries (evt-ring-ref/evt-event-channel).
+ * This page has a common header used by both front and back to synchronize
+ * access and control event's ring buffer, while back being a producer of the
+ * events and front being a consumer. The rest of the page after the header
+ * is used for event packets.
+ *
+ * Upon reception of an event(s) front may confirm its reception
+ * for either each event, group of events or none.
+ */
+
+struct xensnd_event_page {
+	uint32_t in_cons;
+	uint32_t in_prod;
+	uint8_t reserved[56];
+};
+
+#define XENSND_EVENT_PAGE_SIZE XEN_PAGE_SIZE
+#define XENSND_IN_RING_OFFS (sizeof(struct xensnd_event_page))
+#define XENSND_IN_RING_SIZE (XENSND_EVENT_PAGE_SIZE - XENSND_IN_RING_OFFS)
+#define XENSND_IN_RING_LEN (XENSND_IN_RING_SIZE / sizeof(struct xensnd_evt))
+#define XENSND_IN_RING(page) \
+	((struct xensnd_evt *)((char *)(page) + XENSND_IN_RING_OFFS))
+#define XENSND_IN_RING_REF(page, idx) \
+	(XENSND_IN_RING((page))[(idx) % XENSND_IN_RING_LEN])
+
+#endif /* __XEN_PUBLIC_IO_SNDIF_H__ */
diff --git a/include/xen/interface/io/tpmif.h b/include/xen/interface/io/tpmif.h
new file mode 100644
index 000000000..f8aa8bac5
--- /dev/null
+++ b/include/xen/interface/io/tpmif.h
@@ -0,0 +1,52 @@
+/******************************************************************************
+ * tpmif.h
+ *
+ * TPM I/O interface for Xen guest OSes, v2
+ *
+ * This file is in the public domain.
+ *
+ */
+
+#ifndef __XEN_PUBLIC_IO_TPMIF_H__
+#define __XEN_PUBLIC_IO_TPMIF_H__
+
+/*
+ * Xenbus state machine
+ *
+ * Device open:
+ *   1. Both ends start in XenbusStateInitialising
+ *   2. Backend transitions to InitWait (frontend does not wait on this step)
+ *   3. Frontend populates ring-ref, event-channel, feature-protocol-v2
+ *   4. Frontend transitions to Initialised
+ *   5. Backend maps grant and event channel, verifies feature-protocol-v2
+ *   6. Backend transitions to Connected
+ *   7. Frontend verifies feature-protocol-v2, transitions to Connected
+ *
+ * Device close:
+ *   1. State is changed to XenbusStateClosing
+ *   2. Frontend transitions to Closed
+ *   3. Backend unmaps grant and event, changes state to InitWait
+ */
+
+enum vtpm_shared_page_state {
+	VTPM_STATE_IDLE,         /* no contents / vTPM idle / cancel complete */
+	VTPM_STATE_SUBMIT,       /* request ready / vTPM working */
+	VTPM_STATE_FINISH,       /* response ready / vTPM idle */
+	VTPM_STATE_CANCEL,       /* cancel requested / vTPM working */
+};
+/* The backend should only change state to IDLE or FINISH, while the
+ * frontend should only change to SUBMIT or CANCEL. */
+
+
+struct vtpm_shared_page {
+	uint32_t length;         /* request/response length in bytes */
+
+	uint8_t state;           /* enum vtpm_shared_page_state */
+	uint8_t locality;        /* for the current request */
+	uint8_t pad;
+
+	uint8_t nr_extra_pages;  /* extra pages for long packets; may be zero */
+	uint32_t extra_pages[]; /* grant IDs; length in nr_extra_pages */
+};
+
+#endif
diff --git a/include/xen/interface/io/usbif.h b/include/xen/interface/io/usbif.h
new file mode 100644
index 000000000..a70e0b931
--- /dev/null
+++ b/include/xen/interface/io/usbif.h
@@ -0,0 +1,405 @@
+/* SPDX-License-Identifier: MIT */
+
+/*
+ * usbif.h
+ *
+ * USB I/O interface for Xen guest OSes.
+ *
+ * Copyright (C) 2009, FUJITSU LABORATORIES LTD.
+ * Author: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com>
+ */
+
+#ifndef __XEN_PUBLIC_IO_USBIF_H__
+#define __XEN_PUBLIC_IO_USBIF_H__
+
+#include "ring.h"
+#include "../grant_table.h"
+
+/*
+ * Detailed Interface Description
+ * ==============================
+ * The pvUSB interface is using a split driver design: a frontend driver in
+ * the guest and a backend driver in a driver domain (normally dom0) having
+ * access to the physical USB device(s) being passed to the guest.
+ *
+ * The frontend and backend drivers use XenStore to initiate the connection
+ * between them, the I/O activity is handled via two shared ring pages and an
+ * event channel. As the interface between frontend and backend is at the USB
+ * host connector level, multiple (up to 31) physical USB devices can be
+ * handled by a single connection.
+ *
+ * The Xen pvUSB device name is "qusb", so the frontend's XenStore entries are
+ * to be found under "device/qusb", while the backend's XenStore entries are
+ * under "backend/<guest-dom-id>/qusb".
+ *
+ * When a new pvUSB connection is established, the frontend needs to setup the
+ * two shared ring pages for communication and the event channel. The ring
+ * pages need to be made available to the backend via the grant table
+ * interface.
+ *
+ * One of the shared ring pages is used by the backend to inform the frontend
+ * about USB device plug events (device to be added or removed). This is the
+ * "conn-ring".
+ *
+ * The other ring page is used for USB I/O communication (requests and
+ * responses). This is the "urb-ring".
+ *
+ * Feature and Parameter Negotiation
+ * =================================
+ * The two halves of a Xen pvUSB driver utilize nodes within the XenStore to
+ * communicate capabilities and to negotiate operating parameters. This
+ * section enumerates these nodes which reside in the respective front and
+ * backend portions of the XenStore, following the XenBus convention.
+ *
+ * Any specified default value is in effect if the corresponding XenBus node
+ * is not present in the XenStore.
+ *
+ * XenStore nodes in sections marked "PRIVATE" are solely for use by the
+ * driver side whose XenBus tree contains them.
+ *
+ *****************************************************************************
+ *                            Backend XenBus Nodes
+ *****************************************************************************
+ *
+ *------------------ Backend Device Identification (PRIVATE) ------------------
+ *
+ * num-ports
+ *      Values:         unsigned [1...31]
+ *
+ *      Number of ports for this (virtual) USB host connector.
+ *
+ * usb-ver
+ *      Values:         unsigned [1...2]
+ *
+ *      USB version of this host connector: 1 = USB 1.1, 2 = USB 2.0.
+ *
+ * port/[1...31]
+ *      Values:         string
+ *
+ *      Physical USB device connected to the given port, e.g. "3-1.5".
+ *
+ *****************************************************************************
+ *                            Frontend XenBus Nodes
+ *****************************************************************************
+ *
+ *----------------------- Request Transport Parameters -----------------------
+ *
+ * event-channel
+ *      Values:         unsigned
+ *
+ *      The identifier of the Xen event channel used to signal activity
+ *      in the ring buffer.
+ *
+ * urb-ring-ref
+ *      Values:         unsigned
+ *
+ *      The Xen grant reference granting permission for the backend to map
+ *      the sole page in a single page sized ring buffer. This is the ring
+ *      buffer for urb requests.
+ *
+ * conn-ring-ref
+ *      Values:         unsigned
+ *
+ *      The Xen grant reference granting permission for the backend to map
+ *      the sole page in a single page sized ring buffer. This is the ring
+ *      buffer for connection/disconnection requests.
+ *
+ * protocol
+ *      Values:         string (XEN_IO_PROTO_ABI_*)
+ *      Default Value:  XEN_IO_PROTO_ABI_NATIVE
+ *
+ *      The machine ABI rules governing the format of all ring request and
+ *      response structures.
+ *
+ * Protocol Description
+ * ====================
+ *
+ *-------------------------- USB device plug events --------------------------
+ *
+ * USB device plug events are send via the "conn-ring" shared page. As only
+ * events are being sent, the respective requests from the frontend to the
+ * backend are just dummy ones.
+ * The events sent to the frontend have the following layout:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |    portnum     |     speed      | 4
+ * +----------------+----------------+----------------+----------------+
+ *   id - uint16_t, event id (taken from the actual frontend dummy request)
+ *   portnum - uint8_t, port number (1 ... 31)
+ *   speed - uint8_t, device XENUSB_SPEED_*, XENUSB_SPEED_NONE == unplug
+ *
+ * The dummy request:
+ *         0                1        octet
+ * +----------------+----------------+
+ * |               id                | 2
+ * +----------------+----------------+
+ *   id - uint16_t, guest supplied value (no need for being unique)
+ *
+ *-------------------------- USB I/O request ---------------------------------
+ *
+ * A single USB I/O request on the "urb-ring" has the following layout:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |         nr_buffer_segs          | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                               pipe                                | 8
+ * +----------------+----------------+----------------+----------------+
+ * |         transfer_flags          |          buffer_length          | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                       request type specific                       | 16
+ * |                               data                                | 20
+ * +----------------+----------------+----------------+----------------+
+ * |                              seg[0]                               | 24
+ * |                               data                                | 28
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * |             seg[XENUSB_MAX_SEGMENTS_PER_REQUEST - 1]              | 144
+ * |                               data                                | 148
+ * +----------------+----------------+----------------+----------------+
+ * Bit field bit number 0 is always least significant bit, undefined bits must
+ * be zero.
+ *   id - uint16_t, guest supplied value
+ *   nr_buffer_segs - uint16_t, number of segment entries in seg[] array
+ *   pipe - uint32_t, bit field with multiple information:
+ *     bits 0-4: port request to send to
+ *     bit 5: unlink request with specified id (cancel I/O) if set (see below)
+ *     bit 7: direction (1 = read from device)
+ *     bits 8-14: device number on port
+ *     bits 15-18: endpoint of device
+ *     bits 30-31: request type: 00 = isochronous, 01 = interrupt,
+ *                               10 = control, 11 = bulk
+ *   transfer_flags - uint16_t, bit field with processing flags:
+ *     bit 0: less data than specified allowed
+ *   buffer_length - uint16_t, total length of data
+ *   request type specific data - 8 bytes, see below
+ *   seg[] - array with 8 byte elements, see below
+ *
+ * Request type specific data for isochronous request:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |            interval             |           start_frame           | 4
+ * +----------------+----------------+----------------+----------------+
+ * |       number_of_packets         |       nr_frame_desc_segs        | 8
+ * +----------------+----------------+----------------+----------------+
+ *   interval - uint16_t, time interval in msecs between frames
+ *   start_frame - uint16_t, start frame number
+ *   number_of_packets - uint16_t, number of packets to transfer
+ *   nr_frame_desc_segs - uint16_t number of seg[] frame descriptors elements
+ *
+ * Request type specific data for interrupt request:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |            interval             |                0                | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                                 0                                 | 8
+ * +----------------+----------------+----------------+----------------+
+ *   interval - uint16_t, time in msecs until interruption
+ *
+ * Request type specific data for control request:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |                      data of setup packet                         | 4
+ * |                                                                   | 8
+ * +----------------+----------------+----------------+----------------+
+ *
+ * Request type specific data for bulk request:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |                                 0                                 | 4
+ * |                                 0                                 | 8
+ * +----------------+----------------+----------------+----------------+
+ *
+ * Request type specific data for unlink request:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |           unlink_id             |                0                | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                                 0                                 | 8
+ * +----------------+----------------+----------------+----------------+
+ *   unlink_id - uint16_t, request id of request to terminate
+ *
+ * seg[] array element layout:
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |                               gref                                | 4
+ * +----------------+----------------+----------------+----------------+
+ * |             offset              |             length              | 8
+ * +----------------+----------------+----------------+----------------+
+ *   gref - uint32_t, grant reference of buffer page
+ *   offset - uint16_t, offset of buffer start in page
+ *   length - uint16_t, length of buffer in page
+ *
+ *-------------------------- USB I/O response --------------------------------
+ *
+ *         0                1                 2               3        octet
+ * +----------------+----------------+----------------+----------------+
+ * |               id                |          start_frame            | 4
+ * +----------------+----------------+----------------+----------------+
+ * |                              status                               | 8
+ * +----------------+----------------+----------------+----------------+
+ * |                          actual_length                            | 12
+ * +----------------+----------------+----------------+----------------+
+ * |                           error_count                             | 16
+ * +----------------+----------------+----------------+----------------+
+ *   id - uint16_t, id of the request this response belongs to
+ *   start_frame - uint16_t, start_frame this response (iso requests only)
+ *   status - int32_t, XENUSB_STATUS_* (non-iso requests)
+ *   actual_length - uint32_t, actual size of data transferred
+ *   error_count - uint32_t, number of errors (iso requests)
+ */
+
+enum xenusb_spec_version {
+	XENUSB_VER_UNKNOWN = 0,
+	XENUSB_VER_USB11,
+	XENUSB_VER_USB20,
+	XENUSB_VER_USB30,	/* not supported yet */
+};
+
+/*
+ *  USB pipe in xenusb_request
+ *
+ *  - port number:      bits 0-4
+ *                              (USB_MAXCHILDREN is 31)
+ *
+ *  - operation flag:   bit 5
+ *                              (0 = submit urb,
+ *                               1 = unlink urb)
+ *
+ *  - direction:        bit 7
+ *                              (0 = Host-to-Device [Out]
+ *                               1 = Device-to-Host [In])
+ *
+ *  - device address:   bits 8-14
+ *
+ *  - endpoint:         bits 15-18
+ *
+ *  - pipe type:        bits 30-31
+ *                              (00 = isochronous, 01 = interrupt,
+ *                               10 = control, 11 = bulk)
+ */
+
+#define XENUSB_PIPE_PORT_MASK	0x0000001f
+#define XENUSB_PIPE_UNLINK	0x00000020
+#define XENUSB_PIPE_DIR		0x00000080
+#define XENUSB_PIPE_DEV_MASK	0x0000007f
+#define XENUSB_PIPE_DEV_SHIFT	8
+#define XENUSB_PIPE_EP_MASK	0x0000000f
+#define XENUSB_PIPE_EP_SHIFT	15
+#define XENUSB_PIPE_TYPE_MASK	0x00000003
+#define XENUSB_PIPE_TYPE_SHIFT	30
+#define XENUSB_PIPE_TYPE_ISOC	0
+#define XENUSB_PIPE_TYPE_INT	1
+#define XENUSB_PIPE_TYPE_CTRL	2
+#define XENUSB_PIPE_TYPE_BULK	3
+
+#define xenusb_pipeportnum(pipe)		((pipe) & XENUSB_PIPE_PORT_MASK)
+#define xenusb_setportnum_pipe(pipe, portnum)	((pipe) | (portnum))
+
+#define xenusb_pipeunlink(pipe)			((pipe) & XENUSB_PIPE_UNLINK)
+#define xenusb_pipesubmit(pipe)			(!xenusb_pipeunlink(pipe))
+#define xenusb_setunlink_pipe(pipe)		((pipe) | XENUSB_PIPE_UNLINK)
+
+#define xenusb_pipein(pipe)			((pipe) & XENUSB_PIPE_DIR)
+#define xenusb_pipeout(pipe)			(!xenusb_pipein(pipe))
+
+#define xenusb_pipedevice(pipe)			\
+	(((pipe) >> XENUSB_PIPE_DEV_SHIFT) & XENUSB_PIPE_DEV_MASK)
+
+#define xenusb_pipeendpoint(pipe)		\
+	(((pipe) >> XENUSB_PIPE_EP_SHIFT) & XENUSB_PIPE_EP_MASK)
+
+#define xenusb_pipetype(pipe)			\
+	(((pipe) >> XENUSB_PIPE_TYPE_SHIFT) & XENUSB_PIPE_TYPE_MASK)
+#define xenusb_pipeisoc(pipe)	(xenusb_pipetype(pipe) == XENUSB_PIPE_TYPE_ISOC)
+#define xenusb_pipeint(pipe)	(xenusb_pipetype(pipe) == XENUSB_PIPE_TYPE_INT)
+#define xenusb_pipectrl(pipe)	(xenusb_pipetype(pipe) == XENUSB_PIPE_TYPE_CTRL)
+#define xenusb_pipebulk(pipe)	(xenusb_pipetype(pipe) == XENUSB_PIPE_TYPE_BULK)
+
+#define XENUSB_MAX_SEGMENTS_PER_REQUEST (16)
+#define XENUSB_MAX_PORTNR		31
+#define XENUSB_RING_SIZE		4096
+
+/*
+ * RING for transferring urbs.
+ */
+struct xenusb_request_segment {
+	grant_ref_t gref;
+	uint16_t offset;
+	uint16_t length;
+};
+
+struct xenusb_urb_request {
+	uint16_t id;			/* request id */
+	uint16_t nr_buffer_segs;	/* number of urb->transfer_buffer segments */
+
+	/* basic urb parameter */
+	uint32_t pipe;
+	uint16_t transfer_flags;
+#define XENUSB_SHORT_NOT_OK	0x0001
+	uint16_t buffer_length;
+	union {
+		uint8_t ctrl[8];	/* setup_packet (Ctrl) */
+
+		struct {
+			uint16_t interval;	/* maximum (1024*8) in usb core */
+			uint16_t start_frame;	/* start frame */
+			uint16_t number_of_packets;	/* number of ISO packet */
+			uint16_t nr_frame_desc_segs;	/* number of iso_frame_desc segments */
+		} isoc;
+
+		struct {
+			uint16_t interval;	/* maximum (1024*8) in usb core */
+			uint16_t pad[3];
+		} intr;
+
+		struct {
+			uint16_t unlink_id;	/* unlink request id */
+			uint16_t pad[3];
+		} unlink;
+
+	} u;
+
+	/* urb data segments */
+	struct xenusb_request_segment seg[XENUSB_MAX_SEGMENTS_PER_REQUEST];
+};
+
+struct xenusb_urb_response {
+	uint16_t id;		/* request id */
+	uint16_t start_frame;	/* start frame (ISO) */
+	int32_t status;		/* status (non-ISO) */
+#define XENUSB_STATUS_OK	0
+#define XENUSB_STATUS_NODEV	(-19)
+#define XENUSB_STATUS_INVAL	(-22)
+#define XENUSB_STATUS_STALL	(-32)
+#define XENUSB_STATUS_IOERROR	(-71)
+#define XENUSB_STATUS_BABBLE	(-75)
+#define XENUSB_STATUS_SHUTDOWN	(-108)
+	int32_t actual_length;	/* actual transfer length */
+	int32_t error_count;	/* number of ISO errors */
+};
+
+DEFINE_RING_TYPES(xenusb_urb, struct xenusb_urb_request, struct xenusb_urb_response);
+#define XENUSB_URB_RING_SIZE __CONST_RING_SIZE(xenusb_urb, XENUSB_RING_SIZE)
+
+/*
+ * RING for notifying connect/disconnect events to frontend
+ */
+struct xenusb_conn_request {
+	uint16_t id;
+};
+
+struct xenusb_conn_response {
+	uint16_t id;		/* request id */
+	uint8_t portnum;	/* port number */
+	uint8_t speed;		/* usb_device_speed */
+#define XENUSB_SPEED_NONE	0
+#define XENUSB_SPEED_LOW	1
+#define XENUSB_SPEED_FULL	2
+#define XENUSB_SPEED_HIGH	3
+};
+
+DEFINE_RING_TYPES(xenusb_conn, struct xenusb_conn_request, struct xenusb_conn_response);
+#define XENUSB_CONN_RING_SIZE __CONST_RING_SIZE(xenusb_conn, XENUSB_RING_SIZE)
+
+#endif /* __XEN_PUBLIC_IO_USBIF_H__ */
diff --git a/include/xen/interface/io/vscsiif.h b/include/xen/interface/io/vscsiif.h
new file mode 100644
index 000000000..7ea4dc961
--- /dev/null
+++ b/include/xen/interface/io/vscsiif.h
@@ -0,0 +1,337 @@
+/* SPDX-License-Identifier: MIT */
+/******************************************************************************
+ * vscsiif.h
+ *
+ * Based on the blkif.h code.
+ *
+ * Copyright(c) FUJITSU Limited 2008.
+ */
+
+#ifndef __XEN__PUBLIC_IO_SCSI_H__
+#define __XEN__PUBLIC_IO_SCSI_H__
+
+#include "ring.h"
+#include "../grant_table.h"
+
+/*
+ * Feature and Parameter Negotiation
+ * =================================
+ * The two halves of a Xen pvSCSI driver utilize nodes within the XenStore to
+ * communicate capabilities and to negotiate operating parameters.  This
+ * section enumerates these nodes which reside in the respective front and
+ * backend portions of the XenStore, following the XenBus convention.
+ *
+ * Any specified default value is in effect if the corresponding XenBus node
+ * is not present in the XenStore.
+ *
+ * XenStore nodes in sections marked "PRIVATE" are solely for use by the
+ * driver side whose XenBus tree contains them.
+ *
+ *****************************************************************************
+ *                            Backend XenBus Nodes
+ *****************************************************************************
+ *
+ *------------------ Backend Device Identification (PRIVATE) ------------------
+ *
+ * p-devname
+ *      Values:         string
+ *
+ *      A free string used to identify the physical device (e.g. a disk name).
+ *
+ * p-dev
+ *      Values:         string
+ *
+ *      A string specifying the backend device: either a 4-tuple "h:c:t:l"
+ *      (host, controller, target, lun, all integers), or a WWN (e.g.
+ *      "naa.60014054ac780582:0").
+ *
+ * v-dev
+ *      Values:         string
+ *
+ *      A string specifying the frontend device in form of a 4-tuple "h:c:t:l"
+ *      (host, controller, target, lun, all integers).
+ *
+ *--------------------------------- Features ---------------------------------
+ *
+ * feature-sg-grant
+ *      Values:         unsigned [VSCSIIF_SG_TABLESIZE...65535]
+ *      Default Value:  0
+ *
+ *      Specifies the maximum number of scatter/gather elements in grant pages
+ *      supported. If not set, the backend supports up to VSCSIIF_SG_TABLESIZE
+ *      SG elements specified directly in the request.
+ *
+ *****************************************************************************
+ *                            Frontend XenBus Nodes
+ *****************************************************************************
+ *
+ *----------------------- Request Transport Parameters -----------------------
+ *
+ * event-channel
+ *      Values:         unsigned
+ *
+ *      The identifier of the Xen event channel used to signal activity
+ *      in the ring buffer.
+ *
+ * ring-ref
+ *      Values:         unsigned
+ *
+ *      The Xen grant reference granting permission for the backend to map
+ *      the sole page in a single page sized ring buffer.
+ *
+ * protocol
+ *      Values:         string (XEN_IO_PROTO_ABI_*)
+ *      Default Value:  XEN_IO_PROTO_ABI_NATIVE
+ *
+ *      The machine ABI rules governing the format of all ring request and
+ *      response structures.
+ */
+
+/*
+ * Xenstore format in practice
+ * ===========================
+ *
+ * The backend driver uses a single_host:many_devices notation to manage domU
+ * devices. Everything is stored in /local/domain/<backend_domid>/backend/vscsi/.
+ * The xenstore layout looks like this (dom0 is assumed to be the backend_domid):
+ *
+ *     <domid>/<vhost>/feature-host = "0"
+ *     <domid>/<vhost>/frontend = "/local/domain/<domid>/device/vscsi/0"
+ *     <domid>/<vhost>/frontend-id = "<domid>"
+ *     <domid>/<vhost>/online = "1"
+ *     <domid>/<vhost>/state = "4"
+ *     <domid>/<vhost>/vscsi-devs/dev-0/p-dev = "8:0:2:1" or "naa.wwn:lun"
+ *     <domid>/<vhost>/vscsi-devs/dev-0/state = "4"
+ *     <domid>/<vhost>/vscsi-devs/dev-0/v-dev = "0:0:0:0"
+ *     <domid>/<vhost>/vscsi-devs/dev-1/p-dev = "8:0:2:2"
+ *     <domid>/<vhost>/vscsi-devs/dev-1/state = "4"
+ *     <domid>/<vhost>/vscsi-devs/dev-1/v-dev = "0:0:1:0"
+ *
+ * The frontend driver maintains its state in
+ * /local/domain/<domid>/device/vscsi/.
+ *
+ *     <vhost>/backend = "/local/domain/0/backend/vscsi/<domid>/<vhost>"
+ *     <vhost>/backend-id = "0"
+ *     <vhost>/event-channel = "20"
+ *     <vhost>/ring-ref = "43"
+ *     <vhost>/state = "4"
+ *     <vhost>/vscsi-devs/dev-0/state = "4"
+ *     <vhost>/vscsi-devs/dev-1/state = "4"
+ *
+ * In addition to the entries for backend and frontend these flags are stored
+ * for the toolstack:
+ *
+ *     <domid>/<vhost>/vscsi-devs/dev-1/p-devname = "/dev/$device"
+ *     <domid>/<vhost>/libxl_ctrl_index = "0"
+ *
+ *
+ * Backend/frontend protocol
+ * =========================
+ *
+ * To create a vhost along with a device:
+ *     <domid>/<vhost>/feature-host = "0"
+ *     <domid>/<vhost>/frontend = "/local/domain/<domid>/device/vscsi/0"
+ *     <domid>/<vhost>/frontend-id = "<domid>"
+ *     <domid>/<vhost>/online = "1"
+ *     <domid>/<vhost>/state = "1"
+ *     <domid>/<vhost>/vscsi-devs/dev-0/p-dev = "8:0:2:1"
+ *     <domid>/<vhost>/vscsi-devs/dev-0/state = "1"
+ *     <domid>/<vhost>/vscsi-devs/dev-0/v-dev = "0:0:0:0"
+ * Wait for <domid>/<vhost>/state + <domid>/<vhost>/vscsi-devs/dev-0/state become 4
+ *
+ * To add another device to a vhost:
+ *     <domid>/<vhost>/state = "7"
+ *     <domid>/<vhost>/vscsi-devs/dev-1/p-dev = "8:0:2:2"
+ *     <domid>/<vhost>/vscsi-devs/dev-1/state = "1"
+ *     <domid>/<vhost>/vscsi-devs/dev-1/v-dev = "0:0:1:0"
+ * Wait for <domid>/<vhost>/state + <domid>/<vhost>/vscsi-devs/dev-1/state become 4
+ *
+ * To remove a device from a vhost:
+ *     <domid>/<vhost>/state = "7"
+ *     <domid>/<vhost>/vscsi-devs/dev-1/state = "5"
+ * Wait for <domid>/<vhost>/state to become 4
+ * Wait for <domid>/<vhost>/vscsi-devs/dev-1/state become 6
+ * Remove <domid>/<vhost>/vscsi-devs/dev-1/{state,p-dev,v-dev,p-devname}
+ * Remove <domid>/<vhost>/vscsi-devs/dev-1/
+ *
+ */
+
+/* Requests from the frontend to the backend */
+
+/*
+ * Request a SCSI operation specified via a CDB in vscsiif_request.cmnd.
+ * The target is specified via channel, id and lun.
+ *
+ * The operation to be performed is specified via a CDB in cmnd[], the length
+ * of the CDB is in cmd_len. sc_data_direction specifies the direction of data
+ * (to the device, from the device, or none at all).
+ *
+ * If data is to be transferred to or from the device the buffer(s) in the
+ * guest memory is/are specified via one or multiple scsiif_request_segment
+ * descriptors each specifying a memory page via a grant_ref_t, a offset into
+ * the page and the length of the area in that page. All scsiif_request_segment
+ * areas concatenated form the resulting data buffer used by the operation.
+ * If the number of scsiif_request_segment areas is not too large (less than
+ * or equal VSCSIIF_SG_TABLESIZE) the areas can be specified directly in the
+ * seg[] array and the number of valid scsiif_request_segment elements is to be
+ * set in nr_segments.
+ *
+ * If "feature-sg-grant" in the Xenstore is set it is possible to specify more
+ * than VSCSIIF_SG_TABLESIZE scsiif_request_segment elements via indirection.
+ * The maximum number of allowed scsiif_request_segment elements is the value
+ * of the "feature-sg-grant" entry from Xenstore. When using indirection the
+ * seg[] array doesn't contain specifications of the data buffers, but
+ * references to scsiif_request_segment arrays, which in turn reference the
+ * data buffers. While nr_segments holds the number of populated seg[] entries
+ * (plus the set VSCSIIF_SG_GRANT bit), the number of scsiif_request_segment
+ * elements referencing the target data buffers is calculated from the lengths
+ * of the seg[] elements (the sum of all valid seg[].length divided by the
+ * size of one scsiif_request_segment structure). The frontend may use a mix of
+ * direct and indirect requests.
+ */
+#define VSCSIIF_ACT_SCSI_CDB		1
+
+/*
+ * Request abort of a running operation for the specified target given by
+ * channel, id, lun and the operation's rqid in ref_rqid.
+ */
+#define VSCSIIF_ACT_SCSI_ABORT		2
+
+/*
+ * Request a device reset of the specified target (channel and id).
+ */
+#define VSCSIIF_ACT_SCSI_RESET		3
+
+/*
+ * Preset scatter/gather elements for a following request. Deprecated.
+ * Keeping the define only to avoid usage of the value "4" for other actions.
+ */
+#define VSCSIIF_ACT_SCSI_SG_PRESET	4
+
+/*
+ * Maximum scatter/gather segments per request.
+ *
+ * Considering balance between allocating at least 16 "vscsiif_request"
+ * structures on one page (4096 bytes) and the number of scatter/gather
+ * elements needed, we decided to use 26 as a magic number.
+ *
+ * If "feature-sg-grant" is set, more scatter/gather elements can be specified
+ * by placing them in one or more (up to VSCSIIF_SG_TABLESIZE) granted pages.
+ * In this case the vscsiif_request seg elements don't contain references to
+ * the user data, but to the SG elements referencing the user data.
+ */
+#define VSCSIIF_SG_TABLESIZE		26
+
+/*
+ * based on Linux kernel 2.6.18, still valid
+ *
+ * Changing these values requires support of multiple protocols via the rings
+ * as "old clients" will blindly use these values and the resulting structure
+ * sizes.
+ */
+#define VSCSIIF_MAX_COMMAND_SIZE	16
+#define VSCSIIF_SENSE_BUFFERSIZE	96
+#define VSCSIIF_PAGE_SIZE		4096
+
+struct scsiif_request_segment {
+	grant_ref_t gref;
+	uint16_t offset;
+	uint16_t length;
+};
+
+#define VSCSIIF_SG_PER_PAGE	(VSCSIIF_PAGE_SIZE / \
+				 sizeof(struct scsiif_request_segment))
+
+/* Size of one request is 252 bytes */
+struct vscsiif_request {
+	uint16_t rqid;		/* private guest value, echoed in resp  */
+	uint8_t act;		/* command between backend and frontend */
+	uint8_t cmd_len;	/* valid CDB bytes */
+
+	uint8_t cmnd[VSCSIIF_MAX_COMMAND_SIZE];	/* the CDB */
+	uint16_t timeout_per_command;	/* deprecated */
+	uint16_t channel, id, lun;	/* (virtual) device specification */
+	uint16_t ref_rqid;		/* command abort reference */
+	uint8_t sc_data_direction;	/* for DMA_TO_DEVICE(1)
+					   DMA_FROM_DEVICE(2)
+					   DMA_NONE(3) requests */
+	uint8_t nr_segments;		/* Number of pieces of scatter-gather */
+/*
+ * flag in nr_segments: SG elements via grant page
+ *
+ * If VSCSIIF_SG_GRANT is set, the low 7 bits of nr_segments specify the number
+ * of grant pages containing SG elements. Usable if "feature-sg-grant" set.
+ */
+#define VSCSIIF_SG_GRANT	0x80
+
+	struct scsiif_request_segment seg[VSCSIIF_SG_TABLESIZE];
+	uint32_t reserved[3];
+};
+
+/* Size of one response is 252 bytes */
+struct vscsiif_response {
+	uint16_t rqid;		/* identifies request */
+	uint8_t padding;
+	uint8_t sense_len;
+	uint8_t sense_buffer[VSCSIIF_SENSE_BUFFERSIZE];
+	int32_t rslt;
+	uint32_t residual_len;	/* request bufflen -
+				   return the value from physical device */
+	uint32_t reserved[36];
+};
+
+/* SCSI I/O status from vscsiif_response->rslt */
+#define XEN_VSCSIIF_RSLT_STATUS(x)  ((x) & 0x00ff)
+
+/* Host I/O status from vscsiif_response->rslt */
+#define XEN_VSCSIIF_RSLT_HOST(x)    (((x) & 0x00ff0000) >> 16)
+#define XEN_VSCSIIF_RSLT_HOST_OK                   0
+/* Couldn't connect before timeout */
+#define XEN_VSCSIIF_RSLT_HOST_NO_CONNECT           1
+/* Bus busy through timeout */
+#define XEN_VSCSIIF_RSLT_HOST_BUS_BUSY             2
+/* Timed out for other reason */
+#define XEN_VSCSIIF_RSLT_HOST_TIME_OUT             3
+/* Bad target */
+#define XEN_VSCSIIF_RSLT_HOST_BAD_TARGET           4
+/* Abort for some other reason */
+#define XEN_VSCSIIF_RSLT_HOST_ABORT                5
+/* Parity error */
+#define XEN_VSCSIIF_RSLT_HOST_PARITY               6
+/* Internal error */
+#define XEN_VSCSIIF_RSLT_HOST_ERROR                7
+/* Reset by somebody */
+#define XEN_VSCSIIF_RSLT_HOST_RESET                8
+/* Unexpected interrupt */
+#define XEN_VSCSIIF_RSLT_HOST_BAD_INTR             9
+/* Force command past mid-layer */
+#define XEN_VSCSIIF_RSLT_HOST_PASSTHROUGH         10
+/* Retry requested */
+#define XEN_VSCSIIF_RSLT_HOST_SOFT_ERROR          11
+/* Hidden retry requested */
+#define XEN_VSCSIIF_RSLT_HOST_IMM_RETRY           12
+/* Requeue command requested */
+#define XEN_VSCSIIF_RSLT_HOST_REQUEUE             13
+/* Transport error disrupted I/O */
+#define XEN_VSCSIIF_RSLT_HOST_TRANSPORT_DISRUPTED 14
+/* Transport class fastfailed */
+#define XEN_VSCSIIF_RSLT_HOST_TRANSPORT_FAILFAST  15
+/* Permanent target failure */
+#define XEN_VSCSIIF_RSLT_HOST_TARGET_FAILURE      16
+/* Permanent nexus failure on path */
+#define XEN_VSCSIIF_RSLT_HOST_NEXUS_FAILURE       17
+/* Space allocation on device failed */
+#define XEN_VSCSIIF_RSLT_HOST_ALLOC_FAILURE       18
+/* Medium error */
+#define XEN_VSCSIIF_RSLT_HOST_MEDIUM_ERROR        19
+/* Transport marginal errors */
+#define XEN_VSCSIIF_RSLT_HOST_TRANSPORT_MARGINAL  20
+
+/* Result values of reset operations */
+#define XEN_VSCSIIF_RSLT_RESET_SUCCESS  0x2002
+#define XEN_VSCSIIF_RSLT_RESET_FAILED   0x2003
+
+DEFINE_RING_TYPES(vscsiif, struct vscsiif_request, struct vscsiif_response);
+
+
+#endif  /*__XEN__PUBLIC_IO_SCSI_H__*/
diff --git a/include/xen/interface/io/xenbus.h b/include/xen/interface/io/xenbus.h
new file mode 100644
index 000000000..44456e285
--- /dev/null
+++ b/include/xen/interface/io/xenbus.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: MIT */
+/*****************************************************************************
+ * xenbus.h
+ *
+ * Xenbus protocol details.
+ *
+ * Copyright (C) 2005 XenSource Ltd.
+ */
+
+#ifndef _XEN_PUBLIC_IO_XENBUS_H
+#define _XEN_PUBLIC_IO_XENBUS_H
+
+/* The state of either end of the Xenbus, i.e. the current communication
+   status of initialisation across the bus.  States here imply nothing about
+   the state of the connection between the driver and the kernel's device
+   layers.  */
+enum xenbus_state
+{
+	XenbusStateUnknown      = 0,
+	XenbusStateInitialising = 1,
+	XenbusStateInitWait     = 2,  /* Finished early
+					 initialisation, but waiting
+					 for information from the peer
+					 or hotplug scripts. */
+	XenbusStateInitialised  = 3,  /* Initialised and waiting for a
+					 connection from the peer. */
+	XenbusStateConnected    = 4,
+	XenbusStateClosing      = 5,  /* The device is being closed
+					 due to an error or an unplug
+					 event. */
+	XenbusStateClosed       = 6,
+
+	/*
+	* Reconfiguring: The device is being reconfigured.
+	*/
+	XenbusStateReconfiguring = 7,
+
+	XenbusStateReconfigured  = 8
+};
+
+#endif /* _XEN_PUBLIC_IO_XENBUS_H */
diff --git a/include/xen/interface/io/xs_wire.h b/include/xen/interface/io/xs_wire.h
new file mode 100644
index 000000000..b62365478
--- /dev/null
+++ b/include/xen/interface/io/xs_wire.h
@@ -0,0 +1,124 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Details of the "wire" protocol between Xen Store Daemon and client
+ * library or guest kernel.
+ * Copyright (C) 2005 Rusty Russell IBM Corporation
+ */
+
+#ifndef _XS_WIRE_H
+#define _XS_WIRE_H
+
+enum xsd_sockmsg_type
+{
+    XS_CONTROL,
+#define XS_DEBUG XS_CONTROL
+    XS_DIRECTORY,
+    XS_READ,
+    XS_GET_PERMS,
+    XS_WATCH,
+    XS_UNWATCH,
+    XS_TRANSACTION_START,
+    XS_TRANSACTION_END,
+    XS_INTRODUCE,
+    XS_RELEASE,
+    XS_GET_DOMAIN_PATH,
+    XS_WRITE,
+    XS_MKDIR,
+    XS_RM,
+    XS_SET_PERMS,
+    XS_WATCH_EVENT,
+    XS_ERROR,
+    XS_IS_DOMAIN_INTRODUCED,
+    XS_RESUME,
+    XS_SET_TARGET,
+    /* XS_RESTRICT has been removed */
+    XS_RESET_WATCHES = XS_SET_TARGET + 2,
+    XS_DIRECTORY_PART,
+
+    XS_TYPE_COUNT,      /* Number of valid types. */
+
+    XS_INVALID = 0xffff /* Guaranteed to remain an invalid type */
+};
+
+#define XS_WRITE_NONE "NONE"
+#define XS_WRITE_CREATE "CREATE"
+#define XS_WRITE_CREATE_EXCL "CREATE|EXCL"
+
+/* We hand errors as strings, for portability. */
+struct xsd_errors
+{
+    int errnum;
+    const char *errstring;
+};
+#define XSD_ERROR(x) { x, #x }
+static struct xsd_errors xsd_errors[] __attribute__((unused)) = {
+    XSD_ERROR(EINVAL),
+    XSD_ERROR(EACCES),
+    XSD_ERROR(EEXIST),
+    XSD_ERROR(EISDIR),
+    XSD_ERROR(ENOENT),
+    XSD_ERROR(ENOMEM),
+    XSD_ERROR(ENOSPC),
+    XSD_ERROR(EIO),
+    XSD_ERROR(ENOTEMPTY),
+    XSD_ERROR(ENOSYS),
+    XSD_ERROR(EROFS),
+    XSD_ERROR(EBUSY),
+    XSD_ERROR(EAGAIN),
+    XSD_ERROR(EISCONN),
+    XSD_ERROR(E2BIG)
+};
+
+struct xsd_sockmsg
+{
+    uint32_t type;  /* XS_??? */
+    uint32_t req_id;/* Request identifier, echoed in daemon's response.  */
+    uint32_t tx_id; /* Transaction id (0 if not related to a transaction). */
+    uint32_t len;   /* Length of data following this. */
+
+    /* Generally followed by nul-terminated string(s). */
+};
+
+enum xs_watch_type
+{
+    XS_WATCH_PATH = 0,
+    XS_WATCH_TOKEN
+};
+
+/* Inter-domain shared memory communications. */
+#define XENSTORE_RING_SIZE 1024
+typedef uint32_t XENSTORE_RING_IDX;
+#define MASK_XENSTORE_IDX(idx) ((idx) & (XENSTORE_RING_SIZE-1))
+struct xenstore_domain_interface {
+    char req[XENSTORE_RING_SIZE]; /* Requests to xenstore daemon. */
+    char rsp[XENSTORE_RING_SIZE]; /* Replies and async watch events. */
+    XENSTORE_RING_IDX req_cons, req_prod;
+    XENSTORE_RING_IDX rsp_cons, rsp_prod;
+    uint32_t server_features; /* Bitmap of features supported by the server */
+    uint32_t connection;
+    uint32_t error;
+};
+
+/* Violating this is very bad.  See docs/misc/xenstore.txt. */
+#define XENSTORE_PAYLOAD_MAX 4096
+
+/* Violating these just gets you an error back */
+#define XENSTORE_ABS_PATH_MAX 3072
+#define XENSTORE_REL_PATH_MAX 2048
+
+/* The ability to reconnect a ring */
+#define XENSTORE_SERVER_FEATURE_RECONNECTION 1
+/* The presence of the "error" field in the ring page */
+#define XENSTORE_SERVER_FEATURE_ERROR        2
+
+/* Valid values for the connection field */
+#define XENSTORE_CONNECTED 0 /* the steady-state */
+#define XENSTORE_RECONNECT 1 /* guest has initiated a reconnect */
+
+/* Valid values for the error field */
+#define XENSTORE_ERROR_NONE    0 /* No error */
+#define XENSTORE_ERROR_COMM    1 /* Communication problem */
+#define XENSTORE_ERROR_RINGIDX 2 /* Invalid ring index */
+#define XENSTORE_ERROR_PROTO   3 /* Protocol violation (payload too long) */
+
+#endif /* _XS_WIRE_H */